2008-Oct-23 19:35:09 BEGIN executive: CIMA executive starting ... 2008-Oct-23 19:35:10 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-23 19:35:10 INFO1 executive: Using CIMA version 3.0.05 'next' from 2008-10-21 17:39 2008-Oct-23 19:35:10 INFO4 executive: This is an ON-LINE session 2008-Oct-23 19:35:10 INFO4 executive: This is a LOCAL session 2008-Oct-23 19:35:10 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-23 19:35:10 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'CA and KS' 2008-Oct-23 19:35:10 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081023' 2008-Oct-23 19:35:10 LOG2 log_preferences: Currently applied preferences: 2008-Oct-23 19:35:10 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-23 19:35:10 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-23 19:35:10 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-23 19:35:10 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-23 19:35:10 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-23 19:35:10 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-23 19:35:10 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-23 19:35:10 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-23 19:35:10 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-23 19:35:10 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-23 19:35:10 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-23 19:35:10 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-23 19:35:10 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-23 19:35:10 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-23 19:35:10 ALERT executive: CIMA executive ready 2008-Oct-23 19:35:10 LOG4 got_cormsg: From DATATAKING: spawn rsh cor 2008-Oct-23 19:35:10 LOG4 got_cormsg: From DATATAKING: mcpProg 2008-Oct-23 19:35:11 NOTE frontend: CIMA frontend ready 2008-Oct-23 19:35:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:14 LOG4 got_cormsg: From DATATAKING: source $baseTcl/Setups/setups.cor 2008-Oct-23 19:35:14 LOG4 got_cormsg: From DATATAKING: vw% init 2008-Oct-23 19:35:15 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-23 19:35:15 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-23 19:35:15 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-23 19:35:15 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-23 19:35:15 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-23 19:35:15 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-23 19:35:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-23 19:35:15 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-23 19:35:15 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-23 19:35:15 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-23 19:35:15 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-23 19:35:15 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-23 19:35:15 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-23 19:35:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:35:16 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-23 19:35:16 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-23 19:35:19 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2008-Oct-23 19:35:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:19 LOG4 got_cormsg: From DATATAKING: setup 2008-Oct-23 19:35:19 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-23 19:35:19 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-23 19:35:19 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-23 19:35:19 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-23 19:35:19 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-23 19:35:19 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-23 19:35:19 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-23 19:35:19 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-23 19:35:19 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-23 19:35:19 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-23 19:35:22 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-23 19:35:22 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-23 19:35:23 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-23 19:35:23 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Oct-23 19:35:25 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-23 19:35:25 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:33 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-23 19:35:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:40 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-23 19:35:40 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-23 19:35:40 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-23 19:35:40 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-23 19:35:40 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-23 19:35:40 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-23 19:35:40 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-23 19:35:40 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-23 19:35:40 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-23 19:35:40 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-23 19:35:40 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-23 19:35:40 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-23 19:35:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-23 19:35:40 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-23 19:35:40 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-23 19:35:40 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-23 19:35:41 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-23 19:35:41 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-23 19:35:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-23 19:35:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-23 19:35:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-23 19:35:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-23 19:35:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-23 19:35:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-23 19:35:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-23 19:35:43 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-23 19:35:43 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-23 19:35:43 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-23 19:35:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-23 19:35:43 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-23 19:35:43 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-23 19:35:43 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Oct-23 19:35:43 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-23 19:35:43 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-23 19:35:43 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-23 19:35:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-23 19:35:43 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-23 19:35:43 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-23 19:35:43 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-23 19:35:43 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-23 19:35:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:35:43 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-23 19:35:43 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-23 19:35:43 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-23 19:35:43 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-23 19:35:43 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-23 19:35:43 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-23 19:35:43 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-23 19:35:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-23 19:35:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-23 19:35:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-23 19:35:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-23 19:35:43 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-23 19:35:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-23 19:35:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-23 19:35:43 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-23 19:35:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-23 19:35:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-23 19:35:43 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-23 19:35:43 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-23 19:35:43 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-23 19:35:43 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-23 19:35:43 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-23 19:35:43 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-23 19:35:43 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-23 19:35:43 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-23 19:35:43 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-23 19:35:43 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-23 19:35:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-23 19:35:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:35:43 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-23 19:35:43 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-23 19:35:43 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-23 19:35:43 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-23 19:35:43 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-23 19:35:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-23 19:35:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-23 19:35:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-23 19:35:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-23 19:35:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-23 19:35:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-23 19:35:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-23 19:35:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-23 19:35:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-23 19:35:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-23 19:35:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-23 19:35:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-23 19:35:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-23 19:35:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-23 19:35:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:35:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-23 19:35:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-23 19:35:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-23 19:35:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-23 19:35:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:35:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:36:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:36:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-23 19:36:00 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-23 19:36:00 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-23 19:36:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-23 19:36:00 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-23 19:36:00 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-23 19:36:00 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-23 19:36:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:36:00 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-23 19:36:00 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-23 19:36:00 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-23 19:36:00 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-23 19:36:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-23 19:36:00 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-23 19:36:00 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-23 19:36:00 START begin_task: Starting task 'selecting calibration port' 2008-Oct-23 19:36:00 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-23 19:36:00 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-23 19:36:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-23 19:36:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:36:00 START begin_task: Starting task 'waiting on calport' 2008-Oct-23 19:36:00 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-23 19:36:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:36:00 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-23 19:36:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:36:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:36:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-23 19:36:00 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-23 19:36:00 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-23 19:36:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-23 19:36:00 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-23 19:36:00 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-23 19:36:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-23 19:36:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-23 19:36:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 19:36:00 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-23 19:36:00 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 19:36:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:36:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-23 19:36:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 19:36:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 19:36:00 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-23 19:36:00 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-23 19:36:00 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-23 19:36:00 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-23 19:36:00 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-23 19:36:00 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-23 19:36:00 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-23 19:36:00 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-23 19:36:00 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-23 19:36:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-23 19:36:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-23 19:36:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-23 19:36:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-23 19:36:01 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-23 19:36:01 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-23 19:36:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 19:36:01 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-23 19:36:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 19:36:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-23 19:36:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 19:36:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 19:36:01 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-23 19:36:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-23 19:36:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-23 19:36:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-23 19:36:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-23 19:36:01 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-23 19:36:01 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-23 19:36:01 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-23 19:36:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:36:01 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-23 19:36:01 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-23 19:36:01 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-23 19:36:01 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-23 19:36:01 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-23 19:36:01 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-23 19:36:01 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-23 19:36:01 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-23 19:36:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-23 19:36:01 LOG3 track_source: Calling 'track_source galfasrc 212200.0 +100554 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-23 19:36:01 START begin_task: Starting task 'sending tracking commands' 2008-Oct-23 19:36:01 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-23 19:36:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-23 19:36:01 INFO1 track_source: Starting to track galfasrc 2008-Oct-23 19:36:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-23 19:36:01 LOG3 vw_send: To DATATAKING: set ra 212200.0 2008-Oct-23 19:36:01 LOG3 vw_send: To DATATAKING: set dec +100554 2008-Oct-23 19:36:01 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-23 19:36:01 LOG3 vw_send: To DATATAKING: pnt tr 212200.0 +100554 -CJ 2008-Oct-23 19:36:01 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-23 19:36:01 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-23 19:36:01 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-23 19:36:01 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-23 19:36:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:36:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-23 19:36:01 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-23 19:36:01 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-23 19:36:01 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-23 19:36:01 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-23 19:36:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:36:02 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-23 19:36:02 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-23 19:36:02 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-23 19:36:02 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-23 19:36:02 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-23 19:36:02 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-23 19:36:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-23 19:36:02 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-23 19:36:02 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-23 19:36:02 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-23 19:36:02 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-23 19:36:02 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-23 19:36:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-23 19:36:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20081023.a2010.0010.fits 2008-Oct-23 19:36:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-23 19:36:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-23 19:36:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-23 19:36:02 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081023.a2010.0010.fits} 2008-Oct-23 19:36:02 LOG4 got_cormsg: From DATATAKING: set ra 212200.0 2008-Oct-23 19:36:02 LOG4 got_cormsg: From DATATAKING: set dec +100554 2008-Oct-23 19:36:02 LOG4 got_cormsg: From DATATAKING: vw% 212200.0 2008-Oct-23 19:36:02 LOG4 got_cormsg: From DATATAKING: vw% +100554 2008-Oct-23 19:36:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:36:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-23 19:36:02 LOG4 got_cormsg: From DATATAKING: pnt tr 212200.0 +100554 -CJ 2008-Oct-23 19:36:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-23 19:36:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-23 19:36:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:36:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-23 19:36:24 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-23 19:36:24 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-23 19:36:24 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-23 19:36:24 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-23 19:36:24 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-23 19:36:24 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-23 19:36:24 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-23 19:36:24 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-23 19:36:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:36:24 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-23 19:36:24 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-23 19:36:24 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-23 19:36:24 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-23 19:36:25 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-23 19:36:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-23 19:36:25 LOG3 waittrk: Start waittrk 5 2008-Oct-23 19:36:25 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-23 19:36:25 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-23 19:36:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-23 19:36:30 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-23 19:36:30 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-23 19:36:30 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-23 19:36:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-23 19:36:54 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-23 19:36:54 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-23 19:36:54 INFO2 waittrk: Now tracking galfasrc 2008-Oct-23 19:36:54 LOG4 waittrk: Current telescope position: Az = 356.95 ZA = 8.19 2008-Oct-23 19:36:54 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-23 19:36:54 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-23 19:36:54 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-23 19:36:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:36:54 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-23 19:36:54 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-23 19:36:54 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-23 19:36:54 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-23 19:36:55 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-23 19:36:55 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-23 19:36:55 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-23 19:36:55 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-23 19:36:55 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-23 19:36:55 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-23 19:36:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-23 19:36:55 START begin_task: Starting task 'selecting calibration type' 2008-Oct-23 19:36:55 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-23 19:36:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-23 19:36:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-23 19:36:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:36:55 START begin_task: Starting task 'waiting on setcal' 2008-Oct-23 19:36:55 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-23 19:36:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-23 19:36:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:36:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:36:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-23 19:36:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-23 19:36:55 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-23 19:36:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-23 19:36:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-23 19:36:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-23 19:36:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-23 19:36:55 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-23 19:36:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:36:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-23 19:36:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-23 19:36:55 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-23 19:36:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-23 19:36:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-23 19:36:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-23 19:36:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-23 19:36:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-23 19:36:55 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-23 19:36:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-23 19:36:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-23 19:36:55 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-23 19:36:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-23 19:36:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-23 19:36:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-23 19:36:55 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-23 19:36:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-23 19:36:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-23 19:36:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-23 19:36:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-23 19:36:55 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081023.a2010.0010.fits' is empty! 2008-Oct-23 19:36:55 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-23 19:36:55 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-23 19:36:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-23 19:36:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-23 19:36:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-23 19:36:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 19:36:55 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-23 19:36:56 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 19:36:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-23 19:36:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 19:36:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 19:36:56 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-23 19:36:56 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-23 19:36:56 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-23 19:36:56 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-23 19:36:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-23 19:36:56 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-23 19:36:56 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-23 19:36:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-23 19:36:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:36:56 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-23 19:36:56 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-23 19:36:56 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-23 19:36:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:36:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-23 19:36:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:36:59 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-23 19:36:59 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-23 19:36:59 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-23 19:36:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-23 19:36:59 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-23 19:36:59 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-23 19:36:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-23 19:36:59 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-23 19:36:59 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-23 19:36:59 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-23 19:36:59 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-23 19:36:59 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-23 19:36:59 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-23 19:36:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-23 19:36:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:36:59 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-23 19:36:59 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2008-Oct-23 19:36:59 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2008-Oct-23 19:36:59 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 3 dB 2008-Oct-23 19:36:59 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-23 19:36:59 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-23 19:36:59 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-23 19:36:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.050 1.024 ALFA beam 1: 0.989 0.884 2008-Oct-23 19:36:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.933 0.916 ALFA beam 3: 0.946 1.058 2008-Oct-23 19:36:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.934 1.033 ALFA beam 5: 0.976 1.049 2008-Oct-23 19:36:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.032 0.991 ALFA beam 7: 0.914 0.877 2008-Oct-23 19:36:59 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-23 19:36:59 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-23 19:36:59 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-23 19:37:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:37:00 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-23 19:37:00 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-23 19:37:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-23 19:37:00 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-23 19:37:00 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-23 19:37:00 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-23 19:37:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:37:00 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-23 19:37:00 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-23 19:37:00 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-23 19:37:00 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-23 19:37:00 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-23 19:37:00 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:37:00 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:37:00 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:37:00 LOG2 antvel: Parameters to Doppler: Topocentric 85019 2008 297 0.0 2008-Oct-23 19:37:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:37:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-23 19:37:00 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-23 19:37:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:37:00 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:37:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-23 19:37:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:37:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:37:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:37:00 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-23 19:37:00 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.349446 2008.8153794648515 18.999933 2008-Oct-23 19:37:00 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666593 10.098333333333342 2008-Oct-23 19:37:00 LOG4 log_alfabeam: ALFABEAM 1 21.365204740947114 10.202247818102862 2008-Oct-23 19:37:00 LOG4 log_alfabeam: ALFABEAM 2 21.360743899612338 10.129870731003772 2008-Oct-23 19:37:00 LOG4 log_alfabeam: ALFABEAM 3 21.362158263309876 10.025789138646571 2008-Oct-23 19:37:00 LOG4 log_alfabeam: ALFABEAM 4 21.368157371668133 9.994472497445447 2008-Oct-23 19:37:00 LOG4 log_alfabeam: ALFABEAM 5 21.372634767604357 10.067703330664312 2008-Oct-23 19:37:00 LOG4 log_alfabeam: ALFABEAM 6 21.371096594983648 10.171389355549584 2008-Oct-23 19:37:00 INFO2 take_data: Starting WAPP+GALFA scan: 829700155 2008-Oct-23 19:37:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:37:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:37:00 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-23 19:37:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:37:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-23 19:37:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:37:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:37:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:37:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85021.00 2008-Oct-23 19:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:37:02 LOG3 WAPP=1+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:37:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:02 LOG3 WAPP=2-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:37:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:37:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:37:11 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-23 19:37:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:37:11 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-23 19:37:11 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-23 19:37:11 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-23 19:37:11 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-23 19:37:11 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:37:11 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:37:11 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:37:11 LOG2 antvel: Parameters to Doppler: Topocentric 85031 2008 297 0.0 2008-Oct-23 19:37:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:37:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-23 19:37:11 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-23 19:37:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:37:11 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:37:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-23 19:37:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:37:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:37:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:37:11 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-23 19:37:11 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.352788 2008.8153798451085 18.999933 2008-Oct-23 19:37:11 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666607 10.098333333333334 2008-Oct-23 19:37:11 LOG4 log_alfabeam: ALFABEAM 1 21.365245597167263 10.202371300717509 2008-Oct-23 19:37:11 LOG4 log_alfabeam: ALFABEAM 2 21.360756388603900 10.130377640846419 2008-Oct-23 19:37:11 LOG4 log_alfabeam: ALFABEAM 3 21.362129839614273 10.026176602779483 2008-Oct-23 19:37:11 LOG4 log_alfabeam: ALFABEAM 4 21.368116568997330 9.994346560277720 2008-Oct-23 19:37:11 LOG4 log_alfabeam: ALFABEAM 5 21.372622638501987 10.067192745231406 2008-Oct-23 19:37:11 LOG4 log_alfabeam: ALFABEAM 6 21.371125209285307 10.171008732200146 2008-Oct-23 19:37:11 INFO2 take_data: Starting WAPP+GALFA scan: 829700156 2008-Oct-23 19:37:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:37:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:37:12 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-23 19:37:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:37:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-23 19:37:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:37:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:37:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:37:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85033.00 2008-Oct-23 19:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:37:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:37:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:37:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:37:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:37:23 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-23 19:37:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:37:23 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-23 19:37:23 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-23 19:37:23 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-23 19:37:23 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-23 19:37:23 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:37:23 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:37:23 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:37:23 LOG2 antvel: Parameters to Doppler: Topocentric 85043 2008 297 0.0 2008-Oct-23 19:37:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:37:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-23 19:37:23 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-23 19:37:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:37:23 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:37:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-23 19:37:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:37:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:37:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:37:23 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-23 19:37:23 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.356131 2008.8153802253657 18.999933 2008-Oct-23 19:37:23 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666529 10.098333333333333 2008-Oct-23 19:37:23 LOG4 log_alfabeam: ALFABEAM 1 21.365286531239427 10.202491368582006 2008-Oct-23 19:37:23 LOG4 log_alfabeam: ALFABEAM 2 21.360769085282811 10.130883832454233 2008-Oct-23 19:37:23 LOG4 log_alfabeam: ALFABEAM 3 21.362101548895559 10.026566777839088 2008-Oct-23 19:37:23 LOG4 log_alfabeam: ALFABEAM 4 21.368075686596029 9.994224029096413 2008-Oct-23 19:37:23 LOG4 log_alfabeam: ALFABEAM 5 21.372610299067205 10.066682810918998 2008-Oct-23 19:37:23 LOG4 log_alfabeam: ALFABEAM 6 21.371153696112348 10.170625369187194 2008-Oct-23 19:37:23 INFO2 take_data: Starting WAPP+GALFA scan: 829700157 2008-Oct-23 19:37:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:37:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:37:24 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-23 19:37:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:37:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-23 19:37:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:37:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:37:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:37:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85045.00 2008-Oct-23 19:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:37:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:37:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:37:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:37:35 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-23 19:37:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:37:35 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-23 19:37:35 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-23 19:37:35 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-23 19:37:35 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-23 19:37:35 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:37:35 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:37:35 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:37:35 LOG2 antvel: Parameters to Doppler: Topocentric 85055 2008 297 0.0 2008-Oct-23 19:37:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:37:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-23 19:37:35 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-23 19:37:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:37:35 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:37:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-23 19:37:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:37:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:37:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:37:35 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-23 19:37:35 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.359473 2008.8153806056227 18.999933 2008-Oct-23 19:37:35 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666507 10.098333333333336 2008-Oct-23 19:37:35 LOG4 log_alfabeam: ALFABEAM 1 21.365327514463218 10.202607933159440 2008-Oct-23 19:37:35 LOG4 log_alfabeam: ALFABEAM 2 21.360781980955846 10.131388949080790 2008-Oct-23 19:37:35 LOG4 log_alfabeam: ALFABEAM 3 21.362073411206829 10.026959392353353 2008-Oct-23 19:37:35 LOG4 log_alfabeam: ALFABEAM 4 21.368034753120664 9.994104994421786 2008-Oct-23 19:37:35 LOG4 log_alfabeam: ALFABEAM 5 21.372597757701545 10.066173887422176 2008-Oct-23 19:37:35 LOG4 log_alfabeam: ALFABEAM 6 21.371182035259622 10.170239532434273 2008-Oct-23 19:37:35 INFO2 take_data: Starting WAPP+GALFA scan: 829700158 2008-Oct-23 19:37:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:37:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:37:36 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-23 19:37:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:37:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-23 19:37:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:37:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:37:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:37:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85057.00 2008-Oct-23 19:37:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:37:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:37:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:37:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:37:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:37:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:37:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:37:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:37:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:37:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:37:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:37:47 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-23 19:37:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:37:47 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-23 19:37:47 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-23 19:37:47 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-23 19:37:47 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-23 19:37:47 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:37:47 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:37:47 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:37:47 LOG2 antvel: Parameters to Doppler: Topocentric 85067 2008 297 0.0 2008-Oct-23 19:37:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:37:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-23 19:37:47 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-23 19:37:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:37:47 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:37:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-23 19:37:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:37:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:37:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:37:47 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-23 19:37:47 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.362815 2008.8153809858798 18.999933 2008-Oct-23 19:37:47 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666536 10.098333333333334 2008-Oct-23 19:37:47 LOG4 log_alfabeam: ALFABEAM 1 21.365368554839712 10.202721015264373 2008-Oct-23 19:37:47 LOG4 log_alfabeam: ALFABEAM 2 21.360795078227316 10.131893088618746 2008-Oct-23 19:37:47 LOG4 log_alfabeam: ALFABEAM 3 21.362045421148750 10.027354523765194 2008-Oct-23 19:37:47 LOG4 log_alfabeam: ALFABEAM 4 21.367993760572737 9.993989435216813 2008-Oct-23 19:37:47 LOG4 log_alfabeam: ALFABEAM 5 21.372585011829720 10.065665876476274 2008-Oct-23 19:37:47 LOG4 log_alfabeam: ALFABEAM 6 21.371210232146669 10.169851145079436 2008-Oct-23 19:37:47 INFO2 take_data: Starting WAPP+GALFA scan: 829700159 2008-Oct-23 19:37:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:37:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:37:48 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-23 19:37:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:37:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-23 19:37:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:37:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:37:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:37:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85069.00 2008-Oct-23 19:37:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:37:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:37:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:37:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:37:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:37:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:37:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:37:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:37:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:37:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:37:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:37:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:37:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:37:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:37:59 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-23 19:37:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:37:59 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-23 19:37:59 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-23 19:37:59 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-23 19:37:59 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-23 19:37:59 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:37:59 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:37:59 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:37:59 LOG2 antvel: Parameters to Doppler: Topocentric 85079 2008 297 0.0 2008-Oct-23 19:37:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:37:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-23 19:37:59 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-23 19:37:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:37:59 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:37:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-23 19:37:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:37:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:37:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:37:59 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-23 19:37:59 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.366158 2008.8153813661368 18.999933 2008-Oct-23 19:37:59 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666745 10.098333333333329 2008-Oct-23 19:37:59 LOG4 log_alfabeam: ALFABEAM 1 21.365409660417264 10.202830632635330 2008-Oct-23 19:37:59 LOG4 log_alfabeam: ALFABEAM 2 21.360808379876403 10.132396348057229 2008-Oct-23 19:37:59 LOG4 log_alfabeam: ALFABEAM 3 21.362017573454530 10.027752251698191 2008-Oct-23 19:37:59 LOG4 log_alfabeam: ALFABEAM 4 21.367952700906692 9.993877333515979 2008-Oct-23 19:37:59 LOG4 log_alfabeam: ALFABEAM 5 21.372572058698264 10.065158680670939 2008-Oct-23 19:37:59 LOG4 log_alfabeam: ALFABEAM 6 21.371238292066188 10.169460128052206 2008-Oct-23 19:37:59 INFO2 take_data: Starting WAPP+GALFA scan: 829700160 2008-Oct-23 19:38:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:38:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:38:00 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-23 19:38:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:38:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-23 19:38:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:38:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:38:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:38:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85081.00 2008-Oct-23 19:38:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:38:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:38:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:38:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:38:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:38:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:38:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:38:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:38:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:38:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:38:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:38:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:38:11 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-23 19:38:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:38:11 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-23 19:38:11 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-23 19:38:11 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-23 19:38:11 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-23 19:38:11 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:38:11 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:38:11 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:38:11 LOG2 antvel: Parameters to Doppler: Topocentric 85091 2008 297 0.0 2008-Oct-23 19:38:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:38:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-23 19:38:11 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-23 19:38:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:38:11 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:38:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-23 19:38:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:38:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:38:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:38:11 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-23 19:38:11 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.369500 2008.8153817463938 18.999933 2008-Oct-23 19:38:11 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666106 10.098333333333342 2008-Oct-23 19:38:11 LOG4 log_alfabeam: ALFABEAM 1 21.365450802326976 10.202936706262335 2008-Oct-23 19:38:11 LOG4 log_alfabeam: ALFABEAM 2 21.360821876657369 10.132898373202085 2008-Oct-23 19:38:11 LOG4 log_alfabeam: ALFABEAM 3 21.361989887780311 10.028152297667578 2008-Oct-23 19:38:11 LOG4 log_alfabeam: ALFABEAM 4 21.367911602951867 9.993768770335775 2008-Oct-23 19:38:11 LOG4 log_alfabeam: ALFABEAM 5 21.372558907272911 10.064652657348590 2008-Oct-23 19:38:11 LOG4 log_alfabeam: ALFABEAM 6 21.371266195193609 10.169066754386510 2008-Oct-23 19:38:11 INFO2 take_data: Starting WAPP+GALFA scan: 829700161 2008-Oct-23 19:38:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:38:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:38:12 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-23 19:38:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:38:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-23 19:38:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:38:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:38:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:38:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85093.00 2008-Oct-23 19:38:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:38:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:38:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:38:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:38:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:38:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:38:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:38:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:38:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:38:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:38:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:38:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:38:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:38:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:38:23 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-23 19:38:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:38:23 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-23 19:38:23 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-23 19:38:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-23 19:38:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-23 19:38:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 19:38:23 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-23 19:38:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 19:38:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-23 19:38:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 19:38:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 19:38:23 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-23 19:38:23 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-23 19:38:23 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-23 19:38:23 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-23 19:38:23 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:38:23 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:38:23 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:38:23 LOG2 antvel: Parameters to Doppler: Topocentric 85103 2008 297 0.0 2008-Oct-23 19:38:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:38:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-23 19:38:23 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-23 19:38:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:38:23 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:38:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-23 19:38:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:38:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:38:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:38:23 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-23 19:38:23 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.372843 2008.815382126651 18.999933 2008-Oct-23 19:38:23 LOG4 log_alfabeam: ALFABEAM 0 21.366666666665164 10.098333333333342 2008-Oct-23 19:38:23 LOG4 log_alfabeam: ALFABEAM 1 21.365492000900460 10.203039287298790 2008-Oct-23 19:38:23 LOG4 log_alfabeam: ALFABEAM 2 21.360835575287556 10.133399411676738 2008-Oct-23 19:38:23 LOG4 log_alfabeam: ALFABEAM 3 21.361962350502541 10.028554859732465 2008-Oct-23 19:38:23 LOG4 log_alfabeam: ALFABEAM 4 21.367870446399273 9.993663693556181 2008-Oct-23 19:38:23 LOG4 log_alfabeam: ALFABEAM 5 21.372545550966613 10.064147557313559 2008-Oct-23 19:38:23 LOG4 log_alfabeam: ALFABEAM 6 21.371293955236286 10.168670828594053 2008-Oct-23 19:38:23 INFO2 take_data: Starting WAPP+GALFA scan: 829700162 2008-Oct-23 19:38:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:38:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:38:24 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-23 19:38:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:38:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-23 19:38:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:38:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:38:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:38:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85105.00 2008-Oct-23 19:38:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:38:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:38:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:38:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:38:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:38:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:38:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:38:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:38:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:38:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:38:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:38:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:38:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:38:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:38:35 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-23 19:38:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:38:35 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-23 19:38:35 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-23 19:38:35 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-23 19:38:35 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-23 19:38:35 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:38:35 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:38:35 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:38:35 LOG2 antvel: Parameters to Doppler: Topocentric 85115 2008 297 0.0 2008-Oct-23 19:38:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:38:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-23 19:38:35 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-23 19:38:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:38:35 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:38:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-23 19:38:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:38:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:38:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:38:35 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-23 19:38:35 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.376185 2008.815382506908 18.999933 2008-Oct-23 19:38:35 LOG4 log_alfabeam: ALFABEAM 0 21.366666666667363 10.098333333333327 2008-Oct-23 19:38:35 LOG4 log_alfabeam: ALFABEAM 1 21.365533227168882 10.203138303169649 2008-Oct-23 19:38:35 LOG4 log_alfabeam: ALFABEAM 2 21.360849466154747 10.133899111287914 2008-Oct-23 19:38:35 LOG4 log_alfabeam: ALFABEAM 3 21.361934980999155 10.028959654954287 2008-Oct-23 19:38:35 LOG4 log_alfabeam: ALFABEAM 4 21.367829260176233 9.993562177771128 2008-Oct-23 19:38:35 LOG4 log_alfabeam: ALFABEAM 5 21.372531999118806 10.063643736035569 2008-Oct-23 19:38:35 LOG4 log_alfabeam: ALFABEAM 6 21.371321552643231 10.168272628237057 2008-Oct-23 19:38:35 INFO2 take_data: Starting WAPP+GALFA scan: 829700163 2008-Oct-23 19:38:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:38:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:38:36 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-23 19:38:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:38:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-23 19:38:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:38:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:38:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:38:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85117.00 2008-Oct-23 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:38:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:38:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:38:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:38:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:38:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:38:47 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-23 19:38:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:38:47 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-23 19:38:47 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-23 19:38:47 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-23 19:38:47 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-23 19:38:47 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:38:47 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:38:47 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:38:47 LOG2 antvel: Parameters to Doppler: Topocentric 85127 2008 297 0.0 2008-Oct-23 19:38:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:38:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-23 19:38:47 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-23 19:38:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:38:47 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:38:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-23 19:38:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:38:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:38:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:38:47 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-23 19:38:47 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.379528 2008.815382887165 18.999933 2008-Oct-23 19:38:47 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666820 10.098333333333334 2008-Oct-23 19:38:47 LOG4 log_alfabeam: ALFABEAM 1 21.365574501490141 10.203233803044032 2008-Oct-23 19:38:47 LOG4 log_alfabeam: ALFABEAM 2 21.360863556085512 10.134397718996162 2008-Oct-23 19:38:47 LOG4 log_alfabeam: ALFABEAM 3 21.361907765733527 10.029366882716280 2008-Oct-23 19:38:47 LOG4 log_alfabeam: ALFABEAM 4 21.367788023938697 9.993464172843163 2008-Oct-23 19:38:47 LOG4 log_alfabeam: ALFABEAM 5 21.372518245020537 10.063140944960107 2008-Oct-23 19:38:47 LOG4 log_alfabeam: ALFABEAM 6 21.371349001030065 10.167871956488641 2008-Oct-23 19:38:47 INFO2 take_data: Starting WAPP+GALFA scan: 829700164 2008-Oct-23 19:38:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:38:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:38:48 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-23 19:38:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:38:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-23 19:38:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:38:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:38:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:38:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85129.00 2008-Oct-23 19:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:38:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:38:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:38:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:38:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:38:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:38:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:38:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:38:59 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-23 19:38:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:38:59 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-23 19:38:59 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-23 19:38:59 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-23 19:38:59 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-23 19:38:59 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:38:59 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:38:59 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:38:59 LOG2 antvel: Parameters to Doppler: Topocentric 85139 2008 297 0.0 2008-Oct-23 19:38:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:38:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-23 19:38:59 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-23 19:38:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:38:59 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:38:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-23 19:38:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:38:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:38:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:38:59 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-23 19:38:59 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.382870 2008.815383267422 18.999933 2008-Oct-23 19:38:59 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666983 10.098333333333333 2008-Oct-23 19:38:59 LOG4 log_alfabeam: ALFABEAM 1 21.365615794837549 10.203325720832769 2008-Oct-23 19:38:59 LOG4 log_alfabeam: ALFABEAM 2 21.360877835111179 10.134894884844378 2008-Oct-23 19:38:59 LOG4 log_alfabeam: ALFABEAM 3 21.361880723786150 10.029776255814635 2008-Oct-23 19:38:59 LOG4 log_alfabeam: ALFABEAM 4 21.367746766689663 9.993369746889538 2008-Oct-23 19:38:59 LOG4 log_alfabeam: ALFABEAM 5 21.372504298386215 10.062639537444307 2008-Oct-23 19:38:59 LOG4 log_alfabeam: ALFABEAM 6 21.371376281131251 10.167469095257941 2008-Oct-23 19:38:59 INFO2 take_data: Starting WAPP+GALFA scan: 829700165 2008-Oct-23 19:39:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:39:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:39:00 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-23 19:39:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:39:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-23 19:39:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:39:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:39:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:39:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85141.00 2008-Oct-23 19:39:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:39:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:39:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:39:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:39:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:39:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:39:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:39:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:39:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:39:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:39:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:39:11 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-23 19:39:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:39:11 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-23 19:39:11 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-23 19:39:11 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-23 19:39:11 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-23 19:39:11 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:39:11 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:39:11 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:39:11 LOG2 antvel: Parameters to Doppler: Topocentric 85151 2008 297 0.0 2008-Oct-23 19:39:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:39:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-23 19:39:11 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-23 19:39:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:39:11 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:39:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-23 19:39:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:39:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:39:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:39:11 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-23 19:39:11 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.386213 2008.8153836476793 18.999933 2008-Oct-23 19:39:11 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666827 10.098333333333331 2008-Oct-23 19:39:11 LOG4 log_alfabeam: ALFABEAM 1 21.365657127580072 10.203414103717192 2008-Oct-23 19:39:11 LOG4 log_alfabeam: ALFABEAM 2 21.360892310171991 10.135390855112803 2008-Oct-23 19:39:11 LOG4 log_alfabeam: ALFABEAM 3 21.361853841715831 10.030187974943326 2008-Oct-23 19:39:11 LOG4 log_alfabeam: ALFABEAM 4 21.367705468072995 9.993278851758999 2008-Oct-23 19:39:11 LOG4 log_alfabeam: ALFABEAM 5 21.372490152396185 10.062139265591881 2008-Oct-23 19:39:11 LOG4 log_alfabeam: ALFABEAM 6 21.371403406477892 10.167063846393420 2008-Oct-23 19:39:11 INFO2 take_data: Starting WAPP+GALFA scan: 829700166 2008-Oct-23 19:39:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:39:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:39:12 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-23 19:39:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:39:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-23 19:39:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:39:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:39:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:39:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85153.00 2008-Oct-23 19:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:39:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:39:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:39:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:39:23 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-23 19:39:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:39:23 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-23 19:39:23 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-23 19:39:23 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-23 19:39:23 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-23 19:39:23 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:39:23 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:39:23 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:39:23 LOG2 antvel: Parameters to Doppler: Topocentric 85163 2008 297 0.0 2008-Oct-23 19:39:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:39:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-23 19:39:23 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-23 19:39:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:39:23 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:39:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-23 19:39:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:39:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:39:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:39:23 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-23 19:39:23 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.389555 2008.8153840279363 18.999933 2008-Oct-23 19:39:23 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666827 10.098333333333334 2008-Oct-23 19:39:23 LOG4 log_alfabeam: ALFABEAM 1 21.365698470643437 10.203498892132306 2008-Oct-23 19:39:23 LOG4 log_alfabeam: ALFABEAM 2 21.360906970945074 10.135885282312076 2008-Oct-23 19:39:23 LOG4 log_alfabeam: ALFABEAM 3 21.361827138291279 10.030601748831204 2008-Oct-23 19:39:23 LOG4 log_alfabeam: ALFABEAM 4 21.367664157137014 9.993191549051149 2008-Oct-23 19:39:23 LOG4 log_alfabeam: ALFABEAM 5 21.372475817112388 10.061640480411317 2008-Oct-23 19:39:23 LOG4 log_alfabeam: ALFABEAM 6 21.371430358101328 10.166656495960344 2008-Oct-23 19:39:23 INFO2 take_data: Starting WAPP+GALFA scan: 829700167 2008-Oct-23 19:39:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:39:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:39:24 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-23 19:39:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:39:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-23 19:39:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:39:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:39:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:39:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85165.00 2008-Oct-23 19:39:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:39:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:39:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:39:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:39:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:39:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:39:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:39:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:39:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:39:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:35 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 19:39:35.296 (seconds: 70775.296)!} 2008-Oct-23 19:39:35 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 19:39:35.296 (seconds: 70775.296)! 2008-Oct-23 19:39:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:39:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:39:35 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-23 19:39:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:39:35 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-23 19:39:35 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-23 19:39:35 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-23 19:39:35 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-23 19:39:35 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:39:35 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:39:35 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:39:35 LOG2 antvel: Parameters to Doppler: Topocentric 85175 2008 297 0.0 2008-Oct-23 19:39:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:39:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-23 19:39:35 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-23 19:39:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:39:35 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:39:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-23 19:39:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:39:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:39:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:39:35 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-23 19:39:35 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.392898 2008.8153844081933 18.999933 2008-Oct-23 19:39:35 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666774 10.098333333333334 2008-Oct-23 19:39:35 LOG4 log_alfabeam: ALFABEAM 1 21.365739844416723 10.203580131265513 2008-Oct-23 19:39:35 LOG4 log_alfabeam: ALFABEAM 2 21.360921824480787 10.136378412025465 2008-Oct-23 19:39:35 LOG4 log_alfabeam: ALFABEAM 3 21.361800600162372 10.031017779472743 2008-Oct-23 19:39:35 LOG4 log_alfabeam: ALFABEAM 4 21.367622813506554 9.993107792606637 2008-Oct-23 19:39:35 LOG4 log_alfabeam: ALFABEAM 5 21.372461285611934 10.061142934680619 2008-Oct-23 19:39:35 LOG4 log_alfabeam: ALFABEAM 6 21.371457149442914 10.166246844493147 2008-Oct-23 19:39:35 INFO2 take_data: Starting WAPP+GALFA scan: 829700168 2008-Oct-23 19:39:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:39:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:39:36 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-23 19:39:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:39:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-23 19:39:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:39:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:39:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:39:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85177.00 2008-Oct-23 19:39:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:39:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:39:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:39:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:39:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:39:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:39:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:39:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:39:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:39:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:39:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:39:47 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-23 19:39:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:39:47 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-23 19:39:47 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Oct-23 19:39:47 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-23 19:39:47 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-23 19:39:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-23 19:39:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-23 19:39:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 19:39:47 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-23 19:39:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 19:39:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-23 19:39:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 19:39:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 19:39:47 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-23 19:39:47 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-23 19:39:47 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-23 19:39:47 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-23 19:39:47 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-23 19:39:47 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:39:47 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81538 J 2008-Oct-23 19:39:47 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:39:47 LOG2 antvel: Parameters to Doppler: Topocentric 85187 2008 297 0.0 2008-Oct-23 19:39:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:39:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-23 19:39:47 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-23 19:39:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:39:47 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:39:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-23 19:39:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:39:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:39:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:39:48 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-23 19:39:48 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.396240 2008.8153847884503 18.999933 2008-Oct-23 19:39:48 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666664 10.098333333333334 2008-Oct-23 19:39:48 LOG4 log_alfabeam: ALFABEAM 1 21.365781219795632 10.203657768100815 2008-Oct-23 19:39:48 LOG4 log_alfabeam: ALFABEAM 2 21.360936860113071 10.136869899456336 2008-Oct-23 19:39:48 LOG4 log_alfabeam: ALFABEAM 3 21.361774245778349 10.031435771734204 2008-Oct-23 19:39:48 LOG4 log_alfabeam: ALFABEAM 4 21.367581466263569 9.993027637480127 2008-Oct-23 19:39:48 LOG4 log_alfabeam: ALFABEAM 5 21.372446568305620 10.060646976829743 2008-Oct-23 19:39:48 LOG4 log_alfabeam: ALFABEAM 6 21.371483761843471 10.165835182015542 2008-Oct-23 19:39:48 INFO2 take_data: Starting WAPP+GALFA scan: 829700169 2008-Oct-23 19:39:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:39:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:39:48 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-23 19:39:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:39:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-23 19:39:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:39:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:39:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:39:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85189.00 2008-Oct-23 19:39:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:39:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:39:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:39:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:39:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:39:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:39:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:39:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:39:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:39:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:39:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:39:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:39:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:39:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:39:59 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-23 19:39:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:39:59 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-23 19:39:59 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-23 19:39:59 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-23 19:39:59 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-23 19:39:59 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:39:59 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:39:59 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:39:59 LOG2 antvel: Parameters to Doppler: Topocentric 85199 2008 297 0.0 2008-Oct-23 19:39:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:39:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-23 19:39:59 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-23 19:39:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:39:59 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:39:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-23 19:39:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:39:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:39:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:39:59 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-23 19:39:59 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.399583 2008.8153851687073 18.999933 2008-Oct-23 19:39:59 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666791 10.098333333333338 2008-Oct-23 19:39:59 LOG4 log_alfabeam: ALFABEAM 1 21.365822617188769 10.203731845822988 2008-Oct-23 19:39:59 LOG4 log_alfabeam: ALFABEAM 2 21.360952085002783 10.137359989472630 2008-Oct-23 19:39:59 LOG4 log_alfabeam: ALFABEAM 3 21.361748061882093 10.031855928901026 2008-Oct-23 19:39:59 LOG4 log_alfabeam: ALFABEAM 4 21.367540095014075 9.992951039512395 2008-Oct-23 19:39:59 LOG4 log_alfabeam: ALFABEAM 5 21.372431658160533 10.060152360328770 2008-Oct-23 19:39:59 LOG4 log_alfabeam: ALFABEAM 6 21.371510208654318 10.165421307757716 2008-Oct-23 19:39:59 INFO2 take_data: Starting WAPP+GALFA scan: 829700170 2008-Oct-23 19:40:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:40:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:40:00 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-23 19:40:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:40:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-23 19:40:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:40:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:40:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:40:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85201.00 2008-Oct-23 19:40:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:40:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:40:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:40:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:40:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:40:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:40:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:40:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:40:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:40:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:40:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:40:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:40:11 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-23 19:40:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:40:11 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-23 19:40:11 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-23 19:40:11 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-23 19:40:11 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-23 19:40:11 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:40:11 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:40:11 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:40:11 LOG2 antvel: Parameters to Doppler: Topocentric 85211 2008 297 0.0 2008-Oct-23 19:40:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:40:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-23 19:40:11 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-23 19:40:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:40:11 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:40:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-23 19:40:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:40:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:40:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:40:11 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-23 19:40:11 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.402925 2008.8153855489645 18.999933 2008-Oct-23 19:40:11 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666774 10.098333333333340 2008-Oct-23 19:40:11 LOG4 log_alfabeam: ALFABEAM 1 21.365864007480994 10.203802317976272 2008-Oct-23 19:40:11 LOG4 log_alfabeam: ALFABEAM 2 21.360967488148603 10.137848340189494 2008-Oct-23 19:40:11 LOG4 log_alfabeam: ALFABEAM 3 21.361722066591028 10.032277952189375 2008-Oct-23 19:40:11 LOG4 log_alfabeam: ALFABEAM 4 21.367498728854056 9.992878047199033 2008-Oct-23 19:40:11 LOG4 log_alfabeam: ALFABEAM 5 21.372416565928344 10.059659430804633 2008-Oct-23 19:40:11 LOG4 log_alfabeam: ALFABEAM 6 21.371536471537560 10.165005515495752 2008-Oct-23 19:40:11 INFO2 take_data: Starting WAPP+GALFA scan: 829700171 2008-Oct-23 19:40:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:40:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:40:12 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-23 19:40:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:40:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-23 19:40:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:40:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:40:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:40:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85213.00 2008-Oct-23 19:40:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:40:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:40:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:40:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:40:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:40:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:40:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:40:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:40:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:40:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:40:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:40:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:40:23 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-23 19:40:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:40:23 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-23 19:40:23 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-23 19:40:23 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-23 19:40:23 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-23 19:40:23 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:40:23 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:40:23 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:40:23 LOG2 antvel: Parameters to Doppler: Topocentric 85223 2008 297 0.0 2008-Oct-23 19:40:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:40:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-23 19:40:23 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-23 19:40:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:40:23 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:40:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-23 19:40:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:40:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:40:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:40:23 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-23 19:40:23 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.406267 2008.8153859292215 18.999933 2008-Oct-23 19:40:23 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666703 10.098333333333336 2008-Oct-23 19:40:23 LOG4 log_alfabeam: ALFABEAM 1 21.365905398712847 10.203869206253927 2008-Oct-23 19:40:23 LOG4 log_alfabeam: ALFABEAM 2 21.360983072130882 10.138335050355833 2008-Oct-23 19:40:23 LOG4 log_alfabeam: ALFABEAM 3 21.361696254437465 10.032701919021136 2008-Oct-23 19:40:23 LOG4 log_alfabeam: ALFABEAM 4 21.367457359749917 9.992808638624130 2008-Oct-23 19:40:23 LOG4 log_alfabeam: ALFABEAM 5 21.372401289064751 10.059168089216485 2008-Oct-23 19:40:23 LOG4 log_alfabeam: ALFABEAM 6 21.371562555974730 10.164587728469396 2008-Oct-23 19:40:23 INFO2 take_data: Starting WAPP+GALFA scan: 829700172 2008-Oct-23 19:40:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:40:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:40:24 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-23 19:40:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:40:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-23 19:40:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:40:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:40:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:40:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85225.00 2008-Oct-23 19:40:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:40:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:40:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:40:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:40:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:40:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:40:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:40:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:40:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:40:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:40:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:40:35 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-23 19:40:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:40:35 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-23 19:40:35 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-23 19:40:35 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-23 19:40:35 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-23 19:40:35 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:40:35 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:40:35 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:40:35 LOG2 antvel: Parameters to Doppler: Topocentric 85235 2008 297 0.0 2008-Oct-23 19:40:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:40:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-23 19:40:35 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-23 19:40:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:40:35 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:40:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-23 19:40:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:40:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:40:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:40:35 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-23 19:40:35 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.409610 2008.8153863094785 18.999933 2008-Oct-23 19:40:35 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666664 10.098333333333336 2008-Oct-23 19:40:35 LOG4 log_alfabeam: ALFABEAM 1 21.365946798933766 10.203932529192564 2008-Oct-23 19:40:35 LOG4 log_alfabeam: ALFABEAM 2 21.360998839693021 10.138820217363104 2008-Oct-23 19:40:35 LOG4 log_alfabeam: ALFABEAM 3 21.361670620110267 10.033127908619736 2008-Oct-23 19:40:35 LOG4 log_alfabeam: ALFABEAM 4 21.367415979657377 9.992742795026922 2008-Oct-23 19:40:35 LOG4 log_alfabeam: ALFABEAM 5 21.372385824859066 10.058678237837187 2008-Oct-23 19:40:35 LOG4 log_alfabeam: ALFABEAM 6 21.371588467294615 10.164167868079762 2008-Oct-23 19:40:35 INFO2 take_data: Starting WAPP+GALFA scan: 829700173 2008-Oct-23 19:40:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:40:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:40:36 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-23 19:40:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:40:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-23 19:40:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:40:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:40:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:40:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85237.00 2008-Oct-23 19:40:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:40:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:40:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:40:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:40:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:40:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:40:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:40:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:40:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:40:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:40:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:40:47 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-23 19:40:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:40:47 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-23 19:40:47 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-23 19:40:47 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-23 19:40:47 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-23 19:40:47 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:40:47 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:40:47 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:40:47 LOG2 antvel: Parameters to Doppler: Topocentric 85247 2008 297 0.0 2008-Oct-23 19:40:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:40:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-23 19:40:47 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-23 19:40:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:40:47 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:40:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-23 19:40:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:40:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:40:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:40:47 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-23 19:40:47 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.412952 2008.8153866897355 18.999933 2008-Oct-23 19:40:47 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666710 10.098333333333333 2008-Oct-23 19:40:47 LOG4 log_alfabeam: ALFABEAM 1 21.365988179050031 10.203992250168298 2008-Oct-23 19:40:47 LOG4 log_alfabeam: ALFABEAM 2 21.361014779349240 10.139303504089574 2008-Oct-23 19:40:47 LOG4 log_alfabeam: ALFABEAM 3 21.361645181211639 10.033555617138315 2008-Oct-23 19:40:47 LOG4 log_alfabeam: ALFABEAM 4 21.367374617658424 9.992680555067686 2008-Oct-23 19:40:47 LOG4 log_alfabeam: ALFABEAM 5 21.372370184560076 10.058190217683258 2008-Oct-23 19:40:47 LOG4 log_alfabeam: ALFABEAM 6 21.371614187661198 10.163746233330896 2008-Oct-23 19:40:47 INFO2 take_data: Starting WAPP+GALFA scan: 829700174 2008-Oct-23 19:40:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:40:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:40:48 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-23 19:40:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:40:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-23 19:40:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:40:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:40:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:40:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85249.00 2008-Oct-23 19:40:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:40:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:40:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:40:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:40:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:40:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:40:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:40:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:40:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:40:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:40:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:40:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:40:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:40:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:40:59 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-23 19:40:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:40:59 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-23 19:40:59 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-23 19:40:59 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-23 19:40:59 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-23 19:40:59 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:40:59 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:40:59 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:40:59 LOG2 antvel: Parameters to Doppler: Topocentric 85259 2008 297 0.0 2008-Oct-23 19:40:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:40:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-23 19:40:59 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-23 19:40:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:40:59 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:40:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-23 19:40:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:40:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-23 19:40:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:40:59 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-23 19:40:59 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.416295 2008.8153870699925 18.999933 2008-Oct-23 19:40:59 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666692 10.098333333333333 2008-Oct-23 19:40:59 LOG4 log_alfabeam: ALFABEAM 1 21.366029559510388 10.204048407306177 2008-Oct-23 19:40:59 LOG4 log_alfabeam: ALFABEAM 2 21.361030898534302 10.139785153524654 2008-Oct-23 19:40:59 LOG4 log_alfabeam: ALFABEAM 3 21.361619924720824 10.033985251054547 2008-Oct-23 19:40:59 LOG4 log_alfabeam: ALFABEAM 4 21.367333253315792 9.992621879640442 2008-Oct-23 19:40:59 LOG4 log_alfabeam: ALFABEAM 5 21.372354360858413 10.057703784042889 2008-Oct-23 19:40:59 LOG4 log_alfabeam: ALFABEAM 6 21.371639730194261 10.163322620229227 2008-Oct-23 19:40:59 INFO2 take_data: Starting WAPP+GALFA scan: 829700175 2008-Oct-23 19:41:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:41:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:41:00 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-23 19:41:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:41:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-23 19:41:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:41:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:41:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:41:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85261.00 2008-Oct-23 19:41:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:41:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:41:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:41:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:41:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:41:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:41:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:41:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:41:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:41:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:41:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:41:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:41:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:41:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:41:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:41:11 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-23 19:41:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:41:11 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-23 19:41:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-23 19:41:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-23 19:41:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-23 19:41:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 19:41:11 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-23 19:41:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 19:41:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-23 19:41:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 19:41:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 19:41:11 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-23 19:41:11 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-23 19:41:11 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-23 19:41:11 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-23 19:41:11 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:41:11 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:41:11 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:41:11 LOG2 antvel: Parameters to Doppler: Topocentric 85271 2008 297 0.0 2008-Oct-23 19:41:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:41:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-23 19:41:11 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-23 19:41:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:41:11 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:41:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-23 19:41:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:41:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:41:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:41:11 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-23 19:41:11 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.419637 2008.8153874502498 18.999933 2008-Oct-23 19:41:11 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666696 10.098333333333338 2008-Oct-23 19:41:11 LOG4 log_alfabeam: ALFABEAM 1 21.366070911259349 10.204100970512608 2008-Oct-23 19:41:11 LOG4 log_alfabeam: ALFABEAM 2 21.361047185451632 10.140264831974758 2008-Oct-23 19:41:11 LOG4 log_alfabeam: ALFABEAM 3 21.361594867884666 10.034416503428808 2008-Oct-23 19:41:11 LOG4 log_alfabeam: ALFABEAM 4 21.367291915677292 9.992566800869476 2008-Oct-23 19:41:11 LOG4 log_alfabeam: ALFABEAM 5 21.372338365321724 10.057219274598731 2008-Oct-23 19:41:11 LOG4 log_alfabeam: ALFABEAM 6 21.371665077404511 10.162897330988567 2008-Oct-23 19:41:11 INFO2 take_data: Starting WAPP+GALFA scan: 829700176 2008-Oct-23 19:41:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:41:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:41:12 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-23 19:41:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:41:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-23 19:41:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:41:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:41:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:41:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85273.00 2008-Oct-23 19:41:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:41:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:41:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:41:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:41:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:41:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:41:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:41:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:41:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:41:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:41:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:41:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:41:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:41:23 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-23 19:41:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:41:23 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-23 19:41:23 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-23 19:41:23 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-23 19:41:23 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-23 19:41:23 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:41:23 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:41:23 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:41:23 LOG2 antvel: Parameters to Doppler: Topocentric 85283 2008 297 0.0 2008-Oct-23 19:41:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:41:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-23 19:41:23 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-23 19:41:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:41:23 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:41:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-23 19:41:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:41:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:41:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:41:23 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-23 19:41:23 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.422980 2008.8153878305068 18.999933 2008-Oct-23 19:41:23 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666674 10.098333333333336 2008-Oct-23 19:41:23 LOG4 log_alfabeam: ALFABEAM 1 21.366112254759301 10.204149975861005 2008-Oct-23 19:41:23 LOG4 log_alfabeam: ALFABEAM 2 21.361063647645867 10.140742781636622 2008-Oct-23 19:41:23 LOG4 log_alfabeam: ALFABEAM 3 21.361569997779487 10.034849582002730 2008-Oct-23 19:41:23 LOG4 log_alfabeam: ALFABEAM 4 21.367250584291476 9.992515281697553 2008-Oct-23 19:41:23 LOG4 log_alfabeam: ALFABEAM 5 21.372322190529783 10.056736445406376 2008-Oct-23 19:41:23 LOG4 log_alfabeam: ALFABEAM 6 21.371690242316411 10.162470160339035 2008-Oct-23 19:41:23 INFO2 take_data: Starting WAPP+GALFA scan: 829700177 2008-Oct-23 19:41:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:41:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:41:24 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-23 19:41:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:41:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-23 19:41:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:41:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:41:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:41:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85285.00 2008-Oct-23 19:41:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:41:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:41:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:41:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:41:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:41:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:41:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:41:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:41:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:41:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:41:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:41:35 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-23 19:41:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:41:35 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-23 19:41:35 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-23 19:41:35 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-23 19:41:35 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-23 19:41:35 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:41:35 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:41:35 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:41:35 LOG2 antvel: Parameters to Doppler: Topocentric 85295 2008 297 0.0 2008-Oct-23 19:41:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:41:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-23 19:41:35 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-23 19:41:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:41:35 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:41:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-23 19:41:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:41:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:41:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:41:35 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-23 19:41:35 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.426322 2008.8153882107638 18.999933 2008-Oct-23 19:41:35 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666692 10.098333333333331 2008-Oct-23 19:41:35 LOG4 log_alfabeam: ALFABEAM 1 21.366153561011945 10.204195399753251 2008-Oct-23 19:41:35 LOG4 log_alfabeam: ALFABEAM 2 21.361080273019983 10.141218672437176 2008-Oct-23 19:41:35 LOG4 log_alfabeam: ALFABEAM 3 21.361545331288436 10.035284176975544 2008-Oct-23 19:41:35 LOG4 log_alfabeam: ALFABEAM 4 21.367209288152921 9.992467347745112 2008-Oct-23 19:41:35 LOG4 log_alfabeam: ALFABEAM 5 21.372305848359119 10.056255630616182 2008-Oct-23 19:41:35 LOG4 log_alfabeam: ALFABEAM 6 21.371715207796264 10.162041413478068 2008-Oct-23 19:41:35 INFO2 take_data: Starting WAPP+GALFA scan: 829700178 2008-Oct-23 19:41:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:41:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:41:36 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-23 19:41:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:41:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-23 19:41:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:41:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:41:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:41:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85297.00 2008-Oct-23 19:41:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:41:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:41:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:41:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:41:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:41:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:41:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:41:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:41:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:41:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:41:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:41:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:41:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:41:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:41:47 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-23 19:41:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:41:47 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-23 19:41:47 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-23 19:41:47 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-23 19:41:47 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-23 19:41:47 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:41:47 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:41:47 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:41:47 LOG2 antvel: Parameters to Doppler: Topocentric 85307 2008 297 0.0 2008-Oct-23 19:41:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:41:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-23 19:41:47 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-23 19:41:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:41:47 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:41:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-23 19:41:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:41:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:41:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:41:47 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-23 19:41:47 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.429665 2008.8153885910208 18.999933 2008-Oct-23 19:41:47 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666710 10.098333333333336 2008-Oct-23 19:41:47 LOG4 log_alfabeam: ALFABEAM 1 21.366194850491848 10.204237276191964 2008-Oct-23 19:41:47 LOG4 log_alfabeam: ALFABEAM 2 21.361097069228993 10.141692745753756 2008-Oct-23 19:41:47 LOG4 log_alfabeam: ALFABEAM 3 21.361520855587408 10.035720497345338 2008-Oct-23 19:41:47 LOG4 log_alfabeam: ALFABEAM 4 21.367168006797531 9.992422964022669 2008-Oct-23 19:41:47 LOG4 log_alfabeam: ALFABEAM 5 21.372289331278299 10.055776587077089 2008-Oct-23 19:41:47 LOG4 log_alfabeam: ALFABEAM 6 21.371739986771452 10.161610883866716 2008-Oct-23 19:41:47 INFO2 take_data: Starting WAPP+GALFA scan: 829700179 2008-Oct-23 19:41:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:41:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:41:48 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-23 19:41:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:41:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-23 19:41:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:41:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:41:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:41:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85309.00 2008-Oct-23 19:41:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:41:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:41:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:41:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:41:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:41:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:41:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:41:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:41:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:41:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:41:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:41:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:41:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:41:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:41:59 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-23 19:41:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:41:59 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-23 19:41:59 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-23 19:41:59 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-23 19:41:59 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-23 19:41:59 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:41:59 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:41:59 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:41:59 LOG2 antvel: Parameters to Doppler: Topocentric 85319 2008 297 0.0 2008-Oct-23 19:41:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:41:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-23 19:41:59 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-23 19:41:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:41:59 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:41:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-23 19:41:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:41:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:41:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:41:59 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-23 19:41:59 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.433007 2008.8153889712778 18.999933 2008-Oct-23 19:41:59 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666656 10.098333333333334 2008-Oct-23 19:41:59 LOG4 log_alfabeam: ALFABEAM 1 21.366236094276463 10.204275588027022 2008-Oct-23 19:41:59 LOG4 log_alfabeam: ALFABEAM 2 21.361114023886437 10.142164675317220 2008-Oct-23 19:41:59 LOG4 log_alfabeam: ALFABEAM 3 21.361496587187492 10.036158230685576 2008-Oct-23 19:41:59 LOG4 log_alfabeam: ALFABEAM 4 21.367126769147760 9.992382149691728 2008-Oct-23 19:41:59 LOG4 log_alfabeam: ALFABEAM 5 21.372272651462076 10.055299645217616 2008-Oct-23 19:41:59 LOG4 log_alfabeam: ALFABEAM 6 21.371764562471874 10.161178879455864 2008-Oct-23 19:41:59 INFO2 take_data: Starting WAPP+GALFA scan: 829700180 2008-Oct-23 19:42:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:42:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:42:00 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-23 19:42:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:42:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-23 19:42:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:42:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:42:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:42:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85321.00 2008-Oct-23 19:42:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:42:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:42:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:42:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:42:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:42:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:42:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:42:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:42:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:42:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:42:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:42:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:42:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:42:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:42:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:42:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:42:11 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-23 19:42:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:42:11 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-23 19:42:11 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-23 19:42:11 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-23 19:42:11 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-23 19:42:11 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:42:11 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:42:11 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:42:11 LOG2 antvel: Parameters to Doppler: Topocentric 85331 2008 297 0.0 2008-Oct-23 19:42:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:42:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-23 19:42:11 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-23 19:42:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:42:11 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:42:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-23 19:42:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:42:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:42:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:42:11 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-23 19:42:11 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.436350 2008.815389351535 18.999933 2008-Oct-23 19:42:11 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666692 10.098333333333336 2008-Oct-23 19:42:11 LOG4 log_alfabeam: ALFABEAM 1 21.366277312850752 10.204310367169096 2008-Oct-23 19:42:11 LOG4 log_alfabeam: ALFABEAM 2 21.361131144757589 10.142634701656473 2008-Oct-23 19:42:11 LOG4 log_alfabeam: ALFABEAM 3 21.361472513365989 10.036597587243046 2008-Oct-23 19:42:11 LOG4 log_alfabeam: ALFABEAM 4 21.367085554728458 9.992344871851458 2008-Oct-23 19:42:11 LOG4 log_alfabeam: ALFABEAM 5 21.372255801267343 10.054824562708308 2008-Oct-23 19:42:11 LOG4 log_alfabeam: ALFABEAM 6 21.371788947725751 10.160745192444972 2008-Oct-23 19:42:11 INFO2 take_data: Starting WAPP+GALFA scan: 829700181 2008-Oct-23 19:42:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:42:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:42:12 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-23 19:42:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:42:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-23 19:42:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:42:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:42:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:42:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85333.00 2008-Oct-23 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:42:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:42:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:42:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:42:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:42:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:42:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:42:23 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-23 19:42:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:42:23 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-23 19:42:23 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-23 19:42:23 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-23 19:42:23 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-23 19:42:23 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:42:23 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:42:23 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:42:23 LOG2 antvel: Parameters to Doppler: Topocentric 85343 2008 297 0.0 2008-Oct-23 19:42:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:42:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-23 19:42:23 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-23 19:42:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:42:23 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:42:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-23 19:42:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:42:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-23 19:42:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-23 19:42:23 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-23 19:42:23 LOG5 log_alfabeam: Parameters: 21.366666666666667 10.098333333333334 21.439692 2008.815389731792 18.999933 2008-Oct-23 19:42:23 LOG4 log_alfabeam: ALFABEAM 0 21.366666666666685 10.098333333333342 2008-Oct-23 19:42:23 LOG4 log_alfabeam: ALFABEAM 1 21.366318477386518 10.204341602856180 2008-Oct-23 19:42:23 LOG4 log_alfabeam: ALFABEAM 2 21.361148419178242 10.143102502480192 2008-Oct-23 19:42:23 LOG4 log_alfabeam: ALFABEAM 3 21.361448650255873 10.037038252203189 2008-Oct-23 19:42:23 LOG4 log_alfabeam: ALFABEAM 4 21.367044392371838 9.992311143261736 2008-Oct-23 19:42:23 LOG4 log_alfabeam: ALFABEAM 5 21.372238793155631 10.054351666075396 2008-Oct-23 19:42:23 LOG4 log_alfabeam: ALFABEAM 6 21.371813126133915 10.160310133304899 2008-Oct-23 19:42:23 INFO2 take_data: Starting WAPP+GALFA scan: 829700182 2008-Oct-23 19:42:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-23 19:42:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-23 19:42:24 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-23 19:42:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:42:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-23 19:42:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:42:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:42:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:42:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85345.00 2008-Oct-23 19:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:42:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:42:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:42:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:42:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:42:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:42:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:42:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:42:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-23 19:42:35 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-23 19:42:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-23 19:42:35 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-23 19:42:35 INFO2 smartfreq: Switching off CAL 2008-Oct-23 19:42:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-23 19:42:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-23 19:42:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 19:42:35 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-23 19:42:35 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 19:42:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-23 19:42:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 19:42:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 19:42:35 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-23 19:42:35 INFO3 restore_frequencies: Restoring original frequencies 2008-Oct-23 19:42:35 LOG5 antvel: Calling 'antvel 212200.000000 100554.000000 J 0' 2008-Oct-23 19:42:35 LOG2 antvel: Precessing RA = 21:22:00.0 Dec = +10:05:54.0 Epoch = 2008.81539 J 2008-Oct-23 19:42:35 LOG2 antvel: Computed apparent RA = 21:22:26.7 Dec = +10:08:19.5 2008-Oct-23 19:42:35 LOG2 antvel: Parameters to Doppler: Topocentric 85355 2008 297 0.0 2008-Oct-23 19:42:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:42:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-23 19:42:35 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-23 19:42:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:42:35 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:42:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-23 19:42:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:42:35 STOP finish_task: Finishing task 'smart frequency switching' 2008-Oct-23 19:42:35 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-23 19:42:35 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Oct-23 19:42:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:42:35 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Oct-23 19:42:35 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-23 19:42:36 NOTE run_command_file: DONE with command file processing 2008-Oct-23 19:42:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Oct-23 19:42:36 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Oct-23 19:42:36 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-23 19:42:36 DONE finish_task: DONE finished running: command file 'command_galfasrc' 2008-Oct-23 19:42:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:42:36 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'OK' 2008-Oct-23 19:42:36 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-23 19:42:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-23 19:42:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:42:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:42:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:42:47 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-23 19:42:47 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-23 19:42:47 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-23 19:42:47 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-23 19:42:47 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-23 19:42:47 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-23 19:42:47 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-23 19:42:48 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-23 19:42:48 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-23 19:42:48 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-23 19:42:48 LOG3 exec_msg: Closing socket 2008-Oct-23 19:42:48 LOG3 exec_msg: Closing socket 2008-Oct-23 19:42:48 LOG3 exec_msg: Closing socket 2008-Oct-23 19:42:48 LOG3 exec_msg: Closing socket 2008-Oct-23 19:42:50 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-23 19:42:50 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-23 19:42:50 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-23 19:42:50 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-23 19:43:02 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-23 19:43:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-23 19:43:04 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-23 19:43:04 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-23 19:43:04 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-23 19:43:04 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-23 19:43:04 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-23 19:43:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-23 19:43:04 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-23 19:43:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-23 19:43:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-23 19:43:04 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-23 19:43:04 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-23 19:43:04 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-23 19:43:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-23 19:43:04 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-23 19:43:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-23 19:43:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-23 19:43:04 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-23 19:43:04 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-23 19:43:04 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-23 19:43:04 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-23 19:43:04 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-23 19:43:04 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-23 19:43:04 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-23 19:43:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-23 19:43:04 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-23 19:43:04 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-23 19:43:04 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-23 19:43:04 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-23 19:43:04 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-23 19:43:04 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-23 19:43:04 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-23 19:43:04 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-23 19:43:04 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-23 19:43:04 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-23 19:43:04 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-23 19:43:04 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-23 19:43:04 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-23 19:43:04 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-23 19:43:04 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-23 19:43:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:43:05 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-23 19:43:05 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-23 19:43:05 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-23 19:43:05 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-23 19:43:05 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-23 19:43:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-23 19:43:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:43:05 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-23 19:43:05 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-23 19:43:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-23 19:43:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-23 19:43:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:43:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:43:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:05 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-23 19:43:05 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-23 19:43:05 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-23 19:43:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-23 19:43:05 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-23 19:43:05 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-23 19:43:05 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-23 19:43:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:43:05 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-23 19:43:05 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-23 19:43:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-23 19:43:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-23 19:43:06 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-23 19:43:06 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-23 19:43:06 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-23 19:43:06 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-23 19:43:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-23 19:43:06 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-23 19:43:06 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-23 19:43:06 START begin_task: Starting task 'selecting calibration port' 2008-Oct-23 19:43:06 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-23 19:43:06 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-23 19:43:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-23 19:43:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:43:06 START begin_task: Starting task 'waiting on calport' 2008-Oct-23 19:43:06 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-23 19:43:06 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-23 19:43:06 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-23 19:43:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:43:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-23 19:43:06 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-23 19:43:06 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-23 19:43:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-23 19:43:06 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-23 19:43:06 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-23 19:43:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-23 19:43:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-23 19:43:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 19:43:06 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-23 19:43:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 19:43:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-23 19:43:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 19:43:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 19:43:06 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-23 19:43:06 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-23 19:43:06 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-23 19:43:06 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-23 19:43:06 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-23 19:43:06 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-23 19:43:06 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-23 19:43:06 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-23 19:43:06 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-23 19:43:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-23 19:43:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-23 19:43:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-23 19:43:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-23 19:43:06 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-23 19:43:06 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-23 19:43:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 19:43:06 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-23 19:43:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-23 19:43:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-23 19:43:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 19:43:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-23 19:43:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-23 19:43:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 19:43:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 19:43:07 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-23 19:43:07 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-23 19:43:07 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-23 19:43:07 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-23 19:43:07 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-23 19:43:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:43:07 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-23 19:43:07 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-23 19:43:07 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-23 19:43:07 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-23 19:43:07 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-23 19:43:07 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-23 19:43:07 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-23 19:43:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-23 19:43:07 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-23 19:43:07 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-23 19:43:07 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-23 19:43:07 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-23 19:43:07 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-23 19:43:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:43:07 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-23 19:43:07 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-23 19:43:07 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-23 19:43:08 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-23 19:43:08 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-23 19:43:20 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-23 19:43:20 LOG4 exec_msg: From OBSERVER: track_new_source drift42p1 212800.0 +100554 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-23 19:43:20 LOG1 track_new_source: Calling 'track_new_source drift42p1 212800.0 +100554 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-23 19:43:20 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-23 19:43:20 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-23 19:43:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift42p1} INFO {Selecting source 'drift42p1' ...} 2008-Oct-23 19:43:20 LOG3 track_source: Calling 'track_source drift42p1 212800.0 +100554 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-23 19:43:20 START begin_task: Starting task 'sending tracking commands' 2008-Oct-23 19:43:20 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-23 19:43:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift42p1} INFO {Slewing to source 'drift42p1' ...} 2008-Oct-23 19:43:20 INFO1 track_source: Starting to track drift42p1 2008-Oct-23 19:43:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift42p1" 2008-Oct-23 19:43:20 LOG3 vw_send: To DATATAKING: set ra 212800.0 2008-Oct-23 19:43:20 LOG3 vw_send: To DATATAKING: set dec +100554 2008-Oct-23 19:43:20 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-23 19:43:20 LOG3 vw_send: To DATATAKING: pnt tr 212800.0 +100554 -CJ 2008-Oct-23 19:43:20 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-23 19:43:20 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-23 19:43:20 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-23 19:43:20 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-23 19:43:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:43:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-23 19:43:20 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-23 19:43:20 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-23 19:43:20 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-23 19:43:20 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-23 19:43:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-23 19:43:20 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-23 19:43:20 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-23 19:43:20 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-23 19:43:20 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-23 19:43:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:43:20 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-23 19:43:20 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-23 19:43:20 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-23 19:43:20 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-23 19:43:20 DONE finish_task: DONE finished selecting: new source 2008-Oct-23 19:43:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:43:20 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-23 19:43:20 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift42p1" 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: set ra 212800.0 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: set dec +100554 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: 212800.0 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: +100554 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: pnt tr 212800.0 +100554 -CJ 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-23 19:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-23 19:43:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-23 19:43:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-23 19:43:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-23 19:43:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-23 19:43:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-23 19:43:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-23 19:43:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-23 19:43:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-23 19:43:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-23 19:43:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-23 19:43:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-23 19:43:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-23 19:43:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-23 19:43:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-23 19:43:44 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-23 19:43:44 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-23 19:43:44 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-23 19:43:44 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-23 19:43:44 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-23 19:43:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-23 19:43:44 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-23 19:43:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-23 19:43:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-23 19:43:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-23 19:43:44 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-23 19:43:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-23 19:43:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-23 19:43:44 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-23 19:43:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-23 19:43:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-23 19:43:44 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-23 19:43:44 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-23 19:43:44 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-23 19:43:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-23 19:43:44 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-23 19:43:44 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-23 19:43:44 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-23 19:43:44 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-23 19:43:44 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-23 19:43:44 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-23 19:43:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-23 19:43:44 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-23 19:43:44 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-23 19:43:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-23 19:43:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:43:44 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-23 19:43:44 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-23 19:43:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-23 19:43:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:43:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:43:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:44 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-23 19:43:44 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-23 19:43:44 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-23 19:43:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-23 19:43:44 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-23 19:43:44 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-23 19:43:44 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-23 19:43:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:43:44 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-23 19:43:44 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-23 19:43:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-23 19:43:51 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-23 19:43:51 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-23 19:43:51 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-23 19:43:51 LOG5 begin_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-23 19:43:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-23 19:43:51 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-23 19:43:51 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-23 19:43:51 START begin_task: Starting task 'selecting calibration port' 2008-Oct-23 19:43:51 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-23 19:43:51 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-23 19:43:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-23 19:43:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:43:51 START begin_task: Starting task 'waiting on calport' 2008-Oct-23 19:43:51 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-23 19:43:51 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-23 19:43:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:43:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-23 19:43:51 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-23 19:43:51 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-23 19:43:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-23 19:43:51 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-23 19:43:51 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-23 19:43:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-23 19:43:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-23 19:43:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 19:43:51 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-23 19:43:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:43:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 19:43:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-23 19:43:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 19:43:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 19:43:52 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-23 19:43:52 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-23 19:43:52 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-23 19:43:52 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-23 19:43:52 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-23 19:43:52 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-23 19:43:52 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-23 19:43:52 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-23 19:43:52 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-23 19:43:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-23 19:43:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-23 19:43:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-23 19:43:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-23 19:43:52 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-23 19:43:52 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-23 19:43:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 19:43:52 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-23 19:43:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-23 19:43:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 19:43:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-23 19:43:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-23 19:43:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-23 19:43:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 19:43:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 19:43:52 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-23 19:43:52 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-23 19:43:52 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-23 19:43:52 LOG5 finish_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-23 19:43:52 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-23 19:43:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:43:52 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-23 19:43:52 LOG5 end_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-23 19:43:52 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-23 19:44:04 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-23 19:44:04 LOG4 exec_msg: From OBSERVER: track_new_source drift42p1 212800.0 +100554 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-23 19:44:04 LOG1 track_new_source: Calling 'track_new_source drift42p1 212800.0 +100554 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-23 19:44:04 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-23 19:44:04 LOG5 begin_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-23 19:44:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift42p1} INFO {Selecting source 'drift42p1' ...} 2008-Oct-23 19:44:04 LOG3 track_source: Calling 'track_source drift42p1 212800.0 +100554 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-23 19:44:04 START begin_task: Starting task 'sending tracking commands' 2008-Oct-23 19:44:04 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-23 19:44:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift42p1} INFO {Slewing to source 'drift42p1' ...} 2008-Oct-23 19:44:04 INFO1 track_source: Starting to track drift42p1 2008-Oct-23 19:44:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift42p1" 2008-Oct-23 19:44:04 LOG3 vw_send: To DATATAKING: set ra 212800.0 2008-Oct-23 19:44:04 LOG3 vw_send: To DATATAKING: set dec +100554 2008-Oct-23 19:44:04 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-23 19:44:04 LOG3 vw_send: To DATATAKING: pnt tr 212800.0 +100554 -CJ 2008-Oct-23 19:44:04 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-23 19:44:04 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-23 19:44:04 LOG5 finish_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-23 19:44:04 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-23 19:44:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:44:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-23 19:44:04 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-23 19:44:04 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-23 19:44:04 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-23 19:44:04 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-23 19:44:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-23 19:44:04 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-23 19:44:04 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-23 19:44:04 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-23 19:44:04 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-23 19:44:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:44:04 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-23 19:44:04 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-23 19:44:04 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-23 19:44:04 LOG5 finish_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-23 19:44:04 DONE finish_task: DONE finished selecting: new source 2008-Oct-23 19:44:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:44:05 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-23 19:44:05 LOG5 end_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-23 19:44:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift42p1" 2008-Oct-23 19:44:05 LOG4 got_cormsg: From DATATAKING: set ra 212800.0 2008-Oct-23 19:44:05 LOG4 got_cormsg: From DATATAKING: set dec +100554 2008-Oct-23 19:44:05 LOG4 got_cormsg: From DATATAKING: vw% 212800.0 2008-Oct-23 19:44:05 LOG4 got_cormsg: From DATATAKING: vw% +100554 2008-Oct-23 19:44:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-23 19:44:05 LOG4 got_cormsg: From DATATAKING: pnt tr 212800.0 +100554 -CJ 2008-Oct-23 19:44:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-23 19:44:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-23 19:44:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:05 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-23 19:44:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:12 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-23 19:44:12 LOG4 exec_msg: From OBSERVER: track_new_source drift42p1 212800.0 +100554 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-23 19:44:12 LOG1 track_new_source: Calling 'track_new_source drift42p1 212800.0 +100554 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-23 19:44:12 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-23 19:44:12 LOG5 begin_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-23 19:44:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift42p1} INFO {Selecting source 'drift42p1' ...} 2008-Oct-23 19:44:12 LOG3 track_source: Calling 'track_source drift42p1 212800.0 +100554 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-23 19:44:12 START begin_task: Starting task 'sending tracking commands' 2008-Oct-23 19:44:12 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-23 19:44:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift42p1} INFO {Slewing to source 'drift42p1' ...} 2008-Oct-23 19:44:12 INFO1 track_source: Starting to track drift42p1 2008-Oct-23 19:44:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift42p1" 2008-Oct-23 19:44:12 LOG3 vw_send: To DATATAKING: set ra 212800.0 2008-Oct-23 19:44:12 LOG3 vw_send: To DATATAKING: set dec +100554 2008-Oct-23 19:44:12 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-23 19:44:12 LOG3 vw_send: To DATATAKING: pnt tr 212800.0 +100554 -CJ 2008-Oct-23 19:44:12 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-23 19:44:12 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-23 19:44:12 LOG5 finish_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-23 19:44:12 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-23 19:44:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:44:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-23 19:44:12 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-23 19:44:12 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-23 19:44:12 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-23 19:44:12 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-23 19:44:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-23 19:44:13 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-23 19:44:13 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-23 19:44:13 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-23 19:44:13 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-23 19:44:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:44:13 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-23 19:44:13 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-23 19:44:13 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-23 19:44:13 LOG5 finish_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-23 19:44:13 DONE finish_task: DONE finished selecting: new source 2008-Oct-23 19:44:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:44:13 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-23 19:44:13 LOG5 end_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-23 19:44:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift42p1" 2008-Oct-23 19:44:13 LOG4 got_cormsg: From DATATAKING: set ra 212800.0 2008-Oct-23 19:44:13 LOG4 got_cormsg: From DATATAKING: set dec +100554 2008-Oct-23 19:44:13 LOG4 got_cormsg: From DATATAKING: vw% 212800.0 2008-Oct-23 19:44:13 LOG4 got_cormsg: From DATATAKING: vw% +100554 2008-Oct-23 19:44:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-23 19:44:13 LOG4 got_cormsg: From DATATAKING: pnt tr 212800.0 +100554 -CJ 2008-Oct-23 19:44:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-23 19:44:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-23 19:44:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:13 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-23 19:44:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:18 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-23 19:44:18 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-23 19:44:18 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-23 19:44:18 LOG5 begin_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-23 19:44:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-23 19:44:18 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-23 19:44:18 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-23 19:44:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-23 19:44:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:44:18 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-23 19:44:18 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-23 19:44:18 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-23 19:44:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:44:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-23 19:44:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-23 19:44:21 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-23 19:44:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-23 19:44:21 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-23 19:44:21 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-23 19:44:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-23 19:44:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-23 19:44:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-23 19:44:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-23 19:44:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-23 19:44:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-23 19:44:21 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-23 19:44:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-23 19:44:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:22 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-23 19:44:22 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2008-Oct-23 19:44:22 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2008-Oct-23 19:44:22 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 3 dB 2008-Oct-23 19:44:22 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-23 19:44:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-23 19:44:22 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-23 19:44:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.053 1.027 ALFA beam 1: 0.986 0.888 2008-Oct-23 19:44:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.927 0.908 ALFA beam 3: 0.944 1.053 2008-Oct-23 19:44:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.930 1.028 ALFA beam 5: 0.975 1.047 2008-Oct-23 19:44:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.029 0.994 ALFA beam 7: 0.911 0.876 2008-Oct-23 19:44:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-23 19:44:22 LOG5 finish_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-23 19:44:22 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Oct-23 19:44:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:44:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-23 19:44:22 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-23 19:44:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-23 19:44:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-23 19:44:22 LOG5 finish_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-23 19:44:22 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-23 19:44:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-23 19:44:22 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-23 19:44:22 LOG5 end_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-23 19:44:23 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2008-Oct-23 19:44:23 LOG4 exec_msg: From OBSERVER: new_file manual 2008-Oct-23 19:44:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-23 19:44:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-23 19:44:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-23 19:44:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-23 19:44:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-23 19:44:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20081023.a2010.0011.fits 2008-Oct-23 19:44:24 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081023.a2010.0011.fits} 2008-Oct-23 19:44:26 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Oct-23 19:44:26 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift42p1 212800.0 +100554 J 0 Topocentric velocity(optical) 2008-Oct-23 19:44:26 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift42p1 212800.0 +100554 J 0 Topocentric velocity(optical)' 2008-Oct-23 19:44:26 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Oct-23 19:44:26 LOG5 begin_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-23 19:44:26 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift42p1' 2008-Oct-23 19:44:26 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Oct-23 19:44:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift42p1} 2008-Oct-23 19:44:26 INFO5 fixed_driftmap: Start: year = 2008.8153935977386 RA = 21:28:26.8 Dec = +10:08:22.6 2008-Oct-23 19:44:26 NOTE fixed_driftmap: Setting ZA to 8:12:51.1 ... 2008-Oct-23 19:44:26 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 8.21 2008-Oct-23 19:44:26 LOG3 track_source: Calling 'track_source drift42p1 360.0 8.2141961350 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Oct-23 19:44:26 START begin_task: Starting task 'sending tracking commands' 2008-Oct-23 19:44:26 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-23 19:44:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift42p1} INFO {Slewing to source 'drift42p1' ...} 2008-Oct-23 19:44:26 INFO1 track_source: Starting to track drift42p1 2008-Oct-23 19:44:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift42p1" 2008-Oct-23 19:44:26 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Oct-23 19:44:26 LOG3 vw_send: To DATATAKING: set dec 8.2141961350 2008-Oct-23 19:44:26 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-23 19:44:26 LOG3 vw_send: To DATATAKING: pnt tr 360.0 8.2141961350 -CF 2008-Oct-23 19:44:26 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-23 19:44:26 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-23 19:44:26 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-23 19:44:26 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-23 19:44:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:44:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-23 19:44:26 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-23 19:44:26 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-23 19:44:26 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-23 19:44:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-23 19:44:26 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-23 19:44:26 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Oct-23 19:44:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-23 19:44:26 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-23 19:44:26 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-23 19:44:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift42p1" 2008-Oct-23 19:44:26 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Oct-23 19:44:26 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Oct-23 19:44:26 LOG4 got_cormsg: From DATATAKING: 2008-Oct-23 19:44:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:26 LOG4 got_cormsg: From DATATAKING: set dec 8.2141961350 2008-Oct-23 19:44:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-23 19:44:26 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 8.2141961350 -CF 2008-Oct-23 19:44:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-23 19:44:26 LOG4 got_cormsg: From DATATAKING: 8.2141961350 2008-Oct-23 19:44:26 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Oct-23 19:44:27 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-23 19:44:27 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-23 19:44:27 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-23 19:44:27 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-23 19:44:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-23 19:44:27 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-23 19:44:27 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-23 19:44:27 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-23 19:44:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:44:27 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-23 19:44:27 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-23 19:44:27 START begin_task: Starting task 'waiting on telescope' 2008-Oct-23 19:44:27 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-23 19:44:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-23 19:44:27 LOG3 waittrk: Start waittrk 5 2008-Oct-23 19:44:27 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-23 19:44:27 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-23 19:44:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-23 19:44:32 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-23 19:44:32 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-23 19:44:32 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-23 19:44:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-23 19:44:36 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-23 19:44:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-23 19:44:37 INFO2 waittrk: Now tracking drift42p1 2008-Oct-23 19:44:37 LOG4 waittrk: Current telescope position: Az = 359.62 ZA = 8.18 2008-Oct-23 19:44:37 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-23 19:44:37 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-23 19:44:37 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Oct-23 19:44:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:44:37 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-23 19:44:37 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-23 19:44:37 START begin_task: Starting task 'selecting calibration type' 2008-Oct-23 19:44:37 LOG5 begin_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-23 19:44:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-23 19:44:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-23 19:44:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:44:37 START begin_task: Starting task 'waiting on setcal' 2008-Oct-23 19:44:37 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-23 19:44:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-23 19:44:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:44:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-23 19:44:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-23 19:44:37 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-23 19:44:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-23 19:44:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-23 19:44:37 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-23 19:44:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-23 19:44:37 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-23 19:44:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-23 19:44:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-23 19:44:37 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-23 19:44:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-23 19:44:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-23 19:44:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-23 19:44:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-23 19:44:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-23 19:44:37 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-23 19:44:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-23 19:44:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-23 19:44:37 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-23 19:44:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-23 19:44:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-23 19:44:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-23 19:44:37 LOG5 end_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-23 19:44:37 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Oct-23 19:44:37 INFO3 dopset_later: Setting Doppler correction now 2008-Oct-23 19:44:37 LOG5 antvel: Calling 'antvel 360.000000 8.214196 F 0' 2008-Oct-23 19:44:37 LOG2 antvel: Transforming current Az = 360.00 ZA = 8.21 to apparent RA = 21:28:37.3 Dec = +10:08:22.6 2008-Oct-23 19:44:37 LOG2 antvel: Parameters to Doppler: Topocentric 85477 2008 297 0.0 2008-Oct-23 19:44:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-23 19:44:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-23 19:44:37 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-23 19:44:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-23 19:44:37 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-23 19:44:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-23 19:44:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:44:37 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-23 19:44:37 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-23 19:44:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-23 19:44:37 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-23 19:44:37 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-23 19:44:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-23 19:44:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:44:37 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-23 19:44:37 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-23 19:44:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-23 19:44:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-23 19:44:37 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-23 19:44:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:44:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-23 19:44:40 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-23 19:44:40 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-23 19:44:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-23 19:44:40 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-23 19:44:40 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-23 19:44:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-23 19:44:40 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-23 19:44:40 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-23 19:44:40 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-23 19:44:40 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-23 19:44:40 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-23 19:44:40 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-23 19:44:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:44:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-23 19:44:41 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 5 dB 2008-Oct-23 19:44:41 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 3 dB 2008-Oct-23 19:44:41 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2008-Oct-23 19:44:41 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2008-Oct-23 19:44:41 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-23 19:44:41 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-23 19:44:41 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-23 19:44:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.052 1.025 ALFA beam 1: 0.986 1.123 2008-Oct-23 19:44:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.927 0.907 ALFA beam 3: 0.957 1.072 2008-Oct-23 19:44:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.949 1.046 ALFA beam 5: 0.974 1.047 2008-Oct-23 19:44:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.048 1.014 ALFA beam 7: 0.922 0.895 2008-Oct-23 19:44:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-23 19:44:41 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-23 19:44:41 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-23 19:44:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:44:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-23 19:44:41 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-23 19:44:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-23 19:44:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-23 19:44:41 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-23 19:44:41 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-23 19:44:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:44:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-23 19:44:41 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-23 19:44:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-23 19:44:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-23 19:44:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-23 19:44:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-23 19:44:41 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081023.a2010.0011.fits' is empty! 2008-Oct-23 19:44:41 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:28:26.8 LST = 21:28:41.3 diff = -14.5 secs 2008-Oct-23 19:44:41 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Oct-23 19:44:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Oct-23 19:44:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-23 19:44:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-23 19:44:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-23 19:44:41 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-23 19:44:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-23 19:44:41 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-23 19:44:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-23 19:44:41 INFO2 take_data: Starting WAPP scan: 829700183 2008-Oct-23 19:44:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-23 19:44:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-23 19:44:42 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-23 19:44:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-23 19:44:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:44:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85483.00 2008-Oct-23 19:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:44:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:44:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:44:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:44:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:44:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:44:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:44:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:44:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:44:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:44:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:44:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:44:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:44:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:44:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:44:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:45:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:45:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:45:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:45:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-23 19:45:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:45:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:45:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-23 19:45:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:45:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:45:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:45:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:45:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:45:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:45:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:46:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:46:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:46:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:46:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:46:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:46:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:46:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:47:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:47:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:47:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:47:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:47:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:47:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:47:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:47:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:47:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:47:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:47:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:47:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:47:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:47:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:47:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:48:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:48:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:48:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:48:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-23 19:49:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:49:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:49:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:49:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:50:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:50:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:50:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:50:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:50:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:50:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:50:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:50:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:50:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:50:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:50:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:50:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:51:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:51:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:51:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:52:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:52:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:52:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:52:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:52:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:52:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:52:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:52:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:52:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:52:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:52:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:52:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:52:53 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 54762.995035 to 54762.995046! 2008-Oct-23 19:52:54 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (54762.995035 - 54762.995058)! 2008-Oct-23 19:52:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:52:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:53:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:53:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:53:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:53:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:53:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:53:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:53:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:53:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:53:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:53:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:53:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:53:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:53:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:53:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:53:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:54:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:54:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:54:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:54:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:54:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:54:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:54:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:54:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:54:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:54:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-23 19:54:43 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-23 19:54:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-23 19:54:43 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-23 19:54:43 LOG1 fixed_driftmap: New position: year = 2008.815413180977 RA = 21:38:18.7 RA/Dec = 21:38:45.6 +10:08:27.7 2008-Oct-23 19:54:43 NOTE fixed_driftmap: Correcting ZA to 8:12:46.0 ... 2008-Oct-23 19:54:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 8.2127904842 -CF 2008-Oct-23 19:54:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-23 19:54:43 START begin_task: Starting task 'WAPP calibration' 2008-Oct-23 19:54:43 LOG5 begin_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-23 19:54:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-23 19:54:43 START begin_task: Starting task 'selecting calibration type' 2008-Oct-23 19:54:43 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-23 19:54:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-23 19:54:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-23 19:54:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:54:43 START begin_task: Starting task 'waiting on setcal' 2008-Oct-23 19:54:43 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-23 19:54:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:54:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 8.2127904842 -CF 2008-Oct-23 19:54:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:54:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-23 19:54:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 19:54:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:54:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-23 19:54:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-23 19:54:44 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-23 19:54:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-23 19:54:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-23 19:54:44 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-23 19:54:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-23 19:54:44 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-23 19:54:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 19:54:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-23 19:54:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-23 19:54:44 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-23 19:54:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-23 19:54:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-23 19:54:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-23 19:54:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-23 19:54:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-23 19:54:44 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-23 19:54:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-23 19:54:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-23 19:54:44 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-23 19:54:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-23 19:54:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-23 19:54:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-23 19:54:44 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-23 19:54:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-23 19:54:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-23 19:54:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-23 19:54:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 19:54:44 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-23 19:54:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 19:54:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-23 19:54:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 19:54:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 19:54:44 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-23 19:54:44 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-23 19:54:44 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-23 19:54:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-23 19:54:44 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-23 19:54:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-23 19:54:44 INFO2 take_data: Starting WAPP scan: 829700184 2008-Oct-23 19:54:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-23 19:54:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-23 19:54:45 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-23 19:54:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:54:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86086.00 2008-Oct-23 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:54:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 19:54:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-23 19:54:47 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-23 19:54:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-23 19:54:47 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-23 19:54:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-23 19:54:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-23 19:54:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-23 19:54:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 19:54:47 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-23 19:54:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 19:54:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-23 19:54:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 19:54:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 19:54:47 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-23 19:54:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-23 19:54:47 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-23 19:54:47 LOG5 finish_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-23 19:54:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-23 19:54:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 19:54:48 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-23 19:54:48 LOG5 end_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-23 19:54:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Oct-23 19:54:48 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-23 19:54:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-23 19:54:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-23 19:54:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-23 19:54:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-23 19:54:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-23 19:54:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-23 19:54:48 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-23 19:54:48 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-23 19:54:48 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-23 19:54:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-23 19:54:48 INFO2 take_data: Starting WAPP scan: 829700185 2008-Oct-23 19:54:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-23 19:54:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-23 19:54:48 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-23 19:54:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-23 19:54:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 19:54:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20081023.a2010.0012.fits 2008-Oct-23 19:54:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86089.00 2008-Oct-23 19:54:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081023.a2010.0012.fits} 2008-Oct-23 19:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 19:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 19:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 19:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 19:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 19:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 19:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 19:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 19:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 19:54:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:54:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:54:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:54:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:54:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:55:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:55:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:55:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:55:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:55:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:55:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:55:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:55:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:55:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:55:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:55:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:55:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:55:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:55:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:56:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:56:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:56:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:57:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:57:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:57:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:58:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:58:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:58:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:58:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:58:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:58:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:58:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:58:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:58:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:58:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:58:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:58:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:59:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:59:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:59:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:59:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:59:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:59:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:59:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:59:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:59:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:59:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:59:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:59:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 19:59:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 19:59:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 19:59:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:00:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:00:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:00:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:01:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:01:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:01:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:02:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:02:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:02:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:02:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:02:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:02:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:02:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:02:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:02:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:02:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:02:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:02:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:02:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:02:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:02:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:02:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:02:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:02:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:02:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:02:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:02:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:02:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:02:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:02:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:03:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:03:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:03:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:03:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:03:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:03:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:03:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:03:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:03:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:03:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:03:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:03:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:03:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:03:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:03:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 20:04:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-23 20:04:49 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-23 20:04:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-23 20:04:49 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-23 20:04:49 LOG1 fixed_driftmap: New position: year = 2008.8154323839583 RA = 21:48:26.2 RA/Dec = 21:48:53.2 +10:08:32.3 2008-Oct-23 20:04:49 NOTE fixed_driftmap: Correcting ZA to 8:12:41.4 ... 2008-Oct-23 20:04:49 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 8.2114904762 -CF 2008-Oct-23 20:04:49 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-23 20:04:49 START begin_task: Starting task 'WAPP calibration' 2008-Oct-23 20:04:49 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-23 20:04:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-23 20:04:49 START begin_task: Starting task 'selecting calibration type' 2008-Oct-23 20:04:49 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-23 20:04:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-23 20:04:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-23 20:04:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 20:04:49 START begin_task: Starting task 'waiting on setcal' 2008-Oct-23 20:04:49 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-23 20:04:49 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 8.2114904762 -CF 2008-Oct-23 20:04:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 20:04:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-23 20:04:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-23 20:04:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 20:04:49 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-23 20:04:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-23 20:04:49 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-23 20:04:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-23 20:04:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-23 20:04:50 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-23 20:04:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-23 20:04:50 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-23 20:04:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-23 20:04:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-23 20:04:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-23 20:04:50 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-23 20:04:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-23 20:04:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-23 20:04:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-23 20:04:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-23 20:04:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-23 20:04:50 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-23 20:04:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-23 20:04:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-23 20:04:50 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-23 20:04:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-23 20:04:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-23 20:04:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-23 20:04:50 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-23 20:04:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-23 20:04:50 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-23 20:04:50 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-23 20:04:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 20:04:50 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-23 20:04:50 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 20:04:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-23 20:04:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 20:04:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 20:04:50 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-23 20:04:50 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-23 20:04:50 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-23 20:04:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-23 20:04:50 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-23 20:04:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-23 20:04:50 INFO2 take_data: Starting WAPP scan: 829700186 2008-Oct-23 20:04:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-23 20:04:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-23 20:04:50 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-23 20:04:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 20:04:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 291.00 2008-Oct-23 20:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 20:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 20:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 20:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 20:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 20:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 20:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 20:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 20:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 20:04:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-23 20:04:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-23 20:04:52 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-23 20:04:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-23 20:04:52 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-23 20:04:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-23 20:04:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-23 20:04:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-23 20:04:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-23 20:04:52 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-23 20:04:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-23 20:04:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-23 20:04:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-23 20:04:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-23 20:04:52 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-23 20:04:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-23 20:04:52 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-23 20:04:52 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-23 20:04:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-23 20:04:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-23 20:04:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-23 20:04:53 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-23 20:04:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Oct-23 20:04:53 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Oct-23 20:04:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-23 20:04:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-23 20:04:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-23 20:04:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-23 20:04:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-23 20:04:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-23 20:04:53 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-23 20:04:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-23 20:04:53 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-23 20:04:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-23 20:04:53 INFO2 take_data: Starting WAPP scan: 829700187 2008-Oct-23 20:04:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-23 20:04:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-23 20:04:53 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-23 20:04:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-23 20:04:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-23 20:04:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20081023.a2010.0013.fits 2008-Oct-23 20:04:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 294.00 2008-Oct-23 20:04:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081023.a2010.0013.fits} 2008-Oct-23 20:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-23 20:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1569.150600 MHz 2008-Oct-23 20:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1726.671040 MHz 2008-Oct-23 20:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1805.649862 MHz 2008-Oct-23 20:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.711543 MHz 2008-Oct-23 20:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1636.285168 MHz 2008-Oct-23 20:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1741.572402 MHz 2008-Oct-23 20:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1892.282402 MHz 2008-Oct-23 20:04:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1981.256613 MHz 2008-Oct-23 20:04:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:04:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:04:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:04:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:05:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:05:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:05:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:06:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:06:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:06:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:07:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:07:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:07:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:07:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:07:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:07:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:07:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-23 20:07:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:07:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:07:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-23 20:07:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-23 20:07:12 WARNING WAPP=4-chip_count: WARNING counts don't match between ch