2008-Sep-22 22:04:09 BEGIN executive: CIMA executive starting ... 2008-Sep-22 22:04:09 NOTE executive: STARTING NEW CIMA SESSION 2008-Sep-22 22:04:09 INFO1 executive: Using CIMA version 3.0.02 'next' from 2008-09-12 12:25 2008-Sep-22 22:04:09 INFO4 executive: This is an ON-LINE session 2008-Sep-22 22:04:09 INFO4 executive: This is a REMOTE session 2008-Sep-22 22:04:09 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Sep-22 22:04:09 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Ann Martin' 2008-Sep-22 22:04:09 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20080922' 2008-Sep-22 22:04:10 LOG2 log_preferences: Currently applied preferences: 2008-Sep-22 22:04:10 LOG2 log_preferences: prefs(dailylog) = daily 2008-Sep-22 22:04:10 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Sep-22 22:04:10 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Sep-22 22:04:10 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Sep-22 22:04:10 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Sep-22 22:04:10 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Sep-22 22:04:10 LOG2 log_preferences: prefs(logcolours) = full 2008-Sep-22 22:04:10 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Sep-22 22:04:10 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Sep-22 22:04:10 LOG2 log_preferences: prefs(displayformat) = long 2008-Sep-22 22:04:10 LOG2 log_preferences: prefs(logformat) = new 2008-Sep-22 22:04:10 LOG2 log_preferences: prefs(fontsize) = 3 2008-Sep-22 22:04:10 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Sep-22 22:04:10 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Sep-22 22:04:10 ALERT executive: CIMA executive ready 2008-Sep-22 22:04:12 NOTE frontend: CIMA frontend ready 2008-Sep-22 22:04:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:13 LOG4 got_cormsg: From DATATAKING: setup 2008-Sep-22 22:04:17 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Sep-22 22:04:17 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Sep-22 22:04:17 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Sep-22 22:04:17 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Sep-22 22:04:17 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Sep-22 22:04:17 NOTE select_receiver: Starting to select receiver ALFA 2008-Sep-22 22:04:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Sep-22 22:04:17 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Sep-22 22:04:17 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Sep-22 22:04:17 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Sep-22 22:04:17 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Sep-22 22:04:17 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Sep-22 22:04:17 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Sep-22 22:04:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:04:17 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Sep-22 22:04:17 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Sep-22 22:04:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Sep-22 22:04:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:22 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Sep-22 22:04:23 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Sep-22 22:04:23 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Sep-22 22:04:23 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Sep-22 22:04:23 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Sep-22 22:04:23 NOTE restart_wapp: Restarting all WAPPs 2008-Sep-22 22:04:23 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Sep-22 22:04:23 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Sep-22 22:04:23 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Sep-22 22:04:23 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Sep-22 22:04:26 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Sep-22 22:04:26 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Sep-22 22:04:26 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Sep-22 22:04:26 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Sep-22 22:04:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:34 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Sep-22 22:04:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Sep-22 22:04:37 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Sep-22 22:04:37 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Sep-22 22:04:37 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Sep-22 22:04:37 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Sep-22 22:04:37 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Sep-22 22:04:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Sep-22 22:04:37 INFO1 config_iflo: Selecting receiver ALFA 2008-Sep-22 22:04:37 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Sep-22 22:04:37 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Sep-22 22:04:37 START begin_task: Starting task 'selecting receiver ALFA' 2008-Sep-22 22:04:37 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Sep-22 22:04:37 NOTE select_receiver: Starting to select receiver ALFA 2008-Sep-22 22:04:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Sep-22 22:04:37 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Sep-22 22:04:37 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Sep-22 22:04:37 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Sep-22 22:04:37 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Sep-22 22:04:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:04:37 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Sep-22 22:04:37 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Sep-22 22:04:37 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Sep-22 22:04:37 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Sep-22 22:04:37 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Sep-22 22:04:37 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Sep-22 22:04:37 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Sep-22 22:04:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Sep-22 22:04:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:04:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:04:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:04:37 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Sep-22 22:04:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:04:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:04:37 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Sep-22 22:04:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:04:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Sep-22 22:04:37 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Sep-22 22:04:37 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Sep-22 22:04:37 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Sep-22 22:04:37 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Sep-22 22:04:37 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Sep-22 22:04:37 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Sep-22 22:04:37 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Sep-22 22:04:37 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Sep-22 22:04:38 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Sep-22 22:04:38 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Sep-22 22:04:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:04:38 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Sep-22 22:04:38 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Sep-22 22:04:38 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Sep-22 22:04:38 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Sep-22 22:04:38 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Sep-22 22:04:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Sep-22 22:04:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:04:38 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Sep-22 22:04:38 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Sep-22 22:04:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:04:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:53 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:04:53 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Sep-22 22:04:53 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Sep-22 22:04:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Sep-22 22:04:53 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Sep-22 22:04:53 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Sep-22 22:04:53 DONE finish_task: DONE finished configuration: IF/LO path 2008-Sep-22 22:04:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:04:53 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Sep-22 22:04:53 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Sep-22 22:04:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Sep-22 22:04:54 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Sep-22 22:04:54 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Sep-22 22:04:54 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Sep-22 22:04:54 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Sep-22 22:04:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Sep-22 22:04:54 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Sep-22 22:04:54 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Sep-22 22:04:54 START begin_task: Starting task 'selecting calibration port' 2008-Sep-22 22:04:54 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Sep-22 22:04:54 LOG3 vw_send: To DATATAKING: calport 3 2008-Sep-22 22:04:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Sep-22 22:04:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:04:54 START begin_task: Starting task 'waiting on calport' 2008-Sep-22 22:04:54 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Sep-22 22:04:54 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Sep-22 22:04:54 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Sep-22 22:04:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:04:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:04:54 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Sep-22 22:04:54 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Sep-22 22:04:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Sep-22 22:04:54 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Sep-22 22:04:54 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Sep-22 22:04:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 22:04:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 22:04:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:04:54 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Sep-22 22:04:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:04:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:04:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 22:04:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:04:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:04:54 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Sep-22 22:04:54 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Sep-22 22:04:54 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Sep-22 22:04:54 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Sep-22 22:04:54 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Sep-22 22:04:55 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Sep-22 22:04:55 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Sep-22 22:04:55 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Sep-22 22:04:55 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Sep-22 22:04:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 22:04:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 22:04:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 22:04:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 22:04:55 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Sep-22 22:04:55 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Sep-22 22:04:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:04:55 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Sep-22 22:04:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:04:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 22:04:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:04:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:04:55 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Sep-22 22:04:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 22:04:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 22:04:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 22:04:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 22:04:55 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Sep-22 22:04:55 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Sep-22 22:04:55 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Sep-22 22:04:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:04:55 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Sep-22 22:04:55 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Sep-22 22:04:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 22:04:55 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Sep-22 22:04:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Sep-22 22:04:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Sep-22 22:04:55 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Sep-22 22:04:55 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Sep-22 22:04:55 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Sep-22 22:04:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Sep-22 22:04:55 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Sep-22 22:04:55 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Sep-22 22:04:55 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Sep-22 22:04:55 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Sep-22 22:04:55 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Sep-22 22:04:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:04:55 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Sep-22 22:04:55 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Sep-22 22:04:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 22:04:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20080922.a2010.0022.fits 2008-Sep-22 22:04:56 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080922.a2010.0022.fits} 2008-Sep-22 22:04:56 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Sep-22 22:05:03 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Sep-22 22:05:03 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Sep-22 22:05:12 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Sep-22 22:05:12 LOG4 exec_msg: From OBSERVER: track_new_source drift43p2 215200.0 +102748 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Sep-22 22:05:12 LOG1 track_new_source: Calling 'track_new_source drift43p2 215200.0 +102748 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Sep-22 22:05:12 BEGIN begin_task: Starting task 'selecting new source' 2008-Sep-22 22:05:12 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Sep-22 22:05:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift43p2} INFO {Selecting source 'drift43p2' ...} 2008-Sep-22 22:05:12 LOG3 track_source: Calling 'track_source drift43p2 215200.0 +102748 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Sep-22 22:05:12 START begin_task: Starting task 'sending tracking commands' 2008-Sep-22 22:05:12 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Sep-22 22:05:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift43p2} INFO {Slewing to source 'drift43p2' ...} 2008-Sep-22 22:05:12 INFO1 track_source: Starting to track drift43p2 2008-Sep-22 22:05:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift43p2" 2008-Sep-22 22:05:12 LOG3 vw_send: To DATATAKING: set ra 215200.0 2008-Sep-22 22:05:12 LOG3 vw_send: To DATATAKING: set dec +102748 2008-Sep-22 22:05:12 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Sep-22 22:05:12 LOG3 vw_send: To DATATAKING: pnt tr 215200.0 +102748 -CJ 2008-Sep-22 22:05:12 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Sep-22 22:05:12 STOP finish_task: Finishing task 'sending tracking commands' 2008-Sep-22 22:05:12 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Sep-22 22:05:12 INFO2 finish_task: DONE finished sending: tracking commands 2008-Sep-22 22:05:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:05:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Sep-22 22:05:12 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Sep-22 22:05:12 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Sep-22 22:05:12 START begin_task: Starting task 'applying pointing corrections' 2008-Sep-22 22:05:12 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Sep-22 22:05:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Sep-22 22:05:12 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Sep-22 22:05:12 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Sep-22 22:05:12 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Sep-22 22:05:12 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Sep-22 22:05:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:05:13 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Sep-22 22:05:13 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Sep-22 22:05:13 STOP finish_task: Finishing task 'selecting new source' 2008-Sep-22 22:05:13 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Sep-22 22:05:13 DONE finish_task: DONE finished selecting: new source 2008-Sep-22 22:05:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:05:13 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Sep-22 22:05:13 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Sep-22 22:05:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift43p2" 2008-Sep-22 22:05:13 LOG4 got_cormsg: From DATATAKING: set ra 215200.0 2008-Sep-22 22:05:13 LOG4 got_cormsg: From DATATAKING: set dec +102748 2008-Sep-22 22:05:13 LOG4 got_cormsg: From DATATAKING: vw% 215200.0 2008-Sep-22 22:05:13 LOG4 got_cormsg: From DATATAKING: vw% +102748 2008-Sep-22 22:05:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:05:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Sep-22 22:05:13 LOG4 got_cormsg: From DATATAKING: pnt tr 215200.0 +102748 -CJ 2008-Sep-22 22:05:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Sep-22 22:05:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Sep-22 22:05:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:05:13 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Sep-22 22:05:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:19 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Sep-22 22:08:27 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Sep-22 22:08:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Sep-22 22:08:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Sep-22 22:08:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Sep-22 22:08:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Sep-22 22:08:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Sep-22 22:08:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Sep-22 22:08:27 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Sep-22 22:08:27 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Sep-22 22:08:27 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Sep-22 22:08:27 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Sep-22 22:08:27 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Sep-22 22:08:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Sep-22 22:08:27 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Sep-22 22:08:27 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Sep-22 22:08:27 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Sep-22 22:08:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Sep-22 22:08:27 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Sep-22 22:08:27 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Sep-22 22:08:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Sep-22 22:08:29 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Sep-22 22:08:29 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Sep-22 22:08:29 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Sep-22 22:08:29 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Sep-22 22:08:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Sep-22 22:08:29 LOG1 config_iflo: Receiver ALFA already selected 2008-Sep-22 22:08:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:08:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:08:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:08:29 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Sep-22 22:08:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:08:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:08:29 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Sep-22 22:08:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:08:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:08:29 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Sep-22 22:08:29 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Sep-22 22:08:29 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Sep-22 22:08:29 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Sep-22 22:08:29 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Sep-22 22:08:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Sep-22 22:08:30 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Sep-22 22:08:30 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Sep-22 22:08:30 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Sep-22 22:08:30 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Sep-22 22:08:30 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Sep-22 22:08:30 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Sep-22 22:08:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Sep-22 22:08:30 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Sep-22 22:08:30 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Sep-22 22:08:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Sep-22 22:08:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:08:30 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Sep-22 22:08:30 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Sep-22 22:08:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-22 22:08:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:08:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:08:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:08:30 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Sep-22 22:08:30 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Sep-22 22:08:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Sep-22 22:08:30 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Sep-22 22:08:30 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Sep-22 22:08:30 DONE finish_task: DONE finished configuration: IF/LO path 2008-Sep-22 22:08:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:08:30 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Sep-22 22:08:30 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Sep-22 22:08:30 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Sep-22 22:08:30 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Sep-22 22:08:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Sep-22 22:08:30 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Sep-22 22:08:30 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Sep-22 22:08:30 START begin_task: Starting task 'selecting calibration port' 2008-Sep-22 22:08:30 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Sep-22 22:08:30 LOG3 vw_send: To DATATAKING: calport 3 2008-Sep-22 22:08:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Sep-22 22:08:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:08:30 START begin_task: Starting task 'waiting on calport' 2008-Sep-22 22:08:30 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Sep-22 22:08:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:30 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Sep-22 22:08:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:08:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:08:30 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Sep-22 22:08:30 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Sep-22 22:08:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Sep-22 22:08:30 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Sep-22 22:08:30 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Sep-22 22:08:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 22:08:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 22:08:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:08:30 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Sep-22 22:08:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:08:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 22:08:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:08:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:08:30 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Sep-22 22:08:31 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Sep-22 22:08:31 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Sep-22 22:08:31 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Sep-22 22:08:31 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Sep-22 22:08:31 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Sep-22 22:08:31 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Sep-22 22:08:31 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Sep-22 22:08:31 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Sep-22 22:08:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 22:08:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 22:08:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 22:08:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 22:08:31 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Sep-22 22:08:31 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Sep-22 22:08:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:08:31 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Sep-22 22:08:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:08:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 22:08:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:08:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:08:31 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Sep-22 22:08:31 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Sep-22 22:08:31 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Sep-22 22:08:31 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Sep-22 22:08:31 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Sep-22 22:08:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:08:31 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Sep-22 22:08:31 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Sep-22 22:08:31 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Sep-22 22:08:31 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Sep-22 22:08:31 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Sep-22 22:08:31 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Sep-22 22:08:31 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Sep-22 22:08:31 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Sep-22 22:08:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Sep-22 22:08:31 LOG3 track_source: Calling 'track_source galfasrc 215100.0 +102748 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Sep-22 22:08:31 START begin_task: Starting task 'sending tracking commands' 2008-Sep-22 22:08:31 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Sep-22 22:08:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Sep-22 22:08:31 INFO1 track_source: Starting to track galfasrc 2008-Sep-22 22:08:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Sep-22 22:08:31 LOG3 vw_send: To DATATAKING: set ra 215100.0 2008-Sep-22 22:08:31 LOG3 vw_send: To DATATAKING: set dec +102748 2008-Sep-22 22:08:31 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Sep-22 22:08:31 LOG3 vw_send: To DATATAKING: pnt tr 215100.0 +102748 -CJ 2008-Sep-22 22:08:31 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Sep-22 22:08:31 STOP finish_task: Finishing task 'sending tracking commands' 2008-Sep-22 22:08:31 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Sep-22 22:08:31 INFO2 finish_task: DONE finished sending: tracking commands 2008-Sep-22 22:08:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:08:31 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Sep-22 22:08:31 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Sep-22 22:08:31 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Sep-22 22:08:31 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Sep-22 22:08:31 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Sep-22 22:08:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:08:32 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Sep-22 22:08:32 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Sep-22 22:08:32 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Sep-22 22:08:32 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Sep-22 22:08:32 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Sep-22 22:08:32 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Sep-22 22:08:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Sep-22 22:08:32 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Sep-22 22:08:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Sep-22 22:08:32 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Sep-22 22:08:32 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Sep-22 22:08:32 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Sep-22 22:08:32 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Sep-22 22:08:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Sep-22 22:08:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Sep-22 22:08:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Sep-22 22:08:32 LOG4 got_cormsg: From DATATAKING: set ra 215100.0 2008-Sep-22 22:08:32 LOG4 got_cormsg: From DATATAKING: set dec +102748 2008-Sep-22 22:08:32 LOG4 got_cormsg: From DATATAKING: vw% 215100.0 2008-Sep-22 22:08:32 LOG4 got_cormsg: From DATATAKING: vw% +102748 2008-Sep-22 22:08:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Sep-22 22:08:32 LOG4 got_cormsg: From DATATAKING: pnt tr 215100.0 +102748 -CJ 2008-Sep-22 22:08:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Sep-22 22:08:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Sep-22 22:08:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 22:08:33 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Sep-22 22:08:33 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Sep-22 22:08:33 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Sep-22 22:08:33 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Sep-22 22:08:33 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Sep-22 22:08:33 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Sep-22 22:08:33 LOG5 finish_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Sep-22 22:08:33 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Sep-22 22:08:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:08:33 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Sep-22 22:08:33 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Sep-22 22:08:33 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Sep-22 22:08:33 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Sep-22 22:08:33 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Sep-22 22:08:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Sep-22 22:08:33 LOG3 waittrk: Start waittrk 5 2008-Sep-22 22:08:33 START begin_task: Starting task 'waiting on telescope movement' 2008-Sep-22 22:08:33 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Sep-22 22:08:38 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Sep-22 22:08:38 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Sep-22 22:08:38 START begin_task: Starting task 'waiting on telescope on source' 2008-Sep-22 22:08:38 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Sep-22 22:08:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Sep-22 22:08:51 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Sep-22 22:08:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Sep-22 22:08:51 INFO2 waittrk: Now tracking galfasrc 2008-Sep-22 22:08:51 LOG4 waittrk: Current telescope position: Az = 358.87 ZA = 7.81 2008-Sep-22 22:08:51 STOP finish_task: Finishing task 'waiting on telescope' 2008-Sep-22 22:08:51 LOG5 finish_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Sep-22 22:08:51 DONE finish_task: DONE finished waiting: telescope on source 2008-Sep-22 22:08:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:08:51 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Sep-22 22:08:51 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Sep-22 22:08:51 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Sep-22 22:08:51 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Sep-22 22:08:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Sep-22 22:08:52 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Sep-22 22:08:52 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Sep-22 22:08:52 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Sep-22 22:08:52 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Sep-22 22:08:52 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Sep-22 22:08:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Sep-22 22:08:52 START begin_task: Starting task 'selecting calibration type' 2008-Sep-22 22:08:52 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Sep-22 22:08:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-22 22:08:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-22 22:08:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:08:52 START begin_task: Starting task 'waiting on setcal' 2008-Sep-22 22:08:52 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Sep-22 22:08:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-22 22:08:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:08:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:08:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-22 22:08:52 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Sep-22 22:08:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-22 22:08:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:08:52 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-22 22:08:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:08:52 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Sep-22 22:08:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:08:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:08:53 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Sep-22 22:08:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:08:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-22 22:08:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:08:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:08:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:08:53 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Sep-22 22:08:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:08:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:08:53 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Sep-22 22:08:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:08:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:08:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-22 22:08:53 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Sep-22 22:08:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 22:08:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 22:08:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 22:08:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 22:08:53 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080922.a2010.0022.fits' is empty! 2008-Sep-22 22:08:53 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Sep-22 22:08:53 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Sep-22 22:08:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Sep-22 22:08:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 22:08:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 22:08:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:08:53 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Sep-22 22:08:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:08:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 22:08:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:08:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:08:53 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Sep-22 22:08:53 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Sep-22 22:08:53 START begin_task: Starting task 'adjusting WAPP power' 2008-Sep-22 22:08:53 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Sep-22 22:08:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Sep-22 22:08:53 INFO2 adjust_power: Starting to adjust WAPP power 2008-Sep-22 22:08:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Sep-22 22:08:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Sep-22 22:08:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:08:53 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Sep-22 22:08:53 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Sep-22 22:08:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Sep-22 22:08:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:08:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 22:08:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:08:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Sep-22 22:08:56 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Sep-22 22:08:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Sep-22 22:08:56 START begin_task: Starting task 'adjusting WAPP power' 2008-Sep-22 22:08:56 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Sep-22 22:08:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Sep-22 22:08:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-22 22:08:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-22 22:08:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-22 22:08:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-22 22:08:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Sep-22 22:08:56 LOG5 begin_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2008-Sep-22 22:08:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Sep-22 22:08:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:57 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Sep-22 22:08:57 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 2 dB 2008-Sep-22 22:08:57 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Sep-22 22:08:57 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 4 dB 2008-Sep-22 22:08:57 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Sep-22 22:08:57 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Sep-22 22:08:57 LOG5 end_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2008-Sep-22 22:08:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.064 0.951 ALFA beam 1: 0.938 0.915 2008-Sep-22 22:08:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.068 0.972 ALFA beam 3: 0.876 1.040 2008-Sep-22 22:08:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.891 0.919 ALFA beam 5: 1.133 1.081 2008-Sep-22 22:08:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.003 0.091 ALFA beam 7: 0.892 0.101 2008-Sep-22 22:08:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Sep-22 22:08:57 LOG5 finish_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Sep-22 22:08:57 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Sep-22 22:08:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:08:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Sep-22 22:08:57 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Sep-22 22:08:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-22 22:08:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Sep-22 22:08:57 LOG5 finish_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Sep-22 22:08:57 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Sep-22 22:08:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:08:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Sep-22 22:08:57 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Sep-22 22:08:57 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Sep-22 22:08:57 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Sep-22 22:08:57 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Sep-22 22:08:57 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:08:57 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73079 J 2008-Sep-22 22:08:57 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:08:57 LOG2 antvel: Parameters to Doppler: Topocentric 94136 2008 266 0.0 2008-Sep-22 22:08:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:08:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Sep-22 22:08:57 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Sep-22 22:08:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:08:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:08:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-22 22:08:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:08:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:08:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:08:57 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Sep-22 22:08:57 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.851881 2008.7307949907472 18.999933 2008-Sep-22 22:08:57 LOG4 log_alfabeam: ALFABEAM 0 21.849999999999760 10.463333333333335 2008-Sep-22 22:08:57 LOG4 log_alfabeam: ALFABEAM 1 21.848768260671047 10.567899002270888 2008-Sep-22 22:08:57 LOG4 log_alfabeam: ALFABEAM 2 21.844144598831573 10.497734735976049 2008-Sep-22 22:08:57 LOG4 log_alfabeam: ALFABEAM 3 21.845326151790129 10.393018153623274 2008-Sep-22 22:08:57 LOG4 log_alfabeam: ALFABEAM 4 21.851262220681519 10.358809291393067 2008-Sep-22 22:08:57 LOG4 log_alfabeam: ALFABEAM 5 21.855905045598661 10.429860141238994 2008-Sep-22 22:08:57 LOG4 log_alfabeam: ALFABEAM 6 21.854592725067096 10.534224749160309 2008-Sep-22 22:08:57 INFO2 take_data: Starting WAPP+GALFA scan: 826600075 2008-Sep-22 22:08:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:08:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:08:58 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Sep-22 22:08:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:08:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-22 22:08:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:08:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:08:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7739.00 2008-Sep-22 22:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:09:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:09:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:09:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 0.978 0.972 0.934 2008-Sep-22 22:09:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.018 0.934 1.086 2008-Sep-22 22:09:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.957 1.201 1.118 2008-Sep-22 22:09:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.093 0.911 0.103 2008-Sep-22 22:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.203 (still bad) 2008-Sep-22 22:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.200 (still bad) 2008-Sep-22 22:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.200 (still bad) 2008-Sep-22 22:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.199 (still bad) 2008-Sep-22 22:09:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:09:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:09:09 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Sep-22 22:09:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:09:09 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Sep-22 22:09:09 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Sep-22 22:09:09 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Sep-22 22:09:09 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Sep-22 22:09:09 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:09:09 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:09:09 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:09:09 LOG2 antvel: Parameters to Doppler: Topocentric 94149 2008 266 0.0 2008-Sep-22 22:09:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:09:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Sep-22 22:09:09 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Sep-22 22:09:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:09:09 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:09:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-22 22:09:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:09:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:09:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:09:09 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Sep-22 22:09:09 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.855502 2008.7307954026924 18.999933 2008-Sep-22 22:09:09 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000488 10.463333333333328 2008-Sep-22 22:09:09 LOG4 log_alfabeam: ALFABEAM 1 21.848815005009271 10.568016428383009 2008-Sep-22 22:09:09 LOG4 log_alfabeam: ALFABEAM 2 21.844160087805285 10.498303012622927 2008-Sep-22 22:09:09 LOG4 log_alfabeam: ALFABEAM 3 21.845294850748662 10.393473877038966 2008-Sep-22 22:09:09 LOG4 log_alfabeam: ALFABEAM 4 21.851215526667335 10.358688902536747 2008-Sep-22 22:09:09 LOG4 log_alfabeam: ALFABEAM 5 21.855889964896818 10.429287061517831 2008-Sep-22 22:09:09 LOG4 log_alfabeam: ALFABEAM 6 21.854624289138982 10.533776921963529 2008-Sep-22 22:09:09 INFO2 take_data: Starting WAPP+GALFA scan: 826600076 2008-Sep-22 22:09:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:09:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:09:10 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Sep-22 22:09:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:09:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-22 22:09:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:09:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:09:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.201 (still bad) 2008-Sep-22 22:09:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7751.00 2008-Sep-22 22:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:09:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.180 (still bad) 2008-Sep-22 22:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.179 (still bad) 2008-Sep-22 22:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.179 (still bad) 2008-Sep-22 22:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.178 (still bad) 2008-Sep-22 22:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.181 (still bad) 2008-Sep-22 22:09:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:09:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:09:21 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Sep-22 22:09:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:09:21 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Sep-22 22:09:21 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Sep-22 22:09:21 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Sep-22 22:09:21 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Sep-22 22:09:21 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:09:21 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:09:21 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:09:21 LOG2 antvel: Parameters to Doppler: Topocentric 94161 2008 266 0.0 2008-Sep-22 22:09:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:09:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Sep-22 22:09:21 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Sep-22 22:09:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:09:21 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:09:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-22 22:09:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:09:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:09:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:09:21 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Sep-22 22:09:21 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.858844 2008.7307957829494 18.999933 2008-Sep-22 22:09:21 LOG4 log_alfabeam: ALFABEAM 0 21.850000000004130 10.463333333333308 2008-Sep-22 22:09:21 LOG4 log_alfabeam: ALFABEAM 1 21.848858194572792 10.568120777197931 2008-Sep-22 22:09:21 LOG4 log_alfabeam: ALFABEAM 2 21.844174607932896 10.498826160140828 2008-Sep-22 22:09:21 LOG4 log_alfabeam: ALFABEAM 3 21.845266143004576 10.393897183072491 2008-Sep-22 22:09:21 LOG4 log_alfabeam: ALFABEAM 4 21.851172381207999 10.358581813253043 2008-Sep-22 22:09:21 LOG4 log_alfabeam: ALFABEAM 5 21.855875817772343 10.428759407522035 2008-Sep-22 22:09:21 LOG4 log_alfabeam: ALFABEAM 6 21.854653245879909 10.533360857097165 2008-Sep-22 22:09:21 INFO2 take_data: Starting WAPP+GALFA scan: 826600077 2008-Sep-22 22:09:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:09:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:09:22 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Sep-22 22:09:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:09:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-22 22:09:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:09:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:09:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:09:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7763.00 2008-Sep-22 22:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.177 (still bad) 2008-Sep-22 22:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.173 (still bad) 2008-Sep-22 22:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.175 (still bad) 2008-Sep-22 22:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.173 (still bad) 2008-Sep-22 22:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.173 (still bad) 2008-Sep-22 22:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.177 (still bad) 2008-Sep-22 22:09:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:09:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:09:33 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Sep-22 22:09:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:09:33 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Sep-22 22:09:33 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Sep-22 22:09:33 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Sep-22 22:09:33 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Sep-22 22:09:33 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:09:33 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:09:33 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:09:33 LOG2 antvel: Parameters to Doppler: Topocentric 94173 2008 266 0.0 2008-Sep-22 22:09:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:09:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Sep-22 22:09:33 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Sep-22 22:09:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:09:33 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:09:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-22 22:09:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:09:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:09:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:09:33 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Sep-22 22:09:33 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.862187 2008.7307961632064 18.999933 2008-Sep-22 22:09:33 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000421 10.463333333333333 2008-Sep-22 22:09:33 LOG4 log_alfabeam: ALFABEAM 1 21.848901437017485 10.568221275255713 2008-Sep-22 22:09:33 LOG4 log_alfabeam: ALFABEAM 2 21.844189346355030 10.499348112943048 2008-Sep-22 22:09:33 LOG4 log_alfabeam: ALFABEAM 3 21.845237604375207 10.394323154941207 2008-Sep-22 22:09:33 LOG4 log_alfabeam: ALFABEAM 4 21.851129180609103 10.358478568789087 2008-Sep-22 22:09:33 LOG4 log_alfabeam: ALFABEAM 5 21.855861448709302 10.428232877391766 2008-Sep-22 22:09:33 LOG4 log_alfabeam: ALFABEAM 6 21.854682039504425 10.532942082048960 2008-Sep-22 22:09:33 INFO2 take_data: Starting WAPP+GALFA scan: 826600078 2008-Sep-22 22:09:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:09:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:09:34 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Sep-22 22:09:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:09:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-22 22:09:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:09:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:09:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:09:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7775.00 2008-Sep-22 22:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.177 (still bad) 2008-Sep-22 22:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.158 (still bad) 2008-Sep-22 22:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.158 (still bad) 2008-Sep-22 22:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.158 (still bad) 2008-Sep-22 22:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.159 (still bad) 2008-Sep-22 22:09:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:09:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:09:45 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Sep-22 22:09:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:09:45 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Sep-22 22:09:45 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Sep-22 22:09:45 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Sep-22 22:09:45 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Sep-22 22:09:45 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:09:45 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:09:45 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:09:45 LOG2 antvel: Parameters to Doppler: Topocentric 94185 2008 266 0.0 2008-Sep-22 22:09:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:09:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Sep-22 22:09:45 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Sep-22 22:09:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:09:45 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:09:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-22 22:09:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:09:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:09:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:09:45 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Sep-22 22:09:45 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.865529 2008.7307965434634 18.999933 2008-Sep-22 22:09:45 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000456 10.463333333333331 2008-Sep-22 22:09:45 LOG4 log_alfabeam: ALFABEAM 1 21.848944701508096 10.568317851990189 2008-Sep-22 22:09:45 LOG4 log_alfabeam: ALFABEAM 2 21.844204292497853 10.499868499547338 2008-Sep-22 22:09:45 LOG4 log_alfabeam: ALFABEAM 3 21.845209255151651 10.394751487982319 2008-Sep-22 22:09:45 LOG4 log_alfabeam: ALFABEAM 4 21.851085955691385 10.358379241988739 2008-Sep-22 22:09:45 LOG4 log_alfabeam: ALFABEAM 5 21.855846867985033 10.427707846419512 2008-Sep-22 22:09:45 LOG4 log_alfabeam: ALFABEAM 6 21.854710649511507 10.532520895526865 2008-Sep-22 22:09:45 INFO2 take_data: Starting WAPP+GALFA scan: 826600079 2008-Sep-22 22:09:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:09:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:09:46 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Sep-22 22:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.157 (still bad) 2008-Sep-22 22:09:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:09:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-22 22:09:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:09:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:09:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:09:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7787.00 2008-Sep-22 22:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.159 (still bad) 2008-Sep-22 22:09:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.128 (still bad) 2008-Sep-22 22:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.128 (still bad) 2008-Sep-22 22:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.127 (still bad) 2008-Sep-22 22:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.128 (still bad) 2008-Sep-22 22:09:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:09:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:09:57 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Sep-22 22:09:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:09:57 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Sep-22 22:09:57 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Sep-22 22:09:57 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Sep-22 22:09:57 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Sep-22 22:09:57 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:09:57 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:09:57 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:09:57 LOG2 antvel: Parameters to Doppler: Topocentric 94197 2008 266 0.0 2008-Sep-22 22:09:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:09:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Sep-22 22:09:57 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Sep-22 22:09:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:09:57 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:09:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-22 22:09:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:09:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:09:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:09:57 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Sep-22 22:09:57 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.868872 2008.7307969237204 18.999933 2008-Sep-22 22:09:57 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000204 10.463333333333340 2008-Sep-22 22:09:57 LOG4 log_alfabeam: ALFABEAM 1 21.848988008955388 10.568410556107528 2008-Sep-22 22:09:57 LOG4 log_alfabeam: ALFABEAM 2 21.844219453470597 10.500387572651134 2008-Sep-22 22:09:57 LOG4 log_alfabeam: ALFABEAM 3 21.845181081517854 10.395182387846368 2008-Sep-22 22:09:57 LOG4 log_alfabeam: ALFABEAM 4 21.851042685552795 10.358283783136779 2008-Sep-22 22:09:57 LOG4 log_alfabeam: ALFABEAM 5 21.855832068622430 10.427184060231490 2008-Sep-22 22:09:57 LOG4 log_alfabeam: ALFABEAM 6 21.854739089812810 10.532097094529968 2008-Sep-22 22:09:57 INFO2 take_data: Starting WAPP+GALFA scan: 826600080 2008-Sep-22 22:09:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:09:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:09:58 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Sep-22 22:09:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:09:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-22 22:09:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:09:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:09:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.130 (still bad) 2008-Sep-22 22:09:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7799.00 2008-Sep-22 22:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.130 (still bad) 2008-Sep-22 22:10:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:10:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.949 0.933 0.912 2008-Sep-22 22:10:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.991 0.883 1.058 2008-Sep-22 22:10:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 0.933 1.119 1.075 2008-Sep-22 22:10:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.093 0.900 0.103 2008-Sep-22 22:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:10:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:10:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:10:09 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Sep-22 22:10:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:10:09 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Sep-22 22:10:09 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Sep-22 22:10:09 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Sep-22 22:10:09 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Sep-22 22:10:09 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:10:09 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:10:09 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:10:09 LOG2 antvel: Parameters to Doppler: Topocentric 94209 2008 266 0.0 2008-Sep-22 22:10:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:10:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Sep-22 22:10:09 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Sep-22 22:10:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:10:09 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:10:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-22 22:10:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:10:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:10:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:10:09 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Sep-22 22:10:09 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.872214 2008.7307973039776 18.999933 2008-Sep-22 22:10:09 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000257 10.463333333333336 2008-Sep-22 22:10:09 LOG4 log_alfabeam: ALFABEAM 1 21.849031328466229 10.568499324419667 2008-Sep-22 22:10:09 LOG4 log_alfabeam: ALFABEAM 2 21.844234818298428 10.500904963556129 2008-Sep-22 22:10:09 LOG4 log_alfabeam: ALFABEAM 3 21.845153103411317 10.395615545263238 2008-Sep-22 22:10:09 LOG4 log_alfabeam: ALFABEAM 4 21.850999401057049 10.358192257706968 2008-Sep-22 22:10:09 LOG4 log_alfabeam: ALFABEAM 5 21.855817061300485 10.426661891478197 2008-Sep-22 22:10:09 LOG4 log_alfabeam: ALFABEAM 6 21.854767340244013 10.531670982478884 2008-Sep-22 22:10:09 INFO2 take_data: Starting WAPP+GALFA scan: 826600081 2008-Sep-22 22:10:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:10:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:10:10 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Sep-22 22:10:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:10:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-22 22:10:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:10:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:10:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:10:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7811.00 2008-Sep-22 22:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:10:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:10:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:10:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:10:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:10:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:10:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:10:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:10:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:10:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.108 (still bad) 2008-Sep-22 22:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.109 (still bad) 2008-Sep-22 22:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.107 (still bad) 2008-Sep-22 22:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.107 (still bad) 2008-Sep-22 22:10:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:10:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:10:21 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Sep-22 22:10:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:10:21 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Sep-22 22:10:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Sep-22 22:10:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-22 22:10:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-22 22:10:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:10:21 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Sep-22 22:10:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:10:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-22 22:10:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:10:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:10:21 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Sep-22 22:10:21 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Sep-22 22:10:21 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Sep-22 22:10:21 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Sep-22 22:10:21 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:10:21 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:10:21 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:10:21 LOG2 antvel: Parameters to Doppler: Topocentric 94221 2008 266 0.0 2008-Sep-22 22:10:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:10:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Sep-22 22:10:21 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Sep-22 22:10:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:10:21 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:10:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-22 22:10:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:10:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:10:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:10:21 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Sep-22 22:10:21 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.875557 2008.7307976842346 18.999933 2008-Sep-22 22:10:21 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000090 10.463333333333331 2008-Sep-22 22:10:21 LOG4 log_alfabeam: ALFABEAM 1 21.849074680974461 10.568584203682965 2008-Sep-22 22:10:21 LOG4 log_alfabeam: ALFABEAM 2 21.844250394199594 10.501420924293347 2008-Sep-22 22:10:21 LOG4 log_alfabeam: ALFABEAM 3 21.845125307105047 10.396051167170489 2008-Sep-22 22:10:21 LOG4 log_alfabeam: ALFABEAM 4 21.850956081285091 10.358104617931719 2008-Sep-22 22:10:21 LOG4 log_alfabeam: ALFABEAM 5 21.855801838935200 10.426141086431498 2008-Sep-22 22:10:21 LOG4 log_alfabeam: ALFABEAM 6 21.854795414627773 10.531242355074509 2008-Sep-22 22:10:21 INFO2 take_data: Starting WAPP+GALFA scan: 826600082 2008-Sep-22 22:10:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:10:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:10:22 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Sep-22 22:10:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:10:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-22 22:10:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:10:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:10:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:10:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7823.00 2008-Sep-22 22:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.105 (still bad) 2008-Sep-22 22:10:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:10:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:10:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:10:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:10:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:10:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:10:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:10:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:10:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.679 (still bad) 2008-Sep-22 22:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.676 (still bad) 2008-Sep-22 22:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.681 (still bad) 2008-Sep-22 22:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.679 (still bad) 2008-Sep-22 22:10:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:10:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:10:33 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Sep-22 22:10:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:10:33 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Sep-22 22:10:33 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Sep-22 22:10:33 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Sep-22 22:10:33 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Sep-22 22:10:33 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:10:33 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:10:33 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:10:33 LOG2 antvel: Parameters to Doppler: Topocentric 94233 2008 266 0.0 2008-Sep-22 22:10:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:10:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Sep-22 22:10:33 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Sep-22 22:10:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:10:33 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:10:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-22 22:10:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:10:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:10:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:10:33 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Sep-22 22:10:33 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.878899 2008.7307980644916 18.999933 2008-Sep-22 22:10:33 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000065 10.463333333333335 2008-Sep-22 22:10:33 LOG4 log_alfabeam: ALFABEAM 1 21.849118035553317 10.568665138117122 2008-Sep-22 22:10:33 LOG4 log_alfabeam: ALFABEAM 2 21.844266169811110 10.501935089217129 2008-Sep-22 22:10:33 LOG4 log_alfabeam: ALFABEAM 3 21.845097712174244 10.396488939935612 2008-Sep-22 22:10:33 LOG4 log_alfabeam: ALFABEAM 4 21.850912757139476 10.358020921881682 2008-Sep-22 22:10:33 LOG4 log_alfabeam: ALFABEAM 5 21.855786412601478 10.425622014825054 2008-Sep-22 22:10:33 LOG4 log_alfabeam: ALFABEAM 6 21.854823293151149 10.530811520214000 2008-Sep-22 22:10:33 INFO2 take_data: Starting WAPP+GALFA scan: 826600083 2008-Sep-22 22:10:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:10:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:10:34 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Sep-22 22:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.679 (still bad) 2008-Sep-22 22:10:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:10:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-22 22:10:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:10:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:10:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:10:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7835.00 2008-Sep-22 22:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.649 (still bad) 2008-Sep-22 22:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.647 (still bad) 2008-Sep-22 22:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.648 (still bad) 2008-Sep-22 22:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.645 (still bad) 2008-Sep-22 22:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.647 (still bad) 2008-Sep-22 22:10:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:10:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:10:45 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Sep-22 22:10:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:10:45 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Sep-22 22:10:45 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Sep-22 22:10:45 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Sep-22 22:10:45 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Sep-22 22:10:45 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:10:45 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:10:45 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:10:45 LOG2 antvel: Parameters to Doppler: Topocentric 94245 2008 266 0.0 2008-Sep-22 22:10:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:10:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Sep-22 22:10:45 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Sep-22 22:10:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:10:45 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:10:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-22 22:10:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:10:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:10:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:10:45 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Sep-22 22:10:45 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.882242 2008.7307984447486 18.999933 2008-Sep-22 22:10:45 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000065 10.463333333333335 2008-Sep-22 22:10:45 LOG4 log_alfabeam: ALFABEAM 1 21.849161413157297 10.568742172519391 2008-Sep-22 22:10:45 LOG4 log_alfabeam: ALFABEAM 2 21.844282152460213 10.502447709682203 2008-Sep-22 22:10:45 LOG4 log_alfabeam: ALFABEAM 3 21.845070304980926 10.396929071783349 2008-Sep-22 22:10:45 LOG4 log_alfabeam: ALFABEAM 4 21.850869407680484 10.357941123745757 2008-Sep-22 22:10:45 LOG4 log_alfabeam: ALFABEAM 5 21.855770775106233 10.425104423585235 2008-Sep-22 22:10:45 LOG4 log_alfabeam: ALFABEAM 6 21.854850989549842 10.530378272300682 2008-Sep-22 22:10:45 INFO2 take_data: Starting WAPP+GALFA scan: 826600084 2008-Sep-22 22:10:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:10:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:10:46 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Sep-22 22:10:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:10:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-22 22:10:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:10:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:10:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.645 (still bad) 2008-Sep-22 22:10:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7847.00 2008-Sep-22 22:10:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:10:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:10:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:10:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:10:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:10:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:10:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:10:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:10:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.640 (still bad) 2008-Sep-22 22:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.638 (still bad) 2008-Sep-22 22:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.639 (still bad) 2008-Sep-22 22:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.641 (still bad) 2008-Sep-22 22:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.641 (still bad) 2008-Sep-22 22:10:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:10:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:10:57 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Sep-22 22:10:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:10:57 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Sep-22 22:10:57 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Sep-22 22:10:57 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Sep-22 22:10:57 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Sep-22 22:10:57 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:10:57 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:10:57 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:10:57 LOG2 antvel: Parameters to Doppler: Topocentric 94257 2008 266 0.0 2008-Sep-22 22:10:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:10:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Sep-22 22:10:57 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Sep-22 22:10:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:10:57 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:10:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-22 22:10:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:10:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:10:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:10:57 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Sep-22 22:10:57 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.885584 2008.7307988250059 18.999933 2008-Sep-22 22:10:57 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000076 10.463333333333331 2008-Sep-22 22:10:57 LOG4 log_alfabeam: ALFABEAM 1 21.849204782849419 10.568815258529829 2008-Sep-22 22:10:57 LOG4 log_alfabeam: ALFABEAM 2 21.844298330405486 10.502958423357121 2008-Sep-22 22:10:57 LOG4 log_alfabeam: ALFABEAM 3 21.845043104724436 10.397371244973217 2008-Sep-22 22:10:57 LOG4 log_alfabeam: ALFABEAM 4 21.850826063824975 10.357865274175177 2008-Sep-22 22:10:57 LOG4 log_alfabeam: ALFABEAM 5 21.855754937911900 10.424588679260475 2008-Sep-22 22:10:57 LOG4 log_alfabeam: ALFABEAM 6 21.854878484375547 10.529942923461912 2008-Sep-22 22:10:57 INFO2 take_data: Starting WAPP+GALFA scan: 826600085 2008-Sep-22 22:10:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:10:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:10:58 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Sep-22 22:10:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:10:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-22 22:10:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:10:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:10:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:10:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7859.00 2008-Sep-22 22:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.643 (still bad) 2008-Sep-22 22:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.614 (still bad) 2008-Sep-22 22:11:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:11:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.497 1.300 1.298 1.250 2008-Sep-22 22:11:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.474 1.373 1.261 1.467 2008-Sep-22 22:11:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.288 1.320 1.614 1.459 2008-Sep-22 22:11:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.455 0.094 1.282 0.104 2008-Sep-22 22:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.618 (still bad) 2008-Sep-22 22:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.615 (still bad) 2008-Sep-22 22:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.614 (still bad) 2008-Sep-22 22:11:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:11:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:11:09 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Sep-22 22:11:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:11:09 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Sep-22 22:11:09 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Sep-22 22:11:09 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Sep-22 22:11:09 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Sep-22 22:11:09 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:11:09 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:11:09 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:11:09 LOG2 antvel: Parameters to Doppler: Topocentric 94269 2008 266 0.0 2008-Sep-22 22:11:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:11:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Sep-22 22:11:09 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Sep-22 22:11:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:11:09 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:11:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-22 22:11:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:11:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:11:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:11:09 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Sep-22 22:11:09 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.888926 2008.7307992052629 18.999933 2008-Sep-22 22:11:09 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000055 10.463333333333335 2008-Sep-22 22:11:09 LOG4 log_alfabeam: ALFABEAM 1 21.849248152627350 10.568884418866702 2008-Sep-22 22:11:09 LOG4 log_alfabeam: ALFABEAM 2 21.844314706153742 10.503467328908398 2008-Sep-22 22:11:09 LOG4 log_alfabeam: ALFABEAM 3 21.845016105905287 10.397815535765774 2008-Sep-22 22:11:09 LOG4 log_alfabeam: ALFABEAM 4 21.850782717583023 10.357793350261707 2008-Sep-22 22:11:09 LOG4 log_alfabeam: ALFABEAM 5 21.855738898544857 10.424074682974732 2008-Sep-22 22:11:09 LOG4 log_alfabeam: ALFABEAM 6 21.854905783136182 10.529505398040223 2008-Sep-22 22:11:09 INFO2 take_data: Starting WAPP+GALFA scan: 826600086 2008-Sep-22 22:11:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:11:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:11:10 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Sep-22 22:11:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:11:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-22 22:11:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:11:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:11:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:11:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7871.00 2008-Sep-22 22:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.613 (still bad) 2008-Sep-22 22:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.570 (still bad) 2008-Sep-22 22:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.571 (still bad) 2008-Sep-22 22:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.572 (still bad) 2008-Sep-22 22:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.572 (still bad) 2008-Sep-22 22:11:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.572 (still bad) 2008-Sep-22 22:11:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:11:21 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Sep-22 22:11:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:11:21 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Sep-22 22:11:21 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Sep-22 22:11:21 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Sep-22 22:11:21 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Sep-22 22:11:21 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:11:21 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:11:21 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:11:21 LOG2 antvel: Parameters to Doppler: Topocentric 94281 2008 266 0.0 2008-Sep-22 22:11:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:11:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Sep-22 22:11:21 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Sep-22 22:11:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:11:21 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:11:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-22 22:11:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:11:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:11:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:11:21 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Sep-22 22:11:21 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.892269 2008.7307995855199 18.999933 2008-Sep-22 22:11:21 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000005 10.463333333333331 2008-Sep-22 22:11:21 LOG4 log_alfabeam: ALFABEAM 1 21.849291530497730 10.568949672906694 2008-Sep-22 22:11:21 LOG4 log_alfabeam: ALFABEAM 2 21.844331282384442 10.503974523570756 2008-Sep-22 22:11:21 LOG4 log_alfabeam: ALFABEAM 3 21.844989303189688 10.398262022334372 2008-Sep-22 22:11:21 LOG4 log_alfabeam: ALFABEAM 4 21.850739360953071 10.357725332437116 2008-Sep-22 22:11:21 LOG4 log_alfabeam: ALFABEAM 5 21.855722654355603 10.423562337235950 2008-Sep-22 22:11:21 LOG4 log_alfabeam: ALFABEAM 6 21.854932891177526 10.529065618425529 2008-Sep-22 22:11:21 INFO2 take_data: Starting WAPP+GALFA scan: 826600087 2008-Sep-22 22:11:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:11:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:11:22 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Sep-22 22:11:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:11:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-22 22:11:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:11:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:11:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:11:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7883.00 2008-Sep-22 22:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.573 (still bad) 2008-Sep-22 22:11:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:11:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:11:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:11:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:11:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:11:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:11:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:11:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:11:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.562 (still bad) 2008-Sep-22 22:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.563 (still bad) 2008-Sep-22 22:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.561 (still bad) 2008-Sep-22 22:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.563 (still bad) 2008-Sep-22 22:11:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:11:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:11:33 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Sep-22 22:11:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:11:33 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Sep-22 22:11:33 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Sep-22 22:11:33 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Sep-22 22:11:33 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Sep-22 22:11:33 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:11:33 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:11:33 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:11:33 LOG2 antvel: Parameters to Doppler: Topocentric 94293 2008 266 0.0 2008-Sep-22 22:11:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:11:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Sep-22 22:11:33 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Sep-22 22:11:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:11:33 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:11:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-22 22:11:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:11:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:11:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:11:33 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Sep-22 22:11:33 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.895611 2008.7307999657769 18.999933 2008-Sep-22 22:11:33 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000065 10.463333333333340 2008-Sep-22 22:11:33 LOG4 log_alfabeam: ALFABEAM 1 21.849334885552871 10.569010983406718 2008-Sep-22 22:11:33 LOG4 log_alfabeam: ALFABEAM 2 21.844348046810353 10.504479650454824 2008-Sep-22 22:11:33 LOG4 log_alfabeam: ALFABEAM 3 21.844962715190540 10.398710381271794 2008-Sep-22 22:11:33 LOG4 log_alfabeam: ALFABEAM 4 21.850696024830704 10.357661260230948 2008-Sep-22 22:11:33 LOG4 log_alfabeam: ALFABEAM 5 21.855706217367043 10.423052003330891 2008-Sep-22 22:11:33 LOG4 log_alfabeam: ALFABEAM 6 21.854959789622185 10.528623902610008 2008-Sep-22 22:11:33 INFO2 take_data: Starting WAPP+GALFA scan: 826600088 2008-Sep-22 22:11:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:11:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:11:34 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Sep-22 22:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.558 (still bad) 2008-Sep-22 22:11:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:11:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-22 22:11:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:11:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:11:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:11:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7895.00 2008-Sep-22 22:11:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:11:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:11:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:11:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:11:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:11:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:11:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:11:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.559 (still bad) 2008-Sep-22 22:11:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.547 (still bad) 2008-Sep-22 22:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.543 (still bad) 2008-Sep-22 22:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.543 (still bad) 2008-Sep-22 22:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.546 (still bad) 2008-Sep-22 22:11:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:11:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:11:45 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Sep-22 22:11:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:11:45 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Sep-22 22:11:45 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Sep-22 22:11:45 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Sep-22 22:11:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Sep-22 22:11:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 22:11:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 22:11:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:11:45 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Sep-22 22:11:45 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:11:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 22:11:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:11:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:11:45 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Sep-22 22:11:45 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Sep-22 22:11:45 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Sep-22 22:11:45 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Sep-22 22:11:45 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Sep-22 22:11:45 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:11:45 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:11:45 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:11:45 LOG2 antvel: Parameters to Doppler: Topocentric 94305 2008 266 0.0 2008-Sep-22 22:11:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:11:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Sep-22 22:11:45 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Sep-22 22:11:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:11:45 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:11:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-22 22:11:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:11:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:11:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:11:45 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Sep-22 22:11:45 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.898954 2008.7308003460339 18.999933 2008-Sep-22 22:11:45 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000009 10.463333333333331 2008-Sep-22 22:11:45 LOG4 log_alfabeam: ALFABEAM 1 21.849378238795257 10.569068390200709 2008-Sep-22 22:11:45 LOG4 log_alfabeam: ALFABEAM 2 21.844365007031833 10.504982959165320 2008-Sep-22 22:11:45 LOG4 log_alfabeam: ALFABEAM 3 21.844936328497134 10.399160824030011 2008-Sep-22 22:11:45 LOG4 log_alfabeam: ALFABEAM 4 21.850652688226216 10.357601092787075 2008-Sep-22 22:11:45 LOG4 log_alfabeam: ALFABEAM 5 21.855689580110358 10.422543429876661 2008-Sep-22 22:11:45 LOG4 log_alfabeam: ALFABEAM 6 21.854986491982356 10.528180041746621 2008-Sep-22 22:11:45 INFO2 take_data: Starting WAPP+GALFA scan: 826600089 2008-Sep-22 22:11:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:11:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:11:46 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Sep-22 22:11:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:11:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-22 22:11:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:11:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:11:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.548 (still bad) 2008-Sep-22 22:11:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7907.00 2008-Sep-22 22:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.548 (still bad) 2008-Sep-22 22:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.201 (still bad) 2008-Sep-22 22:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.202 (still bad) 2008-Sep-22 22:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.203 (still bad) 2008-Sep-22 22:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.203 (still bad) 2008-Sep-22 22:11:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:11:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:11:57 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Sep-22 22:11:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:11:57 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Sep-22 22:11:57 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Sep-22 22:11:57 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Sep-22 22:11:57 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Sep-22 22:11:57 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:11:57 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:11:57 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:11:57 LOG2 antvel: Parameters to Doppler: Topocentric 94317 2008 266 0.0 2008-Sep-22 22:11:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:11:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Sep-22 22:11:57 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Sep-22 22:11:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:11:57 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:11:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-22 22:11:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:11:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:11:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:11:57 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Sep-22 22:11:57 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.902296 2008.7308007262911 18.999933 2008-Sep-22 22:11:57 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000030 10.463333333333333 2008-Sep-22 22:11:57 LOG4 log_alfabeam: ALFABEAM 1 21.849421559364934 10.569121863424142 2008-Sep-22 22:11:57 LOG4 log_alfabeam: ALFABEAM 2 21.844382150412113 10.505484096740755 2008-Sep-22 22:11:57 LOG4 log_alfabeam: ALFABEAM 3 21.844910161317564 10.399613023763719 2008-Sep-22 22:11:57 LOG4 log_alfabeam: ALFABEAM 4 21.850609381992253 10.357544862249094 2008-Sep-22 22:11:57 LOG4 log_alfabeam: ALFABEAM 5 21.855672754967653 10.422036974343078 2008-Sep-22 22:11:57 LOG4 log_alfabeam: ALFABEAM 6 21.855012979774891 10.527734357406780 2008-Sep-22 22:11:57 INFO2 take_data: Starting WAPP+GALFA scan: 826600090 2008-Sep-22 22:11:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:11:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:11:58 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Sep-22 22:11:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:11:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-22 22:11:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:11:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:11:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:11:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7919.00 2008-Sep-22 22:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.202 (still bad) 2008-Sep-22 22:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.180 (still bad) 2008-Sep-22 22:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.179 (still bad) 2008-Sep-22 22:12:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:12:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 0.966 0.965 0.925 2008-Sep-22 22:12:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.006 0.920 1.077 2008-Sep-22 22:12:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.949 1.180 1.102 2008-Sep-22 22:12:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.094 0.915 0.104 2008-Sep-22 22:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.181 (still bad) 2008-Sep-22 22:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.180 (still bad) 2008-Sep-22 22:12:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:12:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:12:09 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Sep-22 22:12:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:12:09 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Sep-22 22:12:09 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Sep-22 22:12:09 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Sep-22 22:12:09 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Sep-22 22:12:09 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:12:09 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:12:09 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:12:09 LOG2 antvel: Parameters to Doppler: Topocentric 94329 2008 266 0.0 2008-Sep-22 22:12:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:12:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Sep-22 22:12:09 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Sep-22 22:12:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:12:09 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:12:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-22 22:12:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:12:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:12:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:12:09 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Sep-22 22:12:09 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.905639 2008.7308011065481 18.999933 2008-Sep-22 22:12:09 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000076 10.463333333333340 2008-Sep-22 22:12:09 LOG4 log_alfabeam: ALFABEAM 1 21.849464868282581 10.569171440889489 2008-Sep-22 22:12:09 LOG4 log_alfabeam: ALFABEAM 2 21.844399484662244 10.505983312054711 2008-Sep-22 22:12:09 LOG4 log_alfabeam: ALFABEAM 3 21.844884200335031 10.400067193221831 2008-Sep-22 22:12:09 LOG4 log_alfabeam: ALFABEAM 4 21.850566085120462 10.357492529778447 2008-Sep-22 22:12:09 LOG4 log_alfabeam: ALFABEAM 5 21.855655734359075 10.421532386052768 2008-Sep-22 22:12:09 LOG4 log_alfabeam: ALFABEAM 6 21.855039266420491 10.527286639438135 2008-Sep-22 22:12:09 INFO2 take_data: Starting WAPP+GALFA scan: 826600091 2008-Sep-22 22:12:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:12:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:12:10 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Sep-22 22:12:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:12:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-22 22:12:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:12:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:12:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:12:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7931.00 2008-Sep-22 22:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.180 (still bad) 2008-Sep-22 22:12:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:12:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:12:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:12:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:12:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:12:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:12:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:12:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:12:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.173 (still bad) 2008-Sep-22 22:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.173 (still bad) 2008-Sep-22 22:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.172 (still bad) 2008-Sep-22 22:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.173 (still bad) 2008-Sep-22 22:12:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:12:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:12:21 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Sep-22 22:12:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:12:21 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Sep-22 22:12:21 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Sep-22 22:12:21 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Sep-22 22:12:21 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Sep-22 22:12:21 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:12:21 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:12:21 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:12:21 LOG2 antvel: Parameters to Doppler: Topocentric 94341 2008 266 0.0 2008-Sep-22 22:12:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:12:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Sep-22 22:12:21 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Sep-22 22:12:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:12:21 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:12:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-22 22:12:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:12:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:12:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:12:21 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Sep-22 22:12:21 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.908981 2008.7308014868051 18.999933 2008-Sep-22 22:12:21 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000087 10.463333333333335 2008-Sep-22 22:12:21 LOG4 log_alfabeam: ALFABEAM 1 21.849508134758818 10.569217100065208 2008-Sep-22 22:12:21 LOG4 log_alfabeam: ALFABEAM 2 21.844416996808942 10.506480256300804 2008-Sep-22 22:12:21 LOG4 log_alfabeam: ALFABEAM 3 21.844858463342366 10.400523002399071 2008-Sep-22 22:12:21 LOG4 log_alfabeam: ALFABEAM 4 21.850522828397366 10.357444120174801 2008-Sep-22 22:12:21 LOG4 log_alfabeam: ALFABEAM 5 21.855638531013255 10.421030018423419 2008-Sep-22 22:12:21 LOG4 log_alfabeam: ALFABEAM 6 21.855065333840990 10.526837212719622 2008-Sep-22 22:12:21 INFO2 take_data: Starting WAPP+GALFA scan: 826600092 2008-Sep-22 22:12:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:12:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:12:22 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Sep-22 22:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.175 (still bad) 2008-Sep-22 22:12:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:12:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-22 22:12:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:12:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:12:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:12:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7943.00 2008-Sep-22 22:12:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:12:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:12:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:12:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:12:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:12:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:12:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:12:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:12:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.156 (still bad) 2008-Sep-22 22:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.153 (still bad) 2008-Sep-22 22:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.154 (still bad) 2008-Sep-22 22:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.157 (still bad) 2008-Sep-22 22:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.156 (still bad) 2008-Sep-22 22:12:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:12:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:12:33 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Sep-22 22:12:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:12:33 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Sep-22 22:12:33 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Sep-22 22:12:33 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Sep-22 22:12:33 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Sep-22 22:12:33 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:12:33 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:12:33 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:12:33 LOG2 antvel: Parameters to Doppler: Topocentric 94353 2008 266 0.0 2008-Sep-22 22:12:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:12:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Sep-22 22:12:33 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Sep-22 22:12:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:12:33 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:12:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-22 22:12:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:12:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:12:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:12:33 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Sep-22 22:12:33 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.912324 2008.7308018670622 18.999933 2008-Sep-22 22:12:33 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000026 10.463333333333335 2008-Sep-22 22:12:33 LOG4 log_alfabeam: ALFABEAM 1 21.849551379831428 10.569258876716360 2008-Sep-22 22:12:33 LOG4 log_alfabeam: ALFABEAM 2 21.844434694674707 10.506975177598868 2008-Sep-22 22:12:33 LOG4 log_alfabeam: ALFABEAM 3 21.844832937118394 10.400980665345108 2008-Sep-22 22:12:33 LOG4 log_alfabeam: ALFABEAM 4 21.850479590796841 10.357399596642631 2008-Sep-22 22:12:33 LOG4 log_alfabeam: ALFABEAM 5 21.855621137237915 10.420529621504437 2008-Sep-22 22:12:33 LOG4 log_alfabeam: ALFABEAM 6 21.855091195363681 10.526385865789779 2008-Sep-22 22:12:33 INFO2 take_data: Starting WAPP+GALFA scan: 826600093 2008-Sep-22 22:12:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:12:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:12:34 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Sep-22 22:12:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:12:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-22 22:12:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:12:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:12:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.156 (still bad) 2008-Sep-22 22:12:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7955.00 2008-Sep-22 22:12:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:12:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:12:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:12:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:12:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:12:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:12:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:12:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:12:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.127 (still bad) 2008-Sep-22 22:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.127 (still bad) 2008-Sep-22 22:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.126 (still bad) 2008-Sep-22 22:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.128 (still bad) 2008-Sep-22 22:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.126 (still bad) 2008-Sep-22 22:12:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:12:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:12:45 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Sep-22 22:12:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:12:45 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Sep-22 22:12:45 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Sep-22 22:12:45 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Sep-22 22:12:45 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Sep-22 22:12:45 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:12:45 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:12:45 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:12:45 LOG2 antvel: Parameters to Doppler: Topocentric 94365 2008 266 0.0 2008-Sep-22 22:12:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:12:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Sep-22 22:12:45 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Sep-22 22:12:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:12:45 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:12:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-22 22:12:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:12:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:12:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:12:45 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Sep-22 22:12:45 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.915666 2008.7308022473192 18.999933 2008-Sep-22 22:12:45 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000030 10.463333333333340 2008-Sep-22 22:12:45 LOG4 log_alfabeam: ALFABEAM 1 21.849594572804193 10.569296755582906 2008-Sep-22 22:12:45 LOG4 log_alfabeam: ALFABEAM 2 21.844452564963252 10.507467731513398 2008-Sep-22 22:12:45 LOG4 log_alfabeam: ALFABEAM 3 21.844807639032606 10.401439849177413 2008-Sep-22 22:12:45 LOG4 log_alfabeam: ALFABEAM 4 21.850436403017383 10.357358976696078 2008-Sep-22 22:12:45 LOG4 log_alfabeam: ALFABEAM 5 21.855603566095677 10.420031544437878 2008-Sep-22 22:12:45 LOG4 log_alfabeam: ALFABEAM 6 21.855116833325063 10.525932926558623 2008-Sep-22 22:12:45 INFO2 take_data: Starting WAPP+GALFA scan: 826600094 2008-Sep-22 22:12:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:12:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:12:46 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Sep-22 22:12:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:12:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-22 22:12:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:12:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:12:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:12:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7967.00 2008-Sep-22 22:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.126 (still bad) 2008-Sep-22 22:12:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:12:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:12:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:12:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:12:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:12:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:12:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:12:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:12:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:12:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:12:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:12:57 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Sep-22 22:12:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:12:57 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Sep-22 22:12:57 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Sep-22 22:12:57 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Sep-22 22:12:57 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Sep-22 22:12:57 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:12:57 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:12:57 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:12:57 LOG2 antvel: Parameters to Doppler: Topocentric 94377 2008 266 0.0 2008-Sep-22 22:12:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:12:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Sep-22 22:12:57 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Sep-22 22:12:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:12:57 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:12:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-22 22:12:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:12:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-22 22:12:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:12:57 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Sep-22 22:12:57 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.919009 2008.7308026275764 18.999933 2008-Sep-22 22:12:57 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000026 10.463333333333331 2008-Sep-22 22:12:57 LOG4 log_alfabeam: ALFABEAM 1 21.849637734730777 10.569330770353723 2008-Sep-22 22:12:57 LOG4 log_alfabeam: ALFABEAM 2 21.844470615609275 10.507958165384467 2008-Sep-22 22:12:57 LOG4 log_alfabeam: ALFABEAM 3 21.844782555961142 10.401900769249856 2008-Sep-22 22:12:57 LOG4 log_alfabeam: ALFABEAM 4 21.850393244015947 10.357322225611370 2008-Sep-22 22:12:57 LOG4 log_alfabeam: ALFABEAM 5 21.855585809780756 10.419535538024629 2008-Sep-22 22:12:57 LOG4 log_alfabeam: ALFABEAM 6 21.855142260956764 10.525478182252288 2008-Sep-22 22:12:57 INFO2 take_data: Starting WAPP+GALFA scan: 826600095 2008-Sep-22 22:12:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:12:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:12:58 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Sep-22 22:12:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:12:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-22 22:12:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:12:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:12:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:12:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7979.00 2008-Sep-22 22:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.108 (still bad) 2008-Sep-22 22:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.106 (still bad) 2008-Sep-22 22:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.108 (still bad) 2008-Sep-22 22:13:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:13:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.943 0.931 0.904 2008-Sep-22 22:13:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.982 0.879 1.054 2008-Sep-22 22:13:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.900 0.932 1.107 1.064 2008-Sep-22 22:13:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.093 0.899 0.103 2008-Sep-22 22:13:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.106 (still bad) 2008-Sep-22 22:13:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:13:09 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Sep-22 22:13:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:13:09 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Sep-22 22:13:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Sep-22 22:13:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-22 22:13:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-22 22:13:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:13:09 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Sep-22 22:13:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:13:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-22 22:13:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:13:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:13:09 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Sep-22 22:13:09 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Sep-22 22:13:09 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Sep-22 22:13:09 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Sep-22 22:13:09 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:13:09 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:13:09 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:13:09 LOG2 antvel: Parameters to Doppler: Topocentric 94389 2008 266 0.0 2008-Sep-22 22:13:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:13:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Sep-22 22:13:09 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Sep-22 22:13:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:13:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:13:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-22 22:13:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:13:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:13:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:13:09 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Sep-22 22:13:09 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.922351 2008.7308030078334 18.999933 2008-Sep-22 22:13:09 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000030 10.463333333333333 2008-Sep-22 22:13:09 LOG4 log_alfabeam: ALFABEAM 1 21.849680835029755 10.569360912963061 2008-Sep-22 22:13:09 LOG4 log_alfabeam: ALFABEAM 2 21.844488833007311 10.508446139350998 2008-Sep-22 22:13:09 LOG4 log_alfabeam: ALFABEAM 3 21.844757704842024 10.402363090088350 2008-Sep-22 22:13:09 LOG4 log_alfabeam: ALFABEAM 4 21.850350144380904 10.357289353690700 2008-Sep-22 22:13:09 LOG4 log_alfabeam: ALFABEAM 5 21.855567881675622 10.419041946919213 2008-Sep-22 22:13:09 LOG4 log_alfabeam: ALFABEAM 6 21.855167461018102 10.525021963531437 2008-Sep-22 22:13:09 INFO2 take_data: Starting WAPP+GALFA scan: 826600096 2008-Sep-22 22:13:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:13:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:13:10 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Sep-22 22:13:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:13:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-22 22:13:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:13:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:13:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:13:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7991.00 2008-Sep-22 22:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.107 (still bad) 2008-Sep-22 22:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.676 (still bad) 2008-Sep-22 22:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.680 (still bad) 2008-Sep-22 22:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.679 (still bad) 2008-Sep-22 22:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.677 (still bad) 2008-Sep-22 22:13:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:13:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:13:21 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Sep-22 22:13:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:13:21 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Sep-22 22:13:21 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Sep-22 22:13:21 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Sep-22 22:13:21 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Sep-22 22:13:21 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:13:21 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:13:21 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:13:21 LOG2 antvel: Parameters to Doppler: Topocentric 94401 2008 266 0.0 2008-Sep-22 22:13:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:13:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Sep-22 22:13:21 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Sep-22 22:13:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:13:21 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:13:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-22 22:13:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:13:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:13:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:13:21 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Sep-22 22:13:21 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.925694 2008.7308033880904 18.999933 2008-Sep-22 22:13:21 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000023 10.463333333333340 2008-Sep-22 22:13:21 LOG4 log_alfabeam: ALFABEAM 1 21.849723894769618 10.569387214991787 2008-Sep-22 22:13:21 LOG4 log_alfabeam: ALFABEAM 2 21.844507225205664 10.508931899943718 2008-Sep-22 22:13:21 LOG4 log_alfabeam: ALFABEAM 3 21.844733072651550 10.402827028353492 2008-Sep-22 22:13:21 LOG4 log_alfabeam: ALFABEAM 4 21.850307083053789 10.357260328313700 2008-Sep-22 22:13:21 LOG4 log_alfabeam: ALFABEAM 5 21.855549773860439 10.418550522702397 2008-Sep-22 22:13:21 LOG4 log_alfabeam: ALFABEAM 6 21.855192446643024 10.524564056306968 2008-Sep-22 22:13:21 INFO2 take_data: Starting WAPP+GALFA scan: 826600097 2008-Sep-22 22:13:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:13:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:13:22 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-Sep-22 22:13:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:13:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-22 22:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.682 (still bad) 2008-Sep-22 22:13:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:13:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:13:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:13:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8003.00 2008-Sep-22 22:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:13:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.677 (still bad) 2008-Sep-22 22:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.650 (still bad) 2008-Sep-22 22:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.648 (still bad) 2008-Sep-22 22:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.647 (still bad) 2008-Sep-22 22:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.643 (still bad) 2008-Sep-22 22:13:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:13:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:13:33 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-Sep-22 22:13:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:13:33 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Sep-22 22:13:33 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Sep-22 22:13:33 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Sep-22 22:13:33 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Sep-22 22:13:33 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:13:33 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:13:33 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:13:33 LOG2 antvel: Parameters to Doppler: Topocentric 94413 2008 266 0.0 2008-Sep-22 22:13:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:13:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Sep-22 22:13:33 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Sep-22 22:13:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:13:33 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:13:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-22 22:13:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:13:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:13:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:13:33 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Sep-22 22:13:33 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.929036 2008.7308037683474 18.999933 2008-Sep-22 22:13:33 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000005 10.463333333333335 2008-Sep-22 22:13:33 LOG4 log_alfabeam: ALFABEAM 1 21.849766883505158 10.569409675476795 2008-Sep-22 22:13:33 LOG4 log_alfabeam: ALFABEAM 2 21.844525778303947 10.509415112066916 2008-Sep-22 22:13:33 LOG4 log_alfabeam: ALFABEAM 3 21.844708675889493 10.403292246267698 2008-Sep-22 22:13:33 LOG4 log_alfabeam: ALFABEAM 4 21.850264090491368 10.357235152659564 2008-Sep-22 22:13:33 LOG4 log_alfabeam: ALFABEAM 5 21.855531500023215 10.418061605342190 2008-Sep-22 22:13:33 LOG4 log_alfabeam: ALFABEAM 6 21.855217201020828 10.524104793707524 2008-Sep-22 22:13:33 INFO2 take_data: Starting WAPP+GALFA scan: 826600098 2008-Sep-22 22:13:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:13:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:13:34 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Sep-22 22:13:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:13:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-22 22:13:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:13:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:13:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.646 (still bad) 2008-Sep-22 22:13:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8015.00 2008-Sep-22 22:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.646 (still bad) 2008-Sep-22 22:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.635 (still bad) 2008-Sep-22 22:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.635 (still bad) 2008-Sep-22 22:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.636 (still bad) 2008-Sep-22 22:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.640 (still bad) 2008-Sep-22 22:13:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:13:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:13:45 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Sep-22 22:13:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:13:45 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Sep-22 22:13:45 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Sep-22 22:13:45 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Sep-22 22:13:45 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Sep-22 22:13:45 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:13:45 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:13:45 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:13:45 LOG2 antvel: Parameters to Doppler: Topocentric 94425 2008 266 0.0 2008-Sep-22 22:13:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:13:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Sep-22 22:13:45 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Sep-22 22:13:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:13:45 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:13:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-22 22:13:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:13:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:13:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:13:45 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Sep-22 22:13:45 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.932378 2008.7308041486044 18.999933 2008-Sep-22 22:13:45 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000041 10.463333333333331 2008-Sep-22 22:13:45 LOG4 log_alfabeam: ALFABEAM 1 21.849809809483318 10.569428318847518 2008-Sep-22 22:13:45 LOG4 log_alfabeam: ALFABEAM 2 21.844544494840314 10.509895877923224 2008-Sep-22 22:13:45 LOG4 log_alfabeam: ALFABEAM 3 21.844684508831545 10.403758821992593 2008-Sep-22 22:13:45 LOG4 log_alfabeam: ALFABEAM 4 21.850221158458091 10.357213802063001 2008-Sep-22 22:13:45 LOG4 log_alfabeam: ALFABEAM 5 21.855513057672155 10.417575092442254 2008-Sep-22 22:13:45 LOG4 log_alfabeam: ALFABEAM 6 21.855241729879857 10.523644098385548 2008-Sep-22 22:13:45 INFO2 take_data: Starting WAPP+GALFA scan: 826600099 2008-Sep-22 22:13:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:13:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:13:46 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Sep-22 22:13:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:13:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-22 22:13:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:13:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:13:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:13:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8027.00 2008-Sep-22 22:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.642 (still bad) 2008-Sep-22 22:13:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:13:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:13:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:13:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:13:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:13:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:13:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:13:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:13:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.618 (still bad) 2008-Sep-22 22:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.615 (still bad) 2008-Sep-22 22:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.615 (still bad) 2008-Sep-22 22:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.617 (still bad) 2008-Sep-22 22:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.616 (still bad) 2008-Sep-22 22:13:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:13:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:13:57 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Sep-22 22:13:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:13:57 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Sep-22 22:13:57 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Sep-22 22:13:57 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Sep-22 22:13:57 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Sep-22 22:13:57 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:13:57 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:13:57 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:13:57 LOG2 antvel: Parameters to Doppler: Topocentric 94437 2008 266 0.0 2008-Sep-22 22:13:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:13:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Sep-22 22:13:57 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Sep-22 22:13:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:13:57 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:13:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-22 22:13:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:13:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:13:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:13:57 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Sep-22 22:13:57 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.935721 2008.7308045288617 18.999933 2008-Sep-22 22:13:57 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000012 10.463333333333340 2008-Sep-22 22:13:57 LOG4 log_alfabeam: ALFABEAM 1 21.849852680919433 10.569443166164168 2008-Sep-22 22:13:57 LOG4 log_alfabeam: ALFABEAM 2 21.844563377508177 10.510374297816238 2008-Sep-22 22:13:57 LOG4 log_alfabeam: ALFABEAM 3 21.844660565943169 10.404226835156464 2008-Sep-22 22:13:57 LOG4 log_alfabeam: ALFABEAM 4 21.850178278748064 10.357196255230164 2008-Sep-22 22:13:57 LOG4 log_alfabeam: ALFABEAM 5 21.855494444156335 10.417090883464519 2008-Sep-22 22:13:57 LOG4 log_alfabeam: ALFABEAM 6 21.855266038762409 10.523181891477320 2008-Sep-22 22:13:57 INFO2 take_data: Starting WAPP+GALFA scan: 826600100 2008-Sep-22 22:13:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:13:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:13:58 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Sep-22 22:13:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:13:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-22 22:13:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:13:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:13:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:13:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8039.00 2008-Sep-22 22:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.616 (still bad) 2008-Sep-22 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:14:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.574 (still bad) 2008-Sep-22 22:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.572 (still bad) 2008-Sep-22 22:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.572 (still bad) 2008-Sep-22 22:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.575 (still bad) 2008-Sep-22 22:14:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:14:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:14:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.469 1.284 1.277 1.234 2008-Sep-22 22:14:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.461 1.361 1.230 1.452 2008-Sep-22 22:14:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.264 1.305 1.573 1.435 2008-Sep-22 22:14:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.440 0.094 1.269 0.104 2008-Sep-22 22:14:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:14:09 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Sep-22 22:14:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:14:09 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Sep-22 22:14:09 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Sep-22 22:14:09 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Sep-22 22:14:09 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Sep-22 22:14:09 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:14:09 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73080 J 2008-Sep-22 22:14:09 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:14:09 LOG2 antvel: Parameters to Doppler: Topocentric 94449 2008 266 0.0 2008-Sep-22 22:14:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:14:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Sep-22 22:14:09 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Sep-22 22:14:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:14:09 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:14:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-22 22:14:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:14:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:14:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:14:09 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Sep-22 22:14:09 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.939063 2008.7308049091187 18.999933 2008-Sep-22 22:14:09 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000023 10.463333333333335 2008-Sep-22 22:14:09 LOG4 log_alfabeam: ALFABEAM 1 21.849895467611329 10.569454226913837 2008-Sep-22 22:14:09 LOG4 log_alfabeam: ALFABEAM 2 21.844582411993265 10.510850044126974 2008-Sep-22 22:14:09 LOG4 log_alfabeam: ALFABEAM 3 21.844636863056685 10.404695945067871 2008-Sep-22 22:14:09 LOG4 log_alfabeam: ALFABEAM 4 21.850135481582139 10.357182504854057 2008-Sep-22 22:14:09 LOG4 log_alfabeam: ALFABEAM 5 21.855475673594700 10.416609311002729 2008-Sep-22 22:14:09 LOG4 log_alfabeam: ALFABEAM 6 21.855290111514034 10.522718509280001 2008-Sep-22 22:14:09 INFO2 take_data: Starting WAPP+GALFA scan: 826600101 2008-Sep-22 22:14:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:14:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:14:10 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2008-Sep-22 22:14:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:14:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-22 22:14:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:14:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:14:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:14:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8051.00 2008-Sep-22 22:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.573 (still bad) 2008-Sep-22 22:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.563 (still bad) 2008-Sep-22 22:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.558 (still bad) 2008-Sep-22 22:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.561 (still bad) 2008-Sep-22 22:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.564 (still bad) 2008-Sep-22 22:14:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:14:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:14:21 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2008-Sep-22 22:14:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:14:21 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Sep-22 22:14:21 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Sep-22 22:14:21 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Sep-22 22:14:21 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Sep-22 22:14:21 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:14:21 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73081 J 2008-Sep-22 22:14:21 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:14:21 LOG2 antvel: Parameters to Doppler: Topocentric 94461 2008 266 0.0 2008-Sep-22 22:14:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:14:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Sep-22 22:14:21 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Sep-22 22:14:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:14:21 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:14:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-22 22:14:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:14:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-22 22:14:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-22 22:14:21 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Sep-22 22:14:21 LOG5 log_alfabeam: Parameters: 21.850000000000001 10.463333333333333 21.942406 2008.7308052893757 18.999933 2008-Sep-22 22:14:21 LOG4 log_alfabeam: ALFABEAM 0 21.850000000000026 10.463333333333335 2008-Sep-22 22:14:21 LOG4 log_alfabeam: ALFABEAM 1 21.849938190656665 10.569461527252416 2008-Sep-22 22:14:21 LOG4 log_alfabeam: ALFABEAM 2 21.844601606631588 10.511323361208916 2008-Sep-22 22:14:21 LOG4 log_alfabeam: ALFABEAM 3 21.844613387410302 10.405166371656055 2008-Sep-22 22:14:21 LOG4 log_alfabeam: ALFABEAM 4 21.850092745870278 10.357172523726330 2008-Sep-22 22:14:21 LOG4 log_alfabeam: ALFABEAM 5 21.855456737776933 10.416130128735517 2008-Sep-22 22:14:21 LOG4 log_alfabeam: ALFABEAM 6 21.855313961013270 10.522253734411887 2008-Sep-22 22:14:21 INFO2 take_data: Starting WAPP+GALFA scan: 826600102 2008-Sep-22 22:14:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-22 22:14:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-22 22:14:22 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Sep-22 22:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.562 (still bad) 2008-Sep-22 22:14:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:14:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-22 22:14:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:14:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:14:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:14:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8063.00 2008-Sep-22 22:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.562 (still bad) 2008-Sep-22 22:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.542 (still bad) 2008-Sep-22 22:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.544 (still bad) 2008-Sep-22 22:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.544 (still bad) 2008-Sep-22 22:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.546 (still bad) 2008-Sep-22 22:14:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:14:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-22 22:14:33 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Sep-22 22:14:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-22 22:14:33 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Sep-22 22:14:33 INFO2 smartfreq: Switching off CAL 2008-Sep-22 22:14:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 22:14:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 22:14:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:14:33 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Sep-22 22:14:33 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:14:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 22:14:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:14:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:14:33 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Sep-22 22:14:33 INFO3 restore_frequencies: Restoring original frequencies 2008-Sep-22 22:14:33 LOG5 antvel: Calling 'antvel 215100.000000 102748.000000 J 0' 2008-Sep-22 22:14:33 LOG2 antvel: Precessing RA = 21:51:00.0 Dec = +10:27:48.0 Epoch = 2008.73081 J 2008-Sep-22 22:14:33 LOG2 antvel: Computed apparent RA = 21:51:27.4 Dec = +10:30:26.2 2008-Sep-22 22:14:33 LOG2 antvel: Parameters to Doppler: Topocentric 94473 2008 266 0.0 2008-Sep-22 22:14:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:14:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Sep-22 22:14:33 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Sep-22 22:14:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:14:33 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:14:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-22 22:14:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:14:33 STOP finish_task: Finishing task 'smart frequency switching' 2008-Sep-22 22:14:33 LOG5 finish_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Sep-22 22:14:33 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Sep-22 22:14:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:14:33 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Sep-22 22:14:33 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Sep-22 22:14:33 NOTE run_command_file: DONE with command file processing 2008-Sep-22 22:14:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Sep-22 22:14:34 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Sep-22 22:14:34 LOG5 finish_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Sep-22 22:14:34 DONE finish_task: DONE finished running: command file 'command_galfasrc' 2008-Sep-22 22:14:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:14:34 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'OK' 2008-Sep-22 22:14:34 LOG5 end_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Sep-22 22:14:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-22 22:14:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:14:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:14:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.546 (still bad) 2008-Sep-22 22:14:45 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Sep-22 22:14:45 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Sep-22 22:14:45 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Sep-22 22:14:45 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Sep-22 22:14:45 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2008-Sep-22 22:14:45 NOTE restart_wapp: Restarting all WAPPs 2008-Sep-22 22:14:45 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Sep-22 22:14:45 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Sep-22 22:14:45 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2008-Sep-22 22:14:45 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Sep-22 22:14:45 LOG3 exec_msg: Closing socket 2008-Sep-22 22:14:45 LOG3 exec_msg: Closing socket 2008-Sep-22 22:14:45 LOG3 exec_msg: Closing socket 2008-Sep-22 22:14:45 LOG3 exec_msg: Closing socket 2008-Sep-22 22:14:47 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Sep-22 22:14:47 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Sep-22 22:14:47 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Sep-22 22:14:47 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Sep-22 22:14:56 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Sep-22 22:14:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Sep-22 22:14:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Sep-22 22:14:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Sep-22 22:14:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Sep-22 22:14:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Sep-22 22:14:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Sep-22 22:14:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Sep-22 22:14:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Sep-22 22:14:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Sep-22 22:14:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Sep-22 22:14:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Sep-22 22:14:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Sep-22 22:14:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Sep-22 22:14:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Sep-22 22:14:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Sep-22 22:14:59 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Sep-22 22:14:59 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Sep-22 22:14:59 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Sep-22 22:14:59 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Sep-22 22:14:59 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Sep-22 22:14:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Sep-22 22:14:59 LOG1 config_iflo: Receiver ALFA already selected 2008-Sep-22 22:14:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:14:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:14:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:14:59 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Sep-22 22:14:59 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:14:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:14:59 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Sep-22 22:14:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:14:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:14:59 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Sep-22 22:14:59 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Sep-22 22:14:59 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Sep-22 22:14:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Sep-22 22:14:59 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Sep-22 22:14:59 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Sep-22 22:14:59 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Sep-22 22:14:59 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Sep-22 22:14:59 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Sep-22 22:14:59 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Sep-22 22:14:59 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Sep-22 22:14:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Sep-22 22:14:59 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Sep-22 22:14:59 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Sep-22 22:14:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Sep-22 22:14:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:14:59 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Sep-22 22:14:59 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Sep-22 22:14:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-22 22:14:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Sep-22 22:14:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:14:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:14:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:14:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:14:59 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Sep-22 22:14:59 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Sep-22 22:14:59 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Sep-22 22:14:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Sep-22 22:14:59 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Sep-22 22:14:59 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Sep-22 22:14:59 DONE finish_task: DONE finished configuration: IF/LO path 2008-Sep-22 22:15:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:15:00 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Sep-22 22:15:00 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Sep-22 22:15:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Sep-22 22:15:00 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Sep-22 22:15:00 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Sep-22 22:15:00 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Sep-22 22:15:00 LOG5 begin_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Sep-22 22:15:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Sep-22 22:15:00 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Sep-22 22:15:00 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Sep-22 22:15:00 START begin_task: Starting task 'selecting calibration port' 2008-Sep-22 22:15:00 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Sep-22 22:15:00 LOG3 vw_send: To DATATAKING: calport 3 2008-Sep-22 22:15:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Sep-22 22:15:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:15:00 START begin_task: Starting task 'waiting on calport' 2008-Sep-22 22:15:00 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Sep-22 22:15:00 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Sep-22 22:15:00 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Sep-22 22:15:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:15:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:15:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:15:01 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Sep-22 22:15:01 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Sep-22 22:15:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Sep-22 22:15:01 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Sep-22 22:15:01 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Sep-22 22:15:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 22:15:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 22:15:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:15:01 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Sep-22 22:15:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:15:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:15:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 22:15:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:15:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:15:01 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Sep-22 22:15:01 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Sep-22 22:15:01 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Sep-22 22:15:01 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Sep-22 22:15:01 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Sep-22 22:15:01 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Sep-22 22:15:01 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Sep-22 22:15:01 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Sep-22 22:15:01 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Sep-22 22:15:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 22:15:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 22:15:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 22:15:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 22:15:01 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Sep-22 22:15:01 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Sep-22 22:15:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:15:01 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Sep-22 22:15:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Sep-22 22:15:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Sep-22 22:15:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:15:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 22:15:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 22:15:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:15:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:15:01 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Sep-22 22:15:01 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Sep-22 22:15:01 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Sep-22 22:15:01 LOG5 finish_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Sep-22 22:15:01 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Sep-22 22:15:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:15:01 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Sep-22 22:15:01 LOG5 end_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Sep-22 22:15:01 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Sep-22 22:15:01 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Sep-22 22:15:01 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Sep-22 22:15:01 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Sep-22 22:15:01 LOG5 begin_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Sep-22 22:15:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Sep-22 22:15:01 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Sep-22 22:15:01 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Sep-22 22:15:02 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Sep-22 22:15:02 LOG5 finish_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Sep-22 22:15:02 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Sep-22 22:15:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:15:02 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Sep-22 22:15:02 LOG5 end_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Sep-22 22:15:02 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Sep-22 22:15:02 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Sep-22 22:15:03 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Sep-22 22:15:19 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Sep-22 22:15:19 LOG4 exec_msg: From OBSERVER: track_new_source galfasrc 215800.0 +102748 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Sep-22 22:15:19 LOG1 track_new_source: Calling 'track_new_source galfasrc 215800.0 +102748 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Sep-22 22:15:19 BEGIN begin_task: Starting task 'selecting new source' 2008-Sep-22 22:15:19 LOG5 begin_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2008-Sep-22 22:15:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Selecting source 'galfasrc' ...} 2008-Sep-22 22:15:19 LOG3 track_source: Calling 'track_source galfasrc 215800.0 +102748 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Sep-22 22:15:19 START begin_task: Starting task 'sending tracking commands' 2008-Sep-22 22:15:19 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Sep-22 22:15:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Sep-22 22:15:19 INFO1 track_source: Starting to track galfasrc 2008-Sep-22 22:15:19 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Sep-22 22:15:19 LOG3 vw_send: To DATATAKING: set ra 215800.0 2008-Sep-22 22:15:19 LOG3 vw_send: To DATATAKING: set dec +102748 2008-Sep-22 22:15:19 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Sep-22 22:15:19 LOG3 vw_send: To DATATAKING: pnt tr 215800.0 +102748 -CJ 2008-Sep-22 22:15:19 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Sep-22 22:15:19 STOP finish_task: Finishing task 'sending tracking commands' 2008-Sep-22 22:15:19 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Sep-22 22:15:19 INFO2 finish_task: DONE finished sending: tracking commands 2008-Sep-22 22:15:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:15:19 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Sep-22 22:15:19 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Sep-22 22:15:19 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Sep-22 22:15:19 START begin_task: Starting task 'applying pointing corrections' 2008-Sep-22 22:15:19 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Sep-22 22:15:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Sep-22 22:15:19 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Sep-22 22:15:19 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Sep-22 22:15:19 LOG5 finish_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Sep-22 22:15:19 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Sep-22 22:15:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:15:19 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Sep-22 22:15:19 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Sep-22 22:15:19 STOP finish_task: Finishing task 'selecting new source' 2008-Sep-22 22:15:19 LOG5 finish_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2008-Sep-22 22:15:19 DONE finish_task: DONE finished selecting: new source 2008-Sep-22 22:15:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:15:19 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Sep-22 22:15:19 LOG5 end_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2008-Sep-22 22:15:19 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Sep-22 22:15:19 LOG4 got_cormsg: From DATATAKING: set ra 215800.0 2008-Sep-22 22:15:19 LOG4 got_cormsg: From DATATAKING: set dec +102748 2008-Sep-22 22:15:19 LOG4 got_cormsg: From DATATAKING: vw% 215800.0 2008-Sep-22 22:15:19 LOG4 got_cormsg: From DATATAKING: vw% +102748 2008-Sep-22 22:15:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:15:19 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Sep-22 22:15:19 LOG4 got_cormsg: From DATATAKING: pnt tr 215800.0 +102748 -CJ 2008-Sep-22 22:15:19 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Sep-22 22:15:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Sep-22 22:15:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:15:19 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Sep-22 22:15:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:15:22 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Sep-22 22:15:22 LOG4 exec_msg: From OBSERVER: track_new_source galfasrc 215800.0 +102748 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Sep-22 22:15:22 LOG1 track_new_source: Calling 'track_new_source galfasrc 215800.0 +102748 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Sep-22 22:15:22 BEGIN begin_task: Starting task 'selecting new source' 2008-Sep-22 22:15:22 LOG5 begin_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2008-Sep-22 22:15:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Selecting source 'galfasrc' ...} 2008-Sep-22 22:15:22 LOG3 track_source: Calling 'track_source galfasrc 215800.0 +102748 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Sep-22 22:15:22 START begin_task: Starting task 'sending tracking commands' 2008-Sep-22 22:15:22 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Sep-22 22:15:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Sep-22 22:15:22 INFO1 track_source: Starting to track galfasrc 2008-Sep-22 22:15:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Sep-22 22:15:22 LOG3 vw_send: To DATATAKING: set ra 215800.0 2008-Sep-22 22:15:22 LOG3 vw_send: To DATATAKING: set dec +102748 2008-Sep-22 22:15:22 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Sep-22 22:15:22 LOG3 vw_send: To DATATAKING: pnt tr 215800.0 +102748 -CJ 2008-Sep-22 22:15:22 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Sep-22 22:15:22 STOP finish_task: Finishing task 'sending tracking commands' 2008-Sep-22 22:15:22 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Sep-22 22:15:22 INFO2 finish_task: DONE finished sending: tracking commands 2008-Sep-22 22:15:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:15:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Sep-22 22:15:22 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Sep-22 22:15:22 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Sep-22 22:15:22 START begin_task: Starting task 'applying pointing corrections' 2008-Sep-22 22:15:22 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2008-Sep-22 22:15:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Sep-22 22:15:22 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Sep-22 22:15:22 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Sep-22 22:15:22 LOG5 finish_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2008-Sep-22 22:15:22 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Sep-22 22:15:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:15:22 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Sep-22 22:15:22 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2008-Sep-22 22:15:22 STOP finish_task: Finishing task 'selecting new source' 2008-Sep-22 22:15:22 LOG5 finish_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2008-Sep-22 22:15:22 DONE finish_task: DONE finished selecting: new source 2008-Sep-22 22:15:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:15:22 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Sep-22 22:15:22 LOG5 end_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2008-Sep-22 22:15:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Sep-22 22:15:22 LOG4 got_cormsg: From DATATAKING: set ra 215800.0 2008-Sep-22 22:15:22 LOG4 got_cormsg: From DATATAKING: set dec +102748 2008-Sep-22 22:15:22 LOG4 got_cormsg: From DATATAKING: vw% 215800.0 2008-Sep-22 22:15:22 LOG4 got_cormsg: From DATATAKING: vw% +102748 2008-Sep-22 22:15:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:15:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Sep-22 22:15:22 LOG4 got_cormsg: From DATATAKING: pnt tr 215800.0 +102748 -CJ 2008-Sep-22 22:15:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Sep-22 22:15:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Sep-22 22:15:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:15:22 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Sep-22 22:15:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:15:35 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Sep-22 22:15:35 LOG4 exec_msg: From OBSERVER: track_new_source drift43p2 215800.0 +102748 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Sep-22 22:15:35 LOG1 track_new_source: Calling 'track_new_source drift43p2 215800.0 +102748 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Sep-22 22:15:35 BEGIN begin_task: Starting task 'selecting new source' 2008-Sep-22 22:15:35 LOG5 begin_task: Level: (1) ID = <10119> Status = 0 0 0 0 ok 2008-Sep-22 22:15:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift43p2} INFO {Selecting source 'drift43p2' ...} 2008-Sep-22 22:15:35 LOG3 track_source: Calling 'track_source drift43p2 215800.0 +102748 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Sep-22 22:15:35 START begin_task: Starting task 'sending tracking commands' 2008-Sep-22 22:15:35 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Sep-22 22:15:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift43p2} INFO {Slewing to source 'drift43p2' ...} 2008-Sep-22 22:15:35 INFO1 track_source: Starting to track drift43p2 2008-Sep-22 22:15:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift43p2" 2008-Sep-22 22:15:35 LOG3 vw_send: To DATATAKING: set ra 215800.0 2008-Sep-22 22:15:35 LOG3 vw_send: To DATATAKING: set dec +102748 2008-Sep-22 22:15:35 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Sep-22 22:15:35 LOG3 vw_send: To DATATAKING: pnt tr 215800.0 +102748 -CJ 2008-Sep-22 22:15:35 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Sep-22 22:15:35 STOP finish_task: Finishing task 'sending tracking commands' 2008-Sep-22 22:15:35 LOG5 finish_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Sep-22 22:15:35 INFO2 finish_task: DONE finished sending: tracking commands 2008-Sep-22 22:15:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:15:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Sep-22 22:15:35 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Sep-22 22:15:35 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Sep-22 22:15:35 START begin_task: Starting task 'applying pointing corrections' 2008-Sep-22 22:15:35 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Sep-22 22:15:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Sep-22 22:15:35 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Sep-22 22:15:35 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Sep-22 22:15:35 LOG5 finish_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Sep-22 22:15:35 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Sep-22 22:15:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:15:35 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Sep-22 22:15:35 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Sep-22 22:15:35 STOP finish_task: Finishing task 'selecting new source' 2008-Sep-22 22:15:35 LOG5 finish_task: Level: (1) ID = <10119> Status = 0 0 0 0 ok 2008-Sep-22 22:15:35 DONE finish_task: DONE finished selecting: new source 2008-Sep-22 22:15:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:15:35 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Sep-22 22:15:35 LOG5 end_task: Level: (1) ID = <10119> Status = 0 0 0 0 ok 2008-Sep-22 22:15:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift43p2" 2008-Sep-22 22:15:35 LOG4 got_cormsg: From DATATAKING: set ra 215800.0 2008-Sep-22 22:15:35 LOG4 got_cormsg: From DATATAKING: set dec +102748 2008-Sep-22 22:15:35 LOG4 got_cormsg: From DATATAKING: vw% 215800.0 2008-Sep-22 22:15:35 LOG4 got_cormsg: From DATATAKING: vw% +102748 2008-Sep-22 22:15:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:15:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Sep-22 22:15:35 LOG4 got_cormsg: From DATATAKING: pnt tr 215800.0 +102748 -CJ 2008-Sep-22 22:15:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Sep-22 22:15:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Sep-22 22:15:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:15:35 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Sep-22 22:15:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:16:01 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Sep-22 22:16:01 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Sep-22 22:16:01 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Sep-22 22:16:01 LOG5 begin_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2008-Sep-22 22:16:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Sep-22 22:16:01 INFO2 adjust_power: Starting to adjust WAPP power 2008-Sep-22 22:16:01 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Sep-22 22:16:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Sep-22 22:16:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:16:01 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Sep-22 22:16:01 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Sep-22 22:16:01 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Sep-22 22:16:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:16:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:16:04 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:16:04 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Sep-22 22:16:04 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Sep-22 22:16:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Sep-22 22:16:04 START begin_task: Starting task 'adjusting WAPP power' 2008-Sep-22 22:16:04 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Sep-22 22:16:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Sep-22 22:16:04 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-22 22:16:04 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-22 22:16:04 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-22 22:16:04 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-22 22:16:04 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Sep-22 22:16:04 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Sep-22 22:16:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Sep-22 22:16:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:16:04 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Sep-22 22:16:04 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 4 dB 2008-Sep-22 22:16:04 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2008-Sep-22 22:16:04 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Sep-22 22:16:04 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Sep-22 22:16:04 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Sep-22 22:16:04 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Sep-22 22:16:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.060 0.949 ALFA beam 1: 0.940 0.912 2008-Sep-22 22:16:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.058 0.970 ALFA beam 3: 1.090 1.034 2008-Sep-22 22:16:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.890 0.911 ALFA beam 5: 1.135 1.078 2008-Sep-22 22:16:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.006 0.091 ALFA beam 7: 0.895 0.101 2008-Sep-22 22:16:04 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Sep-22 22:16:04 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Sep-22 22:16:04 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Sep-22 22:16:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:16:05 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Sep-22 22:16:05 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Sep-22 22:16:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Sep-22 22:16:05 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Sep-22 22:16:05 LOG5 finish_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2008-Sep-22 22:16:05 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Sep-22 22:16:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-22 22:16:05 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Sep-22 22:16:05 LOG5 end_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2008-Sep-22 22:16:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.091 < 0.75)! 2008-Sep-22 22:16:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.949 0.940 0.912 2008-Sep-22 22:16:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.058 0.970 1.090 1.034 2008-Sep-22 22:16:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.890 0.911 1.135 1.078 2008-Sep-22 22:16:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.091 0.895 0.101 2008-Sep-22 22:16:08 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Sep-22 22:16:08 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift43p2 215700.0 +102748 J 0 Topocentric velocity(optical) 2008-Sep-22 22:16:08 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift43p2 215700.0 +102748 J 0 Topocentric velocity(optical)' 2008-Sep-22 22:16:08 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Sep-22 22:16:08 LOG5 begin_task: Level: (1) ID = <10126> Status = 0 0 0 0 ok 2008-Sep-22 22:16:08 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift43p2' 2008-Sep-22 22:16:08 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Sep-22 22:16:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift43p2} 2008-Sep-22 22:16:08 INFO5 fixed_driftmap: Start: year = 2008.730808680001 RA = 21:57:27.4 Dec = +10:30:28.7 2008-Sep-22 22:16:08 NOTE fixed_driftmap: Setting ZA to 7:50:45.0 ... 2008-Sep-22 22:16:09 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 7.85 2008-Sep-22 22:16:09 LOG3 track_source: Calling 'track_source drift43p2 360.0 7.8458271145 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Sep-22 22:16:09 START begin_task: Starting task 'sending tracking commands' 2008-Sep-22 22:16:09 LOG5 begin_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2008-Sep-22 22:16:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift43p2} INFO {Slewing to source 'drift43p2' ...} 2008-Sep-22 22:16:09 INFO1 track_source: Starting to track drift43p2 2008-Sep-22 22:16:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift43p2" 2008-Sep-22 22:16:09 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Sep-22 22:16:09 LOG3 vw_send: To DATATAKING: set dec 7.8458271145 2008-Sep-22 22:16:09 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Sep-22 22:16:09 LOG3 vw_send: To DATATAKING: pnt tr 360.0 7.8458271145 -CF 2008-Sep-22 22:16:09 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Sep-22 22:16:09 STOP finish_task: Finishing task 'sending tracking commands' 2008-Sep-22 22:16:09 LOG5 finish_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2008-Sep-22 22:16:09 INFO2 finish_task: DONE finished sending: tracking commands 2008-Sep-22 22:16:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:16:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Sep-22 22:16:09 LOG5 end_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2008-Sep-22 22:16:09 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Sep-22 22:16:09 LOG5 begin_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2008-Sep-22 22:16:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Sep-22 22:16:09 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Sep-22 22:16:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Sep-22 22:16:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Sep-22 22:16:09 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Sep-22 22:16:09 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Sep-22 22:16:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift43p2" 2008-Sep-22 22:16:09 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Sep-22 22:16:09 LOG4 got_cormsg: From DATATAKING: set dec 7.8458271145 2008-Sep-22 22:16:09 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Sep-22 22:16:09 LOG4 got_cormsg: From DATATAKING: vw% 7.8458271145 2008-Sep-22 22:16:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:16:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Sep-22 22:16:09 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 7.8458271145 -CF 2008-Sep-22 22:16:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Sep-22 22:16:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Sep-22 22:16:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:16:10 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Sep-22 22:16:10 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Sep-22 22:16:10 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Sep-22 22:16:10 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Sep-22 22:16:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Sep-22 22:16:10 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Sep-22 22:16:10 LOG5 finish_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2008-Sep-22 22:16:10 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Sep-22 22:16:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:16:10 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Sep-22 22:16:10 LOG5 end_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2008-Sep-22 22:16:10 START begin_task: Starting task 'waiting on telescope' 2008-Sep-22 22:16:10 LOG5 begin_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-Sep-22 22:16:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Sep-22 22:16:10 LOG3 waittrk: Start waittrk 5 2008-Sep-22 22:16:10 START begin_task: Starting task 'waiting on telescope movement' 2008-Sep-22 22:16:10 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Sep-22 22:16:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Sep-22 22:16:15 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Sep-22 22:16:15 START begin_task: Starting task 'waiting on telescope on source' 2008-Sep-22 22:16:15 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Sep-22 22:16:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Sep-22 22:16:19 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Sep-22 22:16:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Sep-22 22:16:19 INFO2 waittrk: Now tracking drift43p2 2008-Sep-22 22:16:19 LOG4 waittrk: Current telescope position: Az = 359.62 ZA = 7.81 2008-Sep-22 22:16:19 STOP finish_task: Finishing task 'waiting on telescope' 2008-Sep-22 22:16:19 LOG5 finish_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-Sep-22 22:16:19 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Sep-22 22:16:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:16:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Sep-22 22:16:19 LOG5 end_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-Sep-22 22:16:19 START begin_task: Starting task 'selecting calibration type' 2008-Sep-22 22:16:19 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Sep-22 22:16:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-22 22:16:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-22 22:16:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:16:19 START begin_task: Starting task 'waiting on setcal' 2008-Sep-22 22:16:19 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Sep-22 22:16:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-22 22:16:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:16:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:16:19 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:16:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-22 22:16:19 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Sep-22 22:16:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-22 22:16:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:16:19 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-22 22:16:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:16:19 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Sep-22 22:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:16:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:16:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:16:20 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Sep-22 22:16:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:16:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-22 22:16:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:16:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:16:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:16:20 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Sep-22 22:16:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:16:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:16:20 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Sep-22 22:16:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:16:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:16:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-22 22:16:20 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Sep-22 22:16:20 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Sep-22 22:16:20 INFO3 dopset_later: Setting Doppler correction now 2008-Sep-22 22:16:20 LOG5 antvel: Calling 'antvel 360.000000 7.845827 F 0' 2008-Sep-22 22:16:20 LOG2 antvel: Transforming current Az = 360.00 ZA = 7.85 to apparent RA = 21:58:31.0 Dec = +10:30:28.7 2008-Sep-22 22:16:20 LOG2 antvel: Parameters to Doppler: Topocentric 94579 2008 266 0.0 2008-Sep-22 22:16:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-22 22:16:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Sep-22 22:16:20 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Sep-22 22:16:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-22 22:16:20 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-22 22:16:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-22 22:16:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:16:20 START begin_task: Starting task 'adjusting WAPP power' 2008-Sep-22 22:16:20 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Sep-22 22:16:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Sep-22 22:16:20 INFO2 adjust_power: Starting to adjust WAPP power 2008-Sep-22 22:16:20 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Sep-22 22:16:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Sep-22 22:16:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:16:20 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Sep-22 22:16:20 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Sep-22 22:16:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-22 22:16:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-22 22:16:20 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Sep-22 22:16:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:16:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:16:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:16:23 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Sep-22 22:16:23 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Sep-22 22:16:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Sep-22 22:16:23 START begin_task: Starting task 'adjusting WAPP power' 2008-Sep-22 22:16:23 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Sep-22 22:16:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Sep-22 22:16:23 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-22 22:16:23 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-22 22:16:23 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-22 22:16:23 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-22 22:16:23 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Sep-22 22:16:23 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2008-Sep-22 22:16:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Sep-22 22:16:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:16:24 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Sep-22 22:16:24 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 4 dB 2008-Sep-22 22:16:24 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2008-Sep-22 22:16:24 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Sep-22 22:16:24 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Sep-22 22:16:24 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Sep-22 22:16:24 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2008-Sep-22 22:16:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.061 0.954 ALFA beam 1: 0.945 0.917 2008-Sep-22 22:16:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.065 0.986 ALFA beam 3: 1.111 1.060 2008-Sep-22 22:16:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.906 0.930 ALFA beam 5: 0.905 1.079 2008-Sep-22 22:16:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.024 0.093 ALFA beam 7: 0.902 0.103 2008-Sep-22 22:16:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Sep-22 22:16:24 LOG5 finish_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Sep-22 22:16:24 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Sep-22 22:16:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:16:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Sep-22 22:16:24 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Sep-22 22:16:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-22 22:16:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Sep-22 22:16:24 LOG5 finish_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Sep-22 22:16:24 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Sep-22 22:16:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:16:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Sep-22 22:16:24 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Sep-22 22:16:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 22:16:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 22:16:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 22:16:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 22:16:24 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:57:27.4 LST = 21:58:35.0 diff = -67.6 secs 2008-Sep-22 22:16:24 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Sep-22 22:16:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Sep-22 22:16:24 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Sep-22 22:16:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-22 22:16:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-22 22:16:24 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-22 22:16:24 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 22:16:24 LOG5 begin_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2008-Sep-22 22:16:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 22:16:24 INFO2 take_data: Starting WAPP scan: 826600103 2008-Sep-22 22:16:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-22 22:16:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 22:16:25 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-Sep-22 22:16:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 22:16:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20080922.a2010.0023.fits 2008-Sep-22 22:16:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:16:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080922.a2010.0023.fits} 2008-Sep-22 22:16:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8186.00 2008-Sep-22 22:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:17:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:17:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.948 0.940 0.912 2008-Sep-22 22:17:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.990 1.113 1.060 2008-Sep-22 22:17:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.907 0.933 0.906 1.077 2008-Sep-22 22:17:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.093 0.900 0.103 2008-Sep-22 22:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:18:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:18:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 0.951 0.938 0.910 2008-Sep-22 22:18:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.988 1.115 1.061 2008-Sep-22 22:18:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 0.936 0.902 1.078 2008-Sep-22 22:18:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.093 0.937 0.103 2008-Sep-22 22:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.110 (still bad) 2008-Sep-22 22:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.110 (still bad) 2008-Sep-22 22:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.110 (still bad) 2008-Sep-22 22:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.109 (still bad) 2008-Sep-22 22:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.108 (still bad) 2008-Sep-22 22:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.110 (still bad) 2008-Sep-22 22:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.110 (still bad) 2008-Sep-22 22:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.109 (still bad) 2008-Sep-22 22:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.125 (still bad) 2008-Sep-22 22:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.127 (still bad) 2008-Sep-22 22:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.138 (still bad) 2008-Sep-22 22:19:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:19:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.954 0.946 0.920 2008-Sep-22 22:19:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.003 1.111 1.061 2008-Sep-22 22:19:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.907 0.940 0.970 1.157 2008-Sep-22 22:19:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.094 0.899 0.103 2008-Sep-22 22:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.168 (still bad) 2008-Sep-22 22:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.170 (still bad) 2008-Sep-22 22:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.148 (still bad) 2008-Sep-22 22:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.128 (still bad) 2008-Sep-22 22:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.111 (still bad) 2008-Sep-22 22:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.112 (still bad) 2008-Sep-22 22:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.110 (still bad) 2008-Sep-22 22:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.111 (still bad) 2008-Sep-22 22:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 22:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-22 22:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.168 (still bad) 2008-Sep-22 22:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.202 (still bad) 2008-Sep-22 22:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.238 (still bad) 2008-Sep-22 22:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.269 (still bad) 2008-Sep-22 22:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.285 (still bad) 2008-Sep-22 22:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.282 (still bad) 2008-Sep-22 22:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.258 (still bad) 2008-Sep-22 22:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.221 (still bad) 2008-Sep-22 22:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.179 (still bad) 2008-Sep-22 22:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.144 (still bad) 2008-Sep-22 22:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.124 (still bad) 2008-Sep-22 22:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 22:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-22 22:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.137 (still bad) 2008-Sep-22 22:20:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:20:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 0.953 0.940 0.910 2008-Sep-22 22:20:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.995 1.134 1.081 2008-Sep-22 22:20:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 0.938 0.914 1.095 2008-Sep-22 22:20:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.093 0.900 0.103 2008-Sep-22 22:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.124 (still bad) 2008-Sep-22 22:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.112 (still bad) 2008-Sep-22 22:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.113 (still bad) 2008-Sep-22 22:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.113 (still bad) 2008-Sep-22 22:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.113 (still bad) 2008-Sep-22 22:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.110 (still bad) 2008-Sep-22 22:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.110 (still bad) 2008-Sep-22 22:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.108 (still bad) 2008-Sep-22 22:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.109 (still bad) 2008-Sep-22 22:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.108 (still bad) 2008-Sep-22 22:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.108 (still bad) 2008-Sep-22 22:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.107 (still bad) 2008-Sep-22 22:21:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:21:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.064 0.957 0.938 0.913 2008-Sep-22 22:21:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 1.001 1.108 1.062 2008-Sep-22 22:21:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.906 0.941 0.902 1.079 2008-Sep-22 22:21:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.093 0.900 0.103 2008-Sep-22 22:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.110 (still bad) 2008-Sep-22 22:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.108 (still bad) 2008-Sep-22 22:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.108 (still bad) 2008-Sep-22 22:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.107 (still bad) 2008-Sep-22 22:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.108 (still bad) 2008-Sep-22 22:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.109 (still bad) 2008-Sep-22 22:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.108 (still bad) 2008-Sep-22 22:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.108 (still bad) 2008-Sep-22 22:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.109 (still bad) 2008-Sep-22 22:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.109 (still bad) 2008-Sep-22 22:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.109 (still bad) 2008-Sep-22 22:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.109 (still bad) 2008-Sep-22 22:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.109 (still bad) 2008-Sep-22 22:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.109 (still bad) 2008-Sep-22 22:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.109 (still bad) 2008-Sep-22 22:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.109 (still bad) 2008-Sep-22 22:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.108 (still bad) 2008-Sep-22 22:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.108 (still bad) 2008-Sep-22 22:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.107 (still bad) 2008-Sep-22 22:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.108 (still bad) 2008-Sep-22 22:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.107 (still bad) 2008-Sep-22 22:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.108 (still bad) 2008-Sep-22 22:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.109 (still bad) 2008-Sep-22 22:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.108 (still bad) 2008-Sep-22 22:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.109 (still bad) 2008-Sep-22 22:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.109 (still bad) 2008-Sep-22 22:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.108 (still bad) 2008-Sep-22 22:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.108 (still bad) 2008-Sep-22 22:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.110 (still bad) 2008-Sep-22 22:22:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:22:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 0.958 0.940 0.913 2008-Sep-22 22:22:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.996 1.109 1.062 2008-Sep-22 22:22:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.909 0.941 0.906 1.079 2008-Sep-22 22:22:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.094 0.902 0.103 2008-Sep-22 22:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.109 (still bad) 2008-Sep-22 22:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.111 (still bad) 2008-Sep-22 22:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.110 (still bad) 2008-Sep-22 22:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.111 (still bad) 2008-Sep-22 22:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.109 (still bad) 2008-Sep-22 22:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.111 (still bad) 2008-Sep-22 22:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.109 (still bad) 2008-Sep-22 22:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:22:35 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:22:35.303 (seconds: 80555.303)!} 2008-Sep-22 22:22:35 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:22:35.303 (seconds: 80555.303)! 2008-Sep-22 22:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:22:36 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 80554.0 to 80555.0! 2008-Sep-22 22:22:37 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (80554.0 - 80556.0)! 2008-Sep-22 22:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.110 (still bad) 2008-Sep-22 22:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:23:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:23:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 0.955 0.941 0.911 2008-Sep-22 22:23:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.997 1.113 1.064 2008-Sep-22 22:23:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.907 0.938 0.906 1.079 2008-Sep-22 22:23:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.093 0.905 0.103 2008-Sep-22 22:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.110 (still bad) 2008-Sep-22 22:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:24:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:24:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.064 0.958 0.944 0.916 2008-Sep-22 22:24:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.999 1.112 1.061 2008-Sep-22 22:24:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.909 0.939 0.905 1.081 2008-Sep-22 22:24:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.093 0.902 0.103 2008-Sep-22 22:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.112 (still bad) 2008-Sep-22 22:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:25:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:25:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 0.954 0.942 0.915 2008-Sep-22 22:25:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.996 1.113 1.063 2008-Sep-22 22:25:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.942 0.908 1.081 2008-Sep-22 22:25:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.093 0.903 0.103 2008-Sep-22 22:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.111 (still bad) 2008-Sep-22 22:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:26:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:26:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 0.954 0.942 0.914 2008-Sep-22 22:26:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.998 1.117 1.062 2008-Sep-22 22:26:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.933 0.907 1.078 2008-Sep-22 22:26:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.093 0.903 0.103 2008-Sep-22 22:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:26:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:26:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 22:26:26 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-Sep-22 22:26:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 22:26:26 LOG5 end_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2008-Sep-22 22:26:26 LOG1 fixed_driftmap: New position: year = 2008.7308282632393 RA = 22:08:12.8 RA/Dec = 22:08:40.3 +10:30:33.2 2008-Sep-22 22:26:26 NOTE fixed_driftmap: Correcting ZA to 7:50:40.5 ... 2008-Sep-22 22:26:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8445866754 -CF 2008-Sep-22 22:26:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-22 22:26:26 START begin_task: Starting task 'WAPP calibration' 2008-Sep-22 22:26:26 LOG5 begin_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2008-Sep-22 22:26:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-22 22:26:26 START begin_task: Starting task 'selecting calibration type' 2008-Sep-22 22:26:26 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Sep-22 22:26:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-22 22:26:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-22 22:26:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:26:26 START begin_task: Starting task 'waiting on setcal' 2008-Sep-22 22:26:26 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2008-Sep-22 22:26:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8445866754 -CF 2008-Sep-22 22:26:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:26:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-22 22:26:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:26:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:26:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:26:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-22 22:26:26 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2008-Sep-22 22:26:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-22 22:26:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:26:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-22 22:26:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:26:26 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Sep-22 22:26:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:26:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:26:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:26:27 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Sep-22 22:26:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:26:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-22 22:26:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:26:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:26:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:26:27 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Sep-22 22:26:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:26:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:26:27 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Sep-22 22:26:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:26:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:26:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-22 22:26:27 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Sep-22 22:26:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-22 22:26:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-22 22:26:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-22 22:26:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:26:27 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Sep-22 22:26:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:26:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-22 22:26:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:26:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:26:27 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Sep-22 22:26:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-22 22:26:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-22 22:26:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 22:26:27 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Sep-22 22:26:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 22:26:27 INFO2 take_data: Starting WAPP scan: 826600104 2008-Sep-22 22:26:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-22 22:26:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 22:26:27 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Sep-22 22:26:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:26:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8788.00 2008-Sep-22 22:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:26:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:26:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 22:26:29 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Sep-22 22:26:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 22:26:29 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Sep-22 22:26:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-22 22:26:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 22:26:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 22:26:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:26:29 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Sep-22 22:26:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:26:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 22:26:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:26:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:26:30 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Sep-22 22:26:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-22 22:26:30 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-22 22:26:30 LOG5 finish_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2008-Sep-22 22:26:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-22 22:26:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:26:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-22 22:26:30 LOG5 end_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2008-Sep-22 22:26:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Sep-22 22:26:30 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Sep-22 22:26:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 22:26:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 22:26:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 22:26:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 22:26:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-22 22:26:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-22 22:26:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-22 22:26:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 22:26:30 LOG5 begin_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2008-Sep-22 22:26:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 22:26:30 INFO2 take_data: Starting WAPP scan: 826600105 2008-Sep-22 22:26:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-22 22:26:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 22:26:30 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Sep-22 22:26:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 22:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.546 (still bad) 2008-Sep-22 22:26:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:26:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8791.00 2008-Sep-22 22:26:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20080922.a2010.0024.fits 2008-Sep-22 22:26:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080922.a2010.0024.fits} 2008-Sep-22 22:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.546 (still bad) 2008-Sep-22 22:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:27:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:27:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 0.956 0.941 0.916 2008-Sep-22 22:27:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 1.000 1.115 1.062 2008-Sep-22 22:27:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.939 0.908 1.079 2008-Sep-22 22:27:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.093 0.903 0.103 2008-Sep-22 22:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:28:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:28:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 0.954 0.943 0.915 2008-Sep-22 22:28:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.997 1.117 1.061 2008-Sep-22 22:28:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.936 0.907 1.081 2008-Sep-22 22:28:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.093 0.902 0.103 2008-Sep-22 22:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:29:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:29:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 0.955 0.944 0.913 2008-Sep-22 22:29:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.994 1.115 1.062 2008-Sep-22 22:29:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.935 0.906 1.079 2008-Sep-22 22:29:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.093 0.902 0.103 2008-Sep-22 22:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:30:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:30:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 0.955 0.942 0.913 2008-Sep-22 22:30:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.992 1.118 1.062 2008-Sep-22 22:30:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.939 0.909 1.079 2008-Sep-22 22:30:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.093 0.902 0.103 2008-Sep-22 22:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:31:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:31:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 0.956 0.941 0.914 2008-Sep-22 22:31:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.996 1.115 1.059 2008-Sep-22 22:31:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.932 0.908 1.077 2008-Sep-22 22:31:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.094 0.902 0.103 2008-Sep-22 22:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.113 (still bad) 2008-Sep-22 22:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:32:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:32:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.951 0.943 0.914 2008-Sep-22 22:32:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.993 1.119 1.060 2008-Sep-22 22:32:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.933 0.907 1.078 2008-Sep-22 22:32:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.094 0.902 0.103 2008-Sep-22 22:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:33:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:33:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.064 0.957 0.943 0.915 2008-Sep-22 22:33:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.996 1.120 1.064 2008-Sep-22 22:33:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.938 0.907 1.079 2008-Sep-22 22:33:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.093 0.903 0.103 2008-Sep-22 22:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 22:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.124 (still bad) 2008-Sep-22 22:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.125 (still bad) 2008-Sep-22 22:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.125 (still bad) 2008-Sep-22 22:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.124 (still bad) 2008-Sep-22 22:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 22:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 22:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 22:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:34:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:34:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 0.956 0.942 0.913 2008-Sep-22 22:34:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.998 1.119 1.063 2008-Sep-22 22:34:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.934 0.910 1.083 2008-Sep-22 22:34:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.094 0.902 0.103 2008-Sep-22 22:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:35:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:35:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 0.955 0.942 0.916 2008-Sep-22 22:35:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.995 1.119 1.064 2008-Sep-22 22:35:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.935 0.921 1.096 2008-Sep-22 22:35:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.094 0.903 0.103 2008-Sep-22 22:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 22:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:36:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:36:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 22:36:31 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Sep-22 22:36:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 22:36:31 LOG5 end_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2008-Sep-22 22:36:31 LOG1 fixed_driftmap: New position: year = 2008.7308474345325 RA = 22:18:19.3 RA/Dec = 22:18:47.0 +10:30:36.9 2008-Sep-22 22:36:31 NOTE fixed_driftmap: Correcting ZA to 7:50:36.8 ... 2008-Sep-22 22:36:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8435578983 -CF 2008-Sep-22 22:36:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-22 22:36:31 START begin_task: Starting task 'WAPP calibration' 2008-Sep-22 22:36:31 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Sep-22 22:36:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-22 22:36:31 START begin_task: Starting task 'selecting calibration type' 2008-Sep-22 22:36:31 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Sep-22 22:36:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-22 22:36:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-22 22:36:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:36:31 START begin_task: Starting task 'waiting on setcal' 2008-Sep-22 22:36:31 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-Sep-22 22:36:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8435578983 -CF 2008-Sep-22 22:36:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:36:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-22 22:36:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:36:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:36:32 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:36:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-22 22:36:32 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-Sep-22 22:36:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-22 22:36:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:36:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-22 22:36:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:36:32 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Sep-22 22:36:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:36:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:36:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:36:32 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Sep-22 22:36:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:36:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-22 22:36:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:36:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:36:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:36:32 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Sep-22 22:36:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:36:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:36:32 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Sep-22 22:36:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:36:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:36:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-22 22:36:32 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Sep-22 22:36:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-22 22:36:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-22 22:36:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-22 22:36:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:36:32 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2008-Sep-22 22:36:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:36:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-22 22:36:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:36:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:36:32 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2008-Sep-22 22:36:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-22 22:36:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-22 22:36:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 22:36:32 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Sep-22 22:36:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 22:36:32 INFO2 take_data: Starting WAPP scan: 826600106 2008-Sep-22 22:36:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-22 22:36:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 22:36:32 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Sep-22 22:36:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:36:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9393.00 2008-Sep-22 22:36:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:36:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.959 0.942 0.916 2008-Sep-22 22:36:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.999 1.116 1.065 2008-Sep-22 22:36:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.910 0.938 0.909 1.082 2008-Sep-22 22:36:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.094 0.902 0.103 2008-Sep-22 22:36:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:36:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:36:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:36:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:36:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:36:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:36:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:36:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:36:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:36:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:36:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 22:36:34 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Sep-22 22:36:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 22:36:34 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Sep-22 22:36:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-22 22:36:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 22:36:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 22:36:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:36:34 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Sep-22 22:36:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:36:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 22:36:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:36:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:36:34 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Sep-22 22:36:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-22 22:36:34 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-22 22:36:34 LOG5 finish_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Sep-22 22:36:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-22 22:36:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:36:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-22 22:36:34 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Sep-22 22:36:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Sep-22 22:36:35 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Sep-22 22:36:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 22:36:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 22:36:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 22:36:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 22:36:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-22 22:36:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-22 22:36:35 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-22 22:36:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 22:36:35 LOG5 begin_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2008-Sep-22 22:36:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 22:36:35 INFO2 take_data: Starting WAPP scan: 826600107 2008-Sep-22 22:36:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-22 22:36:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 22:36:35 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Sep-22 22:36:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 22:36:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:36:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9396.00 2008-Sep-22 22:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.547 (still bad) 2008-Sep-22 22:36:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20080922.a2010.0025.fits 2008-Sep-22 22:36:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080922.a2010.0025.fits} 2008-Sep-22 22:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:37:34 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:37:34.302 (seconds: 81454.302)!} 2008-Sep-22 22:37:34 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:37:34.302 (seconds: 81454.302)! 2008-Sep-22 22:37:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:37:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 0.960 0.941 0.920 2008-Sep-22 22:37:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 1.000 1.118 1.067 2008-Sep-22 22:37:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.940 0.907 1.085 2008-Sep-22 22:37:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.094 0.901 0.104 2008-Sep-22 22:37:35 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 81453.0 to 81454.0! 2008-Sep-22 22:37:36 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (81453.0 - 81455.0)! 2008-Sep-22 22:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:38:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:38:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.962 0.940 0.922 2008-Sep-22 22:38:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 1.002 1.115 1.068 2008-Sep-22 22:38:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.943 0.920 1.093 2008-Sep-22 22:38:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.094 0.902 0.103 2008-Sep-22 22:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:39:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:39:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 0.960 0.941 0.918 2008-Sep-22 22:39:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 1.004 1.116 1.065 2008-Sep-22 22:39:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.940 0.908 1.082 2008-Sep-22 22:39:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.093 0.903 0.103 2008-Sep-22 22:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:40:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:40:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.961 0.942 0.918 2008-Sep-22 22:40:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.002 1.113 1.066 2008-Sep-22 22:40:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.938 0.907 1.083 2008-Sep-22 22:40:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.094 0.902 0.104 2008-Sep-22 22:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:41:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:41:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 0.960 0.941 0.916 2008-Sep-22 22:41:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 1.003 1.115 1.068 2008-Sep-22 22:41:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.939 0.909 1.085 2008-Sep-22 22:41:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.093 0.903 0.103 2008-Sep-22 22:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.113 (still bad) 2008-Sep-22 22:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.113 (still bad) 2008-Sep-22 22:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.113 (still bad) 2008-Sep-22 22:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.112 (still bad) 2008-Sep-22 22:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.112 (still bad) 2008-Sep-22 22:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.113 (still bad) 2008-Sep-22 22:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.113 (still bad) 2008-Sep-22 22:42:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:42:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 0.961 0.940 0.917 2008-Sep-22 22:42:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 1.004 1.115 1.068 2008-Sep-22 22:42:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.944 0.907 1.084 2008-Sep-22 22:42:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.094 0.901 0.103 2008-Sep-22 22:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 22:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:43:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:43:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.064 0.962 0.943 0.917 2008-Sep-22 22:43:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.004 1.115 1.069 2008-Sep-22 22:43:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.947 0.906 1.087 2008-Sep-22 22:43:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.094 0.903 0.103 2008-Sep-22 22:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.113 (still bad) 2008-Sep-22 22:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.113 (still bad) 2008-Sep-22 22:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.113 (still bad) 2008-Sep-22 22:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:44:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:44:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.064 0.962 0.941 0.918 2008-Sep-22 22:44:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 1.003 1.119 1.068 2008-Sep-22 22:44:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.946 0.909 1.087 2008-Sep-22 22:44:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.094 0.903 0.103 2008-Sep-22 22:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.123 (still bad) 2008-Sep-22 22:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.123 (still bad) 2008-Sep-22 22:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 22:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 22:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 22:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 22:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.125 (still bad) 2008-Sep-22 22:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 22:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:45:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:45:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.064 0.961 0.943 0.917 2008-Sep-22 22:45:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.005 1.123 1.072 2008-Sep-22 22:45:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.943 0.913 1.091 2008-Sep-22 22:45:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.094 0.903 0.104 2008-Sep-22 22:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 22:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 22:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 22:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.127 (still bad) 2008-Sep-22 22:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 22:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.131 (still bad) 2008-Sep-22 22:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 22:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 22:46:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:46:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 22:46:36 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Sep-22 22:46:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 22:46:36 LOG5 end_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2008-Sep-22 22:46:36 LOG1 fixed_driftmap: New position: year = 2008.7308666058257 RA = 22:28:25.9 RA/Dec = 22:28:53.7 +10:30:40.3 2008-Sep-22 22:46:36 NOTE fixed_driftmap: Correcting ZA to 7:50:33.4 ... 2008-Sep-22 22:46:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8426160693 -CF 2008-Sep-22 22:46:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-22 22:46:36 START begin_task: Starting task 'WAPP calibration' 2008-Sep-22 22:46:36 LOG5 begin_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2008-Sep-22 22:46:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-22 22:46:36 START begin_task: Starting task 'selecting calibration type' 2008-Sep-22 22:46:36 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Sep-22 22:46:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-22 22:46:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-22 22:46:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:46:36 START begin_task: Starting task 'waiting on setcal' 2008-Sep-22 22:46:36 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-Sep-22 22:46:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8426160693 -CF 2008-Sep-22 22:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 22:46:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:46:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-22 22:46:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:46:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:46:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:46:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-22 22:46:36 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-Sep-22 22:46:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-22 22:46:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:46:37 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-22 22:46:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:46:37 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-Sep-22 22:46:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:46:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:46:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:46:37 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-Sep-22 22:46:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:46:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-22 22:46:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:46:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:46:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:46:37 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Sep-22 22:46:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:46:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:46:37 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Sep-22 22:46:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:46:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:46:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-22 22:46:37 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Sep-22 22:46:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-22 22:46:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-22 22:46:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-22 22:46:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:46:37 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-Sep-22 22:46:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:46:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-22 22:46:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:46:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:46:37 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-Sep-22 22:46:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-22 22:46:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-22 22:46:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 22:46:37 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Sep-22 22:46:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 22:46:37 INFO2 take_data: Starting WAPP scan: 826600108 2008-Sep-22 22:46:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-22 22:46:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 22:46:37 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Sep-22 22:46:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:46:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9998.00 2008-Sep-22 22:46:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:46:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:46:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:46:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:46:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:46:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:46:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:46:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:46:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:46:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:46:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 22:46:39 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Sep-22 22:46:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 22:46:39 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Sep-22 22:46:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-22 22:46:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 22:46:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 22:46:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:46:39 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Sep-22 22:46:39 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:46:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 22:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.567 (still bad) 2008-Sep-22 22:46:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:46:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:46:39 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Sep-22 22:46:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-22 22:46:39 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-22 22:46:39 LOG5 finish_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2008-Sep-22 22:46:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-22 22:46:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:46:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-22 22:46:39 LOG5 end_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2008-Sep-22 22:46:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Sep-22 22:46:39 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Sep-22 22:46:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 22:46:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 22:46:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 22:46:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 22:46:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-22 22:46:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-22 22:46:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-22 22:46:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 22:46:40 LOG5 begin_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2008-Sep-22 22:46:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 22:46:40 INFO2 take_data: Starting WAPP scan: 826600109 2008-Sep-22 22:46:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-22 22:46:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 22:46:40 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Sep-22 22:46:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 22:46:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:46:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10001.00 2008-Sep-22 22:46:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20080922.a2010.0026.fits 2008-Sep-22 22:46:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080922.a2010.0026.fits} 2008-Sep-22 22:46:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:46:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:46:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:46:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:46:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:46:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:46:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:46:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:46:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.139 (still bad) 2008-Sep-22 22:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-22 22:46:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:46:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.960 0.942 0.918 2008-Sep-22 22:46:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.003 1.142 1.087 2008-Sep-22 22:46:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.926 0.958 0.908 1.085 2008-Sep-22 22:46:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.093 0.903 0.103 2008-Sep-22 22:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.139 (still bad) 2008-Sep-22 22:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.138 (still bad) 2008-Sep-22 22:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-22 22:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-22 22:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.151 (still bad) 2008-Sep-22 22:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.162 (still bad) 2008-Sep-22 22:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.166 (still bad) 2008-Sep-22 22:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.167 (still bad) 2008-Sep-22 22:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.160 (still bad) 2008-Sep-22 22:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.148 (still bad) 2008-Sep-22 22:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.137 (still bad) 2008-Sep-22 22:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 22:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 22:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 22:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.126 (still bad) 2008-Sep-22 22:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.126 (still bad) 2008-Sep-22 22:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.126 (still bad) 2008-Sep-22 22:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.123 (still bad) 2008-Sep-22 22:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:47:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:47:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 0.959 0.942 0.915 2008-Sep-22 22:47:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 1.001 1.122 1.069 2008-Sep-22 22:47:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.948 0.907 1.085 2008-Sep-22 22:47:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.094 0.902 0.104 2008-Sep-22 22:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 22:48:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:48:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.956 0.943 0.917 2008-Sep-22 22:48:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.000 1.124 1.074 2008-Sep-22 22:48:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.940 0.906 1.085 2008-Sep-22 22:48:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.093 0.903 0.103 2008-Sep-22 22:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.129 (still bad) 2008-Sep-22 22:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 22:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.124 (still bad) 2008-Sep-22 22:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.123 (still bad) 2008-Sep-22 22:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 22:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 22:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:49:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:49:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.956 0.942 0.917 2008-Sep-22 22:49:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.999 1.119 1.068 2008-Sep-22 22:49:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.939 0.907 1.083 2008-Sep-22 22:49:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.094 0.909 0.103 2008-Sep-22 22:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:50:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:50:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 0.958 0.943 0.917 2008-Sep-22 22:50:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.999 1.116 1.064 2008-Sep-22 22:50:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.909 0.935 0.905 1.085 2008-Sep-22 22:50:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.093 0.904 0.103 2008-Sep-22 22:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.114 (still bad) 2008-Sep-22 22:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.115 (still bad) 2008-Sep-22 22:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:51:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:51:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.955 0.941 0.916 2008-Sep-22 22:51:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.001 1.119 1.064 2008-Sep-22 22:51:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.940 0.904 1.080 2008-Sep-22 22:51:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.093 0.902 0.103 2008-Sep-22 22:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:52:33 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:52:33.302 (seconds: 82353.302)!} 2008-Sep-22 22:52:33 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:52:33.302 (seconds: 82353.302)! 2008-Sep-22 22:52:34 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 82352.0 to 82353.0! 2008-Sep-22 22:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:52:35 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (82352.0 - 82354.0)! 2008-Sep-22 22:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:52:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:52:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.957 0.941 0.916 2008-Sep-22 22:52:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.998 1.118 1.062 2008-Sep-22 22:52:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.940 0.909 1.081 2008-Sep-22 22:52:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.093 0.905 0.103 2008-Sep-22 22:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 22:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 22:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 22:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 22:53:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:53:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.956 0.942 0.917 2008-Sep-22 22:53:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.996 1.118 1.064 2008-Sep-22 22:53:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.939 0.907 1.081 2008-Sep-22 22:53:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.093 0.904 0.104 2008-Sep-22 22:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 22:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:55:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:55:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.064 0.960 0.946 0.919 2008-Sep-22 22:55:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.001 1.122 1.064 2008-Sep-22 22:55:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.936 0.905 1.084 2008-Sep-22 22:55:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.094 0.906 0.104 2008-Sep-22 22:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.124 (still bad) 2008-Sep-22 22:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 22:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:56:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:56:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 0.960 0.944 0.919 2008-Sep-22 22:56:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.002 1.121 1.066 2008-Sep-22 22:56:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.938 0.908 1.084 2008-Sep-22 22:56:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.094 0.905 0.104 2008-Sep-22 22:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:56:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:56:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 22:56:41 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Sep-22 22:56:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 22:56:41 LOG5 end_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2008-Sep-22 22:56:41 LOG1 fixed_driftmap: New position: year = 2008.7308857771188 RA = 22:38:32.4 RA/Dec = 22:39:00.3 +10:30:43.4 2008-Sep-22 22:56:41 NOTE fixed_driftmap: Correcting ZA to 7:50:30.3 ... 2008-Sep-22 22:56:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8417630276 -CF 2008-Sep-22 22:56:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-22 22:56:41 START begin_task: Starting task 'WAPP calibration' 2008-Sep-22 22:56:41 LOG5 begin_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2008-Sep-22 22:56:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-22 22:56:41 START begin_task: Starting task 'selecting calibration type' 2008-Sep-22 22:56:41 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Sep-22 22:56:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-22 22:56:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-22 22:56:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:56:41 START begin_task: Starting task 'waiting on setcal' 2008-Sep-22 22:56:41 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Sep-22 22:56:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8417630276 -CF 2008-Sep-22 22:56:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:56:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-22 22:56:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 22:56:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:56:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 22:56:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-22 22:56:41 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Sep-22 22:56:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-22 22:56:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:56:41 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-22 22:56:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:56:41 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2008-Sep-22 22:56:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 22:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:56:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:56:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:56:42 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2008-Sep-22 22:56:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:56:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-22 22:56:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 22:56:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:56:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 22:56:42 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Sep-22 22:56:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 22:56:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 22:56:42 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Sep-22 22:56:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 22:56:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 22:56:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-22 22:56:42 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Sep-22 22:56:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-22 22:56:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-22 22:56:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-22 22:56:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:56:42 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2008-Sep-22 22:56:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:56:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-22 22:56:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:56:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:56:42 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2008-Sep-22 22:56:42 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-22 22:56:42 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-22 22:56:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 22:56:42 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Sep-22 22:56:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 22:56:42 INFO2 take_data: Starting WAPP scan: 826600110 2008-Sep-22 22:56:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-22 22:56:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 22:56:42 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Sep-22 22:56:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:56:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10603.00 2008-Sep-22 22:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:56:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 22:56:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 22:56:44 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Sep-22 22:56:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 22:56:44 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Sep-22 22:56:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-22 22:56:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 22:56:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 22:56:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 22:56:44 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Sep-22 22:56:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 22:56:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 22:56:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 22:56:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 22:56:44 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Sep-22 22:56:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-22 22:56:44 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-22 22:56:44 LOG5 finish_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2008-Sep-22 22:56:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-22 22:56:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 22:56:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-22 22:56:44 LOG5 end_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2008-Sep-22 22:56:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Sep-22 22:56:44 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Sep-22 22:56:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 22:56:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 22:56:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 22:56:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 22:56:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-22 22:56:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-22 22:56:45 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-22 22:56:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 22:56:45 LOG5 begin_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2008-Sep-22 22:56:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 22:56:45 INFO2 take_data: Starting WAPP scan: 826600111 2008-Sep-22 22:56:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-22 22:56:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 22:56:45 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Sep-22 22:56:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 22:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.554 (still bad) 2008-Sep-22 22:56:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 22:56:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20080922.a2010.0027.fits 2008-Sep-22 22:56:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10606.00 2008-Sep-22 22:56:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080922.a2010.0027.fits} 2008-Sep-22 22:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 22:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 22:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 22:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 22:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 22:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 22:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 22:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 22:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.554 (still bad) 2008-Sep-22 22:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.123 (still bad) 2008-Sep-22 22:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.132 (still bad) 2008-Sep-22 22:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-22 22:57:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:57:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.964 0.945 0.920 2008-Sep-22 22:57:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.000 1.118 1.067 2008-Sep-22 22:57:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.944 0.951 1.145 2008-Sep-22 22:57:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.094 0.907 0.103 2008-Sep-22 22:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-22 22:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 22:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 22:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 22:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.142 (still bad) 2008-Sep-22 22:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.171 (still bad) 2008-Sep-22 22:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.190 (still bad) 2008-Sep-22 22:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.194 (still bad) 2008-Sep-22 22:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.184 (still bad) 2008-Sep-22 22:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.163 (still bad) 2008-Sep-22 22:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-22 22:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 22:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 22:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 22:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.130 (still bad) 2008-Sep-22 22:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 22:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 22:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.129 (still bad) 2008-Sep-22 22:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.128 (still bad) 2008-Sep-22 22:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.126 (still bad) 2008-Sep-22 22:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.123 (still bad) 2008-Sep-22 22:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.123 (still bad) 2008-Sep-22 22:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.123 (still bad) 2008-Sep-22 22:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 22:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 22:58:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 22:58:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 0.970 0.946 0.920 2008-Sep-22 22:58:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.015 1.127 1.074 2008-Sep-22 22:58:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.947 0.907 1.084 2008-Sep-22 22:58:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.093 0.908 0.103 2008-Sep-22 22:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.129 (still bad) 2008-Sep-22 22:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.132 (still bad) 2008-Sep-22 22:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 22:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-22 22:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 22:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 22:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 22:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:59:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 22:59:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 0.986 0.946 0.923 2008-Sep-22 22:59:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.007 1.119 1.066 2008-Sep-22 22:59:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.947 0.904 1.084 2008-Sep-22 22:59:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.094 0.906 0.103 2008-Sep-22 22:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 22:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 22:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 22:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 22:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 22:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 22:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 22:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 22:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:00:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 23:00:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.064 0.961 0.944 0.921 2008-Sep-22 23:00:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.005 1.120 1.066 2008-Sep-22 23:00:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.943 0.908 1.083 2008-Sep-22 23:00:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.093 0.906 0.103 2008-Sep-22 23:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:01:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 23:01:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.962 0.944 0.921 2008-Sep-22 23:01:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.005 1.120 1.066 2008-Sep-22 23:01:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.938 0.905 1.085 2008-Sep-22 23:01:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.093 0.904 0.104 2008-Sep-22 23:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.096 and 1.102 (still bad) 2008-Sep-22 23:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.095 (still bad) 2008-Sep-22 23:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:02:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 23:02:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 0.966 0.944 0.921 2008-Sep-22 23:02:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.005 1.119 1.068 2008-Sep-22 23:02:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.944 0.905 1.087 2008-Sep-22 23:02:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.093 0.906 0.103 2008-Sep-22 23:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 23:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.123 (still bad) 2008-Sep-22 23:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 23:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 23:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 23:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 23:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:03:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 23:03:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.965 0.944 0.922 2008-Sep-22 23:03:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.005 1.121 1.067 2008-Sep-22 23:03:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.942 0.906 1.090 2008-Sep-22 23:03:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.093 0.906 0.103 2008-Sep-22 23:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 23:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:04:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 23:04:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.968 0.942 0.920 2008-Sep-22 23:04:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.005 1.118 1.068 2008-Sep-22 23:04:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.943 0.907 1.089 2008-Sep-22 23:04:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.093 0.906 0.104 2008-Sep-22 23:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:05:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:05:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.965 0.944 0.922 2008-Sep-22 23:05:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 1.007 1.120 1.071 2008-Sep-22 23:05:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.945 0.907 1.090 2008-Sep-22 23:05:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.094 0.905 0.104 2008-Sep-22 23:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 23:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 23:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 23:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 23:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 23:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 23:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 23:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.116 (still bad) 2008-Sep-22 23:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:06:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 23:06:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.965 0.945 0.924 2008-Sep-22 23:06:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.008 1.118 1.069 2008-Sep-22 23:06:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.943 0.907 1.093 2008-Sep-22 23:06:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.093 0.907 0.103 2008-Sep-22 23:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:06:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 23:06:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 23:06:46 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Sep-22 23:06:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 23:06:46 LOG5 end_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2008-Sep-22 23:06:46 LOG1 fixed_driftmap: New position: year = 2008.7309049484118 RA = 22:48:39.0 RA/Dec = 22:49:07.0 +10:30:46.1 2008-Sep-22 23:06:46 NOTE fixed_driftmap: Correcting ZA to 7:50:27.6 ... 2008-Sep-22 23:06:46 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8410004335 -CF 2008-Sep-22 23:06:46 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-22 23:06:46 START begin_task: Starting task 'WAPP calibration' 2008-Sep-22 23:06:46 LOG5 begin_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2008-Sep-22 23:06:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-22 23:06:46 START begin_task: Starting task 'selecting calibration type' 2008-Sep-22 23:06:46 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Sep-22 23:06:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-22 23:06:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-22 23:06:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 23:06:46 START begin_task: Starting task 'waiting on setcal' 2008-Sep-22 23:06:46 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2008-Sep-22 23:06:46 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8410004335 -CF 2008-Sep-22 23:06:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:06:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-22 23:06:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 23:06:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:06:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 23:06:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-22 23:06:46 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2008-Sep-22 23:06:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-22 23:06:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 23:06:46 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-22 23:06:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 23:06:46 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2008-Sep-22 23:06:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:06:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 23:06:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 23:06:46 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2008-Sep-22 23:06:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 23:06:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-22 23:06:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 23:06:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 23:06:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 23:06:47 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Sep-22 23:06:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 23:06:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 23:06:47 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Sep-22 23:06:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 23:06:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 23:06:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-22 23:06:47 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Sep-22 23:06:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-22 23:06:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-22 23:06:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-22 23:06:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 23:06:47 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-Sep-22 23:06:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 23:06:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-22 23:06:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 23:06:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 23:06:47 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-Sep-22 23:06:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-22 23:06:47 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-22 23:06:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 23:06:47 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-Sep-22 23:06:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 23:06:47 INFO2 take_data: Starting WAPP scan: 826600112 2008-Sep-22 23:06:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-22 23:06:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 23:06:47 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Sep-22 23:06:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 23:06:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11208.00 2008-Sep-22 23:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 23:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 23:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 23:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 23:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 23:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 23:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 23:06:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 23:06:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 23:06:49 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Sep-22 23:06:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 23:06:49 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-Sep-22 23:06:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-22 23:06:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 23:06:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 23:06:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 23:06:49 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Sep-22 23:06:50 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 23:06:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 23:06:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 23:06:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 23:06:50 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Sep-22 23:06:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-22 23:06:50 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-22 23:06:50 LOG5 finish_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2008-Sep-22 23:06:50 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-22 23:06:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 23:06:50 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-22 23:06:50 LOG5 end_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2008-Sep-22 23:06:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2008-Sep-22 23:06:50 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2008-Sep-22 23:06:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 23:06:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 23:06:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 23:06:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 23:06:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-22 23:06:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-22 23:06:50 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-22 23:06:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 23:06:50 LOG5 begin_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2008-Sep-22 23:06:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 23:06:50 INFO2 take_data: Starting WAPP scan: 826600113 2008-Sep-22 23:06:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-22 23:06:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 23:06:50 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Sep-22 23:06:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 23:06:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 23:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.552 (still bad) 2008-Sep-22 23:06:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11211.00 2008-Sep-22 23:06:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20080922.a2010.0028.fits 2008-Sep-22 23:06:50 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080922.a2010.0028.fits} 2008-Sep-22 23:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 23:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 23:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 23:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 23:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 23:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 23:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 23:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.552 (still bad) 2008-Sep-22 23:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:07:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:07:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.965 0.945 0.923 2008-Sep-22 23:07:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.005 1.119 1.072 2008-Sep-22 23:07:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.945 0.905 1.090 2008-Sep-22 23:07:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.094 0.907 0.104 2008-Sep-22 23:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:07:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:07:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999966 != 99999964)! 2008-Sep-22 23:07:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999966 != 99999964)! 2008-Sep-22 23:07:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 1 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 3 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 5 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 6 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 7 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999964 != 99999966)! 2008-Sep-22 23:07:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999964 != 99999966)! 2008-Sep-22 23:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:07:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999966 != 99999964)! 2008-Sep-22 23:07:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 7 (99999966 != 99999964)! 2008-Sep-22 23:07:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:07:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:07:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:07:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:07:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:07:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:07:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:07:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:07:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999964)! 2008-Sep-22 23:07:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:07:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 1 (99999966 != 99999964)! 2008-Sep-22 23:07:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999966 != 99999964)! 2008-Sep-22 23:07:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999964)! 2008-Sep-22 23:07:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:07:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:07:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:07:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999966 != 99999964)! 2008-Sep-22 23:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:07:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999966 != 99999964)! 2008-Sep-22 23:07:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:07:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:07:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:07:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:07:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:07:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:07:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:08:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:08:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:08:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 7 (99999966 != 99999964)! 2008-Sep-22 23:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:08:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:08:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:08:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999964)! 2008-Sep-22 23:08:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:08:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 23:08:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:08:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:08:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:08:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:08:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:08:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:08:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:08:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:08:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:08:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:08:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:08:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.963 0.946 0.923 2008-Sep-22 23:08:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.007 1.119 1.071 2008-Sep-22 23:08:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.947 0.909 1.091 2008-Sep-22 23:08:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.094 0.905 0.104 2008-Sep-22 23:08:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:08:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:08:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:08:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999964)! 2008-Sep-22 23:08:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:08:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 1 (99999966 != 99999964)! 2008-Sep-22 23:08:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:08:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:08:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:08:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:08:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:08:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:08:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:08:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:08:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:08:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:08:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:08:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:08:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:08:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:08:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 3 (99999966 != 99999964)! 2008-Sep-22 23:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 23:08:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:08:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999964)! 2008-Sep-22 23:08:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:08:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:08:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:08:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:08:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:08:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 23:08:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:08:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:08:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:08:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999966 != 99999964)! 2008-Sep-22 23:08:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:08:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:08:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:08:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:08:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:08:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 1 (99999966 != 99999964)! 2008-Sep-22 23:08:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:08:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:09:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:09:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:09:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:09:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:09:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:09:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:09:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:09:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:09:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:09:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:09:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:09:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:09:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:09:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.966 0.944 0.924 2008-Sep-22 23:09:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.007 1.120 1.071 2008-Sep-22 23:09:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.949 0.908 1.091 2008-Sep-22 23:09:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.094 0.906 0.104 2008-Sep-22 23:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:09:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:09:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:09:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:09:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:09:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:09:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:09:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:09:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:09:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:09:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:09:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:09:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:09:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:09:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:09:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:09:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:09:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:09:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:09:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:09:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:09:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:09:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:09:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:09:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:09:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:09:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:09:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:09:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:09:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:09:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:09:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:09:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:09:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:09:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 2 (99999966 != 99999964)! 2008-Sep-22 23:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:09:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:09:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:09:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:10:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:10:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:10:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:10:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:10:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:10:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:10:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:10:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:10:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:10:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:10:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:10:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:10:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:10:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:10:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:10:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.093 < 0.75)! 2008-Sep-22 23:10:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.962 0.943 0.924 2008-Sep-22 23:10:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.006 1.118 1.072 2008-Sep-22 23:10:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.943 0.906 1.090 2008-Sep-22 23:10:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.093 0.905 0.103 2008-Sep-22 23:10:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:10:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:10:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:10:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:10:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:10:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:10:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:10:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:10:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:10:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:10:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:10:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:10:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:10:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:10:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:10:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:10:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:10:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:10:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:10:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:10:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:10:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:10:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:10:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:10:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:10:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:11:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:11:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:11:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:11:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:11:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:11:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:11:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:11:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:11:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:11:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:11:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 23:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:11:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 1 (99999966 != 99999964)! 2008-Sep-22 23:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:11:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:11:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:11:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.963 0.942 0.921 2008-Sep-22 23:11:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 1.006 1.121 1.072 2008-Sep-22 23:11:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.947 0.905 1.090 2008-Sep-22 23:11:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.094 0.908 0.104 2008-Sep-22 23:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:11:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:11:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:11:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.117 (still bad) 2008-Sep-22 23:11:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.119 (still bad) 2008-Sep-22 23:11:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:11:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:11:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:11:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:11:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:11:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:11:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:11:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:11:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:11:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:11:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:11:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:11:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:11:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:11:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:12:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.118 (still bad) 2008-Sep-22 23:12:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 23:12:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:12:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.114 (still bad) 2008-Sep-22 23:12:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:12:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 23:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 23:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 23:12:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:12:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:12:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 23:12:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:12:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.970 0.943 0.922 2008-Sep-22 23:12:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.013 1.116 1.070 2008-Sep-22 23:12:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.950 0.905 1.090 2008-Sep-22 23:12:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.094 0.907 0.104 2008-Sep-22 23:12:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 23:12:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:12:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 23:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:12:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:12:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:12:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:12:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:12:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:12:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:12:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:12:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:12:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:12:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:12:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:12:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:12:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 23:12:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:12:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:12:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:12:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:12:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:13:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:13:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.115 (still bad) 2008-Sep-22 23:13:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.116 (still bad) 2008-Sep-22 23:13:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:13:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:13:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.117 (still bad) 2008-Sep-22 23:13:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:13:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:13:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:13:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:13:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:13:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:13:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:13:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:13:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:13:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:13:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:13:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 0.969 0.943 0.922 2008-Sep-22 23:13:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.007 1.119 1.070 2008-Sep-22 23:13:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.944 0.906 1.088 2008-Sep-22 23:13:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.094 0.905 0.104 2008-Sep-22 23:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:13:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:13:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:13:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:13:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:13:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:13:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:13:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:13:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:13:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:13:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:13:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:13:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:13:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:13:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:13:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:14:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:14:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:14:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:14:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:14:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:14:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:14:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:14:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:14:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.118 (still bad) 2008-Sep-22 23:14:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:14:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:14:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:14:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:14:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:14:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.966 0.943 0.921 2008-Sep-22 23:14:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.006 1.124 1.071 2008-Sep-22 23:14:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.918 0.946 0.909 1.088 2008-Sep-22 23:14:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.094 0.906 0.104 2008-Sep-22 23:14:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:14:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.126 (still bad) 2008-Sep-22 23:14:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:14:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:14:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:14:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:14:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.129 (still bad) 2008-Sep-22 23:14:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.128 (still bad) 2008-Sep-22 23:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:14:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:14:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:15:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:15:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:15:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:15:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:15:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:15:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 0.965 0.945 0.924 2008-Sep-22 23:15:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.008 1.121 1.071 2008-Sep-22 23:15:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.949 0.908 1.088 2008-Sep-22 23:15:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.094 0.906 0.104 2008-Sep-22 23:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:15:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:15:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:15:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:15:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:15:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:15:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:15:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:15:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:15:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:15:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:15:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:16:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:16:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:16:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:16:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:16:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:16:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 0.970 0.943 0.925 2008-Sep-22 23:16:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.008 1.124 1.072 2008-Sep-22 23:16:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.947 0.913 1.091 2008-Sep-22 23:16:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.094 0.907 0.104 2008-Sep-22 23:16:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:16:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:16:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:16:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:16:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:16:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:16:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:16:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:16:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:16:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 23:16:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 23:16:51 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Sep-22 23:16:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 23:16:51 LOG5 end_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2008-Sep-22 23:16:51 LOG1 fixed_driftmap: New position: year = 2008.7309241197049 RA = 22:58:45.5 RA/Dec = 22:59:13.6 +10:30:48.5 2008-Sep-22 23:16:51 NOTE fixed_driftmap: Correcting ZA to 7:50:25.2 ... 2008-Sep-22 23:16:51 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8403297673 -CF 2008-Sep-22 23:16:51 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-22 23:16:51 START begin_task: Starting task 'WAPP calibration' 2008-Sep-22 23:16:51 LOG5 begin_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2008-Sep-22 23:16:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-22 23:16:51 START begin_task: Starting task 'selecting calibration type' 2008-Sep-22 23:16:51 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Sep-22 23:16:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-22 23:16:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-22 23:16:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 23:16:51 START begin_task: Starting task 'waiting on setcal' 2008-Sep-22 23:16:51 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-Sep-22 23:16:51 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8403297673 -CF 2008-Sep-22 23:16:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:16:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-22 23:16:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 23:16:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:16:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 23:16:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-22 23:16:52 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-Sep-22 23:16:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-22 23:16:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 23:16:52 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-22 23:16:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 23:16:52 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Sep-22 23:16:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:16:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 23:16:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 23:16:52 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Sep-22 23:16:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 23:16:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-22 23:16:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 23:16:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 23:16:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 23:16:52 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Sep-22 23:16:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 23:16:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 23:16:52 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Sep-22 23:16:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 23:16:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 23:16:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-22 23:16:52 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Sep-22 23:16:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-22 23:16:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-22 23:16:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-22 23:16:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 23:16:52 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Sep-22 23:16:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 23:16:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-22 23:16:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 23:16:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 23:16:52 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Sep-22 23:16:52 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-22 23:16:52 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-22 23:16:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 23:16:52 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Sep-22 23:16:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 23:16:52 INFO2 take_data: Starting WAPP scan: 826600114 2008-Sep-22 23:16:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-22 23:16:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 23:16:52 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Sep-22 23:16:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 23:16:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11813.00 2008-Sep-22 23:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 23:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 23:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 23:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 23:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 23:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 23:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 23:16:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 23:16:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 23:16:54 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Sep-22 23:16:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 23:16:54 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Sep-22 23:16:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-22 23:16:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 23:16:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 23:16:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 23:16:54 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Sep-22 23:16:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 23:16:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 23:16:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 23:16:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 23:16:54 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Sep-22 23:16:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-22 23:16:54 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-22 23:16:54 LOG5 finish_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2008-Sep-22 23:16:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-22 23:16:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 23:16:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-22 23:16:54 LOG5 end_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2008-Sep-22 23:16:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2008-Sep-22 23:16:55 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2008-Sep-22 23:16:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 23:16:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 23:16:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 23:16:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 23:16:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-22 23:16:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-22 23:16:55 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-22 23:16:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 23:16:55 LOG5 begin_task: Level: (2) ID = <10207> Status = 0 0 0 0 ok 2008-Sep-22 23:16:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 23:16:55 INFO2 take_data: Starting WAPP scan: 826600115 2008-Sep-22 23:16:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-22 23:16:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 23:16:55 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Sep-22 23:16:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 23:16:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 23:16:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11816.00 2008-Sep-22 23:16:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20080922.a2010.0029.fits 2008-Sep-22 23:16:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080922.a2010.0029.fits} 2008-Sep-22 23:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.557 (still bad) 2008-Sep-22 23:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 23:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 23:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 23:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 23:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 23:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 23:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 23:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.557 (still bad) 2008-Sep-22 23:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:17:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:17:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:17:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:17:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:17:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:17:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:17:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:17:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:17:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 0.968 0.948 0.926 2008-Sep-22 23:17:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.014 1.123 1.069 2008-Sep-22 23:17:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.944 0.909 1.087 2008-Sep-22 23:17:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.094 0.905 0.104 2008-Sep-22 23:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:17:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:17:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:17:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999964)! 2008-Sep-22 23:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:17:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:17:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:18:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:18:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:18:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:18:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:18:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:18:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:18:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:18:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:18:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:18:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:18:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:18:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:18:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.966 0.949 0.930 2008-Sep-22 23:18:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.010 1.122 1.068 2008-Sep-22 23:18:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.947 0.909 1.089 2008-Sep-22 23:18:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.094 0.910 0.104 2008-Sep-22 23:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:18:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:18:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:18:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:18:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:18:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.124 (still bad) 2008-Sep-22 23:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:19:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.124 (still bad) 2008-Sep-22 23:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.125 (still bad) 2008-Sep-22 23:19:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:19:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:19:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:19:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:19:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.968 0.944 0.926 2008-Sep-22 23:19:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.011 1.122 1.070 2008-Sep-22 23:19:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.945 0.907 1.088 2008-Sep-22 23:19:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.094 0.906 0.104 2008-Sep-22 23:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:19:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:19:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:19:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.125 (still bad) 2008-Sep-22 23:19:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.123 (still bad) 2008-Sep-22 23:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.125 (still bad) 2008-Sep-22 23:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:20:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:20:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.125 (still bad) 2008-Sep-22 23:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:20:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.124 (still bad) 2008-Sep-22 23:20:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.124 (still bad) 2008-Sep-22 23:20:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:20:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.122 (still bad) 2008-Sep-22 23:20:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:20:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:20:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.967 0.951 0.930 2008-Sep-22 23:20:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.010 1.124 1.069 2008-Sep-22 23:20:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.918 0.945 0.907 1.087 2008-Sep-22 23:20:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.094 0.909 0.104 2008-Sep-22 23:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.124 (still bad) 2008-Sep-22 23:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:20:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:20:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.124 (still bad) 2008-Sep-22 23:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:20:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:20:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:20:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:21:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:21:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:21:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:21:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:21:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.967 0.945 0.928 2008-Sep-22 23:21:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 1.012 1.123 1.071 2008-Sep-22 23:21:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.949 0.909 1.090 2008-Sep-22 23:21:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.094 0.908 0.104 2008-Sep-22 23:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:21:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:21:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:21:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:21:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:22:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:22:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:22:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:22:31 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 23:22:31.301 (seconds: 84151.301)!} 2008-Sep-22 23:22:31 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 23:22:31.301 (seconds: 84151.301)! 2008-Sep-22 23:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:22:32 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 84150.0 to 84151.0! 2008-Sep-22 23:22:33 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (84150.0 - 84152.0)! 2008-Sep-22 23:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:22:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:22:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.968 0.946 0.925 2008-Sep-22 23:22:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.011 1.125 1.074 2008-Sep-22 23:22:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.945 0.910 1.091 2008-Sep-22 23:22:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.094 0.906 0.104 2008-Sep-22 23:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:23:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:23:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:23:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:23:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:23:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:23:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.972 0.946 0.924 2008-Sep-22 23:23:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 1.009 1.121 1.072 2008-Sep-22 23:23:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.947 0.910 1.092 2008-Sep-22 23:23:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.094 0.909 0.104 2008-Sep-22 23:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:23:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:23:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:24:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:24:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:24:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:24:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:24:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:24:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:24:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.965 0.944 0.925 2008-Sep-22 23:24:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.009 1.123 1.073 2008-Sep-22 23:24:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.918 0.948 0.910 1.088 2008-Sep-22 23:24:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.914 0.104 2008-Sep-22 23:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:24:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:24:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:24:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:25:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:25:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:25:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:25:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.964 0.945 0.925 2008-Sep-22 23:25:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.012 1.120 1.071 2008-Sep-22 23:25:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.918 0.952 0.909 1.087 2008-Sep-22 23:25:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.094 0.908 0.104 2008-Sep-22 23:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.119 (still bad) 2008-Sep-22 23:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:26:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:26:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.966 0.946 0.925 2008-Sep-22 23:26:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.008 1.125 1.073 2008-Sep-22 23:26:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.946 0.913 1.093 2008-Sep-22 23:26:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.094 0.909 0.104 2008-Sep-22 23:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:26:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 23:26:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 23:26:56 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Sep-22 23:26:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 23:26:56 LOG5 end_task: Level: (2) ID = <10207> Status = 0 0 0 0 ok 2008-Sep-22 23:26:56 LOG1 fixed_driftmap: New position: year = 2008.7309432909981 RA = 23:08:52.1 RA/Dec = 23:09:20.3 +10:30:50.6 2008-Sep-22 23:26:56 NOTE fixed_driftmap: Correcting ZA to 7:50:23.1 ... 2008-Sep-22 23:26:56 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8397523392 -CF 2008-Sep-22 23:26:56 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-22 23:26:56 START begin_task: Starting task 'WAPP calibration' 2008-Sep-22 23:26:56 LOG5 begin_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-Sep-22 23:26:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-22 23:26:56 START begin_task: Starting task 'selecting calibration type' 2008-Sep-22 23:26:56 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Sep-22 23:26:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-22 23:26:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-22 23:26:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 23:26:56 START begin_task: Starting task 'waiting on setcal' 2008-Sep-22 23:26:56 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Sep-22 23:26:56 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8397523392 -CF 2008-Sep-22 23:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:26:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:26:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-22 23:26:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 23:26:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:26:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 23:26:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-22 23:26:56 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Sep-22 23:26:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-22 23:26:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 23:26:57 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-22 23:26:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 23:26:57 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Sep-22 23:26:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:26:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 23:26:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 23:26:57 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Sep-22 23:26:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 23:26:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-22 23:26:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 23:26:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 23:26:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 23:26:57 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Sep-22 23:26:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 23:26:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 23:26:57 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Sep-22 23:26:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 23:26:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 23:26:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-22 23:26:57 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Sep-22 23:26:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-22 23:26:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-22 23:26:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-22 23:26:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 23:26:57 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Sep-22 23:26:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 23:26:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-22 23:26:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 23:26:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 23:26:57 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Sep-22 23:26:57 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-22 23:26:57 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-22 23:26:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 23:26:57 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Sep-22 23:26:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 23:26:57 INFO2 take_data: Starting WAPP scan: 826600116 2008-Sep-22 23:26:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-22 23:26:57 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 23:26:57 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Sep-22 23:26:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 23:26:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12418.00 2008-Sep-22 23:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 23:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 23:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 23:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 23:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 23:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 23:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 23:26:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 23:26:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 23:26:59 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Sep-22 23:26:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 23:26:59 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Sep-22 23:26:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-22 23:26:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 23:26:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 23:26:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 23:26:59 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Sep-22 23:26:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 23:26:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 23:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:26:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 23:26:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 23:26:59 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Sep-22 23:26:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-22 23:26:59 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-22 23:26:59 LOG5 finish_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-Sep-22 23:26:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-22 23:26:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 23:26:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-22 23:26:59 LOG5 end_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-Sep-22 23:26:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2008-Sep-22 23:26:59 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2008-Sep-22 23:26:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 23:26:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 23:26:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 23:27:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 23:27:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-22 23:27:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-22 23:27:00 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-22 23:27:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 23:27:00 LOG5 begin_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2008-Sep-22 23:27:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 23:27:00 INFO2 take_data: Starting WAPP scan: 826600117 2008-Sep-22 23:27:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-22 23:27:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 23:27:00 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-Sep-22 23:27:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 23:27:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 23:27:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20080922.a2010.0030.fits 2008-Sep-22 23:27:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12421.00 2008-Sep-22 23:27:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080922.a2010.0030.fits} 2008-Sep-22 23:27:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 23:27:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 23:27:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 23:27:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 23:27:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 23:27:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:27:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:27:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 23:27:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 23:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.557 (still bad) 2008-Sep-22 23:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-22 23:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-22 23:27:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-22 23:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-22 23:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:27:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:27:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:27:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.962 0.945 0.920 2008-Sep-22 23:27:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 1.006 1.121 1.070 2008-Sep-22 23:27:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.945 0.909 1.087 2008-Sep-22 23:27:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.094 0.906 0.104 2008-Sep-22 23:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:27:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:28:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:28:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:28:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:28:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.965 0.944 0.922 2008-Sep-22 23:28:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.004 1.120 1.069 2008-Sep-22 23:28:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.945 0.909 1.085 2008-Sep-22 23:28:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.094 0.908 0.104 2008-Sep-22 23:28:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:28:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.120 (still bad) 2008-Sep-22 23:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.121 (still bad) 2008-Sep-22 23:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:29:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:29:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:29:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:29:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.962 0.944 0.920 2008-Sep-22 23:29:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.006 1.122 1.069 2008-Sep-22 23:29:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.947 0.907 1.085 2008-Sep-22 23:29:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.094 0.908 0.104 2008-Sep-22 23:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:30:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:30:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.126 (still bad) 2008-Sep-22 23:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:30:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:30:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:30:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:30:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.965 0.945 0.923 2008-Sep-22 23:30:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.005 1.123 1.068 2008-Sep-22 23:30:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.950 0.909 1.087 2008-Sep-22 23:30:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.094 0.908 0.104 2008-Sep-22 23:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:30:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:31:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:31:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:31:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:31:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:31:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.960 0.944 0.924 2008-Sep-22 23:31:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.006 1.125 1.071 2008-Sep-22 23:31:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.928 0.955 0.909 1.087 2008-Sep-22 23:31:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.094 0.907 0.104 2008-Sep-22 23:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:32:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:32:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:32:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.966 0.948 0.924 2008-Sep-22 23:32:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.007 1.122 1.070 2008-Sep-22 23:32:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.941 0.935 1.110 2008-Sep-22 23:32:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.094 0.907 0.104 2008-Sep-22 23:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:33:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-22 23:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.174 (still bad) 2008-Sep-22 23:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.212 (still bad) 2008-Sep-22 23:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.247 (still bad) 2008-Sep-22 23:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.267 (still bad) 2008-Sep-22 23:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.269 (still bad) 2008-Sep-22 23:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.251 (still bad) 2008-Sep-22 23:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.218 (still bad) 2008-Sep-22 23:33:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-22 23:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.180 (still bad) 2008-Sep-22 23:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-22 23:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.148 (still bad) 2008-Sep-22 23:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.220 (still bad) 2008-Sep-22 23:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.305 (still bad) 2008-Sep-22 23:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.391 (still bad) 2008-Sep-22 23:33:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.457 (still bad) 2008-Sep-22 23:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.486 (still bad) 2008-Sep-22 23:33:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.473 (still bad) 2008-Sep-22 23:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.419 (still bad) 2008-Sep-22 23:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.333 (still bad) 2008-Sep-22 23:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.245 (still bad) 2008-Sep-22 23:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.166 (still bad) 2008-Sep-22 23:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.154 (still bad) 2008-Sep-22 23:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.183 (still bad) 2008-Sep-22 23:33:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:33:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 0.971 0.946 0.923 2008-Sep-22 23:33:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.210 1.098 1.129 1.072 2008-Sep-22 23:33:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.942 0.908 1.086 2008-Sep-22 23:33:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.094 0.910 0.104 2008-Sep-22 23:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.231 (still bad) 2008-Sep-22 23:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.226 (still bad) 2008-Sep-22 23:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.212 (still bad) 2008-Sep-22 23:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.189 (still bad) 2008-Sep-22 23:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.155 (still bad) 2008-Sep-22 23:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-22 23:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-22 23:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-22 23:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:34:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:34:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 0.970 0.947 0.922 2008-Sep-22 23:34:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.007 1.129 1.073 2008-Sep-22 23:34:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.940 0.908 1.083 2008-Sep-22 23:34:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.094 0.910 0.104 2008-Sep-22 23:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-22 23:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-22 23:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-22 23:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-22 23:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:35:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:35:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:35:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:35:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:35:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:35:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.962 0.945 0.922 2008-Sep-22 23:35:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.006 1.123 1.067 2008-Sep-22 23:35:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.944 0.909 1.084 2008-Sep-22 23:35:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.094 0.909 0.104 2008-Sep-22 23:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:36:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:36:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:36:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:36:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:36:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:37:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 23:37:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 23:37:01 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-Sep-22 23:37:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 23:37:01 LOG5 end_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2008-Sep-22 23:37:01 LOG1 fixed_driftmap: New position: year = 2008.7309624622912 RA = 23:18:58.6 RA/Dec = 23:19:27.0 +10:30:52.3 2008-Sep-22 23:37:01 NOTE fixed_driftmap: Correcting ZA to 7:50:21.4 ... 2008-Sep-22 23:37:01 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8392692728 -CF 2008-Sep-22 23:37:01 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-22 23:37:01 START begin_task: Starting task 'WAPP calibration' 2008-Sep-22 23:37:01 LOG5 begin_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2008-Sep-22 23:37:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-22 23:37:01 START begin_task: Starting task 'selecting calibration type' 2008-Sep-22 23:37:01 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Sep-22 23:37:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-22 23:37:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-22 23:37:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 23:37:01 START begin_task: Starting task 'waiting on setcal' 2008-Sep-22 23:37:01 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2008-Sep-22 23:37:01 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8392692728 -CF 2008-Sep-22 23:37:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:37:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-22 23:37:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 23:37:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:37:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 23:37:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-22 23:37:01 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2008-Sep-22 23:37:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-22 23:37:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 23:37:01 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-22 23:37:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 23:37:01 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Sep-22 23:37:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:37:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:37:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.964 0.952 0.928 2008-Sep-22 23:37:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.005 1.122 1.067 2008-Sep-22 23:37:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.942 0.908 1.085 2008-Sep-22 23:37:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.094 0.910 0.104 2008-Sep-22 23:37:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 23:37:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 23:37:02 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Sep-22 23:37:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 23:37:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-22 23:37:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 23:37:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 23:37:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 23:37:02 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Sep-22 23:37:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 23:37:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 23:37:02 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Sep-22 23:37:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 23:37:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 23:37:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-22 23:37:02 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Sep-22 23:37:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-22 23:37:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-22 23:37:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-22 23:37:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 23:37:02 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2008-Sep-22 23:37:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 23:37:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-22 23:37:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 23:37:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 23:37:02 LOG5 end_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2008-Sep-22 23:37:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-22 23:37:02 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-22 23:37:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 23:37:02 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Sep-22 23:37:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 23:37:02 INFO2 take_data: Starting WAPP scan: 826600118 2008-Sep-22 23:37:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-22 23:37:02 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 23:37:02 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Sep-22 23:37:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 23:37:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13023.00 2008-Sep-22 23:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 23:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 23:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 23:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 23:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 23:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 23:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 23:37:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 23:37:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 23:37:04 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Sep-22 23:37:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 23:37:04 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Sep-22 23:37:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-22 23:37:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 23:37:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 23:37:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 23:37:04 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Sep-22 23:37:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 23:37:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 23:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.559 (still bad) 2008-Sep-22 23:37:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 23:37:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 23:37:05 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Sep-22 23:37:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-22 23:37:05 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-22 23:37:05 LOG5 finish_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2008-Sep-22 23:37:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-22 23:37:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 23:37:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-22 23:37:05 LOG5 end_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2008-Sep-22 23:37:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2008-Sep-22 23:37:05 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2008-Sep-22 23:37:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 23:37:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 23:37:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 23:37:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 23:37:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-22 23:37:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-22 23:37:05 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-22 23:37:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 23:37:05 LOG5 begin_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2008-Sep-22 23:37:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 23:37:05 INFO2 take_data: Starting WAPP scan: 826600119 2008-Sep-22 23:37:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-22 23:37:05 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 23:37:05 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Sep-22 23:37:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 23:37:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 23:37:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13026.00 2008-Sep-22 23:37:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20080922.a2010.0031.fits 2008-Sep-22 23:37:05 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080922.a2010.0031.fits} 2008-Sep-22 23:37:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 23:37:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 23:37:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 23:37:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 23:37:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 23:37:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:37:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:37:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 23:37:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 23:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:37:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:37:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-22 23:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-22 23:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:38:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:38:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.961 0.947 0.923 2008-Sep-22 23:38:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.007 1.128 1.071 2008-Sep-22 23:38:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.922 0.937 0.910 1.082 2008-Sep-22 23:38:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.094 0.907 0.104 2008-Sep-22 23:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:38:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:39:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:39:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.963 0.945 0.921 2008-Sep-22 23:39:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.007 1.122 1.068 2008-Sep-22 23:39:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.922 0.941 0.908 1.084 2008-Sep-22 23:39:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.094 0.907 0.104 2008-Sep-22 23:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:39:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:39:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.120 (still bad) 2008-Sep-22 23:40:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:40:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.964 0.947 0.922 2008-Sep-22 23:40:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.003 1.123 1.067 2008-Sep-22 23:40:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.938 0.908 1.087 2008-Sep-22 23:40:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.094 0.908 0.104 2008-Sep-22 23:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:40:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.121 (still bad) 2008-Sep-22 23:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:41:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:41:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.968 0.947 0.921 2008-Sep-22 23:41:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.006 1.123 1.068 2008-Sep-22 23:41:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.939 0.907 1.082 2008-Sep-22 23:41:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.094 0.909 0.104 2008-Sep-22 23:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:41:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:41:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:42:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:42:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.964 0.945 0.919 2008-Sep-22 23:42:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.003 1.124 1.067 2008-Sep-22 23:42:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.938 0.906 1.081 2008-Sep-22 23:42:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.094 0.908 0.104 2008-Sep-22 23:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:43:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:43:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.967 0.947 0.919 2008-Sep-22 23:43:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.005 1.125 1.069 2008-Sep-22 23:43:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.933 0.904 1.082 2008-Sep-22 23:43:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.094 0.909 0.104 2008-Sep-22 23:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:43:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:44:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:44:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.965 0.945 0.921 2008-Sep-22 23:44:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.008 1.125 1.068 2008-Sep-22 23:44:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.936 0.907 1.081 2008-Sep-22 23:44:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.094 0.908 0.104 2008-Sep-22 23:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-22 23:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:44:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:45:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:45:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:45:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.965 0.948 0.920 2008-Sep-22 23:45:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.005 1.123 1.067 2008-Sep-22 23:45:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.939 0.907 1.085 2008-Sep-22 23:45:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.094 0.908 0.104 2008-Sep-22 23:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:46:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:46:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:46:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.966 0.948 0.920 2008-Sep-22 23:46:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.006 1.125 1.067 2008-Sep-22 23:46:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.926 0.942 0.907 1.082 2008-Sep-22 23:46:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.094 0.912 0.104 2008-Sep-22 23:46:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:46:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:46:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:47:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 23:47:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 23:47:06 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Sep-22 23:47:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 23:47:06 LOG5 end_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2008-Sep-22 23:47:06 LOG1 fixed_driftmap: New position: year = 2008.7309816335844 RA = 23:29:05.2 RA/Dec = 23:29:33.6 +10:30:53.7 2008-Sep-22 23:47:06 NOTE fixed_driftmap: Correcting ZA to 7:50:20.0 ... 2008-Sep-22 23:47:06 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8388815081 -CF 2008-Sep-22 23:47:06 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-22 23:47:06 START begin_task: Starting task 'WAPP calibration' 2008-Sep-22 23:47:06 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2008-Sep-22 23:47:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-22 23:47:06 START begin_task: Starting task 'selecting calibration type' 2008-Sep-22 23:47:06 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Sep-22 23:47:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-22 23:47:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-22 23:47:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 23:47:06 START begin_task: Starting task 'waiting on setcal' 2008-Sep-22 23:47:06 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2008-Sep-22 23:47:06 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8388815081 -CF 2008-Sep-22 23:47:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:47:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-22 23:47:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 23:47:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:47:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 23:47:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-22 23:47:07 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2008-Sep-22 23:47:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-22 23:47:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 23:47:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-22 23:47:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 23:47:07 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Sep-22 23:47:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:47:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 23:47:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 23:47:07 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Sep-22 23:47:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 23:47:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-22 23:47:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 23:47:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 23:47:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 23:47:07 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-Sep-22 23:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:47:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 23:47:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 23:47:07 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-Sep-22 23:47:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 23:47:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 23:47:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-22 23:47:07 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Sep-22 23:47:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-22 23:47:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-22 23:47:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-22 23:47:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 23:47:07 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2008-Sep-22 23:47:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 23:47:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-22 23:47:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 23:47:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 23:47:07 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2008-Sep-22 23:47:07 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-22 23:47:07 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-22 23:47:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 23:47:07 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Sep-22 23:47:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 23:47:07 INFO2 take_data: Starting WAPP scan: 826600120 2008-Sep-22 23:47:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-22 23:47:07 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 23:47:07 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2008-Sep-22 23:47:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 23:47:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13628.00 2008-Sep-22 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 23:47:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 23:47:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 23:47:09 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2008-Sep-22 23:47:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 23:47:09 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Sep-22 23:47:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-22 23:47:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 23:47:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 23:47:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 23:47:09 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Sep-22 23:47:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 23:47:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 23:47:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 23:47:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 23:47:09 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Sep-22 23:47:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-22 23:47:09 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-22 23:47:09 LOG5 finish_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2008-Sep-22 23:47:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-22 23:47:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 23:47:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-22 23:47:09 LOG5 end_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2008-Sep-22 23:47:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2008-Sep-22 23:47:09 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2008-Sep-22 23:47:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 23:47:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 23:47:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 23:47:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 23:47:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-22 23:47:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-22 23:47:10 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-22 23:47:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 23:47:10 LOG5 begin_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2008-Sep-22 23:47:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 23:47:10 INFO2 take_data: Starting WAPP scan: 826600121 2008-Sep-22 23:47:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-22 23:47:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 23:47:10 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Sep-22 23:47:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 23:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.466 (still bad) 2008-Sep-22 23:47:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 23:47:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13631.00 2008-Sep-22 23:47:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20080922.a2010.0032.fits 2008-Sep-22 23:47:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080922.a2010.0032.fits} 2008-Sep-22 23:47:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 23:47:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 23:47:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 23:47:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 23:47:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 23:47:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:47:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:47:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 23:47:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 23:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.457 (still bad) 2008-Sep-22 23:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:47:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:47:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.966 0.948 0.922 2008-Sep-22 23:47:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.006 1.125 1.066 2008-Sep-22 23:47:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.942 0.910 1.082 2008-Sep-22 23:47:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.919 0.104 2008-Sep-22 23:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:47:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-22 23:47:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-22 23:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-22 23:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-22 23:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:48:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:48:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.968 0.949 0.923 2008-Sep-22 23:48:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.007 1.127 1.069 2008-Sep-22 23:48:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.950 0.910 1.083 2008-Sep-22 23:48:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.094 0.911 0.104 2008-Sep-22 23:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-22 23:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-22 23:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-22 23:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-22 23:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-22 23:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-22 23:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-22 23:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:49:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:49:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:49:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.970 0.950 0.922 2008-Sep-22 23:49:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 1.010 1.130 1.067 2008-Sep-22 23:49:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.927 0.937 0.912 1.083 2008-Sep-22 23:49:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.094 0.911 0.104 2008-Sep-22 23:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-22 23:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-22 23:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-22 23:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-22 23:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-22 23:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-22 23:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-22 23:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:49:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:50:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:50:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.968 0.958 0.930 2008-Sep-22 23:50:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.011 1.127 1.068 2008-Sep-22 23:50:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.944 0.913 1.084 2008-Sep-22 23:50:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.914 0.104 2008-Sep-22 23:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:50:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:51:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:51:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.969 0.953 0.925 2008-Sep-22 23:51:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.011 1.127 1.070 2008-Sep-22 23:51:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.940 0.910 1.083 2008-Sep-22 23:51:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.094 0.913 0.104 2008-Sep-22 23:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:52:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:52:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:52:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.973 0.953 0.926 2008-Sep-22 23:52:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.009 1.126 1.070 2008-Sep-22 23:52:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.928 0.943 0.911 1.084 2008-Sep-22 23:52:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.914 0.104 2008-Sep-22 23:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:52:29 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 23:52:29.300 (seconds: 85949.300)!} 2008-Sep-22 23:52:29 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 23:52:29.300 (seconds: 85949.300)! 2008-Sep-22 23:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:52:30 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 85948.0 to 85949.0! 2008-Sep-22 23:52:31 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (85948.0 - 85950.0)! 2008-Sep-22 23:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:52:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-22 23:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:53:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:53:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.971 0.954 0.928 2008-Sep-22 23:53:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.010 1.128 1.069 2008-Sep-22 23:53:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.928 0.942 0.911 1.083 2008-Sep-22 23:53:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.913 0.104 2008-Sep-22 23:53:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:54:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:54:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:54:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.970 0.954 0.928 2008-Sep-22 23:54:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.010 1.131 1.068 2008-Sep-22 23:54:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.927 0.942 0.913 1.085 2008-Sep-22 23:54:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.915 0.104 2008-Sep-22 23:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:55:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-22 23:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:55:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:55:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.971 0.951 0.924 2008-Sep-22 23:55:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.009 1.129 1.068 2008-Sep-22 23:55:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.929 0.944 0.911 1.085 2008-Sep-22 23:55:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.094 0.915 0.104 2008-Sep-22 23:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-22 23:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-22 23:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-22 23:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-22 23:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-22 23:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:56:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:56:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.971 0.952 0.922 2008-Sep-22 23:56:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 1.010 1.129 1.068 2008-Sep-22 23:56:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.929 0.941 0.909 1.084 2008-Sep-22 23:56:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.913 0.104 2008-Sep-22 23:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:56:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-22 23:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:56:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-22 23:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:57:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 23:57:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-22 23:57:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 23:57:11 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Sep-22 23:57:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 23:57:11 LOG5 end_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2008-Sep-22 23:57:11 LOG1 fixed_driftmap: New position: year = 2008.7310008048776 RA = 23:39:11.7 RA/Dec = 23:39:40.3 +10:30:54.8 2008-Sep-22 23:57:11 NOTE fixed_driftmap: Correcting ZA to 7:50:18.9 ... 2008-Sep-22 23:57:11 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8385897983 -CF 2008-Sep-22 23:57:11 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-22 23:57:11 START begin_task: Starting task 'WAPP calibration' 2008-Sep-22 23:57:11 LOG5 begin_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2008-Sep-22 23:57:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-22 23:57:11 START begin_task: Starting task 'selecting calibration type' 2008-Sep-22 23:57:11 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2008-Sep-22 23:57:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-22 23:57:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-22 23:57:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 23:57:11 START begin_task: Starting task 'waiting on setcal' 2008-Sep-22 23:57:11 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2008-Sep-22 23:57:11 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8385897983 -CF 2008-Sep-22 23:57:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:57:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-22 23:57:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-22 23:57:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:57:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-22 23:57:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-22 23:57:11 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2008-Sep-22 23:57:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-22 23:57:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 23:57:11 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-22 23:57:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 23:57:11 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Sep-22 23:57:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-22 23:57:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 23:57:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 23:57:12 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Sep-22 23:57:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 23:57:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-22 23:57:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-22 23:57:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-22 23:57:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-22 23:57:12 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Sep-22 23:57:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-22 23:57:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-22 23:57:12 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Sep-22 23:57:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-22 23:57:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-22 23:57:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-22 23:57:12 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2008-Sep-22 23:57:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-22 23:57:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-22 23:57:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-22 23:57:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 23:57:12 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-Sep-22 23:57:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 23:57:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-22 23:57:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 23:57:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 23:57:12 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-Sep-22 23:57:12 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-22 23:57:12 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-22 23:57:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 23:57:12 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Sep-22 23:57:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 23:57:12 INFO2 take_data: Starting WAPP scan: 826600122 2008-Sep-22 23:57:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-22 23:57:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 23:57:12 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2008-Sep-22 23:57:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 23:57:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14233.00 2008-Sep-22 23:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 23:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 23:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 23:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 23:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 23:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 23:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 23:57:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-22 23:57:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-22 23:57:14 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2008-Sep-22 23:57:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-22 23:57:14 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Sep-22 23:57:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-22 23:57:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-22 23:57:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-22 23:57:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-22 23:57:14 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Sep-22 23:57:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-22 23:57:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-22 23:57:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-22 23:57:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-22 23:57:15 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Sep-22 23:57:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-22 23:57:15 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-22 23:57:15 LOG5 finish_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2008-Sep-22 23:57:15 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-22 23:57:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-22 23:57:15 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-22 23:57:15 LOG5 end_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2008-Sep-22 23:57:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2008-Sep-22 23:57:15 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2008-Sep-22 23:57:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-22 23:57:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-22 23:57:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-22 23:57:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-22 23:57:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-22 23:57:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-22 23:57:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-22 23:57:15 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-22 23:57:15 LOG5 begin_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2008-Sep-22 23:57:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-22 23:57:15 INFO2 take_data: Starting WAPP scan: 826600123 2008-Sep-22 23:57:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-22 23:57:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-22 23:57:15 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Sep-22 23:57:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-22 23:57:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-22 23:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.569 (still bad) 2008-Sep-22 23:57:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14236.00 2008-Sep-22 23:57:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20080922.a2010.0033.fits 2008-Sep-22 23:57:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080922.a2010.0033.fits} 2008-Sep-22 23:57:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-22 23:57:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-22 23:57:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-22 23:57:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-22 23:57:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-22 23:57:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:57:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-22 23:57:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-22 23:57:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-22 23:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:57:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:57:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.970 0.954 0.923 2008-Sep-22 23:57:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.010 1.129 1.068 2008-Sep-22 23:57:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.928 0.938 0.912 1.084 2008-Sep-22 23:57:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.912 0.104 2008-Sep-22 23:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-22 23:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-22 23:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:58:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:58:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.967 0.954 0.924 2008-Sep-22 23:58:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.007 1.131 1.070 2008-Sep-22 23:58:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.940 0.913 1.085 2008-Sep-22 23:58:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.094 0.910 0.104 2008-Sep-22 23:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:59:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-22 23:59:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.975 0.952 0.926 2008-Sep-22 23:59:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.008 1.129 1.069 2008-Sep-22 23:59:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.941 0.913 1.088 2008-Sep-22 23:59:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 0.094 0.913 0.104 2008-Sep-22 23:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-22 23:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-22 23:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-22 23:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-22 23:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:00:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:00:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.972 0.968 0.939 2008-Sep-23 00:00:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.011 1.131 1.072 2008-Sep-23 00:00:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.941 0.912 1.086 2008-Sep-23 00:00:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.913 0.104 2008-Sep-23 00:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:01:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:01:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:01:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:01:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.971 0.954 0.924 2008-Sep-23 00:01:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.009 1.130 1.071 2008-Sep-23 00:01:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.945 0.915 1.090 2008-Sep-23 00:01:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.094 0.914 0.105 2008-Sep-23 00:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.132 (still bad) 2008-Sep-23 00:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.129 (still bad) 2008-Sep-23 00:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:02:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:02:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.970 0.954 0.926 2008-Sep-23 00:02:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.009 1.131 1.070 2008-Sep-23 00:02:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.941 0.916 1.086 2008-Sep-23 00:02:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.914 0.105 2008-Sep-23 00:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.131 (still bad) 2008-Sep-23 00:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.131 (still bad) 2008-Sep-23 00:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.133 (still bad) 2008-Sep-23 00:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.131 (still bad) 2008-Sep-23 00:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.130 (still bad) 2008-Sep-23 00:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.129 (still bad) 2008-Sep-23 00:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.130 (still bad) 2008-Sep-23 00:03:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.131 (still bad) 2008-Sep-23 00:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.132 (still bad) 2008-Sep-23 00:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.130 (still bad) 2008-Sep-23 00:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:03:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 00:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:03:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 00:03:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.971 0.955 0.925 2008-Sep-23 00:03:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.011 1.130 1.070 2008-Sep-23 00:03:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.940 0.916 1.086 2008-Sep-23 00:03:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.095 0.916 0.105 2008-Sep-23 00:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.130 (still bad) 2008-Sep-23 00:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.131 (still bad) 2008-Sep-23 00:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.129 (still bad) 2008-Sep-23 00:04:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 00:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:04:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:04:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.972 0.957 0.928 2008-Sep-23 00:04:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.011 1.129 1.070 2008-Sep-23 00:04:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.939 0.917 1.088 2008-Sep-23 00:04:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.916 0.105 2008-Sep-23 00:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:04:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 00:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:04:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:05:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:05:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.971 0.954 0.929 2008-Sep-23 00:05:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.012 1.127 1.070 2008-Sep-23 00:05:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.945 0.913 1.088 2008-Sep-23 00:05:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.916 0.105 2008-Sep-23 00:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:06:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:06:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:06:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.972 0.954 0.929 2008-Sep-23 00:06:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.012 1.132 1.069 2008-Sep-23 00:06:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.948 0.917 1.089 2008-Sep-23 00:06:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.917 0.104 2008-Sep-23 00:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:07:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:07:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 00:07:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 00:07:16 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Sep-23 00:07:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 00:07:16 LOG5 end_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2008-Sep-23 00:07:16 LOG1 fixed_driftmap: New position: year = 2008.7310199761705 RA = 23:49:18.3 RA/Dec = 23:49:46.9 +10:30:55.5 2008-Sep-23 00:07:16 NOTE fixed_driftmap: Correcting ZA to 7:50:18.2 ... 2008-Sep-23 00:07:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8383947126 -CF 2008-Sep-23 00:07:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 00:07:16 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 00:07:16 LOG5 begin_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2008-Sep-23 00:07:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 00:07:16 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 00:07:16 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Sep-23 00:07:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 00:07:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 00:07:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 00:07:16 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 00:07:16 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Sep-23 00:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:07:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8383947126 -CF 2008-Sep-23 00:07:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:07:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 00:07:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 00:07:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:07:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 00:07:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 00:07:17 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Sep-23 00:07:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 00:07:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 00:07:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 00:07:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 00:07:17 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Sep-23 00:07:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:07:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 00:07:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 00:07:17 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Sep-23 00:07:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 00:07:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 00:07:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 00:07:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 00:07:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 00:07:17 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Sep-23 00:07:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 00:07:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 00:07:17 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Sep-23 00:07:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 00:07:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 00:07:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 00:07:17 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Sep-23 00:07:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 00:07:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 00:07:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 00:07:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 00:07:17 LOG5 begin_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Sep-23 00:07:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 00:07:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 00:07:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 00:07:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 00:07:17 LOG5 end_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Sep-23 00:07:17 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 00:07:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 00:07:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 00:07:17 LOG5 begin_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2008-Sep-23 00:07:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 00:07:17 INFO2 take_data: Starting WAPP scan: 826700001 2008-Sep-23 00:07:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 00:07:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 00:07:17 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-Sep-23 00:07:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 00:07:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14838.00 2008-Sep-23 00:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 00:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 00:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 00:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 00:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 00:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 00:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 00:07:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 00:07:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 00:07:19 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-Sep-23 00:07:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 00:07:19 LOG5 end_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2008-Sep-23 00:07:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 00:07:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 00:07:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 00:07:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 00:07:19 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Sep-23 00:07:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 00:07:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 00:07:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 00:07:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 00:07:19 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Sep-23 00:07:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 00:07:19 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 00:07:19 LOG5 finish_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2008-Sep-23 00:07:19 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 00:07:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 00:07:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 00:07:19 LOG5 end_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2008-Sep-23 00:07:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2008-Sep-23 00:07:20 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2008-Sep-23 00:07:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 00:07:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 00:07:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 00:07:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 00:07:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 00:07:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 00:07:20 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 00:07:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 00:07:20 LOG5 begin_task: Level: (2) ID = <10262> Status = 0 0 0 0 ok 2008-Sep-23 00:07:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 00:07:20 INFO2 take_data: Starting WAPP scan: 826700002 2008-Sep-23 00:07:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 00:07:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 00:07:20 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2008-Sep-23 00:07:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 00:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.572 (still bad) 2008-Sep-23 00:07:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 00:07:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14841.00 2008-Sep-23 00:07:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0000.fits 2008-Sep-23 00:07:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0000.fits} 2008-Sep-23 00:07:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 00:07:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 00:07:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 00:07:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 00:07:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 00:07:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:07:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:07:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 00:07:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 00:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:07:28 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 00:07:28.300 (seconds: 448.300)!} 2008-Sep-23 00:07:28 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 00:07:28.300 (seconds: 448.300)! 2008-Sep-23 00:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:07:29 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 447.0 to 448.0! 2008-Sep-23 00:07:30 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (447.0 - 449.0)! 2008-Sep-23 00:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:07:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:07:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 00:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:07:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:07:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.973 0.952 0.926 2008-Sep-23 00:07:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.011 1.131 1.070 2008-Sep-23 00:07:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.953 0.913 1.088 2008-Sep-23 00:07:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.915 0.104 2008-Sep-23 00:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:07:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 00:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 00:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 00:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:08:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:08:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.973 0.950 0.925 2008-Sep-23 00:08:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.012 1.131 1.069 2008-Sep-23 00:08:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.941 0.917 1.087 2008-Sep-23 00:08:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.917 0.104 2008-Sep-23 00:08:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 00:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:09:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 00:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 00:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 00:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 00:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 00:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 00:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 00:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:09:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:09:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.969 0.957 0.930 2008-Sep-23 00:09:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.011 1.132 1.072 2008-Sep-23 00:09:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.944 0.917 1.085 2008-Sep-23 00:09:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.913 0.104 2008-Sep-23 00:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:10:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:10:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.967 0.955 0.927 2008-Sep-23 00:10:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.010 1.130 1.069 2008-Sep-23 00:10:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.943 0.915 1.085 2008-Sep-23 00:10:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 0.094 0.913 0.104 2008-Sep-23 00:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:11:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:11:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 00:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:11:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:11:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.975 0.949 0.925 2008-Sep-23 00:11:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.009 1.128 1.070 2008-Sep-23 00:11:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.928 0.941 0.915 1.086 2008-Sep-23 00:11:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.094 0.912 0.104 2008-Sep-23 00:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:12:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:12:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.047 0.968 0.949 0.920 2008-Sep-23 00:12:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.008 1.125 1.067 2008-Sep-23 00:12:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.927 0.941 0.908 1.083 2008-Sep-23 00:12:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.094 0.912 0.104 2008-Sep-23 00:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:13:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:13:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.969 0.948 0.923 2008-Sep-23 00:13:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.008 1.125 1.066 2008-Sep-23 00:13:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.944 0.919 1.097 2008-Sep-23 00:13:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.094 0.912 0.104 2008-Sep-23 00:13:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 00:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:14:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:14:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:14:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 0.967 0.947 0.923 2008-Sep-23 00:14:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.012 1.123 1.066 2008-Sep-23 00:14:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.936 0.910 1.084 2008-Sep-23 00:14:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.094 0.911 0.104 2008-Sep-23 00:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-23 00:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-23 00:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:15:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 00:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:15:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:15:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.966 0.948 0.923 2008-Sep-23 00:15:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.007 1.126 1.065 2008-Sep-23 00:15:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.922 0.939 0.910 1.083 2008-Sep-23 00:15:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.094 0.911 0.104 2008-Sep-23 00:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-23 00:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-23 00:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-23 00:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:16:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:16:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.965 0.946 0.920 2008-Sep-23 00:16:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.005 1.127 1.065 2008-Sep-23 00:16:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.922 0.939 0.909 1.082 2008-Sep-23 00:16:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.094 0.910 0.104 2008-Sep-23 00:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:17:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 00:17:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 00:17:21 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2008-Sep-23 00:17:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 00:17:21 LOG5 end_task: Level: (2) ID = <10262> Status = 0 0 0 0 ok 2008-Sep-23 00:17:21 LOG1 fixed_driftmap: New position: year = 2008.7310391474637 RA = 23:59:24.8 RA/Dec = 23:59:53.6 +10:30:55.8 2008-Sep-23 00:17:21 NOTE fixed_driftmap: Correcting ZA to 7:50:17.9 ... 2008-Sep-23 00:17:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8382966326 -CF 2008-Sep-23 00:17:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 00:17:21 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 00:17:21 LOG5 begin_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2008-Sep-23 00:17:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 00:17:21 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 00:17:21 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Sep-23 00:17:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 00:17:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 00:17:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 00:17:21 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 00:17:21 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Sep-23 00:17:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8382966326 -CF 2008-Sep-23 00:17:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:17:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 00:17:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 00:17:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:17:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 00:17:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 00:17:21 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Sep-23 00:17:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 00:17:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 00:17:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 00:17:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 00:17:21 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Sep-23 00:17:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:17:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 00:17:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 00:17:21 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Sep-23 00:17:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 00:17:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 00:17:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 00:17:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 00:17:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 00:17:22 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Sep-23 00:17:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 00:17:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 00:17:22 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Sep-23 00:17:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 00:17:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 00:17:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 00:17:22 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Sep-23 00:17:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 00:17:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 00:17:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 00:17:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 00:17:22 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Sep-23 00:17:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 00:17:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 00:17:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 00:17:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 00:17:22 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Sep-23 00:17:22 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 00:17:22 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 00:17:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 00:17:22 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Sep-23 00:17:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 00:17:22 INFO2 take_data: Starting WAPP scan: 826700003 2008-Sep-23 00:17:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 00:17:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 00:17:22 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Sep-23 00:17:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 00:17:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15443.00 2008-Sep-23 00:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 00:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 00:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 00:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 00:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 00:17:24 LOG3 WAPP=1+2+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 00:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 00:17:24 LOG3 WAPP=3-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:17:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 00:17:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 00:17:24 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Sep-23 00:17:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 00:17:24 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Sep-23 00:17:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 00:17:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 00:17:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 00:17:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 00:17:24 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Sep-23 00:17:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 00:17:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 00:17:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 00:17:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 00:17:25 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Sep-23 00:17:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 00:17:25 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 00:17:25 LOG5 finish_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2008-Sep-23 00:17:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 00:17:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 00:17:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 00:17:25 LOG5 end_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2008-Sep-23 00:17:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2008-Sep-23 00:17:25 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2008-Sep-23 00:17:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 00:17:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 00:17:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 00:17:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 00:17:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 00:17:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 00:17:25 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 00:17:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 00:17:25 LOG5 begin_task: Level: (2) ID = <10273> Status = 0 0 0 0 ok 2008-Sep-23 00:17:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 00:17:25 INFO2 take_data: Starting WAPP scan: 826700004 2008-Sep-23 00:17:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 00:17:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 00:17:25 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Sep-23 00:17:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 00:17:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 00:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.564 (still bad) 2008-Sep-23 00:17:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15446.00 2008-Sep-23 00:17:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0001.fits 2008-Sep-23 00:17:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0001.fits} 2008-Sep-23 00:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 00:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 00:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 00:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 00:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 00:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 00:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 00:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:17:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:17:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:17:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.965 0.946 0.920 2008-Sep-23 00:17:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.005 1.122 1.065 2008-Sep-23 00:17:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.938 0.910 1.082 2008-Sep-23 00:17:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.094 0.912 0.104 2008-Sep-23 00:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-23 00:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-23 00:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:18:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-23 00:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:18:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.122 (still bad) 2008-Sep-23 00:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:19:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:19:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.967 0.962 0.938 2008-Sep-23 00:19:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.008 1.131 1.069 2008-Sep-23 00:19:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.948 0.962 0.911 1.082 2008-Sep-23 00:19:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.913 0.104 2008-Sep-23 00:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 00:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 00:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 00:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 00:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:19:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:20:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:20:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.972 0.950 0.926 2008-Sep-23 00:20:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.006 1.126 1.065 2008-Sep-23 00:20:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.922 0.940 0.910 1.082 2008-Sep-23 00:20:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.094 0.911 0.104 2008-Sep-23 00:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:21:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:21:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.968 0.948 0.922 2008-Sep-23 00:21:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.006 1.125 1.065 2008-Sep-23 00:21:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.937 0.909 1.083 2008-Sep-23 00:21:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.094 0.912 0.104 2008-Sep-23 00:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:21:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 00:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:21:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:22:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:22:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.965 0.949 0.923 2008-Sep-23 00:22:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 1.007 1.123 1.066 2008-Sep-23 00:22:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.926 0.943 0.909 1.084 2008-Sep-23 00:22:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.094 0.912 0.104 2008-Sep-23 00:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:22:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:22:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:23:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:23:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.973 0.946 0.919 2008-Sep-23 00:23:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 1.007 1.126 1.064 2008-Sep-23 00:23:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.929 0.945 0.909 1.083 2008-Sep-23 00:23:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.094 0.911 0.104 2008-Sep-23 00:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 00:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 00:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.151 (still bad) 2008-Sep-23 00:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.152 (still bad) 2008-Sep-23 00:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.153 (still bad) 2008-Sep-23 00:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.150 (still bad) 2008-Sep-23 00:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 00:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:23:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:24:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:24:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.968 0.947 0.921 2008-Sep-23 00:24:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.008 1.126 1.067 2008-Sep-23 00:24:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.946 0.911 1.083 2008-Sep-23 00:24:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.094 0.914 0.104 2008-Sep-23 00:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.123 (still bad) 2008-Sep-23 00:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:25:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:25:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.968 0.949 0.924 2008-Sep-23 00:25:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.009 1.126 1.067 2008-Sep-23 00:25:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.927 0.945 0.921 1.095 2008-Sep-23 00:25:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.913 0.104 2008-Sep-23 00:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.125 (still bad) 2008-Sep-23 00:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.124 (still bad) 2008-Sep-23 00:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.126 (still bad) 2008-Sep-23 00:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 00:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.149 (still bad) 2008-Sep-23 00:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.155 (still bad) 2008-Sep-23 00:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.163 (still bad) 2008-Sep-23 00:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.185 (still bad) 2008-Sep-23 00:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.199 (still bad) 2008-Sep-23 00:25:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.195 (still bad) 2008-Sep-23 00:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.175 (still bad) 2008-Sep-23 00:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.149 (still bad) 2008-Sep-23 00:25:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 00:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 00:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 00:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:26:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:26:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 0.975 0.951 0.923 2008-Sep-23 00:26:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.139 1.058 1.136 1.076 2008-Sep-23 00:26:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.927 0.943 0.913 1.086 2008-Sep-23 00:26:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.919 0.104 2008-Sep-23 00:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:26:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 00:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:27:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:27:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.970 0.954 0.928 2008-Sep-23 00:27:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.009 1.129 1.068 2008-Sep-23 00:27:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.940 0.918 1.084 2008-Sep-23 00:27:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.918 0.104 2008-Sep-23 00:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:27:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 00:27:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 00:27:26 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Sep-23 00:27:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 00:27:26 LOG5 end_task: Level: (2) ID = <10273> Status = 0 0 0 0 ok 2008-Sep-23 00:27:26 LOG1 fixed_driftmap: New position: year = 2008.7310583187568 RA = 00:09:31.4 RA/Dec = 00:10:00.3 +10:30:55.8 2008-Sep-23 00:27:26 NOTE fixed_driftmap: Correcting ZA to 7:50:17.9 ... 2008-Sep-23 00:27:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8382957491 -CF 2008-Sep-23 00:27:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 00:27:26 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 00:27:26 LOG5 begin_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2008-Sep-23 00:27:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 00:27:26 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 00:27:26 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Sep-23 00:27:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 00:27:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 00:27:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 00:27:26 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 00:27:26 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Sep-23 00:27:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8382957491 -CF 2008-Sep-23 00:27:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:27:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 00:27:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 00:27:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:27:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 00:27:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 00:27:27 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Sep-23 00:27:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 00:27:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 00:27:27 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 00:27:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 00:27:27 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Sep-23 00:27:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:27:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 00:27:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 00:27:27 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Sep-23 00:27:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 00:27:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 00:27:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 00:27:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 00:27:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 00:27:27 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Sep-23 00:27:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 00:27:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 00:27:27 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Sep-23 00:27:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 00:27:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 00:27:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 00:27:27 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Sep-23 00:27:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 00:27:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 00:27:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 00:27:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 00:27:27 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Sep-23 00:27:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 00:27:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 00:27:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 00:27:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 00:27:27 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Sep-23 00:27:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 00:27:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 00:27:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 00:27:27 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Sep-23 00:27:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 00:27:27 INFO2 take_data: Starting WAPP scan: 826700005 2008-Sep-23 00:27:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 00:27:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 00:27:27 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Sep-23 00:27:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 00:27:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16048.00 2008-Sep-23 00:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 00:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 00:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 00:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 00:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 00:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 00:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 00:27:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 00:27:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 00:27:29 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Sep-23 00:27:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 00:27:29 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Sep-23 00:27:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 00:27:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 00:27:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 00:27:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 00:27:29 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Sep-23 00:27:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 00:27:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 00:27:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 00:27:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 00:27:29 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Sep-23 00:27:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 00:27:29 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 00:27:29 LOG5 finish_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2008-Sep-23 00:27:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 00:27:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 00:27:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 00:27:29 LOG5 end_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2008-Sep-23 00:27:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2008-Sep-23 00:27:30 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2008-Sep-23 00:27:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 00:27:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 00:27:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 00:27:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 00:27:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 00:27:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 00:27:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 00:27:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 00:27:30 LOG5 begin_task: Level: (2) ID = <10284> Status = 0 0 0 0 ok 2008-Sep-23 00:27:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 00:27:30 INFO2 take_data: Starting WAPP scan: 826700006 2008-Sep-23 00:27:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 00:27:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 00:27:30 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Sep-23 00:27:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 00:27:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 00:27:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16051.00 2008-Sep-23 00:27:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0002.fits 2008-Sep-23 00:27:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0002.fits} 2008-Sep-23 00:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.566 (still bad) 2008-Sep-23 00:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 00:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 00:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 00:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 00:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 00:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 00:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 00:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:28:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:28:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:28:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.971 0.952 0.923 2008-Sep-23 00:28:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.009 1.129 1.069 2008-Sep-23 00:28:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.928 0.944 0.915 1.088 2008-Sep-23 00:28:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 0.094 0.912 0.104 2008-Sep-23 00:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:28:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:28:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:29:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 00:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:29:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:29:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 0.992 0.950 0.924 2008-Sep-23 00:29:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.008 1.128 1.069 2008-Sep-23 00:29:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.929 0.945 0.912 1.086 2008-Sep-23 00:29:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.094 0.915 0.104 2008-Sep-23 00:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.125 (still bad) 2008-Sep-23 00:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:29:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:29:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:30:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:30:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.967 0.951 0.922 2008-Sep-23 00:30:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.009 1.131 1.071 2008-Sep-23 00:30:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.928 0.944 0.914 1.086 2008-Sep-23 00:30:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.917 0.104 2008-Sep-23 00:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:30:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 00:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:31:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:31:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.971 0.951 0.924 2008-Sep-23 00:31:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.007 1.131 1.068 2008-Sep-23 00:31:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.928 0.944 0.922 1.094 2008-Sep-23 00:31:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.094 0.915 0.104 2008-Sep-23 00:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:31:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:32:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:32:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.969 0.951 0.926 2008-Sep-23 00:32:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.008 1.134 1.068 2008-Sep-23 00:32:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.943 0.917 1.088 2008-Sep-23 00:32:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.915 0.104 2008-Sep-23 00:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:32:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 00:32:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 00:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:33:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 00:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:33:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:33:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 0.973 0.952 0.926 2008-Sep-23 00:33:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.008 1.133 1.070 2008-Sep-23 00:33:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.944 0.917 1.086 2008-Sep-23 00:33:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.094 0.914 0.104 2008-Sep-23 00:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:34:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:34:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:34:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.973 0.962 0.935 2008-Sep-23 00:34:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.013 1.132 1.069 2008-Sep-23 00:34:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.944 0.918 1.084 2008-Sep-23 00:34:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.915 0.104 2008-Sep-23 00:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:34:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:35:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:35:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:35:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 0.970 0.951 0.928 2008-Sep-23 00:35:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.010 1.137 1.068 2008-Sep-23 00:35:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.942 0.923 1.086 2008-Sep-23 00:35:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.916 0.104 2008-Sep-23 00:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:36:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:36:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:36:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.970 0.953 0.928 2008-Sep-23 00:36:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.008 1.134 1.068 2008-Sep-23 00:36:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.947 0.920 1.087 2008-Sep-23 00:36:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.916 0.104 2008-Sep-23 00:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:36:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:36:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:36:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 00:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:37:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:37:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.973 0.954 0.929 2008-Sep-23 00:37:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.013 1.136 1.069 2008-Sep-23 00:37:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.944 0.920 1.088 2008-Sep-23 00:37:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.917 0.104 2008-Sep-23 00:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:37:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 00:37:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 00:37:31 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Sep-23 00:37:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 00:37:31 LOG5 end_task: Level: (2) ID = <10284> Status = 0 0 0 0 ok 2008-Sep-23 00:37:31 LOG1 fixed_driftmap: New position: year = 2008.73107749005 RA = 00:19:38.0 RA/Dec = 00:20:06.9 +10:30:55.5 2008-Sep-23 00:37:31 NOTE fixed_driftmap: Correcting ZA to 7:50:18.2 ... 2008-Sep-23 00:37:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8383920652 -CF 2008-Sep-23 00:37:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 00:37:31 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 00:37:31 LOG5 begin_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2008-Sep-23 00:37:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 00:37:31 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 00:37:31 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Sep-23 00:37:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 00:37:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 00:37:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 00:37:31 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 00:37:31 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Sep-23 00:37:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8383920652 -CF 2008-Sep-23 00:37:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:37:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 00:37:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 00:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:37:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:37:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 00:37:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 00:37:31 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Sep-23 00:37:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 00:37:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 00:37:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 00:37:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 00:37:32 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Sep-23 00:37:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:37:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 00:37:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 00:37:32 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Sep-23 00:37:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 00:37:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 00:37:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 00:37:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 00:37:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 00:37:32 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2008-Sep-23 00:37:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 00:37:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 00:37:32 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2008-Sep-23 00:37:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 00:37:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 00:37:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 00:37:32 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Sep-23 00:37:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 00:37:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 00:37:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 00:37:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 00:37:32 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Sep-23 00:37:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 00:37:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 00:37:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 00:37:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 00:37:32 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Sep-23 00:37:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 00:37:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 00:37:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 00:37:32 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Sep-23 00:37:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 00:37:32 INFO2 take_data: Starting WAPP scan: 826700007 2008-Sep-23 00:37:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 00:37:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 00:37:32 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Sep-23 00:37:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 00:37:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16653.00 2008-Sep-23 00:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 00:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 00:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 00:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 00:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 00:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 00:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 00:37:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 00:37:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 00:37:34 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Sep-23 00:37:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 00:37:34 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Sep-23 00:37:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 00:37:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 00:37:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 00:37:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 00:37:34 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Sep-23 00:37:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 00:37:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 00:37:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 00:37:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 00:37:34 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Sep-23 00:37:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 00:37:34 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 00:37:34 LOG5 finish_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2008-Sep-23 00:37:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 00:37:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 00:37:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 00:37:34 LOG5 end_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2008-Sep-23 00:37:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2008-Sep-23 00:37:34 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2008-Sep-23 00:37:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 00:37:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 00:37:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 00:37:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 00:37:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 00:37:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 00:37:35 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 00:37:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 00:37:35 LOG5 begin_task: Level: (2) ID = <10295> Status = 0 0 0 0 ok 2008-Sep-23 00:37:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 00:37:35 INFO2 take_data: Starting WAPP scan: 826700008 2008-Sep-23 00:37:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 00:37:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 00:37:35 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2008-Sep-23 00:37:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 00:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.572 (still bad) 2008-Sep-23 00:37:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 00:37:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16656.00 2008-Sep-23 00:37:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0003.fits 2008-Sep-23 00:37:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0003.fits} 2008-Sep-23 00:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 00:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 00:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 00:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 00:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 00:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 00:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 00:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:37:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:37:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 00:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 00:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:38:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:38:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:38:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 0.972 0.954 0.928 2008-Sep-23 00:38:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.010 1.143 1.080 2008-Sep-23 00:38:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.946 0.917 1.088 2008-Sep-23 00:38:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.916 0.104 2008-Sep-23 00:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 00:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 00:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 00:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 00:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:39:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:39:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 00:39:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:39:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.974 0.953 0.926 2008-Sep-23 00:39:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.013 1.132 1.068 2008-Sep-23 00:39:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.946 0.917 1.088 2008-Sep-23 00:39:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.917 0.104 2008-Sep-23 00:39:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:39:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:40:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:40:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:40:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.974 0.953 0.924 2008-Sep-23 00:40:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.017 1.134 1.069 2008-Sep-23 00:40:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.942 0.915 1.086 2008-Sep-23 00:40:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.094 0.914 0.104 2008-Sep-23 00:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:40:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:41:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 00:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:41:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:41:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.968 0.953 0.925 2008-Sep-23 00:41:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.005 1.132 1.069 2008-Sep-23 00:41:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.943 0.916 1.086 2008-Sep-23 00:41:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.914 0.104 2008-Sep-23 00:41:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 00:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:41:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 00:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:42:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:42:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:42:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.970 0.953 0.924 2008-Sep-23 00:42:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.009 1.130 1.068 2008-Sep-23 00:42:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.929 0.943 0.916 1.084 2008-Sep-23 00:42:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.094 0.914 0.104 2008-Sep-23 00:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:42:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:43:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:43:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.966 0.951 0.923 2008-Sep-23 00:43:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 1.012 1.131 1.067 2008-Sep-23 00:43:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.928 0.942 0.916 1.085 2008-Sep-23 00:43:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.913 0.104 2008-Sep-23 00:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:43:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:44:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:44:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.968 0.952 0.925 2008-Sep-23 00:44:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.009 1.131 1.067 2008-Sep-23 00:44:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.928 0.944 0.918 1.087 2008-Sep-23 00:44:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.094 0.931 0.104 2008-Sep-23 00:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:45:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:45:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.971 0.951 0.923 2008-Sep-23 00:45:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.013 1.128 1.067 2008-Sep-23 00:45:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.928 0.937 0.915 1.085 2008-Sep-23 00:45:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.913 0.104 2008-Sep-23 00:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:46:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:46:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 00:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:46:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:46:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.970 0.953 0.923 2008-Sep-23 00:46:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.010 1.129 1.068 2008-Sep-23 00:46:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.941 0.916 1.085 2008-Sep-23 00:46:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.094 0.914 0.104 2008-Sep-23 00:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:47:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 00:47:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 00:47:36 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2008-Sep-23 00:47:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 00:47:36 LOG5 end_task: Level: (2) ID = <10295> Status = 0 0 0 0 ok 2008-Sep-23 00:47:36 LOG1 fixed_driftmap: New position: year = 2008.7310966613431 RA = 00:29:44.5 RA/Dec = 00:30:13.6 +10:30:54.8 2008-Sep-23 00:47:36 NOTE fixed_driftmap: Correcting ZA to 7:50:18.9 ... 2008-Sep-23 00:47:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8385853940 -CF 2008-Sep-23 00:47:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 00:47:36 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 00:47:36 LOG5 begin_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2008-Sep-23 00:47:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 00:47:36 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 00:47:36 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Sep-23 00:47:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 00:47:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 00:47:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 00:47:36 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 00:47:36 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Sep-23 00:47:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8385853940 -CF 2008-Sep-23 00:47:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:47:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 00:47:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 00:47:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:47:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 00:47:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 00:47:36 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Sep-23 00:47:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 00:47:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 00:47:37 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 00:47:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 00:47:37 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Sep-23 00:47:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:47:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 00:47:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 00:47:37 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Sep-23 00:47:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 00:47:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 00:47:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 00:47:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 00:47:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 00:47:37 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2008-Sep-23 00:47:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 00:47:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 00:47:37 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2008-Sep-23 00:47:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 00:47:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 00:47:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 00:47:37 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Sep-23 00:47:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 00:47:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 00:47:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 00:47:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 00:47:37 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Sep-23 00:47:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 00:47:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 00:47:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 00:47:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 00:47:37 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Sep-23 00:47:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 00:47:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 00:47:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 00:47:37 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Sep-23 00:47:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 00:47:37 INFO2 take_data: Starting WAPP scan: 826700009 2008-Sep-23 00:47:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 00:47:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 00:47:37 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Sep-23 00:47:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 00:47:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17258.00 2008-Sep-23 00:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 00:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 00:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 00:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 00:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 00:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 00:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 00:47:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 00:47:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 00:47:39 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Sep-23 00:47:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 00:47:39 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Sep-23 00:47:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 00:47:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 00:47:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 00:47:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 00:47:39 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Sep-23 00:47:39 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 00:47:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 00:47:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 00:47:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 00:47:39 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Sep-23 00:47:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 00:47:39 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 00:47:39 LOG5 finish_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2008-Sep-23 00:47:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 00:47:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 00:47:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 00:47:39 LOG5 end_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2008-Sep-23 00:47:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2008-Sep-23 00:47:39 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2008-Sep-23 00:47:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 00:47:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 00:47:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 00:47:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 00:47:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 00:47:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 00:47:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 00:47:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 00:47:40 LOG5 begin_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Sep-23 00:47:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 00:47:40 INFO2 take_data: Starting WAPP scan: 826700010 2008-Sep-23 00:47:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 00:47:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 00:47:40 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Sep-23 00:47:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 00:47:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 00:47:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:47:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.460 1.313 1.298 1.253 2008-Sep-23 00:47:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.491 1.389 1.564 1.466 2008-Sep-23 00:47:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.302 1.321 1.276 1.451 2008-Sep-23 00:47:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.466 0.094 1.288 0.105 2008-Sep-23 00:47:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17261.00 2008-Sep-23 00:47:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0004.fits 2008-Sep-23 00:47:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0004.fits} 2008-Sep-23 00:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 00:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 00:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 00:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 00:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 00:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 00:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 00:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.126 (still bad) 2008-Sep-23 00:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 00:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 00:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:48:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:48:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.973 0.953 0.922 2008-Sep-23 00:48:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.013 1.130 1.068 2008-Sep-23 00:48:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.939 0.947 0.915 1.084 2008-Sep-23 00:48:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.916 0.104 2008-Sep-23 00:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 00:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 00:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 00:49:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:49:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.970 0.957 0.926 2008-Sep-23 00:49:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.012 1.142 1.079 2008-Sep-23 00:49:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.938 0.915 1.085 2008-Sep-23 00:49:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.094 0.914 0.104 2008-Sep-23 00:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 00:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 00:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 00:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 00:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:50:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.969 0.954 0.923 2008-Sep-23 00:50:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.010 1.131 1.068 2008-Sep-23 00:50:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.939 0.916 1.088 2008-Sep-23 00:50:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.914 0.104 2008-Sep-23 00:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:51:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:51:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:51:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.974 0.955 0.924 2008-Sep-23 00:51:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.013 1.129 1.068 2008-Sep-23 00:51:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.944 0.916 1.085 2008-Sep-23 00:51:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.915 0.104 2008-Sep-23 00:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:51:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.149 (still bad) 2008-Sep-23 00:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.178 (still bad) 2008-Sep-23 00:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.199 (still bad) 2008-Sep-23 00:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.206 (still bad) 2008-Sep-23 00:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.198 (still bad) 2008-Sep-23 00:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.177 (still bad) 2008-Sep-23 00:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.150 (still bad) 2008-Sep-23 00:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.150 (still bad) 2008-Sep-23 00:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.220 (still bad) 2008-Sep-23 00:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.294 (still bad) 2008-Sep-23 00:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.356 (still bad) 2008-Sep-23 00:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.389 (still bad) 2008-Sep-23 00:52:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:52:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.383 1.280 0.956 0.926 2008-Sep-23 00:52:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.010 1.132 1.069 2008-Sep-23 00:52:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.944 0.917 1.086 2008-Sep-23 00:52:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.917 0.104 2008-Sep-23 00:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.337 (still bad) 2008-Sep-23 00:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.269 (still bad) 2008-Sep-23 00:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.194 (still bad) 2008-Sep-23 00:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 00:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.178 (still bad) 2008-Sep-23 00:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.212 (still bad) 2008-Sep-23 00:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.237 (still bad) 2008-Sep-23 00:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.243 (still bad) 2008-Sep-23 00:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.236 (still bad) 2008-Sep-23 00:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.208 (still bad) 2008-Sep-23 00:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.170 (still bad) 2008-Sep-23 00:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 00:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:53:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 00:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:53:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:53:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.973 0.955 0.923 2008-Sep-23 00:53:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.012 1.134 1.067 2008-Sep-23 00:53:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.941 0.917 1.086 2008-Sep-23 00:53:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.916 0.104 2008-Sep-23 00:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:54:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 00:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:54:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:54:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.973 0.962 0.931 2008-Sep-23 00:54:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.009 1.131 1.067 2008-Sep-23 00:54:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.939 0.917 1.086 2008-Sep-23 00:54:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.915 0.104 2008-Sep-23 00:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:55:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:55:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.972 0.954 0.925 2008-Sep-23 00:55:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.010 1.134 1.067 2008-Sep-23 00:55:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.940 0.917 1.087 2008-Sep-23 00:55:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.094 0.915 0.104 2008-Sep-23 00:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:56:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 00:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 00:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:56:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:56:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.973 0.958 0.925 2008-Sep-23 00:56:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.010 1.132 1.069 2008-Sep-23 00:56:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.941 0.915 1.086 2008-Sep-23 00:56:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.915 0.105 2008-Sep-23 00:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:57:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 00:57:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 00:57:41 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Sep-23 00:57:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 00:57:41 LOG5 end_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Sep-23 00:57:41 LOG1 fixed_driftmap: New position: year = 2008.7311158326363 RA = 00:39:51.1 RA/Dec = 00:40:20.2 +10:30:53.8 2008-Sep-23 00:57:41 NOTE fixed_driftmap: Correcting ZA to 7:50:20.0 ... 2008-Sep-23 00:57:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8388753610 -CF 2008-Sep-23 00:57:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 00:57:41 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 00:57:41 LOG5 begin_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2008-Sep-23 00:57:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 00:57:41 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 00:57:41 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2008-Sep-23 00:57:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 00:57:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 00:57:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 00:57:41 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 00:57:41 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2008-Sep-23 00:57:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8388753610 -CF 2008-Sep-23 00:57:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:57:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 00:57:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 00:57:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:57:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 00:57:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 00:57:42 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2008-Sep-23 00:57:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 00:57:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 00:57:42 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 00:57:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 00:57:42 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Sep-23 00:57:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 00:57:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 00:57:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 00:57:42 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Sep-23 00:57:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 00:57:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 00:57:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 00:57:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 00:57:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 00:57:42 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Sep-23 00:57:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 00:57:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 00:57:42 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Sep-23 00:57:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 00:57:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 00:57:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 00:57:42 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2008-Sep-23 00:57:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 00:57:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 00:57:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 00:57:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 00:57:42 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Sep-23 00:57:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 00:57:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 00:57:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 00:57:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 00:57:42 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Sep-23 00:57:42 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 00:57:42 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 00:57:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 00:57:42 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Sep-23 00:57:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 00:57:42 INFO2 take_data: Starting WAPP scan: 826700011 2008-Sep-23 00:57:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 00:57:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 00:57:42 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Sep-23 00:57:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 00:57:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17863.00 2008-Sep-23 00:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 00:57:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 00:57:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 00:57:44 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Sep-23 00:57:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 00:57:44 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Sep-23 00:57:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 00:57:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 00:57:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 00:57:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 00:57:44 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Sep-23 00:57:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 00:57:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 00:57:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 00:57:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 00:57:44 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Sep-23 00:57:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 00:57:44 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 00:57:44 LOG5 finish_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2008-Sep-23 00:57:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 00:57:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 00:57:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 00:57:44 LOG5 end_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2008-Sep-23 00:57:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2008-Sep-23 00:57:44 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2008-Sep-23 00:57:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 00:57:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 00:57:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 00:57:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 00:57:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 00:57:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 00:57:45 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 00:57:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 00:57:45 LOG5 begin_task: Level: (2) ID = <10317> Status = 0 0 0 0 ok 2008-Sep-23 00:57:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 00:57:45 INFO2 take_data: Starting WAPP scan: 826700012 2008-Sep-23 00:57:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 00:57:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 00:57:45 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Sep-23 00:57:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 00:57:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 00:57:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17866.00 2008-Sep-23 00:57:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0005.fits 2008-Sep-23 00:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.568 (still bad) 2008-Sep-23 00:57:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0005.fits} 2008-Sep-23 00:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 00:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 00:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 00:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 00:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 00:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 00:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 00:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 00:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:57:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:57:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.973 0.957 0.924 2008-Sep-23 00:57:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.007 1.132 1.069 2008-Sep-23 00:57:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.938 0.918 1.088 2008-Sep-23 00:57:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.917 0.105 2008-Sep-23 00:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 00:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 00:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 00:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:58:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:58:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.971 0.955 0.926 2008-Sep-23 00:58:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.009 1.132 1.067 2008-Sep-23 00:58:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.940 0.917 1.091 2008-Sep-23 00:58:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.916 0.104 2008-Sep-23 00:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:58:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 00:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 00:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 00:59:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 00:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 00:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 00:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 00:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.153 (still bad) 2008-Sep-23 00:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.159 (still bad) 2008-Sep-23 00:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.164 (still bad) 2008-Sep-23 00:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.165 (still bad) 2008-Sep-23 00:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.160 (still bad) 2008-Sep-23 00:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.155 (still bad) 2008-Sep-23 00:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 00:59:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 00:59:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.973 0.955 0.924 2008-Sep-23 00:59:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.007 1.139 1.075 2008-Sep-23 00:59:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.941 0.917 1.086 2008-Sep-23 00:59:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.914 0.104 2008-Sep-23 00:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:00:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 01:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:00:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:00:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.970 0.956 0.922 2008-Sep-23 01:00:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.008 1.131 1.069 2008-Sep-23 01:00:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.939 0.919 1.087 2008-Sep-23 01:00:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.915 0.104 2008-Sep-23 01:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:01:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:02:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:02:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.970 0.964 0.928 2008-Sep-23 01:02:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.011 1.132 1.067 2008-Sep-23 01:02:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.939 0.921 1.086 2008-Sep-23 01:02:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.916 0.104 2008-Sep-23 01:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:02:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 01:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:03:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:03:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.973 0.956 0.923 2008-Sep-23 01:03:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.011 1.134 1.071 2008-Sep-23 01:03:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.939 0.913 1.086 2008-Sep-23 01:03:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.916 0.104 2008-Sep-23 01:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:04:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.970 0.956 0.923 2008-Sep-23 01:04:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.009 1.132 1.068 2008-Sep-23 01:04:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.940 0.916 1.085 2008-Sep-23 01:04:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.917 0.104 2008-Sep-23 01:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:05:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:05:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.981 0.960 0.929 2008-Sep-23 01:05:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.010 1.131 1.067 2008-Sep-23 01:05:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.940 0.918 1.086 2008-Sep-23 01:05:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.918 0.104 2008-Sep-23 01:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 01:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:06:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:06:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.974 0.958 0.927 2008-Sep-23 01:06:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.008 1.131 1.069 2008-Sep-23 01:06:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.941 0.918 1.087 2008-Sep-23 01:06:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.917 0.104 2008-Sep-23 01:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:06:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 01:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:06:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:07:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:07:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.971 0.981 0.948 2008-Sep-23 01:07:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.010 1.129 1.069 2008-Sep-23 01:07:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.940 0.917 1.087 2008-Sep-23 01:07:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.916 0.104 2008-Sep-23 01:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:07:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 01:07:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 01:07:46 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Sep-23 01:07:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 01:07:46 LOG5 end_task: Level: (2) ID = <10317> Status = 0 0 0 0 ok 2008-Sep-23 01:07:46 LOG1 fixed_driftmap: New position: year = 2008.7311350039292 RA = 00:49:57.7 RA/Dec = 00:50:26.9 +10:30:52.4 2008-Sep-23 01:07:46 NOTE fixed_driftmap: Correcting ZA to 7:50:21.3 ... 2008-Sep-23 01:07:46 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8392614008 -CF 2008-Sep-23 01:07:46 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 01:07:46 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 01:07:46 LOG5 begin_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2008-Sep-23 01:07:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 01:07:46 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 01:07:46 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-Sep-23 01:07:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 01:07:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 01:07:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 01:07:46 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 01:07:46 LOG5 begin_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Sep-23 01:07:46 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8392614008 -CF 2008-Sep-23 01:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:07:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:07:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 01:07:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 01:07:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:07:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 01:07:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 01:07:47 LOG5 end_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Sep-23 01:07:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 01:07:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 01:07:47 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 01:07:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 01:07:47 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Sep-23 01:07:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:07:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 01:07:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 01:07:47 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Sep-23 01:07:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 01:07:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 01:07:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 01:07:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 01:07:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 01:07:47 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Sep-23 01:07:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 01:07:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 01:07:47 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Sep-23 01:07:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 01:07:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 01:07:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 01:07:47 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-Sep-23 01:07:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 01:07:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 01:07:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 01:07:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 01:07:47 LOG5 begin_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2008-Sep-23 01:07:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 01:07:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 01:07:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 01:07:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 01:07:47 LOG5 end_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2008-Sep-23 01:07:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 01:07:47 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 01:07:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 01:07:47 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Sep-23 01:07:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 01:07:47 INFO2 take_data: Starting WAPP scan: 826700013 2008-Sep-23 01:07:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 01:07:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 01:07:47 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Sep-23 01:07:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 01:07:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18468.00 2008-Sep-23 01:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 01:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 01:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 01:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 01:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 01:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 01:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 01:07:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 01:07:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 01:07:49 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Sep-23 01:07:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 01:07:49 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Sep-23 01:07:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 01:07:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 01:07:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 01:07:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 01:07:49 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-Sep-23 01:07:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 01:07:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 01:07:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 01:07:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 01:07:49 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-Sep-23 01:07:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 01:07:49 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 01:07:49 LOG5 finish_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2008-Sep-23 01:07:49 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 01:07:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 01:07:49 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 01:07:49 LOG5 end_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2008-Sep-23 01:07:49 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2008-Sep-23 01:07:49 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2008-Sep-23 01:07:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 01:07:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 01:07:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 01:07:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 01:07:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 01:07:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 01:07:50 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 01:07:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 01:07:50 LOG5 begin_task: Level: (2) ID = <10328> Status = 0 0 0 0 ok 2008-Sep-23 01:07:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 01:07:50 INFO2 take_data: Starting WAPP scan: 826700014 2008-Sep-23 01:07:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 01:07:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 01:07:50 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Sep-23 01:07:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 01:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.571 (still bad) 2008-Sep-23 01:07:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 01:07:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18471.00 2008-Sep-23 01:07:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0006.fits 2008-Sep-23 01:07:50 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0006.fits} 2008-Sep-23 01:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 01:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 01:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 01:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 01:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 01:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 01:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.571 (still bad) 2008-Sep-23 01:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 01:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.131 (still bad) 2008-Sep-23 01:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:08:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:08:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.972 0.958 0.927 2008-Sep-23 01:08:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.012 1.131 1.069 2008-Sep-23 01:08:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.941 0.918 1.088 2008-Sep-23 01:08:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.918 0.105 2008-Sep-23 01:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.134 (still bad) 2008-Sep-23 01:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.133 (still bad) 2008-Sep-23 01:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:08:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 01:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.133 (still bad) 2008-Sep-23 01:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.132 (still bad) 2008-Sep-23 01:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.134 (still bad) 2008-Sep-23 01:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.132 (still bad) 2008-Sep-23 01:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.132 (still bad) 2008-Sep-23 01:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.133 (still bad) 2008-Sep-23 01:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.132 (still bad) 2008-Sep-23 01:09:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 01:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:09:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:09:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.973 0.961 0.930 2008-Sep-23 01:09:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.014 1.133 1.070 2008-Sep-23 01:09:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.944 0.918 1.088 2008-Sep-23 01:09:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.916 0.105 2008-Sep-23 01:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.134 (still bad) 2008-Sep-23 01:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.131 (still bad) 2008-Sep-23 01:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.134 (still bad) 2008-Sep-23 01:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.133 (still bad) 2008-Sep-23 01:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.134 (still bad) 2008-Sep-23 01:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.132 (still bad) 2008-Sep-23 01:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.132 (still bad) 2008-Sep-23 01:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:10:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:10:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.975 0.958 0.927 2008-Sep-23 01:10:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.011 1.132 1.069 2008-Sep-23 01:10:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.942 0.923 1.089 2008-Sep-23 01:10:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.919 0.105 2008-Sep-23 01:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.132 (still bad) 2008-Sep-23 01:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.132 (still bad) 2008-Sep-23 01:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.132 (still bad) 2008-Sep-23 01:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.133 (still bad) 2008-Sep-23 01:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.132 (still bad) 2008-Sep-23 01:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:11:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:11:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.976 0.958 0.925 2008-Sep-23 01:11:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.109 1.031 1.134 1.075 2008-Sep-23 01:11:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.942 0.919 1.087 2008-Sep-23 01:11:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.918 0.105 2008-Sep-23 01:11:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 01:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:11:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 01:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:11:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 01:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 01:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:12:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:12:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.976 0.957 0.926 2008-Sep-23 01:12:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.013 1.133 1.072 2008-Sep-23 01:12:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.939 0.942 0.922 1.089 2008-Sep-23 01:12:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.918 0.105 2008-Sep-23 01:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:12:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:13:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 01:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:13:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:13:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.976 0.959 0.928 2008-Sep-23 01:13:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.015 1.136 1.072 2008-Sep-23 01:13:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.941 0.944 0.924 1.089 2008-Sep-23 01:13:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.919 0.105 2008-Sep-23 01:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:13:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 01:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:13:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 01:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:14:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:14:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.975 0.960 0.929 2008-Sep-23 01:14:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.014 1.136 1.071 2008-Sep-23 01:14:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.941 0.944 0.924 1.091 2008-Sep-23 01:14:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.094 0.919 0.105 2008-Sep-23 01:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.134 (still bad) 2008-Sep-23 01:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.134 (still bad) 2008-Sep-23 01:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:14:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 01:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 01:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 01:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 01:15:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 01:15:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.979 0.961 0.929 2008-Sep-23 01:15:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.018 1.140 1.077 2008-Sep-23 01:15:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.944 0.944 0.924 1.089 2008-Sep-23 01:15:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.095 0.922 0.105 2008-Sep-23 01:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 01:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:16:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 01:16:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.981 0.963 0.929 2008-Sep-23 01:16:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.017 1.137 1.075 2008-Sep-23 01:16:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.951 0.923 1.092 2008-Sep-23 01:16:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.095 0.925 0.105 2008-Sep-23 01:16:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 01:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 01:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 01:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:17:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 01:17:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.982 0.962 0.931 2008-Sep-23 01:17:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 1.017 1.138 1.076 2008-Sep-23 01:17:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.951 0.959 0.927 1.095 2008-Sep-23 01:17:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.095 0.923 0.105 2008-Sep-23 01:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 01:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 01:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 01:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 01:17:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 01:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.145 (still bad) 2008-Sep-23 01:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.151 (still bad) 2008-Sep-23 01:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.164 (still bad) 2008-Sep-23 01:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.177 (still bad) 2008-Sep-23 01:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.193 (still bad) 2008-Sep-23 01:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.204 (still bad) 2008-Sep-23 01:17:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 01:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.210 (still bad) 2008-Sep-23 01:17:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 01:17:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 01:17:51 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Sep-23 01:17:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 01:17:51 LOG5 end_task: Level: (2) ID = <10328> Status = 0 0 0 0 ok 2008-Sep-23 01:17:51 LOG1 fixed_driftmap: New position: year = 2008.7311541752224 RA = 01:00:04.2 RA/Dec = 01:00:33.5 +10:30:50.6 2008-Sep-23 01:17:51 NOTE fixed_driftmap: Correcting ZA to 7:50:23.1 ... 2008-Sep-23 01:17:51 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8397427683 -CF 2008-Sep-23 01:17:51 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 01:17:51 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 01:17:51 LOG5 begin_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2008-Sep-23 01:17:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 01:17:51 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 01:17:51 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2008-Sep-23 01:17:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 01:17:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 01:17:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 01:17:51 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 01:17:51 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Sep-23 01:17:51 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8397427683 -CF 2008-Sep-23 01:17:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:17:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 01:17:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 01:17:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:17:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 01:17:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 01:17:51 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Sep-23 01:17:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 01:17:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 01:17:51 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 01:17:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 01:17:51 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Sep-23 01:17:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:17:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 01:17:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 01:17:51 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Sep-23 01:17:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 01:17:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 01:17:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 01:17:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 01:17:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 01:17:52 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Sep-23 01:17:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 01:17:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 01:17:52 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Sep-23 01:17:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 01:17:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 01:17:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 01:17:52 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2008-Sep-23 01:17:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 01:17:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 01:17:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 01:17:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 01:17:52 LOG5 begin_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2008-Sep-23 01:17:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 01:17:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 01:17:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 01:17:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 01:17:52 LOG5 end_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2008-Sep-23 01:17:52 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 01:17:52 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 01:17:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 01:17:52 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Sep-23 01:17:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 01:17:52 INFO2 take_data: Starting WAPP scan: 826700015 2008-Sep-23 01:17:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 01:17:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 01:17:52 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2008-Sep-23 01:17:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 01:17:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19073.00 2008-Sep-23 01:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.211 (still bad) 2008-Sep-23 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 01:17:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 01:17:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 01:17:54 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2008-Sep-23 01:17:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 01:17:54 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Sep-23 01:17:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 01:17:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 01:17:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 01:17:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 01:17:54 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Sep-23 01:17:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 01:17:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 01:17:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 01:17:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 01:17:54 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Sep-23 01:17:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 01:17:54 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 01:17:54 LOG5 finish_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2008-Sep-23 01:17:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 01:17:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 01:17:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 01:17:54 LOG5 end_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2008-Sep-23 01:17:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2008-Sep-23 01:17:54 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2008-Sep-23 01:17:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 01:17:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 01:17:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 01:17:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 01:17:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 01:17:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 01:17:55 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 01:17:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 01:17:55 LOG5 begin_task: Level: (2) ID = <10339> Status = 0 0 0 0 ok 2008-Sep-23 01:17:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 01:17:55 INFO2 take_data: Starting WAPP scan: 826700016 2008-Sep-23 01:17:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 01:17:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 01:17:55 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2008-Sep-23 01:17:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 01:17:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 01:17:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19076.00 2008-Sep-23 01:17:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0007.fits 2008-Sep-23 01:17:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0007.fits} 2008-Sep-23 01:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.639 (still bad) 2008-Sep-23 01:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 01:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 01:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 01:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 01:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 01:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 01:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 01:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.176 (still bad) 2008-Sep-23 01:17:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 01:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.163 (still bad) 2008-Sep-23 01:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.158 (still bad) 2008-Sep-23 01:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.159 (still bad) 2008-Sep-23 01:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.164 (still bad) 2008-Sep-23 01:18:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.172 (still bad) 2008-Sep-23 01:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.176 (still bad) 2008-Sep-23 01:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.172 (still bad) 2008-Sep-23 01:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.165 (still bad) 2008-Sep-23 01:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.156 (still bad) 2008-Sep-23 01:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.149 (still bad) 2008-Sep-23 01:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 01:18:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 01:18:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.979 0.961 0.930 2008-Sep-23 01:18:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.020 1.140 1.076 2008-Sep-23 01:18:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.942 0.926 1.092 2008-Sep-23 01:18:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.095 0.921 0.105 2008-Sep-23 01:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 01:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 01:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 01:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 01:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 01:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 01:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:19:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 01:19:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.977 0.961 0.929 2008-Sep-23 01:19:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.020 1.137 1.073 2008-Sep-23 01:19:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.941 0.942 0.927 1.091 2008-Sep-23 01:19:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.095 0.921 0.105 2008-Sep-23 01:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 01:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 01:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 01:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 01:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 01:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 01:20:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:20:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.980 0.964 0.931 2008-Sep-23 01:20:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.019 1.141 1.077 2008-Sep-23 01:20:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.944 0.945 0.926 1.094 2008-Sep-23 01:20:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.094 0.921 0.105 2008-Sep-23 01:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 01:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 01:20:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 01:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 01:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:20:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.145 (still bad) 2008-Sep-23 01:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.145 (still bad) 2008-Sep-23 01:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.145 (still bad) 2008-Sep-23 01:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:21:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 01:21:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.977 0.961 0.930 2008-Sep-23 01:21:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.016 1.142 1.080 2008-Sep-23 01:21:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.947 0.925 1.092 2008-Sep-23 01:21:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.095 0.923 0.105 2008-Sep-23 01:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:21:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 01:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.139 (still bad) 2008-Sep-23 01:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 01:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:22:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 01:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.134 (still bad) 2008-Sep-23 01:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:22:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 01:22:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.977 0.959 0.927 2008-Sep-23 01:22:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.017 1.134 1.073 2008-Sep-23 01:22:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.939 0.940 0.924 1.091 2008-Sep-23 01:22:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.095 0.919 0.105 2008-Sep-23 01:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.134 (still bad) 2008-Sep-23 01:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.134 (still bad) 2008-Sep-23 01:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:22:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 01:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.135 (still bad) 2008-Sep-23 01:23:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:23:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.977 0.958 0.928 2008-Sep-23 01:23:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.015 1.136 1.073 2008-Sep-23 01:23:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.941 0.941 0.927 1.097 2008-Sep-23 01:23:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.094 0.920 0.105 2008-Sep-23 01:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 01:23:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 01:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:23:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 01:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:24:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:24:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:24:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.975 0.959 0.929 2008-Sep-23 01:24:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.018 1.140 1.075 2008-Sep-23 01:24:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.939 0.942 0.922 1.092 2008-Sep-23 01:24:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.094 0.921 0.104 2008-Sep-23 01:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 01:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:25:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:25:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.972 0.956 0.926 2008-Sep-23 01:25:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.014 1.135 1.073 2008-Sep-23 01:25:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.940 0.919 1.089 2008-Sep-23 01:25:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.918 0.105 2008-Sep-23 01:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:26:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:26:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 0.973 0.956 0.925 2008-Sep-23 01:26:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.015 1.134 1.073 2008-Sep-23 01:26:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.939 0.919 1.088 2008-Sep-23 01:26:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.919 0.104 2008-Sep-23 01:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:27:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:27:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.974 0.955 0.924 2008-Sep-23 01:27:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.013 1.136 1.073 2008-Sep-23 01:27:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.938 0.921 1.086 2008-Sep-23 01:27:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.094 0.919 0.104 2008-Sep-23 01:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:27:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 01:27:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 01:27:56 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2008-Sep-23 01:27:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 01:27:56 LOG5 end_task: Level: (2) ID = <10339> Status = 0 0 0 0 ok 2008-Sep-23 01:27:56 LOG1 fixed_driftmap: New position: year = 2008.7311733465156 RA = 01:10:10.8 RA/Dec = 01:10:40.2 +10:30:48.6 2008-Sep-23 01:27:56 NOTE fixed_driftmap: Correcting ZA to 7:50:25.1 ... 2008-Sep-23 01:27:56 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8403185262 -CF 2008-Sep-23 01:27:56 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 01:27:56 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 01:27:56 LOG5 begin_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Sep-23 01:27:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 01:27:56 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 01:27:56 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Sep-23 01:27:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 01:27:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 01:27:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 01:27:56 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 01:27:56 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2008-Sep-23 01:27:56 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8403185262 -CF 2008-Sep-23 01:27:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:27:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 01:27:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 01:27:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:27:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 01:27:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 01:27:56 LOG5 end_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2008-Sep-23 01:27:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 01:27:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 01:27:56 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 01:27:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 01:27:56 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Sep-23 01:27:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:27:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 01:27:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 01:27:56 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Sep-23 01:27:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 01:27:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 01:27:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 01:27:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 01:27:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 01:27:57 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-Sep-23 01:27:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 01:27:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 01:27:57 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-Sep-23 01:27:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 01:27:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 01:27:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 01:27:57 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Sep-23 01:27:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 01:27:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 01:27:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 01:27:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 01:27:57 LOG5 begin_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2008-Sep-23 01:27:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 01:27:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 01:27:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 01:27:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 01:27:57 LOG5 end_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2008-Sep-23 01:27:57 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 01:27:57 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 01:27:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 01:27:57 LOG5 begin_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2008-Sep-23 01:27:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 01:27:57 INFO2 take_data: Starting WAPP scan: 826700017 2008-Sep-23 01:27:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 01:27:57 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 01:27:57 LOG5 begin_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2008-Sep-23 01:27:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 01:27:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19678.00 2008-Sep-23 01:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 01:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 01:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 01:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 01:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 01:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 01:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 01:27:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 01:27:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 01:27:59 LOG5 end_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2008-Sep-23 01:27:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 01:27:59 LOG5 end_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2008-Sep-23 01:27:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 01:27:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 01:27:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 01:27:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 01:27:59 LOG5 begin_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2008-Sep-23 01:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.575 (still bad) 2008-Sep-23 01:27:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 01:27:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 01:27:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 01:27:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 01:27:59 LOG5 end_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2008-Sep-23 01:28:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 01:28:00 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 01:28:00 LOG5 finish_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Sep-23 01:28:00 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 01:28:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 01:28:00 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 01:28:00 LOG5 end_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Sep-23 01:28:00 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2008-Sep-23 01:28:00 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2008-Sep-23 01:28:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 01:28:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 01:28:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 01:28:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 01:28:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 01:28:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 01:28:00 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 01:28:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 01:28:00 LOG5 begin_task: Level: (2) ID = <10350> Status = 0 0 0 0 ok 2008-Sep-23 01:28:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 01:28:00 INFO2 take_data: Starting WAPP scan: 826700018 2008-Sep-23 01:28:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 01:28:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 01:28:00 LOG5 begin_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2008-Sep-23 01:28:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 01:28:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 01:28:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19681.00 2008-Sep-23 01:28:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0008.fits 2008-Sep-23 01:28:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0008.fits} 2008-Sep-23 01:28:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 01:28:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 01:28:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 01:28:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 01:28:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 01:28:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:28:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:28:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 01:28:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 01:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:28:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:28:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.975 0.956 0.923 2008-Sep-23 01:28:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.015 1.136 1.074 2008-Sep-23 01:28:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.933 0.922 1.089 2008-Sep-23 01:28:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.919 0.104 2008-Sep-23 01:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:29:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:29:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.973 0.956 0.925 2008-Sep-23 01:29:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.013 1.135 1.072 2008-Sep-23 01:29:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.932 0.928 1.102 2008-Sep-23 01:29:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.918 0.104 2008-Sep-23 01:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:29:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 01:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:30:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:30:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.971 0.953 0.924 2008-Sep-23 01:30:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.012 1.135 1.073 2008-Sep-23 01:30:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.938 0.920 1.089 2008-Sep-23 01:30:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.094 0.919 0.104 2008-Sep-23 01:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:31:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:31:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:31:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.970 0.953 0.924 2008-Sep-23 01:31:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.012 1.132 1.070 2008-Sep-23 01:31:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.937 0.920 1.087 2008-Sep-23 01:31:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.917 0.104 2008-Sep-23 01:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:32:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:32:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:32:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.974 0.957 0.927 2008-Sep-23 01:32:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.014 1.133 1.071 2008-Sep-23 01:32:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.938 0.919 1.087 2008-Sep-23 01:32:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.916 0.104 2008-Sep-23 01:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:33:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:33:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:33:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.972 0.954 0.927 2008-Sep-23 01:33:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.012 1.133 1.072 2008-Sep-23 01:33:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.935 0.919 1.088 2008-Sep-23 01:33:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.918 0.104 2008-Sep-23 01:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:34:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:34:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.973 0.953 0.924 2008-Sep-23 01:34:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.014 1.131 1.071 2008-Sep-23 01:34:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.938 0.919 1.093 2008-Sep-23 01:34:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.919 0.104 2008-Sep-23 01:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:35:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 01:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:35:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:35:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.978 0.955 0.926 2008-Sep-23 01:35:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.010 1.135 1.073 2008-Sep-23 01:35:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.940 0.923 1.091 2008-Sep-23 01:35:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.918 0.104 2008-Sep-23 01:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:36:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:36:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.974 0.954 0.928 2008-Sep-23 01:36:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.015 1.135 1.073 2008-Sep-23 01:36:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.941 0.920 1.090 2008-Sep-23 01:36:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.919 0.104 2008-Sep-23 01:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:37:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:37:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:37:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.977 0.955 0.926 2008-Sep-23 01:37:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.015 1.134 1.072 2008-Sep-23 01:37:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.938 0.919 1.090 2008-Sep-23 01:37:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.920 0.104 2008-Sep-23 01:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:38:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 01:38:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 01:38:01 LOG5 end_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2008-Sep-23 01:38:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 01:38:01 LOG5 end_task: Level: (2) ID = <10350> Status = 0 0 0 0 ok 2008-Sep-23 01:38:01 LOG1 fixed_driftmap: New position: year = 2008.7311925178087 RA = 01:20:17.4 RA/Dec = 01:20:46.9 +10:30:46.1 2008-Sep-23 01:38:01 NOTE fixed_driftmap: Correcting ZA to 7:50:27.6 ... 2008-Sep-23 01:38:01 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8409875512 -CF 2008-Sep-23 01:38:01 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 01:38:01 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 01:38:01 LOG5 begin_task: Level: (2) ID = <10352> Status = 0 0 0 0 ok 2008-Sep-23 01:38:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 01:38:01 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 01:38:01 LOG5 begin_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Sep-23 01:38:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 01:38:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 01:38:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 01:38:01 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 01:38:01 LOG5 begin_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2008-Sep-23 01:38:01 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8409875512 -CF 2008-Sep-23 01:38:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:38:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 01:38:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 01:38:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:38:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 01:38:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 01:38:02 LOG5 end_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2008-Sep-23 01:38:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 01:38:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 01:38:02 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 01:38:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 01:38:02 LOG5 begin_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Sep-23 01:38:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 01:38:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 01:38:02 LOG5 end_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Sep-23 01:38:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 01:38:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 01:38:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 01:38:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 01:38:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 01:38:02 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Sep-23 01:38:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:38:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 01:38:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 01:38:02 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Sep-23 01:38:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 01:38:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 01:38:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 01:38:02 LOG5 end_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Sep-23 01:38:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 01:38:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 01:38:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 01:38:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 01:38:02 LOG5 begin_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Sep-23 01:38:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 01:38:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 01:38:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 01:38:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 01:38:02 LOG5 end_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Sep-23 01:38:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 01:38:02 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 01:38:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 01:38:02 LOG5 begin_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2008-Sep-23 01:38:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 01:38:02 INFO2 take_data: Starting WAPP scan: 826700019 2008-Sep-23 01:38:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 01:38:02 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 01:38:02 LOG5 begin_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Sep-23 01:38:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 01:38:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20283.00 2008-Sep-23 01:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 01:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 01:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 01:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 01:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 01:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 01:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 01:38:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 01:38:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 01:38:04 LOG5 end_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Sep-23 01:38:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 01:38:04 LOG5 end_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2008-Sep-23 01:38:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 01:38:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 01:38:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 01:38:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 01:38:04 LOG5 begin_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2008-Sep-23 01:38:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 01:38:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 01:38:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 01:38:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 01:38:04 LOG5 end_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2008-Sep-23 01:38:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 01:38:04 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 01:38:04 LOG5 finish_task: Level: (2) ID = <10352> Status = 0 0 0 0 ok 2008-Sep-23 01:38:04 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 01:38:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 01:38:04 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 01:38:04 LOG5 end_task: Level: (2) ID = <10352> Status = 0 0 0 0 ok 2008-Sep-23 01:38:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 21 of 99 2008-Sep-23 01:38:05 LOG4 send_obs_status: To obs_status: <1> LOOP 21 2008-Sep-23 01:38:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 01:38:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 01:38:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 01:38:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 01:38:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 01:38:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 01:38:05 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 01:38:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 01:38:05 LOG5 begin_task: Level: (2) ID = <10361> Status = 0 0 0 0 ok 2008-Sep-23 01:38:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 01:38:05 INFO2 take_data: Starting WAPP scan: 826700020 2008-Sep-23 01:38:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 01:38:05 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 01:38:05 LOG5 begin_task: Level: (3) ID = <10362> Status = 0 0 0 0 ok 2008-Sep-23 01:38:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 01:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.575 (still bad) 2008-Sep-23 01:38:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 01:38:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20286.00 2008-Sep-23 01:38:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0009.fits 2008-Sep-23 01:38:05 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0009.fits} 2008-Sep-23 01:38:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 01:38:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 01:38:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 01:38:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 01:38:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 01:38:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:38:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:38:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 01:38:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 01:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.575 (still bad) 2008-Sep-23 01:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 01:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:38:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:38:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.974 0.957 0.930 2008-Sep-23 01:38:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.013 1.132 1.074 2008-Sep-23 01:38:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.942 0.919 1.091 2008-Sep-23 01:38:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.919 0.104 2008-Sep-23 01:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:39:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 01:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:39:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:39:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:39:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.974 0.956 0.928 2008-Sep-23 01:39:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.015 1.136 1.076 2008-Sep-23 01:39:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.942 0.917 1.089 2008-Sep-23 01:39:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.094 0.921 0.104 2008-Sep-23 01:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:40:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 01:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:40:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:40:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.978 0.961 0.932 2008-Sep-23 01:40:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.010 1.132 1.072 2008-Sep-23 01:40:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.946 0.918 1.089 2008-Sep-23 01:40:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.917 0.104 2008-Sep-23 01:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 01:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:41:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:41:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.975 0.959 0.928 2008-Sep-23 01:41:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.019 1.135 1.073 2008-Sep-23 01:41:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.942 0.917 1.091 2008-Sep-23 01:41:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.918 0.104 2008-Sep-23 01:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:42:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:42:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:42:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.976 0.958 0.930 2008-Sep-23 01:42:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.016 1.136 1.076 2008-Sep-23 01:42:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.944 0.921 1.094 2008-Sep-23 01:42:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.918 0.104 2008-Sep-23 01:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:43:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:43:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:43:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.975 0.957 0.930 2008-Sep-23 01:43:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.016 1.136 1.075 2008-Sep-23 01:43:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.946 0.918 1.094 2008-Sep-23 01:43:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.919 0.104 2008-Sep-23 01:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:44:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 01:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:44:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 01:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:44:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:44:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.976 0.955 0.928 2008-Sep-23 01:44:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.023 1.136 1.076 2008-Sep-23 01:44:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.944 0.927 1.102 2008-Sep-23 01:44:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.094 0.940 0.104 2008-Sep-23 01:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:45:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 01:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 01:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:46:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:46:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.975 0.955 0.928 2008-Sep-23 01:46:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.017 1.137 1.078 2008-Sep-23 01:46:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.947 0.918 1.093 2008-Sep-23 01:46:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.919 0.104 2008-Sep-23 01:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 01:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:47:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:47:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.974 0.956 0.927 2008-Sep-23 01:47:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.011 1.133 1.075 2008-Sep-23 01:47:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.942 0.919 1.094 2008-Sep-23 01:47:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.917 0.104 2008-Sep-23 01:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 01:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 01:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 01:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:47:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 01:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:48:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:48:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.977 0.959 0.929 2008-Sep-23 01:48:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.015 1.135 1.076 2008-Sep-23 01:48:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.939 0.945 0.921 1.092 2008-Sep-23 01:48:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.918 0.104 2008-Sep-23 01:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:48:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 01:48:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 01:48:06 LOG5 end_task: Level: (3) ID = <10362> Status = 0 0 0 0 ok 2008-Sep-23 01:48:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 01:48:06 LOG5 end_task: Level: (2) ID = <10361> Status = 0 0 0 0 ok 2008-Sep-23 01:48:06 LOG1 fixed_driftmap: New position: year = 2008.7312116891019 RA = 01:30:24.0 RA/Dec = 01:30:53.5 +10:30:43.4 2008-Sep-23 01:48:06 NOTE fixed_driftmap: Correcting ZA to 7:50:30.3 ... 2008-Sep-23 01:48:06 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8417485507 -CF 2008-Sep-23 01:48:06 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 01:48:06 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 01:48:06 LOG5 begin_task: Level: (2) ID = <10363> Status = 0 0 0 0 ok 2008-Sep-23 01:48:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 01:48:06 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 01:48:06 LOG5 begin_task: Level: (3) ID = <10364> Status = 0 0 0 0 ok 2008-Sep-23 01:48:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 01:48:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 01:48:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 01:48:06 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 01:48:06 LOG5 begin_task: Level: (4) ID = <10365> Status = 0 0 0 0 ok 2008-Sep-23 01:48:06 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8417485507 -CF 2008-Sep-23 01:48:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:48:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 01:48:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 01:48:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:48:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 01:48:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 01:48:06 LOG5 end_task: Level: (4) ID = <10365> Status = 0 0 0 0 ok 2008-Sep-23 01:48:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 01:48:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 01:48:06 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 01:48:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 01:48:06 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Sep-23 01:48:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:48:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 01:48:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 01:48:07 LOG5 end_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Sep-23 01:48:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 01:48:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 01:48:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 01:48:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 01:48:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 01:48:07 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Sep-23 01:48:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 01:48:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 01:48:07 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Sep-23 01:48:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 01:48:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 01:48:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 01:48:07 LOG5 end_task: Level: (3) ID = <10364> Status = 0 0 0 0 ok 2008-Sep-23 01:48:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 01:48:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 01:48:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 01:48:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 01:48:07 LOG5 begin_task: Level: (3) ID = <10368> Status = 0 0 0 0 ok 2008-Sep-23 01:48:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 01:48:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 01:48:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 01:48:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 01:48:07 LOG5 end_task: Level: (3) ID = <10368> Status = 0 0 0 0 ok 2008-Sep-23 01:48:07 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 01:48:07 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 01:48:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 01:48:07 LOG5 begin_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2008-Sep-23 01:48:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 01:48:07 INFO2 take_data: Starting WAPP scan: 826700021 2008-Sep-23 01:48:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 01:48:07 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 01:48:07 LOG5 begin_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2008-Sep-23 01:48:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 01:48:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20888.00 2008-Sep-23 01:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 01:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 01:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 01:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 01:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 01:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 01:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 01:48:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 01:48:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 01:48:09 LOG5 end_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2008-Sep-23 01:48:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 01:48:09 LOG5 end_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2008-Sep-23 01:48:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 01:48:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 01:48:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 01:48:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 01:48:09 LOG5 begin_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2008-Sep-23 01:48:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 01:48:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 01:48:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 01:48:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 01:48:10 LOG5 end_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2008-Sep-23 01:48:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 01:48:10 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 01:48:10 LOG5 finish_task: Level: (2) ID = <10363> Status = 0 0 0 0 ok 2008-Sep-23 01:48:10 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 01:48:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 01:48:10 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 01:48:10 LOG5 end_task: Level: (2) ID = <10363> Status = 0 0 0 0 ok 2008-Sep-23 01:48:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 22 of 99 2008-Sep-23 01:48:10 LOG4 send_obs_status: To obs_status: <1> LOOP 22 2008-Sep-23 01:48:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 01:48:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 01:48:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 01:48:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 01:48:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 01:48:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 01:48:10 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 01:48:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 01:48:10 LOG5 begin_task: Level: (2) ID = <10372> Status = 0 0 0 0 ok 2008-Sep-23 01:48:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 01:48:10 INFO2 take_data: Starting WAPP scan: 826700022 2008-Sep-23 01:48:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 01:48:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 01:48:10 LOG5 begin_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2008-Sep-23 01:48:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 01:48:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 01:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.575 (still bad) 2008-Sep-23 01:48:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20891.00 2008-Sep-23 01:48:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0010.fits 2008-Sep-23 01:48:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0010.fits} 2008-Sep-23 01:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 01:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 01:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 01:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 01:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 01:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 01:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 01:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.575 (still bad) 2008-Sep-23 01:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 01:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:49:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:49:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.973 0.956 0.929 2008-Sep-23 01:49:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.017 1.137 1.077 2008-Sep-23 01:49:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.938 0.920 1.092 2008-Sep-23 01:49:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.918 0.104 2008-Sep-23 01:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:49:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 01:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:50:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:50:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.975 0.956 0.928 2008-Sep-23 01:50:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.017 1.136 1.076 2008-Sep-23 01:50:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.941 0.921 1.093 2008-Sep-23 01:50:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.917 0.104 2008-Sep-23 01:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:50:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 01:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 01:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:51:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:51:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.978 0.962 0.933 2008-Sep-23 01:51:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.019 1.140 1.079 2008-Sep-23 01:51:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.941 0.941 0.926 1.102 2008-Sep-23 01:51:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.094 0.921 0.104 2008-Sep-23 01:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 01:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 01:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.151 (still bad) 2008-Sep-23 01:51:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 01:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.154 (still bad) 2008-Sep-23 01:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.156 (still bad) 2008-Sep-23 01:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.158 (still bad) 2008-Sep-23 01:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.157 (still bad) 2008-Sep-23 01:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.158 (still bad) 2008-Sep-23 01:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.153 (still bad) 2008-Sep-23 01:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.152 (still bad) 2008-Sep-23 01:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.151 (still bad) 2008-Sep-23 01:52:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:52:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 0.990 0.963 0.935 2008-Sep-23 01:52:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.020 1.152 1.091 2008-Sep-23 01:52:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.939 0.946 0.925 1.101 2008-Sep-23 01:52:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.094 0.925 0.104 2008-Sep-23 01:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.155 (still bad) 2008-Sep-23 01:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.158 (still bad) 2008-Sep-23 01:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.159 (still bad) 2008-Sep-23 01:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.158 (still bad) 2008-Sep-23 01:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.155 (still bad) 2008-Sep-23 01:52:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 01:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.150 (still bad) 2008-Sep-23 01:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.148 (still bad) 2008-Sep-23 01:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 01:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 01:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 01:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 01:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 01:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 01:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 01:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:52:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 01:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:52:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 01:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:53:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:53:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 0.986 0.964 0.938 2008-Sep-23 01:53:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 1.020 1.142 1.082 2008-Sep-23 01:53:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.947 0.926 1.101 2008-Sep-23 01:53:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.094 0.923 0.104 2008-Sep-23 01:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:54:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 0.983 0.966 0.938 2008-Sep-23 01:54:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 1.019 1.143 1.080 2008-Sep-23 01:54:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.950 0.922 1.097 2008-Sep-23 01:54:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.094 0.924 0.104 2008-Sep-23 01:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 01:54:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 01:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:55:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:55:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.978 0.962 0.934 2008-Sep-23 01:55:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.019 1.141 1.078 2008-Sep-23 01:55:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.944 0.922 1.096 2008-Sep-23 01:55:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.094 0.922 0.104 2008-Sep-23 01:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:56:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:56:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.977 0.961 0.929 2008-Sep-23 01:56:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.015 1.140 1.076 2008-Sep-23 01:56:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.946 0.920 1.095 2008-Sep-23 01:56:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.094 0.921 0.104 2008-Sep-23 01:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 01:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:57:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:57:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.978 0.961 0.930 2008-Sep-23 01:57:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.016 1.138 1.075 2008-Sep-23 01:57:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.939 0.942 0.923 1.095 2008-Sep-23 01:57:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.094 0.921 0.104 2008-Sep-23 01:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:57:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 01:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:58:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 01:58:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 01:58:11 LOG5 end_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2008-Sep-23 01:58:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 01:58:11 LOG5 end_task: Level: (2) ID = <10372> Status = 0 0 0 0 ok 2008-Sep-23 01:58:11 LOG1 fixed_driftmap: New position: year = 2008.731230860395 RA = 01:40:30.6 RA/Dec = 01:41:00.2 +10:30:40.3 2008-Sep-23 01:58:11 NOTE fixed_driftmap: Correcting ZA to 7:50:33.4 ... 2008-Sep-23 01:58:11 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8426000362 -CF 2008-Sep-23 01:58:11 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 01:58:11 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 01:58:11 LOG5 begin_task: Level: (2) ID = <10374> Status = 0 0 0 0 ok 2008-Sep-23 01:58:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 01:58:11 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 01:58:11 LOG5 begin_task: Level: (3) ID = <10375> Status = 0 0 0 0 ok 2008-Sep-23 01:58:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 01:58:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 01:58:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 01:58:11 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 01:58:11 LOG5 begin_task: Level: (4) ID = <10376> Status = 0 0 0 0 ok 2008-Sep-23 01:58:11 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8426000362 -CF 2008-Sep-23 01:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:58:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:58:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 01:58:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 01:58:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:58:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 01:58:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 01:58:12 LOG5 end_task: Level: (4) ID = <10376> Status = 0 0 0 0 ok 2008-Sep-23 01:58:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 01:58:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 01:58:12 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 01:58:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 01:58:12 LOG5 begin_task: Level: (4) ID = <10377> Status = 0 0 0 0 ok 2008-Sep-23 01:58:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 01:58:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 01:58:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 01:58:12 LOG5 end_task: Level: (4) ID = <10377> Status = 0 0 0 0 ok 2008-Sep-23 01:58:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 01:58:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 01:58:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 01:58:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 01:58:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 01:58:12 LOG5 begin_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2008-Sep-23 01:58:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 01:58:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 01:58:12 LOG5 end_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2008-Sep-23 01:58:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 01:58:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 01:58:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 01:58:12 LOG5 end_task: Level: (3) ID = <10375> Status = 0 0 0 0 ok 2008-Sep-23 01:58:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 01:58:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 01:58:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 01:58:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 01:58:12 LOG5 begin_task: Level: (3) ID = <10379> Status = 0 0 0 0 ok 2008-Sep-23 01:58:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 01:58:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 01:58:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 01:58:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 01:58:12 LOG5 end_task: Level: (3) ID = <10379> Status = 0 0 0 0 ok 2008-Sep-23 01:58:12 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 01:58:12 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 01:58:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 01:58:12 LOG5 begin_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Sep-23 01:58:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 01:58:12 INFO2 take_data: Starting WAPP scan: 826700023 2008-Sep-23 01:58:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 01:58:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 01:58:12 LOG5 begin_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Sep-23 01:58:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 01:58:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21493.00 2008-Sep-23 01:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 01:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 01:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 01:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 01:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 01:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 01:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 01:58:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 01:58:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 01:58:14 LOG5 end_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2008-Sep-23 01:58:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 01:58:14 LOG5 end_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Sep-23 01:58:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 01:58:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 01:58:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 01:58:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 01:58:14 LOG5 begin_task: Level: (3) ID = <10382> Status = 0 0 0 0 ok 2008-Sep-23 01:58:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 01:58:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 01:58:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 01:58:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 01:58:14 LOG5 end_task: Level: (3) ID = <10382> Status = 0 0 0 0 ok 2008-Sep-23 01:58:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 01:58:14 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 01:58:14 LOG5 finish_task: Level: (2) ID = <10374> Status = 0 0 0 0 ok 2008-Sep-23 01:58:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 01:58:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 01:58:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 01:58:14 LOG5 end_task: Level: (2) ID = <10374> Status = 0 0 0 0 ok 2008-Sep-23 01:58:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 23 of 99 2008-Sep-23 01:58:14 LOG4 send_obs_status: To obs_status: <1> LOOP 23 2008-Sep-23 01:58:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 01:58:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 01:58:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 01:58:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 01:58:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 01:58:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 01:58:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 01:58:15 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 01:58:15 LOG5 begin_task: Level: (2) ID = <10383> Status = 0 0 0 0 ok 2008-Sep-23 01:58:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 01:58:15 INFO2 take_data: Starting WAPP scan: 826700024 2008-Sep-23 01:58:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 01:58:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 01:58:15 LOG5 begin_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2008-Sep-23 01:58:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 01:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.580 (still bad) 2008-Sep-23 01:58:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 01:58:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21496.00 2008-Sep-23 01:58:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0011.fits 2008-Sep-23 01:58:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0011.fits} 2008-Sep-23 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 01:58:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:58:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.463 1.320 1.304 1.262 2008-Sep-23 01:58:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.491 1.393 1.580 1.473 2008-Sep-23 01:58:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.314 1.318 1.289 1.462 2008-Sep-23 01:58:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.471 0.094 1.294 0.104 2008-Sep-23 01:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 01:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 01:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 01:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 01:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:59:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 01:59:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.976 0.959 0.929 2008-Sep-23 01:59:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.105 1.028 1.142 1.075 2008-Sep-23 01:59:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.943 0.924 1.091 2008-Sep-23 01:59:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.094 0.921 0.104 2008-Sep-23 01:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:59:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 01:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 01:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 01:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 01:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 01:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 02:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:00:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:00:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.976 0.961 0.930 2008-Sep-23 02:00:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.015 1.141 1.074 2008-Sep-23 02:00:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.943 0.923 1.092 2008-Sep-23 02:00:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.094 0.922 0.104 2008-Sep-23 02:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:01:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:01:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 0.983 0.981 0.950 2008-Sep-23 02:01:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.014 1.140 1.076 2008-Sep-23 02:01:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.947 0.923 1.095 2008-Sep-23 02:01:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.094 0.922 0.104 2008-Sep-23 02:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:02:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:02:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.979 0.966 0.940 2008-Sep-23 02:02:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.017 1.143 1.078 2008-Sep-23 02:02:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.939 0.949 0.927 1.099 2008-Sep-23 02:02:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.094 0.922 0.104 2008-Sep-23 02:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:02:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:03:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:03:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.979 0.983 0.953 2008-Sep-23 02:03:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.018 1.140 1.080 2008-Sep-23 02:03:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.950 0.921 1.095 2008-Sep-23 02:03:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.094 0.921 0.104 2008-Sep-23 02:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:04:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:04:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.979 0.960 0.933 2008-Sep-23 02:04:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.017 1.143 1.082 2008-Sep-23 02:04:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.944 0.923 1.097 2008-Sep-23 02:04:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.094 0.921 0.104 2008-Sep-23 02:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:04:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 02:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 02:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:05:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:05:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.981 0.971 0.942 2008-Sep-23 02:05:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.019 1.140 1.080 2008-Sep-23 02:05:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.939 0.952 0.931 1.105 2008-Sep-23 02:05:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.094 0.922 0.104 2008-Sep-23 02:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.170 (still bad) 2008-Sep-23 02:06:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 02:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.204 (still bad) 2008-Sep-23 02:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.222 (still bad) 2008-Sep-23 02:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.223 (still bad) 2008-Sep-23 02:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.204 (still bad) 2008-Sep-23 02:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.173 (still bad) 2008-Sep-23 02:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:06:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 02:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.154 (still bad) 2008-Sep-23 02:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.174 (still bad) 2008-Sep-23 02:06:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:06:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 0.986 0.963 0.934 2008-Sep-23 02:06:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.191 1.112 1.143 1.081 2008-Sep-23 02:06:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.945 0.924 1.098 2008-Sep-23 02:06:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.094 0.925 0.104 2008-Sep-23 02:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.198 (still bad) 2008-Sep-23 02:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.195 (still bad) 2008-Sep-23 02:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.181 (still bad) 2008-Sep-23 02:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.159 (still bad) 2008-Sep-23 02:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:07:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:07:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.981 0.962 0.933 2008-Sep-23 02:07:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.023 1.139 1.079 2008-Sep-23 02:07:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.941 0.947 0.922 1.099 2008-Sep-23 02:07:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.094 0.922 0.105 2008-Sep-23 02:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:07:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 02:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:08:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 02:08:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 02:08:16 LOG5 end_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2008-Sep-23 02:08:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 02:08:16 LOG5 end_task: Level: (2) ID = <10383> Status = 0 0 0 0 ok 2008-Sep-23 02:08:16 LOG1 fixed_driftmap: New position: year = 2008.731250031688 RA = 01:50:37.2 RA/Dec = 01:51:06.8 +10:30:37.0 2008-Sep-23 02:08:16 NOTE fixed_driftmap: Correcting ZA to 7:50:36.7 ... 2008-Sep-23 02:08:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8435403623 -CF 2008-Sep-23 02:08:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 02:08:16 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 02:08:16 LOG5 begin_task: Level: (2) ID = <10385> Status = 0 0 0 0 ok 2008-Sep-23 02:08:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 02:08:16 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 02:08:16 LOG5 begin_task: Level: (3) ID = <10386> Status = 0 0 0 0 ok 2008-Sep-23 02:08:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 02:08:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 02:08:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 02:08:16 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 02:08:16 LOG5 begin_task: Level: (4) ID = <10387> Status = 0 0 0 0 ok 2008-Sep-23 02:08:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8435403623 -CF 2008-Sep-23 02:08:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:08:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 02:08:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 02:08:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:08:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 02:08:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 02:08:17 LOG5 end_task: Level: (4) ID = <10387> Status = 0 0 0 0 ok 2008-Sep-23 02:08:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 02:08:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 02:08:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 02:08:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 02:08:17 LOG5 begin_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2008-Sep-23 02:08:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:08:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 02:08:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 02:08:17 LOG5 end_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2008-Sep-23 02:08:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 02:08:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 02:08:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 02:08:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 02:08:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 02:08:17 LOG5 begin_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2008-Sep-23 02:08:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 02:08:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 02:08:17 LOG5 end_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2008-Sep-23 02:08:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 02:08:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 02:08:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 02:08:17 LOG5 end_task: Level: (3) ID = <10386> Status = 0 0 0 0 ok 2008-Sep-23 02:08:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 02:08:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 02:08:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 02:08:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 02:08:17 LOG5 begin_task: Level: (3) ID = <10390> Status = 0 0 0 0 ok 2008-Sep-23 02:08:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 02:08:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 02:08:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 02:08:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 02:08:17 LOG5 end_task: Level: (3) ID = <10390> Status = 0 0 0 0 ok 2008-Sep-23 02:08:17 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 02:08:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 02:08:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 02:08:17 LOG5 begin_task: Level: (3) ID = <10391> Status = 0 0 0 0 ok 2008-Sep-23 02:08:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 02:08:17 INFO2 take_data: Starting WAPP scan: 826700025 2008-Sep-23 02:08:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 02:08:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 02:08:17 LOG5 begin_task: Level: (4) ID = <10392> Status = 0 0 0 0 ok 2008-Sep-23 02:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 02:08:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22098.00 2008-Sep-23 02:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 02:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 02:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 02:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 02:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 02:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 02:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 02:08:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 02:08:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 02:08:19 LOG5 end_task: Level: (4) ID = <10392> Status = 0 0 0 0 ok 2008-Sep-23 02:08:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 02:08:19 LOG5 end_task: Level: (3) ID = <10391> Status = 0 0 0 0 ok 2008-Sep-23 02:08:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 02:08:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 02:08:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 02:08:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 02:08:19 LOG5 begin_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2008-Sep-23 02:08:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 02:08:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 02:08:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 02:08:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 02:08:19 LOG5 end_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2008-Sep-23 02:08:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 02:08:19 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 02:08:19 LOG5 finish_task: Level: (2) ID = <10385> Status = 0 0 0 0 ok 2008-Sep-23 02:08:19 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 02:08:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 02:08:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 02:08:19 LOG5 end_task: Level: (2) ID = <10385> Status = 0 0 0 0 ok 2008-Sep-23 02:08:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 24 of 99 2008-Sep-23 02:08:19 LOG4 send_obs_status: To obs_status: <1> LOOP 24 2008-Sep-23 02:08:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 02:08:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 02:08:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 02:08:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 02:08:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 02:08:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 02:08:20 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 02:08:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 02:08:20 LOG5 begin_task: Level: (2) ID = <10394> Status = 0 0 0 0 ok 2008-Sep-23 02:08:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 02:08:20 INFO2 take_data: Starting WAPP scan: 826700026 2008-Sep-23 02:08:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 02:08:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 02:08:20 LOG5 begin_task: Level: (3) ID = <10395> Status = 0 0 0 0 ok 2008-Sep-23 02:08:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 02:08:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 02:08:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22101.00 2008-Sep-23 02:08:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0012.fits 2008-Sep-23 02:08:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0012.fits} 2008-Sep-23 02:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.577 (still bad) 2008-Sep-23 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 02:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:08:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:08:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 0.978 0.961 0.933 2008-Sep-23 02:08:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.019 1.141 1.080 2008-Sep-23 02:08:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.946 0.926 1.098 2008-Sep-23 02:08:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.094 0.923 0.104 2008-Sep-23 02:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:09:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:09:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 0.981 0.962 0.935 2008-Sep-23 02:09:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.022 1.141 1.080 2008-Sep-23 02:09:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.944 0.950 0.927 1.098 2008-Sep-23 02:09:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.094 0.923 0.104 2008-Sep-23 02:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:10:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:10:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.980 0.960 0.933 2008-Sep-23 02:10:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.022 1.142 1.079 2008-Sep-23 02:10:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.948 0.924 1.098 2008-Sep-23 02:10:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.094 0.921 0.104 2008-Sep-23 02:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:11:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 02:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:11:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:11:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.979 0.964 0.936 2008-Sep-23 02:11:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.021 1.140 1.079 2008-Sep-23 02:11:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.948 0.925 1.097 2008-Sep-23 02:11:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.094 0.921 0.104 2008-Sep-23 02:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:12:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:12:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.979 0.961 0.934 2008-Sep-23 02:12:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.023 1.143 1.081 2008-Sep-23 02:12:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.950 0.925 1.098 2008-Sep-23 02:12:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.094 0.923 0.104 2008-Sep-23 02:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:13:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:13:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.981 0.960 0.933 2008-Sep-23 02:13:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 1.023 1.145 1.080 2008-Sep-23 02:13:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.946 0.925 1.099 2008-Sep-23 02:13:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.094 0.920 0.104 2008-Sep-23 02:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 02:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 02:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:14:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:14:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.982 0.960 0.935 2008-Sep-23 02:14:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.019 1.139 1.079 2008-Sep-23 02:14:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.941 0.945 0.922 1.097 2008-Sep-23 02:14:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.094 0.921 0.105 2008-Sep-23 02:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 02:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 02:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 02:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:15:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:15:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.979 0.958 0.932 2008-Sep-23 02:15:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 1.018 1.141 1.079 2008-Sep-23 02:15:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.941 0.947 0.925 1.097 2008-Sep-23 02:15:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.094 0.923 0.104 2008-Sep-23 02:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 02:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 02:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.140 (still bad) 2008-Sep-23 02:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:16:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:16:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.979 0.960 0.933 2008-Sep-23 02:16:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 1.021 1.141 1.078 2008-Sep-23 02:16:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.946 0.924 1.095 2008-Sep-23 02:16:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.094 0.921 0.105 2008-Sep-23 02:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 02:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:17:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 02:17:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.983 0.961 0.934 2008-Sep-23 02:17:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.021 1.142 1.079 2008-Sep-23 02:17:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.941 0.945 0.927 1.096 2008-Sep-23 02:17:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.095 0.922 0.105 2008-Sep-23 02:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:18:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 02:18:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 02:18:21 LOG5 end_task: Level: (3) ID = <10395> Status = 0 0 0 0 ok 2008-Sep-23 02:18:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 02:18:21 LOG5 end_task: Level: (2) ID = <10394> Status = 0 0 0 0 ok 2008-Sep-23 02:18:21 LOG1 fixed_driftmap: New position: year = 2008.7312692029811 RA = 02:00:43.8 RA/Dec = 02:01:13.5 +10:30:33.3 2008-Sep-23 02:18:21 NOTE fixed_driftmap: Correcting ZA to 7:50:40.4 ... 2008-Sep-23 02:18:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8445676956 -CF 2008-Sep-23 02:18:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 02:18:21 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 02:18:21 LOG5 begin_task: Level: (2) ID = <10396> Status = 0 0 0 0 ok 2008-Sep-23 02:18:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 02:18:21 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 02:18:21 LOG5 begin_task: Level: (3) ID = <10397> Status = 0 0 0 0 ok 2008-Sep-23 02:18:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 02:18:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 02:18:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 02:18:21 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 02:18:21 LOG5 begin_task: Level: (4) ID = <10398> Status = 0 0 0 0 ok 2008-Sep-23 02:18:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8445676956 -CF 2008-Sep-23 02:18:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:18:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 02:18:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 02:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:18:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:18:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 02:18:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 02:18:21 LOG5 end_task: Level: (4) ID = <10398> Status = 0 0 0 0 ok 2008-Sep-23 02:18:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 02:18:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 02:18:22 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 02:18:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 02:18:22 LOG5 begin_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2008-Sep-23 02:18:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:18:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 02:18:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 02:18:22 LOG5 end_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2008-Sep-23 02:18:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 02:18:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 02:18:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 02:18:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 02:18:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 02:18:22 LOG5 begin_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2008-Sep-23 02:18:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 02:18:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 02:18:22 LOG5 end_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2008-Sep-23 02:18:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 02:18:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 02:18:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 02:18:22 LOG5 end_task: Level: (3) ID = <10397> Status = 0 0 0 0 ok 2008-Sep-23 02:18:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 02:18:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 02:18:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 02:18:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 02:18:22 LOG5 begin_task: Level: (3) ID = <10401> Status = 0 0 0 0 ok 2008-Sep-23 02:18:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 02:18:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 02:18:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 02:18:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 02:18:22 LOG5 end_task: Level: (3) ID = <10401> Status = 0 0 0 0 ok 2008-Sep-23 02:18:22 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 02:18:22 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 02:18:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 02:18:22 LOG5 begin_task: Level: (3) ID = <10402> Status = 0 0 0 0 ok 2008-Sep-23 02:18:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 02:18:22 INFO2 take_data: Starting WAPP scan: 826700027 2008-Sep-23 02:18:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 02:18:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 02:18:22 LOG5 begin_task: Level: (4) ID = <10403> Status = 0 0 0 0 ok 2008-Sep-23 02:18:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 02:18:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22703.00 2008-Sep-23 02:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 02:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 02:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 02:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 02:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 02:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 02:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 02:18:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 02:18:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 02:18:24 LOG5 end_task: Level: (4) ID = <10403> Status = 0 0 0 0 ok 2008-Sep-23 02:18:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 02:18:24 LOG5 end_task: Level: (3) ID = <10402> Status = 0 0 0 0 ok 2008-Sep-23 02:18:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 02:18:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 02:18:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 02:18:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 02:18:24 LOG5 begin_task: Level: (3) ID = <10404> Status = 0 0 0 0 ok 2008-Sep-23 02:18:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 02:18:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 02:18:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 02:18:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 02:18:24 LOG5 end_task: Level: (3) ID = <10404> Status = 0 0 0 0 ok 2008-Sep-23 02:18:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 02:18:24 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 02:18:24 LOG5 finish_task: Level: (2) ID = <10396> Status = 0 0 0 0 ok 2008-Sep-23 02:18:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 02:18:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 02:18:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 02:18:24 LOG5 end_task: Level: (2) ID = <10396> Status = 0 0 0 0 ok 2008-Sep-23 02:18:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 25 of 99 2008-Sep-23 02:18:24 LOG4 send_obs_status: To obs_status: <1> LOOP 25 2008-Sep-23 02:18:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 02:18:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 02:18:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 02:18:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 02:18:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 02:18:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 02:18:25 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 02:18:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 02:18:25 LOG5 begin_task: Level: (2) ID = <10405> Status = 0 0 0 0 ok 2008-Sep-23 02:18:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 02:18:25 INFO2 take_data: Starting WAPP scan: 826700028 2008-Sep-23 02:18:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 02:18:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 02:18:25 LOG5 begin_task: Level: (3) ID = <10406> Status = 0 0 0 0 ok 2008-Sep-23 02:18:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 02:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.581 (still bad) 2008-Sep-23 02:18:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 02:18:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22706.00 2008-Sep-23 02:18:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0013.fits 2008-Sep-23 02:18:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0013.fits} 2008-Sep-23 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 02:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.581 (still bad) 2008-Sep-23 02:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:18:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 02:18:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.978 0.961 0.936 2008-Sep-23 02:18:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 1.017 1.143 1.078 2008-Sep-23 02:18:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.950 0.953 1.125 2008-Sep-23 02:18:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.095 0.922 0.105 2008-Sep-23 02:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 02:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 02:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.146 (still bad) 2008-Sep-23 02:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.146 (still bad) 2008-Sep-23 02:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.145 (still bad) 2008-Sep-23 02:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.147 (still bad) 2008-Sep-23 02:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.147 (still bad) 2008-Sep-23 02:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.150 (still bad) 2008-Sep-23 02:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.151 (still bad) 2008-Sep-23 02:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.149 (still bad) 2008-Sep-23 02:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.150 (still bad) 2008-Sep-23 02:19:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:19:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.985 0.965 0.939 2008-Sep-23 02:19:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.103 1.029 1.150 1.083 2008-Sep-23 02:19:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.951 0.929 1.100 2008-Sep-23 02:19:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.094 0.922 0.105 2008-Sep-23 02:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.148 (still bad) 2008-Sep-23 02:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:19:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 02:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.146 (still bad) 2008-Sep-23 02:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.146 (still bad) 2008-Sep-23 02:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.148 (still bad) 2008-Sep-23 02:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.148 (still bad) 2008-Sep-23 02:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.147 (still bad) 2008-Sep-23 02:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.148 (still bad) 2008-Sep-23 02:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.148 (still bad) 2008-Sep-23 02:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.148 (still bad) 2008-Sep-23 02:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.146 (still bad) 2008-Sep-23 02:20:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:20:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.981 0.962 0.938 2008-Sep-23 02:20:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 1.023 1.145 1.081 2008-Sep-23 02:20:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.946 0.930 1.100 2008-Sep-23 02:20:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.094 0.923 0.105 2008-Sep-23 02:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:20:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.147 (still bad) 2008-Sep-23 02:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.146 (still bad) 2008-Sep-23 02:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.147 (still bad) 2008-Sep-23 02:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.145 (still bad) 2008-Sep-23 02:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:21:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.145 (still bad) 2008-Sep-23 02:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 02:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 02:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 02:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:21:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 02:21:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.982 0.964 0.939 2008-Sep-23 02:21:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.097 1.022 1.142 1.080 2008-Sep-23 02:21:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.947 0.949 0.929 1.102 2008-Sep-23 02:21:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.095 0.923 0.105 2008-Sep-23 02:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.141 (still bad) 2008-Sep-23 02:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.145 (still bad) 2008-Sep-23 02:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.145 (still bad) 2008-Sep-23 02:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 02:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 02:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 02:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 02:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 02:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.143 (still bad) 2008-Sep-23 02:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.142 (still bad) 2008-Sep-23 02:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.145 (still bad) 2008-Sep-23 02:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.145 (still bad) 2008-Sep-23 02:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:22:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 02:22:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.985 0.964 0.935 2008-Sep-23 02:22:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 1.023 1.147 1.082 2008-Sep-23 02:22:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.944 0.925 1.099 2008-Sep-23 02:22:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.095 0.923 0.105 2008-Sep-23 02:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.144 (still bad) 2008-Sep-23 02:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.145 (still bad) 2008-Sep-23 02:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.147 (still bad) 2008-Sep-23 02:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.146 (still bad) 2008-Sep-23 02:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:23:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 02:23:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.981 0.966 0.937 2008-Sep-23 02:23:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.023 1.146 1.079 2008-Sep-23 02:23:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.952 0.952 0.931 1.103 2008-Sep-23 02:23:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.095 0.924 0.105 2008-Sep-23 02:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.146 (still bad) 2008-Sep-23 02:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.146 (still bad) 2008-Sep-23 02:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.148 (still bad) 2008-Sep-23 02:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.150 (still bad) 2008-Sep-23 02:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.152 (still bad) 2008-Sep-23 02:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.153 (still bad) 2008-Sep-23 02:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.154 (still bad) 2008-Sep-23 02:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.155 (still bad) 2008-Sep-23 02:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.156 (still bad) 2008-Sep-23 02:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.153 (still bad) 2008-Sep-23 02:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.152 (still bad) 2008-Sep-23 02:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.150 (still bad) 2008-Sep-23 02:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.149 (still bad) 2008-Sep-23 02:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.148 (still bad) 2008-Sep-23 02:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.148 (still bad) 2008-Sep-23 02:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:24:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:24:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.979 0.962 0.934 2008-Sep-23 02:24:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 1.021 1.142 1.081 2008-Sep-23 02:24:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.947 0.950 0.926 1.099 2008-Sep-23 02:24:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.094 0.923 0.105 2008-Sep-23 02:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:25:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 02:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:25:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 02:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:25:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:25:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.979 0.959 0.931 2008-Sep-23 02:25:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.023 1.145 1.080 2008-Sep-23 02:25:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.948 0.928 1.098 2008-Sep-23 02:25:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.094 0.922 0.104 2008-Sep-23 02:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:26:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 02:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:26:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:26:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.977 0.958 0.931 2008-Sep-23 02:26:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.023 1.143 1.078 2008-Sep-23 02:26:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.946 0.926 1.096 2008-Sep-23 02:26:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.094 0.922 0.104 2008-Sep-23 02:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:27:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 02:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:27:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 02:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:27:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 02:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:27:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:27:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:27:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.978 0.960 0.932 2008-Sep-23 02:27:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.019 1.143 1.076 2008-Sep-23 02:27:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.947 0.922 1.094 2008-Sep-23 02:27:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.094 0.923 0.104 2008-Sep-23 02:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:28:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 02:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:28:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 02:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:28:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 02:28:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 02:28:26 LOG5 end_task: Level: (3) ID = <10406> Status = 0 0 0 0 ok 2008-Sep-23 02:28:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 02:28:26 LOG5 end_task: Level: (2) ID = <10405> Status = 0 0 0 0 ok 2008-Sep-23 02:28:26 LOG1 fixed_driftmap: New position: year = 2008.7312883742743 RA = 02:10:50.4 RA/Dec = 02:11:20.2 +10:30:29.3 2008-Sep-23 02:28:26 NOTE fixed_driftmap: Correcting ZA to 7:50:44.4 ... 2008-Sep-23 02:28:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8456800382 -CF 2008-Sep-23 02:28:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 02:28:26 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 02:28:26 LOG5 begin_task: Level: (2) ID = <10407> Status = 0 0 0 0 ok 2008-Sep-23 02:28:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 02:28:26 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 02:28:26 LOG5 begin_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2008-Sep-23 02:28:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 02:28:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 02:28:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 02:28:26 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 02:28:26 LOG5 begin_task: Level: (4) ID = <10409> Status = 0 0 0 0 ok 2008-Sep-23 02:28:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8456800382 -CF 2008-Sep-23 02:28:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:28:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 02:28:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 02:28:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:28:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 02:28:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 02:28:26 LOG5 end_task: Level: (4) ID = <10409> Status = 0 0 0 0 ok 2008-Sep-23 02:28:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 02:28:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 02:28:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 02:28:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 02:28:26 LOG5 begin_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Sep-23 02:28:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:28:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 02:28:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 02:28:27 LOG5 end_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Sep-23 02:28:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 02:28:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 02:28:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 02:28:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 02:28:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 02:28:27 LOG5 begin_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2008-Sep-23 02:28:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 02:28:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 02:28:27 LOG5 end_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2008-Sep-23 02:28:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 02:28:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 02:28:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 02:28:27 LOG5 end_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2008-Sep-23 02:28:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 02:28:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 02:28:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 02:28:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 02:28:27 LOG5 begin_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Sep-23 02:28:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 02:28:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 02:28:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 02:28:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 02:28:27 LOG5 end_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2008-Sep-23 02:28:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 02:28:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 02:28:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 02:28:27 LOG5 begin_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Sep-23 02:28:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 02:28:27 INFO2 take_data: Starting WAPP scan: 826700029 2008-Sep-23 02:28:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 02:28:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 02:28:27 LOG5 begin_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Sep-23 02:28:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 02:28:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23308.00 2008-Sep-23 02:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 02:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 02:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 02:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 02:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 02:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 02:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 02:28:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 02:28:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 02:28:29 LOG5 end_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2008-Sep-23 02:28:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 02:28:29 LOG5 end_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Sep-23 02:28:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 02:28:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 02:28:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 02:28:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 02:28:29 LOG5 begin_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Sep-23 02:28:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 02:28:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 02:28:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 02:28:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 02:28:30 LOG5 end_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2008-Sep-23 02:28:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 02:28:30 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 02:28:30 LOG5 finish_task: Level: (2) ID = <10407> Status = 0 0 0 0 ok 2008-Sep-23 02:28:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 02:28:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 02:28:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 02:28:30 LOG5 end_task: Level: (2) ID = <10407> Status = 0 0 0 0 ok 2008-Sep-23 02:28:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 26 of 99 2008-Sep-23 02:28:30 LOG4 send_obs_status: To obs_status: <1> LOOP 26 2008-Sep-23 02:28:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 02:28:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 02:28:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 02:28:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 02:28:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 02:28:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 02:28:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 02:28:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 02:28:30 LOG5 begin_task: Level: (2) ID = <10416> Status = 0 0 0 0 ok 2008-Sep-23 02:28:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 02:28:30 INFO2 take_data: Starting WAPP scan: 826700030 2008-Sep-23 02:28:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 02:28:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 02:28:30 LOG5 begin_task: Level: (3) ID = <10417> Status = 0 0 0 0 ok 2008-Sep-23 02:28:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 02:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.580 (still bad) 2008-Sep-23 02:28:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 02:28:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23311.00 2008-Sep-23 02:28:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0014.fits 2008-Sep-23 02:28:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0014.fits} 2008-Sep-23 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 02:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.580 (still bad) 2008-Sep-23 02:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.148 (still bad) 2008-Sep-23 02:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.150 (still bad) 2008-Sep-23 02:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.149 (still bad) 2008-Sep-23 02:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.149 (still bad) 2008-Sep-23 02:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:28:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:28:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.975 0.958 0.932 2008-Sep-23 02:28:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.021 1.142 1.076 2008-Sep-23 02:28:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.940 0.948 0.925 1.094 2008-Sep-23 02:28:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.094 0.919 0.104 2008-Sep-23 02:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:29:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:29:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 0.986 0.957 0.932 2008-Sep-23 02:29:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.019 1.143 1.077 2008-Sep-23 02:29:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.949 0.925 1.093 2008-Sep-23 02:29:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.094 0.921 0.104 2008-Sep-23 02:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:30:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:31:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:31:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.972 0.966 0.941 2008-Sep-23 02:31:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.021 1.143 1.076 2008-Sep-23 02:31:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.944 0.953 0.923 1.093 2008-Sep-23 02:31:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.094 0.921 0.104 2008-Sep-23 02:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:32:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:32:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.973 0.953 0.930 2008-Sep-23 02:32:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.022 1.140 1.076 2008-Sep-23 02:32:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.940 0.944 0.923 1.093 2008-Sep-23 02:32:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.094 0.920 0.104 2008-Sep-23 02:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:33:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:33:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.974 0.956 0.929 2008-Sep-23 02:33:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 1.048 1.139 1.073 2008-Sep-23 02:33:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.943 0.919 1.090 2008-Sep-23 02:33:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.094 0.919 0.104 2008-Sep-23 02:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:33:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 02:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:34:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:34:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.971 0.957 0.929 2008-Sep-23 02:34:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.015 1.138 1.074 2008-Sep-23 02:34:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.942 0.921 1.088 2008-Sep-23 02:34:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.918 0.104 2008-Sep-23 02:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:35:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 02:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:35:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:35:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.967 0.952 0.929 2008-Sep-23 02:35:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.013 1.136 1.072 2008-Sep-23 02:35:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.938 0.920 1.092 2008-Sep-23 02:35:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.918 0.104 2008-Sep-23 02:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:36:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:36:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.970 0.953 0.930 2008-Sep-23 02:36:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.011 1.134 1.072 2008-Sep-23 02:36:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.938 0.915 1.090 2008-Sep-23 02:36:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.916 0.104 2008-Sep-23 02:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:37:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:37:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.968 0.952 0.930 2008-Sep-23 02:37:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.014 1.136 1.073 2008-Sep-23 02:37:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.939 0.918 1.091 2008-Sep-23 02:37:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.916 0.104 2008-Sep-23 02:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:37:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 02:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:37:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 02:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:38:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 02:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:38:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:38:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.971 0.954 0.931 2008-Sep-23 02:38:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.013 1.136 1.075 2008-Sep-23 02:38:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.941 0.916 1.091 2008-Sep-23 02:38:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.919 0.104 2008-Sep-23 02:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:38:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 02:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:38:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 02:38:31 LOG5 end_task: Level: (3) ID = <10417> Status = 0 0 0 0 ok 2008-Sep-23 02:38:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 02:38:31 LOG5 end_task: Level: (2) ID = <10416> Status = 0 0 0 0 ok 2008-Sep-23 02:38:31 LOG1 fixed_driftmap: New position: year = 2008.7313075455675 RA = 02:20:57.0 RA/Dec = 02:21:26.8 +10:30:25.0 2008-Sep-23 02:38:31 NOTE fixed_driftmap: Correcting ZA to 7:50:48.8 ... 2008-Sep-23 02:38:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8468752270 -CF 2008-Sep-23 02:38:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 02:38:31 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 02:38:31 LOG5 begin_task: Level: (2) ID = <10418> Status = 0 0 0 0 ok 2008-Sep-23 02:38:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 02:38:31 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 02:38:31 LOG5 begin_task: Level: (3) ID = <10419> Status = 0 0 0 0 ok 2008-Sep-23 02:38:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 02:38:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 02:38:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 02:38:31 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 02:38:31 LOG5 begin_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2008-Sep-23 02:38:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8468752270 -CF 2008-Sep-23 02:38:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:38:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 02:38:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 02:38:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:38:32 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 02:38:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 02:38:32 LOG5 end_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2008-Sep-23 02:38:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 02:38:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 02:38:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 02:38:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 02:38:32 LOG5 begin_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Sep-23 02:38:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:38:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 02:38:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 02:38:32 LOG5 end_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Sep-23 02:38:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 02:38:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 02:38:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 02:38:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 02:38:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 02:38:32 LOG5 begin_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2008-Sep-23 02:38:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 02:38:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 02:38:32 LOG5 end_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2008-Sep-23 02:38:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 02:38:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 02:38:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 02:38:32 LOG5 end_task: Level: (3) ID = <10419> Status = 0 0 0 0 ok 2008-Sep-23 02:38:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 02:38:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 02:38:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 02:38:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 02:38:32 LOG5 begin_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Sep-23 02:38:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 02:38:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 02:38:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 02:38:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 02:38:32 LOG5 end_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2008-Sep-23 02:38:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 02:38:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 02:38:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 02:38:32 LOG5 begin_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Sep-23 02:38:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 02:38:32 INFO2 take_data: Starting WAPP scan: 826700031 2008-Sep-23 02:38:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 02:38:33 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 02:38:33 LOG5 begin_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Sep-23 02:38:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 02:38:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23914.00 2008-Sep-23 02:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 02:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 02:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 02:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 02:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 02:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 02:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 02:38:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 02:38:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 02:38:35 LOG5 end_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2008-Sep-23 02:38:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 02:38:35 LOG5 end_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Sep-23 02:38:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 02:38:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 02:38:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 02:38:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 02:38:35 LOG5 begin_task: Level: (3) ID = <10426> Status = 0 0 0 0 ok 2008-Sep-23 02:38:35 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 02:38:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 02:38:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 02:38:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 02:38:35 LOG5 end_task: Level: (3) ID = <10426> Status = 0 0 0 0 ok 2008-Sep-23 02:38:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 02:38:35 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 02:38:35 LOG5 finish_task: Level: (2) ID = <10418> Status = 0 0 0 0 ok 2008-Sep-23 02:38:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 02:38:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 02:38:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 02:38:35 LOG5 end_task: Level: (2) ID = <10418> Status = 0 0 0 0 ok 2008-Sep-23 02:38:35 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 27 of 99 2008-Sep-23 02:38:36 LOG4 send_obs_status: To obs_status: <1> LOOP 27 2008-Sep-23 02:38:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 02:38:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 02:38:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 02:38:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 02:38:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 02:38:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 02:38:36 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 02:38:36 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 02:38:36 LOG5 begin_task: Level: (2) ID = <10427> Status = 0 0 0 0 ok 2008-Sep-23 02:38:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 02:38:36 INFO2 take_data: Starting WAPP scan: 826700032 2008-Sep-23 02:38:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 02:38:36 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 02:38:36 LOG5 begin_task: Level: (3) ID = <10428> Status = 0 0 0 0 ok 2008-Sep-23 02:38:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 02:38:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 02:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.570 (still bad) 2008-Sep-23 02:38:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23917.00 2008-Sep-23 02:38:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0015.fits 2008-Sep-23 02:38:36 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0015.fits} 2008-Sep-23 02:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 02:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 02:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 02:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 02:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 02:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 02:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 02:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.570 (still bad) 2008-Sep-23 02:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 02:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 02:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 02:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 02:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:39:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:39:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.971 0.954 0.932 2008-Sep-23 02:39:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.015 1.136 1.076 2008-Sep-23 02:39:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.937 0.919 1.091 2008-Sep-23 02:39:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.915 0.104 2008-Sep-23 02:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 02:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:39:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:40:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:40:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.971 0.951 0.930 2008-Sep-23 02:40:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.012 1.137 1.076 2008-Sep-23 02:40:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.944 0.919 1.094 2008-Sep-23 02:40:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.918 0.104 2008-Sep-23 02:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:41:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:41:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.972 0.953 0.928 2008-Sep-23 02:41:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.013 1.142 1.077 2008-Sep-23 02:41:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 0.969 0.919 1.096 2008-Sep-23 02:41:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.918 0.104 2008-Sep-23 02:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:41:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 02:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.152 (still bad) 2008-Sep-23 02:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.156 (still bad) 2008-Sep-23 02:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.159 (still bad) 2008-Sep-23 02:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.160 (still bad) 2008-Sep-23 02:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.159 (still bad) 2008-Sep-23 02:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.155 (still bad) 2008-Sep-23 02:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.150 (still bad) 2008-Sep-23 02:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.149 (still bad) 2008-Sep-23 02:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.150 (still bad) 2008-Sep-23 02:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 02:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:42:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:42:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.971 0.953 0.930 2008-Sep-23 02:42:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.017 1.136 1.074 2008-Sep-23 02:42:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.939 0.920 1.092 2008-Sep-23 02:42:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.918 0.104 2008-Sep-23 02:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:42:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 02:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:43:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:43:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:43:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.972 0.953 0.934 2008-Sep-23 02:43:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.018 1.138 1.075 2008-Sep-23 02:43:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.939 0.921 1.093 2008-Sep-23 02:43:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.917 0.104 2008-Sep-23 02:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:43:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 02:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:44:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:44:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.971 0.959 0.934 2008-Sep-23 02:44:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.019 1.138 1.073 2008-Sep-23 02:44:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.937 0.923 1.097 2008-Sep-23 02:44:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.920 0.104 2008-Sep-23 02:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:45:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:45:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:45:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.971 0.956 0.934 2008-Sep-23 02:45:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.021 1.140 1.075 2008-Sep-23 02:45:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.937 0.920 1.094 2008-Sep-23 02:45:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.918 0.104 2008-Sep-23 02:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:45:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:46:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:46:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.972 0.955 0.934 2008-Sep-23 02:46:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.017 1.138 1.074 2008-Sep-23 02:46:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.938 0.917 1.093 2008-Sep-23 02:46:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.918 0.104 2008-Sep-23 02:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:47:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:47:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.974 0.958 0.937 2008-Sep-23 02:47:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.018 1.139 1.076 2008-Sep-23 02:47:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.941 0.919 1.095 2008-Sep-23 02:47:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.918 0.104 2008-Sep-23 02:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:48:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:48:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.970 0.955 0.933 2008-Sep-23 02:48:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.016 1.137 1.074 2008-Sep-23 02:48:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.941 0.918 1.096 2008-Sep-23 02:48:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.916 0.104 2008-Sep-23 02:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:48:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 02:48:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 02:48:37 LOG5 end_task: Level: (3) ID = <10428> Status = 0 0 0 0 ok 2008-Sep-23 02:48:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 02:48:37 LOG5 end_task: Level: (2) ID = <10427> Status = 0 0 0 0 ok 2008-Sep-23 02:48:37 LOG1 fixed_driftmap: New position: year = 2008.7313267485488 RA = 02:31:04.6 RA/Dec = 02:31:34.5 +10:30:20.4 2008-Sep-23 02:48:37 NOTE fixed_driftmap: Correcting ZA to 7:50:53.4 ... 2008-Sep-23 02:48:37 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8481531150 -CF 2008-Sep-23 02:48:37 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 02:48:37 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 02:48:37 LOG5 begin_task: Level: (2) ID = <10429> Status = 0 0 0 0 ok 2008-Sep-23 02:48:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 02:48:37 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 02:48:37 LOG5 begin_task: Level: (3) ID = <10430> Status = 0 0 0 0 ok 2008-Sep-23 02:48:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 02:48:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 02:48:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 02:48:37 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 02:48:37 LOG5 begin_task: Level: (4) ID = <10431> Status = 0 0 0 0 ok 2008-Sep-23 02:48:37 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8481531150 -CF 2008-Sep-23 02:48:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:48:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 02:48:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 02:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:48:38 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 02:48:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 02:48:38 LOG5 end_task: Level: (4) ID = <10431> Status = 0 0 0 0 ok 2008-Sep-23 02:48:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 02:48:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 02:48:38 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 02:48:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 02:48:38 LOG5 begin_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Sep-23 02:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:48:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 02:48:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 02:48:38 LOG5 end_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Sep-23 02:48:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 02:48:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 02:48:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 02:48:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 02:48:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 02:48:38 LOG5 begin_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2008-Sep-23 02:48:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 02:48:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 02:48:38 LOG5 end_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2008-Sep-23 02:48:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 02:48:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 02:48:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 02:48:38 LOG5 end_task: Level: (3) ID = <10430> Status = 0 0 0 0 ok 2008-Sep-23 02:48:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 02:48:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 02:48:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 02:48:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 02:48:38 LOG5 begin_task: Level: (3) ID = <10434> Status = 0 0 0 0 ok 2008-Sep-23 02:48:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 02:48:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 02:48:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 02:48:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 02:48:38 LOG5 end_task: Level: (3) ID = <10434> Status = 0 0 0 0 ok 2008-Sep-23 02:48:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 02:48:38 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 02:48:38 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 02:48:38 LOG5 begin_task: Level: (3) ID = <10435> Status = 0 0 0 0 ok 2008-Sep-23 02:48:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 02:48:38 INFO2 take_data: Starting WAPP scan: 826700033 2008-Sep-23 02:48:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 02:48:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 02:48:38 LOG5 begin_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Sep-23 02:48:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 02:48:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24519.00 2008-Sep-23 02:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 02:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 02:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 02:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 02:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 02:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 02:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 02:48:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 02:48:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 02:48:40 LOG5 end_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2008-Sep-23 02:48:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 02:48:40 LOG5 end_task: Level: (3) ID = <10435> Status = 0 0 0 0 ok 2008-Sep-23 02:48:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 02:48:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 02:48:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 02:48:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 02:48:40 LOG5 begin_task: Level: (3) ID = <10437> Status = 0 0 0 0 ok 2008-Sep-23 02:48:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 02:48:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 02:48:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 02:48:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 02:48:40 LOG5 end_task: Level: (3) ID = <10437> Status = 0 0 0 0 ok 2008-Sep-23 02:48:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 02:48:40 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 02:48:40 LOG5 finish_task: Level: (2) ID = <10429> Status = 0 0 0 0 ok 2008-Sep-23 02:48:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 02:48:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 02:48:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 02:48:40 LOG5 end_task: Level: (2) ID = <10429> Status = 0 0 0 0 ok 2008-Sep-23 02:48:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 28 of 99 2008-Sep-23 02:48:41 LOG4 send_obs_status: To obs_status: <1> LOOP 28 2008-Sep-23 02:48:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 02:48:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 02:48:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 02:48:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 02:48:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 02:48:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 02:48:41 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 02:48:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 02:48:41 LOG5 begin_task: Level: (2) ID = <10438> Status = 0 0 0 0 ok 2008-Sep-23 02:48:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 02:48:41 INFO2 take_data: Starting WAPP scan: 826700034 2008-Sep-23 02:48:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 02:48:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 02:48:41 LOG5 begin_task: Level: (3) ID = <10439> Status = 0 0 0 0 ok 2008-Sep-23 02:48:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 02:48:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 02:48:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24522.00 2008-Sep-23 02:48:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0016.fits 2008-Sep-23 02:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.576 (still bad) 2008-Sep-23 02:48:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0016.fits} 2008-Sep-23 02:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 02:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 02:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 02:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 02:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 02:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 02:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 02:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.576 (still bad) 2008-Sep-23 02:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:49:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:49:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.971 0.954 0.932 2008-Sep-23 02:49:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.015 1.137 1.072 2008-Sep-23 02:49:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.940 0.925 1.101 2008-Sep-23 02:49:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.094 0.923 0.104 2008-Sep-23 02:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:50:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:50:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.975 0.955 0.936 2008-Sep-23 02:50:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.018 1.138 1.074 2008-Sep-23 02:50:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.937 0.920 1.095 2008-Sep-23 02:50:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.916 0.104 2008-Sep-23 02:50:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:51:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:51:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.969 0.953 0.932 2008-Sep-23 02:51:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.017 1.135 1.073 2008-Sep-23 02:51:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.929 0.939 0.920 1.092 2008-Sep-23 02:51:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.918 0.104 2008-Sep-23 02:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 02:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 02:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 02:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 02:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:52:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 02:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:52:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:52:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.970 0.953 0.932 2008-Sep-23 02:52:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.011 1.135 1.073 2008-Sep-23 02:52:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.941 0.921 1.092 2008-Sep-23 02:52:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.917 0.104 2008-Sep-23 02:52:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 02:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 02:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 02:53:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:53:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.970 0.956 0.933 2008-Sep-23 02:53:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.011 1.134 1.073 2008-Sep-23 02:53:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.939 0.922 1.092 2008-Sep-23 02:53:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.915 0.104 2008-Sep-23 02:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 02:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 02:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:54:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:54:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.972 0.959 0.939 2008-Sep-23 02:54:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.012 1.136 1.074 2008-Sep-23 02:54:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.939 0.921 1.095 2008-Sep-23 02:54:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.916 0.104 2008-Sep-23 02:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:54:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 02:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:55:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:55:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 02:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:55:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:55:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.974 0.956 0.935 2008-Sep-23 02:55:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.015 1.137 1.073 2008-Sep-23 02:55:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.941 0.918 1.092 2008-Sep-23 02:55:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.094 0.919 0.104 2008-Sep-23 02:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:56:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:56:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:56:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:56:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.972 0.956 0.936 2008-Sep-23 02:56:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.013 1.138 1.075 2008-Sep-23 02:56:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.940 0.925 1.101 2008-Sep-23 02:56:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.918 0.104 2008-Sep-23 02:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:56:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 02:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 02:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:57:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:57:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.973 0.955 0.932 2008-Sep-23 02:57:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.017 1.141 1.078 2008-Sep-23 02:57:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.941 0.919 1.094 2008-Sep-23 02:57:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.915 0.104 2008-Sep-23 02:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:58:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 02:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:58:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 02:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 02:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:58:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:58:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.974 0.954 0.935 2008-Sep-23 02:58:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.017 1.138 1.074 2008-Sep-23 02:58:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.950 0.920 1.096 2008-Sep-23 02:58:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.916 0.104 2008-Sep-23 02:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:58:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 02:58:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 02:58:42 LOG5 end_task: Level: (3) ID = <10439> Status = 0 0 0 0 ok 2008-Sep-23 02:58:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 02:58:42 LOG5 end_task: Level: (2) ID = <10438> Status = 0 0 0 0 ok 2008-Sep-23 02:58:42 LOG1 fixed_driftmap: New position: year = 2008.7313459198417 RA = 02:41:11.2 RA/Dec = 02:41:41.1 +10:30:15.5 2008-Sep-23 02:58:42 NOTE fixed_driftmap: Correcting ZA to 7:50:58.2 ... 2008-Sep-23 02:58:42 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8495070012 -CF 2008-Sep-23 02:58:42 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 02:58:42 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 02:58:42 LOG5 begin_task: Level: (2) ID = <10440> Status = 0 0 0 0 ok 2008-Sep-23 02:58:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 02:58:42 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 02:58:42 LOG5 begin_task: Level: (3) ID = <10441> Status = 0 0 0 0 ok 2008-Sep-23 02:58:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 02:58:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 02:58:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 02:58:42 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 02:58:42 LOG5 begin_task: Level: (4) ID = <10442> Status = 0 0 0 0 ok 2008-Sep-23 02:58:42 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8495070012 -CF 2008-Sep-23 02:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:58:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:58:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 02:58:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 02:58:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:58:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 02:58:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 02:58:42 LOG5 end_task: Level: (4) ID = <10442> Status = 0 0 0 0 ok 2008-Sep-23 02:58:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 02:58:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 02:58:42 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 02:58:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 02:58:42 LOG5 begin_task: Level: (4) ID = <10443> Status = 0 0 0 0 ok 2008-Sep-23 02:58:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 02:58:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 02:58:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 02:58:43 LOG5 end_task: Level: (4) ID = <10443> Status = 0 0 0 0 ok 2008-Sep-23 02:58:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 02:58:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 02:58:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 02:58:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 02:58:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 02:58:43 LOG5 begin_task: Level: (4) ID = <10444> Status = 0 0 0 0 ok 2008-Sep-23 02:58:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 02:58:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 02:58:43 LOG5 end_task: Level: (4) ID = <10444> Status = 0 0 0 0 ok 2008-Sep-23 02:58:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 02:58:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 02:58:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 02:58:43 LOG5 end_task: Level: (3) ID = <10441> Status = 0 0 0 0 ok 2008-Sep-23 02:58:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 02:58:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 02:58:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 02:58:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 02:58:43 LOG5 begin_task: Level: (3) ID = <10445> Status = 0 0 0 0 ok 2008-Sep-23 02:58:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 02:58:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 02:58:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 02:58:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 02:58:43 LOG5 end_task: Level: (3) ID = <10445> Status = 0 0 0 0 ok 2008-Sep-23 02:58:43 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 02:58:43 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 02:58:43 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 02:58:43 LOG5 begin_task: Level: (3) ID = <10446> Status = 0 0 0 0 ok 2008-Sep-23 02:58:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 02:58:43 INFO2 take_data: Starting WAPP scan: 826700035 2008-Sep-23 02:58:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 02:58:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 02:58:43 LOG5 begin_task: Level: (4) ID = <10447> Status = 0 0 0 0 ok 2008-Sep-23 02:58:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 02:58:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25124.00 2008-Sep-23 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 02:58:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 02:58:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 02:58:45 LOG5 end_task: Level: (4) ID = <10447> Status = 0 0 0 0 ok 2008-Sep-23 02:58:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 02:58:45 LOG5 end_task: Level: (3) ID = <10446> Status = 0 0 0 0 ok 2008-Sep-23 02:58:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 02:58:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 02:58:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 02:58:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 02:58:45 LOG5 begin_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Sep-23 02:58:45 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 02:58:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 02:58:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 02:58:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 02:58:45 LOG5 end_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2008-Sep-23 02:58:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 02:58:45 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 02:58:45 LOG5 finish_task: Level: (2) ID = <10440> Status = 0 0 0 0 ok 2008-Sep-23 02:58:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 02:58:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 02:58:45 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 02:58:45 LOG5 end_task: Level: (2) ID = <10440> Status = 0 0 0 0 ok 2008-Sep-23 02:58:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 29 of 99 2008-Sep-23 02:58:45 LOG4 send_obs_status: To obs_status: <1> LOOP 29 2008-Sep-23 02:58:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 02:58:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 02:58:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 02:58:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 02:58:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 02:58:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 02:58:46 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 02:58:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 02:58:46 LOG5 begin_task: Level: (2) ID = <10449> Status = 0 0 0 0 ok 2008-Sep-23 02:58:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 02:58:46 INFO2 take_data: Starting WAPP scan: 826700036 2008-Sep-23 02:58:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 02:58:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 02:58:46 LOG5 begin_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Sep-23 02:58:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 02:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:58:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 02:58:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0017.fits 2008-Sep-23 02:58:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25127.00 2008-Sep-23 02:58:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0017.fits} 2008-Sep-23 02:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 02:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 02:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 02:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 02:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 02:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 02:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 02:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 02:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.574 (still bad) 2008-Sep-23 02:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.148 (still bad) 2008-Sep-23 02:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.150 (still bad) 2008-Sep-23 02:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.152 (still bad) 2008-Sep-23 02:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.150 (still bad) 2008-Sep-23 02:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.146 (still bad) 2008-Sep-23 02:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 02:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 02:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 02:59:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 02:59:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.972 0.954 0.938 2008-Sep-23 02:59:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.015 1.143 1.080 2008-Sep-23 02:59:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.947 0.919 1.095 2008-Sep-23 02:59:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.917 0.104 2008-Sep-23 02:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 02:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 02:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 02:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 02:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 02:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 02:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:00:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 03:00:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:00:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.979 0.955 0.938 2008-Sep-23 03:00:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.016 1.137 1.075 2008-Sep-23 03:00:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.949 0.920 1.094 2008-Sep-23 03:00:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.916 0.104 2008-Sep-23 03:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:00:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 03:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.131 (still bad) 2008-Sep-23 03:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 03:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:01:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:01:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.973 0.954 0.935 2008-Sep-23 03:01:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.016 1.136 1.078 2008-Sep-23 03:01:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.944 0.919 1.094 2008-Sep-23 03:01:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.915 0.104 2008-Sep-23 03:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:01:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 03:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.132 (still bad) 2008-Sep-23 03:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:02:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:02:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.974 0.954 0.935 2008-Sep-23 03:02:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.018 1.136 1.075 2008-Sep-23 03:02:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.943 0.918 1.095 2008-Sep-23 03:02:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.916 0.104 2008-Sep-23 03:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:03:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:03:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.978 0.953 0.935 2008-Sep-23 03:03:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.017 1.140 1.077 2008-Sep-23 03:03:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.946 0.919 1.095 2008-Sep-23 03:03:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.917 0.104 2008-Sep-23 03:03:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 03:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:04:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 03:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:04:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:04:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.973 0.952 0.932 2008-Sep-23 03:04:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.017 1.138 1.075 2008-Sep-23 03:04:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.940 0.917 1.094 2008-Sep-23 03:04:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.094 0.916 0.104 2008-Sep-23 03:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:04:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 03:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:05:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 03:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:05:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:05:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.973 0.953 0.933 2008-Sep-23 03:05:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.016 1.137 1.074 2008-Sep-23 03:05:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.942 0.921 1.094 2008-Sep-23 03:05:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.919 0.104 2008-Sep-23 03:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:06:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 03:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:06:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 03:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 03:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 03:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 03:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 03:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.147 (still bad) 2008-Sep-23 03:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 03:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 03:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:06:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:06:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.974 0.953 0.934 2008-Sep-23 03:06:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.014 1.138 1.075 2008-Sep-23 03:06:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.940 0.918 1.094 2008-Sep-23 03:06:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.916 0.104 2008-Sep-23 03:06:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 03:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 03:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:07:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:07:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.977 0.954 0.933 2008-Sep-23 03:07:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.017 1.137 1.074 2008-Sep-23 03:07:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.938 0.922 1.097 2008-Sep-23 03:07:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.917 0.104 2008-Sep-23 03:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:08:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 03:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:08:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:08:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 03:08:47 LOG5 end_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2008-Sep-23 03:08:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 03:08:47 LOG5 end_task: Level: (2) ID = <10449> Status = 0 0 0 0 ok 2008-Sep-23 03:08:47 LOG1 fixed_driftmap: New position: year = 2008.7313650911349 RA = 02:51:17.8 RA/Dec = 02:51:47.8 +10:30:10.3 2008-Sep-23 03:08:47 NOTE fixed_driftmap: Correcting ZA to 7:51:03.4 ... 2008-Sep-23 03:08:47 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8509362911 -CF 2008-Sep-23 03:08:47 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 03:08:47 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 03:08:47 LOG5 begin_task: Level: (2) ID = <10451> Status = 0 0 0 0 ok 2008-Sep-23 03:08:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 03:08:47 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 03:08:47 LOG5 begin_task: Level: (3) ID = <10452> Status = 0 0 0 0 ok 2008-Sep-23 03:08:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 03:08:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 03:08:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 03:08:47 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 03:08:47 LOG5 begin_task: Level: (4) ID = <10453> Status = 0 0 0 0 ok 2008-Sep-23 03:08:47 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8509362911 -CF 2008-Sep-23 03:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:08:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:08:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 03:08:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 03:08:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:08:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 03:08:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 03:08:47 LOG5 end_task: Level: (4) ID = <10453> Status = 0 0 0 0 ok 2008-Sep-23 03:08:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 03:08:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 03:08:47 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 03:08:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 03:08:47 LOG5 begin_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Sep-23 03:08:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:08:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 03:08:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 03:08:48 LOG5 end_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Sep-23 03:08:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 03:08:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 03:08:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 03:08:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 03:08:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 03:08:48 LOG5 begin_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Sep-23 03:08:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 03:08:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 03:08:48 LOG5 end_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Sep-23 03:08:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 03:08:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 03:08:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 03:08:48 LOG5 end_task: Level: (3) ID = <10452> Status = 0 0 0 0 ok 2008-Sep-23 03:08:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 03:08:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 03:08:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 03:08:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 03:08:48 LOG5 begin_task: Level: (3) ID = <10456> Status = 0 0 0 0 ok 2008-Sep-23 03:08:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 03:08:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 03:08:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 03:08:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 03:08:48 LOG5 end_task: Level: (3) ID = <10456> Status = 0 0 0 0 ok 2008-Sep-23 03:08:48 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 03:08:48 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 03:08:48 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 03:08:48 LOG5 begin_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Sep-23 03:08:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 03:08:48 INFO2 take_data: Starting WAPP scan: 826700037 2008-Sep-23 03:08:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 03:08:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 03:08:48 LOG5 begin_task: Level: (4) ID = <10458> Status = 0 0 0 0 ok 2008-Sep-23 03:08:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:08:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25729.00 2008-Sep-23 03:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:08:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:08:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 03:08:50 LOG5 end_task: Level: (4) ID = <10458> Status = 0 0 0 0 ok 2008-Sep-23 03:08:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 03:08:50 LOG5 end_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Sep-23 03:08:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 03:08:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 03:08:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 03:08:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 03:08:50 LOG5 begin_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Sep-23 03:08:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 03:08:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 03:08:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 03:08:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 03:08:51 LOG5 end_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2008-Sep-23 03:08:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 03:08:51 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 03:08:51 LOG5 finish_task: Level: (2) ID = <10451> Status = 0 0 0 0 ok 2008-Sep-23 03:08:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 03:08:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 03:08:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 03:08:51 LOG5 end_task: Level: (2) ID = <10451> Status = 0 0 0 0 ok 2008-Sep-23 03:08:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 30 of 99 2008-Sep-23 03:08:51 LOG4 send_obs_status: To obs_status: <1> LOOP 30 2008-Sep-23 03:08:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 03:08:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 03:08:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 03:08:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 03:08:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 03:08:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 03:08:51 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 03:08:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 03:08:51 LOG5 begin_task: Level: (2) ID = <10460> Status = 0 0 0 0 ok 2008-Sep-23 03:08:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 03:08:51 INFO2 take_data: Starting WAPP scan: 826700038 2008-Sep-23 03:08:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 03:08:51 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 03:08:51 LOG5 begin_task: Level: (3) ID = <10461> Status = 0 0 0 0 ok 2008-Sep-23 03:08:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 03:08:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:08:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25732.00 2008-Sep-23 03:08:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0018.fits 2008-Sep-23 03:08:51 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0018.fits} 2008-Sep-23 03:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.577 (still bad) 2008-Sep-23 03:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:08:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:08:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.979 0.955 0.934 2008-Sep-23 03:08:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.018 1.139 1.075 2008-Sep-23 03:08:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.941 0.923 1.095 2008-Sep-23 03:08:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.916 0.104 2008-Sep-23 03:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:09:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:09:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.977 0.954 0.934 2008-Sep-23 03:09:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.014 1.137 1.074 2008-Sep-23 03:09:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.937 0.918 1.094 2008-Sep-23 03:09:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.918 0.104 2008-Sep-23 03:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:10:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:10:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.976 0.953 0.934 2008-Sep-23 03:10:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.015 1.134 1.072 2008-Sep-23 03:10:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.937 0.919 1.094 2008-Sep-23 03:10:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.914 0.104 2008-Sep-23 03:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:11:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:11:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.979 0.954 0.936 2008-Sep-23 03:11:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.014 1.138 1.074 2008-Sep-23 03:11:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.940 0.922 1.095 2008-Sep-23 03:11:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.094 0.915 0.104 2008-Sep-23 03:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:12:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 03:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 03:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.143 (still bad) 2008-Sep-23 03:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 03:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.142 (still bad) 2008-Sep-23 03:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 03:12:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 03:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:12:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:12:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.977 0.954 0.936 2008-Sep-23 03:12:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.014 1.135 1.075 2008-Sep-23 03:12:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.937 0.923 1.097 2008-Sep-23 03:12:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.917 0.104 2008-Sep-23 03:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.141 (still bad) 2008-Sep-23 03:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.145 (still bad) 2008-Sep-23 03:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.149 (still bad) 2008-Sep-23 03:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.154 (still bad) 2008-Sep-23 03:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.157 (still bad) 2008-Sep-23 03:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.159 (still bad) 2008-Sep-23 03:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.157 (still bad) 2008-Sep-23 03:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.152 (still bad) 2008-Sep-23 03:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.149 (still bad) 2008-Sep-23 03:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.144 (still bad) 2008-Sep-23 03:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:14:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:14:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.979 0.955 0.936 2008-Sep-23 03:14:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.017 1.136 1.075 2008-Sep-23 03:14:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.934 0.922 1.092 2008-Sep-23 03:14:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.094 0.915 0.104 2008-Sep-23 03:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.140 (still bad) 2008-Sep-23 03:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:14:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999964)! 2008-Sep-23 03:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:14:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999964)! 2008-Sep-23 03:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:14:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 03:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:15:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:15:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.983 0.957 0.938 2008-Sep-23 03:15:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.017 1.135 1.074 2008-Sep-23 03:15:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.934 0.923 1.095 2008-Sep-23 03:15:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.917 0.104 2008-Sep-23 03:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:15:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 03:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:16:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:16:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.983 0.957 0.937 2008-Sep-23 03:16:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.022 1.137 1.074 2008-Sep-23 03:16:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.937 0.921 1.093 2008-Sep-23 03:16:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.094 0.918 0.105 2008-Sep-23 03:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 03:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.137 (still bad) 2008-Sep-23 03:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.136 (still bad) 2008-Sep-23 03:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 03:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:17:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 03:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:17:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:17:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.980 0.956 0.938 2008-Sep-23 03:17:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.021 1.136 1.074 2008-Sep-23 03:17:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.936 0.920 1.092 2008-Sep-23 03:17:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.094 0.917 0.105 2008-Sep-23 03:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:17:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 03:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.138 (still bad) 2008-Sep-23 03:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.139 (still bad) 2008-Sep-23 03:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:17:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999964)! 2008-Sep-23 03:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:18:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 03:18:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:18:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.981 0.957 0.939 2008-Sep-23 03:18:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.020 1.135 1.073 2008-Sep-23 03:18:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.936 0.922 1.093 2008-Sep-23 03:18:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.094 0.917 0.105 2008-Sep-23 03:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:18:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999964)! 2008-Sep-23 03:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.138 (still bad) 2008-Sep-23 03:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.133 (still bad) 2008-Sep-23 03:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.134 (still bad) 2008-Sep-23 03:18:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:18:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 03:18:52 LOG5 end_task: Level: (3) ID = <10461> Status = 0 0 0 0 ok 2008-Sep-23 03:18:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 03:18:52 LOG5 end_task: Level: (2) ID = <10460> Status = 0 0 0 0 ok 2008-Sep-23 03:18:52 LOG1 fixed_driftmap: New position: year = 2008.7313842307399 RA = 03:01:23.4 RA/Dec = 03:01:53.5 +10:30:04.9 2008-Sep-23 03:18:52 NOTE fixed_driftmap: Correcting ZA to 7:51:08.8 ... 2008-Sep-23 03:18:52 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.8524356595 -CF 2008-Sep-23 03:18:52 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Sep-23 03:18:52 START begin_task: Starting task 'WAPP calibration' 2008-Sep-23 03:18:52 LOG5 begin_task: Level: (2) ID = <10462> Status = 0 0 0 0 ok 2008-Sep-23 03:18:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Sep-23 03:18:52 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 03:18:52 LOG5 begin_task: Level: (3) ID = <10463> Status = 0 0 0 0 ok 2008-Sep-23 03:18:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 03:18:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 03:18:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 03:18:52 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 03:18:52 LOG5 begin_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Sep-23 03:18:52 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.8524356595 -CF 2008-Sep-23 03:18:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:18:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 03:18:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 03:18:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:18:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 03:18:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 03:18:52 LOG5 end_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2008-Sep-23 03:18:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 03:18:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 03:18:52 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 03:18:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 03:18:52 LOG5 begin_task: Level: (4) ID = <10465> Status = 0 0 0 0 ok 2008-Sep-23 03:18:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:18:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 03:18:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 03:18:52 LOG5 end_task: Level: (4) ID = <10465> Status = 0 0 0 0 ok 2008-Sep-23 03:18:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 03:18:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 03:18:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 03:18:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 03:18:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 03:18:52 LOG5 begin_task: Level: (4) ID = <10466> Status = 0 0 0 0 ok 2008-Sep-23 03:18:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 03:18:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 03:18:52 LOG5 end_task: Level: (4) ID = <10466> Status = 0 0 0 0 ok 2008-Sep-23 03:18:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 03:18:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 03:18:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 03:18:52 LOG5 end_task: Level: (3) ID = <10463> Status = 0 0 0 0 ok 2008-Sep-23 03:18:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Sep-23 03:18:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 03:18:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 03:18:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 03:18:53 LOG5 begin_task: Level: (3) ID = <10467> Status = 0 0 0 0 ok 2008-Sep-23 03:18:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 03:18:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 03:18:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 03:18:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 03:18:53 LOG5 end_task: Level: (3) ID = <10467> Status = 0 0 0 0 ok 2008-Sep-23 03:18:53 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Sep-23 03:18:53 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Sep-23 03:18:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 03:18:53 LOG5 begin_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2008-Sep-23 03:18:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 03:18:53 INFO2 take_data: Starting WAPP scan: 826700039 2008-Sep-23 03:18:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Sep-23 03:18:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 03:18:53 LOG5 begin_task: Level: (4) ID = <10469> Status = 0 0 0 0 ok 2008-Sep-23 03:18:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:18:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26334.00 2008-Sep-23 03:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.136 (still bad) 2008-Sep-23 03:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:18:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:18:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:18:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Sep-23 03:18:55 LOG5 end_task: Level: (4) ID = <10469> Status = 0 0 0 0 ok 2008-Sep-23 03:18:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Sep-23 03:18:55 LOG5 end_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2008-Sep-23 03:18:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 03:18:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 03:18:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 03:18:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 03:18:55 LOG5 begin_task: Level: (3) ID = <10470> Status = 0 0 0 0 ok 2008-Sep-23 03:18:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 03:18:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 03:18:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 03:18:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 03:18:55 LOG5 end_task: Level: (3) ID = <10470> Status = 0 0 0 0 ok 2008-Sep-23 03:18:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 03:18:55 STOP finish_task: Finishing task 'WAPP calibration' 2008-Sep-23 03:18:55 LOG5 finish_task: Level: (2) ID = <10462> Status = 0 0 0 0 ok 2008-Sep-23 03:18:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Sep-23 03:18:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 03:18:55 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Sep-23 03:18:55 LOG5 end_task: Level: (2) ID = <10462> Status = 0 0 0 0 ok 2008-Sep-23 03:18:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 31 of 99 2008-Sep-23 03:18:56 LOG4 send_obs_status: To obs_status: <1> LOOP 31 2008-Sep-23 03:18:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 03:18:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 03:18:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 03:18:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 03:18:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Sep-23 03:18:56 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Sep-23 03:18:56 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Sep-23 03:18:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Sep-23 03:18:56 LOG5 begin_task: Level: (2) ID = <10471> Status = 0 0 0 0 ok 2008-Sep-23 03:18:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Sep-23 03:18:56 INFO2 take_data: Starting WAPP scan: 826700040 2008-Sep-23 03:18:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Sep-23 03:18:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Sep-23 03:18:56 LOG5 begin_task: Level: (3) ID = <10472> Status = 0 0 0 0 ok 2008-Sep-23 03:18:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 03:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.575 (still bad) 2008-Sep-23 03:18:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:18:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26337.00 2008-Sep-23 03:18:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0019.fits 2008-Sep-23 03:18:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0019.fits} 2008-Sep-23 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.447 (still bad) 2008-Sep-23 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.135 (still bad) 2008-Sep-23 03:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.137 (still bad) 2008-Sep-23 03:19:05 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Sep-23 03:19:05 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Sep-23 03:19:05 WARNING abort_task: WARNING abort requested! 2008-Sep-23 03:19:05 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2008-Sep-23 03:19:05 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2008-Sep-23 03:19:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2008-Sep-23 03:19:05 LOG5 end_task: Level: (3) ID = <10472> Status = 1 0 0 0 abort 2008-Sep-23 03:19:05 START begin_task: Starting task 'stopping the WAPPs' 2008-Sep-23 03:19:05 LOG5 begin_task: Level: (3) ID = <10473> Status = 1 0 0 0 abort 2008-Sep-23 03:19:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Sep-23 03:19:05 INFO1 stop_wapp: Stopping the WAPPs 2008-Sep-23 03:19:05 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Sep-23 03:19:05 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Sep-23 03:19:05 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Sep-23 03:19:05 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Sep-23 03:19:05 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Sep-23 03:19:05 LOG5 begin_task: Level: (4) ID = <10474> Status = 1 0 0 0 abort 2008-Sep-23 03:19:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Sep-23 03:19:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:19:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.047 0.982 0.958 0.939 2008-Sep-23 03:19:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.022 1.135 1.074 2008-Sep-23 03:19:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.939 0.945 0.925 1.094 2008-Sep-23 03:19:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.094 0.920 0.104 2008-Sep-23 03:19:07 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2008-Sep-23 03:19:07 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2008-Sep-23 03:19:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:19:07 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-Sep-23 03:19:07 LOG5 end_task: Level: (4) ID = <10474> Status = 1 0 0 0 abort 2008-Sep-23 03:19:07 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-Sep-23 03:19:07 LOG5 end_task: Level: (3) ID = <10473> Status = 1 0 0 0 abort 2008-Sep-23 03:19:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2008-Sep-23 03:19:07 LOG5 end_task: Level: (2) ID = <10471> Status = 1 0 0 0 abort 2008-Sep-23 03:19:07 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Sep-23 03:19:07 LOG5 finish_task: Level: (1) ID = <10126> Status = 1 0 0 0 abort 2008-Sep-23 03:19:07 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-Sep-23 03:19:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Sep-23 03:19:07 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-Sep-23 03:19:07 LOG5 end_task: Level: (1) ID = <10126> Status = 1 0 0 0 abort 2008-Sep-23 03:19:11 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Sep-23 03:19:11 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Sep-23 03:19:11 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Sep-23 03:19:11 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Sep-23 03:19:11 LOG5 begin_task: Level: (1) ID = <10475> Status = 0 0 0 0 ok 2008-Sep-23 03:19:11 NOTE restart_wapp: Restarting all WAPPs 2008-Sep-23 03:19:11 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Sep-23 03:19:12 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Sep-23 03:19:12 LOG5 end_task: Level: (1) ID = <10475> Status = 0 0 0 0 ok 2008-Sep-23 03:19:12 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Sep-23 03:19:12 LOG3 exec_msg: Closing socket 2008-Sep-23 03:19:12 LOG3 exec_msg: Closing socket 2008-Sep-23 03:19:12 LOG3 exec_msg: Closing socket 2008-Sep-23 03:19:12 LOG3 exec_msg: Closing socket 2008-Sep-23 03:19:14 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Sep-23 03:19:14 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Sep-23 03:19:14 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Sep-23 03:19:14 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Sep-23 03:19:18 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Sep-23 03:19:24 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos ' to executive ... 2008-Sep-23 03:19:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 6 {LOAD togs.conf} 2008-Sep-23 03:19:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 7 {TRACKCURPOS} 2008-Sep-23 03:19:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 8 {ALFAANGLE 19} 2008-Sep-23 03:19:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Sep-23 03:19:24 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Sep-23 03:19:24 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos 1 1 4 2008-Sep-23 03:19:24 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos 1 1 4' 2008-Sep-23 03:19:24 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos'' 2008-Sep-23 03:19:24 LOG5 begin_task: Level: (1) ID = <10476> Status = 0 0 0 0 ok 2008-Sep-23 03:19:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos' ...} 2008-Sep-23 03:19:24 NOTE run_command_file: Starting execution of command file 'command_galfacurpos' from line 1 2008-Sep-23 03:19:25 COMMAND run_command_line: EXECUTING command 6: 'LOAD togs.conf' 2008-Sep-23 03:19:25 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Sep-23 03:19:25 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Sep-23 03:19:25 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Sep-23 03:19:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Sep-23 03:19:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Sep-23 03:19:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Sep-23 03:19:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Sep-23 03:19:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Sep-23 03:19:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Sep-23 03:19:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Sep-23 03:19:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Sep-23 03:19:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Sep-23 03:19:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Sep-23 03:19:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Sep-23 03:19:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Sep-23 03:19:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Sep-23 03:19:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Sep-23 03:19:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Sep-23 03:19:27 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Sep-23 03:19:27 LOG5 begin_task: Level: (2) ID = <10477> Status = 0 0 0 0 ok 2008-Sep-23 03:19:27 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Sep-23 03:19:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Sep-23 03:19:27 LOG1 config_iflo: Receiver ALFA already selected 2008-Sep-23 03:19:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 03:19:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 03:19:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 03:19:27 LOG5 begin_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2008-Sep-23 03:19:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 03:19:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 03:19:27 LOG5 end_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2008-Sep-23 03:19:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 03:19:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 03:19:27 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Sep-23 03:19:27 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Sep-23 03:19:27 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Sep-23 03:19:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Sep-23 03:19:27 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Sep-23 03:19:27 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Sep-23 03:19:27 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Sep-23 03:19:27 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Sep-23 03:19:27 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Sep-23 03:19:27 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Sep-23 03:19:27 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Sep-23 03:19:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Sep-23 03:19:27 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Sep-23 03:19:27 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Sep-23 03:19:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Sep-23 03:19:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 03:19:27 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Sep-23 03:19:27 LOG5 begin_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Sep-23 03:19:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-23 03:19:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Sep-23 03:19:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:19:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 03:19:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:28 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Sep-23 03:19:28 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Sep-23 03:19:28 LOG5 end_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Sep-23 03:19:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Sep-23 03:19:28 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Sep-23 03:19:28 LOG5 finish_task: Level: (2) ID = <10477> Status = 0 0 0 0 ok 2008-Sep-23 03:19:28 DONE finish_task: DONE finished configuration: IF/LO path 2008-Sep-23 03:19:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-23 03:19:28 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Sep-23 03:19:28 LOG5 end_task: Level: (2) ID = <10477> Status = 0 0 0 0 ok 2008-Sep-23 03:19:28 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Sep-23 03:19:28 LOG5 begin_task: Level: (2) ID = <10480> Status = 0 0 0 0 ok 2008-Sep-23 03:19:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Sep-23 03:19:28 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Sep-23 03:19:28 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Sep-23 03:19:28 START begin_task: Starting task 'selecting calibration port' 2008-Sep-23 03:19:28 LOG5 begin_task: Level: (3) ID = <10481> Status = 0 0 0 0 ok 2008-Sep-23 03:19:28 LOG3 vw_send: To DATATAKING: calport 3 2008-Sep-23 03:19:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Sep-23 03:19:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 03:19:28 START begin_task: Starting task 'waiting on calport' 2008-Sep-23 03:19:28 LOG5 begin_task: Level: (4) ID = <10482> Status = 0 0 0 0 ok 2008-Sep-23 03:19:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:28 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Sep-23 03:19:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 03:19:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 03:19:28 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Sep-23 03:19:28 LOG5 end_task: Level: (4) ID = <10482> Status = 0 0 0 0 ok 2008-Sep-23 03:19:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Sep-23 03:19:28 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Sep-23 03:19:28 LOG5 end_task: Level: (3) ID = <10481> Status = 0 0 0 0 ok 2008-Sep-23 03:19:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 03:19:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 03:19:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 03:19:28 LOG5 begin_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Sep-23 03:19:28 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 03:19:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 03:19:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 03:19:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 03:19:28 LOG5 end_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2008-Sep-23 03:19:28 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Sep-23 03:19:28 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Sep-23 03:19:28 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Sep-23 03:19:28 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Sep-23 03:19:28 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Sep-23 03:19:28 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Sep-23 03:19:28 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Sep-23 03:19:28 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Sep-23 03:19:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 03:19:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 03:19:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 03:19:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 03:19:28 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Sep-23 03:19:28 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Sep-23 03:19:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 03:19:29 LOG5 begin_task: Level: (3) ID = <10484> Status = 0 0 0 0 ok 2008-Sep-23 03:19:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Sep-23 03:19:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Sep-23 03:19:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 03:19:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 03:19:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 03:19:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 03:19:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 03:19:29 LOG5 end_task: Level: (3) ID = <10484> Status = 0 0 0 0 ok 2008-Sep-23 03:19:29 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Sep-23 03:19:29 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Sep-23 03:19:29 LOG5 finish_task: Level: (2) ID = <10480> Status = 0 0 0 0 ok 2008-Sep-23 03:19:29 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Sep-23 03:19:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-23 03:19:29 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Sep-23 03:19:29 LOG5 end_task: Level: (2) ID = <10480> Status = 0 0 0 0 ok 2008-Sep-23 03:19:29 COMMAND run_command_line: EXECUTING command 7: 'TRACKCURPOS' 2008-Sep-23 03:19:29 BEGIN begin_task: Starting task 'tracking current position' 2008-Sep-23 03:19:29 LOG5 begin_task: Level: (2) ID = <10485> Status = 0 0 0 0 ok 2008-Sep-23 03:19:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2008-Sep-23 03:19:29 INFO1 track_current_pos: Starting to track the current commanded position RA = 03:02:00.5 and Dec = +10:27:49.1 2008-Sep-23 03:19:29 LOG3 track_source: Calling 'track_source Cur-pos 030200.5 102749.1 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Sep-23 03:19:29 START begin_task: Starting task 'sending tracking commands' 2008-Sep-23 03:19:29 LOG5 begin_task: Level: (3) ID = <10486> Status = 0 0 0 0 ok 2008-Sep-23 03:19:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2008-Sep-23 03:19:29 INFO1 track_source: Starting to track Cur-pos 2008-Sep-23 03:19:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2008-Sep-23 03:19:29 LOG3 vw_send: To DATATAKING: set ra 030200.5 2008-Sep-23 03:19:29 LOG3 vw_send: To DATATAKING: set dec 102749.1 2008-Sep-23 03:19:29 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Sep-23 03:19:29 LOG3 vw_send: To DATATAKING: pnt tr 030200.5 102749.1 -CJ 2008-Sep-23 03:19:29 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Sep-23 03:19:29 STOP finish_task: Finishing task 'sending tracking commands' 2008-Sep-23 03:19:29 LOG5 finish_task: Level: (3) ID = <10486> Status = 0 0 0 0 ok 2008-Sep-23 03:19:29 INFO2 finish_task: DONE finished sending: tracking commands 2008-Sep-23 03:19:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 03:19:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Sep-23 03:19:29 LOG5 end_task: Level: (3) ID = <10486> Status = 0 0 0 0 ok 2008-Sep-23 03:19:29 START begin_task: Starting task 'waiting on telescope' 2008-Sep-23 03:19:29 LOG5 begin_task: Level: (3) ID = <10487> Status = 0 0 0 0 ok 2008-Sep-23 03:19:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Sep-23 03:19:29 LOG3 waittrk: Start waittrk 5 2008-Sep-23 03:19:29 START begin_task: Starting task 'waiting on telescope movement' 2008-Sep-23 03:19:29 LOG5 begin_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2008-Sep-23 03:19:29 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Sep-23 03:19:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2008-Sep-23 03:19:29 LOG4 got_cormsg: From DATATAKING: set ra 030200.5 2008-Sep-23 03:19:29 LOG4 got_cormsg: From DATATAKING: set dec 102749.1 2008-Sep-23 03:19:29 LOG4 got_cormsg: From DATATAKING: vw% 030200.5 2008-Sep-23 03:19:29 LOG4 got_cormsg: From DATATAKING: vw% 102749.1 2008-Sep-23 03:19:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Sep-23 03:19:29 LOG4 got_cormsg: From DATATAKING: pnt tr 030200.5 102749.1 -CJ 2008-Sep-23 03:19:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Sep-23 03:19:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Sep-23 03:19:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Sep-23 03:19:34 LOG5 end_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2008-Sep-23 03:19:34 START begin_task: Starting task 'waiting on telescope on source' 2008-Sep-23 03:19:34 LOG5 begin_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Sep-23 03:19:39 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Sep-23 03:19:39 LOG5 end_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Sep-23 03:19:39 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Sep-23 03:19:39 INFO2 waittrk: Now tracking Cur-pos 2008-Sep-23 03:19:39 LOG4 waittrk: Current telescope position: Az = 359.95 ZA = 7.81 2008-Sep-23 03:19:39 STOP finish_task: Finishing task 'waiting on telescope' 2008-Sep-23 03:19:39 LOG5 finish_task: Level: (3) ID = <10487> Status = 0 0 0 0 ok 2008-Sep-23 03:19:39 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Sep-23 03:19:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 03:19:39 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Sep-23 03:19:39 LOG5 end_task: Level: (3) ID = <10487> Status = 0 0 0 0 ok 2008-Sep-23 03:19:40 STOP finish_task: Finishing task 'tracking current position' 2008-Sep-23 03:19:40 LOG5 finish_task: Level: (2) ID = <10485> Status = 0 0 0 0 ok 2008-Sep-23 03:19:40 DONE finish_task: DONE finished tracking: current position 2008-Sep-23 03:19:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-23 03:19:40 END end_task: Finishing task 'tracking current position' with status 'OK' 2008-Sep-23 03:19:40 LOG5 end_task: Level: (2) ID = <10485> Status = 0 0 0 0 ok 2008-Sep-23 03:19:40 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Sep-23 03:19:40 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Sep-23 03:19:40 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Sep-23 03:19:40 LOG5 begin_task: Level: (2) ID = <10490> Status = 0 0 0 0 ok 2008-Sep-23 03:19:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Sep-23 03:19:40 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Sep-23 03:19:40 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Sep-23 03:19:40 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Sep-23 03:19:40 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Sep-23 03:19:40 LOG5 begin_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2008-Sep-23 03:19:41 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Sep-23 03:19:41 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Sep-23 03:19:41 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Sep-23 03:19:41 LOG5 end_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2008-Sep-23 03:19:41 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Sep-23 03:19:41 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Sep-23 03:19:41 LOG5 finish_task: Level: (2) ID = <10490> Status = 0 0 0 0 ok 2008-Sep-23 03:19:41 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Sep-23 03:19:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-23 03:19:41 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Sep-23 03:19:41 LOG5 end_task: Level: (2) ID = <10490> Status = 0 0 0 0 ok 2008-Sep-23 03:19:41 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Sep-23 03:19:41 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Sep-23 03:19:41 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Sep-23 03:19:41 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Sep-23 03:19:41 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Sep-23 03:19:41 LOG5 begin_task: Level: (2) ID = <10492> Status = 0 0 0 0 ok 2008-Sep-23 03:19:41 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2008-Sep-23 03:19:41 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Sep-23 03:19:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Sep-23 03:19:41 START begin_task: Starting task 'selecting calibration type' 2008-Sep-23 03:19:41 LOG5 begin_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Sep-23 03:19:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Sep-23 03:19:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Sep-23 03:19:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 03:19:41 START begin_task: Starting task 'waiting on setcal' 2008-Sep-23 03:19:41 LOG5 begin_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Sep-23 03:19:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Sep-23 03:19:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 03:19:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 03:19:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Sep-23 03:19:41 LOG5 end_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2008-Sep-23 03:19:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Sep-23 03:19:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 03:19:41 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Sep-23 03:19:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 03:19:41 LOG5 begin_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Sep-23 03:19:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 03:19:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 03:19:41 LOG5 end_task: Level: (4) ID = <10495> Status = 0 0 0 0 ok 2008-Sep-23 03:19:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 03:19:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Sep-23 03:19:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Sep-23 03:19:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Sep-23 03:19:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Sep-23 03:19:41 LOG5 begin_task: Level: (4) ID = <10496> Status = 0 0 0 0 ok 2008-Sep-23 03:19:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Sep-23 03:19:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Sep-23 03:19:41 LOG5 end_task: Level: (4) ID = <10496> Status = 0 0 0 0 ok 2008-Sep-23 03:19:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Sep-23 03:19:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Sep-23 03:19:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Sep-23 03:19:42 LOG5 end_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Sep-23 03:19:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Sep-23 03:19:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Sep-23 03:19:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Sep-23 03:19:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Sep-23 03:19:42 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Sep-23 03:19:42 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Sep-23 03:19:42 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 03:19:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 03:19:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 03:19:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 03:19:42 LOG5 begin_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2008-Sep-23 03:19:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Sep-23 03:19:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 03:19:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 03:19:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 03:19:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 03:19:42 LOG5 end_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2008-Sep-23 03:19:42 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Sep-23 03:19:42 START begin_task: Starting task 'adjusting WAPP power' 2008-Sep-23 03:19:42 LOG5 begin_task: Level: (3) ID = <10498> Status = 0 0 0 0 ok 2008-Sep-23 03:19:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Sep-23 03:19:42 INFO2 adjust_power: Starting to adjust WAPP power 2008-Sep-23 03:19:42 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Sep-23 03:19:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Sep-23 03:19:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 03:19:42 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Sep-23 03:19:42 LOG5 begin_task: Level: (4) ID = <10499> Status = 0 0 0 0 ok 2008-Sep-23 03:19:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Sep-23 03:19:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Sep-23 03:19:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20080923.a2010.0020.fits 2008-Sep-23 03:19:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080923.a2010.0020.fits} 2008-Sep-23 03:19:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:45 LOG4 got_cormsg: From DATATAKING: DONE 2008-Sep-23 03:19:45 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Sep-23 03:19:45 LOG5 end_task: Level: (4) ID = <10499> Status = 0 0 0 0 ok 2008-Sep-23 03:19:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Sep-23 03:19:45 START begin_task: Starting task 'adjusting WAPP power' 2008-Sep-23 03:19:45 LOG5 begin_task: Level: (4) ID = <10500> Status = 0 0 0 0 ok 2008-Sep-23 03:19:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Sep-23 03:19:45 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-23 03:19:45 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-23 03:19:45 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-23 03:19:45 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Sep-23 03:19:45 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Sep-23 03:19:45 LOG5 begin_task: Level: (5) ID = <10501> Status = 0 0 0 0 ok 2008-Sep-23 03:19:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Sep-23 03:19:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:46 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Sep-23 03:19:46 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 4 dB 2008-Sep-23 03:19:46 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 2 dB 2008-Sep-23 03:19:46 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Sep-23 03:19:46 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Sep-23 03:19:46 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Sep-23 03:19:46 LOG5 end_task: Level: (5) ID = <10501> Status = 0 0 0 0 ok 2008-Sep-23 03:19:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.048 0.978 ALFA beam 1: 0.962 0.942 2008-Sep-23 03:19:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.087 1.000 ALFA beam 3: 0.894 1.051 2008-Sep-23 03:19:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.920 0.918 ALFA beam 5: 0.925 1.092 2008-Sep-23 03:19:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.022 0.092 ALFA beam 7: 0.906 0.102 2008-Sep-23 03:19:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Sep-23 03:19:46 LOG5 finish_task: Level: (4) ID = <10500> Status = 0 0 0 0 ok 2008-Sep-23 03:19:46 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Sep-23 03:19:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 03:19:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Sep-23 03:19:46 LOG5 end_task: Level: (4) ID = <10500> Status = 0 0 0 0 ok 2008-Sep-23 03:19:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Sep-23 03:19:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Sep-23 03:19:46 LOG5 finish_task: Level: (3) ID = <10498> Status = 0 0 0 0 ok 2008-Sep-23 03:19:46 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Sep-23 03:19:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Sep-23 03:19:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Sep-23 03:19:46 LOG5 end_task: Level: (3) ID = <10498> Status = 0 0 0 0 ok 2008-Sep-23 03:19:46 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Sep-23 03:19:46 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Sep-23 03:19:46 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Sep-23 03:19:46 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:19:46 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:19:46 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:19:46 LOG2 antvel: Parameters to Doppler: Topocentric 26385 2008 267 0.0 2008-Sep-23 03:19:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:19:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Sep-23 03:19:46 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Sep-23 03:19:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:19:46 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:19:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-23 03:19:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:19:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:19:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:19:46 LOG5 begin_task: Level: (3) ID = <10502> Status = 0 0 0 0 ok 2008-Sep-23 03:19:46 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.046342 2008.7313859418966 18.999933 2008-Sep-23 03:19:46 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222748 10.463638888888896 2008-Sep-23 03:19:46 LOG4 log_alfabeam: ALFABEAM 1 3.032365092892018 10.568507257285782 2008-Sep-23 03:19:46 LOG4 log_alfabeam: ALFABEAM 2 3.027658609127259 10.499550183385814 2008-Sep-23 03:19:46 LOG4 log_alfabeam: ALFABEAM 3 3.028715485787887 10.394544026798009 2008-Sep-23 03:19:46 LOG4 log_alfabeam: ALFABEAM 4 3.034609933326421 10.358804210515823 2008-Sep-23 03:19:46 LOG4 log_alfabeam: ALFABEAM 5 3.039336511596905 10.428641996417690 2008-Sep-23 03:19:46 LOG4 log_alfabeam: ALFABEAM 6 3.038148624678801 10.533330359527191 2008-Sep-23 03:19:46 INFO2 take_data: Starting WAPP+GALFA scan: 826700041 2008-Sep-23 03:19:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:19:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:19:47 LOG5 begin_task: Level: (4) ID = <10503> Status = 0 0 0 0 ok 2008-Sep-23 03:19:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:19:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-23 03:19:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:19:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26388.00 2008-Sep-23 03:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.092 and 1.092 (still bad) 2008-Sep-23 03:19:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 03:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 03:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 03:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.129 (still bad) 2008-Sep-23 03:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 03:19:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:19:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:19:58 LOG5 end_task: Level: (4) ID = <10503> Status = 0 0 0 0 ok 2008-Sep-23 03:19:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:19:58 LOG5 end_task: Level: (3) ID = <10502> Status = 0 0 0 0 ok 2008-Sep-23 03:19:58 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Sep-23 03:19:58 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Sep-23 03:19:58 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Sep-23 03:19:58 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:19:58 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:19:58 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:19:58 LOG2 antvel: Parameters to Doppler: Topocentric 26398 2008 267 0.0 2008-Sep-23 03:19:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:19:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Sep-23 03:19:58 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Sep-23 03:19:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:19:58 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:19:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-23 03:19:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:19:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:19:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:19:58 LOG5 begin_task: Level: (3) ID = <10504> Status = 0 0 0 0 ok 2008-Sep-23 03:19:58 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.049963 2008.7313863538418 18.999933 2008-Sep-23 03:19:58 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222386 10.463638888888887 2008-Sep-23 03:19:58 LOG4 log_alfabeam: ALFABEAM 1 3.032411922019151 10.568612464751624 2008-Sep-23 03:19:58 LOG4 log_alfabeam: ALFABEAM 2 3.027674752496431 10.500113755345525 2008-Sep-23 03:19:58 LOG4 log_alfabeam: ALFABEAM 3 3.028684766409656 10.395007283063503 2008-Sep-23 03:19:58 LOG4 log_alfabeam: ALFABEAM 4 3.034563147180620 10.358696029225612 2008-Sep-23 03:19:58 LOG4 log_alfabeam: ALFABEAM 5 3.039320763703636 10.428073405985533 2008-Sep-23 03:19:58 LOG4 log_alfabeam: ALFABEAM 6 3.038179625733443 10.532874836156074 2008-Sep-23 03:19:58 INFO2 take_data: Starting WAPP+GALFA scan: 826700042 2008-Sep-23 03:19:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:19:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:19:59 LOG5 begin_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Sep-23 03:19:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:19:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-23 03:19:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:19:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 03:19:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26400.00 2008-Sep-23 03:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.130 (still bad) 2008-Sep-23 03:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.113 (still bad) 2008-Sep-23 03:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.113 (still bad) 2008-Sep-23 03:20:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 03:20:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 0.996 0.986 0.955 2008-Sep-23 03:20:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.100 1.033 0.939 1.089 2008-Sep-23 03:20:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 0.952 0.962 1.113 2008-Sep-23 03:20:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.095 0.929 0.105 2008-Sep-23 03:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.113 (still bad) 2008-Sep-23 03:20:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:20:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:20:10 LOG5 end_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2008-Sep-23 03:20:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:20:10 LOG5 end_task: Level: (3) ID = <10504> Status = 0 0 0 0 ok 2008-Sep-23 03:20:10 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Sep-23 03:20:10 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Sep-23 03:20:10 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Sep-23 03:20:10 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:20:10 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:20:10 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:20:10 LOG2 antvel: Parameters to Doppler: Topocentric 26410 2008 267 0.0 2008-Sep-23 03:20:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:20:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Sep-23 03:20:10 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Sep-23 03:20:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:20:10 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:20:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-23 03:20:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:20:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:20:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:20:10 LOG5 begin_task: Level: (3) ID = <10506> Status = 0 0 0 0 ok 2008-Sep-23 03:20:10 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.053305 2008.7313867340988 18.999933 2008-Sep-23 03:20:10 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222328 10.463638888888887 2008-Sep-23 03:20:10 LOG4 log_alfabeam: ALFABEAM 1 3.032455174254238 10.568705510567110 2008-Sep-23 03:20:10 LOG4 log_alfabeam: ALFABEAM 2 3.027689870721049 10.500632378004081 2008-Sep-23 03:20:10 LOG4 log_alfabeam: ALFABEAM 3 3.028656605238375 10.395437381385717 2008-Sep-23 03:20:10 LOG4 log_alfabeam: ALFABEAM 4 3.034519932251363 10.358600234708646 2008-Sep-23 03:20:10 LOG4 log_alfabeam: ALFABEAM 5 3.039306006414277 10.427550081581728 2008-Sep-23 03:20:10 LOG4 log_alfabeam: ALFABEAM 6 3.038208052907128 10.532451823231710 2008-Sep-23 03:20:10 INFO2 take_data: Starting WAPP+GALFA scan: 826700043 2008-Sep-23 03:20:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:20:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:20:11 LOG5 begin_task: Level: (4) ID = <10507> Status = 0 0 0 0 ok 2008-Sep-23 03:20:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:20:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-23 03:20:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:20:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:20:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:20:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26412.00 2008-Sep-23 03:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.113 (still bad) 2008-Sep-23 03:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.113 (still bad) 2008-Sep-23 03:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.111 (still bad) 2008-Sep-23 03:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.112 (still bad) 2008-Sep-23 03:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.111 (still bad) 2008-Sep-23 03:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.111 (still bad) 2008-Sep-23 03:20:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:20:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:20:22 LOG5 end_task: Level: (4) ID = <10507> Status = 0 0 0 0 ok 2008-Sep-23 03:20:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:20:22 LOG5 end_task: Level: (3) ID = <10506> Status = 0 0 0 0 ok 2008-Sep-23 03:20:22 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Sep-23 03:20:22 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Sep-23 03:20:22 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Sep-23 03:20:22 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:20:22 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:20:22 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:20:22 LOG2 antvel: Parameters to Doppler: Topocentric 26422 2008 267 0.0 2008-Sep-23 03:20:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:20:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Sep-23 03:20:22 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Sep-23 03:20:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:20:22 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:20:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-23 03:20:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:20:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:20:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:20:22 LOG5 begin_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2008-Sep-23 03:20:22 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.056648 2008.731387114356 18.999933 2008-Sep-23 03:20:22 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222472 10.463638888888893 2008-Sep-23 03:20:22 LOG4 log_alfabeam: ALFABEAM 1 3.032498464397383 10.568794681663658 2008-Sep-23 03:20:22 LOG4 log_alfabeam: ALFABEAM 2 3.027705201559154 10.501149630900651 2008-Sep-23 03:20:22 LOG4 log_alfabeam: ALFABEAM 3 3.028628622484097 10.395869991301661 2008-Sep-23 03:20:22 LOG4 log_alfabeam: ALFABEAM 4 3.034476677149083 10.358508310888777 2008-Sep-23 03:20:22 LOG4 log_alfabeam: ALFABEAM 5 3.039291032632684 10.427028059517204 2008-Sep-23 03:20:22 LOG4 log_alfabeam: ALFABEAM 6 3.038236307467559 10.532026249567254 2008-Sep-23 03:20:22 INFO2 take_data: Starting WAPP+GALFA scan: 826700044 2008-Sep-23 03:20:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:20:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:20:23 LOG5 begin_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Sep-23 03:20:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:20:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-23 03:20:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:20:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:20:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:20:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26424.00 2008-Sep-23 03:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.111 (still bad) 2008-Sep-23 03:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.102 (still bad) 2008-Sep-23 03:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.103 (still bad) 2008-Sep-23 03:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.103 (still bad) 2008-Sep-23 03:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.103 (still bad) 2008-Sep-23 03:20:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:20:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:20:34 LOG5 end_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Sep-23 03:20:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:20:34 LOG5 end_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2008-Sep-23 03:20:34 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Sep-23 03:20:34 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Sep-23 03:20:34 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Sep-23 03:20:34 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:20:34 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:20:34 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:20:34 LOG2 antvel: Parameters to Doppler: Topocentric 26434 2008 267 0.0 2008-Sep-23 03:20:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:20:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Sep-23 03:20:34 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Sep-23 03:20:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:20:34 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:20:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-23 03:20:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:20:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:20:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:20:34 LOG5 begin_task: Level: (3) ID = <10510> Status = 0 0 0 0 ok 2008-Sep-23 03:20:34 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.059990 2008.731387494613 18.999933 2008-Sep-23 03:20:34 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222341 10.463638888888893 2008-Sep-23 03:20:34 LOG4 log_alfabeam: ALFABEAM 1 3.032541761573638 10.568879918348340 2008-Sep-23 03:20:34 LOG4 log_alfabeam: ALFABEAM 2 3.027720733867702 10.501665147156741 2008-Sep-23 03:20:34 LOG4 log_alfabeam: ALFABEAM 3 3.028600837894348 10.396304801869761 2008-Sep-23 03:20:34 LOG4 log_alfabeam: ALFABEAM 4 3.034433412720511 10.358420319741869 2008-Sep-23 03:20:34 LOG4 log_alfabeam: ALFABEAM 5 3.039275853208146 10.426507710681786 2008-Sep-23 03:20:34 LOG4 log_alfabeam: ALFABEAM 6 3.038264369435395 10.531598420323363 2008-Sep-23 03:20:34 INFO2 take_data: Starting WAPP+GALFA scan: 826700045 2008-Sep-23 03:20:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:20:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:20:35 LOG5 begin_task: Level: (4) ID = <10511> Status = 0 0 0 0 ok 2008-Sep-23 03:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.104 (still bad) 2008-Sep-23 03:20:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:20:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-23 03:20:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:20:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:20:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:20:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26436.00 2008-Sep-23 03:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.088 (still bad) 2008-Sep-23 03:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.088 (still bad) 2008-Sep-23 03:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.087 (still bad) 2008-Sep-23 03:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.089 (still bad) 2008-Sep-23 03:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.088 (still bad) 2008-Sep-23 03:20:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:20:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:20:46 LOG5 end_task: Level: (4) ID = <10511> Status = 0 0 0 0 ok 2008-Sep-23 03:20:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:20:46 LOG5 end_task: Level: (3) ID = <10510> Status = 0 0 0 0 ok 2008-Sep-23 03:20:46 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Sep-23 03:20:46 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Sep-23 03:20:46 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Sep-23 03:20:46 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:20:46 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:20:46 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:20:46 LOG2 antvel: Parameters to Doppler: Topocentric 26446 2008 267 0.0 2008-Sep-23 03:20:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:20:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Sep-23 03:20:46 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Sep-23 03:20:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:20:46 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:20:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-23 03:20:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:20:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:20:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:20:46 LOG5 begin_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Sep-23 03:20:46 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.063333 2008.7313878748701 18.999933 2008-Sep-23 03:20:46 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222324 10.463638888888889 2008-Sep-23 03:20:46 LOG4 log_alfabeam: ALFABEAM 1 3.032585086714922 10.568961266642958 2008-Sep-23 03:20:46 LOG4 log_alfabeam: ALFABEAM 2 3.027736474902358 10.502179178442995 2008-Sep-23 03:20:46 LOG4 log_alfabeam: ALFABEAM 3 3.028573237781128 10.396742020402758 2008-Sep-23 03:20:46 LOG4 log_alfabeam: ALFABEAM 4 3.034390118049395 10.358336214234562 2008-Sep-23 03:20:46 LOG4 log_alfabeam: ALFABEAM 5 3.039260461020621 10.425988781699500 2008-Sep-23 03:20:46 LOG4 log_alfabeam: ALFABEAM 6 3.038292252595480 10.531168130819669 2008-Sep-23 03:20:46 INFO2 take_data: Starting WAPP+GALFA scan: 826700046 2008-Sep-23 03:20:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:20:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:20:47 LOG5 begin_task: Level: (4) ID = <10513> Status = 0 0 0 0 ok 2008-Sep-23 03:20:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:20:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-23 03:20:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:20:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:20:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.087 (still bad) 2008-Sep-23 03:20:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26448.00 2008-Sep-23 03:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.085 (still bad) 2008-Sep-23 03:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.086 (still bad) 2008-Sep-23 03:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.085 (still bad) 2008-Sep-23 03:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.085 (still bad) 2008-Sep-23 03:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.086 (still bad) 2008-Sep-23 03:20:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:20:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:20:58 LOG5 end_task: Level: (4) ID = <10513> Status = 0 0 0 0 ok 2008-Sep-23 03:20:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:20:58 LOG5 end_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Sep-23 03:20:58 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Sep-23 03:20:58 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Sep-23 03:20:58 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Sep-23 03:20:58 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:20:58 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:20:58 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:20:58 LOG2 antvel: Parameters to Doppler: Topocentric 26458 2008 267 0.0 2008-Sep-23 03:20:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:20:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Sep-23 03:20:58 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Sep-23 03:20:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:20:58 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:20:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-23 03:20:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:20:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:20:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:20:58 LOG5 begin_task: Level: (3) ID = <10514> Status = 0 0 0 0 ok 2008-Sep-23 03:20:58 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.066675 2008.7313882551271 18.999933 2008-Sep-23 03:20:58 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222338 10.463638888888887 2008-Sep-23 03:20:58 LOG4 log_alfabeam: ALFABEAM 1 3.032628408925499 10.569038674253422 2008-Sep-23 03:20:58 LOG4 log_alfabeam: ALFABEAM 2 3.027752413138474 10.502691361059277 2008-Sep-23 03:20:58 LOG4 log_alfabeam: ALFABEAM 3 3.028545841523866 10.397181331734194 2008-Sep-23 03:20:58 LOG4 log_alfabeam: ALFABEAM 4 3.034346824009450 10.358256048946682 2008-Sep-23 03:20:58 LOG4 log_alfabeam: ALFABEAM 5 3.039244867311110 10.425471640413637 2008-Sep-23 03:20:58 LOG4 log_alfabeam: ALFABEAM 6 3.038319937325967 10.530735690559645 2008-Sep-23 03:20:58 INFO2 take_data: Starting WAPP+GALFA scan: 826700047 2008-Sep-23 03:20:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:20:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:20:59 LOG5 begin_task: Level: (4) ID = <10515> Status = 0 0 0 0 ok 2008-Sep-23 03:20:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:20:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-23 03:20:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:20:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:20:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:20:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26460.00 2008-Sep-23 03:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.085 (still bad) 2008-Sep-23 03:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.084 (still bad) 2008-Sep-23 03:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.081 (still bad) 2008-Sep-23 03:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.082 (still bad) 2008-Sep-23 03:21:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:21:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.970 0.951 0.933 2008-Sep-23 03:21:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.013 0.897 1.066 2008-Sep-23 03:21:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.926 0.936 0.900 1.079 2008-Sep-23 03:21:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.094 0.913 0.104 2008-Sep-23 03:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.082 (still bad) 2008-Sep-23 03:21:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:21:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:21:10 LOG5 end_task: Level: (4) ID = <10515> Status = 0 0 0 0 ok 2008-Sep-23 03:21:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:21:10 LOG5 end_task: Level: (3) ID = <10514> Status = 0 0 0 0 ok 2008-Sep-23 03:21:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Sep-23 03:21:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 03:21:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 03:21:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 03:21:10 LOG5 begin_task: Level: (3) ID = <10516> Status = 0 0 0 0 ok 2008-Sep-23 03:21:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 03:21:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 03:21:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 03:21:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 03:21:10 LOG5 end_task: Level: (3) ID = <10516> Status = 0 0 0 0 ok 2008-Sep-23 03:21:10 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Sep-23 03:21:10 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Sep-23 03:21:10 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Sep-23 03:21:10 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:21:10 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:21:10 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:21:10 LOG2 antvel: Parameters to Doppler: Topocentric 26470 2008 267 0.0 2008-Sep-23 03:21:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:21:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Sep-23 03:21:10 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Sep-23 03:21:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:21:10 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:21:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-23 03:21:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:21:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:21:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:21:10 LOG5 begin_task: Level: (3) ID = <10517> Status = 0 0 0 0 ok 2008-Sep-23 03:21:10 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.070017 2008.7313886353843 18.999933 2008-Sep-23 03:21:10 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222263 10.463638888888893 2008-Sep-23 03:21:10 LOG4 log_alfabeam: ALFABEAM 1 3.032671736192521 10.569112163831955 2008-Sep-23 03:21:10 LOG4 log_alfabeam: ALFABEAM 2 3.027768551081023 10.503201793529358 2008-Sep-23 03:21:10 LOG4 log_alfabeam: ALFABEAM 3 3.028518643631897 10.397622812046595 2008-Sep-23 03:21:10 LOG4 log_alfabeam: ALFABEAM 4 3.034303522620381 10.358179801037165 2008-Sep-23 03:21:10 LOG4 log_alfabeam: ALFABEAM 5 3.039229069607412 10.424956188083900 2008-Sep-23 03:21:10 LOG4 log_alfabeam: ALFABEAM 6 3.038347429126216 10.530301023953141 2008-Sep-23 03:21:10 INFO2 take_data: Starting WAPP+GALFA scan: 826700048 2008-Sep-23 03:21:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:21:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:21:11 LOG5 begin_task: Level: (4) ID = <10518> Status = 0 0 0 0 ok 2008-Sep-23 03:21:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:21:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-23 03:21:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:21:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:21:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:21:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26472.00 2008-Sep-23 03:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.083 (still bad) 2008-Sep-23 03:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.511 (still bad) 2008-Sep-23 03:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.510 (still bad) 2008-Sep-23 03:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.507 (still bad) 2008-Sep-23 03:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.508 (still bad) 2008-Sep-23 03:21:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:21:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:21:22 LOG5 end_task: Level: (4) ID = <10518> Status = 0 0 0 0 ok 2008-Sep-23 03:21:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:21:22 LOG5 end_task: Level: (3) ID = <10517> Status = 0 0 0 0 ok 2008-Sep-23 03:21:22 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Sep-23 03:21:22 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Sep-23 03:21:22 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Sep-23 03:21:22 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:21:22 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:21:22 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:21:22 LOG2 antvel: Parameters to Doppler: Topocentric 26482 2008 267 0.0 2008-Sep-23 03:21:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:21:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Sep-23 03:21:22 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Sep-23 03:21:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:21:22 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:21:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-23 03:21:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:21:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:21:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:21:22 LOG5 begin_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2008-Sep-23 03:21:22 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.073360 2008.7313890156413 18.999933 2008-Sep-23 03:21:22 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222263 10.463638888888887 2008-Sep-23 03:21:22 LOG4 log_alfabeam: ALFABEAM 1 3.032715076515922 10.569181754697055 2008-Sep-23 03:21:22 LOG4 log_alfabeam: ALFABEAM 2 3.027784891409568 10.503710572983621 2008-Sep-23 03:21:22 LOG4 log_alfabeam: ALFABEAM 3 3.028491638778682 10.398066539465873 2008-Sep-23 03:21:22 LOG4 log_alfabeam: ALFABEAM 4 3.034260205887111 10.358107450996371 2008-Sep-23 03:21:22 LOG4 log_alfabeam: ALFABEAM 5 3.039213065259296 10.424442327314944 2008-Sep-23 03:21:22 LOG4 log_alfabeam: ALFABEAM 6 3.038374733336062 10.529864053427330 2008-Sep-23 03:21:22 INFO2 take_data: Starting WAPP+GALFA scan: 826700049 2008-Sep-23 03:21:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:21:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:21:23 LOG5 begin_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2008-Sep-23 03:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.508 (still bad) 2008-Sep-23 03:21:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:21:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-23 03:21:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:21:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:21:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:21:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26484.00 2008-Sep-23 03:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.507 (still bad) 2008-Sep-23 03:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.506 (still bad) 2008-Sep-23 03:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.504 (still bad) 2008-Sep-23 03:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.504 (still bad) 2008-Sep-23 03:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.506 (still bad) 2008-Sep-23 03:21:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:21:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:21:34 LOG5 end_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2008-Sep-23 03:21:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:21:34 LOG5 end_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2008-Sep-23 03:21:34 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Sep-23 03:21:34 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Sep-23 03:21:34 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Sep-23 03:21:34 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:21:34 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:21:34 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:21:34 LOG2 antvel: Parameters to Doppler: Topocentric 26494 2008 267 0.0 2008-Sep-23 03:21:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:21:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Sep-23 03:21:34 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Sep-23 03:21:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:21:34 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:21:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-23 03:21:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:21:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:21:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:21:34 LOG5 begin_task: Level: (3) ID = <10521> Status = 0 0 0 0 ok 2008-Sep-23 03:21:34 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.076702 2008.7313893958983 18.999933 2008-Sep-23 03:21:34 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222313 10.463638888888893 2008-Sep-23 03:21:34 LOG4 log_alfabeam: ALFABEAM 1 3.032758399011269 10.569247405654883 2008-Sep-23 03:21:34 LOG4 log_alfabeam: ALFABEAM 2 3.027801422046107 10.504217340967291 2008-Sep-23 03:21:34 LOG4 log_alfabeam: ALFABEAM 3 3.028464845767112 10.398512192974659 2008-Sep-23 03:21:34 LOG4 log_alfabeam: ALFABEAM 4 3.034216904679469 10.358039042301714 2008-Sep-23 03:21:34 LOG4 log_alfabeam: ALFABEAM 5 3.039196866075762 10.423930420889942 2008-Sep-23 03:21:34 LOG4 log_alfabeam: ALFABEAM 6 3.038401830893524 10.529425094528490 2008-Sep-23 03:21:34 INFO2 take_data: Starting WAPP+GALFA scan: 826700050 2008-Sep-23 03:21:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:21:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:21:35 LOG5 begin_task: Level: (4) ID = <10522> Status = 0 0 0 0 ok 2008-Sep-23 03:21:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:21:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-23 03:21:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:21:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:21:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.505 (still bad) 2008-Sep-23 03:21:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26496.00 2008-Sep-23 03:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.505 (still bad) 2008-Sep-23 03:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.501 (still bad) 2008-Sep-23 03:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.503 (still bad) 2008-Sep-23 03:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.502 (still bad) 2008-Sep-23 03:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.503 (still bad) 2008-Sep-23 03:21:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:21:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:21:46 LOG5 end_task: Level: (4) ID = <10522> Status = 0 0 0 0 ok 2008-Sep-23 03:21:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:21:46 LOG5 end_task: Level: (3) ID = <10521> Status = 0 0 0 0 ok 2008-Sep-23 03:21:46 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Sep-23 03:21:46 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Sep-23 03:21:46 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Sep-23 03:21:46 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:21:46 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:21:46 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:21:46 LOG2 antvel: Parameters to Doppler: Topocentric 26506 2008 267 0.0 2008-Sep-23 03:21:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:21:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Sep-23 03:21:46 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Sep-23 03:21:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:21:46 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:21:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-23 03:21:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:21:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:21:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:21:46 LOG5 begin_task: Level: (3) ID = <10523> Status = 0 0 0 0 ok 2008-Sep-23 03:21:46 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.080045 2008.7313897761553 18.999933 2008-Sep-23 03:21:46 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222283 10.463638888888889 2008-Sep-23 03:21:46 LOG4 log_alfabeam: ALFABEAM 1 3.032801724659681 10.569309157781614 2008-Sep-23 03:21:46 LOG4 log_alfabeam: ALFABEAM 2 3.027818150518439 10.504722347420046 2008-Sep-23 03:21:46 LOG4 log_alfabeam: ALFABEAM 3 3.028438251134971 10.398959983113377 2008-Sep-23 03:21:46 LOG4 log_alfabeam: ALFABEAM 4 3.034173598029616 10.357974532857559 2008-Sep-23 03:21:46 LOG4 log_alfabeam: ALFABEAM 5 3.039180464661268 10.423420217105781 2008-Sep-23 03:21:46 LOG4 log_alfabeam: ALFABEAM 6 3.038428735361456 10.528983939324599 2008-Sep-23 03:21:46 INFO2 take_data: Starting WAPP+GALFA scan: 826700051 2008-Sep-23 03:21:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:21:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:21:47 LOG5 begin_task: Level: (4) ID = <10524> Status = 0 0 0 0 ok 2008-Sep-23 03:21:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:21:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-23 03:21:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:21:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:21:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:21:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26508.00 2008-Sep-23 03:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.507 (still bad) 2008-Sep-23 03:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.498 (still bad) 2008-Sep-23 03:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.500 (still bad) 2008-Sep-23 03:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.499 (still bad) 2008-Sep-23 03:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.496 (still bad) 2008-Sep-23 03:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.497 (still bad) 2008-Sep-23 03:21:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:21:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:21:58 LOG5 end_task: Level: (4) ID = <10524> Status = 0 0 0 0 ok 2008-Sep-23 03:21:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:21:58 LOG5 end_task: Level: (3) ID = <10523> Status = 0 0 0 0 ok 2008-Sep-23 03:21:58 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Sep-23 03:21:58 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Sep-23 03:21:58 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Sep-23 03:21:58 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:21:58 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:21:58 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:21:58 LOG2 antvel: Parameters to Doppler: Topocentric 26518 2008 267 0.0 2008-Sep-23 03:21:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:21:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Sep-23 03:21:58 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Sep-23 03:21:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:21:58 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:21:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-23 03:21:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:21:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:21:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:21:58 LOG5 begin_task: Level: (3) ID = <10525> Status = 0 0 0 0 ok 2008-Sep-23 03:21:58 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.083387 2008.7313901564123 18.999933 2008-Sep-23 03:21:58 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222238 10.463638888888893 2008-Sep-23 03:21:58 LOG4 log_alfabeam: ALFABEAM 1 3.032845022613124 10.569366977261208 2008-Sep-23 03:21:58 LOG4 log_alfabeam: ALFABEAM 2 3.027835064394285 10.505225237688951 2008-Sep-23 03:21:58 LOG4 log_alfabeam: ALFABEAM 3 3.028411873286536 10.399409585298432 2008-Sep-23 03:21:58 LOG4 log_alfabeam: ALFABEAM 4 3.034130316775881 10.357913958757791 2008-Sep-23 03:21:58 LOG4 log_alfabeam: ALFABEAM 5 3.039163873189140 10.422912075058026 2008-Sep-23 03:21:58 LOG4 log_alfabeam: ALFABEAM 6 3.038455428066444 10.528540907065254 2008-Sep-23 03:21:58 INFO2 take_data: Starting WAPP+GALFA scan: 826700052 2008-Sep-23 03:21:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:21:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:21:59 LOG5 begin_task: Level: (4) ID = <10526> Status = 0 0 0 0 ok 2008-Sep-23 03:21:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:21:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-23 03:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:21:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26520.00 2008-Sep-23 03:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.497 (still bad) 2008-Sep-23 03:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.487 (still bad) 2008-Sep-23 03:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.488 (still bad) 2008-Sep-23 03:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.486 (still bad) 2008-Sep-23 03:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.488 (still bad) 2008-Sep-23 03:22:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:22:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:22:10 LOG5 end_task: Level: (4) ID = <10526> Status = 0 0 0 0 ok 2008-Sep-23 03:22:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:22:10 LOG5 end_task: Level: (3) ID = <10525> Status = 0 0 0 0 ok 2008-Sep-23 03:22:10 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Sep-23 03:22:10 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Sep-23 03:22:10 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Sep-23 03:22:10 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:22:10 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:22:10 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:22:10 LOG2 antvel: Parameters to Doppler: Topocentric 26530 2008 267 0.0 2008-Sep-23 03:22:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:22:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Sep-23 03:22:10 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Sep-23 03:22:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:22:10 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:22:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-23 03:22:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:22:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:22:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:22:10 LOG5 begin_task: Level: (3) ID = <10527> Status = 0 0 0 0 ok 2008-Sep-23 03:22:10 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.086730 2008.7313905366696 18.999933 2008-Sep-23 03:22:10 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222266 10.463638888888887 2008-Sep-23 03:22:10 LOG4 log_alfabeam: ALFABEAM 1 3.032888313871144 10.569420903158578 2008-Sep-23 03:22:10 LOG4 log_alfabeam: ALFABEAM 2 3.027852171311622 10.505726260992386 2008-Sep-23 03:22:10 LOG4 log_alfabeam: ALFABEAM 3 3.028385698852417 10.399861211366485 2008-Sep-23 03:22:10 LOG4 log_alfabeam: ALFABEAM 4 3.034087039931084 10.357857279914223 2008-Sep-23 03:22:10 LOG4 log_alfabeam: ALFABEAM 5 3.039147084152401 10.422405743739743 2008-Sep-23 03:22:10 LOG4 log_alfabeam: ALFABEAM 6 3.038481922480254 10.528095788513603 2008-Sep-23 03:22:10 INFO2 take_data: Starting WAPP+GALFA scan: 826700053 2008-Sep-23 03:22:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:22:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:22:11 LOG5 begin_task: Level: (4) ID = <10528> Status = 0 0 0 0 ok 2008-Sep-23 03:22:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.094 < 0.75)! 2008-Sep-23 03:22:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.442 1.319 1.301 1.272 2008-Sep-23 03:22:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.492 1.399 1.256 1.468 2008-Sep-23 03:22:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.302 1.313 1.281 1.452 2008-Sep-23 03:22:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.467 0.094 1.289 0.105 2008-Sep-23 03:22:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:22:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-23 03:22:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:22:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26532.00 2008-Sep-23 03:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.488 (still bad) 2008-Sep-23 03:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.485 (still bad) 2008-Sep-23 03:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.486 (still bad) 2008-Sep-23 03:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.485 (still bad) 2008-Sep-23 03:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.486 (still bad) 2008-Sep-23 03:22:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:22:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:22:22 LOG5 end_task: Level: (4) ID = <10528> Status = 0 0 0 0 ok 2008-Sep-23 03:22:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:22:22 LOG5 end_task: Level: (3) ID = <10527> Status = 0 0 0 0 ok 2008-Sep-23 03:22:22 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Sep-23 03:22:22 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Sep-23 03:22:22 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Sep-23 03:22:22 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:22:22 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:22:22 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:22:22 LOG2 antvel: Parameters to Doppler: Topocentric 26542 2008 267 0.0 2008-Sep-23 03:22:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:22:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Sep-23 03:22:22 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Sep-23 03:22:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:22:22 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:22:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-23 03:22:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:22:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:22:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:22:22 LOG5 begin_task: Level: (3) ID = <10529> Status = 0 0 0 0 ok 2008-Sep-23 03:22:22 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.090072 2008.7313909169266 18.999933 2008-Sep-23 03:22:22 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222208 10.463638888888887 2008-Sep-23 03:22:22 LOG4 log_alfabeam: ALFABEAM 1 3.032931567644956 10.569470908997975 2008-Sep-23 03:22:22 LOG4 log_alfabeam: ALFABEAM 2 3.027869458495960 10.506225066711163 2008-Sep-23 03:22:22 LOG4 log_alfabeam: ALFABEAM 3 3.028359745827805 10.400314533442518 2008-Sep-23 03:22:22 LOG4 log_alfabeam: ALFABEAM 4 3.034043798279081 10.357804525071156 2008-Sep-23 03:22:22 LOG4 log_alfabeam: ALFABEAM 5 3.039130110076606 10.421901578319368 2008-Sep-23 03:22:22 LOG4 log_alfabeam: ALFABEAM 6 3.038508200328274 10.527648906354516 2008-Sep-23 03:22:22 INFO2 take_data: Starting WAPP+GALFA scan: 826700054 2008-Sep-23 03:22:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:22:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:22:23 LOG5 begin_task: Level: (4) ID = <10530> Status = 0 0 0 0 ok 2008-Sep-23 03:22:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:22:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-23 03:22:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:22:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:22:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.486 (still bad) 2008-Sep-23 03:22:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26544.00 2008-Sep-23 03:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.484 (still bad) 2008-Sep-23 03:22:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999964)! 2008-Sep-23 03:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.485 (still bad) 2008-Sep-23 03:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.485 (still bad) 2008-Sep-23 03:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.482 (still bad) 2008-Sep-23 03:22:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 03:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.481 (still bad) 2008-Sep-23 03:22:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:22:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:22:34 LOG5 end_task: Level: (4) ID = <10530> Status = 0 0 0 0 ok 2008-Sep-23 03:22:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:22:34 LOG5 end_task: Level: (3) ID = <10529> Status = 0 0 0 0 ok 2008-Sep-23 03:22:34 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Sep-23 03:22:34 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Sep-23 03:22:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Sep-23 03:22:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 03:22:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 03:22:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 03:22:34 LOG5 begin_task: Level: (3) ID = <10531> Status = 0 0 0 0 ok 2008-Sep-23 03:22:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 03:22:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 03:22:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 03:22:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 03:22:34 LOG5 end_task: Level: (3) ID = <10531> Status = 0 0 0 0 ok 2008-Sep-23 03:22:34 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Sep-23 03:22:34 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Sep-23 03:22:34 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Sep-23 03:22:34 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Sep-23 03:22:34 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:22:34 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:22:34 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:22:34 LOG2 antvel: Parameters to Doppler: Topocentric 26554 2008 267 0.0 2008-Sep-23 03:22:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:22:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Sep-23 03:22:34 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Sep-23 03:22:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:22:34 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:22:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-23 03:22:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:22:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:22:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:22:34 LOG5 begin_task: Level: (3) ID = <10532> Status = 0 0 0 0 ok 2008-Sep-23 03:22:34 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.093415 2008.7313912971836 18.999933 2008-Sep-23 03:22:34 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222239 10.463638888888896 2008-Sep-23 03:22:34 LOG4 log_alfabeam: ALFABEAM 1 3.032974804951714 10.569517031808950 2008-Sep-23 03:22:34 LOG4 log_alfabeam: ALFABEAM 2 3.027886933696424 10.506721903321127 2008-Sep-23 03:22:34 LOG4 log_alfabeam: ALFABEAM 3 3.028334000937997 10.400769764662941 2008-Sep-23 03:22:34 LOG4 log_alfabeam: ALFABEAM 4 3.034000570814444 10.357755656171717 2008-Sep-23 03:22:34 LOG4 log_alfabeam: ALFABEAM 5 3.039112943343199 10.421399328506054 2008-Sep-23 03:22:34 LOG4 log_alfabeam: ALFABEAM 6 3.038534274989855 10.527200050042968 2008-Sep-23 03:22:34 INFO2 take_data: Starting WAPP+GALFA scan: 826700055 2008-Sep-23 03:22:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:22:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:22:35 LOG5 begin_task: Level: (4) ID = <10533> Status = 0 0 0 0 ok 2008-Sep-23 03:22:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:22:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-23 03:22:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:22:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26556.00 2008-Sep-23 03:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.484 (still bad) 2008-Sep-23 03:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.128 (still bad) 2008-Sep-23 03:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 03:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 03:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 03:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 03:22:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:22:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:22:46 LOG5 end_task: Level: (4) ID = <10533> Status = 0 0 0 0 ok 2008-Sep-23 03:22:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:22:46 LOG5 end_task: Level: (3) ID = <10532> Status = 0 0 0 0 ok 2008-Sep-23 03:22:46 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Sep-23 03:22:46 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Sep-23 03:22:46 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Sep-23 03:22:46 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:22:46 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:22:46 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:22:46 LOG2 antvel: Parameters to Doppler: Topocentric 26566 2008 267 0.0 2008-Sep-23 03:22:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:22:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Sep-23 03:22:46 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Sep-23 03:22:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:22:46 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:22:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-23 03:22:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:22:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:22:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:22:46 LOG5 begin_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2008-Sep-23 03:22:46 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.096757 2008.7313916774406 18.999933 2008-Sep-23 03:22:46 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222244 10.463638888888893 2008-Sep-23 03:22:46 LOG4 log_alfabeam: ALFABEAM 1 3.033017995084500 10.569559252402664 2008-Sep-23 03:22:46 LOG4 log_alfabeam: ALFABEAM 2 3.027904583809462 10.507216424457626 2008-Sep-23 03:22:46 LOG4 log_alfabeam: ALFABEAM 3 3.028308481759761 10.401226574140937 2008-Sep-23 03:22:46 LOG4 log_alfabeam: ALFABEAM 4 3.033957388244184 10.357710694660833 2008-Sep-23 03:22:46 LOG4 log_alfabeam: ALFABEAM 5 3.039095596817015 10.420899345312518 2008-Sep-23 03:22:46 LOG4 log_alfabeam: ALFABEAM 6 3.038560128599503 10.526749545425938 2008-Sep-23 03:22:46 INFO2 take_data: Starting WAPP+GALFA scan: 826700056 2008-Sep-23 03:22:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:22:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:22:47 LOG5 begin_task: Level: (4) ID = <10535> Status = 0 0 0 0 ok 2008-Sep-23 03:22:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:22:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-23 03:22:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:22:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:22:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:22:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26568.00 2008-Sep-23 03:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.127 (still bad) 2008-Sep-23 03:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.113 (still bad) 2008-Sep-23 03:22:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999964)! 2008-Sep-23 03:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.112 (still bad) 2008-Sep-23 03:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.112 (still bad) 2008-Sep-23 03:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.112 (still bad) 2008-Sep-23 03:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.113 (still bad) 2008-Sep-23 03:22:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:22:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:22:58 LOG5 end_task: Level: (4) ID = <10535> Status = 0 0 0 0 ok 2008-Sep-23 03:22:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:22:58 LOG5 end_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2008-Sep-23 03:22:58 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Sep-23 03:22:58 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Sep-23 03:22:58 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Sep-23 03:22:58 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:22:58 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:22:58 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:22:58 LOG2 antvel: Parameters to Doppler: Topocentric 26578 2008 267 0.0 2008-Sep-23 03:22:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:22:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Sep-23 03:22:58 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Sep-23 03:22:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:22:58 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:22:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-23 03:22:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:22:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:22:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:22:58 LOG5 begin_task: Level: (3) ID = <10536> Status = 0 0 0 0 ok 2008-Sep-23 03:22:58 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.100100 2008.7313920576976 18.999933 2008-Sep-23 03:22:58 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222230 10.463638888888887 2008-Sep-23 03:22:58 LOG4 log_alfabeam: ALFABEAM 1 3.033061159077060 10.569597605745967 2008-Sep-23 03:22:58 LOG4 log_alfabeam: ALFABEAM 2 3.027922416696229 10.507708877829602 2008-Sep-23 03:22:58 LOG4 log_alfabeam: ALFABEAM 3 3.028283175114970 10.401685176316219 2008-Sep-23 03:22:58 LOG4 log_alfabeam: ALFABEAM 4 3.033914229545513 10.357669604540037 2008-Sep-23 03:22:58 LOG4 log_alfabeam: ALFABEAM 5 3.039078062766686 10.420401379187281 2008-Sep-23 03:22:58 LOG4 log_alfabeam: ALFABEAM 6 3.038585774442112 10.526297180646827 2008-Sep-23 03:22:58 INFO2 take_data: Starting WAPP+GALFA scan: 826700057 2008-Sep-23 03:22:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:22:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:22:59 LOG5 begin_task: Level: (4) ID = <10537> Status = 0 0 0 0 ok 2008-Sep-23 03:22:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:22:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-23 03:22:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:22:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:22:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:22:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26580.00 2008-Sep-23 03:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.112 (still bad) 2008-Sep-23 03:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.110 (still bad) 2008-Sep-23 03:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.110 (still bad) 2008-Sep-23 03:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.110 (still bad) 2008-Sep-23 03:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.109 (still bad) 2008-Sep-23 03:23:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:23:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:23:10 LOG5 end_task: Level: (4) ID = <10537> Status = 0 0 0 0 ok 2008-Sep-23 03:23:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:23:10 LOG5 end_task: Level: (3) ID = <10536> Status = 0 0 0 0 ok 2008-Sep-23 03:23:10 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Sep-23 03:23:10 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Sep-23 03:23:10 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Sep-23 03:23:10 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:23:10 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:23:10 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:23:10 LOG2 antvel: Parameters to Doppler: Topocentric 26590 2008 267 0.0 2008-Sep-23 03:23:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:23:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Sep-23 03:23:10 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Sep-23 03:23:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:23:10 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:23:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-23 03:23:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:23:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:23:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:23:10 LOG5 begin_task: Level: (3) ID = <10538> Status = 0 0 0 0 ok 2008-Sep-23 03:23:10 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.103442 2008.7313924379548 18.999933 2008-Sep-23 03:23:10 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222260 10.463638888888893 2008-Sep-23 03:23:10 LOG4 log_alfabeam: ALFABEAM 1 3.033104266325992 10.569632079867722 2008-Sep-23 03:23:10 LOG4 log_alfabeam: ALFABEAM 2 3.027940418937500 10.508198921535817 2008-Sep-23 03:23:10 LOG4 log_alfabeam: ALFABEAM 3 3.028258098153802 10.402145237573402 2008-Sep-23 03:23:10 LOG4 log_alfabeam: ALFABEAM 4 3.033871125326303 10.357632400020680 2008-Sep-23 03:23:10 LOG4 log_alfabeam: ALFABEAM 5 3.039060354383072 10.419905776770250 2008-Sep-23 03:23:10 LOG4 log_alfabeam: ALFABEAM 6 3.038611195069643 10.525843284437070 2008-Sep-23 03:23:10 INFO2 take_data: Starting WAPP+GALFA scan: 826700058 2008-Sep-23 03:23:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:23:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:23:11 LOG5 begin_task: Level: (4) ID = <10539> Status = 0 0 0 0 ok 2008-Sep-23 03:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.109 (still bad) 2008-Sep-23 03:23:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:23:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-23 03:23:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:23:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26592.00 2008-Sep-23 03:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:23:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 03:23:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 0.990 0.983 0.947 2008-Sep-23 03:23:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.097 1.028 0.934 1.086 2008-Sep-23 03:23:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 0.948 0.957 1.110 2008-Sep-23 03:23:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.095 0.927 0.105 2008-Sep-23 03:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.101 (still bad) 2008-Sep-23 03:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.102 (still bad) 2008-Sep-23 03:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.101 (still bad) 2008-Sep-23 03:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.101 (still bad) 2008-Sep-23 03:23:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:23:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:23:22 LOG5 end_task: Level: (4) ID = <10539> Status = 0 0 0 0 ok 2008-Sep-23 03:23:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:23:22 LOG5 end_task: Level: (3) ID = <10538> Status = 0 0 0 0 ok 2008-Sep-23 03:23:22 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Sep-23 03:23:22 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Sep-23 03:23:22 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Sep-23 03:23:22 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:23:22 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:23:22 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:23:22 LOG2 antvel: Parameters to Doppler: Topocentric 26602 2008 267 0.0 2008-Sep-23 03:23:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:23:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Sep-23 03:23:22 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Sep-23 03:23:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:23:22 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:23:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-23 03:23:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:23:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:23:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:23:22 LOG5 begin_task: Level: (3) ID = <10540> Status = 0 0 0 0 ok 2008-Sep-23 03:23:22 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.106785 2008.7313928182118 18.999933 2008-Sep-23 03:23:22 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222262 10.463638888888893 2008-Sep-23 03:23:22 LOG4 log_alfabeam: ALFABEAM 1 3.033147337880479 10.569662707641632 2008-Sep-23 03:23:22 LOG4 log_alfabeam: ALFABEAM 2 3.027958598507450 10.508686802490320 2008-Sep-23 03:23:22 LOG4 log_alfabeam: ALFABEAM 3 3.028233237796865 10.402606973658266 2008-Sep-23 03:23:22 LOG4 log_alfabeam: ALFABEAM 4 3.033828054547749 10.357599047192689 2008-Sep-23 03:23:22 LOG4 log_alfabeam: ALFABEAM 5 3.039042463820947 10.419412289275948 2008-Sep-23 03:23:22 LOG4 log_alfabeam: ALFABEAM 6 3.038636403670625 10.525387643625555 2008-Sep-23 03:23:22 INFO2 take_data: Starting WAPP+GALFA scan: 826700059 2008-Sep-23 03:23:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:23:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:23:23 LOG5 begin_task: Level: (4) ID = <10541> Status = 0 0 0 0 ok 2008-Sep-23 03:23:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:23:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-23 03:23:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:23:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:23:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.102 (still bad) 2008-Sep-23 03:23:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26604.00 2008-Sep-23 03:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.102 (still bad) 2008-Sep-23 03:23:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999964)! 2008-Sep-23 03:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.088 (still bad) 2008-Sep-23 03:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.089 (still bad) 2008-Sep-23 03:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.088 (still bad) 2008-Sep-23 03:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.086 (still bad) 2008-Sep-23 03:23:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:23:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:23:34 LOG5 end_task: Level: (4) ID = <10541> Status = 0 0 0 0 ok 2008-Sep-23 03:23:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:23:34 LOG5 end_task: Level: (3) ID = <10540> Status = 0 0 0 0 ok 2008-Sep-23 03:23:34 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Sep-23 03:23:34 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Sep-23 03:23:34 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Sep-23 03:23:34 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:23:34 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:23:34 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:23:34 LOG2 antvel: Parameters to Doppler: Topocentric 26614 2008 267 0.0 2008-Sep-23 03:23:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:23:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Sep-23 03:23:34 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Sep-23 03:23:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:23:34 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:23:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-23 03:23:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:23:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:23:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:23:34 LOG5 begin_task: Level: (3) ID = <10542> Status = 0 0 0 0 ok 2008-Sep-23 03:23:34 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.110127 2008.7313931984688 18.999933 2008-Sep-23 03:23:34 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222263 10.463638888888889 2008-Sep-23 03:23:34 LOG4 log_alfabeam: ALFABEAM 1 3.033190343262403 10.569689484230283 2008-Sep-23 03:23:34 LOG4 log_alfabeam: ALFABEAM 2 3.027976941685576 10.509172183451987 2008-Sep-23 03:23:34 LOG4 log_alfabeam: ALFABEAM 3 3.028208610760580 10.403070048512941 2008-Sep-23 03:23:34 LOG4 log_alfabeam: ALFABEAM 4 3.033785047697209 10.357569553115157 2008-Sep-23 03:23:34 LOG4 log_alfabeam: ALFABEAM 5 3.039024404583448 10.418921258766934 2008-Sep-23 03:23:34 LOG4 log_alfabeam: ALFABEAM 6 3.038661383222379 10.524930589547658 2008-Sep-23 03:23:34 INFO2 take_data: Starting WAPP+GALFA scan: 826700060 2008-Sep-23 03:23:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:23:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:23:35 LOG5 begin_task: Level: (4) ID = <10543> Status = 0 0 0 0 ok 2008-Sep-23 03:23:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:23:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-23 03:23:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:23:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:23:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:23:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26616.00 2008-Sep-23 03:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.088 (still bad) 2008-Sep-23 03:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.087 (still bad) 2008-Sep-23 03:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.087 (still bad) 2008-Sep-23 03:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.086 (still bad) 2008-Sep-23 03:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.086 (still bad) 2008-Sep-23 03:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.085 (still bad) 2008-Sep-23 03:23:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:23:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:23:46 LOG5 end_task: Level: (4) ID = <10543> Status = 0 0 0 0 ok 2008-Sep-23 03:23:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:23:46 LOG5 end_task: Level: (3) ID = <10542> Status = 0 0 0 0 ok 2008-Sep-23 03:23:46 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Sep-23 03:23:46 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Sep-23 03:23:46 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Sep-23 03:23:46 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:23:46 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:23:46 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:23:46 LOG2 antvel: Parameters to Doppler: Topocentric 26626 2008 267 0.0 2008-Sep-23 03:23:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:23:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Sep-23 03:23:46 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Sep-23 03:23:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:23:46 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:23:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-23 03:23:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:23:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Sep-23 03:23:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:23:46 LOG5 begin_task: Level: (3) ID = <10544> Status = 0 0 0 0 ok 2008-Sep-23 03:23:46 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.113469 2008.7313935787258 18.999933 2008-Sep-23 03:23:46 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222254 10.463638888888893 2008-Sep-23 03:23:46 LOG4 log_alfabeam: ALFABEAM 1 3.033233290693219 10.569712434085229 2008-Sep-23 03:23:46 LOG4 log_alfabeam: ALFABEAM 2 3.027995450996958 10.509655166352488 2008-Sep-23 03:23:46 LOG4 log_alfabeam: ALFABEAM 3 3.028184211333415 10.403534539998864 2008-Sep-23 03:23:46 LOG4 log_alfabeam: ALFABEAM 4 3.033742096564238 10.357543893104907 2008-Sep-23 03:23:46 LOG4 log_alfabeam: ALFABEAM 5 3.039006174190745 10.418432583119564 2008-Sep-23 03:23:46 LOG4 log_alfabeam: ALFABEAM 6 3.038686139440596 10.524472045139351 2008-Sep-23 03:23:46 INFO2 take_data: Starting WAPP+GALFA scan: 826700061 2008-Sep-23 03:23:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:23:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:23:47 LOG5 begin_task: Level: (4) ID = <10545> Status = 0 0 0 0 ok 2008-Sep-23 03:23:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:23:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-23 03:23:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:23:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:23:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:23:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26628.00 2008-Sep-23 03:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.085 (still bad) 2008-Sep-23 03:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.083 (still bad) 2008-Sep-23 03:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.083 (still bad) 2008-Sep-23 03:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.082 (still bad) 2008-Sep-23 03:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.083 (still bad) 2008-Sep-23 03:23:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:23:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:23:58 LOG5 end_task: Level: (4) ID = <10545> Status = 0 0 0 0 ok 2008-Sep-23 03:23:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:23:58 LOG5 end_task: Level: (3) ID = <10544> Status = 0 0 0 0 ok 2008-Sep-23 03:23:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Sep-23 03:23:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Sep-23 03:23:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Sep-23 03:23:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 03:23:58 LOG5 begin_task: Level: (3) ID = <10546> Status = 0 0 0 0 ok 2008-Sep-23 03:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.081 (still bad) 2008-Sep-23 03:23:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 03:23:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Sep-23 03:23:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 03:23:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 03:23:58 LOG5 end_task: Level: (3) ID = <10546> Status = 0 0 0 0 ok 2008-Sep-23 03:23:58 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Sep-23 03:23:58 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Sep-23 03:23:58 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Sep-23 03:23:58 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:23:58 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:23:58 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:23:58 LOG2 antvel: Parameters to Doppler: Topocentric 26638 2008 267 0.0 2008-Sep-23 03:23:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:23:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Sep-23 03:23:58 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Sep-23 03:23:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:23:58 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:23:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-23 03:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:23:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:23:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:23:58 LOG5 begin_task: Level: (3) ID = <10547> Status = 0 0 0 0 ok 2008-Sep-23 03:23:58 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.116812 2008.7313939589828 18.999933 2008-Sep-23 03:23:58 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222249 10.463638888888896 2008-Sep-23 03:23:58 LOG4 log_alfabeam: ALFABEAM 1 3.033276188366047 10.569731578291748 2008-Sep-23 03:23:58 LOG4 log_alfabeam: ALFABEAM 2 3.028014129123312 10.510135851262060 2008-Sep-23 03:23:58 LOG4 log_alfabeam: ALFABEAM 3 3.028160033991832 10.404000527479239 2008-Sep-23 03:23:58 LOG4 log_alfabeam: ALFABEAM 4 3.033699192965168 10.357522045847050 2008-Sep-23 03:23:58 LOG4 log_alfabeam: ALFABEAM 5 3.038987770002844 10.417946162030105 2008-Sep-23 03:23:58 LOG4 log_alfabeam: ALFABEAM 6 3.038710677856875 10.524011931785916 2008-Sep-23 03:23:58 INFO2 take_data: Starting WAPP+GALFA scan: 826700062 2008-Sep-23 03:23:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:23:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:23:59 LOG5 begin_task: Level: (4) ID = <10548> Status = 0 0 0 0 ok 2008-Sep-23 03:23:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:23:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Sep-23 03:23:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:23:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:23:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:23:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26640.00 2008-Sep-23 03:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.507 (still bad) 2008-Sep-23 03:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.507 (still bad) 2008-Sep-23 03:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.510 (still bad) 2008-Sep-23 03:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.508 (still bad) 2008-Sep-23 03:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.509 (still bad) 2008-Sep-23 03:24:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:24:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:24:10 LOG5 end_task: Level: (4) ID = <10548> Status = 0 0 0 0 ok 2008-Sep-23 03:24:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:24:10 LOG5 end_task: Level: (3) ID = <10547> Status = 0 0 0 0 ok 2008-Sep-23 03:24:10 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Sep-23 03:24:10 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Sep-23 03:24:10 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Sep-23 03:24:10 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:24:10 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:24:10 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:24:10 LOG2 antvel: Parameters to Doppler: Topocentric 26650 2008 267 0.0 2008-Sep-23 03:24:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:24:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Sep-23 03:24:10 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Sep-23 03:24:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:24:10 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:24:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-23 03:24:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:24:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:24:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:24:10 LOG5 begin_task: Level: (3) ID = <10549> Status = 0 0 0 0 ok 2008-Sep-23 03:24:10 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.120154 2008.7313943392401 18.999933 2008-Sep-23 03:24:10 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222229 10.463638888888886 2008-Sep-23 03:24:10 LOG4 log_alfabeam: ALFABEAM 1 3.033319006029665 10.569746922522803 2008-Sep-23 03:24:10 LOG4 log_alfabeam: ALFABEAM 2 3.028032961919746 10.510613908269576 2008-Sep-23 03:24:10 LOG4 log_alfabeam: ALFABEAM 3 3.028136094790163 10.404467671771668 2008-Sep-23 03:24:10 LOG4 log_alfabeam: ALFABEAM 4 3.033656367167048 10.357504007856470 2008-Sep-23 03:24:10 LOG4 log_alfabeam: ALFABEAM 5 3.038969205963741 10.417462330339609 2008-Sep-23 03:24:10 LOG4 log_alfabeam: ALFABEAM 6 3.038734982098936 10.523550584198077 2008-Sep-23 03:24:10 INFO2 take_data: Starting WAPP+GALFA scan: 826700063 2008-Sep-23 03:24:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:24:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:24:11 LOG5 begin_task: Level: (4) ID = <10550> Status = 0 0 0 0 ok 2008-Sep-23 03:24:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:24:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Sep-23 03:24:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:24:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:24:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:24:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26652.00 2008-Sep-23 03:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.507 (still bad) 2008-Sep-23 03:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:24:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 03:24:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.480 1.341 1.335 1.281 2008-Sep-23 03:24:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.505 1.413 1.298 1.492 2008-Sep-23 03:24:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.343 1.325 1.339 1.484 2008-Sep-23 03:24:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.485 0.095 1.305 0.105 2008-Sep-23 03:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.508 (still bad) 2008-Sep-23 03:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.506 (still bad) 2008-Sep-23 03:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.505 (still bad) 2008-Sep-23 03:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.505 (still bad) 2008-Sep-23 03:24:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:24:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:24:22 LOG5 end_task: Level: (4) ID = <10550> Status = 0 0 0 0 ok 2008-Sep-23 03:24:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:24:22 LOG5 end_task: Level: (3) ID = <10549> Status = 0 0 0 0 ok 2008-Sep-23 03:24:22 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Sep-23 03:24:22 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Sep-23 03:24:22 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Sep-23 03:24:22 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:24:22 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73139 J 2008-Sep-23 03:24:22 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:24:22 LOG2 antvel: Parameters to Doppler: Topocentric 26662 2008 267 0.0 2008-Sep-23 03:24:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:24:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Sep-23 03:24:22 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Sep-23 03:24:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:24:22 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:24:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-23 03:24:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:24:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:24:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:24:22 LOG5 begin_task: Level: (3) ID = <10551> Status = 0 0 0 0 ok 2008-Sep-23 03:24:22 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.123497 2008.7313947194971 18.999933 2008-Sep-23 03:24:22 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222218 10.463638888888886 2008-Sep-23 03:24:22 LOG4 log_alfabeam: ALFABEAM 1 3.033361764764826 10.569758494270102 2008-Sep-23 03:24:22 LOG4 log_alfabeam: ALFABEAM 2 3.028051957646983 10.511089582155696 2008-Sep-23 03:24:22 LOG4 log_alfabeam: ALFABEAM 3 3.028112380907520 10.404936191891132 2008-Sep-23 03:24:22 LOG4 log_alfabeam: ALFABEAM 4 3.033613598097589 10.357489750592441 2008-Sep-23 03:24:22 LOG4 log_alfabeam: ALFABEAM 5 3.038950473939140 10.416980841318082 2008-Sep-23 03:24:22 LOG4 log_alfabeam: ALFABEAM 6 3.038759065103053 10.523087785912059 2008-Sep-23 03:24:22 INFO2 take_data: Starting WAPP+GALFA scan: 826700064 2008-Sep-23 03:24:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:24:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:24:23 LOG5 begin_task: Level: (4) ID = <10552> Status = 0 0 0 0 ok 2008-Sep-23 03:24:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:24:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Sep-23 03:24:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:24:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:24:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:24:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26664.00 2008-Sep-23 03:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.504 (still bad) 2008-Sep-23 03:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.502 (still bad) 2008-Sep-23 03:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.505 (still bad) 2008-Sep-23 03:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.507 (still bad) 2008-Sep-23 03:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.506 (still bad) 2008-Sep-23 03:24:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:24:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:24:34 LOG5 end_task: Level: (4) ID = <10552> Status = 0 0 0 0 ok 2008-Sep-23 03:24:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:24:34 LOG5 end_task: Level: (3) ID = <10551> Status = 0 0 0 0 ok 2008-Sep-23 03:24:34 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Sep-23 03:24:34 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Sep-23 03:24:34 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Sep-23 03:24:34 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:24:34 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73140 J 2008-Sep-23 03:24:34 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:24:34 LOG2 antvel: Parameters to Doppler: Topocentric 26674 2008 267 0.0 2008-Sep-23 03:24:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:24:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Sep-23 03:24:34 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Sep-23 03:24:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:24:34 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:24:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-23 03:24:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:24:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:24:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:24:34 LOG5 begin_task: Level: (3) ID = <10553> Status = 0 0 0 0 ok 2008-Sep-23 03:24:34 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.126839 2008.7313950997541 18.999933 2008-Sep-23 03:24:34 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222249 10.463638888888889 2008-Sep-23 03:24:34 LOG4 log_alfabeam: ALFABEAM 1 3.033404434496815 10.569766306067626 2008-Sep-23 03:24:34 LOG4 log_alfabeam: ALFABEAM 2 3.028071101896102 10.511562548103541 2008-Sep-23 03:24:34 LOG4 log_alfabeam: ALFABEAM 3 3.028088907950779 10.405405746931377 2008-Sep-23 03:24:34 LOG4 log_alfabeam: ALFABEAM 4 3.033570915851910 10.357479263682675 2008-Sep-23 03:24:34 LOG4 log_alfabeam: ALFABEAM 5 3.038931588148359 10.416502024774086 2008-Sep-23 03:24:34 LOG4 log_alfabeam: ALFABEAM 6 3.038782910937505 10.522623873534354 2008-Sep-23 03:24:34 INFO2 take_data: Starting WAPP+GALFA scan: 826700065 2008-Sep-23 03:24:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:24:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:24:35 LOG5 begin_task: Level: (4) ID = <10554> Status = 0 0 0 0 ok 2008-Sep-23 03:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.504 (still bad) 2008-Sep-23 03:24:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:24:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Sep-23 03:24:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:24:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:24:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:24:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26676.00 2008-Sep-23 03:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.505 (still bad) 2008-Sep-23 03:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.502 (still bad) 2008-Sep-23 03:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.498 (still bad) 2008-Sep-23 03:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.499 (still bad) 2008-Sep-23 03:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.497 (still bad) 2008-Sep-23 03:24:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:24:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:24:46 LOG5 end_task: Level: (4) ID = <10554> Status = 0 0 0 0 ok 2008-Sep-23 03:24:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:24:46 LOG5 end_task: Level: (3) ID = <10553> Status = 0 0 0 0 ok 2008-Sep-23 03:24:46 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Sep-23 03:24:46 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Sep-23 03:24:46 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Sep-23 03:24:46 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:24:46 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73140 J 2008-Sep-23 03:24:46 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:24:46 LOG2 antvel: Parameters to Doppler: Topocentric 26686 2008 267 0.0 2008-Sep-23 03:24:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:24:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Sep-23 03:24:46 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Sep-23 03:24:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:24:46 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:24:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-23 03:24:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:24:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:24:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:24:46 LOG5 begin_task: Level: (3) ID = <10555> Status = 0 0 0 0 ok 2008-Sep-23 03:24:46 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.130182 2008.7313954800111 18.999933 2008-Sep-23 03:24:46 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222227 10.463638888888889 2008-Sep-23 03:24:46 LOG4 log_alfabeam: ALFABEAM 1 3.033447036315595 10.569770383189269 2008-Sep-23 03:24:46 LOG4 log_alfabeam: ALFABEAM 2 3.028090403044205 10.512033049972167 2008-Sep-23 03:24:46 LOG4 log_alfabeam: ALFABEAM 3 3.028065663207841 10.405876557212361 2008-Sep-23 03:24:46 LOG4 log_alfabeam: ALFABEAM 4 3.033528299347684 10.357472520799190 2008-Sep-23 03:24:46 LOG4 log_alfabeam: ALFABEAM 5 3.038912540339615 10.416025634866118 2008-Sep-23 03:24:46 LOG4 log_alfabeam: ALFABEAM 6 3.038806532432547 10.522158629285727 2008-Sep-23 03:24:46 INFO2 take_data: Starting WAPP+GALFA scan: 826700066 2008-Sep-23 03:24:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:24:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:24:47 LOG5 begin_task: Level: (4) ID = <10556> Status = 0 0 0 0 ok 2008-Sep-23 03:24:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:24:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Sep-23 03:24:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:24:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:24:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.499 (still bad) 2008-Sep-23 03:24:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26688.00 2008-Sep-23 03:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.499 (still bad) 2008-Sep-23 03:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.488 (still bad) 2008-Sep-23 03:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.487 (still bad) 2008-Sep-23 03:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.487 (still bad) 2008-Sep-23 03:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.488 (still bad) 2008-Sep-23 03:24:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:24:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:24:58 LOG5 end_task: Level: (4) ID = <10556> Status = 0 0 0 0 ok 2008-Sep-23 03:24:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:24:58 LOG5 end_task: Level: (3) ID = <10555> Status = 0 0 0 0 ok 2008-Sep-23 03:24:58 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Sep-23 03:24:58 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Sep-23 03:24:58 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Sep-23 03:24:58 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:24:58 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73140 J 2008-Sep-23 03:24:58 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:24:58 LOG2 antvel: Parameters to Doppler: Topocentric 26698 2008 267 0.0 2008-Sep-23 03:24:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:24:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Sep-23 03:24:58 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Sep-23 03:24:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:24:58 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:24:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-23 03:24:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:24:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:24:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:24:58 LOG5 begin_task: Level: (3) ID = <10557> Status = 0 0 0 0 ok 2008-Sep-23 03:24:58 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.133524 2008.7313958602681 18.999933 2008-Sep-23 03:24:58 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222234 10.463638888888884 2008-Sep-23 03:24:58 LOG4 log_alfabeam: ALFABEAM 1 3.033489540342119 10.569770744898113 2008-Sep-23 03:24:58 LOG4 log_alfabeam: ALFABEAM 2 3.028109846433688 10.512500768188893 2008-Sep-23 03:24:58 LOG4 log_alfabeam: ALFABEAM 3 3.028042661834522 10.406348280390180 2008-Sep-23 03:24:58 LOG4 log_alfabeam: ALFABEAM 4 3.033485778488530 10.357469504811705 2008-Sep-23 03:24:58 LOG4 log_alfabeam: ALFABEAM 5 3.038893344992079 10.415551996211976 2008-Sep-23 03:24:58 LOG4 log_alfabeam: ALFABEAM 6 3.038829914100913 10.521692391385477 2008-Sep-23 03:24:58 INFO2 take_data: Starting WAPP+GALFA scan: 826700067 2008-Sep-23 03:24:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:24:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:24:59 LOG5 begin_task: Level: (4) ID = <10558> Status = 0 0 0 0 ok 2008-Sep-23 03:24:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:24:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Sep-23 03:24:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:24:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:24:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:24:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26700.00 2008-Sep-23 03:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.492 (still bad) 2008-Sep-23 03:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.487 (still bad) 2008-Sep-23 03:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.484 (still bad) 2008-Sep-23 03:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.485 (still bad) 2008-Sep-23 03:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.486 (still bad) 2008-Sep-23 03:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.487 (still bad) 2008-Sep-23 03:25:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:25:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:25:10 LOG5 end_task: Level: (4) ID = <10558> Status = 0 0 0 0 ok 2008-Sep-23 03:25:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:25:10 LOG5 end_task: Level: (3) ID = <10557> Status = 0 0 0 0 ok 2008-Sep-23 03:25:10 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Sep-23 03:25:10 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Sep-23 03:25:10 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Sep-23 03:25:10 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:25:10 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73140 J 2008-Sep-23 03:25:10 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:25:10 LOG2 antvel: Parameters to Doppler: Topocentric 26710 2008 267 0.0 2008-Sep-23 03:25:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:25:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Sep-23 03:25:10 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Sep-23 03:25:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:25:10 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:25:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-23 03:25:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:25:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Sep-23 03:25:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Sep-23 03:25:10 LOG5 begin_task: Level: (3) ID = <10559> Status = 0 0 0 0 ok 2008-Sep-23 03:25:10 LOG5 log_alfabeam: Parameters: 3.0334722222222221 10.463638888888889 3.136867 2008.7313962405253 18.999933 2008-Sep-23 03:25:10 LOG4 log_alfabeam: ALFABEAM 0 3.033472222222247 10.463638888888886 2008-Sep-23 03:25:10 LOG4 log_alfabeam: ALFABEAM 1 3.033531967673166 10.569767414210768 2008-Sep-23 03:25:10 LOG4 log_alfabeam: ALFABEAM 2 3.028129440558980 10.512965945646622 2008-Sep-23 03:25:10 LOG4 log_alfabeam: ALFABEAM 3 3.028019891230717 10.406821138084606 2008-Sep-23 03:25:10 LOG4 log_alfabeam: ALFABEAM 4 3.033443332184424 10.357470191644444 2008-Sep-23 03:25:10 LOG4 log_alfabeam: ALFABEAM 5 3.038873993735540 10.415080863902089 2008-Sep-23 03:25:10 LOG4 log_alfabeam: ALFABEAM 6 3.038853068663731 10.521224940742934 2008-Sep-23 03:25:10 INFO2 take_data: Starting WAPP+GALFA scan: 826700068 2008-Sep-23 03:25:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Sep-23 03:25:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Sep-23 03:25:11 LOG5 begin_task: Level: (4) ID = <10560> Status = 0 0 0 0 ok 2008-Sep-23 03:25:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Sep-23 03:25:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Sep-23 03:25:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:25:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:25:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:25:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26712.00 2008-Sep-23 03:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.488 (still bad) 2008-Sep-23 03:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Sep-23 03:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Sep-23 03:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Sep-23 03:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Sep-23 03:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Sep-23 03:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Sep-23 03:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Sep-23 03:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Sep-23 03:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.484 (still bad) 2008-Sep-23 03:25:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Sep-23 03:25:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.433 1.305 1.290 1.258 2008-Sep-23 03:25:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.485 1.385 1.241 1.460 2008-Sep-23 03:25:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.297 1.307 1.256 1.437 2008-Sep-23 03:25:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.463 0.095 1.285 0.105 2008-Sep-23 03:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.095 and 1.484 (still bad) 2008-Sep-23 03:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.486 (still bad) 2008-Sep-23 03:25:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Sep-23 03:25:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Sep-23 03:25:22 LOG5 end_task: Level: (4) ID = <10560> Status = 0 0 0 0 ok 2008-Sep-23 03:25:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Sep-23 03:25:22 LOG5 end_task: Level: (3) ID = <10559> Status = 0 0 0 0 ok 2008-Sep-23 03:25:22 INFO2 smartfreq: Switching off CAL 2008-Sep-23 03:25:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Sep-23 03:25:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Sep-23 03:25:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Sep-23 03:25:22 LOG5 begin_task: Level: (3) ID = <10561> Status = 0 0 0 0 ok 2008-Sep-23 03:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.094 and 1.486 (still bad) 2008-Sep-23 03:25:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Sep-23 03:25:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Sep-23 03:25:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Sep-23 03:25:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Sep-23 03:25:22 LOG5 end_task: Level: (3) ID = <10561> Status = 0 0 0 0 ok 2008-Sep-23 03:25:22 INFO3 restore_frequencies: Restoring original frequencies 2008-Sep-23 03:25:22 LOG5 antvel: Calling 'antvel 30200.500000 102749.100000 J 0' 2008-Sep-23 03:25:22 LOG2 antvel: Precessing RA = 03:02:00.5 Dec = +10:27:49.1 Epoch = 2008.73140 J 2008-Sep-23 03:25:22 LOG2 antvel: Computed apparent RA = 03:02:30.5 Dec = +10:30:05.7 2008-Sep-23 03:25:22 LOG2 antvel: Parameters to Doppler: Topocentric 26722 2008 267 0.0 2008-Sep-23 03:25:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Sep-23 03:25:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Sep-23 03:25:22 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Sep-23 03:25:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Sep-23 03:25:22 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Sep-23 03:25:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-23 03:25:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:25:22 STOP finish_task: Finishing task 'smart frequency switching' 2008-Sep-23 03:25:22 LOG5 finish_task: Level: (2) ID = <10492> Status = 0 0 0 0 ok 2008-Sep-23 03:25:22 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Sep-23 03:25:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-23 03:25:22 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Sep-23 03:25:22 LOG5 end_task: Level: (2) ID = <10492> Status = 0 0 0 0 ok 2008-Sep-23 03:25:22 NOTE run_command_file: DONE with command file processing 2008-Sep-23 03:25:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Sep-23 03:25:23 STOP finish_task: Finishing task 'running command file 'command_galfacurpos'' 2008-Sep-23 03:25:23 LOG5 finish_task: Level: (1) ID = <10476> Status = 0 0 0 0 ok 2008-Sep-23 03:25:23 DONE finish_task: DONE finished running: command file 'command_galfacurpos' 2008-Sep-23 03:25:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Sep-23 03:25:23 END end_task: Finishing task 'running command file 'command_galfacurpos'' with status 'OK' 2008-Sep-23 03:25:23 LOG5 end_task: Level: (1) ID = <10476> Status = 0 0 0 0 ok 2008-Sep-23 03:25:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Sep-23 03:25:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Sep-23 03:25:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:25:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:25:30 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Sep-23 03:25:30 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Sep-23 03:25:30 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2008-Sep-23 03:25:30 LOG3 vw_send: To DATATAKING: mvdata a2010 2008-Sep-23 03:25:30 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Sep-23 03:25:30 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Sep-23 03:25:30 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Sep-23 03:25:30 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Sep-23 03:25:30 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2008-Sep-23 03:25:30 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Sep-23 03:25:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:25:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Sep-23 03:25:32 LOG3 exec_msg: Closing socket