2008-Oct-24 19:34:45 BEGIN executive: CIMA executive starting ... 2008-Oct-24 19:34:45 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-24 19:34:45 INFO1 executive: Using CIMA version 3.0.05 'next' from 2008-10-21 17:39 2008-Oct-24 19:34:45 INFO4 executive: This is an ON-LINE session 2008-Oct-24 19:34:45 INFO4 executive: This is a LOCAL session 2008-Oct-24 19:34:45 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-24 19:34:45 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'CA and KS' 2008-Oct-24 19:34:45 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081024' 2008-Oct-24 19:34:46 LOG2 log_preferences: Currently applied preferences: 2008-Oct-24 19:34:46 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-24 19:34:46 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-24 19:34:46 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-24 19:34:46 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-24 19:34:46 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-24 19:34:46 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-24 19:34:46 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-24 19:34:46 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-24 19:34:46 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-24 19:34:46 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-24 19:34:46 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-24 19:34:46 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-24 19:34:46 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-24 19:34:46 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-24 19:34:46 ALERT executive: CIMA executive ready 2008-Oct-24 19:34:47 NOTE frontend: CIMA frontend ready 2008-Oct-24 19:34:49 LOG4 got_cormsg: From DATATAKING: vw% setup 2008-Oct-24 19:34:50 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-24 19:34:50 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-24 19:34:50 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-24 19:34:50 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-24 19:34:50 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-24 19:34:50 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-24 19:34:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-24 19:34:50 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-24 19:34:50 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-24 19:34:50 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-24 19:34:50 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-24 19:34:50 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-24 19:34:50 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-24 19:34:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:34:50 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-24 19:34:50 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-24 19:34:52 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-24 19:34:52 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-24 19:34:52 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-24 19:34:52 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-24 19:34:53 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-24 19:34:53 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-24 19:34:53 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-24 19:34:53 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-24 19:34:53 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-24 19:34:53 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Oct-24 19:34:56 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-24 19:34:56 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:34:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:34:56 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-24 19:34:56 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-24 19:34:56 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-24 19:34:56 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-24 19:35:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:04 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-24 19:35:11 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-24 19:35:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-24 19:35:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-24 19:35:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-24 19:35:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-24 19:35:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-24 19:35:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-24 19:35:11 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-24 19:35:11 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-24 19:35:11 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-24 19:35:11 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-24 19:35:11 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-24 19:35:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-24 19:35:11 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-24 19:35:12 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-24 19:35:12 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-24 19:35:12 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-24 19:35:12 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-24 19:35:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-24 19:35:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-24 19:35:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-24 19:35:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-24 19:35:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-24 19:35:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-24 19:35:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-24 19:35:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-24 19:35:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-24 19:35:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-24 19:35:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-24 19:35:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-24 19:35:14 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-24 19:35:14 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-24 19:35:14 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-24 19:35:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-24 19:35:14 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-24 19:35:14 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-24 19:35:14 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Oct-24 19:35:14 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-24 19:35:14 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-24 19:35:14 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-24 19:35:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-24 19:35:14 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-24 19:35:14 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-24 19:35:14 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-24 19:35:14 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-24 19:35:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:35:14 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-24 19:35:14 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-24 19:35:14 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-24 19:35:14 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-24 19:35:14 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-24 19:35:14 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-24 19:35:14 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-24 19:35:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-24 19:35:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 19:35:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-24 19:35:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 19:35:14 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-24 19:35:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 19:35:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 19:35:14 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-24 19:35:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 19:35:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-24 19:35:14 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-24 19:35:14 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-24 19:35:14 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-24 19:35:14 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-24 19:35:14 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-24 19:35:14 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-24 19:35:14 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-24 19:35:14 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-24 19:35:14 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-24 19:35:14 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-24 19:35:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-24 19:35:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:35:15 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-24 19:35:15 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-24 19:35:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:35:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-24 19:35:30 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-24 19:35:30 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-24 19:35:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-24 19:35:30 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-24 19:35:30 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-24 19:35:30 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-24 19:35:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:35:30 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-24 19:35:30 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-24 19:35:30 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-24 19:35:30 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-24 19:35:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-24 19:35:31 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-24 19:35:31 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-24 19:35:31 START begin_task: Starting task 'selecting calibration port' 2008-Oct-24 19:35:31 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-24 19:35:31 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-24 19:35:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-24 19:35:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:35:31 START begin_task: Starting task 'waiting on calport' 2008-Oct-24 19:35:31 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-24 19:35:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:31 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-24 19:35:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:35:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-24 19:35:31 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-24 19:35:31 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-24 19:35:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-24 19:35:31 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-24 19:35:31 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-24 19:35:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-24 19:35:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-24 19:35:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 19:35:31 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-24 19:35:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 19:35:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 19:35:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 19:35:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 19:35:31 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-24 19:35:31 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-24 19:35:31 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-24 19:35:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 19:35:31 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-24 19:35:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 19:35:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 19:35:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 19:35:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 19:35:31 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-24 19:35:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-24 19:35:32 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-24 19:35:32 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-24 19:35:32 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-24 19:35:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:35:32 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-24 19:35:32 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-24 19:35:32 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-24 19:35:32 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-24 19:35:32 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-24 19:35:32 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-24 19:35:32 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-24 19:35:32 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-24 19:35:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-24 19:35:32 LOG3 track_source: Calling 'track_source galfasrc 212400.0 +092924 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-24 19:35:32 START begin_task: Starting task 'sending tracking commands' 2008-Oct-24 19:35:32 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-24 19:35:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-24 19:35:32 INFO1 track_source: Starting to track galfasrc 2008-Oct-24 19:35:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-24 19:35:32 LOG3 vw_send: To DATATAKING: set ra 212400.0 2008-Oct-24 19:35:32 LOG3 vw_send: To DATATAKING: set dec +092924 2008-Oct-24 19:35:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-24 19:35:32 LOG3 vw_send: To DATATAKING: pnt tr 212400.0 +092924 -CJ 2008-Oct-24 19:35:32 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-24 19:35:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-24 19:35:32 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-24 19:35:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-24 19:35:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:35:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-24 19:35:32 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-24 19:35:32 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-24 19:35:32 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-24 19:35:32 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-24 19:35:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:35:32 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-24 19:35:32 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-24 19:35:32 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-24 19:35:32 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-24 19:35:32 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-24 19:35:32 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-24 19:35:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-24 19:35:32 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-24 19:35:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-24 19:35:32 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-24 19:35:32 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-24 19:35:32 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-24 19:35:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-24 19:35:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20081024.a2010.0009.fits 2008-Oct-24 19:35:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-24 19:35:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-24 19:35:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-24 19:35:33 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081024.a2010.0009.fits} 2008-Oct-24 19:35:33 LOG4 got_cormsg: From DATATAKING: set ra 212400.0 2008-Oct-24 19:35:33 LOG4 got_cormsg: From DATATAKING: set dec +092924 2008-Oct-24 19:35:33 LOG4 got_cormsg: From DATATAKING: vw% 212400.0 2008-Oct-24 19:35:33 LOG4 got_cormsg: From DATATAKING: vw% +092924 2008-Oct-24 19:35:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-24 19:35:33 LOG4 got_cormsg: From DATATAKING: pnt tr 212400.0 +092924 -CJ 2008-Oct-24 19:35:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-24 19:35:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-24 19:35:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:35:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-24 19:35:34 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-24 19:35:34 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-24 19:35:34 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-24 19:35:34 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-24 19:35:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-24 19:35:34 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-24 19:35:34 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-24 19:35:34 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-24 19:35:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:35:34 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-24 19:35:34 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-24 19:35:34 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-24 19:35:34 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-24 19:35:34 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-24 19:35:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-24 19:35:34 LOG3 waittrk: Start waittrk 5 2008-Oct-24 19:35:34 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-24 19:35:34 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-24 19:35:39 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-24 19:35:39 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-24 19:35:39 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-24 19:35:39 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-24 19:36:12 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-24 19:36:12 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-24 19:36:12 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-24 19:36:12 INFO2 waittrk: Now tracking galfasrc 2008-Oct-24 19:36:12 LOG4 waittrk: Current telescope position: Az = 359.10 ZA = 8.79 2008-Oct-24 19:36:12 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-24 19:36:12 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-24 19:36:12 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-24 19:36:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:36:12 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-24 19:36:12 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-24 19:36:12 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-24 19:36:12 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-24 19:36:12 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-24 19:36:12 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-24 19:36:12 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-24 19:36:12 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-24 19:36:12 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-24 19:36:12 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-24 19:36:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-24 19:36:12 START begin_task: Starting task 'selecting calibration type' 2008-Oct-24 19:36:12 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-24 19:36:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-24 19:36:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-24 19:36:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:36:13 START begin_task: Starting task 'waiting on setcal' 2008-Oct-24 19:36:13 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-24 19:36:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-24 19:36:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:36:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:36:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-24 19:36:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-24 19:36:13 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-24 19:36:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-24 19:36:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 19:36:13 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-24 19:36:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 19:36:13 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-24 19:36:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:36:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 19:36:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 19:36:13 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-24 19:36:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 19:36:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-24 19:36:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 19:36:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-24 19:36:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 19:36:13 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-24 19:36:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 19:36:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 19:36:13 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-24 19:36:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 19:36:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-24 19:36:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-24 19:36:13 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-24 19:36:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-24 19:36:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-24 19:36:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-24 19:36:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-24 19:36:13 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081024.a2010.0009.fits' is empty! 2008-Oct-24 19:36:13 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-24 19:36:13 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-24 19:36:13 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-24 19:36:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-24 19:36:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-24 19:36:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 19:36:13 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-24 19:36:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 19:36:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 19:36:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 19:36:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 19:36:13 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-24 19:36:13 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-24 19:36:13 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-24 19:36:13 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-24 19:36:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-24 19:36:13 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-24 19:36:13 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-24 19:36:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-24 19:36:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:36:13 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-24 19:36:13 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-24 19:36:14 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-24 19:36:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:36:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-24 19:36:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:36:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-24 19:36:16 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-24 19:36:16 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-24 19:36:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-24 19:36:16 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-24 19:36:16 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-24 19:36:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-24 19:36:16 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-24 19:36:16 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-24 19:36:16 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-24 19:36:16 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-24 19:36:16 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-24 19:36:16 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-24 19:36:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-24 19:36:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:36:17 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-24 19:36:17 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2008-Oct-24 19:36:17 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2008-Oct-24 19:36:17 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Oct-24 19:36:17 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-24 19:36:17 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-24 19:36:17 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-24 19:36:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.071 1.029 ALFA beam 1: 0.995 0.896 2008-Oct-24 19:36:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.926 0.904 ALFA beam 3: 0.932 1.051 2008-Oct-24 19:36:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.966 1.016 ALFA beam 5: 0.989 1.050 2008-Oct-24 19:36:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.053 0.097 ALFA beam 7: 0.934 0.108 2008-Oct-24 19:36:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-24 19:36:17 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-24 19:36:17 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-24 19:36:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:36:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-24 19:36:17 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-24 19:36:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-24 19:36:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-24 19:36:17 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-24 19:36:17 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-24 19:36:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:36:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-24 19:36:17 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-24 19:36:17 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-24 19:36:17 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-24 19:36:17 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-24 19:36:17 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:36:17 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:36:17 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:36:17 LOG2 antvel: Parameters to Doppler: Topocentric 84977 2008 298 0.0 2008-Oct-24 19:36:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:36:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-24 19:36:17 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-24 19:36:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:36:17 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:36:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-24 19:36:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:36:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:36:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:36:17 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-24 19:36:17 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.403457 2008.8181159847388 18.999933 2008-Oct-24 19:36:17 LOG4 log_alfabeam: ALFABEAM 0 21.399999999999043 9.490000000000013 2008-Oct-24 19:36:17 LOG4 log_alfabeam: ALFABEAM 1 21.398795750587954 9.594628368028603 2008-Oct-24 19:36:17 LOG4 log_alfabeam: ALFABEAM 2 21.394167678851314 9.524661272126934 2008-Oct-24 19:36:17 LOG4 log_alfabeam: ALFABEAM 3 21.395327504780141 9.419900918502531 2008-Oct-24 19:36:17 LOG4 log_alfabeam: ALFABEAM 4 21.401231243457659 9.385407133880655 2008-Oct-24 19:36:17 LOG4 log_alfabeam: ALFABEAM 5 21.405876445063406 9.456160139501318 2008-Oct-24 19:36:17 LOG4 log_alfabeam: ALFABEAM 6 21.404600844145271 9.560614305452750 2008-Oct-24 19:36:17 INFO2 take_data: Starting WAPP+GALFA scan: 829800140 2008-Oct-24 19:36:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:36:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:36:18 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-24 19:36:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:36:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-24 19:36:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:36:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84979.00 2008-Oct-24 19:36:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:36:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:36:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:36:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:36:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:36:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:36:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:36:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:36:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:36:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Oct-24 19:36:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.057 1.033 0.913 2008-Oct-24 19:36:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.928 0.990 1.093 2008-Oct-24 19:36:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 1.056 1.050 1.087 2008-Oct-24 19:36:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.053 0.097 0.934 0.108 2008-Oct-24 19:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2008-Oct-24 19:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2008-Oct-24 19:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Oct-24 19:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Oct-24 19:36:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:36:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:36:29 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-24 19:36:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:36:29 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-24 19:36:29 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-24 19:36:29 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-24 19:36:29 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-24 19:36:29 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:36:29 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:36:29 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:36:29 LOG2 antvel: Parameters to Doppler: Topocentric 84989 2008 298 0.0 2008-Oct-24 19:36:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:36:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-24 19:36:29 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-24 19:36:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:36:29 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:36:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-24 19:36:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:36:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:36:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:36:29 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-24 19:36:29 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.406799 2008.8181163649961 18.999933 2008-Oct-24 19:36:29 LOG4 log_alfabeam: ALFABEAM 0 21.399999999997387 9.490000000000020 2008-Oct-24 19:36:29 LOG4 log_alfabeam: ALFABEAM 1 21.398834056489605 9.594723265255707 2008-Oct-24 19:36:29 LOG4 log_alfabeam: ALFABEAM 2 21.394180442242806 9.525127793456035 2008-Oct-24 19:36:29 LOG4 log_alfabeam: ALFABEAM 3 21.395301930682560 9.420276098703329 2008-Oct-24 19:36:29 LOG4 log_alfabeam: ALFABEAM 4 21.401192973724267 9.385310074321763 2008-Oct-24 19:36:29 LOG4 log_alfabeam: ALFABEAM 5 21.405863976938562 9.455690089096203 2008-Oct-24 19:36:29 LOG4 log_alfabeam: ALFABEAM 6 21.404626611846439 9.560244865070681 2008-Oct-24 19:36:29 INFO2 take_data: Starting WAPP+GALFA scan: 829800141 2008-Oct-24 19:36:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:36:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:36:30 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-24 19:36:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:36:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-24 19:36:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:36:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:36:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2008-Oct-24 19:36:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84991.00 2008-Oct-24 19:36:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:36:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:36:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:36:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:36:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:36:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:36:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:36:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:36:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2008-Oct-24 19:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2008-Oct-24 19:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2008-Oct-24 19:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2008-Oct-24 19:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-24 19:36:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:36:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:36:41 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-24 19:36:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:36:41 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-24 19:36:41 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-24 19:36:41 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-24 19:36:41 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-24 19:36:41 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:36:41 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:36:41 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:36:41 LOG2 antvel: Parameters to Doppler: Topocentric 85001 2008 298 0.0 2008-Oct-24 19:36:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:36:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-24 19:36:41 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-24 19:36:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:36:41 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:36:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-24 19:36:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:36:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:36:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:36:41 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-24 19:36:41 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.410142 2008.8181167452531 18.999933 2008-Oct-24 19:36:41 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000457 9.489999999999995 2008-Oct-24 19:36:41 LOG4 log_alfabeam: ALFABEAM 1 21.398872407899987 9.594815120922656 2008-Oct-24 19:36:41 LOG4 log_alfabeam: ALFABEAM 2 21.394193379448101 9.525593415574402 2008-Oct-24 19:36:41 LOG4 log_alfabeam: ALFABEAM 3 21.395276487483034 9.420653428736875 2008-Oct-24 19:36:41 LOG4 log_alfabeam: ALFABEAM 4 21.401154656906328 9.385216051763912 2008-Oct-24 19:36:41 LOG4 log_alfabeam: ALFABEAM 5 21.405851332490055 9.455220887381101 2008-Oct-24 19:36:41 LOG4 log_alfabeam: ALFABEAM 6 21.404652252896653 9.559873244475527 2008-Oct-24 19:36:41 INFO2 take_data: Starting WAPP+GALFA scan: 829800142 2008-Oct-24 19:36:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:36:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:36:42 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-24 19:36:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:36:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-24 19:36:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:36:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:36:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:36:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85003.00 2008-Oct-24 19:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2008-Oct-24 19:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:36:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2008-Oct-24 19:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2008-Oct-24 19:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2008-Oct-24 19:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2008-Oct-24 19:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2008-Oct-24 19:36:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:36:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:36:53 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-24 19:36:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:36:53 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-24 19:36:53 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-24 19:36:53 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-24 19:36:53 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-24 19:36:53 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:36:53 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:36:53 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:36:53 LOG2 antvel: Parameters to Doppler: Topocentric 85013 2008 298 0.0 2008-Oct-24 19:36:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:36:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-24 19:36:53 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-24 19:36:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:36:53 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:36:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-24 19:36:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:36:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:36:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:36:53 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-24 19:36:53 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.413484 2008.8181171255101 18.999933 2008-Oct-24 19:36:53 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000194 9.490000000000004 2008-Oct-24 19:36:53 LOG4 log_alfabeam: ALFABEAM 1 21.398910778384028 9.594903872035811 2008-Oct-24 19:36:53 LOG4 log_alfabeam: ALFABEAM 2 21.394206481523685 9.526057817790367 2008-Oct-24 19:36:53 LOG4 log_alfabeam: ALFABEAM 3 21.395251192698922 9.421032648118475 2008-Oct-24 19:36:53 LOG4 log_alfabeam: ALFABEAM 4 21.401116319414164 9.385125130894931 2008-Oct-24 19:36:53 LOG4 log_alfabeam: ALFABEAM 5 21.405838520438532 9.454752857849394 2008-Oct-24 19:36:53 LOG4 log_alfabeam: ALFABEAM 6 21.404677749626646 9.559499699690633 2008-Oct-24 19:36:53 INFO2 take_data: Starting WAPP+GALFA scan: 829800143 2008-Oct-24 19:36:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:36:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:36:54 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-24 19:36:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:36:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-24 19:36:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:36:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:36:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:36:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85015.00 2008-Oct-24 19:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2008-Oct-24 19:36:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:36:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:36:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:36:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:36:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:36:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:36:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:36:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:36:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2008-Oct-24 19:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2008-Oct-24 19:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2008-Oct-24 19:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2008-Oct-24 19:37:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2008-Oct-24 19:37:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:37:05 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-24 19:37:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:37:05 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-24 19:37:05 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-24 19:37:05 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-24 19:37:05 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-24 19:37:05 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:37:05 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:37:05 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:37:05 LOG2 antvel: Parameters to Doppler: Topocentric 85025 2008 298 0.0 2008-Oct-24 19:37:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:37:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-24 19:37:05 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-24 19:37:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:37:05 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:37:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-24 19:37:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:37:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:37:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:37:05 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-24 19:37:05 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.416826 2008.8181175057671 18.999933 2008-Oct-24 19:37:05 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000201 9.489999999999997 2008-Oct-24 19:37:05 LOG4 log_alfabeam: ALFABEAM 1 21.398949175908985 9.594989539345029 2008-Oct-24 19:37:05 LOG4 log_alfabeam: ALFABEAM 2 21.394219751065734 9.526521097735388 2008-Oct-24 19:37:05 LOG4 log_alfabeam: ALFABEAM 3 21.395226040954622 9.421413834138393 2008-Oct-24 19:37:05 LOG4 log_alfabeam: ALFABEAM 4 21.401077953288031 9.385037290716395 2008-Oct-24 19:37:05 LOG4 log_alfabeam: ALFABEAM 5 21.405825538204223 9.454285902484143 2008-Oct-24 19:37:05 LOG4 log_alfabeam: ALFABEAM 6 21.404703107429416 9.559124154105641 2008-Oct-24 19:37:05 INFO2 take_data: Starting WAPP+GALFA scan: 829800144 2008-Oct-24 19:37:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:37:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:37:06 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-24 19:37:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:37:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-24 19:37:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:37:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:37:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:37:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85027.00 2008-Oct-24 19:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2008-Oct-24 19:37:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:37:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:37:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:37:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:37:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:37:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:37:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:37:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:37:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.068 (still bad) 2008-Oct-24 19:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.067 (still bad) 2008-Oct-24 19:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.068 (still bad) 2008-Oct-24 19:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.070 (still bad) 2008-Oct-24 19:37:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:37:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:37:17 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-24 19:37:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:37:17 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-24 19:37:17 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-24 19:37:17 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-24 19:37:17 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-24 19:37:17 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:37:17 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:37:17 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:37:17 LOG2 antvel: Parameters to Doppler: Topocentric 85037 2008 298 0.0 2008-Oct-24 19:37:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:37:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-24 19:37:17 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-24 19:37:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:37:17 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:37:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-24 19:37:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:37:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:37:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:37:17 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-24 19:37:17 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.420169 2008.8181178860243 18.999933 2008-Oct-24 19:37:17 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000080 9.489999999999995 2008-Oct-24 19:37:17 LOG4 log_alfabeam: ALFABEAM 1 21.398987608467376 9.595072140763115 2008-Oct-24 19:37:17 LOG4 log_alfabeam: ALFABEAM 2 21.394233190824703 9.526983352023873 2008-Oct-24 19:37:17 LOG4 log_alfabeam: ALFABEAM 3 21.395201027005136 9.421797065911345 2008-Oct-24 19:37:17 LOG4 log_alfabeam: ALFABEAM 4 21.401039550537259 9.384952513064048 2008-Oct-24 19:37:17 LOG4 log_alfabeam: ALFABEAM 5 21.405812383088250 9.453819924244758 2008-Oct-24 19:37:17 LOG4 log_alfabeam: ALFABEAM 6 21.404728331575683 9.558746529257544 2008-Oct-24 19:37:17 INFO2 take_data: Starting WAPP+GALFA scan: 829800145 2008-Oct-24 19:37:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:37:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:37:18 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-24 19:37:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:37:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-24 19:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.069 (still bad) 2008-Oct-24 19:37:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:37:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:37:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:37:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85039.00 2008-Oct-24 19:37:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:37:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:37:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:37:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:37:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:37:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:37:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:37:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:37:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.069 (still bad) 2008-Oct-24 19:37:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:37:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 1.025 0.988 0.891 2008-Oct-24 19:37:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.901 0.938 1.064 2008-Oct-24 19:37:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.978 1.036 0.977 1.041 2008-Oct-24 19:37:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.099 0.939 0.109 2008-Oct-24 19:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.066 (still bad) 2008-Oct-24 19:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.067 (still bad) 2008-Oct-24 19:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.066 (still bad) 2008-Oct-24 19:37:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:37:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:37:29 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-24 19:37:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:37:29 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-24 19:37:29 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-24 19:37:29 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-24 19:37:29 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-24 19:37:29 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:37:29 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:37:29 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:37:29 LOG2 antvel: Parameters to Doppler: Topocentric 85049 2008 298 0.0 2008-Oct-24 19:37:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:37:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-24 19:37:29 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-24 19:37:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:37:29 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:37:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-24 19:37:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:37:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:37:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:37:29 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-24 19:37:29 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.423511 2008.8181182662813 18.999933 2008-Oct-24 19:37:29 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000194 9.490000000000002 2008-Oct-24 19:37:29 LOG4 log_alfabeam: ALFABEAM 1 21.399026049553747 9.595151621394090 2008-Oct-24 19:37:29 LOG4 log_alfabeam: ALFABEAM 2 21.394246791420422 9.527444262956603 2008-Oct-24 19:37:29 LOG4 log_alfabeam: ALFABEAM 3 21.395176167989987 9.422182077833796 2008-Oct-24 19:37:29 LOG4 log_alfabeam: ALFABEAM 4 21.401001137645252 9.384870854536631 2008-Oct-24 19:37:29 LOG4 log_alfabeam: ALFABEAM 5 21.405799064244661 9.453355243770172 2008-Oct-24 19:37:29 LOG4 log_alfabeam: ALFABEAM 6 21.404753404758974 9.558367086388685 2008-Oct-24 19:37:29 INFO2 take_data: Starting WAPP+GALFA scan: 829800146 2008-Oct-24 19:37:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:37:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:37:30 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-24 19:37:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:37:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-24 19:37:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:37:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:37:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.064 (still bad) 2008-Oct-24 19:37:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85051.00 2008-Oct-24 19:37:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:37:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:37:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:37:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:37:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:37:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:37:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:37:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:37:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.065 (still bad) 2008-Oct-24 19:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.065 (still bad) 2008-Oct-24 19:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.066 (still bad) 2008-Oct-24 19:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.066 (still bad) 2008-Oct-24 19:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.066 (still bad) 2008-Oct-24 19:37:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:37:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:37:41 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-24 19:37:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:37:41 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-24 19:37:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-24 19:37:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-24 19:37:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-24 19:37:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 19:37:41 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-24 19:37:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 19:37:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-24 19:37:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 19:37:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 19:37:41 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-24 19:37:41 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-24 19:37:41 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-24 19:37:41 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-24 19:37:41 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:37:41 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:37:41 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:37:41 LOG2 antvel: Parameters to Doppler: Topocentric 85061 2008 298 0.0 2008-Oct-24 19:37:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:37:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-24 19:37:41 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-24 19:37:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:37:41 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:37:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-24 19:37:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:37:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:37:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:37:41 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-24 19:37:41 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.426854 2008.8181186465383 18.999933 2008-Oct-24 19:37:41 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000091 9.490000000000002 2008-Oct-24 19:37:41 LOG4 log_alfabeam: ALFABEAM 1 21.399064518656470 9.595228024180129 2008-Oct-24 19:37:41 LOG4 log_alfabeam: ALFABEAM 2 21.394260559607194 9.527904065561064 2008-Oct-24 19:37:41 LOG4 log_alfabeam: ALFABEAM 3 21.395151451165461 9.422569063474146 2008-Oct-24 19:37:41 LOG4 log_alfabeam: ALFABEAM 4 21.400962695136776 9.384792271289994 2008-Oct-24 19:37:41 LOG4 log_alfabeam: ALFABEAM 5 21.405785575037338 9.452891624505543 2008-Oct-24 19:37:41 LOG4 log_alfabeam: ALFABEAM 6 21.404778339807720 9.557985634270318 2008-Oct-24 19:37:41 INFO2 take_data: Starting WAPP+GALFA scan: 829800147 2008-Oct-24 19:37:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:37:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:37:42 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-24 19:37:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:37:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-24 19:37:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:37:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:37:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:37:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85063.00 2008-Oct-24 19:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.067 (still bad) 2008-Oct-24 19:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.521 (still bad) 2008-Oct-24 19:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.521 (still bad) 2008-Oct-24 19:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.521 (still bad) 2008-Oct-24 19:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.521 (still bad) 2008-Oct-24 19:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.521 (still bad) 2008-Oct-24 19:37:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:37:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:37:53 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-24 19:37:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:37:53 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-24 19:37:53 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-24 19:37:53 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-24 19:37:53 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-24 19:37:53 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:37:53 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:37:53 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:37:53 LOG2 antvel: Parameters to Doppler: Topocentric 85073 2008 298 0.0 2008-Oct-24 19:37:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:37:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-24 19:37:53 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-24 19:37:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:37:53 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:37:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-24 19:37:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:37:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:37:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:37:53 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-24 19:37:53 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.430196 2008.8181190267953 18.999933 2008-Oct-24 19:37:53 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000059 9.490000000000000 2008-Oct-24 19:37:53 LOG4 log_alfabeam: ALFABEAM 1 21.399102989244223 9.595301299650126 2008-Oct-24 19:37:53 LOG4 log_alfabeam: ALFABEAM 2 21.394274485720310 9.528362444348522 2008-Oct-24 19:37:53 LOG4 log_alfabeam: ALFABEAM 3 21.395126893408097 9.422957754009216 2008-Oct-24 19:37:53 LOG4 log_alfabeam: ALFABEAM 4 21.400924249523882 9.384716814501196 2008-Oct-24 19:37:53 LOG4 log_alfabeam: ALFABEAM 5 21.405771924916362 9.452429384966997 2008-Oct-24 19:37:53 LOG4 log_alfabeam: ALFABEAM 6 21.404803119671875 9.557602437437133 2008-Oct-24 19:37:53 INFO2 take_data: Starting WAPP+GALFA scan: 829800148 2008-Oct-24 19:37:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:37:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:37:54 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-24 19:37:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:37:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-24 19:37:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:37:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:37:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:37:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85075.00 2008-Oct-24 19:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.521 (still bad) 2008-Oct-24 19:37:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:37:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:37:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:37:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:37:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:37:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:37:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:37:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:37:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.516 (still bad) 2008-Oct-24 19:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.514 (still bad) 2008-Oct-24 19:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.515 (still bad) 2008-Oct-24 19:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.517 (still bad) 2008-Oct-24 19:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.512 (still bad) 2008-Oct-24 19:38:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:38:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:38:05 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-24 19:38:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:38:05 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-24 19:38:05 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-24 19:38:05 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-24 19:38:05 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-24 19:38:05 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:38:05 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:38:05 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:38:05 LOG2 antvel: Parameters to Doppler: Topocentric 85085 2008 298 0.0 2008-Oct-24 19:38:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:38:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-24 19:38:05 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-24 19:38:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:38:05 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:38:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-24 19:38:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:38:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:38:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:38:05 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-24 19:38:05 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.433539 2008.8181194070523 18.999933 2008-Oct-24 19:38:05 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000059 9.490000000000000 2008-Oct-24 19:38:05 LOG4 log_alfabeam: ALFABEAM 1 21.399141480821797 9.595371488751141 2008-Oct-24 19:38:05 LOG4 log_alfabeam: ALFABEAM 2 21.394288576622319 9.528819633610702 2008-Oct-24 19:38:05 LOG4 log_alfabeam: ALFABEAM 3 21.395102482067337 9.423348344269931 2008-Oct-24 19:38:05 LOG4 log_alfabeam: ALFABEAM 4 21.400885781314617 9.384644442319319 2008-Oct-24 19:38:05 LOG4 log_alfabeam: ALFABEAM 5 21.405758107136766 9.451968289311962 2008-Oct-24 19:38:05 LOG4 log_alfabeam: ALFABEAM 6 21.404827757089425 9.557217303382730 2008-Oct-24 19:38:05 INFO2 take_data: Starting WAPP+GALFA scan: 829800149 2008-Oct-24 19:38:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:38:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:38:06 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-24 19:38:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:38:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-24 19:38:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:38:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:38:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:38:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85087.00 2008-Oct-24 19:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.512 (still bad) 2008-Oct-24 19:38:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:38:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:38:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:38:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:38:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:38:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:38:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:38:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:38:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.508 (still bad) 2008-Oct-24 19:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.508 (still bad) 2008-Oct-24 19:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.508 (still bad) 2008-Oct-24 19:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.511 (still bad) 2008-Oct-24 19:38:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:38:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:38:17 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-24 19:38:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:38:17 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-24 19:38:17 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-24 19:38:17 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-24 19:38:17 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-24 19:38:17 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:38:17 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:38:17 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:38:17 LOG2 antvel: Parameters to Doppler: Topocentric 85097 2008 298 0.0 2008-Oct-24 19:38:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:38:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-24 19:38:17 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-24 19:38:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:38:17 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:38:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-24 19:38:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:38:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:38:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:38:17 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-24 19:38:17 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.436881 2008.8181197873096 18.999933 2008-Oct-24 19:38:17 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000063 9.490000000000000 2008-Oct-24 19:38:17 LOG4 log_alfabeam: ALFABEAM 1 21.399179966846326 9.595438547447040 2008-Oct-24 19:38:17 LOG4 log_alfabeam: ALFABEAM 2 21.394302822370069 9.529275320236806 2008-Oct-24 19:38:17 LOG4 log_alfabeam: ALFABEAM 3 21.395078233747562 9.423740562374000 2008-Oct-24 19:38:17 LOG4 log_alfabeam: ALFABEAM 4 21.400847317035467 9.384575200487756 2008-Oct-24 19:38:17 LOG4 log_alfabeam: ALFABEAM 5 21.405744131432364 9.451508653762604 2008-Oct-24 19:38:17 LOG4 log_alfabeam: ALFABEAM 6 21.404852235274301 9.556830499778220 2008-Oct-24 19:38:17 INFO2 take_data: Starting WAPP+GALFA scan: 829800150 2008-Oct-24 19:38:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:38:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:38:18 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-24 19:38:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:38:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-24 19:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.508 (still bad) 2008-Oct-24 19:38:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:38:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:38:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:38:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85099.00 2008-Oct-24 19:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:38:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.508 (still bad) 2008-Oct-24 19:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.497 (still bad) 2008-Oct-24 19:38:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:38:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.493 1.400 1.362 1.214 2008-Oct-24 19:38:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.285 1.250 1.328 1.477 2008-Oct-24 19:38:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.378 1.451 1.391 1.399 2008-Oct-24 19:38:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.496 0.099 1.316 0.110 2008-Oct-24 19:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.495 (still bad) 2008-Oct-24 19:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.498 (still bad) 2008-Oct-24 19:38:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:38:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:38:29 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-24 19:38:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:38:29 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-24 19:38:29 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-24 19:38:29 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-24 19:38:29 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-24 19:38:29 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:38:29 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:38:29 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:38:29 LOG2 antvel: Parameters to Doppler: Topocentric 85109 2008 298 0.0 2008-Oct-24 19:38:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:38:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-24 19:38:29 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-24 19:38:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:38:29 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:38:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-24 19:38:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:38:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:38:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:38:29 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-24 19:38:29 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.440224 2008.8181201675666 18.999933 2008-Oct-24 19:38:29 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000077 9.489999999999998 2008-Oct-24 19:38:29 LOG4 log_alfabeam: ALFABEAM 1 21.399218466836793 9.595502514681344 2008-Oct-24 19:38:29 LOG4 log_alfabeam: ALFABEAM 2 21.394317229933652 9.529729737756584 2008-Oct-24 19:38:29 LOG4 log_alfabeam: ALFABEAM 3 21.395054135892380 9.424134604396993 2008-Oct-24 19:38:29 LOG4 log_alfabeam: ALFABEAM 4 21.400808837179010 9.384509049157272 2008-Oct-24 19:38:29 LOG4 log_alfabeam: ALFABEAM 5 21.405729990949535 9.451050243214896 2008-Oct-24 19:38:29 LOG4 log_alfabeam: ALFABEAM 6 21.404876566872389 9.556441832857303 2008-Oct-24 19:38:29 INFO2 take_data: Starting WAPP+GALFA scan: 829800151 2008-Oct-24 19:38:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:38:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:38:30 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-24 19:38:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:38:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-24 19:38:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:38:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:38:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.496 (still bad) 2008-Oct-24 19:38:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85111.00 2008-Oct-24 19:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.496 (still bad) 2008-Oct-24 19:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.482 (still bad) 2008-Oct-24 19:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.481 (still bad) 2008-Oct-24 19:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.480 (still bad) 2008-Oct-24 19:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.484 (still bad) 2008-Oct-24 19:38:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:38:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:38:41 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-24 19:38:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:38:41 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-24 19:38:41 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-24 19:38:41 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-24 19:38:41 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-24 19:38:41 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:38:41 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:38:41 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:38:41 LOG2 antvel: Parameters to Doppler: Topocentric 85121 2008 298 0.0 2008-Oct-24 19:38:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:38:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-24 19:38:41 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-24 19:38:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:38:41 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:38:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-24 19:38:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:38:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:38:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:38:41 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-24 19:38:41 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.443566 2008.8181205478236 18.999933 2008-Oct-24 19:38:41 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000059 9.490000000000002 2008-Oct-24 19:38:41 LOG4 log_alfabeam: ALFABEAM 1 21.399256954253687 9.595563351853672 2008-Oct-24 19:38:41 LOG4 log_alfabeam: ALFABEAM 2 21.394331789098285 9.530182575599802 2008-Oct-24 19:38:41 LOG4 log_alfabeam: ALFABEAM 3 21.395030204826675 9.424530195562651 2008-Oct-24 19:38:41 LOG4 log_alfabeam: ALFABEAM 4 21.400770368271946 9.384446028634853 2008-Oct-24 19:38:41 LOG4 log_alfabeam: ALFABEAM 5 21.405715695699573 9.450593371430474 2008-Oct-24 19:38:41 LOG4 log_alfabeam: ALFABEAM 6 21.404900735370092 9.556051573266835 2008-Oct-24 19:38:41 INFO2 take_data: Starting WAPP+GALFA scan: 829800152 2008-Oct-24 19:38:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:38:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:38:42 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-24 19:38:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:38:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-24 19:38:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:38:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:38:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:38:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85123.00 2008-Oct-24 19:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.481 (still bad) 2008-Oct-24 19:38:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:38:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:38:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:38:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:38:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:38:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:38:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:38:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:38:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.481 (still bad) 2008-Oct-24 19:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.482 (still bad) 2008-Oct-24 19:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.480 (still bad) 2008-Oct-24 19:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.480 (still bad) 2008-Oct-24 19:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.479 (still bad) 2008-Oct-24 19:38:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:38:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:38:53 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-24 19:38:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:38:53 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-24 19:38:53 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-24 19:38:53 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-24 19:38:53 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-24 19:38:53 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:38:53 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:38:53 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:38:53 LOG2 antvel: Parameters to Doppler: Topocentric 85133 2008 298 0.0 2008-Oct-24 19:38:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:38:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-24 19:38:53 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-24 19:38:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:38:53 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:38:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-24 19:38:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:38:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:38:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:38:53 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-24 19:38:53 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.446909 2008.8181209280806 18.999933 2008-Oct-24 19:38:53 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000034 9.489999999999997 2008-Oct-24 19:38:53 LOG4 log_alfabeam: ALFABEAM 1 21.399295448628497 9.595621095894419 2008-Oct-24 19:38:53 LOG4 log_alfabeam: ALFABEAM 2 21.394346506941403 9.530634066506952 2008-Oct-24 19:38:53 LOG4 log_alfabeam: ALFABEAM 3 21.395006428089825 9.424927533173545 2008-Oct-24 19:38:53 LOG4 log_alfabeam: ALFABEAM 4 21.400731890793551 9.384386101082489 2008-Oct-24 19:38:53 LOG4 log_alfabeam: ALFABEAM 5 21.405701238720543 9.450137804070865 2008-Oct-24 19:38:53 LOG4 log_alfabeam: ALFABEAM 6 21.404924753319531 9.555659525998163 2008-Oct-24 19:38:53 INFO2 take_data: Starting WAPP+GALFA scan: 829800153 2008-Oct-24 19:38:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:38:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:38:54 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-24 19:38:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:38:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-24 19:38:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:38:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:38:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:38:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85135.00 2008-Oct-24 19:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.480 (still bad) 2008-Oct-24 19:38:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:38:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:38:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:38:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:38:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:38:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:38:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:38:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:38:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.481 (still bad) 2008-Oct-24 19:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.481 (still bad) 2008-Oct-24 19:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.482 (still bad) 2008-Oct-24 19:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.483 (still bad) 2008-Oct-24 19:39:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:39:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:39:05 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-24 19:39:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:39:05 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-24 19:39:05 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Oct-24 19:39:05 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-24 19:39:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-24 19:39:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-24 19:39:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-24 19:39:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 19:39:05 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-24 19:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.481 (still bad) 2008-Oct-24 19:39:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 19:39:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 19:39:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 19:39:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 19:39:05 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-24 19:39:05 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-24 19:39:05 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-24 19:39:05 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-24 19:39:05 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-24 19:39:05 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:39:05 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:39:05 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:39:05 LOG2 antvel: Parameters to Doppler: Topocentric 85145 2008 298 0.0 2008-Oct-24 19:39:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:39:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-24 19:39:05 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-24 19:39:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:39:05 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:39:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-24 19:39:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:39:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:39:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:39:05 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-24 19:39:05 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.450251 2008.8181213083376 18.999933 2008-Oct-24 19:39:05 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000027 9.489999999999998 2008-Oct-24 19:39:05 LOG4 log_alfabeam: ALFABEAM 1 21.399333923439659 9.595675713630568 2008-Oct-24 19:39:05 LOG4 log_alfabeam: ALFABEAM 2 21.394361372983770 9.531083902606067 2008-Oct-24 19:39:05 LOG4 log_alfabeam: ALFABEAM 3 21.394982821719317 9.425326339728606 2008-Oct-24 19:39:05 LOG4 log_alfabeam: ALFABEAM 4 21.400693431255611 9.384329301377305 2008-Oct-24 19:39:05 LOG4 log_alfabeam: ALFABEAM 5 21.405686630294294 9.449683852275522 2008-Oct-24 19:39:05 LOG4 log_alfabeam: ALFABEAM 6 21.404948604487185 9.555265964508830 2008-Oct-24 19:39:05 INFO2 take_data: Starting WAPP+GALFA scan: 829800154 2008-Oct-24 19:39:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:39:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:39:06 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-24 19:39:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:39:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-24 19:39:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:39:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:39:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:39:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85147.00 2008-Oct-24 19:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.457 (still bad) 2008-Oct-24 19:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2008-Oct-24 19:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2008-Oct-24 19:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2008-Oct-24 19:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2008-Oct-24 19:39:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:39:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:39:17 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-24 19:39:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:39:17 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-24 19:39:17 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-24 19:39:17 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-24 19:39:17 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-24 19:39:17 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:39:17 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:39:17 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:39:17 LOG2 antvel: Parameters to Doppler: Topocentric 85157 2008 298 0.0 2008-Oct-24 19:39:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:39:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-24 19:39:17 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-24 19:39:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:39:17 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:39:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-24 19:39:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:39:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:39:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:39:17 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-24 19:39:17 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.453594 2008.8181216885948 18.999933 2008-Oct-24 19:39:17 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000048 9.490000000000002 2008-Oct-24 19:39:17 LOG4 log_alfabeam: ALFABEAM 1 21.399372398228934 9.595727239968832 2008-Oct-24 19:39:17 LOG4 log_alfabeam: ALFABEAM 2 21.394376394409456 9.531532315820265 2008-Oct-24 19:39:17 LOG4 log_alfabeam: ALFABEAM 3 21.394959373352563 9.425726813739804 2008-Oct-24 19:39:17 LOG4 log_alfabeam: ALFABEAM 4 21.400654970126638 9.384275593703105 2008-Oct-24 19:39:17 LOG4 log_alfabeam: ALFABEAM 5 21.405671863351049 9.449231282499534 2008-Oct-24 19:39:17 LOG4 log_alfabeam: ALFABEAM 6 21.404972301329771 9.554870692565247 2008-Oct-24 19:39:17 INFO2 take_data: Starting WAPP+GALFA scan: 829800155 2008-Oct-24 19:39:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:39:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:39:18 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-24 19:39:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:39:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-24 19:39:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:39:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:39:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:39:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85159.00 2008-Oct-24 19:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2008-Oct-24 19:39:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:39:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:39:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:39:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:39:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:39:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:39:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:39:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:39:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2008-Oct-24 19:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2008-Oct-24 19:39:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:39:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.042 1.018 0.903 2008-Oct-24 19:39:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.917 0.980 1.084 2008-Oct-24 19:39:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.007 1.054 1.026 1.067 2008-Oct-24 19:39:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.099 0.953 0.110 2008-Oct-24 19:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.093 (still bad) 2008-Oct-24 19:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2008-Oct-24 19:39:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:39:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:39:29 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-24 19:39:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:39:29 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-24 19:39:29 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-24 19:39:29 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-24 19:39:29 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-24 19:39:29 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:39:29 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:39:29 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:39:29 LOG2 antvel: Parameters to Doppler: Topocentric 85169 2008 298 0.0 2008-Oct-24 19:39:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:39:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-24 19:39:29 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-24 19:39:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:39:29 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:39:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-24 19:39:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:39:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:39:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:39:29 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-24 19:39:29 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.456936 2008.8181220688518 18.999933 2008-Oct-24 19:39:29 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000027 9.490000000000000 2008-Oct-24 19:39:29 LOG4 log_alfabeam: ALFABEAM 1 21.399410846507294 9.595775647145850 2008-Oct-24 19:39:29 LOG4 log_alfabeam: ALFABEAM 2 21.394391560482440 9.531979001127880 2008-Oct-24 19:39:29 LOG4 log_alfabeam: ALFABEAM 3 21.394936098732302 9.426128675154146 2008-Oct-24 19:39:29 LOG4 log_alfabeam: ALFABEAM 4 21.400616533888630 9.384225007522794 2008-Oct-24 19:39:29 LOG4 log_alfabeam: ALFABEAM 5 21.405656948435610 9.448780403103953 2008-Oct-24 19:39:29 LOG4 log_alfabeam: ALFABEAM 6 21.404995827901502 9.554473986266828 2008-Oct-24 19:39:29 INFO2 take_data: Starting WAPP+GALFA scan: 829800156 2008-Oct-24 19:39:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:39:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:39:30 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-24 19:39:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:39:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-24 19:39:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:39:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:39:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:39:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85171.00 2008-Oct-24 19:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2008-Oct-24 19:39:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:39:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:39:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:39:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:39:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:39:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:39:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:39:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:39:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2008-Oct-24 19:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2008-Oct-24 19:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2008-Oct-24 19:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2008-Oct-24 19:39:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:39:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:39:41 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-24 19:39:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:39:41 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-24 19:39:41 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-24 19:39:41 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-24 19:39:41 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-24 19:39:41 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:39:41 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:39:41 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:39:41 LOG2 antvel: Parameters to Doppler: Topocentric 85181 2008 298 0.0 2008-Oct-24 19:39:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:39:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-24 19:39:41 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-24 19:39:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:39:41 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:39:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-24 19:39:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:39:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:39:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:39:41 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-24 19:39:41 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.460278 2008.8181224491088 18.999933 2008-Oct-24 19:39:41 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000045 9.490000000000004 2008-Oct-24 19:39:41 LOG4 log_alfabeam: ALFABEAM 1 21.399449276328678 9.595820954939491 2008-Oct-24 19:39:41 LOG4 log_alfabeam: ALFABEAM 2 21.394406873889075 9.532424056682475 2008-Oct-24 19:39:41 LOG4 log_alfabeam: ALFABEAM 3 21.394912992484237 9.426532002775390 2008-Oct-24 19:39:41 LOG4 log_alfabeam: ALFABEAM 4 21.400578114494209 9.384177522798277 2008-Oct-24 19:39:41 LOG4 log_alfabeam: ALFABEAM 5 21.405641882900969 9.448331115561230 2008-Oct-24 19:39:41 LOG4 log_alfabeam: ALFABEAM 6 21.405019189595912 9.554075767550632 2008-Oct-24 19:39:41 INFO2 take_data: Starting WAPP+GALFA scan: 829800157 2008-Oct-24 19:39:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:39:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:39:42 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-24 19:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2008-Oct-24 19:39:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:39:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-24 19:39:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:39:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:39:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:39:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85183.00 2008-Oct-24 19:39:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:39:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:39:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:39:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:39:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:39:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:39:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:39:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2008-Oct-24 19:39:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.076 (still bad) 2008-Oct-24 19:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.077 (still bad) 2008-Oct-24 19:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.077 (still bad) 2008-Oct-24 19:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.078 (still bad) 2008-Oct-24 19:39:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:39:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:39:53 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-24 19:39:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:39:53 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-24 19:39:53 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-24 19:39:53 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-24 19:39:53 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-24 19:39:53 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:39:53 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:39:53 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:39:53 LOG2 antvel: Parameters to Doppler: Topocentric 85193 2008 298 0.0 2008-Oct-24 19:39:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:39:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-24 19:39:53 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-24 19:39:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:39:53 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:39:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-24 19:39:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:39:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:39:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:39:53 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-24 19:39:53 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.463621 2008.8181228293658 18.999933 2008-Oct-24 19:39:53 LOG4 log_alfabeam: ALFABEAM 0 21.399999999999995 9.489999999999998 2008-Oct-24 19:39:53 LOG4 log_alfabeam: ALFABEAM 1 21.399487695738937 9.595863180250605 2008-Oct-24 19:39:53 LOG4 log_alfabeam: ALFABEAM 2 21.394422337456721 9.532867579227759 2008-Oct-24 19:39:53 LOG4 log_alfabeam: ALFABEAM 3 21.394890049384720 9.426936876873960 2008-Oct-24 19:39:53 LOG4 log_alfabeam: ALFABEAM 4 21.400539703902588 9.384133122368864 2008-Oct-24 19:39:53 LOG4 log_alfabeam: ALFABEAM 5 21.405626663956394 9.447883322718990 2008-Oct-24 19:39:53 LOG4 log_alfabeam: ALFABEAM 6 21.405042391658228 9.553675956851379 2008-Oct-24 19:39:53 INFO2 take_data: Starting WAPP+GALFA scan: 829800158 2008-Oct-24 19:39:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:39:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:39:54 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-24 19:39:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:39:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-24 19:39:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:39:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:39:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.076 (still bad) 2008-Oct-24 19:39:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85195.00 2008-Oct-24 19:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:39:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.075 (still bad) 2008-Oct-24 19:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.066 (still bad) 2008-Oct-24 19:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.066 (still bad) 2008-Oct-24 19:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.067 (still bad) 2008-Oct-24 19:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.067 (still bad) 2008-Oct-24 19:40:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:40:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:40:05 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-24 19:40:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:40:05 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-24 19:40:05 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-24 19:40:05 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-24 19:40:05 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-24 19:40:05 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:40:05 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:40:05 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:40:05 LOG2 antvel: Parameters to Doppler: Topocentric 85205 2008 298 0.0 2008-Oct-24 19:40:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:40:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-24 19:40:05 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-24 19:40:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:40:05 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:40:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-24 19:40:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:40:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:40:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:40:05 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-24 19:40:05 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.466963 2008.8181232096229 18.999933 2008-Oct-24 19:40:05 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000052 9.489999999999998 2008-Oct-24 19:40:05 LOG4 log_alfabeam: ALFABEAM 1 21.399526078325238 9.595902303377301 2008-Oct-24 19:40:05 LOG4 log_alfabeam: ALFABEAM 2 21.394437940079474 9.533309268289381 2008-Oct-24 19:40:05 LOG4 log_alfabeam: ALFABEAM 3 21.394867284723560 9.427343013899552 2008-Oct-24 19:40:05 LOG4 log_alfabeam: ALFABEAM 4 21.400501328524648 9.384091827625795 2008-Oct-24 19:40:05 LOG4 log_alfabeam: ALFABEAM 5 21.405611302526630 9.447437328490697 2008-Oct-24 19:40:05 LOG4 log_alfabeam: ALFABEAM 6 21.405065418586851 9.553274833907597 2008-Oct-24 19:40:05 INFO2 take_data: Starting WAPP+GALFA scan: 829800159 2008-Oct-24 19:40:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:40:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:40:06 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-24 19:40:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:40:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-24 19:40:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:40:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:40:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:40:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85207.00 2008-Oct-24 19:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.066 (still bad) 2008-Oct-24 19:40:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:40:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:40:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:40:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:40:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:40:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:40:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:40:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:40:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.065 (still bad) 2008-Oct-24 19:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.065 (still bad) 2008-Oct-24 19:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.065 (still bad) 2008-Oct-24 19:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.065 (still bad) 2008-Oct-24 19:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.064 (still bad) 2008-Oct-24 19:40:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:40:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:40:17 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-24 19:40:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:40:17 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-24 19:40:17 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-24 19:40:17 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-24 19:40:17 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-24 19:40:17 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:40:17 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:40:17 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:40:17 LOG2 antvel: Parameters to Doppler: Topocentric 85217 2008 298 0.0 2008-Oct-24 19:40:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:40:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-24 19:40:17 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-24 19:40:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:40:17 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:40:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-24 19:40:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:40:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-24 19:40:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:40:17 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-24 19:40:17 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.470306 2008.8181235898801 18.999933 2008-Oct-24 19:40:17 LOG4 log_alfabeam: ALFABEAM 0 21.399999999999995 9.490000000000000 2008-Oct-24 19:40:17 LOG4 log_alfabeam: ALFABEAM 1 21.399564443645087 9.595938354115065 2008-Oct-24 19:40:17 LOG4 log_alfabeam: ALFABEAM 2 21.394453689206063 9.533749353616972 2008-Oct-24 19:40:17 LOG4 log_alfabeam: ALFABEAM 3 21.394844686390069 9.427750615309499 2008-Oct-24 19:40:17 LOG4 log_alfabeam: ALFABEAM 4 21.400462968810597 9.384053607859590 2008-Oct-24 19:40:17 LOG4 log_alfabeam: ALFABEAM 5 21.405595791273679 9.446992901444508 2008-Oct-24 19:40:17 LOG4 log_alfabeam: ALFABEAM 6 21.405088282591020 9.552872199500150 2008-Oct-24 19:40:17 INFO2 take_data: Starting WAPP+GALFA scan: 829800160 2008-Oct-24 19:40:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:40:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:40:18 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-24 19:40:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:40:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-24 19:40:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:40:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:40:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:40:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85219.00 2008-Oct-24 19:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.064 (still bad) 2008-Oct-24 19:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.065 (still bad) 2008-Oct-24 19:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.063 (still bad) 2008-Oct-24 19:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.062 (still bad) 2008-Oct-24 19:40:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:40:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 1.015 0.982 0.882 2008-Oct-24 19:40:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.898 0.935 1.061 2008-Oct-24 19:40:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.976 1.035 0.965 1.031 2008-Oct-24 19:40:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.099 0.936 0.109 2008-Oct-24 19:40:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.063 (still bad) 2008-Oct-24 19:40:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:40:29 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-24 19:40:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:40:29 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-24 19:40:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-24 19:40:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-24 19:40:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-24 19:40:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 19:40:29 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-24 19:40:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 19:40:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-24 19:40:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 19:40:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 19:40:29 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-24 19:40:29 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-24 19:40:29 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-24 19:40:29 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-24 19:40:29 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:40:29 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:40:29 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:40:29 LOG2 antvel: Parameters to Doppler: Topocentric 85229 2008 298 0.0 2008-Oct-24 19:40:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:40:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-24 19:40:29 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-24 19:40:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:40:29 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:40:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-24 19:40:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:40:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:40:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:40:29 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-24 19:40:29 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.473648 2008.8181239701371 18.999933 2008-Oct-24 19:40:29 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000020 9.490000000000004 2008-Oct-24 19:40:29 LOG4 log_alfabeam: ALFABEAM 1 21.399602765353976 9.595971318088750 2008-Oct-24 19:40:29 LOG4 log_alfabeam: ALFABEAM 2 21.394469573494703 9.534187537940074 2008-Oct-24 19:40:29 LOG4 log_alfabeam: ALFABEAM 3 21.394822269364898 9.428159395445656 2008-Oct-24 19:40:29 LOG4 log_alfabeam: ALFABEAM 4 21.400424651106452 9.384018479125727 2008-Oct-24 19:40:29 LOG4 log_alfabeam: ALFABEAM 5 21.405580141365412 9.446550342350960 2008-Oct-24 19:40:29 LOG4 log_alfabeam: ALFABEAM 6 21.405110968472545 9.552468335574115 2008-Oct-24 19:40:29 INFO2 take_data: Starting WAPP+GALFA scan: 829800161 2008-Oct-24 19:40:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:40:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:40:30 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-24 19:40:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:40:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-24 19:40:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:40:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:40:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:40:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85231.00 2008-Oct-24 19:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.062 (still bad) 2008-Oct-24 19:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:40:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.511 (still bad) 2008-Oct-24 19:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.510 (still bad) 2008-Oct-24 19:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.510 (still bad) 2008-Oct-24 19:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.511 (still bad) 2008-Oct-24 19:40:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:40:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:40:41 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-24 19:40:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:40:41 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-24 19:40:41 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-24 19:40:41 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-24 19:40:41 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-24 19:40:41 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:40:41 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:40:41 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:40:41 LOG2 antvel: Parameters to Doppler: Topocentric 85241 2008 298 0.0 2008-Oct-24 19:40:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:40:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-24 19:40:41 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-24 19:40:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:40:41 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:40:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-24 19:40:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:40:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:40:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:40:41 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-24 19:40:41 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.476991 2008.8181243503941 18.999933 2008-Oct-24 19:40:41 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000013 9.489999999999995 2008-Oct-24 19:40:41 LOG4 log_alfabeam: ALFABEAM 1 21.399641063011892 9.596001223026315 2008-Oct-24 19:40:41 LOG4 log_alfabeam: ALFABEAM 2 21.394485600499340 9.534624050083753 2008-Oct-24 19:40:41 LOG4 log_alfabeam: ALFABEAM 3 21.394800021641540 9.428569556911231 2008-Oct-24 19:40:41 LOG4 log_alfabeam: ALFABEAM 4 21.400386355859158 9.383986412780498 2008-Oct-24 19:40:41 LOG4 log_alfabeam: ALFABEAM 5 21.405564345357135 9.446109420678177 2008-Oct-24 19:40:41 LOG4 log_alfabeam: ALFABEAM 6 21.405133488338535 9.552063041747722 2008-Oct-24 19:40:41 INFO2 take_data: Starting WAPP+GALFA scan: 829800162 2008-Oct-24 19:40:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:40:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:40:42 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-24 19:40:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:40:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-24 19:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.509 (still bad) 2008-Oct-24 19:40:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:40:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:40:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:40:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85243.00 2008-Oct-24 19:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.510 (still bad) 2008-Oct-24 19:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.505 (still bad) 2008-Oct-24 19:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.506 (still bad) 2008-Oct-24 19:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.506 (still bad) 2008-Oct-24 19:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.506 (still bad) 2008-Oct-24 19:40:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:40:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:40:53 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-24 19:40:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:40:53 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-24 19:40:53 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-24 19:40:53 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-24 19:40:53 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-24 19:40:53 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:40:53 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81812 J 2008-Oct-24 19:40:53 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:40:53 LOG2 antvel: Parameters to Doppler: Topocentric 85253 2008 298 0.0 2008-Oct-24 19:40:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:40:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-24 19:40:53 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-24 19:40:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:40:53 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:40:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-24 19:40:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:40:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:40:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:40:53 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-24 19:40:53 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.480333 2008.8181247306511 18.999933 2008-Oct-24 19:40:53 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000016 9.489999999999997 2008-Oct-24 19:40:53 LOG4 log_alfabeam: ALFABEAM 1 21.399679310356312 9.596028059831051 2008-Oct-24 19:40:53 LOG4 log_alfabeam: ALFABEAM 2 21.394501758650538 9.535058596111517 2008-Oct-24 19:40:53 LOG4 log_alfabeam: ALFABEAM 3 21.394777957886159 9.428980812121484 2008-Oct-24 19:40:53 LOG4 log_alfabeam: ALFABEAM 4 21.400348109335347 9.383957419590139 2008-Oct-24 19:40:53 LOG4 log_alfabeam: ALFABEAM 5 21.405548414650763 9.445670433919291 2008-Oct-24 19:40:53 LOG4 log_alfabeam: ALFABEAM 6 21.405155827299286 9.551656601994580 2008-Oct-24 19:40:53 INFO2 take_data: Starting WAPP+GALFA scan: 829800163 2008-Oct-24 19:40:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:40:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:40:54 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-24 19:40:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:40:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-24 19:40:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:40:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:40:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.502 (still bad) 2008-Oct-24 19:40:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85255.00 2008-Oct-24 19:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.500 (still bad) 2008-Oct-24 19:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.500 (still bad) 2008-Oct-24 19:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.500 (still bad) 2008-Oct-24 19:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.500 (still bad) 2008-Oct-24 19:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.500 (still bad) 2008-Oct-24 19:41:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:41:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:41:05 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-24 19:41:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:41:05 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-24 19:41:05 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-24 19:41:05 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-24 19:41:05 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-24 19:41:05 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:41:05 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81813 J 2008-Oct-24 19:41:05 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:41:05 LOG2 antvel: Parameters to Doppler: Topocentric 85265 2008 298 0.0 2008-Oct-24 19:41:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:41:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-24 19:41:05 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-24 19:41:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:41:05 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:41:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-24 19:41:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:41:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:41:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:41:05 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-24 19:41:05 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.483676 2008.8181251109081 18.999933 2008-Oct-24 19:41:05 LOG4 log_alfabeam: ALFABEAM 0 21.399999999999999 9.489999999999993 2008-Oct-24 19:41:05 LOG4 log_alfabeam: ALFABEAM 1 21.399717526947256 9.596051854149284 2008-Oct-24 19:41:05 LOG4 log_alfabeam: ALFABEAM 2 21.394518055607406 9.535491403890560 2008-Oct-24 19:41:05 LOG4 log_alfabeam: ALFABEAM 3 21.394756066198738 9.429393364806181 2008-Oct-24 19:41:05 LOG4 log_alfabeam: ALFABEAM 4 21.400309891981443 9.383931472990895 2008-Oct-24 19:41:05 LOG4 log_alfabeam: ALFABEAM 5 21.405532341695583 9.445233152475581 2008-Oct-24 19:41:05 LOG4 log_alfabeam: ALFABEAM 6 21.405177997357889 9.551248814789083 2008-Oct-24 19:41:05 INFO2 take_data: Starting WAPP+GALFA scan: 829800164 2008-Oct-24 19:41:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:41:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:41:06 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-24 19:41:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:41:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-24 19:41:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:41:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:41:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:41:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85267.00 2008-Oct-24 19:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.499 (still bad) 2008-Oct-24 19:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.494 (still bad) 2008-Oct-24 19:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.492 (still bad) 2008-Oct-24 19:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.492 (still bad) 2008-Oct-24 19:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.495 (still bad) 2008-Oct-24 19:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.491 (still bad) 2008-Oct-24 19:41:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:41:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:41:17 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-24 19:41:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:41:17 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-24 19:41:17 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-24 19:41:17 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-24 19:41:17 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-24 19:41:17 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:41:17 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81813 J 2008-Oct-24 19:41:17 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:41:17 LOG2 antvel: Parameters to Doppler: Topocentric 85277 2008 298 0.0 2008-Oct-24 19:41:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:41:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-24 19:41:17 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-24 19:41:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:41:17 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:41:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-24 19:41:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:41:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:41:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:41:17 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-24 19:41:17 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.487018 2008.8181254911653 18.999933 2008-Oct-24 19:41:17 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000013 9.489999999999998 2008-Oct-24 19:41:17 LOG4 log_alfabeam: ALFABEAM 1 21.399755686617976 9.596072602106316 2008-Oct-24 19:41:17 LOG4 log_alfabeam: ALFABEAM 2 21.394534479582166 9.535922182941309 2008-Oct-24 19:41:17 LOG4 log_alfabeam: ALFABEAM 3 21.394734360926666 9.429806925636171 2008-Oct-24 19:41:17 LOG4 log_alfabeam: ALFABEAM 4 21.400271729971248 9.383908578514411 2008-Oct-24 19:41:17 LOG4 log_alfabeam: ALFABEAM 5 21.405516138118770 9.444797870435131 2008-Oct-24 19:41:17 LOG4 log_alfabeam: ALFABEAM 6 21.405199983937951 9.550839965953985 2008-Oct-24 19:41:17 INFO2 take_data: Starting WAPP+GALFA scan: 829800165 2008-Oct-24 19:41:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:41:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:41:18 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-24 19:41:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:41:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-24 19:41:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:41:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:41:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:41:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85279.00 2008-Oct-24 19:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.491 (still bad) 2008-Oct-24 19:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.476 (still bad) 2008-Oct-24 19:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.477 (still bad) 2008-Oct-24 19:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.479 (still bad) 2008-Oct-24 19:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.481 (still bad) 2008-Oct-24 19:41:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:41:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:41:29 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-24 19:41:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:41:29 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-24 19:41:29 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-24 19:41:29 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-24 19:41:29 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-24 19:41:29 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:41:29 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81813 J 2008-Oct-24 19:41:29 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:41:29 LOG2 antvel: Parameters to Doppler: Topocentric 85289 2008 298 0.0 2008-Oct-24 19:41:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:41:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-24 19:41:29 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-24 19:41:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:41:29 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:41:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-24 19:41:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:41:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:41:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:41:29 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-24 19:41:29 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.490361 2008.8181258714224 18.999933 2008-Oct-24 19:41:29 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000048 9.489999999999995 2008-Oct-24 19:41:29 LOG4 log_alfabeam: ALFABEAM 1 21.399793808925978 9.596090327252282 2008-Oct-24 19:41:29 LOG4 log_alfabeam: ALFABEAM 2 21.394551038338317 9.536351160138540 2008-Oct-24 19:41:29 LOG4 log_alfabeam: ALFABEAM 3 21.394712830278294 9.430221699447678 2008-Oct-24 19:41:29 LOG4 log_alfabeam: ALFABEAM 4 21.400233603752881 9.383888711691572 2008-Oct-24 19:41:29 LOG4 log_alfabeam: ALFABEAM 5 21.405499796263676 9.444364359166741 2008-Oct-24 19:41:29 LOG4 log_alfabeam: ALFABEAM 6 21.405221798936463 9.550429852839381 2008-Oct-24 19:41:29 INFO2 take_data: Starting WAPP+GALFA scan: 829800166 2008-Oct-24 19:41:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:41:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:41:30 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-24 19:41:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:41:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-24 19:41:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:41:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.459 1.381 1.342 1.205 2008-Oct-24 19:41:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.283 1.243 1.305 1.464 2008-Oct-24 19:41:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.362 1.441 1.354 1.377 2008-Oct-24 19:41:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.479 0.099 1.301 0.109 2008-Oct-24 19:41:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:41:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:41:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:41:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85291.00 2008-Oct-24 19:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.479 (still bad) 2008-Oct-24 19:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.477 (still bad) 2008-Oct-24 19:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.478 (still bad) 2008-Oct-24 19:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.475 (still bad) 2008-Oct-24 19:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.477 (still bad) 2008-Oct-24 19:41:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:41:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:41:41 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-24 19:41:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:41:41 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-24 19:41:41 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-24 19:41:41 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-24 19:41:41 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-24 19:41:41 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:41:41 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81813 J 2008-Oct-24 19:41:41 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:41:41 LOG2 antvel: Parameters to Doppler: Topocentric 85301 2008 298 0.0 2008-Oct-24 19:41:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:41:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-24 19:41:41 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-24 19:41:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:41:41 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:41:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-24 19:41:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:41:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-24 19:41:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-24 19:41:41 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-24 19:41:41 LOG5 log_alfabeam: Parameters: 21.399999999999999 9.4899999999999984 21.493703 2008.8181262516794 18.999933 2008-Oct-24 19:41:41 LOG4 log_alfabeam: ALFABEAM 0 21.400000000000020 9.490000000000000 2008-Oct-24 19:41:41 LOG4 log_alfabeam: ALFABEAM 1 21.399831867813418 9.596105030870200 2008-Oct-24 19:41:41 LOG4 log_alfabeam: ALFABEAM 2 21.394567719879088 9.536778048575380 2008-Oct-24 19:41:41 LOG4 log_alfabeam: ALFABEAM 3 21.394691488278497 9.430637395350033 2008-Oct-24 19:41:41 LOG4 log_alfabeam: ALFABEAM 4 21.400195539394126 9.383871872882088 2008-Oct-24 19:41:41 LOG4 log_alfabeam: ALFABEAM 5 21.405483327973577 9.443932909233030 2008-Oct-24 19:41:41 LOG4 log_alfabeam: ALFABEAM 6 21.405243428094437 9.550018762936789 2008-Oct-24 19:41:41 INFO2 take_data: Starting WAPP+GALFA scan: 829800167 2008-Oct-24 19:41:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-24 19:41:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-24 19:41:42 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-24 19:41:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:41:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-24 19:41:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:41:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:41:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.476 (still bad) 2008-Oct-24 19:41:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85303.00 2008-Oct-24 19:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.476 (still bad) 2008-Oct-24 19:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.476 (still bad) 2008-Oct-24 19:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.477 (still bad) 2008-Oct-24 19:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.475 (still bad) 2008-Oct-24 19:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.479 (still bad) 2008-Oct-24 19:41:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:41:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-24 19:41:53 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-24 19:41:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-24 19:41:53 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-24 19:41:53 INFO2 smartfreq: Switching off CAL 2008-Oct-24 19:41:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-24 19:41:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-24 19:41:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 19:41:53 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-24 19:41:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 19:41:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 19:41:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 19:41:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 19:41:53 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-24 19:41:53 INFO3 restore_frequencies: Restoring original frequencies 2008-Oct-24 19:41:53 LOG5 antvel: Calling 'antvel 212400.000000 92924.000000 J 0' 2008-Oct-24 19:41:53 LOG2 antvel: Precessing RA = 21:24:00.0 Dec = +09:29:24.0 Epoch = 2008.81813 J 2008-Oct-24 19:41:53 LOG2 antvel: Computed apparent RA = 21:24:26.8 Dec = +09:31:50.3 2008-Oct-24 19:41:53 LOG2 antvel: Parameters to Doppler: Topocentric 85313 2008 298 0.0 2008-Oct-24 19:41:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:41:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-24 19:41:53 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-24 19:41:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:41:53 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:41:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-24 19:41:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:41:53 STOP finish_task: Finishing task 'smart frequency switching' 2008-Oct-24 19:41:53 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-24 19:41:53 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Oct-24 19:41:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:41:53 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Oct-24 19:41:53 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-24 19:41:53 NOTE run_command_file: DONE with command file processing 2008-Oct-24 19:41:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Oct-24 19:41:54 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Oct-24 19:41:54 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-24 19:41:54 DONE finish_task: DONE finished running: command file 'command_galfasrc' 2008-Oct-24 19:41:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:41:54 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'OK' 2008-Oct-24 19:41:54 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-24 19:41:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-24 19:41:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:41:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:41:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.477 (still bad) 2008-Oct-24 19:42:05 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-24 19:42:05 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-24 19:42:05 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-24 19:42:05 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-24 19:42:05 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-24 19:42:05 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-24 19:42:05 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-24 19:42:05 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-24 19:42:05 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-24 19:42:05 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-24 19:42:05 LOG3 exec_msg: Closing socket 2008-Oct-24 19:42:05 LOG3 exec_msg: Closing socket 2008-Oct-24 19:42:05 LOG3 exec_msg: Closing socket 2008-Oct-24 19:42:05 LOG3 exec_msg: Closing socket 2008-Oct-24 19:42:08 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-24 19:42:08 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-24 19:42:08 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-24 19:42:08 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-24 19:42:16 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-24 19:42:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-24 19:42:18 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-24 19:42:18 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-24 19:42:18 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-24 19:42:18 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-24 19:42:18 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-24 19:42:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-24 19:42:18 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-24 19:42:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 19:42:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-24 19:42:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 19:42:18 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-24 19:42:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 19:42:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 19:42:18 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-24 19:42:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 19:42:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-24 19:42:18 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-24 19:42:18 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-24 19:42:18 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-24 19:42:18 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-24 19:42:18 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-24 19:42:18 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-24 19:42:18 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-24 19:42:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-24 19:42:18 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-24 19:42:18 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-24 19:42:18 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-24 19:42:18 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-24 19:42:18 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-24 19:42:18 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-24 19:42:18 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-24 19:42:18 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-24 19:42:18 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-24 19:42:18 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-24 19:42:18 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-24 19:42:18 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-24 19:42:18 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-24 19:42:18 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-24 19:42:18 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-24 19:42:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:42:19 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-24 19:42:19 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-24 19:42:19 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-24 19:42:19 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-24 19:42:19 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-24 19:42:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-24 19:42:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:42:19 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-24 19:42:19 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-24 19:42:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-24 19:42:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-24 19:42:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:42:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:42:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:42:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:42:19 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-24 19:42:19 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-24 19:42:19 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-24 19:42:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-24 19:42:19 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-24 19:42:19 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-24 19:42:19 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-24 19:42:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:42:19 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-24 19:42:19 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-24 19:42:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-24 19:42:19 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-24 19:42:19 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-24 19:42:19 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-24 19:42:19 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-24 19:42:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-24 19:42:20 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-24 19:42:20 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-24 19:42:20 START begin_task: Starting task 'selecting calibration port' 2008-Oct-24 19:42:20 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-24 19:42:20 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-24 19:42:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-24 19:42:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:42:20 START begin_task: Starting task 'waiting on calport' 2008-Oct-24 19:42:20 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-24 19:42:20 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-24 19:42:20 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-24 19:42:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:42:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:42:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-24 19:42:20 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-24 19:42:20 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-24 19:42:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-24 19:42:20 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-24 19:42:20 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-24 19:42:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-24 19:42:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-24 19:42:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 19:42:20 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-24 19:42:20 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 19:42:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:42:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 19:42:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 19:42:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 19:42:20 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-24 19:42:20 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-24 19:42:20 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-24 19:42:20 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-24 19:42:20 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-24 19:42:20 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-24 19:42:20 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-24 19:42:20 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-24 19:42:20 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-24 19:42:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-24 19:42:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-24 19:42:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-24 19:42:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-24 19:42:20 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-24 19:42:20 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-24 19:42:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 19:42:20 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-24 19:42:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-24 19:42:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-24 19:42:20 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 19:42:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-24 19:42:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 19:42:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 19:42:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 19:42:20 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-24 19:42:20 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-24 19:42:20 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-24 19:42:20 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-24 19:42:20 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-24 19:42:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:42:21 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-24 19:42:21 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-24 19:42:21 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-24 19:42:21 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-24 19:42:21 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-24 19:42:21 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-24 19:42:21 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-24 19:42:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-24 19:42:21 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-24 19:42:21 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-24 19:42:21 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-24 19:42:21 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-24 19:42:21 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-24 19:42:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:42:21 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-24 19:42:21 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-24 19:42:21 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-24 19:42:22 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-24 19:42:22 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-24 19:42:29 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-24 19:42:29 LOG4 exec_msg: From OBSERVER: track_new_source drift39p2 213200.0 +092924 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-24 19:42:29 LOG1 track_new_source: Calling 'track_new_source drift39p2 213200.0 +092924 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-24 19:42:29 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-24 19:42:29 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-24 19:42:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift39p2} INFO {Selecting source 'drift39p2' ...} 2008-Oct-24 19:42:29 LOG3 track_source: Calling 'track_source drift39p2 213200.0 +092924 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-24 19:42:29 START begin_task: Starting task 'sending tracking commands' 2008-Oct-24 19:42:29 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-24 19:42:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift39p2} INFO {Slewing to source 'drift39p2' ...} 2008-Oct-24 19:42:29 INFO1 track_source: Starting to track drift39p2 2008-Oct-24 19:42:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-24 19:42:29 LOG3 vw_send: To DATATAKING: set ra 213200.0 2008-Oct-24 19:42:29 LOG3 vw_send: To DATATAKING: set dec +092924 2008-Oct-24 19:42:29 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-24 19:42:29 LOG3 vw_send: To DATATAKING: pnt tr 213200.0 +092924 -CJ 2008-Oct-24 19:42:30 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-24 19:42:30 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-24 19:42:30 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-24 19:42:30 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-24 19:42:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:42:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-24 19:42:30 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-24 19:42:30 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-24 19:42:30 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-24 19:42:30 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-24 19:42:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-24 19:42:30 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-24 19:42:30 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-24 19:42:30 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-24 19:42:30 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-24 19:42:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:42:30 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-24 19:42:30 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-24 19:42:30 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-24 19:42:30 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-24 19:42:30 DONE finish_task: DONE finished selecting: new source 2008-Oct-24 19:42:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:42:30 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-24 19:42:30 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-24 19:42:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-24 19:42:30 LOG4 got_cormsg: From DATATAKING: set ra 213200.0 2008-Oct-24 19:42:30 LOG4 got_cormsg: From DATATAKING: set dec +092924 2008-Oct-24 19:42:30 LOG4 got_cormsg: From DATATAKING: vw% 213200.0 2008-Oct-24 19:42:30 LOG4 got_cormsg: From DATATAKING: vw% +092924 2008-Oct-24 19:42:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:42:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-24 19:42:30 LOG4 got_cormsg: From DATATAKING: pnt tr 213200.0 +092924 -CJ 2008-Oct-24 19:42:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-24 19:42:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-24 19:42:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:42:30 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-24 19:42:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-24 19:42:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-24 19:42:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-24 19:42:57 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-24 19:42:57 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-24 19:42:57 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-24 19:42:57 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-24 19:42:57 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-24 19:42:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-24 19:42:57 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-24 19:42:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 19:42:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-24 19:42:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 19:42:57 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-24 19:42:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 19:42:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 19:42:57 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-24 19:42:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 19:42:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-24 19:42:57 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-24 19:42:57 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-24 19:42:57 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-24 19:42:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-24 19:42:57 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-24 19:42:57 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-24 19:42:57 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-24 19:42:57 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-24 19:42:57 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-24 19:42:57 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-24 19:42:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-24 19:42:57 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-24 19:42:57 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-24 19:42:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-24 19:42:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:42:57 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-24 19:42:57 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-24 19:42:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-24 19:42:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:42:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:42:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:42:58 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-24 19:42:58 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-24 19:42:58 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-24 19:42:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-24 19:42:58 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-24 19:42:58 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-24 19:42:58 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-24 19:42:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:42:58 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-24 19:42:58 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-24 19:42:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:43:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-24 19:43:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-24 19:43:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-24 19:43:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-24 19:43:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-24 19:43:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-24 19:43:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-24 19:43:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-24 19:43:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-24 19:43:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-24 19:43:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-24 19:43:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-24 19:43:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-24 19:43:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-24 19:43:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-24 19:43:07 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-24 19:43:07 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-24 19:43:07 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-24 19:43:07 LOG5 begin_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-24 19:43:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-24 19:43:07 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-24 19:43:07 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-24 19:43:07 START begin_task: Starting task 'selecting calibration port' 2008-Oct-24 19:43:07 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-24 19:43:07 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-24 19:43:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-24 19:43:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:43:07 START begin_task: Starting task 'waiting on calport' 2008-Oct-24 19:43:07 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-24 19:43:07 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-24 19:43:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:43:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:43:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-24 19:43:07 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-24 19:43:07 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-24 19:43:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-24 19:43:07 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-24 19:43:07 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-24 19:43:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-24 19:43:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-24 19:43:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 19:43:07 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-24 19:43:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:43:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 19:43:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 19:43:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 19:43:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 19:43:07 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-24 19:43:07 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-24 19:43:07 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-24 19:43:07 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-24 19:43:07 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-24 19:43:07 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-24 19:43:07 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-24 19:43:07 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-24 19:43:07 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-24 19:43:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-24 19:43:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-24 19:43:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-24 19:43:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-24 19:43:07 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-24 19:43:07 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-24 19:43:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 19:43:07 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-24 19:43:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-24 19:43:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 19:43:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-24 19:43:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 19:43:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-24 19:43:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 19:43:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 19:43:08 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-24 19:43:08 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-24 19:43:08 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-24 19:43:08 LOG5 finish_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-24 19:43:08 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-24 19:43:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:43:08 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-24 19:43:08 LOG5 end_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-24 19:43:08 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-24 19:43:30 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-24 19:43:30 LOG4 exec_msg: From OBSERVER: track_new_source drift39p2 213200.0 +092924 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-24 19:43:30 LOG1 track_new_source: Calling 'track_new_source drift39p2 213200.0 +092924 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-24 19:43:30 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-24 19:43:30 LOG5 begin_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-24 19:43:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift39p2} INFO {Selecting source 'drift39p2' ...} 2008-Oct-24 19:43:30 LOG3 track_source: Calling 'track_source drift39p2 213200.0 +092924 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-24 19:43:30 START begin_task: Starting task 'sending tracking commands' 2008-Oct-24 19:43:30 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-24 19:43:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift39p2} INFO {Slewing to source 'drift39p2' ...} 2008-Oct-24 19:43:30 INFO1 track_source: Starting to track drift39p2 2008-Oct-24 19:43:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-24 19:43:30 LOG3 vw_send: To DATATAKING: set ra 213200.0 2008-Oct-24 19:43:30 LOG3 vw_send: To DATATAKING: set dec +092924 2008-Oct-24 19:43:30 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-24 19:43:30 LOG3 vw_send: To DATATAKING: pnt tr 213200.0 +092924 -CJ 2008-Oct-24 19:43:30 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-24 19:43:30 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-24 19:43:30 LOG5 finish_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-24 19:43:30 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-24 19:43:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:43:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-24 19:43:30 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-24 19:43:30 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-24 19:43:30 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-24 19:43:30 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-24 19:43:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-24 19:43:30 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-24 19:43:30 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-24 19:43:30 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-24 19:43:30 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-24 19:43:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:43:30 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-24 19:43:30 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-24 19:43:30 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-24 19:43:30 LOG5 finish_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-24 19:43:30 DONE finish_task: DONE finished selecting: new source 2008-Oct-24 19:43:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:43:30 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-24 19:43:30 LOG5 end_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-24 19:43:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-24 19:43:30 LOG4 got_cormsg: From DATATAKING: set ra 213200.0 2008-Oct-24 19:43:30 LOG4 got_cormsg: From DATATAKING: set dec +092924 2008-Oct-24 19:43:30 LOG4 got_cormsg: From DATATAKING: vw% 213200.0 2008-Oct-24 19:43:30 LOG4 got_cormsg: From DATATAKING: vw% +092924 2008-Oct-24 19:43:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:43:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-24 19:43:30 LOG4 got_cormsg: From DATATAKING: pnt tr 213200.0 +092924 -CJ 2008-Oct-24 19:43:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-24 19:43:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-24 19:43:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:43:30 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-24 19:43:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:43:34 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-24 19:43:34 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-24 19:43:34 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-24 19:43:34 LOG5 begin_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-24 19:43:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-24 19:43:34 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-24 19:43:34 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-24 19:43:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-24 19:43:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:43:34 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-24 19:43:34 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-24 19:43:34 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-24 19:43:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:43:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:43:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-24 19:43:37 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-24 19:43:37 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-24 19:43:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-24 19:43:37 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-24 19:43:37 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-24 19:43:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-24 19:43:37 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-24 19:43:37 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-24 19:43:37 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-24 19:43:37 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-24 19:43:37 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-24 19:43:37 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-24 19:43:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-24 19:43:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:43:38 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-24 19:43:38 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2008-Oct-24 19:43:38 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2008-Oct-24 19:43:38 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Oct-24 19:43:38 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-24 19:43:38 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-24 19:43:38 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-24 19:43:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.052 1.024 ALFA beam 1: 0.980 0.894 2008-Oct-24 19:43:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.924 0.908 ALFA beam 3: 0.922 1.048 2008-Oct-24 19:43:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.964 1.017 ALFA beam 5: 0.972 1.043 2008-Oct-24 19:43:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.043 0.097 ALFA beam 7: 0.925 0.107 2008-Oct-24 19:43:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-24 19:43:38 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-24 19:43:38 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Oct-24 19:43:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:43:38 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-24 19:43:38 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-24 19:43:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-24 19:43:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-24 19:43:38 LOG5 finish_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-24 19:43:38 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-24 19:43:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 19:43:38 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-24 19:43:38 LOG5 end_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-24 19:43:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Oct-24 19:43:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.024 0.980 0.894 2008-Oct-24 19:43:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.908 0.922 1.048 2008-Oct-24 19:43:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.964 1.017 0.972 1.043 2008-Oct-24 19:43:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.097 0.925 0.107 2008-Oct-24 19:43:40 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2008-Oct-24 19:43:40 LOG4 exec_msg: From OBSERVER: new_file manual 2008-Oct-24 19:43:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-24 19:43:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-24 19:43:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-24 19:43:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-24 19:43:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-24 19:43:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20081024.a2010.0010.fits 2008-Oct-24 19:43:40 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081024.a2010.0010.fits} 2008-Oct-24 19:43:43 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Oct-24 19:43:43 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift39p2 213200.0 +092924 J 0 Topocentric velocity(optical) 2008-Oct-24 19:43:43 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift39p2 213200.0 +092924 J 0 Topocentric velocity(optical)' 2008-Oct-24 19:43:43 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Oct-24 19:43:43 LOG5 begin_task: Level: (1) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-24 19:43:43 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift39p2' 2008-Oct-24 19:43:43 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Oct-24 19:43:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift39p2} 2008-Oct-24 19:43:43 INFO5 fixed_driftmap: Start: year = 2008.8181301176262 RA = 21:32:26.9 Dec = +09:31:54.4 2008-Oct-24 19:43:43 NOTE fixed_driftmap: Setting ZA to 8:49:19.3 ... 2008-Oct-24 19:43:43 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 8.82 2008-Oct-24 19:43:43 LOG3 track_source: Calling 'track_source drift39p2 360.0 8.8220345369 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Oct-24 19:43:43 START begin_task: Starting task 'sending tracking commands' 2008-Oct-24 19:43:43 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-24 19:43:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift39p2} INFO {Slewing to source 'drift39p2' ...} 2008-Oct-24 19:43:43 INFO1 track_source: Starting to track drift39p2 2008-Oct-24 19:43:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-24 19:43:43 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Oct-24 19:43:43 LOG3 vw_send: To DATATAKING: set dec 8.8220345369 2008-Oct-24 19:43:43 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-24 19:43:43 LOG3 vw_send: To DATATAKING: pnt tr 360.0 8.8220345369 -CF 2008-Oct-24 19:43:44 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-24 19:43:44 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-24 19:43:44 LOG5 finish_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-24 19:43:44 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-24 19:43:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:43:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-24 19:43:44 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-24 19:43:44 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-24 19:43:44 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-24 19:43:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-24 19:43:44 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-24 19:43:44 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Oct-24 19:43:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-24 19:43:44 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-24 19:43:44 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-24 19:43:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-24 19:43:44 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Oct-24 19:43:44 LOG4 got_cormsg: From DATATAKING: set dec 8.8220345369 2008-Oct-24 19:43:44 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Oct-24 19:43:44 LOG4 got_cormsg: From DATATAKING: vw% 8.8220345369 2008-Oct-24 19:43:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:43:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-24 19:43:44 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 8.8220345369 -CF 2008-Oct-24 19:43:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-24 19:43:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-24 19:43:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:43:44 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-24 19:43:44 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-24 19:43:44 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-24 19:43:44 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-24 19:43:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-24 19:43:45 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-24 19:43:45 LOG5 finish_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-24 19:43:45 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-24 19:43:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:43:45 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-24 19:43:45 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-24 19:43:45 START begin_task: Starting task 'waiting on telescope' 2008-Oct-24 19:43:45 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-24 19:43:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-24 19:43:45 LOG3 waittrk: Start waittrk 5 2008-Oct-24 19:43:45 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-24 19:43:45 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-24 19:43:50 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-24 19:43:50 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-24 19:43:50 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-24 19:43:50 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-24 19:44:01 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-24 19:44:01 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-24 19:44:01 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-24 19:44:01 INFO2 waittrk: Now tracking drift39p2 2008-Oct-24 19:44:01 LOG4 waittrk: Current telescope position: Az = 359.63 ZA = 8.78 2008-Oct-24 19:44:01 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-24 19:44:01 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-24 19:44:01 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Oct-24 19:44:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:44:01 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-24 19:44:01 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-24 19:44:01 START begin_task: Starting task 'selecting calibration type' 2008-Oct-24 19:44:01 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-24 19:44:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-24 19:44:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-24 19:44:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:44:01 START begin_task: Starting task 'waiting on setcal' 2008-Oct-24 19:44:01 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-24 19:44:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-24 19:44:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:44:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:44:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-24 19:44:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-24 19:44:01 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-24 19:44:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-24 19:44:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 19:44:01 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-24 19:44:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 19:44:01 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-24 19:44:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:44:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 19:44:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 19:44:02 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-24 19:44:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 19:44:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-24 19:44:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 19:44:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-24 19:44:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 19:44:02 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-24 19:44:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 19:44:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 19:44:02 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-24 19:44:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 19:44:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-24 19:44:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-24 19:44:02 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-24 19:44:02 LOG5 dopset_later: Calling 'dopset_later 28.079549329969367' 2008-Oct-24 19:44:02 INFO3 dopset_later: Setting Doppler correction for 19:44:30 (28.1 seconds from now) 2008-Oct-24 19:44:02 LOG5 antvel: Calling 'antvel 360.000000 8.822035 F 28.079549329969367' 2008-Oct-24 19:44:02 LOG2 antvel: Transforming current Az = 360.00 ZA = 8.82 to apparent RA = 21:32:26.8 Dec = +09:31:54.4 2008-Oct-24 19:44:02 LOG2 antvel: Parameters to Doppler: Topocentric 85470 2008 298 0.0 2008-Oct-24 19:44:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-24 19:44:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-24 19:44:03 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-24 19:44:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-24 19:44:03 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-24 19:44:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-24 19:44:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:44:03 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-24 19:44:03 LOG5 begin_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-24 19:44:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-24 19:44:03 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-24 19:44:03 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-24 19:44:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-24 19:44:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:44:03 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-24 19:44:03 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-24 19:44:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-24 19:44:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 19:44:03 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-24 19:44:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:44:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:44:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:44:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:44:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-24 19:44:06 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-24 19:44:06 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-24 19:44:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-24 19:44:06 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-24 19:44:06 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-24 19:44:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-24 19:44:06 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-24 19:44:06 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-24 19:44:06 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-24 19:44:06 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-24 19:44:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-24 19:44:06 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-24 19:44:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-24 19:44:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:44:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 5 dB 2008-Oct-24 19:44:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2008-Oct-24 19:44:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2008-Oct-24 19:44:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Oct-24 19:44:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-24 19:44:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-24 19:44:06 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-24 19:44:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.051 1.023 ALFA beam 1: 0.980 1.128 2008-Oct-24 19:44:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.926 0.904 ALFA beam 3: 0.940 1.067 2008-Oct-24 19:44:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.975 1.038 ALFA beam 5: 0.979 1.043 2008-Oct-24 19:44:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.060 0.099 ALFA beam 7: 0.934 0.109 2008-Oct-24 19:44:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-24 19:44:06 LOG5 finish_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-24 19:44:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-24 19:44:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:44:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-24 19:44:06 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-24 19:44:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-24 19:44:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-24 19:44:06 LOG5 finish_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-24 19:44:06 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-24 19:44:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:44:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-24 19:44:06 LOG5 end_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-24 19:44:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-24 19:44:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-24 19:44:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-24 19:44:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-24 19:44:07 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081024.a2010.0010.fits' is empty! 2008-Oct-24 19:44:07 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:32:26.9 LST = 21:32:02.7 diff = 24.1 secs 2008-Oct-24 19:44:07 INFO2 fixed_driftmap: Waiting 22.1 seconds for RA 21:32:27 2008-Oct-24 19:44:07 INFO2 lstwait: Waiting for 22.1 secs from LST 21:32:03 to LST 21:32:25 ... 2008-Oct-24 19:44:07 LOG4 send_obs_status: To obs_status: <1> TASKTIME 22.085560126131234 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Oct-24 19:44:07 START begin_task: Starting task 'waiting on wait on LST' 2008-Oct-24 19:44:07 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-24 19:44:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-24 19:44:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:44:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 1.023 0.980 1.128 2008-Oct-24 19:44:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.904 0.940 1.067 2008-Oct-24 19:44:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 1.038 0.979 1.043 2008-Oct-24 19:44:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.099 0.934 0.109 2008-Oct-24 19:44:29 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Oct-24 19:44:29 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-24 19:44:29 LOG4 lstwait: Finished waiting -0.09 seconds late 2008-Oct-24 19:44:29 INFO3 lstwait: Finished waiting 2008-Oct-24 19:44:29 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-24 19:44:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Oct-24 19:44:29 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-24 19:44:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-24 19:44:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-24 19:44:29 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-24 19:44:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-24 19:44:29 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-24 19:44:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-24 19:44:29 INFO2 take_data: Starting WAPP scan: 829800168 2008-Oct-24 19:44:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-24 19:44:29 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-24 19:44:29 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-24 19:44:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:44:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85470.00 2008-Oct-24 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Oct-24 19:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Oct-24 19:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Oct-24 19:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Oct-24 19:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Oct-24 19:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Oct-24 19:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Oct-24 19:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Oct-24 19:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Oct-24 19:45:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:45:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 1.022 0.984 1.129 2008-Oct-24 19:45:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.904 0.944 1.068 2008-Oct-24 19:45:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 1.042 0.977 1.045 2008-Oct-24 19:45:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.099 0.936 0.109 2008-Oct-24 19:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Oct-24 19:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Oct-24 19:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Oct-24 19:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Oct-24 19:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Oct-24 19:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Oct-24 19:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Oct-24 19:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 19:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 19:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 19:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 19:46:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:46:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 1.024 0.989 1.138 2008-Oct-24 19:46:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.907 0.947 1.077 2008-Oct-24 19:46:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.972 1.039 0.976 1.043 2008-Oct-24 19:46:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.099 0.933 0.109 2008-Oct-24 19:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 19:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 19:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 19:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 19:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 19:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 19:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 19:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 19:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 19:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Oct-24 19:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Oct-24 19:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Oct-24 19:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:47:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:47:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 1.027 0.983 1.130 2008-Oct-24 19:47:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.907 0.939 1.068 2008-Oct-24 19:47:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 1.040 0.979 1.044 2008-Oct-24 19:47:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.099 0.935 0.109 2008-Oct-24 19:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Oct-24 19:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Oct-24 19:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Oct-24 19:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:48:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:48:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 1.029 0.986 1.133 2008-Oct-24 19:48:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.905 0.942 1.070 2008-Oct-24 19:48:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.036 0.977 1.043 2008-Oct-24 19:48:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.099 0.936 0.109 2008-Oct-24 19:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Oct-24 19:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Oct-24 19:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:49:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:49:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 1.025 0.987 1.129 2008-Oct-24 19:49:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 0.909 0.940 1.071 2008-Oct-24 19:49:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.969 1.040 0.977 1.045 2008-Oct-24 19:49:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.099 0.936 0.109 2008-Oct-24 19:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Oct-24 19:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Oct-24 19:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:50:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:50:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 1.026 0.986 1.132 2008-Oct-24 19:50:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.910 0.944 1.074 2008-Oct-24 19:50:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.040 0.983 1.048 2008-Oct-24 19:50:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.099 0.938 0.109 2008-Oct-24 19:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 19:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 19:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 19:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:51:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:51:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.026 0.990 1.131 2008-Oct-24 19:51:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 0.910 0.942 1.072 2008-Oct-24 19:51:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.969 1.041 0.976 1.046 2008-Oct-24 19:51:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.099 0.937 0.109 2008-Oct-24 19:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Oct-24 19:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-24 19:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Oct-24 19:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 19:52:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:52:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 1.026 0.986 1.133 2008-Oct-24 19:52:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 0.913 0.942 1.071 2008-Oct-24 19:52:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.039 0.980 1.046 2008-Oct-24 19:52:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.099 0.940 0.109 2008-Oct-24 19:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 19:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 19:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:53:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:53:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 1.025 0.987 1.132 2008-Oct-24 19:53:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.912 0.942 1.070 2008-Oct-24 19:53:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.039 0.977 1.046 2008-Oct-24 19:53:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.109 2008-Oct-24 19:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Oct-24 19:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 19:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-24 19:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 19:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 19:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 19:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 19:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 19:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 19:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Oct-24 19:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 19:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 19:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 19:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 19:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 19:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:54:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:54:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 1.026 0.987 1.147 2008-Oct-24 19:54:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.912 0.945 1.074 2008-Oct-24 19:54:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.042 0.979 1.046 2008-Oct-24 19:54:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.099 0.937 0.109 2008-Oct-24 19:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 19:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 19:54:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:54:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-24 19:54:30 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-24 19:54:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-24 19:54:30 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-24 19:54:30 LOG1 fixed_driftmap: New position: year = 2008.8181506198189 RA = 21:42:02.1 RA/Dec = 21:42:29.1 +09:31:59.2 2008-Oct-24 19:54:30 NOTE fixed_driftmap: Correcting ZA to 8:49:14.5 ... 2008-Oct-24 19:54:30 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 8.8206951195 -CF 2008-Oct-24 19:54:30 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-24 19:54:30 START begin_task: Starting task 'WAPP calibration' 2008-Oct-24 19:54:30 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-24 19:54:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-24 19:54:30 START begin_task: Starting task 'selecting calibration type' 2008-Oct-24 19:54:30 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-24 19:54:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-24 19:54:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-24 19:54:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:54:30 START begin_task: Starting task 'waiting on setcal' 2008-Oct-24 19:54:30 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-24 19:54:30 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 8.8206951195 -CF 2008-Oct-24 19:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 19:54:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:54:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-24 19:54:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 19:54:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:54:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-24 19:54:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-24 19:54:30 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-24 19:54:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-24 19:54:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 19:54:30 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-24 19:54:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 19:54:30 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-24 19:54:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 19:54:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 19:54:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 19:54:31 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-24 19:54:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 19:54:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-24 19:54:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 19:54:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-24 19:54:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 19:54:31 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-24 19:54:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 19:54:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 19:54:31 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-24 19:54:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 19:54:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-24 19:54:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-24 19:54:31 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-24 19:54:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-24 19:54:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-24 19:54:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-24 19:54:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 19:54:31 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-24 19:54:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 19:54:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-24 19:54:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 19:54:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 19:54:31 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-24 19:54:31 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-24 19:54:31 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-24 19:54:31 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-24 19:54:31 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-24 19:54:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-24 19:54:31 INFO2 take_data: Starting WAPP scan: 829800169 2008-Oct-24 19:54:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-24 19:54:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-24 19:54:31 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-24 19:54:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:54:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86072.00 2008-Oct-24 19:54:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:54:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:54:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:54:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:54:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:54:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:54:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:54:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:54:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.551 (still bad) 2008-Oct-24 19:54:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 19:54:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-24 19:54:33 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-24 19:54:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-24 19:54:33 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-24 19:54:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-24 19:54:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-24 19:54:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-24 19:54:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 19:54:33 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-24 19:54:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 19:54:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 19:54:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 19:54:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 19:54:34 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-24 19:54:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-24 19:54:34 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-24 19:54:34 LOG5 finish_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-24 19:54:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-24 19:54:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 19:54:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-24 19:54:34 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-24 19:54:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Oct-24 19:54:34 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-24 19:54:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-24 19:54:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-24 19:54:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-24 19:54:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-24 19:54:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-24 19:54:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-24 19:54:34 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-24 19:54:34 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-24 19:54:34 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-24 19:54:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-24 19:54:34 INFO2 take_data: Starting WAPP scan: 829800170 2008-Oct-24 19:54:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-24 19:54:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-24 19:54:34 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-24 19:54:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-24 19:54:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 19:54:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86075.00 2008-Oct-24 19:54:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20081024.a2010.0011.fits 2008-Oct-24 19:54:34 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081024.a2010.0011.fits} 2008-Oct-24 19:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.551 (still bad) 2008-Oct-24 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 19:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 19:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 19:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 19:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 19:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 19:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 19:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 19:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 19:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.152 (still bad) 2008-Oct-24 19:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.153 (still bad) 2008-Oct-24 19:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.154 (still bad) 2008-Oct-24 19:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.158 (still bad) 2008-Oct-24 19:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 19:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 19:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 19:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 19:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.155 (still bad) 2008-Oct-24 19:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 19:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 19:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 19:55:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:55:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 1.030 0.983 1.148 2008-Oct-24 19:55:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 0.912 0.942 1.073 2008-Oct-24 19:55:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 1.046 0.977 1.045 2008-Oct-24 19:55:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.099 0.935 0.109 2008-Oct-24 19:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 19:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 19:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 19:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 19:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 19:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 19:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 19:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 19:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 19:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 19:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 19:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 19:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 19:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 19:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 19:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 19:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 19:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 19:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 19:56:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:56:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 1.029 0.987 1.142 2008-Oct-24 19:56:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 0.910 0.942 1.074 2008-Oct-24 19:56:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.042 0.975 1.043 2008-Oct-24 19:56:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.099 0.934 0.109 2008-Oct-24 19:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 19:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 19:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 19:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 19:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 19:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 19:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 19:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 19:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 19:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 19:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 19:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 19:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 19:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 19:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 19:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 19:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 19:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 19:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 19:57:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:57:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 1.027 0.983 1.143 2008-Oct-24 19:57:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.912 0.942 1.072 2008-Oct-24 19:57:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 1.045 0.977 1.045 2008-Oct-24 19:57:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.099 0.935 0.109 2008-Oct-24 19:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 19:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 19:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 19:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 19:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 19:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.152 (still bad) 2008-Oct-24 19:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 19:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 19:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 19:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 19:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 19:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 19:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 19:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.153 (still bad) 2008-Oct-24 19:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.152 (still bad) 2008-Oct-24 19:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.153 (still bad) 2008-Oct-24 19:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.155 (still bad) 2008-Oct-24 19:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.158 (still bad) 2008-Oct-24 19:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.155 (still bad) 2008-Oct-24 19:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.165 (still bad) 2008-Oct-24 19:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.167 (still bad) 2008-Oct-24 19:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.163 (still bad) 2008-Oct-24 19:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.156 (still bad) 2008-Oct-24 19:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.154 (still bad) 2008-Oct-24 19:58:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:58:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 1.028 0.987 1.150 2008-Oct-24 19:58:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 0.912 0.943 1.074 2008-Oct-24 19:58:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.052 0.978 1.042 2008-Oct-24 19:58:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.109 2008-Oct-24 19:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.155 (still bad) 2008-Oct-24 19:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.157 (still bad) 2008-Oct-24 19:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 19:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 19:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 19:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 19:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 19:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 19:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.153 (still bad) 2008-Oct-24 19:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.156 (still bad) 2008-Oct-24 19:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.156 (still bad) 2008-Oct-24 19:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.154 (still bad) 2008-Oct-24 19:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 19:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.159 (still bad) 2008-Oct-24 19:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.156 (still bad) 2008-Oct-24 19:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.154 (still bad) 2008-Oct-24 19:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.159 (still bad) 2008-Oct-24 19:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.161 (still bad) 2008-Oct-24 19:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 19:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 19:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 19:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 19:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 19:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 19:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:59:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 19:59:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.064 0.985 1.140 2008-Oct-24 19:59:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 0.912 0.945 1.075 2008-Oct-24 19:59:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 1.043 0.984 1.050 2008-Oct-24 19:59:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.938 0.109 2008-Oct-24 19:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.200 (still bad) 2008-Oct-24 19:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.260 (still bad) 2008-Oct-24 19:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.309 (still bad) 2008-Oct-24 19:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.332 (still bad) 2008-Oct-24 19:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.325 (still bad) 2008-Oct-24 19:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.283 (still bad) 2008-Oct-24 19:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.222 (still bad) 2008-Oct-24 19:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.162 (still bad) 2008-Oct-24 19:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 19:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 19:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 19:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 20:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:00:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:00:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 1.029 0.989 1.144 2008-Oct-24 20:00:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 0.917 0.947 1.076 2008-Oct-24 20:00:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.972 1.042 0.976 1.043 2008-Oct-24 20:00:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.109 2008-Oct-24 20:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.152 (still bad) 2008-Oct-24 20:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.153 (still bad) 2008-Oct-24 20:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:01:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:01:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 1.026 0.985 1.148 2008-Oct-24 20:01:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 0.916 0.944 1.074 2008-Oct-24 20:01:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 1.044 0.983 1.044 2008-Oct-24 20:01:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.935 0.109 2008-Oct-24 20:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:02:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:02:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 1.029 0.987 1.142 2008-Oct-24 20:02:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.925 0.942 1.073 2008-Oct-24 20:02:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 1.044 0.978 1.044 2008-Oct-24 20:02:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.099 0.938 0.109 2008-Oct-24 20:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.152 (still bad) 2008-Oct-24 20:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.152 (still bad) 2008-Oct-24 20:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.153 (still bad) 2008-Oct-24 20:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Oct-24 20:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Oct-24 20:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:03:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:03:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.028 0.986 1.144 2008-Oct-24 20:03:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 0.913 0.941 1.073 2008-Oct-24 20:03:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.972 1.043 0.978 1.042 2008-Oct-24 20:03:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.099 0.937 0.109 2008-Oct-24 20:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:04:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 20:04:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-24 20:04:35 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-24 20:04:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-24 20:04:35 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-24 20:04:35 LOG1 fixed_driftmap: New position: year = 2008.818169791112 RA = 21:52:08.6 RA/Dec = 21:52:35.7 +09:32:03.8 2008-Oct-24 20:04:35 NOTE fixed_driftmap: Correcting ZA to 8:49:09.9 ... 2008-Oct-24 20:04:35 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 8.8194257212 -CF 2008-Oct-24 20:04:35 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-24 20:04:35 START begin_task: Starting task 'WAPP calibration' 2008-Oct-24 20:04:35 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-24 20:04:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-24 20:04:35 START begin_task: Starting task 'selecting calibration type' 2008-Oct-24 20:04:35 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-24 20:04:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-24 20:04:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-24 20:04:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 20:04:35 START begin_task: Starting task 'waiting on setcal' 2008-Oct-24 20:04:35 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-24 20:04:35 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 8.8194257212 -CF 2008-Oct-24 20:04:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:04:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-24 20:04:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 20:04:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:04:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-24 20:04:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-24 20:04:36 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-24 20:04:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-24 20:04:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 20:04:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-24 20:04:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 20:04:36 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-24 20:04:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:04:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 20:04:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 20:04:36 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-24 20:04:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 20:04:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-24 20:04:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 20:04:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-24 20:04:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 20:04:36 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-24 20:04:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 20:04:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 20:04:36 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-24 20:04:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 20:04:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-24 20:04:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-24 20:04:36 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-24 20:04:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-24 20:04:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-24 20:04:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-24 20:04:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 20:04:36 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-24 20:04:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 20:04:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-24 20:04:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 20:04:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 20:04:36 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-24 20:04:36 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-24 20:04:36 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-24 20:04:36 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-24 20:04:36 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-24 20:04:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-24 20:04:36 INFO2 take_data: Starting WAPP scan: 829800171 2008-Oct-24 20:04:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-24 20:04:36 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-24 20:04:36 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-24 20:04:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 20:04:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:04:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.023 0.993 1.143 2008-Oct-24 20:04:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 0.915 0.944 1.072 2008-Oct-24 20:04:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 1.045 0.977 1.043 2008-Oct-24 20:04:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.109 2008-Oct-24 20:04:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 277.00 2008-Oct-24 20:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 20:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 20:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 20:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 20:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 20:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 20:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 20:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 20:04:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 20:04:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 20:04:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-24 20:04:38 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-24 20:04:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-24 20:04:38 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-24 20:04:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-24 20:04:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-24 20:04:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-24 20:04:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 20:04:38 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-24 20:04:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 20:04:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 20:04:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 20:04:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 20:04:38 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-24 20:04:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-24 20:04:38 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-24 20:04:38 LOG5 finish_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-24 20:04:38 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-24 20:04:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 20:04:38 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-24 20:04:38 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-24 20:04:38 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Oct-24 20:04:39 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Oct-24 20:04:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-24 20:04:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-24 20:04:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-24 20:04:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-24 20:04:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-24 20:04:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-24 20:04:39 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-24 20:04:39 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-24 20:04:39 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-24 20:04:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-24 20:04:39 INFO2 take_data: Starting WAPP scan: 829800172 2008-Oct-24 20:04:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-24 20:04:39 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-24 20:04:39 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-24 20:04:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-24 20:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.548 (still bad) 2008-Oct-24 20:04:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 20:04:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 280.00 2008-Oct-24 20:04:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20081024.a2010.0012.fits 2008-Oct-24 20:04:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081024.a2010.0012.fits} 2008-Oct-24 20:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 20:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 20:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 20:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 20:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 20:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 20:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 20:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 20:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.548 (still bad) 2008-Oct-24 20:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 20:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.155 (still bad) 2008-Oct-24 20:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.160 (still bad) 2008-Oct-24 20:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.166 (still bad) 2008-Oct-24 20:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.167 (still bad) 2008-Oct-24 20:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.163 (still bad) 2008-Oct-24 20:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Oct-24 20:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Oct-24 20:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 20:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:05:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:05:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.025 0.986 1.141 2008-Oct-24 20:05:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.912 0.940 1.069 2008-Oct-24 20:05:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.043 0.977 1.041 2008-Oct-24 20:05:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.099 0.935 0.109 2008-Oct-24 20:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:06:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:06:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 1.025 0.987 1.140 2008-Oct-24 20:06:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.911 0.939 1.071 2008-Oct-24 20:06:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 1.039 0.977 1.043 2008-Oct-24 20:06:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.099 0.934 0.109 2008-Oct-24 20:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:07:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:07:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 1.029 0.985 1.139 2008-Oct-24 20:07:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.913 0.941 1.070 2008-Oct-24 20:07:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.969 1.041 0.978 1.043 2008-Oct-24 20:07:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.099 0.932 0.109 2008-Oct-24 20:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Oct-24 20:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 20:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 20:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 20:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 20:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 20:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 20:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 20:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:08:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:08:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.026 0.988 1.142 2008-Oct-24 20:08:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.908 0.939 1.073 2008-Oct-24 20:08:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.972 1.043 0.975 1.040 2008-Oct-24 20:08:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.099 0.934 0.109 2008-Oct-24 20:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 20:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 20:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-24 20:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 20:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 20:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Oct-24 20:09:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:09:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.029 0.987 1.140 2008-Oct-24 20:09:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 0.910 0.940 1.074 2008-Oct-24 20:09:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 1.046 0.990 1.059 2008-Oct-24 20:09:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.099 0.935 0.110 2008-Oct-24 20:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.167 (still bad) 2008-Oct-24 20:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.184 (still bad) 2008-Oct-24 20:10:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:10:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 1.029 0.986 1.140 2008-Oct-24 20:10:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 0.915 1.041 1.191 2008-Oct-24 20:10:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.964 1.046 0.975 1.044 2008-Oct-24 20:10:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.099 0.944 0.109 2008-Oct-24 20:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.183 (still bad) 2008-Oct-24 20:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.165 (still bad) 2008-Oct-24 20:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Oct-24 20:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:11:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:11:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.027 0.989 1.140 2008-Oct-24 20:11:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 0.915 0.939 1.073 2008-Oct-24 20:11:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 1.045 0.977 1.044 2008-Oct-24 20:11:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.109 2008-Oct-24 20:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Oct-24 20:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Oct-24 20:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Oct-24 20:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Oct-24 20:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:12:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:12:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 1.031 0.988 1.146 2008-Oct-24 20:12:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.907 0.940 1.073 2008-Oct-24 20:12:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.044 0.974 1.042 2008-Oct-24 20:12:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.099 0.938 0.110 2008-Oct-24 20:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-24 20:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-24 20:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.152 (still bad) 2008-Oct-24 20:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.152 (still bad) 2008-Oct-24 20:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.152 (still bad) 2008-Oct-24 20:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.156 (still bad) 2008-Oct-24 20:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.159 (still bad) 2008-Oct-24 20:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.162 (still bad) 2008-Oct-24 20:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.165 (still bad) 2008-Oct-24 20:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.166 (still bad) 2008-Oct-24 20:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.165 (still bad) 2008-Oct-24 20:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.165 (still bad) 2008-Oct-24 20:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.157 (still bad) 2008-Oct-24 20:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.153 (still bad) 2008-Oct-24 20:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.153 (still bad) 2008-Oct-24 20:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:13:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:13:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 1.029 0.989 1.151 2008-Oct-24 20:13:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.909 0.939 1.072 2008-Oct-24 20:13:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.041 0.975 1.044 2008-Oct-24 20:13:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.099 0.936 0.110 2008-Oct-24 20:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:14:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 20:14:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-24 20:14:40 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-24 20:14:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-24 20:14:40 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-24 20:14:40 LOG1 fixed_driftmap: New position: year = 2008.8181889624052 RA = 22:02:15.1 RA/Dec = 22:02:42.4 +09:32:08.0 2008-Oct-24 20:14:40 NOTE fixed_driftmap: Correcting ZA to 8:49:05.7 ... 2008-Oct-24 20:14:40 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 8.8182390488 -CF 2008-Oct-24 20:14:40 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-24 20:14:40 START begin_task: Starting task 'WAPP calibration' 2008-Oct-24 20:14:40 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-24 20:14:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-24 20:14:40 START begin_task: Starting task 'selecting calibration type' 2008-Oct-24 20:14:40 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-24 20:14:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-24 20:14:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-24 20:14:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 20:14:40 START begin_task: Starting task 'waiting on setcal' 2008-Oct-24 20:14:40 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-24 20:14:40 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 8.8182390488 -CF 2008-Oct-24 20:14:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:14:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-24 20:14:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 20:14:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:14:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-24 20:14:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-24 20:14:40 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-24 20:14:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-24 20:14:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 20:14:41 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-24 20:14:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 20:14:41 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2008-Oct-24 20:14:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:14:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 20:14:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 20:14:41 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2008-Oct-24 20:14:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 20:14:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-24 20:14:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 20:14:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-24 20:14:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 20:14:41 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-24 20:14:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 20:14:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 20:14:41 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-24 20:14:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 20:14:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-24 20:14:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-24 20:14:41 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-24 20:14:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-24 20:14:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-24 20:14:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-24 20:14:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 20:14:41 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-24 20:14:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 20:14:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-24 20:14:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 20:14:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 20:14:41 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-24 20:14:41 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-24 20:14:41 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-24 20:14:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-24 20:14:41 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-24 20:14:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-24 20:14:41 INFO2 take_data: Starting WAPP scan: 829800173 2008-Oct-24 20:14:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-24 20:14:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-24 20:14:41 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-24 20:14:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 20:14:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 882.00 2008-Oct-24 20:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 20:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 20:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 20:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 20:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 20:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 20:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 20:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 20:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 20:14:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-24 20:14:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-24 20:14:43 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-24 20:14:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-24 20:14:43 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-24 20:14:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-24 20:14:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-24 20:14:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-24 20:14:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 20:14:43 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-24 20:14:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 20:14:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 20:14:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 20:14:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 20:14:43 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-24 20:14:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-24 20:14:43 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-24 20:14:43 LOG5 finish_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-24 20:14:43 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-24 20:14:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 20:14:43 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-24 20:14:43 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-24 20:14:43 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Oct-24 20:14:43 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Oct-24 20:14:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-24 20:14:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-24 20:14:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-24 20:14:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-24 20:14:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-24 20:14:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-24 20:14:44 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-24 20:14:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-24 20:14:44 LOG5 begin_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-24 20:14:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-24 20:14:44 INFO2 take_data: Starting WAPP scan: 829800174 2008-Oct-24 20:14:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-24 20:14:44 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-24 20:14:44 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-24 20:14:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-24 20:14:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-24 20:14:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20081024.a2010.0013.fits 2008-Oct-24 20:14:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081024.a2010.0013.fits} 2008-Oct-24 20:14:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 885.00 2008-Oct-24 20:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.555 (still bad) 2008-Oct-24 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-24 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2008-Oct-24 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1760.000000 MHz 2008-Oct-24 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1860.000000 MHz 2008-Oct-24 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1960.000000 MHz 2008-Oct-24 20:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:14:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:14:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 1.031 0.985 1.150 2008-Oct-24 20:14:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.910 0.939 1.073 2008-Oct-24 20:14:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.964 1.046 0.973 1.045 2008-Oct-24 20:14:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.936 0.110 2008-Oct-24 20:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.153 (still bad) 2008-Oct-24 20:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:15:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:15:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 1.031 0.988 1.149 2008-Oct-24 20:15:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.913 0.942 1.076 2008-Oct-24 20:15:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.053 0.974 1.046 2008-Oct-24 20:15:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.099 0.937 0.110 2008-Oct-24 20:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Oct-24 20:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.152 (still bad) 2008-Oct-24 20:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Oct-24 20:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Oct-24 20:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Oct-24 20:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Oct-24 20:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Oct-24 20:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:16:49 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 2 dumps! 2008-Oct-24 20:16:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:16:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.031 0.989 1.148 2008-Oct-24 20:16:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.914 0.939 1.076 2008-Oct-24 20:16:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.047 0.973 1.044 2008-Oct-24 20:16:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.110 2008-Oct-24 20:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:17:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.031 0.989 1.148 2008-Oct-24 20:17:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.914 0.939 1.076 2008-Oct-24 20:17:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.047 0.973 1.044 2008-Oct-24 20:17:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.110 2008-Oct-24 20:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:18:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.031 0.989 1.148 2008-Oct-24 20:18:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.914 0.939 1.076 2008-Oct-24 20:18:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.047 0.973 1.044 2008-Oct-24 20:18:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.110 2008-Oct-24 20:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:19:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.031 0.989 1.148 2008-Oct-24 20:19:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.914 0.939 1.076 2008-Oct-24 20:19:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.047 0.973 1.044 2008-Oct-24 20:19:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.110 2008-Oct-24 20:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:20:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:20:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.031 0.989 1.148 2008-Oct-24 20:20:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.914 0.939 1.076 2008-Oct-24 20:20:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.047 0.973 1.044 2008-Oct-24 20:20:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.110 2008-Oct-24 20:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:21:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:21:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.031 0.989 1.148 2008-Oct-24 20:21:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.914 0.939 1.076 2008-Oct-24 20:21:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.047 0.973 1.044 2008-Oct-24 20:21:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.110 2008-Oct-24 20:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:22:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:22:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.031 0.989 1.148 2008-Oct-24 20:22:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.914 0.939 1.076 2008-Oct-24 20:22:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.047 0.973 1.044 2008-Oct-24 20:22:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.110 2008-Oct-24 20:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:24:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.031 0.989 1.148 2008-Oct-24 20:24:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.914 0.939 1.076 2008-Oct-24 20:24:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.047 0.973 1.044 2008-Oct-24 20:24:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.110 2008-Oct-24 20:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Oct-24 20:24:59 ERROR end_wait_seconds: ERROR timed out while waiting for WAPP spectra! 2008-Oct-24 20:24:59 LOG1 task_failed: Task 'waiting on WAPP spectra' failed! 2008-Oct-24 20:24:59 LOG5 task_failed: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-24 20:24:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'FAILED' 2008-Oct-24 20:24:59 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 1 failed 2008-Oct-24 20:24:59 START begin_task: Starting task 'stopping the WAPPs' 2008-Oct-24 20:24:59 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 1 failed 2008-Oct-24 20:24:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Oct-24 20:24:59 INFO1 stop_wapp: Stopping the WAPPs 2008-Oct-24 20:24:59 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Oct-24 20:24:59 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Oct-24 20:24:59 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Oct-24 20:24:59 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Oct-24 20:24:59 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Oct-24 20:24:59 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 1 failed 2008-Oct-24 20:24:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Oct-24 20:25:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-24 20:25:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.031 0.989 1.148 2008-Oct-24 20:25:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.914 0.939 1.076 2008-Oct-24 20:25:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.047 0.973 1.044 2008-Oct-24 20:25:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.937 0.110 2008-Oct-24 20:25:04 ERROR end_wait_seconds: ERROR timed out while waiting for stopping WAPPs! 2008-Oct-24 20:25:04 LOG1 task_failed: Task 'waiting on stopping WAPPs' failed! 2008-Oct-24 20:25:04 LOG5 task_failed: Level: (4) ID = <10171> Status = 0 0 0 1 failed 2008-Oct-24 20:25:04 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2008-Oct-24 20:25:04 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 1 failed 2008-Oct-24 20:25:04 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2008-Oct-24 20:25:04 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 1 failed 2008-Oct-24 20:25:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'FAILED' 2008-Oct-24 20:25:04 LOG5 end_task: Level: (2) ID = <10168> Status = 0 0 0 1 failed 2008-Oct-24 20:25:04 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Oct-24 20:25:04 LOG5 finish_task: Level: (1) ID = <10119> Status = 0 0 0 1 failed 2008-Oct-24 20:25:04 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Oct-24 20:25:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Oct-24 20:25:04 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Oct-24 20:25:04 LOG5 end_task: Level: (1) ID = <10119> Status = 0 0 0 1 failed 2008-Oct-24 20:25:04 ERROR WAPP=1+2+3+4-wappcon: ERROR the WAPP never aborted! 2008-Oct-24 20:26:04 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-24 20:26:04 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-24 20:26:04 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-24 20:26:04 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-24 20:26:04 LOG5 begin_task: Level: (1) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-24 20:26:04 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-24 20:26:04 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-24 20:26:04 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-24 20:26:04 LOG5 end_task: Level: (1) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-24 20:26:04 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-24 20:26:04 LOG3 exec_msg: Closing socket 2008-Oct-24 20:26:04 LOG3 exec_msg: Closing socket 2008-Oct-24 20:26:04 LOG3 exec_msg: Closing socket 2008-Oct-24 20:26:04 LOG3 exec_msg: Closing socket 2008-Oct-24 20:26:06 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-24 20:26:06 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-24 20:26:06 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-24 20:26:07 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-24 20:36:05 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-24 20:36:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-24 20:36:08 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-24 20:36:08 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-24 20:36:08 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-24 20:36:08 LOG5 begin_task: Level: (1) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-24 20:36:08 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-24 20:36:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-24 20:36:08 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-24 20:36:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-24 20:36:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-24 20:36:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-24 20:36:08 LOG5 begin_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-24 20:36:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-24 20:36:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-24 20:36:08 LOG5 end_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-24 20:36:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-24 20:36:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-24 20:36:08 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-24 20:36:08 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-24 20:36:08 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-24 20:36:08 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-24 20:36:08 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-24 20:36:08 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-24 20:36:09 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-24 20:36:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-24 20:36:09 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-24 20:36:09 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-24 20:36:09 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-24 20:36:09 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-24 20:36:09 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-24 20:36:09 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-24 20:36:09 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-24 20:36:09 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-24 20:36:09 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-24 20:36:09 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-24 20:36:09 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-24 20:36:09 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-24 20:36:09 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-24 20:36:09 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-24 20:36:09 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-24 20:36:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 20:36:09 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-24 20:36:09 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-24 20:36:09 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-24 20:36:09 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-24 20:36:09 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-24 20:36:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-24 20:36:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 20:36:09 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-24 20:36:09 LOG5 begin_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-24 20:36:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-24 20:36:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-24 20:36:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-24 20:36:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 20:36:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:36:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:36:10 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-24 20:36:10 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-24 20:36:10 LOG5 end_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-24 20:36:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-24 20:36:10 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-24 20:36:10 LOG5 finish_task: Level: (1) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-24 20:36:10 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-24 20:36:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 20:36:10 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-24 20:36:10 LOG5 end_task: Level: (1) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-24 20:36:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-24 20:36:11 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-24 20:36:11 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-24 20:36:11 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-24 20:36:11 LOG5 begin_task: Level: (1) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-24 20:36:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-24 20:36:11 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-24 20:36:11 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-24 20:36:11 START begin_task: Starting task 'selecting calibration port' 2008-Oct-24 20:36:11 LOG5 begin_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-24 20:36:11 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-24 20:36:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-24 20:36:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 20:36:11 START begin_task: Starting task 'waiting on calport' 2008-Oct-24 20:36:11 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-24 20:36:11 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-24 20:36:11 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-24 20:36:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-24 20:36:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:36:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-24 20:36:11 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-24 20:36:11 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-24 20:36:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-24 20:36:11 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-24 20:36:11 LOG5 end_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-24 20:36:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-24 20:36:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-24 20:36:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 20:36:11 LOG5 begin_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-24 20:36:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:36:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 20:36:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 20:36:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 20:36:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 20:36:11 LOG5 end_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-24 20:36:11 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-24 20:36:11 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-24 20:36:11 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-24 20:36:12 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-24 20:36:12 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-24 20:36:12 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-24 20:36:12 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-24 20:36:12 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-24 20:36:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-24 20:36:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-24 20:36:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-24 20:36:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-24 20:36:12 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-24 20:36:12 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-24 20:36:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-24 20:36:12 LOG5 begin_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-24 20:36:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-24 20:36:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-24 20:36:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-24 20:36:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-24 20:36:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-24 20:36:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-24 20:36:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-24 20:36:12 LOG5 end_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-24 20:36:12 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-24 20:36:12 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-24 20:36:12 LOG5 finish_task: Level: (1) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-24 20:36:12 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-24 20:36:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 20:36:12 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-24 20:36:12 LOG5 end_task: Level: (1) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-24 20:36:12 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-24 20:36:12 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-24 20:36:12 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-24 20:36:12 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-24 20:36:12 LOG5 begin_task: Level: (1) ID = <10181> Status = 0 0 0 0 ok 2008-Oct-24 20:36:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-24 20:36:12 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-24 20:36:12 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-24 20:36:12 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-24 20:36:12 LOG5 finish_task: Level: (1) ID = <10181> Status = 0 0 0 0 ok 2008-Oct-24 20:36:12 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-24 20:36:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 20:36:12 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-24 20:36:12 LOG5 end_task: Level: (1) ID = <10181> Status = 0 0 0 0 ok 2008-Oct-24 20:36:13 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-24 20:36:13 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-24 20:36:14 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-24 20:36:42 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-24 20:36:42 LOG4 exec_msg: From OBSERVER: track_new_source drift39p2 222700.0 +092924 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-24 20:36:42 LOG1 track_new_source: Calling 'track_new_source drift39p2 222700.0 +092924 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-24 20:36:42 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-24 20:36:42 LOG5 begin_task: Level: (1) ID = <10182> Status = 0 0 0 0 ok 2008-Oct-24 20:36:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift39p2} INFO {Selecting source 'drift39p2' ...} 2008-Oct-24 20:36:42 LOG3 track_source: Calling 'track_source drift39p2 222700.0 +092924 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-24 20:36:42 START begin_task: Starting task 'sending tracking commands' 2008-Oct-24 20:36:42 LOG5 begin_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2008-Oct-24 20:36:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift39p2} INFO {Slewing to source 'drift39p2' ...} 2008-Oct-24 20:36:42 INFO1 track_source: Starting to track drift39p2 2008-Oct-24 20:36:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-24 20:36:42 LOG3 vw_send: To DATATAKING: set ra 222700.0 2008-Oct-24 20:36:42 LOG3 vw_send: To DATATAKING: set dec +092924 2008-Oct-24 20:36:42 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-24 20:36:42 LOG3 vw_send: To DATATAKING: pnt tr 222700.0 +092924 -CJ 2008-Oct-24 20:36:42 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-24 20:36:42 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-24 20:36:42 LOG5 finish_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2008-Oct-24 20:36:42 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-24 20:36:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 20:36:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-24 20:36:42 LOG5 end_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2008-Oct-24 20:36:42 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-24 20:36:42 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-24 20:36:42 LOG5 begin_task: Level: (2) ID = <10184> Status = 0 0 0 0 ok 2008-Oct-24 20:36:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-24 20:36:43 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-24 20:36:43 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-24 20:36:43 LOG5 finish_task: Level: (2) ID = <10184> Status = 0 0 0 0 ok 2008-Oct-24 20:36:43 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-24 20:36:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-24 20:36:43 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-24 20:36:43 LOG5 end_task: Level: (2) ID = <10184> Status = 0 0 0 0 ok 2008-Oct-24 20:36:43 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-24 20:36:43 LOG5 finish_task: Level: (1) ID = <10182> Status = 0 0 0 0 ok 2008-Oct-24 20:36:43 DONE finish_task: DONE finished selecting: new source 2008-Oct-24 20:36:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-24 20:36:43 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-24 20:36:43 LOG5 end_task: Level: (1) ID = <10182> Status = 0 0 0 0 ok 2008-Oct-24 20:36:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-24 20:36:43 LOG4 got_cormsg: From DATATAKING: set ra 222700.0 2008-Oct-24 20:36:43 LOG4 got_cormsg: From DATATAKING: set dec +092924 2008-Oct-24 20:36:43 LOG4 got_cormsg: From DATATAKING: vw% 222700.0 2008-Oct-24 20:36:43 LOG4 got_cormsg: From DATATAKING: vw% +092924 2008-Oct-24 20:36:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:36:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-24 20:36:43 LOG4 got_cormsg: From DATATAKING: pnt tr 222700.0 +092924 -CJ 2008-Oct-24 20:36:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-24 20:36:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-24 20:36:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:36:43 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-24 20:36:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-24 20:37:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-24 20:37:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-24 20:37:01 LOG4 ex