2008-Oct-25 19:26:32 BEGIN executive: CIMA executive starting ... 2008-Oct-25 19:26:33 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-25 19:26:33 INFO1 executive: Using CIMA version 3.0.06 'next' from 2008-10-24 20:28 2008-Oct-25 19:26:33 INFO4 executive: This is an ON-LINE session 2008-Oct-25 19:26:33 INFO4 executive: This is a LOCAL session 2008-Oct-25 19:26:33 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-25 19:26:33 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'CA and KS' 2008-Oct-25 19:26:33 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081025' 2008-Oct-25 19:26:33 LOG2 log_preferences: Currently applied preferences: 2008-Oct-25 19:26:33 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-25 19:26:33 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-25 19:26:33 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-25 19:26:33 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-25 19:26:33 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-25 19:26:33 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-25 19:26:33 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-25 19:26:33 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-25 19:26:33 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-25 19:26:33 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-25 19:26:33 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-25 19:26:33 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-25 19:26:33 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-25 19:26:33 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-25 19:26:33 ALERT executive: CIMA executive ready 2008-Oct-25 19:26:35 NOTE frontend: CIMA frontend ready 2008-Oct-25 19:26:36 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2008-Oct-25 19:26:36 LOG4 got_cormsg: From DATATAKING: vw% setup 2008-Oct-25 19:26:38 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-25 19:26:38 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-25 19:26:38 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-25 19:26:38 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-25 19:26:38 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-25 19:26:38 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-25 19:26:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-25 19:26:38 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-25 19:26:39 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-25 19:26:39 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-25 19:26:39 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-25 19:26:39 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-25 19:26:39 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-25 19:26:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-25 19:26:39 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-25 19:26:39 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-25 19:26:42 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-25 19:26:42 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-25 19:26:42 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-25 19:26:42 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-25 19:26:43 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-25 19:26:43 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-25 19:26:43 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-25 19:26:43 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-25 19:26:43 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-25 19:26:43 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Oct-25 19:26:44 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-25 19:26:44 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:26:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:26:46 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-25 19:26:46 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-25 19:26:46 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-25 19:26:46 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-25 19:26:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:26:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:26:56 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-25 19:27:04 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-25 19:27:05 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-25 19:27:05 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-25 19:27:05 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-25 19:27:05 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-25 19:27:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-25 19:27:05 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-25 19:27:05 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-25 19:27:05 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-25 19:27:05 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-25 19:27:05 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-25 19:27:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-25 19:27:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-25 19:27:07 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-25 19:27:07 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-25 19:27:07 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-25 19:27:07 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-25 19:27:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-25 19:27:07 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-25 19:27:07 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-25 19:27:07 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Oct-25 19:27:07 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-25 19:27:07 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-25 19:27:07 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-25 19:27:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-25 19:27:07 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-25 19:27:07 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-25 19:27:07 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-25 19:27:07 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-25 19:27:07 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-25 19:27:07 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-25 19:27:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-25 19:27:07 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-25 19:27:07 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-25 19:27:07 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-25 19:27:07 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-25 19:27:07 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-25 19:27:07 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-25 19:27:07 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-25 19:27:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-25 19:27:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-25 19:27:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-25 19:27:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-25 19:27:07 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-25 19:27:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-25 19:27:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-25 19:27:07 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-25 19:27:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-25 19:27:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-25 19:27:07 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-25 19:27:07 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-25 19:27:08 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-25 19:27:08 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-25 19:27:08 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-25 19:27:08 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-25 19:27:08 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-25 19:27:08 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-25 19:27:08 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-25 19:27:08 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-25 19:27:08 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-25 19:27:08 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-25 19:27:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-25 19:27:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-25 19:27:08 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-25 19:27:08 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-25 19:27:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-25 19:27:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-25 19:27:23 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-25 19:27:23 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-25 19:27:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-25 19:27:23 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-25 19:27:23 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-25 19:27:23 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-25 19:27:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-25 19:27:23 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-25 19:27:23 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-25 19:27:23 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-25 19:27:23 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-25 19:27:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-25 19:27:24 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-25 19:27:24 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-25 19:27:24 START begin_task: Starting task 'selecting calibration port' 2008-Oct-25 19:27:24 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-25 19:27:24 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-25 19:27:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-25 19:27:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-25 19:27:24 START begin_task: Starting task 'waiting on calport' 2008-Oct-25 19:27:24 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-25 19:27:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:24 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-25 19:27:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-25 19:27:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-25 19:27:24 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-25 19:27:24 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-25 19:27:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-25 19:27:24 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-25 19:27:24 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-25 19:27:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-25 19:27:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-25 19:27:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-25 19:27:24 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-25 19:27:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-25 19:27:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-25 19:27:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-25 19:27:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-25 19:27:24 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-25 19:27:24 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-25 19:27:24 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-25 19:27:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-25 19:27:24 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-25 19:27:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-25 19:27:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-25 19:27:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-25 19:27:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-25 19:27:24 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-25 19:27:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-25 19:27:25 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-25 19:27:25 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-25 19:27:25 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-25 19:27:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-25 19:27:25 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-25 19:27:25 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-25 19:27:25 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-25 19:27:25 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-25 19:27:25 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-25 19:27:25 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-25 19:27:25 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-25 19:27:25 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-25 19:27:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-25 19:27:25 LOG3 track_source: Calling 'track_source galfasrc 212100.0 +083100 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-25 19:27:25 START begin_task: Starting task 'sending tracking commands' 2008-Oct-25 19:27:25 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-25 19:27:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-25 19:27:25 INFO1 track_source: Starting to track galfasrc 2008-Oct-25 19:27:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-25 19:27:25 LOG3 vw_send: To DATATAKING: set ra 212100.0 2008-Oct-25 19:27:25 LOG3 vw_send: To DATATAKING: set dec +083100 2008-Oct-25 19:27:25 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-25 19:27:25 LOG3 vw_send: To DATATAKING: pnt tr 212100.0 +083100 -CJ 2008-Oct-25 19:27:25 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-25 19:27:25 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-25 19:27:25 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-25 19:27:25 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-25 19:27:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-25 19:27:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-25 19:27:25 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-25 19:27:25 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-25 19:27:25 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-25 19:27:25 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-25 19:27:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-25 19:27:25 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-25 19:27:25 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-25 19:27:25 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-25 19:27:26 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-25 19:27:26 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-25 19:27:26 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-25 19:27:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-25 19:27:26 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-25 19:27:26 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-25 19:27:26 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-25 19:27:26 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-25 19:27:26 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-25 19:27:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-25 19:27:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20081025.a2010.0010.fits 2008-Oct-25 19:27:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-25 19:27:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-25 19:27:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-25 19:27:26 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081025.a2010.0010.fits} 2008-Oct-25 19:27:26 LOG4 got_cormsg: From DATATAKING: set ra 212100.0 2008-Oct-25 19:27:26 LOG4 got_cormsg: From DATATAKING: set dec +083100 2008-Oct-25 19:27:26 LOG4 got_cormsg: From DATATAKING: vw% 212100.0 2008-Oct-25 19:27:26 LOG4 got_cormsg: From DATATAKING: vw% +083100 2008-Oct-25 19:27:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-25 19:27:26 LOG4 got_cormsg: From DATATAKING: pnt tr 212100.0 +083100 -CJ 2008-Oct-25 19:27:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-25 19:27:26 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-25 19:27:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:27:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-25 19:27:39 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-25 19:27:39 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-25 19:27:39 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-25 19:27:39 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-25 19:27:39 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-25 19:27:39 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-25 19:27:39 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-25 19:27:39 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-25 19:27:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-25 19:27:39 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-25 19:27:39 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-25 19:27:39 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-25 19:27:39 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-25 19:27:39 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-25 19:27:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-25 19:27:39 LOG3 waittrk: Start waittrk 5 2008-Oct-25 19:27:39 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-25 19:27:39 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-25 19:27:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-25 19:27:44 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-25 19:27:44 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-25 19:27:44 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-25 19:28:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-25 19:28:05 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-25 19:28:05 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-25 19:28:05 INFO2 waittrk: Now tracking galfasrc 2008-Oct-25 19:28:05 LOG4 waittrk: Current telescope position: Az = 357.45 ZA = 9.77 2008-Oct-25 19:28:05 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-25 19:28:05 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-25 19:28:05 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-25 19:28:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-25 19:28:05 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-25 19:28:05 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-25 19:28:06 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-25 19:28:06 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-25 19:28:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-25 19:28:06 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-25 19:28:06 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-25 19:28:06 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-25 19:28:06 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-25 19:28:06 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-25 19:28:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-25 19:28:06 START begin_task: Starting task 'selecting calibration type' 2008-Oct-25 19:28:06 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-25 19:28:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-25 19:28:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-25 19:28:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-25 19:28:06 START begin_task: Starting task 'waiting on setcal' 2008-Oct-25 19:28:06 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-25 19:28:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-25 19:28:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-25 19:28:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:28:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-25 19:28:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-25 19:28:06 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-25 19:28:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-25 19:28:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-25 19:28:06 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-25 19:28:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-25 19:28:06 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-25 19:28:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:28:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-25 19:28:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-25 19:28:07 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-25 19:28:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-25 19:28:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-25 19:28:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-25 19:28:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-25 19:28:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-25 19:28:07 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-25 19:28:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-25 19:28:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-25 19:28:07 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-25 19:28:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-25 19:28:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-25 19:28:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-25 19:28:07 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-25 19:28:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-25 19:28:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-25 19:28:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-25 19:28:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-25 19:28:07 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081025.a2010.0010.fits' is empty! 2008-Oct-25 19:28:07 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-25 19:28:07 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-25 19:28:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-25 19:28:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-25 19:28:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-25 19:28:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-25 19:28:07 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-25 19:28:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-25 19:28:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-25 19:28:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-25 19:28:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-25 19:28:08 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-25 19:28:08 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-25 19:28:08 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-25 19:28:08 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-25 19:28:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-25 19:28:08 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-25 19:28:08 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-25 19:28:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-25 19:28:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-25 19:28:08 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-25 19:28:08 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-25 19:28:08 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-25 19:28:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-25 19:28:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-25 19:28:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:28:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-25 19:28:11 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-25 19:28:11 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-25 19:28:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-25 19:28:11 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-25 19:28:11 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-25 19:28:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-25 19:28:11 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-25 19:28:11 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-25 19:28:11 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-25 19:28:11 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-25 19:28:11 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-25 19:28:11 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-25 19:28:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-25 19:28:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:28:12 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-25 19:28:12 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 3 2 dB 2008-Oct-25 19:28:12 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2008-Oct-25 19:28:12 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Oct-25 19:28:12 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-25 19:28:12 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-25 19:28:12 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-25 19:28:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.057 0.994 ALFA beam 1: 0.976 0.915 2008-Oct-25 19:28:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.899 1.105 ALFA beam 3: 0.882 1.013 2008-Oct-25 19:28:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.892 1.009 ALFA beam 5: 0.944 1.020 2008-Oct-25 19:28:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.031 0.095 ALFA beam 7: 0.912 0.105 2008-Oct-25 19:28:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-25 19:28:12 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-25 19:28:12 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-25 19:28:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-25 19:28:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-25 19:28:12 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-25 19:28:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-25 19:28:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-25 19:28:12 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-25 19:28:12 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-25 19:28:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-25 19:28:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-25 19:28:12 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-25 19:28:12 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-25 19:28:12 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-25 19:28:12 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-25 19:28:12 LOG5 antvel: Calling 'antvel 212100.000000 83100.000000 J 0' 2008-Oct-25 19:28:12 LOG2 antvel: Precessing RA = 21:21:00.0 Dec = +08:31:00.0 Epoch = 2008.82084 J 2008-Oct-25 19:28:12 LOG2 antvel: Computed apparent RA = 21:21:26.9 Dec = +08:33:24.5 2008-Oct-25 19:28:12 LOG2 antvel: Parameters to Doppler: Topocentric 84491 2008 299 0.0 2008-Oct-25 19:28:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-25 19:28:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-25 19:28:12 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-25 19:28:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-25 19:28:12 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-25 19:28:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-25 19:28:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:28:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-25 19:28:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-25 19:28:12 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-25 19:28:12 LOG5 log_alfabeam: Parameters: 21.350000000000001 8.5166666666666675 21.333797 2008.8208384351155 18.999933 2008-Oct-25 19:28:12 LOG4 log_alfabeam: ALFABEAM 0 21.349999999999948 8.516666666666669 2008-Oct-25 19:28:12 LOG4 log_alfabeam: ALFABEAM 1 21.348599641905881 8.620750095035966 2008-Oct-25 19:28:12 LOG4 log_alfabeam: ALFABEAM 2 21.344117773313801 8.548844598855691 2008-Oct-25 19:28:12 LOG4 log_alfabeam: ALFABEAM 3 21.345478488838523 8.444625696357607 2008-Oct-25 19:28:12 LOG4 log_alfabeam: ALFABEAM 4 21.351424370662347 8.412625195543775 2008-Oct-25 19:28:12 LOG4 log_alfabeam: ALFABEAM 5 21.355920376575117 8.485242976015641 2008-Oct-25 19:28:12 LOG4 log_alfabeam: ALFABEAM 6 21.354456426389532 8.589143577782751 2008-Oct-25 19:28:12 INFO2 take_data: Starting WAPP+GALFA scan: 829900114 2008-Oct-25 19:28:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-25 19:28:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-25 19:28:13 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-25 19:28:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-25 19:28:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-25 19:28:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:28:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:28:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:28:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84494.00 2008-Oct-25 19:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-25 19:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-25 19:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Oct-25 19:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Oct-25 19:28:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Oct-25 19:28:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 1.025 1.009 0.938 2008-Oct-25 19:28:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 1.156 0.942 1.054 2008-Oct-25 19:28:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.940 1.051 1.010 1.061 2008-Oct-25 19:28:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.097 0.933 0.108 2008-Oct-25 19:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.154 (still bad) 2008-Oct-25 19:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.151 (still bad) 2008-Oct-25 19:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.153 (still bad) 2008-Oct-25 19:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.152 (still bad) 2008-Oct-25 19:28:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-25 19:28:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-25 19:28:24 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-25 19:28:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-25 19:28:24 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-25 19:28:24 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-25 19:28:24 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-25 19:28:24 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-25 19:28:24 LOG5 antvel: Calling 'antvel 212100.000000 83100.000000 J 0' 2008-Oct-25 19:28:24 LOG2 antvel: Precessing RA = 21:21:00.0 Dec = +08:31:00.0 Epoch = 2008.82084 J 2008-Oct-25 19:28:24 LOG2 antvel: Computed apparent RA = 21:21:26.9 Dec = +08:33:24.5 2008-Oct-25 19:28:24 LOG2 antvel: Parameters to Doppler: Topocentric 84504 2008 299 0.0 2008-Oct-25 19:28:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-25 19:28:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-25 19:28:24 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-25 19:28:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-25 19:28:24 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-25 19:28:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-25 19:28:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:28:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-25 19:28:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-25 19:28:24 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-25 19:28:24 LOG5 log_alfabeam: Parameters: 21.350000000000001 8.5166666666666675 21.337418 2008.8208388470607 18.999933 2008-Oct-25 19:28:24 LOG4 log_alfabeam: ALFABEAM 0 21.349999999999916 8.516666666666667 2008-Oct-25 19:28:24 LOG4 log_alfabeam: ALFABEAM 1 21.348636725752240 8.620858350939130 2008-Oct-25 19:28:24 LOG4 log_alfabeam: ALFABEAM 2 21.344129311142844 8.549305031287300 2008-Oct-25 19:28:24 LOG4 log_alfabeam: ALFABEAM 3 21.345452903188320 8.444980956421976 2008-Oct-25 19:28:24 LOG4 log_alfabeam: ALFABEAM 4 21.351387325560996 8.412515064389737 2008-Oct-25 19:28:24 LOG4 log_alfabeam: ALFABEAM 5 21.355909108449417 8.484779680499912 2008-Oct-25 19:28:24 LOG4 log_alfabeam: ALFABEAM 6 21.354482161917137 8.588793489938414 2008-Oct-25 19:28:24 INFO2 take_data: Starting WAPP+GALFA scan: 829900115 2008-Oct-25 19:28:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-25 19:28:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-25 19:28:25 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-25 19:28:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-25 19:28:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-25 19:28:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:28:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:28:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.152 (still bad) 2008-Oct-25 19:28:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84506.00 2008-Oct-25 19:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-25 19:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-25 19:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Oct-25 19:28:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Oct-25 19:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Oct-25 19:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Oct-25 19:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Oct-25 19:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Oct-25 19:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Oct-25 19:28:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-25 19:28:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-25 19:28:36 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-25 19:28:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-25 19:28:36 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-25 19:28:36 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-25 19:28:36 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-25 19:28:36 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-25 19:28:36 LOG5 antvel: Calling 'antvel 212100.000000 83100.000000 J 0' 2008-Oct-25 19:28:36 LOG2 antvel: Precessing RA = 21:21:00.0 Dec = +08:31:00.0 Epoch = 2008.82084 J 2008-Oct-25 19:28:36 LOG2 antvel: Computed apparent RA = 21:21:26.9 Dec = +08:33:24.5 2008-Oct-25 19:28:36 LOG2 antvel: Parameters to Doppler: Topocentric 84516 2008 299 0.0 2008-Oct-25 19:28:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-25 19:28:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-25 19:28:36 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-25 19:28:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-25 19:28:36 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-25 19:28:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-25 19:28:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:28:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-25 19:28:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-25 19:28:36 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-25 19:28:36 LOG5 log_alfabeam: Parameters: 21.350000000000001 8.5166666666666675 21.340760 2008.8208392273177 18.999933 2008-Oct-25 19:28:36 LOG4 log_alfabeam: ALFABEAM 0 21.349999999999870 8.516666666666666 2008-Oct-25 19:28:36 LOG4 log_alfabeam: ALFABEAM 1 21.348670996415681 8.620955715672102 2008-Oct-25 19:28:36 LOG4 log_alfabeam: ALFABEAM 2 21.344140108211128 8.549729301468600 2008-Oct-25 19:28:36 LOG4 log_alfabeam: ALFABEAM 3 21.345429394964082 8.445310715332800 2008-Oct-25 19:28:36 LOG4 log_alfabeam: ALFABEAM 4 21.351353089483048 8.412415964346046 2008-Oct-25 19:28:36 LOG4 log_alfabeam: ALFABEAM 5 21.355898558551022 8.484352727683124 2008-Oct-25 19:28:36 LOG4 log_alfabeam: ALFABEAM 6 21.354505811785803 8.588468484566924 2008-Oct-25 19:28:36 INFO2 take_data: Starting WAPP+GALFA scan: 829900116 2008-Oct-25 19:28:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-25 19:28:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-25 19:28:37 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-25 19:28:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-25 19:28:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-25 19:28:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:28:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:28:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:28:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84518.00 2008-Oct-25 19:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Oct-25 19:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-25 19:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-25 19:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Oct-25 19:28:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Oct-25 19:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Oct-25 19:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Oct-25 19:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.135 (still bad) 2008-Oct-25 19:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.135 (still bad) 2008-Oct-25 19:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.133 (still bad) 2008-Oct-25 19:28:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-25 19:28:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-25 19:28:48 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-25 19:28:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-25 19:28:48 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-25 19:28:48 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-25 19:28:48 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-25 19:28:48 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-25 19:28:48 LOG5 antvel: Calling 'antvel 212100.000000 83100.000000 J 0' 2008-Oct-25 19:28:48 LOG2 antvel: Precessing RA = 21:21:00.0 Dec = +08:31:00.0 Epoch = 2008.82084 J 2008-Oct-25 19:28:48 LOG2 antvel: Computed apparent RA = 21:21:26.9 Dec = +08:33:24.5 2008-Oct-25 19:28:48 LOG2 antvel: Parameters to Doppler: Topocentric 84528 2008 299 0.0 2008-Oct-25 19:28:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-25 19:28:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-25 19:28:48 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-25 19:28:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-25 19:28:48 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-25 19:28:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-25 19:28:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:28:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-25 19:28:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-25 19:28:48 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-25 19:28:48 LOG5 log_alfabeam: Parameters: 21.350000000000001 8.5166666666666675 21.344103 2008.8208396075747 18.999933 2008-Oct-25 19:28:48 LOG4 log_alfabeam: ALFABEAM 0 21.349999999999934 8.516666666666667 2008-Oct-25 19:28:48 LOG4 log_alfabeam: ALFABEAM 1 21.348705317153623 8.621050651195363 2008-Oct-25 19:28:48 LOG4 log_alfabeam: ALFABEAM 2 21.344151050157766 8.550153007304116 2008-Oct-25 19:28:48 LOG4 log_alfabeam: ALFABEAM 3 21.345405983413507 8.445642346744769 2008-Oct-25 19:28:48 LOG4 log_alfabeam: ALFABEAM 4 21.351318802207825 8.412319288887689 2008-Oct-25 19:28:48 LOG4 log_alfabeam: ALFABEAM 5 21.355887862126142 8.483926300228569 2008-Oct-25 19:28:48 LOG4 log_alfabeam: ALFABEAM 6 21.354529368188942 8.588141588009854 2008-Oct-25 19:28:48 INFO2 take_data: Starting WAPP+GALFA scan: 829900117 2008-Oct-25 19:28:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-25 19:28:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-25 19:28:49 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-25 19:28:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-25 19:28:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-25 19:28:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:28:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:28:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:28:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84530.00 2008-Oct-25 19:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Oct-25 19:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-25 19:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-25 19:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Oct-25 19:28:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Oct-25 19:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.133 (still bad) 2008-Oct-25 19:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.133 (still bad) 2008-Oct-25 19:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.133 (still bad) 2008-Oct-25 19:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.134 (still bad) 2008-Oct-25 19:29:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-25 19:29:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-25 19:29:00 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-25 19:29:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-25 19:29:00 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-25 19:29:00 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-25 19:29:00 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-25 19:29:00 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-25 19:29:00 LOG5 antvel: Calling 'antvel 212100.000000 83100.000000 J 0' 2008-Oct-25 19:29:00 LOG2 antvel: Precessing RA = 21:21:00.0 Dec = +08:31:00.0 Epoch = 2008.82084 J 2008-Oct-25 19:29:00 LOG2 antvel: Computed apparent RA = 21:21:26.9 Dec = +08:33:24.5 2008-Oct-25 19:29:00 LOG2 antvel: Parameters to Doppler: Topocentric 84540 2008 299 0.0 2008-Oct-25 19:29:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-25 19:29:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-25 19:29:00 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-25 19:29:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-25 19:29:00 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-25 19:29:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-25 19:29:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:29:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-25 19:29:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-25 19:29:00 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-25 19:29:00 LOG5 log_alfabeam: Parameters: 21.350000000000001 8.5166666666666675 21.347445 2008.820839987832 18.999933 2008-Oct-25 19:29:00 LOG4 log_alfabeam: ALFABEAM 0 21.349999999999774 8.516666666666669 2008-Oct-25 19:29:00 LOG4 log_alfabeam: ALFABEAM 1 21.348739664915321 8.621143092101871 2008-Oct-25 19:29:00 LOG4 log_alfabeam: ALFABEAM 2 21.344162129710956 8.550575863546909 2008-Oct-25 19:29:00 LOG4 log_alfabeam: ALFABEAM 3 21.345382684341114 8.445975628682197 2008-Oct-25 19:29:00 LOG4 log_alfabeam: ALFABEAM 4 21.351284486760406 8.412225104720360 2008-Oct-25 19:29:00 LOG4 log_alfabeam: ALFABEAM 5 21.355877026261794 8.483500685394089 2008-Oct-25 19:29:00 LOG4 log_alfabeam: ALFABEAM 6 21.354552815215001 8.587813018688594 2008-Oct-25 19:29:00 INFO2 take_data: Starting WAPP+GALFA scan: 829900118 2008-Oct-25 19:29:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-25 19:29:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-25 19:29:01 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-25 19:29:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-25 19:29:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-25 19:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.133 (still bad) 2008-Oct-25 19:29:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:29:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:29:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:29:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84542.00 2008-Oct-25 19:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-25 19:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-25 19:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Oct-25 19:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Oct-25 19:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.134 (still bad) 2008-Oct-25 19:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Oct-25 19:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Oct-25 19:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Oct-25 19:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Oct-25 19:29:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-25 19:29:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-25 19:29:12 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-25 19:29:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-25 19:29:12 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-25 19:29:12 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-25 19:29:12 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-25 19:29:12 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-25 19:29:12 LOG5 antvel: Calling 'antvel 212100.000000 83100.000000 J 0' 2008-Oct-25 19:29:12 LOG2 antvel: Precessing RA = 21:21:00.0 Dec = +08:31:00.0 Epoch = 2008.82084 J 2008-Oct-25 19:29:12 LOG2 antvel: Computed apparent RA = 21:21:26.9 Dec = +08:33:24.5 2008-Oct-25 19:29:12 LOG2 antvel: Parameters to Doppler: Topocentric 84552 2008 299 0.0 2008-Oct-25 19:29:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-25 19:29:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-25 19:29:12 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-25 19:29:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-25 19:29:12 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-25 19:29:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-25 19:29:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:29:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-25 19:29:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-25 19:29:12 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-25 19:29:12 LOG5 log_alfabeam: Parameters: 21.350000000000001 8.5166666666666675 21.350788 2008.820840368089 18.999933 2008-Oct-25 19:29:12 LOG4 log_alfabeam: ALFABEAM 0 21.349999999999643 8.516666666666675 2008-Oct-25 19:29:12 LOG4 log_alfabeam: ALFABEAM 1 21.348774057726537 8.621233085648520 2008-Oct-25 19:29:12 LOG4 log_alfabeam: ALFABEAM 2 21.344173352746552 8.550998091627381 2008-Oct-25 19:29:12 LOG4 log_alfabeam: ALFABEAM 3 21.345359485579866 8.446310736607678 2008-Oct-25 19:29:12 LOG4 log_alfabeam: ALFABEAM 4 21.351250125128630 8.412133363803100 2008-Oct-25 19:29:12 LOG4 log_alfabeam: ALFABEAM 5 21.355866045193473 8.483075660492563 2008-Oct-25 19:29:12 LOG4 log_alfabeam: ALFABEAM 6 21.354576165098507 8.587482603244377 2008-Oct-25 19:29:12 INFO2 take_data: Starting WAPP+GALFA scan: 829900119 2008-Oct-25 19:29:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-25 19:29:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-25 19:29:13 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-25 19:29:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-25 19:29:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-25 19:29:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:29:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:29:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Oct-25 19:29:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84554.00 2008-Oct-25 19:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-25 19:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-25 19:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Oct-25 19:29:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Oct-25 19:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Oct-25 19:29:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Oct-25 19:29:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.992 0.968 0.913 2008-Oct-25 19:29:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.895 1.122 0.887 1.026 2008-Oct-25 19:29:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.899 1.024 0.936 1.017 2008-Oct-25 19:29:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.097 0.920 0.107 2008-Oct-25 19:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Oct-25 19:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Oct-25 19:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Oct-25 19:29:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-25 19:29:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-25 19:29:24 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-25 19:29:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-25 19:29:24 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-25 19:29:24 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-25 19:29:24 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-25 19:29:24 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-25 19:29:24 LOG5 antvel: Calling 'antvel 212100.000000 83100.000000 J 0' 2008-Oct-25 19:29:24 LOG2 antvel: Precessing RA = 21:21:00.0 Dec = +08:31:00.0 Epoch = 2008.82084 J 2008-Oct-25 19:29:24 LOG2 antvel: Computed apparent RA = 21:21:26.9 Dec = +08:33:24.5 2008-Oct-25 19:29:24 LOG2 antvel: Parameters to Doppler: Topocentric 84564 2008 299 0.0 2008-Oct-25 19:29:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-25 19:29:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-25 19:29:24 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-25 19:29:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-25 19:29:24 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-25 19:29:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-25 19:29:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:29:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-25 19:29:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-25 19:29:24 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-25 19:29:24 LOG5 log_alfabeam: Parameters: 21.350000000000001 8.5166666666666675 21.354130 2008.820840748346 18.999933 2008-Oct-25 19:29:24 LOG4 log_alfabeam: ALFABEAM 0 21.349999999999163 8.516666666666675 2008-Oct-25 19:29:24 LOG4 log_alfabeam: ALFABEAM 1 21.348808472474747 8.621320570487983 2008-Oct-25 19:29:24 LOG4 log_alfabeam: ALFABEAM 2 21.344184711751186 8.551419407486167 2008-Oct-25 19:29:24 LOG4 log_alfabeam: ALFABEAM 3 21.345336402763852 8.446647445661750 2008-Oct-25 19:29:24 LOG4 log_alfabeam: ALFABEAM 4 21.351215740400963 8.412044128789011 2008-Oct-25 19:29:24 LOG4 log_alfabeam: ALFABEAM 5 21.355854926243676 8.482651511662114 2008-Oct-25 19:29:24 LOG4 log_alfabeam: ALFABEAM 6 21.354599402096092 8.587150563019231 2008-Oct-25 19:29:24 INFO2 take_data: Starting WAPP+GALFA scan: 829900120 2008-Oct-25 19:29:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-25 19:29:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-25 19:29:25 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-25 19:29:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-25 19:29:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-25 19:29:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:29:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:29:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84566.00 2008-Oct-25 19:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Oct-25 19:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-25 19:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-25 19:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Oct-25 19:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Oct-25 19:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Oct-25 19:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Oct-25 19:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Oct-25 19:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Oct-25 19:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Oct-25 19:29:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-25 19:29:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-25 19:29:36 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-25 19:29:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-25 19:29:36 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-25 19:29:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-25 19:29:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-25 19:29:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-25 19:29:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-25 19:29:36 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-25 19:29:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-25 19:29:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-25 19:29:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-25 19:29:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-25 19:29:36 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-25 19:29:36 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-25 19:29:36 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-25 19:29:36 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-25 19:29:36 LOG5 antvel: Calling 'antvel 212100.000000 83100.000000 J 0' 2008-Oct-25 19:29:36 LOG2 antvel: Precessing RA = 21:21:00.0 Dec = +08:31:00.0 Epoch = 2008.82084 J 2008-Oct-25 19:29:36 LOG2 antvel: Computed apparent RA = 21:21:26.9 Dec = +08:33:24.5 2008-Oct-25 19:29:36 LOG2 antvel: Parameters to Doppler: Topocentric 84576 2008 299 0.0 2008-Oct-25 19:29:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-25 19:29:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-25 19:29:36 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-25 19:29:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-25 19:29:36 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-25 19:29:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-25 19:29:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:29:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-25 19:29:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-25 19:29:36 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-25 19:29:36 LOG5 log_alfabeam: Parameters: 21.350000000000001 8.5166666666666675 21.357472 2008.820841128603 18.999933 2008-Oct-25 19:29:36 LOG4 log_alfabeam: ALFABEAM 0 21.350000000008055 8.516666666666600 2008-Oct-25 19:29:36 LOG4 log_alfabeam: ALFABEAM 1 21.348842916903042 8.621405566961291 2008-Oct-25 19:29:36 LOG4 log_alfabeam: ALFABEAM 2 21.344196209253656 8.551839906261055 2008-Oct-25 19:29:36 LOG4 log_alfabeam: ALFABEAM 3 21.345313430665463 8.446985831069966 2008-Oct-25 19:29:36 LOG4 log_alfabeam: ALFABEAM 4 21.351181324850650 8.411957379076007 2008-Oct-25 19:29:36 LOG4 log_alfabeam: ALFABEAM 5 21.355843666937734 8.482228143350095 2008-Oct-25 19:29:36 LOG4 log_alfabeam: ALFABEAM 6 21.354622531462088 8.586816823490819 2008-Oct-25 19:29:36 INFO2 take_data: Starting WAPP+GALFA scan: 829900121 2008-Oct-25 19:29:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-25 19:29:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-25 19:29:37 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-25 19:29:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-25 19:29:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-25 19:29:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:29:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:29:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:29:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84578.00 2008-Oct-25 19:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Oct-25 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-25 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-25 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Oct-25 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Oct-25 19:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.581 (still bad) 2008-Oct-25 19:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.581 (still bad) 2008-Oct-25 19:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.582 (still bad) 2008-Oct-25 19:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.579 (still bad) 2008-Oct-25 19:29:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-25 19:29:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-25 19:29:48 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-25 19:29:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-25 19:29:48 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-25 19:29:48 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-25 19:29:48 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-25 19:29:48 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-25 19:29:48 LOG5 antvel: Calling 'antvel 212100.000000 83100.000000 J 0' 2008-Oct-25 19:29:48 LOG2 antvel: Precessing RA = 21:21:00.0 Dec = +08:31:00.0 Epoch = 2008.82084 J 2008-Oct-25 19:29:48 LOG2 antvel: Computed apparent RA = 21:21:26.9 Dec = +08:33:24.5 2008-Oct-25 19:29:48 LOG2 antvel: Parameters to Doppler: Topocentric 84588 2008 299 0.0 2008-Oct-25 19:29:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-25 19:29:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-25 19:29:48 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-25 19:29:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-25 19:29:48 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-25 19:29:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-25 19:29:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:29:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-25 19:29:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-25 19:29:48 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-25 19:29:48 LOG5 log_alfabeam: Parameters: 21.350000000000001 8.5166666666666675 21.360815 2008.82084150886 18.999933 2008-Oct-25 19:29:48 LOG4 log_alfabeam: ALFABEAM 0 21.350000000000396 8.516666666666666 2008-Oct-25 19:29:48 LOG4 log_alfabeam: ALFABEAM 1 21.348877398765776 8.621488092990885 2008-Oct-25 19:29:48 LOG4 log_alfabeam: ALFABEAM 2 21.344207847888935 8.552259682295329 2008-Oct-25 19:29:48 LOG4 log_alfabeam: ALFABEAM 3 21.345290564155171 8.447325969686535 2008-Oct-25 19:29:48 LOG4 log_alfabeam: ALFABEAM 4 21.351146870697878 8.411873096478432 2008-Oct-25 19:29:48 LOG4 log_alfabeam: ALFABEAM 5 21.355832264647322 8.481805460766026 2008-Oct-25 19:29:48 LOG4 log_alfabeam: ALFABEAM 6 21.354645558330137 8.586481308487764 2008-Oct-25 19:29:48 INFO2 take_data: Starting WAPP+GALFA scan: 829900122 2008-Oct-25 19:29:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-25 19:29:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-25 19:29:49 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-25 19:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.579 (still bad) 2008-Oct-25 19:29:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-25 19:29:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-25 19:29:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:29:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:29:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:29:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84590.00 2008-Oct-25 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-25 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-25 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Oct-25 19:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.560 (still bad) 2008-Oct-25 19:29:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Oct-25 19:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.559 (still bad) 2008-Oct-25 19:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.561 (still bad) 2008-Oct-25 19:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.559 (still bad) 2008-Oct-25 19:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.558 (still bad) 2008-Oct-25 19:30:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-25 19:30:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-25 19:30:00 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-25 19:30:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-25 19:30:00 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-25 19:30:00 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-25 19:30:00 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-25 19:30:00 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-25 19:30:00 LOG5 antvel: Calling 'antvel 212100.000000 83100.000000 J 0' 2008-Oct-25 19:30:00 LOG2 antvel: Precessing RA = 21:21:00.0 Dec = +08:31:00.0 Epoch = 2008.82084 J 2008-Oct-25 19:30:00 LOG2 antvel: Computed apparent RA = 21:21:26.9 Dec = +08:33:24.5 2008-Oct-25 19:30:00 LOG2 antvel: Parameters to Doppler: Topocentric 84600 2008 299 0.0 2008-Oct-25 19:30:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-25 19:30:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-25 19:30:00 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-25 19:30:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-25 19:30:00 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-25 19:30:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-25 19:30:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:30:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-25 19:30:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-25 19:30:00 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-25 19:30:00 LOG5 log_alfabeam: Parameters: 21.350000000000001 8.5166666666666675 21.364157 2008.8208418891172 18.999933 2008-Oct-25 19:30:00 LOG4 log_alfabeam: ALFABEAM 0 21.350000000000119 8.516666666666662 2008-Oct-25 19:30:00 LOG4 log_alfabeam: ALFABEAM 1 21.348911894887621 8.621568093373414 2008-Oct-25 19:30:00 LOG4 log_alfabeam: ALFABEAM 2 21.344219619822340 8.552678453537673 2008-Oct-25 19:30:00 LOG4 log_alfabeam: ALFABEAM 3 21.345267818601879 8.447667632502181 2008-Oct-25 19:30:00 LOG4 log_alfabeam: ALFABEAM 4 21.351112401121931 8.411791337513417 2008-Oct-25 19:30:00 LOG4 log_alfabeam: ALFABEAM 5 21.355820727054002 8.481383748137974 2008-Oct-25 19:30:00 LOG4 log_alfabeam: ALFABEAM 6 21.354668467232511 8.586144243562821 2008-Oct-25 19:30:00 INFO2 take_data: Starting WAPP+GALFA scan: 829900123 2008-Oct-25 19:30:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-25 19:30:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-25 19:30:01 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-25 19:30:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-25 19:30:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-25 19:30:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:30:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:30:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.559 (still bad) 2008-Oct-25 19:30:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84602.00 2008-Oct-25 19:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-25 19:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-25 19:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Oct-25 19:30:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Oct-25 19:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.558 (still bad) 2008-Oct-25 19:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.560 (still bad) 2008-Oct-25 19:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.557 (still bad) 2008-Oct-25 19:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.559 (still bad) 2008-Oct-25 19:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.559 (still bad) 2008-Oct-25 19:30:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-25 19:30:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-25 19:30:12 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-25 19:30:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-25 19:30:12 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-25 19:30:12 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-25 19:30:12 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-25 19:30:12 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-25 19:30:12 LOG5 antvel: Calling 'antvel 212100.000000 83100.000000 J 0' 2008-Oct-25 19:30:12 LOG2 antvel: Precessing RA = 21:21:00.0 Dec = +08:31:00.0 Epoch = 2008.82084 J 2008-Oct-25 19:30:12 LOG2 antvel: Computed apparent RA = 21:21:26.9 Dec = +08:33:24.5 2008-Oct-25 19:30:12 LOG2 antvel: Parameters to Doppler: Topocentric 84612 2008 299 0.0 2008-Oct-25 19:30:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-25 19:30:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-25 19:30:12 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-25 19:30:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-25 19:30:12 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-25 19:30:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-25 19:30:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:30:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-25 19:30:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-25 19:30:12 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-25 19:30:12 LOG5 log_alfabeam: Parameters: 21.350000000000001 8.5166666666666675 21.367500 2008.8208422693742 18.999933 2008-Oct-25 19:30:12 LOG4 log_alfabeam: ALFABEAM 0 21.349999999999927 8.516666666666667 2008-Oct-25 19:30:12 LOG4 log_alfabeam: ALFABEAM 1 21.348946423346380 8.621645610715721 2008-Oct-25 19:30:12 LOG4 log_alfabeam: ALFABEAM 2 21.344231531182075 8.553096439878793 2008-Oct-25 19:30:12 LOG4 log_alfabeam: ALFABEAM 3 21.345245182042898 8.448010998097267 2008-Oct-25 19:30:12 LOG4 log_alfabeam: ALFABEAM 4 21.351077898053280 8.411712058785739 2008-Oct-25 19:30:12 LOG4 log_alfabeam: ALFABEAM 5 21.355809048128464 8.480962784263822 2008-Oct-25 19:30:12 LOG4 log_alfabeam: ALFABEAM 6 21.354691270198973 8.585805452204312 2008-Oct-25 19:30:12 INFO2 take_data: Starting WAPP+GALFA scan: 829900124 2008-Oct-25 19:30:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-25 19:30:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-25 19:30:13 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-25 19:30:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-25 19:30:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-25 19:30:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:30:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:30:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:30:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84614.00 2008-Oct-25 19:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.558 (still bad) 2008-Oct-25 19:30:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-25 19:30:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:30:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:30:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-25 19:30:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:30:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:30:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:30:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Oct-25 19:30:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Oct-25 19:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.554 (still bad) 2008-Oct-25 19:30:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Oct-25 19:30:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.472 1.354 1.335 1.243 2008-Oct-25 19:30:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.238 1.552 1.261 1.423 2008-Oct-25 19:30:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.279 1.434 1.333 1.367 2008-Oct-25 19:30:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.463 0.098 1.286 0.108 2008-Oct-25 19:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.552 (still bad) 2008-Oct-25 19:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.554 (still bad) 2008-Oct-25 19:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.553 (still bad) 2008-Oct-25 19:30:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-25 19:30:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-25 19:30:24 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-25 19:30:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-25 19:30:24 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-25 19:30:24 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-25 19:30:24 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-25 19:30:24 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-25 19:30:24 LOG5 antvel: Calling 'antvel 212100.000000 83100.000000 J 0' 2008-Oct-25 19:30:24 LOG2 antvel: Precessing RA = 21:21:00.0 Dec = +08:31:00.0 Epoch = 2008.82084 J 2008-Oct-25 19:30:24 LOG2 antvel: Computed apparent RA = 21:21:26.9 Dec = +08:33:24.5 2008-Oct-25 19:30:24 LOG2 antvel: Parameters to Doppler: Topocentric 84624 2008 299 0.0 2008-Oct-25 19:30:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-25 19:30:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-25 19:30:24 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-25 19:30:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-25 19:30:24 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-25 19:30:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-25 19:30:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:30:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-25 19:30:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-25 19:30:24 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-25 19:30:24 LOG5 log_alfabeam: Parameters: 21.350000000000001 8.5166666666666675 21.370842 2008.8208426496312 18.999933 2008-Oct-25 19:30:24 LOG4 log_alfabeam: ALFABEAM 0 21.350000000000104 8.516666666666666 2008-Oct-25 19:30:24 LOG4 log_alfabeam: ALFABEAM 1 21.348980960917260 8.621720593940255 2008-Oct-25 19:30:24 LOG4 log_alfabeam: ALFABEAM 2 21.344243573897831 8.553513360758593 2008-Oct-25 19:30:24 LOG4 log_alfabeam: ALFABEAM 3 21.345222669646688 8.448355834821280 2008-Oct-25 19:30:24 LOG4 log_alfabeam: ALFABEAM 4 21.351043384696066 8.411635312691184 2008-Oct-25 19:30:24 LOG4 log_alfabeam: ALFABEAM 5 21.355797235767664 8.480542851943886 2008-Oct-25 19:30:24 LOG4 log_alfabeam: ALFABEAM 6 21.354713951934013 8.585465162651094 2008-Oct-25 19:30:24 INFO2 take_data: Starting WAPP+GALFA scan: 829900125 2008-Oct-25 19:30:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-25 19:30:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-25 19:30:25 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-25 19:30:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-25 19:30:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-25 19:30:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:30:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:30:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:30:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84626.00 2008-Oct-25 19:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.552 (still bad) 2008-Oct-25 19:30:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-25 19:30:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:30:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:30:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-25 19:30:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:30:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:30:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:30:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Oct-25 19:30:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Oct-25 19:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.541 (still bad) 2008-Oct-25 19:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.542 (still bad) 2008-Oct-25 19:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.541 (still bad) 2008-Oct-25 19:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.542 (still bad) 2008-Oct-25 19:30:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-25 19:30:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-25 19:30:36 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-25 19:30:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-25 19:30:36 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-25 19:30:36 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-25 19:30:36 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-25 19:30:36 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-25 19:30:36 LOG5 antvel: Calling 'antvel 212100.000000 83100.000000 J 0' 2008-Oct-25 19:30:36 LOG2 antvel: Precessing RA = 21:21:00.0 Dec = +08:31:00.0 Epoch = 2008.82084 J 2008-Oct-25 19:30:36 LOG2 antvel: Computed apparent RA = 21:21:26.9 Dec = +08:33:24.5 2008-Oct-25 19:30:36 LOG2 antvel: Parameters to Doppler: Topocentric 84636 2008 299 0.0 2008-Oct-25 19:30:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-25 19:30:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-25 19:30:36 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-25 19:30:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-25 19:30:36 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-25 19:30:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-25 19:30:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:30:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-25 19:30:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-25 19:30:36 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-25 19:30:36 LOG5 log_alfabeam: Parameters: 21.350000000000001 8.5166666666666675 21.374185 2008.8208430298882 18.999933 2008-Oct-25 19:30:36 LOG4 log_alfabeam: ALFABEAM 0 21.350000000000136 8.516666666666664 2008-Oct-25 19:30:36 LOG4 log_alfabeam: ALFABEAM 1 21.349015525697503 8.621793083783654 2008-Oct-25 19:30:36 LOG4 log_alfabeam: ALFABEAM 2 21.344255754202113 8.553929435401626 2008-Oct-25 19:30:36 LOG4 log_alfabeam: ALFABEAM 3 21.345200269538953 8.448702322461180 2008-Oct-25 19:30:36 LOG4 log_alfabeam: ALFABEAM 4 21.351008842964045 8.411561057703102 2008-Oct-25 19:30:36 LOG4 log_alfabeam: ALFABEAM 5 21.355785283843048 8.480123730620440 2008-Oct-25 19:30:36 LOG4 log_alfabeam: ALFABEAM 6 21.354736524386080 8.585123197170097 2008-Oct-25 19:30:36 INFO2 take_data: Starting WAPP+GALFA scan: 829900126 2008-Oct-25 19:30:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-25 19:30:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-25 19:30:37 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-25 19:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.540 (still bad) 2008-Oct-25 19:30:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-25 19:30:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-25 19:30:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-25 19:30:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:30:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-25 19:30:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84638.00 2008-Oct-25 19:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-25 19:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-25 19:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-25 19:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Oct-25 19:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Oct-25 19:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.541 (still bad) 2008-Oct-25 19:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Oct-25 19:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.541 (still bad) 2008-Oct-25 19:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.537 (still bad) 2008-Oct-25 19:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.535 (still bad) 2008-Oct-25 19:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.538 (still bad) 2008-Oct-25 19:30:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-25 19:30:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-25 19:30:48 LOG5 end_t