2008-Oct-21 19:38:33 BEGIN executive: CIMA executive starting ... 2008-Oct-21 19:38:33 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-21 19:38:33 INFO1 executive: Using CIMA version 3.0.05 'next' from 2008-10-21 17:39 2008-Oct-21 19:38:33 INFO4 executive: This is an ON-LINE session 2008-Oct-21 19:38:33 INFO4 executive: This is a LOCAL session 2008-Oct-21 19:38:33 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-21 19:38:33 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'CA + KS' 2008-Oct-21 19:38:33 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081021' 2008-Oct-21 19:38:34 LOG2 log_preferences: Currently applied preferences: 2008-Oct-21 19:38:34 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-21 19:38:34 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-21 19:38:34 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-21 19:38:34 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-21 19:38:34 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-21 19:38:34 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-21 19:38:34 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-21 19:38:34 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-21 19:38:34 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-21 19:38:34 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-21 19:38:34 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-21 19:38:34 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-21 19:38:34 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-21 19:38:34 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-21 19:38:34 ALERT executive: CIMA executive ready 2008-Oct-21 19:38:35 NOTE frontend: CIMA frontend ready 2008-Oct-21 19:38:37 LOG4 got_cormsg: From DATATAKING: vw% setup 2008-Oct-21 19:38:39 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-21 19:38:39 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-21 19:38:39 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-21 19:38:39 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-21 19:38:40 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-21 19:38:40 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-21 19:38:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-21 19:38:40 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-21 19:38:40 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-21 19:38:40 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-21 19:38:40 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-21 19:38:40 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-21 19:38:40 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-21 19:38:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:38:40 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-21 19:38:40 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-21 19:38:44 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Oct-21 19:38:44 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Oct-21 19:38:44 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-21 19:38:44 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-21 19:38:44 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-21 19:38:44 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-21 19:38:44 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-21 19:38:44 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-21 19:38:44 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-21 19:38:45 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-21 19:38:45 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-21 19:38:45 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-21 19:38:45 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-21 19:38:45 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:38:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:38:48 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-21 19:38:48 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-21 19:38:48 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-21 19:38:48 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-21 19:38:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:38:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:03 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-21 19:39:15 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-21 19:39:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-21 19:39:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-21 19:39:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-21 19:39:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-21 19:39:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-21 19:39:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-21 19:39:15 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-21 19:39:15 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-21 19:39:15 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-21 19:39:15 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-21 19:39:15 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-21 19:39:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-21 19:39:15 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-21 19:39:16 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-21 19:39:16 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-21 19:39:16 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-21 19:39:16 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-21 19:39:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-21 19:39:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-21 19:39:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-21 19:39:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-21 19:39:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-21 19:39:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-21 19:39:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-21 19:39:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-21 19:39:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-21 19:39:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-21 19:39:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-21 19:39:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-21 19:39:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-21 19:39:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-21 19:39:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-21 19:39:18 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-21 19:39:18 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-21 19:39:18 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-21 19:39:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-21 19:39:18 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-21 19:39:18 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-21 19:39:18 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Oct-21 19:39:18 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-21 19:39:18 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-21 19:39:18 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-21 19:39:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-21 19:39:18 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-21 19:39:18 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-21 19:39:18 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-21 19:39:18 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-21 19:39:18 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-21 19:39:18 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-21 19:39:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:39:18 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-21 19:39:18 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-21 19:39:18 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-21 19:39:18 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-21 19:39:18 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-21 19:39:18 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-21 19:39:18 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-21 19:39:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-21 19:39:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 19:39:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-21 19:39:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 19:39:18 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-21 19:39:18 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-21 19:39:18 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-21 19:39:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 19:39:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 19:39:19 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-21 19:39:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 19:39:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-21 19:39:19 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-21 19:39:19 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-21 19:39:19 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-21 19:39:19 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-21 19:39:19 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-21 19:39:19 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-21 19:39:19 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-21 19:39:19 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-21 19:39:19 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-21 19:39:19 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-21 19:39:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-21 19:39:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:39:19 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-21 19:39:19 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-21 19:39:19 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-21 19:39:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-21 19:39:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-21 19:39:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-21 19:39:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-21 19:39:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-21 19:39:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-21 19:39:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-21 19:39:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-21 19:39:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-21 19:39:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-21 19:39:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-21 19:39:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-21 19:39:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-21 19:39:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-21 19:39:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:39:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-21 19:39:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-21 19:39:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-21 19:39:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-21 19:39:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:39:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:34 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 19:39:34 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-21 19:39:34 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-21 19:39:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-21 19:39:34 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-21 19:39:34 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-21 19:39:34 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-21 19:39:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:39:35 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-21 19:39:35 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-21 19:39:35 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-21 19:39:35 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-21 19:39:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-21 19:39:35 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-21 19:39:35 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-21 19:39:35 START begin_task: Starting task 'selecting calibration port' 2008-Oct-21 19:39:35 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-21 19:39:35 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-21 19:39:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-21 19:39:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:39:35 START begin_task: Starting task 'waiting on calport' 2008-Oct-21 19:39:35 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-21 19:39:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:35 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-21 19:39:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:39:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:35 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 19:39:35 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-21 19:39:35 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-21 19:39:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-21 19:39:35 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-21 19:39:35 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-21 19:39:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-21 19:39:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-21 19:39:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 19:39:35 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-21 19:39:35 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 19:39:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-21 19:39:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 19:39:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 19:39:35 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-21 19:39:35 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-21 19:39:35 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-21 19:39:35 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-21 19:39:35 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-21 19:39:35 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-21 19:39:35 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-21 19:39:35 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-21 19:39:35 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-21 19:39:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA + KS 2008-Oct-21 19:39:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA + KS 2008-Oct-21 19:39:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA + KS 2008-Oct-21 19:39:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA + KS 2008-Oct-21 19:39:35 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-21 19:39:35 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-21 19:39:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 19:39:35 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-21 19:39:35 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 19:39:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-21 19:39:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 19:39:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 19:39:36 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-21 19:39:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA + KS 2008-Oct-21 19:39:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA + KS 2008-Oct-21 19:39:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA + KS 2008-Oct-21 19:39:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA + KS 2008-Oct-21 19:39:36 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-21 19:39:36 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-21 19:39:36 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-21 19:39:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:39:36 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-21 19:39:36 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-21 19:39:36 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-21 19:39:36 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-21 19:39:36 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-21 19:39:36 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-21 19:39:36 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-21 19:39:36 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-21 19:39:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-21 19:39:36 LOG3 track_source: Calling 'track_source galfasrc 211600.0 +103506 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-21 19:39:36 START begin_task: Starting task 'sending tracking commands' 2008-Oct-21 19:39:36 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-21 19:39:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-21 19:39:36 INFO1 track_source: Starting to track galfasrc 2008-Oct-21 19:39:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-21 19:39:36 LOG3 vw_send: To DATATAKING: set ra 211600.0 2008-Oct-21 19:39:36 LOG3 vw_send: To DATATAKING: set dec +103506 2008-Oct-21 19:39:36 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-21 19:39:36 LOG3 vw_send: To DATATAKING: pnt tr 211600.0 +103506 -CJ 2008-Oct-21 19:39:36 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-21 19:39:36 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-21 19:39:36 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-21 19:39:36 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-21 19:39:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:39:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-21 19:39:36 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-21 19:39:36 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-21 19:39:36 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-21 19:39:36 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-21 19:39:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:39:36 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-21 19:39:36 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-21 19:39:36 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-21 19:39:36 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-21 19:39:36 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-21 19:39:37 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-21 19:39:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-21 19:39:37 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-21 19:39:37 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-21 19:39:37 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-21 19:39:37 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-21 19:39:37 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-21 19:39:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA + KS' 2008-Oct-21 19:39:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20081021.a2010.0012.fits 2008-Oct-21 19:39:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-21 19:39:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-21 19:39:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-21 19:39:37 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081021.a2010.0012.fits} 2008-Oct-21 19:39:37 LOG4 got_cormsg: From DATATAKING: set ra 211600.0 2008-Oct-21 19:39:37 LOG4 got_cormsg: From DATATAKING: set dec +103506 2008-Oct-21 19:39:37 LOG4 got_cormsg: From DATATAKING: vw% 211600.0 2008-Oct-21 19:39:37 LOG4 got_cormsg: From DATATAKING: vw% +103506 2008-Oct-21 19:39:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-21 19:39:37 LOG4 got_cormsg: From DATATAKING: pnt tr 211600.0 +103506 -CJ 2008-Oct-21 19:39:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-21 19:39:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-21 19:39:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:39:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA + KS' 2008-Oct-21 19:39:49 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-21 19:39:49 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-21 19:39:49 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-21 19:39:49 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-21 19:39:49 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-21 19:39:49 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-21 19:39:49 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-21 19:39:49 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-21 19:39:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:39:49 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-21 19:39:49 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-21 19:39:49 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-21 19:39:49 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-21 19:39:49 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-21 19:39:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-21 19:39:49 LOG3 waittrk: Start waittrk 5 2008-Oct-21 19:39:49 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-21 19:39:49 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-21 19:39:54 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-21 19:39:54 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-21 19:39:54 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-21 19:39:54 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-21 19:40:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-21 19:40:53 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-21 19:40:53 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-21 19:40:53 INFO2 waittrk: Now tracking galfasrc 2008-Oct-21 19:40:53 LOG4 waittrk: Current telescope position: Az = 360.64 ZA = 7.69 2008-Oct-21 19:40:53 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-21 19:40:53 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-21 19:40:53 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-21 19:40:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:40:53 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-21 19:40:53 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-21 19:40:53 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-21 19:40:53 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-21 19:40:53 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-21 19:40:53 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-21 19:40:53 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-21 19:40:54 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-21 19:40:54 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-21 19:40:54 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-21 19:40:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-21 19:40:54 START begin_task: Starting task 'selecting calibration type' 2008-Oct-21 19:40:54 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-21 19:40:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-21 19:40:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-21 19:40:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:40:54 START begin_task: Starting task 'waiting on setcal' 2008-Oct-21 19:40:54 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-21 19:40:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-21 19:40:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:40:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:40:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 19:40:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-21 19:40:54 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-21 19:40:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-21 19:40:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 19:40:54 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-21 19:40:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 19:40:54 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-21 19:40:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 19:40:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 19:40:54 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-21 19:40:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 19:40:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-21 19:40:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 19:40:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-21 19:40:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 19:40:54 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-21 19:40:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:40:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 19:40:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 19:40:54 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-21 19:40:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 19:40:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-21 19:40:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-21 19:40:54 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-21 19:40:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA + KS 2008-Oct-21 19:40:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA + KS 2008-Oct-21 19:40:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA + KS 2008-Oct-21 19:40:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA + KS 2008-Oct-21 19:40:54 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081021.a2010.0012.fits' is empty! 2008-Oct-21 19:40:54 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-21 19:40:54 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-21 19:40:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-21 19:40:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-21 19:40:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-21 19:40:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 19:40:54 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-21 19:40:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 19:40:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-21 19:40:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 19:40:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 19:40:54 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-21 19:40:54 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-21 19:40:54 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-21 19:40:54 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-21 19:40:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-21 19:40:54 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-21 19:40:54 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-21 19:40:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-21 19:40:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:40:55 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-21 19:40:55 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-21 19:40:55 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-21 19:40:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:40:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA + KS' 2008-Oct-21 19:40:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:40:58 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 19:40:58 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-21 19:40:58 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-21 19:40:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-21 19:40:58 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-21 19:40:58 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-21 19:40:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-21 19:40:58 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-21 19:40:58 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-21 19:40:58 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-21 19:40:58 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-21 19:40:58 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-21 19:40:58 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-21 19:40:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:40:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-21 19:40:58 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 5 dB 2008-Oct-21 19:40:58 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 5 4 dB 2008-Oct-21 19:40:58 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 3 2 dB 2008-Oct-21 19:40:58 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Oct-21 19:40:58 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-21 19:40:58 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-21 19:40:58 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-21 19:40:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.053 0.981 ALFA beam 1: 0.973 1.093 2008-Oct-21 19:40:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.902 1.102 ALFA beam 3: 0.945 1.028 2008-Oct-21 19:40:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.093 0.994 ALFA beam 5: 0.943 1.024 2008-Oct-21 19:40:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.001 0.098 ALFA beam 7: 0.887 0.109 2008-Oct-21 19:40:58 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-21 19:40:58 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-21 19:40:58 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-21 19:40:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:40:58 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-21 19:40:58 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-21 19:40:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-21 19:40:58 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-21 19:40:58 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-21 19:40:58 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-21 19:40:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:40:59 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-21 19:40:59 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-21 19:40:59 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-21 19:40:59 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-21 19:40:59 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-21 19:40:59 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:40:59 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80991 J 2008-Oct-21 19:40:59 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:40:59 LOG2 antvel: Parameters to Doppler: Topocentric 85258 2008 295 0.0 2008-Oct-21 19:40:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:40:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-21 19:40:59 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-21 19:40:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:40:59 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:40:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-21 19:40:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:40:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:40:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:40:59 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-21 19:40:59 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.284597 2008.8099113367305 18.999933 2008-Oct-21 19:40:59 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666833 10.585000000000003 2008-Oct-21 19:40:59 LOG4 log_alfabeam: ALFABEAM 1 21.265645398570161 10.690058258257967 2008-Oct-21 19:40:59 LOG4 log_alfabeam: ALFABEAM 2 21.260881033642427 10.621952132424402 2008-Oct-21 19:40:59 LOG4 log_alfabeam: ALFABEAM 3 21.261851142990668 10.516763028801382 2008-Oct-21 19:40:59 LOG4 log_alfabeam: ALFABEAM 4 21.267719108960566 10.479970431799881 2008-Oct-21 19:40:59 LOG4 log_alfabeam: ALFABEAM 5 21.272504563724869 10.548967865704988 2008-Oct-21 19:40:59 LOG4 log_alfabeam: ALFABEAM 6 21.271401035453231 10.653857768476302 2008-Oct-21 19:40:59 INFO2 take_data: Starting WAPP+GALFA scan: 829500099 2008-Oct-21 19:40:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:40:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:40:59 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-21 19:40:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:40:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-21 19:40:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:40:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:40:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:40:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85260.00 2008-Oct-21 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:41:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Oct-21 19:41:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.981 0.973 1.093 2008-Oct-21 19:41:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 1.102 0.945 1.028 2008-Oct-21 19:41:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.994 0.943 1.024 2008-Oct-21 19:41:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.098 0.887 0.109 2008-Oct-21 19:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.149 (still bad) 2008-Oct-21 19:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.150 (still bad) 2008-Oct-21 19:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.150 (still bad) 2008-Oct-21 19:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.152 (still bad) 2008-Oct-21 19:41:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:41:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:41:10 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-21 19:41:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:41:10 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-21 19:41:10 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-21 19:41:10 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-21 19:41:10 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-21 19:41:10 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:41:10 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80991 J 2008-Oct-21 19:41:10 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:41:10 LOG2 antvel: Parameters to Doppler: Topocentric 85269 2008 295 0.0 2008-Oct-21 19:41:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:41:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-21 19:41:10 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-21 19:41:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:41:10 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:41:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-21 19:41:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:41:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:41:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:41:10 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-21 19:41:10 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.287661 2008.8099116852993 18.999933 2008-Oct-21 19:41:10 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666787 10.584999999999997 2008-Oct-21 19:41:10 LOG4 log_alfabeam: ALFABEAM 1 21.265685725926737 10.690141744920693 2008-Oct-21 19:41:10 LOG4 log_alfabeam: ALFABEAM 2 21.260895294209845 10.622433975627247 2008-Oct-21 19:41:10 LOG4 log_alfabeam: ALFABEAM 3 21.261825053105852 10.517165670008607 2008-Oct-21 19:41:10 LOG4 log_alfabeam: ALFABEAM 4 21.267678815166125 10.479884340135101 2008-Oct-21 19:41:10 LOG4 log_alfabeam: ALFABEAM 5 21.272490642163142 10.548481522905684 2008-Oct-21 19:41:10 LOG4 log_alfabeam: ALFABEAM 6 21.271427381407495 10.653461798350824 2008-Oct-21 19:41:10 INFO2 take_data: Starting WAPP+GALFA scan: 829500100 2008-Oct-21 19:41:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:41:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:41:11 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-21 19:41:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:41:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-21 19:41:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:41:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:41:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:41:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85272.00 2008-Oct-21 19:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.151 (still bad) 2008-Oct-21 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2008-Oct-21 19:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2008-Oct-21 19:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2008-Oct-21 19:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2008-Oct-21 19:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2008-Oct-21 19:41:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:41:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:41:22 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-21 19:41:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:41:22 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-21 19:41:22 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-21 19:41:22 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-21 19:41:22 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-21 19:41:22 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:41:22 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80991 J 2008-Oct-21 19:41:22 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:41:22 LOG2 antvel: Parameters to Doppler: Topocentric 85282 2008 295 0.0 2008-Oct-21 19:41:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:41:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-21 19:41:22 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-21 19:41:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:41:22 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:41:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-21 19:41:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:41:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:41:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:41:22 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-21 19:41:22 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.291282 2008.8099120972445 18.999933 2008-Oct-21 19:41:22 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666740 10.585000000000001 2008-Oct-21 19:41:22 LOG4 log_alfabeam: ALFABEAM 1 21.265733408006117 10.690236039645461 2008-Oct-21 19:41:22 LOG4 log_alfabeam: ALFABEAM 2 21.260912378227275 10.623001657956465 2008-Oct-21 19:41:22 LOG4 log_alfabeam: ALFABEAM 3 21.261794431978835 10.517644126281274 2008-Oct-21 19:41:22 LOG4 log_alfabeam: ALFABEAM 4 21.267631170156271 10.479786963776123 2008-Oct-21 19:41:22 LOG4 log_alfabeam: ALFABEAM 5 21.272473954177347 10.547908449008652 2008-Oct-21 19:41:22 LOG4 log_alfabeam: ALFABEAM 6 21.271458311600721 10.652991166292008 2008-Oct-21 19:41:22 INFO2 take_data: Starting WAPP+GALFA scan: 829500101 2008-Oct-21 19:41:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:41:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:41:23 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-21 19:41:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:41:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-21 19:41:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:41:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:41:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:41:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85284.00 2008-Oct-21 19:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2008-Oct-21 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2008-Oct-21 19:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2008-Oct-21 19:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2008-Oct-21 19:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2008-Oct-21 19:41:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:41:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:41:34 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-21 19:41:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:41:34 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-21 19:41:34 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-21 19:41:34 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-21 19:41:34 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-21 19:41:34 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:41:34 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80991 J 2008-Oct-21 19:41:34 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:41:34 LOG2 antvel: Parameters to Doppler: Topocentric 85294 2008 295 0.0 2008-Oct-21 19:41:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:41:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-21 19:41:34 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-21 19:41:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:41:34 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:41:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-21 19:41:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:41:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:41:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:41:34 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-21 19:41:34 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.294624 2008.8099124775015 18.999933 2008-Oct-21 19:41:34 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666779 10.585000000000003 2008-Oct-21 19:41:34 LOG4 log_alfabeam: ALFABEAM 1 21.265777433475574 10.690318863226352 2008-Oct-21 19:41:34 LOG4 log_alfabeam: ALFABEAM 2 21.260928365809058 10.623523851279895 2008-Oct-21 19:41:34 LOG4 log_alfabeam: ALFABEAM 3 21.261766376869861 10.518088177886932 2008-Oct-21 19:41:34 LOG4 log_alfabeam: ALFABEAM 4 21.267587176402074 10.479701293754893 2008-Oct-21 19:41:34 LOG4 log_alfabeam: ALFABEAM 5 21.272458327605232 10.547381209714391 2008-Oct-21 19:41:34 LOG4 log_alfabeam: ALFABEAM 6 21.271486658083120 10.652554277029123 2008-Oct-21 19:41:34 INFO2 take_data: Starting WAPP+GALFA scan: 829500102 2008-Oct-21 19:41:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:41:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:41:35 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-21 19:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2008-Oct-21 19:41:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:41:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-21 19:41:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:41:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:41:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:41:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85296.00 2008-Oct-21 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2008-Oct-21 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2008-Oct-21 19:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2008-Oct-21 19:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2008-Oct-21 19:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2008-Oct-21 19:41:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:41:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:41:46 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-21 19:41:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:41:46 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-21 19:41:46 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-21 19:41:46 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-21 19:41:46 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-21 19:41:46 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:41:46 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80991 J 2008-Oct-21 19:41:46 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:41:46 LOG2 antvel: Parameters to Doppler: Topocentric 85306 2008 295 0.0 2008-Oct-21 19:41:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:41:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-21 19:41:46 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-21 19:41:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:41:46 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:41:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-21 19:41:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:41:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:41:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:41:46 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-21 19:41:46 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.297967 2008.8099128577587 18.999933 2008-Oct-21 19:41:46 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666758 10.584999999999997 2008-Oct-21 19:41:46 LOG4 log_alfabeam: ALFABEAM 1 21.265821483384929 10.690397668403730 2008-Oct-21 19:41:46 LOG4 log_alfabeam: ALFABEAM 2 21.260944567097066 10.624044460707582 2008-Oct-21 19:41:46 LOG4 log_alfabeam: ALFABEAM 3 21.261738514925490 10.518534667844806 2008-Oct-21 19:41:46 LOG4 log_alfabeam: ALFABEAM 4 21.267543155813289 10.479619639824078 2008-Oct-21 19:41:46 LOG4 log_alfabeam: ALFABEAM 5 21.272442483023475 10.546855487069870 2008-Oct-21 19:41:46 LOG4 log_alfabeam: ALFABEAM 6 21.271514817286413 10.652114893215956 2008-Oct-21 19:41:46 INFO2 take_data: Starting WAPP+GALFA scan: 829500103 2008-Oct-21 19:41:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:41:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:41:47 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-21 19:41:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:41:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-21 19:41:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:41:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:41:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2008-Oct-21 19:41:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85308.00 2008-Oct-21 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2008-Oct-21 19:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2008-Oct-21 19:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2008-Oct-21 19:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2008-Oct-21 19:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2008-Oct-21 19:41:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:41:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:41:58 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-21 19:41:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:41:58 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-21 19:41:58 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-21 19:41:58 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-21 19:41:58 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-21 19:41:58 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:41:58 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80991 J 2008-Oct-21 19:41:58 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:41:58 LOG2 antvel: Parameters to Doppler: Topocentric 85318 2008 295 0.0 2008-Oct-21 19:41:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:41:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-21 19:41:58 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-21 19:41:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:41:58 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:41:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-21 19:41:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:41:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:41:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:41:58 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-21 19:41:58 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.301309 2008.8099132380157 18.999933 2008-Oct-21 19:41:58 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666687 10.584999999999996 2008-Oct-21 19:41:58 LOG4 log_alfabeam: ALFABEAM 1 21.265865526164532 10.690472405416621 2008-Oct-21 19:41:58 LOG4 log_alfabeam: ALFABEAM 2 21.260960970129950 10.624563116471833 2008-Oct-21 19:41:58 LOG4 log_alfabeam: ALFABEAM 3 21.261710865759262 10.518983272230399 2008-Oct-21 19:41:58 LOG4 log_alfabeam: ALFABEAM 4 21.267499139939201 10.479542054126341 2008-Oct-21 19:41:58 LOG4 log_alfabeam: ALFABEAM 5 21.272426432102179 10.546331655217026 2008-Oct-21 19:41:58 LOG4 log_alfabeam: ALFABEAM 6 21.271542769340162 10.651673332933388 2008-Oct-21 19:41:58 INFO2 take_data: Starting WAPP+GALFA scan: 829500104 2008-Oct-21 19:41:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:41:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:41:59 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-21 19:41:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:41:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-21 19:41:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:41:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:41:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:41:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85320.00 2008-Oct-21 19:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2008-Oct-21 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:42:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:42:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 0.978 0.968 1.092 2008-Oct-21 19:42:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 1.119 0.953 1.044 2008-Oct-21 19:42:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 1.010 0.932 1.018 2008-Oct-21 19:42:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.100 0.894 0.111 2008-Oct-21 19:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2008-Oct-21 19:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2008-Oct-21 19:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2008-Oct-21 19:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2008-Oct-21 19:42:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:42:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:42:10 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-21 19:42:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:42:10 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-21 19:42:10 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-21 19:42:10 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-21 19:42:10 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-21 19:42:10 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:42:10 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80991 J 2008-Oct-21 19:42:10 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:42:10 LOG2 antvel: Parameters to Doppler: Topocentric 85330 2008 295 0.0 2008-Oct-21 19:42:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:42:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-21 19:42:10 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-21 19:42:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:42:10 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:42:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-21 19:42:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:42:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:42:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:42:10 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-21 19:42:10 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.304652 2008.8099136182727 18.999933 2008-Oct-21 19:42:10 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666637 10.585000000000003 2008-Oct-21 19:42:10 LOG4 log_alfabeam: ALFABEAM 1 21.265909582960230 10.690543117820519 2008-Oct-21 19:42:10 LOG4 log_alfabeam: ALFABEAM 2 21.260977582384875 10.625080071372176 2008-Oct-21 19:42:10 LOG4 log_alfabeam: ALFABEAM 3 21.261683415691977 10.519434201978923 2008-Oct-21 19:42:10 LOG4 log_alfabeam: ALFABEAM 4 21.267455107648207 10.479468492077851 2008-Oct-21 19:42:10 LOG4 log_alfabeam: ALFABEAM 5 21.272410167499888 10.545809459601770 2008-Oct-21 19:42:10 LOG4 log_alfabeam: ALFABEAM 6 21.271570528022337 10.651229387900690 2008-Oct-21 19:42:10 INFO2 take_data: Starting WAPP+GALFA scan: 829500105 2008-Oct-21 19:42:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:42:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:42:11 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-21 19:42:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:42:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-21 19:42:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:42:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:42:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:42:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85332.00 2008-Oct-21 19:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2008-Oct-21 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2008-Oct-21 19:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2008-Oct-21 19:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2008-Oct-21 19:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2008-Oct-21 19:42:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2008-Oct-21 19:42:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:42:22 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-21 19:42:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:42:22 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-21 19:42:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-21 19:42:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-21 19:42:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-21 19:42:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 19:42:22 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-21 19:42:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 19:42:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-21 19:42:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 19:42:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 19:42:22 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-21 19:42:22 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-21 19:42:22 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-21 19:42:22 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-21 19:42:22 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:42:22 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80991 J 2008-Oct-21 19:42:22 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:42:22 LOG2 antvel: Parameters to Doppler: Topocentric 85342 2008 295 0.0 2008-Oct-21 19:42:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:42:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-21 19:42:22 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-21 19:42:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:42:22 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:42:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-21 19:42:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:42:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:42:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:42:22 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-21 19:42:22 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.307994 2008.8099139985297 18.999933 2008-Oct-21 19:42:22 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666698 10.585000000000003 2008-Oct-21 19:42:22 LOG4 log_alfabeam: ALFABEAM 1 21.265953622214706 10.690609763581671 2008-Oct-21 19:42:22 LOG4 log_alfabeam: ALFABEAM 2 21.260994391517176 10.625594959341402 2008-Oct-21 19:42:22 LOG4 log_alfabeam: ALFABEAM 3 21.261656183932992 10.519887129143212 2008-Oct-21 19:42:22 LOG4 log_alfabeam: ALFABEAM 4 21.267411090482618 10.479398998091948 2008-Oct-21 19:42:22 LOG4 log_alfabeam: ALFABEAM 5 21.272393701280386 10.545289270795417 2008-Oct-21 19:42:22 LOG4 log_alfabeam: ALFABEAM 6 21.271598073855071 10.650783380358986 2008-Oct-21 19:42:22 INFO2 take_data: Starting WAPP+GALFA scan: 829500106 2008-Oct-21 19:42:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:42:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:42:23 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-21 19:42:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:42:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-21 19:42:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:42:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:42:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:42:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85344.00 2008-Oct-21 19:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2008-Oct-21 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.597 (still bad) 2008-Oct-21 19:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.597 (still bad) 2008-Oct-21 19:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.596 (still bad) 2008-Oct-21 19:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.599 (still bad) 2008-Oct-21 19:42:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:42:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:42:34 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-21 19:42:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:42:34 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-21 19:42:34 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-21 19:42:34 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-21 19:42:34 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-21 19:42:34 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:42:34 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80991 J 2008-Oct-21 19:42:34 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:42:34 LOG2 antvel: Parameters to Doppler: Topocentric 85354 2008 295 0.0 2008-Oct-21 19:42:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:42:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-21 19:42:34 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-21 19:42:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:42:34 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:42:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-21 19:42:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:42:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:42:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:42:34 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-21 19:42:34 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.311337 2008.8099143787867 18.999933 2008-Oct-21 19:42:34 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666733 10.585000000000004 2008-Oct-21 19:42:34 LOG4 log_alfabeam: ALFABEAM 1 21.265997665093916 10.690672384291053 2008-Oct-21 19:42:34 LOG4 log_alfabeam: ALFABEAM 2 21.261011405112740 10.626108032501186 2008-Oct-21 19:42:34 LOG4 log_alfabeam: ALFABEAM 3 21.261629156892283 10.520342265951186 2008-Oct-21 19:42:34 LOG4 log_alfabeam: ALFABEAM 4 21.267367067289573 10.479333529545587 2008-Oct-21 19:42:34 LOG4 log_alfabeam: ALFABEAM 5 21.272377025992085 10.544770834898243 2008-Oct-21 19:42:34 LOG4 log_alfabeam: ALFABEAM 6 21.271625420529062 10.650335100727174 2008-Oct-21 19:42:34 INFO2 take_data: Starting WAPP+GALFA scan: 829500107 2008-Oct-21 19:42:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:42:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:42:35 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-21 19:42:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:42:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-21 19:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.598 (still bad) 2008-Oct-21 19:42:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:42:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:42:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:42:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85356.00 2008-Oct-21 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.599 (still bad) 2008-Oct-21 19:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.591 (still bad) 2008-Oct-21 19:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.592 (still bad) 2008-Oct-21 19:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.589 (still bad) 2008-Oct-21 19:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.591 (still bad) 2008-Oct-21 19:42:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:42:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:42:46 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-21 19:42:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:42:46 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-21 19:42:46 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-21 19:42:46 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-21 19:42:46 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-21 19:42:46 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:42:46 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80991 J 2008-Oct-21 19:42:46 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:42:46 LOG2 antvel: Parameters to Doppler: Topocentric 85366 2008 295 0.0 2008-Oct-21 19:42:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:42:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-21 19:42:46 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-21 19:42:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:42:46 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:42:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-21 19:42:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:42:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:42:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:42:46 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-21 19:42:46 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.314679 2008.809914759044 18.999933 2008-Oct-21 19:42:46 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666708 10.585000000000003 2008-Oct-21 19:42:46 LOG4 log_alfabeam: ALFABEAM 1 21.266041680077748 10.690730945620615 2008-Oct-21 19:42:46 LOG4 log_alfabeam: ALFABEAM 2 21.261028610455948 10.626618928743405 2008-Oct-21 19:42:46 LOG4 log_alfabeam: ALFABEAM 3 21.261602353363138 10.520799280718855 2008-Oct-21 19:42:46 LOG4 log_alfabeam: ALFABEAM 4 21.267323069579287 10.479272123140165 2008-Oct-21 19:42:46 LOG4 log_alfabeam: ALFABEAM 5 21.272360154080044 10.544254518644252 2008-Oct-21 19:42:46 LOG4 log_alfabeam: ALFABEAM 6 21.271652548970636 10.649884875128473 2008-Oct-21 19:42:46 INFO2 take_data: Starting WAPP+GALFA scan: 829500108 2008-Oct-21 19:42:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:42:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:42:47 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-21 19:42:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:42:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-21 19:42:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:42:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:42:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.591 (still bad) 2008-Oct-21 19:42:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85368.00 2008-Oct-21 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.591 (still bad) 2008-Oct-21 19:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.586 (still bad) 2008-Oct-21 19:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.584 (still bad) 2008-Oct-21 19:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.587 (still bad) 2008-Oct-21 19:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.586 (still bad) 2008-Oct-21 19:42:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:42:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:42:58 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-21 19:42:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:42:58 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-21 19:42:58 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-21 19:42:58 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-21 19:42:58 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-21 19:42:58 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:42:58 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:42:58 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:42:58 LOG2 antvel: Parameters to Doppler: Topocentric 85378 2008 295 0.0 2008-Oct-21 19:42:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:42:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-21 19:42:58 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-21 19:42:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:42:58 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:42:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-21 19:42:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:42:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:42:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:42:58 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-21 19:42:58 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.318022 2008.809915139301 18.999933 2008-Oct-21 19:42:58 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666691 10.585000000000001 2008-Oct-21 19:42:58 LOG4 log_alfabeam: ALFABEAM 1 21.266085688352302 10.690785487174908 2008-Oct-21 19:42:58 LOG4 log_alfabeam: ALFABEAM 2 21.261046015242609 10.627127899496983 2008-Oct-21 19:42:58 LOG4 log_alfabeam: ALFABEAM 3 21.261575759846522 10.521258386974917 2008-Oct-21 19:42:58 LOG4 log_alfabeam: ALFABEAM 4 21.267279076178404 10.479214738235294 2008-Oct-21 19:42:58 LOG4 log_alfabeam: ALFABEAM 5 21.272343077982303 10.543740068801755 2008-Oct-21 19:42:58 LOG4 log_alfabeam: ALFABEAM 6 21.271679472781969 10.649432492674279 2008-Oct-21 19:42:58 INFO2 take_data: Starting WAPP+GALFA scan: 829500109 2008-Oct-21 19:42:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:42:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:42:59 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-21 19:42:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:42:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-21 19:42:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:42:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:42:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:42:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85380.00 2008-Oct-21 19:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.587 (still bad) 2008-Oct-21 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.571 (still bad) 2008-Oct-21 19:43:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 19:43:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.479 1.340 1.343 1.493 2008-Oct-21 19:43:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.247 1.551 1.350 1.451 2008-Oct-21 19:43:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.572 1.420 1.332 1.371 2008-Oct-21 19:43:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.430 0.101 1.258 0.111 2008-Oct-21 19:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.570 (still bad) 2008-Oct-21 19:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.571 (still bad) 2008-Oct-21 19:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.572 (still bad) 2008-Oct-21 19:43:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:43:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:43:10 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-21 19:43:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:43:10 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-21 19:43:10 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-21 19:43:10 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-21 19:43:10 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-21 19:43:10 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:43:10 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:43:10 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:43:10 LOG2 antvel: Parameters to Doppler: Topocentric 85390 2008 295 0.0 2008-Oct-21 19:43:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:43:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-21 19:43:10 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-21 19:43:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:43:10 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:43:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-21 19:43:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:43:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:43:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:43:10 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-21 19:43:10 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.321364 2008.809915519558 18.999933 2008-Oct-21 19:43:10 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666691 10.585000000000001 2008-Oct-21 19:43:10 LOG4 log_alfabeam: ALFABEAM 1 21.266129658458482 10.690835982292452 2008-Oct-21 19:43:10 LOG4 log_alfabeam: ALFABEAM 2 21.261063606399382 10.627634586860195 2008-Oct-21 19:43:10 LOG4 log_alfabeam: ALFABEAM 3 21.261549394708439 10.521719249591158 2008-Oct-21 19:43:10 LOG4 log_alfabeam: ALFABEAM 4 21.267235118541006 10.479161403855970 2008-Oct-21 19:43:10 LOG4 log_alfabeam: ALFABEAM 5 21.272325810512246 10.543227848012000 2008-Oct-21 19:43:10 LOG4 log_alfabeam: ALFABEAM 6 21.271706173306033 10.648978283084814 2008-Oct-21 19:43:10 INFO2 take_data: Starting WAPP+GALFA scan: 829500110 2008-Oct-21 19:43:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:43:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:43:11 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-21 19:43:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:43:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-21 19:43:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:43:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:43:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:43:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85392.00 2008-Oct-21 19:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.572 (still bad) 2008-Oct-21 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.544 (still bad) 2008-Oct-21 19:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.541 (still bad) 2008-Oct-21 19:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.544 (still bad) 2008-Oct-21 19:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.542 (still bad) 2008-Oct-21 19:43:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:43:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:43:22 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-21 19:43:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:43:22 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-21 19:43:22 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-21 19:43:22 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-21 19:43:22 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-21 19:43:22 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:43:22 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:43:22 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:43:22 LOG2 antvel: Parameters to Doppler: Topocentric 85402 2008 295 0.0 2008-Oct-21 19:43:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:43:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-21 19:43:22 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-21 19:43:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:43:22 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:43:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-21 19:43:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:43:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:43:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:43:22 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-21 19:43:22 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.324707 2008.809915899815 18.999933 2008-Oct-21 19:43:22 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666680 10.585000000000004 2008-Oct-21 19:43:22 LOG4 log_alfabeam: ALFABEAM 1 21.266173611602227 10.690882468564997 2008-Oct-21 19:43:22 LOG4 log_alfabeam: ALFABEAM 2 21.261081391733043 10.628139241550734 2008-Oct-21 19:43:22 LOG4 log_alfabeam: ALFABEAM 3 21.261523244542460 10.522182083405287 2008-Oct-21 19:43:22 LOG4 log_alfabeam: ALFABEAM 4 21.267191175473538 10.479112081370005 2008-Oct-21 19:43:22 LOG4 log_alfabeam: ALFABEAM 5 21.272308343996517 10.542717603728121 2008-Oct-21 19:43:22 LOG4 log_alfabeam: ALFABEAM 6 21.271732664054500 10.648522034155842 2008-Oct-21 19:43:22 INFO2 take_data: Starting WAPP+GALFA scan: 829500111 2008-Oct-21 19:43:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:43:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:43:23 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-21 19:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.542 (still bad) 2008-Oct-21 19:43:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:43:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-21 19:43:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:43:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:43:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:43:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85404.00 2008-Oct-21 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.538 (still bad) 2008-Oct-21 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.537 (still bad) 2008-Oct-21 19:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.538 (still bad) 2008-Oct-21 19:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.537 (still bad) 2008-Oct-21 19:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.536 (still bad) 2008-Oct-21 19:43:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:43:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:43:34 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-21 19:43:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:43:34 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-21 19:43:34 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-21 19:43:34 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-21 19:43:34 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-21 19:43:34 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:43:34 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:43:34 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:43:34 LOG2 antvel: Parameters to Doppler: Topocentric 85414 2008 295 0.0 2008-Oct-21 19:43:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:43:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-21 19:43:34 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-21 19:43:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:43:34 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:43:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-21 19:43:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:43:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:43:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:43:34 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-21 19:43:34 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.328049 2008.809916280072 18.999933 2008-Oct-21 19:43:34 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666687 10.585000000000003 2008-Oct-21 19:43:34 LOG4 log_alfabeam: ALFABEAM 1 21.266217516409476 10.690924926941127 2008-Oct-21 19:43:34 LOG4 log_alfabeam: ALFABEAM 2 21.261099357826371 10.628641510108606 2008-Oct-21 19:43:34 LOG4 log_alfabeam: ALFABEAM 3 21.261497327277436 10.522646550142674 2008-Oct-21 19:43:34 LOG4 log_alfabeam: ALFABEAM 4 21.267147278350020 10.479066792179150 2008-Oct-21 19:43:34 LOG4 log_alfabeam: ALFABEAM 5 21.272290691603253 10.542209694254840 2008-Oct-21 19:43:34 LOG4 log_alfabeam: ALFABEAM 6 21.271758926797197 10.648064078913741 2008-Oct-21 19:43:34 INFO2 take_data: Starting WAPP+GALFA scan: 829500112 2008-Oct-21 19:43:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:43:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:43:35 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-21 19:43:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:43:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-21 19:43:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:43:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:43:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.537 (still bad) 2008-Oct-21 19:43:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85416.00 2008-Oct-21 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.531 (still bad) 2008-Oct-21 19:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.531 (still bad) 2008-Oct-21 19:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.532 (still bad) 2008-Oct-21 19:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.533 (still bad) 2008-Oct-21 19:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.532 (still bad) 2008-Oct-21 19:43:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:43:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:43:46 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-21 19:43:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:43:46 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-21 19:43:46 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Oct-21 19:43:46 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-21 19:43:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-21 19:43:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-21 19:43:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-21 19:43:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 19:43:46 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-21 19:43:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 19:43:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-21 19:43:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 19:43:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 19:43:46 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-21 19:43:46 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-21 19:43:46 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-21 19:43:46 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-21 19:43:46 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-21 19:43:46 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:43:46 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:43:46 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:43:46 LOG2 antvel: Parameters to Doppler: Topocentric 85426 2008 295 0.0 2008-Oct-21 19:43:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:43:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-21 19:43:46 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-21 19:43:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:43:46 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:43:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-21 19:43:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:43:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:43:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:43:46 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-21 19:43:46 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.331391 2008.8099166603292 18.999933 2008-Oct-21 19:43:46 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666687 10.585000000000008 2008-Oct-21 19:43:46 LOG4 log_alfabeam: ALFABEAM 1 21.266261380986165 10.690963382061241 2008-Oct-21 19:43:46 LOG4 log_alfabeam: ALFABEAM 2 21.261117507140231 10.629141493259091 2008-Oct-21 19:43:46 LOG4 log_alfabeam: ALFABEAM 3 21.261471637253994 10.523112726218734 2008-Oct-21 19:43:46 LOG4 log_alfabeam: ALFABEAM 4 21.267103419074783 10.479025511442297 2008-Oct-21 19:43:46 LOG4 log_alfabeam: ALFABEAM 5 21.272272850912422 10.541704018720791 2008-Oct-21 19:43:46 LOG4 log_alfabeam: ALFABEAM 6 21.271784967195213 10.647604341654576 2008-Oct-21 19:43:46 INFO2 take_data: Starting WAPP+GALFA scan: 829500113 2008-Oct-21 19:43:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:43:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:43:47 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-21 19:43:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:43:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-21 19:43:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:43:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:43:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.532 (still bad) 2008-Oct-21 19:43:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85428.00 2008-Oct-21 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.152 (still bad) 2008-Oct-21 19:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.153 (still bad) 2008-Oct-21 19:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.153 (still bad) 2008-Oct-21 19:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.153 (still bad) 2008-Oct-21 19:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.155 (still bad) 2008-Oct-21 19:43:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:43:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:43:58 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-21 19:43:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:43:58 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-21 19:43:58 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-21 19:43:58 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-21 19:43:58 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-21 19:43:58 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:43:58 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:43:58 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:43:58 LOG2 antvel: Parameters to Doppler: Topocentric 85438 2008 295 0.0 2008-Oct-21 19:43:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:43:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-21 19:43:58 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-21 19:43:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:43:58 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:43:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-21 19:43:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:43:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:43:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:43:58 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-21 19:43:58 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.334734 2008.8099170405862 18.999933 2008-Oct-21 19:43:58 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666680 10.585000000000003 2008-Oct-21 19:43:58 LOG4 log_alfabeam: ALFABEAM 1 21.266305213423227 10.690997855136150 2008-Oct-21 19:43:58 LOG4 log_alfabeam: ALFABEAM 2 21.261135842301599 10.629639289983320 2008-Oct-21 19:43:58 LOG4 log_alfabeam: ALFABEAM 3 21.261446168996862 10.523580689733615 2008-Oct-21 19:43:58 LOG4 log_alfabeam: ALFABEAM 4 21.267059589565743 10.478988217748288 2008-Oct-21 19:43:58 LOG4 log_alfabeam: ALFABEAM 5 21.272254819334211 10.541200477953513 2008-Oct-21 19:43:58 LOG4 log_alfabeam: ALFABEAM 6 21.271810790729781 10.647142744942938 2008-Oct-21 19:43:58 INFO2 take_data: Starting WAPP+GALFA scan: 829500114 2008-Oct-21 19:43:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:43:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:43:59 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-21 19:43:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:43:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-21 19:43:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:43:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:43:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:43:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85440.00 2008-Oct-21 19:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.153 (still bad) 2008-Oct-21 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.148 (still bad) 2008-Oct-21 19:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.148 (still bad) 2008-Oct-21 19:44:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 19:44:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.003 1.006 1.110 2008-Oct-21 19:44:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 1.136 0.994 1.060 2008-Oct-21 19:44:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.149 1.033 0.984 1.045 2008-Oct-21 19:44:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.101 0.912 0.111 2008-Oct-21 19:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.148 (still bad) 2008-Oct-21 19:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.147 (still bad) 2008-Oct-21 19:44:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:44:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:44:10 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-21 19:44:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:44:10 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-21 19:44:10 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-21 19:44:10 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-21 19:44:10 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-21 19:44:10 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:44:10 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:44:10 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:44:10 LOG2 antvel: Parameters to Doppler: Topocentric 85450 2008 295 0.0 2008-Oct-21 19:44:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:44:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-21 19:44:10 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-21 19:44:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:44:10 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:44:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-21 19:44:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:44:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:44:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:44:10 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-21 19:44:10 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.338076 2008.8099174208432 18.999933 2008-Oct-21 19:44:10 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666680 10.585000000000003 2008-Oct-21 19:44:10 LOG4 log_alfabeam: ALFABEAM 1 21.266348982518178 10.691028338385722 2008-Oct-21 19:44:10 LOG4 log_alfabeam: ALFABEAM 2 21.261154349405171 10.630134553896539 2008-Oct-21 19:44:10 LOG4 log_alfabeam: ALFABEAM 3 21.261420939763205 10.524050098260101 2008-Oct-21 19:44:10 LOG4 log_alfabeam: ALFABEAM 4 21.267015821032633 10.478954921201375 2008-Oct-21 19:44:10 LOG4 log_alfabeam: ALFABEAM 5 21.272236610542457 10.540699423323856 2008-Oct-21 19:44:10 LOG4 log_alfabeam: ALFABEAM 6 21.271836379828382 10.646679626209126 2008-Oct-21 19:44:10 INFO2 take_data: Starting WAPP+GALFA scan: 829500115 2008-Oct-21 19:44:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:44:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:44:11 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-21 19:44:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:44:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-21 19:44:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:44:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:44:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:44:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85452.00 2008-Oct-21 19:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.148 (still bad) 2008-Oct-21 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2008-Oct-21 19:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.144 (still bad) 2008-Oct-21 19:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2008-Oct-21 19:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2008-Oct-21 19:44:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:44:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:44:22 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-21 19:44:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:44:22 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-21 19:44:22 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-21 19:44:22 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-21 19:44:22 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-21 19:44:22 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:44:22 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:44:22 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:44:22 LOG2 antvel: Parameters to Doppler: Topocentric 85462 2008 295 0.0 2008-Oct-21 19:44:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:44:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-21 19:44:22 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-21 19:44:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:44:22 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:44:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-21 19:44:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:44:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:44:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:44:22 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-21 19:44:22 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.341419 2008.8099178011003 18.999933 2008-Oct-21 19:44:22 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666719 10.585000000000003 2008-Oct-21 19:44:22 LOG4 log_alfabeam: ALFABEAM 1 21.266392709522229 10.691054864231344 2008-Oct-21 19:44:22 LOG4 log_alfabeam: ALFABEAM 2 21.261173036539937 10.630627533832367 2008-Oct-21 19:44:22 LOG4 log_alfabeam: ALFABEAM 3 21.261395936386833 10.524521169943672 2008-Oct-21 19:44:22 LOG4 log_alfabeam: ALFABEAM 4 21.266972092235022 10.478925588326637 2008-Oct-21 19:44:22 LOG4 log_alfabeam: ALFABEAM 5 21.272218216579024 10.540200604096684 2008-Oct-21 19:44:22 LOG4 log_alfabeam: ALFABEAM 6 21.271861747768259 10.646214769924878 2008-Oct-21 19:44:22 INFO2 take_data: Starting WAPP+GALFA scan: 829500116 2008-Oct-21 19:44:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:44:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:44:23 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-21 19:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.146 (still bad) 2008-Oct-21 19:44:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:44:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-21 19:44:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:44:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:44:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:44:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85464.00 2008-Oct-21 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.146 (still bad) 2008-Oct-21 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2008-Oct-21 19:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2008-Oct-21 19:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2008-Oct-21 19:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2008-Oct-21 19:44:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:44:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:44:34 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-21 19:44:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:44:34 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-21 19:44:34 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-21 19:44:34 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-21 19:44:34 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-21 19:44:34 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:44:34 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:44:34 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:44:34 LOG2 antvel: Parameters to Doppler: Topocentric 85474 2008 295 0.0 2008-Oct-21 19:44:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:44:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-21 19:44:34 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-21 19:44:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:44:34 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:44:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-21 19:44:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:44:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:44:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:44:34 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-21 19:44:34 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.344761 2008.8099181813573 18.999933 2008-Oct-21 19:44:34 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666715 10.585000000000001 2008-Oct-21 19:44:34 LOG4 log_alfabeam: ALFABEAM 1 21.266436363375728 10.691077432288180 2008-Oct-21 19:44:34 LOG4 log_alfabeam: ALFABEAM 2 21.261191889493968 10.631117888378592 2008-Oct-21 19:44:34 LOG4 log_alfabeam: ALFABEAM 3 21.261371175667865 10.524993559970239 2008-Oct-21 19:44:34 LOG4 log_alfabeam: ALFABEAM 4 21.266928434244804 10.478900221811260 2008-Oct-21 19:44:34 LOG4 log_alfabeam: ALFABEAM 5 21.272199651435869 10.539704366753474 2008-Oct-21 19:44:34 LOG4 log_alfabeam: ALFABEAM 6 21.271886877425086 10.645748516081746 2008-Oct-21 19:44:34 INFO2 take_data: Starting WAPP+GALFA scan: 829500117 2008-Oct-21 19:44:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:44:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:44:35 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-21 19:44:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:44:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-21 19:44:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:44:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:44:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2008-Oct-21 19:44:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85476.00 2008-Oct-21 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2008-Oct-21 19:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2008-Oct-21 19:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2008-Oct-21 19:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2008-Oct-21 19:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2008-Oct-21 19:44:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:44:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:44:46 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-21 19:44:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:44:46 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-21 19:44:46 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-21 19:44:46 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-21 19:44:46 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-21 19:44:46 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:44:46 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:44:46 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:44:46 LOG2 antvel: Parameters to Doppler: Topocentric 85486 2008 295 0.0 2008-Oct-21 19:44:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:44:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-21 19:44:46 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-21 19:44:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:44:46 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:44:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-21 19:44:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:44:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:44:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:44:46 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-21 19:44:46 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.348104 2008.8099185616145 18.999933 2008-Oct-21 19:44:46 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666680 10.585000000000003 2008-Oct-21 19:44:46 LOG4 log_alfabeam: ALFABEAM 1 21.266479965345688 10.691096072845598 2008-Oct-21 19:44:46 LOG4 log_alfabeam: ALFABEAM 2 21.261210916471594 10.631605865562079 2008-Oct-21 19:44:46 LOG4 log_alfabeam: ALFABEAM 3 21.261346644540634 10.525467487819972 2008-Oct-21 19:44:46 LOG4 log_alfabeam: ALFABEAM 4 21.266884825804755 10.478878790306714 2008-Oct-21 19:44:46 LOG4 log_alfabeam: ALFABEAM 5 21.272180907038845 10.539210461334337 2008-Oct-21 19:44:46 LOG4 log_alfabeam: ALFABEAM 6 21.271911781977956 10.645280647809894 2008-Oct-21 19:44:46 INFO2 take_data: Starting WAPP+GALFA scan: 829500118 2008-Oct-21 19:44:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:44:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:44:47 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-21 19:44:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:44:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-21 19:44:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:44:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:44:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:44:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85488.00 2008-Oct-21 19:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2008-Oct-21 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2008-Oct-21 19:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2008-Oct-21 19:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2008-Oct-21 19:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2008-Oct-21 19:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2008-Oct-21 19:44:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:44:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:44:58 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-21 19:44:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:44:58 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-21 19:44:58 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-21 19:44:58 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-21 19:44:58 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-21 19:44:58 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:44:58 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:44:58 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:44:58 LOG2 antvel: Parameters to Doppler: Topocentric 85498 2008 295 0.0 2008-Oct-21 19:44:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:44:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-21 19:44:58 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-21 19:44:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:44:58 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:44:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-21 19:44:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:44:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-21 19:44:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:44:58 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-21 19:44:58 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.351446 2008.8099189418715 18.999933 2008-Oct-21 19:44:58 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666698 10.585000000000008 2008-Oct-21 19:44:58 LOG4 log_alfabeam: ALFABEAM 1 21.266523484537444 10.691110792800703 2008-Oct-21 19:44:58 LOG4 log_alfabeam: ALFABEAM 2 21.261230102970156 10.632091129131068 2008-Oct-21 19:44:58 LOG4 log_alfabeam: ALFABEAM 3 21.261322359342394 10.525942606598399 2008-Oct-21 19:44:58 LOG4 log_alfabeam: ALFABEAM 4 21.266841297826815 10.478861289193274 2008-Oct-21 19:44:58 LOG4 log_alfabeam: ALFABEAM 5 21.272161997682275 10.538719229234381 2008-Oct-21 19:44:58 LOG4 log_alfabeam: ALFABEAM 6 21.271936444757596 10.644811507360386 2008-Oct-21 19:44:58 INFO2 take_data: Starting WAPP+GALFA scan: 829500119 2008-Oct-21 19:44:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:44:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:44:59 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-21 19:44:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:44:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-21 19:44:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:44:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:44:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:44:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85500.00 2008-Oct-21 19:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2008-Oct-21 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2008-Oct-21 19:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2008-Oct-21 19:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-21 19:45:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:45:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 0.972 0.968 1.084 2008-Oct-21 19:45:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 1.111 0.946 1.042 2008-Oct-21 19:45:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 1.012 0.923 1.013 2008-Oct-21 19:45:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.100 0.893 0.111 2008-Oct-21 19:45:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:45:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:45:10 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-21 19:45:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:45:10 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-21 19:45:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-21 19:45:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-21 19:45:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-21 19:45:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 19:45:10 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-21 19:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2008-Oct-21 19:45:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 19:45:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-21 19:45:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 19:45:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 19:45:10 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-21 19:45:10 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-21 19:45:10 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-21 19:45:10 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-21 19:45:10 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:45:10 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:45:10 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:45:10 LOG2 antvel: Parameters to Doppler: Topocentric 85510 2008 295 0.0 2008-Oct-21 19:45:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:45:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-21 19:45:10 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-21 19:45:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:45:10 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:45:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-21 19:45:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:45:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:45:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:45:10 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-21 19:45:10 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.354789 2008.8099193221285 18.999933 2008-Oct-21 19:45:10 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666680 10.585000000000003 2008-Oct-21 19:45:10 LOG4 log_alfabeam: ALFABEAM 1 21.266566942232281 10.691121620270250 2008-Oct-21 19:45:10 LOG4 log_alfabeam: ALFABEAM 2 21.261249457310637 10.632573926268920 2008-Oct-21 19:45:10 LOG4 log_alfabeam: ALFABEAM 3 21.261298307110952 10.526419137124456 2008-Oct-21 19:45:10 LOG4 log_alfabeam: ALFABEAM 4 21.266797829038538 10.478847689289141 2008-Oct-21 19:45:10 LOG4 log_alfabeam: ALFABEAM 5 21.272142915174530 10.538230421304178 2008-Oct-21 19:45:10 LOG4 log_alfabeam: ALFABEAM 6 21.271960878842215 10.644340876516917 2008-Oct-21 19:45:10 INFO2 take_data: Starting WAPP+GALFA scan: 829500120 2008-Oct-21 19:45:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:45:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:45:11 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-21 19:45:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:45:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-21 19:45:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:45:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:45:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:45:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85512.00 2008-Oct-21 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.599 (still bad) 2008-Oct-21 19:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.599 (still bad) 2008-Oct-21 19:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.598 (still bad) 2008-Oct-21 19:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.599 (still bad) 2008-Oct-21 19:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.600 (still bad) 2008-Oct-21 19:45:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:45:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:45:22 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-21 19:45:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:45:22 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-21 19:45:22 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-21 19:45:22 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-21 19:45:22 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-21 19:45:22 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:45:22 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:45:22 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:45:22 LOG2 antvel: Parameters to Doppler: Topocentric 85522 2008 295 0.0 2008-Oct-21 19:45:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:45:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-21 19:45:22 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-21 19:45:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:45:22 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:45:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-21 19:45:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:45:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:45:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:45:22 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-21 19:45:22 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.358131 2008.8099197023855 18.999933 2008-Oct-21 19:45:22 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666680 10.585000000000001 2008-Oct-21 19:45:22 LOG4 log_alfabeam: ALFABEAM 1 21.266610307721692 10.691128569305270 2008-Oct-21 19:45:22 LOG4 log_alfabeam: ALFABEAM 2 21.261268964715903 10.633053926057594 2008-Oct-21 19:45:22 LOG4 log_alfabeam: ALFABEAM 3 21.261274503715935 10.526896730729653 2008-Oct-21 19:45:22 LOG4 log_alfabeam: ALFABEAM 4 21.266754450170559 10.478837978792617 2008-Oct-21 19:45:22 LOG4 log_alfabeam: ALFABEAM 5 21.272123674096466 10.537744373670190 2008-Oct-21 19:45:22 LOG4 log_alfabeam: ALFABEAM 6 21.271985068022918 10.643869099487931 2008-Oct-21 19:45:22 INFO2 take_data: Starting WAPP+GALFA scan: 829500121 2008-Oct-21 19:45:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:45:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:45:23 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-21 19:45:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:45:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-21 19:45:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:45:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:45:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:45:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85524.00 2008-Oct-21 19:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.599 (still bad) 2008-Oct-21 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.593 (still bad) 2008-Oct-21 19:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.591 (still bad) 2008-Oct-21 19:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.594 (still bad) 2008-Oct-21 19:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.590 (still bad) 2008-Oct-21 19:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.591 (still bad) 2008-Oct-21 19:45:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:45:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:45:34 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-21 19:45:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:45:34 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-21 19:45:34 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-21 19:45:34 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-21 19:45:34 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-21 19:45:34 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:45:34 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:45:34 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:45:34 LOG2 antvel: Parameters to Doppler: Topocentric 85534 2008 295 0.0 2008-Oct-21 19:45:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:45:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-21 19:45:34 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-21 19:45:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:45:34 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:45:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-21 19:45:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:45:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:45:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:45:34 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-21 19:45:34 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.361474 2008.8099200826427 18.999933 2008-Oct-21 19:45:34 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666673 10.585000000000008 2008-Oct-21 19:45:34 LOG4 log_alfabeam: ALFABEAM 1 21.266653602299360 10.691131665807342 2008-Oct-21 19:45:34 LOG4 log_alfabeam: ALFABEAM 2 21.261288633624673 10.633531374796101 2008-Oct-21 19:45:34 LOG4 log_alfabeam: ALFABEAM 3 21.261250936301725 10.527375609573644 2008-Oct-21 19:45:34 LOG4 log_alfabeam: ALFABEAM 4 21.266711139937055 10.478832130731313 2008-Oct-21 19:45:34 LOG4 log_alfabeam: ALFABEAM 5 21.272104266137539 10.537260838033072 2008-Oct-21 19:45:34 LOG4 log_alfabeam: ALFABEAM 6 21.272009025273817 10.643395956708032 2008-Oct-21 19:45:34 INFO2 take_data: Starting WAPP+GALFA scan: 829500122 2008-Oct-21 19:45:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:45:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:45:35 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-21 19:45:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:45:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-21 19:45:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:45:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:45:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:45:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85536.00 2008-Oct-21 19:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.592 (still bad) 2008-Oct-21 19:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.588 (still bad) 2008-Oct-21 19:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.586 (still bad) 2008-Oct-21 19:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.585 (still bad) 2008-Oct-21 19:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.585 (still bad) 2008-Oct-21 19:45:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:45:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:45:46 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-21 19:45:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:45:46 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-21 19:45:46 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-21 19:45:46 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-21 19:45:46 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-21 19:45:46 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:45:46 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:45:46 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:45:46 LOG2 antvel: Parameters to Doppler: Topocentric 85546 2008 295 0.0 2008-Oct-21 19:45:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:45:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-21 19:45:46 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-21 19:45:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:45:46 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:45:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-21 19:45:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:45:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:45:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:45:46 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-21 19:45:46 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.364816 2008.8099204628998 18.999933 2008-Oct-21 19:45:46 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666659 10.585000000000001 2008-Oct-21 19:45:46 LOG4 log_alfabeam: ALFABEAM 1 21.266696795463297 10.691130930839558 2008-Oct-21 19:45:46 LOG4 log_alfabeam: ALFABEAM 2 21.261308449001934 10.634005947058409 2008-Oct-21 19:45:46 LOG4 log_alfabeam: ALFABEAM 3 21.261227620266393 10.527855423518687 2008-Oct-21 19:45:46 LOG4 log_alfabeam: ALFABEAM 4 21.266667928866664 10.478830126260291 2008-Oct-21 19:45:46 LOG4 log_alfabeam: ALFABEAM 5 21.272084706148483 10.536780145083133 2008-Oct-21 19:45:46 LOG4 log_alfabeam: ALFABEAM 6 21.272032734850768 10.642921794041470 2008-Oct-21 19:45:46 INFO2 take_data: Starting WAPP+GALFA scan: 829500123 2008-Oct-21 19:45:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:45:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:45:47 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-21 19:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.583 (still bad) 2008-Oct-21 19:45:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:45:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-21 19:45:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:45:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:45:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:45:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85548.00 2008-Oct-21 19:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.582 (still bad) 2008-Oct-21 19:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.569 (still bad) 2008-Oct-21 19:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.569 (still bad) 2008-Oct-21 19:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.568 (still bad) 2008-Oct-21 19:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.568 (still bad) 2008-Oct-21 19:45:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:45:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:45:58 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-21 19:45:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:45:58 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-21 19:45:58 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-21 19:45:58 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-21 19:45:58 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-21 19:45:58 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:45:58 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:45:58 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:45:58 LOG2 antvel: Parameters to Doppler: Topocentric 85558 2008 295 0.0 2008-Oct-21 19:45:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:45:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-21 19:45:58 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-21 19:45:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:45:58 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:45:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-21 19:45:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:45:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:45:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:45:58 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-21 19:45:58 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.368159 2008.8099208431568 18.999933 2008-Oct-21 19:45:58 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666673 10.585000000000003 2008-Oct-21 19:45:58 LOG4 log_alfabeam: ALFABEAM 1 21.266739908517629 10.691126388044005 2008-Oct-21 19:45:58 LOG4 log_alfabeam: ALFABEAM 2 21.261328419405434 10.634477888213873 2008-Oct-21 19:45:58 LOG4 log_alfabeam: ALFABEAM 3 21.261204542864860 10.528336396064271 2008-Oct-21 19:45:58 LOG4 log_alfabeam: ALFABEAM 4 21.266624795662519 10.478831940660713 2008-Oct-21 19:45:58 LOG4 log_alfabeam: ALFABEAM 5 21.272064985698794 10.536302047414996 2008-Oct-21 19:45:58 LOG4 log_alfabeam: ALFABEAM 6 21.272056209620565 10.642446390573527 2008-Oct-21 19:45:58 INFO2 take_data: Starting WAPP+GALFA scan: 829500124 2008-Oct-21 19:45:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:45:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:45:59 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-21 19:45:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:45:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-21 19:45:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:45:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:45:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.567 (still bad) 2008-Oct-21 19:45:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85560.00 2008-Oct-21 19:46:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:46:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:46:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:46:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:46:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:46:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:46:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:46:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:46:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.567 (still bad) 2008-Oct-21 19:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.542 (still bad) 2008-Oct-21 19:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.543 (still bad) 2008-Oct-21 19:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.543 (still bad) 2008-Oct-21 19:46:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:46:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.453 1.326 1.327 1.483 2008-Oct-21 19:46:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.238 1.541 1.321 1.425 2008-Oct-21 19:46:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.541 1.410 1.301 1.356 2008-Oct-21 19:46:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.413 0.100 1.243 0.111 2008-Oct-21 19:46:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:46:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:46:10 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-21 19:46:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:46:10 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-21 19:46:10 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-21 19:46:10 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-21 19:46:10 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-21 19:46:10 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:46:10 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:46:10 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:46:10 LOG2 antvel: Parameters to Doppler: Topocentric 85570 2008 295 0.0 2008-Oct-21 19:46:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:46:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-21 19:46:10 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-21 19:46:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:46:10 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:46:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-21 19:46:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:46:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:46:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:46:10 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-21 19:46:10 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.371501 2008.8099212234138 18.999933 2008-Oct-21 19:46:10 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666655 10.585000000000003 2008-Oct-21 19:46:10 LOG4 log_alfabeam: ALFABEAM 1 21.266782911186315 10.691118065341460 2008-Oct-21 19:46:10 LOG4 log_alfabeam: ALFABEAM 2 21.261348529559008 10.634946878471785 2008-Oct-21 19:46:10 LOG4 log_alfabeam: ALFABEAM 3 21.261181719020954 10.528818175905801 2008-Oct-21 19:46:10 LOG4 log_alfabeam: ALFABEAM 4 21.266581770631486 10.478837548196385 2008-Oct-21 19:46:10 LOG4 log_alfabeam: ALFABEAM 5 21.272045119892262 10.535826870130716 2008-Oct-21 19:46:10 LOG4 log_alfabeam: ALFABEAM 6 21.272079434306953 10.641970093524986 2008-Oct-21 19:46:10 INFO2 take_data: Starting WAPP+GALFA scan: 829500125 2008-Oct-21 19:46:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:46:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:46:11 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-21 19:46:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:46:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-21 19:46:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:46:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:46:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:46:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85572.00 2008-Oct-21 19:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.544 (still bad) 2008-Oct-21 19:46:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:46:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:46:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:46:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:46:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:46:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:46:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:46:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:46:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.544 (still bad) 2008-Oct-21 19:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.538 (still bad) 2008-Oct-21 19:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.537 (still bad) 2008-Oct-21 19:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.536 (still bad) 2008-Oct-21 19:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.537 (still bad) 2008-Oct-21 19:46:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:46:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:46:22 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-21 19:46:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:46:22 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-21 19:46:22 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-21 19:46:22 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-21 19:46:22 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-21 19:46:22 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:46:22 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:46:22 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:46:22 LOG2 antvel: Parameters to Doppler: Topocentric 85582 2008 295 0.0 2008-Oct-21 19:46:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:46:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-21 19:46:22 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-21 19:46:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:46:22 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:46:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-21 19:46:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:46:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-21 19:46:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-21 19:46:22 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-21 19:46:22 LOG5 log_alfabeam: Parameters: 21.266666666666666 10.585000000000001 21.374843 2008.8099216036708 18.999933 2008-Oct-21 19:46:22 LOG4 log_alfabeam: ALFABEAM 0 21.266666666666659 10.585000000000003 2008-Oct-21 19:46:22 LOG4 log_alfabeam: ALFABEAM 1 21.266825811960064 10.691105988241869 2008-Oct-21 19:46:22 LOG4 log_alfabeam: ALFABEAM 2 21.261368782059652 10.635413023171150 2008-Oct-21 19:46:22 LOG4 log_alfabeam: ALFABEAM 3 21.261159142821757 10.529300843327460 2008-Oct-21 19:46:22 LOG4 log_alfabeam: ALFABEAM 4 21.266538845296900 10.478846923081163 2008-Oct-21 19:46:22 LOG4 log_alfabeam: ALFABEAM 5 21.272025106187488 10.535354507683264 2008-Oct-21 19:46:22 LOG4 log_alfabeam: ALFABEAM 6 21.272102414826048 10.641492823583315 2008-Oct-21 19:46:22 INFO2 take_data: Starting WAPP+GALFA scan: 829500126 2008-Oct-21 19:46:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-21 19:46:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-21 19:46:23 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-21 19:46:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:46:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-21 19:46:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:46:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:46:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:46:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85584.00 2008-Oct-21 19:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.538 (still bad) 2008-Oct-21 19:46:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:46:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:46:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:46:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:46:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:46:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:46:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:46:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:46:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.533 (still bad) 2008-Oct-21 19:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.534 (still bad) 2008-Oct-21 19:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.531 (still bad) 2008-Oct-21 19:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.533 (still bad) 2008-Oct-21 19:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.530 (still bad) 2008-Oct-21 19:46:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:46:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-21 19:46:34 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-21 19:46:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-21 19:46:34 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-21 19:46:34 INFO2 smartfreq: Switching off CAL 2008-Oct-21 19:46:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-21 19:46:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-21 19:46:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 19:46:34 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-21 19:46:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 19:46:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-21 19:46:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 19:46:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 19:46:34 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-21 19:46:34 INFO3 restore_frequencies: Restoring original frequencies 2008-Oct-21 19:46:34 LOG5 antvel: Calling 'antvel 211600.000000 103506.000000 J 0' 2008-Oct-21 19:46:34 LOG2 antvel: Precessing RA = 21:16:00.0 Dec = +10:35:06.0 Epoch = 2008.80992 J 2008-Oct-21 19:46:34 LOG2 antvel: Computed apparent RA = 21:16:26.6 Dec = +10:37:28.6 2008-Oct-21 19:46:34 LOG2 antvel: Parameters to Doppler: Topocentric 85594 2008 295 0.0 2008-Oct-21 19:46:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:46:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-21 19:46:34 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-21 19:46:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:46:34 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:46:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-21 19:46:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:46:34 STOP finish_task: Finishing task 'smart frequency switching' 2008-Oct-21 19:46:34 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-21 19:46:34 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Oct-21 19:46:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:46:34 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Oct-21 19:46:34 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-21 19:46:35 NOTE run_command_file: DONE with command file processing 2008-Oct-21 19:46:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Oct-21 19:46:35 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Oct-21 19:46:35 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-21 19:46:35 DONE finish_task: DONE finished running: command file 'command_galfasrc' 2008-Oct-21 19:46:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:46:35 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'OK' 2008-Oct-21 19:46:35 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-21 19:46:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-21 19:46:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:46:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:46:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.530 (still bad) 2008-Oct-21 19:46:45 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-21 19:46:45 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-21 19:46:45 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-21 19:46:45 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-21 19:46:45 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-21 19:46:45 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-21 19:46:45 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-21 19:46:45 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-21 19:46:45 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-21 19:46:45 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-21 19:46:45 LOG3 exec_msg: Closing socket 2008-Oct-21 19:46:45 LOG3 exec_msg: Closing socket 2008-Oct-21 19:46:45 LOG3 exec_msg: Closing socket 2008-Oct-21 19:46:45 LOG3 exec_msg: Closing socket 2008-Oct-21 19:46:47 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-21 19:46:47 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-21 19:46:48 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-21 19:46:48 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-21 19:47:00 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-21 19:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-21 19:47:02 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-21 19:47:02 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-21 19:47:02 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-21 19:47:02 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-21 19:47:02 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-21 19:47:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-21 19:47:02 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-21 19:47:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 19:47:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-21 19:47:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 19:47:03 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-21 19:47:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 19:47:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 19:47:03 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-21 19:47:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 19:47:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-21 19:47:03 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-21 19:47:03 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-21 19:47:03 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-21 19:47:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-21 19:47:03 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-21 19:47:03 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-21 19:47:03 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-21 19:47:03 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-21 19:47:03 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-21 19:47:03 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-21 19:47:03 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-21 19:47:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-21 19:47:03 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-21 19:47:03 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-21 19:47:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-21 19:47:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:47:03 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-21 19:47:03 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-21 19:47:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-21 19:47:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-21 19:47:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:47:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:47:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:47:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:47:03 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-21 19:47:03 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-21 19:47:03 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-21 19:47:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-21 19:47:03 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-21 19:47:03 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-21 19:47:03 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-21 19:47:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:47:03 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-21 19:47:03 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-21 19:47:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:47:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-21 19:47:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-21 19:47:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-21 19:47:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-21 19:47:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-21 19:47:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-21 19:47:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-21 19:47:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-21 19:47:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-21 19:47:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-21 19:47:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-21 19:47:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-21 19:47:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-21 19:47:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-21 19:47:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-21 19:47:04 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-21 19:47:04 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-21 19:47:04 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-21 19:47:04 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-21 19:47:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-21 19:47:04 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-21 19:47:04 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-21 19:47:04 START begin_task: Starting task 'selecting calibration port' 2008-Oct-21 19:47:04 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-21 19:47:04 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-21 19:47:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-21 19:47:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:47:04 START begin_task: Starting task 'waiting on calport' 2008-Oct-21 19:47:04 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-21 19:47:04 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-21 19:47:04 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-21 19:47:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:47:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:47:04 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 19:47:04 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-21 19:47:04 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-21 19:47:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-21 19:47:04 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-21 19:47:04 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-21 19:47:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-21 19:47:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-21 19:47:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 19:47:04 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-21 19:47:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:47:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 19:47:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-21 19:47:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 19:47:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 19:47:04 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-21 19:47:04 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-21 19:47:04 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-21 19:47:04 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-21 19:47:04 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-21 19:47:04 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-21 19:47:04 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-21 19:47:04 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-21 19:47:04 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-21 19:47:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA + KS 2008-Oct-21 19:47:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA + KS 2008-Oct-21 19:47:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA + KS 2008-Oct-21 19:47:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA + KS 2008-Oct-21 19:47:05 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-21 19:47:05 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-21 19:47:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 19:47:05 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-21 19:47:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-21 19:47:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-21 19:47:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 19:47:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA + KS' 2008-Oct-21 19:47:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-21 19:47:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 19:47:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 19:47:05 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-21 19:47:05 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-21 19:47:05 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-21 19:47:05 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-21 19:47:05 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-21 19:47:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:47:05 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-21 19:47:05 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-21 19:47:05 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-21 19:47:05 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-21 19:47:05 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-21 19:47:05 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-21 19:47:05 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-21 19:47:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-21 19:47:05 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-21 19:47:05 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-21 19:47:05 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-21 19:47:05 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-21 19:47:05 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-21 19:47:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:47:05 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-21 19:47:05 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-21 19:47:06 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-21 19:47:06 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-21 19:47:06 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-21 19:47:20 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-21 19:47:20 LOG4 exec_msg: From OBSERVER: track_new_source drift44p1 212300.0 +103506 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-21 19:47:20 LOG1 track_new_source: Calling 'track_new_source drift44p1 212300.0 +103506 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-21 19:47:20 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-21 19:47:20 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-21 19:47:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift44p1} INFO {Selecting source 'drift44p1' ...} 2008-Oct-21 19:47:20 LOG3 track_source: Calling 'track_source drift44p1 212300.0 +103506 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-21 19:47:20 START begin_task: Starting task 'sending tracking commands' 2008-Oct-21 19:47:20 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-21 19:47:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift44p1} INFO {Slewing to source 'drift44p1' ...} 2008-Oct-21 19:47:20 INFO1 track_source: Starting to track drift44p1 2008-Oct-21 19:47:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift44p1" 2008-Oct-21 19:47:20 LOG3 vw_send: To DATATAKING: set ra 212300.0 2008-Oct-21 19:47:20 LOG3 vw_send: To DATATAKING: set dec +103506 2008-Oct-21 19:47:20 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-21 19:47:20 LOG3 vw_send: To DATATAKING: pnt tr 212300.0 +103506 -CJ 2008-Oct-21 19:47:20 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-21 19:47:20 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-21 19:47:20 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-21 19:47:20 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-21 19:47:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:47:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-21 19:47:20 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-21 19:47:20 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-21 19:47:20 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-21 19:47:20 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-21 19:47:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-21 19:47:20 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-21 19:47:20 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-21 19:47:20 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-21 19:47:20 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-21 19:47:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:47:20 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-21 19:47:20 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-21 19:47:20 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-21 19:47:20 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-21 19:47:20 DONE finish_task: DONE finished selecting: new source 2008-Oct-21 19:47:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:47:20 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-21 19:47:20 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift44p1" 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: set ra 212300.0 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: set dec +103506 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: 212300.0 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: +103506 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: pnt tr 212300.0 +103506 -CJ 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-21 19:47:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-21 19:47:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-21 19:47:57 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-21 19:47:57 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-21 19:47:57 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-21 19:47:57 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-21 19:47:57 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-21 19:47:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-21 19:47:57 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-21 19:47:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 19:47:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-21 19:47:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 19:47:57 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-21 19:47:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 19:47:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 19:47:57 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-21 19:47:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 19:47:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-21 19:47:57 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-21 19:47:57 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-21 19:47:57 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-21 19:47:57 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-21 19:47:57 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-21 19:47:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-21 19:47:58 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-21 19:47:58 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-21 19:47:58 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-21 19:47:58 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-21 19:47:58 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-21 19:47:58 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-21 19:47:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-21 19:47:58 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-21 19:47:58 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-21 19:47:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-21 19:47:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:47:58 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-21 19:47:58 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-21 19:47:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-21 19:47:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:47:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:47:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-21 19:47:58 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 19:47:58 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-21 19:47:58 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-21 19:47:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-21 19:47:58 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-21 19:47:58 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-21 19:47:58 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-21 19:47:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:47:58 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-21 19:47:58 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-21 19:47:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-21 19:48:04 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-21 19:48:04 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-21 19:48:04 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-21 19:48:04 LOG5 begin_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-21 19:48:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-21 19:48:04 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-21 19:48:04 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-21 19:48:04 START begin_task: Starting task 'selecting calibration port' 2008-Oct-21 19:48:04 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-21 19:48:04 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-21 19:48:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-21 19:48:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:48:04 START begin_task: Starting task 'waiting on calport' 2008-Oct-21 19:48:04 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-21 19:48:05 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-21 19:48:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:48:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:48:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 19:48:05 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-21 19:48:05 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-21 19:48:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-21 19:48:05 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-21 19:48:05 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-21 19:48:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-21 19:48:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-21 19:48:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 19:48:05 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-21 19:48:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:48:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 19:48:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-21 19:48:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 19:48:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 19:48:05 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-21 19:48:05 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-21 19:48:05 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-21 19:48:05 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-21 19:48:05 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-21 19:48:05 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-21 19:48:05 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-21 19:48:05 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-21 19:48:05 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-21 19:48:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA + KS 2008-Oct-21 19:48:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA + KS 2008-Oct-21 19:48:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA + KS 2008-Oct-21 19:48:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA + KS 2008-Oct-21 19:48:05 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-21 19:48:05 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-21 19:48:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 19:48:05 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-21 19:48:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-21 19:48:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-21 19:48:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 19:48:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA + KS' 2008-Oct-21 19:48:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-21 19:48:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 19:48:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 19:48:05 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-21 19:48:05 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-21 19:48:05 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-21 19:48:05 LOG5 finish_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-21 19:48:05 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-21 19:48:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:48:05 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-21 19:48:05 LOG5 end_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-21 19:48:06 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-21 19:48:13 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-21 19:48:13 LOG4 exec_msg: From OBSERVER: track_new_source drift44p1 212300.0 +103506 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-21 19:48:13 LOG1 track_new_source: Calling 'track_new_source drift44p1 212300.0 +103506 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-21 19:48:13 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-21 19:48:13 LOG5 begin_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-21 19:48:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift44p1} INFO {Selecting source 'drift44p1' ...} 2008-Oct-21 19:48:13 LOG3 track_source: Calling 'track_source drift44p1 212300.0 +103506 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-21 19:48:13 START begin_task: Starting task 'sending tracking commands' 2008-Oct-21 19:48:13 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-21 19:48:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift44p1} INFO {Slewing to source 'drift44p1' ...} 2008-Oct-21 19:48:13 INFO1 track_source: Starting to track drift44p1 2008-Oct-21 19:48:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift44p1" 2008-Oct-21 19:48:13 LOG3 vw_send: To DATATAKING: set ra 212300.0 2008-Oct-21 19:48:13 LOG3 vw_send: To DATATAKING: set dec +103506 2008-Oct-21 19:48:13 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-21 19:48:13 LOG3 vw_send: To DATATAKING: pnt tr 212300.0 +103506 -CJ 2008-Oct-21 19:48:13 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-21 19:48:13 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-21 19:48:13 LOG5 finish_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-21 19:48:13 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-21 19:48:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:48:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-21 19:48:13 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-21 19:48:13 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-21 19:48:13 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-21 19:48:13 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-21 19:48:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-21 19:48:13 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-21 19:48:13 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-21 19:48:13 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-21 19:48:13 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-21 19:48:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:48:13 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-21 19:48:13 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-21 19:48:14 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-21 19:48:14 LOG5 finish_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-21 19:48:14 DONE finish_task: DONE finished selecting: new source 2008-Oct-21 19:48:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:48:14 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-21 19:48:14 LOG5 end_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-21 19:48:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift44p1" 2008-Oct-21 19:48:14 LOG4 got_cormsg: From DATATAKING: set ra 212300.0 2008-Oct-21 19:48:14 LOG4 got_cormsg: From DATATAKING: set dec +103506 2008-Oct-21 19:48:14 LOG4 got_cormsg: From DATATAKING: vw% 212300.0 2008-Oct-21 19:48:14 LOG4 got_cormsg: From DATATAKING: vw% +103506 2008-Oct-21 19:48:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:48:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-21 19:48:14 LOG4 got_cormsg: From DATATAKING: pnt tr 212300.0 +103506 -CJ 2008-Oct-21 19:48:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-21 19:48:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-21 19:48:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:48:14 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-21 19:48:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:48:21 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-21 19:48:21 LOG4 exec_msg: From OBSERVER: track_new_source drift44p1 212300.0 +103506 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-21 19:48:21 LOG1 track_new_source: Calling 'track_new_source drift44p1 212300.0 +103506 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-21 19:48:21 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-21 19:48:21 LOG5 begin_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-21 19:48:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift44p1} INFO {Selecting source 'drift44p1' ...} 2008-Oct-21 19:48:21 LOG3 track_source: Calling 'track_source drift44p1 212300.0 +103506 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-21 19:48:21 START begin_task: Starting task 'sending tracking commands' 2008-Oct-21 19:48:21 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-21 19:48:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift44p1} INFO {Slewing to source 'drift44p1' ...} 2008-Oct-21 19:48:21 INFO1 track_source: Starting to track drift44p1 2008-Oct-21 19:48:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift44p1" 2008-Oct-21 19:48:21 LOG3 vw_send: To DATATAKING: set ra 212300.0 2008-Oct-21 19:48:21 LOG3 vw_send: To DATATAKING: set dec +103506 2008-Oct-21 19:48:21 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-21 19:48:21 LOG3 vw_send: To DATATAKING: pnt tr 212300.0 +103506 -CJ 2008-Oct-21 19:48:21 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-21 19:48:21 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-21 19:48:21 LOG5 finish_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-21 19:48:21 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-21 19:48:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:48:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-21 19:48:21 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-21 19:48:21 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-21 19:48:21 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-21 19:48:21 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-21 19:48:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-21 19:48:21 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-21 19:48:21 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-21 19:48:21 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-21 19:48:21 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-21 19:48:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:48:21 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-21 19:48:21 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-21 19:48:21 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-21 19:48:21 LOG5 finish_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-21 19:48:21 DONE finish_task: DONE finished selecting: new source 2008-Oct-21 19:48:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:48:21 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-21 19:48:21 LOG5 end_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-21 19:48:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift44p1" 2008-Oct-21 19:48:21 LOG4 got_cormsg: From DATATAKING: set ra 212300.0 2008-Oct-21 19:48:21 LOG4 got_cormsg: From DATATAKING: set dec +103506 2008-Oct-21 19:48:21 LOG4 got_cormsg: From DATATAKING: vw% 212300.0 2008-Oct-21 19:48:21 LOG4 got_cormsg: From DATATAKING: vw% +103506 2008-Oct-21 19:48:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:48:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-21 19:48:21 LOG4 got_cormsg: From DATATAKING: pnt tr 212300.0 +103506 -CJ 2008-Oct-21 19:48:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-21 19:48:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-21 19:48:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:48:21 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-21 19:48:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:48:29 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-21 19:48:29 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-21 19:48:29 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-21 19:48:29 LOG5 begin_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-21 19:48:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-21 19:48:29 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-21 19:48:29 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-21 19:48:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-21 19:48:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:48:29 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-21 19:48:29 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-21 19:48:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-21 19:48:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:48:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:48:32 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 19:48:32 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-21 19:48:32 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-21 19:48:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-21 19:48:32 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-21 19:48:32 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-21 19:48:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-21 19:48:32 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-21 19:48:32 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-21 19:48:32 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-21 19:48:32 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-21 19:48:32 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-21 19:48:32 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-21 19:48:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:48:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-21 19:48:33 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 5 dB 2008-Oct-21 19:48:33 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 5 4 dB 2008-Oct-21 19:48:33 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 3 2 dB 2008-Oct-21 19:48:33 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Oct-21 19:48:33 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-21 19:48:33 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-21 19:48:33 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-21 19:48:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.057 0.984 ALFA beam 1: 0.967 1.097 2008-Oct-21 19:48:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.901 1.104 ALFA beam 3: 0.943 1.019 2008-Oct-21 19:48:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.099 1.000 ALFA beam 5: 0.979 1.073 2008-Oct-21 19:48:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.997 0.098 ALFA beam 7: 0.882 0.108 2008-Oct-21 19:48:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-21 19:48:33 LOG5 finish_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-21 19:48:33 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Oct-21 19:48:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:48:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-21 19:48:33 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-21 19:48:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-21 19:48:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-21 19:48:33 LOG5 finish_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-21 19:48:33 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-21 19:48:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-21 19:48:33 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-21 19:48:33 LOG5 end_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-21 19:48:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Oct-21 19:48:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.984 0.967 1.097 2008-Oct-21 19:48:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.104 0.943 1.019 2008-Oct-21 19:48:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 1.000 0.979 1.073 2008-Oct-21 19:48:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.098 0.882 0.108 2008-Oct-21 19:48:38 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Oct-21 19:48:38 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift44p1 212300.0 +103506 J 0 Topocentric velocity(optical) 2008-Oct-21 19:48:38 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift44p1 212300.0 +103506 J 0 Topocentric velocity(optical)' 2008-Oct-21 19:48:38 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Oct-21 19:48:38 LOG5 begin_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-21 19:48:38 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift44p1' 2008-Oct-21 19:48:38 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Oct-21 19:48:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift44p1} 2008-Oct-21 19:48:38 INFO5 fixed_driftmap: Start: year = 2008.8099258815628 RA = 21:23:26.7 Dec = +10:37:32.3 2008-Oct-21 19:48:38 NOTE fixed_driftmap: Setting ZA to 7:43:41.4 ... 2008-Oct-21 19:48:38 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 7.73 2008-Oct-21 19:48:38 LOG3 track_source: Calling 'track_source drift44p1 360.0 7.7281769724 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Oct-21 19:48:38 START begin_task: Starting task 'sending tracking commands' 2008-Oct-21 19:48:38 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-21 19:48:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift44p1} INFO {Slewing to source 'drift44p1' ...} 2008-Oct-21 19:48:38 INFO1 track_source: Starting to track drift44p1 2008-Oct-21 19:48:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift44p1" 2008-Oct-21 19:48:38 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Oct-21 19:48:38 LOG3 vw_send: To DATATAKING: set dec 7.7281769724 2008-Oct-21 19:48:38 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-21 19:48:38 LOG3 vw_send: To DATATAKING: pnt tr 360.0 7.7281769724 -CF 2008-Oct-21 19:48:38 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-21 19:48:38 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-21 19:48:38 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-21 19:48:38 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-21 19:48:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:48:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-21 19:48:38 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-21 19:48:38 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-21 19:48:38 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-21 19:48:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-21 19:48:38 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-21 19:48:38 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Oct-21 19:48:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-21 19:48:38 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-21 19:48:38 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-21 19:48:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift44p1" 2008-Oct-21 19:48:38 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Oct-21 19:48:38 LOG4 got_cormsg: From DATATAKING: set dec 7.7281769724 2008-Oct-21 19:48:38 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Oct-21 19:48:38 LOG4 got_cormsg: From DATATAKING: vw% 7.7281769724 2008-Oct-21 19:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:48:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-21 19:48:38 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 7.7281769724 -CF 2008-Oct-21 19:48:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-21 19:48:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-21 19:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:48:39 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-21 19:48:39 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-21 19:48:39 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-21 19:48:39 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-21 19:48:39 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-21 19:48:39 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-21 19:48:39 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-21 19:48:39 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-21 19:48:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:48:39 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-21 19:48:39 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-21 19:48:39 START begin_task: Starting task 'waiting on telescope' 2008-Oct-21 19:48:39 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-21 19:48:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-21 19:48:39 LOG3 waittrk: Start waittrk 5 2008-Oct-21 19:48:39 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-21 19:48:39 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-21 19:48:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-21 19:48:44 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-21 19:48:44 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-21 19:48:44 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-21 19:49:01 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-21 19:49:01 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-21 19:49:01 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-21 19:49:01 INFO2 waittrk: Now tracking drift44p1 2008-Oct-21 19:49:01 LOG4 waittrk: Current telescope position: Az = 359.62 ZA = 7.69 2008-Oct-21 19:49:01 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-21 19:49:01 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-21 19:49:01 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Oct-21 19:49:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:49:01 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-21 19:49:01 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-21 19:49:01 START begin_task: Starting task 'selecting calibration type' 2008-Oct-21 19:49:01 LOG5 begin_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-21 19:49:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-21 19:49:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-21 19:49:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:49:01 START begin_task: Starting task 'waiting on setcal' 2008-Oct-21 19:49:01 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-21 19:49:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-21 19:49:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:49:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:49:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 19:49:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-21 19:49:01 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-21 19:49:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-21 19:49:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 19:49:01 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-21 19:49:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 19:49:01 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-21 19:49:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:49:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 19:49:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 19:49:01 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-21 19:49:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 19:49:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-21 19:49:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 19:49:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-21 19:49:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 19:49:01 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-21 19:49:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 19:49:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 19:49:01 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-21 19:49:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 19:49:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-21 19:49:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-21 19:49:01 LOG5 end_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-21 19:49:01 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Oct-21 19:49:01 INFO3 dopset_later: Setting Doppler correction now 2008-Oct-21 19:49:01 LOG5 antvel: Calling 'antvel 360.000000 7.728177 F 0' 2008-Oct-21 19:49:01 LOG2 antvel: Transforming current Az = 360.00 ZA = 7.73 to apparent RA = 21:25:08.9 Dec = +10:37:32.3 2008-Oct-21 19:49:01 LOG2 antvel: Parameters to Doppler: Topocentric 85741 2008 295 0.0 2008-Oct-21 19:49:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-21 19:49:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-21 19:49:01 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-21 19:49:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-21 19:49:01 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-21 19:49:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-21 19:49:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:49:01 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-21 19:49:01 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-21 19:49:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-21 19:49:02 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-21 19:49:02 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-21 19:49:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-21 19:49:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:49:02 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-21 19:49:02 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-21 19:49:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-21 19:49:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-21 19:49:02 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-21 19:49:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:49:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-21 19:49:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:49:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 19:49:05 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-21 19:49:05 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-21 19:49:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-21 19:49:05 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-21 19:49:05 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-21 19:49:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-21 19:49:05 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-21 19:49:05 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-21 19:49:05 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-21 19:49:05 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-21 19:49:05 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-21 19:49:05 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-21 19:49:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-21 19:49:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:49:05 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 5 dB 2008-Oct-21 19:49:05 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2008-Oct-21 19:49:05 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2008-Oct-21 19:49:05 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Oct-21 19:49:05 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-21 19:49:05 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-21 19:49:05 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-21 19:49:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.052 0.990 ALFA beam 1: 0.966 1.097 2008-Oct-21 19:49:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.902 0.877 ALFA beam 3: 0.960 1.042 2008-Oct-21 19:49:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.883 1.031 ALFA beam 5: 0.942 1.029 2008-Oct-21 19:49:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.016 0.100 ALFA beam 7: 0.892 0.111 2008-Oct-21 19:49:05 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-21 19:49:05 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-21 19:49:05 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-21 19:49:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:49:05 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-21 19:49:05 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-21 19:49:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-21 19:49:05 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-21 19:49:05 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-21 19:49:05 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-21 19:49:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:49:05 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-21 19:49:05 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-21 19:49:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA + KS 2008-Oct-21 19:49:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA + KS 2008-Oct-21 19:49:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA + KS 2008-Oct-21 19:49:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA + KS 2008-Oct-21 19:49:06 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:23:26.7 LST = 21:25:12.9 diff = -106.2 secs 2008-Oct-21 19:49:06 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Oct-21 19:49:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Oct-21 19:49:06 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-21 19:49:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-21 19:49:06 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-21 19:49:06 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-21 19:49:06 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-21 19:49:06 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-21 19:49:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-21 19:49:06 INFO2 take_data: Starting WAPP scan: 829500127 2008-Oct-21 19:49:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-21 19:49:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-21 19:49:06 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-21 19:49:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA + KS' 2008-Oct-21 19:49:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:49:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20081021.a2010.0013.fits 2008-Oct-21 19:49:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85747.00 2008-Oct-21 19:49:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081021.a2010.0013.fits} 2008-Oct-21 19:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:49:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:49:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.985 0.975 1.103 2008-Oct-21 19:49:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.897 0.969 1.050 2008-Oct-21 19:49:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.887 1.028 0.941 1.028 2008-Oct-21 19:49:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.100 0.892 0.111 2008-Oct-21 19:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2008-Oct-21 19:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2008-Oct-21 19:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2008-Oct-21 19:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2008-Oct-21 19:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2008-Oct-21 19:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 19:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:50:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:50:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.989 0.975 1.102 2008-Oct-21 19:50:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.897 0.957 1.041 2008-Oct-21 19:50:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.889 1.023 0.947 1.029 2008-Oct-21 19:50:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.100 0.892 0.111 2008-Oct-21 19:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 19:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 19:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 19:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:51:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:51:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.987 0.974 1.099 2008-Oct-21 19:51:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.897 0.953 1.040 2008-Oct-21 19:51:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.887 1.026 0.954 1.031 2008-Oct-21 19:51:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.100 0.891 0.111 2008-Oct-21 19:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 19:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:52:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:52:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 0.990 0.979 1.104 2008-Oct-21 19:52:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 0.897 0.966 1.041 2008-Oct-21 19:52:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.891 1.032 0.948 1.032 2008-Oct-21 19:52:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.100 0.891 0.110 2008-Oct-21 19:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:53:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:53:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.991 0.979 1.107 2008-Oct-21 19:53:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 0.899 0.967 1.046 2008-Oct-21 19:53:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.888 1.030 0.943 1.029 2008-Oct-21 19:53:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.100 0.898 0.111 2008-Oct-21 19:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 19:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 19:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2008-Oct-21 19:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 19:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 19:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:54:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:54:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 0.988 0.982 1.102 2008-Oct-21 19:54:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 0.899 0.963 1.041 2008-Oct-21 19:54:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.886 1.025 0.942 1.028 2008-Oct-21 19:54:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.100 0.896 0.111 2008-Oct-21 19:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 19:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:55:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:55:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.988 0.984 1.106 2008-Oct-21 19:55:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.897 0.966 1.041 2008-Oct-21 19:55:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.890 1.022 0.942 1.028 2008-Oct-21 19:55:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.018 0.100 0.894 0.111 2008-Oct-21 19:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 19:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2008-Oct-21 19:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2008-Oct-21 19:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2008-Oct-21 19:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2008-Oct-21 19:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 19:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 19:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:56:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:56:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.995 0.985 1.107 2008-Oct-21 19:56:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.898 0.956 1.042 2008-Oct-21 19:56:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.904 1.039 0.945 1.033 2008-Oct-21 19:56:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.100 0.893 0.111 2008-Oct-21 19:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 19:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 19:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 19:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 19:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 19:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 19:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 19:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 19:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 19:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 19:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 19:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:57:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:57:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.993 0.986 1.102 2008-Oct-21 19:57:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.905 0.966 1.045 2008-Oct-21 19:57:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.892 1.027 0.944 1.033 2008-Oct-21 19:57:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.100 0.896 0.111 2008-Oct-21 19:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 19:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 19:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 19:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:58:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:58:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.992 0.974 1.103 2008-Oct-21 19:58:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.897 0.965 1.045 2008-Oct-21 19:58:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.888 1.027 0.948 1.032 2008-Oct-21 19:58:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.100 0.896 0.111 2008-Oct-21 19:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 19:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:59:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:59:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-21 19:59:07 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-21 19:59:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-21 19:59:07 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-21 19:59:07 LOG1 fixed_driftmap: New position: year = 2008.8099458450581 RA = 21:34:50.4 RA/Dec = 21:35:17.2 +10:37:38.2 2008-Oct-21 19:59:07 NOTE fixed_driftmap: Correcting ZA to 7:43:35.5 ... 2008-Oct-21 19:59:07 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.7265278510 -CF 2008-Oct-21 19:59:07 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-21 19:59:07 START begin_task: Starting task 'WAPP calibration' 2008-Oct-21 19:59:07 LOG5 begin_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-21 19:59:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-21 19:59:07 START begin_task: Starting task 'selecting calibration type' 2008-Oct-21 19:59:07 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-21 19:59:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-21 19:59:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-21 19:59:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:59:07 START begin_task: Starting task 'waiting on setcal' 2008-Oct-21 19:59:07 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-21 19:59:07 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.7265278510 -CF 2008-Oct-21 19:59:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:59:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-21 19:59:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 19:59:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:59:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 19:59:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-21 19:59:07 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-21 19:59:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-21 19:59:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 19:59:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-21 19:59:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 19:59:07 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-21 19:59:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 19:59:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 19:59:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 19:59:08 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-21 19:59:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 19:59:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-21 19:59:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 19:59:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-21 19:59:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 19:59:08 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-21 19:59:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 19:59:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 19:59:08 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-21 19:59:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 19:59:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-21 19:59:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-21 19:59:08 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-21 19:59:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-21 19:59:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-21 19:59:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-21 19:59:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 19:59:08 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-21 19:59:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 19:59:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-21 19:59:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 19:59:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 19:59:08 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-21 19:59:08 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-21 19:59:08 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-21 19:59:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-21 19:59:08 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-21 19:59:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-21 19:59:08 INFO2 take_data: Starting WAPP scan: 829500128 2008-Oct-21 19:59:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-21 19:59:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-21 19:59:08 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-21 19:59:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:59:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86349.00 2008-Oct-21 19:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 19:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:59:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 19:59:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-21 19:59:10 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-21 19:59:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-21 19:59:10 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-21 19:59:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-21 19:59:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-21 19:59:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-21 19:59:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 19:59:10 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-21 19:59:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 19:59:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-21 19:59:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 19:59:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 19:59:11 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-21 19:59:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-21 19:59:11 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-21 19:59:11 LOG5 finish_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-21 19:59:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-21 19:59:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 19:59:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-21 19:59:11 LOG5 end_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-21 19:59:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Oct-21 19:59:11 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-21 19:59:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA + KS 2008-Oct-21 19:59:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA + KS 2008-Oct-21 19:59:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA + KS 2008-Oct-21 19:59:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA + KS 2008-Oct-21 19:59:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-21 19:59:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-21 19:59:11 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-21 19:59:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-21 19:59:11 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-21 19:59:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-21 19:59:11 INFO2 take_data: Starting WAPP scan: 829500129 2008-Oct-21 19:59:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-21 19:59:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-21 19:59:11 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-21 19:59:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA + KS' 2008-Oct-21 19:59:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 19:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.498 (still bad) 2008-Oct-21 19:59:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86352.00 2008-Oct-21 19:59:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20081021.a2010.0014.fits 2008-Oct-21 19:59:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081021.a2010.0014.fits} 2008-Oct-21 19:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 19:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 19:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 19:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 19:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 19:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 19:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 19:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 19:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 19:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.431 (still bad) 2008-Oct-21 19:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 19:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 19:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 19:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 19:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 19:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 19:59:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 19:59:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.992 0.973 1.105 2008-Oct-21 19:59:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.895 0.964 1.045 2008-Oct-21 19:59:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.891 1.025 0.949 1.034 2008-Oct-21 19:59:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.100 0.899 0.111 2008-Oct-21 19:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 19:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 19:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 19:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 20:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:00:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:00:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.990 0.979 1.108 2008-Oct-21 20:00:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.897 0.966 1.045 2008-Oct-21 20:00:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.894 1.029 0.946 1.033 2008-Oct-21 20:00:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.100 0.899 0.111 2008-Oct-21 20:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2008-Oct-21 20:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-21 20:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:01:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:01:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.993 0.982 1.107 2008-Oct-21 20:01:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.898 0.967 1.049 2008-Oct-21 20:01:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.893 1.029 0.948 1.034 2008-Oct-21 20:01:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.100 0.897 0.111 2008-Oct-21 20:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2008-Oct-21 20:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:02:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:02:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.994 0.973 1.107 2008-Oct-21 20:02:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.897 0.968 1.049 2008-Oct-21 20:02:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.891 1.028 0.947 1.033 2008-Oct-21 20:02:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.100 0.896 0.111 2008-Oct-21 20:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:03:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:03:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.995 0.978 1.106 2008-Oct-21 20:03:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.899 0.971 1.048 2008-Oct-21 20:03:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.907 1.044 0.948 1.034 2008-Oct-21 20:03:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.100 0.898 0.111 2008-Oct-21 20:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 20:04:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:04:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.994 0.980 1.104 2008-Oct-21 20:04:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 0.899 0.966 1.048 2008-Oct-21 20:04:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.888 1.024 0.946 1.034 2008-Oct-21 20:04:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.100 0.900 0.111 2008-Oct-21 20:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 20:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2008-Oct-21 20:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2008-Oct-21 20:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2008-Oct-21 20:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2008-Oct-21 20:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2008-Oct-21 20:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2008-Oct-21 20:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2008-Oct-21 20:05:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:05:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.995 0.993 1.113 2008-Oct-21 20:05:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.898 0.970 1.044 2008-Oct-21 20:05:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.896 1.032 0.948 1.037 2008-Oct-21 20:05:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.100 0.895 0.111 2008-Oct-21 20:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2008-Oct-21 20:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2008-Oct-21 20:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.134 (still bad) 2008-Oct-21 20:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.146 (still bad) 2008-Oct-21 20:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.143 (still bad) 2008-Oct-21 20:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2008-Oct-21 20:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2008-Oct-21 20:06:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:06:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.998 0.982 1.108 2008-Oct-21 20:06:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.899 0.967 1.046 2008-Oct-21 20:06:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.898 1.036 0.981 1.082 2008-Oct-21 20:06:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.100 0.900 0.111 2008-Oct-21 20:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2008-Oct-21 20:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2008-Oct-21 20:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2008-Oct-21 20:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2008-Oct-21 20:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2008-Oct-21 20:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.138 (still bad) 2008-Oct-21 20:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.162 (still bad) 2008-Oct-21 20:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.178 (still bad) 2008-Oct-21 20:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.180 (still bad) 2008-Oct-21 20:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.167 (still bad) 2008-Oct-21 20:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.140 (still bad) 2008-Oct-21 20:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 20:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 20:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 20:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 20:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:07:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:07:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.996 0.983 1.097 2008-Oct-21 20:07:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.902 0.969 1.048 2008-Oct-21 20:07:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.895 1.029 0.950 1.036 2008-Oct-21 20:07:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.100 0.901 0.111 2008-Oct-21 20:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 20:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.102 (still bad) 2008-Oct-21 20:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 20:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 20:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 20:09:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:09:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.997 0.986 1.099 2008-Oct-21 20:09:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 0.901 0.973 1.047 2008-Oct-21 20:09:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.894 1.027 0.952 1.035 2008-Oct-21 20:09:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.100 0.901 0.111 2008-Oct-21 20:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 20:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:09:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 20:09:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-21 20:09:12 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-21 20:09:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-21 20:09:12 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-21 20:09:12 LOG1 fixed_driftmap: New position: year = 2008.809965016351 RA = 21:44:56.9 RA/Dec = 21:45:23.8 +10:37:43.0 2008-Oct-21 20:09:12 NOTE fixed_driftmap: Correcting ZA to 7:43:30.7 ... 2008-Oct-21 20:09:12 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.7252048443 -CF 2008-Oct-21 20:09:12 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-21 20:09:12 START begin_task: Starting task 'WAPP calibration' 2008-Oct-21 20:09:12 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-21 20:09:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-21 20:09:12 START begin_task: Starting task 'selecting calibration type' 2008-Oct-21 20:09:12 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-21 20:09:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-21 20:09:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-21 20:09:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 20:09:12 START begin_task: Starting task 'waiting on setcal' 2008-Oct-21 20:09:12 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-21 20:09:12 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.7252048443 -CF 2008-Oct-21 20:09:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 20:09:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-21 20:09:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 20:09:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 20:09:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 20:09:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-21 20:09:13 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-21 20:09:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-21 20:09:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 20:09:13 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-21 20:09:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 20:09:13 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-21 20:09:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 20:09:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 20:09:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 20:09:13 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-21 20:09:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 20:09:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-21 20:09:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 20:09:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-21 20:09:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 20:09:13 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-21 20:09:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 20:09:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 20:09:13 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-21 20:09:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 20:09:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-21 20:09:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-21 20:09:13 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-21 20:09:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-21 20:09:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-21 20:09:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-21 20:09:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 20:09:13 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-21 20:09:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 20:09:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-21 20:09:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 20:09:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 20:09:13 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-21 20:09:13 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-21 20:09:13 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-21 20:09:13 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-21 20:09:13 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-21 20:09:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-21 20:09:13 INFO2 take_data: Starting WAPP scan: 829500130 2008-Oct-21 20:09:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-21 20:09:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-21 20:09:14 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-21 20:09:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 20:09:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 555.00 2008-Oct-21 20:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 20:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 20:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 20:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 20:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 20:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 20:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 20:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 20:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 20:09:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 20:09:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-21 20:09:16 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-21 20:09:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-21 20:09:16 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-21 20:09:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-21 20:09:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-21 20:09:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-21 20:09:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 20:09:16 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-21 20:09:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 20:09:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-21 20:09:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 20:09:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 20:09:16 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-21 20:09:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-21 20:09:16 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-21 20:09:16 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-21 20:09:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-21 20:09:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 20:09:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-21 20:09:16 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-21 20:09:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Oct-21 20:09:16 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Oct-21 20:09:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA + KS 2008-Oct-21 20:09:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA + KS 2008-Oct-21 20:09:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA + KS 2008-Oct-21 20:09:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA + KS 2008-Oct-21 20:09:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-21 20:09:17 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-21 20:09:17 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-21 20:09:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-21 20:09:17 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-21 20:09:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-21 20:09:17 INFO2 take_data: Starting WAPP scan: 829500131 2008-Oct-21 20:09:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-21 20:09:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-21 20:09:17 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-21 20:09:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA + KS' 2008-Oct-21 20:09:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 20:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.490 (still bad) 2008-Oct-21 20:09:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 558.00 2008-Oct-21 20:09:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20081021.a2010.0015.fits 2008-Oct-21 20:09:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081021.a2010.0015.fits} 2008-Oct-21 20:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 20:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 20:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 20:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 20:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 20:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 20:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 20:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 20:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 20:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 20:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 20:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:10:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:10:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.996 0.983 1.097 2008-Oct-21 20:10:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.901 0.966 1.045 2008-Oct-21 20:10:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.893 1.029 0.951 1.037 2008-Oct-21 20:10:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.100 0.903 0.111 2008-Oct-21 20:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2008-Oct-21 20:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 20:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 20:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 20:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 20:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 20:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 20:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 20:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 20:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2008-Oct-21 20:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2008-Oct-21 20:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2008-Oct-21 20:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2008-Oct-21 20:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:11:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:11:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.995 0.986 1.098 2008-Oct-21 20:11:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.901 0.973 1.044 2008-Oct-21 20:11:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.895 1.035 0.951 1.033 2008-Oct-21 20:11:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.100 0.898 0.111 2008-Oct-21 20:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.099 (still bad) 2008-Oct-21 20:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.093 (still bad) 2008-Oct-21 20:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:12:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:12:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.996 0.993 1.097 2008-Oct-21 20:12:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.901 0.969 1.043 2008-Oct-21 20:12:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.893 1.031 0.955 1.040 2008-Oct-21 20:12:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.100 0.900 0.111 2008-Oct-21 20:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.098 (still bad) 2008-Oct-21 20:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.093 (still bad) 2008-Oct-21 20:13:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:13:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.996 0.987 1.092 2008-Oct-21 20:13:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.901 0.973 1.044 2008-Oct-21 20:13:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.897 1.033 0.952 1.036 2008-Oct-21 20:13:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.100 0.901 0.111 2008-Oct-21 20:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.093 (still bad) 2008-Oct-21 20:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2008-Oct-21 20:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2008-Oct-21 20:14:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Oct-21 20:14:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.999 0.985 1.093 2008-Oct-21 20:14:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.902 0.967 1.046 2008-Oct-21 20:14:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.895 1.031 0.947 1.037 2008-Oct-21 20:14:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.100 0.901 0.111 2008-Oct-21 20:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2008-Oct-21 20:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2008-Oct-21 20:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2008-Oct-21 20:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.095 (still bad) 2008-Oct-21 20:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:15:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:15:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 0.997 0.984 1.094 2008-Oct-21 20:15:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.903 0.967 1.046 2008-Oct-21 20:15:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.896 1.031 0.948 1.036 2008-Oct-21 20:15:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.101 0.906 0.111 2008-Oct-21 20:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2008-Oct-21 20:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:16:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:16:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.999 0.986 1.097 2008-Oct-21 20:16:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.901 0.965 1.050 2008-Oct-21 20:16:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.896 1.028 0.948 1.036 2008-Oct-21 20:16:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.101 0.907 0.111 2008-Oct-21 20:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2008-Oct-21 20:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2008-Oct-21 20:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2008-Oct-21 20:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2008-Oct-21 20:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Oct-21 20:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2008-Oct-21 20:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2008-Oct-21 20:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:17:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:17:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.999 0.989 1.099 2008-Oct-21 20:17:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.901 0.964 1.046 2008-Oct-21 20:17:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.896 1.029 0.948 1.036 2008-Oct-21 20:17:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.101 0.906 0.111 2008-Oct-21 20:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:18:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:18:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 0.998 0.991 1.099 2008-Oct-21 20:18:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.902 0.960 1.047 2008-Oct-21 20:18:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.897 1.031 0.956 1.044 2008-Oct-21 20:18:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.101 0.908 0.111 2008-Oct-21 20:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:19:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:19:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.999 0.990 1.097 2008-Oct-21 20:19:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.900 0.958 1.046 2008-Oct-21 20:19:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.898 1.030 0.949 1.037 2008-Oct-21 20:19:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.101 0.907 0.112 2008-Oct-21 20:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:19:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 20:19:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-21 20:19:18 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-21 20:19:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-21 20:19:18 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-21 20:19:18 LOG1 fixed_driftmap: New position: year = 2008.8099842193324 RA = 21:55:04.4 RA/Dec = 21:55:31.5 +10:37:47.4 2008-Oct-21 20:19:18 NOTE fixed_driftmap: Correcting ZA to 7:43:26.3 ... 2008-Oct-21 20:19:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.7239609472 -CF 2008-Oct-21 20:19:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-21 20:19:18 START begin_task: Starting task 'WAPP calibration' 2008-Oct-21 20:19:18 LOG5 begin_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-21 20:19:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-21 20:19:18 START begin_task: Starting task 'selecting calibration type' 2008-Oct-21 20:19:18 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Oct-21 20:19:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-21 20:19:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-21 20:19:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 20:19:18 START begin_task: Starting task 'waiting on setcal' 2008-Oct-21 20:19:18 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-21 20:19:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.7239609472 -CF 2008-Oct-21 20:19:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 20:19:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-21 20:19:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 20:19:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 20:19:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 20:19:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-21 20:19:18 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-21 20:19:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-21 20:19:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 20:19:19 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-21 20:19:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 20:19:19 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-21 20:19:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 20:19:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 20:19:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 20:19:19 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-21 20:19:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 20:19:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-21 20:19:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 20:19:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-21 20:19:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 20:19:19 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-21 20:19:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 20:19:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 20:19:19 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-21 20:19:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 20:19:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-21 20:19:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-21 20:19:19 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Oct-21 20:19:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-21 20:19:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-21 20:19:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-21 20:19:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 20:19:19 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-21 20:19:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 20:19:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-21 20:19:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 20:19:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 20:19:19 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-21 20:19:19 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-21 20:19:19 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-21 20:19:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-21 20:19:19 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-21 20:19:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-21 20:19:19 INFO2 take_data: Starting WAPP scan: 829500132 2008-Oct-21 20:19:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-21 20:19:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-21 20:19:19 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-21 20:19:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 20:19:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1160.00 2008-Oct-21 20:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 20:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 20:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 20:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 20:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 20:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 20:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 20:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 20:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 20:19:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 20:19:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-21 20:19:21 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-21 20:19:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-21 20:19:21 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-21 20:19:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-21 20:19:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-21 20:19:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-21 20:19:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 20:19:21 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-21 20:19:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 20:19:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-21 20:19:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 20:19:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 20:19:21 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-21 20:19:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-21 20:19:21 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-21 20:19:21 LOG5 finish_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-21 20:19:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-21 20:19:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 20:19:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-21 20:19:21 LOG5 end_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-21 20:19:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Oct-21 20:19:21 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Oct-21 20:19:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA + KS 2008-Oct-21 20:19:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA + KS 2008-Oct-21 20:19:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA + KS 2008-Oct-21 20:19:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA + KS 2008-Oct-21 20:19:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-21 20:19:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-21 20:19:22 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-21 20:19:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-21 20:19:22 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2008-Oct-21 20:19:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-21 20:19:22 INFO2 take_data: Starting WAPP scan: 829500133 2008-Oct-21 20:19:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-21 20:19:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-21 20:19:22 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Oct-21 20:19:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA + KS' 2008-Oct-21 20:19:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 20:19:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20081021.a2010.0016.fits 2008-Oct-21 20:19:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1163.00 2008-Oct-21 20:19:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081021.a2010.0016.fits} 2008-Oct-21 20:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.491 (still bad) 2008-Oct-21 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 20:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 20:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2008-Oct-21 20:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:20:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:20:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 1.000 0.990 1.098 2008-Oct-21 20:20:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.900 0.967 1.047 2008-Oct-21 20:20:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.896 1.030 0.952 1.040 2008-Oct-21 20:20:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.101 0.907 0.111 2008-Oct-21 20:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2008-Oct-21 20:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.102 (still bad) 2008-Oct-21 20:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.102 (still bad) 2008-Oct-21 20:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2008-Oct-21 20:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2008-Oct-21 20:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2008-Oct-21 20:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2008-Oct-21 20:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2008-Oct-21 20:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2008-Oct-21 20:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:21:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:21:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.999 0.990 1.100 2008-Oct-21 20:21:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.902 0.965 1.047 2008-Oct-21 20:21:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.896 1.030 0.950 1.039 2008-Oct-21 20:21:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.101 0.907 0.111 2008-Oct-21 20:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2008-Oct-21 20:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.102 (still bad) 2008-Oct-21 20:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:22:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:22:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 1.003 0.988 1.099 2008-Oct-21 20:22:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.902 0.967 1.047 2008-Oct-21 20:22:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 1.035 0.949 1.036 2008-Oct-21 20:22:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.101 0.908 0.111 2008-Oct-21 20:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.102 (still bad) 2008-Oct-21 20:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2008-Oct-21 20:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2008-Oct-21 20:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2008-Oct-21 20:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.102 (still bad) 2008-Oct-21 20:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2008-Oct-21 20:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2008-Oct-21 20:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.102 (still bad) 2008-Oct-21 20:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2008-Oct-21 20:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2008-Oct-21 20:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2008-Oct-21 20:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2008-Oct-21 20:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2008-Oct-21 20:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:23:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:23:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.999 0.982 1.108 2008-Oct-21 20:23:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.905 0.961 1.046 2008-Oct-21 20:23:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.900 1.033 0.948 1.038 2008-Oct-21 20:23:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.101 0.907 0.111 2008-Oct-21 20:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2008-Oct-21 20:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2008-Oct-21 20:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2008-Oct-21 20:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.102 (still bad) 2008-Oct-21 20:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2008-Oct-21 20:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2008-Oct-21 20:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2008-Oct-21 20:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:24:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:24:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 1.000 0.989 1.106 2008-Oct-21 20:24:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.905 0.965 1.047 2008-Oct-21 20:24:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.940 1.082 0.954 1.041 2008-Oct-21 20:24:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.101 0.906 0.111 2008-Oct-21 20:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2008-Oct-21 20:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2008-Oct-21 20:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.102 (still bad) 2008-Oct-21 20:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2008-Oct-21 20:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2008-Oct-21 20:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2008-Oct-21 20:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2008-Oct-21 20:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2008-Oct-21 20:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Oct-21 20:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2008-Oct-21 20:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2008-Oct-21 20:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2008-Oct-21 20:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2008-Oct-21 20:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2008-Oct-21 20:25:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:25:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 1.004 0.982 1.110 2008-Oct-21 20:25:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.904 0.964 1.049 2008-Oct-21 20:25:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 1.057 0.952 1.037 2008-Oct-21 20:25:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.101 0.909 0.111 2008-Oct-21 20:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.120 (still bad) 2008-Oct-21 20:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.120 (still bad) 2008-Oct-21 20:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.120 (still bad) 2008-Oct-21 20:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.119 (still bad) 2008-Oct-21 20:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Oct-21 20:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:26:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:26:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.999 0.977 1.110 2008-Oct-21 20:26:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.906 0.971 1.046 2008-Oct-21 20:26:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 1.049 0.952 1.037 2008-Oct-21 20:26:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.101 0.907 0.111 2008-Oct-21 20:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:27:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:27:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 1.001 0.982 1.112 2008-Oct-21 20:27:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.904 0.970 1.049 2008-Oct-21 20:27:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.897 1.035 0.951 1.039 2008-Oct-21 20:27:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.101 0.908 0.111 2008-Oct-21 20:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Oct-21 20:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2008-Oct-21 20:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2008-Oct-21 20:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Oct-21 20:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2008-Oct-21 20:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2008-Oct-21 20:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:28:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:28:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 1.001 0.988 1.112 2008-Oct-21 20:28:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.905 0.969 1.047 2008-Oct-21 20:28:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 1.034 0.953 1.039 2008-Oct-21 20:28:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.101 0.910 0.111 2008-Oct-21 20:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:29:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 20:29:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-21 20:29:23 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Oct-21 20:29:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-21 20:29:23 LOG5 end_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2008-Oct-21 20:29:23 LOG1 fixed_driftmap: New position: year = 2008.8100033906255 RA = 22:05:10.9 RA/Dec = 22:05:38.2 +10:37:51.6 2008-Oct-21 20:29:23 NOTE fixed_driftmap: Correcting ZA to 7:43:22.1 ... 2008-Oct-21 20:29:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 7.7228026786 -CF 2008-Oct-21 20:29:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-21 20:29:23 START begin_task: Starting task 'WAPP calibration' 2008-Oct-21 20:29:23 LOG5 begin_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-21 20:29:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-21 20:29:23 START begin_task: Starting task 'selecting calibration type' 2008-Oct-21 20:29:23 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-21 20:29:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-21 20:29:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-21 20:29:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 20:29:23 START begin_task: Starting task 'waiting on setcal' 2008-Oct-21 20:29:23 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-21 20:29:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 7.7228026786 -CF 2008-Oct-21 20:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 20:29:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-21 20:29:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-21 20:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 20:29:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-21 20:29:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-21 20:29:23 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-21 20:29:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-21 20:29:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 20:29:23 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-21 20:29:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 20:29:23 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-21 20:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-21 20:29:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 20:29:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 20:29:24 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-21 20:29:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 20:29:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-21 20:29:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-21 20:29:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-21 20:29:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-21 20:29:24 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-21 20:29:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-21 20:29:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-21 20:29:24 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-21 20:29:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-21 20:29:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-21 20:29:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-21 20:29:24 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-21 20:29:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-21 20:29:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-21 20:29:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-21 20:29:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 20:29:24 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-21 20:29:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 20:29:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-21 20:29:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 20:29:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 20:29:24 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-21 20:29:24 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-21 20:29:24 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-21 20:29:24 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-21 20:29:24 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-21 20:29:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-21 20:29:25 INFO2 take_data: Starting WAPP scan: 829500134 2008-Oct-21 20:29:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-21 20:29:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-21 20:29:25 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-21 20:29:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 20:29:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1766.00 2008-Oct-21 20:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 20:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 20:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 20:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 20:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 20:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 20:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 20:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 20:29:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 20:29:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-21 20:29:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-21 20:29:27 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-21 20:29:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-21 20:29:27 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-21 20:29:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-21 20:29:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-21 20:29:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-21 20:29:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-21 20:29:27 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-21 20:29:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-21 20:29:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-21 20:29:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-21 20:29:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-21 20:29:27 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-21 20:29:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-21 20:29:27 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-21 20:29:27 LOG5 finish_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-21 20:29:27 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-21 20:29:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-21 20:29:27 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-21 20:29:27 LOG5 end_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-21 20:29:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Oct-21 20:29:27 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Oct-21 20:29:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 CA + KS 2008-Oct-21 20:29:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 CA + KS 2008-Oct-21 20:29:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 CA + KS 2008-Oct-21 20:29:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 CA + KS 2008-Oct-21 20:29:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-21 20:29:28 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-21 20:29:28 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-21 20:29:28 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-21 20:29:28 LOG5 begin_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2008-Oct-21 20:29:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-21 20:29:28 INFO2 take_data: Starting WAPP scan: 829500135 2008-Oct-21 20:29:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-21 20:29:28 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-21 20:29:28 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Oct-21 20:29:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 CA + KS' 2008-Oct-21 20:29:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:29:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.471 1.359 1.342 1.512 2008-Oct-21 20:29:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.255 1.243 1.343 1.437 2008-Oct-21 20:29:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.256 1.440 1.317 1.375 2008-Oct-21 20:29:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.442 0.101 1.265 0.112 2008-Oct-21 20:29:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-21 20:29:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1769.00 2008-Oct-21 20:29:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20081021.a2010.0017.fits 2008-Oct-21 20:29:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081021.a2010.0017.fits} 2008-Oct-21 20:29:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-21 20:29:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-21 20:29:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-21 20:29:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-21 20:29:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-21 20:29:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.004372 MHz 2008-Oct-21 20:29:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1796.000874 MHz 2008-Oct-21 20:29:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1711.997377 MHz 2008-Oct-21 20:29:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1627.993880 MHz 2008-Oct-21 20:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.512 (still bad) 2008-Oct-21 20:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:30:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:30:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 1.000 0.989 1.114 2008-Oct-21 20:30:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.906 0.976 1.048 2008-Oct-21 20:30:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 1.035 0.955 1.035 2008-Oct-21 20:30:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.101 0.907 0.111 2008-Oct-21 20:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2008-Oct-21 20:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:31:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:31:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.999 0.991 1.114 2008-Oct-21 20:31:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.905 0.975 1.048 2008-Oct-21 20:31:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.905 1.035 0.953 1.035 2008-Oct-21 20:31:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.101 0.909 0.111 2008-Oct-21 20:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:32:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:32:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.998 0.992 1.115 2008-Oct-21 20:32:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.903 0.977 1.047 2008-Oct-21 20:32:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 1.032 0.956 1.034 2008-Oct-21 20:32:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.101 0.910 0.111 2008-Oct-21 20:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2008-Oct-21 20:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2008-Oct-21 20:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.120 (still bad) 2008-Oct-21 20:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.119 (still bad) 2008-Oct-21 20:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.119 (still bad) 2008-Oct-21 20:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:33:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:33:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 1.001 0.990 1.116 2008-Oct-21 20:33:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.902 0.971 1.049 2008-Oct-21 20:33:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 1.035 0.958 1.036 2008-Oct-21 20:33:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 0.101 0.911 0.111 2008-Oct-21 20:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.119 (still bad) 2008-Oct-21 20:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.119 (still bad) 2008-Oct-21 20:34:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2008-Oct-21 20:34:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 1.001 0.990 1.116 2008-Oct-21 20:34:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.905 0.974 1.047 2008-Oct-21 20:34:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.900 1.035 0.956 1.035 2008-Oct-21 20:34:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.101 0.912 0.111 2008-Oct-21 20:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.119 (still bad) 2008-Oct-21 20:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.120 (still bad) 2008-Oct-21 20:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.120 (still bad) 2008-Oct-21 20:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2008-Oct-21 20:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2008-Oct-21 20:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.119 (still bad) 2008-Oct-21 20:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2008-Oct-21 20:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2008-Oct-21 20:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2008-Oct-21 20:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2008-Oct-21 20:35:36 WARNING check_wapp_levels