2008-Apr-24 18:44:39 BEGIN executive: CIMA executive starting ... 2008-Apr-24 18:44:39 NOTE executive: STARTING NEW CIMA SESSION 2008-Apr-24 18:44:39 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-04-17 17:13 2008-Apr-24 18:44:39 INFO4 executive: This is an ON-LINE session 2008-Apr-24 18:44:39 INFO4 executive: This is a REMOTE session 2008-Apr-24 18:44:39 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Apr-24 18:44:39 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Karen O'Neil' 2008-Apr-24 18:44:39 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080424' 2008-Apr-24 18:44:40 LOG2 log_preferences: Currently applied preferences: 2008-Apr-24 18:44:40 LOG2 log_preferences: prefs(dailylog) = daily 2008-Apr-24 18:44:40 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Apr-24 18:44:40 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Apr-24 18:44:40 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Apr-24 18:44:40 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Apr-24 18:44:40 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Apr-24 18:44:40 LOG2 log_preferences: prefs(logcolours) = full 2008-Apr-24 18:44:40 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Apr-24 18:44:40 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Apr-24 18:44:40 LOG2 log_preferences: prefs(displayformat) = short 2008-Apr-24 18:44:40 LOG2 log_preferences: prefs(logformat) = new 2008-Apr-24 18:44:40 LOG2 log_preferences: prefs(fontsize) = 4 2008-Apr-24 18:44:40 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-24 18:44:40 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-24 18:44:40 ALERT executive: CIMA executive ready 2008-Apr-24 18:44:44 LOG4 got_cormsg: From DATATAKING: vw% setup 2008-Apr-24 18:44:44 NOTE frontend: CIMA frontend ready 2008-Apr-24 18:44:49 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Apr-24 18:44:49 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Apr-24 18:44:49 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-24 18:44:49 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-24 18:44:49 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-24 18:44:49 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-24 18:44:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-24 18:44:49 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-24 18:44:49 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-24 18:44:49 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-24 18:44:49 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-24 18:44:49 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-24 18:44:49 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Apr-24 18:44:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 18:44:49 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-24 18:44:49 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Apr-24 18:44:50 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Apr-24 18:44:50 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:44:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:44:55 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-24 18:44:55 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-24 18:44:55 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-24 18:44:55 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-24 18:44:55 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-24 18:44:55 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-24 18:44:55 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-24 18:44:55 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-24 18:44:55 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-24 18:44:55 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-24 18:44:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:44:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:44:58 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-24 18:44:58 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-24 18:44:58 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-24 18:44:59 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-24 18:45:32 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2008-Apr-24 18:45:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2008-Apr-24 18:45:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2008-Apr-24 18:45:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2008-Apr-24 18:45:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2008-Apr-24 18:45:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2008-Apr-24 18:45:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Apr-24 18:45:32 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-24 18:45:32 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 6 2008-Apr-24 18:45:32 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 6' 2008-Apr-24 18:45:32 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2008-Apr-24 18:45:32 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-24 18:45:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2008-Apr-24 18:45:32 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2008-Apr-24 18:45:33 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2008-Apr-24 18:45:33 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 18:45:33 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-24 18:45:33 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-24 18:45:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-24 18:45:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-24 18:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-24 18:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-24 18:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-24 18:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-24 18:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-24 18:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-24 18:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-24 18:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-24 18:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-24 18:45:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 18:45:35 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-24 18:45:35 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-24 18:45:35 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-24 18:45:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-24 18:45:35 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-24 18:45:35 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-24 18:45:35 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Apr-24 18:45:35 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-24 18:45:35 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-24 18:45:35 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-24 18:45:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-24 18:45:35 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-24 18:45:35 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-24 18:45:35 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-24 18:45:35 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-24 18:45:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 18:45:35 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-24 18:45:35 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-24 18:45:35 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-24 18:45:35 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-24 18:45:35 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-24 18:45:35 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-24 18:45:35 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-24 18:45:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-24 18:45:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 18:45:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 18:45:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 18:45:35 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-24 18:45:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 18:45:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 18:45:35 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-24 18:45:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 18:45:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-24 18:45:35 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-24 18:45:35 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-24 18:45:35 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-24 18:45:35 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-24 18:45:35 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-24 18:45:35 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-24 18:45:35 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-24 18:45:35 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-24 18:45:35 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-24 18:45:36 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-24 18:45:36 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-24 18:45:36 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-24 18:45:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-24 18:45:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:45:36 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-24 18:45:36 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Apr-24 18:45:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:45:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 18:45:51 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-24 18:45:51 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-24 18:45:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-24 18:45:51 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-24 18:45:51 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-24 18:45:51 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-24 18:45:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 18:45:51 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-24 18:45:51 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-24 18:45:51 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-24 18:45:51 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-24 18:45:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-24 18:45:51 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-24 18:45:52 START begin_task: Starting task 'selecting calibration port' 2008-Apr-24 18:45:52 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-24 18:45:52 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-24 18:45:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-24 18:45:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:45:52 START begin_task: Starting task 'waiting on calport' 2008-Apr-24 18:45:52 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-24 18:45:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:52 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-24 18:45:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:45:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 18:45:52 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-24 18:45:52 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-24 18:45:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-24 18:45:52 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-24 18:45:52 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-24 18:45:52 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-24 18:45:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 18:45:52 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-24 18:45:52 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:45:52 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-24 18:45:52 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-24 18:45:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 18:45:52 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-24 18:45:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 18:45:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 18:45:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 18:45:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 18:45:52 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:45:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:45:52 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-24 18:45:52 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-24 18:45:52 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-24 18:45:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 18:45:52 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-24 18:45:52 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-24 18:45:53 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2008-Apr-24 18:45:53 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2008-Apr-24 18:45:53 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2008-Apr-24 18:45:53 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2008-Apr-24 18:45:53 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Apr-24 18:45:53 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-24 18:45:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Apr-24 18:45:53 LOG3 track_source: Calling 'track_source galfasrc 094300.0 +215300 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2008-Apr-24 18:45:53 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 18:45:53 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-24 18:45:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Apr-24 18:45:53 INFO1 track_source: Starting to track galfasrc 2008-Apr-24 18:45:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-24 18:45:53 LOG3 vw_send: To DATATAKING: set ra 094300.0 2008-Apr-24 18:45:53 LOG3 vw_send: To DATATAKING: set dec +215300 2008-Apr-24 18:45:53 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 18:45:53 LOG3 vw_send: To DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-24 18:45:53 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-24 18:45:53 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 18:45:53 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-24 18:45:53 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 18:45:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 18:45:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 18:45:53 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-24 18:45:53 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Apr-24 18:45:53 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-24 18:45:53 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Apr-24 18:45:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 18:45:53 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Apr-24 18:45:53 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-24 18:45:53 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Apr-24 18:45:53 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Apr-24 18:45:53 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-24 18:45:53 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-24 18:45:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-24 18:45:53 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-24 18:45:53 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-24 18:45:53 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 18:45:53 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 18:45:53 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-24 18:45:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 18:45:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0000.fits 2008-Apr-24 18:45:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Apr-24 18:45:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-24 18:45:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-24 18:45:53 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080424.a2048.0000.fits} 2008-Apr-24 18:45:53 LOG4 got_cormsg: From DATATAKING: set ra 094300.0 2008-Apr-24 18:45:53 LOG4 got_cormsg: From DATATAKING: set dec +215300 2008-Apr-24 18:45:53 LOG4 got_cormsg: From DATATAKING: vw% 094300.0 2008-Apr-24 18:45:53 LOG4 got_cormsg: From DATATAKING: vw% +215300 2008-Apr-24 18:45:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 18:45:53 LOG4 got_cormsg: From DATATAKING: pnt tr 094300.0 +215300 -CJ 2008-Apr-24 18:45:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-24 18:45:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 18:45:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:45:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 18:46:35 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 18:46:35 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-24 18:46:35 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 18:46:35 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-24 18:46:35 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 18:46:35 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-24 18:46:35 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-24 18:46:35 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-24 18:46:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 18:46:35 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-24 18:46:35 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-24 18:46:35 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2008-Apr-24 18:46:35 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Apr-24 18:46:35 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-24 18:46:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 18:46:36 LOG3 waittrk: Start waittrk 5 2008-Apr-24 18:46:36 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 18:46:36 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-24 18:46:41 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 18:46:41 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-24 18:46:41 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 18:46:41 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-24 18:48:38 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 18:48:38 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-24 18:48:38 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 18:48:38 INFO2 waittrk: Now tracking galfasrc 2008-Apr-24 18:48:38 LOG4 waittrk: Current telescope position: Az = 254.47 ZA = 16.47 2008-Apr-24 18:48:38 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 18:48:38 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-24 18:48:38 DONE finish_task: DONE finished waiting: telescope on source 2008-Apr-24 18:48:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 18:48:38 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 18:48:38 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-24 18:48:38 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-24 18:48:38 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Apr-24 18:49:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 18:49:06 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-24 18:49:06 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Apr-24 18:49:06 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-24 18:49:06 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Apr-24 18:49:06 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Apr-24 18:49:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Apr-24 18:49:06 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 18:49:06 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-24 18:49:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 18:49:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 18:49:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:49:06 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 18:49:06 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-24 18:49:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 18:49:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:49:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 18:49:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 18:49:06 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-24 18:49:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 18:49:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 18:49:06 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 18:49:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 18:49:06 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-24 18:49:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 18:49:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 18:49:06 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-24 18:49:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 18:49:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 18:49:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 18:49:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 18:49:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 18:49:06 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-24 18:49:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 18:49:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 18:49:06 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-24 18:49:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 18:49:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 18:49:07 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 18:49:07 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-24 18:49:07 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 18:49:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 18:49:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 18:49:07 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-24 18:49:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:49:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:49:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:49:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:49:07 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080424.a2048.0000.fits' is empty! 2008-Apr-24 18:49:07 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Apr-24 18:49:07 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 18:49:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 18:49:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 18:49:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 18:49:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 18:49:07 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-24 18:49:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 18:49:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 18:49:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 18:49:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 18:49:07 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-24 18:49:07 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-24 18:49:07 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 18:49:07 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-24 18:49:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 18:49:07 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 18:49:07 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 18:49:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 18:49:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:49:07 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 18:49:07 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-24 18:49:07 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 18:49:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:49:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 18:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 18:49:10 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 18:49:10 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-24 18:49:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 18:49:10 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 18:49:10 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-24 18:49:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 18:49:10 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 18:49:10 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 18:49:10 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 18:49:10 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 18:49:10 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 18:49:10 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-24 18:49:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 18:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:10 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 7 6 dB 2008-Apr-24 18:49:11 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-24 18:49:11 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-24 18:49:11 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-24 18:49:11 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 18:49:11 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 18:49:11 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-24 18:49:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.958 1.025 ALFA beam 1: 1.120 1.073 2008-Apr-24 18:49:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.999 0.956 ALFA beam 3: 0.973 1.050 2008-Apr-24 18:49:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.906 0.971 ALFA beam 5: 0.994 0.888 2008-Apr-24 18:49:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.948 0.970 ALFA beam 7: 1.050 0.864 2008-Apr-24 18:49:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 18:49:11 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-24 18:49:11 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 18:49:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 18:49:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 18:49:11 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-24 18:49:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 18:49:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 18:49:11 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-24 18:49:11 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 18:49:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 18:49:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 18:49:11 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-24 18:49:11 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-24 18:49:11 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-24 18:49:11 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-24 18:49:11 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:49:11 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:49:11 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:49:11 LOG2 antvel: Parameters to Doppler: Topocentric 82150 2008 115 0.0 2008-Apr-24 18:49:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:49:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-24 18:49:11 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-24 18:49:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:49:11 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:49:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 18:49:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:49:11 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:49:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:49:11 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-24 18:49:11 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:49:11 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.591167 2008.3169997084697 18.999933 2008-Apr-24 18:49:11 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333354 2008-Apr-24 18:49:11 LOG4 log_alfabeam: ALFABEAM 1 9.709446674578810 21.849213117964808 2008-Apr-24 18:49:11 LOG4 log_alfabeam: ALFABEAM 2 9.715194782752276 21.792559234687673 2008-Apr-24 18:49:11 LOG4 log_alfabeam: ALFABEAM 3 9.722422444641989 21.826281550478331 2008-Apr-24 18:49:11 LOG4 log_alfabeam: ALFABEAM 4 9.723886300511646 21.917594491507462 2008-Apr-24 18:49:11 LOG4 log_alfabeam: ALFABEAM 5 9.718104698444213 21.974385221602656 2008-Apr-24 18:49:11 LOG4 log_alfabeam: ALFABEAM 6 9.710892909407216 21.939726516647589 2008-Apr-24 18:49:11 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500157 2008-Apr-24 18:49:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:49:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:49:11 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-24 18:49:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:49:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 18:49:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:49:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82152.00 2008-Apr-24 18:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:49:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:49:22 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-24 18:49:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:49:22 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-24 18:49:22 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-24 18:49:22 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-24 18:49:22 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-24 18:49:22 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:49:22 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:49:22 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:49:22 LOG2 antvel: Parameters to Doppler: Topocentric 82162 2008 115 0.0 2008-Apr-24 18:49:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:49:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-24 18:49:22 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-24 18:49:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:49:22 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:49:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 18:49:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:49:22 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:49:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:49:22 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-24 18:49:22 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:49:22 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.594509 2008.3170000887267 18.999933 2008-Apr-24 18:49:22 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333322 2008-Apr-24 18:49:22 LOG4 log_alfabeam: ALFABEAM 1 9.709448573350517 21.849135517156075 2008-Apr-24 18:49:22 LOG4 log_alfabeam: ALFABEAM 2 9.715199783954818 21.792543795624724 2008-Apr-24 18:49:22 LOG4 log_alfabeam: ALFABEAM 3 9.722425600973484 21.826342777595766 2008-Apr-24 18:49:22 LOG4 log_alfabeam: ALFABEAM 4 9.723884385507798 21.917672718837721 2008-Apr-24 18:49:22 LOG4 log_alfabeam: ALFABEAM 5 9.718099569102435 21.974401129809134 2008-Apr-24 18:49:22 LOG4 log_alfabeam: ALFABEAM 6 9.710889749990574 21.939663268434668 2008-Apr-24 18:49:22 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500158 2008-Apr-24 18:49:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:49:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:49:23 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-24 18:49:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:49:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 18:49:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:49:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82164.00 2008-Apr-24 18:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:49:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:49:34 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-24 18:49:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:49:34 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-24 18:49:34 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-24 18:49:34 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-24 18:49:34 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-24 18:49:34 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:49:34 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:49:34 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:49:34 LOG2 antvel: Parameters to Doppler: Topocentric 82174 2008 115 0.0 2008-Apr-24 18:49:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:49:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-24 18:49:34 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-24 18:49:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:49:34 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:49:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 18:49:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:49:34 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:49:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:49:34 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-24 18:49:34 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:49:34 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.597852 2008.3170004689837 18.999933 2008-Apr-24 18:49:34 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-24 18:49:34 LOG4 log_alfabeam: ALFABEAM 1 9.709450485533738 21.849057565983998 2008-Apr-24 18:49:34 LOG4 log_alfabeam: ALFABEAM 2 9.715204809876305 21.792528336876746 2008-Apr-24 18:49:34 LOG4 log_alfabeam: ALFABEAM 3 9.722428769005296 21.826404330890160 2008-Apr-24 18:49:34 LOG4 log_alfabeam: ALFABEAM 4 9.723882456927766 21.917751299788637 2008-Apr-24 18:49:34 LOG4 log_alfabeam: ALFABEAM 5 9.718094414257546 21.974417058136861 2008-Apr-24 18:49:34 LOG4 log_alfabeam: ALFABEAM 6 9.710886579047804 21.939599682284779 2008-Apr-24 18:49:34 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500159 2008-Apr-24 18:49:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:49:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:49:35 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-24 18:49:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:49:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 18:49:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:49:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82176.00 2008-Apr-24 18:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:49:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:49:46 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-24 18:49:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:49:46 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-24 18:49:46 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-24 18:49:46 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-24 18:49:46 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-24 18:49:46 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:49:46 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:49:46 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:49:46 LOG2 antvel: Parameters to Doppler: Topocentric 82186 2008 115 0.0 2008-Apr-24 18:49:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:49:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-24 18:49:46 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-24 18:49:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:49:46 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:49:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-24 18:49:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:49:46 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:49:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:49:46 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-24 18:49:46 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:49:46 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.601194 2008.3170008492407 18.999933 2008-Apr-24 18:49:46 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333333 2008-Apr-24 18:49:46 LOG4 log_alfabeam: ALFABEAM 1 9.709452410113592 21.848979308476572 2008-Apr-24 18:49:46 LOG4 log_alfabeam: ALFABEAM 2 9.715209857707015 21.792512867845002 2008-Apr-24 18:49:46 LOG4 log_alfabeam: ALFABEAM 3 9.722431946913893 21.826466176269825 2008-Apr-24 18:49:46 LOG4 log_alfabeam: ALFABEAM 4 9.723880515794473 21.917830189977050 2008-Apr-24 18:49:46 LOG4 log_alfabeam: ALFABEAM 5 9.718089236790020 21.974432996887231 2008-Apr-24 18:49:46 LOG4 log_alfabeam: ALFABEAM 6 9.710883398407200 21.939535793415043 2008-Apr-24 18:49:46 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500160 2008-Apr-24 18:49:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:49:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:49:47 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-24 18:49:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:49:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-24 18:49:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:49:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82188.00 2008-Apr-24 18:49:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:49:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:49:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:49:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:49:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:49:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:49:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:49:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:49:58 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-24 18:49:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:49:58 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-24 18:49:58 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-24 18:49:58 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-24 18:49:58 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-24 18:49:58 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:49:58 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:49:58 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:49:58 LOG2 antvel: Parameters to Doppler: Topocentric 82198 2008 115 0.0 2008-Apr-24 18:49:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:49:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-24 18:49:58 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-24 18:49:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:49:58 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:49:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-24 18:49:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:49:58 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:49:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:49:58 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-24 18:49:58 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:49:58 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.604537 2008.3170012294977 18.999933 2008-Apr-24 18:49:58 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-24 18:49:58 LOG4 log_alfabeam: ALFABEAM 1 9.709454348372637 21.848900695165980 2008-Apr-24 18:49:58 LOG4 log_alfabeam: ALFABEAM 2 9.715214930667166 21.792497379430273 2008-Apr-24 18:49:58 LOG4 log_alfabeam: ALFABEAM 3 9.722435136673420 21.826528353512121 2008-Apr-24 18:49:58 LOG4 log_alfabeam: ALFABEAM 4 9.723878560813592 21.917909439271234 2008-Apr-24 18:49:58 LOG4 log_alfabeam: ALFABEAM 5 9.718084033395593 21.974448955423711 2008-Apr-24 18:49:58 LOG4 log_alfabeam: ALFABEAM 6 9.710880206096030 21.939471560733629 2008-Apr-24 18:49:58 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500161 2008-Apr-24 18:49:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:49:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:49:59 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-24 18:49:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:49:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-24 18:49:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:49:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:49:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82200.00 2008-Apr-24 18:50:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:50:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:50:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:50:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:50:10 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-24 18:50:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:50:10 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-24 18:50:10 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-24 18:50:10 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-24 18:50:10 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-24 18:50:10 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:50:10 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:50:10 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:50:10 LOG2 antvel: Parameters to Doppler: Topocentric 82210 2008 115 0.0 2008-Apr-24 18:50:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:50:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-24 18:50:10 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-24 18:50:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:50:10 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:50:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-24 18:50:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:50:10 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:50:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:50:10 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-24 18:50:10 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:50:10 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.607879 2008.3170016097549 18.999933 2008-Apr-24 18:50:10 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-24 18:50:10 LOG4 log_alfabeam: ALFABEAM 1 9.709456299283771 21.848821770422909 2008-Apr-24 18:50:10 LOG4 log_alfabeam: ALFABEAM 2 9.715220025923271 21.792481881062209 2008-Apr-24 18:50:10 LOG4 log_alfabeam: ALFABEAM 3 9.722438336448421 21.826590828215856 2008-Apr-24 18:50:10 LOG4 log_alfabeam: ALFABEAM 4 9.723876593020409 21.917989002942008 2008-Apr-24 18:50:10 LOG4 log_alfabeam: ALFABEAM 5 9.718078806979261 21.974464924018118 2008-Apr-24 18:50:10 LOG4 log_alfabeam: ALFABEAM 6 9.710877003954387 21.939407019778805 2008-Apr-24 18:50:10 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500162 2008-Apr-24 18:50:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:50:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:50:11 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-24 18:50:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:50:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-24 18:50:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:50:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:50:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:50:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82212.00 2008-Apr-24 18:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:50:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:50:22 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-24 18:50:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:50:22 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-24 18:50:22 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-24 18:50:22 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-24 18:50:22 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-24 18:50:22 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:50:22 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:50:22 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:50:22 LOG2 antvel: Parameters to Doppler: Topocentric 82222 2008 115 0.0 2008-Apr-24 18:50:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:50:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-24 18:50:22 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-24 18:50:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:50:22 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:50:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-24 18:50:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:50:22 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:50:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:50:22 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-24 18:50:22 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:50:22 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.611221 2008.3170019900119 18.999933 2008-Apr-24 18:50:22 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-24 18:50:22 LOG4 log_alfabeam: ALFABEAM 1 9.709458263559000 21.848742508093970 2008-Apr-24 18:50:22 LOG4 log_alfabeam: ALFABEAM 2 9.715225145192942 21.792466368278927 2008-Apr-24 18:50:22 LOG4 log_alfabeam: ALFABEAM 3 9.722441547264827 21.826653621762485 2008-Apr-24 18:50:22 LOG4 log_alfabeam: ALFABEAM 4 9.723874611696051 21.918068907354769 2008-Apr-24 18:50:22 LOG4 log_alfabeam: ALFABEAM 5 9.718073555777908 21.974480907255291 2008-Apr-24 18:50:22 LOG4 log_alfabeam: ALFABEAM 6 9.710873790958725 21.939342148462533 2008-Apr-24 18:50:22 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500163 2008-Apr-24 18:50:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:50:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:50:23 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-24 18:50:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:50:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-24 18:50:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:50:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:50:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:50:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82224.00 2008-Apr-24 18:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:50:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:50:34 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-24 18:50:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:50:34 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-24 18:50:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-24 18:50:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 18:50:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 18:50:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 18:50:34 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-24 18:50:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 18:50:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 18:50:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 18:50:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 18:50:34 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-24 18:50:34 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-24 18:50:34 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-24 18:50:34 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-24 18:50:34 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:50:34 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:50:34 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:50:34 LOG2 antvel: Parameters to Doppler: Topocentric 82234 2008 115 0.0 2008-Apr-24 18:50:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:50:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-24 18:50:34 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-24 18:50:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:50:34 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:50:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 18:50:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:50:34 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:50:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:50:34 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-24 18:50:34 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:50:34 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.614564 2008.3170023702689 18.999933 2008-Apr-24 18:50:34 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333347 2008-Apr-24 18:50:34 LOG4 log_alfabeam: ALFABEAM 1 9.709460241928088 21.848662881594091 2008-Apr-24 18:50:34 LOG4 log_alfabeam: ALFABEAM 2 9.715230290224810 21.792450836606900 2008-Apr-24 18:50:34 LOG4 log_alfabeam: ALFABEAM 3 9.722444770162328 21.826716755948109 2008-Apr-24 18:50:34 LOG4 log_alfabeam: ALFABEAM 4 9.723872616103671 21.918149179310507 2008-Apr-24 18:50:34 LOG4 log_alfabeam: ALFABEAM 5 9.718068277996416 21.974496909731553 2008-Apr-24 18:50:34 LOG4 log_alfabeam: ALFABEAM 6 9.710870566071998 21.939276924267350 2008-Apr-24 18:50:34 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500164 2008-Apr-24 18:50:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:50:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:50:35 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-24 18:50:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:50:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 18:50:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:50:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:50:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:50:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82236.00 2008-Apr-24 18:50:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:50:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:50:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.598 > 1.4)! 2008-Apr-24 18:50:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.386 1.444 1.598 1.466 2008-Apr-24 18:50:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.360 1.343 1.406 1.473 2008-Apr-24 18:50:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.320 1.376 1.461 1.223 2008-Apr-24 18:50:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.373 1.408 1.506 1.252 2008-Apr-24 18:50:40 INFO5 check_wapp_levels: WAPP power levels are between 1.222 and 1.597 (still bad) 2008-Apr-24 18:50:42 INFO5 check_wapp_levels: WAPP power levels are between 1.222 and 1.601 (still bad) 2008-Apr-24 18:50:44 INFO5 check_wapp_levels: WAPP power levels are between 1.222 and 1.600 (still bad) 2008-Apr-24 18:50:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:50:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:50:46 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-24 18:50:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:50:46 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-24 18:50:46 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-24 18:50:46 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-24 18:50:46 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-24 18:50:46 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:50:46 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:50:46 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:50:46 LOG2 antvel: Parameters to Doppler: Topocentric 82246 2008 115 0.0 2008-Apr-24 18:50:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:50:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-24 18:50:46 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-24 18:50:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:50:46 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:50:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 18:50:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:50:46 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:50:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:50:46 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-24 18:50:46 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:50:46 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.617906 2008.3170027505259 18.999933 2008-Apr-24 18:50:46 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-24 18:50:46 LOG4 log_alfabeam: ALFABEAM 1 9.709462233345203 21.848582935817404 2008-Apr-24 18:50:46 LOG4 log_alfabeam: ALFABEAM 2 9.715235458149047 21.792435295518594 2008-Apr-24 18:50:46 LOG4 log_alfabeam: ALFABEAM 3 9.722448003287292 21.826780195898159 2008-Apr-24 18:50:46 LOG4 log_alfabeam: ALFABEAM 4 9.723870607297490 21.918229773551460 2008-Apr-24 18:50:46 LOG4 log_alfabeam: ALFABEAM 5 9.718062976577277 21.974512921674165 2008-Apr-24 18:50:46 LOG4 log_alfabeam: ALFABEAM 6 9.710867331152301 21.939211383222727 2008-Apr-24 18:50:46 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500165 2008-Apr-24 18:50:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:50:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:50:47 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-24 18:50:47 INFO5 check_wapp_levels: WAPP power levels are between 1.221 and 1.604 (still bad) 2008-Apr-24 18:50:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:50:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 18:50:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:50:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:50:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:50:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82248.00 2008-Apr-24 18:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:50:49 INFO5 check_wapp_levels: WAPP power levels are between 1.223 and 1.528 (still bad) 2008-Apr-24 18:50:51 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.526 (still bad) 2008-Apr-24 18:50:53 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.532 (still bad) 2008-Apr-24 18:50:55 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.525 (still bad) 2008-Apr-24 18:50:57 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.520 (still bad) 2008-Apr-24 18:50:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:50:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:50:58 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-24 18:50:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:50:58 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-24 18:50:58 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-24 18:50:58 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-24 18:50:58 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-24 18:50:58 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:50:58 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:50:58 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:50:58 LOG2 antvel: Parameters to Doppler: Topocentric 82258 2008 115 0.0 2008-Apr-24 18:50:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:50:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-24 18:50:58 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-24 18:50:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:50:58 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:50:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 18:50:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:50:58 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:50:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:50:58 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-24 18:50:58 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:50:58 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.621249 2008.3170031307832 18.999933 2008-Apr-24 18:50:58 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-24 18:50:58 LOG4 log_alfabeam: ALFABEAM 1 9.709464239141720 21.848502620147976 2008-Apr-24 18:50:58 LOG4 log_alfabeam: ALFABEAM 2 9.715240652269054 21.792419735900058 2008-Apr-24 18:50:58 LOG4 log_alfabeam: ALFABEAM 3 9.722451248649682 21.826843982509452 2008-Apr-24 18:50:58 LOG4 log_alfabeam: ALFABEAM 4 9.723868583933761 21.918310741104424 2008-Apr-24 18:50:58 LOG4 log_alfabeam: ALFABEAM 5 9.718057648130385 21.974528952459909 2008-Apr-24 18:50:58 LOG4 log_alfabeam: ALFABEAM 6 9.710864084191922 21.939145483078047 2008-Apr-24 18:50:58 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500166 2008-Apr-24 18:50:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:50:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:50:59 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-24 18:50:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:50:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 18:50:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:50:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:50:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:50:59 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.522 (still bad) 2008-Apr-24 18:50:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82260.00 2008-Apr-24 18:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:01 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.518 (still bad) 2008-Apr-24 18:51:03 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 1.514 (still bad) 2008-Apr-24 18:51:05 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 1.510 (still bad) 2008-Apr-24 18:51:07 INFO5 check_wapp_levels: WAPP power levels are between 1.180 and 1.509 (still bad) 2008-Apr-24 18:51:09 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.509 (still bad) 2008-Apr-24 18:51:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:51:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:51:10 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-24 18:51:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:51:10 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-24 18:51:10 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-24 18:51:10 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-24 18:51:10 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-24 18:51:10 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:51:10 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:51:10 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:51:10 LOG2 antvel: Parameters to Doppler: Topocentric 82270 2008 115 0.0 2008-Apr-24 18:51:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:51:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-24 18:51:10 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-24 18:51:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:51:10 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:51:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-24 18:51:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:51:10 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:51:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:51:10 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-24 18:51:10 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:51:10 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.624591 2008.3170035110402 18.999933 2008-Apr-24 18:51:10 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-24 18:51:10 LOG4 log_alfabeam: ALFABEAM 1 9.709466258259072 21.848421979835440 2008-Apr-24 18:51:10 LOG4 log_alfabeam: ALFABEAM 2 9.715245869690321 21.792404167252435 2008-Apr-24 18:51:10 LOG4 log_alfabeam: ALFABEAM 3 9.722454504383549 21.826908080585557 2008-Apr-24 18:51:10 LOG4 log_alfabeam: ALFABEAM 4 9.723866547079590 21.918392036352721 2008-Apr-24 18:51:10 LOG4 log_alfabeam: ALFABEAM 5 9.718052295623716 21.974544992286280 2008-Apr-24 18:51:10 LOG4 log_alfabeam: ALFABEAM 6 9.710860827061154 21.939079260196738 2008-Apr-24 18:51:10 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500167 2008-Apr-24 18:51:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:51:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:51:11 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-24 18:51:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:51:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-24 18:51:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:51:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:51:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:51:11 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.507 (still bad) 2008-Apr-24 18:51:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82272.00 2008-Apr-24 18:51:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:51:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:51:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:13 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.495 (still bad) 2008-Apr-24 18:51:15 INFO5 check_wapp_levels: WAPP power levels are between 1.176 and 1.494 (still bad) 2008-Apr-24 18:51:17 INFO5 check_wapp_levels: WAPP power levels are between 1.175 and 1.493 (still bad) 2008-Apr-24 18:51:19 INFO5 check_wapp_levels: WAPP power levels are between 1.176 and 1.493 (still bad) 2008-Apr-24 18:51:21 INFO5 check_wapp_levels: WAPP power levels are between 1.176 and 1.491 (still bad) 2008-Apr-24 18:51:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:51:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:51:22 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-24 18:51:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:51:22 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-24 18:51:22 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-24 18:51:22 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-24 18:51:22 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-24 18:51:22 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:51:22 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:51:22 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:51:22 LOG2 antvel: Parameters to Doppler: Topocentric 82282 2008 115 0.0 2008-Apr-24 18:51:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:51:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-24 18:51:22 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-24 18:51:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:51:22 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:51:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-24 18:51:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:51:22 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:51:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:51:22 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-24 18:51:22 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:51:22 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.627934 2008.3170038912972 18.999933 2008-Apr-24 18:51:22 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-24 18:51:22 LOG4 log_alfabeam: ALFABEAM 1 9.709468292048919 21.848340963790619 2008-Apr-24 18:51:22 LOG4 log_alfabeam: ALFABEAM 2 9.715251113750604 21.792388580457537 2008-Apr-24 18:51:22 LOG4 log_alfabeam: ALFABEAM 3 9.722457772513510 21.826972531486632 2008-Apr-24 18:51:22 LOG4 log_alfabeam: ALFABEAM 4 9.723864495370668 21.918473710800626 2008-Apr-24 18:51:22 LOG4 log_alfabeam: ALFABEAM 5 9.718046915631701 21.974561050533538 2008-Apr-24 18:51:22 LOG4 log_alfabeam: ALFABEAM 6 9.710857557737990 21.939012671848644 2008-Apr-24 18:51:22 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500168 2008-Apr-24 18:51:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:51:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:51:23 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-24 18:51:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:51:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-24 18:51:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:51:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:51:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:51:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82284.00 2008-Apr-24 18:51:24 INFO5 check_wapp_levels: WAPP power levels are between 1.174 and 1.491 (still bad) 2008-Apr-24 18:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:26 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 1.487 (still bad) 2008-Apr-24 18:51:28 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 1.488 (still bad) 2008-Apr-24 18:51:30 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 1.489 (still bad) 2008-Apr-24 18:51:32 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.488 (still bad) 2008-Apr-24 18:51:34 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.487 (still bad) 2008-Apr-24 18:51:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:51:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:51:34 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-24 18:51:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:51:34 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-24 18:51:34 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-24 18:51:34 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-24 18:51:34 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-24 18:51:34 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:51:34 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:51:34 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:51:34 LOG2 antvel: Parameters to Doppler: Topocentric 82294 2008 115 0.0 2008-Apr-24 18:51:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:51:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-24 18:51:34 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-24 18:51:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:51:34 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:51:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-24 18:51:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:51:34 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:51:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:51:34 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-24 18:51:34 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:51:34 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.631276 2008.3170042715542 18.999933 2008-Apr-24 18:51:34 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-24 18:51:34 LOG4 log_alfabeam: ALFABEAM 1 9.709470339439722 21.848259617623899 2008-Apr-24 18:51:34 LOG4 log_alfabeam: ALFABEAM 2 9.715256381530327 21.792372985045347 2008-Apr-24 18:51:34 LOG4 log_alfabeam: ALFABEAM 3 9.722461051161133 21.827037299689209 2008-Apr-24 18:51:34 LOG4 log_alfabeam: ALFABEAM 4 9.723862429887236 21.918555718467097 2008-Apr-24 18:51:34 LOG4 log_alfabeam: ALFABEAM 5 9.718041511148183 21.974577117369179 2008-Apr-24 18:51:34 LOG4 log_alfabeam: ALFABEAM 6 9.710854278105076 21.938945754736469 2008-Apr-24 18:51:34 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500169 2008-Apr-24 18:51:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:51:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:51:35 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-24 18:51:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:51:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-24 18:51:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:51:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:51:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:51:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82296.00 2008-Apr-24 18:51:36 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.489 (still bad) 2008-Apr-24 18:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:38 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 1.492 (still bad) 2008-Apr-24 18:51:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.497 > 1.4)! 2008-Apr-24 18:51:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.315 1.497 1.486 1.426 2008-Apr-24 18:51:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.330 1.295 1.313 1.425 2008-Apr-24 18:51:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.244 1.329 1.353 1.168 2008-Apr-24 18:51:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.337 1.360 1.466 1.210 2008-Apr-24 18:51:42 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.486 (still bad) 2008-Apr-24 18:51:44 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.493 (still bad) 2008-Apr-24 18:51:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:51:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:51:46 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-24 18:51:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:51:46 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-24 18:51:46 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-24 18:51:46 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-24 18:51:46 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-24 18:51:46 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:51:46 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31700 J 2008-Apr-24 18:51:46 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:51:46 LOG2 antvel: Parameters to Doppler: Topocentric 82306 2008 115 0.0 2008-Apr-24 18:51:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:51:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-24 18:51:46 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-24 18:51:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:51:46 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:51:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-24 18:51:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:51:46 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:51:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:51:46 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-24 18:51:46 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:51:46 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.634619 2008.3170046518112 18.999933 2008-Apr-24 18:51:46 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333336 2008-Apr-24 18:51:46 LOG4 log_alfabeam: ALFABEAM 1 9.709472401803911 21.848177889764756 2008-Apr-24 18:51:46 LOG4 log_alfabeam: ALFABEAM 2 9.715261676402257 21.792357371894457 2008-Apr-24 18:51:46 LOG4 log_alfabeam: ALFABEAM 3 9.722464342365893 21.827102427025974 2008-Apr-24 18:51:46 LOG4 log_alfabeam: ALFABEAM 4 9.723860349243962 21.918638111342176 2008-Apr-24 18:51:46 LOG4 log_alfabeam: ALFABEAM 5 9.718036078711464 21.974593202175871 2008-Apr-24 18:51:46 LOG4 log_alfabeam: ALFABEAM 6 9.710850986125919 21.938878465641061 2008-Apr-24 18:51:46 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500170 2008-Apr-24 18:51:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:51:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:51:47 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-24 18:51:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:51:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-24 18:51:47 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 1.489 (still bad) 2008-Apr-24 18:51:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:51:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:51:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:51:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82308.00 2008-Apr-24 18:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:51:49 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.489 (still bad) 2008-Apr-24 18:51:51 INFO5 check_wapp_levels: WAPP power levels are between 1.165 and 1.486 (still bad) 2008-Apr-24 18:51:53 INFO5 check_wapp_levels: WAPP power levels are between 1.165 and 1.486 (still bad) 2008-Apr-24 18:51:55 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 1.486 (still bad) 2008-Apr-24 18:51:57 INFO5 check_wapp_levels: WAPP power levels are between 1.165 and 1.486 (still bad) 2008-Apr-24 18:51:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:51:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:51:58 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-24 18:51:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:51:58 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-24 18:51:58 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Apr-24 18:51:58 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-24 18:51:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 18:51:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 18:51:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 18:51:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 18:51:58 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-24 18:51:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 18:51:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 18:51:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 18:51:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 18:51:58 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-24 18:51:58 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-24 18:51:58 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-24 18:51:58 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-24 18:51:58 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-24 18:51:58 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:51:58 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:51:58 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:51:58 LOG2 antvel: Parameters to Doppler: Topocentric 82318 2008 115 0.0 2008-Apr-24 18:51:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:51:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-24 18:51:58 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-24 18:51:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:51:58 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:51:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 18:51:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:51:58 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:51:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:51:58 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-24 18:51:58 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:51:58 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.637961 2008.3170050320684 18.999933 2008-Apr-24 18:51:58 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333336 2008-Apr-24 18:51:58 LOG4 log_alfabeam: ALFABEAM 1 9.709474478056737 21.848095826189709 2008-Apr-24 18:51:58 LOG4 log_alfabeam: ALFABEAM 2 9.715266995421356 21.792341750563814 2008-Apr-24 18:51:58 LOG4 log_alfabeam: ALFABEAM 3 9.722467644236694 21.827167877641266 2008-Apr-24 18:51:58 LOG4 log_alfabeam: ALFABEAM 4 9.723858254534429 21.918720843075150 2008-Apr-24 18:51:58 LOG4 log_alfabeam: ALFABEAM 5 9.718030621341669 21.974609295091081 2008-Apr-24 18:51:58 LOG4 log_alfabeam: ALFABEAM 6 9.710847683695684 21.938810841609790 2008-Apr-24 18:51:58 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500171 2008-Apr-24 18:51:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:51:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:51:59 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-24 18:51:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:51:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 18:51:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:51:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:51:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:51:59 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 1.487 (still bad) 2008-Apr-24 18:51:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82320.00 2008-Apr-24 18:52:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:52:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:52:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 1.487 (still bad) 2008-Apr-24 18:52:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.194 2008-Apr-24 18:52:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:52:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:52:10 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-24 18:52:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:52:10 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-24 18:52:10 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-24 18:52:10 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-24 18:52:10 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-24 18:52:10 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:52:10 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:52:10 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:52:10 LOG2 antvel: Parameters to Doppler: Topocentric 82330 2008 115 0.0 2008-Apr-24 18:52:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:52:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-24 18:52:10 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-24 18:52:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:52:10 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:52:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 18:52:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:52:10 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:52:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:52:10 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-24 18:52:10 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:52:10 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.641304 2008.3170054123254 18.999933 2008-Apr-24 18:52:10 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-24 18:52:10 LOG4 log_alfabeam: ALFABEAM 1 9.709476569591880 21.848013374838402 2008-Apr-24 18:52:10 LOG4 log_alfabeam: ALFABEAM 2 9.715272341996073 21.792326111929924 2008-Apr-24 18:52:10 LOG4 log_alfabeam: ALFABEAM 3 9.722470958828071 21.827233693849664 2008-Apr-24 18:52:10 LOG4 log_alfabeam: ALFABEAM 4 9.723856144351792 21.918803966150140 2008-Apr-24 18:52:10 LOG4 log_alfabeam: ALFABEAM 5 9.718025135540277 21.974625405498543 2008-Apr-24 18:52:10 LOG4 log_alfabeam: ALFABEAM 6 9.710844368763208 21.938742838924782 2008-Apr-24 18:52:10 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500172 2008-Apr-24 18:52:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:52:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:52:11 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-24 18:52:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:52:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 18:52:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:52:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:52:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:52:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82332.00 2008-Apr-24 18:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:52:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:52:22 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-24 18:52:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:52:22 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-24 18:52:22 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-24 18:52:22 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-24 18:52:22 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-24 18:52:22 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:52:22 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:52:22 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:52:22 LOG2 antvel: Parameters to Doppler: Topocentric 82342 2008 115 0.0 2008-Apr-24 18:52:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:52:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-24 18:52:22 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-24 18:52:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:52:22 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:52:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 18:52:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:52:22 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:52:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:52:22 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-24 18:52:22 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:52:22 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.644646 2008.3170057925824 18.999933 2008-Apr-24 18:52:22 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333347 2008-Apr-24 18:52:22 LOG4 log_alfabeam: ALFABEAM 1 9.709478675311161 21.847930582059071 2008-Apr-24 18:52:22 LOG4 log_alfabeam: ALFABEAM 2 9.715277713155508 21.792310465580780 2008-Apr-24 18:52:22 LOG4 log_alfabeam: ALFABEAM 3 9.722474284236100 21.827299839458060 2008-Apr-24 18:52:22 LOG4 log_alfabeam: ALFABEAM 4 9.723854019803227 21.918887433841181 2008-Apr-24 18:52:22 LOG4 log_alfabeam: ALFABEAM 5 9.718019624354110 21.974641523505642 2008-Apr-24 18:52:22 LOG4 log_alfabeam: ALFABEAM 6 9.710841043236353 21.938674494983623 2008-Apr-24 18:52:22 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500173 2008-Apr-24 18:52:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:52:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:52:23 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-24 18:52:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:52:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 18:52:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:52:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:52:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:52:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82344.00 2008-Apr-24 18:52:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:52:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:52:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:52:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:52:34 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-24 18:52:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:52:34 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-24 18:52:34 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-24 18:52:34 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-24 18:52:34 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-24 18:52:34 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:52:34 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:52:34 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:52:34 LOG2 antvel: Parameters to Doppler: Topocentric 82354 2008 115 0.0 2008-Apr-24 18:52:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:52:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-24 18:52:34 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-24 18:52:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:52:34 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:52:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-24 18:52:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:52:34 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:52:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:52:34 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-24 18:52:34 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:52:34 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.647989 2008.3170061728395 18.999933 2008-Apr-24 18:52:34 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2008-Apr-24 18:52:34 LOG4 log_alfabeam: ALFABEAM 1 9.709480796629977 21.847847395292927 2008-Apr-24 18:52:34 LOG4 log_alfabeam: ALFABEAM 2 9.715283112344457 21.792294802392011 2008-Apr-24 18:52:34 LOG4 log_alfabeam: ALFABEAM 3 9.722477622530569 21.827366357272613 2008-Apr-24 18:52:34 LOG4 log_alfabeam: ALFABEAM 4 9.723851879459875 21.918971299135290 2008-Apr-24 18:52:34 LOG4 log_alfabeam: ALFABEAM 5 9.718014084247116 21.974657658495957 2008-Apr-24 18:52:34 LOG4 log_alfabeam: ALFABEAM 6 9.710837705049084 21.938605765559696 2008-Apr-24 18:52:34 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500174 2008-Apr-24 18:52:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:52:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:52:35 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-24 18:52:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:52:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-24 18:52:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:52:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:52:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:52:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82356.00 2008-Apr-24 18:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:52:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:52:46 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-24 18:52:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:52:46 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-24 18:52:46 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-24 18:52:46 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-24 18:52:46 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-24 18:52:46 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:52:46 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:52:46 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:52:46 LOG2 antvel: Parameters to Doppler: Topocentric 82366 2008 115 0.0 2008-Apr-24 18:52:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:52:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-24 18:52:46 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-24 18:52:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:52:46 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:52:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-24 18:52:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:52:46 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:52:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:52:46 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-24 18:52:46 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:52:46 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.651331 2008.3170065530965 18.999933 2008-Apr-24 18:52:46 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333333 2008-Apr-24 18:52:46 LOG4 log_alfabeam: ALFABEAM 1 9.709482932436499 21.847763861265442 2008-Apr-24 18:52:46 LOG4 log_alfabeam: ALFABEAM 2 9.715288536565764 21.792279131980678 2008-Apr-24 18:52:46 LOG4 log_alfabeam: ALFABEAM 3 9.722480971794564 21.827433210757217 2008-Apr-24 18:52:46 LOG4 log_alfabeam: ALFABEAM 4 9.723849724442736 21.919055514925542 2008-Apr-24 18:52:46 LOG4 log_alfabeam: ALFABEAM 5 9.718008518293233 21.974673800546658 2008-Apr-24 18:52:46 LOG4 log_alfabeam: ALFABEAM 6 9.710834356122135 21.938536688406423 2008-Apr-24 18:52:46 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500175 2008-Apr-24 18:52:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:52:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:52:47 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-24 18:52:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:52:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-24 18:52:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:52:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:52:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:52:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82368.00 2008-Apr-24 18:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:52:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:52:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:52:58 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-24 18:52:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:52:58 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-24 18:52:58 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-24 18:52:58 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-24 18:52:58 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-24 18:52:58 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:52:58 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:52:58 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:52:58 LOG2 antvel: Parameters to Doppler: Topocentric 82378 2008 115 0.0 2008-Apr-24 18:52:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:52:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-24 18:52:58 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-24 18:52:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:52:58 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:52:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-24 18:52:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:52:58 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:52:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:52:58 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-24 18:52:58 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:52:58 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.654673 2008.3170069333537 18.999933 2008-Apr-24 18:52:58 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666672 21.883333333333315 2008-Apr-24 18:52:58 LOG4 log_alfabeam: ALFABEAM 1 9.709485083522411 21.847679952074667 2008-Apr-24 18:52:58 LOG4 log_alfabeam: ALFABEAM 2 9.715293987666140 21.792263449916952 2008-Apr-24 18:52:58 LOG4 log_alfabeam: ALFABEAM 3 9.722484333105729 21.827500423054254 2008-Apr-24 18:52:58 LOG4 log_alfabeam: ALFABEAM 4 9.723847553952231 21.919140109341054 2008-Apr-24 18:52:58 LOG4 log_alfabeam: ALFABEAM 5 9.718002924596115 21.974689954204585 2008-Apr-24 18:52:58 LOG4 log_alfabeam: ALFABEAM 6 9.710830995381810 21.938467239614766 2008-Apr-24 18:52:58 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500176 2008-Apr-24 18:52:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:52:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:52:59 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-24 18:52:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:52:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-24 18:52:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:52:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:52:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:52:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82380.00 2008-Apr-24 18:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:53:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:53:10 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-24 18:53:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:53:10 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-24 18:53:10 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-24 18:53:10 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-24 18:53:10 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-24 18:53:10 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:53:10 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:53:10 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:53:10 LOG2 antvel: Parameters to Doppler: Topocentric 82390 2008 115 0.0 2008-Apr-24 18:53:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:53:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-24 18:53:10 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-24 18:53:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:53:10 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:53:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-24 18:53:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:53:10 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 18:53:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:53:10 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-24 18:53:10 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:53:10 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.658016 2008.3170073136107 18.999933 2008-Apr-24 18:53:10 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-24 18:53:10 LOG4 log_alfabeam: ALFABEAM 1 9.709487250699818 21.847595639337186 2008-Apr-24 18:53:10 LOG4 log_alfabeam: ALFABEAM 2 9.715299467527148 21.792247751764702 2008-Apr-24 18:53:10 LOG4 log_alfabeam: ALFABEAM 3 9.722487707556720 21.827568017775416 2008-Apr-24 18:53:10 LOG4 log_alfabeam: ALFABEAM 4 9.723845367168032 21.919225110996823 2008-Apr-24 18:53:10 LOG4 log_alfabeam: ALFABEAM 5 9.717997301223400 21.974706124022379 2008-Apr-24 18:53:10 LOG4 log_alfabeam: ALFABEAM 6 9.710827621739714 21.938397394790012 2008-Apr-24 18:53:10 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500177 2008-Apr-24 18:53:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:53:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:53:11 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-24 18:53:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:53:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-24 18:53:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:53:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:53:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:53:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82392.00 2008-Apr-24 18:53:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:53:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:53:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:53:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:53:22 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-24 18:53:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:53:22 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-24 18:53:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-24 18:53:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 18:53:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 18:53:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 18:53:22 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-24 18:53:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 18:53:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 18:53:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 18:53:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 18:53:22 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-24 18:53:22 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-24 18:53:22 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-24 18:53:22 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-24 18:53:22 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:53:22 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:53:22 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:53:22 LOG2 antvel: Parameters to Doppler: Topocentric 82402 2008 115 0.0 2008-Apr-24 18:53:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:53:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-24 18:53:22 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-24 18:53:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:53:22 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:53:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 18:53:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:53:22 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:53:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:53:22 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-24 18:53:22 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:53:22 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.661358 2008.3170076938677 18.999933 2008-Apr-24 18:53:22 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2008-Apr-24 18:53:22 LOG4 log_alfabeam: ALFABEAM 1 9.709489432835952 21.847510970355017 2008-Apr-24 18:53:22 LOG4 log_alfabeam: ALFABEAM 2 9.715304973111484 21.792232047184807 2008-Apr-24 18:53:22 LOG4 log_alfabeam: ALFABEAM 3 9.722491093210790 21.827635957859730 2008-Apr-24 18:53:22 LOG4 log_alfabeam: ALFABEAM 4 9.723843165232347 21.919310472203708 2008-Apr-24 18:53:22 LOG4 log_alfabeam: ALFABEAM 5 9.717991651290488 21.974722300031612 2008-Apr-24 18:53:22 LOG4 log_alfabeam: ALFABEAM 6 9.710824237136228 21.938327192229966 2008-Apr-24 18:53:22 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500178 2008-Apr-24 18:53:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:53:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:53:23 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-24 18:53:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:53:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 18:53:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:53:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:53:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:53:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82404.00 2008-Apr-24 18:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.566 > 1.4)! 2008-Apr-24 18:53:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.375 1.247 1.566 1.443 2008-Apr-24 18:53:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.349 1.332 1.389 1.454 2008-Apr-24 18:53:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.295 1.343 1.443 1.212 2008-Apr-24 18:53:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.369 1.398 1.498 1.240 2008-Apr-24 18:53:28 INFO5 check_wapp_levels: WAPP power levels are between 1.212 and 1.567 (still bad) 2008-Apr-24 18:53:30 INFO5 check_wapp_levels: WAPP power levels are between 1.211 and 1.576 (still bad) 2008-Apr-24 18:53:32 INFO5 check_wapp_levels: WAPP power levels are between 1.212 and 1.571 (still bad) 2008-Apr-24 18:53:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:53:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:53:34 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-24 18:53:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:53:34 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-24 18:53:34 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-24 18:53:34 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-24 18:53:34 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-24 18:53:34 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:53:34 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:53:34 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:53:34 LOG2 antvel: Parameters to Doppler: Topocentric 82414 2008 115 0.0 2008-Apr-24 18:53:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:53:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-24 18:53:34 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-24 18:53:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:53:34 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:53:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 18:53:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:53:34 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:53:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:53:34 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-24 18:53:34 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:53:34 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.664701 2008.3170080741247 18.999933 2008-Apr-24 18:53:34 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333340 2008-Apr-24 18:53:34 LOG4 log_alfabeam: ALFABEAM 1 9.709491631402779 21.847425891284711 2008-Apr-24 18:53:34 LOG4 log_alfabeam: ALFABEAM 2 9.715310507957895 21.792216327056344 2008-Apr-24 18:53:34 LOG4 log_alfabeam: ALFABEAM 3 9.722494492176757 21.827704287386538 2008-Apr-24 18:53:34 LOG4 log_alfabeam: ALFABEAM 4 9.723840946659021 21.919396247244844 2008-Apr-24 18:53:34 LOG4 log_alfabeam: ALFABEAM 5 9.717985971164371 21.974738491609525 2008-Apr-24 18:53:34 LOG4 log_alfabeam: ALFABEAM 6 9.710820839467306 21.938256586390942 2008-Apr-24 18:53:34 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500179 2008-Apr-24 18:53:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:53:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:53:35 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-24 18:53:35 INFO5 check_wapp_levels: WAPP power levels are between 1.211 and 1.568 (still bad) 2008-Apr-24 18:53:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:53:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 18:53:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:53:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:53:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:53:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82416.00 2008-Apr-24 18:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:37 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.568 (still bad) 2008-Apr-24 18:53:39 INFO5 check_wapp_levels: WAPP power levels are between 1.173 and 1.514 (still bad) 2008-Apr-24 18:53:41 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.509 (still bad) 2008-Apr-24 18:53:43 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.510 (still bad) 2008-Apr-24 18:53:45 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.507 (still bad) 2008-Apr-24 18:53:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:53:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:53:46 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-24 18:53:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:53:46 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-24 18:53:46 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-24 18:53:46 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-24 18:53:46 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-24 18:53:46 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:53:46 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:53:46 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:53:46 LOG2 antvel: Parameters to Doppler: Topocentric 82426 2008 115 0.0 2008-Apr-24 18:53:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:53:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-24 18:53:46 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-24 18:53:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:53:46 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:53:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 18:53:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:53:46 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:53:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:53:46 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-24 18:53:46 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:53:46 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.668043 2008.3170084543817 18.999933 2008-Apr-24 18:53:46 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-24 18:53:46 LOG4 log_alfabeam: ALFABEAM 1 9.709493845253242 21.847340449819974 2008-Apr-24 18:53:46 LOG4 log_alfabeam: ALFABEAM 2 9.715316069001759 21.792200601069545 2008-Apr-24 18:53:46 LOG4 log_alfabeam: ALFABEAM 3 9.722497902504401 21.827772968937914 2008-Apr-24 18:53:46 LOG4 log_alfabeam: ALFABEAM 4 9.723838712604687 21.919482388035625 2008-Apr-24 18:53:46 LOG4 log_alfabeam: ALFABEAM 5 9.717980263988606 21.974754688757344 2008-Apr-24 18:53:46 LOG4 log_alfabeam: ALFABEAM 6 9.710817430686634 21.938185615941102 2008-Apr-24 18:53:46 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500180 2008-Apr-24 18:53:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:53:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:53:47 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-24 18:53:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:53:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 18:53:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:53:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:53:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:53:47 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.509 (still bad) 2008-Apr-24 18:53:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82428.00 2008-Apr-24 18:53:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:53:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:53:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:53:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:53:49 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 1.509 (still bad) 2008-Apr-24 18:53:51 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.500 (still bad) 2008-Apr-24 18:53:53 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 1.515 (still bad) 2008-Apr-24 18:53:55 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.516 (still bad) 2008-Apr-24 18:53:57 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.511 (still bad) 2008-Apr-24 18:53:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:53:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:53:58 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-24 18:53:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:53:58 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-24 18:53:58 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-24 18:53:58 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-24 18:53:58 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-24 18:53:58 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:53:58 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:53:58 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:53:58 LOG2 antvel: Parameters to Doppler: Topocentric 82438 2008 115 0.0 2008-Apr-24 18:53:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:53:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-24 18:53:58 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-24 18:53:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:53:58 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:53:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-24 18:53:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:53:58 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:53:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:53:58 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-24 18:53:58 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:53:58 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.671386 2008.317008834639 18.999933 2008-Apr-24 18:53:58 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-24 18:53:58 LOG4 log_alfabeam: ALFABEAM 1 9.709496075882868 21.847254591587443 2008-Apr-24 18:53:58 LOG4 log_alfabeam: ALFABEAM 2 9.715321659820685 21.792184860107266 2008-Apr-24 18:53:58 LOG4 log_alfabeam: ALFABEAM 3 9.722501326318520 21.827842047120800 2008-Apr-24 18:53:58 LOG4 log_alfabeam: ALFABEAM 4 9.723836461559317 21.919568949393778 2008-Apr-24 18:53:58 LOG4 log_alfabeam: ALFABEAM 5 9.717974526090080 21.974770900847123 2008-Apr-24 18:53:58 LOG4 log_alfabeam: ALFABEAM 6 9.710814008674639 21.938114234791023 2008-Apr-24 18:53:58 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500181 2008-Apr-24 18:53:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:53:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:53:59 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-24 18:53:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:53:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-24 18:53:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:53:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:53:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:53:59 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.511 (still bad) 2008-Apr-24 18:53:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82440.00 2008-Apr-24 18:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:01 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 1.531 (still bad) 2008-Apr-24 18:54:03 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 1.501 (still bad) 2008-Apr-24 18:54:05 INFO5 check_wapp_levels: WAPP power levels are between 1.163 and 1.498 (still bad) 2008-Apr-24 18:54:07 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 1.510 (still bad) 2008-Apr-24 18:54:09 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 1.520 (still bad) 2008-Apr-24 18:54:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:54:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:54:10 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-24 18:54:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:54:10 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-24 18:54:10 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-24 18:54:10 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-24 18:54:10 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-24 18:54:10 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:54:10 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:54:10 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:54:10 LOG2 antvel: Parameters to Doppler: Topocentric 82450 2008 115 0.0 2008-Apr-24 18:54:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:54:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-24 18:54:10 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-24 18:54:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:54:10 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:54:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-24 18:54:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:54:10 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:54:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:54:10 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-24 18:54:10 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:54:10 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.674728 2008.317009214896 18.999933 2008-Apr-24 18:54:10 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2008-Apr-24 18:54:10 LOG4 log_alfabeam: ALFABEAM 1 9.709498322130083 21.847168364678478 2008-Apr-24 18:54:10 LOG4 log_alfabeam: ALFABEAM 2 9.715327277322313 21.792169113889170 2008-Apr-24 18:54:10 LOG4 log_alfabeam: ALFABEAM 3 9.722504761655255 21.827911484154413 2008-Apr-24 18:54:10 LOG4 log_alfabeam: ALFABEAM 4 9.723834194694248 21.919655882833190 2008-Apr-24 18:54:10 LOG4 log_alfabeam: ALFABEAM 5 9.717968760640995 21.974787117849580 2008-Apr-24 18:54:10 LOG4 log_alfabeam: ALFABEAM 6 9.710810575398481 21.938042481985295 2008-Apr-24 18:54:10 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500182 2008-Apr-24 18:54:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:54:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:54:11 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-24 18:54:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:54:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-24 18:54:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:54:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:54:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:54:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82452.00 2008-Apr-24 18:54:12 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 1.524 (still bad) 2008-Apr-24 18:54:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:54:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:54:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:54:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:54:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:54:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:14 INFO5 check_wapp_levels: WAPP power levels are between 1.159 and 1.528 (still bad) 2008-Apr-24 18:54:16 INFO5 check_wapp_levels: WAPP power levels are between 1.159 and 1.531 (still bad) 2008-Apr-24 18:54:18 INFO5 check_wapp_levels: WAPP power levels are between 1.158 and 1.535 (still bad) 2008-Apr-24 18:54:20 INFO5 check_wapp_levels: WAPP power levels are between 1.159 and 1.490 (still bad) 2008-Apr-24 18:54:22 INFO5 check_wapp_levels: WAPP power levels are between 1.158 and 1.486 (still bad) 2008-Apr-24 18:54:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:54:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:54:22 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-24 18:54:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:54:22 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-24 18:54:22 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-24 18:54:22 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-24 18:54:22 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-24 18:54:22 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:54:22 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:54:22 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:54:22 LOG2 antvel: Parameters to Doppler: Topocentric 82462 2008 115 0.0 2008-Apr-24 18:54:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:54:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-24 18:54:22 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-24 18:54:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:54:22 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:54:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-24 18:54:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:54:22 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:54:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:54:22 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-24 18:54:22 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:54:22 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.678071 2008.317009595153 18.999933 2008-Apr-24 18:54:22 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2008-Apr-24 18:54:22 LOG4 log_alfabeam: ALFABEAM 1 9.709500585514514 21.847081714180273 2008-Apr-24 18:54:22 LOG4 log_alfabeam: ALFABEAM 2 9.715332925123864 21.792153353303334 2008-Apr-24 18:54:22 LOG4 log_alfabeam: ALFABEAM 3 9.722508210655583 21.827981325184176 2008-Apr-24 18:54:22 LOG4 log_alfabeam: ALFABEAM 4 9.723831910474999 21.919743243715700 2008-Apr-24 18:54:22 LOG4 log_alfabeam: ALFABEAM 5 9.717962963927327 21.974803349129946 2008-Apr-24 18:54:22 LOG4 log_alfabeam: ALFABEAM 6 9.710807128722852 21.937970310877422 2008-Apr-24 18:54:22 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500183 2008-Apr-24 18:54:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:54:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:54:23 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-24 18:54:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:54:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-24 18:54:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:54:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:54:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:54:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82464.00 2008-Apr-24 18:54:24 INFO5 check_wapp_levels: WAPP power levels are between 1.159 and 1.486 (still bad) 2008-Apr-24 18:54:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:54:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:54:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:54:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:54:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:54:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:26 INFO5 check_wapp_levels: WAPP power levels are between 1.158 and 1.483 (still bad) 2008-Apr-24 18:54:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.481 > 1.4)! 2008-Apr-24 18:54:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.309 1.411 1.481 1.423 2008-Apr-24 18:54:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.323 1.285 1.296 1.407 2008-Apr-24 18:54:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.221 1.300 1.337 1.157 2008-Apr-24 18:54:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.335 1.354 1.461 1.202 2008-Apr-24 18:54:30 INFO5 check_wapp_levels: WAPP power levels are between 1.157 and 1.488 (still bad) 2008-Apr-24 18:54:32 INFO5 check_wapp_levels: WAPP power levels are between 1.158 and 1.484 (still bad) 2008-Apr-24 18:54:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:54:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:54:34 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-24 18:54:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:54:34 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-24 18:54:34 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-24 18:54:34 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-24 18:54:34 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-24 18:54:34 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:54:34 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:54:34 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:54:34 LOG2 antvel: Parameters to Doppler: Topocentric 82474 2008 115 0.0 2008-Apr-24 18:54:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:54:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-24 18:54:34 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-24 18:54:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:54:34 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:54:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-24 18:54:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:54:34 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 18:54:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 18:54:34 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-24 18:54:34 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 18:54:34 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.681413 2008.31700997541 18.999933 2008-Apr-24 18:54:34 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333333 2008-Apr-24 18:54:34 LOG4 log_alfabeam: ALFABEAM 1 9.709502864859827 21.846994688588008 2008-Apr-24 18:54:34 LOG4 log_alfabeam: ALFABEAM 2 9.715338600104799 21.792137588098992 2008-Apr-24 18:54:34 LOG4 log_alfabeam: ALFABEAM 3 9.722511671341829 21.828051532060581 2008-Apr-24 18:54:34 LOG4 log_alfabeam: ALFABEAM 4 9.723829610087876 21.919830983147506 2008-Apr-24 18:54:34 LOG4 log_alfabeam: ALFABEAM 5 9.717957139150377 21.974819584628378 2008-Apr-24 18:54:34 LOG4 log_alfabeam: ALFABEAM 6 9.710803670628604 21.937897760894561 2008-Apr-24 18:54:34 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500184 2008-Apr-24 18:54:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 18:54:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 18:54:35 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-24 18:54:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 18:54:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-24 18:54:35 INFO5 check_wapp_levels: WAPP power levels are between 1.157 and 1.483 (still bad) 2008-Apr-24 18:54:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:54:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:54:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:54:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82476.00 2008-Apr-24 18:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 18:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 18:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 18:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 18:54:37 INFO5 check_wapp_levels: WAPP power levels are between 1.157 and 1.483 (still bad) 2008-Apr-24 18:54:39 INFO5 check_wapp_levels: WAPP power levels are between 1.154 and 1.483 (still bad) 2008-Apr-24 18:54:41 INFO5 check_wapp_levels: WAPP power levels are between 1.155 and 1.487 (still bad) 2008-Apr-24 18:54:43 INFO5 check_wapp_levels: WAPP power levels are between 1.155 and 1.485 (still bad) 2008-Apr-24 18:54:45 INFO5 check_wapp_levels: WAPP power levels are between 1.153 and 1.483 (still bad) 2008-Apr-24 18:54:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 18:54:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 18:54:46 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-24 18:54:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 18:54:46 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-24 18:54:46 INFO2 smartfreq: Switching off CAL 2008-Apr-24 18:54:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 18:54:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 18:54:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 18:54:46 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-24 18:54:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 18:54:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 18:54:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 18:54:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 18:54:46 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-24 18:54:46 INFO3 restore_frequencies: Restoring original frequencies 2008-Apr-24 18:54:46 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2008-Apr-24 18:54:46 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2008.31701 J 2008-Apr-24 18:54:46 LOG2 antvel: Computed apparent RA = 09:43:29.3 Dec = +21:50:44.1 2008-Apr-24 18:54:46 LOG2 antvel: Parameters to Doppler: Topocentric 82486 2008 115 0.0 2008-Apr-24 18:54:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 18:54:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2008-Apr-24 18:54:46 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2008-Apr-24 18:54:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 18:54:46 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 18:54:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-24 18:54:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:54:46 STOP finish_task: Finishing task 'smart frequency switching' 2008-Apr-24 18:54:46 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-24 18:54:46 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Apr-24 18:54:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 18:54:46 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Apr-24 18:54:46 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-24 18:54:46 NOTE run_command_file: DONE with command file processing 2008-Apr-24 18:54:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-24 18:54:46 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2008-Apr-24 18:54:46 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-24 18:54:46 DONE finish_task: DONE finished running: command file 'command_galfasrc.cmd' 2008-Apr-24 18:54:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 18:54:47 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'OK' 2008-Apr-24 18:54:47 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-24 18:54:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-24 18:54:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:54:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:54:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:54:47 INFO5 check_wapp_levels: WAPP power levels are between 1.154 and 1.481 (still bad) 2008-Apr-24 18:55:19 INFO1 CIMA-run_command_file: Transferring command file '080424_obs.cmd ' to executive ... 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {FIXEDDRIFT az=260.37 alfaangle=-65.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_150 ra=95300.00 dec=200930.00} 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 11 {FIXEDDRIFT az=257.13 alfaangle=-59.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_152 ra=95300.00 dec=200630.00} 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 15 {FIXEDDRIFT az=240.99 alfaangle=-39.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_154 ra=95300.00 dec=200330.00} 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 19 {FIXEDDRIFT az=118.28 alfaangle=78.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_156 ra=95300.00 dec=200030.00} 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 23 {FIXEDDRIFT az=101.89 alfaangle=-81.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_158 ra=95300.00 dec=195730.00} 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 27 {FIXEDDRIFT az=98.60 alfaangle=-75.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_160 ra=95300.00 dec=195430.00} 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 31 {FIXEDDRIFT az=311.98 alfaangle=60.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_049 ra=120900.00 dec=74800.00} 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 35 {FIXEDDRIFT az=331.56 alfaangle=42.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_051 ra=120900.00 dec=74500.00} 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 39 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_053 ra=120900.00 dec=74200.00} 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 43 {FIXEDDRIFT az=28.23 alfaangle=-4.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_055 ra=120900.00 dec=73900.00} 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 47 {FIXEDDRIFT az=47.49 alfaangle=-21.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_057 ra=120900.00 dec=73600.00} 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 51 {FIXEDDRIFT az=48.01 alfaangle=-21.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_059 ra=122900.00 dec=73300.00} 2008-Apr-24 18:55:19 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: run_command_file 080424_obs.cmd 1 1 14 2008-Apr-24 18:55:19 LOG4 run_command_file: Calling 'run_command_file 080424_obs.cmd 1 1 14' 2008-Apr-24 18:55:19 BEGIN begin_task: Starting task 'running command file '080424_obs.cmd'' 2008-Apr-24 18:55:19 LOG5 begin_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-24 18:55:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080424_obs.cmd' ...} 2008-Apr-24 18:55:19 NOTE run_command_file: Starting execution of command file '080424_obs.cmd' from line 1 2008-Apr-24 18:55:19 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Apr-24 18:55:19 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-24 18:55:19 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 18:55:19 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-24 18:55:19 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-24 18:55:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-24 18:55:21 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 18:55:21 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-24 18:55:21 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-24 18:55:21 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-24 18:55:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-24 18:55:21 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-24 18:55:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 18:55:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 18:55:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 18:55:21 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-24 18:55:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 18:55:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 18:55:21 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-24 18:55:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 18:55:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 18:55:22 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-24 18:55:22 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-24 18:55:22 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-24 18:55:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-24 18:55:22 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-24 18:55:22 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-24 18:55:22 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-24 18:55:22 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-24 18:55:22 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-24 18:55:22 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-24 18:55:22 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-24 18:55:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-24 18:55:22 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-24 18:55:22 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-24 18:55:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-24 18:55:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:55:22 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-24 18:55:22 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-24 18:55:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-24 18:55:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-24 18:55:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 18:55:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:55:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:55:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:55:22 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-24 18:55:22 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-24 18:55:22 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-24 18:55:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-24 18:55:22 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-24 18:55:22 LOG5 finish_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-24 18:55:22 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-24 18:55:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 18:55:22 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-24 18:55:22 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-24 18:55:22 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-24 18:55:22 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-24 18:55:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-24 18:55:22 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-24 18:55:22 START begin_task: Starting task 'selecting calibration port' 2008-Apr-24 18:55:22 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-24 18:55:22 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-24 18:55:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-24 18:55:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:55:22 START begin_task: Starting task 'waiting on calport' 2008-Apr-24 18:55:22 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-24 18:55:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:55:22 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-24 18:55:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:55:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:55:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 18:55:23 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-24 18:55:23 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-24 18:55:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-24 18:55:23 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-24 18:55:23 LOG5 finish_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-24 18:55:23 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-24 18:55:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 18:55:23 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-24 18:55:23 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-24 18:55:23 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-24 18:55:23 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-24 18:55:23 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-24 18:55:23 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-24 18:55:23 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-24 18:55:23 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-24 18:55:23 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-24 18:55:23 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-24 18:55:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:55:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:55:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:55:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 18:55:23 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-24 18:55:23 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-24 18:55:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 18:55:23 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-24 18:55:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-24 18:55:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:55:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 18:55:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-24 18:55:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 18:55:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 18:55:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 18:55:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 18:55:23 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-24 18:55:23 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-24 18:55:23 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-24 18:55:23 LOG5 finish_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-24 18:55:23 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-24 18:55:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 18:55:23 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-24 18:55:23 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-24 18:55:23 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Apr-24 18:55:23 COMMAND run_command_line: EXECUTING command 7: 'FIXEDDRIFT az=260.37 alfaangle=-65.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_150 ra=95300.00 dec=200930.00' 2008-Apr-24 18:55:23 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-24 18:55:23 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-24 18:55:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 18:55:24 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 260.37 -65.3 hcorcal 5 tracking no first 1 AGES3193_p1_150 95300.00 200930.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 18:55:24 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-24 18:55:24 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-24 18:55:24 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2008-Apr-24 18:55:24 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-24 18:55:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_150} 2008-Apr-24 18:55:24 INFO3 fixed_driftmap: Sending telescope to Az = 260.37 and ZA = 14.02 2008-Apr-24 18:55:24 LOG3 track_source: Calling 'track_source AGES3193_p1_150 260.37 14.0240892332 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 18:55:24 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 18:55:24 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-24 18:55:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_150} INFO {Slewing to source 'AGES3193_p1_150' ...} 2008-Apr-24 18:55:24 INFO1 track_source: Starting to track AGES3193_p1_150 2008-Apr-24 18:55:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_150" 2008-Apr-24 18:55:24 LOG3 vw_send: To DATATAKING: set ra 260.37 2008-Apr-24 18:55:24 LOG3 vw_send: To DATATAKING: set dec 14.0240892332 2008-Apr-24 18:55:24 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 18:55:24 LOG3 vw_send: To DATATAKING: pnt tr 260.37 14.0240892332 -CF 2008-Apr-24 18:55:25 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 18:55:25 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 18:55:25 LOG5 finish_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-24 18:55:25 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 18:55:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 18:55:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 18:55:25 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-24 18:55:25 START begin_task: Starting task 'rotate ALFA to -65.3 degrees' 2008-Apr-24 18:55:25 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-24 18:55:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -65.3 degrees ...} 2008-Apr-24 18:55:25 INFO2 rotate_alfa: ALFA commanded to -65.3 degrees 2008-Apr-24 18:55:25 LOG3 sock_errsend: To ALFAMOTOR: POSITION -65.3 REPLY 2008-Apr-24 18:55:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 18:55:25 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 18:55:25 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-24 18:55:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_150" 2008-Apr-24 18:55:25 LOG4 got_cormsg: From DATATAKING: set ra 260.37 2008-Apr-24 18:55:25 LOG4 got_cormsg: From DATATAKING: set dec 14.0240892332 2008-Apr-24 18:55:25 LOG4 got_cormsg: From DATATAKING: vw% 260.37 2008-Apr-24 18:55:25 LOG4 got_cormsg: From DATATAKING: vw% 14.0240892332 2008-Apr-24 18:55:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:55:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 18:55:25 LOG4 got_cormsg: From DATATAKING: pnt tr 260.37 14.0240892332 -CF 2008-Apr-24 18:55:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 18:55:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 18:55:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:56:12 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 18:56:12 INFO3 alfa_motor: ALFA rotator in-position -65.30 degrees 2008-Apr-24 18:56:12 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 18:56:12 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-24 18:56:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 18:56:12 STOP finish_task: Finishing task 'rotate ALFA to -65.3 degrees' 2008-Apr-24 18:56:12 LOG5 finish_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-24 18:56:12 INFO2 finish_task: DONE finished configuration: rotating ALFA to -65.3 degrees 2008-Apr-24 18:56:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 18:56:12 STOP end_task: Finishing task 'rotate ALFA to -65.3 degrees' with status 'OK' 2008-Apr-24 18:56:12 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-24 18:56:12 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 18:56:12 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-24 18:56:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 18:56:12 LOG3 waittrk: Start waittrk 5 2008-Apr-24 18:56:12 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 18:56:12 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-24 18:56:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 18:56:17 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-24 18:56:17 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 18:56:17 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-24 18:56:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 18:56:17 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-24 18:56:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 18:56:17 INFO2 waittrk: Now tracking AGES3193_p1_150 2008-Apr-24 18:56:17 LOG4 waittrk: Current telescope position: Az = 259.92 ZA = 14.03 2008-Apr-24 18:56:17 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 18:56:17 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-24 18:56:17 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 18:56:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 18:56:17 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 18:56:17 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-24 18:56:17 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 18:56:17 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-24 18:56:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 18:56:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 18:56:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:56:17 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 18:56:17 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-24 18:56:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 18:56:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 18:56:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:56:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 18:56:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 18:56:18 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-24 18:56:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 18:56:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 18:56:18 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 18:56:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 18:56:18 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-24 18:56:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 18:56:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 18:56:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 18:56:18 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-24 18:56:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 18:56:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 18:56:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 18:56:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 18:56:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 18:56:18 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-24 18:56:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 18:56:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 18:56:18 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-24 18:56:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 18:56:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 18:56:18 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 18:56:18 LOG5 finish_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-24 18:56:18 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 18:56:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 18:56:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 18:56:18 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-24 18:56:18 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-24 18:56:18 INFO2 astwait: Waiting for 652 seconds from 22:56:18 to 23:07:10 UTC ... 2008-Apr-24 18:56:18 LOG4 send_obs_status: To obs_status: <1> TASKTIME 652 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 18:56:18 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-24 18:56:18 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-24 19:07:10 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-24 19:07:10 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-24 19:07:10 INFO3 astwait: Finished waiting 2008-Apr-24 19:07:10 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 19:07:10 LOG5 dopset_later: Calling 'dopset_later 60.896552381487687' 2008-Apr-24 19:07:10 INFO3 dopset_later: Setting Doppler correction for 19:08:10 (60.9 seconds from now) 2008-Apr-24 19:07:10 LOG5 antvel: Calling 'antvel 260.370000 14.024089 F 60.896552381487687' 2008-Apr-24 19:07:10 LOG2 antvel: Parameters to Doppler: Heliocentric 83290 2008 115 0.0 2008-Apr-24 19:07:10 INFO5 antvel: Computed antenna velocity: +27.60734 km/s 2008-Apr-24 19:07:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.607336736899999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-24 19:07:10 INFO4 dopset_gen: New sky frequencies: 1381.116244 1381.116244 1381.116244 1381.116244 1381.116244 1381.116244 1381.116244 1381.116244 1381.116244 2008-Apr-24 19:07:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.116244 sky0=1381.116244 sky1=1381.116244 sky2=1381.116244 sky3=1381.116244 sky4=1381.116244 sky5=1381.116244 sky6=1381.116244 sky7=1381.116244 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 19:07:10 LOG2 dopset_gen: Result from 'sky2syn': 1631.116244 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 19:07:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631116244.0} 2008-Apr-24 19:07:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 19:07:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-24 19:07:10 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-24 19:07:10 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.1 Dec = +20:09:30.6 2008-Apr-24 19:07:10 LOG3 track_source: Calling 'track_source AGES3193_p1_150 095203.1 200930.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 19:07:10 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 19:07:10 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-24 19:07:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_150} INFO {Slewing to source 'AGES3193_p1_150' ...} 2008-Apr-24 19:07:10 INFO1 track_source: Starting to track AGES3193_p1_150 2008-Apr-24 19:07:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_150" 2008-Apr-24 19:07:10 LOG3 vw_send: To DATATAKING: set ra 095203.1 2008-Apr-24 19:07:10 LOG3 vw_send: To DATATAKING: set dec 200930.6 2008-Apr-24 19:07:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 19:07:10 LOG3 vw_send: To DATATAKING: pnt tr 095203.1 200930.6 -CJ 2008-Apr-24 19:07:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:07:10 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 19:07:10 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-24 19:07:10 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 19:07:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:07:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 19:07:10 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-24 19:07:10 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 19:07:10 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-24 19:07:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 19:07:10 LOG3 waittrk: Start waittrk 5 2008-Apr-24 19:07:10 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 19:07:10 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-24 19:07:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631116244.0} 2008-Apr-24 19:07:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 19:07:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_150" 2008-Apr-24 19:07:10 LOG4 got_cormsg: From DATATAKING: set ra 095203.1 2008-Apr-24 19:07:10 LOG4 got_cormsg: From DATATAKING: set dec 200930.6 2008-Apr-24 19:07:10 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 095203.1 2008-Apr-24 19:07:10 LOG4 got_cormsg: From DATATAKING: vw% 200930.6 2008-Apr-24 19:07:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:07:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 19:07:10 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.1 200930.6 -CJ 2008-Apr-24 19:07:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:07:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 19:07:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:07:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 19:07:15 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-24 19:07:15 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 19:07:15 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-24 19:07:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 19:07:17 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-24 19:07:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 19:07:17 INFO2 waittrk: Now tracking AGES3193_p1_150 2008-Apr-24 19:07:17 LOG4 waittrk: Current telescope position: Az = 259.91 ZA = 14.01 2008-Apr-24 19:07:17 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 19:07:17 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-24 19:07:17 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 19:07:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:07:17 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 19:07:17 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-24 19:07:17 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 19:07:17 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-24 19:07:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 19:07:17 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 19:07:17 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 19:07:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 19:07:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:07:17 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 19:07:17 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-24 19:07:18 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 19:07:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:07:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:07:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 19:07:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 19:07:21 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-24 19:07:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 19:07:21 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 19:07:21 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-24 19:07:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 19:07:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 19:07:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 19:07:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 19:07:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 19:07:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 19:07:21 LOG5 begin_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-24 19:07:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 19:07:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:07:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 7 6 dB 2008-Apr-24 19:07:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 6 6 dB 2008-Apr-24 19:07:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-24 19:07:21 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-24 19:07:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 19:07:21 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 19:07:21 LOG5 end_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-24 19:07:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.964 0.780 ALFA beam 1: 1.079 0.965 2008-Apr-24 19:07:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.986 0.893 ALFA beam 3: 0.937 1.013 2008-Apr-24 19:07:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.076 0.917 ALFA beam 5: 1.015 0.903 2008-Apr-24 19:07:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.982 0.965 ALFA beam 7: 1.078 1.066 2008-Apr-24 19:07:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 19:07:21 LOG5 finish_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-24 19:07:21 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 19:07:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:07:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 19:07:21 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 19:07:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 19:07:22 LOG5 finish_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 19:07:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:07:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 19:07:22 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 19:07:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 19:07:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 19:07:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 19:07:22 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-24 19:07:22 START begin_task: Starting task 'WAPP calibration' 2008-Apr-24 19:07:22 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-24 19:07:22 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-24 19:07:22 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 19:07:22 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 19:07:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 19:07:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:07:22 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 19:07:22 LOG5 begin_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 19:07:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 19:07:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:07:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:07:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 19:07:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 19:07:22 LOG5 end_task: Level: (5) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 19:07:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 19:07:22 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 19:07:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 19:07:22 LOG5 begin_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:07:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 19:07:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 19:07:22 LOG5 end_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 19:07:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 19:07:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 19:07:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 19:07:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 19:07:22 LOG5 begin_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0001.fits 2008-Apr-24 19:07:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 19:07:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 19:07:22 LOG5 end_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 19:07:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 19:07:22 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 19:07:22 LOG5 finish_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-24 19:07:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:07:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 19:07:22 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-24 19:07:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 19:07:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 19:07:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 19:07:22 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-24 19:07:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080424.a2048.0001.fits} 2008-Apr-24 19:07:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 19:07:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 19:07:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 19:07:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 19:07:22 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-24 19:07:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-24 19:07:23 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-24 19:07:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 19:07:23 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-24 19:07:23 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 19:07:23 LOG5 log_alfabeam: Parameters: 9.867527777777779 20.1585 8.895331 2008.3170343118616 -65.300018 2008-Apr-24 19:07:23 LOG4 log_alfabeam: ALFABEAM 0 9.867527777777779 20.158500000000004 2008-Apr-24 19:07:23 LOG4 log_alfabeam: ALFABEAM 1 9.868745310775976 20.068542416298776 2008-Apr-24 19:07:23 LOG4 log_alfabeam: ALFABEAM 2 9.874609411093207 20.128257569794911 2008-Apr-24 19:07:23 LOG4 log_alfabeam: ALFABEAM 3 9.873367844276549 20.218713491986346 2008-Apr-24 19:07:23 LOG4 log_alfabeam: ALFABEAM 4 9.866268483636045 20.248281781989025 2008-Apr-24 19:07:23 LOG4 log_alfabeam: ALFABEAM 5 9.860439274902067 20.188153118913643 2008-Apr-24 19:07:23 LOG4 log_alfabeam: ALFABEAM 6 9.861674532578787 20.098868941511775 2008-Apr-24 19:07:23 INFO2 take_spectra: Starting WAPP scan: 811500185 2008-Apr-24 19:07:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 19:07:23 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 19:07:23 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-24 19:07:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 19:07:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.780 < 0.8)! 2008-Apr-24 19:07:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 0.780 1.079 0.965 2008-Apr-24 19:07:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.893 0.937 1.013 2008-Apr-24 19:07:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.917 1.015 0.903 2008-Apr-24 19:07:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 0.965 1.078 1.066 2008-Apr-24 19:07:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83244.00 2008-Apr-24 19:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.116244 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 19:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 19:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 1.454 (still bad) 2008-Apr-24 19:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:07:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 19:07:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 19:07:29 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-24 19:07:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 19:07:29 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-24 19:07:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 19:07:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 19:07:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 19:07:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 19:07:29 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-24 19:07:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 19:07:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 19:07:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 19:07:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 19:07:29 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-24 19:07:30 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-24 19:07:30 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-24 19:07:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 19:07:30 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-24 19:07:30 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 19:07:30 LOG5 log_alfabeam: Parameters: 9.867527777777779 20.1585 8.897280 2008.317034533678 -65.300018 2008-Apr-24 19:07:30 LOG4 log_alfabeam: ALFABEAM 0 9.867527777777779 20.158500000000004 2008-Apr-24 19:07:30 LOG4 log_alfabeam: ALFABEAM 1 9.868747416047636 20.068548010058443 2008-Apr-24 19:07:30 LOG4 log_alfabeam: ALFABEAM 2 9.874610129005827 20.128290559332015 2008-Apr-24 19:07:30 LOG4 log_alfabeam: ALFABEAM 3 9.873366388123120 20.218741772588348 2008-Apr-24 19:07:30 LOG4 log_alfabeam: ALFABEAM 4 9.866266297870055 20.248275635512080 2008-Apr-24 19:07:30 LOG4 log_alfabeam: ALFABEAM 5 9.860438563867197 20.188119024815371 2008-Apr-24 19:07:30 LOG4 log_alfabeam: ALFABEAM 6 9.861675938693068 20.098841875003181 2008-Apr-24 19:07:30 INFO2 take_spectra: Starting WAPP scan: 811500186 2008-Apr-24 19:07:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 19:07:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 19:07:30 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-24 19:07:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 19:07:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83251.00 2008-Apr-24 19:07:35 INFO5 check_wapp_levels: WAPP power levels are between 1.014 and 1.498 (still bad) 2008-Apr-24 19:07:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.116244 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 19:07:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:07:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:07:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 19:07:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:07:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:07:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:07:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:07:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:07:36 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-24 19:07:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 19:07:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 19:07:36 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-24 19:07:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 19:07:36 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-24 19:07:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 19:07:36 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-24 19:07:36 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-24 19:07:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-24 19:07:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:07:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-24 19:07:36 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-24 19:07:36 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-24 19:07:37 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 260.37 and ZA = 14.02 2008-Apr-24 19:07:37 LOG3 track_source: Calling 'track_source AGES3193_p1_150 260.37 14.0240892332 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 19:07:37 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 19:07:37 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-24 19:07:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_150} INFO {Slewing to source 'AGES3193_p1_150' ...} 2008-Apr-24 19:07:37 INFO1 track_source: Starting to track AGES3193_p1_150 2008-Apr-24 19:07:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_150" 2008-Apr-24 19:07:37 LOG3 vw_send: To DATATAKING: set ra 260.37 2008-Apr-24 19:07:37 LOG3 vw_send: To DATATAKING: set dec 14.0240892332 2008-Apr-24 19:07:37 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 19:07:37 LOG3 vw_send: To DATATAKING: pnt tr 260.37 14.0240892332 -CF 2008-Apr-24 19:07:37 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:07:37 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 19:07:37 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-24 19:07:37 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 19:07:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:07:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 19:07:37 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-24 19:07:37 LOG1 fixed_driftmap: Parameters: HA = -00:58:57.7 Start = 08:54:31.2 LST = 08:53:57.2 diff = 34.0 secs 2008-Apr-24 19:07:37 INFO2 fixed_driftmap: Waiting 32 seconds for RA 9:53:29 2008-Apr-24 19:07:37 INFO2 lstwait: Waiting for 31.9 secs from LST 08:53:57 to LST 08:54:29 ... 2008-Apr-24 19:07:37 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.903930570289074 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 19:07:37 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-24 19:07:37 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-24 19:07:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_150" 2008-Apr-24 19:07:37 LOG4 got_cormsg: From DATATAKING: set ra 260.37 2008-Apr-24 19:07:37 LOG4 got_cormsg: From DATATAKING: set dec 14.0240892332 2008-Apr-24 19:07:37 LOG4 got_cormsg: From DATATAKING: vw% 260.37 2008-Apr-24 19:07:37 LOG4 got_cormsg: From DATATAKING: vw% 14.0240892332 2008-Apr-24 19:07:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:07:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 19:07:37 LOG4 got_cormsg: From DATATAKING: pnt tr 260.37 14.0240892332 -CF 2008-Apr-24 19:07:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:07:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 19:07:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:07:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.895 and 1.082 2008-Apr-24 19:08:09 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-24 19:08:09 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-24 19:08:09 LOG4 lstwait: Finished waiting, the gui caused difference: 0.095520440005714136 2008-Apr-24 19:08:09 INFO3 lstwait: Finished waiting 2008-Apr-24 19:08:09 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 19:08:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-24 19:08:09 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 19:08:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-24 19:08:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-24 19:08:09 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-24 19:08:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 19:08:09 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-24 19:08:09 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-24 19:08:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-24 19:08:09 INFO2 take_spectra: Starting WAPP scan: 811500187 2008-Apr-24 19:08:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-24 19:08:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 19:08:09 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-24 19:08:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 19:08:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83290.00 2008-Apr-24 19:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.116244 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 19:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 19:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.116244 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:08:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.707 < 0.8)! 2008-Apr-24 19:08:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 0.707 1.081 0.968 2008-Apr-24 19:08:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 0.897 0.937 1.012 2008-Apr-24 19:08:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.920 1.015 0.902 2008-Apr-24 19:08:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.967 1.081 1.071 2008-Apr-24 19:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.705 and 1.083 (still bad) 2008-Apr-24 19:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.706 and 1.084 (still bad) 2008-Apr-24 19:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.086 (still bad) 2008-Apr-24 19:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.088 (still bad) 2008-Apr-24 19:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.090 (still bad) 2008-Apr-24 19:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.088 (still bad) 2008-Apr-24 19:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.088 (still bad) 2008-Apr-24 19:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.087 (still bad) 2008-Apr-24 19:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.086 (still bad) 2008-Apr-24 19:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.083 (still bad) 2008-Apr-24 19:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.082 (still bad) 2008-Apr-24 19:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.081 (still bad) 2008-Apr-24 19:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.082 (still bad) 2008-Apr-24 19:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.081 (still bad) 2008-Apr-24 19:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.080 (still bad) 2008-Apr-24 19:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.080 (still bad) 2008-Apr-24 19:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.082 (still bad) 2008-Apr-24 19:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.082 (still bad) 2008-Apr-24 19:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.774 and 1.082 (still bad) 2008-Apr-24 19:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.767 and 1.082 (still bad) 2008-Apr-24 19:08:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.805 and 1.082 2008-Apr-24 19:09:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.632 < 0.8)! 2008-Apr-24 19:09:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 0.632 1.084 0.968 2008-Apr-24 19:09:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.895 0.939 1.015 2008-Apr-24 19:09:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.920 1.015 0.906 2008-Apr-24 19:09:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.966 1.081 1.069 2008-Apr-24 19:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.633 and 1.082 (still bad) 2008-Apr-24 19:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.628 and 1.081 (still bad) 2008-Apr-24 19:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.631 and 1.081 (still bad) 2008-Apr-24 19:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.631 and 1.082 (still bad) 2008-Apr-24 19:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.624 and 1.082 (still bad) 2008-Apr-24 19:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.626 and 1.082 (still bad) 2008-Apr-24 19:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.082 (still bad) 2008-Apr-24 19:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.084 (still bad) 2008-Apr-24 19:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.082 (still bad) 2008-Apr-24 19:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.082 (still bad) 2008-Apr-24 19:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.082 (still bad) 2008-Apr-24 19:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.082 (still bad) 2008-Apr-24 19:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.757 and 1.082 (still bad) 2008-Apr-24 19:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.082 (still bad) 2008-Apr-24 19:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.082 (still bad) 2008-Apr-24 19:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.081 (still bad) 2008-Apr-24 19:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.082 (still bad) 2008-Apr-24 19:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.083 (still bad) 2008-Apr-24 19:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.739 and 1.082 (still bad) 2008-Apr-24 19:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.083 (still bad) 2008-Apr-24 19:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.082 (still bad) 2008-Apr-24 19:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.082 (still bad) 2008-Apr-24 19:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.082 (still bad) 2008-Apr-24 19:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.081 (still bad) 2008-Apr-24 19:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.082 (still bad) 2008-Apr-24 19:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.082 (still bad) 2008-Apr-24 19:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.579 and 1.082 (still bad) 2008-Apr-24 19:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.577 and 1.083 (still bad) 2008-Apr-24 19:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.082 (still bad) 2008-Apr-24 19:10:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.666 < 0.8)! 2008-Apr-24 19:10:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 0.666 1.081 0.965 2008-Apr-24 19:10:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 0.896 0.938 1.015 2008-Apr-24 19:10:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.922 1.017 0.906 2008-Apr-24 19:10:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.968 1.083 1.071 2008-Apr-24 19:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.082 (still bad) 2008-Apr-24 19:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.081 (still bad) 2008-Apr-24 19:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.082 (still bad) 2008-Apr-24 19:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.082 (still bad) 2008-Apr-24 19:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.081 (still bad) 2008-Apr-24 19:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.081 (still bad) 2008-Apr-24 19:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 1.081 (still bad) 2008-Apr-24 19:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.080 (still bad) 2008-Apr-24 19:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.662 and 1.080 (still bad) 2008-Apr-24 19:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 1.083 (still bad) 2008-Apr-24 19:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.082 (still bad) 2008-Apr-24 19:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.082 (still bad) 2008-Apr-24 19:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.082 (still bad) 2008-Apr-24 19:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.082 (still bad) 2008-Apr-24 19:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.082 (still bad) 2008-Apr-24 19:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.710 and 1.082 (still bad) 2008-Apr-24 19:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.710 and 1.081 (still bad) 2008-Apr-24 19:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.083 (still bad) 2008-Apr-24 19:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.082 (still bad) 2008-Apr-24 19:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.082 (still bad) 2008-Apr-24 19:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.083 (still bad) 2008-Apr-24 19:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.082 (still bad) 2008-Apr-24 19:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.082 (still bad) 2008-Apr-24 19:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.082 (still bad) 2008-Apr-24 19:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.082 (still bad) 2008-Apr-24 19:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.083 (still bad) 2008-Apr-24 19:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.083 (still bad) 2008-Apr-24 19:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.083 (still bad) 2008-Apr-24 19:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.719 and 1.086 (still bad) 2008-Apr-24 19:11:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.721 < 0.8)! 2008-Apr-24 19:11:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 0.721 1.086 0.971 2008-Apr-24 19:11:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 0.896 0.939 1.015 2008-Apr-24 19:11:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.926 1.015 0.907 2008-Apr-24 19:11:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.967 1.080 1.069 2008-Apr-24 19:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.087 (still bad) 2008-Apr-24 19:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.089 (still bad) 2008-Apr-24 19:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.089 (still bad) 2008-Apr-24 19:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.089 (still bad) 2008-Apr-24 19:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.087 (still bad) 2008-Apr-24 19:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.774 and 1.086 (still bad) 2008-Apr-24 19:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.766 and 1.084 (still bad) 2008-Apr-24 19:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.083 (still bad) 2008-Apr-24 19:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.757 and 1.083 (still bad) 2008-Apr-24 19:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.758 and 1.083 (still bad) 2008-Apr-24 19:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.758 and 1.082 (still bad) 2008-Apr-24 19:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.753 and 1.084 (still bad) 2008-Apr-24 19:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.084 (still bad) 2008-Apr-24 19:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.758 and 1.084 (still bad) 2008-Apr-24 19:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.670 and 1.085 (still bad) 2008-Apr-24 19:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.084 (still bad) 2008-Apr-24 19:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.085 (still bad) 2008-Apr-24 19:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.085 (still bad) 2008-Apr-24 19:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.084 (still bad) 2008-Apr-24 19:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.084 (still bad) 2008-Apr-24 19:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.084 (still bad) 2008-Apr-24 19:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.084 (still bad) 2008-Apr-24 19:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.083 (still bad) 2008-Apr-24 19:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.083 (still bad) 2008-Apr-24 19:12:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.849 and 1.082 2008-Apr-24 19:12:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.767 < 0.8)! 2008-Apr-24 19:12:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 0.767 1.081 0.964 2008-Apr-24 19:12:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.902 0.939 1.015 2008-Apr-24 19:12:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.920 1.015 0.908 2008-Apr-24 19:12:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.966 1.083 1.070 2008-Apr-24 19:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.083 (still bad) 2008-Apr-24 19:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.082 (still bad) 2008-Apr-24 19:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.083 (still bad) 2008-Apr-24 19:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.082 (still bad) 2008-Apr-24 19:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.082 (still bad) 2008-Apr-24 19:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.082 (still bad) 2008-Apr-24 19:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.083 (still bad) 2008-Apr-24 19:12:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.871 and 1.083 2008-Apr-24 19:12:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.797 < 0.8)! 2008-Apr-24 19:12:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 0.797 1.082 0.966 2008-Apr-24 19:12:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 0.897 0.941 1.015 2008-Apr-24 19:12:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.921 1.019 0.910 2008-Apr-24 19:12:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.966 1.083 1.070 2008-Apr-24 19:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.082 (still bad) 2008-Apr-24 19:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.082 (still bad) 2008-Apr-24 19:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.083 (still bad) 2008-Apr-24 19:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.084 (still bad) 2008-Apr-24 19:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.781 and 1.085 (still bad) 2008-Apr-24 19:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.086 (still bad) 2008-Apr-24 19:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.089 (still bad) 2008-Apr-24 19:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.091 (still bad) 2008-Apr-24 19:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.090 (still bad) 2008-Apr-24 19:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.089 (still bad) 2008-Apr-24 19:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.090 (still bad) 2008-Apr-24 19:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.092 (still bad) 2008-Apr-24 19:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.092 (still bad) 2008-Apr-24 19:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.091 (still bad) 2008-Apr-24 19:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.091 (still bad) 2008-Apr-24 19:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.089 (still bad) 2008-Apr-24 19:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.697 and 1.088 (still bad) 2008-Apr-24 19:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.087 (still bad) 2008-Apr-24 19:13:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.829 and 1.094 2008-Apr-24 19:13:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-24 19:13:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 0.799 1.089 0.972 2008-Apr-24 19:13:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 0.897 0.941 1.016 2008-Apr-24 19:13:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.924 1.019 0.908 2008-Apr-24 19:13:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.967 1.085 1.072 2008-Apr-24 19:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.088 (still bad) 2008-Apr-24 19:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.777 and 1.086 (still bad) 2008-Apr-24 19:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.770 and 1.088 (still bad) 2008-Apr-24 19:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.086 (still bad) 2008-Apr-24 19:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.759 and 1.087 (still bad) 2008-Apr-24 19:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.752 and 1.086 (still bad) 2008-Apr-24 19:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.088 (still bad) 2008-Apr-24 19:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.741 and 1.087 (still bad) 2008-Apr-24 19:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.086 (still bad) 2008-Apr-24 19:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.088 (still bad) 2008-Apr-24 19:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.086 (still bad) 2008-Apr-24 19:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.086 (still bad) 2008-Apr-24 19:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.729 and 1.084 (still bad) 2008-Apr-24 19:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.084 (still bad) 2008-Apr-24 19:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.083 (still bad) 2008-Apr-24 19:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.084 (still bad) 2008-Apr-24 19:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.086 (still bad) 2008-Apr-24 19:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.084 (still bad) 2008-Apr-24 19:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.085 (still bad) 2008-Apr-24 19:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.741 and 1.085 (still bad) 2008-Apr-24 19:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.084 (still bad) 2008-Apr-24 19:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.084 (still bad) 2008-Apr-24 19:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.084 (still bad) 2008-Apr-24 19:14:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.804 and 1.084 2008-Apr-24 19:14:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-24 19:14:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.799 1.083 0.965 2008-Apr-24 19:14:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.899 0.940 1.016 2008-Apr-24 19:14:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.921 1.018 0.906 2008-Apr-24 19:14:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.967 1.084 1.071 2008-Apr-24 19:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.086 (still bad) 2008-Apr-24 19:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.085 (still bad) 2008-Apr-24 19:15:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.802 and 1.084 2008-Apr-24 19:15:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.799 < 0.8)! 2008-Apr-24 19:15:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.799 1.084 0.968 2008-Apr-24 19:15:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.904 0.942 1.016 2008-Apr-24 19:15:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.921 1.019 0.909 2008-Apr-24 19:15:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.968 1.083 1.072 2008-Apr-24 19:15:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.801 and 1.083 2008-Apr-24 19:15:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.797 < 0.8)! 2008-Apr-24 19:15:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 0.797 1.084 0.969 2008-Apr-24 19:15:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.904 0.942 1.017 2008-Apr-24 19:15:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.921 1.019 0.910 2008-Apr-24 19:15:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.966 1.082 1.070 2008-Apr-24 19:15:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.809 and 1.091 2008-Apr-24 19:15:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.792 < 0.8)! 2008-Apr-24 19:15:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.792 1.090 0.970 2008-Apr-24 19:15:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.904 0.942 1.016 2008-Apr-24 19:15:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.922 1.020 0.909 2008-Apr-24 19:15:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.966 1.083 1.071 2008-Apr-24 19:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.786 and 1.088 (still bad) 2008-Apr-24 19:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.779 and 1.086 (still bad) 2008-Apr-24 19:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.768 and 1.084 (still bad) 2008-Apr-24 19:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.763 and 1.083 (still bad) 2008-Apr-24 19:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.757 and 1.085 (still bad) 2008-Apr-24 19:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.759 and 1.086 (still bad) 2008-Apr-24 19:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.752 and 1.086 (still bad) 2008-Apr-24 19:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 1.093 (still bad) 2008-Apr-24 19:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.100 (still bad) 2008-Apr-24 19:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.106 (still bad) 2008-Apr-24 19:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.114 (still bad) 2008-Apr-24 19:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.121 (still bad) 2008-Apr-24 19:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.741 and 1.125 (still bad) 2008-Apr-24 19:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.124 (still bad) 2008-Apr-24 19:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.118 (still bad) 2008-Apr-24 19:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.113 (still bad) 2008-Apr-24 19:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.104 (still bad) 2008-Apr-24 19:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.097 (still bad) 2008-Apr-24 19:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.090 (still bad) 2008-Apr-24 19:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.085 (still bad) 2008-Apr-24 19:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.085 (still bad) 2008-Apr-24 19:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.087 (still bad) 2008-Apr-24 19:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.090 (still bad) 2008-Apr-24 19:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.092 (still bad) 2008-Apr-24 19:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.094 (still bad) 2008-Apr-24 19:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.095 (still bad) 2008-Apr-24 19:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.096 (still bad) 2008-Apr-24 19:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.095 (still bad) 2008-Apr-24 19:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.092 (still bad) 2008-Apr-24 19:16:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.731 < 0.8)! 2008-Apr-24 19:16:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.731 1.082 0.966 2008-Apr-24 19:16:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.994 0.895 0.941 1.016 2008-Apr-24 19:16:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.921 1.019 0.910 2008-Apr-24 19:16:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.974 1.090 1.078 2008-Apr-24 19:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.089 (still bad) 2008-Apr-24 19:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.088 (still bad) 2008-Apr-24 19:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.089 (still bad) 2008-Apr-24 19:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.753 and 1.088 (still bad) 2008-Apr-24 19:16:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.801 and 1.088 2008-Apr-24 19:16:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.796 < 0.8)! 2008-Apr-24 19:16:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.796 1.082 0.965 2008-Apr-24 19:16:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 0.896 0.948 1.021 2008-Apr-24 19:16:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.922 1.021 0.909 2008-Apr-24 19:16:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.967 1.085 1.072 2008-Apr-24 19:16:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.801 and 1.084 2008-Apr-24 19:16:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.794 < 0.8)! 2008-Apr-24 19:16:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.794 1.084 0.965 2008-Apr-24 19:16:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.994 0.896 0.948 1.021 2008-Apr-24 19:16:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.924 1.021 0.910 2008-Apr-24 19:16:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.967 1.084 1.071 2008-Apr-24 19:16:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.809 and 1.084 2008-Apr-24 19:22:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.563 < 0.8)! 2008-Apr-24 19:22:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.563 1.087 0.967 2008-Apr-24 19:22:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.897 0.946 1.019 2008-Apr-24 19:22:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.921 1.019 0.910 2008-Apr-24 19:22:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.966 1.081 1.070 2008-Apr-24 19:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.085 (still bad) 2008-Apr-24 19:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.574 and 1.085 (still bad) 2008-Apr-24 19:22:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.865 and 1.090 2008-Apr-24 19:22:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.749 < 0.8)! 2008-Apr-24 19:22:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 0.749 1.094 0.974 2008-Apr-24 19:22:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.994 0.897 0.946 1.022 2008-Apr-24 19:22:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.921 1.020 0.910 2008-Apr-24 19:22:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.967 1.082 1.072 2008-Apr-24 19:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.710 and 1.096 (still bad) 2008-Apr-24 19:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.095 (still bad) 2008-Apr-24 19:22:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.830 and 1.093 2008-Apr-24 19:23:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.611 < 0.8)! 2008-Apr-24 19:23:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 0.611 1.100 0.977 2008-Apr-24 19:23:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.901 0.944 1.018 2008-Apr-24 19:23:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.921 1.023 0.914 2008-Apr-24 19:23:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.967 1.082 1.072 2008-Apr-24 19:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 1.099 (still bad) 2008-Apr-24 19:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.700 and 1.099 (still bad) 2008-Apr-24 19:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.099 (still bad) 2008-Apr-24 19:23:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.098 2008-Apr-24 19:23:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.688 < 0.8)! 2008-Apr-24 19:23:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.688 1.100 0.979 2008-Apr-24 19:23:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.898 0.943 1.018 2008-Apr-24 19:23:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.922 1.023 0.912 2008-Apr-24 19:23:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.966 1.082 1.070 2008-Apr-24 19:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.654 and 1.100 (still bad) 2008-Apr-24 19:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.099 (still bad) 2008-Apr-24 19:23:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.827 and 1.104 2008-Apr-24 19:24:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.700 < 0.8)! 2008-Apr-24 19:24:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.700 1.094 0.975 2008-Apr-24 19:24:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 0.898 0.943 1.018 2008-Apr-24 19:24:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.924 1.024 0.912 2008-Apr-24 19:24:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.967 1.084 1.071 2008-Apr-24 19:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.600 and 1.093 (still bad) 2008-Apr-24 19:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.093 (still bad) 2008-Apr-24 19:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.653 and 1.093 (still bad) 2008-Apr-24 19:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.688 and 1.093 (still bad) 2008-Apr-24 19:24:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.843 and 1.092 2008-Apr-24 19:24:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.714 < 0.8)! 2008-Apr-24 19:24:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.714 1.091 0.974 2008-Apr-24 19:24:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.898 0.944 1.017 2008-Apr-24 19:24:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.926 1.023 0.913 2008-Apr-24 19:24:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.967 1.082 1.072 2008-Apr-24 19:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.089 (still bad) 2008-Apr-24 19:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.089 (still bad) 2008-Apr-24 19:24:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.828 and 1.089 2008-Apr-24 19:24:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.676 < 0.8)! 2008-Apr-24 19:24:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 0.676 1.088 0.972 2008-Apr-24 19:24:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 0.900 0.943 1.018 2008-Apr-24 19:24:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.923 1.022 0.911 2008-Apr-24 19:24:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.968 1.084 1.071 2008-Apr-24 19:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.087 (still bad) 2008-Apr-24 19:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.088 (still bad) 2008-Apr-24 19:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.087 (still bad) 2008-Apr-24 19:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.088 (still bad) 2008-Apr-24 19:24:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.834 and 1.087 2008-Apr-24 19:26:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.570 < 0.8)! 2008-Apr-24 19:26:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.570 1.086 0.969 2008-Apr-24 19:26:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.899 0.943 1.019 2008-Apr-24 19:26:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.928 1.031 0.918 2008-Apr-24 19:26:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.967 1.085 1.073 2008-Apr-24 19:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.086 (still bad) 2008-Apr-24 19:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.087 (still bad) 2008-Apr-24 19:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.086 (still bad) 2008-Apr-24 19:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.088 (still bad) 2008-Apr-24 19:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.597 and 1.087 (still bad) 2008-Apr-24 19:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.704 and 1.089 (still bad) 2008-Apr-24 19:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.089 (still bad) 2008-Apr-24 19:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.700 and 1.089 (still bad) 2008-Apr-24 19:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.088 (still bad) 2008-Apr-24 19:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.700 and 1.088 (still bad) 2008-Apr-24 19:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.088 (still bad) 2008-Apr-24 19:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.087 (still bad) 2008-Apr-24 19:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.700 and 1.086 (still bad) 2008-Apr-24 19:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.086 (still bad) 2008-Apr-24 19:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.085 (still bad) 2008-Apr-24 19:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.087 (still bad) 2008-Apr-24 19:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.700 and 1.086 (still bad) 2008-Apr-24 19:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.086 (still bad) 2008-Apr-24 19:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.086 (still bad) 2008-Apr-24 19:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.086 (still bad) 2008-Apr-24 19:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.086 (still bad) 2008-Apr-24 19:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.087 (still bad) 2008-Apr-24 19:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.086 (still bad) 2008-Apr-24 19:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.086 (still bad) 2008-Apr-24 19:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.085 (still bad) 2008-Apr-24 19:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.085 (still bad) 2008-Apr-24 19:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.704 and 1.086 (still bad) 2008-Apr-24 19:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.705 and 1.087 (still bad) 2008-Apr-24 19:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.086 (still bad) 2008-Apr-24 19:27:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.748 < 0.8)! 2008-Apr-24 19:27:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 0.748 1.087 0.970 2008-Apr-24 19:27:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.900 0.944 1.018 2008-Apr-24 19:27:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.927 1.024 0.914 2008-Apr-24 19:27:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.969 1.084 1.076 2008-Apr-24 19:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.088 (still bad) 2008-Apr-24 19:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.087 (still bad) 2008-Apr-24 19:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.089 (still bad) 2008-Apr-24 19:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.087 (still bad) 2008-Apr-24 19:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.088 (still bad) 2008-Apr-24 19:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.087 (still bad) 2008-Apr-24 19:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.087 (still bad) 2008-Apr-24 19:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.086 (still bad) 2008-Apr-24 19:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.739 and 1.086 (still bad) 2008-Apr-24 19:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.085 (still bad) 2008-Apr-24 19:27:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.848 and 1.086 2008-Apr-24 19:27:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.773 < 0.8)! 2008-Apr-24 19:27:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.773 1.092 0.970 2008-Apr-24 19:27:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.900 0.945 1.021 2008-Apr-24 19:27:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.924 1.028 0.914 2008-Apr-24 19:27:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.972 1.088 1.078 2008-Apr-24 19:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.089 (still bad) 2008-Apr-24 19:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.759 and 1.090 (still bad) 2008-Apr-24 19:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.088 (still bad) 2008-Apr-24 19:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.770 and 1.089 (still bad) 2008-Apr-24 19:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.758 and 1.087 (still bad) 2008-Apr-24 19:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.756 and 1.088 (still bad) 2008-Apr-24 19:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.752 and 1.088 (still bad) 2008-Apr-24 19:27:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.859 and 1.087 2008-Apr-24 19:28:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.599 < 0.8)! 2008-Apr-24 19:28:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.599 1.087 0.968 2008-Apr-24 19:28:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.899 0.946 1.019 2008-Apr-24 19:28:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.924 1.025 0.913 2008-Apr-24 19:28:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.968 1.084 1.073 2008-Apr-24 19:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.757 and 1.087 (still bad) 2008-Apr-24 19:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.089 (still bad) 2008-Apr-24 19:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.087 (still bad) 2008-Apr-24 19:28:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 19:28:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 19:28:10 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-24 19:28:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 19:28:10 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-24 19:28:10 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-24 19:28:10 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-24 19:28:10 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-24 19:28:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 19:28:10 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-24 19:28:10 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-24 19:28:10 COMMAND run_command_line: EXECUTING command 11: 'FIXEDDRIFT az=257.13 alfaangle=-59.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_152 ra=95300.00 dec=200630.00' 2008-Apr-24 19:28:10 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-24 19:28:11 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 19:28:11 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 257.13 -59.3 hcorcal 5 tracking no first 1 AGES3193_p1_152 95300.00 200630.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 19:28:11 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-24 19:28:11 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-24 19:28:11 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_150' 2008-Apr-24 19:28:11 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-24 19:28:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_152} 2008-Apr-24 19:28:11 INFO3 fixed_driftmap: Sending telescope to Az = 257.13 and ZA = 8.67 2008-Apr-24 19:28:11 LOG3 track_source: Calling 'track_source AGES3193_p1_152 257.13 8.6702231027 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 19:28:11 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 19:28:11 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-24 19:28:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_152} INFO {Slewing to source 'AGES3193_p1_152' ...} 2008-Apr-24 19:28:11 INFO1 track_source: Starting to track AGES3193_p1_152 2008-Apr-24 19:28:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_152" 2008-Apr-24 19:28:11 LOG3 vw_send: To DATATAKING: set ra 257.13 2008-Apr-24 19:28:11 LOG3 vw_send: To DATATAKING: set dec 8.6702231027 2008-Apr-24 19:28:11 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 19:28:11 LOG3 vw_send: To DATATAKING: pnt tr 257.13 8.6702231027 -CF 2008-Apr-24 19:28:11 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:28:11 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 19:28:11 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-24 19:28:11 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 19:28:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:28:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 19:28:11 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-24 19:28:11 START begin_task: Starting task 'rotate ALFA to -59.3 degrees' 2008-Apr-24 19:28:11 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-24 19:28:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -59.3 degrees ...} 2008-Apr-24 19:28:11 INFO2 rotate_alfa: ALFA commanded to -59.3 degrees 2008-Apr-24 19:28:11 LOG3 sock_errsend: To ALFAMOTOR: POSITION -59.3 REPLY 2008-Apr-24 19:28:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 19:28:11 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 19:28:11 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-24 19:28:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_152" 2008-Apr-24 19:28:11 LOG4 got_cormsg: From DATATAKING: set ra 257.13 2008-Apr-24 19:28:11 LOG4 got_cormsg: From DATATAKING: set dec 8.6702231027 2008-Apr-24 19:28:11 LOG4 got_cormsg: From DATATAKING: vw% 257.13 2008-Apr-24 19:28:11 LOG4 got_cormsg: From DATATAKING: vw% 8.6702231027 2008-Apr-24 19:28:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:28:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 19:28:11 LOG4 got_cormsg: From DATATAKING: pnt tr 257.13 8.6702231027 -CF 2008-Apr-24 19:28:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:28:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 19:28:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.753 and 1.087 (still bad) 2008-Apr-24 19:28:16 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 19:28:16 INFO3 alfa_motor: ALFA rotator in-position -59.30 degrees 2008-Apr-24 19:28:16 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 19:28:16 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-24 19:28:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 19:28:16 STOP finish_task: Finishing task 'rotate ALFA to -59.3 degrees' 2008-Apr-24 19:28:16 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-24 19:28:16 INFO2 finish_task: DONE finished configuration: rotating ALFA to -59.3 degrees 2008-Apr-24 19:28:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:28:16 STOP end_task: Finishing task 'rotate ALFA to -59.3 degrees' with status 'OK' 2008-Apr-24 19:28:16 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-24 19:28:16 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 19:28:16 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-24 19:28:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 19:28:16 LOG3 waittrk: Start waittrk 5 2008-Apr-24 19:28:16 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 19:28:16 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-24 19:28:21 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 19:28:21 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-24 19:28:21 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 19:28:21 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-24 19:30:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 19:30:30 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-24 19:30:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 19:30:30 INFO2 waittrk: Now tracking AGES3193_p1_152 2008-Apr-24 19:30:30 LOG4 waittrk: Current telescope position: Az = 256.60 ZA = 8.67 2008-Apr-24 19:30:30 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 19:30:30 LOG5 finish_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-24 19:30:30 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 19:30:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:30:30 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 19:30:30 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-24 19:30:30 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 19:30:30 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-24 19:30:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 19:30:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 19:30:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:30:30 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 19:30:30 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-24 19:30:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 19:30:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:30:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:30:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 19:30:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 19:30:31 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-24 19:30:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 19:30:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 19:30:31 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 19:30:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 19:30:31 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-24 19:30:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:30:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 19:30:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 19:30:32 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-24 19:30:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 19:30:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 19:30:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 19:30:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 19:30:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 19:30:32 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-24 19:30:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 19:30:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 19:30:32 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-24 19:30:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 19:30:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 19:30:32 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 19:30:32 LOG5 finish_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-24 19:30:32 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 19:30:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:30:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 19:30:32 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-24 19:30:32 LOG5 dopset_later: Calling 'dopset_later 31.484008265277552' 2008-Apr-24 19:30:32 INFO3 dopset_later: Setting Doppler correction for 19:31:03 (31.5 seconds from now) 2008-Apr-24 19:30:32 LOG5 antvel: Calling 'antvel 257.130000 8.670223 F 31.484008265277552' 2008-Apr-24 19:30:32 LOG2 antvel: Parameters to Doppler: Heliocentric 84663 2008 115 0.0 2008-Apr-24 19:30:32 INFO5 antvel: Computed antenna velocity: +27.65023 km/s 2008-Apr-24 19:30:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.650233985 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-24 19:30:32 INFO4 dopset_gen: New sky frequencies: 1381.116046 1381.116046 1381.116046 1381.116046 1381.116046 1381.116046 1381.116046 1381.116046 1381.116046 2008-Apr-24 19:30:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.116046 sky0=1381.116046 sky1=1381.116046 sky2=1381.116046 sky3=1381.116046 sky4=1381.116046 sky5=1381.116046 sky6=1381.116046 sky7=1381.116046 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 19:30:32 LOG2 dopset_gen: Result from 'sky2syn': 1631.116046 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 19:30:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631116046.0} 2008-Apr-24 19:30:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 19:30:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-24 19:30:32 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-24 19:30:32 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:32.6 Dec = +20:06:30.8 2008-Apr-24 19:30:32 LOG3 track_source: Calling 'track_source AGES3193_p1_152 095232.6 200630.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 19:30:32 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 19:30:32 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-24 19:30:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_152} INFO {Slewing to source 'AGES3193_p1_152' ...} 2008-Apr-24 19:30:32 INFO1 track_source: Starting to track AGES3193_p1_152 2008-Apr-24 19:30:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_152" 2008-Apr-24 19:30:32 LOG3 vw_send: To DATATAKING: set ra 095232.6 2008-Apr-24 19:30:32 LOG3 vw_send: To DATATAKING: set dec 200630.8 2008-Apr-24 19:30:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 19:30:32 LOG3 vw_send: To DATATAKING: pnt tr 095232.6 200630.8 -CJ 2008-Apr-24 19:30:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:30:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 19:30:32 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-24 19:30:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 19:30:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:30:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 19:30:32 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-24 19:30:32 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 19:30:32 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-24 19:30:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 19:30:33 LOG3 waittrk: Start waittrk 5 2008-Apr-24 19:30:33 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 19:30:33 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631116046.0} 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_152" 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: set ra 095232.6 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: set dec 200630.8 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: pnt tr 095232.6 200630.8 -CJ 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: 095232.6 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: vw% 200630.8 2008-Apr-24 19:30:33 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-24 19:30:38 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 19:30:38 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-24 19:30:38 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 19:30:38 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-24 19:30:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 19:30:40 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-24 19:30:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 19:30:40 INFO2 waittrk: Now tracking AGES3193_p1_152 2008-Apr-24 19:30:40 LOG4 waittrk: Current telescope position: Az = 256.59 ZA = 8.65 2008-Apr-24 19:30:40 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 19:30:40 LOG5 finish_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-24 19:30:40 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 19:30:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:30:40 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 19:30:40 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-24 19:30:40 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 19:30:40 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-24 19:30:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 19:30:40 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 19:30:40 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 19:30:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 19:30:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:30:40 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 19:30:40 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-24 19:30:40 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 19:30:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:30:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:30:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 19:30:40 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 19:30:40 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-24 19:30:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 19:30:40 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 19:30:40 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-24 19:30:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 19:30:40 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 19:30:40 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 19:30:40 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 19:30:40 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 19:30:40 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 19:30:40 LOG5 begin_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-24 19:30:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 19:30:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:30:41 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 7 6 dB 2008-Apr-24 19:30:41 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 6 5 dB 2008-Apr-24 19:30:41 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 4 3 dB 2008-Apr-24 19:30:41 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-24 19:30:41 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 19:30:41 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 19:30:41 LOG5 end_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-24 19:30:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.943 1.126 ALFA beam 1: 1.071 0.959 2008-Apr-24 19:30:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.971 1.077 ALFA beam 3: 0.914 0.989 2008-Apr-24 19:30:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.056 0.891 ALFA beam 5: 0.987 1.121 2008-Apr-24 19:30:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.957 0.938 ALFA beam 7: 1.051 1.039 2008-Apr-24 19:30:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 19:30:41 LOG5 finish_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-24 19:30:41 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 19:30:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:30:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 19:30:41 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-24 19:30:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 19:30:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 19:30:41 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-24 19:30:41 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 19:30:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:30:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 19:30:41 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-24 19:30:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 19:30:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 19:30:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 19:30:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 19:30:41 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-24 19:30:41 START begin_task: Starting task 'WAPP calibration' 2008-Apr-24 19:30:41 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-24 19:30:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-24 19:30:41 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-24 19:30:41 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 19:30:41 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-24 19:30:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 19:30:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 19:30:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:30:41 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 19:30:41 LOG5 begin_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-24 19:30:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 19:30:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 19:30:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:30:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:30:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 19:30:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 19:30:41 LOG5 end_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-24 19:30:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 19:30:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 19:30:41 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 19:30:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 19:30:41 LOG5 begin_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-24 19:30:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:30:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 19:30:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 19:30:42 LOG5 end_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-24 19:30:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 19:30:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 19:30:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 19:30:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 19:30:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 19:30:42 LOG5 begin_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-24 19:30:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0002.fits 2008-Apr-24 19:30:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 19:30:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 19:30:42 LOG5 end_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-24 19:30:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 19:30:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 19:30:42 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 19:30:42 LOG5 finish_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-24 19:30:42 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-24 19:30:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:30:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 19:30:42 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-24 19:30:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-24 19:30:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 19:30:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 19:30:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 19:30:42 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-24 19:30:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080424.a2048.0002.fits} 2008-Apr-24 19:30:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 19:30:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 19:30:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 19:30:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 19:30:42 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-24 19:30:42 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-24 19:30:42 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-24 19:30:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 19:30:42 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-24 19:30:42 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 19:30:42 LOG5 log_alfabeam: Parameters: 9.8757222222222243 20.108555555555554 9.285006 2008.3170786434964 -59.300091 2008-Apr-24 19:30:42 LOG4 log_alfabeam: ALFABEAM 0 9.875722222222224 20.108555555555554 2008-Apr-24 19:30:42 LOG4 log_alfabeam: ALFABEAM 1 9.876719559124059 20.018241453200421 2008-Apr-24 19:30:42 LOG4 log_alfabeam: ALFABEAM 2 9.882704600980583 20.077926449294797 2008-Apr-24 19:30:42 LOG4 log_alfabeam: ALFABEAM 3 9.881665476006921 20.169136061831747 2008-Apr-24 19:30:42 LOG4 log_alfabeam: ALFABEAM 4 9.874656320736594 20.198729342990116 2008-Apr-24 19:30:42 LOG4 log_alfabeam: ALFABEAM 5 9.868731748534785 20.138111885457633 2008-Apr-24 19:30:42 LOG4 log_alfabeam: ALFABEAM 6 9.869755755445142 20.048831082479779 2008-Apr-24 19:30:42 INFO2 take_spectra: Starting WAPP scan: 811500188 2008-Apr-24 19:30:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 19:30:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 19:30:42 LOG5 begin_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-24 19:30:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 19:30:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84643.00 2008-Apr-24 19:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.116046 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 19:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 19:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:30:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 19:30:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 19:30:48 LOG5 end_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-24 19:30:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 19:30:48 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-24 19:30:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 19:30:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 19:30:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 19:30:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 19:30:48 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-24 19:30:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.538 > 1.4)! 2008-Apr-24 19:30:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.301 0.998 1.465 1.325 2008-Apr-24 19:30:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.318 1.538 1.270 1.360 2008-Apr-24 19:30:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.486 1.242 1.362 1.495 2008-Apr-24 19:30:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.335 1.313 1.465 1.454 2008-Apr-24 19:30:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 19:30:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 19:30:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 19:30:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 19:30:49 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-24 19:30:49 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-24 19:30:49 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-24 19:30:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 19:30:49 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-24 19:30:49 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 19:30:49 LOG5 log_alfabeam: Parameters: 9.8757222222222243 20.108555555555554 9.286955 2008.3170788653129 -59.300091 2008-Apr-24 19:30:49 LOG4 log_alfabeam: ALFABEAM 0 9.875722222222223 20.108555555555554 2008-Apr-24 19:30:49 LOG4 log_alfabeam: ALFABEAM 1 9.876724071600760 20.018251393269484 2008-Apr-24 19:30:49 LOG4 log_alfabeam: ALFABEAM 2 9.882706158978360 20.077995755402668 2008-Apr-24 19:30:49 LOG4 log_alfabeam: ALFABEAM 3 9.881662328770995 20.169197834292593 2008-Apr-24 19:30:49 LOG4 log_alfabeam: ALFABEAM 4 9.874651595590203 20.198718261746510 2008-Apr-24 19:30:49 LOG4 log_alfabeam: ALFABEAM 5 9.868730230962131 20.138039276844779 2008-Apr-24 19:30:49 LOG4 log_alfabeam: ALFABEAM 6 9.869758770120155 20.048771943470076 2008-Apr-24 19:30:49 INFO2 take_spectra: Starting WAPP scan: 811500189 2008-Apr-24 19:30:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 19:30:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 19:30:49 LOG5 begin_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-24 19:30:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 19:30:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84650.00 2008-Apr-24 19:30:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.116046 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 19:30:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:30:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:30:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 19:30:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:30:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:30:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:30:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:30:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:30:55 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-24 19:30:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 19:30:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 19:30:55 LOG5 end_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-24 19:30:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 19:30:55 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-24 19:30:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 19:30:55 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-24 19:30:55 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-24 19:30:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-24 19:30:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:30:55 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-24 19:30:55 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-24 19:30:55 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-24 19:30:56 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 257.13 and ZA = 8.67 2008-Apr-24 19:30:56 LOG3 track_source: Calling 'track_source AGES3193_p1_152 257.13 8.6702231027 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 19:30:56 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 19:30:56 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-24 19:30:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_152} INFO {Slewing to source 'AGES3193_p1_152' ...} 2008-Apr-24 19:30:56 INFO1 track_source: Starting to track AGES3193_p1_152 2008-Apr-24 19:30:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_152" 2008-Apr-24 19:30:56 LOG3 vw_send: To DATATAKING: set ra 257.13 2008-Apr-24 19:30:56 LOG3 vw_send: To DATATAKING: set dec 8.6702231027 2008-Apr-24 19:30:56 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 19:30:56 LOG3 vw_send: To DATATAKING: pnt tr 257.13 8.6702231027 -CF 2008-Apr-24 19:30:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:30:56 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 19:30:56 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-24 19:30:56 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 19:30:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:30:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 19:30:56 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-24 19:30:56 LOG1 fixed_driftmap: Parameters: HA = -00:36:00.4 Start = 09:17:28.6 LST = 09:17:20.1 diff = 8.5 secs 2008-Apr-24 19:30:56 INFO2 fixed_driftmap: Waiting 6.5 seconds for RA 9:53:29 2008-Apr-24 19:30:56 INFO2 lstwait: Waiting for 6.5 secs from LST 09:17:20 to LST 09:17:27 ... 2008-Apr-24 19:30:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 6.4908364579167603 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 19:30:56 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-24 19:30:56 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-24 19:30:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_152" 2008-Apr-24 19:30:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.122 2008-Apr-24 19:30:56 LOG4 got_cormsg: From DATATAKING: set ra 257.13 2008-Apr-24 19:30:56 LOG4 got_cormsg: From DATATAKING: set dec 8.6702231027 2008-Apr-24 19:30:56 LOG4 got_cormsg: From DATATAKING: vw% 257.13 2008-Apr-24 19:30:56 LOG4 got_cormsg: From DATATAKING: vw% 8.6702231027 2008-Apr-24 19:30:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:30:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 19:30:56 LOG4 got_cormsg: From DATATAKING: pnt tr 257.13 8.6702231027 -CF 2008-Apr-24 19:30:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:30:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 19:30:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:31:02 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-24 19:31:02 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-24 19:31:02 LOG4 lstwait: Finished waiting, the gui caused difference: 0.51139244000424355 2008-Apr-24 19:31:02 INFO3 lstwait: Finished waiting 2008-Apr-24 19:31:02 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 19:31:02 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-24 19:31:02 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 19:31:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-24 19:31:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-24 19:31:02 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-24 19:31:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 19:31:02 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-24 19:31:03 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-24 19:31:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-24 19:31:03 INFO2 take_spectra: Starting WAPP scan: 811500190 2008-Apr-24 19:31:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-24 19:31:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 19:31:03 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-24 19:31:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 19:31:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84664.00 2008-Apr-24 19:31:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.116046 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 19:31:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:31:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:31:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 19:31:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:31:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:31:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:31:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:31:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.116046 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:31:05 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Apr-24 19:31:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.793 < 0.8)! 2008-Apr-24 19:31:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 0.793 1.072 0.961 2008-Apr-24 19:31:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.106 0.914 0.989 2008-Apr-24 19:31:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 0.891 0.987 1.122 2008-Apr-24 19:31:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.939 1.051 1.040 2008-Apr-24 19:31:07 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Apr-24 19:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.785 and 1.122 (still bad) 2008-Apr-24 19:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.778 and 1.123 (still bad) 2008-Apr-24 19:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.773 and 1.123 (still bad) 2008-Apr-24 19:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.125 (still bad) 2008-Apr-24 19:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.764 and 1.125 (still bad) 2008-Apr-24 19:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.125 (still bad) 2008-Apr-24 19:31:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.125 2008-Apr-24 19:31:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.785 < 0.8)! 2008-Apr-24 19:31:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.785 1.083 0.969 2008-Apr-24 19:31:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.103 0.915 0.991 2008-Apr-24 19:31:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 0.891 0.988 1.124 2008-Apr-24 19:31:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.940 1.054 1.042 2008-Apr-24 19:31:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.850 and 1.122 2008-Apr-24 19:31:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.579 < 0.8)! 2008-Apr-24 19:31:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.579 1.077 0.969 2008-Apr-24 19:31:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.103 0.916 0.991 2008-Apr-24 19:31:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 0.892 0.990 1.125 2008-Apr-24 19:31:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.939 1.053 1.042 2008-Apr-24 19:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.624 and 1.126 (still bad) 2008-Apr-24 19:31:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.839 and 1.124 2008-Apr-24 19:32:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.778 < 0.8)! 2008-Apr-24 19:32:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.778 1.076 0.964 2008-Apr-24 19:32:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.101 0.914 0.991 2008-Apr-24 19:32:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 0.892 0.987 1.123 2008-Apr-24 19:32:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.940 1.054 1.042 2008-Apr-24 19:32:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.122 2008-Apr-24 19:38:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.562 < 0.8)! 2008-Apr-24 19:38:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.562 1.062 0.946 2008-Apr-24 19:38:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 1.129 0.917 0.993 2008-Apr-24 19:38:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.060 0.894 0.991 1.124 2008-Apr-24 19:38:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.963 0.944 1.057 1.045 2008-Apr-24 19:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.126 (still bad) 2008-Apr-24 19:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.127 (still bad) 2008-Apr-24 19:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.126 (still bad) 2008-Apr-24 19:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.784 and 1.126 (still bad) 2008-Apr-24 19:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.126 (still bad) 2008-Apr-24 19:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.719 and 1.125 (still bad) 2008-Apr-24 19:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.716 and 1.126 (still bad) 2008-Apr-24 19:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.716 and 1.124 (still bad) 2008-Apr-24 19:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.124 (still bad) 2008-Apr-24 19:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.125 (still bad) 2008-Apr-24 19:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.126 (still bad) 2008-Apr-24 19:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.717 and 1.126 (still bad) 2008-Apr-24 19:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.124 (still bad) 2008-Apr-24 19:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.590 and 1.125 (still bad) 2008-Apr-24 19:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.124 (still bad) 2008-Apr-24 19:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.125 (still bad) 2008-Apr-24 19:38:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.127 2008-Apr-24 19:39:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.607 < 0.8)! 2008-Apr-24 19:39:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.607 1.069 0.954 2008-Apr-24 19:39:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.104 0.919 0.993 2008-Apr-24 19:39:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.895 0.993 1.127 2008-Apr-24 19:39:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.975 1.094 1.081 2008-Apr-24 19:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.608 and 1.128 (still bad) 2008-Apr-24 19:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.128 (still bad) 2008-Apr-24 19:39:12 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.866 and 1.128 2008-Apr-24 19:40:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.731 < 0.8)! 2008-Apr-24 19:40:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.731 1.071 0.959 2008-Apr-24 19:40:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.106 0.918 0.993 2008-Apr-24 19:40:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.896 0.993 1.128 2008-Apr-24 19:40:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.965 0.946 1.058 1.048 2008-Apr-24 19:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.591 and 1.128 (still bad) 2008-Apr-24 19:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.591 and 1.127 (still bad) 2008-Apr-24 19:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.690 and 1.128 (still bad) 2008-Apr-24 19:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 1.126 (still bad) 2008-Apr-24 19:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.690 and 1.127 (still bad) 2008-Apr-24 19:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.127 (still bad) 2008-Apr-24 19:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.126 (still bad) 2008-Apr-24 19:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.127 (still bad) 2008-Apr-24 19:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.126 (still bad) 2008-Apr-24 19:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.128 (still bad) 2008-Apr-24 19:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.128 (still bad) 2008-Apr-24 19:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.129 (still bad) 2008-Apr-24 19:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.129 (still bad) 2008-Apr-24 19:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.130 (still bad) 2008-Apr-24 19:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.648 and 1.129 (still bad) 2008-Apr-24 19:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.634 and 1.128 (still bad) 2008-Apr-24 19:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.659 and 1.129 (still bad) 2008-Apr-24 19:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.693 and 1.128 (still bad) 2008-Apr-24 19:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.799 and 1.128 (still bad) 2008-Apr-24 19:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.769 and 1.127 (still bad) 2008-Apr-24 19:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.756 and 1.127 (still bad) 2008-Apr-24 19:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.127 (still bad) 2008-Apr-24 19:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.127 (still bad) 2008-Apr-24 19:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.581 and 1.126 (still bad) 2008-Apr-24 19:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.576 and 1.127 (still bad) 2008-Apr-24 19:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.576 and 1.128 (still bad) 2008-Apr-24 19:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.575 and 1.128 (still bad) 2008-Apr-24 19:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.774 and 1.128 (still bad) 2008-Apr-24 19:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.127 (still bad) 2008-Apr-24 19:41:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.779 < 0.8)! 2008-Apr-24 19:41:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.779 1.066 0.954 2008-Apr-24 19:41:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.104 0.917 0.994 2008-Apr-24 19:41:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.899 0.995 1.128 2008-Apr-24 19:41:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.948 1.060 1.049 2008-Apr-24 19:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.776 and 1.127 (still bad) 2008-Apr-24 19:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.770 and 1.128 (still bad) 2008-Apr-24 19:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.767 and 1.128 (still bad) 2008-Apr-24 19:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.772 and 1.127 (still bad) 2008-Apr-24 19:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.773 and 1.127 (still bad) 2008-Apr-24 19:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.751 and 1.128 (still bad) 2008-Apr-24 19:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.759 and 1.128 (still bad) 2008-Apr-24 19:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.761 and 1.130 (still bad) 2008-Apr-24 19:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.755 and 1.129 (still bad) 2008-Apr-24 19:41:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.129 2008-Apr-24 19:42:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.695 < 0.8)! 2008-Apr-24 19:42:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.695 1.065 0.956 2008-Apr-24 19:42:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.105 0.918 0.993 2008-Apr-24 19:42:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.898 0.993 1.128 2008-Apr-24 19:42:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.946 1.061 1.049 2008-Apr-24 19:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.128 (still bad) 2008-Apr-24 19:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.652 and 1.129 (still bad) 2008-Apr-24 19:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.127 (still bad) 2008-Apr-24 19:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.659 and 1.127 (still bad) 2008-Apr-24 19:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.655 and 1.126 (still bad) 2008-Apr-24 19:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.128 (still bad) 2008-Apr-24 19:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.646 and 1.127 (still bad) 2008-Apr-24 19:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.783 and 1.126 (still bad) 2008-Apr-24 19:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.774 and 1.126 (still bad) 2008-Apr-24 19:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.768 and 1.126 (still bad) 2008-Apr-24 19:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.125 (still bad) 2008-Apr-24 19:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.765 and 1.125 (still bad) 2008-Apr-24 19:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.762 and 1.126 (still bad) 2008-Apr-24 19:42:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.127 2008-Apr-24 19:42:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.727 < 0.8)! 2008-Apr-24 19:42:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.727 1.066 0.956 2008-Apr-24 19:42:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 1.103 0.919 0.993 2008-Apr-24 19:42:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.064 0.897 0.994 1.127 2008-Apr-24 19:42:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.947 1.061 1.050 2008-Apr-24 19:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.598 and 1.127 (still bad) 2008-Apr-24 19:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.596 and 1.126 (still bad) 2008-Apr-24 19:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.595 and 1.125 (still bad) 2008-Apr-24 19:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.595 and 1.124 (still bad) 2008-Apr-24 19:42:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.802 and 1.126 2008-Apr-24 19:42:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.796 < 0.8)! 2008-Apr-24 19:42:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.796 1.061 0.954 2008-Apr-24 19:42:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 1.104 0.917 0.994 2008-Apr-24 19:42:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.897 0.993 1.126 2008-Apr-24 19:42:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.965 0.944 1.059 1.047 2008-Apr-24 19:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.124 (still bad) 2008-Apr-24 19:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.127 (still bad) 2008-Apr-24 19:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.126 (still bad) 2008-Apr-24 19:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.126 (still bad) 2008-Apr-24 19:42:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.847 and 1.126 2008-Apr-24 19:43:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.589 < 0.8)! 2008-Apr-24 19:43:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.589 1.070 0.959 2008-Apr-24 19:43:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.103 0.916 0.994 2008-Apr-24 19:43:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.898 0.994 1.128 2008-Apr-24 19:43:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.966 0.946 1.059 1.048 2008-Apr-24 19:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.587 and 1.125 (still bad) 2008-Apr-24 19:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.586 and 1.127 (still bad) 2008-Apr-24 19:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.588 and 1.127 (still bad) 2008-Apr-24 19:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.587 and 1.127 (still bad) 2008-Apr-24 19:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.627 and 1.127 (still bad) 2008-Apr-24 19:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.127 (still bad) 2008-Apr-24 19:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.127 (still bad) 2008-Apr-24 19:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.127 (still bad) 2008-Apr-24 19:43:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.819 and 1.128 2008-Apr-24 19:43:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.615 < 0.8)! 2008-Apr-24 19:43:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.615 1.067 0.956 2008-Apr-24 19:43:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.103 0.918 0.996 2008-Apr-24 19:43:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.898 0.993 1.128 2008-Apr-24 19:43:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.966 0.947 1.059 1.049 2008-Apr-24 19:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.747 and 1.128 (still bad) 2008-Apr-24 19:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.780 and 1.130 (still bad) 2008-Apr-24 19:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.127 (still bad) 2008-Apr-24 19:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.128 (still bad) 2008-Apr-24 19:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.128 (still bad) 2008-Apr-24 19:44:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.834 and 1.128 2008-Apr-24 19:46:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.526 < 0.8)! 2008-Apr-24 19:46:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.526 1.072 0.956 2008-Apr-24 19:46:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.103 0.916 0.994 2008-Apr-24 19:46:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 0.895 0.994 1.123 2008-Apr-24 19:46:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.964 0.947 1.057 1.048 2008-Apr-24 19:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.123 (still bad) 2008-Apr-24 19:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.606 and 1.123 (still bad) 2008-Apr-24 19:46:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.894 and 1.123 2008-Apr-24 19:46:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.622 < 0.8)! 2008-Apr-24 19:46:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.622 1.071 0.959 2008-Apr-24 19:46:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.103 0.916 0.993 2008-Apr-24 19:46:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.059 0.895 0.994 1.122 2008-Apr-24 19:46:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.951 1.062 1.051 2008-Apr-24 19:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.121 (still bad) 2008-Apr-24 19:46:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.819 and 1.120 2008-Apr-24 19:46:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.579 < 0.8)! 2008-Apr-24 19:46:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.579 1.075 0.960 2008-Apr-24 19:46:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.103 0.916 0.994 2008-Apr-24 19:46:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.060 0.895 0.993 1.121 2008-Apr-24 19:46:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.951 1.061 1.051 2008-Apr-24 19:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.589 and 1.122 (still bad) 2008-Apr-24 19:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.585 and 1.122 (still bad) 2008-Apr-24 19:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.754 and 1.122 (still bad) 2008-Apr-24 19:46:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.121 2008-Apr-24 19:47:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.654 < 0.8)! 2008-Apr-24 19:47:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.654 1.078 0.965 2008-Apr-24 19:47:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 1.102 0.917 0.993 2008-Apr-24 19:47:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 0.895 0.993 1.122 2008-Apr-24 19:47:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.963 0.949 1.057 1.049 2008-Apr-24 19:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.610 and 1.120 (still bad) 2008-Apr-24 19:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.609 and 1.120 (still bad) 2008-Apr-24 19:47:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.894 and 1.120 2008-Apr-24 19:47:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.560 < 0.8)! 2008-Apr-24 19:47:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.560 1.066 0.957 2008-Apr-24 19:47:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.103 0.919 0.995 2008-Apr-24 19:47:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 0.894 0.994 1.123 2008-Apr-24 19:47:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.965 0.948 1.057 1.049 2008-Apr-24 19:47:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.122 2008-Apr-24 19:47:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.572 < 0.8)! 2008-Apr-24 19:47:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.572 1.067 0.955 2008-Apr-24 19:47:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.103 0.916 0.994 2008-Apr-24 19:47:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.896 0.992 1.122 2008-Apr-24 19:47:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.966 0.948 1.055 1.048 2008-Apr-24 19:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.574 and 1.124 (still bad) 2008-Apr-24 19:47:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.122 2008-Apr-24 19:48:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.554 < 0.8)! 2008-Apr-24 19:48:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.554 1.065 0.956 2008-Apr-24 19:48:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.105 0.923 1.000 2008-Apr-24 19:48:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 0.903 0.992 1.125 2008-Apr-24 19:48:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.965 0.950 1.057 1.049 2008-Apr-24 19:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.126 (still bad) 2008-Apr-24 19:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.124 (still bad) 2008-Apr-24 19:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.125 (still bad) 2008-Apr-24 19:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.125 (still bad) 2008-Apr-24 19:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.125 (still bad) 2008-Apr-24 19:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.125 (still bad) 2008-Apr-24 19:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.124 (still bad) 2008-Apr-24 19:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.128 (still bad) 2008-Apr-24 19:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.128 (still bad) 2008-Apr-24 19:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.129 (still bad) 2008-Apr-24 19:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.131 (still bad) 2008-Apr-24 19:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.133 (still bad) 2008-Apr-24 19:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.132 (still bad) 2008-Apr-24 19:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.133 (still bad) 2008-Apr-24 19:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.132 (still bad) 2008-Apr-24 19:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.130 (still bad) 2008-Apr-24 19:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.130 (still bad) 2008-Apr-24 19:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.128 (still bad) 2008-Apr-24 19:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.571 and 1.128 (still bad) 2008-Apr-24 19:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.129 (still bad) 2008-Apr-24 19:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.571 and 1.131 (still bad) 2008-Apr-24 19:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.573 and 1.132 (still bad) 2008-Apr-24 19:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.573 and 1.134 (still bad) 2008-Apr-24 19:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.135 (still bad) 2008-Apr-24 19:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.134 (still bad) 2008-Apr-24 19:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.574 and 1.134 (still bad) 2008-Apr-24 19:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.576 and 1.133 (still bad) 2008-Apr-24 19:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.574 and 1.132 (still bad) 2008-Apr-24 19:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.129 (still bad) 2008-Apr-24 19:49:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.571 < 0.8)! 2008-Apr-24 19:49:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.571 1.066 0.955 2008-Apr-24 19:49:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 1.102 0.918 0.996 2008-Apr-24 19:49:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.897 0.996 1.129 2008-Apr-24 19:49:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.949 1.058 1.049 2008-Apr-24 19:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.575 and 1.128 (still bad) 2008-Apr-24 19:49:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.129 2008-Apr-24 19:50:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.776 < 0.8)! 2008-Apr-24 19:50:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 0.776 1.067 0.955 2008-Apr-24 19:50:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.105 0.918 0.995 2008-Apr-24 19:50:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.065 0.900 0.991 1.126 2008-Apr-24 19:50:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.950 1.058 1.050 2008-Apr-24 19:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.768 and 1.127 (still bad) 2008-Apr-24 19:50:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.830 and 1.128 2008-Apr-24 19:50:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.798 < 0.8)! 2008-Apr-24 19:50:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.798 1.065 0.955 2008-Apr-24 19:50:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.103 0.917 0.995 2008-Apr-24 19:50:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.899 0.993 1.126 2008-Apr-24 19:50:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.950 1.058 1.052 2008-Apr-24 19:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.794 and 1.127 (still bad) 2008-Apr-24 19:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.128 (still bad) 2008-Apr-24 19:50:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.819 and 1.127 2008-Apr-24 19:50:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.784 < 0.8)! 2008-Apr-24 19:50:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 0.784 1.069 0.956 2008-Apr-24 19:50:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.105 0.919 0.995 2008-Apr-24 19:50:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.898 0.994 1.128 2008-Apr-24 19:50:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.951 1.058 1.052 2008-Apr-24 19:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.787 and 1.128 (still bad) 2008-Apr-24 19:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.777 and 1.128 (still bad) 2008-Apr-24 19:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.774 and 1.129 (still bad) 2008-Apr-24 19:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.775 and 1.129 (still bad) 2008-Apr-24 19:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.778 and 1.128 (still bad) 2008-Apr-24 19:50:49 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.128 2008-Apr-24 19:51:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 19:51:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 19:51:04 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-24 19:51:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 19:51:04 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-24 19:51:04 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-24 19:51:04 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-24 19:51:04 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-24 19:51:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 19:51:04 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-24 19:51:04 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-24 19:51:04 COMMAND run_command_line: EXECUTING command 15: 'FIXEDDRIFT az=240.99 alfaangle=-39.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_154 ra=95300.00 dec=200330.00' 2008-Apr-24 19:51:04 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-24 19:51:05 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 19:51:05 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 240.99 -39.1 hcorcal 5 tracking no first 1 AGES3193_p1_154 95300.00 200330.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 19:51:05 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-24 19:51:05 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-24 19:51:05 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_152' 2008-Apr-24 19:51:05 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-24 19:51:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_154} 2008-Apr-24 19:51:05 INFO3 fixed_driftmap: Sending telescope to Az = 240.99 and ZA = 3.49 2008-Apr-24 19:51:05 LOG3 track_source: Calling 'track_source AGES3193_p1_154 240.99 3.4919536038 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 19:51:05 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 19:51:05 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-24 19:51:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_154} INFO {Slewing to source 'AGES3193_p1_154' ...} 2008-Apr-24 19:51:05 INFO1 track_source: Starting to track AGES3193_p1_154 2008-Apr-24 19:51:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_154" 2008-Apr-24 19:51:05 LOG3 vw_send: To DATATAKING: set ra 240.99 2008-Apr-24 19:51:05 LOG3 vw_send: To DATATAKING: set dec 3.4919536038 2008-Apr-24 19:51:05 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 19:51:05 LOG3 vw_send: To DATATAKING: pnt tr 240.99 3.4919536038 -CF 2008-Apr-24 19:51:05 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:51:05 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 19:51:05 LOG5 finish_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-24 19:51:05 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 19:51:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:51:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 19:51:05 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-24 19:51:05 START begin_task: Starting task 'rotate ALFA to -39.1 degrees' 2008-Apr-24 19:51:05 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-24 19:51:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -39.1 degrees ...} 2008-Apr-24 19:51:05 INFO2 rotate_alfa: ALFA commanded to -39.1 degrees 2008-Apr-24 19:51:05 LOG3 sock_errsend: To ALFAMOTOR: POSITION -39.1 REPLY 2008-Apr-24 19:51:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 19:51:05 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 19:51:05 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-24 19:51:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_154" 2008-Apr-24 19:51:05 LOG4 got_cormsg: From DATATAKING: set ra 240.99 2008-Apr-24 19:51:05 LOG4 got_cormsg: From DATATAKING: set dec 3.4919536038 2008-Apr-24 19:51:05 LOG4 got_cormsg: From DATATAKING: vw% 240.99 2008-Apr-24 19:51:05 LOG4 got_cormsg: From DATATAKING: vw% 3.4919536038 2008-Apr-24 19:51:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:51:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 19:51:05 LOG4 got_cormsg: From DATATAKING: pnt tr 240.99 3.4919536038 -CF 2008-Apr-24 19:51:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:51:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 19:51:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:51:18 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 19:51:18 INFO3 alfa_motor: ALFA rotator in-position -39.10 degrees 2008-Apr-24 19:51:18 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 19:51:18 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-24 19:51:18 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 19:51:18 STOP finish_task: Finishing task 'rotate ALFA to -39.1 degrees' 2008-Apr-24 19:51:18 LOG5 finish_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-24 19:51:18 INFO2 finish_task: DONE finished configuration: rotating ALFA to -39.1 degrees 2008-Apr-24 19:51:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:51:18 STOP end_task: Finishing task 'rotate ALFA to -39.1 degrees' with status 'OK' 2008-Apr-24 19:51:18 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-24 19:51:18 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 19:51:18 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-24 19:51:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 19:51:18 LOG3 waittrk: Start waittrk 5 2008-Apr-24 19:51:18 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 19:51:18 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-24 19:51:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 19:51:23 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-24 19:51:23 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 19:51:23 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-24 19:53:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 19:53:19 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-24 19:53:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 19:53:19 INFO2 waittrk: Now tracking AGES3193_p1_154 2008-Apr-24 19:53:19 LOG4 waittrk: Current telescope position: Az = 240.05 ZA = 3.49 2008-Apr-24 19:53:19 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 19:53:19 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-24 19:53:19 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 19:53:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:53:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 19:53:19 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-24 19:53:19 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 19:53:19 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-24 19:53:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 19:53:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 19:53:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:53:19 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 19:53:19 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-24 19:53:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 19:53:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:53:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:53:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 19:53:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 19:53:20 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-24 19:53:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 19:53:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 19:53:20 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 19:53:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 19:53:20 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-24 19:53:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:53:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 19:53:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 19:53:20 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-24 19:53:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 19:53:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 19:53:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 19:53:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 19:53:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 19:53:20 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-24 19:53:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 19:53:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 19:53:20 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-24 19:53:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 19:53:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 19:53:20 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 19:53:20 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-24 19:53:20 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 19:53:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:53:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 19:53:21 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-24 19:53:21 LOG5 dopset_later: Calling 'dopset_later 40.083387994249051' 2008-Apr-24 19:53:21 INFO3 dopset_later: Setting Doppler correction for 19:54:00 (40.1 seconds from now) 2008-Apr-24 19:53:21 LOG5 antvel: Calling 'antvel 240.990000 3.491954 F 40.083387994249051' 2008-Apr-24 19:53:21 LOG2 antvel: Parameters to Doppler: Heliocentric 86040 2008 115 0.0 2008-Apr-24 19:53:21 INFO5 antvel: Computed antenna velocity: +27.69399 km/s 2008-Apr-24 19:53:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.6939946609 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-24 19:53:21 INFO4 dopset_gen: New sky frequencies: 1381.115845 1381.115845 1381.115845 1381.115845 1381.115845 1381.115845 1381.115845 1381.115845 1381.115845 2008-Apr-24 19:53:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.115845 sky0=1381.115845 sky1=1381.115845 sky2=1381.115845 sky3=1381.115845 sky4=1381.115845 sky5=1381.115845 sky6=1381.115845 sky7=1381.115845 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 19:53:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.115845 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 19:53:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631115845.0} 2008-Apr-24 19:53:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 19:53:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-24 19:53:21 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-24 19:53:21 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:24.0 Dec = +20:03:30.7 2008-Apr-24 19:53:21 LOG3 track_source: Calling 'track_source AGES3193_p1_154 095224.0 200330.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 19:53:21 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 19:53:21 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-24 19:53:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_154} INFO {Slewing to source 'AGES3193_p1_154' ...} 2008-Apr-24 19:53:21 INFO1 track_source: Starting to track AGES3193_p1_154 2008-Apr-24 19:53:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_154" 2008-Apr-24 19:53:21 LOG3 vw_send: To DATATAKING: set ra 095224.0 2008-Apr-24 19:53:21 LOG3 vw_send: To DATATAKING: set dec 200330.7 2008-Apr-24 19:53:21 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 19:53:21 LOG3 vw_send: To DATATAKING: pnt tr 095224.0 200330.7 -CJ 2008-Apr-24 19:53:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:53:21 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 19:53:21 LOG5 finish_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-24 19:53:21 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 19:53:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:53:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 19:53:21 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-24 19:53:21 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 19:53:21 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-24 19:53:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 19:53:21 LOG3 waittrk: Start waittrk 5 2008-Apr-24 19:53:21 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 19:53:21 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631115845.0} 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_154" 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: set ra 095224.0 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: set dec 200330.7 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: vw% 095224.0 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: vw% 200330.7 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: pnt tr 095224.0 200330.7 -CJ 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 19:53:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:53:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 19:53:26 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-24 19:53:26 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 19:53:26 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-24 19:53:28 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 19:53:28 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-24 19:53:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 19:53:28 INFO2 waittrk: Now tracking AGES3193_p1_154 2008-Apr-24 19:53:28 LOG4 waittrk: Current telescope position: Az = 239.92 ZA = 3.48 2008-Apr-24 19:53:28 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 19:53:28 LOG5 finish_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-24 19:53:28 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 19:53:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:53:28 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 19:53:28 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-24 19:53:28 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 19:53:28 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-24 19:53:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 19:53:28 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 19:53:28 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 19:53:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 19:53:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:53:28 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 19:53:28 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-24 19:53:28 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 19:53:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:53:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:53:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 19:53:28 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 19:53:28 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-24 19:53:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 19:53:29 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 19:53:29 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-24 19:53:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 19:53:29 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 19:53:29 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 19:53:29 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 19:53:29 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 19:53:29 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 19:53:29 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-24 19:53:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:53:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 19:53:29 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 7 6 dB 2008-Apr-24 19:53:29 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 6 5 dB 2008-Apr-24 19:53:29 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 4 3 dB 2008-Apr-24 19:53:29 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-24 19:53:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 19:53:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 19:53:29 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-24 19:53:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.922 1.055 ALFA beam 1: 1.053 0.954 2008-Apr-24 19:53:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.954 1.095 ALFA beam 3: 0.918 0.979 2008-Apr-24 19:53:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.049 1.102 ALFA beam 5: 0.950 1.068 2008-Apr-24 19:53:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.927 0.919 ALFA beam 7: 1.017 1.018 2008-Apr-24 19:53:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 19:53:29 LOG5 finish_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-24 19:53:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 19:53:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:53:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 19:53:29 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-24 19:53:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 19:53:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 19:53:29 LOG5 finish_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-24 19:53:29 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 19:53:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:53:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 19:53:29 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-24 19:53:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 19:53:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 19:53:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 19:53:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 19:53:29 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-24 19:53:29 START begin_task: Starting task 'WAPP calibration' 2008-Apr-24 19:53:29 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-24 19:53:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-24 19:53:30 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-24 19:53:30 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 19:53:30 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-24 19:53:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 19:53:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 19:53:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:53:30 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 19:53:30 LOG5 begin_task: Level: (5) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-24 19:53:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 19:53:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 19:53:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 19:53:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:53:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 19:53:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 19:53:30 LOG5 end_task: Level: (5) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-24 19:53:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 19:53:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 19:53:30 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 19:53:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 19:53:30 LOG5 begin_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-24 19:53:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:53:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 19:53:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 19:53:30 LOG5 end_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-24 19:53:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 19:53:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 19:53:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 19:53:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 19:53:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 19:53:30 LOG5 begin_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-24 19:53:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0003.fits 2008-Apr-24 19:53:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 19:53:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 19:53:30 LOG5 end_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-24 19:53:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 19:53:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 19:53:30 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 19:53:30 LOG5 finish_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-24 19:53:30 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-24 19:53:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:53:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 19:53:30 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-24 19:53:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-24 19:53:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 19:53:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 19:53:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 19:53:30 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-24 19:53:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080424.a2048.0003.fits} 2008-Apr-24 19:53:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 19:53:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 19:53:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 19:53:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 19:53:30 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-24 19:53:30 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-24 19:53:30 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-24 19:53:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 19:53:30 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-24 19:53:30 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 19:53:30 LOG5 log_alfabeam: Parameters: 9.8733333333333331 20.058527777777783 9.666325 2008.3171220244885 -39.100086 2008-Apr-24 19:53:30 LOG4 log_alfabeam: ALFABEAM 0 9.873333333333319 20.058527777777780 2008-Apr-24 19:53:30 LOG4 log_alfabeam: ALFABEAM 1 9.873719167889130 19.965630835673018 2008-Apr-24 19:53:30 LOG4 log_alfabeam: ALFABEAM 2 9.879918094699526 20.026204402107425 2008-Apr-24 19:53:30 LOG4 log_alfabeam: ALFABEAM 3 9.879422847444062 20.121374746406175 2008-Apr-24 19:53:30 LOG4 log_alfabeam: ALFABEAM 4 9.872752803187620 20.152081912387093 2008-Apr-24 19:53:30 LOG4 log_alfabeam: ALFABEAM 5 9.866747497370010 20.087688934489066 2008-Apr-24 19:53:30 LOG4 log_alfabeam: ALFABEAM 6 9.867215507200431 19.996378329925026 2008-Apr-24 19:53:30 INFO2 take_spectra: Starting WAPP scan: 811500191 2008-Apr-24 19:53:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 19:53:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 19:53:31 LOG5 begin_task: Level: (5) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-24 19:53:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 19:53:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86012.00 2008-Apr-24 19:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115845 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 19:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 19:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:53:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:53:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 19:53:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.552 > 1.4)! 2008-Apr-24 19:53:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 1.055 1.053 0.954 2008-Apr-24 19:53:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.307 1.531 1.273 1.352 2008-Apr-24 19:53:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.483 1.552 1.329 1.445 2008-Apr-24 19:53:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.307 1.304 1.435 1.442 2008-Apr-24 19:53:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 19:53:37 LOG5 end_task: Level: (5) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-24 19:53:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 19:53:37 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-24 19:53:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 19:53:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 19:53:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 19:53:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 19:53:37 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-24 19:53:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 19:53:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 19:53:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 19:53:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 19:53:38 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-24 19:53:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-24 19:53:38 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-24 19:53:38 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 19:53:38 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-24 19:53:38 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 19:53:38 LOG5 log_alfabeam: Parameters: 9.8733333333333331 20.058527777777783 9.668274 2008.3171222463052 -39.100086 2008-Apr-24 19:53:38 LOG4 log_alfabeam: ALFABEAM 0 9.873333333333321 20.058527777777790 2008-Apr-24 19:53:38 LOG4 log_alfabeam: ALFABEAM 1 9.873744422060948 19.965655413808253 2008-Apr-24 19:53:38 LOG4 log_alfabeam: ALFABEAM 2 9.879927071946897 20.026558860693729 2008-Apr-24 19:53:38 LOG4 log_alfabeam: ALFABEAM 3 9.879405125635632 20.121714584476894 2008-Apr-24 19:53:38 LOG4 log_alfabeam: ALFABEAM 4 9.872725967932855 20.152051083405805 2008-Apr-24 19:53:38 LOG4 log_alfabeam: ALFABEAM 5 9.866739432157017 20.087312562036036 2008-Apr-24 19:53:38 LOG4 log_alfabeam: ALFABEAM 6 9.867232798443183 19.996042147336059 2008-Apr-24 19:53:38 INFO2 take_spectra: Starting WAPP scan: 811500192 2008-Apr-24 19:53:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 19:53:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 19:53:38 LOG5 begin_task: Level: (5) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-24 19:53:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 19:53:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86019.00 2008-Apr-24 19:53:43 INFO5 check_wapp_levels: WAPP power levels are between 1.273 and 1.552 (still bad) 2008-Apr-24 19:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115845 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 19:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 19:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:53:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:53:44 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-24 19:53:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 19:53:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 19:53:44 LOG5 end_task: Level: (5) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-24 19:53:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 19:53:44 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-24 19:53:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 19:53:44 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-24 19:53:44 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-24 19:53:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-24 19:53:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:53:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-24 19:53:44 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-24 19:53:45 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-24 19:53:45 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 240.99 and ZA = 3.49 2008-Apr-24 19:53:45 LOG3 track_source: Calling 'track_source AGES3193_p1_154 240.99 3.4919536038 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 19:53:45 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 19:53:45 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-24 19:53:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_154} INFO {Slewing to source 'AGES3193_p1_154' ...} 2008-Apr-24 19:53:45 INFO1 track_source: Starting to track AGES3193_p1_154 2008-Apr-24 19:53:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_154" 2008-Apr-24 19:53:45 LOG3 vw_send: To DATATAKING: set ra 240.99 2008-Apr-24 19:53:45 LOG3 vw_send: To DATATAKING: set dec 3.4919536038 2008-Apr-24 19:53:45 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 19:53:45 LOG3 vw_send: To DATATAKING: pnt tr 240.99 3.4919536038 -CF 2008-Apr-24 19:53:45 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:53:45 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 19:53:45 LOG5 finish_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-24 19:53:45 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 19:53:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 19:53:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 19:53:45 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-24 19:53:45 LOG1 fixed_driftmap: Parameters: HA = -00:13:00.0 Start = 09:40:28.9 LST = 09:40:12.8 diff = 16.1 secs 2008-Apr-24 19:53:45 INFO2 fixed_driftmap: Waiting 14.1 seconds for RA 9:53:29 2008-Apr-24 19:53:45 INFO2 lstwait: Waiting for 14.1 secs from LST 09:40:13 to LST 09:40:27 ... 2008-Apr-24 19:53:45 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14.088558600651741 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 19:53:45 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-24 19:53:45 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-24 19:53:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_154" 2008-Apr-24 19:53:45 LOG4 got_cormsg: From DATATAKING: set ra 240.99 2008-Apr-24 19:53:45 LOG4 got_cormsg: From DATATAKING: set dec 3.4919536038 2008-Apr-24 19:53:45 LOG4 got_cormsg: From DATATAKING: vw% 240.99 2008-Apr-24 19:53:45 LOG4 got_cormsg: From DATATAKING: vw% 3.4919536038 2008-Apr-24 19:53:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:53:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 19:53:45 LOG4 got_cormsg: From DATATAKING: pnt tr 240.99 3.4919536038 -CF 2008-Apr-24 19:53:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 19:53:45 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 19:53:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 19:53:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.916 and 1.101 2008-Apr-24 19:53:59 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-24 19:53:59 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-24 19:53:59 LOG4 lstwait: Finished waiting, the gui caused difference: 0.91366867999695955 2008-Apr-24 19:53:59 INFO3 lstwait: Finished waiting 2008-Apr-24 19:53:59 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 19:53:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-24 19:53:59 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 19:53:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-24 19:53:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-24 19:53:59 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-24 19:53:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 19:53:59 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-24 19:53:59 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-24 19:53:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-24 19:53:59 INFO2 take_spectra: Starting WAPP scan: 811500193 2008-Apr-24 19:54:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-24 19:54:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 19:54:00 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-24 19:54:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 19:54:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86041.00 2008-Apr-24 19:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115845 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 19:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 19:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 19:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 19:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115845 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:14:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 20:14:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 20:14:01 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-24 20:14:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 20:14:01 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-24 20:14:01 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-24 20:14:01 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-24 20:14:01 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-24 20:14:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 20:14:01 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-24 20:14:01 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-24 20:14:01 COMMAND run_command_line: EXECUTING command 19: 'FIXEDDRIFT az=118.28 alfaangle=78.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_156 ra=95300.00 dec=200030.00' 2008-Apr-24 20:14:01 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-24 20:14:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 20:14:02 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 118.28 78.2 hcorcal 5 tracking no first 1 AGES3193_p1_156 95300.00 200030.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 20:14:02 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-24 20:14:02 LOG5 begin_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-24 20:14:02 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_154' 2008-Apr-24 20:14:02 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-24 20:14:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_156} 2008-Apr-24 20:14:02 INFO3 fixed_driftmap: Sending telescope to Az = 118.28 and ZA = 3.47 2008-Apr-24 20:14:02 LOG3 track_source: Calling 'track_source AGES3193_p1_156 118.28 3.4687889752 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 20:14:02 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 20:14:02 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-24 20:14:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_156} INFO {Slewing to source 'AGES3193_p1_156' ...} 2008-Apr-24 20:14:02 INFO1 track_source: Starting to track AGES3193_p1_156 2008-Apr-24 20:14:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_156" 2008-Apr-24 20:14:02 LOG3 vw_send: To DATATAKING: set ra 118.28 2008-Apr-24 20:14:02 LOG3 vw_send: To DATATAKING: set dec 3.4687889752 2008-Apr-24 20:14:02 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 20:14:02 LOG3 vw_send: To DATATAKING: pnt tr 118.28 3.4687889752 -CF 2008-Apr-24 20:14:02 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 20:14:02 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 20:14:02 LOG5 finish_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-24 20:14:02 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 20:14:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:14:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 20:14:02 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-24 20:14:02 START begin_task: Starting task 'rotate ALFA to +78.2 degrees' 2008-Apr-24 20:14:02 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-24 20:14:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +78.2 degrees ...} 2008-Apr-24 20:14:02 INFO2 rotate_alfa: ALFA commanded to +78.2 degrees 2008-Apr-24 20:14:02 LOG3 sock_errsend: To ALFAMOTOR: POSITION 78.2 REPLY 2008-Apr-24 20:14:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 20:14:02 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 20:14:02 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-24 20:14:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_156" 2008-Apr-24 20:14:02 LOG4 got_cormsg: From DATATAKING: set ra 118.28 2008-Apr-24 20:14:02 LOG4 got_cormsg: From DATATAKING: set dec 3.4687889752 2008-Apr-24 20:14:02 LOG4 got_cormsg: From DATATAKING: vw% 118.28 2008-Apr-24 20:14:02 LOG4 got_cormsg: From DATATAKING: vw% 3.4687889752 2008-Apr-24 20:14:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:14:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 20:14:02 LOG4 got_cormsg: From DATATAKING: pnt tr 118.28 3.4687889752 -CF 2008-Apr-24 20:14:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 20:14:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 20:14:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:15:07 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 20:15:07 INFO3 alfa_motor: ALFA rotator in-position +78.20 degrees 2008-Apr-24 20:15:07 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 20:15:07 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-24 20:15:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 20:15:08 STOP finish_task: Finishing task 'rotate ALFA to +78.2 degrees' 2008-Apr-24 20:15:08 LOG5 finish_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-24 20:15:08 INFO2 finish_task: DONE finished configuration: rotating ALFA to +78.2 degrees 2008-Apr-24 20:15:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:15:08 STOP end_task: Finishing task 'rotate ALFA to +78.2 degrees' with status 'OK' 2008-Apr-24 20:15:08 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-24 20:15:08 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 20:15:08 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-24 20:15:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 20:15:08 LOG3 waittrk: Start waittrk 5 2008-Apr-24 20:15:08 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 20:15:08 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-24 20:15:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 20:15:13 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-24 20:15:13 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 20:15:13 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-24 20:19:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 20:19:06 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-24 20:19:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 20:19:06 INFO2 waittrk: Now tracking AGES3193_p1_156 2008-Apr-24 20:19:06 LOG4 waittrk: Current telescope position: Az = 118.16 ZA = 3.47 2008-Apr-24 20:19:06 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 20:19:06 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-24 20:19:06 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 20:19:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:19:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 20:19:06 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-24 20:19:06 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 20:19:06 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-24 20:19:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 20:19:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 20:19:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 20:19:06 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 20:19:06 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-24 20:19:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 20:19:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 20:19:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:19:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 20:19:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 20:19:07 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-24 20:19:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 20:19:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 20:19:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 20:19:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 20:19:07 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-24 20:19:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:19:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 20:19:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 20:19:07 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-24 20:19:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 20:19:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 20:19:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 20:19:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 20:19:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 20:19:07 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-24 20:19:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 20:19:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 20:19:07 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-24 20:19:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 20:19:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 20:19:07 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 20:19:07 LOG5 finish_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-24 20:19:07 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 20:19:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:19:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 20:19:07 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-24 20:19:08 LOG5 dopset_later: Calling 'dopset_later 48.789006255336162' 2008-Apr-24 20:19:08 INFO3 dopset_later: Setting Doppler correction for 20:19:56 (48.8 seconds from now) 2008-Apr-24 20:19:08 LOG5 antvel: Calling 'antvel 118.280000 3.468789 F 48.789006255336162' 2008-Apr-24 20:19:08 LOG2 antvel: Parameters to Doppler: Heliocentric 87596 2008 115 0.0 2008-Apr-24 20:19:08 INFO5 antvel: Computed antenna velocity: +27.74375 km/s 2008-Apr-24 20:19:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.743745781499999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-24 20:19:08 INFO4 dopset_gen: New sky frequencies: 1381.115616 1381.115616 1381.115616 1381.115616 1381.115616 1381.115616 1381.115616 1381.115616 1381.115616 2008-Apr-24 20:19:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.115616 sky0=1381.115616 sky1=1381.115616 sky2=1381.115616 sky3=1381.115616 sky4=1381.115616 sky5=1381.115616 sky6=1381.115616 sky7=1381.115616 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 20:19:08 LOG2 dopset_gen: Result from 'sky2syn': 1631.115616 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 20:19:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631115616.0} 2008-Apr-24 20:19:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 20:19:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-24 20:19:08 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-24 20:19:08 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:15.3 Dec = +20:00:30.6 2008-Apr-24 20:19:08 LOG3 track_source: Calling 'track_source AGES3193_p1_156 095215.3 200030.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 20:19:08 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 20:19:08 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-24 20:19:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_156} INFO {Slewing to source 'AGES3193_p1_156' ...} 2008-Apr-24 20:19:08 INFO1 track_source: Starting to track AGES3193_p1_156 2008-Apr-24 20:19:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_156" 2008-Apr-24 20:19:08 LOG3 vw_send: To DATATAKING: set ra 095215.3 2008-Apr-24 20:19:08 LOG3 vw_send: To DATATAKING: set dec 200030.6 2008-Apr-24 20:19:08 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 20:19:08 LOG3 vw_send: To DATATAKING: pnt tr 095215.3 200030.6 -CJ 2008-Apr-24 20:19:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 20:19:08 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 20:19:08 LOG5 finish_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-24 20:19:08 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 20:19:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:19:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 20:19:08 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-24 20:19:08 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 20:19:08 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-24 20:19:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 20:19:08 LOG3 waittrk: Start waittrk 5 2008-Apr-24 20:19:08 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 20:19:08 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631115616.0} 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_156" 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: set ra 095215.3 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: set dec 200030.6 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: pnt tr 095215.3 200030.6 -CJ 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: 095215.3 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: vw% 200030.6 2008-Apr-24 20:19:08 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-24 20:19:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 20:19:13 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-24 20:19:13 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 20:19:13 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-24 20:19:15 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 20:19:15 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-24 20:19:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 20:19:15 INFO2 waittrk: Now tracking AGES3193_p1_156 2008-Apr-24 20:19:15 LOG4 waittrk: Current telescope position: Az = 118.04 ZA = 3.48 2008-Apr-24 20:19:15 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 20:19:15 LOG5 finish_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-24 20:19:15 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 20:19:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:19:15 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 20:19:15 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-24 20:19:15 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 20:19:15 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-24 20:19:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 20:19:15 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 20:19:15 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 20:19:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 20:19:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 20:19:15 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 20:19:15 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-24 20:19:15 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 20:19:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 20:19:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:19:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 20:19:15 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 20:19:15 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-24 20:19:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 20:19:16 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 20:19:16 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-24 20:19:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 20:19:16 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 20:19:16 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 20:19:16 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 20:19:16 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 20:19:16 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 20:19:16 LOG5 begin_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-24 20:19:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 20:19:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:19:16 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 7 6 dB 2008-Apr-24 20:19:16 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 6 5 dB 2008-Apr-24 20:19:16 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 4 3 dB 2008-Apr-24 20:19:16 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-24 20:19:16 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 20:19:16 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 20:19:16 LOG5 end_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-24 20:19:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.914 0.928 ALFA beam 1: 1.035 0.988 2008-Apr-24 20:19:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.973 1.118 ALFA beam 3: 0.931 0.967 2008-Apr-24 20:19:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.079 0.898 ALFA beam 5: 0.943 1.099 2008-Apr-24 20:19:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.904 0.947 ALFA beam 7: 0.992 1.049 2008-Apr-24 20:19:16 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 20:19:16 LOG5 finish_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-24 20:19:16 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 20:19:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:19:16 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 20:19:16 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-24 20:19:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 20:19:16 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 20:19:16 LOG5 finish_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-24 20:19:16 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 20:19:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:19:16 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 20:19:16 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-24 20:19:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 20:19:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 20:19:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 20:19:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 20:19:16 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-24 20:19:16 START begin_task: Starting task 'WAPP calibration' 2008-Apr-24 20:19:16 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-24 20:19:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-24 20:19:17 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-24 20:19:17 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 20:19:17 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-24 20:19:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 20:19:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 20:19:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 20:19:17 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 20:19:17 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-24 20:19:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 20:19:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 20:19:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 20:19:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:19:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 20:19:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 20:19:17 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-24 20:19:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 20:19:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 20:19:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 20:19:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 20:19:17 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-24 20:19:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:19:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 20:19:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 20:19:17 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-24 20:19:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 20:19:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 20:19:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 20:19:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 20:19:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 20:19:17 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-24 20:19:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0004.fits 2008-Apr-24 20:19:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 20:19:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 20:19:17 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-24 20:19:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 20:19:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 20:19:17 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 20:19:17 LOG5 finish_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-24 20:19:17 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-24 20:19:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:19:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 20:19:17 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-24 20:19:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-24 20:19:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 20:19:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 20:19:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 20:19:17 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-24 20:19:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080424.a2048.0004.fits} 2008-Apr-24 20:19:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 20:19:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 20:19:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 20:19:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 20:19:17 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-24 20:19:17 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-24 20:19:17 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-24 20:19:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 20:19:17 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-24 20:19:17 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 20:19:17 LOG5 log_alfabeam: Parameters: 9.8709166666666679 20.008500000000002 10.097223 2008.3171710459603 78.199959 2008-Apr-24 20:19:17 LOG4 log_alfabeam: ALFABEAM 0 9.870916666666673 20.008500000000005 2008-Apr-24 20:19:17 LOG4 log_alfabeam: ALFABEAM 1 9.873304118139211 19.916464655508225 2008-Apr-24 20:19:17 LOG4 log_alfabeam: ALFABEAM 2 9.878104149682621 19.977251000563140 2008-Apr-24 20:19:17 LOG4 log_alfabeam: ALFABEAM 3 9.875859977381577 20.069533447012230 2008-Apr-24 20:19:17 LOG4 log_alfabeam: ALFABEAM 4 9.868699574828051 20.102395407418300 2008-Apr-24 20:19:17 LOG4 log_alfabeam: ALFABEAM 5 9.863696777348858 20.038643516689948 2008-Apr-24 20:19:17 LOG4 log_alfabeam: ALFABEAM 6 9.866060315152559 19.944984371995247 2008-Apr-24 20:19:17 INFO2 take_spectra: Starting WAPP scan: 811500194 2008-Apr-24 20:19:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 20:19:18 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 20:19:18 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-24 20:19:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 20:19:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1159.00 2008-Apr-24 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115616 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:19:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.420 > 1.4)! 2008-Apr-24 20:19:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.268 1.200 1.420 1.359 2008-Apr-24 20:19:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.118 0.931 0.967 2008-Apr-24 20:19:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.898 0.943 1.099 2008-Apr-24 20:19:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.947 0.992 1.049 2008-Apr-24 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:19:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 20:19:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 20:19:24 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-24 20:19:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 20:19:24 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-24 20:19:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 20:19:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 20:19:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 20:19:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 20:19:24 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-24 20:19:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 20:19:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 20:19:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 20:19:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 20:19:24 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-24 20:19:25 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-24 20:19:25 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-24 20:19:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 20:19:25 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-24 20:19:25 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 20:19:25 LOG5 log_alfabeam: Parameters: 9.8709166666666679 20.008500000000002 10.099173 2008.317171267777 78.199959 2008-Apr-24 20:19:25 LOG4 log_alfabeam: ALFABEAM 0 9.870916666666679 20.008500000000002 2008-Apr-24 20:19:25 LOG4 log_alfabeam: ALFABEAM 1 9.873327766839660 19.916583678496789 2008-Apr-24 20:19:25 LOG4 log_alfabeam: ALFABEAM 2 9.878112451769040 19.977631392086060 2008-Apr-24 20:19:25 LOG4 log_alfabeam: ALFABEAM 3 9.875843566289282 20.069800598894030 2008-Apr-24 20:19:25 LOG4 log_alfabeam: ALFABEAM 4 9.868674201428673 20.102272190701939 2008-Apr-24 20:19:25 LOG4 log_alfabeam: ALFABEAM 5 9.863688986069565 20.038268712800761 2008-Apr-24 20:19:25 LOG4 log_alfabeam: ALFABEAM 6 9.866076790148032 19.944738891617266 2008-Apr-24 20:19:25 INFO2 take_spectra: Starting WAPP scan: 811500195 2008-Apr-24 20:19:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 20:19:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 20:19:25 LOG5 begin_task: Level: (5) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-24 20:19:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 20:19:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1166.00 2008-Apr-24 20:19:30 INFO5 check_wapp_levels: WAPP power levels are between 1.200 and 1.557 (still bad) 2008-Apr-24 20:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115616 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 20:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 20:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:19:31 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-24 20:19:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 20:19:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 20:19:31 LOG5 end_task: Level: (5) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-24 20:19:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 20:19:31 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-24 20:19:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 20:19:31 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-24 20:19:31 LOG5 finish_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-24 20:19:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-24 20:19:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:19:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-24 20:19:31 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-24 20:19:31 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-24 20:19:32 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 118.28 and ZA = 3.47 2008-Apr-24 20:19:32 LOG3 track_source: Calling 'track_source AGES3193_p1_156 118.28 3.4687889752 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 20:19:32 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 20:19:32 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-24 20:19:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_156} INFO {Slewing to source 'AGES3193_p1_156' ...} 2008-Apr-24 20:19:32 INFO1 track_source: Starting to track AGES3193_p1_156 2008-Apr-24 20:19:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_156" 2008-Apr-24 20:19:32 LOG3 vw_send: To DATATAKING: set ra 118.28 2008-Apr-24 20:19:32 LOG3 vw_send: To DATATAKING: set dec 3.4687889752 2008-Apr-24 20:19:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 20:19:32 LOG3 vw_send: To DATATAKING: pnt tr 118.28 3.4687889752 -CF 2008-Apr-24 20:19:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 20:19:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 20:19:32 LOG5 finish_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-24 20:19:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 20:19:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:19:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 20:19:32 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-24 20:19:32 LOG1 fixed_driftmap: Parameters: HA = +00:13:00.0 Start = 10:06:28.9 LST = 10:06:04.0 diff = 24.9 secs 2008-Apr-24 20:19:32 INFO2 fixed_driftmap: Waiting 22.9 seconds for RA 9:53:29 2008-Apr-24 20:19:32 INFO2 lstwait: Waiting for 22.8 secs from LST 10:06:04 to LST 10:06:27 ... 2008-Apr-24 20:19:32 LOG4 send_obs_status: To obs_status: <1> TASKTIME 22.794176861738851 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 20:19:32 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-24 20:19:32 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-24 20:19:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_156" 2008-Apr-24 20:19:32 LOG4 got_cormsg: From DATATAKING: set ra 118.28 2008-Apr-24 20:19:32 LOG4 got_cormsg: From DATATAKING: set dec 3.4687889752 2008-Apr-24 20:19:32 LOG4 got_cormsg: From DATATAKING: vw% 118.28 2008-Apr-24 20:19:32 LOG4 got_cormsg: From DATATAKING: vw% 3.4687889752 2008-Apr-24 20:19:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:19:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 20:19:32 LOG4 got_cormsg: From DATATAKING: pnt tr 118.28 3.4687889752 -CF 2008-Apr-24 20:19:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 20:19:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 20:19:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:19:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.117 2008-Apr-24 20:19:55 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-24 20:19:55 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-24 20:19:55 LOG4 lstwait: Finished waiting, the gui caused difference: 0.20501551999743128 2008-Apr-24 20:19:55 INFO3 lstwait: Finished waiting 2008-Apr-24 20:19:55 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 20:19:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-24 20:19:55 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 20:19:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-24 20:19:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-24 20:19:55 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-24 20:19:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 20:19:55 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-24 20:19:55 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-24 20:19:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-24 20:19:55 INFO2 take_spectra: Starting WAPP scan: 811500196 2008-Apr-24 20:19:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-24 20:19:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 20:19:55 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-24 20:19:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 20:19:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1196.00 2008-Apr-24 20:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115616 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 20:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 20:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115616 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:25:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.734 < 0.8)! 2008-Apr-24 20:25:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.917 0.734 1.031 0.973 2008-Apr-24 20:25:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.110 0.933 0.967 2008-Apr-24 20:25:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.897 0.950 1.101 2008-Apr-24 20:25:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.907 0.950 0.995 1.051 2008-Apr-24 20:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.695 and 1.109 (still bad) 2008-Apr-24 20:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.688 and 1.111 (still bad) 2008-Apr-24 20:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.110 (still bad) 2008-Apr-24 20:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.682 and 1.110 (still bad) 2008-Apr-24 20:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.110 (still bad) 2008-Apr-24 20:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.110 (still bad) 2008-Apr-24 20:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.110 (still bad) 2008-Apr-24 20:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.110 (still bad) 2008-Apr-24 20:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.110 (still bad) 2008-Apr-24 20:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.109 (still bad) 2008-Apr-24 20:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.111 (still bad) 2008-Apr-24 20:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.107 (still bad) 2008-Apr-24 20:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.109 (still bad) 2008-Apr-24 20:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.685 and 1.109 (still bad) 2008-Apr-24 20:26:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.809 and 1.110 2008-Apr-24 20:39:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 20:39:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 20:39:56 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Apr-24 20:39:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 20:39:56 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-24 20:39:56 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-24 20:39:56 LOG5 finish_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-24 20:39:56 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-24 20:39:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 20:39:56 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-24 20:39:56 LOG5 end_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-24 20:39:56 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=101.89 alfaangle=-81.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_158 ra=95300.00 dec=195730.00' 2008-Apr-24 20:39:57 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-24 20:39:57 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 20:39:57 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 101.89 -81.3 hcorcal 5 tracking no first 1 AGES3193_p1_158 95300.00 195730.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 20:39:57 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-24 20:39:57 LOG5 begin_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-24 20:39:57 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_156' 2008-Apr-24 20:39:57 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-24 20:39:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_158} 2008-Apr-24 20:39:57 INFO3 fixed_driftmap: Sending telescope to Az = 101.89 and ZA = 8.64 2008-Apr-24 20:39:57 LOG3 track_source: Calling 'track_source AGES3193_p1_158 101.89 8.6426993974 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 20:39:57 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 20:39:57 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-24 20:39:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_158} INFO {Slewing to source 'AGES3193_p1_158' ...} 2008-Apr-24 20:39:57 INFO1 track_source: Starting to track AGES3193_p1_158 2008-Apr-24 20:39:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_158" 2008-Apr-24 20:39:57 LOG3 vw_send: To DATATAKING: set ra 101.89 2008-Apr-24 20:39:57 LOG3 vw_send: To DATATAKING: set dec 8.6426993974 2008-Apr-24 20:39:57 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 20:39:57 LOG3 vw_send: To DATATAKING: pnt tr 101.89 8.6426993974 -CF 2008-Apr-24 20:39:57 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 20:39:57 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 20:39:57 LOG5 finish_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-24 20:39:57 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 20:39:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:39:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 20:39:57 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-24 20:39:57 START begin_task: Starting task 'rotate ALFA to -81.3 degrees' 2008-Apr-24 20:39:57 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-24 20:39:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -81.3 degrees ...} 2008-Apr-24 20:39:57 INFO2 rotate_alfa: ALFA commanded to -81.3 degrees 2008-Apr-24 20:39:57 LOG3 sock_errsend: To ALFAMOTOR: POSITION -81.3 REPLY 2008-Apr-24 20:39:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 20:39:57 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 20:39:57 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-24 20:39:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_158" 2008-Apr-24 20:39:57 LOG4 got_cormsg: From DATATAKING: set ra 101.89 2008-Apr-24 20:39:57 LOG4 got_cormsg: From DATATAKING: set dec 8.6426993974 2008-Apr-24 20:39:57 LOG4 got_cormsg: From DATATAKING: vw% 101.89 2008-Apr-24 20:39:57 LOG4 got_cormsg: From DATATAKING: vw% 8.6426993974 2008-Apr-24 20:39:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:39:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 20:39:57 LOG4 got_cormsg: From DATATAKING: pnt tr 101.89 8.6426993974 -CF 2008-Apr-24 20:39:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 20:39:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 20:39:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:41:26 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 20:41:26 INFO3 alfa_motor: ALFA rotator in-position -81.30 degrees 2008-Apr-24 20:41:26 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 20:41:26 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-24 20:41:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 20:41:26 STOP finish_task: Finishing task 'rotate ALFA to -81.3 degrees' 2008-Apr-24 20:41:26 LOG5 finish_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-24 20:41:26 INFO2 finish_task: DONE finished configuration: rotating ALFA to -81.3 degrees 2008-Apr-24 20:41:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:41:26 STOP end_task: Finishing task 'rotate ALFA to -81.3 degrees' with status 'OK' 2008-Apr-24 20:41:26 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-24 20:41:26 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 20:41:26 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-24 20:41:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 20:41:26 LOG3 waittrk: Start waittrk 5 2008-Apr-24 20:41:26 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 20:41:26 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-24 20:41:31 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 20:41:31 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-24 20:41:31 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 20:41:31 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-24 20:42:12 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 20:42:12 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-24 20:42:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 20:42:12 INFO2 waittrk: Now tracking AGES3193_p1_158 2008-Apr-24 20:42:12 LOG4 waittrk: Current telescope position: Az = 101.75 ZA = 8.64 2008-Apr-24 20:42:12 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 20:42:12 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-24 20:42:12 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 20:42:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:42:12 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 20:42:12 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-24 20:42:12 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 20:42:12 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-24 20:42:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 20:42:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 20:42:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 20:42:12 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 20:42:12 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-24 20:42:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 20:42:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 20:42:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 20:42:13 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-24 20:42:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 20:42:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 20:42:13 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 20:42:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 20:42:13 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:42:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 20:42:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 20:42:13 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-24 20:42:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 20:42:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 20:42:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 20:42:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 20:42:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 20:42:13 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-24 20:42:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 20:42:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 20:42:13 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-24 20:42:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 20:42:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 20:42:13 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 20:42:13 LOG5 finish_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-24 20:42:13 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 20:42:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:42:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 20:42:13 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-24 20:42:13 LOG5 dopset_later: Calling 'dopset_later 38.623671316762106' 2008-Apr-24 20:42:13 INFO3 dopset_later: Setting Doppler correction for 20:42:52 (38.6 seconds from now) 2008-Apr-24 20:42:13 LOG5 antvel: Calling 'antvel 101.890000 8.642699 F 38.623671316762106' 2008-Apr-24 20:42:13 LOG2 antvel: Parameters to Doppler: Heliocentric 88972 2008 115 0.0 2008-Apr-24 20:42:13 INFO5 antvel: Computed antenna velocity: +27.78746 km/s 2008-Apr-24 20:42:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.787455168600001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-24 20:42:13 INFO4 dopset_gen: New sky frequencies: 1381.115414 1381.115414 1381.115414 1381.115414 1381.115414 1381.115414 1381.115414 1381.115414 1381.115414 2008-Apr-24 20:42:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.115414 sky0=1381.115414 sky1=1381.115414 sky2=1381.115414 sky3=1381.115414 sky4=1381.115414 sky5=1381.115414 sky6=1381.115414 sky7=1381.115414 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 20:42:13 LOG2 dopset_gen: Result from 'sky2syn': 1631.115414 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 20:42:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631115414.0} 2008-Apr-24 20:42:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 20:42:13 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-24 20:42:13 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-24 20:42:13 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:25.5 Dec = +19:57:30.7 2008-Apr-24 20:42:13 LOG3 track_source: Calling 'track_source AGES3193_p1_158 095225.5 195730.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 20:42:13 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 20:42:13 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-24 20:42:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_158} INFO {Slewing to source 'AGES3193_p1_158' ...} 2008-Apr-24 20:42:13 INFO1 track_source: Starting to track AGES3193_p1_158 2008-Apr-24 20:42:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_158" 2008-Apr-24 20:42:13 LOG3 vw_send: To DATATAKING: set ra 095225.5 2008-Apr-24 20:42:13 LOG3 vw_send: To DATATAKING: set dec 195730.7 2008-Apr-24 20:42:13 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 20:42:13 LOG3 vw_send: To DATATAKING: pnt tr 095225.5 195730.7 -CJ 2008-Apr-24 20:42:13 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 20:42:13 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 20:42:13 LOG5 finish_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-24 20:42:13 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 20:42:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:42:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 20:42:13 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-24 20:42:13 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 20:42:13 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-24 20:42:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 20:42:13 LOG3 waittrk: Start waittrk 5 2008-Apr-24 20:42:13 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 20:42:13 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631115414.0} 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_158" 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: set ra 095225.5 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: set dec 195730.7 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: pnt tr 095225.5 195730.7 -CJ 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: 095225.5 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: vw% 195730.7 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-24 20:42:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 20:42:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:42:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 20:42:18 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-24 20:42:18 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 20:42:18 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-24 20:42:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 20:42:21 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-24 20:42:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 20:42:21 INFO2 waittrk: Now tracking AGES3193_p1_158 2008-Apr-24 20:42:21 LOG4 waittrk: Current telescope position: Az = 101.74 ZA = 8.65 2008-Apr-24 20:42:21 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 20:42:21 LOG5 finish_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-24 20:42:21 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 20:42:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:42:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 20:42:21 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-24 20:42:21 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 20:42:21 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-24 20:42:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 20:42:21 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 20:42:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 20:42:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 20:42:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 20:42:21 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 20:42:21 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-24 20:42:21 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 20:42:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 20:42:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:42:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 20:42:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 20:42:21 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-24 20:42:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 20:42:21 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 20:42:21 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-24 20:42:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 20:42:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 20:42:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 20:42:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 20:42:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 20:42:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 20:42:21 LOG5 begin_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-24 20:42:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:42:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 20:42:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 7 6 dB 2008-Apr-24 20:42:22 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 6 6 dB 2008-Apr-24 20:42:22 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 4 3 dB 2008-Apr-24 20:42:22 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-24 20:42:22 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 20:42:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 20:42:22 LOG5 end_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-24 20:42:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.939 1.101 ALFA beam 1: 1.057 0.945 2008-Apr-24 20:42:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.986 1.118 ALFA beam 3: 0.931 1.005 2008-Apr-24 20:42:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.095 0.928 ALFA beam 5: 0.994 0.888 2008-Apr-24 20:42:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.960 0.943 ALFA beam 7: 1.051 1.043 2008-Apr-24 20:42:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 20:42:22 LOG5 finish_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-24 20:42:22 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 20:42:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:42:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 20:42:22 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-24 20:42:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 20:42:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 20:42:22 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-24 20:42:22 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 20:42:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:42:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 20:42:22 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-24 20:42:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 20:42:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 20:42:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 20:42:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 20:42:22 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-24 20:42:22 START begin_task: Starting task 'WAPP calibration' 2008-Apr-24 20:42:22 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-24 20:42:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-24 20:42:22 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-24 20:42:22 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 20:42:22 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-24 20:42:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 20:42:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 20:42:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 20:42:22 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 20:42:22 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-24 20:42:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 20:42:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 20:42:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 20:42:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:42:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 20:42:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 20:42:22 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-24 20:42:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 20:42:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 20:42:22 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 20:42:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 20:42:22 LOG5 begin_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-24 20:42:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:42:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 20:42:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 20:42:22 LOG5 end_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-24 20:42:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 20:42:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 20:42:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 20:42:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 20:42:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 20:42:22 LOG5 begin_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-24 20:42:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0005.fits 2008-Apr-24 20:42:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 20:42:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 20:42:23 LOG5 end_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-24 20:42:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 20:42:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 20:42:23 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 20:42:23 LOG5 finish_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-24 20:42:23 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-24 20:42:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:42:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 20:42:23 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-24 20:42:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-24 20:42:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 20:42:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 20:42:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 20:42:23 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-24 20:42:23 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080424.a2048.0005.fits} 2008-Apr-24 20:42:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 20:42:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 20:42:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 20:42:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 20:42:23 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-24 20:42:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-24 20:42:23 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-24 20:42:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 20:42:23 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-24 20:42:23 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 20:42:23 LOG5 log_alfabeam: Parameters: 9.8737500000000011 19.958527777777782 10.482999 2008.3172149339621 -81.300041 2008-Apr-24 20:42:23 LOG4 log_alfabeam: ALFABEAM 0 9.873750000000005 19.958527777777789 2008-Apr-24 20:42:23 LOG4 log_alfabeam: ALFABEAM 1 9.871999028207366 20.048953969727958 2008-Apr-24 20:42:23 LOG4 log_alfabeam: ALFABEAM 2 9.866513547218984 19.988587645464868 2008-Apr-24 20:42:23 LOG4 log_alfabeam: ALFABEAM 3 9.868312351548049 19.897735568960705 2008-Apr-24 20:42:23 LOG4 log_alfabeam: ALFABEAM 4 9.875565404614019 19.868716111783865 2008-Apr-24 20:42:23 LOG4 log_alfabeam: ALFABEAM 5 9.880988894714436 19.928728414076986 2008-Apr-24 20:42:23 LOG4 log_alfabeam: ALFABEAM 6 9.879220721337035 20.018116032762173 2008-Apr-24 20:42:23 INFO2 take_spectra: Starting WAPP scan: 811500197 2008-Apr-24 20:42:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 20:42:23 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 20:42:23 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-24 20:42:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 20:42:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2544.00 2008-Apr-24 20:42:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115414 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 20:42:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:42:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:42:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 20:42:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:42:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:42:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:42:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:42:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:42:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 20:42:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.562 > 1.4)! 2008-Apr-24 20:42:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.294 1.413 1.440 1.308 2008-Apr-24 20:42:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.340 1.562 1.299 1.384 2008-Apr-24 20:42:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.536 1.293 1.380 1.189 2008-Apr-24 20:42:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.349 1.331 1.481 1.472 2008-Apr-24 20:42:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 20:42:29 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-24 20:42:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 20:42:29 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-24 20:42:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 20:42:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 20:42:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 20:42:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 20:42:29 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-24 20:42:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 20:42:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 20:42:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 20:42:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 20:42:29 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-24 20:42:29 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-24 20:42:29 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-24 20:42:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 20:42:29 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-24 20:42:29 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 20:42:30 LOG5 log_alfabeam: Parameters: 9.8737500000000011 19.958527777777782 10.484949 2008.3172151557787 -81.300041 2008-Apr-24 20:42:30 LOG4 log_alfabeam: ALFABEAM 0 9.873750000000005 19.958527777777778 2008-Apr-24 20:42:30 LOG4 log_alfabeam: ALFABEAM 1 9.871994690645089 20.048936697890881 2008-Apr-24 20:42:30 LOG4 log_alfabeam: ALFABEAM 2 9.866512135871188 19.988519839801935 2008-Apr-24 20:42:30 LOG4 log_alfabeam: ALFABEAM 3 9.868315148812494 19.897686873006194 2008-Apr-24 20:42:30 LOG4 log_alfabeam: ALFABEAM 4 9.875569497928355 19.868732017572082 2008-Apr-24 20:42:30 LOG4 log_alfabeam: ALFABEAM 5 9.880990280018448 19.928795206003478 2008-Apr-24 20:42:30 LOG4 log_alfabeam: ALFABEAM 6 9.879217888050054 20.018168737621050 2008-Apr-24 20:42:30 INFO2 take_spectra: Starting WAPP scan: 811500198 2008-Apr-24 20:42:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 20:42:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 20:42:30 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-24 20:42:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 20:42:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2551.00 2008-Apr-24 20:42:35 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.562 (still bad) 2008-Apr-24 20:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115414 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 20:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 20:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:42:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:42:36 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-24 20:42:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 20:42:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 20:42:36 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-24 20:42:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 20:42:36 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-24 20:42:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 20:42:36 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-24 20:42:36 LOG5 finish_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-24 20:42:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-24 20:42:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:42:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-24 20:42:36 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-24 20:42:37 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-24 20:42:37 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 101.89 and ZA = 8.64 2008-Apr-24 20:42:37 LOG3 track_source: Calling 'track_source AGES3193_p1_158 101.89 8.6426993974 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 20:42:37 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 20:42:37 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-24 20:42:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_158} INFO {Slewing to source 'AGES3193_p1_158' ...} 2008-Apr-24 20:42:37 INFO1 track_source: Starting to track AGES3193_p1_158 2008-Apr-24 20:42:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_158" 2008-Apr-24 20:42:37 LOG3 vw_send: To DATATAKING: set ra 101.89 2008-Apr-24 20:42:37 LOG3 vw_send: To DATATAKING: set dec 8.6426993974 2008-Apr-24 20:42:37 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 20:42:37 LOG3 vw_send: To DATATAKING: pnt tr 101.89 8.6426993974 -CF 2008-Apr-24 20:42:37 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 20:42:37 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 20:42:37 LOG5 finish_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-24 20:42:37 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 20:42:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 20:42:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 20:42:37 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-24 20:42:37 LOG1 fixed_driftmap: Parameters: HA = +00:35:59.6 Start = 10:29:28.5 LST = 10:29:12.8 diff = 15.7 secs 2008-Apr-24 20:42:37 INFO2 fixed_driftmap: Waiting 13.7 seconds for RA 9:53:29 2008-Apr-24 20:42:37 INFO2 lstwait: Waiting for 13.6 secs from LST 10:29:13 to LST 10:29:27 ... 2008-Apr-24 20:42:37 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.630499509401318 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 20:42:37 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-24 20:42:37 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-24 20:42:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_158" 2008-Apr-24 20:42:37 LOG4 got_cormsg: From DATATAKING: set ra 101.89 2008-Apr-24 20:42:37 LOG4 got_cormsg: From DATATAKING: set dec 8.6426993974 2008-Apr-24 20:42:37 LOG4 got_cormsg: From DATATAKING: vw% 101.89 2008-Apr-24 20:42:37 LOG4 got_cormsg: From DATATAKING: 2008-Apr-24 20:42:37 LOG4 got_cormsg: From DATATAKING: vw% 8.6426993974 2008-Apr-24 20:42:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:42:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 20:42:37 LOG4 got_cormsg: From DATATAKING: pnt tr 101.89 8.6426993974 -CF 2008-Apr-24 20:42:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 20:42:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 20:42:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 20:42:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.118 2008-Apr-24 20:42:51 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-24 20:42:51 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-24 20:42:51 LOG4 lstwait: Finished waiting, the gui caused difference: 0.37218188000309738 2008-Apr-24 20:42:51 INFO3 lstwait: Finished waiting 2008-Apr-24 20:42:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 20:42:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-24 20:42:51 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 20:42:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-24 20:42:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-24 20:42:51 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-24 20:42:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 20:42:51 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-24 20:42:51 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-24 20:42:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-24 20:42:51 INFO2 take_spectra: Starting WAPP scan: 811500199 2008-Apr-24 20:42:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-24 20:42:51 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 20:42:51 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-24 20:42:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 20:42:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2572.00 2008-Apr-24 20:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115414 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 20:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 20:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 20:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115414 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 20:52:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.426 > 1.4)! 2008-Apr-24 20:52:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 1.093 1.062 0.947 2008-Apr-24 20:52:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 1.128 0.938 1.006 2008-Apr-24 20:52:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.426 1.206 0.996 0.889 2008-Apr-24 20:52:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.939 1.047 1.040 2008-Apr-24 20:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 1.477 (still bad) 2008-Apr-24 20:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 1.493 (still bad) 2008-Apr-24 20:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 1.478 (still bad) 2008-Apr-24 20:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 1.431 (still bad) 2008-Apr-24 20:52:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.364 2008-Apr-24 21:02:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 21:02:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 21:02:52 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-24 21:02:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 21:02:52 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-24 21:02:52 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-24 21:02:52 LOG5 finish_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-24 21:02:52 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-24 21:02:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 21:02:52 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-24 21:02:52 LOG5 end_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-24 21:02:52 COMMAND run_command_line: EXECUTING command 27: 'FIXEDDRIFT az=98.60 alfaangle=-75.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_160 ra=95300.00 dec=195430.00' 2008-Apr-24 21:02:52 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-24 21:02:53 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 21:02:53 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 98.60 -75.2 hcorcal 5 tracking no first 1 AGES3193_p1_160 95300.00 195430.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 21:02:53 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-24 21:02:53 LOG5 begin_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-24 21:02:53 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_158' 2008-Apr-24 21:02:53 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-24 21:02:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_160} 2008-Apr-24 21:02:53 INFO3 fixed_driftmap: Sending telescope to Az = 98.60 and ZA = 14.01 2008-Apr-24 21:02:53 LOG3 track_source: Calling 'track_source AGES3193_p1_160 98.60 14.0070920699 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 21:02:53 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 21:02:53 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-24 21:02:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_160} INFO {Slewing to source 'AGES3193_p1_160' ...} 2008-Apr-24 21:02:53 INFO1 track_source: Starting to track AGES3193_p1_160 2008-Apr-24 21:02:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_160" 2008-Apr-24 21:02:53 LOG3 vw_send: To DATATAKING: set ra 98.60 2008-Apr-24 21:02:53 LOG3 vw_send: To DATATAKING: set dec 14.0070920699 2008-Apr-24 21:02:53 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 21:02:53 LOG3 vw_send: To DATATAKING: pnt tr 98.60 14.0070920699 -CF 2008-Apr-24 21:02:53 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:02:53 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 21:02:53 LOG5 finish_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-24 21:02:53 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 21:02:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:02:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 21:02:53 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-24 21:02:53 START begin_task: Starting task 'rotate ALFA to -75.2 degrees' 2008-Apr-24 21:02:53 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-24 21:02:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -75.2 degrees ...} 2008-Apr-24 21:02:53 INFO2 rotate_alfa: ALFA commanded to -75.2 degrees 2008-Apr-24 21:02:53 LOG3 sock_errsend: To ALFAMOTOR: POSITION -75.2 REPLY 2008-Apr-24 21:02:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 21:02:53 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 21:02:53 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-24 21:02:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_160" 2008-Apr-24 21:02:53 LOG4 got_cormsg: From DATATAKING: set ra 98.60 2008-Apr-24 21:02:53 LOG4 got_cormsg: From DATATAKING: set dec 14.0070920699 2008-Apr-24 21:02:53 LOG4 got_cormsg: From DATATAKING: vw% 98.60 2008-Apr-24 21:02:53 LOG4 got_cormsg: From DATATAKING: vw% 14.0070920699 2008-Apr-24 21:02:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:02:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 21:02:53 LOG4 got_cormsg: From DATATAKING: pnt tr 98.60 14.0070920699 -CF 2008-Apr-24 21:02:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:02:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 21:02:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:02:58 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 21:02:58 INFO3 alfa_motor: ALFA rotator in-position -75.20 degrees 2008-Apr-24 21:02:58 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 21:02:58 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-24 21:02:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:02:58 STOP finish_task: Finishing task 'rotate ALFA to -75.2 degrees' 2008-Apr-24 21:02:58 LOG5 finish_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-24 21:02:58 INFO2 finish_task: DONE finished configuration: rotating ALFA to -75.2 degrees 2008-Apr-24 21:02:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:02:58 STOP end_task: Finishing task 'rotate ALFA to -75.2 degrees' with status 'OK' 2008-Apr-24 21:02:58 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-24 21:02:58 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 21:02:58 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-24 21:02:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 21:02:58 LOG3 waittrk: Start waittrk 5 2008-Apr-24 21:02:58 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 21:02:58 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-24 21:03:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 21:03:03 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-24 21:03:03 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 21:03:03 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-24 21:05:12 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 21:05:12 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-24 21:05:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:05:12 INFO2 waittrk: Now tracking AGES3193_p1_160 2008-Apr-24 21:05:12 LOG4 waittrk: Current telescope position: Az = 98.38 ZA = 14.01 2008-Apr-24 21:05:12 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 21:05:12 LOG5 finish_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-24 21:05:12 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 21:05:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:05:12 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 21:05:12 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-24 21:05:12 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 21:05:12 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-24 21:05:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 21:05:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 21:05:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:05:12 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 21:05:12 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-24 21:05:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 21:05:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:05:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:05:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 21:05:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 21:05:13 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-24 21:05:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 21:05:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 21:05:13 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 21:05:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 21:05:13 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-24 21:05:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:05:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 21:05:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 21:05:13 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-24 21:05:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 21:05:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 21:05:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 21:05:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 21:05:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 21:05:13 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-24 21:05:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 21:05:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 21:05:13 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-24 21:05:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 21:05:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 21:05:13 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 21:05:13 LOG5 finish_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-24 21:05:13 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 21:05:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:05:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 21:05:13 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-24 21:05:14 LOG5 dopset_later: Calling 'dopset_later 33.36786661566402' 2008-Apr-24 21:05:14 INFO3 dopset_later: Setting Doppler correction for 21:05:46 (33.4 seconds from now) 2008-Apr-24 21:05:14 LOG5 antvel: Calling 'antvel 98.600000 14.007092 F 33.36786661566402' 2008-Apr-24 21:05:14 LOG2 antvel: Parameters to Doppler: Heliocentric 90346 2008 115 0.0 2008-Apr-24 21:05:14 INFO5 antvel: Computed antenna velocity: +27.83047 km/s 2008-Apr-24 21:05:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.830466854800001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-24 21:05:14 INFO4 dopset_gen: New sky frequencies: 1381.115216 1381.115216 1381.115216 1381.115216 1381.115216 1381.115216 1381.115216 1381.115216 1381.115216 2008-Apr-24 21:05:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.115216 sky0=1381.115216 sky1=1381.115216 sky2=1381.115216 sky3=1381.115216 sky4=1381.115216 sky5=1381.115216 sky6=1381.115216 sky7=1381.115216 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 21:05:14 LOG2 dopset_gen: Result from 'sky2syn': 1631.115216 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 21:05:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631115216.0} 2008-Apr-24 21:05:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 21:05:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-24 21:05:14 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-24 21:05:14 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:30.7 Dec = +19:54:30.7 2008-Apr-24 21:05:14 LOG3 track_source: Calling 'track_source AGES3193_p1_160 095230.7 195430.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 21:05:14 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 21:05:14 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-24 21:05:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_160} INFO {Slewing to source 'AGES3193_p1_160' ...} 2008-Apr-24 21:05:14 INFO1 track_source: Starting to track AGES3193_p1_160 2008-Apr-24 21:05:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_160" 2008-Apr-24 21:05:14 LOG3 vw_send: To DATATAKING: set ra 095230.7 2008-Apr-24 21:05:14 LOG3 vw_send: To DATATAKING: set dec 195430.7 2008-Apr-24 21:05:14 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 21:05:14 LOG3 vw_send: To DATATAKING: pnt tr 095230.7 195430.7 -CJ 2008-Apr-24 21:05:14 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:05:14 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 21:05:14 LOG5 finish_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-24 21:05:14 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 21:05:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:05:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 21:05:14 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-24 21:05:14 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 21:05:14 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-24 21:05:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 21:05:14 LOG3 waittrk: Start waittrk 5 2008-Apr-24 21:05:14 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 21:05:14 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631115216.0} 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_160" 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: set ra 095230.7 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: set dec 195430.7 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 095230.7 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: vw% 195430.7 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: pnt tr 095230.7 195430.7 -CJ 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 21:05:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:05:19 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 21:05:19 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-24 21:05:19 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 21:05:19 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-24 21:05:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 21:05:21 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-24 21:05:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:05:21 INFO2 waittrk: Now tracking AGES3193_p1_160 2008-Apr-24 21:05:21 LOG4 waittrk: Current telescope position: Az = 98.37 ZA = 14.03 2008-Apr-24 21:05:21 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 21:05:21 LOG5 finish_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-24 21:05:21 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 21:05:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:05:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 21:05:21 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-24 21:05:21 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 21:05:21 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-24 21:05:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 21:05:21 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 21:05:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 21:05:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 21:05:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:05:21 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 21:05:21 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-24 21:05:21 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 21:05:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:05:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:05:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 21:05:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 21:05:21 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-24 21:05:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 21:05:22 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 21:05:22 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-24 21:05:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 21:05:22 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 21:05:22 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 21:05:22 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 21:05:22 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 21:05:22 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 21:05:22 LOG5 begin_task: Level: (5) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-24 21:05:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 21:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:05:22 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 7 6 dB 2008-Apr-24 21:05:22 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-24 21:05:22 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-24 21:05:22 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-24 21:05:22 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 21:05:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 21:05:22 LOG5 end_task: Level: (5) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-24 21:05:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.963 1.104 ALFA beam 1: 1.094 0.974 2008-Apr-24 21:05:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.009 0.891 ALFA beam 3: 0.964 1.031 2008-Apr-24 21:05:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.906 0.964 ALFA beam 5: 1.063 0.946 2008-Apr-24 21:05:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.999 0.978 ALFA beam 7: 1.094 1.084 2008-Apr-24 21:05:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 21:05:22 LOG5 finish_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-24 21:05:22 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 21:05:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:05:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 21:05:22 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-24 21:05:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 21:05:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 21:05:22 LOG5 finish_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-24 21:05:22 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 21:05:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:05:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 21:05:22 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-24 21:05:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 21:05:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 21:05:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 21:05:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 21:05:22 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-24 21:05:22 START begin_task: Starting task 'WAPP calibration' 2008-Apr-24 21:05:22 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-24 21:05:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-24 21:05:23 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-24 21:05:23 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 21:05:23 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-24 21:05:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 21:05:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 21:05:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:05:23 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 21:05:23 LOG5 begin_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-24 21:05:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 21:05:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 21:05:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:05:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:05:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 21:05:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 21:05:23 LOG5 end_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-24 21:05:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 21:05:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 21:05:23 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 21:05:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 21:05:23 LOG5 begin_task: Level: (5) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-24 21:05:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:05:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 21:05:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 21:05:23 LOG5 end_task: Level: (5) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-24 21:05:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 21:05:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 21:05:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 21:05:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 21:05:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 21:05:23 LOG5 begin_task: Level: (5) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-24 21:05:23 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0006.fits 2008-Apr-24 21:05:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 21:05:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 21:05:23 LOG5 end_task: Level: (5) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-24 21:05:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 21:05:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 21:05:23 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 21:05:23 LOG5 finish_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-24 21:05:23 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-24 21:05:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:05:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 21:05:23 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-24 21:05:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-24 21:05:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 21:05:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 21:05:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 21:05:23 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-24 21:05:23 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080424.a2048.0006.fits} 2008-Apr-24 21:05:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 21:05:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 21:05:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 21:05:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 21:05:23 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-24 21:05:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-24 21:05:23 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-24 21:05:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 21:05:23 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-24 21:05:23 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 21:05:23 LOG5 log_alfabeam: Parameters: 9.8751944444444444 19.908527777777781 10.867660 2008.3172586952112 -75.200050 2008-Apr-24 21:05:23 LOG4 log_alfabeam: ALFABEAM 0 9.875194444444453 19.908527777777778 2008-Apr-24 21:05:23 LOG4 log_alfabeam: ALFABEAM 1 9.873638983425215 19.998511002322800 2008-Apr-24 21:05:23 LOG4 log_alfabeam: ALFABEAM 2 9.868005213192047 19.938627555939060 2008-Apr-24 21:05:23 LOG4 log_alfabeam: ALFABEAM 3 9.869590090370826 19.848293865857240 2008-Apr-24 21:05:23 LOG4 log_alfabeam: ALFABEAM 4 9.876788134067056 19.818850088990374 2008-Apr-24 21:05:23 LOG4 log_alfabeam: ALFABEAM 5 9.882385186215851 19.878696092326084 2008-Apr-24 21:05:23 LOG4 log_alfabeam: ALFABEAM 6 9.880820710320766 19.968023746058673 2008-Apr-24 21:05:23 INFO2 take_spectra: Starting WAPP scan: 811500200 2008-Apr-24 21:05:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 21:05:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 21:05:24 LOG5 begin_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-24 21:05:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 21:05:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3925.00 2008-Apr-24 21:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115216 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 21:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 21:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:05:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.519 > 1.4)! 2008-Apr-24 21:05:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.104 1.094 0.974 2008-Apr-24 21:05:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.372 1.274 1.330 1.409 2008-Apr-24 21:05:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.256 1.327 1.449 1.244 2008-Apr-24 21:05:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.387 1.363 1.519 1.509 2008-Apr-24 21:05:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 21:05:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 21:05:30 LOG5 end_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-24 21:05:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 21:05:30 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-24 21:05:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 21:05:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 21:05:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 21:05:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 21:05:30 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-24 21:05:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 21:05:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 21:05:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 21:05:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 21:05:30 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-24 21:05:31 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-24 21:05:31 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-24 21:05:31 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 21:05:31 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-24 21:05:31 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 21:05:31 LOG5 log_alfabeam: Parameters: 9.8751944444444444 19.908527777777781 10.869610 2008.3172589170279 -75.200050 2008-Apr-24 21:05:31 LOG4 log_alfabeam: ALFABEAM 0 9.875194444444444 19.908527777777778 2008-Apr-24 21:05:31 LOG4 log_alfabeam: ALFABEAM 1 9.873637039666875 19.998504147145841 2008-Apr-24 21:05:31 LOG4 log_alfabeam: ALFABEAM 2 9.868004573546202 19.938596990295185 2008-Apr-24 21:05:31 LOG4 log_alfabeam: ALFABEAM 3 9.869591345493186 19.848271014773548 2008-Apr-24 21:05:31 LOG4 log_alfabeam: ALFABEAM 4 9.876789987954922 19.818856477203955 2008-Apr-24 21:05:31 LOG4 log_alfabeam: ALFABEAM 5 9.882385812737438 19.878725987269156 2008-Apr-24 21:05:31 LOG4 log_alfabeam: ALFABEAM 6 9.880819434747085 19.968048108428576 2008-Apr-24 21:05:31 INFO2 take_spectra: Starting WAPP scan: 811500201 2008-Apr-24 21:05:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 21:05:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 21:05:31 LOG5 begin_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-24 21:05:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 21:05:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3932.00 2008-Apr-24 21:05:36 INFO5 check_wapp_levels: WAPP power levels are between 1.244 and 1.519 (still bad) 2008-Apr-24 21:05:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115216 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 21:05:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:05:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:05:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 21:05:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:05:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:05:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:05:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:05:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:05:37 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-24 21:05:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 21:05:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 21:05:37 LOG5 end_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-24 21:05:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 21:05:37 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-24 21:05:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 21:05:37 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-24 21:05:37 LOG5 finish_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-24 21:05:37 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-24 21:05:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:05:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-24 21:05:37 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-24 21:05:37 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-24 21:05:38 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 98.60 and ZA = 14.01 2008-Apr-24 21:05:38 LOG3 track_source: Calling 'track_source AGES3193_p1_160 98.60 14.0070920699 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 21:05:38 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 21:05:38 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-24 21:05:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_160} INFO {Slewing to source 'AGES3193_p1_160' ...} 2008-Apr-24 21:05:38 INFO1 track_source: Starting to track AGES3193_p1_160 2008-Apr-24 21:05:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_160" 2008-Apr-24 21:05:38 LOG3 vw_send: To DATATAKING: set ra 98.60 2008-Apr-24 21:05:38 LOG3 vw_send: To DATATAKING: set dec 14.0070920699 2008-Apr-24 21:05:38 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 21:05:38 LOG3 vw_send: To DATATAKING: pnt tr 98.60 14.0070920699 -CF 2008-Apr-24 21:05:38 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:05:38 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 21:05:38 LOG5 finish_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-24 21:05:38 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 21:05:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:05:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 21:05:38 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-24 21:05:38 LOG1 fixed_driftmap: Parameters: HA = +00:58:58.1 Start = 10:52:27.0 LST = 10:52:17.6 diff = 9.4 secs 2008-Apr-24 21:05:38 INFO2 fixed_driftmap: Waiting 7.4 seconds for RA 9:53:29 2008-Apr-24 21:05:38 INFO2 lstwait: Waiting for 7.4 secs from LST 10:52:18 to LST 10:52:25 ... 2008-Apr-24 21:05:38 LOG4 send_obs_status: To obs_status: <1> TASKTIME 7.3730372220603355 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 21:05:38 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-24 21:05:38 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-24 21:05:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_160" 2008-Apr-24 21:05:38 LOG4 got_cormsg: From DATATAKING: set ra 98.60 2008-Apr-24 21:05:38 LOG4 got_cormsg: From DATATAKING: set dec 14.0070920699 2008-Apr-24 21:05:38 LOG4 got_cormsg: From DATATAKING: vw% 98.60 2008-Apr-24 21:05:38 LOG4 got_cormsg: From DATATAKING: vw% 14.0070920699 2008-Apr-24 21:05:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:05:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 21:05:38 LOG4 got_cormsg: From DATATAKING: pnt tr 98.60 14.0070920699 -CF 2008-Apr-24 21:05:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:05:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 21:05:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:05:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.904 and 1.102 2008-Apr-24 21:05:45 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-24 21:05:45 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-24 21:05:45 LOG4 lstwait: Finished waiting, the gui caused difference: 0.62757631999943442 2008-Apr-24 21:05:45 INFO3 lstwait: Finished waiting 2008-Apr-24 21:05:45 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:05:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-24 21:05:45 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 21:05:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-24 21:05:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-24 21:05:45 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-24 21:05:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 21:05:45 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-24 21:05:45 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-24 21:05:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-24 21:05:45 INFO2 take_spectra: Starting WAPP scan: 811500202 2008-Apr-24 21:05:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-24 21:05:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 21:05:46 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-24 21:05:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 21:05:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3947.00 2008-Apr-24 21:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.115216 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 21:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 21:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.115216 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:05:48 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Apr-24 21:05:50 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Apr-24 21:25:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 21:25:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 21:25:47 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-24 21:25:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 21:25:47 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-24 21:25:47 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-24 21:25:47 LOG5 finish_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-24 21:25:47 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-24 21:25:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 21:25:47 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-24 21:25:47 LOG5 end_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-24 21:25:47 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=311.98 alfaangle=60.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_049 ra=120900.00 dec=74800.00' 2008-Apr-24 21:25:47 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-24 21:25:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 21:25:48 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 311.98 60.1 hcorcal 5 tracking no first 1 AGESVC1A_p2_049 120900.00 74800.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 21:25:48 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-24 21:25:48 LOG5 begin_task: Level: (2) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-24 21:25:48 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p1_160' 2008-Apr-24 21:25:48 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-24 21:25:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_049} 2008-Apr-24 21:25:48 INFO3 fixed_driftmap: Sending telescope to Az = 311.98 and ZA = 15.41 2008-Apr-24 21:25:48 LOG3 track_source: Calling 'track_source AGESVC1A_p2_049 311.98 15.4097083206 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 21:25:48 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 21:25:48 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-24 21:25:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_049} INFO {Slewing to source 'AGESVC1A_p2_049' ...} 2008-Apr-24 21:25:48 INFO1 track_source: Starting to track AGESVC1A_p2_049 2008-Apr-24 21:25:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_049" 2008-Apr-24 21:25:48 LOG3 vw_send: To DATATAKING: set ra 311.98 2008-Apr-24 21:25:48 LOG3 vw_send: To DATATAKING: set dec 15.4097083206 2008-Apr-24 21:25:48 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 21:25:48 LOG3 vw_send: To DATATAKING: pnt tr 311.98 15.4097083206 -CF 2008-Apr-24 21:25:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:25:48 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 21:25:48 LOG5 finish_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-24 21:25:48 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 21:25:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:25:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 21:25:48 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-24 21:25:48 START begin_task: Starting task 'rotate ALFA to +60.1 degrees' 2008-Apr-24 21:25:48 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-24 21:25:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +60.1 degrees ...} 2008-Apr-24 21:25:48 INFO2 rotate_alfa: ALFA commanded to +60.1 degrees 2008-Apr-24 21:25:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION 60.1 REPLY 2008-Apr-24 21:25:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 21:25:48 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 21:25:48 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-24 21:25:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_049" 2008-Apr-24 21:25:48 LOG4 got_cormsg: From DATATAKING: set ra 311.98 2008-Apr-24 21:25:48 LOG4 got_cormsg: From DATATAKING: set dec 15.4097083206 2008-Apr-24 21:25:48 LOG4 got_cormsg: From DATATAKING: vw% 311.98 2008-Apr-24 21:25:48 LOG4 got_cormsg: From DATATAKING: vw% 15.4097083206 2008-Apr-24 21:25:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:25:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 21:25:48 LOG4 got_cormsg: From DATATAKING: pnt tr 311.98 15.4097083206 -CF 2008-Apr-24 21:25:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:25:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 21:25:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:27:04 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 21:27:04 INFO3 alfa_motor: ALFA rotator in-position +60.10 degrees 2008-Apr-24 21:27:04 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 21:27:04 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-24 21:27:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:27:04 STOP finish_task: Finishing task 'rotate ALFA to +60.1 degrees' 2008-Apr-24 21:27:04 LOG5 finish_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-24 21:27:04 INFO2 finish_task: DONE finished configuration: rotating ALFA to +60.1 degrees 2008-Apr-24 21:27:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:27:04 STOP end_task: Finishing task 'rotate ALFA to +60.1 degrees' with status 'OK' 2008-Apr-24 21:27:04 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-24 21:27:04 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 21:27:04 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-24 21:27:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 21:27:04 LOG3 waittrk: Start waittrk 5 2008-Apr-24 21:27:04 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 21:27:04 LOG5 begin_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-24 21:27:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 21:27:09 LOG5 end_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-24 21:27:09 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 21:27:09 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-24 21:34:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 21:34:36 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-24 21:34:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:34:36 INFO2 waittrk: Now tracking AGESVC1A_p2_049 2008-Apr-24 21:34:36 LOG4 waittrk: Current telescope position: Az = 311.60 ZA = 15.40 2008-Apr-24 21:34:36 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 21:34:36 LOG5 finish_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-24 21:34:36 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 21:34:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:34:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 21:34:36 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-24 21:34:36 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 21:34:36 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-24 21:34:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 21:34:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 21:34:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:34:36 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 21:34:36 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-24 21:34:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 21:34:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:34:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:34:38 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 21:34:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 21:34:38 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-24 21:34:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 21:34:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 21:34:38 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 21:34:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 21:34:38 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-24 21:34:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:34:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 21:34:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 21:34:39 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-24 21:34:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 21:34:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 21:34:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 21:34:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 21:34:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 21:34:39 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-24 21:34:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 21:34:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 21:34:39 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-24 21:34:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 21:34:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 21:34:39 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 21:34:39 LOG5 finish_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-24 21:34:39 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 21:34:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:34:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 21:34:39 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-24 21:34:39 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-24 21:34:39 INFO2 astwait: Waiting for 63 seconds from 01:34:39 to 01:35:42 UTC ... 2008-Apr-24 21:34:39 LOG4 send_obs_status: To obs_status: <1> TASKTIME 63 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 21:34:39 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-24 21:34:39 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-24 21:35:42 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-24 21:35:42 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-24 21:35:42 INFO3 astwait: Finished waiting 2008-Apr-24 21:35:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:35:42 LOG5 dopset_later: Calling 'dopset_later 60.682931129880849' 2008-Apr-24 21:35:42 INFO3 dopset_later: Setting Doppler correction for 21:36:42 (60.7 seconds from now) 2008-Apr-24 21:35:42 LOG5 antvel: Calling 'antvel 311.980000 15.409708 F 60.682931129880849' 2008-Apr-24 21:35:42 LOG2 antvel: Parameters to Doppler: Heliocentric 92202 2008 115 0.0 2008-Apr-24 21:35:42 INFO5 antvel: Computed antenna velocity: +16.82853 km/s 2008-Apr-24 21:35:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=16.828533393400001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-24 21:35:42 INFO4 dopset_gen: New sky frequencies: 1381.165898 1381.165898 1381.165898 1381.165898 1381.165898 1381.165898 1381.165898 1381.165898 1381.165898 2008-Apr-24 21:35:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.165898 sky0=1381.165898 sky1=1381.165898 sky2=1381.165898 sky3=1381.165898 sky4=1381.165898 sky5=1381.165898 sky6=1381.165898 sky7=1381.165898 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 21:35:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.165898 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 21:35:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631165898.0} 2008-Apr-24 21:35:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 21:35:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-24 21:35:42 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-24 21:35:42 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.8 Dec = +07:47:51.2 2008-Apr-24 21:35:42 LOG3 track_source: Calling 'track_source AGESVC1A_p2_049 120803.8 074751.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 21:35:42 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 21:35:42 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-24 21:35:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_049} INFO {Slewing to source 'AGESVC1A_p2_049' ...} 2008-Apr-24 21:35:42 INFO1 track_source: Starting to track AGESVC1A_p2_049 2008-Apr-24 21:35:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_049" 2008-Apr-24 21:35:42 LOG3 vw_send: To DATATAKING: set ra 120803.8 2008-Apr-24 21:35:42 LOG3 vw_send: To DATATAKING: set dec 074751.2 2008-Apr-24 21:35:42 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 21:35:42 LOG3 vw_send: To DATATAKING: pnt tr 120803.8 074751.2 -CJ 2008-Apr-24 21:35:42 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:35:42 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 21:35:42 LOG5 finish_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-24 21:35:42 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 21:35:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:35:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 21:35:42 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-24 21:35:42 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 21:35:42 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-24 21:35:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 21:35:42 LOG3 waittrk: Start waittrk 5 2008-Apr-24 21:35:42 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 21:35:42 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631165898.0} 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_049" 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: set ra 120803.8 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: set dec 074751.2 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: vw% 120803.8 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: vw% 074751.2 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.8 074751.2 -CJ 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 21:35:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:35:47 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 21:35:47 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-24 21:35:47 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 21:35:47 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-24 21:35:49 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 21:35:49 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-24 21:35:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:35:49 INFO2 waittrk: Now tracking AGESVC1A_p2_049 2008-Apr-24 21:35:49 LOG4 waittrk: Current telescope position: Az = 311.65 ZA = 15.39 2008-Apr-24 21:35:49 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 21:35:49 LOG5 finish_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-24 21:35:49 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 21:35:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:35:49 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 21:35:49 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-24 21:35:49 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 21:35:49 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-24 21:35:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 21:35:49 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 21:35:49 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 21:35:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 21:35:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:35:49 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 21:35:49 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-24 21:35:49 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 21:35:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:35:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:35:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 21:35:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 21:35:50 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-24 21:35:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 21:35:50 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 21:35:50 LOG5 begin_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-24 21:35:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 21:35:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 21:35:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 21:35:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 21:35:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 21:35:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 21:35:50 LOG5 begin_task: Level: (5) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-24 21:35:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:35:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 21:35:50 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 7 6 dB 2008-Apr-24 21:35:50 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-24 21:35:50 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-24 21:35:50 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-24 21:35:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 21:35:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 21:35:50 LOG5 end_task: Level: (5) ID = <10322> Status = 0 0 0 0 ok 2008-Apr-24 21:35:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.942 1.120 ALFA beam 1: 1.121 1.059 2008-Apr-24 21:35:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.070 0.977 ALFA beam 3: 1.016 1.061 2008-Apr-24 21:35:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.946 0.978 ALFA beam 5: 1.031 0.933 2008-Apr-24 21:35:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.983 1.013 ALFA beam 7: 1.078 0.898 2008-Apr-24 21:35:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 21:35:50 LOG5 finish_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-24 21:35:50 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 21:35:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:35:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 21:35:50 LOG5 end_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-24 21:35:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 21:35:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 21:35:50 LOG5 finish_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-24 21:35:50 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 21:35:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:35:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 21:35:50 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-24 21:35:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 21:35:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 21:35:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 21:35:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 21:35:51 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-24 21:35:51 START begin_task: Starting task 'WAPP calibration' 2008-Apr-24 21:35:51 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-24 21:35:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-24 21:35:51 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-24 21:35:51 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 21:35:51 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-24 21:35:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 21:35:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 21:35:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:35:51 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 21:35:51 LOG5 begin_task: Level: (5) ID = <10325> Status = 0 0 0 0 ok 2008-Apr-24 21:35:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 21:35:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 21:35:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:35:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:35:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 21:35:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 21:35:51 LOG5 end_task: Level: (5) ID = <10325> Status = 0 0 0 0 ok 2008-Apr-24 21:35:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 21:35:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 21:35:51 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 21:35:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 21:35:51 LOG5 begin_task: Level: (5) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-24 21:35:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:35:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 21:35:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 21:35:51 LOG5 end_task: Level: (5) ID = <10326> Status = 0 0 0 0 ok 2008-Apr-24 21:35:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 21:35:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 21:35:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 21:35:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 21:35:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 21:35:51 LOG5 begin_task: Level: (5) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-24 21:35:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0007.fits 2008-Apr-24 21:35:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 21:35:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 21:35:51 LOG5 end_task: Level: (5) ID = <10327> Status = 0 0 0 0 ok 2008-Apr-24 21:35:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 21:35:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 21:35:51 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 21:35:51 LOG5 finish_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-24 21:35:51 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-24 21:35:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:35:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 21:35:51 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Apr-24 21:35:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-24 21:35:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 21:35:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 21:35:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 21:35:51 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2008-Apr-24 21:35:51 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080424.a2048.0007.fits} 2008-Apr-24 21:35:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 21:35:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 21:35:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 21:35:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 21:35:51 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2008-Apr-24 21:35:51 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-24 21:35:51 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-24 21:35:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 21:35:51 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-24 21:35:51 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 21:35:51 LOG5 log_alfabeam: Parameters: 12.134388888888889 7.7975555555555545 11.376828 2008.3173166210358 60.099998 2008-Apr-24 21:35:51 LOG4 log_alfabeam: ALFABEAM 0 12.134388888888886 7.797555555555560 2008-Apr-24 21:35:51 LOG4 log_alfabeam: ALFABEAM 1 12.132124696937655 7.894887179138361 2008-Apr-24 21:35:51 LOG4 log_alfabeam: ALFABEAM 2 12.127817324064255 7.830381847160955 2008-Apr-24 21:35:51 LOG4 log_alfabeam: ALFABEAM 3 12.130044196293637 7.732862285216571 2008-Apr-24 21:35:51 LOG4 log_alfabeam: ALFABEAM 4 12.136620277841644 7.699933383387481 2008-Apr-24 21:35:51 LOG4 log_alfabeam: ALFABEAM 5 12.140978404942940 7.765178976952765 2008-Apr-24 21:35:51 LOG4 log_alfabeam: ALFABEAM 6 12.138709673799749 7.862612897814739 2008-Apr-24 21:35:51 INFO2 take_spectra: Starting WAPP scan: 811500203 2008-Apr-24 21:35:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 21:35:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 21:35:52 LOG5 begin_task: Level: (5) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-24 21:35:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 21:35:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5753.00 2008-Apr-24 21:35:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165898 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 21:35:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:35:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:35:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 21:35:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:35:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.509 > 1.4)! 2008-Apr-24 21:35:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.296 1.418 1.509 1.423 2008-Apr-24 21:35:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.977 1.016 1.061 2008-Apr-24 21:35:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.946 0.978 1.031 0.933 2008-Apr-24 21:35:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.983 1.013 1.078 0.898 2008-Apr-24 21:35:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:35:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:35:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:35:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:35:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 21:35:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 21:35:58 LOG5 end_task: Level: (5) ID = <10330> Status = 0 0 0 0 ok 2008-Apr-24 21:35:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 21:35:58 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2008-Apr-24 21:35:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 21:35:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 21:35:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 21:35:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 21:35:58 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-24 21:35:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 21:35:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 21:35:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 21:35:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 21:35:58 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2008-Apr-24 21:35:59 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-24 21:35:59 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-24 21:35:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 21:35:59 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-24 21:35:59 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 21:35:59 LOG5 log_alfabeam: Parameters: 12.134388888888889 7.7975555555555545 11.378778 2008.3173168428525 60.099998 2008-Apr-24 21:35:59 LOG4 log_alfabeam: ALFABEAM 0 12.134388888888884 7.797555555555566 2008-Apr-24 21:35:59 LOG4 log_alfabeam: ALFABEAM 1 12.132132699772249 7.894928116519782 2008-Apr-24 21:35:59 LOG4 log_alfabeam: ALFABEAM 2 12.127820047113065 7.830501771614094 2008-Apr-24 21:35:59 LOG4 log_alfabeam: ALFABEAM 3 12.130038850524326 7.732941681460218 2008-Apr-24 21:35:59 LOG4 log_alfabeam: ALFABEAM 4 12.136612209895290 7.699892639021423 2008-Apr-24 21:35:59 LOG4 log_alfabeam: ALFABEAM 5 12.140975744238046 7.765059389884369 2008-Apr-24 21:35:59 LOG4 log_alfabeam: ALFABEAM 6 12.138715014943523 7.862534463332809 2008-Apr-24 21:35:59 INFO2 take_spectra: Starting WAPP scan: 811500204 2008-Apr-24 21:35:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 21:35:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 21:35:59 LOG5 begin_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-24 21:35:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 21:35:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5760.00 2008-Apr-24 21:36:04 INFO5 check_wapp_levels: WAPP power levels are between 1.231 and 1.510 (still bad) 2008-Apr-24 21:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165898 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 21:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 21:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:36:05 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-24 21:36:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 21:36:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 21:36:05 LOG5 end_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2008-Apr-24 21:36:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 21:36:05 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Apr-24 21:36:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 21:36:05 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-24 21:36:05 LOG5 finish_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-24 21:36:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-24 21:36:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:36:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-24 21:36:05 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2008-Apr-24 21:36:05 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-24 21:36:06 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 311.98 and ZA = 15.41 2008-Apr-24 21:36:06 LOG3 track_source: Calling 'track_source AGESVC1A_p2_049 311.98 15.4097083206 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 21:36:06 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 21:36:06 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-24 21:36:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_049} INFO {Slewing to source 'AGESVC1A_p2_049' ...} 2008-Apr-24 21:36:06 INFO1 track_source: Starting to track AGESVC1A_p2_049 2008-Apr-24 21:36:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_049" 2008-Apr-24 21:36:06 LOG3 vw_send: To DATATAKING: set ra 311.98 2008-Apr-24 21:36:06 LOG3 vw_send: To DATATAKING: set dec 15.4097083206 2008-Apr-24 21:36:06 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 21:36:06 LOG3 vw_send: To DATATAKING: pnt tr 311.98 15.4097083206 -CF 2008-Apr-24 21:36:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:36:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 21:36:06 LOG5 finish_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-24 21:36:06 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 21:36:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:36:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 21:36:06 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2008-Apr-24 21:36:06 LOG1 fixed_driftmap: Parameters: HA = -00:45:59.8 Start = 11:23:27.4 LST = 11:22:50.6 diff = 36.8 secs 2008-Apr-24 21:36:06 INFO2 fixed_driftmap: Waiting 34.8 seconds for RA 12:09:27 2008-Apr-24 21:36:06 INFO2 lstwait: Waiting for 34.7 secs from LST 11:22:51 to LST 11:23:25 ... 2008-Apr-24 21:36:06 LOG4 send_obs_status: To obs_status: <1> TASKTIME 34.688101736283542 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 21:36:06 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-24 21:36:06 LOG5 begin_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2008-Apr-24 21:36:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_049" 2008-Apr-24 21:36:06 LOG4 got_cormsg: From DATATAKING: set ra 311.98 2008-Apr-24 21:36:06 LOG4 got_cormsg: From DATATAKING: set dec 15.4097083206 2008-Apr-24 21:36:06 LOG4 got_cormsg: From DATATAKING: vw% 311.98 2008-Apr-24 21:36:06 LOG4 got_cormsg: From DATATAKING: vw% 15.4097083206 2008-Apr-24 21:36:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:36:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 21:36:06 LOG4 got_cormsg: From DATATAKING: pnt tr 311.98 15.4097083206 -CF 2008-Apr-24 21:36:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:36:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 21:36:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:36:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.121 2008-Apr-24 21:36:41 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-24 21:36:41 LOG5 end_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2008-Apr-24 21:36:41 LOG4 lstwait: Finished waiting, the gui caused difference: 0.31332655999989356 2008-Apr-24 21:36:41 INFO3 lstwait: Finished waiting 2008-Apr-24 21:36:41 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:36:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-24 21:36:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 21:36:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-24 21:36:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-24 21:36:41 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-24 21:36:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 21:36:41 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-24 21:36:41 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-24 21:36:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-24 21:36:41 INFO2 take_spectra: Starting WAPP scan: 811500205 2008-Apr-24 21:36:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-24 21:36:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 21:36:41 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-24 21:36:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 21:36:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5802.00 2008-Apr-24 21:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165898 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 21:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 21:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165898 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:56:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 21:56:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 21:56:42 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2008-Apr-24 21:56:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 21:56:42 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Apr-24 21:56:42 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-24 21:56:42 LOG5 finish_task: Level: (2) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-24 21:56:42 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-24 21:56:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 21:56:42 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-24 21:56:42 LOG5 end_task: Level: (2) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-24 21:56:42 COMMAND run_command_line: EXECUTING command 35: 'FIXEDDRIFT az=331.56 alfaangle=42.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_051 ra=120900.00 dec=74500.00' 2008-Apr-24 21:56:42 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-24 21:56:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 21:56:43 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 331.56 42.8 hcorcal 5 tracking no first 1 AGESVC1A_p2_051 120900.00 74500.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 21:56:43 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-24 21:56:43 LOG5 begin_task: Level: (2) ID = <10338> Status = 0 0 0 0 ok 2008-Apr-24 21:56:43 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_049' 2008-Apr-24 21:56:43 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-24 21:56:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_051} 2008-Apr-24 21:56:43 INFO3 fixed_driftmap: Sending telescope to Az = 331.56 and ZA = 12.03 2008-Apr-24 21:56:43 LOG3 track_source: Calling 'track_source AGESVC1A_p2_051 331.56 12.0308325875 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 21:56:43 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 21:56:43 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Apr-24 21:56:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_051} INFO {Slewing to source 'AGESVC1A_p2_051' ...} 2008-Apr-24 21:56:43 INFO1 track_source: Starting to track AGESVC1A_p2_051 2008-Apr-24 21:56:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_051" 2008-Apr-24 21:56:43 LOG3 vw_send: To DATATAKING: set ra 331.56 2008-Apr-24 21:56:43 LOG3 vw_send: To DATATAKING: set dec 12.0308325875 2008-Apr-24 21:56:43 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 21:56:43 LOG3 vw_send: To DATATAKING: pnt tr 331.56 12.0308325875 -CF 2008-Apr-24 21:56:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:56:43 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 21:56:43 LOG5 finish_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Apr-24 21:56:43 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 21:56:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:56:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 21:56:43 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Apr-24 21:56:43 START begin_task: Starting task 'rotate ALFA to +42.8 degrees' 2008-Apr-24 21:56:43 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2008-Apr-24 21:56:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +42.8 degrees ...} 2008-Apr-24 21:56:43 INFO2 rotate_alfa: ALFA commanded to +42.8 degrees 2008-Apr-24 21:56:43 LOG3 sock_errsend: To ALFAMOTOR: POSITION 42.8 REPLY 2008-Apr-24 21:56:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 21:56:43 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 21:56:43 LOG5 begin_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-24 21:56:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_051" 2008-Apr-24 21:56:43 LOG4 got_cormsg: From DATATAKING: set ra 331.56 2008-Apr-24 21:56:43 LOG4 got_cormsg: From DATATAKING: set dec 12.0308325875 2008-Apr-24 21:56:43 LOG4 got_cormsg: From DATATAKING: vw% 331.56 2008-Apr-24 21:56:43 LOG4 got_cormsg: From DATATAKING: vw% 12.0308325875 2008-Apr-24 21:56:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:56:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 21:56:43 LOG4 got_cormsg: From DATATAKING: pnt tr 331.56 12.0308325875 -CF 2008-Apr-24 21:56:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:56:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 21:56:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:56:54 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 21:56:54 INFO3 alfa_motor: ALFA rotator in-position +42.80 degrees 2008-Apr-24 21:56:54 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 21:56:54 LOG5 end_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2008-Apr-24 21:56:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:56:54 STOP finish_task: Finishing task 'rotate ALFA to +42.8 degrees' 2008-Apr-24 21:56:54 LOG5 finish_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2008-Apr-24 21:56:54 INFO2 finish_task: DONE finished configuration: rotating ALFA to +42.8 degrees 2008-Apr-24 21:56:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:56:54 STOP end_task: Finishing task 'rotate ALFA to +42.8 degrees' with status 'OK' 2008-Apr-24 21:56:54 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2008-Apr-24 21:56:54 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 21:56:54 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-24 21:56:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 21:56:54 LOG3 waittrk: Start waittrk 5 2008-Apr-24 21:56:54 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 21:56:54 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-24 21:57:00 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 21:57:00 LOG5 end_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2008-Apr-24 21:57:00 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 21:57:00 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Apr-24 21:58:14 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 21:58:14 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Apr-24 21:58:14 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:58:14 INFO2 waittrk: Now tracking AGESVC1A_p2_051 2008-Apr-24 21:58:14 LOG4 waittrk: Current telescope position: Az = 331.18 ZA = 12.01 2008-Apr-24 21:58:14 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 21:58:14 LOG5 finish_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-24 21:58:14 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 21:58:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:58:14 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 21:58:14 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Apr-24 21:58:14 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 21:58:14 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-24 21:58:14 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 21:58:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 21:58:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:58:14 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 21:58:14 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Apr-24 21:58:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 21:58:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:58:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:58:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 21:58:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 21:58:16 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Apr-24 21:58:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 21:58:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 21:58:16 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 21:58:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 21:58:16 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Apr-24 21:58:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:58:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 21:58:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 21:58:16 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Apr-24 21:58:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 21:58:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 21:58:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 21:58:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 21:58:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 21:58:16 LOG5 begin_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-24 21:58:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 21:58:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 21:58:16 LOG5 end_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2008-Apr-24 21:58:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 21:58:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 21:58:16 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 21:58:16 LOG5 finish_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-24 21:58:16 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 21:58:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:58:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 21:58:16 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Apr-24 21:58:16 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-24 21:58:16 INFO2 astwait: Waiting for 22 seconds from 01:58:16 to 01:58:38 UTC ... 2008-Apr-24 21:58:16 LOG4 send_obs_status: To obs_status: <1> TASKTIME 22 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 21:58:16 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-24 21:58:16 LOG5 begin_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2008-Apr-24 21:58:38 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-24 21:58:38 LOG5 end_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2008-Apr-24 21:58:38 INFO3 astwait: Finished waiting 2008-Apr-24 21:58:38 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:58:38 LOG5 dopset_later: Calling 'dopset_later 60.938779967613506' 2008-Apr-24 21:58:38 INFO3 dopset_later: Setting Doppler correction for 21:59:38 (60.9 seconds from now) 2008-Apr-24 21:58:38 LOG5 antvel: Calling 'antvel 331.560000 12.030833 F 60.938779967613506' 2008-Apr-24 21:58:38 LOG2 antvel: Parameters to Doppler: Heliocentric 93578 2008 115 0.0 2008-Apr-24 21:58:38 INFO5 antvel: Computed antenna velocity: +16.87181 km/s 2008-Apr-24 21:58:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=16.871806259100001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-24 21:58:38 INFO4 dopset_gen: New sky frequencies: 1381.165699 1381.165699 1381.165699 1381.165699 1381.165699 1381.165699 1381.165699 1381.165699 1381.165699 2008-Apr-24 21:58:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.165699 sky0=1381.165699 sky1=1381.165699 sky2=1381.165699 sky3=1381.165699 sky4=1381.165699 sky5=1381.165699 sky6=1381.165699 sky7=1381.165699 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 21:58:38 LOG2 dopset_gen: Result from 'sky2syn': 1631.165699 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 21:58:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631165699.0} 2008-Apr-24 21:58:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 21:58:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-24 21:58:38 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-24 21:58:38 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.5 Dec = +07:44:51.2 2008-Apr-24 21:58:38 LOG3 track_source: Calling 'track_source AGESVC1A_p2_051 120803.5 074451.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 21:58:38 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 21:58:38 LOG5 begin_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2008-Apr-24 21:58:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_051} INFO {Slewing to source 'AGESVC1A_p2_051' ...} 2008-Apr-24 21:58:38 INFO1 track_source: Starting to track AGESVC1A_p2_051 2008-Apr-24 21:58:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_051" 2008-Apr-24 21:58:38 LOG3 vw_send: To DATATAKING: set ra 120803.5 2008-Apr-24 21:58:38 LOG3 vw_send: To DATATAKING: set dec 074451.2 2008-Apr-24 21:58:38 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 21:58:38 LOG3 vw_send: To DATATAKING: pnt tr 120803.5 074451.2 -CJ 2008-Apr-24 21:58:38 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:58:38 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 21:58:38 LOG5 finish_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2008-Apr-24 21:58:38 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 21:58:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:58:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 21:58:38 LOG5 end_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2008-Apr-24 21:58:38 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 21:58:38 LOG5 begin_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2008-Apr-24 21:58:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 21:58:38 LOG3 waittrk: Start waittrk 5 2008-Apr-24 21:58:38 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 21:58:38 LOG5 begin_task: Level: (4) ID = <10352> Status = 0 0 0 0 ok 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631165699.0} 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_051" 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: set ra 120803.5 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: set dec 074451.2 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.5 074451.2 -CJ 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: 120803.5 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: vw% 074451.2 2008-Apr-24 21:58:38 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-24 21:58:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 21:58:43 LOG5 end_task: Level: (4) ID = <10352> Status = 0 0 0 0 ok 2008-Apr-24 21:58:43 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 21:58:43 LOG5 begin_task: Level: (4) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-24 21:58:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 21:58:45 LOG5 end_task: Level: (4) ID = <10353> Status = 0 0 0 0 ok 2008-Apr-24 21:58:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:58:45 INFO2 waittrk: Now tracking AGESVC1A_p2_051 2008-Apr-24 21:58:45 LOG4 waittrk: Current telescope position: Az = 331.25 ZA = 12.00 2008-Apr-24 21:58:45 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 21:58:45 LOG5 finish_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2008-Apr-24 21:58:45 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 21:58:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:58:45 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 21:58:45 LOG5 end_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2008-Apr-24 21:58:45 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 21:58:45 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-24 21:58:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 21:58:45 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 21:58:45 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 21:58:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 21:58:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:58:45 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 21:58:45 LOG5 begin_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Apr-24 21:58:46 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 21:58:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:58:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:58:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 21:58:46 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 21:58:46 LOG5 end_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Apr-24 21:58:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 21:58:46 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 21:58:46 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Apr-24 21:58:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 21:58:46 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 21:58:46 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 21:58:46 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 21:58:46 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 21:58:46 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 21:58:46 LOG5 begin_task: Level: (5) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-24 21:58:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 21:58:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:58:46 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 8 6 dB 2008-Apr-24 21:58:46 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-24 21:58:46 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-24 21:58:46 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-24 21:58:46 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 21:58:46 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 21:58:46 LOG5 end_task: Level: (5) ID = <10357> Status = 0 0 0 0 ok 2008-Apr-24 21:58:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.918 1.100 ALFA beam 1: 0.876 1.064 2008-Apr-24 21:58:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.035 0.954 ALFA beam 3: 0.973 1.034 2008-Apr-24 21:58:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.905 0.940 ALFA beam 5: 0.989 1.138 2008-Apr-24 21:58:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.977 1.002 ALFA beam 7: 1.071 1.103 2008-Apr-24 21:58:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 21:58:46 LOG5 finish_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Apr-24 21:58:46 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 21:58:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:58:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 21:58:46 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Apr-24 21:58:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 21:58:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 21:58:46 LOG5 finish_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-24 21:58:46 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 21:58:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:58:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 21:58:46 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Apr-24 21:58:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 21:58:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 21:58:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 21:58:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 21:58:47 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-24 21:58:47 START begin_task: Starting task 'WAPP calibration' 2008-Apr-24 21:58:47 LOG5 begin_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2008-Apr-24 21:58:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-24 21:58:47 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-24 21:58:47 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 21:58:47 LOG5 begin_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-24 21:58:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 21:58:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 21:58:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:58:47 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 21:58:47 LOG5 begin_task: Level: (5) ID = <10360> Status = 0 0 0 0 ok 2008-Apr-24 21:58:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 21:58:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 21:58:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 21:58:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:58:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 21:58:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 21:58:47 LOG5 end_task: Level: (5) ID = <10360> Status = 0 0 0 0 ok 2008-Apr-24 21:58:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 21:58:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 21:58:47 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 21:58:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 21:58:47 LOG5 begin_task: Level: (5) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-24 21:58:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:58:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 21:58:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 21:58:47 LOG5 end_task: Level: (5) ID = <10361> Status = 0 0 0 0 ok 2008-Apr-24 21:58:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 21:58:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 21:58:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 21:58:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 21:58:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 21:58:47 LOG5 begin_task: Level: (5) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-24 21:58:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 21:58:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 21:58:47 LOG5 end_task: Level: (5) ID = <10362> Status = 0 0 0 0 ok 2008-Apr-24 21:58:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 21:58:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 21:58:47 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 21:58:47 LOG5 finish_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-24 21:58:47 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-24 21:58:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:58:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 21:58:47 LOG5 end_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Apr-24 21:58:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-24 21:58:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 21:58:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 21:58:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 21:58:47 LOG5 begin_task: Level: (4) ID = <10363> Status = 0 0 0 0 ok 2008-Apr-24 21:58:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0008.fits 2008-Apr-24 21:58:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 21:58:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080424.a2048.0008.fits} 2008-Apr-24 21:58:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 21:58:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 21:58:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 21:58:47 LOG5 end_task: Level: (4) ID = <10363> Status = 0 0 0 0 ok 2008-Apr-24 21:58:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-24 21:58:47 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-24 21:58:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 21:58:47 LOG5 begin_task: Level: (4) ID = <10364> Status = 0 0 0 0 ok 2008-Apr-24 21:58:47 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 21:58:47 LOG5 log_alfabeam: Parameters: 12.134305555555555 7.7475555555555546 11.760097 2008.3173602238446 42.799938 2008-Apr-24 21:58:47 LOG4 log_alfabeam: ALFABEAM 0 12.134305555555546 7.747555555555560 2008-Apr-24 21:58:47 LOG4 log_alfabeam: ALFABEAM 1 12.132328893502452 7.849355655608419 2008-Apr-24 21:58:47 LOG4 log_alfabeam: ALFABEAM 2 12.128088408318353 7.781988976840965 2008-Apr-24 21:58:47 LOG4 log_alfabeam: ALFABEAM 3 12.130013551177949 7.679961976683045 2008-Apr-24 21:58:47 LOG4 log_alfabeam: ALFABEAM 4 12.136259536459548 7.645626478611510 2008-Apr-24 21:58:47 LOG4 log_alfabeam: ALFABEAM 5 12.140558194422601 7.713792336200945 2008-Apr-24 21:58:47 LOG4 log_alfabeam: ALFABEAM 6 12.138552759115472 7.815491299990453 2008-Apr-24 21:58:47 INFO2 take_spectra: Starting WAPP scan: 811500206 2008-Apr-24 21:58:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 21:58:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 21:58:48 LOG5 begin_task: Level: (5) ID = <10365> Status = 0 0 0 0 ok 2008-Apr-24 21:58:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 21:58:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7129.00 2008-Apr-24 21:58:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165699 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 21:58:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:58:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:58:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 21:58:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:58:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:58:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:58:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:58:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:58:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 21:58:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 21:58:54 LOG5 end_task: Level: (5) ID = <10365> Status = 0 0 0 0 ok 2008-Apr-24 21:58:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 21:58:54 LOG5 end_task: Level: (4) ID = <10364> Status = 0 0 0 0 ok 2008-Apr-24 21:58:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 21:58:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 21:58:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 21:58:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 21:58:54 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Apr-24 21:58:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.541 > 1.4)! 2008-Apr-24 21:58:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 1.100 0.876 1.064 2008-Apr-24 21:58:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.401 1.308 1.344 1.418 2008-Apr-24 21:58:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.267 1.311 1.382 1.524 2008-Apr-24 21:58:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.379 1.395 1.510 1.541 2008-Apr-24 21:58:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 21:58:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 21:58:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 21:58:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 21:58:55 LOG5 end_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Apr-24 21:58:55 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-24 21:58:55 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-24 21:58:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 21:58:55 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Apr-24 21:58:55 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 21:58:55 LOG5 log_alfabeam: Parameters: 12.134305555555555 7.7475555555555546 11.762047 2008.3173604456613 42.799938 2008-Apr-24 21:58:55 LOG4 log_alfabeam: ALFABEAM 0 12.134305555555557 7.747555555555550 2008-Apr-24 21:58:55 LOG4 log_alfabeam: ALFABEAM 1 12.132342936464998 7.849415627207722 2008-Apr-24 21:58:55 LOG4 log_alfabeam: ALFABEAM 2 12.128093192730645 7.782178816996557 2008-Apr-24 21:58:55 LOG4 log_alfabeam: ALFABEAM 3 12.130004207578590 7.680093159225890 2008-Apr-24 21:58:55 LOG4 log_alfabeam: ALFABEAM 4 12.136245457752423 7.645567056214761 2008-Apr-24 21:58:55 LOG4 log_alfabeam: ALFABEAM 5 12.140553541635962 7.713602190110012 2008-Apr-24 21:58:55 LOG4 log_alfabeam: ALFABEAM 6 12.138562099700472 7.815361880582945 2008-Apr-24 21:58:55 INFO2 take_spectra: Starting WAPP scan: 811500207 2008-Apr-24 21:58:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 21:58:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 21:58:55 LOG5 begin_task: Level: (5) ID = <10368> Status = 0 0 0 0 ok 2008-Apr-24 21:58:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 21:58:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7136.00 2008-Apr-24 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165699 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:59:01 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-24 21:59:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 21:59:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 21:59:01 LOG5 end_task: Level: (5) ID = <10368> Status = 0 0 0 0 ok 2008-Apr-24 21:59:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 21:59:01 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Apr-24 21:59:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 21:59:01 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-24 21:59:01 LOG5 finish_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2008-Apr-24 21:59:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-24 21:59:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:59:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-24 21:59:01 LOG5 end_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2008-Apr-24 21:59:02 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-24 21:59:02 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 331.56 and ZA = 12.03 2008-Apr-24 21:59:02 LOG3 track_source: Calling 'track_source AGESVC1A_p2_051 331.56 12.0308325875 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 21:59:02 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 21:59:02 LOG5 begin_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2008-Apr-24 21:59:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_051} INFO {Slewing to source 'AGESVC1A_p2_051' ...} 2008-Apr-24 21:59:02 INFO1 track_source: Starting to track AGESVC1A_p2_051 2008-Apr-24 21:59:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_051" 2008-Apr-24 21:59:02 LOG3 vw_send: To DATATAKING: set ra 331.56 2008-Apr-24 21:59:02 LOG3 vw_send: To DATATAKING: set dec 12.0308325875 2008-Apr-24 21:59:02 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 21:59:02 LOG3 vw_send: To DATATAKING: pnt tr 331.56 12.0308325875 -CF 2008-Apr-24 21:59:02 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:59:02 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 21:59:02 LOG5 finish_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2008-Apr-24 21:59:02 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 21:59:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 21:59:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 21:59:02 LOG5 end_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2008-Apr-24 21:59:02 LOG1 fixed_driftmap: Parameters: HA = -00:22:59.7 Start = 11:46:27.4 LST = 11:45:50.4 diff = 37.0 secs 2008-Apr-24 21:59:02 INFO2 fixed_driftmap: Waiting 35 seconds for RA 12:09:27 2008-Apr-24 21:59:02 INFO2 lstwait: Waiting for 34.9 secs from LST 11:45:50 to LST 11:46:25 ... 2008-Apr-24 21:59:02 LOG4 send_obs_status: To obs_status: <1> TASKTIME 34.943950574016192 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 21:59:02 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-24 21:59:02 LOG5 begin_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2008-Apr-24 21:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 1.433 (still bad) 2008-Apr-24 21:59:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_051" 2008-Apr-24 21:59:02 LOG4 got_cormsg: From DATATAKING: set ra 331.56 2008-Apr-24 21:59:02 LOG4 got_cormsg: From DATATAKING: set dec 12.0308325875 2008-Apr-24 21:59:02 LOG4 got_cormsg: From DATATAKING: vw% 331.56 2008-Apr-24 21:59:02 LOG4 got_cormsg: From DATATAKING: vw% 12.0308325875 2008-Apr-24 21:59:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:59:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 21:59:02 LOG4 got_cormsg: From DATATAKING: pnt tr 331.56 12.0308325875 -CF 2008-Apr-24 21:59:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 21:59:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 21:59:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 21:59:37 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-24 21:59:37 LOG5 end_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2008-Apr-24 21:59:37 LOG4 lstwait: Finished waiting, the gui caused difference: 1.0575772400031269 2008-Apr-24 21:59:37 INFO3 lstwait: Finished waiting 2008-Apr-24 21:59:37 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 21:59:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-24 21:59:37 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 21:59:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-24 21:59:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-24 21:59:37 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-24 21:59:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 21:59:37 LOG5 begin_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2008-Apr-24 21:59:37 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-24 21:59:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-24 21:59:37 INFO2 take_spectra: Starting WAPP scan: 811500208 2008-Apr-24 21:59:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-24 21:59:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 21:59:37 LOG5 begin_task: Level: (4) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-24 21:59:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 21:59:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7178.00 2008-Apr-24 21:59:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165699 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 21:59:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:59:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:59:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 21:59:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 21:59:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:59:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:59:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:59:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165699 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 21:59:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.877 and 1.138 2008-Apr-24 22:08:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (8.216 > 1.4)! 2008-Apr-24 22:08:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 8.216 0.884 1.069 2008-Apr-24 22:08:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.958 0.980 1.040 2008-Apr-24 22:08:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.941 0.994 1.141 2008-Apr-24 22:08:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 1.006 1.075 1.109 2008-Apr-24 22:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.217 (still bad) 2008-Apr-24 22:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.223 (still bad) 2008-Apr-24 22:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.212 (still bad) 2008-Apr-24 22:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.204 (still bad) 2008-Apr-24 22:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.206 (still bad) 2008-Apr-24 22:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.216 (still bad) 2008-Apr-24 22:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.195 (still bad) 2008-Apr-24 22:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.180 (still bad) 2008-Apr-24 22:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.190 (still bad) 2008-Apr-24 22:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.201 (still bad) 2008-Apr-24 22:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.216 (still bad) 2008-Apr-24 22:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.217 (still bad) 2008-Apr-24 22:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.196 (still bad) 2008-Apr-24 22:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.197 (still bad) 2008-Apr-24 22:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.193 (still bad) 2008-Apr-24 22:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.213 (still bad) 2008-Apr-24 22:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.211 (still bad) 2008-Apr-24 22:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.221 (still bad) 2008-Apr-24 22:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.201 (still bad) 2008-Apr-24 22:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.205 (still bad) 2008-Apr-24 22:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.204 (still bad) 2008-Apr-24 22:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.204 (still bad) 2008-Apr-24 22:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.200 (still bad) 2008-Apr-24 22:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.198 (still bad) 2008-Apr-24 22:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.205 (still bad) 2008-Apr-24 22:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.186 (still bad) 2008-Apr-24 22:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.194 (still bad) 2008-Apr-24 22:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.188 (still bad) 2008-Apr-24 22:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.208 (still bad) 2008-Apr-24 22:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.209 (still bad) 2008-Apr-24 22:09:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (8.217 > 1.4)! 2008-Apr-24 22:09:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 8.217 0.882 1.067 2008-Apr-24 22:09:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.954 0.980 1.041 2008-Apr-24 22:09:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.946 0.997 1.144 2008-Apr-24 22:09:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 1.005 1.079 1.110 2008-Apr-24 22:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.196 (still bad) 2008-Apr-24 22:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.202 (still bad) 2008-Apr-24 22:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.216 (still bad) 2008-Apr-24 22:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.187 (still bad) 2008-Apr-24 22:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 8.212 (still bad) 2008-Apr-24 22:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.210 (still bad) 2008-Apr-24 22:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.227 (still bad) 2008-Apr-24 22:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.220 (still bad) 2008-Apr-24 22:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.210 (still bad) 2008-Apr-24 22:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.230 (still bad) 2008-Apr-24 22:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.226 (still bad) 2008-Apr-24 22:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.225 (still bad) 2008-Apr-24 22:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 8.236 (still bad) 2008-Apr-24 22:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 8.220 (still bad) 2008-Apr-24 22:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.216 (still bad) 2008-Apr-24 22:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.213 (still bad) 2008-Apr-24 22:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.207 (still bad) 2008-Apr-24 22:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 8.232 (still bad) 2008-Apr-24 22:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.227 (still bad) 2008-Apr-24 22:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.228 (still bad) 2008-Apr-24 22:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 8.218 (still bad) 2008-Apr-24 22:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.210 (still bad) 2008-Apr-24 22:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.206 (still bad) 2008-Apr-24 22:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.216 (still bad) 2008-Apr-24 22:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.223 (still bad) 2008-Apr-24 22:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.208 (still bad) 2008-Apr-24 22:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.215 (still bad) 2008-Apr-24 22:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.208 (still bad) 2008-Apr-24 22:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.236 (still bad) 2008-Apr-24 22:10:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (8.222 > 1.4)! 2008-Apr-24 22:10:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 8.222 0.882 1.070 2008-Apr-24 22:10:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.956 0.982 1.043 2008-Apr-24 22:10:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.947 0.999 1.146 2008-Apr-24 22:10:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 1.009 1.083 1.114 2008-Apr-24 22:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.207 (still bad) 2008-Apr-24 22:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.198 (still bad) 2008-Apr-24 22:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.188 (still bad) 2008-Apr-24 22:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.225 (still bad) 2008-Apr-24 22:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.231 (still bad) 2008-Apr-24 22:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.226 (still bad) 2008-Apr-24 22:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.218 (still bad) 2008-Apr-24 22:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.234 (still bad) 2008-Apr-24 22:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.224 (still bad) 2008-Apr-24 22:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.232 (still bad) 2008-Apr-24 22:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.225 (still bad) 2008-Apr-24 22:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.232 (still bad) 2008-Apr-24 22:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.266 (still bad) 2008-Apr-24 22:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.267 (still bad) 2008-Apr-24 22:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.304 (still bad) 2008-Apr-24 22:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.322 (still bad) 2008-Apr-24 22:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.332 (still bad) 2008-Apr-24 22:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 8.339 (still bad) 2008-Apr-24 22:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 8.298 (still bad) 2008-Apr-24 22:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 8.289 (still bad) 2008-Apr-24 22:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 8.267 (still bad) 2008-Apr-24 22:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.241 (still bad) 2008-Apr-24 22:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.230 (still bad) 2008-Apr-24 22:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.227 (still bad) 2008-Apr-24 22:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 8.214 (still bad) 2008-Apr-24 22:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 8.221 (still bad) 2008-Apr-24 22:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 8.211 (still bad) 2008-Apr-24 22:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 8.217 (still bad) 2008-Apr-24 22:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 8.223 (still bad) 2008-Apr-24 22:11:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (8.223 > 1.4)! 2008-Apr-24 22:11:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 8.223 0.887 1.076 2008-Apr-24 22:11:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.961 0.988 1.049 2008-Apr-24 22:11:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.944 0.998 1.148 2008-Apr-24 22:11:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 1.007 1.082 1.112 2008-Apr-24 22:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.207 (still bad) 2008-Apr-24 22:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.201 (still bad) 2008-Apr-24 22:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.216 (still bad) 2008-Apr-24 22:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.220 (still bad) 2008-Apr-24 22:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.213 (still bad) 2008-Apr-24 22:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.211 (still bad) 2008-Apr-24 22:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.224 (still bad) 2008-Apr-24 22:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.215 (still bad) 2008-Apr-24 22:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.225 (still bad) 2008-Apr-24 22:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.221 (still bad) 2008-Apr-24 22:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.214 (still bad) 2008-Apr-24 22:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.219 (still bad) 2008-Apr-24 22:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.220 (still bad) 2008-Apr-24 22:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.220 (still bad) 2008-Apr-24 22:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.228 (still bad) 2008-Apr-24 22:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.209 (still bad) 2008-Apr-24 22:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.207 (still bad) 2008-Apr-24 22:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.218 (still bad) 2008-Apr-24 22:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.223 (still bad) 2008-Apr-24 22:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.225 (still bad) 2008-Apr-24 22:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 8.205 (still bad) 2008-Apr-24 22:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.216 (still bad) 2008-Apr-24 22:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.229 (still bad) 2008-Apr-24 22:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.222 (still bad) 2008-Apr-24 22:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 8.222 (still bad) 2008-Apr-24 22:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 8.234 (still bad) 2008-Apr-24 22:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 8.239 (still bad) 2008-Apr-24 22:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 8.220 (still bad) 2008-Apr-24 22:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 8.233 (still bad) 2008-Apr-24 22:12:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (8.237 > 1.4)! 2008-Apr-24 22:12:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 8.237 0.881 1.070 2008-Apr-24 22:12:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.957 0.985 1.044 2008-Apr-24 22:12:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.918 0.948 0.999 1.148 2008-Apr-24 22:12:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 1.008 1.083 1.111 2008-Apr-24 22:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.229 (still bad) 2008-Apr-24 22:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.227 (still bad) 2008-Apr-24 22:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.238 (still bad) 2008-Apr-24 22:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.237 (still bad) 2008-Apr-24 22:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.243 (still bad) 2008-Apr-24 22:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.250 (still bad) 2008-Apr-24 22:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.225 (still bad) 2008-Apr-24 22:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.238 (still bad) 2008-Apr-24 22:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.243 (still bad) 2008-Apr-24 22:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.256 (still bad) 2008-Apr-24 22:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.245 (still bad) 2008-Apr-24 22:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.246 (still bad) 2008-Apr-24 22:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.243 (still bad) 2008-Apr-24 22:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.242 (still bad) 2008-Apr-24 22:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.248 (still bad) 2008-Apr-24 22:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.238 (still bad) 2008-Apr-24 22:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.241 (still bad) 2008-Apr-24 22:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.228 (still bad) 2008-Apr-24 22:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.238 (still bad) 2008-Apr-24 22:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.254 (still bad) 2008-Apr-24 22:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.179 (still bad) 2008-Apr-24 22:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.255 (still bad) 2008-Apr-24 22:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.268 (still bad) 2008-Apr-24 22:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 6.765 (still bad) 2008-Apr-24 22:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.292 (still bad) 2008-Apr-24 22:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.293 (still bad) 2008-Apr-24 22:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.293 (still bad) 2008-Apr-24 22:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.300 (still bad) 2008-Apr-24 22:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.290 (still bad) 2008-Apr-24 22:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.293 (still bad) 2008-Apr-24 22:14:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (8.293 > 1.4)! 2008-Apr-24 22:14:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 8.293 0.882 1.072 2008-Apr-24 22:14:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.960 0.984 1.044 2008-Apr-24 22:14:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.918 0.947 1.001 1.150 2008-Apr-24 22:14:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 1.011 1.090 1.117 2008-Apr-24 22:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.291 (still bad) 2008-Apr-24 22:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.321 (still bad) 2008-Apr-24 22:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.287 (still bad) 2008-Apr-24 22:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.292 (still bad) 2008-Apr-24 22:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.294 (still bad) 2008-Apr-24 22:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.290 (still bad) 2008-Apr-24 22:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.298 (still bad) 2008-Apr-24 22:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.294 (still bad) 2008-Apr-24 22:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.308 (still bad) 2008-Apr-24 22:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.306 (still bad) 2008-Apr-24 22:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.308 (still bad) 2008-Apr-24 22:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 8.285 (still bad) 2008-Apr-24 22:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 8.304 (still bad) 2008-Apr-24 22:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 8.284 (still bad) 2008-Apr-24 22:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 8.303 (still bad) 2008-Apr-24 22:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.888 and 8.291 (still bad) 2008-Apr-24 22:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 8.295 (still bad) 2008-Apr-24 22:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.283 (still bad) 2008-Apr-24 22:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.309 (still bad) 2008-Apr-24 22:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.296 (still bad) 2008-Apr-24 22:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.298 (still bad) 2008-Apr-24 22:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.312 (still bad) 2008-Apr-24 22:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.285 (still bad) 2008-Apr-24 22:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.275 (still bad) 2008-Apr-24 22:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.300 (still bad) 2008-Apr-24 22:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.279 (still bad) 2008-Apr-24 22:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.235 (still bad) 2008-Apr-24 22:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.293 (still bad) 2008-Apr-24 22:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.289 (still bad) 2008-Apr-24 22:15:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (8.292 > 1.4)! 2008-Apr-24 22:15:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 8.292 0.882 1.074 2008-Apr-24 22:15:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.959 0.986 1.044 2008-Apr-24 22:15:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.950 0.999 1.151 2008-Apr-24 22:15:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 1.008 1.086 1.113 2008-Apr-24 22:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.303 (still bad) 2008-Apr-24 22:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.305 (still bad) 2008-Apr-24 22:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.300 (still bad) 2008-Apr-24 22:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.282 (still bad) 2008-Apr-24 22:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.293 (still bad) 2008-Apr-24 22:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.319 (still bad) 2008-Apr-24 22:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.301 (still bad) 2008-Apr-24 22:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.304 (still bad) 2008-Apr-24 22:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.290 (still bad) 2008-Apr-24 22:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.293 (still bad) 2008-Apr-24 22:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.297 (still bad) 2008-Apr-24 22:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.288 (still bad) 2008-Apr-24 22:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.291 (still bad) 2008-Apr-24 22:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.294 (still bad) 2008-Apr-24 22:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.294 (still bad) 2008-Apr-24 22:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.310 (still bad) 2008-Apr-24 22:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.301 (still bad) 2008-Apr-24 22:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.285 (still bad) 2008-Apr-24 22:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.299 (still bad) 2008-Apr-24 22:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.309 (still bad) 2008-Apr-24 22:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.290 (still bad) 2008-Apr-24 22:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.290 (still bad) 2008-Apr-24 22:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.300 (still bad) 2008-Apr-24 22:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.250 (still bad) 2008-Apr-24 22:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.253 (still bad) 2008-Apr-24 22:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.269 (still bad) 2008-Apr-24 22:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.279 (still bad) 2008-Apr-24 22:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.283 (still bad) 2008-Apr-24 22:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.881 and 8.253 (still bad) 2008-Apr-24 22:16:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (8.281 > 1.4)! 2008-Apr-24 22:16:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 8.281 0.882 1.074 2008-Apr-24 22:16:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.959 0.987 1.046 2008-Apr-24 22:16:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.954 1.002 1.151 2008-Apr-24 22:16:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.990 1.009 1.085 1.116 2008-Apr-24 22:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.277 (still bad) 2008-Apr-24 22:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.272 (still bad) 2008-Apr-24 22:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.265 (still bad) 2008-Apr-24 22:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.275 (still bad) 2008-Apr-24 22:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.270 (still bad) 2008-Apr-24 22:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.282 (still bad) 2008-Apr-24 22:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.290 (still bad) 2008-Apr-24 22:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.293 (still bad) 2008-Apr-24 22:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.288 (still bad) 2008-Apr-24 22:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.275 (still bad) 2008-Apr-24 22:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.271 (still bad) 2008-Apr-24 22:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.270 (still bad) 2008-Apr-24 22:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.273 (still bad) 2008-Apr-24 22:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.285 (still bad) 2008-Apr-24 22:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.283 (still bad) 2008-Apr-24 22:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.277 (still bad) 2008-Apr-24 22:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.268 (still bad) 2008-Apr-24 22:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.280 (still bad) 2008-Apr-24 22:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.282 (still bad) 2008-Apr-24 22:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 8.288 (still bad) 2008-Apr-24 22:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.272 (still bad) 2008-Apr-24 22:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.293 (still bad) 2008-Apr-24 22:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.282 (still bad) 2008-Apr-24 22:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.288 (still bad) 2008-Apr-24 22:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.273 (still bad) 2008-Apr-24 22:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.287 (still bad) 2008-Apr-24 22:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.282 (still bad) 2008-Apr-24 22:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.284 (still bad) 2008-Apr-24 22:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.283 (still bad) 2008-Apr-24 22:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.284 (still bad) 2008-Apr-24 22:17:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (8.278 > 1.4)! 2008-Apr-24 22:17:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 8.278 0.884 1.074 2008-Apr-24 22:17:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.958 0.991 1.049 2008-Apr-24 22:17:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.951 1.004 1.151 2008-Apr-24 22:17:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 1.008 1.086 1.115 2008-Apr-24 22:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.270 (still bad) 2008-Apr-24 22:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.268 (still bad) 2008-Apr-24 22:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.273 (still bad) 2008-Apr-24 22:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.269 (still bad) 2008-Apr-24 22:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.296 (still bad) 2008-Apr-24 22:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.275 (still bad) 2008-Apr-24 22:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.295 (still bad) 2008-Apr-24 22:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.285 (still bad) 2008-Apr-24 22:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.291 (still bad) 2008-Apr-24 22:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.250 (still bad) 2008-Apr-24 22:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.299 (still bad) 2008-Apr-24 22:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.306 (still bad) 2008-Apr-24 22:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.282 (still bad) 2008-Apr-24 22:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.295 (still bad) 2008-Apr-24 22:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.280 (still bad) 2008-Apr-24 22:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.297 (still bad) 2008-Apr-24 22:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.314 (still bad) 2008-Apr-24 22:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.317 (still bad) 2008-Apr-24 22:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.882 and 8.331 (still bad) 2008-Apr-24 22:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.327 (still bad) 2008-Apr-24 22:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.333 (still bad) 2008-Apr-24 22:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.326 (still bad) 2008-Apr-24 22:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.325 (still bad) 2008-Apr-24 22:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.301 (still bad) 2008-Apr-24 22:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.292 (still bad) 2008-Apr-24 22:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.279 (still bad) 2008-Apr-24 22:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.287 (still bad) 2008-Apr-24 22:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.273 (still bad) 2008-Apr-24 22:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.289 (still bad) 2008-Apr-24 22:18:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (8.276 > 1.4)! 2008-Apr-24 22:18:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 8.276 0.883 1.074 2008-Apr-24 22:18:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.055 0.968 0.992 1.050 2008-Apr-24 22:18:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.954 1.004 1.153 2008-Apr-24 22:18:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 1.008 1.088 1.115 2008-Apr-24 22:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.292 (still bad) 2008-Apr-24 22:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.293 (still bad) 2008-Apr-24 22:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.290 (still bad) 2008-Apr-24 22:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.288 (still bad) 2008-Apr-24 22:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.297 (still bad) 2008-Apr-24 22:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.290 (still bad) 2008-Apr-24 22:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.296 (still bad) 2008-Apr-24 22:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.280 (still bad) 2008-Apr-24 22:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.283 (still bad) 2008-Apr-24 22:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.284 (still bad) 2008-Apr-24 22:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.280 (still bad) 2008-Apr-24 22:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.292 (still bad) 2008-Apr-24 22:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.297 (still bad) 2008-Apr-24 22:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.294 (still bad) 2008-Apr-24 22:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.299 (still bad) 2008-Apr-24 22:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.298 (still bad) 2008-Apr-24 22:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.296 (still bad) 2008-Apr-24 22:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.306 (still bad) 2008-Apr-24 22:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.316 (still bad) 2008-Apr-24 22:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.313 (still bad) 2008-Apr-24 22:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.294 (still bad) 2008-Apr-24 22:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.296 (still bad) 2008-Apr-24 22:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.293 (still bad) 2008-Apr-24 22:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 8.295 (still bad) 2008-Apr-24 22:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 8.307 (still bad) 2008-Apr-24 22:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.297 (still bad) 2008-Apr-24 22:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.299 (still bad) 2008-Apr-24 22:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.305 (still bad) 2008-Apr-24 22:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.301 (still bad) 2008-Apr-24 22:19:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (8.274 > 1.4)! 2008-Apr-24 22:19:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 8.274 0.885 1.076 2008-Apr-24 22:19:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.960 0.989 1.046 2008-Apr-24 22:19:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.922 0.952 1.006 1.154 2008-Apr-24 22:19:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 1.008 1.087 1.116 2008-Apr-24 22:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.286 (still bad) 2008-Apr-24 22:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.281 (still bad) 2008-Apr-24 22:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.288 (still bad) 2008-Apr-24 22:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.288 (still bad) 2008-Apr-24 22:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.288 (still bad) 2008-Apr-24 22:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.302 (still bad) 2008-Apr-24 22:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.286 (still bad) 2008-Apr-24 22:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.290 (still bad) 2008-Apr-24 22:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.275 (still bad) 2008-Apr-24 22:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.305 (still bad) 2008-Apr-24 22:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 8.290 (still bad) 2008-Apr-24 22:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.300 (still bad) 2008-Apr-24 22:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.285 (still bad) 2008-Apr-24 22:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.294 (still bad) 2008-Apr-24 22:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 8.297 (still bad) 2008-Apr-24 22:19:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 22:19:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 22:19:38 LOG5 end_task: Level: (4) ID = <10372> Status = 0 0 0 0 ok 2008-Apr-24 22:19:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 22:19:38 LOG5 end_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2008-Apr-24 22:19:38 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-24 22:19:38 LOG5 finish_task: Level: (2) ID = <10338> Status = 0 0 0 0 ok 2008-Apr-24 22:19:38 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-24 22:19:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 22:19:38 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-24 22:19:38 LOG5 end_task: Level: (2) ID = <10338> Status = 0 0 0 0 ok 2008-Apr-24 22:19:38 COMMAND run_command_line: EXECUTING command 39: 'FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_053 ra=120900.00 dec=74200.00' 2008-Apr-24 22:19:38 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-24 22:19:39 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 22:19:39 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 0.00 19.1 hcorcal 5 tracking no first 1 AGESVC1A_p2_053 120900.00 74200.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 22:19:39 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-24 22:19:39 LOG5 begin_task: Level: (2) ID = <10373> Status = 0 0 0 0 ok 2008-Apr-24 22:19:39 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_051' 2008-Apr-24 22:19:39 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-24 22:19:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_053} 2008-Apr-24 22:19:39 INFO3 fixed_driftmap: Sending telescope to Az = 0.00 and ZA = 10.70 2008-Apr-24 22:19:39 LOG3 track_source: Calling 'track_source AGESVC1A_p2_053 0.00 10.7025313337 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 22:19:39 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 22:19:39 LOG5 begin_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Apr-24 22:19:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_053} INFO {Slewing to source 'AGESVC1A_p2_053' ...} 2008-Apr-24 22:19:39 INFO1 track_source: Starting to track AGESVC1A_p2_053 2008-Apr-24 22:19:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_053" 2008-Apr-24 22:19:39 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-24 22:19:39 LOG3 vw_send: To DATATAKING: set dec 10.7025313337 2008-Apr-24 22:19:39 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 22:19:39 LOG3 vw_send: To DATATAKING: pnt tr 0.00 10.7025313337 -CF 2008-Apr-24 22:19:39 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 22:19:39 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 22:19:39 LOG5 finish_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Apr-24 22:19:39 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 22:19:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:19:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 22:19:39 LOG5 end_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Apr-24 22:19:39 START begin_task: Starting task 'rotate ALFA to +19.1 degrees' 2008-Apr-24 22:19:39 LOG5 begin_task: Level: (3) ID = <10375> Status = 0 0 0 0 ok 2008-Apr-24 22:19:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19.1 degrees ...} 2008-Apr-24 22:19:39 INFO2 rotate_alfa: ALFA commanded to +19.1 degrees 2008-Apr-24 22:19:39 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.1 REPLY 2008-Apr-24 22:19:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 22:19:39 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 22:19:39 LOG5 begin_task: Level: (4) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-24 22:19:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_053" 2008-Apr-24 22:19:39 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-24 22:19:39 LOG4 got_cormsg: From DATATAKING: set dec 10.7025313337 2008-Apr-24 22:19:39 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-24 22:19:39 LOG4 got_cormsg: From DATATAKING: vw% 10.7025313337 2008-Apr-24 22:19:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:19:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 22:19:39 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 10.7025313337 -CF 2008-Apr-24 22:19:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 22:19:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 22:19:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 8.287 (still bad) 2008-Apr-24 22:19:54 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 22:19:54 INFO3 alfa_motor: ALFA rotator in-position +19.10 degrees 2008-Apr-24 22:19:54 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 22:19:54 LOG5 end_task: Level: (4) ID = <10376> Status = 0 0 0 0 ok 2008-Apr-24 22:19:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 22:19:54 STOP finish_task: Finishing task 'rotate ALFA to +19.1 degrees' 2008-Apr-24 22:19:54 LOG5 finish_task: Level: (3) ID = <10375> Status = 0 0 0 0 ok 2008-Apr-24 22:19:54 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19.1 degrees 2008-Apr-24 22:19:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:19:54 STOP end_task: Finishing task 'rotate ALFA to +19.1 degrees' with status 'OK' 2008-Apr-24 22:19:54 LOG5 end_task: Level: (3) ID = <10375> Status = 0 0 0 0 ok 2008-Apr-24 22:19:54 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 22:19:54 LOG5 begin_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-24 22:19:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 22:19:54 LOG3 waittrk: Start waittrk 5 2008-Apr-24 22:19:54 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 22:19:54 LOG5 begin_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-24 22:19:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 22:19:59 LOG5 end_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2008-Apr-24 22:19:59 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 22:19:59 LOG5 begin_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Apr-24 22:21:03 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 22:21:03 LOG5 end_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Apr-24 22:21:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 22:21:03 INFO2 waittrk: Now tracking AGESVC1A_p2_053 2008-Apr-24 22:21:03 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 10.67 2008-Apr-24 22:21:03 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 22:21:03 LOG5 finish_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-24 22:21:03 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 22:21:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:21:03 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 22:21:03 LOG5 end_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2008-Apr-24 22:21:03 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 22:21:03 LOG5 begin_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-24 22:21:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 22:21:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 22:21:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 22:21:03 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 22:21:03 LOG5 begin_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Apr-24 22:21:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 22:21:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 22:21:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:21:04 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 22:21:04 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 22:21:04 LOG5 end_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Apr-24 22:21:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 22:21:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 22:21:04 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 22:21:04 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 22:21:04 LOG5 begin_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Apr-24 22:21:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:21:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 22:21:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 22:21:05 LOG5 end_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Apr-24 22:21:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 22:21:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 22:21:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 22:21:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 22:21:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 22:21:05 LOG5 begin_task: Level: (4) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-24 22:21:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 22:21:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 22:21:05 LOG5 end_task: Level: (4) ID = <10383> Status = 0 0 0 0 ok 2008-Apr-24 22:21:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 22:21:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 22:21:05 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 22:21:05 LOG5 finish_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-24 22:21:05 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 22:21:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:21:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 22:21:05 LOG5 end_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Apr-24 22:21:05 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-24 22:21:05 INFO2 astwait: Waiting for 29 seconds from 02:21:05 to 02:21:34 UTC ... 2008-Apr-24 22:21:05 LOG4 send_obs_status: To obs_status: <1> TASKTIME 29 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 22:21:05 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-24 22:21:05 LOG5 begin_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2008-Apr-24 22:21:34 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-24 22:21:34 LOG5 end_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2008-Apr-24 22:21:34 INFO3 astwait: Finished waiting 2008-Apr-24 22:21:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 22:21:34 LOG5 dopset_later: Calling 'dopset_later 60.919606302722308' 2008-Apr-24 22:21:34 INFO3 dopset_later: Setting Doppler correction for 22:22:34 (60.9 seconds from now) 2008-Apr-24 22:21:34 LOG5 antvel: Calling 'antvel 0.000000 10.702531 F 60.919606302722308' 2008-Apr-24 22:21:34 LOG2 antvel: Parameters to Doppler: Heliocentric 94954 2008 115 0.0 2008-Apr-24 22:21:34 INFO5 antvel: Computed antenna velocity: +16.91552 km/s 2008-Apr-24 22:21:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=16.915520269799998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-24 22:21:34 INFO4 dopset_gen: New sky frequencies: 1381.165498 1381.165498 1381.165498 1381.165498 1381.165498 1381.165498 1381.165498 1381.165498 1381.165498 2008-Apr-24 22:21:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.165498 sky0=1381.165498 sky1=1381.165498 sky2=1381.165498 sky3=1381.165498 sky4=1381.165498 sky5=1381.165498 sky6=1381.165498 sky7=1381.165498 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 22:21:34 LOG2 dopset_gen: Result from 'sky2syn': 1631.165498 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 22:21:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631165498.0} 2008-Apr-24 22:21:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 22:21:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-24 22:21:34 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-24 22:21:34 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.6 Dec = +07:41:51.2 2008-Apr-24 22:21:34 LOG3 track_source: Calling 'track_source AGESVC1A_p2_053 120803.6 074151.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 22:21:34 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 22:21:34 LOG5 begin_task: Level: (3) ID = <10385> Status = 0 0 0 0 ok 2008-Apr-24 22:21:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_053} INFO {Slewing to source 'AGESVC1A_p2_053' ...} 2008-Apr-24 22:21:34 INFO1 track_source: Starting to track AGESVC1A_p2_053 2008-Apr-24 22:21:34 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_053" 2008-Apr-24 22:21:34 LOG3 vw_send: To DATATAKING: set ra 120803.6 2008-Apr-24 22:21:34 LOG3 vw_send: To DATATAKING: set dec 074151.2 2008-Apr-24 22:21:34 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 22:21:34 LOG3 vw_send: To DATATAKING: pnt tr 120803.6 074151.2 -CJ 2008-Apr-24 22:21:34 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 22:21:34 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 22:21:34 LOG5 finish_task: Level: (3) ID = <10385> Status = 0 0 0 0 ok 2008-Apr-24 22:21:34 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 22:21:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:21:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 22:21:34 LOG5 end_task: Level: (3) ID = <10385> Status = 0 0 0 0 ok 2008-Apr-24 22:21:34 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 22:21:34 LOG5 begin_task: Level: (3) ID = <10386> Status = 0 0 0 0 ok 2008-Apr-24 22:21:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 22:21:34 LOG3 waittrk: Start waittrk 5 2008-Apr-24 22:21:34 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 22:21:34 LOG5 begin_task: Level: (4) ID = <10387> Status = 0 0 0 0 ok 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631165498.0} 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_053" 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: set ra 120803.6 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: set dec 074151.2 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: vw% 120803.6 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: vw% 074151.2 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.6 074151.2 -CJ 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 22:21:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:21:39 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 22:21:39 LOG5 end_task: Level: (4) ID = <10387> Status = 0 0 0 0 ok 2008-Apr-24 22:21:39 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 22:21:39 LOG5 begin_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-24 22:21:41 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 22:21:41 LOG5 end_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2008-Apr-24 22:21:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 22:21:41 INFO2 waittrk: Now tracking AGESVC1A_p2_053 2008-Apr-24 22:21:41 LOG4 waittrk: Current telescope position: Az = 359.73 ZA = 10.67 2008-Apr-24 22:21:41 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 22:21:41 LOG5 finish_task: Level: (3) ID = <10386> Status = 0 0 0 0 ok 2008-Apr-24 22:21:41 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 22:21:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:21:41 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 22:21:41 LOG5 end_task: Level: (3) ID = <10386> Status = 0 0 0 0 ok 2008-Apr-24 22:21:41 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 22:21:41 LOG5 begin_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-24 22:21:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 22:21:41 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 22:21:41 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 22:21:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 22:21:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 22:21:41 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 22:21:41 LOG5 begin_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Apr-24 22:21:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 22:21:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 22:21:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:21:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 22:21:42 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 22:21:42 LOG5 end_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Apr-24 22:21:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 22:21:42 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 22:21:42 LOG5 begin_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Apr-24 22:21:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 22:21:42 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 22:21:42 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 22:21:42 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 22:21:42 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 22:21:42 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 22:21:42 LOG5 begin_task: Level: (5) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-24 22:21:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 22:21:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:21:42 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 2 dB --- beam 1: 7 6 dB 2008-Apr-24 22:21:42 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-24 22:21:42 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-24 22:21:42 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 2 dB 2008-Apr-24 22:21:42 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 22:21:42 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 22:21:42 LOG5 end_task: Level: (5) ID = <10392> Status = 0 0 0 0 ok 2008-Apr-24 22:21:42 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.921 1.064 ALFA beam 1: 1.133 1.090 2008-Apr-24 22:21:42 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.021 0.944 ALFA beam 3: 0.970 1.041 2008-Apr-24 22:21:42 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.918 0.943 ALFA beam 5: 1.009 0.884 2008-Apr-24 22:21:42 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.011 1.009 ALFA beam 7: 1.109 1.117 2008-Apr-24 22:21:42 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 22:21:42 LOG5 finish_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Apr-24 22:21:42 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 22:21:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:21:42 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 22:21:42 LOG5 end_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2008-Apr-24 22:21:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 22:21:42 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 22:21:42 LOG5 finish_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-24 22:21:42 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 22:21:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:21:42 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 22:21:42 LOG5 end_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2008-Apr-24 22:21:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 22:21:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 22:21:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 22:21:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 22:21:43 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-24 22:21:43 START begin_task: Starting task 'WAPP calibration' 2008-Apr-24 22:21:43 LOG5 begin_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2008-Apr-24 22:21:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-24 22:21:43 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-24 22:21:43 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 22:21:43 LOG5 begin_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-24 22:21:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 22:21:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 22:21:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 22:21:43 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 22:21:43 LOG5 begin_task: Level: (5) ID = <10395> Status = 0 0 0 0 ok 2008-Apr-24 22:21:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 22:21:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 22:21:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 22:21:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:21:43 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 22:21:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 22:21:43 LOG5 end_task: Level: (5) ID = <10395> Status = 0 0 0 0 ok 2008-Apr-24 22:21:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 22:21:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 22:21:43 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 22:21:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 22:21:43 LOG5 begin_task: Level: (5) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-24 22:21:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:21:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0009.fits 2008-Apr-24 22:21:43 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080424.a2048.0009.fits} 2008-Apr-24 22:21:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 22:21:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 22:21:44 LOG5 end_task: Level: (5) ID = <10396> Status = 0 0 0 0 ok 2008-Apr-24 22:21:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 22:21:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 22:21:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 22:21:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 22:21:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 22:21:44 LOG5 begin_task: Level: (5) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-24 22:21:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 22:21:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 22:21:44 LOG5 end_task: Level: (5) ID = <10397> Status = 0 0 0 0 ok 2008-Apr-24 22:21:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 22:21:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 22:21:44 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 22:21:44 LOG5 finish_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-24 22:21:44 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-24 22:21:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:21:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 22:21:44 LOG5 end_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2008-Apr-24 22:21:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-24 22:21:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 22:21:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 22:21:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 22:21:44 LOG5 begin_task: Level: (4) ID = <10398> Status = 0 0 0 0 ok 2008-Apr-24 22:21:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 22:21:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 22:21:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 22:21:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 22:21:44 LOG5 end_task: Level: (4) ID = <10398> Status = 0 0 0 0 ok 2008-Apr-24 22:21:44 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-24 22:21:44 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-24 22:21:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 22:21:44 LOG5 begin_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2008-Apr-24 22:21:44 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 22:21:44 LOG5 log_alfabeam: Parameters: 12.134333333333334 7.6975555555555548 12.143644 2008.3174038583415 19.099895 2008-Apr-24 22:21:44 LOG4 log_alfabeam: ALFABEAM 0 12.134333333334894 7.697555555555553 2008-Apr-24 22:21:44 LOG4 log_alfabeam: ALFABEAM 1 12.133202677581863 7.802363376091304 2008-Apr-24 22:21:44 LOG4 log_alfabeam: ALFABEAM 2 12.128548179593663 7.733051942748814 2008-Apr-24 22:21:44 LOG4 log_alfabeam: ALFABEAM 3 12.129642300112575 7.628140569883046 2008-Apr-24 22:21:44 LOG4 log_alfabeam: ALFABEAM 4 12.135485924508155 7.592773640803657 2008-Apr-24 22:21:44 LOG4 log_alfabeam: ALFABEAM 5 12.140155120410398 7.662728874035193 2008-Apr-24 22:21:44 LOG4 log_alfabeam: ALFABEAM 6 12.138966035791404 7.767402679793344 2008-Apr-24 22:21:44 INFO2 take_spectra: Starting WAPP scan: 811500209 2008-Apr-24 22:21:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 22:21:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 22:21:45 LOG5 begin_task: Level: (5) ID = <10400> Status = 0 0 0 0 ok 2008-Apr-24 22:21:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 22:21:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8506.00 2008-Apr-24 22:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165498 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 22:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 22:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:21:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.556 > 1.4)! 2008-Apr-24 22:21:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 1.064 1.133 1.090 2008-Apr-24 22:21:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.395 1.302 1.347 1.433 2008-Apr-24 22:21:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.285 1.317 1.406 1.191 2008-Apr-24 22:21:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.416 1.406 1.553 1.556 2008-Apr-24 22:21:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 22:21:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 22:21:51 LOG5 end_task: Level: (5) ID = <10400> Status = 0 0 0 0 ok 2008-Apr-24 22:21:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 22:21:51 LOG5 end_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2008-Apr-24 22:21:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 22:21:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 22:21:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 22:21:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 22:21:51 LOG5 begin_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Apr-24 22:21:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 22:21:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 22:21:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 22:21:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 22:21:52 LOG5 end_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Apr-24 22:21:52 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-24 22:21:52 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-24 22:21:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 22:21:52 LOG5 begin_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Apr-24 22:21:52 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 22:21:52 LOG5 log_alfabeam: Parameters: 12.134333333333334 7.6975555555555548 12.145594 2008.3174040801582 19.099895 2008-Apr-24 22:21:52 LOG4 log_alfabeam: ALFABEAM 0 12.134333333333686 7.697555555555555 2008-Apr-24 22:21:52 LOG4 log_alfabeam: ALFABEAM 1 12.133221081592495 7.802406869684713 2008-Apr-24 22:21:52 LOG4 log_alfabeam: ALFABEAM 2 12.128554428344236 7.733276185153331 2008-Apr-24 22:21:52 LOG4 log_alfabeam: ALFABEAM 3 12.129630133753500 7.628322737131235 2008-Apr-24 22:21:52 LOG4 log_alfabeam: ALFABEAM 4 12.135467533682084 7.592729295915204 2008-Apr-24 22:21:52 LOG4 log_alfabeam: ALFABEAM 5 12.140148986583604 7.662503200499552 2008-Apr-24 22:21:52 LOG4 log_alfabeam: ALFABEAM 6 12.138978280912543 7.767222768007047 2008-Apr-24 22:21:52 INFO2 take_spectra: Starting WAPP scan: 811500210 2008-Apr-24 22:21:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 22:21:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 22:21:52 LOG5 begin_task: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2008-Apr-24 22:21:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 22:21:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8513.00 2008-Apr-24 22:21:57 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.556 (still bad) 2008-Apr-24 22:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165498 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 22:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 22:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:21:58 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-24 22:21:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 22:21:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 22:21:58 LOG5 end_task: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2008-Apr-24 22:21:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 22:21:58 LOG5 end_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2008-Apr-24 22:21:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 22:21:58 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-24 22:21:58 LOG5 finish_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2008-Apr-24 22:21:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-24 22:21:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:21:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-24 22:21:58 LOG5 end_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2008-Apr-24 22:21:59 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-24 22:21:59 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 0.00 and ZA = 10.70 2008-Apr-24 22:21:59 LOG3 track_source: Calling 'track_source AGESVC1A_p2_053 0.00 10.7025313337 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 22:21:59 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 22:21:59 LOG5 begin_task: Level: (3) ID = <10404> Status = 0 0 0 0 ok 2008-Apr-24 22:21:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_053} INFO {Slewing to source 'AGESVC1A_p2_053' ...} 2008-Apr-24 22:21:59 INFO1 track_source: Starting to track AGESVC1A_p2_053 2008-Apr-24 22:21:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_053" 2008-Apr-24 22:21:59 LOG3 vw_send: To DATATAKING: set ra 0.00 2008-Apr-24 22:21:59 LOG3 vw_send: To DATATAKING: set dec 10.7025313337 2008-Apr-24 22:21:59 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 22:21:59 LOG3 vw_send: To DATATAKING: pnt tr 0.00 10.7025313337 -CF 2008-Apr-24 22:21:59 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 22:21:59 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 22:21:59 LOG5 finish_task: Level: (3) ID = <10404> Status = 0 0 0 0 ok 2008-Apr-24 22:21:59 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 22:21:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:21:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 22:21:59 LOG5 end_task: Level: (3) ID = <10404> Status = 0 0 0 0 ok 2008-Apr-24 22:21:59 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 12:09:27.2 LST = 12:08:51.2 diff = 36.0 secs 2008-Apr-24 22:21:59 INFO2 fixed_driftmap: Waiting 34 seconds for RA 12:09:27 2008-Apr-24 22:21:59 INFO2 lstwait: Waiting for 33.9 secs from LST 12:08:51 to LST 12:09:25 ... 2008-Apr-24 22:21:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 33.923119322882108 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 22:21:59 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-24 22:21:59 LOG5 begin_task: Level: (3) ID = <10405> Status = 0 0 0 0 ok 2008-Apr-24 22:21:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_053" 2008-Apr-24 22:21:59 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2008-Apr-24 22:21:59 LOG4 got_cormsg: From DATATAKING: set dec 10.7025313337 2008-Apr-24 22:21:59 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2008-Apr-24 22:21:59 LOG4 got_cormsg: From DATATAKING: vw% 10.7025313337 2008-Apr-24 22:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:21:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 22:21:59 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 10.7025313337 -CF 2008-Apr-24 22:21:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 22:21:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 22:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:22:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.134 2008-Apr-24 22:22:33 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-24 22:22:33 LOG5 end_task: Level: (3) ID = <10405> Status = 0 0 0 0 ok 2008-Apr-24 22:22:33 LOG4 lstwait: Finished waiting, the gui caused difference: 0.07600340000237793 2008-Apr-24 22:22:33 INFO3 lstwait: Finished waiting 2008-Apr-24 22:22:33 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 22:22:33 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-24 22:22:33 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 22:22:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-24 22:22:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-24 22:22:33 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-24 22:22:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 22:22:33 LOG5 begin_task: Level: (3) ID = <10406> Status = 0 0 0 0 ok 2008-Apr-24 22:22:33 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-24 22:22:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-24 22:22:33 INFO2 take_spectra: Starting WAPP scan: 811500211 2008-Apr-24 22:22:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-24 22:22:33 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 22:22:33 LOG5 begin_task: Level: (4) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-24 22:22:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 22:22:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8554.00 2008-Apr-24 22:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165498 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 22:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 22:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165498 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:23:23 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:23:23.298 (seconds: 80603.298)!} 2008-Apr-24 22:23:23 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:23:23.298 (seconds: 80603.298)! 2008-Apr-24 22:23:24 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 80602.0 to 80603.0! 2008-Apr-24 22:23:25 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (80602.0 - 80604.0)! 2008-Apr-24 22:42:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 22:42:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 22:42:34 LOG5 end_task: Level: (4) ID = <10407> Status = 0 0 0 0 ok 2008-Apr-24 22:42:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 22:42:34 LOG5 end_task: Level: (3) ID = <10406> Status = 0 0 0 0 ok 2008-Apr-24 22:42:34 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-24 22:42:34 LOG5 finish_task: Level: (2) ID = <10373> Status = 0 0 0 0 ok 2008-Apr-24 22:42:34 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-24 22:42:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 22:42:34 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-24 22:42:34 LOG5 end_task: Level: (2) ID = <10373> Status = 0 0 0 0 ok 2008-Apr-24 22:42:34 COMMAND run_command_line: EXECUTING command 43: 'FIXEDDRIFT az=28.23 alfaangle=-4.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_055 ra=120900.00 dec=73900.00' 2008-Apr-24 22:42:34 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-24 22:42:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 22:42:35 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 28.23 -4.4 hcorcal 5 tracking no first 1 AGESVC1A_p2_055 120900.00 73900.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 22:42:35 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-24 22:42:35 LOG5 begin_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2008-Apr-24 22:42:35 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_053' 2008-Apr-24 22:42:35 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-24 22:42:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_055} 2008-Apr-24 22:42:35 INFO3 fixed_driftmap: Sending telescope to Az = 28.23 and ZA = 12.12 2008-Apr-24 22:42:35 LOG3 track_source: Calling 'track_source AGESVC1A_p2_055 28.23 12.1206877060 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 22:42:35 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 22:42:35 LOG5 begin_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Apr-24 22:42:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_055} INFO {Slewing to source 'AGESVC1A_p2_055' ...} 2008-Apr-24 22:42:35 INFO1 track_source: Starting to track AGESVC1A_p2_055 2008-Apr-24 22:42:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_055" 2008-Apr-24 22:42:35 LOG3 vw_send: To DATATAKING: set ra 28.23 2008-Apr-24 22:42:35 LOG3 vw_send: To DATATAKING: set dec 12.1206877060 2008-Apr-24 22:42:35 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 22:42:35 LOG3 vw_send: To DATATAKING: pnt tr 28.23 12.1206877060 -CF 2008-Apr-24 22:42:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 22:42:35 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 22:42:35 LOG5 finish_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Apr-24 22:42:35 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 22:42:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:42:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 22:42:35 LOG5 end_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Apr-24 22:42:35 START begin_task: Starting task 'rotate ALFA to -4.4 degrees' 2008-Apr-24 22:42:35 LOG5 begin_task: Level: (3) ID = <10410> Status = 0 0 0 0 ok 2008-Apr-24 22:42:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -4.4 degrees ...} 2008-Apr-24 22:42:35 INFO2 rotate_alfa: ALFA commanded to -4.4 degrees 2008-Apr-24 22:42:35 LOG3 sock_errsend: To ALFAMOTOR: POSITION -4.4 REPLY 2008-Apr-24 22:42:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 22:42:35 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 22:42:35 LOG5 begin_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-24 22:42:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_055" 2008-Apr-24 22:42:35 LOG4 got_cormsg: From DATATAKING: set ra 28.23 2008-Apr-24 22:42:35 LOG4 got_cormsg: From DATATAKING: set dec 12.1206877060 2008-Apr-24 22:42:35 LOG4 got_cormsg: From DATATAKING: vw% 28.23 2008-Apr-24 22:42:35 LOG4 got_cormsg: From DATATAKING: vw% 12.1206877060 2008-Apr-24 22:42:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:42:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 22:42:35 LOG4 got_cormsg: From DATATAKING: pnt tr 28.23 12.1206877060 -CF 2008-Apr-24 22:42:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 22:42:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 22:42:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:42:50 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 22:42:50 INFO3 alfa_motor: ALFA rotator in-position -4.40 degrees 2008-Apr-24 22:42:50 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 22:42:50 LOG5 end_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2008-Apr-24 22:42:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 22:42:50 STOP finish_task: Finishing task 'rotate ALFA to -4.4 degrees' 2008-Apr-24 22:42:50 LOG5 finish_task: Level: (3) ID = <10410> Status = 0 0 0 0 ok 2008-Apr-24 22:42:50 INFO2 finish_task: DONE finished configuration: rotating ALFA to -4.4 degrees 2008-Apr-24 22:42:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:42:50 STOP end_task: Finishing task 'rotate ALFA to -4.4 degrees' with status 'OK' 2008-Apr-24 22:42:50 LOG5 end_task: Level: (3) ID = <10410> Status = 0 0 0 0 ok 2008-Apr-24 22:42:50 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 22:42:50 LOG5 begin_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-24 22:42:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 22:42:50 LOG3 waittrk: Start waittrk 5 2008-Apr-24 22:42:50 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 22:42:50 LOG5 begin_task: Level: (4) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-24 22:42:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 22:42:55 LOG5 end_task: Level: (4) ID = <10413> Status = 0 0 0 0 ok 2008-Apr-24 22:42:55 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 22:42:55 LOG5 begin_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Apr-24 22:43:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 22:43:59 LOG5 end_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Apr-24 22:43:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 22:43:59 INFO2 waittrk: Now tracking AGESVC1A_p2_055 2008-Apr-24 22:43:59 LOG4 waittrk: Current telescope position: Az = 387.96 ZA = 12.09 2008-Apr-24 22:43:59 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 22:43:59 LOG5 finish_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-24 22:43:59 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 22:43:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:43:59 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 22:43:59 LOG5 end_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Apr-24 22:43:59 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 22:43:59 LOG5 begin_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-24 22:43:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 22:43:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 22:43:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 22:43:59 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 22:43:59 LOG5 begin_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2008-Apr-24 22:43:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 22:43:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 22:44:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:44:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 22:44:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 22:44:00 LOG5 end_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2008-Apr-24 22:44:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 22:44:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 22:44:00 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 22:44:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 22:44:00 LOG5 begin_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2008-Apr-24 22:44:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:44:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 22:44:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 22:44:00 LOG5 end_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2008-Apr-24 22:44:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 22:44:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 22:44:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 22:44:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 22:44:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 22:44:00 LOG5 begin_task: Level: (4) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-24 22:44:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 22:44:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 22:44:00 LOG5 end_task: Level: (4) ID = <10418> Status = 0 0 0 0 ok 2008-Apr-24 22:44:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 22:44:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 22:44:00 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 22:44:00 LOG5 finish_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-24 22:44:00 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 22:44:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:44:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 22:44:00 LOG5 end_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Apr-24 22:44:00 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-24 22:44:00 INFO2 astwait: Waiting for 30 seconds from 02:44:00 to 02:44:30 UTC ... 2008-Apr-24 22:44:00 LOG4 send_obs_status: To obs_status: <1> TASKTIME 30 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 22:44:00 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-24 22:44:00 LOG5 begin_task: Level: (3) ID = <10419> Status = 0 0 0 0 ok 2008-Apr-24 22:44:30 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-24 22:44:30 LOG5 end_task: Level: (3) ID = <10419> Status = 0 0 0 0 ok 2008-Apr-24 22:44:30 INFO3 astwait: Finished waiting 2008-Apr-24 22:44:30 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 22:44:30 LOG5 dopset_later: Calling 'dopset_later 61.309594324073196' 2008-Apr-24 22:44:30 INFO3 dopset_later: Setting Doppler correction for 22:45:30 (61.3 seconds from now) 2008-Apr-24 22:44:30 LOG5 antvel: Calling 'antvel 28.230000 12.120688 F 61.309594324073196' 2008-Apr-24 22:44:30 LOG2 antvel: Parameters to Doppler: Heliocentric 96330 2008 115 0.0 2008-Apr-24 22:44:30 INFO5 antvel: Computed antenna velocity: +16.95924 km/s 2008-Apr-24 22:44:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=16.959236928500001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-24 22:44:30 INFO4 dopset_gen: New sky frequencies: 1381.165296 1381.165296 1381.165296 1381.165296 1381.165296 1381.165296 1381.165296 1381.165296 1381.165296 2008-Apr-24 22:44:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.165296 sky0=1381.165296 sky1=1381.165296 sky2=1381.165296 sky3=1381.165296 sky4=1381.165296 sky5=1381.165296 sky6=1381.165296 sky7=1381.165296 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 22:44:30 LOG2 dopset_gen: Result from 'sky2syn': 1631.165296 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 22:44:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631165296.0} 2008-Apr-24 22:44:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 22:44:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-24 22:44:30 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-24 22:44:30 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.2 Dec = +07:38:51.2 2008-Apr-24 22:44:30 LOG3 track_source: Calling 'track_source AGESVC1A_p2_055 120803.2 073851.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 22:44:30 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 22:44:30 LOG5 begin_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2008-Apr-24 22:44:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_055} INFO {Slewing to source 'AGESVC1A_p2_055' ...} 2008-Apr-24 22:44:30 INFO1 track_source: Starting to track AGESVC1A_p2_055 2008-Apr-24 22:44:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_055" 2008-Apr-24 22:44:30 LOG3 vw_send: To DATATAKING: set ra 120803.2 2008-Apr-24 22:44:30 LOG3 vw_send: To DATATAKING: set dec 073851.2 2008-Apr-24 22:44:30 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 22:44:30 LOG3 vw_send: To DATATAKING: pnt tr 120803.2 073851.2 -CJ 2008-Apr-24 22:44:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 22:44:30 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 22:44:30 LOG5 finish_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2008-Apr-24 22:44:30 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 22:44:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:44:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 22:44:30 LOG5 end_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2008-Apr-24 22:44:30 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 22:44:30 LOG5 begin_task: Level: (3) ID = <10421> Status = 0 0 0 0 ok 2008-Apr-24 22:44:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 22:44:30 LOG3 waittrk: Start waittrk 5 2008-Apr-24 22:44:30 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 22:44:30 LOG5 begin_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631165296.0} 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_055" 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: set ra 120803.2 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: set dec 073851.2 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: vw% 120803.2 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: vw% 073851.2 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.2 073851.2 -CJ 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 22:44:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:44:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 22:44:35 LOG5 end_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2008-Apr-24 22:44:35 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 22:44:35 LOG5 begin_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-24 22:44:37 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 22:44:37 LOG5 end_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2008-Apr-24 22:44:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 22:44:37 INFO2 waittrk: Now tracking AGESVC1A_p2_055 2008-Apr-24 22:44:37 LOG4 waittrk: Current telescope position: Az = 388.02 ZA = 12.10 2008-Apr-24 22:44:37 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 22:44:37 LOG5 finish_task: Level: (3) ID = <10421> Status = 0 0 0 0 ok 2008-Apr-24 22:44:37 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 22:44:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:44:37 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 22:44:37 LOG5 end_task: Level: (3) ID = <10421> Status = 0 0 0 0 ok 2008-Apr-24 22:44:37 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 22:44:37 LOG5 begin_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-24 22:44:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 22:44:37 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 22:44:37 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 22:44:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 22:44:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 22:44:37 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 22:44:37 LOG5 begin_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Apr-24 22:44:37 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 22:44:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 22:44:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:44:38 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 22:44:38 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 22:44:38 LOG5 end_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Apr-24 22:44:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 22:44:38 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 22:44:38 LOG5 begin_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Apr-24 22:44:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 22:44:38 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 22:44:38 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 22:44:38 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 22:44:38 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 22:44:38 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 22:44:38 LOG5 begin_task: Level: (5) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-24 22:44:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 22:44:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:44:38 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 2 dB --- beam 1: 8 6 dB 2008-Apr-24 22:44:38 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-24 22:44:38 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-24 22:44:38 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-24 22:44:38 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 22:44:38 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 22:44:38 LOG5 end_task: Level: (5) ID = <10427> Status = 0 0 0 0 ok 2008-Apr-24 22:44:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.931 0.928 ALFA beam 1: 0.888 1.067 2008-Apr-24 22:44:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.036 0.953 ALFA beam 3: 0.993 1.058 2008-Apr-24 22:44:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.935 0.957 ALFA beam 5: 1.035 0.896 2008-Apr-24 22:44:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.052 1.037 ALFA beam 7: 0.924 0.921 2008-Apr-24 22:44:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 22:44:38 LOG5 finish_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Apr-24 22:44:38 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 22:44:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:44:38 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 22:44:38 LOG5 end_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Apr-24 22:44:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 22:44:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 22:44:38 LOG5 finish_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-24 22:44:38 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 22:44:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:44:38 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 22:44:38 LOG5 end_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Apr-24 22:44:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 22:44:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 22:44:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 22:44:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 22:44:38 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-24 22:44:38 START begin_task: Starting task 'WAPP calibration' 2008-Apr-24 22:44:38 LOG5 begin_task: Level: (3) ID = <10428> Status = 0 0 0 0 ok 2008-Apr-24 22:44:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-24 22:44:39 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-24 22:44:39 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 22:44:39 LOG5 begin_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-24 22:44:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 22:44:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 22:44:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 22:44:39 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 22:44:39 LOG5 begin_task: Level: (5) ID = <10430> Status = 0 0 0 0 ok 2008-Apr-24 22:44:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 22:44:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 22:44:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 22:44:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:44:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 22:44:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 22:44:39 LOG5 end_task: Level: (5) ID = <10430> Status = 0 0 0 0 ok 2008-Apr-24 22:44:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 22:44:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 22:44:39 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 22:44:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 22:44:39 LOG5 begin_task: Level: (5) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-24 22:44:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:44:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 22:44:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 22:44:39 LOG5 end_task: Level: (5) ID = <10431> Status = 0 0 0 0 ok 2008-Apr-24 22:44:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 22:44:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 22:44:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 22:44:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 22:44:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 22:44:39 LOG5 begin_task: Level: (5) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-24 22:44:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0010.fits 2008-Apr-24 22:44:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 22:44:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 22:44:39 LOG5 end_task: Level: (5) ID = <10432> Status = 0 0 0 0 ok 2008-Apr-24 22:44:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 22:44:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 22:44:39 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 22:44:39 LOG5 finish_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-24 22:44:39 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-24 22:44:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:44:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 22:44:39 LOG5 end_task: Level: (4) ID = <10429> Status = 0 0 0 0 ok 2008-Apr-24 22:44:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-24 22:44:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 22:44:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 22:44:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 22:44:39 LOG5 begin_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2008-Apr-24 22:44:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080424.a2048.0010.fits} 2008-Apr-24 22:44:39 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 22:44:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 22:44:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 22:44:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 22:44:39 LOG5 end_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2008-Apr-24 22:44:39 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-24 22:44:39 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-24 22:44:39 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 22:44:39 LOG5 begin_task: Level: (4) ID = <10434> Status = 0 0 0 0 ok 2008-Apr-24 22:44:39 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 22:44:39 LOG5 log_alfabeam: Parameters: 12.13422222222222 7.6475555555555541 12.526634 2008.3174474294624 -4.400012 2008-Apr-24 22:44:39 LOG4 log_alfabeam: ALFABEAM 0 12.134222222222222 7.647555555555555 2008-Apr-24 22:44:39 LOG4 log_alfabeam: ALFABEAM 1 12.133846145617801 7.749353523729623 2008-Apr-24 22:44:39 LOG4 log_alfabeam: ALFABEAM 2 12.128518473031704 7.682031576014655 2008-Apr-24 22:44:39 LOG4 log_alfabeam: ALFABEAM 3 12.128897903214716 7.580031966332629 2008-Apr-24 22:44:39 LOG4 log_alfabeam: ALFABEAM 4 12.134648936602524 7.545614728695655 2008-Apr-24 22:44:39 LOG4 log_alfabeam: ALFABEAM 5 12.139938428286630 7.613718209969626 2008-Apr-24 22:44:39 LOG4 log_alfabeam: ALFABEAM 6 12.139515146300063 7.715457839251100 2008-Apr-24 22:44:39 INFO2 take_spectra: Starting WAPP scan: 811500212 2008-Apr-24 22:44:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 22:44:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 22:44:40 LOG5 begin_task: Level: (5) ID = <10435> Status = 0 0 0 0 ok 2008-Apr-24 22:44:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 22:44:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9881.00 2008-Apr-24 22:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165296 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 22:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 22:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:44:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 22:44:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.447 > 1.4)! 2008-Apr-24 22:44:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.278 1.193 1.203 1.447 2008-Apr-24 22:44:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 0.953 0.993 1.058 2008-Apr-24 22:44:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.957 1.035 0.896 2008-Apr-24 22:44:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 1.037 0.924 0.921 2008-Apr-24 22:44:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 22:44:46 LOG5 end_task: Level: (5) ID = <10435> Status = 0 0 0 0 ok 2008-Apr-24 22:44:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 22:44:46 LOG5 end_task: Level: (4) ID = <10434> Status = 0 0 0 0 ok 2008-Apr-24 22:44:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 22:44:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 22:44:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 22:44:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 22:44:46 LOG5 begin_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Apr-24 22:44:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 22:44:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 22:44:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 22:44:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 22:44:47 LOG5 end_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Apr-24 22:44:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-24 22:44:47 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-24 22:44:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 22:44:47 LOG5 begin_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Apr-24 22:44:47 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 22:44:47 LOG5 log_alfabeam: Parameters: 12.13422222222222 7.6475555555555541 12.528584 2008.3174476512788 -4.400012 2008-Apr-24 22:44:47 LOG4 log_alfabeam: ALFABEAM 0 12.134222222222222 7.647555555555548 2008-Apr-24 22:44:47 LOG4 log_alfabeam: ALFABEAM 1 12.133859996890685 7.749364726763324 2008-Apr-24 22:44:47 LOG4 log_alfabeam: ALFABEAM 2 12.128523175578655 7.682202967293555 2008-Apr-24 22:44:47 LOG4 log_alfabeam: ALFABEAM 3 12.128888729226420 7.580192281400194 2008-Apr-24 22:44:47 LOG4 log_alfabeam: ALFABEAM 4 12.134635015427333 7.545602162093819 2008-Apr-24 22:44:47 LOG4 log_alfabeam: ALFABEAM 5 12.139933796132409 7.613545707863253 2008-Apr-24 22:44:47 LOG4 log_alfabeam: ALFABEAM 6 12.139524409914628 7.715298027281867 2008-Apr-24 22:44:47 INFO2 take_spectra: Starting WAPP scan: 811500213 2008-Apr-24 22:44:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 22:44:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 22:44:47 LOG5 begin_task: Level: (5) ID = <10438> Status = 0 0 0 0 ok 2008-Apr-24 22:44:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 22:44:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9888.00 2008-Apr-24 22:44:52 INFO5 check_wapp_levels: WAPP power levels are between 1.193 and 1.462 (still bad) 2008-Apr-24 22:44:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165296 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 22:44:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:44:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:44:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 22:44:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:44:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:44:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:44:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:44:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:44:53 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-24 22:44:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 22:44:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 22:44:53 LOG5 end_task: Level: (5) ID = <10438> Status = 0 0 0 0 ok 2008-Apr-24 22:44:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 22:44:53 LOG5 end_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Apr-24 22:44:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 22:44:53 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-24 22:44:53 LOG5 finish_task: Level: (3) ID = <10428> Status = 0 0 0 0 ok 2008-Apr-24 22:44:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-24 22:44:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:44:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-24 22:44:53 LOG5 end_task: Level: (3) ID = <10428> Status = 0 0 0 0 ok 2008-Apr-24 22:44:54 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-24 22:44:54 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 28.23 and ZA = 12.12 2008-Apr-24 22:44:54 LOG3 track_source: Calling 'track_source AGESVC1A_p2_055 28.23 12.1206877060 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 22:44:54 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 22:44:54 LOG5 begin_task: Level: (3) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-24 22:44:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_055} INFO {Slewing to source 'AGESVC1A_p2_055' ...} 2008-Apr-24 22:44:54 INFO1 track_source: Starting to track AGESVC1A_p2_055 2008-Apr-24 22:44:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_055" 2008-Apr-24 22:44:54 LOG3 vw_send: To DATATAKING: set ra 28.23 2008-Apr-24 22:44:54 LOG3 vw_send: To DATATAKING: set dec 12.1206877060 2008-Apr-24 22:44:54 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 22:44:54 LOG3 vw_send: To DATATAKING: pnt tr 28.23 12.1206877060 -CF 2008-Apr-24 22:44:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 22:44:54 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 22:44:54 LOG5 finish_task: Level: (3) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-24 22:44:54 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 22:44:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 22:44:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 22:44:54 LOG5 end_task: Level: (3) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-24 22:44:54 LOG1 fixed_driftmap: Parameters: HA = +00:23:00.2 Start = 12:32:27.3 LST = 12:31:49.9 diff = 37.4 secs 2008-Apr-24 22:44:54 INFO2 fixed_driftmap: Waiting 35.4 seconds for RA 12:09:27 2008-Apr-24 22:44:54 INFO2 lstwait: Waiting for 35.3 secs from LST 12:31:50 to LST 12:32:25 ... 2008-Apr-24 22:44:54 LOG4 send_obs_status: To obs_status: <1> TASKTIME 35.314764930475889 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 22:44:54 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-24 22:44:54 LOG5 begin_task: Level: (3) ID = <10440> Status = 0 0 0 0 ok 2008-Apr-24 22:44:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_055" 2008-Apr-24 22:44:54 LOG4 got_cormsg: From DATATAKING: set ra 28.23 2008-Apr-24 22:44:54 LOG4 got_cormsg: From DATATAKING: set dec 12.1206877060 2008-Apr-24 22:44:54 LOG4 got_cormsg: From DATATAKING: vw% 28.23 2008-Apr-24 22:44:54 LOG4 got_cormsg: From DATATAKING: vw% 12.1206877060 2008-Apr-24 22:44:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:44:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 22:44:54 LOG4 got_cormsg: From DATATAKING: pnt tr 28.23 12.1206877060 -CF 2008-Apr-24 22:44:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 22:44:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 22:44:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 22:44:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.068 2008-Apr-24 22:45:29 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-24 22:45:29 LOG5 end_task: Level: (3) ID = <10440> Status = 0 0 0 0 ok 2008-Apr-24 22:45:29 LOG4 lstwait: Finished waiting, the gui caused difference: 0.68574764000359778 2008-Apr-24 22:45:29 INFO3 lstwait: Finished waiting 2008-Apr-24 22:45:29 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 22:45:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-24 22:45:29 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 22:45:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-24 22:45:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-24 22:45:29 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-24 22:45:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 22:45:29 LOG5 begin_task: Level: (3) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-24 22:45:29 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-24 22:45:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-24 22:45:29 INFO2 take_spectra: Starting WAPP scan: 811500214 2008-Apr-24 22:45:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-24 22:45:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 22:45:30 LOG5 begin_task: Level: (4) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-24 22:45:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 22:45:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9931.00 2008-Apr-24 22:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165296 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 22:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 22:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 22:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165296 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 22:51:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.747 < 0.8)! 2008-Apr-24 22:51:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.747 0.898 1.082 2008-Apr-24 22:51:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.953 0.996 1.058 2008-Apr-24 22:51:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.941 0.965 1.036 0.898 2008-Apr-24 22:51:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 1.038 0.925 0.923 2008-Apr-24 22:51:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.828 and 1.084 2008-Apr-24 22:53:21 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:53:21.298 (seconds: 82401.298)!} 2008-Apr-24 22:53:21 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:53:21.298 (seconds: 82401.298)! 2008-Apr-24 22:53:22 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 82400.0 to 82401.0! 2008-Apr-24 22:53:23 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (82400.0 - 82402.0)! 2008-Apr-24 23:05:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:05:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 23:05:31 LOG5 end_task: Level: (4) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-24 23:05:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 23:05:31 LOG5 end_task: Level: (3) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-24 23:05:31 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-24 23:05:31 LOG5 finish_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2008-Apr-24 23:05:31 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-24 23:05:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 23:05:31 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-24 23:05:31 LOG5 end_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2008-Apr-24 23:05:31 COMMAND run_command_line: EXECUTING command 47: 'FIXEDDRIFT az=47.49 alfaangle=-21.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_057 ra=120900.00 dec=73600.00' 2008-Apr-24 23:05:31 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-24 23:05:32 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 23:05:32 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 47.49 -21.4 hcorcal 5 tracking no first 1 AGESVC1A_p2_057 120900.00 73600.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 23:05:32 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-24 23:05:32 LOG5 begin_task: Level: (2) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-24 23:05:32 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_055' 2008-Apr-24 23:05:32 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-24 23:05:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_057} 2008-Apr-24 23:05:32 INFO3 fixed_driftmap: Sending telescope to Az = 47.49 and ZA = 15.55 2008-Apr-24 23:05:32 LOG3 track_source: Calling 'track_source AGESVC1A_p2_057 47.49 15.5511075602 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 23:05:32 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 23:05:32 LOG5 begin_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-24 23:05:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_057} INFO {Slewing to source 'AGESVC1A_p2_057' ...} 2008-Apr-24 23:05:32 INFO1 track_source: Starting to track AGESVC1A_p2_057 2008-Apr-24 23:05:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_057" 2008-Apr-24 23:05:32 LOG3 vw_send: To DATATAKING: set ra 47.49 2008-Apr-24 23:05:32 LOG3 vw_send: To DATATAKING: set dec 15.5511075602 2008-Apr-24 23:05:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 23:05:32 LOG3 vw_send: To DATATAKING: pnt tr 47.49 15.5511075602 -CF 2008-Apr-24 23:05:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 23:05:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 23:05:32 LOG5 finish_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-24 23:05:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 23:05:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:05:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 23:05:32 LOG5 end_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-24 23:05:32 START begin_task: Starting task 'rotate ALFA to -21.4 degrees' 2008-Apr-24 23:05:32 LOG5 begin_task: Level: (3) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-24 23:05:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -21.4 degrees ...} 2008-Apr-24 23:05:32 INFO2 rotate_alfa: ALFA commanded to -21.4 degrees 2008-Apr-24 23:05:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION -21.4 REPLY 2008-Apr-24 23:05:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 23:05:32 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 23:05:32 LOG5 begin_task: Level: (4) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-24 23:05:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_057" 2008-Apr-24 23:05:32 LOG4 got_cormsg: From DATATAKING: set ra 47.49 2008-Apr-24 23:05:32 LOG4 got_cormsg: From DATATAKING: set dec 15.5511075602 2008-Apr-24 23:05:32 LOG4 got_cormsg: From DATATAKING: vw% 47.49 2008-Apr-24 23:05:32 LOG4 got_cormsg: From DATATAKING: vw% 15.5511075602 2008-Apr-24 23:05:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:05:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 23:05:32 LOG4 got_cormsg: From DATATAKING: pnt tr 47.49 15.5511075602 -CF 2008-Apr-24 23:05:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 23:05:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 23:05:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:05:43 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 23:05:43 INFO3 alfa_motor: ALFA rotator in-position -21.40 degrees 2008-Apr-24 23:05:43 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 23:05:43 LOG5 end_task: Level: (4) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-24 23:05:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 23:05:43 STOP finish_task: Finishing task 'rotate ALFA to -21.4 degrees' 2008-Apr-24 23:05:43 LOG5 finish_task: Level: (3) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-24 23:05:43 INFO2 finish_task: DONE finished configuration: rotating ALFA to -21.4 degrees 2008-Apr-24 23:05:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:05:43 STOP end_task: Finishing task 'rotate ALFA to -21.4 degrees' with status 'OK' 2008-Apr-24 23:05:43 LOG5 end_task: Level: (3) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-24 23:05:43 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 23:05:43 LOG5 begin_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-24 23:05:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 23:05:43 LOG3 waittrk: Start waittrk 5 2008-Apr-24 23:05:43 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 23:05:43 LOG5 begin_task: Level: (4) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-24 23:05:48 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 23:05:48 LOG5 end_task: Level: (4) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-24 23:05:48 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 23:05:48 LOG5 begin_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-24 23:07:04 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 23:07:04 LOG5 end_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-24 23:07:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 23:07:04 INFO2 waittrk: Now tracking AGESVC1A_p2_057 2008-Apr-24 23:07:04 LOG4 waittrk: Current telescope position: Az = 407.27 ZA = 15.54 2008-Apr-24 23:07:04 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 23:07:04 LOG5 finish_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-24 23:07:04 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 23:07:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:07:04 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 23:07:04 LOG5 end_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-24 23:07:04 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 23:07:04 LOG5 begin_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-24 23:07:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 23:07:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 23:07:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:07:04 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 23:07:04 LOG5 begin_task: Level: (4) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-24 23:07:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 23:07:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:07:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:07:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 23:07:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 23:07:05 LOG5 end_task: Level: (4) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-24 23:07:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 23:07:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 23:07:05 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 23:07:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 23:07:05 LOG5 begin_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-24 23:07:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:07:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 23:07:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 23:07:06 LOG5 end_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-24 23:07:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 23:07:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 23:07:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 23:07:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 23:07:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 23:07:06 LOG5 begin_task: Level: (4) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-24 23:07:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 23:07:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 23:07:06 LOG5 end_task: Level: (4) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-24 23:07:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 23:07:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 23:07:06 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 23:07:06 LOG5 finish_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-24 23:07:06 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 23:07:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:07:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 23:07:06 LOG5 end_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-24 23:07:06 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-24 23:07:06 INFO2 astwait: Waiting for 20 seconds from 03:07:06 to 03:07:26 UTC ... 2008-Apr-24 23:07:06 LOG4 send_obs_status: To obs_status: <1> TASKTIME 20 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 23:07:06 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-24 23:07:06 LOG5 begin_task: Level: (3) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-24 23:07:26 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-24 23:07:26 LOG5 end_task: Level: (3) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-24 23:07:26 INFO3 astwait: Finished waiting 2008-Apr-24 23:07:26 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 23:07:26 LOG5 dopset_later: Calling 'dopset_later 61.26669214490073' 2008-Apr-24 23:07:26 INFO3 dopset_later: Setting Doppler correction for 23:08:26 (61.3 seconds from now) 2008-Apr-24 23:07:26 LOG5 antvel: Calling 'antvel 47.490000 15.551108 F 61.26669214490073' 2008-Apr-24 23:07:26 LOG2 antvel: Parameters to Doppler: Heliocentric 97706 2008 115 0.0 2008-Apr-24 23:07:26 INFO5 antvel: Computed antenna velocity: +17.00251 km/s 2008-Apr-24 23:07:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.0025113439 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-24 23:07:26 INFO4 dopset_gen: New sky frequencies: 1381.165097 1381.165097 1381.165097 1381.165097 1381.165097 1381.165097 1381.165097 1381.165097 1381.165097 2008-Apr-24 23:07:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.165097 sky0=1381.165097 sky1=1381.165097 sky2=1381.165097 sky3=1381.165097 sky4=1381.165097 sky5=1381.165097 sky6=1381.165097 sky7=1381.165097 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:07:26 LOG2 dopset_gen: Result from 'sky2syn': 1631.165097 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:07:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631165097.0} 2008-Apr-24 23:07:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:07:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-24 23:07:26 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-24 23:07:26 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.2 Dec = +07:35:51.2 2008-Apr-24 23:07:26 LOG3 track_source: Calling 'track_source AGESVC1A_p2_057 120803.2 073551.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 23:07:26 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 23:07:26 LOG5 begin_task: Level: (3) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-24 23:07:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_057} INFO {Slewing to source 'AGESVC1A_p2_057' ...} 2008-Apr-24 23:07:26 INFO1 track_source: Starting to track AGESVC1A_p2_057 2008-Apr-24 23:07:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_057" 2008-Apr-24 23:07:26 LOG3 vw_send: To DATATAKING: set ra 120803.2 2008-Apr-24 23:07:26 LOG3 vw_send: To DATATAKING: set dec 073551.2 2008-Apr-24 23:07:26 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 23:07:26 LOG3 vw_send: To DATATAKING: pnt tr 120803.2 073551.2 -CJ 2008-Apr-24 23:07:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 23:07:26 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 23:07:26 LOG5 finish_task: Level: (3) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-24 23:07:26 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 23:07:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:07:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 23:07:26 LOG5 end_task: Level: (3) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-24 23:07:26 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 23:07:26 LOG5 begin_task: Level: (3) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-24 23:07:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 23:07:26 LOG3 waittrk: Start waittrk 5 2008-Apr-24 23:07:26 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 23:07:26 LOG5 begin_task: Level: (4) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631165097.0} 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_057" 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: set ra 120803.2 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: set dec 073551.2 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: 120803.2 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: vw% 073551.2 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.2 073551.2 -CJ 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 23:07:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:07:31 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 23:07:31 LOG5 end_task: Level: (4) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-24 23:07:31 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 23:07:31 LOG5 begin_task: Level: (4) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-24 23:07:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 23:07:33 LOG5 end_task: Level: (4) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-24 23:07:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 23:07:33 INFO2 waittrk: Now tracking AGESVC1A_p2_057 2008-Apr-24 23:07:33 LOG4 waittrk: Current telescope position: Az = 407.30 ZA = 15.55 2008-Apr-24 23:07:33 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 23:07:33 LOG5 finish_task: Level: (3) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-24 23:07:33 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 23:07:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:07:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 23:07:33 LOG5 end_task: Level: (3) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-24 23:07:33 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 23:07:33 LOG5 begin_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-24 23:07:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 23:07:33 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 23:07:33 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 23:07:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 23:07:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:07:33 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 23:07:33 LOG5 begin_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-24 23:07:33 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 23:07:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:07:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:07:34 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 23:07:34 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 23:07:34 LOG5 end_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-24 23:07:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 23:07:34 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 23:07:34 LOG5 begin_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-24 23:07:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 23:07:34 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 23:07:34 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 23:07:34 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 23:07:34 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 23:07:34 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 23:07:34 LOG5 begin_task: Level: (5) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-24 23:07:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:07:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 23:07:34 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 8 6 dB 2008-Apr-24 23:07:34 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-24 23:07:34 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-24 23:07:34 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-24 23:07:34 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 23:07:34 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 23:07:34 LOG5 end_task: Level: (5) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-24 23:07:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.963 0.922 ALFA beam 1: 0.908 1.077 2008-Apr-24 23:07:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.071 0.988 ALFA beam 3: 1.067 1.120 2008-Apr-24 23:07:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.979 1.008 ALFA beam 5: 1.083 0.937 2008-Apr-24 23:07:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.103 1.080 ALFA beam 7: 0.967 0.959 2008-Apr-24 23:07:34 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 23:07:34 LOG5 finish_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-24 23:07:34 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 23:07:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:07:34 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 23:07:34 LOG5 end_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-24 23:07:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 23:07:34 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 23:07:34 LOG5 finish_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-24 23:07:34 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 23:07:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:07:34 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 23:07:34 LOG5 end_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-24 23:07:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:07:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:07:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:07:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:07:35 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-24 23:07:35 START begin_task: Starting task 'WAPP calibration' 2008-Apr-24 23:07:35 LOG5 begin_task: Level: (3) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-24 23:07:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-24 23:07:35 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-24 23:07:35 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 23:07:35 LOG5 begin_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-24 23:07:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 23:07:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 23:07:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:07:35 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 23:07:35 LOG5 begin_task: Level: (5) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-24 23:07:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 23:07:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 23:07:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:07:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:07:35 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 23:07:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 23:07:35 LOG5 end_task: Level: (5) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-24 23:07:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 23:07:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 23:07:35 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 23:07:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 23:07:35 LOG5 begin_task: Level: (5) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-24 23:07:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:07:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 23:07:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 23:07:35 LOG5 end_task: Level: (5) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-24 23:07:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 23:07:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 23:07:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 23:07:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 23:07:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 23:07:35 LOG5 begin_task: Level: (5) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-24 23:07:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0011.fits 2008-Apr-24 23:07:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 23:07:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 23:07:35 LOG5 end_task: Level: (5) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-24 23:07:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 23:07:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 23:07:35 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 23:07:35 LOG5 finish_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-24 23:07:35 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-24 23:07:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:07:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 23:07:35 LOG5 end_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-24 23:07:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-24 23:07:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 23:07:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 23:07:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 23:07:35 LOG5 begin_task: Level: (4) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-24 23:07:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080424.a2048.0011.fits} 2008-Apr-24 23:07:35 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 23:07:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 23:07:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 23:07:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 23:07:35 LOG5 end_task: Level: (4) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-24 23:07:35 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-24 23:07:35 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-24 23:07:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 23:07:35 LOG5 begin_task: Level: (4) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-24 23:07:35 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 23:07:35 LOG5 log_alfabeam: Parameters: 12.13422222222222 7.5975555555555543 12.909903 2008.3174910322712 -21.400078 2008-Apr-24 23:07:35 LOG4 log_alfabeam: ALFABEAM 0 12.134222222222222 7.597555555555552 2008-Apr-24 23:07:35 LOG4 log_alfabeam: ALFABEAM 1 12.134007412584724 7.695024326101177 2008-Apr-24 23:07:35 LOG4 log_alfabeam: ALFABEAM 2 12.128323012673373 7.630455546892177 2008-Apr-24 23:07:35 LOG4 log_alfabeam: ALFABEAM 3 12.128555856397739 7.532650305006593 2008-Apr-24 23:07:35 LOG4 log_alfabeam: ALFABEAM 4 12.134480451642652 7.499892088263215 2008-Apr-24 23:07:35 LOG4 log_alfabeam: ALFABEAM 5 12.140122351451190 7.565251794895858 2008-Apr-24 23:07:35 LOG4 log_alfabeam: ALFABEAM 6 12.139882264192192 7.662580183839688 2008-Apr-24 23:07:35 INFO2 take_spectra: Starting WAPP scan: 811500215 2008-Apr-24 23:07:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 23:07:36 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 23:07:36 LOG5 begin_task: Level: (5) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-24 23:07:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:07:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11257.00 2008-Apr-24 23:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165097 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:07:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:07:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 23:07:42 LOG5 end_task: Level: (5) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-24 23:07:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 23:07:42 LOG5 end_task: Level: (4) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-24 23:07:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 23:07:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 23:07:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 23:07:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 23:07:42 LOG5 begin_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-24 23:07:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.512 > 1.4)! 2008-Apr-24 23:07:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.305 1.176 1.220 1.457 2008-Apr-24 23:07:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.447 1.354 1.450 1.512 2008-Apr-24 23:07:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.349 1.391 1.486 1.246 2008-Apr-24 23:07:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.510 1.483 1.326 1.317 2008-Apr-24 23:07:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 23:07:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 23:07:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 23:07:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 23:07:43 LOG5 end_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-24 23:07:43 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-24 23:07:43 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-24 23:07:43 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 23:07:43 LOG5 begin_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-24 23:07:43 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 23:07:43 LOG5 log_alfabeam: Parameters: 12.13422222222222 7.5975555555555543 12.911853 2008.3174912540878 -21.400078 2008-Apr-24 23:07:43 LOG4 log_alfabeam: ALFABEAM 0 12.134222222222222 7.597555555555554 2008-Apr-24 23:07:43 LOG4 log_alfabeam: ALFABEAM 1 12.134015357419198 7.695028275248410 2008-Apr-24 23:07:43 LOG4 log_alfabeam: ALFABEAM 2 12.128325706295241 7.630561773949337 2008-Apr-24 23:07:43 LOG4 log_alfabeam: ALFABEAM 3 12.128550557053753 7.532752724458328 2008-Apr-24 23:07:43 LOG4 log_alfabeam: ALFABEAM 4 12.134472434339626 7.499887624185059 2008-Apr-24 23:07:43 LOG4 log_alfabeam: ALFABEAM 5 12.140119702963187 7.565144702061032 2008-Apr-24 23:07:43 LOG4 log_alfabeam: ALFABEAM 6 12.139887584651150 7.662477690656165 2008-Apr-24 23:07:43 INFO2 take_spectra: Starting WAPP scan: 811500216 2008-Apr-24 23:07:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 23:07:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 23:07:43 LOG5 begin_task: Level: (5) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-24 23:07:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:07:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11264.00 2008-Apr-24 23:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165097 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:07:49 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-24 23:07:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:07:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 23:07:49 LOG5 end_task: Level: (5) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-24 23:07:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 23:07:49 LOG5 end_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-24 23:07:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 23:07:49 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-24 23:07:49 LOG5 finish_task: Level: (3) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-24 23:07:49 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-24 23:07:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:07:49 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-24 23:07:49 LOG5 end_task: Level: (3) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-24 23:07:50 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-24 23:07:50 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 47.49 and ZA = 15.55 2008-Apr-24 23:07:50 LOG3 track_source: Calling 'track_source AGESVC1A_p2_057 47.49 15.5511075602 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 23:07:50 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 23:07:50 LOG5 begin_task: Level: (3) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-24 23:07:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_057} INFO {Slewing to source 'AGESVC1A_p2_057' ...} 2008-Apr-24 23:07:50 INFO1 track_source: Starting to track AGESVC1A_p2_057 2008-Apr-24 23:07:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_057" 2008-Apr-24 23:07:50 LOG3 vw_send: To DATATAKING: set ra 47.49 2008-Apr-24 23:07:50 LOG3 vw_send: To DATATAKING: set dec 15.5511075602 2008-Apr-24 23:07:50 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 23:07:50 LOG3 vw_send: To DATATAKING: pnt tr 47.49 15.5511075602 -CF 2008-Apr-24 23:07:50 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 23:07:50 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 23:07:50 LOG5 finish_task: Level: (3) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-24 23:07:50 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 23:07:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:07:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 23:07:50 LOG5 end_task: Level: (3) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-24 23:07:50 LOG1 fixed_driftmap: Parameters: HA = +00:45:59.9 Start = 12:55:27.1 LST = 12:54:49.7 diff = 37.4 secs 2008-Apr-24 23:07:50 INFO2 fixed_driftmap: Waiting 35.4 seconds for RA 12:09:27 2008-Apr-24 23:07:50 INFO2 lstwait: Waiting for 35.3 secs from LST 12:54:50 to LST 12:55:25 ... 2008-Apr-24 23:07:50 LOG4 send_obs_status: To obs_status: <1> TASKTIME 35.271862751303424 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 23:07:50 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-24 23:07:50 LOG5 begin_task: Level: (3) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-24 23:07:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.120 2008-Apr-24 23:07:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_057" 2008-Apr-24 23:07:50 LOG4 got_cormsg: From DATATAKING: set ra 47.49 2008-Apr-24 23:07:50 LOG4 got_cormsg: From DATATAKING: set dec 15.5511075602 2008-Apr-24 23:07:50 LOG4 got_cormsg: From DATATAKING: vw% 47.49 2008-Apr-24 23:07:50 LOG4 got_cormsg: From DATATAKING: vw% 15.5511075602 2008-Apr-24 23:07:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:07:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 23:07:50 LOG4 got_cormsg: From DATATAKING: pnt tr 47.49 15.5511075602 -CF 2008-Apr-24 23:07:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 23:07:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 23:07:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:08:25 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-24 23:08:25 LOG5 end_task: Level: (3) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-24 23:08:25 LOG4 lstwait: Finished waiting, the gui caused difference: 0.72876728000110802 2008-Apr-24 23:08:25 INFO3 lstwait: Finished waiting 2008-Apr-24 23:08:25 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 23:08:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-24 23:08:25 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 23:08:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-24 23:08:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-24 23:08:25 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-24 23:08:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 23:08:25 LOG5 begin_task: Level: (3) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-24 23:08:25 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-24 23:08:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-24 23:08:25 INFO2 take_spectra: Starting WAPP scan: 811500217 2008-Apr-24 23:08:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-24 23:08:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 23:08:26 LOG5 begin_task: Level: (4) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-24 23:08:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:08:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11307.00 2008-Apr-24 23:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.165097 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.165097 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:08:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.489 > 1.4)! 2008-Apr-24 23:08:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.489 0.922 1.096 2008-Apr-24 23:08:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 0.997 1.065 1.118 2008-Apr-24 23:08:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.987 1.018 1.083 0.935 2008-Apr-24 23:08:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 1.094 0.978 0.973 2008-Apr-24 23:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.918 and 1.499 (still bad) 2008-Apr-24 23:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 1.501 (still bad) 2008-Apr-24 23:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.499 (still bad) 2008-Apr-24 23:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 1.409 (still bad) 2008-Apr-24 23:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.427 (still bad) 2008-Apr-24 23:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.415 (still bad) 2008-Apr-24 23:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.419 (still bad) 2008-Apr-24 23:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.408 (still bad) 2008-Apr-24 23:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.918 and 1.448 (still bad) 2008-Apr-24 23:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.466 (still bad) 2008-Apr-24 23:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.474 (still bad) 2008-Apr-24 23:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.477 (still bad) 2008-Apr-24 23:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.481 (still bad) 2008-Apr-24 23:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.478 (still bad) 2008-Apr-24 23:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.474 (still bad) 2008-Apr-24 23:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.469 (still bad) 2008-Apr-24 23:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.468 (still bad) 2008-Apr-24 23:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.463 (still bad) 2008-Apr-24 23:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.462 (still bad) 2008-Apr-24 23:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.462 (still bad) 2008-Apr-24 23:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.456 (still bad) 2008-Apr-24 23:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.453 (still bad) 2008-Apr-24 23:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.452 (still bad) 2008-Apr-24 23:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.447 (still bad) 2008-Apr-24 23:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.445 (still bad) 2008-Apr-24 23:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.441 (still bad) 2008-Apr-24 23:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.441 (still bad) 2008-Apr-24 23:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.436 (still bad) 2008-Apr-24 23:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.433 (still bad) 2008-Apr-24 23:09:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.431 > 1.4)! 2008-Apr-24 23:09:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.431 0.912 1.091 2008-Apr-24 23:09:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.995 1.062 1.118 2008-Apr-24 23:09:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.010 1.083 0.936 2008-Apr-24 23:09:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.083 0.968 0.960 2008-Apr-24 23:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.430 (still bad) 2008-Apr-24 23:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.427 (still bad) 2008-Apr-24 23:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.420 (still bad) 2008-Apr-24 23:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.421 (still bad) 2008-Apr-24 23:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.420 (still bad) 2008-Apr-24 23:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.413 (still bad) 2008-Apr-24 23:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.414 (still bad) 2008-Apr-24 23:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.412 (still bad) 2008-Apr-24 23:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.410 (still bad) 2008-Apr-24 23:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.408 (still bad) 2008-Apr-24 23:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.405 (still bad) 2008-Apr-24 23:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.404 (still bad) 2008-Apr-24 23:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.402 (still bad) 2008-Apr-24 23:10:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.399 2008-Apr-24 23:14:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.404 > 1.4)! 2008-Apr-24 23:14:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 1.404 0.915 1.094 2008-Apr-24 23:14:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.991 1.061 1.116 2008-Apr-24 23:14:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.013 1.085 0.935 2008-Apr-24 23:14:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.081 0.965 0.958 2008-Apr-24 23:14:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.386 2008-Apr-24 23:14:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.409 > 1.4)! 2008-Apr-24 23:14:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.409 0.914 1.093 2008-Apr-24 23:14:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.994 1.097 1.153 2008-Apr-24 23:14:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.978 1.007 1.082 0.933 2008-Apr-24 23:14:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.082 0.965 0.959 2008-Apr-24 23:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.483 (still bad) 2008-Apr-24 23:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.920 and 1.607 (still bad) 2008-Apr-24 23:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 1.620 (still bad) 2008-Apr-24 23:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 1.609 (still bad) 2008-Apr-24 23:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 1.603 (still bad) 2008-Apr-24 23:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 1.537 (still bad) 2008-Apr-24 23:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.918 and 1.508 (still bad) 2008-Apr-24 23:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 1.521 (still bad) 2008-Apr-24 23:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 1.522 (still bad) 2008-Apr-24 23:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.521 (still bad) 2008-Apr-24 23:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.515 (still bad) 2008-Apr-24 23:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.510 (still bad) 2008-Apr-24 23:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.507 (still bad) 2008-Apr-24 23:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.503 (still bad) 2008-Apr-24 23:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.501 (still bad) 2008-Apr-24 23:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.497 (still bad) 2008-Apr-24 23:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.492 (still bad) 2008-Apr-24 23:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.490 (still bad) 2008-Apr-24 23:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.485 (still bad) 2008-Apr-24 23:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.483 (still bad) 2008-Apr-24 23:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.479 (still bad) 2008-Apr-24 23:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.475 (still bad) 2008-Apr-24 23:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.473 (still bad) 2008-Apr-24 23:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.470 (still bad) 2008-Apr-24 23:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.465 (still bad) 2008-Apr-24 23:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.464 (still bad) 2008-Apr-24 23:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.461 (still bad) 2008-Apr-24 23:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.456 (still bad) 2008-Apr-24 23:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.456 (still bad) 2008-Apr-24 23:15:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.451 > 1.4)! 2008-Apr-24 23:15:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 1.451 0.915 1.091 2008-Apr-24 23:15:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.991 1.064 1.117 2008-Apr-24 23:15:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.010 1.085 0.936 2008-Apr-24 23:15:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.082 0.967 0.960 2008-Apr-24 23:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.448 (still bad) 2008-Apr-24 23:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.449 (still bad) 2008-Apr-24 23:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.445 (still bad) 2008-Apr-24 23:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.446 (still bad) 2008-Apr-24 23:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.443 (still bad) 2008-Apr-24 23:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.440 (still bad) 2008-Apr-24 23:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.436 (still bad) 2008-Apr-24 23:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.437 (still bad) 2008-Apr-24 23:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.434 (still bad) 2008-Apr-24 23:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.432 (still bad) 2008-Apr-24 23:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.434 (still bad) 2008-Apr-24 23:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.427 (still bad) 2008-Apr-24 23:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.429 (still bad) 2008-Apr-24 23:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.425 (still bad) 2008-Apr-24 23:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.424 (still bad) 2008-Apr-24 23:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.421 (still bad) 2008-Apr-24 23:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.420 (still bad) 2008-Apr-24 23:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.418 (still bad) 2008-Apr-24 23:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.417 (still bad) 2008-Apr-24 23:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.418 (still bad) 2008-Apr-24 23:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.416 (still bad) 2008-Apr-24 23:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.414 (still bad) 2008-Apr-24 23:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.411 (still bad) 2008-Apr-24 23:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.409 (still bad) 2008-Apr-24 23:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.410 (still bad) 2008-Apr-24 23:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.407 (still bad) 2008-Apr-24 23:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.408 (still bad) 2008-Apr-24 23:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.406 (still bad) 2008-Apr-24 23:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.405 (still bad) 2008-Apr-24 23:17:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.402 > 1.4)! 2008-Apr-24 23:17:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 1.402 0.912 1.086 2008-Apr-24 23:17:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 0.991 1.068 1.121 2008-Apr-24 23:17:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.007 1.082 0.936 2008-Apr-24 23:17:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 1.081 0.967 0.959 2008-Apr-24 23:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.404 (still bad) 2008-Apr-24 23:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.401 (still bad) 2008-Apr-24 23:17:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.398 2008-Apr-24 23:26:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.788 < 0.8)! 2008-Apr-24 23:26:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 0.788 0.918 1.091 2008-Apr-24 23:26:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.996 1.072 1.124 2008-Apr-24 23:26:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 1.016 1.089 0.942 2008-Apr-24 23:26:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 1.087 0.975 0.966 2008-Apr-24 23:26:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.842 and 1.124 2008-Apr-24 23:27:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.726 < 0.8)! 2008-Apr-24 23:27:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 0.726 0.927 1.096 2008-Apr-24 23:27:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.997 1.082 1.137 2008-Apr-24 23:27:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.991 1.019 1.088 0.940 2008-Apr-24 23:27:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.085 0.972 0.964 2008-Apr-24 23:27:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.812 and 1.135 2008-Apr-24 23:27:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.509 > 1.4)! 2008-Apr-24 23:27:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.509 0.923 1.103 2008-Apr-24 23:27:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 0.996 1.080 1.135 2008-Apr-24 23:27:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 1.016 1.090 0.939 2008-Apr-24 23:27:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 1.087 0.972 0.967 2008-Apr-24 23:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.921 and 1.519 (still bad) 2008-Apr-24 23:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.919 and 1.514 (still bad) 2008-Apr-24 23:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.918 and 1.504 (still bad) 2008-Apr-24 23:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.918 and 1.495 (still bad) 2008-Apr-24 23:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.919 and 1.485 (still bad) 2008-Apr-24 23:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.918 and 1.474 (still bad) 2008-Apr-24 23:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.918 and 1.462 (still bad) 2008-Apr-24 23:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.918 and 1.457 (still bad) 2008-Apr-24 23:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 1.449 (still bad) 2008-Apr-24 23:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 1.444 (still bad) 2008-Apr-24 23:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.440 (still bad) 2008-Apr-24 23:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 1.431 (still bad) 2008-Apr-24 23:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.427 (still bad) 2008-Apr-24 23:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.422 (still bad) 2008-Apr-24 23:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.415 (still bad) 2008-Apr-24 23:28:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:28:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 23:28:27 LOG5 end_task: Level: (4) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-24 23:28:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 23:28:27 LOG5 end_task: Level: (3) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-24 23:28:27 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-24 23:28:27 LOG5 finish_task: Level: (2) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-24 23:28:27 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-24 23:28:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 23:28:27 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-24 23:28:27 LOG5 end_task: Level: (2) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-24 23:28:27 COMMAND run_command_line: EXECUTING command 51: 'FIXEDDRIFT az=48.01 alfaangle=-21.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_059 ra=122900.00 dec=73300.00' 2008-Apr-24 23:28:27 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-24 23:28:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 23:28:28 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 48.01 -21.8 hcorcal 5 tracking no first 1 AGESVC1B_p1_059 122900.00 73300.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 23:28:28 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-24 23:28:28 LOG5 begin_task: Level: (2) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-24 23:28:28 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p2_057' 2008-Apr-24 23:28:28 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-24 23:28:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p1_059} 2008-Apr-24 23:28:28 INFO3 fixed_driftmap: Sending telescope to Az = 48.01 and ZA = 15.76 2008-Apr-24 23:28:28 LOG3 track_source: Calling 'track_source AGESVC1B_p1_059 48.01 15.7627778893 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 23:28:28 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 23:28:28 LOG5 begin_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-24 23:28:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_059} INFO {Slewing to source 'AGESVC1B_p1_059' ...} 2008-Apr-24 23:28:28 INFO1 track_source: Starting to track AGESVC1B_p1_059 2008-Apr-24 23:28:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_059" 2008-Apr-24 23:28:28 LOG3 vw_send: To DATATAKING: set ra 48.01 2008-Apr-24 23:28:28 LOG3 vw_send: To DATATAKING: set dec 15.7627778893 2008-Apr-24 23:28:28 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 23:28:28 LOG3 vw_send: To DATATAKING: pnt tr 48.01 15.7627778893 -CF 2008-Apr-24 23:28:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 23:28:28 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 23:28:28 LOG5 finish_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-24 23:28:28 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 23:28:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:28:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 23:28:28 LOG5 end_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-24 23:28:28 START begin_task: Starting task 'rotate ALFA to -21.8 degrees' 2008-Apr-24 23:28:28 LOG5 begin_task: Level: (3) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-24 23:28:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -21.8 degrees ...} 2008-Apr-24 23:28:28 INFO2 rotate_alfa: ALFA commanded to -21.8 degrees 2008-Apr-24 23:28:28 LOG3 sock_errsend: To ALFAMOTOR: POSITION -21.8 REPLY 2008-Apr-24 23:28:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 23:28:28 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 23:28:28 LOG5 begin_task: Level: (4) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-24 23:28:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_059" 2008-Apr-24 23:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.415 (still bad) 2008-Apr-24 23:28:28 LOG4 got_cormsg: From DATATAKING: set ra 48.01 2008-Apr-24 23:28:28 LOG4 got_cormsg: From DATATAKING: set dec 15.7627778893 2008-Apr-24 23:28:28 LOG4 got_cormsg: From DATATAKING: vw% 48.01 2008-Apr-24 23:28:28 LOG4 got_cormsg: From DATATAKING: vw% 15.7627778893 2008-Apr-24 23:28:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:28:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 23:28:28 LOG4 got_cormsg: From DATATAKING: pnt tr 48.01 15.7627778893 -CF 2008-Apr-24 23:28:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 23:28:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 23:28:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:28:30 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 23:28:30 INFO3 alfa_motor: ALFA rotator in-position -21.80 degrees 2008-Apr-24 23:28:30 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 23:28:30 LOG5 end_task: Level: (4) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-24 23:28:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 23:28:30 STOP finish_task: Finishing task 'rotate ALFA to -21.8 degrees' 2008-Apr-24 23:28:30 LOG5 finish_task: Level: (3) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-24 23:28:30 INFO2 finish_task: DONE finished configuration: rotating ALFA to -21.8 degrees 2008-Apr-24 23:28:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:28:30 STOP end_task: Finishing task 'rotate ALFA to -21.8 degrees' with status 'OK' 2008-Apr-24 23:28:30 LOG5 end_task: Level: (3) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-24 23:28:30 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 23:28:30 LOG5 begin_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-24 23:28:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 23:28:30 LOG3 waittrk: Start waittrk 5 2008-Apr-24 23:28:30 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 23:28:30 LOG5 begin_task: Level: (4) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-24 23:28:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 23:28:35 LOG5 end_task: Level: (4) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-24 23:28:35 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 23:28:35 LOG5 begin_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-24 23:28:44 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 23:28:44 LOG5 end_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-24 23:28:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 23:28:44 INFO2 waittrk: Now tracking AGESVC1B_p1_059 2008-Apr-24 23:28:44 LOG4 waittrk: Current telescope position: Az = 407.78 ZA = 15.75 2008-Apr-24 23:28:44 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 23:28:44 LOG5 finish_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-24 23:28:44 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 23:28:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:28:44 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 23:28:44 LOG5 end_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-24 23:28:44 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 23:28:44 LOG5 begin_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-24 23:28:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 23:28:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 23:28:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:28:44 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 23:28:44 LOG5 begin_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-24 23:28:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 23:28:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:28:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:28:45 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 23:28:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 23:28:45 LOG5 end_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-24 23:28:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 23:28:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 23:28:45 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 23:28:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 23:28:45 LOG5 begin_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-24 23:28:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:28:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 23:28:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 23:28:45 LOG5 end_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-24 23:28:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 23:28:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 23:28:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 23:28:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 23:28:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 23:28:45 LOG5 begin_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-24 23:28:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 23:28:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 23:28:45 LOG5 end_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-24 23:28:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 23:28:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 23:28:45 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 23:28:45 LOG5 finish_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-24 23:28:45 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 23:28:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:28:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 23:28:45 LOG5 end_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-24 23:28:45 LOG5 dopset_later: Calling 'dopset_later 38.039744435861387' 2008-Apr-24 23:28:45 INFO3 dopset_later: Setting Doppler correction for 23:29:23 (38 seconds from now) 2008-Apr-24 23:28:46 LOG5 antvel: Calling 'antvel 48.010000 15.762778 F 38.039744435861387' 2008-Apr-24 23:28:46 LOG2 antvel: Parameters to Doppler: Heliocentric 98963 2008 115 0.0 2008-Apr-24 23:28:46 INFO5 antvel: Computed antenna velocity: +14.95017 km/s 2008-Apr-24 23:28:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=14.9501683206 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-24 23:28:46 INFO4 dopset_gen: New sky frequencies: 1381.174552 1381.174552 1381.174552 1381.174552 1381.174552 1381.174552 1381.174552 1381.174552 1381.174552 2008-Apr-24 23:28:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.174552 sky0=1381.174552 sky1=1381.174552 sky2=1381.174552 sky3=1381.174552 sky4=1381.174552 sky5=1381.174552 sky6=1381.174552 sky7=1381.174552 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:28:46 LOG2 dopset_gen: Result from 'sky2syn': 1631.174552 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:28:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631174552.0} 2008-Apr-24 23:28:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:28:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-24 23:28:46 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-24 23:28:46 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:26.6 Dec = +07:32:50.4 2008-Apr-24 23:28:46 LOG3 track_source: Calling 'track_source AGESVC1B_p1_059 122826.6 073250.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 23:28:46 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 23:28:46 LOG5 begin_task: Level: (3) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-24 23:28:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_059} INFO {Slewing to source 'AGESVC1B_p1_059' ...} 2008-Apr-24 23:28:46 INFO1 track_source: Starting to track AGESVC1B_p1_059 2008-Apr-24 23:28:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_059" 2008-Apr-24 23:28:46 LOG3 vw_send: To DATATAKING: set ra 122826.6 2008-Apr-24 23:28:46 LOG3 vw_send: To DATATAKING: set dec 073250.4 2008-Apr-24 23:28:46 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 23:28:46 LOG3 vw_send: To DATATAKING: pnt tr 122826.6 073250.4 -CJ 2008-Apr-24 23:28:46 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 23:28:46 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 23:28:46 LOG5 finish_task: Level: (3) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-24 23:28:46 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 23:28:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:28:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 23:28:46 LOG5 end_task: Level: (3) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-24 23:28:46 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 23:28:46 LOG5 begin_task: Level: (3) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-24 23:28:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 23:28:46 LOG3 waittrk: Start waittrk 5 2008-Apr-24 23:28:46 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 23:28:46 LOG5 begin_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631174552.0} 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_059" 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: set ra 122826.6 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: set dec 073250.4 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: vw% 122826.6 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: vw% 073250.4 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: pnt tr 122826.6 073250.4 -CJ 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 23:28:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:28:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 23:28:51 LOG5 end_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-24 23:28:51 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 23:28:51 LOG5 begin_task: Level: (4) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-24 23:28:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 23:28:53 LOG5 end_task: Level: (4) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-24 23:28:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 23:28:53 INFO2 waittrk: Now tracking AGESVC1B_p1_059 2008-Apr-24 23:28:53 LOG4 waittrk: Current telescope position: Az = 407.82 ZA = 15.76 2008-Apr-24 23:28:53 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 23:28:53 LOG5 finish_task: Level: (3) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-24 23:28:53 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 23:28:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:28:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 23:28:53 LOG5 end_task: Level: (3) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-24 23:28:53 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 23:28:53 LOG5 begin_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-24 23:28:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 23:28:53 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 23:28:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 23:28:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 23:28:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:28:53 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 23:28:53 LOG5 begin_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-24 23:28:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 23:28:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:28:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:28:53 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 23:28:53 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 23:28:53 LOG5 end_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-24 23:28:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 23:28:53 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 23:28:53 LOG5 begin_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-24 23:28:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 23:28:54 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 23:28:54 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 23:28:54 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 23:28:54 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 23:28:54 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 23:28:54 LOG5 begin_task: Level: (5) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-24 23:28:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 23:28:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:28:54 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-24 23:28:54 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-24 23:28:54 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 4 dB 2008-Apr-24 23:28:54 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-24 23:28:54 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 23:28:54 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 23:28:54 LOG5 end_task: Level: (5) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-24 23:28:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.969 1.091 ALFA beam 1: 0.917 1.095 2008-Apr-24 23:28:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.088 1.006 ALFA beam 3: 1.089 0.877 2008-Apr-24 23:28:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.997 1.027 ALFA beam 5: 1.088 0.940 2008-Apr-24 23:28:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.110 1.090 ALFA beam 7: 0.972 0.967 2008-Apr-24 23:28:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 23:28:54 LOG5 finish_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-24 23:28:54 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 23:28:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:28:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 23:28:54 LOG5 end_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-24 23:28:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 23:28:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 23:28:54 LOG5 finish_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-24 23:28:54 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 23:28:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:28:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 23:28:54 LOG5 end_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-24 23:28:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:28:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:28:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:28:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:28:54 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-24 23:28:54 START begin_task: Starting task 'WAPP calibration' 2008-Apr-24 23:28:54 LOG5 begin_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-24 23:28:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-24 23:28:54 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-24 23:28:55 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 23:28:55 LOG5 begin_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-24 23:28:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 23:28:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 23:28:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:28:55 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 23:28:55 LOG5 begin_task: Level: (5) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-24 23:28:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 23:28:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 23:28:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:28:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:28:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 23:28:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 23:28:55 LOG5 end_task: Level: (5) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-24 23:28:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 23:28:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 23:28:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 23:28:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 23:28:55 LOG5 begin_task: Level: (5) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-24 23:28:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:28:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 23:28:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 23:28:55 LOG5 end_task: Level: (5) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-24 23:28:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 23:28:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 23:28:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 23:28:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 23:28:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 23:28:55 LOG5 begin_task: Level: (5) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-24 23:28:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0012.fits 2008-Apr-24 23:28:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 23:28:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 23:28:55 LOG5 end_task: Level: (5) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-24 23:28:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 23:28:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 23:28:55 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 23:28:55 LOG5 finish_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-24 23:28:55 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-24 23:28:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:28:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 23:28:55 LOG5 end_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-24 23:28:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-24 23:28:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 23:28:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 23:28:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 23:28:55 LOG5 begin_task: Level: (4) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-24 23:28:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080424.a2048.0012.fits} 2008-Apr-24 23:28:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 23:28:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 23:28:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 23:28:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 23:28:55 LOG5 end_task: Level: (4) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-24 23:28:55 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-24 23:28:55 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-24 23:28:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 23:28:55 LOG5 begin_task: Level: (4) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-24 23:28:55 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 23:28:55 LOG5 log_alfabeam: Parameters: 12.474055555555557 7.5473333333333317 13.266432 2008.3175315930237 -21.800030 2008-Apr-24 23:28:55 LOG4 log_alfabeam: ALFABEAM 0 12.474055555555557 7.547333333333330 2008-Apr-24 23:28:55 LOG4 log_alfabeam: ALFABEAM 1 12.473847604907363 7.644701231078532 2008-Apr-24 23:28:55 LOG4 log_alfabeam: ALFABEAM 2 12.468153077294669 7.580295335851812 2008-Apr-24 23:28:55 LOG4 log_alfabeam: ALFABEAM 3 12.468379041216387 7.482591055864412 2008-Apr-24 23:28:55 LOG4 log_alfabeam: ALFABEAM 4 12.474306281383061 7.449772087550008 2008-Apr-24 23:28:55 LOG4 log_alfabeam: ALFABEAM 5 12.479958858025812 7.514961394154465 2008-Apr-24 23:28:55 LOG4 log_alfabeam: ALFABEAM 6 12.479726251574846 7.612187617361821 2008-Apr-24 23:28:55 INFO2 take_spectra: Starting WAPP scan: 811500218 2008-Apr-24 23:28:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 23:28:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 23:28:56 LOG5 begin_task: Level: (5) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-24 23:28:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:28:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12537.00 2008-Apr-24 23:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.174552 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:29:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:29:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:29:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.519 > 1.4)! 2008-Apr-24 23:29:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.969 1.091 0.917 1.095 2008-Apr-24 23:29:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.464 1.371 1.470 1.214 2008-Apr-24 23:29:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.365 1.409 1.495 1.249 2008-Apr-24 23:29:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.519 1.493 1.333 1.325 2008-Apr-24 23:29:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 23:29:02 LOG5 end_task: Level: (5) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-24 23:29:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 23:29:02 LOG5 end_task: Level: (4) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-24 23:29:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 23:29:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 23:29:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 23:29:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 23:29:02 LOG5 begin_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-24 23:29:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 23:29:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 23:29:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 23:29:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 23:29:03 LOG5 end_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-24 23:29:03 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-24 23:29:03 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-24 23:29:03 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 23:29:03 LOG5 begin_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-24 23:29:03 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-24 23:29:03 LOG5 log_alfabeam: Parameters: 12.474055555555557 7.5473333333333317 13.268382 2008.3175318148401 -21.800030 2008-Apr-24 23:29:03 LOG4 log_alfabeam: ALFABEAM 0 12.474055555555557 7.547333333333332 2008-Apr-24 23:29:03 LOG4 log_alfabeam: ALFABEAM 1 12.473855358926260 7.644704972420409 2008-Apr-24 23:29:03 LOG4 log_alfabeam: ALFABEAM 2 12.468155713916168 7.580399200169722 2008-Apr-24 23:29:03 LOG4 log_alfabeam: ALFABEAM 3 12.468373876353935 7.482691326131218 2008-Apr-24 23:29:03 LOG4 log_alfabeam: ALFABEAM 4 12.474298456386851 7.449767857569428 2008-Apr-24 23:29:03 LOG4 log_alfabeam: ALFABEAM 5 12.479956265104313 7.514856678117193 2008-Apr-24 23:29:03 LOG4 log_alfabeam: ALFABEAM 6 12.479731435961639 7.612087272806731 2008-Apr-24 23:29:03 INFO2 take_spectra: Starting WAPP scan: 811500219 2008-Apr-24 23:29:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-24 23:29:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 23:29:03 LOG5 begin_task: Level: (5) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-24 23:29:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:29:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12544.00 2008-Apr-24 23:29:08 INFO5 check_wapp_levels: WAPP power levels are between 1.214 and 1.519 (still bad) 2008-Apr-24 23:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.174552 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:29:09 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-24 23:29:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:29:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 23:29:09 LOG5 end_task: Level: (5) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-24 23:29:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 23:29:09 LOG5 end_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-24 23:29:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 23:29:09 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-24 23:29:09 LOG5 finish_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-24 23:29:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-24 23:29:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:29:10 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-24 23:29:10 LOG5 end_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-24 23:29:10 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-24 23:29:10 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 48.01 and ZA = 15.76 2008-Apr-24 23:29:10 LOG3 track_source: Calling 'track_source AGESVC1B_p1_059 48.01 15.7627778893 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-24 23:29:10 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 23:29:10 LOG5 begin_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-24 23:29:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p1_059} INFO {Slewing to source 'AGESVC1B_p1_059' ...} 2008-Apr-24 23:29:10 INFO1 track_source: Starting to track AGESVC1B_p1_059 2008-Apr-24 23:29:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p1_059" 2008-Apr-24 23:29:10 LOG3 vw_send: To DATATAKING: set ra 48.01 2008-Apr-24 23:29:10 LOG3 vw_send: To DATATAKING: set dec 15.7627778893 2008-Apr-24 23:29:10 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 23:29:10 LOG3 vw_send: To DATATAKING: pnt tr 48.01 15.7627778893 -CF 2008-Apr-24 23:29:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 23:29:10 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 23:29:10 LOG5 finish_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-24 23:29:10 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 23:29:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:29:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 23:29:10 LOG5 end_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-24 23:29:10 LOG1 fixed_driftmap: Parameters: HA = +00:47:00.2 Start = 13:16:27.3 LST = 13:16:13.2 diff = 14.1 secs 2008-Apr-24 23:29:10 INFO2 fixed_driftmap: Waiting 12.1 seconds for RA 12:29:27 2008-Apr-24 23:29:10 INFO2 lstwait: Waiting for 12 secs from LST 13:16:13 to LST 13:16:25 ... 2008-Apr-24 23:29:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 12.044915042264078 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-24 23:29:10 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-24 23:29:10 LOG5 begin_task: Level: (3) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-24 23:29:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p1_059" 2008-Apr-24 23:29:10 LOG4 got_cormsg: From DATATAKING: set ra 48.01 2008-Apr-24 23:29:10 LOG4 got_cormsg: From DATATAKING: set dec 15.7627778893 2008-Apr-24 23:29:10 LOG4 got_cormsg: From DATATAKING: vw% 48.01 2008-Apr-24 23:29:10 LOG4 got_cormsg: From DATATAKING: vw% 15.7627778893 2008-Apr-24 23:29:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:29:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 23:29:10 LOG4 got_cormsg: From DATATAKING: pnt tr 48.01 15.7627778893 -CF 2008-Apr-24 23:29:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-24 23:29:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 23:29:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:29:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.903 and 1.110 2008-Apr-24 23:29:22 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-24 23:29:22 LOG5 end_task: Level: (3) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-24 23:29:22 LOG4 lstwait: Finished waiting, the gui caused difference: 0.95770748000205685 2008-Apr-24 23:29:22 INFO3 lstwait: Finished waiting 2008-Apr-24 23:29:22 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 23:29:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-24 23:29:22 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 23:29:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-24 23:29:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-24 23:29:22 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-24 23:29:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-24 23:29:22 LOG5 begin_task: Level: (3) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-24 23:29:22 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-24 23:29:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-24 23:29:22 INFO2 take_spectra: Starting WAPP scan: 811500220 2008-Apr-24 23:29:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-24 23:29:23 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-24 23:29:23 LOG5 begin_task: Level: (4) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-24 23:29:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:29:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12564.00 2008-Apr-24 23:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.174552 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.174552 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:30:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.543 < 0.8)! 2008-Apr-24 23:30:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.969 0.543 0.921 1.103 2008-Apr-24 23:30:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.000 1.077 0.895 2008-Apr-24 23:30:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 1.019 1.093 0.942 2008-Apr-24 23:30:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 1.091 0.973 0.967 2008-Apr-24 23:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.111 (still bad) 2008-Apr-24 23:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.111 (still bad) 2008-Apr-24 23:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.111 (still bad) 2008-Apr-24 23:30:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.820 and 1.112 2008-Apr-24 23:30:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.795 < 0.8)! 2008-Apr-24 23:30:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 0.795 0.921 1.102 2008-Apr-24 23:30:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.001 1.078 0.895 2008-Apr-24 23:30:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.989 1.022 1.093 0.941 2008-Apr-24 23:30:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 1.090 0.973 0.967 2008-Apr-24 23:30:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.808 and 1.110 2008-Apr-24 23:31:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.796 < 0.8)! 2008-Apr-24 23:31:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 0.796 0.923 1.105 2008-Apr-24 23:31:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.005 1.081 0.897 2008-Apr-24 23:31:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.998 1.028 1.096 0.950 2008-Apr-24 23:31:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.116 1.097 0.978 0.973 2008-Apr-24 23:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.115 (still bad) 2008-Apr-24 23:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.114 (still bad) 2008-Apr-24 23:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.114 (still bad) 2008-Apr-24 23:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.113 (still bad) 2008-Apr-24 23:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.114 (still bad) 2008-Apr-24 23:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.795 and 1.114 (still bad) 2008-Apr-24 23:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.797 and 1.115 (still bad) 2008-Apr-24 23:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.788 and 1.116 (still bad) 2008-Apr-24 23:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.791 and 1.116 (still bad) 2008-Apr-24 23:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.115 (still bad) 2008-Apr-24 23:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.115 (still bad) 2008-Apr-24 23:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.115 (still bad) 2008-Apr-24 23:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.115 (still bad) 2008-Apr-24 23:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.792 and 1.119 (still bad) 2008-Apr-24 23:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.793 and 1.125 (still bad) 2008-Apr-24 23:32:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.810 and 1.116 2008-Apr-24 23:33:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.539 < 0.8)! 2008-Apr-24 23:33:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 0.539 0.921 1.100 2008-Apr-24 23:33:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.101 1.017 1.080 0.896 2008-Apr-24 23:33:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.992 1.023 1.092 0.943 2008-Apr-24 23:33:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 1.091 0.977 0.967 2008-Apr-24 23:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.112 (still bad) 2008-Apr-24 23:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.111 (still bad) 2008-Apr-24 23:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.111 (still bad) 2008-Apr-24 23:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.112 (still bad) 2008-Apr-24 23:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.124 (still bad) 2008-Apr-24 23:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.120 (still bad) 2008-Apr-24 23:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.119 (still bad) 2008-Apr-24 23:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.117 (still bad) 2008-Apr-24 23:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.117 (still bad) 2008-Apr-24 23:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.116 (still bad) 2008-Apr-24 23:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.117 (still bad) 2008-Apr-24 23:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.119 (still bad) 2008-Apr-24 23:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.121 (still bad) 2008-Apr-24 23:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.122 (still bad) 2008-Apr-24 23:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.121 (still bad) 2008-Apr-24 23:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.120 (still bad) 2008-Apr-24 23:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.119 (still bad) 2008-Apr-24 23:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.118 (still bad) 2008-Apr-24 23:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.116 (still bad) 2008-Apr-24 23:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.116 (still bad) 2008-Apr-24 23:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.115 (still bad) 2008-Apr-24 23:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.117 (still bad) 2008-Apr-24 23:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.115 (still bad) 2008-Apr-24 23:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.113 (still bad) 2008-Apr-24 23:34:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.859 and 1.113 2008-Apr-24 23:38:18 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 23:38:18.297 (seconds: 85098.297)!} 2008-Apr-24 23:38:18 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 23:38:18.297 (seconds: 85098.297)! 2008-Apr-24 23:38:19 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 85097.0 to 85098.0! 2008-Apr-24 23:38:20 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (85097.0 - 85099.0)! 2008-Apr-24 23:49:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:49:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-24 23:49:24 LOG5 end_task: Level: (4) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-24 23:49:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-24 23:49:24 LOG5 end_task: Level: (3) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-24 23:49:24 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-24 23:49:24 LOG5 finish_task: Level: (2) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-24 23:49:24 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2008-Apr-24 23:49:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 23:49:24 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2008-Apr-24 23:49:24 LOG5 end_task: Level: (2) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-24 23:49:24 NOTE run_command_file: DONE with command file processing 2008-Apr-24 23:49:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-24 23:49:24 STOP finish_task: Finishing task 'running command file '080424_obs.cmd'' 2008-Apr-24 23:49:24 LOG5 finish_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-24 23:49:24 DONE finish_task: DONE finished running: command file '080424_obs.cmd' 2008-Apr-24 23:49:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 23:49:24 END end_task: Finishing task 'running command file '080424_obs.cmd'' with status 'OK' 2008-Apr-24 23:49:24 LOG5 end_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-24 23:49:40 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos.cmd ' to executive ... 2008-Apr-24 23:49:40 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_ages.conf} 2008-Apr-24 23:49:40 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {TRACKCURPOS} 2008-Apr-24 23:49:40 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {ALFAANGLE 19} 2008-Apr-24 23:49:40 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2008-Apr-24 23:49:40 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-24 23:49:40 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos.cmd 1 1 4 2008-Apr-24 23:49:40 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos.cmd 1 1 4' 2008-Apr-24 23:49:40 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos.cmd'' 2008-Apr-24 23:49:40 LOG5 begin_task: Level: (1) ID = <10512> Status = 0 0 0 0 ok 2008-Apr-24 23:49:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos.cmd' ...} 2008-Apr-24 23:49:40 NOTE run_command_file: Starting execution of command file 'command_galfacurpos.cmd' from line 1 2008-Apr-24 23:49:40 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_ages.conf' 2008-Apr-24 23:49:40 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-24 23:49:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 23:49:40 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-24 23:49:41 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-24 23:49:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-24 23:49:42 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 23:49:42 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-24 23:49:43 LOG5 begin_task: Level: (2) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-24 23:49:43 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-24 23:49:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-24 23:49:43 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-24 23:49:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 23:49:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 23:49:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 23:49:43 LOG5 begin_task: Level: (3) ID = <10514> Status = 0 0 0 0 ok 2008-Apr-24 23:49:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 23:49:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 23:49:44 LOG5 end_task: Level: (3) ID = <10514> Status = 0 0 0 0 ok 2008-Apr-24 23:49:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 23:49:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 23:49:44 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-24 23:49:44 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-24 23:49:44 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-24 23:49:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-24 23:49:44 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-24 23:49:44 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-24 23:49:44 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-24 23:49:44 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-24 23:49:44 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-24 23:49:44 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-24 23:49:44 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-24 23:49:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-24 23:49:44 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-24 23:49:44 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-24 23:49:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-24 23:49:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:49:44 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-24 23:49:44 LOG5 begin_task: Level: (3) ID = <10515> Status = 0 0 0 0 ok 2008-Apr-24 23:49:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2008-Apr-24 23:49:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-24 23:49:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:49:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:49:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:49:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:49:45 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-24 23:49:45 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-24 23:49:45 LOG5 end_task: Level: (3) ID = <10515> Status = 0 0 0 0 ok 2008-Apr-24 23:49:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-24 23:49:45 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-24 23:49:45 LOG5 finish_task: Level: (2) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-24 23:49:45 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-24 23:49:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 23:49:45 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-24 23:49:45 LOG5 end_task: Level: (2) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-24 23:49:45 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-24 23:49:45 LOG5 begin_task: Level: (2) ID = <10516> Status = 0 0 0 0 ok 2008-Apr-24 23:49:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-24 23:49:45 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-24 23:49:45 START begin_task: Starting task 'selecting calibration port' 2008-Apr-24 23:49:45 LOG5 begin_task: Level: (3) ID = <10517> Status = 0 0 0 0 ok 2008-Apr-24 23:49:45 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-24 23:49:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-24 23:49:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:49:45 START begin_task: Starting task 'waiting on calport' 2008-Apr-24 23:49:45 LOG5 begin_task: Level: (4) ID = <10518> Status = 0 0 0 0 ok 2008-Apr-24 23:49:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:49:45 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-24 23:49:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:49:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:49:45 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 23:49:45 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-24 23:49:45 LOG5 end_task: Level: (4) ID = <10518> Status = 0 0 0 0 ok 2008-Apr-24 23:49:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-24 23:49:45 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-24 23:49:45 LOG5 finish_task: Level: (3) ID = <10517> Status = 0 0 0 0 ok 2008-Apr-24 23:49:45 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-24 23:49:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:49:45 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-24 23:49:45 LOG5 end_task: Level: (3) ID = <10517> Status = 0 0 0 0 ok 2008-Apr-24 23:49:45 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-24 23:49:45 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-24 23:49:46 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-24 23:49:46 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-24 23:49:46 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-24 23:49:46 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-24 23:49:46 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-24 23:49:46 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-24 23:49:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:49:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:49:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:49:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:49:46 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-24 23:49:46 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-24 23:49:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 23:49:46 LOG5 begin_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2008-Apr-24 23:49:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-24 23:49:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:49:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 23:49:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-24 23:49:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 23:49:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 23:49:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 23:49:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 23:49:46 LOG5 end_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2008-Apr-24 23:49:46 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-24 23:49:46 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-24 23:49:46 LOG5 finish_task: Level: (2) ID = <10516> Status = 0 0 0 0 ok 2008-Apr-24 23:49:46 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-24 23:49:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 23:49:46 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-24 23:49:46 LOG5 end_task: Level: (2) ID = <10516> Status = 0 0 0 0 ok 2008-Apr-24 23:49:46 COMMAND run_command_line: EXECUTING command 8: 'TRACKCURPOS' 2008-Apr-24 23:49:46 BEGIN begin_task: Starting task 'tracking current position' 2008-Apr-24 23:49:46 LOG5 begin_task: Level: (2) ID = <10520> Status = 0 0 0 0 ok 2008-Apr-24 23:49:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2008-Apr-24 23:49:46 INFO1 execute_trackcurpos: Starting to track the current commanded position RA = 12:49:25.9 and Dec = +07:32:58.7 2008-Apr-24 23:49:46 LOG3 track_source: Calling 'track_source Cur-pos 124925.9 073258.7 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Apr-24 23:49:46 START begin_task: Starting task 'sending tracking commands' 2008-Apr-24 23:49:46 LOG5 begin_task: Level: (3) ID = <10521> Status = 0 0 0 0 ok 2008-Apr-24 23:49:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2008-Apr-24 23:49:46 INFO1 track_source: Starting to track Cur-pos 2008-Apr-24 23:49:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2008-Apr-24 23:49:46 LOG3 vw_send: To DATATAKING: set ra 124925.9 2008-Apr-24 23:49:46 LOG3 vw_send: To DATATAKING: set dec 073258.7 2008-Apr-24 23:49:46 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-24 23:49:46 LOG3 vw_send: To DATATAKING: pnt tr 124925.9 073258.7 -CJ 2008-Apr-24 23:49:46 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-24 23:49:46 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-24 23:49:46 LOG5 finish_task: Level: (3) ID = <10521> Status = 0 0 0 0 ok 2008-Apr-24 23:49:46 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-24 23:49:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:49:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-24 23:49:46 LOG5 end_task: Level: (3) ID = <10521> Status = 0 0 0 0 ok 2008-Apr-24 23:49:46 START begin_task: Starting task 'waiting on telescope' 2008-Apr-24 23:49:46 LOG5 begin_task: Level: (3) ID = <10522> Status = 0 0 0 0 ok 2008-Apr-24 23:49:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-24 23:49:46 LOG3 waittrk: Start waittrk 5 2008-Apr-24 23:49:46 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-24 23:49:46 LOG5 begin_task: Level: (4) ID = <10523> Status = 0 0 0 0 ok 2008-Apr-24 23:49:46 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-24 23:49:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2008-Apr-24 23:49:46 LOG4 got_cormsg: From DATATAKING: set ra 124925.9 2008-Apr-24 23:49:46 LOG4 got_cormsg: From DATATAKING: set dec 073258.7 2008-Apr-24 23:49:46 LOG4 got_cormsg: From DATATAKING: vw% 124925.9 2008-Apr-24 23:49:46 LOG4 got_cormsg: From DATATAKING: vw% 073258.7 2008-Apr-24 23:49:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:49:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-24 23:49:46 LOG4 got_cormsg: From DATATAKING: pnt tr 124925.9 073258.7 -CJ 2008-Apr-24 23:49:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-24 23:49:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 23:49:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:49:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-24 23:49:51 LOG5 end_task: Level: (4) ID = <10523> Status = 0 0 0 0 ok 2008-Apr-24 23:49:51 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-24 23:49:51 LOG5 begin_task: Level: (4) ID = <10524> Status = 0 0 0 0 ok 2008-Apr-24 23:49:56 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-24 23:49:56 LOG5 end_task: Level: (4) ID = <10524> Status = 0 0 0 0 ok 2008-Apr-24 23:49:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-24 23:49:56 INFO2 waittrk: Now tracking Cur-pos 2008-Apr-24 23:49:56 LOG4 waittrk: Current telescope position: Az = 407.89 ZA = 15.78 2008-Apr-24 23:49:56 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-24 23:49:56 LOG5 finish_task: Level: (3) ID = <10522> Status = 0 0 0 0 ok 2008-Apr-24 23:49:56 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-24 23:49:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:49:56 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-24 23:49:56 LOG5 end_task: Level: (3) ID = <10522> Status = 0 0 0 0 ok 2008-Apr-24 23:49:56 STOP finish_task: Finishing task 'tracking current position' 2008-Apr-24 23:49:56 LOG5 finish_task: Level: (2) ID = <10520> Status = 0 0 0 0 ok 2008-Apr-24 23:49:56 DONE finish_task: DONE finished tracking: current position 2008-Apr-24 23:49:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 23:49:56 END end_task: Finishing task 'tracking current position' with status 'OK' 2008-Apr-24 23:49:56 LOG5 end_task: Level: (2) ID = <10520> Status = 0 0 0 0 ok 2008-Apr-24 23:49:56 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19' 2008-Apr-24 23:49:56 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Apr-24 23:49:56 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-24 23:49:56 LOG5 begin_task: Level: (2) ID = <10525> Status = 0 0 0 0 ok 2008-Apr-24 23:49:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-24 23:49:56 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-24 23:49:56 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-24 23:49:56 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-24 23:49:56 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-24 23:49:56 LOG5 begin_task: Level: (3) ID = <10526> Status = 0 0 0 0 ok 2008-Apr-24 23:50:20 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-24 23:50:20 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-24 23:50:20 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-24 23:50:20 LOG5 end_task: Level: (3) ID = <10526> Status = 0 0 0 0 ok 2008-Apr-24 23:50:20 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-24 23:50:20 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-24 23:50:20 LOG5 finish_task: Level: (2) ID = <10525> Status = 0 0 0 0 ok 2008-Apr-24 23:50:20 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-24 23:50:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 23:50:20 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-24 23:50:20 LOG5 end_task: Level: (2) ID = <10525> Status = 0 0 0 0 ok 2008-Apr-24 23:50:20 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-24 23:50:20 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Apr-24 23:50:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-24 23:50:20 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2008-Apr-24 23:50:20 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Apr-24 23:50:20 LOG5 begin_task: Level: (2) ID = <10527> Status = 0 0 0 0 ok 2008-Apr-24 23:50:20 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2008-Apr-24 23:50:20 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Apr-24 23:50:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Apr-24 23:50:21 START begin_task: Starting task 'selecting calibration type' 2008-Apr-24 23:50:21 LOG5 begin_task: Level: (3) ID = <10528> Status = 0 0 0 0 ok 2008-Apr-24 23:50:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-24 23:50:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-24 23:50:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:50:21 START begin_task: Starting task 'waiting on setcal' 2008-Apr-24 23:50:21 LOG5 begin_task: Level: (4) ID = <10529> Status = 0 0 0 0 ok 2008-Apr-24 23:50:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-24 23:50:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:50:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:50:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 23:50:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-24 23:50:21 LOG5 end_task: Level: (4) ID = <10529> Status = 0 0 0 0 ok 2008-Apr-24 23:50:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-24 23:50:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 23:50:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-24 23:50:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 23:50:21 LOG5 begin_task: Level: (4) ID = <10530> Status = 0 0 0 0 ok 2008-Apr-24 23:50:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 23:50:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 23:50:21 LOG5 end_task: Level: (4) ID = <10530> Status = 0 0 0 0 ok 2008-Apr-24 23:50:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 23:50:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-24 23:50:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-24 23:50:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-24 23:50:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-24 23:50:21 LOG5 begin_task: Level: (4) ID = <10531> Status = 0 0 0 0 ok 2008-Apr-24 23:50:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:50:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-24 23:50:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-24 23:50:21 LOG5 end_task: Level: (4) ID = <10531> Status = 0 0 0 0 ok 2008-Apr-24 23:50:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-24 23:50:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-24 23:50:21 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-24 23:50:21 LOG5 finish_task: Level: (3) ID = <10528> Status = 0 0 0 0 ok 2008-Apr-24 23:50:21 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-24 23:50:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:50:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-24 23:50:21 LOG5 end_task: Level: (3) ID = <10528> Status = 0 0 0 0 ok 2008-Apr-24 23:50:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:50:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:50:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:50:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen O'Neil 2008-Apr-24 23:50:21 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Apr-24 23:50:21 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-24 23:50:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 23:50:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 23:50:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 23:50:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 23:50:21 LOG5 begin_task: Level: (3) ID = <10532> Status = 0 0 0 0 ok 2008-Apr-24 23:50:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen O'Neil' 2008-Apr-24 23:50:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 23:50:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 23:50:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 23:50:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 23:50:21 LOG5 end_task: Level: (3) ID = <10532> Status = 0 0 0 0 ok 2008-Apr-24 23:50:21 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-24 23:50:21 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 23:50:21 LOG5 begin_task: Level: (3) ID = <10533> Status = 0 0 0 0 ok 2008-Apr-24 23:50:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-24 23:50:21 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-24 23:50:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-24 23:50:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-24 23:50:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:50:21 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-24 23:50:21 LOG5 begin_task: Level: (4) ID = <10534> Status = 0 0 0 0 ok 2008-Apr-24 23:50:22 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-24 23:50:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-24 23:50:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20080424.a2048.0013.fits 2008-Apr-24 23:50:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080424.a2048.0013.fits} 2008-Apr-24 23:50:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:50:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-24 23:50:24 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-24 23:50:24 LOG5 end_task: Level: (4) ID = <10534> Status = 0 0 0 0 ok 2008-Apr-24 23:50:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-24 23:50:24 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-24 23:50:24 LOG5 begin_task: Level: (4) ID = <10535> Status = 0 0 0 0 ok 2008-Apr-24 23:50:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-24 23:50:24 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 23:50:25 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 23:50:25 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 23:50:25 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-24 23:50:25 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-24 23:50:25 LOG5 begin_task: Level: (5) ID = <10536> Status = 0 0 0 0 ok 2008-Apr-24 23:50:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-24 23:50:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:50:25 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 7 dB 2008-Apr-24 23:50:25 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 4 dB 2008-Apr-24 23:50:25 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-24 23:50:25 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-24 23:50:25 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-24 23:50:25 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-24 23:50:25 LOG5 end_task: Level: (5) ID = <10536> Status = 0 0 0 0 ok 2008-Apr-24 23:50:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.956 0.926 ALFA beam 1: 0.935 0.916 2008-Apr-24 23:50:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.078 1.009 ALFA beam 3: 1.054 0.897 2008-Apr-24 23:50:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.998 1.047 ALFA beam 5: 1.082 0.954 2008-Apr-24 23:50:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.067 1.077 ALFA beam 7: 0.938 0.955 2008-Apr-24 23:50:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 23:50:25 LOG5 finish_task: Level: (4) ID = <10535> Status = 0 0 0 0 ok 2008-Apr-24 23:50:25 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-24 23:50:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:50:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 23:50:25 LOG5 end_task: Level: (4) ID = <10535> Status = 0 0 0 0 ok 2008-Apr-24 23:50:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-24 23:50:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-24 23:50:25 LOG5 finish_task: Level: (3) ID = <10533> Status = 0 0 0 0 ok 2008-Apr-24 23:50:25 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-24 23:50:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-24 23:50:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-24 23:50:25 LOG5 end_task: Level: (3) ID = <10533> Status = 0 0 0 0 ok 2008-Apr-24 23:50:25 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-24 23:50:25 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-24 23:50:25 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-24 23:50:25 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:50:25 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31757 J 2008-Apr-24 23:50:25 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:50:25 LOG2 antvel: Parameters to Doppler: Topocentric 100225 2008 115 0.0 2008-Apr-24 23:50:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:50:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-24 23:50:25 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-24 23:50:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:50:25 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:50:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 23:50:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:50:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 23:50:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:50:25 LOG5 begin_task: Level: (3) ID = <10537> Status = 0 0 0 0 ok 2008-Apr-24 23:50:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:50:25 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.625747 2008.3175724706568 18.999933 2008-Apr-24 23:50:25 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111109 7.549638888888890 2008-Apr-24 23:50:25 LOG4 log_alfabeam: ALFABEAM 1 12.828095900211371 7.635087523570539 2008-Apr-24 23:50:25 LOG4 log_alfabeam: ALFABEAM 2 12.821500357232747 7.635821297495561 2008-Apr-24 23:50:25 LOG4 log_alfabeam: ALFABEAM 3 12.817246081801708 7.550571524511826 2008-Apr-24 23:50:25 LOG4 log_alfabeam: ALFABEAM 4 12.819639402585784 7.464033564701798 2008-Apr-24 23:50:26 LOG4 log_alfabeam: ALFABEAM 5 12.826260267750248 7.463509262500888 2008-Apr-24 23:50:26 LOG4 log_alfabeam: ALFABEAM 6 12.830462411136526 7.549311942600907 2008-Apr-24 23:50:26 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500221 2008-Apr-24 23:50:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:50:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:50:26 LOG5 begin_task: Level: (4) ID = <10538> Status = 0 0 0 0 ok 2008-Apr-24 23:50:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:50:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 23:50:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:50:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:50:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:50:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13827.00 2008-Apr-24 23:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:50:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:50:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:50:37 LOG5 end_task: Level: (4) ID = <10538> Status = 0 0 0 0 ok 2008-Apr-24 23:50:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:50:37 LOG5 end_task: Level: (3) ID = <10537> Status = 0 0 0 0 ok 2008-Apr-24 23:50:37 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-24 23:50:37 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-24 23:50:37 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-24 23:50:37 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:50:37 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31757 J 2008-Apr-24 23:50:37 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:50:37 LOG2 antvel: Parameters to Doppler: Topocentric 100237 2008 115 0.0 2008-Apr-24 23:50:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:50:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-24 23:50:37 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-24 23:50:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:50:37 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:50:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 23:50:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:50:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 23:50:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:50:37 LOG5 begin_task: Level: (3) ID = <10539> Status = 0 0 0 0 ok 2008-Apr-24 23:50:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:50:37 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.629089 2008.3175728509138 18.999933 2008-Apr-24 23:50:37 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111109 7.549638888888895 2008-Apr-24 23:50:37 LOG4 log_alfabeam: ALFABEAM 1 12.828107416876538 7.634961099447431 2008-Apr-24 23:50:37 LOG4 log_alfabeam: ALFABEAM 2 12.821511953758442 7.635891540989669 2008-Apr-24 23:50:37 LOG4 log_alfabeam: ALFABEAM 3 12.817246235434252 7.550768267068900 2008-Apr-24 23:50:37 LOG4 log_alfabeam: ALFABEAM 4 12.819627841206046 7.464159947357149 2008-Apr-24 23:50:37 LOG4 log_alfabeam: ALFABEAM 5 12.826248589700569 7.463437743804489 2008-Apr-24 23:50:37 LOG4 log_alfabeam: ALFABEAM 6 12.830462368428108 7.549114126640831 2008-Apr-24 23:50:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500222 2008-Apr-24 23:50:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:50:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:50:38 LOG5 begin_task: Level: (4) ID = <10540> Status = 0 0 0 0 ok 2008-Apr-24 23:50:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:50:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 23:50:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:50:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:50:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:50:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13839.00 2008-Apr-24 23:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:50:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:50:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:50:49 LOG5 end_task: Level: (4) ID = <10540> Status = 0 0 0 0 ok 2008-Apr-24 23:50:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:50:49 LOG5 end_task: Level: (3) ID = <10539> Status = 0 0 0 0 ok 2008-Apr-24 23:50:49 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-24 23:50:49 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-24 23:50:49 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-24 23:50:49 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:50:49 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31757 J 2008-Apr-24 23:50:49 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:50:49 LOG2 antvel: Parameters to Doppler: Topocentric 100249 2008 115 0.0 2008-Apr-24 23:50:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:50:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-24 23:50:49 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-24 23:50:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:50:49 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:50:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 23:50:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:50:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 23:50:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:50:49 LOG5 begin_task: Level: (3) ID = <10541> Status = 0 0 0 0 ok 2008-Apr-24 23:50:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:50:49 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.632432 2008.3175732311709 18.999933 2008-Apr-24 23:50:49 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111109 7.549638888888894 2008-Apr-24 23:50:49 LOG4 log_alfabeam: ALFABEAM 1 12.828118866201477 7.634834887435730 2008-Apr-24 23:50:49 LOG4 log_alfabeam: ALFABEAM 2 12.821523508884075 7.635961134583054 2008-Apr-24 23:50:49 LOG4 log_alfabeam: ALFABEAM 3 12.817246414720946 7.550964142518263 2008-Apr-24 23:50:49 LOG4 log_alfabeam: ALFABEAM 4 12.819616347322972 7.464286120990455 2008-Apr-24 23:50:49 LOG4 log_alfabeam: ALFABEAM 5 12.826236953022045 7.463366885474000 2008-Apr-24 23:50:49 LOG4 log_alfabeam: ALFABEAM 6 12.830462299309666 7.548917174909509 2008-Apr-24 23:50:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500223 2008-Apr-24 23:50:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:50:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:50:50 LOG5 begin_task: Level: (4) ID = <10542> Status = 0 0 0 0 ok 2008-Apr-24 23:50:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:50:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 23:50:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:50:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-24 23:50:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13851.00 2008-Apr-24 23:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:51:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:51:01 LOG5 end_task: Level: (4) ID = <10542> Status = 0 0 0 0 ok 2008-Apr-24 23:51:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:51:01 LOG5 end_task: Level: (3) ID = <10541> Status = 0 0 0 0 ok 2008-Apr-24 23:51:01 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2008-Apr-24 23:51:01 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2008-Apr-24 23:51:01 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-24 23:51:01 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:51:01 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31757 J 2008-Apr-24 23:51:01 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:51:01 LOG2 antvel: Parameters to Doppler: Topocentric 100261 2008 115 0.0 2008-Apr-24 23:51:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:51:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-24 23:51:01 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-24 23:51:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:51:01 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:51:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-24 23:51:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:51:01 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 23:51:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:51:01 LOG5 begin_task: Level: (3) ID = <10543> Status = 0 0 0 0 ok 2008-Apr-24 23:51:01 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:51:01 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.635774 2008.3175736114281 18.999933 2008-Apr-24 23:51:01 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111109 7.549638888888887 2008-Apr-24 23:51:01 LOG4 log_alfabeam: ALFABEAM 1 12.828130241785447 7.634708965490134 2008-Apr-24 23:51:01 LOG4 log_alfabeam: ALFABEAM 2 12.821535015779496 7.636030042731214 2008-Apr-24 23:51:01 LOG4 log_alfabeam: ALFABEAM 3 12.817246619188488 7.551159037381720 2008-Apr-24 23:51:01 LOG4 log_alfabeam: ALFABEAM 4 12.819604927364198 7.464412007631719 2008-Apr-24 23:51:01 LOG4 log_alfabeam: ALFABEAM 5 12.826225364598081 7.463296723737866 2008-Apr-24 23:51:01 LOG4 log_alfabeam: ALFABEAM 6 12.830462204192928 7.548721201620348 2008-Apr-24 23:51:01 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500224 2008-Apr-24 23:51:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:51:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:51:02 LOG5 begin_task: Level: (4) ID = <10544> Status = 0 0 0 0 ok 2008-Apr-24 23:51:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:51:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-24 23:51:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:51:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:51:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:51:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13863.00 2008-Apr-24 23:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:51:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:51:13 LOG5 end_task: Level: (4) ID = <10544> Status = 0 0 0 0 ok 2008-Apr-24 23:51:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:51:13 LOG5 end_task: Level: (3) ID = <10543> Status = 0 0 0 0 ok 2008-Apr-24 23:51:13 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2008-Apr-24 23:51:13 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2008-Apr-24 23:51:13 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-24 23:51:13 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:51:13 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31757 J 2008-Apr-24 23:51:13 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:51:13 LOG2 antvel: Parameters to Doppler: Topocentric 100273 2008 115 0.0 2008-Apr-24 23:51:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:51:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-24 23:51:13 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-24 23:51:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:51:13 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:51:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-24 23:51:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:51:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 23:51:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:51:13 LOG5 begin_task: Level: (3) ID = <10545> Status = 0 0 0 0 ok 2008-Apr-24 23:51:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:51:13 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.639116 2008.3175739916851 18.999933 2008-Apr-24 23:51:13 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111109 7.549638888888886 2008-Apr-24 23:51:13 LOG4 log_alfabeam: ALFABEAM 1 12.828141547511015 7.634583298204707 2008-Apr-24 23:51:13 LOG4 log_alfabeam: ALFABEAM 2 12.821546477992985 7.636098292394523 2008-Apr-24 23:51:13 LOG4 log_alfabeam: ALFABEAM 3 12.817246848524702 7.551353014109462 2008-Apr-24 23:51:13 LOG4 log_alfabeam: ALFABEAM 4 12.819593577433992 7.464537642637163 2008-Apr-24 23:51:13 LOG4 log_alfabeam: ALFABEAM 5 12.826213820860373 7.463227231183263 2008-Apr-24 23:51:13 LOG4 log_alfabeam: ALFABEAM 6 12.830462083427454 7.548526144091590 2008-Apr-24 23:51:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500225 2008-Apr-24 23:51:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:51:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:51:14 LOG5 begin_task: Level: (4) ID = <10546> Status = 0 0 0 0 ok 2008-Apr-24 23:51:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:51:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-24 23:51:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:51:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:51:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:51:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13875.00 2008-Apr-24 23:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:51:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:51:25 LOG5 end_task: Level: (4) ID = <10546> Status = 0 0 0 0 ok 2008-Apr-24 23:51:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:51:25 LOG5 end_task: Level: (3) ID = <10545> Status = 0 0 0 0 ok 2008-Apr-24 23:51:25 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2008-Apr-24 23:51:25 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2008-Apr-24 23:51:25 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-24 23:51:25 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:51:25 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31757 J 2008-Apr-24 23:51:25 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:51:25 LOG2 antvel: Parameters to Doppler: Topocentric 100285 2008 115 0.0 2008-Apr-24 23:51:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:51:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-24 23:51:25 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-24 23:51:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:51:25 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:51:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-24 23:51:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:51:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 23:51:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:51:25 LOG5 begin_task: Level: (3) ID = <10547> Status = 0 0 0 0 ok 2008-Apr-24 23:51:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:51:25 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.642459 2008.3175743719421 18.999933 2008-Apr-24 23:51:25 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111109 7.549638888888886 2008-Apr-24 23:51:25 LOG4 log_alfabeam: ALFABEAM 1 12.828152787175354 7.634457850418906 2008-Apr-24 23:51:25 LOG4 log_alfabeam: ALFABEAM 2 12.821557899021496 7.636165909698353 2008-Apr-24 23:51:25 LOG4 log_alfabeam: ALFABEAM 3 12.817247102451168 7.551546134064695 2008-Apr-24 23:51:25 LOG4 log_alfabeam: ALFABEAM 4 12.819582293722227 7.464663061121459 2008-Apr-24 23:51:25 LOG4 log_alfabeam: ALFABEAM 5 12.826202318291879 7.463158381245147 2008-Apr-24 23:51:25 LOG4 log_alfabeam: ALFABEAM 6 12.830461937328131 7.548331940724137 2008-Apr-24 23:51:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500226 2008-Apr-24 23:51:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:51:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:51:26 LOG5 begin_task: Level: (4) ID = <10548> Status = 0 0 0 0 ok 2008-Apr-24 23:51:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:51:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-24 23:51:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:51:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:51:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:51:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13887.00 2008-Apr-24 23:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:51:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:51:37 LOG5 end_task: Level: (4) ID = <10548> Status = 0 0 0 0 ok 2008-Apr-24 23:51:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:51:37 LOG5 end_task: Level: (3) ID = <10547> Status = 0 0 0 0 ok 2008-Apr-24 23:51:37 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2008-Apr-24 23:51:37 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2008-Apr-24 23:51:37 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-24 23:51:37 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:51:37 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31757 J 2008-Apr-24 23:51:37 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:51:37 LOG2 antvel: Parameters to Doppler: Topocentric 100297 2008 115 0.0 2008-Apr-24 23:51:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:51:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-24 23:51:37 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-24 23:51:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:51:37 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:51:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-24 23:51:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:51:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 23:51:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:51:37 LOG5 begin_task: Level: (3) ID = <10549> Status = 0 0 0 0 ok 2008-Apr-24 23:51:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:51:37 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.645801 2008.3175747521991 18.999933 2008-Apr-24 23:51:37 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111109 7.549638888888900 2008-Apr-24 23:51:37 LOG4 log_alfabeam: ALFABEAM 1 12.828163954497830 7.634332699452067 2008-Apr-24 23:51:37 LOG4 log_alfabeam: ALFABEAM 2 12.821569272121573 7.636232860140378 2008-Apr-24 23:51:37 LOG4 log_alfabeam: ALFABEAM 3 12.817247380461787 7.551738285454045 2008-Apr-24 23:51:37 LOG4 log_alfabeam: ALFABEAM 4 12.819571082536012 7.464788185745567 2008-Apr-24 23:51:37 LOG4 log_alfabeam: ALFABEAM 5 12.826190863689053 7.463090209090947 2008-Apr-24 23:51:37 LOG4 log_alfabeam: ALFABEAM 6 12.830461766340894 7.548138704046918 2008-Apr-24 23:51:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500227 2008-Apr-24 23:51:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:51:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:51:38 LOG5 begin_task: Level: (4) ID = <10550> Status = 0 0 0 0 ok 2008-Apr-24 23:51:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:51:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-24 23:51:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:51:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:51:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:51:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13899.00 2008-Apr-24 23:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:51:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:51:49 LOG5 end_task: Level: (4) ID = <10550> Status = 0 0 0 0 ok 2008-Apr-24 23:51:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:51:49 LOG5 end_task: Level: (3) ID = <10549> Status = 0 0 0 0 ok 2008-Apr-24 23:51:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-24 23:51:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-24 23:51:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-24 23:51:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 23:51:49 LOG5 begin_task: Level: (3) ID = <10551> Status = 0 0 0 0 ok 2008-Apr-24 23:51:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 23:51:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-24 23:51:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 23:51:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 23:51:49 LOG5 end_task: Level: (3) ID = <10551> Status = 0 0 0 0 ok 2008-Apr-24 23:51:49 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2008-Apr-24 23:51:49 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2008-Apr-24 23:51:49 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-24 23:51:49 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:51:49 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31758 J 2008-Apr-24 23:51:49 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:51:49 LOG2 antvel: Parameters to Doppler: Topocentric 100309 2008 115 0.0 2008-Apr-24 23:51:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:51:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-24 23:51:49 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-24 23:51:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:51:49 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:51:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 23:51:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:51:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 23:51:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:51:49 LOG5 begin_task: Level: (3) ID = <10552> Status = 0 0 0 0 ok 2008-Apr-24 23:51:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:51:49 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.649144 2008.3175751324561 18.999933 2008-Apr-24 23:51:49 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111110 7.549638888888897 2008-Apr-24 23:51:49 LOG4 log_alfabeam: ALFABEAM 1 12.828175056603504 7.634207772619900 2008-Apr-24 23:51:49 LOG4 log_alfabeam: ALFABEAM 2 12.821580604190805 7.636299189693267 2008-Apr-24 23:51:49 LOG4 log_alfabeam: ALFABEAM 3 12.817247682372543 7.551929587024933 2008-Apr-24 23:51:49 LOG4 log_alfabeam: ALFABEAM 4 12.819559936724206 7.464913089141118 2008-Apr-24 23:51:49 LOG4 log_alfabeam: ALFABEAM 5 12.826179450109672 7.463022667944588 2008-Apr-24 23:51:49 LOG4 log_alfabeam: ALFABEAM 6 12.830461570718182 7.547946314748987 2008-Apr-24 23:51:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500228 2008-Apr-24 23:51:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:51:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:51:50 LOG5 begin_task: Level: (4) ID = <10553> Status = 0 0 0 0 ok 2008-Apr-24 23:51:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:51:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 23:51:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:51:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:51:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:51:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13911.00 2008-Apr-24 23:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:51:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.602 > 1.4)! 2008-Apr-24 23:51:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.371 1.187 1.316 1.247 2008-Apr-24 23:51:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.478 1.433 1.543 1.252 2008-Apr-24 23:51:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.453 1.484 1.602 1.327 2008-Apr-24 23:51:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.512 1.511 1.330 1.339 2008-Apr-24 23:51:54 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.604 (still bad) 2008-Apr-24 23:51:56 INFO5 check_wapp_levels: WAPP power levels are between 1.186 and 1.603 (still bad) 2008-Apr-24 23:51:58 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.605 (still bad) 2008-Apr-24 23:52:00 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.607 (still bad) 2008-Apr-24 23:52:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:52:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:52:01 LOG5 end_task: Level: (4) ID = <10553> Status = 0 0 0 0 ok 2008-Apr-24 23:52:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:52:01 LOG5 end_task: Level: (3) ID = <10552> Status = 0 0 0 0 ok 2008-Apr-24 23:52:01 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2008-Apr-24 23:52:01 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2008-Apr-24 23:52:01 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-24 23:52:01 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:52:01 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31758 J 2008-Apr-24 23:52:01 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:52:01 LOG2 antvel: Parameters to Doppler: Topocentric 100321 2008 115 0.0 2008-Apr-24 23:52:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:52:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-24 23:52:01 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-24 23:52:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:52:01 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:52:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 23:52:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:52:01 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 23:52:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:52:01 LOG5 begin_task: Level: (3) ID = <10554> Status = 0 0 0 0 ok 2008-Apr-24 23:52:01 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:52:01 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.652486 2008.3175755127133 18.999933 2008-Apr-24 23:52:01 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111107 7.549638888888895 2008-Apr-24 23:52:01 LOG4 log_alfabeam: ALFABEAM 1 12.828186087290364 7.634083146815577 2008-Apr-24 23:52:01 LOG4 log_alfabeam: ALFABEAM 2 12.821591888542994 7.636364864532162 2008-Apr-24 23:52:01 LOG4 log_alfabeam: ALFABEAM 3 12.817248007656383 7.552119928092313 2008-Apr-24 23:52:01 LOG4 log_alfabeam: ALFABEAM 4 12.819548862515042 7.465037694392487 2008-Apr-24 23:52:01 LOG4 log_alfabeam: ALFABEAM 5 12.826168084292748 7.462955792283681 2008-Apr-24 23:52:01 LOG4 log_alfabeam: ALFABEAM 6 12.830461350927768 7.547754884250904 2008-Apr-24 23:52:01 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500229 2008-Apr-24 23:52:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:52:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:52:02 LOG5 begin_task: Level: (4) ID = <10555> Status = 0 0 0 0 ok 2008-Apr-24 23:52:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:52:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 23:52:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:52:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:52:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:52:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13923.00 2008-Apr-24 23:52:03 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.607 (still bad) 2008-Apr-24 23:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:05 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 1.519 (still bad) 2008-Apr-24 23:52:07 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.518 (still bad) 2008-Apr-24 23:52:09 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.518 (still bad) 2008-Apr-24 23:52:11 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.521 (still bad) 2008-Apr-24 23:52:13 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.521 (still bad) 2008-Apr-24 23:52:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:52:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:52:13 LOG5 end_task: Level: (4) ID = <10555> Status = 0 0 0 0 ok 2008-Apr-24 23:52:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:52:13 LOG5 end_task: Level: (3) ID = <10554> Status = 0 0 0 0 ok 2008-Apr-24 23:52:13 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2008-Apr-24 23:52:13 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2008-Apr-24 23:52:13 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-24 23:52:13 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:52:13 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31758 J 2008-Apr-24 23:52:13 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:52:13 LOG2 antvel: Parameters to Doppler: Topocentric 100333 2008 115 0.0 2008-Apr-24 23:52:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:52:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-24 23:52:13 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-24 23:52:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:52:13 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:52:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 23:52:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:52:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 23:52:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:52:13 LOG5 begin_task: Level: (3) ID = <10556> Status = 0 0 0 0 ok 2008-Apr-24 23:52:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:52:13 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.655829 2008.3175758929704 18.999933 2008-Apr-24 23:52:13 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111109 7.549638888888886 2008-Apr-24 23:52:13 LOG4 log_alfabeam: ALFABEAM 1 12.828197053597997 7.633958749556170 2008-Apr-24 23:52:13 LOG4 log_alfabeam: ALFABEAM 2 12.821603132026576 7.636429929773644 2008-Apr-24 23:52:13 LOG4 log_alfabeam: ALFABEAM 3 12.817248356165308 7.552309426339348 2008-Apr-24 23:52:13 LOG4 log_alfabeam: ALFABEAM 4 12.819537852843027 7.465162073934073 2008-Apr-24 23:52:13 LOG4 log_alfabeam: ALFABEAM 5 12.826156759345110 7.462889536201008 2008-Apr-24 23:52:13 LOG4 log_alfabeam: ALFABEAM 6 12.830461107185197 7.547564294300954 2008-Apr-24 23:52:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500230 2008-Apr-24 23:52:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:52:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:52:14 LOG5 begin_task: Level: (4) ID = <10557> Status = 0 0 0 0 ok 2008-Apr-24 23:52:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:52:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 23:52:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:52:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:52:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:52:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13935.00 2008-Apr-24 23:52:15 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.521 (still bad) 2008-Apr-24 23:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:17 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 1.513 (still bad) 2008-Apr-24 23:52:19 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.518 (still bad) 2008-Apr-24 23:52:21 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.515 (still bad) 2008-Apr-24 23:52:23 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 1.512 (still bad) 2008-Apr-24 23:52:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:52:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:52:25 LOG5 end_task: Level: (4) ID = <10557> Status = 0 0 0 0 ok 2008-Apr-24 23:52:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:52:25 LOG5 end_task: Level: (3) ID = <10556> Status = 0 0 0 0 ok 2008-Apr-24 23:52:25 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2008-Apr-24 23:52:25 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2008-Apr-24 23:52:25 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2008-Apr-24 23:52:25 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:52:25 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31758 J 2008-Apr-24 23:52:25 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:52:25 LOG2 antvel: Parameters to Doppler: Topocentric 100345 2008 115 0.0 2008-Apr-24 23:52:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:52:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2008-Apr-24 23:52:25 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2008-Apr-24 23:52:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:52:25 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:52:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-24 23:52:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:52:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 23:52:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:52:25 LOG5 begin_task: Level: (3) ID = <10558> Status = 0 0 0 0 ok 2008-Apr-24 23:52:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:52:25 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.659171 2008.3175762732274 18.999933 2008-Apr-24 23:52:25 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111109 7.549638888888889 2008-Apr-24 23:52:25 LOG4 log_alfabeam: ALFABEAM 1 12.828207949401877 7.633834657306867 2008-Apr-24 23:52:25 LOG4 log_alfabeam: ALFABEAM 2 12.821614328012210 7.636494352256801 2008-Apr-24 23:52:25 LOG4 log_alfabeam: ALFABEAM 3 12.817248727352073 7.552497972177544 2008-Apr-24 23:52:25 LOG4 log_alfabeam: ALFABEAM 4 12.819526913858670 7.465286151275493 2008-Apr-24 23:52:25 LOG4 log_alfabeam: ALFABEAM 5 12.826145481948755 7.462823933498171 2008-Apr-24 23:52:25 LOG4 log_alfabeam: ALFABEAM 6 12.830460839979382 7.547374655222956 2008-Apr-24 23:52:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500231 2008-Apr-24 23:52:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:52:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:52:26 LOG5 begin_task: Level: (4) ID = <10559> Status = 0 0 0 0 ok 2008-Apr-24 23:52:26 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.517 (still bad) 2008-Apr-24 23:52:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:52:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2008-Apr-24 23:52:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:52:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:52:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:52:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13947.00 2008-Apr-24 23:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:28 INFO5 check_wapp_levels: WAPP power levels are between 1.165 and 1.516 (still bad) 2008-Apr-24 23:52:30 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 1.501 (still bad) 2008-Apr-24 23:52:32 INFO5 check_wapp_levels: WAPP power levels are between 1.164 and 1.503 (still bad) 2008-Apr-24 23:52:34 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 1.506 (still bad) 2008-Apr-24 23:52:36 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 1.504 (still bad) 2008-Apr-24 23:52:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:52:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:52:37 LOG5 end_task: Level: (4) ID = <10559> Status = 0 0 0 0 ok 2008-Apr-24 23:52:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:52:37 LOG5 end_task: Level: (3) ID = <10558> Status = 0 0 0 0 ok 2008-Apr-24 23:52:37 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2008-Apr-24 23:52:37 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2008-Apr-24 23:52:37 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2008-Apr-24 23:52:37 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:52:37 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31758 J 2008-Apr-24 23:52:37 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:52:37 LOG2 antvel: Parameters to Doppler: Topocentric 100357 2008 115 0.0 2008-Apr-24 23:52:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:52:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2008-Apr-24 23:52:37 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2008-Apr-24 23:52:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:52:37 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:52:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-24 23:52:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:52:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 23:52:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:52:37 LOG5 begin_task: Level: (3) ID = <10560> Status = 0 0 0 0 ok 2008-Apr-24 23:52:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:52:37 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.662514 2008.3175766534844 18.999933 2008-Apr-24 23:52:37 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111109 7.549638888888878 2008-Apr-24 23:52:37 LOG4 log_alfabeam: ALFABEAM 1 12.828218781657045 7.633710797794350 2008-Apr-24 23:52:37 LOG4 log_alfabeam: ALFABEAM 2 12.821625483299162 7.636558176256559 2008-Apr-24 23:52:37 LOG4 log_alfabeam: ALFABEAM 3 12.817249121103719 7.552685682232010 2008-Apr-24 23:52:37 LOG4 log_alfabeam: ALFABEAM 4 12.819516038581154 7.465409998645506 2008-Apr-24 23:52:37 LOG4 log_alfabeam: ALFABEAM 5 12.826134245259526 7.462758939122249 2008-Apr-24 23:52:37 LOG4 log_alfabeam: ALFABEAM 6 12.830460549489878 7.547185849818399 2008-Apr-24 23:52:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500232 2008-Apr-24 23:52:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:52:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:52:38 LOG5 begin_task: Level: (4) ID = <10561> Status = 0 0 0 0 ok 2008-Apr-24 23:52:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:52:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2008-Apr-24 23:52:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:52:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:52:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:52:38 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 1.503 (still bad) 2008-Apr-24 23:52:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13959.00 2008-Apr-24 23:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:40 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.503 (still bad) 2008-Apr-24 23:52:42 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 1.499 (still bad) 2008-Apr-24 23:52:44 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.496 (still bad) 2008-Apr-24 23:52:46 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.497 (still bad) 2008-Apr-24 23:52:48 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.498 (still bad) 2008-Apr-24 23:52:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:52:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:52:49 LOG5 end_task: Level: (4) ID = <10561> Status = 0 0 0 0 ok 2008-Apr-24 23:52:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:52:49 LOG5 end_task: Level: (3) ID = <10560> Status = 0 0 0 0 ok 2008-Apr-24 23:52:49 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2008-Apr-24 23:52:49 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2008-Apr-24 23:52:49 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2008-Apr-24 23:52:49 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:52:49 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31758 J 2008-Apr-24 23:52:49 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:52:49 LOG2 antvel: Parameters to Doppler: Topocentric 100369 2008 115 0.0 2008-Apr-24 23:52:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:52:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2008-Apr-24 23:52:49 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2008-Apr-24 23:52:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:52:49 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:52:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-24 23:52:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:52:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 23:52:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:52:49 LOG5 begin_task: Level: (3) ID = <10562> Status = 0 0 0 0 ok 2008-Apr-24 23:52:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:52:49 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.665856 2008.3175770337414 18.999933 2008-Apr-24 23:52:49 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111110 7.549638888888882 2008-Apr-24 23:52:49 LOG4 log_alfabeam: ALFABEAM 1 12.828229544315350 7.633587247054180 2008-Apr-24 23:52:49 LOG4 log_alfabeam: ALFABEAM 2 12.821636591314485 7.636621369262753 2008-Apr-24 23:52:49 LOG4 log_alfabeam: ALFABEAM 3 12.817249536853490 7.552872447999103 2008-Apr-24 23:52:49 LOG4 log_alfabeam: ALFABEAM 4 12.819505233084399 7.465533539980764 2008-Apr-24 23:52:49 LOG4 log_alfabeam: ALFABEAM 5 12.826123055902848 7.462694586212185 2008-Apr-24 23:52:49 LOG4 log_alfabeam: ALFABEAM 6 12.830460236226060 7.546997987326000 2008-Apr-24 23:52:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500233 2008-Apr-24 23:52:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:52:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:52:50 LOG5 begin_task: Level: (4) ID = <10563> Status = 0 0 0 0 ok 2008-Apr-24 23:52:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:52:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2008-Apr-24 23:52:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:52:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:52:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:52:50 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 1.498 (still bad) 2008-Apr-24 23:52:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13971.00 2008-Apr-24 23:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:52:52 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.498 (still bad) 2008-Apr-24 23:52:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.503 > 1.4)! 2008-Apr-24 23:52:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.317 1.172 1.250 1.229 2008-Apr-24 23:52:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.461 1.392 1.458 1.224 2008-Apr-24 23:52:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.392 1.458 1.503 1.278 2008-Apr-24 23:52:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.486 1.493 1.303 1.324 2008-Apr-24 23:52:56 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 1.500 (still bad) 2008-Apr-24 23:52:58 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.500 (still bad) 2008-Apr-24 23:53:00 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.502 (still bad) 2008-Apr-24 23:53:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:53:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:53:01 LOG5 end_task: Level: (4) ID = <10563> Status = 0 0 0 0 ok 2008-Apr-24 23:53:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:53:01 LOG5 end_task: Level: (3) ID = <10562> Status = 0 0 0 0 ok 2008-Apr-24 23:53:01 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2008-Apr-24 23:53:01 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2008-Apr-24 23:53:01 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2008-Apr-24 23:53:01 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:53:01 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31758 J 2008-Apr-24 23:53:01 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:53:01 LOG2 antvel: Parameters to Doppler: Topocentric 100381 2008 115 0.0 2008-Apr-24 23:53:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:53:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2008-Apr-24 23:53:01 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2008-Apr-24 23:53:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:53:01 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:53:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-24 23:53:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:53:01 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-24 23:53:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:53:01 LOG5 begin_task: Level: (3) ID = <10564> Status = 0 0 0 0 ok 2008-Apr-24 23:53:01 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:53:01 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.669199 2008.3175774139986 18.999933 2008-Apr-24 23:53:01 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111109 7.549638888888884 2008-Apr-24 23:53:01 LOG4 log_alfabeam: ALFABEAM 1 12.828240244248258 7.633463933030666 2008-Apr-24 23:53:01 LOG4 log_alfabeam: ALFABEAM 2 12.821647658808379 7.636683974722900 2008-Apr-24 23:53:01 LOG4 log_alfabeam: ALFABEAM 3 12.817249974522564 7.553058385052335 2008-Apr-24 23:53:01 LOG4 log_alfabeam: ALFABEAM 4 12.819494490471312 7.465656847296318 2008-Apr-24 23:53:01 LOG4 log_alfabeam: ALFABEAM 5 12.826111907083549 7.462630830554973 2008-Apr-24 23:53:01 LOG4 log_alfabeam: ALFABEAM 6 12.830459900332423 7.546810951594292 2008-Apr-24 23:53:01 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500234 2008-Apr-24 23:53:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:53:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:53:02 LOG5 begin_task: Level: (4) ID = <10565> Status = 0 0 0 0 ok 2008-Apr-24 23:53:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:53:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2008-Apr-24 23:53:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:53:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:53:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:53:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13983.00 2008-Apr-24 23:53:03 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.500 (still bad) 2008-Apr-24 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:53:05 INFO5 check_wapp_levels: WAPP power levels are between 1.173 and 1.503 (still bad) 2008-Apr-24 23:53:07 INFO5 check_wapp_levels: WAPP power levels are between 1.173 and 1.501 (still bad) 2008-Apr-24 23:53:09 INFO5 check_wapp_levels: WAPP power levels are between 1.173 and 1.504 (still bad) 2008-Apr-24 23:53:11 INFO5 check_wapp_levels: WAPP power levels are between 1.175 and 1.504 (still bad) 2008-Apr-24 23:53:13 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 1.503 (still bad) 2008-Apr-24 23:53:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:53:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:53:13 LOG5 end_task: Level: (4) ID = <10565> Status = 0 0 0 0 ok 2008-Apr-24 23:53:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:53:13 LOG5 end_task: Level: (3) ID = <10564> Status = 0 0 0 0 ok 2008-Apr-24 23:53:13 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Apr-24 23:53:13 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-24 23:53:13 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-24 23:53:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-24 23:53:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-24 23:53:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-24 23:53:13 LOG5 begin_task: Level: (3) ID = <10566> Status = 0 0 0 0 ok 2008-Apr-24 23:53:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-24 23:53:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-24 23:53:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-24 23:53:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-24 23:53:13 LOG5 end_task: Level: (3) ID = <10566> Status = 0 0 0 0 ok 2008-Apr-24 23:53:13 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-24 23:53:13 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2008-Apr-24 23:53:13 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2008-Apr-24 23:53:13 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2008-Apr-24 23:53:13 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:53:13 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31758 J 2008-Apr-24 23:53:13 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:53:13 LOG2 antvel: Parameters to Doppler: Topocentric 100393 2008 115 0.0 2008-Apr-24 23:53:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:53:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2008-Apr-24 23:53:13 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2008-Apr-24 23:53:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:53:13 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:53:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 23:53:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:53:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 23:53:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:53:13 LOG5 begin_task: Level: (3) ID = <10567> Status = 0 0 0 0 ok 2008-Apr-24 23:53:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:53:13 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.672541 2008.3175777942556 18.999933 2008-Apr-24 23:53:13 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111107 7.549638888888887 2008-Apr-24 23:53:13 LOG4 log_alfabeam: ALFABEAM 1 12.828250875482860 7.633340931328251 2008-Apr-24 23:53:13 LOG4 log_alfabeam: ALFABEAM 2 12.821658679263848 7.636745960764562 2008-Apr-24 23:53:13 LOG4 log_alfabeam: ALFABEAM 3 12.817250433525333 7.553243385961180 2008-Apr-24 23:53:13 LOG4 log_alfabeam: ALFABEAM 4 12.819483816740339 7.465779844957306 2008-Apr-24 23:53:13 LOG4 log_alfabeam: ALFABEAM 5 12.826100805370915 7.462567704640107 2008-Apr-24 23:53:13 LOG4 log_alfabeam: ALFABEAM 6 12.830459542338101 7.546624850788296 2008-Apr-24 23:53:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500235 2008-Apr-24 23:53:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:53:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:53:14 LOG5 begin_task: Level: (4) ID = <10568> Status = 0 0 0 0 ok 2008-Apr-24 23:53:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:53:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2008-Apr-24 23:53:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:53:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:53:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:53:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13995.00 2008-Apr-24 23:53:15 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.503 (still bad) 2008-Apr-24 23:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:53:17 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 23:53:17.297 (seconds: 85997.297)!} 2008-Apr-24 23:53:17 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 23:53:17.297 (seconds: 85997.297)! 2008-Apr-24 23:53:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.942 and 1.182 2008-Apr-24 23:53:18 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 85996.0 to 85997.0! 2008-Apr-24 23:53:19 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (85996.0 - 85998.0)! 2008-Apr-24 23:53:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:53:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:53:25 LOG5 end_task: Level: (4) ID = <10568> Status = 0 0 0 0 ok 2008-Apr-24 23:53:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:53:25 LOG5 end_task: Level: (3) ID = <10567> Status = 0 0 0 0 ok 2008-Apr-24 23:53:25 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2008-Apr-24 23:53:25 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2008-Apr-24 23:53:25 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2008-Apr-24 23:53:25 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:53:25 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31758 J 2008-Apr-24 23:53:25 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:53:25 LOG2 antvel: Parameters to Doppler: Topocentric 100405 2008 115 0.0 2008-Apr-24 23:53:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:53:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2008-Apr-24 23:53:25 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2008-Apr-24 23:53:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:53:25 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:53:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 23:53:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:53:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 23:53:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:53:25 LOG5 begin_task: Level: (3) ID = <10569> Status = 0 0 0 0 ok 2008-Apr-24 23:53:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:53:25 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.675884 2008.3175781745126 18.999933 2008-Apr-24 23:53:25 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111109 7.549638888888889 2008-Apr-24 23:53:25 LOG4 log_alfabeam: ALFABEAM 1 12.828261444808033 7.633218170116678 2008-Apr-24 23:53:25 LOG4 log_alfabeam: ALFABEAM 2 12.821669659382044 7.636807370022036 2008-Apr-24 23:53:25 LOG4 log_alfabeam: ALFABEAM 3 12.817250913816236 7.553427565254231 2008-Apr-24 23:53:25 LOG4 log_alfabeam: ALFABEAM 4 12.819473205077163 7.465902604757315 2008-Apr-24 23:53:25 LOG4 log_alfabeam: ALFABEAM 5 12.826089744018745 7.462505165080259 2008-Apr-24 23:53:25 LOG4 log_alfabeam: ALFABEAM 6 12.830459162353465 7.546439569797240 2008-Apr-24 23:53:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500236 2008-Apr-24 23:53:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:53:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:53:26 LOG5 begin_task: Level: (4) ID = <10570> Status = 0 0 0 0 ok 2008-Apr-24 23:53:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:53:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2008-Apr-24 23:53:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:53:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:53:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:53:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14007.00 2008-Apr-24 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-24 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-24 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-24 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-24 23:53:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-24 23:53:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-24 23:53:37 LOG5 end_task: Level: (4) ID = <10570> Status = 0 0 0 0 ok 2008-Apr-24 23:53:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-24 23:53:37 LOG5 end_task: Level: (3) ID = <10569> Status = 0 0 0 0 ok 2008-Apr-24 23:53:37 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2008-Apr-24 23:53:37 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2008-Apr-24 23:53:37 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2008-Apr-24 23:53:37 LOG5 antvel: Calling 'antvel 124925.900000 73258.700000 J 0' 2008-Apr-24 23:53:37 LOG2 antvel: Precessing RA = 12:49:25.9 Dec = +07:32:58.7 Epoch = 2008.31758 J 2008-Apr-24 23:53:37 LOG2 antvel: Computed apparent RA = 12:49:52.9 Dec = +07:30:05.4 2008-Apr-24 23:53:37 LOG2 antvel: Parameters to Doppler: Topocentric 100417 2008 115 0.0 2008-Apr-24 23:53:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-24 23:53:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2008-Apr-24 23:53:37 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2008-Apr-24 23:53:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-24 23:53:37 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-24 23:53:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 23:53:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-24 23:53:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-24 23:53:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-24 23:53:37 LOG5 begin_task: Level: (3) ID = <10571> Status = 0 0 0 0 ok 2008-Apr-24 23:53:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-24 23:53:37 LOG5 log_alfabeam: Parameters: 12.823861111111109 7.5496388888888877 13.679226 2008.3175785547696 18.999933 2008-Apr-24 23:53:37 LOG4 log_alfabeam: ALFABEAM 0 12.823861111111109 7.549638888888887 2008-Apr-24 23:53:37 LOG4 log_alfabeam: ALFABEAM 1 12.828271946324998 7.633095724567906 2008-Apr-24 23:53:37 LOG4 log_alfabeam: ALFABEAM 2 12.821680592701499 7.636868171247896 2008-Apr-24 23:53:37 LOG4 log_alfabeam: ALFABEAM 3 12.817251414791448 7.553610816562426 2008-Apr-24 23:53:37 LOG4 log_alfabeam: ALFABEAM 4 12.819462661405833 7.466025051491327 2008-Apr-24 23:53:37 LOG4 log_alfabeam: ALFABEAM 5 12.826078729540576 7.462443243728342 2008-Apr-24 23:53:37 LOG4 log_alfabeam: ALFABEAM 6 12.830458760926716 7.546255215724085 2008-Apr-24 23:53:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811500237 2008-Apr-24 23:53:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-24 23:53:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-24 23:53:38 LOG5 begin_task: Level: (4) ID = <10572> Status = 0 0 0 0 ok 2008-Apr-24 23:53:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-24 23:53:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2008-Apr-24 23:53:38 LOG4 got_cormsg