2008-Oct-27 19:20:51 BEGIN executive: CIMA executive starting ... 2008-Oct-27 19:20:52 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-27 19:20:52 INFO1 executive: Using CIMA version 3.0.06 'normal' from 2008-10-24 20:28 2008-Oct-27 19:20:52 INFO4 executive: This is an ON-LINE session 2008-Oct-27 19:20:52 INFO4 executive: This is a LOCAL session 2008-Oct-27 19:20:52 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-27 19:20:52 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'CA and KS' 2008-Oct-27 19:20:52 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081027' 2008-Oct-27 19:20:52 LOG2 log_preferences: Currently applied preferences: 2008-Oct-27 19:20:52 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-27 19:20:52 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-27 19:20:52 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-27 19:20:52 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-27 19:20:52 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-27 19:20:52 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-27 19:20:52 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-27 19:20:52 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-27 19:20:52 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-27 19:20:52 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-27 19:20:52 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-27 19:20:52 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-27 19:20:52 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-27 19:20:52 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-27 19:20:52 ALERT executive: CIMA executive ready 2008-Oct-27 19:20:53 NOTE frontend: CIMA frontend ready 2008-Oct-27 19:20:55 LOG4 got_cormsg: From DATATAKING: vw% setup 2008-Oct-27 19:20:57 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-27 19:20:57 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-27 19:20:57 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-27 19:20:57 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-27 19:20:57 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-27 19:20:57 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-27 19:20:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-27 19:20:57 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-27 19:20:57 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-27 19:20:57 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-27 19:20:57 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-27 19:20:57 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-27 19:20:57 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-27 19:20:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-27 19:20:57 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-27 19:20:57 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-27 19:21:01 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-27 19:21:01 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-27 19:21:01 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-27 19:21:01 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-27 19:21:01 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-27 19:21:01 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-27 19:21:01 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-27 19:21:01 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-27 19:21:01 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-27 19:21:01 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-27 19:21:02 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Oct-27 19:21:02 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Oct-27 19:21:02 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-27 19:21:02 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-27 19:21:02 LOG4 got_cormsg: From DATATAKING: 2008-Oct-27 19:21:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-27 19:21:03 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:04 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-27 19:21:05 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-27 19:21:05 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-27 19:21:05 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-27 19:21:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:13 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-27 19:21:20 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-27 19:21:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-27 19:21:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-27 19:21:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-27 19:21:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-27 19:21:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-27 19:21:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-27 19:21:20 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-27 19:21:20 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-27 19:21:20 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-27 19:21:20 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-27 19:21:20 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-27 19:21:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-27 19:21:20 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-27 19:21:20 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-27 19:21:20 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-27 19:21:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-27 19:21:20 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-27 19:21:20 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-27 19:21:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-27 19:21:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-27 19:21:22 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-27 19:21:22 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-27 19:21:22 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-27 19:21:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-27 19:21:22 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-27 19:21:22 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-27 19:21:22 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Oct-27 19:21:22 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-27 19:21:22 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-27 19:21:22 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-27 19:21:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-27 19:21:22 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-27 19:21:22 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-27 19:21:22 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-27 19:21:23 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-27 19:21:23 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-27 19:21:23 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-27 19:21:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-27 19:21:23 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-27 19:21:23 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-27 19:21:23 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-27 19:21:23 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-27 19:21:23 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-27 19:21:23 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-27 19:21:23 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-27 19:21:23 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-27 19:21:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-27 19:21:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-27 19:21:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-27 19:21:23 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-27 19:21:23 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-27 19:21:23 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-27 19:21:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-27 19:21:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-27 19:21:23 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-27 19:21:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-27 19:21:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-27 19:21:23 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-27 19:21:23 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-27 19:21:23 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-27 19:21:23 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-27 19:21:23 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-27 19:21:23 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-27 19:21:23 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-27 19:21:23 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-27 19:21:24 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-27 19:21:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:21:24 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-27 19:21:24 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-27 19:21:24 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-27 19:21:24 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-27 19:21:24 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-27 19:21:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-27 19:21:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-27 19:21:24 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-27 19:21:24 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-27 19:21:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-27 19:21:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-27 19:21:39 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-27 19:21:39 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-27 19:21:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-27 19:21:39 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-27 19:21:39 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-27 19:21:39 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-27 19:21:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-27 19:21:39 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-27 19:21:39 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-27 19:21:39 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-27 19:21:39 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-27 19:21:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-27 19:21:39 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-27 19:21:39 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-27 19:21:39 START begin_task: Starting task 'selecting calibration port' 2008-Oct-27 19:21:39 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-27 19:21:39 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-27 19:21:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-27 19:21:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-27 19:21:40 START begin_task: Starting task 'waiting on calport' 2008-Oct-27 19:21:40 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-27 19:21:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:40 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-27 19:21:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-27 19:21:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-27 19:21:40 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-27 19:21:40 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-27 19:21:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-27 19:21:40 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-27 19:21:40 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-27 19:21:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-27 19:21:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-27 19:21:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-27 19:21:40 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-27 19:21:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-27 19:21:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-27 19:21:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-27 19:21:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-27 19:21:40 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-27 19:21:40 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-27 19:21:40 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-27 19:21:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-27 19:21:40 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-27 19:21:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-27 19:21:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-27 19:21:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-27 19:21:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-27 19:21:40 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-27 19:21:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-27 19:21:40 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-27 19:21:40 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-27 19:21:40 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-27 19:21:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-27 19:21:41 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-27 19:21:41 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-27 19:21:41 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-27 19:21:41 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-27 19:21:41 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-27 19:21:41 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-27 19:21:41 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-27 19:21:41 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-27 19:21:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-27 19:21:41 LOG3 track_source: Calling 'track_source galfasrc 212200.0 +095836 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-27 19:21:41 START begin_task: Starting task 'sending tracking commands' 2008-Oct-27 19:21:41 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-27 19:21:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-27 19:21:41 INFO1 track_source: Starting to track galfasrc 2008-Oct-27 19:21:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-27 19:21:41 LOG3 vw_send: To DATATAKING: set ra 212200.0 2008-Oct-27 19:21:41 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-27 19:21:41 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-27 19:21:41 LOG3 vw_send: To DATATAKING: pnt tr 212200.0 +095836 -CJ 2008-Oct-27 19:21:41 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-27 19:21:41 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-27 19:21:41 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-27 19:21:41 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-27 19:21:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-27 19:21:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-27 19:21:41 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-27 19:21:41 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-27 19:21:41 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-27 19:21:41 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-27 19:21:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-27 19:21:41 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-27 19:21:41 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-27 19:21:41 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-27 19:21:41 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-27 19:21:41 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-27 19:21:41 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-27 19:21:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-27 19:21:42 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-27 19:21:42 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-27 19:21:42 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-27 19:21:42 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-27 19:21:42 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-27 19:21:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-27 19:21:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20081027.a2010.0009.fits 2008-Oct-27 19:21:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-27 19:21:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-27 19:21:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-27 19:21:42 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081027.a2010.0009.fits} 2008-Oct-27 19:21:42 LOG4 got_cormsg: From DATATAKING: set ra 212200.0 2008-Oct-27 19:21:42 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-27 19:21:42 LOG4 got_cormsg: From DATATAKING: vw% 212200.0 2008-Oct-27 19:21:42 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-27 19:21:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-27 19:21:42 LOG4 got_cormsg: From DATATAKING: pnt tr 212200.0 +095836 -CJ 2008-Oct-27 19:21:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-27 19:21:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-27 19:21:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:21:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-27 19:21:42 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-27 19:21:42 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-27 19:21:42 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-27 19:21:42 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-27 19:21:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-27 19:21:42 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-27 19:21:42 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-27 19:21:42 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-27 19:21:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-27 19:21:42 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-27 19:21:42 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-27 19:21:43 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-27 19:21:43 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-27 19:21:43 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-27 19:21:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-27 19:21:43 LOG3 waittrk: Start waittrk 5 2008-Oct-27 19:21:43 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-27 19:21:43 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-27 19:21:48 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-27 19:21:48 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-27 19:21:48 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-27 19:21:48 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-27 19:22:32 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-27 19:22:32 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-27 19:22:32 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-27 19:22:32 INFO2 waittrk: Now tracking galfasrc 2008-Oct-27 19:22:32 LOG4 waittrk: Current telescope position: Az = 359.31 ZA = 8.30 2008-Oct-27 19:22:32 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-27 19:22:32 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-27 19:22:32 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-27 19:22:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-27 19:22:32 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-27 19:22:32 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-27 19:22:32 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-27 19:22:32 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-27 19:22:33 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-27 19:22:33 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-27 19:22:33 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-27 19:22:33 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-27 19:22:33 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-27 19:22:33 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-27 19:22:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-27 19:22:33 START begin_task: Starting task 'selecting calibration type' 2008-Oct-27 19:22:33 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-27 19:22:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-27 19:22:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-27 19:22:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-27 19:22:33 START begin_task: Starting task 'waiting on setcal' 2008-Oct-27 19:22:33 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-27 19:22:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-27 19:22:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-27 19:22:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:22:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-27 19:22:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-27 19:22:33 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-27 19:22:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-27 19:22:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-27 19:22:33 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-27 19:22:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-27 19:22:33 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-27 19:22:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:22:34 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-27 19:22:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-27 19:22:34 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-27 19:22:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-27 19:22:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-27 19:22:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-27 19:22:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-27 19:22:34 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-27 19:22:34 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-27 19:22:34 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-27 19:22:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-27 19:22:34 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-27 19:22:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-27 19:22:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-27 19:22:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-27 19:22:34 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-27 19:22:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-27 19:22:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-27 19:22:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-27 19:22:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-27 19:22:34 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081027.a2010.0009.fits' is empty! 2008-Oct-27 19:22:34 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-27 19:22:34 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-27 19:22:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-27 19:22:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-27 19:22:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-27 19:22:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-27 19:22:34 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-27 19:22:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-27 19:22:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-27 19:22:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-27 19:22:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-27 19:22:34 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-27 19:22:34 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-27 19:22:34 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-27 19:22:34 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-27 19:22:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-27 19:22:34 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-27 19:22:34 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-27 19:22:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-27 19:22:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-27 19:22:34 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-27 19:22:34 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-27 19:22:34 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-27 19:22:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-27 19:22:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-27 19:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:22:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-27 19:22:37 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-27 19:22:37 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-27 19:22:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-27 19:22:37 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-27 19:22:37 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-27 19:22:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-27 19:22:37 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-27 19:22:37 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-27 19:22:38 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-27 19:22:38 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-27 19:22:38 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-27 19:22:38 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-27 19:22:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-27 19:22:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:22:38 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-27 19:22:38 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2008-Oct-27 19:22:38 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2008-Oct-27 19:22:38 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Oct-27 19:22:38 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-27 19:22:38 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-27 19:22:38 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-27 19:22:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.058 0.982 ALFA beam 1: 0.957 0.931 2008-Oct-27 19:22:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.106 1.081 ALFA beam 3: 1.079 0.999 2008-Oct-27 19:22:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.900 0.994 ALFA beam 5: 0.941 1.012 2008-Oct-27 19:22:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.987 0.097 ALFA beam 7: 0.874 0.107 2008-Oct-27 19:22:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-27 19:22:38 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-27 19:22:38 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-27 19:22:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-27 19:22:38 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-27 19:22:38 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-27 19:22:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-27 19:22:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-27 19:22:38 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-27 19:22:38 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-27 19:22:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-27 19:22:38 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-27 19:22:38 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-27 19:22:38 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-27 19:22:38 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-27 19:22:38 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-27 19:22:38 LOG5 antvel: Calling 'antvel 212200.000000 95836.000000 J 0' 2008-Oct-27 19:22:38 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +09:58:36.0 Epoch = 2008.82630 J 2008-Oct-27 19:22:38 LOG2 antvel: Computed apparent RA = 21:22:26.6 Dec = +10:01:01.4 2008-Oct-27 19:22:38 LOG2 antvel: Parameters to Doppler: Topocentric 84158 2008 301 0.0 2008-Oct-27 19:22:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-27 19:22:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-27 19:22:38 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-27 19:22:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-27 19:22:38 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-27 19:22:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-27 19:22:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:22:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-27 19:22:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-27 19:22:38 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-27 19:22:38 LOG5 log_alfabeam: Parameters: 21.366666666666667 9.9766666666666666 21.372463 2008.8263035845564 18.999933 2008-Oct-27 19:22:38 LOG4 log_alfabeam: ALFABEAM 0 21.366666666664756 9.976666666666683 2008-Oct-27 19:22:38 LOG4 log_alfabeam: ALFABEAM 1 21.365487626147747 10.081361077995863 2008-Oct-27 19:22:38 LOG4 log_alfabeam: ALFABEAM 2 21.360835870506044 10.011670377160602 2008-Oct-27 19:22:38 LOG4 log_alfabeam: ALFABEAM 3 21.361967754010017 9.906838917730184 2008-Oct-27 19:22:38 LOG4 log_alfabeam: ALFABEAM 4 21.367874373377951 9.872008304889716 2008-Oct-27 19:22:38 LOG4 log_alfabeam: ALFABEAM 5 21.372544490717736 9.942530633051410 2008-Oct-27 19:22:38 LOG4 log_alfabeam: ALFABEAM 6 21.371289699585216 10.047044406066178 2008-Oct-27 19:22:38 INFO2 take_data: Starting WAPP+GALFA scan: 830100288 2008-Oct-27 19:22:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-27 19:22:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-27 19:22:39 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-27 19:22:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-27 19:22:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-27 19:22:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:22:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:22:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:22:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84160.00 2008-Oct-27 19:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-27 19:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1628.000000 MHz 2008-Oct-27 19:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1712.000000 MHz 2008-Oct-27 19:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1796.000000 MHz 2008-Oct-27 19:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Oct-27 19:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1670.000000 MHz 2008-Oct-27 19:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1754.000000 MHz 2008-Oct-27 19:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1838.000000 MHz 2008-Oct-27 19:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1922.000000 MHz 2008-Oct-27 19:22:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Oct-27 19:22:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.982 0.957 0.931 2008-Oct-27 19:22:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.106 1.081 1.079 0.999 2008-Oct-27 19:22:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.900 0.994 0.941 1.012 2008-Oct-27 19:22:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.097 0.874 0.107 2008-Oct-27 19:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-27 19:22:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-27 19:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.153 (still bad) 2008-Oct-27 19:22:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:22:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-27 19:22:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-27 19:22:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-27 19:22:50 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-27 19:22:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-27 19:22:50 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-27 19:22:50 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-27 19:22:50 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-27 19:22:50 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-27 19:22:50 LOG5 antvel: Calling 'antvel 212200.000000 95836.000000 J 0' 2008-Oct-27 19:22:50 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +09:58:36.0 Epoch = 2008.82630 J 2008-Oct-27 19:22:50 LOG2 antvel: Computed apparent RA = 21:22:26.6 Dec = +10:01:01.4 2008-Oct-27 19:22:50 LOG2 antvel: Parameters to Doppler: Topocentric 84170 2008 301 0.0 2008-Oct-27 19:22:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-27 19:22:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-27 19:22:50 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-27 19:22:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-27 19:22:50 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-27 19:22:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-27 19:22:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:22:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-27 19:22:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-27 19:22:50 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-27 19:22:50 LOG5 log_alfabeam: Parameters: 21.366666666666667 9.9766666666666666 21.375805 2008.8263039648134 18.999933 2008-Oct-27 19:22:50 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666777 9.976666666666667 2008-Oct-27 19:22:50 LOG4 log_alfabeam: ALFABEAM 1 21.365528235351199 10.081459092824252 2008-Oct-27 19:22:50 LOG4 log_alfabeam: ALFABEAM 2 21.360849529649798 10.012163011958199 2008-Oct-27 19:22:50 LOG4 log_alfabeam: ALFABEAM 3 21.361940770522320 9.907237528515452 2008-Oct-27 19:22:50 LOG4 log_alfabeam: ALFABEAM 4 21.367833803341099 9.871907863487227 2008-Oct-27 19:22:50 LOG4 log_alfabeam: ALFABEAM 5 21.372531160951020 9.942034003648581 2008-Oct-27 19:22:50 LOG4 log_alfabeam: ALFABEAM 6 21.371316903671701 10.046652202719510 2008-Oct-27 19:22:50 INFO2 take_data: Starting WAPP+GALFA scan: 830100289 2008-Oct-27 19:22:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-27 19:22:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-27 19:22:51 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-27 19:22:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-27 19:22:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-27 19:22:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:22:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:22:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.155 (still bad) 2008-Oct-27 19:22:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84172.00 2008-Oct-27 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-27 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1628.000000 MHz 2008-Oct-27 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1712.000000 MHz 2008-Oct-27 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1796.000000 MHz 2008-Oct-27 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Oct-27 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1670.000000 MHz 2008-Oct-27 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1754.000000 MHz 2008-Oct-27 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1838.000000 MHz 2008-Oct-27 19:22:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1922.000000 MHz 2008-Oct-27 19:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.155 (still bad) 2008-Oct-27 19:22:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:22:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-27 19:22:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:22:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:22:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:22:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-27 19:22:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-27 19:22:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-27 19:23:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-27 19:23:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-27 19:23:02 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-27 19:23:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-27 19:23:02 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-27 19:23:02 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-27 19:23:02 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-27 19:23:02 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-27 19:23:02 LOG5 antvel: Calling 'antvel 212200.000000 95836.000000 J 0' 2008-Oct-27 19:23:02 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +09:58:36.0 Epoch = 2008.82630 J 2008-Oct-27 19:23:02 LOG2 antvel: Computed apparent RA = 21:22:26.6 Dec = +10:01:01.4 2008-Oct-27 19:23:02 LOG2 antvel: Parameters to Doppler: Topocentric 84182 2008 301 0.0 2008-Oct-27 19:23:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-27 19:23:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-27 19:23:02 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-27 19:23:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-27 19:23:02 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-27 19:23:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-27 19:23:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:23:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-27 19:23:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-27 19:23:02 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-27 19:23:02 LOG5 log_alfabeam: Parameters: 21.366666666666667 9.9766666666666666 21.379148 2008.8263043450706 18.999933 2008-Oct-27 19:23:02 LOG4 log_alfabeam: ALFABEAM 0 21.366666666667005 9.976666666666665 2008-Oct-27 19:23:02 LOG4 log_alfabeam: ALFABEAM 1 21.365568891915483 10.081553694517011 2008-Oct-27 19:23:02 LOG4 log_alfabeam: ALFABEAM 2 21.360863382322972 10.012654595211588 2008-Oct-27 19:23:02 LOG4 log_alfabeam: ALFABEAM 3 21.361913936279119 9.907638509100879 2008-Oct-27 19:23:02 LOG4 log_alfabeam: ALFABEAM 4 21.367793184062094 9.871810830222369 2008-Oct-27 19:23:02 LOG4 log_alfabeam: ALFABEAM 5 21.372517634627592 9.941538366610395 2008-Oct-27 19:23:02 LOG4 log_alfabeam: ALFABEAM 6 21.371343963515933 10.046257592578781 2008-Oct-27 19:23:02 INFO2 take_data: Starting WAPP+GALFA scan: 830100290 2008-Oct-27 19:23:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-27 19:23:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-27 19:23:03 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-27 19:23:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-27 19:23:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-27 19:23:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:23:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:23:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:23:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84184.00 2008-Oct-27 19:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-27 19:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-27 19:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1628.000000 MHz 2008-Oct-27 19:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1712.000000 MHz 2008-Oct-27 19:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1796.000000 MHz 2008-Oct-27 19:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Oct-27 19:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1670.000000 MHz 2008-Oct-27 19:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1754.000000 MHz 2008-Oct-27 19:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1838.000000 MHz 2008-Oct-27 19:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1922.000000 MHz 2008-Oct-27 19:23:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-27 19:23:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-27 19:23:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-27 19:23:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-27 19:23:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-27 19:23:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:14 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2008-Oct-27 19:23:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-27 19:23:14 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-27 19:23:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-27 19:23:14 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-27 19:23:14 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-27 19:23:14 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-27 19:23:14 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-27 19:23:14 LOG5 antvel: Calling 'antvel 212200.000000 95836.000000 J 0' 2008-Oct-27 19:23:14 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +09:58:36.0 Epoch = 2008.82630 J 2008-Oct-27 19:23:14 LOG2 antvel: Computed apparent RA = 21:22:26.6 Dec = +10:01:01.4 2008-Oct-27 19:23:14 LOG2 antvel: Parameters to Doppler: Topocentric 84194 2008 301 0.0 2008-Oct-27 19:23:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-27 19:23:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-27 19:23:14 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-27 19:23:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-27 19:23:14 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-27 19:23:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-27 19:23:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:23:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-27 19:23:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-27 19:23:14 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-27 19:23:14 LOG5 log_alfabeam: Parameters: 21.366666666666667 9.9766666666666666 21.382490 2008.8263047253276 18.999933 2008-Oct-27 19:23:14 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666873 9.976666666666663 2008-Oct-27 19:23:14 LOG4 log_alfabeam: ALFABEAM 1 21.365609567380492 10.081644817755492 2008-Oct-27 19:23:14 LOG4 log_alfabeam: ALFABEAM 2 21.360877418769196 10.013144783305316 2008-Oct-27 19:23:14 LOG4 log_alfabeam: ALFABEAM 3 21.361887270015544 9.908041577975689 2008-Oct-27 19:23:14 LOG4 log_alfabeam: ALFABEAM 4 21.367752543981371 9.871717272367741 2008-Oct-27 19:23:14 LOG4 log_alfabeam: ALFABEAM 5 21.372503921235559 9.941044068821123 2008-Oct-27 19:23:14 LOG4 log_alfabeam: ALFABEAM 6 21.371370860202013 10.045860852046586 2008-Oct-27 19:23:14 INFO2 take_data: Starting WAPP+GALFA scan: 830100291 2008-Oct-27 19:23:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-27 19:23:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-27 19:23:15 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-27 19:23:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-27 19:23:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-27 19:23:15 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2008-Oct-27 19:23:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:23:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:23:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:23:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84196.00 2008-Oct-27 19:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-27 19:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-27 19:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1628.000000 MHz 2008-Oct-27 19:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1712.000000 MHz 2008-Oct-27 19:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1796.000000 MHz 2008-Oct-27 19:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Oct-27 19:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1670.000000 MHz 2008-Oct-27 19:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1754.000000 MHz 2008-Oct-27 19:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1838.000000 MHz 2008-Oct-27 19:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1922.000000 MHz 2008-Oct-27 19:23:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Oct-27 19:23:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Oct-27 19:23:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Oct-27 19:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Oct-27 19:23:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-27 19:23:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Oct-27 19:23:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-27 19:23:26 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-27 19:23:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-27 19:23:26 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-27 19:23:26 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-27 19:23:26 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-27 19:23:26 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-27 19:23:26 LOG5 antvel: Calling 'antvel 212200.000000 95836.000000 J 0' 2008-Oct-27 19:23:26 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +09:58:36.0 Epoch = 2008.82631 J 2008-Oct-27 19:23:26 LOG2 antvel: Computed apparent RA = 21:22:26.6 Dec = +10:01:01.4 2008-Oct-27 19:23:26 LOG2 antvel: Parameters to Doppler: Topocentric 84206 2008 301 0.0 2008-Oct-27 19:23:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-27 19:23:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-27 19:23:26 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-27 19:23:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-27 19:23:26 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-27 19:23:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-27 19:23:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:23:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-27 19:23:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-27 19:23:26 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-27 19:23:26 LOG5 log_alfabeam: Parameters: 21.366666666666667 9.9766666666666666 21.385833 2008.8263051055847 18.999933 2008-Oct-27 19:23:26 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666966 9.976666666666670 2008-Oct-27 19:23:26 LOG4 log_alfabeam: ALFABEAM 1 21.365650281933966 10.081732509414403 2008-Oct-27 19:23:26 LOG4 log_alfabeam: ALFABEAM 2 21.360891645862324 10.013633820454913 2008-Oct-27 19:23:26 LOG4 log_alfabeam: ALFABEAM 3 21.361860758406426 9.908446934052984 2008-Oct-27 19:23:26 LOG4 log_alfabeam: ALFABEAM 4 21.367711862925923 9.871627142092438 2008-Oct-27 19:23:26 LOG4 log_alfabeam: ALFABEAM 5 21.372490014035197 9.940550864472474 2008-Oct-27 19:23:26 LOG4 log_alfabeam: ALFABEAM 6 21.371397607141834 10.045461784716366 2008-Oct-27 19:23:26 INFO2 take_data: Starting WAPP+GALFA scan: 830100292 2008-Oct-27 19:23:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-27 19:23:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-27 19:23:27 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-27 19:23:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-27 19:23:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-27 19:23:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:23:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-27 19:23:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84208.00 2008-Oct-27 19:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Oct-27 19:23:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-27 19:23:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1628.000000 MHz 2008-Oct-27 19:23:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1712.000000 MHz 2008-Oct-27 19:23:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1796.000000 MHz 2008-Oct-27 19:23:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Oct-27 19:23:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1670.000000 MHz 2008-Oct-27 19:23:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1754.000000 MHz 2008-Oct-27 19:23:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1838.000000 MHz 2008-Oct-27 19:23:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1922.000000 MHz 2008-Oct-27 19:23:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Oct-27 19:23:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Oct-27 19:23:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Oct-27 19:23:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Oct-27 19:23:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-27 19:23:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-27 19:23:38 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-27 19:23:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-27 19:23:38 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-27 19:23:38 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-27 19:23:38 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-27 19:23:38 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-27 19:23:38 LOG5 antvel: Calling 'antvel 212200.000000 95836.000000 J 0' 2008-Oct-27 19:23:38 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +09:58:36.0 Epoch = 2008.82631 J 2008-Oct-27 19:23:38 LOG2 antvel: Computed apparent RA = 21:22:26.6 Dec = +10:01:01.4 2008-Oct-27 19:23:38 LOG2 antvel: Parameters to Doppler: Topocentric 84218 2008 301 0.0 2008-Oct-27 19:23:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-27 19:23:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-27 19:23:38 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-27 19:23:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-27 19:23:38 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-27 19:23:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-27 19:23:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:23:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-27 19:23:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-27 19:23:38 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-27 19:23:38 LOG5 log_alfabeam: Parameters: 21.366666666666667 9.9766666666666666 21.389175 2008.8263054858417 18.999933 2008-Oct-27 19:23:38 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666760 9.976666666666668 2008-Oct-27 19:23:38 LOG4 log_alfabeam: ALFABEAM 1 21.365691007058121 10.081816710446908 2008-Oct-27 19:23:38 LOG4 log_alfabeam: ALFABEAM 2 21.360906053508387 10.014121365399593 2008-Oct-27 19:23:38 LOG4 log_alfabeam: ALFABEAM 3 21.361834419892720 9.908854291894365 2008-Oct-27 19:23:38 LOG4 log_alfabeam: ALFABEAM 4 21.367671169387410 9.871540500403759 2008-Oct-27 19:23:38 LOG4 log_alfabeam: ALFABEAM 5 21.372475922863675 9.940059098206907 2008-Oct-27 19:23:38 LOG4 log_alfabeam: ALFABEAM 6 21.371424185703891 10.045060671001879 2008-Oct-27 19:23:38 INFO2 take_data: Starting WAPP+GALFA scan: 830100293 2008-Oct-27 19:23:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-27 19:23:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-27 19:23:39 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-27 19:23:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Oct-27 19:23:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-27 19:23:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-27 19:23:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:23:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:23:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:23:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84220.00 2008-Oct-27 19:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-27 19:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1628.000000 MHz 2008-Oct-27 19:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1712.000000 MHz 2008-Oct-27 19:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1796.000000 MHz 2008-Oct-27 19:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Oct-27 19:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1670.000000 MHz 2008-Oct-27 19:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1754.000000 MHz 2008-Oct-27 19:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1838.000000 MHz 2008-Oct-27 19:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1922.000000 MHz 2008-Oct-27 19:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Oct-27 19:23:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Oct-27 19:23:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.979 0.952 0.924 2008-Oct-27 19:23:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.106 1.102 1.093 1.016 2008-Oct-27 19:23:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 1.007 0.930 1.006 2008-Oct-27 19:23:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.098 0.882 0.109 2008-Oct-27 19:23:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Oct-27 19:23:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Oct-27 19:23:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Oct-27 19:23:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-27 19:23:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-27 19:23:50 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-27 19:23:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-27 19:23:50 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-27 19:23:50 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-27 19:23:50 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-27 19:23:50 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-27 19:23:50 LOG5 antvel: Calling 'antvel 212200.000000 95836.000000 J 0' 2008-Oct-27 19:23:50 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +09:58:36.0 Epoch = 2008.82631 J 2008-Oct-27 19:23:50 LOG2 antvel: Computed apparent RA = 21:22:26.6 Dec = +10:01:01.4 2008-Oct-27 19:23:50 LOG2 antvel: Parameters to Doppler: Topocentric 84230 2008 301 0.0 2008-Oct-27 19:23:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-27 19:23:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-27 19:23:50 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-27 19:23:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-27 19:23:50 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-27 19:23:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-27 19:23:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:23:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-27 19:23:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-27 19:23:50 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-27 19:23:50 LOG5 log_alfabeam: Parameters: 21.366666666666667 9.9766666666666666 21.392517 2008.8263058660987 18.999933 2008-Oct-27 19:23:50 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666770 9.976666666666665 2008-Oct-27 19:23:50 LOG4 log_alfabeam: ALFABEAM 1 21.365731750766479 10.081897442092085 2008-Oct-27 19:23:50 LOG4 log_alfabeam: ALFABEAM 2 21.360920644298158 10.014607516400323 2008-Oct-27 19:23:50 LOG4 log_alfabeam: ALFABEAM 3 21.361808249046060 9.909263728894636 2008-Oct-27 19:23:50 LOG4 log_alfabeam: ALFABEAM 4 21.367630455358398 9.871457325835742 2008-Oct-27 19:23:50 LOG4 log_alfabeam: ALFABEAM 5 21.372461645164130 9.939568671435390 2008-Oct-27 19:23:50 LOG4 log_alfabeam: ALFABEAM 6 21.371450601332736 10.044657434152329 2008-Oct-27 19:23:50 INFO2 take_data: Starting WAPP+GALFA scan: 830100294 2008-Oct-27 19:23:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-27 19:23:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-27 19:23:51 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-27 19:23:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-27 19:23:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-27 19:23:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:23:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:23:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Oct-27 19:23:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84232.00 2008-Oct-27 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-27 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1628.000000 MHz 2008-Oct-27 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1712.000000 MHz 2008-Oct-27 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1796.000000 MHz 2008-Oct-27 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Oct-27 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1670.000000 MHz 2008-Oct-27 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1754.000000 MHz 2008-Oct-27 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1838.000000 MHz 2008-Oct-27 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1922.000000 MHz 2008-Oct-27 19:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2008-Oct-27 19:23:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Oct-27 19:23:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Oct-27 19:23:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:23:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:23:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Oct-27 19:24:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:24:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:24:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Oct-27 19:24:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-27 19:24:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-27 19:24:02 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-27 19:24:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-27 19:24:02 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-27 19:24:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-27 19:24:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-27 19:24:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-27 19:24:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-27 19:24:02 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-27 19:24:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-27 19:24:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:24:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-27 19:24:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-27 19:24:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-27 19:24:02 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-27 19:24:02 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-27 19:24:02 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-27 19:24:02 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-27 19:24:02 LOG5 antvel: Calling 'antvel 212200.000000 95836.000000 J 0' 2008-Oct-27 19:24:02 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +09:58:36.0 Epoch = 2008.82631 J 2008-Oct-27 19:24:02 LOG2 antvel: Computed apparent RA = 21:22:26.6 Dec = +10:01:01.4 2008-Oct-27 19:24:02 LOG2 antvel: Parameters to Doppler: Topocentric 84242 2008 301 0.0 2008-Oct-27 19:24:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-27 19:24:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-27 19:24:02 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-27 19:24:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-27 19:24:02 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-27 19:24:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-27 19:24:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:24:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-27 19:24:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-27 19:24:02 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-27 19:24:02 LOG5 log_alfabeam: Parameters: 21.366666666666667 9.9766666666666666 21.395860 2008.8263062463559 18.999933 2008-Oct-27 19:24:02 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666688 9.976666666666665 2008-Oct-27 19:24:02 LOG4 log_alfabeam: ALFABEAM 1 21.365772521092651 10.081974722510354 2008-Oct-27 19:24:02 LOG4 log_alfabeam: ALFABEAM 2 21.360935420987065 10.015092370525611 2008-Oct-27 19:24:02 LOG4 log_alfabeam: ALFABEAM 3 21.361782240584368 9.909675324338911 2008-Oct-27 19:24:02 LOG4 log_alfabeam: ALFABEAM 4 21.367589712809945 9.871377599998533 2008-Oct-27 19:24:02 LOG4 log_alfabeam: ALFABEAM 5 21.372447178213452 9.939079486717004 2008-Oct-27 19:24:02 LOG4 log_alfabeam: ALFABEAM 6 21.371476859331455 10.044251995493346 2008-Oct-27 19:24:02 INFO2 take_data: Starting WAPP+GALFA scan: 830100295 2008-Oct-27 19:24:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-27 19:24:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-27 19:24:03 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-27 19:24:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-27 19:24:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-27 19:24:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:24:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:24:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:24:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84244.00 2008-Oct-27 19:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Oct-27 19:24:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-27 19:24:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1628.000000 MHz 2008-Oct-27 19:24:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1712.000000 MHz 2008-Oct-27 19:24:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1796.000000 MHz 2008-Oct-27 19:24:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Oct-27 19:24:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1670.000000 MHz 2008-Oct-27 19:24:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1754.000000 MHz 2008-Oct-27 19:24:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1838.000000 MHz 2008-Oct-27 19:24:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1922.000000 MHz 2008-Oct-27 19:24:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.593 (still bad) 2008-Oct-27 19:24:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.590 (still bad) 2008-Oct-27 19:24:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:24:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.593 (still bad) 2008-Oct-27 19:24:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:24:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.596 (still bad) 2008-Oct-27 19:24:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.593 (still bad) 2008-Oct-27 19:24:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-27 19:24:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-27 19:24:14 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-27 19:24:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-27 19:24:14 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-27 19:24:14 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-27 19:24:14 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-27 19:24:14 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-27 19:24:14 LOG5 antvel: Calling 'antvel 212200.000000 95836.000000 J 0' 2008-Oct-27 19:24:14 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +09:58:36.0 Epoch = 2008.82631 J 2008-Oct-27 19:24:14 LOG2 antvel: Computed apparent RA = 21:22:26.6 Dec = +10:01:01.4 2008-Oct-27 19:24:14 LOG2 antvel: Parameters to Doppler: Topocentric 84254 2008 301 0.0 2008-Oct-27 19:24:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-27 19:24:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-27 19:24:14 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-27 19:24:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-27 19:24:14 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-27 19:24:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-27 19:24:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:24:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-27 19:24:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-27 19:24:14 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-27 19:24:14 LOG5 log_alfabeam: Parameters: 21.366666666666667 9.9766666666666666 21.399202 2008.8263066266129 18.999933 2008-Oct-27 19:24:14 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666720 9.976666666666667 2008-Oct-27 19:24:14 LOG4 log_alfabeam: ALFABEAM 1 21.365813289480425 10.082048502104135 2008-Oct-27 19:24:14 LOG4 log_alfabeam: ALFABEAM 2 21.360950372987688 10.015575590445197 2008-Oct-27 19:24:14 LOG4 log_alfabeam: ALFABEAM 3 21.361756412484670 9.910088787262007 2008-Oct-27 19:24:14 LOG4 log_alfabeam: ALFABEAM 4 21.367548970277468 9.871301374455154 2008-Oct-27 19:24:14 LOG4 log_alfabeam: ALFABEAM 5 21.372432532354100 9.938591884924458 2008-Oct-27 19:24:14 LOG4 log_alfabeam: ALFABEAM 6 21.371502941516201 10.043844641102629 2008-Oct-27 19:24:14 INFO2 take_data: Starting WAPP+GALFA scan: 830100296 2008-Oct-27 19:24:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-27 19:24:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-27 19:24:15 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-27 19:24:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-27 19:24:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-27 19:24:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:24:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84256.00 2008-Oct-27 19:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.590 (still bad) 2008-Oct-27 19:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-27 19:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1628.000000 MHz 2008-Oct-27 19:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1712.000000 MHz 2008-Oct-27 19:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1796.000000 MHz 2008-Oct-27 19:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Oct-27 19:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1670.000000 MHz 2008-Oct-27 19:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1754.000000 MHz 2008-Oct-27 19:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1838.000000 MHz 2008-Oct-27 19:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1922.000000 MHz 2008-Oct-27 19:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.571 (still bad) 2008-Oct-27 19:24:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:24:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.573 (still bad) 2008-Oct-27 19:24:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.575 (still bad) 2008-Oct-27 19:24:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.575 (still bad) 2008-Oct-27 19:24:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:24:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:24:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-27 19:24:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-27 19:24:26 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-27 19:24:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-27 19:24:26 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-27 19:24:26 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-27 19:24:26 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-27 19:24:26 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-27 19:24:26 LOG5 antvel: Calling 'antvel 212200.000000 95836.000000 J 0' 2008-Oct-27 19:24:26 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +09:58:36.0 Epoch = 2008.82631 J 2008-Oct-27 19:24:26 LOG2 antvel: Computed apparent RA = 21:22:26.6 Dec = +10:01:01.4 2008-Oct-27 19:24:26 LOG2 antvel: Parameters to Doppler: Topocentric 84266 2008 301 0.0 2008-Oct-27 19:24:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-27 19:24:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-27 19:24:26 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-27 19:24:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-27 19:24:26 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-27 19:24:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-27 19:24:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:24:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-27 19:24:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-27 19:24:26 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-27 19:24:26 LOG5 log_alfabeam: Parameters: 21.366666666666667 9.9766666666666666 21.402545 2008.8263070068699 18.999933 2008-Oct-27 19:24:26 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666738 9.976666666666665 2008-Oct-27 19:24:26 LOG4 log_alfabeam: ALFABEAM 1 21.365854076163515 10.082118822735810 2008-Oct-27 19:24:26 LOG4 log_alfabeam: ALFABEAM 2 21.360965507448611 10.016057418583870 2008-Oct-27 19:24:26 LOG4 log_alfabeam: ALFABEAM 3 21.361730751652726 9.910504319807565 2008-Oct-27 19:24:26 LOG4 log_alfabeam: ALFABEAM 4 21.367508207540862 9.871228606381900 2008-Oct-27 19:24:26 LOG4 log_alfabeam: ALFABEAM 5 21.372417700563201 9.938105621982318 2008-Oct-27 19:24:26 LOG4 log_alfabeam: ALFABEAM 6 21.371528861075475 10.043435171308627 2008-Oct-27 19:24:26 INFO2 take_data: Starting WAPP+GALFA scan: 830100297 2008-Oct-27 19:24:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-27 19:24:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-27 19:24:27 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-27 19:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.573 (still bad) 2008-Oct-27 19:24:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-27 19:24:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-27 19:24:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-27 19:24:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:24:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-27 19:24:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84268.00 2008-Oct-27 19:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-27 19:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1628.000000 MHz 2008-Oct-27 19:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1712.000000 MHz 2008-Oct-27 19:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1796.000000 MHz 2008-Oct-27 19:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2008-Oct-27 19:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1670.000000 MHz 2008-Oct-27 19:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1754.000000 MHz 2008-Oct-27 19:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1838.000000 MHz 2008-Oct-27 19:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.575 (still bad) 2008-Oct-27 19:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1922.000000 MHz 2008-Oct-27 19:24:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:24:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:24:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.568 (still bad) 2008-Oct-27 19:24:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:24:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-27 19:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.569 (still bad) 2008-Oct-27 19:24:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-27 19:24:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.571 (still bad) 2008-Oct-27 19:24:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.569 (still bad) 2008-Oct-27 19:24:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-27 19:24:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-27 19:24:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-27 19:24:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-27 19:24:38 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-27 19:24:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-27 19:24:38 LOG5 end_task: Level: (3) ID = <10050>