2008-Oct-22 19:43:51 BEGIN executive: CIMA executive starting ... 2008-Oct-22 19:43:51 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-22 19:43:51 INFO1 executive: Using CIMA version 3.0.05 'next' from 2008-10-21 17:39 2008-Oct-22 19:43:51 INFO4 executive: This is an ON-LINE session 2008-Oct-22 19:43:51 INFO4 executive: This is a LOCAL session 2008-Oct-22 19:43:51 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-22 19:43:51 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'CA and KS' 2008-Oct-22 19:43:51 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081022' 2008-Oct-22 19:43:52 LOG2 log_preferences: Currently applied preferences: 2008-Oct-22 19:43:52 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-22 19:43:52 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-22 19:43:52 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-22 19:43:52 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-22 19:43:52 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-22 19:43:52 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-22 19:43:52 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-22 19:43:52 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-22 19:43:52 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-22 19:43:52 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-22 19:43:52 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-22 19:43:52 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-22 19:43:52 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-22 19:43:52 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-22 19:43:52 ALERT executive: CIMA executive ready 2008-Oct-22 19:43:53 NOTE frontend: CIMA frontend ready 2008-Oct-22 19:43:56 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2008-Oct-22 19:43:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:43:56 LOG4 got_cormsg: From DATATAKING: setup 2008-Oct-22 19:43:58 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-22 19:43:58 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-22 19:43:58 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-22 19:43:58 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-22 19:43:58 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-22 19:43:58 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-22 19:43:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-22 19:43:58 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-22 19:43:58 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-22 19:43:58 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-22 19:43:58 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-22 19:43:58 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-22 19:43:58 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-22 19:43:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-22 19:43:58 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-22 19:43:58 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-22 19:44:03 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-22 19:44:03 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-22 19:44:03 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-22 19:44:03 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-22 19:44:03 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-22 19:44:03 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-22 19:44:03 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-22 19:44:03 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-22 19:44:03 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-22 19:44:03 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Oct-22 19:44:04 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-22 19:44:04 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:07 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-22 19:44:07 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-22 19:44:07 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-22 19:44:07 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-22 19:44:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:14 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-22 19:44:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-22 19:44:16 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-22 19:44:16 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-22 19:44:16 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-22 19:44:16 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-22 19:44:16 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-22 19:44:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-22 19:44:16 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-22 19:44:16 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-22 19:44:16 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-22 19:44:16 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-22 19:44:16 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-22 19:44:16 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-22 19:44:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-22 19:44:16 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-22 19:44:16 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-22 19:44:16 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-22 19:44:16 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-22 19:44:16 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-22 19:44:16 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-22 19:44:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-22 19:44:16 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-22 19:44:16 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-22 19:44:16 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-22 19:44:16 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-22 19:44:16 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-22 19:44:16 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-22 19:44:16 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-22 19:44:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-22 19:44:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-22 19:44:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-22 19:44:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-22 19:44:16 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-22 19:44:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-22 19:44:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-22 19:44:16 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-22 19:44:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-22 19:44:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-22 19:44:16 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-22 19:44:16 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-22 19:44:16 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-22 19:44:16 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-22 19:44:16 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-22 19:44:16 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-22 19:44:16 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-22 19:44:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-22 19:44:16 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-22 19:44:16 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-22 19:44:16 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-22 19:44:16 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-22 19:44:16 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-22 19:44:16 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-22 19:44:16 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-22 19:44:16 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-22 19:44:16 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-22 19:44:16 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-22 19:44:17 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-22 19:44:17 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-22 19:44:17 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-22 19:44:17 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-22 19:44:17 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-22 19:44:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-22 19:44:17 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-22 19:44:17 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-22 19:44:17 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-22 19:44:17 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-22 19:44:17 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-22 19:44:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-22 19:44:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:44:17 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-22 19:44:17 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-22 19:44:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:44:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-22 19:44:33 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-22 19:44:33 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-22 19:44:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-22 19:44:33 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-22 19:44:33 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-22 19:44:33 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-22 19:44:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-22 19:44:33 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-22 19:44:33 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-22 19:44:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-22 19:44:33 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-22 19:44:33 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-22 19:44:33 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-22 19:44:33 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-22 19:44:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-22 19:44:33 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-22 19:44:33 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-22 19:44:33 START begin_task: Starting task 'selecting calibration port' 2008-Oct-22 19:44:33 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-22 19:44:33 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-22 19:44:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-22 19:44:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:44:33 START begin_task: Starting task 'waiting on calport' 2008-Oct-22 19:44:33 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-22 19:44:33 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-22 19:44:33 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-22 19:44:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:44:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:34 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-22 19:44:34 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-22 19:44:34 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-22 19:44:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-22 19:44:34 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-22 19:44:34 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-22 19:44:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-22 19:44:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-22 19:44:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-22 19:44:34 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-22 19:44:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-22 19:44:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-22 19:44:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-22 19:44:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-22 19:44:34 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-22 19:44:34 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-22 19:44:34 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-22 19:44:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-22 19:44:34 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-22 19:44:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-22 19:44:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-22 19:44:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-22 19:44:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-22 19:44:34 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-22 19:44:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-22 19:44:34 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-22 19:44:34 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-22 19:44:34 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-22 19:44:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-22 19:44:34 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-22 19:44:34 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-22 19:44:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-22 19:44:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-22 19:44:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-22 19:44:34 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-22 19:44:34 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-22 19:44:34 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-22 19:44:34 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-22 19:44:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-22 19:44:34 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-22 19:44:35 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-22 19:44:35 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-22 19:44:35 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-22 19:44:35 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-22 19:44:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-22 19:44:35 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-22 19:44:35 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-22 19:44:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-22 19:44:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20081022.a2010.0011.fits 2008-Oct-22 19:44:35 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081022.a2010.0011.fits} 2008-Oct-22 19:44:35 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-22 19:44:48 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-22 19:44:48 LOG4 exec_msg: From OBSERVER: track_new_source drift43p1 212600.0 +102030 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-22 19:44:48 LOG1 track_new_source: Calling 'track_new_source drift43p1 212600.0 +102030 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-22 19:44:48 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-22 19:44:48 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-22 19:44:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift43p1} INFO {Selecting source 'drift43p1' ...} 2008-Oct-22 19:44:48 LOG3 track_source: Calling 'track_source drift43p1 212600.0 +102030 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-22 19:44:48 START begin_task: Starting task 'sending tracking commands' 2008-Oct-22 19:44:48 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-22 19:44:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift43p1} INFO {Slewing to source 'drift43p1' ...} 2008-Oct-22 19:44:48 INFO1 track_source: Starting to track drift43p1 2008-Oct-22 19:44:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift43p1" 2008-Oct-22 19:44:48 LOG3 vw_send: To DATATAKING: set ra 212600.0 2008-Oct-22 19:44:48 LOG3 vw_send: To DATATAKING: set dec +102030 2008-Oct-22 19:44:48 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-22 19:44:48 LOG3 vw_send: To DATATAKING: pnt tr 212600.0 +102030 -CJ 2008-Oct-22 19:44:49 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-22 19:44:49 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-22 19:44:49 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-22 19:44:49 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-22 19:44:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-22 19:44:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-22 19:44:49 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-22 19:44:49 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-22 19:44:49 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-22 19:44:49 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-22 19:44:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-22 19:44:49 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-22 19:44:49 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-22 19:44:49 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-22 19:44:49 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-22 19:44:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-22 19:44:49 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-22 19:44:49 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-22 19:44:49 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-22 19:44:49 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-22 19:44:49 DONE finish_task: DONE finished selecting: new source 2008-Oct-22 19:44:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-22 19:44:49 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-22 19:44:49 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-22 19:44:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift43p1" 2008-Oct-22 19:44:49 LOG4 got_cormsg: From DATATAKING: set ra 212600.0 2008-Oct-22 19:44:49 LOG4 got_cormsg: From DATATAKING: set dec +102030 2008-Oct-22 19:44:49 LOG4 got_cormsg: From DATATAKING: vw% 212600.0 2008-Oct-22 19:44:49 LOG4 got_cormsg: From DATATAKING: vw% +102030 2008-Oct-22 19:44:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-22 19:44:49 LOG4 got_cormsg: From DATATAKING: pnt tr 212600.0 +102030 -CJ 2008-Oct-22 19:44:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-22 19:44:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-22 19:44:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:49 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-22 19:44:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:44:52 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-22 19:44:52 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-22 19:45:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-22 19:45:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-22 19:45:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-22 19:45:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-22 19:45:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-22 19:45:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-22 19:45:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-22 19:45:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-22 19:45:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-22 19:45:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-22 19:45:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-22 19:45:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-22 19:45:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-22 19:45:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-22 19:45:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-22 19:45:25 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-22 19:45:25 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-22 19:45:25 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-22 19:45:25 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-22 19:45:25 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-22 19:45:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-22 19:45:25 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-22 19:45:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-22 19:45:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-22 19:45:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-22 19:45:25 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-22 19:45:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-22 19:45:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-22 19:45:26 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-22 19:45:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-22 19:45:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-22 19:45:26 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-22 19:45:26 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-22 19:45:26 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-22 19:45:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-22 19:45:26 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-22 19:45:26 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-22 19:45:26 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-22 19:45:26 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-22 19:45:26 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-22 19:45:26 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-22 19:45:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-22 19:45:26 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-22 19:45:26 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-22 19:45:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-22 19:45:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:45:26 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-22 19:45:26 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-22 19:45:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-22 19:45:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-22 19:45:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:45:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:45:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:45:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-22 19:45:26 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-22 19:45:26 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-22 19:45:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-22 19:45:26 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-22 19:45:26 LOG5 finish_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-22 19:45:26 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-22 19:45:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-22 19:45:26 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-22 19:45:26 LOG5 end_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-22 19:45:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-22 19:45:35 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-22 19:45:35 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-22 19:45:35 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-22 19:45:35 LOG5 begin_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-22 19:45:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-22 19:45:35 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-22 19:45:35 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-22 19:45:35 START begin_task: Starting task 'selecting calibration port' 2008-Oct-22 19:45:35 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-22 19:45:35 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-22 19:45:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-22 19:45:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:45:35 START begin_task: Starting task 'waiting on calport' 2008-Oct-22 19:45:35 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-22 19:45:36 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-22 19:45:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:45:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:45:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-22 19:45:36 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-22 19:45:36 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-22 19:45:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-22 19:45:36 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-22 19:45:36 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-22 19:45:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-22 19:45:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-22 19:45:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-22 19:45:36 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-22 19:45:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:45:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-22 19:45:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-22 19:45:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-22 19:45:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-22 19:45:36 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-22 19:45:36 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-22 19:45:36 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-22 19:45:36 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-22 19:45:36 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-22 19:45:36 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-22 19:45:36 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-22 19:45:36 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-22 19:45:36 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-22 19:45:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-22 19:45:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-22 19:45:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-22 19:45:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-22 19:45:36 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-22 19:45:36 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-22 19:45:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-22 19:45:36 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-22 19:45:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-22 19:45:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-22 19:45:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-22 19:45:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-22 19:45:36 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-22 19:45:36 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-22 19:45:36 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-22 19:45:36 LOG5 finish_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-22 19:45:36 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-22 19:45:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-22 19:45:36 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-22 19:45:36 LOG5 end_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-22 19:45:36 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-22 19:45:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-22 19:45:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-22 19:45:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-22 19:46:07 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-22 19:46:07 LOG4 exec_msg: From OBSERVER: track_new_source drift43p1 212600.0 +102030 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-22 19:46:07 LOG1 track_new_source: Calling 'track_new_source drift43p1 212600.0 +102030 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-22 19:46:07 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-22 19:46:07 LOG5 begin_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-22 19:46:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift43p1} INFO {Selecting source 'drift43p1' ...} 2008-Oct-22 19:46:07 LOG3 track_source: Calling 'track_source drift43p1 212600.0 +102030 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-22 19:46:07 START begin_task: Starting task 'sending tracking commands' 2008-Oct-22 19:46:07 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-22 19:46:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift43p1} INFO {Slewing to source 'drift43p1' ...} 2008-Oct-22 19:46:08 INFO1 track_source: Starting to track drift43p1 2008-Oct-22 19:46:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift43p1" 2008-Oct-22 19:46:08 LOG3 vw_send: To DATATAKING: set ra 212600.0 2008-Oct-22 19:46:08 LOG3 vw_send: To DATATAKING: set dec +102030 2008-Oct-22 19:46:08 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-22 19:46:08 LOG3 vw_send: To DATATAKING: pnt tr 212600.0 +102030 -CJ 2008-Oct-22 19:46:08 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-22 19:46:08 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-22 19:46:08 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-22 19:46:08 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-22 19:46:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-22 19:46:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-22 19:46:08 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-22 19:46:08 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-22 19:46:08 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-22 19:46:08 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-22 19:46:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-22 19:46:08 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-22 19:46:08 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-22 19:46:08 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-22 19:46:08 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-22 19:46:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-22 19:46:08 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-22 19:46:08 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-22 19:46:08 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-22 19:46:08 LOG5 finish_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-22 19:46:08 DONE finish_task: DONE finished selecting: new source 2008-Oct-22 19:46:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-22 19:46:08 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-22 19:46:08 LOG5 end_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-22 19:46:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift43p1" 2008-Oct-22 19:46:08 LOG4 got_cormsg: From DATATAKING: set ra 212600.0 2008-Oct-22 19:46:08 LOG4 got_cormsg: From DATATAKING: set dec +102030 2008-Oct-22 19:46:08 LOG4 got_cormsg: From DATATAKING: vw% 212600.0 2008-Oct-22 19:46:08 LOG4 got_cormsg: From DATATAKING: vw% +102030 2008-Oct-22 19:46:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:46:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-22 19:46:08 LOG4 got_cormsg: From DATATAKING: pnt tr 212600.0 +102030 -CJ 2008-Oct-22 19:46:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-22 19:46:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-22 19:46:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:46:08 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-22 19:46:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:46:23 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-22 19:46:23 LOG4 exec_msg: From OBSERVER: track_new_source drift43p1 212600.0 +102030 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-22 19:46:23 LOG1 track_new_source: Calling 'track_new_source drift43p1 212600.0 +102030 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-22 19:46:23 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-22 19:46:23 LOG5 begin_task: Level: (1) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-22 19:46:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift43p1} INFO {Selecting source 'drift43p1' ...} 2008-Oct-22 19:46:23 LOG3 track_source: Calling 'track_source drift43p1 212600.0 +102030 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-22 19:46:23 START begin_task: Starting task 'sending tracking commands' 2008-Oct-22 19:46:23 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-22 19:46:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift43p1} INFO {Slewing to source 'drift43p1' ...} 2008-Oct-22 19:46:23 INFO1 track_source: Starting to track drift43p1 2008-Oct-22 19:46:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift43p1" 2008-Oct-22 19:46:23 LOG3 vw_send: To DATATAKING: set ra 212600.0 2008-Oct-22 19:46:23 LOG3 vw_send: To DATATAKING: set dec +102030 2008-Oct-22 19:46:23 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-22 19:46:23 LOG3 vw_send: To DATATAKING: pnt tr 212600.0 +102030 -CJ 2008-Oct-22 19:46:23 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-22 19:46:23 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-22 19:46:23 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-22 19:46:23 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-22 19:46:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-22 19:46:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-22 19:46:23 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-22 19:46:23 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-22 19:46:23 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-22 19:46:23 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-22 19:46:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-22 19:46:23 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-22 19:46:23 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-22 19:46:23 LOG5 finish_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-22 19:46:23 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-22 19:46:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-22 19:46:23 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-22 19:46:23 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-22 19:46:23 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-22 19:46:23 LOG5 finish_task: Level: (1) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-22 19:46:23 DONE finish_task: DONE finished selecting: new source 2008-Oct-22 19:46:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-22 19:46:23 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-22 19:46:24 LOG5 end_task: Level: (1) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-22 19:46:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift43p1" 2008-Oct-22 19:46:24 LOG4 got_cormsg: From DATATAKING: set ra 212600.0 2008-Oct-22 19:46:24 LOG4 got_cormsg: From DATATAKING: vw% 212600.0 2008-Oct-22 19:46:24 LOG4 got_cormsg: From DATATAKING: 2008-Oct-22 19:46:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:46:24 LOG4 got_cormsg: From DATATAKING: set dec +102030 2008-Oct-22 19:46:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-22 19:46:24 LOG4 got_cormsg: From DATATAKING: pnt tr 212600.0 +102030 -CJ 2008-Oct-22 19:46:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-22 19:46:24 LOG4 got_cormsg: From DATATAKING: +102030 2008-Oct-22 19:46:24 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2008-Oct-22 19:46:24 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-22 19:46:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:46:29 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-22 19:46:29 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-22 19:46:29 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-22 19:46:29 LOG5 begin_task: Level: (1) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-22 19:46:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-22 19:46:29 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-22 19:46:29 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-22 19:46:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-22 19:46:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:46:29 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-22 19:46:29 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-22 19:46:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-22 19:46:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:46:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:46:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-22 19:46:33 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-22 19:46:33 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-22 19:46:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-22 19:46:33 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-22 19:46:33 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-22 19:46:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-22 19:46:33 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-22 19:46:33 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-22 19:46:33 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-22 19:46:33 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-22 19:46:33 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-22 19:46:33 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-22 19:46:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-22 19:46:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:46:33 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 5 dB 2008-Oct-22 19:46:33 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2008-Oct-22 19:46:33 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 3 2 dB 2008-Oct-22 19:46:33 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Oct-22 19:46:33 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-22 19:46:33 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-22 19:46:33 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-22 19:46:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.053 1.013 ALFA beam 1: 0.996 1.095 2008-Oct-22 19:46:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.917 1.087 ALFA beam 3: 0.945 1.039 2008-Oct-22 19:46:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.908 1.005 ALFA beam 5: 0.962 1.037 2008-Oct-22 19:46:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.010 0.097 ALFA beam 7: 0.896 0.107 2008-Oct-22 19:46:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-22 19:46:33 LOG5 finish_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-22 19:46:33 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Oct-22 19:46:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-22 19:46:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-22 19:46:33 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-22 19:46:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-22 19:46:34 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-22 19:46:34 LOG5 finish_task: Level: (1) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-22 19:46:34 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-22 19:46:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-22 19:46:34 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-22 19:46:34 LOG5 end_task: Level: (1) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-22 19:46:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Oct-22 19:46:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.013 0.996 1.095 2008-Oct-22 19:46:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 1.087 0.945 1.039 2008-Oct-22 19:46:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 1.005 0.962 1.037 2008-Oct-22 19:46:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.097 0.896 0.107 2008-Oct-22 19:46:36 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2008-Oct-22 19:46:36 LOG4 exec_msg: From OBSERVER: new_file manual 2008-Oct-22 19:46:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-22 19:46:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-22 19:46:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-22 19:46:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-22 19:46:36 NOTE new_file: There is no need to start a new FITS-file since the current one 'wapp.20081022.a2010.0011.fits' is empty! 2008-Oct-22 19:46:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-22 19:46:39 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Oct-22 19:46:39 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift43p1 212600.0 +102030 J 0 Topocentric velocity(optical) 2008-Oct-22 19:46:39 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift43p1 212600.0 +102030 J 0 Topocentric velocity(optical)' 2008-Oct-22 19:46:39 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Oct-22 19:46:39 LOG5 begin_task: Level: (1) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-22 19:46:39 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift43p1' 2008-Oct-22 19:46:39 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Oct-22 19:46:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift43p1} 2008-Oct-22 19:46:39 INFO5 fixed_driftmap: Start: year = 2008.8126599931554 RA = 21:26:26.7 Dec = +10:22:57.7 2008-Oct-22 19:46:39 NOTE fixed_driftmap: Setting ZA to 7:58:16.0 ... 2008-Oct-22 19:46:39 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 7.97 2008-Oct-22 19:46:39 LOG3 track_source: Calling 'track_source drift43p1 360.0 7.9711131596 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Oct-22 19:46:39 START begin_task: Starting task 'sending tracking commands' 2008-Oct-22 19:46:39 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-22 19:46:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift43p1} INFO {Slewing to source 'drift43p1' ...} 2008-Oct-22 19:46:39 INFO1 track_source: Starting to track drift43p1 2008-Oct-22 19:46:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift43p1" 2008-Oct-22 19:46:39 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Oct-22 19:46:39 LOG3 vw_send: To DATATAKING: set dec 7.9711131596 2008-Oct-22 19:46:39 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-22 19:46:39 LOG3 vw_send: To DATATAKING: pnt tr 360.0 7.9711131596 -CF 2008-Oct-22 19:46:39 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-22 19:46:39 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-22 19:46:39 LOG5 finish_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-22 19:46:39 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-22 19:46:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-22 19:46:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-22 19:46:39 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-22 19:46:39 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-22 19:46:39 LOG5 begin_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-22 19:46:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-22 19:46:39 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-22 19:46:39 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Oct-22 19:46:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-22 19:46:40 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-22 19:46:40 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-22 19:46:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift43p1" 2008-Oct-22 19:46:40 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Oct-22 19:46:40 LOG4 got_cormsg: From DATATAKING: set dec 7.9711131596 2008-Oct-22 19:46:40 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Oct-22 19:46:40 LOG4 got_cormsg: From DATATAKING: vw% 7.9711131596 2008-Oct-22 19:46:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:46:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-22 19:46:40 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 7.9711131596 -CF 2008-Oct-22 19:46:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-22 19:46:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-22 19:46:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:46:40 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-22 19:46:40 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-22 19:46:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-22 19:46:40 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-22 19:46:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-22 19:46:40 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-22 19:46:40 LOG5 finish_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-22 19:46:40 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-22 19:46:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-22 19:46:41 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-22 19:46:41 LOG5 end_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-22 19:46:41 START begin_task: Starting task 'waiting on telescope' 2008-Oct-22 19:46:41 LOG5 begin_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-22 19:46:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-22 19:46:41 LOG3 waittrk: Start waittrk 5 2008-Oct-22 19:46:41 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-22 19:46:41 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-22 19:46:46 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-22 19:46:46 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-22 19:46:46 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-22 19:46:46 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-22 19:46:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-22 19:46:55 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-22 19:46:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-22 19:46:55 INFO2 waittrk: Now tracking drift43p1 2008-Oct-22 19:46:55 LOG4 waittrk: Current telescope position: Az = 359.62 ZA = 7.93 2008-Oct-22 19:46:55 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-22 19:46:55 LOG5 finish_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-22 19:46:55 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Oct-22 19:46:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-22 19:46:55 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-22 19:46:55 LOG5 end_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-22 19:46:55 START begin_task: Starting task 'selecting calibration type' 2008-Oct-22 19:46:55 LOG5 begin_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-22 19:46:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-22 19:46:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-22 19:46:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:46:55 START begin_task: Starting task 'waiting on setcal' 2008-Oct-22 19:46:55 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-22 19:46:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-22 19:46:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:46:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:46:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-22 19:46:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-22 19:46:55 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-22 19:46:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-22 19:46:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-22 19:46:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-22 19:46:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-22 19:46:55 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-22 19:46:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-22 19:46:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-22 19:46:55 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-22 19:46:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-22 19:46:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-22 19:46:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-22 19:46:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-22 19:46:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-22 19:46:55 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-22 19:46:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:46:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-22 19:46:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-22 19:46:55 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-22 19:46:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-22 19:46:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-22 19:46:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-22 19:46:55 LOG5 end_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-22 19:46:55 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Oct-22 19:46:55 INFO3 dopset_later: Setting Doppler correction now 2008-Oct-22 19:46:55 LOG5 antvel: Calling 'antvel 360.000000 7.971113 F 0' 2008-Oct-22 19:46:55 LOG2 antvel: Transforming current Az = 360.00 ZA = 7.97 to apparent RA = 21:26:59.1 Dec = +10:22:57.7 2008-Oct-22 19:46:55 LOG2 antvel: Parameters to Doppler: Topocentric 85615 2008 296 0.0 2008-Oct-22 19:46:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-22 19:46:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-22 19:46:56 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-22 19:46:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-22 19:46:56 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-22 19:46:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-22 19:46:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-22 19:46:56 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-22 19:46:56 LOG5 begin_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-22 19:46:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-22 19:46:56 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-22 19:46:56 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-22 19:46:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-22 19:46:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:46:56 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-22 19:46:56 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-22 19:46:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-22 19:46:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-22 19:46:56 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-22 19:46:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-22 19:46:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-22 19:46:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:46:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-22 19:46:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-22 19:46:56 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-22 19:46:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-22 19:46:56 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-22 19:46:56 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-22 19:46:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-22 19:46:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-22 19:46:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-22 19:46:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-22 19:46:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-22 19:46:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-22 19:46:56 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-22 19:46:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-22 19:46:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-22 19:46:56 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 5 dB 2008-Oct-22 19:46:56 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2008-Oct-22 19:46:57 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 3 2 dB 2008-Oct-22 19:46:57 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Oct-22 19:46:57 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-22 19:46:57 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-22 19:46:57 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-22 19:46:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.050 1.004 ALFA beam 1: 0.996 1.098 2008-Oct-22 19:46:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.918 1.111 ALFA beam 3: 0.958 1.058 2008-Oct-22 19:46:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.927 1.032 ALFA beam 5: 0.970 1.045 2008-Oct-22 19:46:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.032 0.100 ALFA beam 7: 0.905 0.110 2008-Oct-22 19:46:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-22 19:46:57 LOG5 finish_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-22 19:46:57 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-22 19:46:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-22 19:46:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-22 19:46:57 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-22 19:46:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-22 19:46:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-22 19:46:57 LOG5 finish_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-22 19:46:57 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-22 19:46:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-22 19:46:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-22 19:46:57 LOG5 end_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-22 19:46:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA and KS 2008-Oct-22 19:46:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA and KS 2008-Oct-22 19:46:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA and KS 2008-Oct-22 19:46:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA and KS 2008-Oct-22 19:46:57 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081022.a2010.0011.fits' is empty! 2008-Oct-22 19:46:57 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:26:26.7 LST = 21:27:00.1 diff = -33.4 secs 2008-Oct-22 19:46:57 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Oct-22 19:46:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Oct-22 19:46:57 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-22 19:46:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-22 19:46:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-22 19:46:57 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-22 19:46:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-22 19:46:57 LOG5 begin_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-22 19:46:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-22 19:46:57 INFO2 take_data: Starting WAPP scan: 829600256 2008-Oct-22 19:46:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-22 19:46:58 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-22 19:46:58 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-22 19:46:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA and KS' 2008-Oct-22 19:46:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-22 19:46:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85619.00 2008-Oct-22 19:47:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-22 19:47:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2008-Oct-22 19:47:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-22 19:47:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2008-Oct-22 19:47:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-22 19:47:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2008-Oct-22 19:47:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-22 19:47:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2008-Oct-22 19:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-22 19:47:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-22 19:47:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-22 19:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Oct-22 19:47:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Oct-22 19:47:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Oct-22 19:47:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-22 19:47:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Oct-22 19:47:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Oct-22 19:47:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2008-Oct-22 19:47:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:47:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-22 19:47:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-22 19:47:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-22 19:47:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-22 19:47:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2008-Oct-22 19:47:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-22 19:47:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Oct-22 19:47:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-22 19:47:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-22 19:47:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:47:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-22 19:47:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.015 0.996 1.103 2008-Oct-22 19:47:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.111 0.959 1.062 2008-Oct-22 19:47:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.946 1.057 0.968 1.044 2008-Oct-22 19:47:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.100 0.908 0.110 2008-Oct-22 19:47:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-22 19:47:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Oct-22 19:47:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2008-Oct-22 19:47:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2008-Oct-22 19:47:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2008-Oct-22 19:47:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-22 19:47:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-22 19:47:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-22 19:47:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2008-Oct-22 19:47:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:47:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:47:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Oct-22 19:47:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Oct-22 19:47:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:48:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Oct-22 19:48:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2008-Oct-22 19:48:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Oct-22 19:48:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2008-Oct-22 19:48:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2008-Oct-22 19:48:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Oct-22 19:48:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Oct-22 19:48:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2008-Oct-22 19:48:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Oct-22 19:48:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Oct-22 19:48:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2008-Oct-22 19:48:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Oct-22 19:48:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Oct-22 19:48:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Oct-22 19:48:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Oct-22 19:48:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Oct-22 19:48:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Oct-22 19:48:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Oct-22 19:48:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:48:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:48:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-22 19:48:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.046 1.009 0.991 1.095 2008-Oct-22 19:48:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 1.113 0.954 1.060 2008-Oct-22 19:48:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 1.029 0.964 1.041 2008-Oct-22 19:48:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.099 0.910 0.110 2008-Oct-22 19:48:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Oct-22 19:48:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Oct-22 19:48:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2008-Oct-22 19:48:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:48:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Oct-22 19:48:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Oct-22 19:48:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2008-Oct-22 19:48:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Oct-22 19:48:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Oct-22 19:48:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Oct-22 19:48:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:48:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Oct-22 19:48:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:48:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:48:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-22 19:49:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Oct-22 19:49:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Oct-22 19:49:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:49:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Oct-22 19:49:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Oct-22 19:49:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Oct-22 19:49:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Oct-22 19:49:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Oct-22 19:49:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Oct-22 19:49:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:49:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Oct-22 19:49:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Oct-22 19:49:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-22 19:49:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:49:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Oct-22 19:49:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Oct-22 19:49:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Oct-22 19:49:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Oct-22 19:49:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Oct-22 19:49:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:49:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Oct-22 19:49:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:49:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Oct-22 19:49:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Oct-22 19:49:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.043 1.010 0.992 1.093 2008-Oct-22 19:49:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.115 0.962 1.063 2008-Oct-22 19:49:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 1.028 0.962 1.034 2008-Oct-22 19:49:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.099 0.905 0.109 2008-Oct-22 19:49:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Oct-22 19:49:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Oct-22 19:49:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:49:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Oct-22 19:49:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-22 19:49:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-22 19:49:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:49:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Oct-22 19:49:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-22 19:49:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-22 19:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008