2008-Apr-14 22:06:37 BEGIN executive: CIMA executive starting ... 2008-Apr-14 22:06:37 NOTE executive: STARTING NEW CIMA SESSION 2008-Apr-14 22:06:37 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-04-12 13:20 2008-Apr-14 22:06:37 INFO4 executive: This is an ON-LINE session 2008-Apr-14 22:06:37 INFO4 executive: This is a REMOTE session 2008-Apr-14 22:06:37 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Apr-14 22:06:37 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Karen ONeil' 2008-Apr-14 22:06:37 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20080414' 2008-Apr-14 22:06:37 LOG2 log_preferences: Currently applied preferences: 2008-Apr-14 22:06:37 LOG2 log_preferences: prefs(dailylog) = daily 2008-Apr-14 22:06:37 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Apr-14 22:06:37 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Apr-14 22:06:37 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Apr-14 22:06:37 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Apr-14 22:06:37 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Apr-14 22:06:37 LOG2 log_preferences: prefs(logcolours) = full 2008-Apr-14 22:06:37 LOG2 log_preferences: prefs(displaylevel) = INFO3 2008-Apr-14 22:06:37 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Apr-14 22:06:37 LOG2 log_preferences: prefs(displayformat) = short 2008-Apr-14 22:06:37 LOG2 log_preferences: prefs(logformat) = new 2008-Apr-14 22:06:37 LOG2 log_preferences: prefs(fontsize) = 4 2008-Apr-14 22:06:37 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-14 22:06:37 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-14 22:06:37 ALERT executive: CIMA executive ready 2008-Apr-14 22:06:40 NOTE frontend: CIMA frontend ready 2008-Apr-14 22:06:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:06:41 LOG4 got_cormsg: From DATATAKING: setup 2008-Apr-14 22:06:45 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Apr-14 22:06:45 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Apr-14 22:06:45 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-14 22:06:45 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-14 22:06:45 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-14 22:06:45 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-14 22:06:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-14 22:06:45 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-14 22:06:45 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-14 22:06:45 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-14 22:06:45 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-14 22:06:45 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-14 22:06:45 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Apr-14 22:06:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-14 22:06:45 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-14 22:06:45 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Apr-14 22:06:48 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Apr-14 22:06:48 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: online.. exit cmd to quit. 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: 2008-Apr-14 22:06:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:06:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:06:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:06:56 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-14 22:06:56 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-14 22:06:56 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-14 22:06:56 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-14 22:06:56 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-14 22:06:56 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-14 22:06:56 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-14 22:06:56 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-14 22:06:56 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-14 22:06:56 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-14 22:06:59 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-14 22:06:59 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-14 22:07:00 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-14 22:07:00 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-14 22:08:17 INFO1 CIMA-run_command_file: Transferring command file '080414_obs.cmd ' to executive ... 2008-Apr-14 22:08:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2008-Apr-14 22:08:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2008-Apr-14 22:08:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {FIXEDDRIFT az=313.35 alfaangle=58.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_070 ra=120900.00 dec=71630.00} 2008-Apr-14 22:08:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 11 {FIXEDDRIFT az=332.66 alfaangle=41.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_072 ra=120900.00 dec=71330.00} 2008-Apr-14 22:08:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 15 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_074 ra=120900.00 dec=71030.00} 2008-Apr-14 22:08:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 19 {FIXEDDRIFT az=27.14 alfaangle=-3.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_076 ra=120900.00 dec=70730.00} 2008-Apr-14 22:08:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 23 {FIXEDDRIFT az=46.14 alfaangle=-20.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_078 ra=120900.00 dec=70430.00} 2008-Apr-14 22:08:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 27 {FIXEDDRIFT az=48.27 alfaangle=-22.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p1_055 ra=122900.00 dec=73900.00} 2008-Apr-14 22:08:17 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-14 22:08:17 LOG4 exec_msg: From OBSERVER: run_command_file 080414_obs.cmd 1 1 8 2008-Apr-14 22:08:17 LOG4 run_command_file: Calling 'run_command_file 080414_obs.cmd 1 1 8' 2008-Apr-14 22:08:17 BEGIN begin_task: Starting task 'running command file '080414_obs.cmd'' 2008-Apr-14 22:08:17 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-14 22:08:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '080414_obs.cmd' ...} 2008-Apr-14 22:08:17 NOTE run_command_file: Starting execution of command file '080414_obs.cmd' from line 1 2008-Apr-14 22:08:17 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2008-Apr-14 22:08:17 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-14 22:08:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-14 22:08:17 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-14 22:08:17 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-14 22:08:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-14 22:08:19 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-14 22:08:19 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-14 22:08:19 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-14 22:08:19 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-14 22:08:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-14 22:08:19 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-14 22:08:20 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-14 22:08:20 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-14 22:08:20 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-14 22:08:20 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-14 22:08:20 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-14 22:08:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-14 22:08:20 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-14 22:08:20 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-14 22:08:20 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-14 22:08:20 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-14 22:08:20 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-14 22:08:20 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-14 22:08:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-14 22:08:20 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-14 22:08:20 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-14 22:08:20 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-14 22:08:20 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-14 22:08:20 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-14 22:08:20 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-14 22:08:20 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-14 22:08:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-14 22:08:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-14 22:08:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-14 22:08:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-14 22:08:20 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-14 22:08:20 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-14 22:08:20 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-14 22:08:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-14 22:08:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-14 22:08:20 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-14 22:08:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-14 22:08:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-14 22:08:21 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-14 22:08:21 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-14 22:08:21 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-14 22:08:21 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-14 22:08:21 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-14 22:08:21 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-14 22:08:21 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-14 22:08:21 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-14 22:08:21 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-14 22:08:21 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-14 22:08:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-14 22:08:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-14 22:08:21 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-14 22:08:21 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Apr-14 22:08:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-14 22:08:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-14 22:08:36 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-14 22:08:36 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-14 22:08:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-14 22:08:36 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-14 22:08:36 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-14 22:08:36 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-14 22:08:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-14 22:08:36 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-14 22:08:36 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-14 22:08:37 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-14 22:08:37 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-14 22:08:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-14 22:08:37 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-14 22:08:37 START begin_task: Starting task 'selecting calibration port' 2008-Apr-14 22:08:37 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-14 22:08:37 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-14 22:08:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-14 22:08:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-14 22:08:37 START begin_task: Starting task 'waiting on calport' 2008-Apr-14 22:08:39 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-14 22:08:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:39 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-14 22:08:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-14 22:08:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-14 22:08:40 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-14 22:08:40 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-14 22:08:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-14 22:08:40 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-14 22:08:40 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-14 22:08:40 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-14 22:08:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-14 22:08:40 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-14 22:08:40 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen ONeil 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen ONeil 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen ONeil 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen ONeil 2008-Apr-14 22:08:40 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-14 22:08:40 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-14 22:08:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-14 22:08:40 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-14 22:08:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-14 22:08:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-14 22:08:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-14 22:08:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-14 22:08:40 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen ONeil 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen ONeil 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen ONeil 2008-Apr-14 22:08:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen ONeil 2008-Apr-14 22:08:40 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-14 22:08:40 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-14 22:08:40 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-14 22:08:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-14 22:08:40 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-14 22:08:40 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-14 22:08:40 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2008-Apr-14 22:08:40 COMMAND run_command_line: EXECUTING command 7: 'FIXEDDRIFT az=313.35 alfaangle=58.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_070 ra=120900.00 dec=71630.00' 2008-Apr-14 22:08:40 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2008-Apr-14 22:08:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen ONeil' 2008-Apr-14 22:08:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-14 22:08:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-14 22:08:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20080414.a2048.0002.fits 2008-Apr-14 22:08:41 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080414.a2048.0002.fits} 2008-Apr-14 22:08:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen ONeil' 2008-Apr-14 22:08:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-14 22:08:45 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 313.35 58.8 hcorcal 5 tracking no first 1 AGESVC1A_p1_070 120900.00 71630.00 J 8500.0 Heliocentric velocity(optical)' 2008-Apr-14 22:08:45 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-14 22:08:45 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-14 22:08:45 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'STOPPED' 2008-Apr-14 22:08:45 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-14 22:08:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p1_070} 2008-Apr-14 22:08:45 INFO3 fixed_driftmap: Sending telescope to Az = 313.35 and ZA = 15.78 2008-Apr-14 22:08:45 LOG3 track_source: Calling 'track_source AGESVC1A_p1_070 313.35 15.7841387542 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-14 22:08:45 START begin_task: Starting task 'sending tracking commands' 2008-Apr-14 22:08:45 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-14 22:08:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_070} INFO {Slewing to source 'AGESVC1A_p1_070' ...} 2008-Apr-14 22:08:45 INFO1 track_source: Starting to track AGESVC1A_p1_070 2008-Apr-14 22:08:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_070" 2008-Apr-14 22:08:45 LOG3 vw_send: To DATATAKING: set ra 313.35 2008-Apr-14 22:08:45 LOG3 vw_send: To DATATAKING: set dec 15.7841387542 2008-Apr-14 22:08:45 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-14 22:08:45 LOG3 vw_send: To DATATAKING: pnt tr 313.35 15.7841387542 -CF 2008-Apr-14 22:08:45 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-14 22:08:45 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-14 22:08:45 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-14 22:08:45 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-14 22:08:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-14 22:08:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-14 22:08:45 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-14 22:08:45 START begin_task: Starting task 'rotate ALFA to +58.8 degrees' 2008-Apr-14 22:08:45 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-14 22:08:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +58.8 degrees ...} 2008-Apr-14 22:08:45 INFO2 rotate_alfa: ALFA commanded to +58.8 degrees 2008-Apr-14 22:08:45 LOG3 sock_errsend: To ALFAMOTOR: POSITION 58.8 REPLY 2008-Apr-14 22:08:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-14 22:08:45 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-14 22:08:45 LOG5 begin_task: Level: (4) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-14 22:08:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_070" 2008-Apr-14 22:08:45 LOG4 got_cormsg: From DATATAKING: set ra 313.35 2008-Apr-14 22:08:45 LOG4 got_cormsg: From DATATAKING: set dec 15.7841387542 2008-Apr-14 22:08:45 LOG4 got_cormsg: From DATATAKING: vw% 313.35 2008-Apr-14 22:08:45 LOG4 got_cormsg: From DATATAKING: vw% 15.7841387542 2008-Apr-14 22:08:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:08:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-14 22:08:45 LOG4 got_cormsg: From DATATAKING: pnt tr 313.35 15.7841387542 -CF 2008-Apr-14 22:08:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-14 22:08:45 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-14 22:08:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:09:08 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-14 22:09:08 INFO3 alfa_motor: ALFA rotator in-position +58.80 degrees 2008-Apr-14 22:09:08 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-14 22:09:08 LOG5 end_task: Level: (4) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-14 22:09:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-14 22:09:08 STOP finish_task: Finishing task 'rotate ALFA to +58.8 degrees' 2008-Apr-14 22:09:08 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-14 22:09:08 INFO2 finish_task: DONE finished configuration: rotating ALFA to +58.8 degrees 2008-Apr-14 22:09:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-14 22:09:08 STOP end_task: Finishing task 'rotate ALFA to +58.8 degrees' with status 'OK' 2008-Apr-14 22:09:08 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-14 22:09:08 START begin_task: Starting task 'waiting on telescope' 2008-Apr-14 22:09:08 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-14 22:09:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-14 22:09:08 LOG3 waittrk: Start waittrk 5 2008-Apr-14 22:09:08 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-14 22:09:08 LOG5 begin_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-14 22:09:14 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-14 22:09:14 LOG5 end_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-14 22:09:14 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-14 22:09:14 LOG5 begin_task: Level: (4) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-14 22:14:24 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-14 22:14:24 LOG5 end_task: Level: (4) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-14 22:14:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-14 22:14:24 INFO2 waittrk: Now tracking AGESVC1A_p1_070 2008-Apr-14 22:14:24 LOG4 waittrk: Current telescope position: Az = 312.97 ZA = 15.78 2008-Apr-14 22:14:24 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-14 22:14:24 LOG5 finish_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-14 22:14:24 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-14 22:14:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-14 22:14:24 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-14 22:14:24 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-14 22:14:24 START begin_task: Starting task 'selecting calibration type' 2008-Apr-14 22:14:24 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-14 22:14:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-14 22:14:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-14 22:14:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-14 22:14:24 START begin_task: Starting task 'waiting on setcal' 2008-Apr-14 22:14:24 LOG5 begin_task: Level: (4) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-14 22:14:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-14 22:14:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-14 22:14:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:14:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-14 22:14:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-14 22:14:24 LOG5 end_task: Level: (4) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-14 22:14:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-14 22:14:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-14 22:14:24 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-14 22:14:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-14 22:14:24 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-14 22:14:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-14 22:14:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-14 22:14:24 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-14 22:14:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-14 22:14:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-14 22:14:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-14 22:14:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-14 22:14:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-14 22:14:24 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-14 22:14:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:14:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-14 22:14:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-14 22:14:24 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-14 22:14:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-14 22:14:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-14 22:14:24 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-14 22:14:24 LOG5 finish_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-14 22:14:24 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-14 22:14:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-14 22:14:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-14 22:14:24 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-14 22:14:24 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Apr-14 22:14:24 INFO2 astwait: Waiting for 36 seconds from 02:14:24 to 02:15:00 UTC ... 2008-Apr-14 22:14:24 LOG4 send_obs_status: To obs_status: <1> TASKTIME 36 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-14 22:14:24 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Apr-14 22:14:24 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-14 22:15:00 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Apr-14 22:15:00 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-14 22:15:00 INFO3 astwait: Finished waiting 2008-Apr-14 22:15:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-14 22:15:00 LOG5 dopset_later: Calling 'dopset_later 61.34007989836968' 2008-Apr-14 22:15:00 INFO3 dopset_later: Setting Doppler correction for 22:16:00 (61.3 seconds from now) 2008-Apr-14 22:15:00 LOG5 antvel: Calling 'antvel 313.350000 15.784139 F 61.34007989836968' 2008-Apr-14 22:15:00 LOG2 antvel: Parameters to Doppler: Heliocentric 94560 2008 105 0.0 2008-Apr-14 22:15:00 INFO5 antvel: Computed antenna velocity: +12.48594 km/s 2008-Apr-14 22:15:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=12.4859399172 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2008-Apr-14 22:15:00 INFO4 dopset_gen: New sky frequencies: 1381.185904 1381.185904 1381.185904 1381.185904 1381.185904 1381.185904 1381.185904 1381.185904 1381.185904 2008-Apr-14 22:15:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.185904 sky0=1381.185904 sky1=1381.185904 sky2=1381.185904 sky3=1381.185904 sky4=1381.185904 sky5=1381.185904 sky6=1381.185904 sky7=1381.185904 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-14 22:15:00 LOG2 dopset_gen: Result from 'sky2syn': 1631.185904 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-14 22:15:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631185904.0} 2008-Apr-14 22:15:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-14 22:15:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2008-Apr-14 22:15:00 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2008-Apr-14 22:15:00 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.3 Dec = +07:16:19.9 2008-Apr-14 22:15:00 LOG3 track_source: Calling 'track_source AGESVC1A_p1_070 120803.3 071619.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-14 22:15:00 START begin_task: Starting task 'sending tracking commands' 2008-Apr-14 22:15:00 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-14 22:15:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_070} INFO {Slewing to source 'AGESVC1A_p1_070' ...} 2008-Apr-14 22:15:00 INFO1 track_source: Starting to track AGESVC1A_p1_070 2008-Apr-14 22:15:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_070" 2008-Apr-14 22:15:00 LOG3 vw_send: To DATATAKING: set ra 120803.3 2008-Apr-14 22:15:00 LOG3 vw_send: To DATATAKING: set dec 071619.9 2008-Apr-14 22:15:00 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-14 22:15:00 LOG3 vw_send: To DATATAKING: pnt tr 120803.3 071619.9 -CJ 2008-Apr-14 22:15:00 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-14 22:15:00 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-14 22:15:00 LOG5 finish_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-14 22:15:00 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-14 22:15:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-14 22:15:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-14 22:15:00 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-14 22:15:00 START begin_task: Starting task 'waiting on telescope' 2008-Apr-14 22:15:00 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-14 22:15:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-14 22:15:00 LOG3 waittrk: Start waittrk 5 2008-Apr-14 22:15:00 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-14 22:15:00 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631185904.0} 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_070" 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: set ra 120803.3 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: 120803.3 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: set dec 071619.9 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.3 071619.9 -CJ 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: 071619.9 2008-Apr-14 22:15:00 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Apr-14 22:15:05 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-14 22:15:05 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-14 22:15:05 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-14 22:15:05 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-14 22:15:07 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-14 22:15:07 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-14 22:15:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-14 22:15:07 INFO2 waittrk: Now tracking AGESVC1A_p1_070 2008-Apr-14 22:15:07 LOG4 waittrk: Current telescope position: Az = 313.02 ZA = 15.77 2008-Apr-14 22:15:07 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-14 22:15:07 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-14 22:15:07 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-14 22:15:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-14 22:15:07 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-14 22:15:07 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-14 22:15:07 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-14 22:15:07 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-14 22:15:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-14 22:15:07 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-14 22:15:07 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-14 22:15:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-14 22:15:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-14 22:15:07 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-14 22:15:07 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-14 22:15:07 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-14 22:15:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-14 22:15:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:15:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-14 22:15:10 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-14 22:15:10 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-14 22:15:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-14 22:15:10 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-14 22:15:10 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-14 22:15:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-14 22:15:10 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-14 22:15:10 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-14 22:15:11 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-14 22:15:11 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-14 22:15:11 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-14 22:15:11 LOG5 begin_task: Level: (5) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-14 22:15:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-14 22:15:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:15:11 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 8 7 dB 2008-Apr-14 22:15:11 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-14 22:15:11 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 4 dB 2008-Apr-14 22:15:11 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-14 22:15:11 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-14 22:15:11 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-14 22:15:11 LOG5 end_task: Level: (5) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-14 22:15:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.938 0.515 ALFA beam 1: 0.912 0.903 2008-Apr-14 22:15:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.126 1.018 ALFA beam 3: 1.075 0.889 2008-Apr-14 22:15:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.996 1.024 ALFA beam 5: 1.087 0.969 2008-Apr-14 22:15:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.019 1.043 ALFA beam 7: 0.901 0.929 2008-Apr-14 22:15:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-14 22:15:11 LOG5 finish_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-14 22:15:11 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-14 22:15:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-14 22:15:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-14 22:15:11 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-14 22:15:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-14 22:15:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-14 22:15:11 LOG5 finish_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-14 22:15:11 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-14 22:15:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-14 22:15:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-14 22:15:11 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-14 22:15:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Karen ONeil 2008-Apr-14 22:15:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Karen ONeil 2008-Apr-14 22:15:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Karen ONeil 2008-Apr-14 22:15:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Karen ONeil 2008-Apr-14 22:15:11 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080414.a2048.0002.fits' is empty! 2008-Apr-14 22:15:11 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2008-Apr-14 22:15:11 START begin_task: Starting task 'WAPP calibration' 2008-Apr-14 22:15:11 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-14 22:15:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-14 22:15:11 INFO2 take_cal: Starting take_cal hcorcal 5 0 2008-Apr-14 22:15:11 START begin_task: Starting task 'selecting calibration type' 2008-Apr-14 22:15:11 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-14 22:15:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-14 22:15:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-14 22:15:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-14 22:15:11 START begin_task: Starting task 'waiting on setcal' 2008-Apr-14 22:15:11 LOG5 begin_task: Level: (5) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-14 22:15:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Karen ONeil' 2008-Apr-14 22:15:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-14 22:15:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-14 22:15:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:15:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-14 22:15:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-14 22:15:12 LOG5 end_task: Level: (5) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-14 22:15:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-14 22:15:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-14 22:15:12 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-14 22:15:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-14 22:15:12 LOG5 begin_task: Level: (5) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-14 22:15:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:15:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-14 22:15:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-14 22:15:12 LOG5 end_task: Level: (5) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-14 22:15:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-14 22:15:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-14 22:15:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-14 22:15:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-14 22:15:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-14 22:15:12 LOG5 begin_task: Level: (5) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-14 22:15:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-14 22:15:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-14 22:15:12 LOG5 end_task: Level: (5) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-14 22:15:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-14 22:15:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-14 22:15:12 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-14 22:15:12 LOG5 finish_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-14 22:15:12 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-14 22:15:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-14 22:15:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-14 22:15:12 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-14 22:15:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-14 22:15:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-14 22:15:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-14 22:15:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-14 22:15:12 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-14 22:15:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-14 22:15:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-14 22:15:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-14 22:15:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-14 22:15:12 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-14 22:15:12 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-14 22:15:12 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL ON' 2008-Apr-14 22:15:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-14 22:15:12 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-14 22:15:12 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-14 22:15:12 LOG5 log_alfabeam: Parameters: 12.13425 7.2721944444444429 11.377361 2008.2900129287398 58.799965 2008-Apr-14 22:15:12 LOG4 log_alfabeam: ALFABEAM 0 12.134250000000002 7.272194444444443 2008-Apr-14 22:15:12 LOG4 log_alfabeam: ALFABEAM 1 12.132001392962867 7.369898387135974 2008-Apr-14 22:15:12 LOG4 log_alfabeam: ALFABEAM 2 12.127711120226090 7.305189778002057 2008-Apr-14 22:15:12 LOG4 log_alfabeam: ALFABEAM 3 12.129922883112751 7.207298729400417 2008-Apr-14 22:15:12 LOG4 log_alfabeam: ALFABEAM 4 12.136467407628338 7.174220707176414 2008-Apr-14 22:15:12 LOG4 log_alfabeam: ALFABEAM 5 12.140807299931943 7.239648961332155 2008-Apr-14 22:15:12 LOG4 log_alfabeam: ALFABEAM 6 12.138553034451425 7.337435183129950 2008-Apr-14 22:15:12 INFO2 take_spectra: Starting WAPP scan: 810500007 2008-Apr-14 22:15:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-14 22:15:13 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-14 22:15:13 LOG5 begin_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-14 22:15:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-14 22:15:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.515 < 0.8)! 2008-Apr-14 22:15:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 0.515 0.912 0.903 2008-Apr-14 22:15:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.126 1.018 1.075 0.889 2008-Apr-14 22:15:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.996 1.024 1.087 0.969 2008-Apr-14 22:15:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 1.043 0.901 0.929 2008-Apr-14 22:15:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8114.00 2008-Apr-14 22:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.185904 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-14 22:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-14 22:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-14 22:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-14 22:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.126 (still bad) 2008-Apr-14 22:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-14 22:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-14 22:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-14 22:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-14 22:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-14 22:15:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-14 22:15:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-14 22:15:19 LOG5 end_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-14 22:15:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-14 22:15:19 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-14 22:15:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-14 22:15:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-14 22:15:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-14 22:15:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-14 22:15:19 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-14 22:15:20 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-14 22:15:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-14 22:15:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-14 22:15:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-14 22:15:20 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-14 22:15:20 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2008-Apr-14 22:15:20 LOG4 take_spectra: Calling 'take_spectra 5 5 CAL OFF' 2008-Apr-14 22:15:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-14 22:15:20 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-14 22:15:20 INFO3 take_spectra: Starting take_spectra 5 5 2008-Apr-14 22:15:20 LOG5 log_alfabeam: Parameters: 12.13425 7.2721944444444429 11.379311 2008.2900131505564 58.799965 2008-Apr-14 22:15:20 LOG4 log_alfabeam: ALFABEAM 0 12.134249999999996 7.272194444444440 2008-Apr-14 22:15:20 LOG4 log_alfabeam: ALFABEAM 1 12.132009446530354 7.369939254634918 2008-Apr-14 22:15:20 LOG4 log_alfabeam: ALFABEAM 2 12.127713863099745 7.305309650089851 2008-Apr-14 22:15:20 LOG4 log_alfabeam: ALFABEAM 3 12.129917509278926 7.207378150954178 2008-Apr-14 22:15:20 LOG4 log_alfabeam: ALFABEAM 4 12.136459294385777 7.174180051148515 2008-Apr-14 22:15:20 LOG4 log_alfabeam: ALFABEAM 5 12.140804618999120 7.239529385846740 2008-Apr-14 22:15:20 LOG4 log_alfabeam: ALFABEAM 6 12.138558403524090 7.337356679335879 2008-Apr-14 22:15:20 INFO2 take_spectra: Starting WAPP scan: 810500008 2008-Apr-14 22:15:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2008-Apr-14 22:15:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-14 22:15:20 LOG5 begin_task: Level: (5) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-14 22:15:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-14 22:15:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8121.00 2008-Apr-14 22:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 1.506 (still bad) 2008-Apr-14 22:15:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.185904 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-14 22:15:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-14 22:15:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-14 22:15:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-14 22:15:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-14 22:15:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-14 22:15:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-14 22:15:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-14 22:15:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-14 22:15:26 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2008-Apr-14 22:15:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-14 22:15:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-14 22:15:26 LOG5 end_task: Level: (5) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-14 22:15:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-14 22:15:26 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-14 22:15:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-14 22:15:26 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-14 22:15:26 LOG5 finish_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-14 22:15:26 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-14 22:15:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-14 22:15:26 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-14 22:15:26 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-14 22:15:27 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2008-Apr-14 22:15:27 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 313.35 and ZA = 15.78 2008-Apr-14 22:15:27 LOG3 track_source: Calling 'track_source AGESVC1A_p1_070 313.35 15.7841387542 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2008-Apr-14 22:15:27 START begin_task: Starting task 'sending tracking commands' 2008-Apr-14 22:15:27 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-14 22:15:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_070} INFO {Slewing to source 'AGESVC1A_p1_070' ...} 2008-Apr-14 22:15:27 INFO1 track_source: Starting to track AGESVC1A_p1_070 2008-Apr-14 22:15:27 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_070" 2008-Apr-14 22:15:27 LOG3 vw_send: To DATATAKING: set ra 313.35 2008-Apr-14 22:15:27 LOG3 vw_send: To DATATAKING: set dec 15.7841387542 2008-Apr-14 22:15:27 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-14 22:15:27 LOG3 vw_send: To DATATAKING: pnt tr 313.35 15.7841387542 -CF 2008-Apr-14 22:15:27 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2008-Apr-14 22:15:27 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-14 22:15:27 LOG5 finish_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-14 22:15:27 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-14 22:15:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-14 22:15:27 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-14 22:15:27 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-14 22:15:27 LOG1 fixed_driftmap: Parameters: HA = -00:46:00.2 Start = 11:23:27.0 LST = 11:22:52.5 diff = 34.4 secs 2008-Apr-14 22:15:27 INFO2 fixed_driftmap: Waiting 32.4 seconds for RA 12:09:27 2008-Apr-14 22:15:27 INFO2 lstwait: Waiting for 32.3 secs from LST 11:22:53 to LST 11:23:25 ... 2008-Apr-14 22:15:27 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.34386791660738 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-14 22:15:27 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-14 22:15:27 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-14 22:15:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_070" 2008-Apr-14 22:15:27 LOG4 got_cormsg: From DATATAKING: set ra 313.35 2008-Apr-14 22:15:27 LOG4 got_cormsg: From DATATAKING: set dec 15.7841387542 2008-Apr-14 22:15:27 LOG4 got_cormsg: From DATATAKING: vw% 313.35 2008-Apr-14 22:15:27 LOG4 got_cormsg: From DATATAKING: vw% 15.7841387542 2008-Apr-14 22:15:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:15:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-14 22:15:27 LOG4 got_cormsg: From DATATAKING: pnt tr 313.35 15.7841387542 -CF 2008-Apr-14 22:15:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2008-Apr-14 22:15:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-14 22:15:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-14 22:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:15:59 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-14 22:15:59 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-14 22:15:59 LOG4 lstwait: Finished waiting, the gui caused difference: 0.6551786000002835 2008-Apr-14 22:15:59 INFO3 lstwait: Finished waiting 2008-Apr-14 22:15:59 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-14 22:15:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2008-Apr-14 22:15:59 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-14 22:15:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2008-Apr-14 22:15:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-14 22:15:59 LOG4 take_spectra: Calling 'take_spectra 1200 1 FIXEDAZ FIXEDAZ' 2008-Apr-14 22:15:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-14 22:15:59 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-14 22:15:59 INFO3 take_spectra: Starting take_spectra 1200 1 2008-Apr-14 22:15:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-14 22:15:59 INFO2 take_spectra: Starting WAPP scan: 810500009 2008-Apr-14 22:16:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2008-Apr-14 22:16:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-14 22:16:00 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-14 22:16:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-14 22:16:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8161.00 2008-Apr-14 22:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.185904 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-14 22:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-14 22:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-14 22:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-14 22:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-14 22:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-14 22:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-14 22:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-14 22:16:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.185904 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-14 22:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.128 (still bad) 2008-Apr-14 22:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.123 (still bad) 2008-Apr-14 22:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:16:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.528 < 0.8)! 2008-Apr-14 22:16:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.528 0.918 0.904 2008-Apr-14 22:16:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.124 1.020 1.081 0.891 2008-Apr-14 22:16:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.052 1.084 0.970 2008-Apr-14 22:16:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 1.072 0.913 0.953 2008-Apr-14 22:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.122 (still bad) 2008-Apr-14 22:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.122 (still bad) 2008-Apr-14 22:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.127 (still bad) 2008-Apr-14 22:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.125 (still bad) 2008-Apr-14 22:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.126 (still bad) 2008-Apr-14 22:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.123 (still bad) 2008-Apr-14 22:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.123 (still bad) 2008-Apr-14 22:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.129 (still bad) 2008-Apr-14 22:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.126 (still bad) 2008-Apr-14 22:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.123 (still bad) 2008-Apr-14 22:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.128 (still bad) 2008-Apr-14 22:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.123 (still bad) 2008-Apr-14 22:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.124 (still bad) 2008-Apr-14 22:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.122 (still bad) 2008-Apr-14 22:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.125 (still bad) 2008-Apr-14 22:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.119 (still bad) 2008-Apr-14 22:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.122 (still bad) 2008-Apr-14 22:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.124 (still bad) 2008-Apr-14 22:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.129 (still bad) 2008-Apr-14 22:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:17:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.527 < 0.8)! 2008-Apr-14 22:17:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 0.527 0.919 0.904 2008-Apr-14 22:17:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.124 1.020 1.081 0.890 2008-Apr-14 22:17:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 1.050 1.085 0.970 2008-Apr-14 22:17:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.076 0.913 0.957 2008-Apr-14 22:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.129 (still bad) 2008-Apr-14 22:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.123 (still bad) 2008-Apr-14 22:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.131 (still bad) 2008-Apr-14 22:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.124 (still bad) 2008-Apr-14 22:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.123 (still bad) 2008-Apr-14 22:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.120 (still bad) 2008-Apr-14 22:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.121 (still bad) 2008-Apr-14 22:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.125 (still bad) 2008-Apr-14 22:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.125 (still bad) 2008-Apr-14 22:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.123 (still bad) 2008-Apr-14 22:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.125 (still bad) 2008-Apr-14 22:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.122 (still bad) 2008-Apr-14 22:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.125 (still bad) 2008-Apr-14 22:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.126 (still bad) 2008-Apr-14 22:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.125 (still bad) 2008-Apr-14 22:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.123 (still bad) 2008-Apr-14 22:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:18:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.526 < 0.8)! 2008-Apr-14 22:18:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.526 0.916 0.899 2008-Apr-14 22:18:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.121 1.016 1.079 0.889 2008-Apr-14 22:18:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 1.051 1.083 0.968 2008-Apr-14 22:18:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.073 0.910 0.952 2008-Apr-14 22:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.123 (still bad) 2008-Apr-14 22:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.123 (still bad) 2008-Apr-14 22:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.123 (still bad) 2008-Apr-14 22:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.118 (still bad) 2008-Apr-14 22:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.122 (still bad) 2008-Apr-14 22:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.123 (still bad) 2008-Apr-14 22:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.116 (still bad) 2008-Apr-14 22:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.120 (still bad) 2008-Apr-14 22:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.119 (still bad) 2008-Apr-14 22:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.122 (still bad) 2008-Apr-14 22:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.121 (still bad) 2008-Apr-14 22:19:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.527 < 0.8)! 2008-Apr-14 22:19:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 0.527 0.915 0.899 2008-Apr-14 22:19:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 1.015 1.088 0.894 2008-Apr-14 22:19:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.047 1.080 0.967 2008-Apr-14 22:19:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.073 0.911 0.952 2008-Apr-14 22:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.126 (still bad) 2008-Apr-14 22:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.128 (still bad) 2008-Apr-14 22:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.117 (still bad) 2008-Apr-14 22:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.120 (still bad) 2008-Apr-14 22:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.130 (still bad) 2008-Apr-14 22:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.121 (still bad) 2008-Apr-14 22:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.120 (still bad) 2008-Apr-14 22:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.122 (still bad) 2008-Apr-14 22:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.126 (still bad) 2008-Apr-14 22:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.122 (still bad) 2008-Apr-14 22:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.122 (still bad) 2008-Apr-14 22:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.122 (still bad) 2008-Apr-14 22:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.129 (still bad) 2008-Apr-14 22:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.121 (still bad) 2008-Apr-14 22:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.122 (still bad) 2008-Apr-14 22:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.122 (still bad) 2008-Apr-14 22:20:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.526 < 0.8)! 2008-Apr-14 22:20:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.526 0.917 0.899 2008-Apr-14 22:20:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.122 1.016 1.080 0.888 2008-Apr-14 22:20:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.048 1.079 0.967 2008-Apr-14 22:20:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.073 0.912 0.951 2008-Apr-14 22:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.129 (still bad) 2008-Apr-14 22:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.118 (still bad) 2008-Apr-14 22:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.122 (still bad) 2008-Apr-14 22:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.120 (still bad) 2008-Apr-14 22:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.119 (still bad) 2008-Apr-14 22:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.130 (still bad) 2008-Apr-14 22:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.119 (still bad) 2008-Apr-14 22:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.119 (still bad) 2008-Apr-14 22:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.128 (still bad) 2008-Apr-14 22:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.121 (still bad) 2008-Apr-14 22:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.119 (still bad) 2008-Apr-14 22:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.128 (still bad) 2008-Apr-14 22:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.123 (still bad) 2008-Apr-14 22:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:21:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.526 < 0.8)! 2008-Apr-14 22:21:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 0.526 0.917 0.902 2008-Apr-14 22:21:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.122 1.015 1.081 0.888 2008-Apr-14 22:21:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.056 1.085 0.968 2008-Apr-14 22:21:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.073 0.913 0.954 2008-Apr-14 22:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.120 (still bad) 2008-Apr-14 22:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.120 (still bad) 2008-Apr-14 22:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.125 (still bad) 2008-Apr-14 22:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.140 (still bad) 2008-Apr-14 22:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.142 (still bad) 2008-Apr-14 22:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.136 (still bad) 2008-Apr-14 22:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.124 (still bad) 2008-Apr-14 22:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.120 (still bad) 2008-Apr-14 22:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.123 (still bad) 2008-Apr-14 22:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.138 (still bad) 2008-Apr-14 22:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.149 (still bad) 2008-Apr-14 22:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.156 (still bad) 2008-Apr-14 22:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.149 (still bad) 2008-Apr-14 22:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.139 (still bad) 2008-Apr-14 22:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.122 (still bad) 2008-Apr-14 22:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.122 (still bad) 2008-Apr-14 22:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.123 (still bad) 2008-Apr-14 22:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.123 (still bad) 2008-Apr-14 22:22:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.526 < 0.8)! 2008-Apr-14 22:22:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.526 0.917 0.900 2008-Apr-14 22:22:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 1.015 1.091 0.896 2008-Apr-14 22:22:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 1.047 1.080 0.964 2008-Apr-14 22:22:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.071 0.911 0.951 2008-Apr-14 22:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.122 (still bad) 2008-Apr-14 22:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.122 (still bad) 2008-Apr-14 22:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.120 (still bad) 2008-Apr-14 22:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.122 (still bad) 2008-Apr-14 22:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.127 (still bad) 2008-Apr-14 22:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.121 (still bad) 2008-Apr-14 22:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.127 (still bad) 2008-Apr-14 22:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.119 (still bad) 2008-Apr-14 22:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.118 (still bad) 2008-Apr-14 22:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.122 (still bad) 2008-Apr-14 22:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.117 (still bad) 2008-Apr-14 22:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.121 (still bad) 2008-Apr-14 22:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.118 (still bad) 2008-Apr-14 22:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.119 (still bad) 2008-Apr-14 22:23:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.525 < 0.8)! 2008-Apr-14 22:23:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 0.525 0.915 0.899 2008-Apr-14 22:23:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.119 1.014 1.079 0.887 2008-Apr-14 22:23:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.052 1.078 0.965 2008-Apr-14 22:23:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.069 0.909 0.949 2008-Apr-14 22:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.119 (still bad) 2008-Apr-14 22:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.119 (still bad) 2008-Apr-14 22:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.117 (still bad) 2008-Apr-14 22:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.118 (still bad) 2008-Apr-14 22:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.120 (still bad) 2008-Apr-14 22:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.117 (still bad) 2008-Apr-14 22:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.117 (still bad) 2008-Apr-14 22:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.121 (still bad) 2008-Apr-14 22:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.119 (still bad) 2008-Apr-14 22:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:24:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.527 < 0.8)! 2008-Apr-14 22:24:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.527 0.915 0.899 2008-Apr-14 22:24:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.121 1.016 1.083 0.889 2008-Apr-14 22:24:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 1.047 1.081 0.966 2008-Apr-14 22:24:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.069 0.909 0.948 2008-Apr-14 22:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.118 (still bad) 2008-Apr-14 22:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.127 (still bad) 2008-Apr-14 22:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.128 (still bad) 2008-Apr-14 22:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.117 (still bad) 2008-Apr-14 22:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.121 (still bad) 2008-Apr-14 22:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.116 (still bad) 2008-Apr-14 22:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.126 (still bad) 2008-Apr-14 22:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.119 (still bad) 2008-Apr-14 22:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.116 (still bad) 2008-Apr-14 22:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.118 (still bad) 2008-Apr-14 22:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.115 (still bad) 2008-Apr-14 22:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.124 (still bad) 2008-Apr-14 22:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.116 (still bad) 2008-Apr-14 22:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.120 (still bad) 2008-Apr-14 22:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.124 (still bad) 2008-Apr-14 22:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:25:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.528 < 0.8)! 2008-Apr-14 22:25:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.528 0.915 0.897 2008-Apr-14 22:25:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.119 1.013 1.079 0.886 2008-Apr-14 22:25:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.047 1.081 0.966 2008-Apr-14 22:25:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.071 0.912 0.950 2008-Apr-14 22:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.125 (still bad) 2008-Apr-14 22:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.116 (still bad) 2008-Apr-14 22:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.125 (still bad) 2008-Apr-14 22:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.121 (still bad) 2008-Apr-14 22:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.116 (still bad) 2008-Apr-14 22:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.116 (still bad) 2008-Apr-14 22:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.122 (still bad) 2008-Apr-14 22:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.126 (still bad) 2008-Apr-14 22:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.119 (still bad) 2008-Apr-14 22:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.117 (still bad) 2008-Apr-14 22:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:26:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.526 < 0.8)! 2008-Apr-14 22:26:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 0.526 0.913 0.899 2008-Apr-14 22:26:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 1.013 1.077 0.884 2008-Apr-14 22:26:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 1.046 1.078 0.965 2008-Apr-14 22:26:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 1.070 0.909 0.949 2008-Apr-14 22:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.124 (still bad) 2008-Apr-14 22:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.115 (still bad) 2008-Apr-14 22:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.126 (still bad) 2008-Apr-14 22:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.116 (still bad) 2008-Apr-14 22:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.124 (still bad) 2008-Apr-14 22:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.116 (still bad) 2008-Apr-14 22:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.126 (still bad) 2008-Apr-14 22:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.115 (still bad) 2008-Apr-14 22:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.117 (still bad) 2008-Apr-14 22:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.124 (still bad) 2008-Apr-14 22:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.115 (still bad) 2008-Apr-14 22:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.113 (still bad) 2008-Apr-14 22:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:27:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.528 < 0.8)! 2008-Apr-14 22:27:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.528 0.914 0.899 2008-Apr-14 22:27:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.115 1.012 1.076 0.885 2008-Apr-14 22:27:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.007 1.046 1.078 0.964 2008-Apr-14 22:27:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.070 0.913 0.951 2008-Apr-14 22:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.122 (still bad) 2008-Apr-14 22:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.115 (still bad) 2008-Apr-14 22:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.115 (still bad) 2008-Apr-14 22:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.116 (still bad) 2008-Apr-14 22:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.118 (still bad) 2008-Apr-14 22:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.118 (still bad) 2008-Apr-14 22:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.117 (still bad) 2008-Apr-14 22:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.116 (still bad) 2008-Apr-14 22:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.119 (still bad) 2008-Apr-14 22:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.115 (still bad) 2008-Apr-14 22:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.120 (still bad) 2008-Apr-14 22:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.116 (still bad) 2008-Apr-14 22:28:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.529 < 0.8)! 2008-Apr-14 22:28:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 0.529 0.917 0.901 2008-Apr-14 22:28:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.119 1.014 1.078 0.886 2008-Apr-14 22:28:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 1.048 1.079 0.967 2008-Apr-14 22:28:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.071 0.912 0.950 2008-Apr-14 22:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.117 (still bad) 2008-Apr-14 22:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.118 (still bad) 2008-Apr-14 22:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.122 (still bad) 2008-Apr-14 22:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.120 (still bad) 2008-Apr-14 22:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.122 (still bad) 2008-Apr-14 22:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.123 (still bad) 2008-Apr-14 22:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.121 (still bad) 2008-Apr-14 22:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.120 (still bad) 2008-Apr-14 22:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.121 (still bad) 2008-Apr-14 22:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.121 (still bad) 2008-Apr-14 22:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.126 (still bad) 2008-Apr-14 22:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.118 (still bad) 2008-Apr-14 22:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.128 (still bad) 2008-Apr-14 22:29:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.527 < 0.8)! 2008-Apr-14 22:29:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.527 0.914 0.897 2008-Apr-14 22:29:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.121 1.013 1.077 0.884 2008-Apr-14 22:29:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.047 1.081 0.967 2008-Apr-14 22:29:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.072 0.912 0.950 2008-Apr-14 22:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.116 (still bad) 2008-Apr-14 22:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.120 (still bad) 2008-Apr-14 22:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2008-Apr-14 22:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.128 (still bad) 2008-Apr-14 22:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.117 (still bad) 2008-Apr-14 22:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.116 (still bad) 2008-Apr-14 22:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.118 (still bad) 2008-Apr-14 22:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.120 (still bad) 2008-Apr-14 22:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.117 (still bad) 2008-Apr-14 22:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.125 (still bad) 2008-Apr-14 22:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.117 (still bad) 2008-Apr-14 22:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.121 (still bad) 2008-Apr-14 22:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.126 (still bad) 2008-Apr-14 22:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.122 (still bad) 2008-Apr-14 22:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.121 (still bad) 2008-Apr-14 22:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.120 (still bad) 2008-Apr-14 22:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.129 (still bad) 2008-Apr-14 22:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.127 (still bad) 2008-Apr-14 22:30:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.528 < 0.8)! 2008-Apr-14 22:30:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.528 0.915 0.900 2008-Apr-14 22:30:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.122 1.016 1.079 0.884 2008-Apr-14 22:30:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.049 1.080 0.967 2008-Apr-14 22:30:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.070 0.912 0.949 2008-Apr-14 22:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2008-Apr-14 22:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.123 (still bad) 2008-Apr-14 22:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2008-Apr-14 22:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.126 (still bad) 2008-Apr-14 22:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.117 (still bad) 2008-Apr-14 22:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2008-Apr-14 22:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.121 (still bad) 2008-Apr-14 22:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.120 (still bad) 2008-Apr-14 22:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.126 (still bad) 2008-Apr-14 22:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.117 (still bad) 2008-Apr-14 22:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.116 (still bad) 2008-Apr-14 22:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.118 (still bad) 2008-Apr-14 22:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.122 (still bad) 2008-Apr-14 22:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.119 (still bad) 2008-Apr-14 22:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.119 (still bad) 2008-Apr-14 22:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2008-Apr-14 22:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.120 (still bad) 2008-Apr-14 22:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2008-Apr-14 22:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.116 (still bad) 2008-Apr-14 22:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.119 (still bad) 2008-Apr-14 22:31:31 INFO5 check_wapp_levels: WAPP pow