2008-Oct-16 20:05:38 BEGIN executive: CIMA executive starting ... 2008-Oct-16 20:05:38 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-16 20:05:38 INFO1 executive: Using CIMA version 3.0.04 'next' from 2008-09-30 18:33 2008-Oct-16 20:05:38 INFO4 executive: This is an ON-LINE session 2008-Oct-16 20:05:38 INFO4 executive: This is a REMOTE session 2008-Oct-16 20:05:38 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-16 20:05:38 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Brian Kent' 2008-Oct-16 20:05:38 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081016' 2008-Oct-16 20:05:39 LOG2 log_preferences: Currently applied preferences: 2008-Oct-16 20:05:39 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-16 20:05:39 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-16 20:05:39 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-16 20:05:39 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-16 20:05:39 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-16 20:05:39 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-16 20:05:39 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-16 20:05:39 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-16 20:05:39 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-16 20:05:39 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-16 20:05:39 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-16 20:05:39 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-16 20:05:39 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-16 20:05:39 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-16 20:05:39 ALERT executive: CIMA executive ready 2008-Oct-16 20:05:41 NOTE frontend: CIMA frontend ready 2008-Oct-16 20:05:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:05:42 LOG4 got_cormsg: From DATATAKING: setup 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Oct-16 20:05:49 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-16 20:05:49 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: 2008-Oct-16 20:05:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:06:03 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-16 20:06:03 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-16 20:06:03 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-16 20:06:03 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-16 20:06:03 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-16 20:06:03 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-16 20:06:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-16 20:06:03 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-16 20:06:03 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-16 20:06:03 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-16 20:06:03 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-16 20:06:03 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-16 20:06:03 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-16 20:06:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-16 20:06:03 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-16 20:06:03 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-16 20:06:03 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-16 20:06:03 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-16 20:06:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:06:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:06:41 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.51) to the zenith angle limit 19.69 degrees! 2008-Oct-16 20:06:41 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 360.0011 19.5083 RA/Dec = 21:22:41 -01:11:38 2008-Oct-16 20:07:11 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.51) to the zenith angle limit 19.69 degrees! 2008-Oct-16 20:07:11 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 360.0014 19.5083 RA/Dec = 21:23:11 -01:11:38 2008-Oct-16 20:07:38 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-16 20:07:41 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.51) to the zenith angle limit 19.69 degrees! 2008-Oct-16 20:07:41 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 360.0014 19.5082 RA/Dec = 21:23:41 -01:11:39 2008-Oct-16 20:07:55 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-16 20:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-16 20:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-16 20:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-16 20:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-16 20:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-16 20:07:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-16 20:07:55 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-16 20:07:55 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-16 20:07:55 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-16 20:07:55 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-16 20:07:55 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-16 20:07:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-16 20:07:55 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-16 20:07:55 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-16 20:07:55 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-16 20:07:55 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-16 20:07:55 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-16 20:07:55 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-16 20:07:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-16 20:07:57 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-16 20:07:57 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-16 20:07:57 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-16 20:07:57 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-16 20:07:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-16 20:07:57 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-16 20:07:57 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-16 20:07:57 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Oct-16 20:07:57 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-16 20:07:57 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-16 20:07:58 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-16 20:07:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-16 20:07:58 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-16 20:07:58 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-16 20:07:58 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-16 20:07:58 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-16 20:07:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-16 20:07:58 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-16 20:07:58 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-16 20:07:58 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-16 20:07:58 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-16 20:07:58 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-16 20:07:58 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-16 20:07:58 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-16 20:07:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-16 20:07:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-16 20:07:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-16 20:07:58 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-16 20:07:58 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-16 20:07:58 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-16 20:07:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-16 20:07:58 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-16 20:07:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-16 20:07:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-16 20:07:58 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-16 20:07:58 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-16 20:07:58 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-16 20:07:58 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-16 20:07:58 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-16 20:07:58 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-16 20:07:58 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-16 20:07:58 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-16 20:07:58 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-16 20:07:58 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-16 20:07:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-16 20:07:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-16 20:07:58 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-16 20:07:58 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-16 20:07:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-16 20:08:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:11 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.51) to the zenith angle limit 19.69 degrees! 2008-Oct-16 20:08:11 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 360.0012 19.5084 RA/Dec = 21:24:11 -01:11:39 2008-Oct-16 20:08:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-16 20:08:14 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-16 20:08:14 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-16 20:08:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-16 20:08:14 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-16 20:08:14 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-16 20:08:14 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-16 20:08:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-16 20:08:15 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-16 20:08:15 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-16 20:08:15 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-16 20:08:15 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-16 20:08:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-16 20:08:15 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-16 20:08:15 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-16 20:08:15 START begin_task: Starting task 'selecting calibration port' 2008-Oct-16 20:08:15 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-16 20:08:15 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-16 20:08:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-16 20:08:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-16 20:08:15 START begin_task: Starting task 'waiting on calport' 2008-Oct-16 20:08:15 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-16 20:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:15 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-16 20:08:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-16 20:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-16 20:08:15 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-16 20:08:15 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-16 20:08:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-16 20:08:15 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-16 20:08:15 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-16 20:08:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-16 20:08:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-16 20:08:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-16 20:08:15 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-16 20:08:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-16 20:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-16 20:08:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-16 20:08:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-16 20:08:15 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-16 20:08:15 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-16 20:08:15 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-16 20:08:15 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-16 20:08:15 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-16 20:08:15 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-16 20:08:15 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-16 20:08:15 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-16 20:08:15 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-16 20:08:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-Oct-16 20:08:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-Oct-16 20:08:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-Oct-16 20:08:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-Oct-16 20:08:15 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-16 20:08:15 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-16 20:08:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-16 20:08:15 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-16 20:08:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-16 20:08:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-16 20:08:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-16 20:08:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-16 20:08:15 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-16 20:08:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-Oct-16 20:08:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-Oct-16 20:08:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-Oct-16 20:08:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-Oct-16 20:08:16 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-16 20:08:16 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-16 20:08:16 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-16 20:08:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-16 20:08:16 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-16 20:08:16 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-16 20:08:16 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-16 20:08:16 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-16 20:08:16 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-16 20:08:16 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-16 20:08:16 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-16 20:08:16 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-16 20:08:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-16 20:08:16 LOG3 track_source: Calling 'track_source galfasrc 213100.0 +113330 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-16 20:08:16 START begin_task: Starting task 'sending tracking commands' 2008-Oct-16 20:08:16 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-16 20:08:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-16 20:08:16 INFO1 track_source: Starting to track galfasrc 2008-Oct-16 20:08:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-16 20:08:16 LOG3 vw_send: To DATATAKING: set ra 213100.0 2008-Oct-16 20:08:16 LOG3 vw_send: To DATATAKING: set dec +113330 2008-Oct-16 20:08:16 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-16 20:08:16 LOG3 vw_send: To DATATAKING: pnt tr 213100.0 +113330 -CJ 2008-Oct-16 20:08:16 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-16 20:08:16 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-16 20:08:16 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-16 20:08:16 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-16 20:08:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-16 20:08:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-16 20:08:16 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-16 20:08:16 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-16 20:08:16 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-16 20:08:16 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-16 20:08:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-16 20:08:16 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-16 20:08:16 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-16 20:08:16 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-16 20:08:16 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-16 20:08:16 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-16 20:08:16 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-16 20:08:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-16 20:08:17 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-16 20:08:17 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-16 20:08:17 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-16 20:08:17 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-16 20:08:17 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-16 20:08:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20081016.a2010.0000.fits 2008-Oct-16 20:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-Oct-16 20:08:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-16 20:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-16 20:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-16 20:08:17 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081016.a2010.0000.fits} 2008-Oct-16 20:08:17 LOG4 got_cormsg: From DATATAKING: set ra 213100.0 2008-Oct-16 20:08:17 LOG4 got_cormsg: From DATATAKING: set dec +113330 2008-Oct-16 20:08:17 LOG4 got_cormsg: From DATATAKING: vw% 213100.0 2008-Oct-16 20:08:17 LOG4 got_cormsg: From DATATAKING: vw% +113330 2008-Oct-16 20:08:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-16 20:08:17 LOG4 got_cormsg: From DATATAKING: pnt tr 213100.0 +113330 -CJ 2008-Oct-16 20:08:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-16 20:08:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-16 20:08:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-Oct-16 20:08:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-16 20:08:17 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-16 20:08:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-16 20:08:17 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-16 20:08:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-16 20:08:17 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-16 20:08:17 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-16 20:08:17 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-16 20:08:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-16 20:08:17 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-16 20:08:18 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-16 20:08:18 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-16 20:08:18 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-16 20:08:18 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-16 20:08:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-16 20:08:18 LOG3 waittrk: Start waittrk 5 2008-Oct-16 20:08:18 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-16 20:08:18 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-16 20:08:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-16 20:08:23 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-16 20:08:23 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-16 20:08:23 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-16 20:13:34 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-16 20:13:34 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-16 20:13:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-16 20:13:34 INFO2 waittrk: Now tracking galfasrc 2008-Oct-16 20:13:34 LOG4 waittrk: Current telescope position: Az = 356.69 ZA = 6.73 2008-Oct-16 20:13:34 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-16 20:13:34 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-16 20:13:34 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-16 20:13:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-16 20:13:34 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-16 20:13:34 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-16 20:13:34 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-16 20:13:34 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-16 20:13:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-16 20:13:35 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-16 20:13:35 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-16 20:13:35 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-16 20:13:35 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-16 20:13:35 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-16 20:13:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-16 20:13:35 START begin_task: Starting task 'selecting calibration type' 2008-Oct-16 20:13:35 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-16 20:13:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-16 20:13:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-16 20:13:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-16 20:13:35 START begin_task: Starting task 'waiting on setcal' 2008-Oct-16 20:13:35 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-16 20:13:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-16 20:13:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-16 20:13:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:13:35 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-16 20:13:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-16 20:13:35 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-16 20:13:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-16 20:13:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-16 20:13:35 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-16 20:13:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-16 20:13:35 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-16 20:13:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:13:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-16 20:13:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-16 20:13:35 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-16 20:13:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-16 20:13:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-16 20:13:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-16 20:13:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-16 20:13:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-16 20:13:35 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-16 20:13:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-16 20:13:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-16 20:13:35 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-16 20:13:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-16 20:13:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-16 20:13:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-16 20:13:35 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-16 20:13:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-Oct-16 20:13:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-Oct-16 20:13:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-Oct-16 20:13:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-Oct-16 20:13:35 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081016.a2010.0000.fits' is empty! 2008-Oct-16 20:13:35 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-16 20:13:35 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-16 20:13:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-16 20:13:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-16 20:13:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-16 20:13:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-16 20:13:35 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-16 20:13:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-16 20:13:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-16 20:13:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-16 20:13:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-16 20:13:36 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-16 20:13:36 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-16 20:13:36 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-16 20:13:36 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-16 20:13:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-16 20:13:36 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-16 20:13:36 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-16 20:13:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-16 20:13:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-16 20:13:36 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-16 20:13:36 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-16 20:13:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-16 20:13:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-16 20:13:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-Oct-16 20:13:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:13:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-16 20:13:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-16 20:13:39 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-16 20:13:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-16 20:13:39 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-16 20:13:39 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-16 20:13:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-16 20:13:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-16 20:13:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-16 20:13:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-16 20:13:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-16 20:13:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-16 20:13:39 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-16 20:13:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:13:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-16 20:13:39 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 5 dB 2008-Oct-16 20:13:39 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 5 4 dB 2008-Oct-16 20:13:39 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 2 dB 2008-Oct-16 20:13:39 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 1 3 dB 2008-Oct-16 20:13:39 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-16 20:13:39 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-16 20:13:39 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-16 20:13:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.038 0.910 ALFA beam 1: 0.890 1.114 2008-Oct-16 20:13:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.086 0.993 ALFA beam 3: 0.897 1.059 2008-Oct-16 20:13:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.082 1.010 ALFA beam 5: 0.930 1.070 2008-Oct-16 20:13:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.967 0.972 ALFA beam 7: 1.082 0.863 2008-Oct-16 20:13:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-16 20:13:39 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-16 20:13:39 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-16 20:13:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-16 20:13:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-16 20:13:39 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-16 20:13:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-16 20:13:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-16 20:13:39 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-16 20:13:39 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-16 20:13:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-16 20:13:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-16 20:13:39 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-16 20:13:39 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-16 20:13:39 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-16 20:13:39 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-16 20:13:40 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:13:40 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79628 J 2008-Oct-16 20:13:40 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:13:40 LOG2 antvel: Parameters to Doppler: Topocentric 87219 2008 290 0.0 2008-Oct-16 20:13:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:13:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-16 20:13:40 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-16 20:13:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:13:40 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:13:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-16 20:13:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:13:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-16 20:13:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:13:40 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-16 20:13:40 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.502263 2008.7962842231348 18.999933 2008-Oct-16 20:13:40 LOG4 log_alfabeam: ALFABEAM 0 21.516666666666573 11.558333333333337 2008-Oct-16 20:13:40 LOG4 log_alfabeam: ALFABEAM 1 21.515179067793675 11.662186946667704 2008-Oct-16 20:13:40 LOG4 log_alfabeam: ALFABEAM 2 21.510713451716558 11.589701315219211 2008-Oct-16 20:13:40 LOG4 log_alfabeam: ALFABEAM 3 21.512142736267926 11.485642124205350 2008-Oct-16 20:13:40 LOG4 log_alfabeam: ALFABEAM 4 21.518189551646220 11.454546806559666 2008-Oct-16 20:13:40 LOG4 log_alfabeam: ALFABEAM 5 21.522675258882149 11.528075493410775 2008-Oct-16 20:13:40 LOG4 log_alfabeam: ALFABEAM 6 21.521094205027431 11.631644971054239 2008-Oct-16 20:13:40 INFO2 take_data: Starting WAPP+GALFA scan: 829000030 2008-Oct-16 20:13:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:13:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:13:40 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-16 20:13:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:13:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-16 20:13:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:13:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:13:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:13:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 821.00 2008-Oct-16 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:13:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:13:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:13:51 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-16 20:13:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:13:51 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-16 20:13:51 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-16 20:13:51 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-16 20:13:51 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-16 20:13:51 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:13:51 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79628 J 2008-Oct-16 20:13:51 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:13:51 LOG2 antvel: Parameters to Doppler: Topocentric 87231 2008 290 0.0 2008-Oct-16 20:13:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:13:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-16 20:13:51 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-16 20:13:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:13:51 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:13:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-16 20:13:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:13:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-16 20:13:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:13:51 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-16 20:13:51 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.505605 2008.7962846033918 18.999933 2008-Oct-16 20:13:51 LOG4 log_alfabeam: ALFABEAM 0 21.516666666666669 11.558333333333334 2008-Oct-16 20:13:51 LOG4 log_alfabeam: ALFABEAM 1 21.515228917876616 11.662338402063963 2008-Oct-16 20:13:51 LOG4 log_alfabeam: ALFABEAM 2 21.510728641936836 11.590317097297106 2008-Oct-16 20:13:51 LOG4 log_alfabeam: ALFABEAM 3 21.512107989105772 11.486112431513588 2008-Oct-16 20:13:51 LOG4 log_alfabeam: ALFABEAM 4 21.518139780167534 11.454391714118056 2008-Oct-16 20:13:51 LOG4 log_alfabeam: ALFABEAM 5 21.522660607205744 11.527454297974764 2008-Oct-16 20:13:51 LOG4 log_alfabeam: ALFABEAM 6 21.521129232485244 11.631184826389163 2008-Oct-16 20:13:51 INFO2 take_data: Starting WAPP+GALFA scan: 829000031 2008-Oct-16 20:13:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:13:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:13:52 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-16 20:13:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:13:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-16 20:13:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:13:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:13:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:13:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 833.00 2008-Oct-16 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:14:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:14:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:14:03 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-16 20:14:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:14:03 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-16 20:14:03 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-16 20:14:03 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-16 20:14:03 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-16 20:14:03 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:14:03 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79628 J 2008-Oct-16 20:14:03 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:14:03 LOG2 antvel: Parameters to Doppler: Topocentric 87243 2008 290 0.0 2008-Oct-16 20:14:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:14:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-16 20:14:03 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-16 20:14:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:14:03 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:14:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-16 20:14:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:14:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-16 20:14:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:14:03 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-16 20:14:03 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.508947 2008.796284983649 18.999933 2008-Oct-16 20:14:03 LOG4 log_alfabeam: ALFABEAM 0 21.516666666666470 11.558333333333341 2008-Oct-16 20:14:03 LOG4 log_alfabeam: ALFABEAM 1 21.515278866724650 11.662484771415487 2008-Oct-16 20:14:03 LOG4 log_alfabeam: ALFABEAM 2 21.510744134512208 11.590931608448908 2008-Oct-16 20:14:03 LOG4 log_alfabeam: ALFABEAM 3 21.512073451223898 11.486586578066710 2008-Oct-16 20:14:03 LOG4 log_alfabeam: ALFABEAM 4 21.518089906507321 11.454241693275964 2008-Oct-16 20:14:03 LOG4 log_alfabeam: ALFABEAM 5 21.522645648249135 11.526834254735583 2008-Oct-16 20:14:03 LOG4 log_alfabeam: ALFABEAM 6 21.521164060505793 11.630720788171654 2008-Oct-16 20:14:03 INFO2 take_data: Starting WAPP+GALFA scan: 829000032 2008-Oct-16 20:14:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:14:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:14:04 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-16 20:14:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:14:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-16 20:14:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:14:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:14:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:14:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 845.00 2008-Oct-16 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:14:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:14:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:14:15 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-16 20:14:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:14:15 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-16 20:14:15 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-16 20:14:15 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-16 20:14:15 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-16 20:14:15 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:14:15 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79629 J 2008-Oct-16 20:14:15 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:14:15 LOG2 antvel: Parameters to Doppler: Topocentric 87255 2008 290 0.0 2008-Oct-16 20:14:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:14:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-16 20:14:15 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-16 20:14:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:14:15 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:14:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-16 20:14:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:14:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-16 20:14:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:14:15 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-16 20:14:15 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.512290 2008.796285363906 18.999933 2008-Oct-16 20:14:15 LOG4 log_alfabeam: ALFABEAM 0 21.516666666666669 11.558333333333337 2008-Oct-16 20:14:15 LOG4 log_alfabeam: ALFABEAM 1 21.515328921774824 11.662626066111027 2008-Oct-16 20:14:15 LOG4 log_alfabeam: ALFABEAM 2 21.510759932251254 11.591544935721219 2008-Oct-16 20:14:15 LOG4 log_alfabeam: ALFABEAM 3 21.512039118005674 11.487064639506936 2008-Oct-16 20:14:15 LOG4 log_alfabeam: ALFABEAM 4 21.518039923221995 11.454096732653545 2008-Oct-16 20:14:15 LOG4 log_alfabeam: ALFABEAM 5 21.522630379188641 11.526215276470317 2008-Oct-16 20:14:15 LOG4 log_alfabeam: ALFABEAM 6 21.521198693721985 11.630252780550029 2008-Oct-16 20:14:15 INFO2 take_data: Starting WAPP+GALFA scan: 829000033 2008-Oct-16 20:14:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:14:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:14:16 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-16 20:14:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:14:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-16 20:14:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:14:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:14:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:14:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 857.00 2008-Oct-16 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:14:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:14:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:14:27 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-16 20:14:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:14:27 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-16 20:14:27 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-16 20:14:27 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-16 20:14:27 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-16 20:14:27 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:14:27 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79629 J 2008-Oct-16 20:14:27 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:14:27 LOG2 antvel: Parameters to Doppler: Topocentric 87267 2008 290 0.0 2008-Oct-16 20:14:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:14:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-16 20:14:27 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-16 20:14:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:14:27 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:14:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-16 20:14:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:14:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-16 20:14:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:14:27 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-16 20:14:27 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.515632 2008.796285744163 18.999933 2008-Oct-16 20:14:27 LOG4 log_alfabeam: ALFABEAM 0 21.516666666666527 11.558333333333334 2008-Oct-16 20:14:27 LOG4 log_alfabeam: ALFABEAM 1 21.515379045476973 11.662762173846302 2008-Oct-16 20:14:27 LOG4 log_alfabeam: ALFABEAM 2 21.510776023598492 11.592156616468479 2008-Oct-16 20:14:27 LOG4 log_alfabeam: ALFABEAM 3 21.512005015520646 11.487546260046498 2008-Oct-16 20:14:27 LOG4 log_alfabeam: ALFABEAM 4 21.517989867792590 11.453956947866132 2008-Oct-16 20:14:27 LOG4 log_alfabeam: ALFABEAM 5 21.522614811094680 11.525597830811892 2008-Oct-16 20:14:27 LOG4 log_alfabeam: ALFABEAM 6 21.521233105804363 11.629781150117861 2008-Oct-16 20:14:27 INFO2 take_data: Starting WAPP+GALFA scan: 829000034 2008-Oct-16 20:14:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:14:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:14:28 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-16 20:14:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:14:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-16 20:14:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:14:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:14:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:14:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 869.00 2008-Oct-16 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:14:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:14:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:14:39 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-16 20:14:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:14:39 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-16 20:14:39 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-16 20:14:39 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-16 20:14:39 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-16 20:14:39 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:14:39 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79629 J 2008-Oct-16 20:14:39 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:14:39 LOG2 antvel: Parameters to Doppler: Topocentric 87279 2008 290 0.0 2008-Oct-16 20:14:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:14:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-16 20:14:39 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-16 20:14:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:14:39 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:14:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-16 20:14:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:14:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-16 20:14:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:14:39 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-16 20:14:39 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.518975 2008.79628612442 18.999933 2008-Oct-16 20:14:39 LOG4 log_alfabeam: ALFABEAM 0 21.516666666666353 11.558333333333342 2008-Oct-16 20:14:39 LOG4 log_alfabeam: ALFABEAM 1 21.515429260173129 11.662893150661485 2008-Oct-16 20:14:39 LOG4 log_alfabeam: ALFABEAM 2 21.510792415936262 11.592766921587469 2008-Oct-16 20:14:39 LOG4 log_alfabeam: ALFABEAM 3 21.511971128796546 11.488031656305759 2008-Oct-16 20:14:39 LOG4 log_alfabeam: ALFABEAM 4 21.517939717892084 11.453822281800482 2008-Oct-16 20:14:39 LOG4 log_alfabeam: ALFABEAM 5 21.522598936729313 11.524981645094462 2008-Oct-16 20:14:39 LOG4 log_alfabeam: ALFABEAM 6 21.521267311824754 11.629305683085819 2008-Oct-16 20:14:39 INFO2 take_data: Starting WAPP+GALFA scan: 829000035 2008-Oct-16 20:14:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:14:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:14:40 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-16 20:14:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:14:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-16 20:14:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:14:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:14:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:14:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 881.00 2008-Oct-16 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:14:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:14:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:14:51 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-16 20:14:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:14:51 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-16 20:14:51 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-16 20:14:51 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-16 20:14:51 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-16 20:14:51 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:14:51 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79629 J 2008-Oct-16 20:14:51 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:14:51 LOG2 antvel: Parameters to Doppler: Topocentric 87291 2008 290 0.0 2008-Oct-16 20:14:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:14:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-16 20:14:51 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-16 20:14:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:14:51 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:14:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-16 20:14:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:14:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-16 20:14:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:14:51 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-16 20:14:51 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.522317 2008.796286504677 18.999933 2008-Oct-16 20:14:51 LOG4 log_alfabeam: ALFABEAM 0 21.516666666664122 11.558333333333358 2008-Oct-16 20:14:51 LOG4 log_alfabeam: ALFABEAM 1 21.515479528124914 11.663018895187950 2008-Oct-16 20:14:51 LOG4 log_alfabeam: ALFABEAM 2 21.510809097070286 11.593375391496716 2008-Oct-16 20:14:51 LOG4 log_alfabeam: ALFABEAM 3 21.511937483427257 11.488520464573876 2008-Oct-16 20:14:51 LOG4 log_alfabeam: ALFABEAM 4 21.517889511191967 11.453692839167397 2008-Oct-16 20:14:51 LOG4 log_alfabeam: ALFABEAM 5 21.522582767810391 11.524367184169609 2008-Oct-16 20:14:51 LOG4 log_alfabeam: ALFABEAM 6 21.521301285896488 11.628826734114313 2008-Oct-16 20:14:51 INFO2 take_data: Starting WAPP+GALFA scan: 829000036 2008-Oct-16 20:14:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:14:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:14:52 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-16 20:14:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:14:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-16 20:14:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:14:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:14:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:14:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 893.00 2008-Oct-16 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:15:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:15:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:15:03 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-16 20:15:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:15:03 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-16 20:15:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-16 20:15:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-16 20:15:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-16 20:15:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-16 20:15:03 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-16 20:15:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-16 20:15:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-16 20:15:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-16 20:15:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-16 20:15:03 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-16 20:15:03 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-16 20:15:03 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-16 20:15:03 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-16 20:15:03 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:15:03 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79629 J 2008-Oct-16 20:15:03 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:15:03 LOG2 antvel: Parameters to Doppler: Topocentric 87303 2008 290 0.0 2008-Oct-16 20:15:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:15:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-16 20:15:03 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-16 20:15:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:15:03 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:15:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-16 20:15:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:15:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-16 20:15:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:15:03 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-16 20:15:03 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.525660 2008.7962868849343 18.999933 2008-Oct-16 20:15:03 LOG4 log_alfabeam: ALFABEAM 0 21.516666666666872 11.558333333333337 2008-Oct-16 20:15:03 LOG4 log_alfabeam: ALFABEAM 1 21.515529871708406 11.663139462071246 2008-Oct-16 20:15:03 LOG4 log_alfabeam: ALFABEAM 2 21.510826074468095 11.593982296573765 2008-Oct-16 20:15:03 LOG4 log_alfabeam: ALFABEAM 3 21.511904064515608 11.489012902343019 2008-Oct-16 20:15:03 LOG4 log_alfabeam: ALFABEAM 4 21.517839225361715 11.453568564250205 2008-Oct-16 20:15:03 LOG4 log_alfabeam: ALFABEAM 5 21.522566297029719 11.523754175897247 2008-Oct-16 20:15:03 LOG4 log_alfabeam: ALFABEAM 6 21.521335043032224 11.628344088539221 2008-Oct-16 20:15:03 INFO2 take_data: Starting WAPP+GALFA scan: 829000037 2008-Oct-16 20:15:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:15:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:15:04 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-16 20:15:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:15:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-16 20:15:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:15:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:15:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:15:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 905.00 2008-Oct-16 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:15:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:15:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:15:15 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-16 20:15:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:15:15 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-16 20:15:15 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-16 20:15:15 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-16 20:15:15 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-16 20:15:15 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:15:15 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79629 J 2008-Oct-16 20:15:15 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:15:15 LOG2 antvel: Parameters to Doppler: Topocentric 87315 2008 290 0.0 2008-Oct-16 20:15:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:15:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-16 20:15:15 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-16 20:15:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:15:15 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:15:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-16 20:15:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:15:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-16 20:15:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:15:15 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-16 20:15:15 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.529002 2008.7962872651913 18.999933 2008-Oct-16 20:15:15 LOG4 log_alfabeam: ALFABEAM 0 21.516666666666723 11.558333333333339 2008-Oct-16 20:15:15 LOG4 log_alfabeam: ALFABEAM 1 21.515580253023522 11.663254761013665 2008-Oct-16 20:15:15 LOG4 log_alfabeam: ALFABEAM 2 21.510843335305612 11.594587180820866 2008-Oct-16 20:15:15 LOG4 log_alfabeam: ALFABEAM 3 21.511870897159120 11.489508598375826 2008-Oct-16 20:15:15 LOG4 log_alfabeam: ALFABEAM 4 21.517788898217283 11.453449550712710 2008-Oct-16 20:15:15 LOG4 log_alfabeam: ALFABEAM 5 21.522549536737277 11.523143081816924 2008-Oct-16 20:15:15 LOG4 log_alfabeam: ALFABEAM 6 21.521368557808852 11.627858108711676 2008-Oct-16 20:15:15 INFO2 take_data: Starting WAPP+GALFA scan: 829000038 2008-Oct-16 20:15:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:15:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:15:16 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-16 20:15:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:15:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-16 20:15:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:15:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:15:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:15:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 917.00 2008-Oct-16 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:15:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:15:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:15:27 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-16 20:15:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:15:27 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-16 20:15:27 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-16 20:15:27 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-16 20:15:27 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-16 20:15:27 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:15:27 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79629 J 2008-Oct-16 20:15:27 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:15:27 LOG2 antvel: Parameters to Doppler: Topocentric 87327 2008 290 0.0 2008-Oct-16 20:15:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:15:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-16 20:15:27 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-16 20:15:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:15:27 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:15:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-16 20:15:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:15:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-16 20:15:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:15:27 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-16 20:15:27 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.532345 2008.7962876454483 18.999933 2008-Oct-16 20:15:27 LOG4 log_alfabeam: ALFABEAM 0 21.516666666667032 11.558333333333334 2008-Oct-16 20:15:27 LOG4 log_alfabeam: ALFABEAM 1 21.515630694450021 11.663364845284859 2008-Oct-16 20:15:27 LOG4 log_alfabeam: ALFABEAM 2 21.510860887123503 11.595190314162558 2008-Oct-16 20:15:27 LOG4 log_alfabeam: ALFABEAM 3 21.511837966512211 11.490007771087390 2008-Oct-16 20:15:27 LOG4 log_alfabeam: ALFABEAM 4 21.517738507406804 11.453335744214471 2008-Oct-16 20:15:27 LOG4 log_alfabeam: ALFABEAM 5 21.522532479545372 11.522533630245263 2008-Oct-16 20:15:27 LOG4 log_alfabeam: ALFABEAM 6 21.521401845180950 11.627368579047324 2008-Oct-16 20:15:27 INFO2 take_data: Starting WAPP+GALFA scan: 829000039 2008-Oct-16 20:15:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:15:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:15:28 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-16 20:15:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:15:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-16 20:15:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:15:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:15:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:15:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 929.00 2008-Oct-16 20:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:15:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:15:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:15:39 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-16 20:15:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:15:39 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-16 20:15:39 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-16 20:15:39 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-16 20:15:39 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-16 20:15:39 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:15:39 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79629 J 2008-Oct-16 20:15:39 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:15:39 LOG2 antvel: Parameters to Doppler: Topocentric 87339 2008 290 0.0 2008-Oct-16 20:15:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:15:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-16 20:15:39 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-16 20:15:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:15:39 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:15:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-16 20:15:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:15:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-16 20:15:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:15:39 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-16 20:15:39 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.535687 2008.7962880257053 18.999933 2008-Oct-16 20:15:39 LOG4 log_alfabeam: ALFABEAM 0 21.516666666666868 11.558333333333328 2008-Oct-16 20:15:39 LOG4 log_alfabeam: ALFABEAM 1 21.515681158015088 11.663469635755510 2008-Oct-16 20:15:39 LOG4 log_alfabeam: ALFABEAM 2 21.510878716497292 11.595791244689412 2008-Oct-16 20:15:39 LOG4 log_alfabeam: ALFABEAM 3 21.511805297156855 11.490510042132621 2008-Oct-16 20:15:39 LOG4 log_alfabeam: ALFABEAM 4 21.517688090860769 11.453227227266755 2008-Oct-16 20:15:39 LOG4 log_alfabeam: ALFABEAM 5 21.522515138431810 11.521926278892712 2008-Oct-16 20:15:39 LOG4 log_alfabeam: ALFABEAM 6 21.521434880231617 11.626875869188359 2008-Oct-16 20:15:39 INFO2 take_data: Starting WAPP+GALFA scan: 829000040 2008-Oct-16 20:15:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:15:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:15:40 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-16 20:15:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:15:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-16 20:15:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:15:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:15:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:15:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 941.00 2008-Oct-16 20:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:15:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:15:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:15:51 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-16 20:15:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:15:51 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-16 20:15:51 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-16 20:15:51 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-16 20:15:51 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-16 20:15:51 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:15:51 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79629 J 2008-Oct-16 20:15:51 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:15:51 LOG2 antvel: Parameters to Doppler: Topocentric 87351 2008 290 0.0 2008-Oct-16 20:15:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:15:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-16 20:15:51 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-16 20:15:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:15:51 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:15:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-16 20:15:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:15:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-16 20:15:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:15:51 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-16 20:15:51 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.539030 2008.7962884059623 18.999933 2008-Oct-16 20:15:51 LOG4 log_alfabeam: ALFABEAM 0 21.516666666666826 11.558333333333332 2008-Oct-16 20:15:51 LOG4 log_alfabeam: ALFABEAM 1 21.515731666107772 11.663569184324368 2008-Oct-16 20:15:51 LOG4 log_alfabeam: ALFABEAM 2 21.510896831043432 11.596390241933353 2008-Oct-16 20:15:51 LOG4 log_alfabeam: ALFABEAM 3 21.511772874302864 11.491015630908244 2008-Oct-16 20:15:51 LOG4 log_alfabeam: ALFABEAM 4 21.517637626205698 11.453123946898472 2008-Oct-16 20:15:51 LOG4 log_alfabeam: ALFABEAM 5 21.522497505927198 11.521320756468798 2008-Oct-16 20:15:51 LOG4 log_alfabeam: ALFABEAM 6 21.521467677849461 11.626379762576661 2008-Oct-16 20:15:51 INFO2 take_data: Starting WAPP+GALFA scan: 829000041 2008-Oct-16 20:15:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:15:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:15:52 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-16 20:15:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:15:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-16 20:15:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:15:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:15:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:15:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 953.00 2008-Oct-16 20:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:16:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:16:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:16:03 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-16 20:16:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:16:03 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-16 20:16:03 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-16 20:16:03 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-16 20:16:03 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-16 20:16:03 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:16:03 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79629 J 2008-Oct-16 20:16:03 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:16:03 LOG2 antvel: Parameters to Doppler: Topocentric 87363 2008 290 0.0 2008-Oct-16 20:16:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:16:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-16 20:16:03 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-16 20:16:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:16:03 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:16:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-16 20:16:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:16:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-16 20:16:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:16:03 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-16 20:16:03 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.542372 2008.7962887862195 18.999933 2008-Oct-16 20:16:03 LOG4 log_alfabeam: ALFABEAM 0 21.516666666666652 11.558333333333337 2008-Oct-16 20:16:03 LOG4 log_alfabeam: ALFABEAM 1 21.515782180700707 11.663663423092524 2008-Oct-16 20:16:03 LOG4 log_alfabeam: ALFABEAM 2 21.510915216745929 11.596986858567359 2008-Oct-16 20:16:03 LOG4 log_alfabeam: ALFABEAM 3 21.511740721982207 11.491524152406313 2008-Oct-16 20:16:03 LOG4 log_alfabeam: ALFABEAM 4 21.517587151435464 11.453025974399205 2008-Oct-16 20:16:03 LOG4 log_alfabeam: ALFABEAM 5 21.522479595618528 11.520717516347306 2008-Oct-16 20:16:03 LOG4 log_alfabeam: ALFABEAM 6 21.521500213652516 11.625880635719707 2008-Oct-16 20:16:03 INFO2 take_data: Starting WAPP+GALFA scan: 829000042 2008-Oct-16 20:16:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:16:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:16:04 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-16 20:16:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:16:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-16 20:16:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:16:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:16:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:16:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 965.00 2008-Oct-16 20:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:16:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:16:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:16:15 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-16 20:16:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:16:15 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-16 20:16:15 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-16 20:16:15 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-16 20:16:15 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-16 20:16:15 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:16:15 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79629 J 2008-Oct-16 20:16:15 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:16:15 LOG2 antvel: Parameters to Doppler: Topocentric 87375 2008 290 0.0 2008-Oct-16 20:16:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:16:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-16 20:16:15 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-16 20:16:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:16:15 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:16:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-16 20:16:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:16:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-16 20:16:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:16:15 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-16 20:16:15 LOG5 log_alfabeam: Parameters: 21.516666666666666 11.558333333333334 21.545714 2008.7962891664765 18.999933 2008-Oct-16 20:16:15 LOG4 log_alfabeam: ALFABEAM 0 21.516666666666687 11.558333333333337 2008-Oct-16 20:16:15 LOG4 log_alfabeam: ALFABEAM 1 21.515832709090201 11.663752376753166 2008-Oct-16 20:16:15 LOG4 log_alfabeam: ALFABEAM 2 21.510933875680291 11.597581186299063 2008-Oct-16 20:16:15 LOG4 log_alfabeam: ALFABEAM 3 21.511708834961944 11.492035673571412 2008-Oct-16 20:16:15 LOG4 log_alfabeam: ALFABEAM 4 21.517536659260600 11.452933285117524 2008-Oct-16 20:16:15 LOG4 log_alfabeam: ALFABEAM 5 21.522461405438449 11.520116467084049 2008-Oct-16 20:16:15 LOG4 log_alfabeam: ALFABEAM 6 21.521532492852007 11.625378421752060 2008-Oct-16 20:16:15 INFO2 take_data: Starting WAPP+GALFA scan: 829000043 2008-Oct-16 20:16:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-16 20:16:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-16 20:16:16 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-16 20:16:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-16 20:16:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-16 20:16:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:16:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:16:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-16 20:16:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 977.00 2008-Oct-16 20:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-16 20:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2008-Oct-16 20:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-16 20:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-16 20:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2008-Oct-16 20:16:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-16 20:16:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-16 20:16:27 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-16 20:16:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-16 20:16:27 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-16 20:16:27 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Oct-16 20:16:27 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-16 20:16:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-16 20:16:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-16 20:16:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-16 20:16:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-16 20:16:27 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-16 20:16:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-16 20:16:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-16 20:16:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-16 20:16:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-16 20:16:27 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-16 20:16:27 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-16 20:16:27 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-16 20:16:27 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-16 20:16:27 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-16 20:16:27 LOG5 antvel: Calling 'antvel 213100.000000 113330.000000 J 0' 2008-Oct-16 20:16:27 LOG2 antvel: Precessing RA = 21:31:00.0 Dec = +11:33:30.0 Epoch = 2008.79629 J 2008-Oct-16 20:16:27 LOG2 antvel: Computed apparent RA = 21:31:26.7 Dec = +11:36:00.4 2008-Oct-16 20:16:27 LOG2 antvel: Parameters to Doppler: Topocentric 87387 2008 290 0.0 2008-Oct-16 20:16:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-16 20:16:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-16 20:16:27 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-16 20:16:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-16 20:16:27 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-16 20:16:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-16 20:16:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-16 20:16:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-16 20:16:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-16 20:16:27 LOG5 be