2008-Oct-31 21:35:08 BEGIN executive: CIMA executive starting ... 2008-Oct-31 21:35:09 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-31 21:35:09 INFO1 executive: Using CIMA version 3.0.06 'normal' from 2008-10-24 20:28 2008-Oct-31 21:35:09 INFO4 executive: This is an ON-LINE session 2008-Oct-31 21:35:09 INFO4 executive: This is a REMOTE session 2008-Oct-31 21:35:09 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-31 21:35:09 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Drew brisbin and betsey' 2008-Oct-31 21:35:09 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081031' 2008-Oct-31 21:35:09 LOG2 log_preferences: Currently applied preferences: 2008-Oct-31 21:35:09 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-31 21:35:09 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-31 21:35:09 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-31 21:35:09 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-31 21:35:09 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-31 21:35:09 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-31 21:35:09 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-31 21:35:09 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-31 21:35:09 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-31 21:35:09 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-31 21:35:09 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-31 21:35:09 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-31 21:35:09 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-31 21:35:09 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-31 21:35:09 ALERT executive: CIMA executive ready 2008-Oct-31 21:35:12 NOTE frontend: CIMA frontend ready 2008-Oct-31 21:35:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:35:13 LOG4 got_cormsg: From DATATAKING: setup 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Oct-31 21:35:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-31 21:35:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:35:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:35:31 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-31 21:35:31 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-31 21:35:31 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-31 21:35:31 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-31 21:35:31 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-31 21:35:31 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-31 21:35:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-31 21:35:31 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-31 21:35:31 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-31 21:35:31 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-31 21:35:31 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-31 21:35:31 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-31 21:35:31 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-31 21:35:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-31 21:35:31 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-31 21:35:31 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-31 21:35:31 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-31 21:35:31 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-31 21:35:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:35:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:35:48 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-31 21:35:48 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-31 21:35:48 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-31 21:35:48 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-31 21:35:48 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-31 21:35:48 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-31 21:35:48 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-31 21:35:48 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-31 21:35:48 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-31 21:35:48 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-31 21:35:51 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-31 21:35:51 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-31 21:35:51 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-31 21:35:52 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-31 21:36:11 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-31 21:36:33 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-31 21:36:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-31 21:36:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-31 21:36:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-31 21:36:34 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-31 21:36:34 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-31 21:36:34 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-31 21:36:34 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-31 21:36:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-31 21:36:34 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-31 21:36:34 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-31 21:36:34 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-31 21:36:34 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-31 21:36:34 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-31 21:36:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-31 21:36:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-31 21:36:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-31 21:36:36 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-31 21:36:36 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-31 21:36:36 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-31 21:36:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-31 21:36:36 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-31 21:36:36 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-31 21:36:36 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Oct-31 21:36:36 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-31 21:36:36 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-31 21:36:36 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-31 21:36:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-31 21:36:36 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-31 21:36:36 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-31 21:36:36 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-31 21:36:36 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-31 21:36:36 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-31 21:36:36 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-31 21:36:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-31 21:36:36 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-31 21:36:36 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-31 21:36:36 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-31 21:36:36 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-31 21:36:36 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-31 21:36:36 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-31 21:36:36 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-31 21:36:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-31 21:36:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-31 21:36:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-31 21:36:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-31 21:36:36 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-31 21:36:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-31 21:36:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-31 21:36:36 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-31 21:36:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-31 21:36:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-31 21:36:36 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-31 21:36:36 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-31 21:36:36 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-31 21:36:36 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-31 21:36:36 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-31 21:36:36 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-31 21:36:36 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-31 21:36:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-31 21:36:36 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-31 21:36:36 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-31 21:36:36 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-31 21:36:36 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-31 21:36:36 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-31 21:36:36 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-31 21:36:36 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-31 21:36:36 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-31 21:36:37 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-31 21:36:37 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-31 21:36:37 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-31 21:36:37 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-31 21:36:37 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-31 21:36:37 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-31 21:36:37 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-31 21:36:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:36:37 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-31 21:36:37 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-31 21:36:37 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-31 21:36:37 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-31 21:36:37 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-31 21:36:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-31 21:36:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-31 21:36:37 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-31 21:36:37 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-31 21:36:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-31 21:36:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-31 21:36:52 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-31 21:36:52 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-31 21:36:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-31 21:36:52 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-31 21:36:52 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-31 21:36:52 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-31 21:36:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-31 21:36:52 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-31 21:36:52 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-31 21:36:52 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-31 21:36:52 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-31 21:36:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-31 21:36:52 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-31 21:36:53 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-31 21:36:53 START begin_task: Starting task 'selecting calibration port' 2008-Oct-31 21:36:53 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-31 21:36:53 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-31 21:36:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-31 21:36:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-31 21:36:53 START begin_task: Starting task 'waiting on calport' 2008-Oct-31 21:36:53 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-31 21:36:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:53 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-31 21:36:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-31 21:36:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:53 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-31 21:36:53 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-31 21:36:53 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-31 21:36:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-31 21:36:53 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-31 21:36:53 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-31 21:36:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-31 21:36:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-31 21:36:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-31 21:36:53 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-31 21:36:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-31 21:36:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-31 21:36:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-31 21:36:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-31 21:36:53 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew brisbin and betsey 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew brisbin and betsey 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew brisbin and betsey 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew brisbin and betsey 2008-Oct-31 21:36:53 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-31 21:36:53 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-31 21:36:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-31 21:36:53 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-31 21:36:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-31 21:36:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-31 21:36:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-31 21:36:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-31 21:36:53 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew brisbin and betsey 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew brisbin and betsey 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew brisbin and betsey 2008-Oct-31 21:36:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew brisbin and betsey 2008-Oct-31 21:36:53 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-31 21:36:53 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-31 21:36:53 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-31 21:36:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-31 21:36:54 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-31 21:36:54 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-31 21:36:54 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-31 21:36:54 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-31 21:36:54 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-31 21:36:54 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-31 21:36:54 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-31 21:36:54 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-31 21:36:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-31 21:36:54 LOG3 track_source: Calling 'track_source galfasrc 235600.0 +055742 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-31 21:36:54 START begin_task: Starting task 'sending tracking commands' 2008-Oct-31 21:36:54 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-31 21:36:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-31 21:36:54 INFO1 track_source: Starting to track galfasrc 2008-Oct-31 21:36:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-31 21:36:54 LOG3 vw_send: To DATATAKING: set ra 235600.0 2008-Oct-31 21:36:54 LOG3 vw_send: To DATATAKING: set dec +055742 2008-Oct-31 21:36:54 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-31 21:36:54 LOG3 vw_send: To DATATAKING: pnt tr 235600.0 +055742 -CJ 2008-Oct-31 21:36:54 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-31 21:36:54 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-31 21:36:54 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-31 21:36:54 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-31 21:36:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-31 21:36:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-31 21:36:54 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-31 21:36:54 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-31 21:36:54 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-31 21:36:54 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-31 21:36:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-31 21:36:54 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-31 21:36:54 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-31 21:36:54 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-31 21:36:54 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-31 21:36:54 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-31 21:36:54 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-31 21:36:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-31 21:36:54 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-31 21:36:54 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-31 21:36:54 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-31 21:36:54 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-31 21:36:54 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-31 21:36:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew brisbin and betsey' 2008-Oct-31 21:36:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20081031.a2010.0000.fits 2008-Oct-31 21:36:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-31 21:36:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-31 21:36:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-31 21:36:54 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081031.a2010.0000.fits} 2008-Oct-31 21:36:54 LOG4 got_cormsg: From DATATAKING: set ra 235600.0 2008-Oct-31 21:36:54 LOG4 got_cormsg: From DATATAKING: set dec +055742 2008-Oct-31 21:36:54 LOG4 got_cormsg: From DATATAKING: vw% 235600.0 2008-Oct-31 21:36:54 LOG4 got_cormsg: From DATATAKING: vw% +055742 2008-Oct-31 21:36:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-31 21:36:54 LOG4 got_cormsg: From DATATAKING: pnt tr 235600.0 +055742 -CJ 2008-Oct-31 21:36:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-31 21:36:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-31 21:36:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:36:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew brisbin and betsey' 2008-Oct-31 21:37:30 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-31 21:37:30 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-31 21:37:30 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-31 21:37:30 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-31 21:37:30 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-31 21:37:30 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-31 21:37:30 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-31 21:37:30 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-31 21:37:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-31 21:37:30 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-31 21:37:30 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-31 21:37:30 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-31 21:37:30 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-31 21:37:30 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-31 21:37:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-31 21:37:30 LOG3 waittrk: Start waittrk 5 2008-Oct-31 21:37:30 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-31 21:37:30 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-31 21:37:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-31 21:37:35 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-31 21:37:35 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-31 21:37:35 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-31 21:38:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-31 21:38:16 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-31 21:38:16 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-31 21:38:16 INFO2 waittrk: Now tracking galfasrc 2008-Oct-31 21:38:16 LOG4 waittrk: Current telescope position: Az = 356.89 ZA = 12.33 2008-Oct-31 21:38:16 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-31 21:38:16 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-31 21:38:16 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-31 21:38:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-31 21:38:16 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-31 21:38:16 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-31 21:38:16 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-31 21:38:16 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-31 21:38:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-31 21:38:16 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-31 21:38:16 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-31 21:38:16 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-31 21:38:16 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-31 21:38:16 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-31 21:38:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-31 21:38:16 START begin_task: Starting task 'selecting calibration type' 2008-Oct-31 21:38:16 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-31 21:38:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-31 21:38:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-31 21:38:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-31 21:38:16 START begin_task: Starting task 'waiting on setcal' 2008-Oct-31 21:38:16 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-31 21:38:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-31 21:38:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-31 21:38:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:38:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-31 21:38:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-31 21:38:17 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-31 21:38:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-31 21:38:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-31 21:38:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-31 21:38:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-31 21:38:17 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-31 21:38:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:38:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-31 21:38:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-31 21:38:17 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-31 21:38:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-31 21:38:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-31 21:38:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-31 21:38:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-31 21:38:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-31 21:38:17 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-31 21:38:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-31 21:38:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-31 21:38:17 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-31 21:38:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-31 21:38:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-31 21:38:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-31 21:38:17 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-31 21:38:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew brisbin and betsey 2008-Oct-31 21:38:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew brisbin and betsey 2008-Oct-31 21:38:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew brisbin and betsey 2008-Oct-31 21:38:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew brisbin and betsey 2008-Oct-31 21:38:17 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081031.a2010.0000.fits' is empty! 2008-Oct-31 21:38:17 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-31 21:38:17 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-31 21:38:17 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-31 21:38:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-31 21:38:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-31 21:38:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-31 21:38:17 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-31 21:38:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-31 21:38:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-31 21:38:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-31 21:38:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-31 21:38:17 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-31 21:38:17 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-31 21:38:17 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-31 21:38:17 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-31 21:38:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-31 21:38:17 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-31 21:38:17 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-31 21:38:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-31 21:38:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-31 21:38:17 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-31 21:38:17 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-31 21:38:17 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-31 21:38:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-31 21:38:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew brisbin and betsey' 2008-Oct-31 21:38:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:38:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-31 21:38:20 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-31 21:38:20 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-31 21:38:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-31 21:38:20 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-31 21:38:20 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-31 21:38:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-31 21:38:20 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-31 21:38:20 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-31 21:38:20 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-31 21:38:20 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-31 21:38:20 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-31 21:38:20 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-31 21:38:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-31 21:38:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:38:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-31 21:38:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2008-Oct-31 21:38:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2008-Oct-31 21:38:21 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2008-Oct-31 21:38:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-31 21:38:21 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-31 21:38:21 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-31 21:38:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.076 1.012 ALFA beam 1: 1.062 1.022 2008-Oct-31 21:38:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.918 0.952 ALFA beam 3: 0.954 1.066 2008-Oct-31 21:38:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.959 1.036 ALFA beam 5: 0.992 1.059 2008-Oct-31 21:38:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.879 0.098 ALFA beam 7: 0.973 0.108 2008-Oct-31 21:38:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-31 21:38:21 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-31 21:38:21 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-31 21:38:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-31 21:38:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-31 21:38:21 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-31 21:38:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-31 21:38:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-31 21:38:21 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-31 21:38:21 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-31 21:38:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-31 21:38:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-31 21:38:21 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-31 21:38:21 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-31 21:38:21 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-31 21:38:21 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-31 21:38:21 LOG5 antvel: Calling 'antvel 235600.000000 55742.000000 J 0' 2008-Oct-31 21:38:21 LOG2 antvel: Precessing RA = 23:56:00.0 Dec = +05:57:42.0 Epoch = 2008.83751 J 2008-Oct-31 21:38:21 LOG2 antvel: Computed apparent RA = 23:56:28.7 Dec = +06:00:50.9 2008-Oct-31 21:38:21 LOG2 antvel: Parameters to Doppler: Topocentric 92301 2008 305 0.0 2008-Oct-31 21:38:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-31 21:38:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-31 21:38:21 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-31 21:38:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-31 21:38:21 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-31 21:38:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-31 21:38:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:38:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-31 21:38:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-31 21:38:21 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-31 21:38:21 LOG5 log_alfabeam: Parameters: 23.933333333333334 5.9616666666666669 23.903439 2008.8375130238039 18.999933 2008-Oct-31 21:38:21 LOG4 log_alfabeam: ALFABEAM 0 23.933333333333291 5.961666666666670 2008-Oct-31 21:38:21 LOG4 log_alfabeam: ALFABEAM 1 23.931869775691545 6.065535857821597 2008-Oct-31 21:38:21 LOG4 log_alfabeam: ALFABEAM 2 23.927459458173146 5.992905212017764 2008-Oct-31 21:38:21 LOG4 log_alfabeam: ALFABEAM 3 23.928891884376206 5.888923781203973 2008-Oct-31 21:38:21 LOG4 log_alfabeam: ALFABEAM 4 23.934815751647715 5.857833458743023 2008-Oct-31 21:38:21 LOG4 log_alfabeam: ALFABEAM 5 23.939236839825416 5.931029437136423 2008-Oct-31 21:38:21 LOG4 log_alfabeam: ALFABEAM 6 23.937723333149833 6.034747033649749 2008-Oct-31 21:38:21 INFO2 take_data: Starting WAPP+GALFA scan: 830500144 2008-Oct-31 21:38:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-31 21:38:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-31 21:38:22 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-31 21:38:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-31 21:38:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-31 21:38:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:38:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:38:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:38:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5903.00 2008-Oct-31 21:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-31 21:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:38:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Oct-31 21:38:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 1.038 1.096 1.044 2008-Oct-31 21:38:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.952 0.954 1.066 2008-Oct-31 21:38:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.006 1.074 1.053 1.100 2008-Oct-31 21:38:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.879 0.098 0.973 0.108 2008-Oct-31 21:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2008-Oct-31 21:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2008-Oct-31 21:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2008-Oct-31 21:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2008-Oct-31 21:38:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-31 21:38:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-31 21:38:33 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-31 21:38:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-31 21:38:33 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-31 21:38:33 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-31 21:38:33 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-31 21:38:33 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-31 21:38:33 LOG5 antvel: Calling 'antvel 235600.000000 55742.000000 J 0' 2008-Oct-31 21:38:33 LOG2 antvel: Precessing RA = 23:56:00.0 Dec = +05:57:42.0 Epoch = 2008.83751 J 2008-Oct-31 21:38:33 LOG2 antvel: Computed apparent RA = 23:56:28.7 Dec = +06:00:50.9 2008-Oct-31 21:38:33 LOG2 antvel: Parameters to Doppler: Topocentric 92313 2008 305 0.0 2008-Oct-31 21:38:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-31 21:38:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-31 21:38:33 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-31 21:38:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-31 21:38:33 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-31 21:38:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-31 21:38:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:38:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-31 21:38:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-31 21:38:33 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-31 21:38:33 LOG5 log_alfabeam: Parameters: 23.933333333333334 5.9616666666666669 23.906781 2008.8375134040612 18.999933 2008-Oct-31 21:38:33 LOG4 log_alfabeam: ALFABEAM 0 23.933333333333355 5.961666666666668 2008-Oct-31 21:38:33 LOG4 log_alfabeam: ALFABEAM 1 23.931896790841751 6.065619747498769 2008-Oct-31 21:38:33 LOG4 log_alfabeam: ALFABEAM 2 23.927467623074577 5.993244837029665 2008-Oct-31 21:38:33 LOG4 log_alfabeam: ALFABEAM 3 23.928873007530601 5.889181298956282 2008-Oct-31 21:38:33 LOG4 log_alfabeam: ALFABEAM 4 23.934788759070646 5.857748483586331 2008-Oct-31 21:38:33 LOG4 log_alfabeam: ALFABEAM 5 23.939228833526620 5.930688199621559 2008-Oct-31 21:38:33 LOG4 log_alfabeam: ALFABEAM 6 23.937742291968846 6.034492549897602 2008-Oct-31 21:38:33 INFO2 take_data: Starting WAPP+GALFA scan: 830500145 2008-Oct-31 21:38:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-31 21:38:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-31 21:38:34 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-31 21:38:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-31 21:38:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-31 21:38:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:38:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:38:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2008-Oct-31 21:38:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5915.00 2008-Oct-31 21:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-31 21:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2008-Oct-31 21:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-31 21:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-31 21:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-31 21:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-31 21:38:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-31 21:38:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-31 21:38:45 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-31 21:38:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-31 21:38:45 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-31 21:38:45 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-31 21:38:45 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-31 21:38:45 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-31 21:38:45 LOG5 antvel: Calling 'antvel 235600.000000 55742.000000 J 0' 2008-Oct-31 21:38:45 LOG2 antvel: Precessing RA = 23:56:00.0 Dec = +05:57:42.0 Epoch = 2008.83751 J 2008-Oct-31 21:38:45 LOG2 antvel: Computed apparent RA = 23:56:28.7 Dec = +06:00:50.9 2008-Oct-31 21:38:45 LOG2 antvel: Parameters to Doppler: Topocentric 92325 2008 305 0.0 2008-Oct-31 21:38:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-31 21:38:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-31 21:38:45 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-31 21:38:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-31 21:38:45 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-31 21:38:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-31 21:38:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:38:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-31 21:38:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-31 21:38:45 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-31 21:38:45 LOG5 log_alfabeam: Parameters: 23.933333333333334 5.9616666666666669 23.910124 2008.8375137843182 18.999933 2008-Oct-31 21:38:45 LOG4 log_alfabeam: ALFABEAM 0 23.933333333333319 5.961666666666670 2008-Oct-31 21:38:45 LOG4 log_alfabeam: ALFABEAM 1 23.931923844368470 6.065702124336880 2008-Oct-31 21:38:45 LOG4 log_alfabeam: ALFABEAM 2 23.927475881159541 5.993584194074080 2008-Oct-31 21:38:45 LOG4 log_alfabeam: ALFABEAM 3 23.928854186419539 5.889440066307641 2008-Oct-31 21:38:45 LOG4 log_alfabeam: ALFABEAM 4 23.934761727561000 5.857665018536394 2008-Oct-31 21:38:45 LOG4 log_alfabeam: ALFABEAM 5 23.939220733286220 5.930347209705866 2008-Oct-31 21:38:45 LOG4 log_alfabeam: ALFABEAM 6 23.937761196702869 6.034236808525785 2008-Oct-31 21:38:45 INFO2 take_data: Starting WAPP+GALFA scan: 830500146 2008-Oct-31 21:38:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-31 21:38:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-31 21:38:46 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-31 21:38:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-31 21:38:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-31 21:38:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:38:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:38:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:38:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5927.00 2008-Oct-31 21:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-31 21:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-31 21:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-31 21:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-31 21:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-31 21:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-31 21:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-31 21:38:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-31 21:38:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-31 21:38:57 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-31 21:38:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-31 21:38:57 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-31 21:38:57 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-31 21:38:57 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-31 21:38:57 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-31 21:38:57 LOG5 antvel: Calling 'antvel 235600.000000 55742.000000 J 0' 2008-Oct-31 21:38:57 LOG2 antvel: Precessing RA = 23:56:00.0 Dec = +05:57:42.0 Epoch = 2008.83751 J 2008-Oct-31 21:38:57 LOG2 antvel: Computed apparent RA = 23:56:28.7 Dec = +06:00:50.9 2008-Oct-31 21:38:57 LOG2 antvel: Parameters to Doppler: Topocentric 92337 2008 305 0.0 2008-Oct-31 21:38:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-31 21:38:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-31 21:38:57 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-31 21:38:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-31 21:38:57 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-31 21:38:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-31 21:38:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:38:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-31 21:38:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-31 21:38:57 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-31 21:38:57 LOG5 log_alfabeam: Parameters: 23.933333333333334 5.9616666666666669 23.913466 2008.8375141645752 18.999933 2008-Oct-31 21:38:57 LOG4 log_alfabeam: ALFABEAM 0 23.933333333333270 5.961666666666670 2008-Oct-31 21:38:57 LOG4 log_alfabeam: ALFABEAM 1 23.931950918839085 6.065782933764917 2008-Oct-31 21:38:57 LOG4 log_alfabeam: ALFABEAM 2 23.927484227178720 5.993923063826129 2008-Oct-31 21:38:57 LOG4 log_alfabeam: ALFABEAM 3 23.928835433245101 5.889699917267802 2008-Oct-31 21:38:57 LOG4 log_alfabeam: ALFABEAM 4 23.934734674535772 5.857583118917224 2008-Oct-31 21:38:57 LOG4 log_alfabeam: ALFABEAM 5 23.939212544243027 5.930006687829438 2008-Oct-31 21:38:57 LOG4 log_alfabeam: ALFABEAM 6 23.937780035093255 6.033979973416853 2008-Oct-31 21:38:57 INFO2 take_data: Starting WAPP+GALFA scan: 830500147 2008-Oct-31 21:38:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-31 21:38:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-31 21:38:58 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-31 21:38:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-31 21:38:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-31 21:38:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:38:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:38:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:38:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5939.00 2008-Oct-31 21:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-31 21:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-31 21:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-31 21:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-31 21:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-31 21:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-31 21:39:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-31 21:39:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-31 21:39:09 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-31 21:39:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-31 21:39:09 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-31 21:39:09 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-31 21:39:09 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-31 21:39:09 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-31 21:39:09 LOG5 antvel: Calling 'antvel 235600.000000 55742.000000 J 0' 2008-Oct-31 21:39:09 LOG2 antvel: Precessing RA = 23:56:00.0 Dec = +05:57:42.0 Epoch = 2008.83751 J 2008-Oct-31 21:39:09 LOG2 antvel: Computed apparent RA = 23:56:28.7 Dec = +06:00:50.9 2008-Oct-31 21:39:09 LOG2 antvel: Parameters to Doppler: Topocentric 92349 2008 305 0.0 2008-Oct-31 21:39:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-31 21:39:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-31 21:39:09 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-31 21:39:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-31 21:39:09 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-31 21:39:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-31 21:39:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:39:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-31 21:39:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-31 21:39:09 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-31 21:39:09 LOG5 log_alfabeam: Parameters: 23.933333333333334 5.9616666666666669 23.916808 2008.8375145448322 18.999933 2008-Oct-31 21:39:09 LOG4 log_alfabeam: ALFABEAM 0 23.933333333333270 5.961666666666668 2008-Oct-31 21:39:09 LOG4 log_alfabeam: ALFABEAM 1 23.931978021089289 6.065862195584109 2008-Oct-31 21:39:09 LOG4 log_alfabeam: ALFABEAM 2 23.927492663267625 5.994261531601014 2008-Oct-31 21:39:09 LOG4 log_alfabeam: ALFABEAM 3 23.928816743302242 5.889960917716504 2008-Oct-31 21:39:09 LOG4 log_alfabeam: ALFABEAM 4 23.934707593163306 5.857502764704847 2008-Oct-31 21:39:09 LOG4 log_alfabeam: ALFABEAM 5 23.939204264293959 5.929666548333751 2008-Oct-31 21:39:09 LOG4 log_alfabeam: ALFABEAM 6 23.937798811863392 6.033721979301615 2008-Oct-31 21:39:09 INFO2 take_data: Starting WAPP+GALFA scan: 830500148 2008-Oct-31 21:39:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-31 21:39:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-31 21:39:10 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-31 21:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-31 21:39:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-31 21:39:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-31 21:39:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:39:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:39:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:39:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5951.00 2008-Oct-31 21:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-31 21:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.090 (still bad) 2008-Oct-31 21:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2008-Oct-31 21:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2008-Oct-31 21:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.087 (still bad) 2008-Oct-31 21:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.085 (still bad) 2008-Oct-31 21:39:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-31 21:39:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-31 21:39:21 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-31 21:39:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-31 21:39:21 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-31 21:39:21 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-31 21:39:21 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-31 21:39:21 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-31 21:39:21 LOG5 antvel: Calling 'antvel 235600.000000 55742.000000 J 0' 2008-Oct-31 21:39:21 LOG2 antvel: Precessing RA = 23:56:00.0 Dec = +05:57:42.0 Epoch = 2008.83751 J 2008-Oct-31 21:39:21 LOG2 antvel: Computed apparent RA = 23:56:28.7 Dec = +06:00:50.9 2008-Oct-31 21:39:21 LOG2 antvel: Parameters to Doppler: Topocentric 92361 2008 305 0.0 2008-Oct-31 21:39:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-31 21:39:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-31 21:39:21 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-31 21:39:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-31 21:39:21 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-31 21:39:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-31 21:39:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:39:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-31 21:39:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-31 21:39:21 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-31 21:39:21 LOG5 log_alfabeam: Parameters: 23.933333333333334 5.9616666666666669 23.920151 2008.8375149250894 18.999933 2008-Oct-31 21:39:21 LOG4 log_alfabeam: ALFABEAM 0 23.933333333333334 5.961666666666668 2008-Oct-31 21:39:21 LOG4 log_alfabeam: ALFABEAM 1 23.932005157983330 6.065939927960759 2008-Oct-31 21:39:21 LOG4 log_alfabeam: ALFABEAM 2 23.927501191655725 5.994599682278476 2008-Oct-31 21:39:21 LOG4 log_alfabeam: ALFABEAM 3 23.928798111952492 5.890223134736716 2008-Oct-31 21:39:21 LOG4 log_alfabeam: ALFABEAM 4 23.934680476583090 5.857423937508133 2008-Oct-31 21:39:21 LOG4 log_alfabeam: ALFABEAM 5 23.939195891239724 5.929326705976144 2008-Oct-31 21:39:21 LOG4 log_alfabeam: ALFABEAM 6 23.937817531670770 6.033462759697849 2008-Oct-31 21:39:21 INFO2 take_data: Starting WAPP+GALFA scan: 830500149 2008-Oct-31 21:39:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-31 21:39:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-31 21:39:22 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-31 21:39:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-31 21:39:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-31 21:39:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:39:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:39:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.086 (still bad) 2008-Oct-31 21:39:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5963.00 2008-Oct-31 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-31 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2008-Oct-31 21:39:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-31 21:39:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 1.004 1.055 1.021 2008-Oct-31 21:39:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.947 0.963 1.084 2008-Oct-31 21:39:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.969 1.057 0.978 1.054 2008-Oct-31 21:39:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.893 0.099 0.983 0.110 2008-Oct-31 21:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2008-Oct-31 21:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.084 (still bad) 2008-Oct-31 21:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.083 (still bad) 2008-Oct-31 21:39:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-31 21:39:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-31 21:39:33 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-31 21:39:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-31 21:39:33 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-31 21:39:33 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-31 21:39:33 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-31 21:39:33 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-31 21:39:33 LOG5 antvel: Calling 'antvel 235600.000000 55742.000000 J 0' 2008-Oct-31 21:39:33 LOG2 antvel: Precessing RA = 23:56:00.0 Dec = +05:57:42.0 Epoch = 2008.83752 J 2008-Oct-31 21:39:33 LOG2 antvel: Computed apparent RA = 23:56:28.7 Dec = +06:00:50.9 2008-Oct-31 21:39:33 LOG2 antvel: Parameters to Doppler: Topocentric 92373 2008 305 0.0 2008-Oct-31 21:39:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-31 21:39:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-31 21:39:33 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-31 21:39:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-31 21:39:33 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-31 21:39:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-31 21:39:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:39:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-31 21:39:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-31 21:39:33 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-31 21:39:33 LOG5 log_alfabeam: Parameters: 23.933333333333334 5.9616666666666669 23.923493 2008.8375153053464 18.999933 2008-Oct-31 21:39:33 LOG4 log_alfabeam: ALFABEAM 0 23.933333333333337 5.961666666666666 2008-Oct-31 21:39:33 LOG4 log_alfabeam: ALFABEAM 1 23.932032312023690 6.066016079754642 2008-Oct-31 21:39:33 LOG4 log_alfabeam: ALFABEAM 2 23.927509806892520 5.994937297392170 2008-Oct-31 21:39:33 LOG4 log_alfabeam: ALFABEAM 3 23.928779551259396 5.890486399756249 2008-Oct-31 21:39:33 LOG4 log_alfabeam: ALFABEAM 4 23.934653342278004 5.857346689225689 2008-Oct-31 21:39:33 LOG4 log_alfabeam: ALFABEAM 5 23.939187430422169 5.928987380384829 2008-Oct-31 21:39:33 LOG4 log_alfabeam: ALFABEAM 6 23.937836182391464 6.033202481091505 2008-Oct-31 21:39:33 INFO2 take_data: Starting WAPP+GALFA scan: 830500150 2008-Oct-31 21:39:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-31 21:39:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-31 21:39:34 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-31 21:39:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-31 21:39:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-31 21:39:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:39:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:39:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:39:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5975.00 2008-Oct-31 21:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.084 (still bad) 2008-Oct-31 21:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-31 21:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.080 (still bad) 2008-Oct-31 21:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.080 (still bad) 2008-Oct-31 21:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.080 (still bad) 2008-Oct-31 21:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.082 (still bad) 2008-Oct-31 21:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.081 (still bad) 2008-Oct-31 21:39:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-31 21:39:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-31 21:39:45 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-31 21:39:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-31 21:39:45 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-31 21:39:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-31 21:39:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-31 21:39:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-31 21:39:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-31 21:39:45 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-31 21:39:45 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-31 21:39:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-31 21:39:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-31 21:39:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-31 21:39:45 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-31 21:39:45 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-31 21:39:45 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-31 21:39:45 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-31 21:39:45 LOG5 antvel: Calling 'antvel 235600.000000 55742.000000 J 0' 2008-Oct-31 21:39:45 LOG2 antvel: Precessing RA = 23:56:00.0 Dec = +05:57:42.0 Epoch = 2008.83752 J 2008-Oct-31 21:39:45 LOG2 antvel: Computed apparent RA = 23:56:28.7 Dec = +06:00:50.9 2008-Oct-31 21:39:45 LOG2 antvel: Parameters to Doppler: Topocentric 92385 2008 305 0.0 2008-Oct-31 21:39:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-31 21:39:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-31 21:39:45 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-31 21:39:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-31 21:39:45 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-31 21:39:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-31 21:39:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:39:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-31 21:39:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-31 21:39:45 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-31 21:39:45 LOG5 log_alfabeam: Parameters: 23.933333333333334 5.9616666666666669 23.926836 2008.8375156856034 18.999933 2008-Oct-31 21:39:45 LOG4 log_alfabeam: ALFABEAM 0 23.933333333333291 5.961666666666668 2008-Oct-31 21:39:45 LOG4 log_alfabeam: ALFABEAM 1 23.932059498193773 6.066090692121231 2008-Oct-31 21:39:45 LOG4 log_alfabeam: ALFABEAM 2 23.927518513773304 5.995274562870281 2008-Oct-31 21:39:45 LOG4 log_alfabeam: ALFABEAM 3 23.928761051024413 5.890750858455265 2008-Oct-31 21:39:45 LOG4 log_alfabeam: ALFABEAM 4 23.934626175274609 5.857270978149932 2008-Oct-31 21:39:45 LOG4 log_alfabeam: ALFABEAM 5 23.939178877123691 5.928648384761679 2008-Oct-31 21:39:45 LOG4 log_alfabeam: ALFABEAM 6 23.937854774270452 6.032940999298297 2008-Oct-31 21:39:45 INFO2 take_data: Starting WAPP+GALFA scan: 830500151 2008-Oct-31 21:39:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-31 21:39:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-31 21:39:46 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-31 21:39:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-31 21:39:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-31 21:39:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:39:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:39:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:39:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5987.00 2008-Oct-31 21:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.081 (still bad) 2008-Oct-31 21:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-31 21:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.523 (still bad) 2008-Oct-31 21:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.526 (still bad) 2008-Oct-31 21:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.526 (still bad) 2008-Oct-31 21:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.525 (still bad) 2008-Oct-31 21:39:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-31 21:39:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-31 21:39:57 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-31 21:39:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-31 21:39:57 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-31 21:39:57 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-31 21:39:57 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-31 21:39:57 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-31 21:39:57 LOG5 antvel: Calling 'antvel 235600.000000 55742.000000 J 0' 2008-Oct-31 21:39:57 LOG2 antvel: Precessing RA = 23:56:00.0 Dec = +05:57:42.0 Epoch = 2008.83752 J 2008-Oct-31 21:39:57 LOG2 antvel: Computed apparent RA = 23:56:28.7 Dec = +06:00:50.9 2008-Oct-31 21:39:57 LOG2 antvel: Parameters to Doppler: Topocentric 92397 2008 305 0.0 2008-Oct-31 21:39:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-31 21:39:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-31 21:39:57 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-31 21:39:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-31 21:39:57 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-31 21:39:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-31 21:39:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:39:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-31 21:39:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-31 21:39:57 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-31 21:39:57 LOG5 log_alfabeam: Parameters: 23.933333333333334 5.9616666666666669 23.930178 2008.8375160658604 18.999933 2008-Oct-31 21:39:57 LOG4 log_alfabeam: ALFABEAM 0 23.933333333333039 5.961666666666670 2008-Oct-31 21:39:57 LOG4 log_alfabeam: ALFABEAM 1 23.932086698958315 6.066163716228490 2008-Oct-31 21:39:57 LOG4 log_alfabeam: ALFABEAM 2 23.927527306715628 5.995611260886614 2008-Oct-31 21:39:57 LOG4 log_alfabeam: ALFABEAM 3 23.928742623214305 5.891016340587883 2008-Oct-31 21:39:57 LOG4 log_alfabeam: ALFABEAM 4 23.934598993094301 5.857196853874498 2008-Oct-31 21:39:57 LOG4 log_alfabeam: ALFABEAM 5 23.939170236820310 5.928309938125248 2008-Oct-31 21:39:57 LOG4 log_alfabeam: ALFABEAM 6 23.937873295277779 6.032678482493635 2008-Oct-31 21:39:57 INFO2 take_data: Starting WAPP+GALFA scan: 830500152 2008-Oct-31 21:39:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-31 21:39:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-31 21:39:58 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-31 21:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.525 (still bad) 2008-Oct-31 21:39:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-31 21:39:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-31 21:39:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:39:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:39:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:39:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5999.00 2008-Oct-31 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-31 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.518 (still bad) 2008-Oct-31 21:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.519 (still bad) 2008-Oct-31 21:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.518 (still bad) 2008-Oct-31 21:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.518 (still bad) 2008-Oct-31 21:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.518 (still bad) 2008-Oct-31 21:40:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-31 21:40:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-31 21:40:09 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-31 21:40:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-31 21:40:09 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-31 21:40:09 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-31 21:40:09 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-31 21:40:09 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-31 21:40:09 LOG5 antvel: Calling 'antvel 235600.000000 55742.000000 J 0' 2008-Oct-31 21:40:09 LOG2 antvel: Precessing RA = 23:56:00.0 Dec = +05:57:42.0 Epoch = 2008.83752 J 2008-Oct-31 21:40:09 LOG2 antvel: Computed apparent RA = 23:56:28.7 Dec = +06:00:50.9 2008-Oct-31 21:40:09 LOG2 antvel: Parameters to Doppler: Topocentric 92409 2008 305 0.0 2008-Oct-31 21:40:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-31 21:40:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-31 21:40:09 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-31 21:40:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-31 21:40:09 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-31 21:40:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-31 21:40:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:40:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-31 21:40:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-31 21:40:09 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-31 21:40:09 LOG5 log_alfabeam: Parameters: 23.933333333333334 5.9616666666666669 23.933521 2008.8375164461174 18.999933 2008-Oct-31 21:40:09 LOG4 log_alfabeam: ALFABEAM 0 23.933333333333124 5.961666666666674 2008-Oct-31 21:40:09 LOG4 log_alfabeam: ALFABEAM 1 23.932113929320856 6.066235191804203 2008-Oct-31 21:40:09 LOG4 log_alfabeam: ALFABEAM 2 23.927536190594171 5.995947576938716 2008-Oct-31 21:40:09 LOG4 log_alfabeam: ALFABEAM 3 23.928724257691684 5.891282992833757 2008-Oct-31 21:40:09 LOG4 log_alfabeam: ALFABEAM 4 23.934571780743212 5.857124276118004 2008-Oct-31 21:40:09 LOG4 log_alfabeam: ALFABEAM 5 23.939161504712786 5.927971854092540 2008-Oct-31 21:40:09 LOG4 log_alfabeam: ALFABEAM 6 23.937891755598095 6.032414785484708 2008-Oct-31 21:40:09 INFO2 take_data: Starting WAPP+GALFA scan: 830500153 2008-Oct-31 21:40:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-31 21:40:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-31 21:40:10 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-31 21:40:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-31 21:40:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-31 21:40:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:40:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:40:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.518 (still bad) 2008-Oct-31 21:40:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6011.00 2008-Oct-31 21:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-31 21:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.512 (still bad) 2008-Oct-31 21:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.512 (still bad) 2008-Oct-31 21:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.515 (still bad) 2008-Oct-31 21:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.513 (still bad) 2008-Oct-31 21:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.514 (still bad) 2008-Oct-31 21:40:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-31 21:40:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-31 21:40:21 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-31 21:40:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-31 21:40:21 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-31 21:40:21 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-31 21:40:21 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-31 21:40:21 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-31 21:40:21 LOG5 antvel: Calling 'antvel 235600.000000 55742.000000 J 0' 2008-Oct-31 21:40:21 LOG2 antvel: Precessing RA = 23:56:00.0 Dec = +05:57:42.0 Epoch = 2008.83752 J 2008-Oct-31 21:40:21 LOG2 antvel: Computed apparent RA = 23:56:28.7 Dec = +06:00:50.9 2008-Oct-31 21:40:21 LOG2 antvel: Parameters to Doppler: Topocentric 92421 2008 305 0.0 2008-Oct-31 21:40:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-31 21:40:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-31 21:40:21 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-31 21:40:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-31 21:40:21 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-31 21:40:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-31 21:40:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:40:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-31 21:40:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-31 21:40:21 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-31 21:40:21 LOG5 log_alfabeam: Parameters: 23.933333333333334 5.9616666666666669 23.936863 2008.8375168263747 18.999933 2008-Oct-31 21:40:21 LOG4 log_alfabeam: ALFABEAM 0 23.933333333332801 5.961666666666670 2008-Oct-31 21:40:21 LOG4 log_alfabeam: ALFABEAM 1 23.932141171712626 6.066305072339218 2008-Oct-31 21:40:21 LOG4 log_alfabeam: ALFABEAM 2 23.927545159693825 5.996283293894208 2008-Oct-31 21:40:21 LOG4 log_alfabeam: ALFABEAM 3 23.928705966325719 5.891550643312969 2008-Oct-31 21:40:21 LOG4 log_alfabeam: ALFABEAM 4 23.934544555777343 5.857053292154148 2008-Oct-31 21:40:21 LOG4 log_alfabeam: ALFABEAM 5 23.939152686409710 5.927634351018201 2008-Oct-31 21:40:21 LOG4 log_alfabeam: ALFABEAM 6 23.937910143298360 6.032150078097726 2008-Oct-31 21:40:21 INFO2 take_data: Starting WAPP+GALFA scan: 830500154 2008-Oct-31 21:40:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-31 21:40:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-31 21:40:22 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-31 21:40:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-31 21:40:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-31 21:40:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:40:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:40:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:40:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6023.00 2008-Oct-31 21:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.512 (still bad) 2008-Oct-31 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-31 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.499 (still bad) 2008-Oct-31 21:40:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-31 21:40:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.496 1.372 1.446 1.380 2008-Oct-31 21:40:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.266 1.308 1.356 1.498 2008-Oct-31 21:40:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.373 1.479 1.395 1.416 2008-Oct-31 21:40:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.242 0.100 1.367 0.110 2008-Oct-31 21:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.499 (still bad) 2008-Oct-31 21:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.500 (still bad) 2008-Oct-31 21:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.499 (still bad) 2008-Oct-31 21:40:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-31 21:40:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-31 21:40:33 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-31 21:40:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-31 21:40:33 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-31 21:40:33 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-31 21:40:33 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-31 21:40:33 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-31 21:40:33 LOG5 antvel: Calling 'antvel 235600.000000 55742.000000 J 0' 2008-Oct-31 21:40:33 LOG2 antvel: Precessing RA = 23:56:00.0 Dec = +05:57:42.0 Epoch = 2008.83752 J 2008-Oct-31 21:40:33 LOG2 antvel: Computed apparent RA = 23:56:28.7 Dec = +06:00:50.9 2008-Oct-31 21:40:33 LOG2 antvel: Parameters to Doppler: Topocentric 92433 2008 305 0.0 2008-Oct-31 21:40:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-31 21:40:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-31 21:40:33 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-31 21:40:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-31 21:40:33 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-31 21:40:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-31 21:40:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:40:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-31 21:40:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-31 21:40:33 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-31 21:40:33 LOG5 log_alfabeam: Parameters: 23.933333333333334 5.9616666666666669 23.940206 2008.8375172066317 18.999933 2008-Oct-31 21:40:33 LOG4 log_alfabeam: ALFABEAM 0 23.933333333331824 5.961666666666672 2008-Oct-31 21:40:33 LOG4 log_alfabeam: ALFABEAM 1 23.932168441153266 6.066373396128503 2008-Oct-31 21:40:33 LOG4 log_alfabeam: ALFABEAM 2 23.927554218969583 5.996618596797220 2008-Oct-31 21:40:33 LOG4 log_alfabeam: ALFABEAM 3 23.928687739035460 5.891819439686859 2008-Oct-31 21:40:33 LOG4 log_alfabeam: ALFABEAM 4 23.934517303180044 5.856983863133027 2008-Oct-31 21:40:33 LOG4 log_alfabeam: ALFABEAM 5 23.939143777028544 5.927297242957444 2008-Oct-31 21:40:33 LOG4 log_alfabeam: ALFABEAM 6 23.937928468499521 6.031884214148914 2008-Oct-31 21:40:33 INFO2 take_data: Starting WAPP+GALFA scan: 830500155 2008-Oct-31 21:40:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-31 21:40:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-31 21:40:34 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-31 21:40:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-31 21:40:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-31 21:40:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:40:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:40:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:40:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6035.00 2008-Oct-31 21:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.499 (still bad) 2008-Oct-31 21:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-31 21:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.485 (still bad) 2008-Oct-31 21:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.486 (still bad) 2008-Oct-31 21:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.485 (still bad) 2008-Oct-31 21:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.485 (still bad) 2008-Oct-31 21:40:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-31 21:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.486 (still bad) 2008-Oct-31 21:40:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-31 21:40:45 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-31 21:40:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-31 21:40:45 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-31 21:40:45 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-31 21:40:45 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-31 21:40:45 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-31 21:40:45 LOG5 antvel: Calling 'antvel 235600.000000 55742.000000 J 0' 2008-Oct-31 21:40:45 LOG2 antvel: Precessing RA = 23:56:00.0 Dec = +05:57:42.0 Epoch = 2008.83752 J 2008-Oct-31 21:40:45 LOG2 antvel: Computed apparent RA = 23:56:28.7 Dec = +06:00:50.9 2008-Oct-31 21:40:45 LOG2 antvel: Parameters to Doppler: Topocentric 92445 2008 305 0.0 2008-Oct-31 21:40:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-31 21:40:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-31 21:40:45 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-31 21:40:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-31 21:40:45 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-31 21:40:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-31 21:40:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:40:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-31 21:40:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-31 21:40:45 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-31 21:40:45 LOG5 log_alfabeam: Parameters: 23.933333333333334 5.9616666666666669 23.943548 2008.8375175868887 18.999933 2008-Oct-31 21:40:45 LOG4 log_alfabeam: ALFABEAM 0 23.933333333333984 5.961666666666668 2008-Oct-31 21:40:45 LOG4 log_alfabeam: ALFABEAM 1 23.932195720050391 6.066440118998372 2008-Oct-31 21:40:45 LOG4 log_alfabeam: ALFABEAM 2 23.927563362583438 5.996953269261491 2008-Oct-31 21:40:45 LOG4 log_alfabeam: ALFABEAM 3 23.928669587597085 5.892089208481739 2008-Oct-31 21:40:45 LOG4 log_alfabeam: ALFABEAM 4 23.934490040548805 5.856916033995320 2008-Oct-31 21:40:45 LOG4 log_alfabeam: ALFABEAM 5 23.939134782319183 5.926960747548080 2008-Oct-31 21:40:45 LOG4 log_alfabeam: ALFABEAM 6 23.937946719377262 6.031617365076057 2008-Oct-31 21:40:45 INFO2 take_data: Starting WAPP+GALFA scan: 830500156 2008-Oct-31 21:40:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-31 21:40:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-31 21:40:46 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-31 21:40:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-31 21:40:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-31 21:40:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-31 21:40:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:40:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-31 21:40:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6047.00 2008-Oct-31 21:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.486 (still bad) 2008-Oct-31 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-31 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2008-Oct-31 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2008-Oct-31 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2008-Oct-31 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2008-Oct-31 21:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.482 (still bad) 2008-Oct-31 21:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.484 (still bad) 2008-Oct-31 21:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.483 (still bad) 2008-Oct-31 21:40:55 INFO5 check_wapp_levels: WAPP power leve