2008-Oct-14 20:17:23 BEGIN executive: CIMA executive starting ... 2008-Oct-14 20:17:24 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-14 20:17:24 INFO1 executive: Using CIMA version 3.0.04 'next' from 2008-09-30 18:33 2008-Oct-14 20:17:24 INFO4 executive: This is an ON-LINE session 2008-Oct-14 20:17:24 INFO4 executive: This is a REMOTE session 2008-Oct-14 20:17:24 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-14 20:17:24 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Kelley Hess, M. Jacquart' 2008-Oct-14 20:17:24 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081014' 2008-Oct-14 20:17:25 LOG2 log_preferences: Currently applied preferences: 2008-Oct-14 20:17:25 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-14 20:17:25 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-14 20:17:25 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-14 20:17:25 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-14 20:17:25 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-14 20:17:25 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-14 20:17:25 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-14 20:17:25 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-14 20:17:25 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-14 20:17:25 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-14 20:17:25 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-14 20:17:25 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-14 20:17:25 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-14 20:17:25 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-14 20:17:25 ALERT executive: CIMA executive ready 2008-Oct-14 20:17:28 NOTE frontend: CIMA frontend ready 2008-Oct-14 20:17:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:17:28 LOG4 got_cormsg: From DATATAKING: setup 2008-Oct-14 20:17:29 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:17:29.301 (seconds: 73049.301)!} 2008-Oct-14 20:17:29 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:17:29.301 (seconds: 73049.301)! 2008-Oct-14 20:17:35 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-14 20:17:35 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-14 20:17:35 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-14 20:17:35 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-14 20:17:35 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-14 20:17:35 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-14 20:17:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-14 20:17:35 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-14 20:17:35 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-14 20:17:35 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-14 20:17:35 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-14 20:17:35 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-14 20:17:35 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-14 20:17:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-14 20:17:35 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-14 20:17:35 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Oct-14 20:17:36 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-14 20:17:36 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:17:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:17:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:17:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:17:49 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-14 20:17:49 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-14 20:17:49 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-14 20:17:49 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-14 20:17:49 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-14 20:17:49 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-14 20:17:49 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-14 20:17:50 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-14 20:17:50 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-14 20:17:50 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-14 20:17:53 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-14 20:17:53 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-14 20:17:53 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-14 20:17:53 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-14 20:18:52 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-14 20:19:44 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-14 20:19:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-14 20:19:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-14 20:19:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-14 20:19:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-14 20:19:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-14 20:19:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-14 20:19:44 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-14 20:19:44 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-14 20:19:44 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-14 20:19:44 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-14 20:19:44 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-14 20:19:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-14 20:19:44 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-14 20:19:44 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-14 20:19:44 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-14 20:19:45 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-14 20:19:45 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-14 20:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-14 20:19:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-14 20:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-14 20:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-14 20:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-14 20:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-14 20:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-14 20:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-14 20:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-14 20:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-14 20:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-14 20:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-14 20:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-14 20:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-14 20:19:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-14 20:19:47 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-14 20:19:47 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-14 20:19:47 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-14 20:19:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-14 20:19:47 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-14 20:19:47 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-14 20:19:47 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Oct-14 20:19:47 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-14 20:19:47 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-14 20:19:47 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-14 20:19:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-14 20:19:47 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-14 20:19:47 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-14 20:19:47 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-14 20:19:47 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-14 20:19:47 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-14 20:19:47 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-14 20:19:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 20:19:47 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-14 20:19:47 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-14 20:19:47 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-14 20:19:47 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-14 20:19:47 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-14 20:19:47 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-14 20:19:47 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-14 20:19:47 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-14 20:19:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 20:19:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 20:19:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 20:19:47 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-14 20:19:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 20:19:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 20:19:47 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-14 20:19:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 20:19:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 20:19:47 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-14 20:19:47 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-14 20:19:47 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-14 20:19:47 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-14 20:19:47 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-14 20:19:47 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-14 20:19:47 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-14 20:19:48 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-14 20:19:48 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-14 20:19:48 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-14 20:19:48 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-14 20:19:48 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-14 20:19:48 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-14 20:19:48 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-14 20:19:48 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-14 20:19:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-14 20:19:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:19:48 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-14 20:19:48 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-14 20:19:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:19:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:19:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 20:20:03 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-14 20:20:03 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-14 20:20:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-14 20:20:03 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-14 20:20:03 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-14 20:20:03 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-14 20:20:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-14 20:20:03 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-14 20:20:03 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-14 20:20:04 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-14 20:20:04 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-14 20:20:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-14 20:20:04 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-14 20:20:04 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-14 20:20:04 START begin_task: Starting task 'selecting calibration port' 2008-Oct-14 20:20:04 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-14 20:20:04 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-14 20:20:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-14 20:20:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:20:04 START begin_task: Starting task 'waiting on calport' 2008-Oct-14 20:20:04 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-14 20:20:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:04 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-14 20:20:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:20:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:04 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 20:20:04 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-14 20:20:04 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-14 20:20:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-14 20:20:04 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-14 20:20:04 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-14 20:20:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 20:20:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 20:20:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 20:20:04 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-14 20:20:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 20:20:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 20:20:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 20:20:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 20:20:04 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-14 20:20:04 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-14 20:20:04 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-14 20:20:04 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-14 20:20:04 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-14 20:20:04 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-14 20:20:04 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-14 20:20:04 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-14 20:20:04 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-14 20:20:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:20:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:20:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:20:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:20:04 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-14 20:20:04 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-14 20:20:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 20:20:04 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-14 20:20:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 20:20:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 20:20:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 20:20:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 20:20:04 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-14 20:20:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:20:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:20:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:20:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:20:05 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-14 20:20:05 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-14 20:20:05 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-14 20:20:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-14 20:20:05 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-14 20:20:05 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-14 20:20:05 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-14 20:20:05 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-14 20:20:05 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-14 20:20:05 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-14 20:20:05 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-14 20:20:05 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-14 20:20:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-14 20:20:06 LOG3 track_source: Calling 'track_source galfasrc 212830.0 +084536 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-14 20:20:06 START begin_task: Starting task 'sending tracking commands' 2008-Oct-14 20:20:06 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-14 20:20:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-14 20:20:06 INFO1 track_source: Starting to track galfasrc 2008-Oct-14 20:20:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-14 20:20:06 LOG3 vw_send: To DATATAKING: set ra 212830.0 2008-Oct-14 20:20:06 LOG3 vw_send: To DATATAKING: set dec +084536 2008-Oct-14 20:20:06 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-14 20:20:06 LOG3 vw_send: To DATATAKING: pnt tr 212830.0 +084536 -CJ 2008-Oct-14 20:20:06 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-14 20:20:06 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-14 20:20:06 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-14 20:20:06 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-14 20:20:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 20:20:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-14 20:20:06 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-14 20:20:06 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-14 20:20:06 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-14 20:20:06 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-14 20:20:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-14 20:20:06 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-14 20:20:06 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-14 20:20:06 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-14 20:20:06 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-14 20:20:06 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-14 20:20:06 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-14 20:20:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-14 20:20:06 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-14 20:20:06 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-14 20:20:06 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-14 20:20:06 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-14 20:20:06 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-14 20:20:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 20:20:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0014.fits 2008-Oct-14 20:20:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-14 20:20:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-14 20:20:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-14 20:20:06 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081014.a2010.0014.fits} 2008-Oct-14 20:20:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:06 LOG4 got_cormsg: From DATATAKING: set ra 212830.0 2008-Oct-14 20:20:06 LOG4 got_cormsg: From DATATAKING: set dec +084536 2008-Oct-14 20:20:06 LOG4 got_cormsg: From DATATAKING: 212830.0 2008-Oct-14 20:20:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:06 LOG4 got_cormsg: From DATATAKING: +084536 2008-Oct-14 20:20:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-14 20:20:06 LOG4 got_cormsg: From DATATAKING: pnt tr 212830.0 +084536 -CJ 2008-Oct-14 20:20:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-14 20:20:07 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-14 20:20:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 20:20:18 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-14 20:20:18 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-14 20:20:18 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-14 20:20:18 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-14 20:20:18 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-14 20:20:18 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-14 20:20:18 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-14 20:20:18 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-14 20:20:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-14 20:20:18 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-14 20:20:18 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-14 20:20:18 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-14 20:20:18 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-14 20:20:18 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-14 20:20:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-14 20:20:18 LOG3 waittrk: Start waittrk 5 2008-Oct-14 20:20:18 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-14 20:20:18 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-14 20:20:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-14 20:20:23 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-14 20:20:23 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-14 20:20:23 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-14 20:20:29 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-14 20:20:29 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-14 20:20:29 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-14 20:20:29 INFO2 waittrk: Now tracking galfasrc 2008-Oct-14 20:20:29 LOG4 waittrk: Current telescope position: Az = 359.86 ZA = 9.52 2008-Oct-14 20:20:29 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-14 20:20:29 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-14 20:20:29 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-14 20:20:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-14 20:20:29 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-14 20:20:29 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-14 20:20:29 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-14 20:20:29 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-14 20:20:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-14 20:20:30 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-14 20:20:30 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-14 20:20:30 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-14 20:20:30 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-14 20:20:31 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-14 20:20:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-14 20:20:31 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 20:20:31 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-14 20:20:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 20:20:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 20:20:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:20:31 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 20:20:31 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-14 20:20:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 20:20:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:20:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 20:20:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 20:20:31 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-14 20:20:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 20:20:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 20:20:31 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 20:20:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 20:20:31 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-14 20:20:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 20:20:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 20:20:31 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-14 20:20:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 20:20:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 20:20:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 20:20:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 20:20:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 20:20:31 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-14 20:20:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 20:20:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 20:20:31 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-14 20:20:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 20:20:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 20:20:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 20:20:31 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-14 20:20:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:20:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:20:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:20:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:20:31 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081014.a2010.0014.fits' is empty! 2008-Oct-14 20:20:31 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-14 20:20:31 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-14 20:20:31 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 20:20:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 20:20:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 20:20:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 20:20:31 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-14 20:20:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 20:20:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 20:20:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 20:20:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 20:20:31 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-14 20:20:31 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-14 20:20:31 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-14 20:20:31 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-14 20:20:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-14 20:20:31 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-14 20:20:32 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-14 20:20:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-14 20:20:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:20:32 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-14 20:20:32 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-14 20:20:32 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-14 20:20:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:20:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 20:20:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:34 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 20:20:34 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-14 20:20:34 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-14 20:20:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-14 20:20:34 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-14 20:20:34 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-14 20:20:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-14 20:20:35 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-14 20:20:35 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-14 20:20:35 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-14 20:20:35 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-14 20:20:35 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-14 20:20:35 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-14 20:20:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-14 20:20:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:35 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 6 6 dB 2008-Oct-14 20:20:35 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 3 dB 2008-Oct-14 20:20:35 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 5 dB 2008-Oct-14 20:20:35 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2008-Oct-14 20:20:35 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-14 20:20:35 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-14 20:20:35 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-14 20:20:35 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.888 1.039 ALFA beam 1: 0.991 1.001 2008-Oct-14 20:20:35 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.097 1.080 ALFA beam 3: 0.950 0.921 2008-Oct-14 20:20:35 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.915 1.095 ALFA beam 5: 1.017 0.943 2008-Oct-14 20:20:35 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.029 1.049 ALFA beam 7: 0.914 0.933 2008-Oct-14 20:20:35 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-14 20:20:35 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-14 20:20:35 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-14 20:20:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 20:20:35 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-14 20:20:35 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-14 20:20:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 20:20:35 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-14 20:20:35 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-14 20:20:35 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-14 20:20:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 20:20:35 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-14 20:20:35 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-14 20:20:35 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-14 20:20:35 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-14 20:20:35 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-14 20:20:35 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:20:35 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79082 J 2008-Oct-14 20:20:36 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:20:36 LOG2 antvel: Parameters to Doppler: Topocentric 87635 2008 288 0.0 2008-Oct-14 20:20:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:20:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-14 20:20:36 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-14 20:20:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:20:36 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:20:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-14 20:20:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:20:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:20:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:20:36 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-14 20:20:36 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.486715 2008.7908217038052 18.999933 2008-Oct-14 20:20:36 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000239 8.759999999999998 2008-Oct-14 20:20:36 LOG4 log_alfabeam: ALFABEAM 1 21.473887511611643 8.864846429027049 2008-Oct-14 20:20:36 LOG4 log_alfabeam: ALFABEAM 2 21.469208212435504 8.795730213656675 2008-Oct-14 20:20:36 LOG4 log_alfabeam: ALFABEAM 3 21.470279745875580 8.690769558056806 2008-Oct-14 20:20:36 LOG4 log_alfabeam: ALFABEAM 4 21.476137412912156 8.655181600916908 2008-Oct-14 20:20:36 LOG4 log_alfabeam: ALFABEAM 5 21.480833042221029 8.725019690509274 2008-Oct-14 20:20:36 LOG4 log_alfabeam: ALFABEAM 6 21.479654725739543 8.829718139667580 2008-Oct-14 20:20:36 INFO2 take_data: Starting WAPP+GALFA scan: 828800242 2008-Oct-14 20:20:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:20:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:20:36 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-14 20:20:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:20:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-14 20:20:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:20:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1237.00 2008-Oct-14 20:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:20:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:20:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:20:47 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-14 20:20:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:20:47 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-14 20:20:47 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-14 20:20:47 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-14 20:20:47 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-14 20:20:47 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:20:47 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79082 J 2008-Oct-14 20:20:47 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:20:47 LOG2 antvel: Parameters to Doppler: Topocentric 87646 2008 288 0.0 2008-Oct-14 20:20:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:20:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-14 20:20:47 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-14 20:20:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:20:47 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:20:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-14 20:20:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:20:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:20:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:20:47 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-14 20:20:47 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.489779 2008.7908220523741 18.999933 2008-Oct-14 20:20:47 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000293 8.759999999999996 2008-Oct-14 20:20:47 LOG4 log_alfabeam: ALFABEAM 1 21.473919965926008 8.864920962580467 2008-Oct-14 20:20:47 LOG4 log_alfabeam: ALFABEAM 2 21.469219323496198 8.796123599272498 2008-Oct-14 20:20:47 LOG4 log_alfabeam: ALFABEAM 3 21.470258382570314 8.691091200318551 2008-Oct-14 20:20:47 LOG4 log_alfabeam: ALFABEAM 4 21.476104983960912 8.655105370674759 2008-Oct-14 20:20:47 LOG4 log_alfabeam: ALFABEAM 5 21.480822156780853 8.724623458667294 2008-Oct-14 20:20:47 LOG4 log_alfabeam: ALFABEAM 6 21.479676247514593 8.829400925205134 2008-Oct-14 20:20:47 INFO2 take_data: Starting WAPP+GALFA scan: 828800243 2008-Oct-14 20:20:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:20:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:20:48 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-14 20:20:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:20:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-14 20:20:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:20:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:20:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1249.00 2008-Oct-14 20:20:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:20:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:20:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:20:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:20:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:20:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:20:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:20:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:20:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:20:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:20:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:20:59 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-14 20:20:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:20:59 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-14 20:20:59 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-14 20:20:59 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-14 20:20:59 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-14 20:20:59 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:20:59 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79082 J 2008-Oct-14 20:20:59 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:20:59 LOG2 antvel: Parameters to Doppler: Topocentric 87659 2008 288 0.0 2008-Oct-14 20:20:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:20:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-14 20:20:59 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-14 20:20:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:20:59 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:20:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-14 20:20:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:20:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:20:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:20:59 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-14 20:20:59 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.493400 2008.7908224643193 18.999933 2008-Oct-14 20:20:59 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000083 8.760000000000005 2008-Oct-14 20:20:59 LOG4 log_alfabeam: ALFABEAM 1 21.473958344239104 8.865006189093346 2008-Oct-14 20:20:59 LOG4 log_alfabeam: ALFABEAM 2 21.469232608918649 8.796587450352245 2008-Oct-14 20:20:59 LOG4 log_alfabeam: ALFABEAM 3 21.470233268215097 8.691473126553714 2008-Oct-14 20:20:59 LOG4 log_alfabeam: ALFABEAM 4 21.476066634258512 8.655018136464898 2008-Oct-14 20:20:59 LOG4 log_alfabeam: ALFABEAM 5 21.480809135670281 8.724156202939945 2008-Oct-14 20:20:59 LOG4 log_alfabeam: ALFABEAM 6 21.479701552637973 8.829024202228400 2008-Oct-14 20:20:59 INFO2 take_data: Starting WAPP+GALFA scan: 828800244 2008-Oct-14 20:21:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:21:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:21:00 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-14 20:21:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:21:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-14 20:21:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:21:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:21:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:21:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1261.00 2008-Oct-14 20:21:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:21:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:21:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:21:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:21:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:21:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:21:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:21:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:21:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:21:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:21:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:21:11 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-14 20:21:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:21:11 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-14 20:21:11 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-14 20:21:11 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-14 20:21:11 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-14 20:21:11 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:21:11 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79082 J 2008-Oct-14 20:21:11 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:21:11 LOG2 antvel: Parameters to Doppler: Topocentric 87671 2008 288 0.0 2008-Oct-14 20:21:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:21:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-14 20:21:11 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-14 20:21:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:21:11 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:21:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-14 20:21:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:21:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:21:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:21:11 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-14 20:21:11 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.496743 2008.7908228445763 18.999933 2008-Oct-14 20:21:11 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000065 8.760000000000000 2008-Oct-14 20:21:11 LOG4 log_alfabeam: ALFABEAM 1 21.473993796449005 8.865082120178602 2008-Oct-14 20:21:11 LOG4 log_alfabeam: ALFABEAM 2 21.469245021879480 8.797014647944790 2008-Oct-14 20:21:11 LOG4 log_alfabeam: ALFABEAM 3 21.470210211299534 8.691827444825137 2008-Oct-14 20:21:11 LOG4 log_alfabeam: ALFABEAM 4 21.476031207148367 8.654940349655609 2008-Oct-14 20:21:11 LOG4 log_alfabeam: ALFABEAM 5 21.480796964458328 8.723725823179679 2008-Oct-14 20:21:11 LOG4 log_alfabeam: ALFABEAM 6 21.479724789017205 8.828674658626941 2008-Oct-14 20:21:11 INFO2 take_data: Starting WAPP+GALFA scan: 828800245 2008-Oct-14 20:21:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:21:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:21:12 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-14 20:21:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:21:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-14 20:21:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:21:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:21:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:21:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1273.00 2008-Oct-14 20:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:21:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:21:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:21:23 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-14 20:21:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:21:23 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-14 20:21:23 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-14 20:21:23 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-14 20:21:23 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-14 20:21:23 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:21:23 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79082 J 2008-Oct-14 20:21:23 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:21:23 LOG2 antvel: Parameters to Doppler: Topocentric 87683 2008 288 0.0 2008-Oct-14 20:21:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:21:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-14 20:21:23 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-14 20:21:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:21:23 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:21:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-14 20:21:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:21:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:21:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:21:23 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-14 20:21:23 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.500085 2008.7908232248335 18.999933 2008-Oct-14 20:21:23 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000090 8.760000000000000 2008-Oct-14 20:21:23 LOG4 log_alfabeam: ALFABEAM 1 21.474029254750914 8.865155383031885 2008-Oct-14 20:21:23 LOG4 log_alfabeam: ALFABEAM 2 21.469257571602387 8.797440684745721 2008-Oct-14 20:21:23 LOG4 log_alfabeam: ALFABEAM 3 21.470187287124723 8.692183272563936 2008-Oct-14 20:21:23 LOG4 log_alfabeam: ALFABEAM 4 21.475995772674221 8.654865229854948 2008-Oct-14 20:21:23 LOG4 log_alfabeam: ALFABEAM 5 21.480784654194576 8.723296568359492 2008-Oct-14 20:21:23 LOG4 log_alfabeam: ALFABEAM 6 21.479747895777006 8.828323575438748 2008-Oct-14 20:21:23 INFO2 take_data: Starting WAPP+GALFA scan: 828800246 2008-Oct-14 20:21:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:21:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:21:24 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-14 20:21:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:21:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-14 20:21:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:21:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:21:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:21:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1285.00 2008-Oct-14 20:21:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:21:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:21:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:21:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:21:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:21:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:21:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:21:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:21:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:21:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:21:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:21:35 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-14 20:21:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:21:35 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-14 20:21:35 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-14 20:21:35 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-14 20:21:35 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-14 20:21:35 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:21:35 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79082 J 2008-Oct-14 20:21:35 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:21:35 LOG2 antvel: Parameters to Doppler: Topocentric 87695 2008 288 0.0 2008-Oct-14 20:21:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:21:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-14 20:21:35 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-14 20:21:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:21:35 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:21:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-14 20:21:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:21:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:21:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:21:35 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-14 20:21:35 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.503427 2008.7908236050905 18.999933 2008-Oct-14 20:21:35 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000065 8.760000000000000 2008-Oct-14 20:21:35 LOG4 log_alfabeam: ALFABEAM 1 21.474064726972870 8.865225997165572 2008-Oct-14 20:21:35 LOG4 log_alfabeam: ALFABEAM 2 21.469270260685200 8.797865656459718 2008-Oct-14 20:21:35 LOG4 log_alfabeam: ALFABEAM 3 21.470164490454067 8.692540686392819 2008-Oct-14 20:21:35 LOG4 log_alfabeam: ALFABEAM 4 21.475960323011893 8.654792757288753 2008-Oct-14 20:21:35 LOG4 log_alfabeam: ALFABEAM 5 21.480772202318136 8.722868342361291 2008-Oct-14 20:21:35 LOG4 log_alfabeam: ALFABEAM 6 21.479770878175152 8.827970876749795 2008-Oct-14 20:21:35 INFO2 take_data: Starting WAPP+GALFA scan: 828800247 2008-Oct-14 20:21:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:21:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:21:36 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-14 20:21:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:21:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-14 20:21:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:21:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:21:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:21:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1297.00 2008-Oct-14 20:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:21:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:21:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:21:47 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-14 20:21:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:21:47 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-14 20:21:47 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-14 20:21:47 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-14 20:21:47 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-14 20:21:47 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:21:47 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79082 J 2008-Oct-14 20:21:47 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:21:47 LOG2 antvel: Parameters to Doppler: Topocentric 87707 2008 288 0.0 2008-Oct-14 20:21:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:21:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-14 20:21:47 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-14 20:21:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:21:47 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:21:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-14 20:21:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:21:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:21:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:21:47 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-14 20:21:47 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.506770 2008.7908239853475 18.999933 2008-Oct-14 20:21:47 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000094 8.760000000000000 2008-Oct-14 20:21:47 LOG4 log_alfabeam: ALFABEAM 1 21.474100220960352 8.865293979549635 2008-Oct-14 20:21:47 LOG4 log_alfabeam: ALFABEAM 2 21.469283091860976 8.798289657795427 2008-Oct-14 20:21:47 LOG4 log_alfabeam: ALFABEAM 3 21.470141816174134 8.692899764483597 2008-Oct-14 20:21:47 LOG4 log_alfabeam: ALFABEAM 4 21.475924850321309 8.654722914723598 2008-Oct-14 20:21:47 LOG4 log_alfabeam: ALFABEAM 5 21.480759606130604 8.722441050030318 2008-Oct-14 20:21:47 LOG4 log_alfabeam: ALFABEAM 6 21.479793741351187 8.827616485071697 2008-Oct-14 20:21:47 INFO2 take_data: Starting WAPP+GALFA scan: 828800248 2008-Oct-14 20:21:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:21:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:21:48 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-14 20:21:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:21:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-14 20:21:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:21:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:21:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:21:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1309.00 2008-Oct-14 20:21:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:21:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:21:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:21:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:21:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:21:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:21:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:21:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:21:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:21:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:21:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:21:59 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-14 20:21:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:21:59 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-14 20:21:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-14 20:21:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 20:21:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 20:21:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 20:21:59 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-14 20:21:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 20:21:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 20:21:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 20:21:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 20:21:59 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-14 20:21:59 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-14 20:21:59 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-14 20:21:59 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-14 20:21:59 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:21:59 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79082 J 2008-Oct-14 20:21:59 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:21:59 LOG2 antvel: Parameters to Doppler: Topocentric 87719 2008 288 0.0 2008-Oct-14 20:21:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:21:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-14 20:21:59 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-14 20:21:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:21:59 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:21:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-14 20:21:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:21:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:21:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:21:59 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-14 20:21:59 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.510112 2008.7908243656045 18.999933 2008-Oct-14 20:21:59 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000072 8.760000000000005 2008-Oct-14 20:21:59 LOG4 log_alfabeam: ALFABEAM 1 21.474135712703102 8.865359287171209 2008-Oct-14 20:21:59 LOG4 log_alfabeam: ALFABEAM 2 21.469296056295473 8.798712403414026 2008-Oct-14 20:21:59 LOG4 log_alfabeam: ALFABEAM 3 21.470119279466314 8.693260262197885 2008-Oct-14 20:21:59 LOG4 log_alfabeam: ALFABEAM 4 21.475889378597124 8.654655746578484 2008-Oct-14 20:21:59 LOG4 log_alfabeam: ALFABEAM 5 21.480746874291032 8.722014979228407 2008-Oct-14 20:21:59 LOG4 log_alfabeam: ALFABEAM 6 21.479816469977447 8.827260641535357 2008-Oct-14 20:21:59 INFO2 take_data: Starting WAPP+GALFA scan: 828800249 2008-Oct-14 20:22:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:22:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:22:00 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-14 20:22:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:22:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-14 20:22:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:22:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:22:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:22:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1321.00 2008-Oct-14 20:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:22:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:22:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:22:11 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-14 20:22:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:22:11 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-14 20:22:11 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-14 20:22:11 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-14 20:22:11 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-14 20:22:11 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:22:11 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79082 J 2008-Oct-14 20:22:11 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:22:11 LOG2 antvel: Parameters to Doppler: Topocentric 87731 2008 288 0.0 2008-Oct-14 20:22:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:22:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-14 20:22:11 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-14 20:22:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:22:11 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:22:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-14 20:22:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:22:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:22:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:22:11 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-14 20:22:11 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.513455 2008.7908247458615 18.999933 2008-Oct-14 20:22:11 LOG4 log_alfabeam: ALFABEAM 0 21.474999999999984 8.760000000000000 2008-Oct-14 20:22:11 LOG4 log_alfabeam: ALFABEAM 1 21.474171220666392 8.865421957398913 2008-Oct-14 20:22:11 LOG4 log_alfabeam: ALFABEAM 2 21.469309160558243 8.799134114921493 2008-Oct-14 20:22:11 LOG4 log_alfabeam: ALFABEAM 3 21.470096868428687 8.693622365121890 2008-Oct-14 20:22:11 LOG4 log_alfabeam: ALFABEAM 4 21.475853889384680 8.654591214664393 2008-Oct-14 20:22:11 LOG4 log_alfabeam: ALFABEAM 5 21.480734000335286 8.721589906924006 2008-Oct-14 20:22:11 LOG4 log_alfabeam: ALFABEAM 6 21.479839076036811 8.826903162646417 2008-Oct-14 20:22:11 INFO2 take_data: Starting WAPP+GALFA scan: 828800250 2008-Oct-14 20:22:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:22:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:22:12 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-14 20:22:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:22:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-14 20:22:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:22:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:22:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:22:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1333.00 2008-Oct-14 20:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:22:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:22:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:22:23 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-14 20:22:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:22:23 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-14 20:22:23 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-14 20:22:23 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-14 20:22:23 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-14 20:22:23 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:22:23 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:22:23 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:22:23 LOG2 antvel: Parameters to Doppler: Topocentric 87743 2008 288 0.0 2008-Oct-14 20:22:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:22:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-14 20:22:23 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-14 20:22:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:22:23 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:22:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-14 20:22:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:22:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:22:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:22:23 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-14 20:22:23 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.516797 2008.7908251261188 18.999933 2008-Oct-14 20:22:23 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000051 8.759999999999998 2008-Oct-14 20:22:23 LOG4 log_alfabeam: ALFABEAM 1 21.474206720835546 8.865481951653067 2008-Oct-14 20:22:23 LOG4 log_alfabeam: ALFABEAM 2 21.469322395590854 8.799554508965716 2008-Oct-14 20:22:23 LOG4 log_alfabeam: ALFABEAM 3 21.470074598019856 8.693985826170145 2008-Oct-14 20:22:23 LOG4 log_alfabeam: ALFABEAM 4 21.475818406686418 8.654529358967631 2008-Oct-14 20:22:23 LOG4 log_alfabeam: ALFABEAM 5 21.480720993151547 8.721166119053933 2008-Oct-14 20:22:23 LOG4 log_alfabeam: ALFABEAM 6 21.479861544419503 8.826544292041909 2008-Oct-14 20:22:23 INFO2 take_data: Starting WAPP+GALFA scan: 828800251 2008-Oct-14 20:22:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:22:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:22:24 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-14 20:22:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:22:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-14 20:22:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:22:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:22:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:22:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1345.00 2008-Oct-14 20:22:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:22:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:22:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:22:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:22:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:22:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:22:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:22:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:22:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:22:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:22:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:22:35 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-14 20:22:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:22:35 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-14 20:22:35 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-14 20:22:35 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-14 20:22:35 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-14 20:22:35 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:22:35 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:22:35 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:22:35 LOG2 antvel: Parameters to Doppler: Topocentric 87755 2008 288 0.0 2008-Oct-14 20:22:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:22:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-14 20:22:35 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-14 20:22:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:22:35 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:22:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-14 20:22:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:22:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:22:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:22:35 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-14 20:22:35 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.520140 2008.7908255063758 18.999933 2008-Oct-14 20:22:35 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000033 8.760000000000003 2008-Oct-14 20:22:35 LOG4 log_alfabeam: ALFABEAM 1 21.474242231686294 8.865539305376480 2008-Oct-14 20:22:35 LOG4 log_alfabeam: ALFABEAM 2 21.469335768064145 8.799973806385390 2008-Oct-14 20:22:35 LOG4 log_alfabeam: ALFABEAM 3 21.470052456429748 8.694350832089583 2008-Oct-14 20:22:35 LOG4 log_alfabeam: ALFABEAM 4 21.475782912036241 8.654470143223723 2008-Oct-14 20:22:35 LOG4 log_alfabeam: ALFABEAM 5 21.480707846172511 8.720743393332093 2008-Oct-14 20:22:35 LOG4 log_alfabeam: ALFABEAM 6 21.479883887018239 8.826183845050917 2008-Oct-14 20:22:35 INFO2 take_data: Starting WAPP+GALFA scan: 828800252 2008-Oct-14 20:22:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:22:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:22:36 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-14 20:22:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:22:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-14 20:22:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:22:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:22:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:22:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1357.00 2008-Oct-14 20:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:22:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:22:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:22:47 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-14 20:22:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:22:47 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-14 20:22:47 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-14 20:22:47 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-14 20:22:47 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-14 20:22:47 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:22:47 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:22:47 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:22:47 LOG2 antvel: Parameters to Doppler: Topocentric 87767 2008 288 0.0 2008-Oct-14 20:22:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:22:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-14 20:22:47 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-14 20:22:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:22:47 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:22:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-14 20:22:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:22:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:22:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:22:47 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-14 20:22:47 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.523482 2008.7908258866328 18.999933 2008-Oct-14 20:22:47 LOG4 log_alfabeam: ALFABEAM 0 21.474999999999984 8.759999999999998 2008-Oct-14 20:22:47 LOG4 log_alfabeam: ALFABEAM 1 21.474277729210012 8.865593984421002 2008-Oct-14 20:22:47 LOG4 log_alfabeam: ALFABEAM 2 21.469349268700100 8.800391725934633 2008-Oct-14 20:22:47 LOG4 log_alfabeam: ALFABEAM 3 21.470030458387797 8.694717133470864 2008-Oct-14 20:22:47 LOG4 log_alfabeam: ALFABEAM 4 21.475747429432698 8.654413602986399 2008-Oct-14 20:22:47 LOG4 log_alfabeam: ALFABEAM 5 21.480694568510437 8.720322013647912 2008-Oct-14 20:22:47 LOG4 log_alfabeam: ALFABEAM 6 21.479906088946972 8.825822067696148 2008-Oct-14 20:22:47 INFO2 take_data: Starting WAPP+GALFA scan: 828800253 2008-Oct-14 20:22:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:22:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:22:48 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-14 20:22:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:22:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-14 20:22:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:22:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:22:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:22:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1369.00 2008-Oct-14 20:22:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:22:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:22:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:22:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:22:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:22:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:22:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:22:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:22:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:22:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:22:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:22:59 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-14 20:22:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:22:59 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-14 20:22:59 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-14 20:22:59 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-14 20:22:59 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-14 20:22:59 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:22:59 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:22:59 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:22:59 LOG2 antvel: Parameters to Doppler: Topocentric 87779 2008 288 0.0 2008-Oct-14 20:22:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:22:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-14 20:22:59 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-14 20:22:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:22:59 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:22:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-14 20:22:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:22:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:22:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:22:59 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-14 20:22:59 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.526825 2008.7908262668898 18.999933 2008-Oct-14 20:22:59 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000044 8.760000000000003 2008-Oct-14 20:22:59 LOG4 log_alfabeam: ALFABEAM 1 21.474313231890918 8.865646022296785 2008-Oct-14 20:22:59 LOG4 log_alfabeam: ALFABEAM 2 21.469362904270859 8.800808487655516 2008-Oct-14 20:22:59 LOG4 log_alfabeam: ALFABEAM 3 21.470008592177955 8.695084918199134 2008-Oct-14 20:22:59 LOG4 log_alfabeam: ALFABEAM 4 21.475711940400956 8.654359703922664 2008-Oct-14 20:22:59 LOG4 log_alfabeam: ALFABEAM 5 21.480681153496025 8.719901758490225 2008-Oct-14 20:22:59 LOG4 log_alfabeam: ALFABEAM 6 21.479928162006743 8.825458774152379 2008-Oct-14 20:22:59 INFO2 take_data: Starting WAPP+GALFA scan: 828800254 2008-Oct-14 20:23:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:23:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:23:00 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-14 20:23:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:23:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-14 20:23:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:23:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:23:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:23:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1381.00 2008-Oct-14 20:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:23:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:23:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:23:11 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-14 20:23:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:23:11 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-14 20:23:11 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-14 20:23:11 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-14 20:23:11 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-14 20:23:11 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:23:11 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:23:11 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:23:11 LOG2 antvel: Parameters to Doppler: Topocentric 87791 2008 288 0.0 2008-Oct-14 20:23:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:23:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-14 20:23:11 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-14 20:23:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:23:11 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:23:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-14 20:23:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:23:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:23:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:23:11 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-14 20:23:11 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.530167 2008.7908266471468 18.999933 2008-Oct-14 20:23:11 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000072 8.760000000000005 2008-Oct-14 20:23:11 LOG4 log_alfabeam: ALFABEAM 1 21.474348715737129 8.865695389279553 2008-Oct-14 20:23:11 LOG4 log_alfabeam: ALFABEAM 2 21.469376665284180 8.801223812524578 2008-Oct-14 20:23:11 LOG4 log_alfabeam: ALFABEAM 3 21.469986872294786 8.695453934667139 2008-Oct-14 20:23:11 LOG4 log_alfabeam: ALFABEAM 4 21.475676468924867 8.654308477160278 2008-Oct-14 20:23:11 LOG4 log_alfabeam: ALFABEAM 5 21.480667610460127 8.719482909582290 2008-Oct-14 20:23:11 LOG4 log_alfabeam: ALFABEAM 6 21.479950091541134 8.825094212704917 2008-Oct-14 20:23:11 INFO2 take_data: Starting WAPP+GALFA scan: 828800255 2008-Oct-14 20:23:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:23:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:23:12 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-14 20:23:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:23:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-14 20:23:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:23:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:23:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:23:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1393.00 2008-Oct-14 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:23:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:23:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:23:23 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-14 20:23:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:23:23 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-14 20:23:23 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Oct-14 20:23:23 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-14 20:23:23 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 20:23:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 20:23:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 20:23:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 20:23:23 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-14 20:23:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 20:23:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 20:23:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 20:23:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 20:23:23 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-14 20:23:23 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-14 20:23:23 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-14 20:23:23 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-14 20:23:23 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-14 20:23:23 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:23:23 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:23:23 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:23:23 LOG2 antvel: Parameters to Doppler: Topocentric 87803 2008 288 0.0 2008-Oct-14 20:23:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:23:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-14 20:23:23 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-14 20:23:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:23:23 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:23:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-14 20:23:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:23:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:23:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:23:24 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-14 20:23:24 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.533510 2008.790827027404 18.999933 2008-Oct-14 20:23:24 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000016 8.760000000000000 2008-Oct-14 20:23:24 LOG4 log_alfabeam: ALFABEAM 1 21.474384199238454 8.865742116939641 2008-Oct-14 20:23:24 LOG4 log_alfabeam: ALFABEAM 2 21.469390558612151 8.801637919757624 2008-Oct-14 20:23:24 LOG4 log_alfabeam: ALFABEAM 3 21.469965287117560 8.695824371875480 2008-Oct-14 20:23:24 LOG4 log_alfabeam: ALFABEAM 4 21.475640996522753 8.654259890304846 2008-Oct-14 20:23:24 LOG4 log_alfabeam: ALFABEAM 5 21.480653932631949 8.719065246217504 2008-Oct-14 20:23:24 LOG4 log_alfabeam: ALFABEAM 6 21.479971889257129 8.824728196396576 2008-Oct-14 20:23:24 INFO2 take_data: Starting WAPP+GALFA scan: 828800256 2008-Oct-14 20:23:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:23:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:23:24 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-14 20:23:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:23:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-14 20:23:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:23:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:23:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:23:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1405.00 2008-Oct-14 20:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:23:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:23:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:23:35 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-14 20:23:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:23:35 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-14 20:23:35 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-14 20:23:35 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-14 20:23:35 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-14 20:23:35 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:23:35 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:23:35 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:23:35 LOG2 antvel: Parameters to Doppler: Topocentric 87815 2008 288 0.0 2008-Oct-14 20:23:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:23:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-14 20:23:35 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-14 20:23:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:23:35 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:23:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-14 20:23:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:23:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:23:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:23:35 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-14 20:23:35 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.536852 2008.790827407661 18.999933 2008-Oct-14 20:23:35 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000055 8.760000000000003 2008-Oct-14 20:23:35 LOG4 log_alfabeam: ALFABEAM 1 21.474419658431056 8.865786179962765 2008-Oct-14 20:23:35 LOG4 log_alfabeam: ALFABEAM 2 21.469404574554151 8.802050532665820 2008-Oct-14 20:23:35 LOG4 log_alfabeam: ALFABEAM 3 21.469943850901231 8.696195976147278 2008-Oct-14 20:23:35 LOG4 log_alfabeam: ALFABEAM 4 21.475605547153279 8.654213970070698 2008-Oct-14 20:23:35 LOG4 log_alfabeam: ALFABEAM 5 21.480640129555589 8.718649047837886 2008-Oct-14 20:23:35 LOG4 log_alfabeam: ALFABEAM 6 21.479993540733531 8.824360975649650 2008-Oct-14 20:23:35 INFO2 take_data: Starting WAPP+GALFA scan: 828800257 2008-Oct-14 20:23:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:23:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:23:36 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-14 20:23:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:23:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-14 20:23:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:23:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:23:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:23:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1417.00 2008-Oct-14 20:23:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:23:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:23:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:23:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:23:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:23:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:23:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:23:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:23:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:23:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:23:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:23:47 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-14 20:23:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:23:47 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-14 20:23:47 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-14 20:23:47 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-14 20:23:47 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-14 20:23:47 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:23:47 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:23:47 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:23:47 LOG2 antvel: Parameters to Doppler: Topocentric 87827 2008 288 0.0 2008-Oct-14 20:23:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:23:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-14 20:23:47 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-14 20:23:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:23:47 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:23:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-14 20:23:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:23:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:23:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:23:47 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-14 20:23:47 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.540195 2008.790827787918 18.999933 2008-Oct-14 20:23:47 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000033 8.760000000000003 2008-Oct-14 20:23:47 LOG4 log_alfabeam: ALFABEAM 1 21.474455111808151 8.865827607972266 2008-Oct-14 20:23:47 LOG4 log_alfabeam: ALFABEAM 2 21.469418720082029 8.802461869608683 2008-Oct-14 20:23:47 LOG4 log_alfabeam: ALFABEAM 3 21.469922552122362 8.696568937575508 2008-Oct-14 20:23:47 LOG4 log_alfabeam: ALFABEAM 4 21.475570102330671 8.654170686009422 2008-Oct-14 20:23:47 LOG4 log_alfabeam: ALFABEAM 5 21.480626194359495 8.718234094571519 2008-Oct-14 20:23:47 LOG4 log_alfabeam: ALFABEAM 6 21.480015057581983 8.823992362397631 2008-Oct-14 20:23:47 INFO2 take_data: Starting WAPP+GALFA scan: 828800258 2008-Oct-14 20:23:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:23:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:23:48 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-14 20:23:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:23:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-14 20:23:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:23:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:23:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:23:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1429.00 2008-Oct-14 20:23:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:23:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:23:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:23:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:23:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:23:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:23:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:23:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:23:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:23:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:23:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:23:59 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-14 20:23:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:23:59 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-14 20:23:59 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-14 20:23:59 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-14 20:23:59 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-14 20:23:59 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:23:59 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:23:59 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:23:59 LOG2 antvel: Parameters to Doppler: Topocentric 87839 2008 288 0.0 2008-Oct-14 20:23:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:23:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-14 20:23:59 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-14 20:23:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:23:59 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:23:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-14 20:23:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:23:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:23:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:23:59 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-14 20:23:59 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.543537 2008.790828168175 18.999933 2008-Oct-14 20:23:59 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000041 8.760000000000000 2008-Oct-14 20:23:59 LOG4 log_alfabeam: ALFABEAM 1 21.474490535444151 8.865866380043890 2008-Oct-14 20:23:59 LOG4 log_alfabeam: ALFABEAM 2 21.469432985292151 8.802871656340328 2008-Oct-14 20:23:59 LOG4 log_alfabeam: ALFABEAM 3 21.469901404791027 8.696943000544023 2008-Oct-14 20:23:59 LOG4 log_alfabeam: ALFABEAM 4 21.475534685977426 8.654130060440520 2008-Oct-14 20:23:59 LOG4 log_alfabeam: ALFABEAM 5 21.480612136795276 8.717820663468009 2008-Oct-14 20:23:59 LOG4 log_alfabeam: ALFABEAM 6 21.480036425620938 8.823622609072059 2008-Oct-14 20:23:59 INFO2 take_data: Starting WAPP+GALFA scan: 828800259 2008-Oct-14 20:24:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:24:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:24:00 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-14 20:24:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:24:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-14 20:24:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:24:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:24:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:24:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1441.00 2008-Oct-14 20:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:24:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:24:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:24:11 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-14 20:24:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:24:11 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-14 20:24:11 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-14 20:24:11 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-14 20:24:11 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-14 20:24:11 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:24:11 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:24:11 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:24:11 LOG2 antvel: Parameters to Doppler: Topocentric 87851 2008 288 0.0 2008-Oct-14 20:24:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:24:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-14 20:24:11 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-14 20:24:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:24:11 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:24:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-14 20:24:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:24:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:24:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:24:11 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-14 20:24:11 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.546879 2008.790828548432 18.999933 2008-Oct-14 20:24:11 LOG4 log_alfabeam: ALFABEAM 0 21.474999999999991 8.760000000000000 2008-Oct-14 20:24:11 LOG4 log_alfabeam: ALFABEAM 1 21.474525937243978 8.865902513429178 2008-Oct-14 20:24:11 LOG4 log_alfabeam: ALFABEAM 2 21.469447372932070 8.803279988371946 2008-Oct-14 20:24:11 LOG4 log_alfabeam: ALFABEAM 3 21.469880403744916 8.697318243760430 2008-Oct-14 20:24:11 LOG4 log_alfabeam: ALFABEAM 4 21.475499290193870 8.654092075840120 2008-Oct-14 20:24:11 LOG4 log_alfabeam: ALFABEAM 5 21.480597954153659 8.717408658585430 2008-Oct-14 20:24:11 LOG4 log_alfabeam: ALFABEAM 6 21.480057650035992 8.823251637701864 2008-Oct-14 20:24:11 INFO2 take_data: Starting WAPP+GALFA scan: 828800260 2008-Oct-14 20:24:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:24:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:24:12 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-14 20:24:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:24:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-14 20:24:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:24:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:24:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:24:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1453.00 2008-Oct-14 20:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:24:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:24:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:24:23 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-14 20:24:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:24:23 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-14 20:24:23 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-14 20:24:23 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-14 20:24:23 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-14 20:24:23 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:24:23 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:24:23 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:24:23 LOG2 antvel: Parameters to Doppler: Topocentric 87863 2008 288 0.0 2008-Oct-14 20:24:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:24:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-14 20:24:23 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-14 20:24:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:24:23 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:24:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-14 20:24:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:24:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:24:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:24:23 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-14 20:24:23 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.550222 2008.7908289286893 18.999933 2008-Oct-14 20:24:23 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000005 8.760000000000005 2008-Oct-14 20:24:23 LOG4 log_alfabeam: ALFABEAM 1 21.474561325099071 8.865936022820586 2008-Oct-14 20:24:23 LOG4 log_alfabeam: ALFABEAM 2 21.469461885871471 8.803686959889221 2008-Oct-14 20:24:23 LOG4 log_alfabeam: ALFABEAM 3 21.469859543959192 8.697694747164405 2008-Oct-14 20:24:23 LOG4 log_alfabeam: ALFABEAM 4 21.475463907092301 8.654056717244369 2008-Oct-14 20:24:23 LOG4 log_alfabeam: ALFABEAM 5 21.480583643600546 8.716997985279701 2008-Oct-14 20:24:23 LOG4 log_alfabeam: ALFABEAM 6 21.480078735877427 8.822879369052592 2008-Oct-14 20:24:23 INFO2 take_data: Starting WAPP+GALFA scan: 828800261 2008-Oct-14 20:24:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:24:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:24:24 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-14 20:24:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:24:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-14 20:24:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:24:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:24:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:24:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1465.00 2008-Oct-14 20:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:24:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:24:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:24:35 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-14 20:24:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:24:35 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-14 20:24:35 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-14 20:24:35 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-14 20:24:35 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-14 20:24:35 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:24:35 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:24:35 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:24:35 LOG2 antvel: Parameters to Doppler: Topocentric 87875 2008 288 0.0 2008-Oct-14 20:24:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:24:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-14 20:24:35 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-14 20:24:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:24:35 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:24:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-14 20:24:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:24:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-14 20:24:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:24:35 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-14 20:24:35 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.553564 2008.7908293089463 18.999933 2008-Oct-14 20:24:35 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000016 8.760000000000005 2008-Oct-14 20:24:35 LOG4 log_alfabeam: ALFABEAM 1 21.474596675160985 8.865966893828331 2008-Oct-14 20:24:35 LOG4 log_alfabeam: ALFABEAM 2 21.469476513914515 8.804092300504267 2008-Oct-14 20:24:35 LOG4 log_alfabeam: ALFABEAM 3 21.469838839069041 8.698072252478712 2008-Oct-14 20:24:35 LOG4 log_alfabeam: ALFABEAM 4 21.475428560521802 8.654024000428876 2008-Oct-14 20:24:35 LOG4 log_alfabeam: ALFABEAM 5 21.480569215187543 8.716588916812551 2008-Oct-14 20:24:35 LOG4 log_alfabeam: ALFABEAM 6 21.480099669331928 8.822506058326029 2008-Oct-14 20:24:35 INFO2 take_data: Starting WAPP+GALFA scan: 828800262 2008-Oct-14 20:24:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:24:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:24:36 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-14 20:24:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:24:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-14 20:24:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:24:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:24:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:24:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1477.00 2008-Oct-14 20:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:24:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:24:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:24:47 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-14 20:24:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:24:47 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-14 20:24:47 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-14 20:24:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 20:24:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 20:24:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 20:24:47 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-14 20:24:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 20:24:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 20:24:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 20:24:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 20:24:47 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-14 20:24:47 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-14 20:24:47 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-14 20:24:47 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-14 20:24:47 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:24:47 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:24:47 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:24:47 LOG2 antvel: Parameters to Doppler: Topocentric 87887 2008 288 0.0 2008-Oct-14 20:24:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:24:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-14 20:24:47 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-14 20:24:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:24:47 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:24:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-14 20:24:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:24:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:24:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:24:47 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-14 20:24:47 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.556907 2008.7908296892033 18.999933 2008-Oct-14 20:24:47 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000019 8.760000000000003 2008-Oct-14 20:24:47 LOG4 log_alfabeam: ALFABEAM 1 21.474632005921048 8.865995151176259 2008-Oct-14 20:24:47 LOG4 log_alfabeam: ALFABEAM 2 21.469491264278584 8.804496226301499 2008-Oct-14 20:24:47 LOG4 log_alfabeam: ALFABEAM 3 21.469818277801796 8.698450952424263 2008-Oct-14 20:24:47 LOG4 log_alfabeam: ALFABEAM 4 21.475393231996609 8.653993899842778 2008-Oct-14 20:24:47 LOG4 log_alfabeam: ALFABEAM 5 21.480554661794248 8.716181235533558 2008-Oct-14 20:24:47 LOG4 log_alfabeam: ALFABEAM 6 21.480120461765363 8.822131514783544 2008-Oct-14 20:24:47 INFO2 take_data: Starting WAPP+GALFA scan: 828800263 2008-Oct-14 20:24:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:24:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:24:48 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-14 20:24:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:24:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-14 20:24:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:24:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:24:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:24:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1489.00 2008-Oct-14 20:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:24:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:24:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:24:59 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-14 20:24:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:24:59 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-14 20:24:59 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-14 20:24:59 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-14 20:24:59 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-14 20:24:59 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:24:59 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:24:59 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:24:59 LOG2 antvel: Parameters to Doppler: Topocentric 87899 2008 288 0.0 2008-Oct-14 20:24:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:24:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-14 20:24:59 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-14 20:24:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:24:59 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:24:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-14 20:24:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:24:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:24:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:24:59 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-14 20:24:59 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.560249 2008.7908300694603 18.999933 2008-Oct-14 20:24:59 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000019 8.760000000000000 2008-Oct-14 20:24:59 LOG4 log_alfabeam: ALFABEAM 1 21.474667293595001 8.866020784789235 2008-Oct-14 20:24:59 LOG4 log_alfabeam: ALFABEAM 2 21.469506126580807 8.804898469587888 2008-Oct-14 20:24:59 LOG4 log_alfabeam: ALFABEAM 3 21.469797873537765 8.698830587116841 2008-Oct-14 20:24:59 LOG4 log_alfabeam: ALFABEAM 4 21.475357945303504 8.653966426939245 2008-Oct-14 20:24:59 LOG4 log_alfabeam: ALFABEAM 5 21.480539993664049 8.715775212052590 2008-Oct-14 20:24:59 LOG4 log_alfabeam: ALFABEAM 6 21.480141099614812 8.821755995309470 2008-Oct-14 20:24:59 INFO2 take_data: Starting WAPP+GALFA scan: 828800264 2008-Oct-14 20:25:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:25:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:25:00 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-14 20:25:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:25:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-14 20:25:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:25:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:25:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:25:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1501.00 2008-Oct-14 20:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:25:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:25:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:25:11 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-14 20:25:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:25:11 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-14 20:25:11 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-14 20:25:11 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-14 20:25:11 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-14 20:25:11 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:25:11 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:25:11 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:25:11 LOG2 antvel: Parameters to Doppler: Topocentric 87911 2008 288 0.0 2008-Oct-14 20:25:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:25:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-14 20:25:11 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-14 20:25:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:25:11 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:25:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-14 20:25:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:25:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:25:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:25:11 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-14 20:25:11 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.563592 2008.7908304497173 18.999933 2008-Oct-14 20:25:11 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000026 8.760000000000000 2008-Oct-14 20:25:11 LOG4 log_alfabeam: ALFABEAM 1 21.474702556668905 8.866043817418323 2008-Oct-14 20:25:11 LOG4 log_alfabeam: ALFABEAM 2 21.469521108135371 8.805299245482884 2008-Oct-14 20:25:11 LOG4 log_alfabeam: ALFABEAM 3 21.469777615107464 8.699211350286074 2008-Oct-14 20:25:11 LOG4 log_alfabeam: ALFABEAM 4 21.475322681961188 8.653941558139651 2008-Oct-14 20:25:11 LOG4 log_alfabeam: ALFABEAM 5 21.480525203578402 8.715370629663006 2008-Oct-14 20:25:11 LOG4 log_alfabeam: ALFABEAM 6 21.480161594144768 8.821379308137963 2008-Oct-14 20:25:11 INFO2 take_data: Starting WAPP+GALFA scan: 828800265 2008-Oct-14 20:25:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:25:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:25:12 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-14 20:25:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:25:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-14 20:25:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:25:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:25:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:25:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1513.00 2008-Oct-14 20:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:25:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:25:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:25:23 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-14 20:25:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:25:23 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-14 20:25:23 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-14 20:25:23 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-14 20:25:23 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-14 20:25:23 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:25:23 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:25:23 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:25:23 LOG2 antvel: Parameters to Doppler: Topocentric 87923 2008 288 0.0 2008-Oct-14 20:25:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:25:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-14 20:25:23 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-14 20:25:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:25:23 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:25:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-14 20:25:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:25:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:25:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:25:23 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-14 20:25:23 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.566934 2008.7908308299745 18.999933 2008-Oct-14 20:25:23 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000019 8.760000000000000 2008-Oct-14 20:25:23 LOG4 log_alfabeam: ALFABEAM 1 21.474737771433023 8.866064243263047 2008-Oct-14 20:25:23 LOG4 log_alfabeam: ALFABEAM 2 21.469536198379249 8.805698289081004 2008-Oct-14 20:25:23 LOG4 log_alfabeam: ALFABEAM 3 21.469757515633148 8.699592980575451 2008-Oct-14 20:25:23 LOG4 log_alfabeam: ALFABEAM 4 21.475287465684296 8.653919300613579 2008-Oct-14 20:25:23 LOG4 log_alfabeam: ALFABEAM 5 21.480510301966110 8.714967756226958 2008-Oct-14 20:25:23 LOG4 log_alfabeam: ALFABEAM 6 21.480181932046367 8.821001711703145 2008-Oct-14 20:25:23 INFO2 take_data: Starting WAPP+GALFA scan: 828800266 2008-Oct-14 20:25:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:25:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:25:24 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-14 20:25:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:25:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-14 20:25:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:25:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:25:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:25:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1525.00 2008-Oct-14 20:25:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:25:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:25:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:25:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:25:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:25:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:25:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:25:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:25:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:25:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:25:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:25:35 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-14 20:25:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:25:35 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-14 20:25:35 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-14 20:25:35 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-14 20:25:35 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-14 20:25:35 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:25:35 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:25:35 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:25:35 LOG2 antvel: Parameters to Doppler: Topocentric 87935 2008 288 0.0 2008-Oct-14 20:25:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:25:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-14 20:25:35 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-14 20:25:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:25:35 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:25:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-14 20:25:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:25:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:25:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:25:35 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-14 20:25:35 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.570277 2008.7908312102315 18.999933 2008-Oct-14 20:25:35 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000026 8.760000000000000 2008-Oct-14 20:25:35 LOG4 log_alfabeam: ALFABEAM 1 21.474772956365616 8.866082083094394 2008-Oct-14 20:25:35 LOG4 log_alfabeam: ALFABEAM 2 21.469551404722594 8.806095814504534 2008-Oct-14 20:25:35 LOG4 log_alfabeam: ALFABEAM 3 21.469737564050405 8.699975672698210 2008-Oct-14 20:25:35 LOG4 log_alfabeam: ALFABEAM 4 21.475252277998720 8.653899632761981 2008-Oct-14 20:25:35 LOG4 log_alfabeam: ALFABEAM 5 21.480495281511320 8.714566376013833 2008-Oct-14 20:25:35 LOG4 log_alfabeam: ALFABEAM 6 21.480202124481000 8.820623013236469 2008-Oct-14 20:25:35 INFO2 take_data: Starting WAPP+GALFA scan: 828800267 2008-Oct-14 20:25:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:25:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:25:36 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-14 20:25:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:25:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-14 20:25:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:25:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:25:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:25:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1537.00 2008-Oct-14 20:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:25:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:25:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:25:47 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-14 20:25:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:25:47 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-14 20:25:47 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-14 20:25:47 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-14 20:25:47 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-14 20:25:47 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:25:47 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:25:47 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:25:47 LOG2 antvel: Parameters to Doppler: Topocentric 87947 2008 288 0.0 2008-Oct-14 20:25:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:25:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-14 20:25:47 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-14 20:25:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:25:47 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:25:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-14 20:25:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:25:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:25:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:25:47 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-14 20:25:47 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.573619 2008.7908315904886 18.999933 2008-Oct-14 20:25:47 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000033 8.759999999999998 2008-Oct-14 20:25:47 LOG4 log_alfabeam: ALFABEAM 1 21.474808087841144 8.866097335341189 2008-Oct-14 20:25:47 LOG4 log_alfabeam: ALFABEAM 2 21.469566716428901 8.806491559723591 2008-Oct-14 20:25:47 LOG4 log_alfabeam: ALFABEAM 3 21.469717773220289 8.700359163960735 2008-Oct-14 20:25:47 LOG4 log_alfabeam: ALFABEAM 4 21.475217142536827 8.653882557515109 2008-Oct-14 20:25:47 LOG4 log_alfabeam: ALFABEAM 5 21.480480152821428 8.714166754046955 2008-Oct-14 20:25:47 LOG4 log_alfabeam: ALFABEAM 6 21.480222158397069 8.820243472588430 2008-Oct-14 20:25:47 INFO2 take_data: Starting WAPP+GALFA scan: 828800268 2008-Oct-14 20:25:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:25:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:25:48 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-14 20:25:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:25:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-14 20:25:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:25:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:25:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:25:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1549.00 2008-Oct-14 20:25:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:25:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:25:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:25:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:25:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:25:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:25:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:25:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:25:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:25:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:25:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:25:59 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-14 20:25:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:25:59 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-14 20:25:59 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-14 20:25:59 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-14 20:25:59 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-14 20:25:59 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:25:59 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:25:59 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:25:59 LOG2 antvel: Parameters to Doppler: Topocentric 87959 2008 288 0.0 2008-Oct-14 20:25:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:25:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-14 20:25:59 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-14 20:25:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:25:59 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:25:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-14 20:25:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:25:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-14 20:25:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-14 20:25:59 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-14 20:25:59 LOG5 log_alfabeam: Parameters: 21.474999999999998 8.7599999999999998 21.576962 2008.7908319707456 18.999933 2008-Oct-14 20:25:59 LOG4 log_alfabeam: ALFABEAM 0 21.475000000000019 8.760000000000003 2008-Oct-14 20:25:59 LOG4 log_alfabeam: ALFABEAM 1 21.474843184327426 8.866110018787221 2008-Oct-14 20:25:59 LOG4 log_alfabeam: ALFABEAM 2 21.469582141003372 8.806885737830720 2008-Oct-14 20:25:59 LOG4 log_alfabeam: ALFABEAM 3 21.469698132185265 8.700743650034184 2008-Oct-14 20:25:59 LOG4 log_alfabeam: ALFABEAM 4 21.475182040834248 8.653868055260796 2008-Oct-14 20:25:59 LOG4 log_alfabeam: ALFABEAM 5 21.480464908484077 8.713768675604488 2008-Oct-14 20:25:59 LOG4 log_alfabeam: ALFABEAM 6 21.480242044850989 8.819862896013056 2008-Oct-14 20:25:59 INFO2 take_data: Starting WAPP+GALFA scan: 828800269 2008-Oct-14 20:26:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-14 20:26:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-14 20:26:00 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-14 20:26:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:26:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-14 20:26:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:26:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:26:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:26:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1561.00 2008-Oct-14 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:26:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:26:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-14 20:26:11 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-14 20:26:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-14 20:26:11 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-14 20:26:11 INFO2 smartfreq: Switching off CAL 2008-Oct-14 20:26:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 20:26:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 20:26:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 20:26:11 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-14 20:26:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 20:26:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 20:26:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 20:26:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 20:26:11 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-14 20:26:11 INFO3 restore_frequencies: Restoring original frequencies 2008-Oct-14 20:26:11 LOG5 antvel: Calling 'antvel 212830.000000 84536.000000 J 0' 2008-Oct-14 20:26:11 LOG2 antvel: Precessing RA = 21:28:30.0 Dec = +08:45:36.0 Epoch = 2008.79083 J 2008-Oct-14 20:26:11 LOG2 antvel: Computed apparent RA = 21:28:57.0 Dec = +08:48:04.3 2008-Oct-14 20:26:11 LOG2 antvel: Parameters to Doppler: Topocentric 87971 2008 288 0.0 2008-Oct-14 20:26:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:26:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-14 20:26:11 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-14 20:26:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:26:11 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:26:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-14 20:26:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:26:11 STOP finish_task: Finishing task 'smart frequency switching' 2008-Oct-14 20:26:11 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-14 20:26:11 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Oct-14 20:26:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-14 20:26:12 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Oct-14 20:26:12 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-14 20:26:12 NOTE run_command_file: DONE with command file processing 2008-Oct-14 20:26:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Oct-14 20:26:12 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Oct-14 20:26:12 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-14 20:26:12 DONE finish_task: DONE finished running: command file 'command_galfasrc' 2008-Oct-14 20:26:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-14 20:26:12 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'OK' 2008-Oct-14 20:26:12 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-14 20:26:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-14 20:26:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:26:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:26:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:26:36 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-14 20:26:36 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-14 20:26:36 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-14 20:26:36 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-14 20:26:36 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-14 20:26:36 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-14 20:26:36 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-14 20:26:36 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-14 20:26:36 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-14 20:26:36 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-14 20:26:36 LOG3 exec_msg: Closing socket 2008-Oct-14 20:26:36 LOG3 exec_msg: Closing socket 2008-Oct-14 20:26:36 LOG3 exec_msg: Closing socket 2008-Oct-14 20:26:36 LOG3 exec_msg: Closing socket 2008-Oct-14 20:26:38 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-14 20:26:39 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-14 20:26:39 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-14 20:26:39 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-14 20:26:56 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-14 20:26:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-14 20:26:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-14 20:26:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-14 20:26:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-14 20:26:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-14 20:26:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-14 20:26:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-14 20:26:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-14 20:26:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-14 20:26:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-14 20:26:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-14 20:26:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-14 20:26:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-14 20:26:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-14 20:26:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-14 20:26:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-14 20:26:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-14 20:26:59 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-14 20:26:59 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-14 20:26:59 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-14 20:26:59 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-14 20:26:59 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-14 20:26:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-14 20:26:59 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-14 20:26:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 20:26:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 20:26:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 20:26:59 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-14 20:26:59 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 20:26:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 20:26:59 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-14 20:26:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 20:26:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 20:26:59 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-14 20:26:59 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-14 20:26:59 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-14 20:26:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-14 20:26:59 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-14 20:26:59 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-14 20:26:59 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-14 20:26:59 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-14 20:26:59 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-14 20:26:59 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-14 20:26:59 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-14 20:26:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-14 20:26:59 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-14 20:26:59 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-14 20:26:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-14 20:26:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:26:59 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-14 20:26:59 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-14 20:26:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-14 20:26:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-14 20:26:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:26:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:26:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:26:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:26:59 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-14 20:27:00 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-14 20:27:00 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-14 20:27:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-14 20:27:00 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-14 20:27:00 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-14 20:27:00 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-14 20:27:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-14 20:27:00 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-14 20:27:00 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-14 20:27:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-14 20:27:00 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-14 20:27:00 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-14 20:27:00 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-14 20:27:00 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-14 20:27:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-14 20:27:00 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-14 20:27:00 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-14 20:27:00 START begin_task: Starting task 'selecting calibration port' 2008-Oct-14 20:27:00 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-14 20:27:00 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-14 20:27:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-14 20:27:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:27:00 START begin_task: Starting task 'waiting on calport' 2008-Oct-14 20:27:00 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-14 20:27:00 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-14 20:27:00 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-14 20:27:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:27:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:27:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 20:27:01 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-14 20:27:01 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-14 20:27:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-14 20:27:01 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-14 20:27:01 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-14 20:27:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 20:27:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 20:27:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 20:27:01 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-14 20:27:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:27:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 20:27:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 20:27:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 20:27:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 20:27:01 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-14 20:27:01 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-14 20:27:01 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-14 20:27:01 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-14 20:27:01 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-14 20:27:01 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-14 20:27:01 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-14 20:27:01 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-14 20:27:01 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-14 20:27:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:27:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:27:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:27:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:27:01 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-14 20:27:01 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-14 20:27:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 20:27:01 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-14 20:27:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-14 20:27:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-14 20:27:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 20:27:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 20:27:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 20:27:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 20:27:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 20:27:01 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-14 20:27:01 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-14 20:27:01 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-14 20:27:01 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-14 20:27:01 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-14 20:27:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-14 20:27:01 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-14 20:27:01 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-14 20:27:01 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-14 20:27:01 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-14 20:27:01 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-14 20:27:01 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-14 20:27:01 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-14 20:27:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-14 20:27:01 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-14 20:27:01 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-14 20:27:01 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-14 20:27:01 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-14 20:27:01 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-14 20:27:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-14 20:27:01 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-14 20:27:02 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-14 20:27:02 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-14 20:27:02 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-14 20:27:02 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-14 20:29:06 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-14 20:29:07 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-14 20:29:07 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-14 20:29:07 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-14 20:29:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-14 20:29:07 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-14 20:29:07 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-14 20:29:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-14 20:29:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:29:07 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-14 20:29:07 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-14 20:29:08 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-14 20:29:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:29:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:29:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 20:29:11 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-14 20:29:11 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-14 20:29:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-14 20:29:11 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-14 20:29:11 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-14 20:29:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-14 20:29:11 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-14 20:29:12 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-14 20:29:12 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-14 20:29:12 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-14 20:29:12 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-14 20:29:12 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-14 20:29:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-14 20:29:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:29:12 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 6 6 dB 2008-Oct-14 20:29:12 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 5 dB 2008-Oct-14 20:29:12 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2008-Oct-14 20:29:12 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 3 dB 2008-Oct-14 20:29:12 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-14 20:29:12 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-14 20:29:12 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-14 20:29:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.886 1.033 ALFA beam 1: 0.989 0.998 2008-Oct-14 20:29:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.105 1.082 ALFA beam 3: 0.954 0.919 2008-Oct-14 20:29:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.914 1.093 ALFA beam 5: 1.007 0.938 2008-Oct-14 20:29:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.033 1.047 ALFA beam 7: 0.918 0.931 2008-Oct-14 20:29:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-14 20:29:12 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-14 20:29:12 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Oct-14 20:29:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 20:29:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-14 20:29:12 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-14 20:29:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-14 20:29:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-14 20:29:12 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-14 20:29:12 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-14 20:29:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-14 20:29:12 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-14 20:29:13 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-14 20:29:34 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Oct-14 20:29:34 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift36p2 214000.0 +084536 J 0 Topocentric velocity(optical) 2008-Oct-14 20:29:34 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift36p2 214000.0 +084536 J 0 Topocentric velocity(optical)' 2008-Oct-14 20:29:34 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Oct-14 20:29:34 LOG5 begin_task: Level: (1) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-14 20:29:34 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2008-Oct-14 20:29:34 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Oct-14 20:29:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift36p2} 2008-Oct-14 20:29:35 INFO5 fixed_driftmap: Start: year = 2008.7908387836844 RA = 21:40:27.2 Dec = +08:48:09.8 2008-Oct-14 20:29:35 NOTE fixed_driftmap: Setting ZA to 9:33:03.9 ... 2008-Oct-14 20:29:35 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 9.55 2008-Oct-14 20:29:35 LOG3 track_source: Calling 'track_source drift36p2 360.0 9.5510702727 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Oct-14 20:29:35 START begin_task: Starting task 'sending tracking commands' 2008-Oct-14 20:29:35 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-14 20:29:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift36p2} INFO {Slewing to source 'drift36p2' ...} 2008-Oct-14 20:29:35 INFO1 track_source: Starting to track drift36p2 2008-Oct-14 20:29:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift36p2" 2008-Oct-14 20:29:35 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Oct-14 20:29:35 LOG3 vw_send: To DATATAKING: set dec 9.5510702727 2008-Oct-14 20:29:35 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-14 20:29:35 LOG3 vw_send: To DATATAKING: pnt tr 360.0 9.5510702727 -CF 2008-Oct-14 20:29:35 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-14 20:29:35 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-14 20:29:35 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-14 20:29:35 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-14 20:29:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 20:29:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-14 20:29:35 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-14 20:29:35 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-14 20:29:35 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-14 20:29:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-14 20:29:35 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-14 20:29:35 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Oct-14 20:29:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-14 20:29:35 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-14 20:29:35 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-14 20:29:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift36p2" 2008-Oct-14 20:29:35 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Oct-14 20:29:35 LOG4 got_cormsg: From DATATAKING: set dec 9.5510702727 2008-Oct-14 20:29:35 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Oct-14 20:29:35 LOG4 got_cormsg: From DATATAKING: vw% 9.5510702727 2008-Oct-14 20:29:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:29:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-14 20:29:35 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 9.5510702727 -CF 2008-Oct-14 20:29:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-14 20:29:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-14 20:29:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:29:36 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-14 20:29:36 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-14 20:29:36 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-14 20:29:36 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-14 20:29:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-14 20:29:36 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-14 20:29:36 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-14 20:29:36 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-14 20:29:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 20:29:36 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-14 20:29:36 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-14 20:29:36 START begin_task: Starting task 'waiting on telescope' 2008-Oct-14 20:29:36 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-14 20:29:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-14 20:29:36 LOG3 waittrk: Start waittrk 5 2008-Oct-14 20:29:36 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-14 20:29:36 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-14 20:29:41 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-14 20:29:41 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-14 20:29:41 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-14 20:29:41 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-14 20:30:24 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-14 20:30:24 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-14 20:30:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-14 20:30:25 INFO2 waittrk: Now tracking drift36p2 2008-Oct-14 20:30:25 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 9.52 2008-Oct-14 20:30:25 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-14 20:30:25 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-14 20:30:25 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Oct-14 20:30:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 20:30:25 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-14 20:30:25 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-14 20:30:25 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 20:30:25 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-14 20:30:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 20:30:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 20:30:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:30:25 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 20:30:25 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-14 20:30:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 20:30:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:30:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:30:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 20:30:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 20:30:25 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-14 20:30:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 20:30:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 20:30:25 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 20:30:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 20:30:25 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-14 20:30:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:30:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 20:30:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 20:30:26 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-14 20:30:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 20:30:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 20:30:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 20:30:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 20:30:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 20:30:26 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-14 20:30:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 20:30:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 20:30:26 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-14 20:30:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 20:30:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 20:30:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 20:30:26 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-14 20:30:26 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Oct-14 20:30:26 INFO2 astwait: Waiting for 22 seconds from 00:30:26 to 00:30:48 UTC ... 2008-Oct-14 20:30:26 LOG4 send_obs_status: To obs_status: <1> TASKTIME 22 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Oct-14 20:30:26 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Oct-14 20:30:26 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-14 20:30:48 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Oct-14 20:30:48 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-14 20:30:48 INFO3 astwait: Finished waiting 2008-Oct-14 20:30:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-14 20:30:48 LOG5 dopset_later: Calling 'dopset_later 61.160119008873998' 2008-Oct-14 20:30:48 INFO3 dopset_later: Setting Doppler correction for 20:31:48 (61.2 seconds from now) 2008-Oct-14 20:30:48 LOG5 antvel: Calling 'antvel 360.000000 9.551070 F 61.160119008873998' 2008-Oct-14 20:30:48 LOG2 antvel: Transforming current Az = 360.00 ZA = 9.55 to apparent RA = 21:40:27.0 Dec = +08:48:09.8 2008-Oct-14 20:30:48 LOG2 antvel: Parameters to Doppler: Topocentric 88308 2008 288 0.0 2008-Oct-14 20:30:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-14 20:30:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-14 20:30:48 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-14 20:30:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-14 20:30:48 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-14 20:30:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-14 20:30:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:30:48 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-14 20:30:48 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-14 20:30:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-14 20:30:48 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-14 20:30:48 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-14 20:30:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-14 20:30:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:30:48 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-14 20:30:48 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-14 20:30:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-14 20:30:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-14 20:30:48 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-14 20:30:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:30:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:30:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:30:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:30:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 20:30:51 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-14 20:30:51 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-14 20:30:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-14 20:30:51 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-14 20:30:51 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-14 20:30:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-14 20:30:51 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-14 20:30:51 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-14 20:30:51 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-14 20:30:51 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-14 20:30:51 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-14 20:30:51 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-14 20:30:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-14 20:30:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:30:51 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 6 6 dB 2008-Oct-14 20:30:51 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 5 dB 2008-Oct-14 20:30:51 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2008-Oct-14 20:30:51 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 3 dB 2008-Oct-14 20:30:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-14 20:30:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-14 20:30:51 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-14 20:30:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.897 1.035 ALFA beam 1: 0.990 0.999 2008-Oct-14 20:30:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.099 1.103 ALFA beam 3: 0.964 0.937 2008-Oct-14 20:30:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.924 1.122 ALFA beam 5: 1.004 0.941 2008-Oct-14 20:30:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.056 1.078 ALFA beam 7: 0.931 0.958 2008-Oct-14 20:30:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-14 20:30:51 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-14 20:30:51 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-14 20:30:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 20:30:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-14 20:30:51 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-14 20:30:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 20:30:52 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-14 20:30:52 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-14 20:30:52 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-14 20:30:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 20:30:52 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-14 20:30:52 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-14 20:30:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:30:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:30:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:30:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:30:52 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:40:27.2 LST = 21:39:29.9 diff = 57.3 secs 2008-Oct-14 20:30:52 INFO2 fixed_driftmap: Waiting 55.3 seconds for RA 21:40:27 2008-Oct-14 20:30:52 INFO2 lstwait: Waiting for 55.2 secs from LST 21:39:30 to LST 21:40:25 ... 2008-Oct-14 20:30:52 LOG4 send_obs_status: To obs_status: <1> TASKTIME 55.16612980504862 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Oct-14 20:30:52 START begin_task: Starting task 'waiting on wait on LST' 2008-Oct-14 20:30:52 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-14 20:30:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 20:30:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0015.fits 2008-Oct-14 20:30:52 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081014.a2010.0015.fits} 2008-Oct-14 20:31:47 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Oct-14 20:31:47 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-14 20:31:47 LOG4 lstwait: Finished waiting 0.84 seconds late 2008-Oct-14 20:31:47 INFO3 lstwait: Finished waiting 2008-Oct-14 20:31:47 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-14 20:31:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Oct-14 20:31:47 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-14 20:31:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 20:31:47 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 20:31:47 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 20:31:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 20:31:47 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-14 20:31:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 20:31:47 INFO2 take_data: Starting WAPP scan: 828800270 2008-Oct-14 20:31:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 20:31:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 20:31:48 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-14 20:31:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:31:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1909.00 2008-Oct-14 20:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:41:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:41:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 20:41:49 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-14 20:41:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 20:41:49 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-14 20:41:49 LOG1 fixed_driftmap: New position: year = 2008.790862074429 RA = 21:50:03.0 RA/Dec = 21:50:30.3 +08:48:14.4 2008-Oct-14 20:41:49 NOTE fixed_driftmap: Correcting ZA to 9:32:59.3 ... 2008-Oct-14 20:41:49 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5497993544 -CF 2008-Oct-14 20:41:49 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 20:41:49 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 20:41:49 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-14 20:41:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 20:41:49 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 20:41:49 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-14 20:41:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 20:41:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 20:41:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:41:49 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 20:41:49 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-14 20:41:49 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5497993544 -CF 2008-Oct-14 20:41:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:41:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 20:41:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:41:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:41:49 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 20:41:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 20:41:49 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-14 20:41:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 20:41:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 20:41:49 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 20:41:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 20:41:49 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-14 20:41:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:41:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 20:41:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 20:41:50 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-14 20:41:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 20:41:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 20:41:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 20:41:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 20:41:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 20:41:50 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-14 20:41:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 20:41:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 20:41:50 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-14 20:41:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 20:41:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 20:41:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 20:41:50 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-14 20:41:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 20:41:50 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 20:41:50 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 20:41:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 20:41:50 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-14 20:41:50 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 20:41:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 20:41:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 20:41:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 20:41:50 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-14 20:41:50 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 20:41:50 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 20:41:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 20:41:50 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-14 20:41:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 20:41:50 INFO2 take_data: Starting WAPP scan: 828800271 2008-Oct-14 20:41:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 20:41:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 20:41:50 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-14 20:41:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:41:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2511.00 2008-Oct-14 20:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:41:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:41:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 20:41:52 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-14 20:41:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 20:41:52 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-14 20:41:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 20:41:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 20:41:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 20:41:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 20:41:52 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-14 20:41:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 20:41:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 20:41:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 20:41:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 20:41:52 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-14 20:41:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 20:41:52 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 20:41:52 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-14 20:41:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 20:41:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 20:41:52 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 20:41:52 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-14 20:41:52 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Oct-14 20:41:52 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-14 20:41:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:41:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:41:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:41:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:41:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 20:41:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 20:41:53 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 20:41:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 20:41:53 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-14 20:41:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 20:41:53 INFO2 take_data: Starting WAPP scan: 828800272 2008-Oct-14 20:41:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 20:41:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 20:41:53 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-14 20:41:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 20:41:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:41:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2514.00 2008-Oct-14 20:41:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0016.fits 2008-Oct-14 20:41:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0016.fits} 2008-Oct-14 20:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:47:27 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 20:47:27.300 (seconds: 74847.300)!} 2008-Oct-14 20:47:27 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 20:47:27.300 (seconds: 74847.300)! 2008-Oct-14 20:47:28 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 74846.0 to 74847.0! 2008-Oct-14 20:47:29 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (74846.0 - 74848.0)! 2008-Oct-14 20:51:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:51:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 20:51:54 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-14 20:51:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 20:51:54 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-14 20:51:54 LOG1 fixed_driftmap: New position: year = 2008.7908812457222 RA = 22:00:09.5 RA/Dec = 22:00:36.9 +08:48:18.7 2008-Oct-14 20:51:54 NOTE fixed_driftmap: Correcting ZA to 9:32:55.0 ... 2008-Oct-14 20:51:54 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5486023739 -CF 2008-Oct-14 20:51:54 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 20:51:54 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 20:51:54 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-14 20:51:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 20:51:54 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 20:51:54 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-14 20:51:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 20:51:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 20:51:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:51:54 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 20:51:54 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-14 20:51:54 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5486023739 -CF 2008-Oct-14 20:51:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:51:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 20:51:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 20:51:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:51:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 20:51:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 20:51:54 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-14 20:51:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 20:51:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 20:51:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 20:51:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 20:51:55 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-14 20:51:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 20:51:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 20:51:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 20:51:55 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-14 20:51:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 20:51:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 20:51:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 20:51:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 20:51:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 20:51:55 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-14 20:51:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 20:51:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 20:51:55 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-14 20:51:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 20:51:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 20:51:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 20:51:55 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-14 20:51:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 20:51:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 20:51:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 20:51:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 20:51:55 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-14 20:51:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 20:51:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 20:51:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 20:51:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 20:51:55 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-14 20:51:55 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 20:51:55 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 20:51:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 20:51:55 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-14 20:51:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 20:51:55 INFO2 take_data: Starting WAPP scan: 828800273 2008-Oct-14 20:51:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 20:51:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 20:51:55 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-14 20:51:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:51:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3116.00 2008-Oct-14 20:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 20:51:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 20:51:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 20:51:57 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-14 20:51:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 20:51:57 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-14 20:51:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 20:51:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 20:51:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 20:51:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 20:51:57 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-14 20:51:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 20:51:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 20:51:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 20:51:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 20:51:57 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-14 20:51:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 20:51:57 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 20:51:57 LOG5 finish_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-14 20:51:57 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 20:51:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 20:51:57 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 20:51:57 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-14 20:51:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Oct-14 20:51:57 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Oct-14 20:51:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:51:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:51:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:51:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 20:51:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 20:51:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 20:51:58 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 20:51:58 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 20:51:58 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-14 20:51:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 20:51:58 INFO2 take_data: Starting WAPP scan: 828800274 2008-Oct-14 20:51:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 20:51:58 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 20:51:58 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-14 20:51:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 20:51:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 20:51:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3119.00 2008-Oct-14 20:51:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0017.fits 2008-Oct-14 20:51:58 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0017.fits} 2008-Oct-14 20:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 20:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 20:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 20:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 20:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 20:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 20:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 20:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 20:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 21:01:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 21:01:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 21:01:59 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-14 21:01:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 21:01:59 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-14 21:01:59 LOG1 fixed_driftmap: New position: year = 2008.7909004170153 RA = 22:10:16.1 RA/Dec = 22:10:43.6 +08:48:22.7 2008-Oct-14 21:01:59 NOTE fixed_driftmap: Correcting ZA to 9:32:51.0 ... 2008-Oct-14 21:01:59 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5474893681 -CF 2008-Oct-14 21:01:59 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 21:01:59 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 21:01:59 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-14 21:01:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 21:01:59 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 21:01:59 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-14 21:01:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 21:01:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 21:01:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 21:01:59 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 21:01:59 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-14 21:01:59 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5474893681 -CF 2008-Oct-14 21:01:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:01:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 21:01:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 21:01:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:01:59 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 21:01:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 21:01:59 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-14 21:01:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 21:01:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 21:01:59 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 21:01:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 21:01:59 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-14 21:02:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:02:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 21:02:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 21:02:00 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-14 21:02:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 21:02:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 21:02:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 21:02:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 21:02:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 21:02:00 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-14 21:02:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 21:02:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 21:02:00 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-14 21:02:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 21:02:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 21:02:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 21:02:00 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-14 21:02:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 21:02:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 21:02:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 21:02:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 21:02:00 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-14 21:02:00 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 21:02:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 21:02:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 21:02:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 21:02:00 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-14 21:02:00 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 21:02:00 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 21:02:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 21:02:00 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-14 21:02:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 21:02:00 INFO2 take_data: Starting WAPP scan: 828800275 2008-Oct-14 21:02:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 21:02:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 21:02:00 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-14 21:02:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 21:02:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3721.00 2008-Oct-14 21:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 21:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 21:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 21:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 21:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 21:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 21:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 21:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 21:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 21:02:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 21:02:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 21:02:02 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-14 21:02:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 21:02:02 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-14 21:02:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 21:02:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 21:02:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 21:02:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 21:02:02 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-14 21:02:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 21:02:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 21:02:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 21:02:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 21:02:02 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-14 21:02:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 21:02:02 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 21:02:02 LOG5 finish_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-14 21:02:02 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 21:02:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 21:02:02 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 21:02:02 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-14 21:02:02 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Oct-14 21:02:02 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Oct-14 21:02:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:02:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:02:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:02:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:02:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 21:02:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 21:02:03 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 21:02:03 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 21:02:03 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-14 21:02:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 21:02:03 INFO2 take_data: Starting WAPP scan: 828800276 2008-Oct-14 21:02:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 21:02:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 21:02:03 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-14 21:02:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 21:02:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 21:02:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3724.00 2008-Oct-14 21:02:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0018.fits 2008-Oct-14 21:02:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0018.fits} 2008-Oct-14 21:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 21:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 21:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 21:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 21:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 21:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 21:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 21:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 21:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 21:02:26 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:02:26.300 (seconds: 75746.300)!} 2008-Oct-14 21:02:26 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:02:26.300 (seconds: 75746.300)! 2008-Oct-14 21:02:27 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 75745.0 to 75746.0! 2008-Oct-14 21:02:28 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (75745.0 - 75747.0)! 2008-Oct-14 21:12:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 21:12:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 21:12:04 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-14 21:12:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 21:12:04 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-14 21:12:04 LOG1 fixed_driftmap: New position: year = 2008.7909195883085 RA = 22:20:22.6 RA/Dec = 22:20:50.3 +08:48:26.4 2008-Oct-14 21:12:04 NOTE fixed_driftmap: Correcting ZA to 9:32:47.3 ... 2008-Oct-14 21:12:04 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5464625039 -CF 2008-Oct-14 21:12:04 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 21:12:04 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 21:12:04 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-14 21:12:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 21:12:04 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 21:12:04 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-14 21:12:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 21:12:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 21:12:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 21:12:04 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 21:12:04 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-14 21:12:04 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5464625039 -CF 2008-Oct-14 21:12:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:12:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 21:12:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 21:12:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:12:04 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 21:12:04 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 21:12:04 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-14 21:12:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 21:12:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 21:12:04 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 21:12:04 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 21:12:04 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-14 21:12:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:12:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 21:12:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 21:12:05 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-14 21:12:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 21:12:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 21:12:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 21:12:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 21:12:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 21:12:05 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-14 21:12:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 21:12:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 21:12:05 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-14 21:12:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 21:12:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 21:12:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 21:12:05 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-14 21:12:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 21:12:05 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 21:12:05 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 21:12:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 21:12:05 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Oct-14 21:12:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 21:12:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 21:12:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 21:12:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 21:12:05 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Oct-14 21:12:05 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 21:12:06 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 21:12:06 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 21:12:06 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-14 21:12:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 21:12:06 INFO2 take_data: Starting WAPP scan: 828800277 2008-Oct-14 21:12:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 21:12:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 21:12:06 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-14 21:12:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 21:12:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4327.00 2008-Oct-14 21:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 21:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 21:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 21:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 21:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 21:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 21:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 21:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 21:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 21:12:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 21:12:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 21:12:08 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-14 21:12:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 21:12:08 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-14 21:12:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 21:12:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 21:12:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 21:12:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 21:12:08 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-14 21:12:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 21:12:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 21:12:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 21:12:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 21:12:08 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-14 21:12:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 21:12:08 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 21:12:08 LOG5 finish_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-14 21:12:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 21:12:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 21:12:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 21:12:08 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-14 21:12:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Oct-14 21:12:09 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Oct-14 21:12:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:12:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:12:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:12:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:12:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 21:12:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 21:12:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 21:12:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 21:12:09 LOG5 begin_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-14 21:12:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 21:12:09 INFO2 take_data: Starting WAPP scan: 828800278 2008-Oct-14 21:12:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 21:12:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 21:12:09 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-14 21:12:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 21:12:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 21:12:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4330.00 2008-Oct-14 21:12:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0019.fits 2008-Oct-14 21:12:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0019.fits} 2008-Oct-14 21:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 21:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 21:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 21:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 21:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 21:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 21:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 21:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 21:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 21:17:25 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:17:25.300 (seconds: 76645.300)!} 2008-Oct-14 21:17:25 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:17:25.300 (seconds: 76645.300)! 2008-Oct-14 21:17:26 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 76644.0 to 76645.0! 2008-Oct-14 21:17:27 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (76644.0 - 76646.0)! 2008-Oct-14 21:22:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 21:22:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 21:22:10 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-14 21:22:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 21:22:10 LOG5 end_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-14 21:22:10 LOG1 fixed_driftmap: New position: year = 2008.7909387912896 RA = 22:30:30.2 RA/Dec = 22:30:57.9 +08:48:29.8 2008-Oct-14 21:22:10 NOTE fixed_driftmap: Correcting ZA to 9:32:43.9 ... 2008-Oct-14 21:22:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5455223055 -CF 2008-Oct-14 21:22:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 21:22:10 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 21:22:10 LOG5 begin_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-14 21:22:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 21:22:10 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 21:22:10 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-14 21:22:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 21:22:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 21:22:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 21:22:10 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 21:22:10 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Oct-14 21:22:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5455223055 -CF 2008-Oct-14 21:22:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:22:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 21:22:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 21:22:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:22:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 21:22:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 21:22:10 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Oct-14 21:22:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 21:22:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 21:22:11 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 21:22:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 21:22:11 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2008-Oct-14 21:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:22:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 21:22:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 21:22:11 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2008-Oct-14 21:22:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 21:22:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 21:22:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 21:22:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 21:22:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 21:22:11 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-14 21:22:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 21:22:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 21:22:11 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-14 21:22:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 21:22:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 21:22:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 21:22:11 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-14 21:22:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 21:22:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 21:22:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 21:22:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 21:22:11 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-14 21:22:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 21:22:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 21:22:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 21:22:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 21:22:11 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-14 21:22:11 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 21:22:11 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 21:22:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 21:22:11 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-14 21:22:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 21:22:11 INFO2 take_data: Starting WAPP scan: 828800279 2008-Oct-14 21:22:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 21:22:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 21:22:11 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-14 21:22:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 21:22:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4932.00 2008-Oct-14 21:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 21:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 21:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 21:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 21:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 21:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 21:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 21:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 21:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 21:22:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 21:22:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 21:22:13 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-14 21:22:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 21:22:13 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-14 21:22:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 21:22:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 21:22:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 21:22:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 21:22:13 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-14 21:22:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 21:22:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 21:22:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 21:22:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 21:22:13 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-14 21:22:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 21:22:13 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 21:22:13 LOG5 finish_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-14 21:22:13 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 21:22:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 21:22:13 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 21:22:13 LOG5 end_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-14 21:22:13 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2008-Oct-14 21:22:13 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2008-Oct-14 21:22:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:22:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:22:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:22:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:22:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 21:22:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 21:22:14 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 21:22:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 21:22:14 LOG5 begin_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-14 21:22:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 21:22:14 INFO2 take_data: Starting WAPP scan: 828800280 2008-Oct-14 21:22:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 21:22:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 21:22:14 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-14 21:22:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 21:22:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 21:22:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4935.00 2008-Oct-14 21:22:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0020.fits 2008-Oct-14 21:22:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0020.fits} 2008-Oct-14 21:22:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 21:22:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 21:22:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 21:22:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 21:22:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 21:22:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 21:22:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 21:22:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 21:22:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 21:32:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 21:32:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 21:32:15 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-14 21:32:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 21:32:15 LOG5 end_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-14 21:32:15 LOG1 fixed_driftmap: New position: year = 2008.7909579625828 RA = 22:40:36.7 RA/Dec = 22:41:04.6 +08:48:32.9 2008-Oct-14 21:32:15 NOTE fixed_driftmap: Correcting ZA to 9:32:40.8 ... 2008-Oct-14 21:32:15 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5446737052 -CF 2008-Oct-14 21:32:15 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 21:32:15 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 21:32:15 LOG5 begin_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-14 21:32:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 21:32:15 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 21:32:15 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-14 21:32:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 21:32:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 21:32:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 21:32:15 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 21:32:15 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Oct-14 21:32:15 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5446737052 -CF 2008-Oct-14 21:32:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:32:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 21:32:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 21:32:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:32:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 21:32:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 21:32:15 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Oct-14 21:32:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 21:32:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 21:32:15 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 21:32:15 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 21:32:15 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Oct-14 21:32:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:32:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 21:32:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 21:32:16 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Oct-14 21:32:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 21:32:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 21:32:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 21:32:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 21:32:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 21:32:16 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Oct-14 21:32:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 21:32:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 21:32:16 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Oct-14 21:32:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 21:32:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 21:32:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 21:32:16 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-14 21:32:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 21:32:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 21:32:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 21:32:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 21:32:16 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Oct-14 21:32:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 21:32:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 21:32:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 21:32:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 21:32:17 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Oct-14 21:32:17 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 21:32:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 21:32:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 21:32:17 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2008-Oct-14 21:32:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 21:32:17 INFO2 take_data: Starting WAPP scan: 828800281 2008-Oct-14 21:32:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 21:32:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 21:32:17 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2008-Oct-14 21:32:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 21:32:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5538.00 2008-Oct-14 21:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 21:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 21:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 21:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 21:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 21:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 21:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 21:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 21:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 21:32:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 21:32:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 21:32:19 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2008-Oct-14 21:32:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 21:32:19 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2008-Oct-14 21:32:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 21:32:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 21:32:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 21:32:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 21:32:19 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Oct-14 21:32:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 21:32:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 21:32:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 21:32:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 21:32:19 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Oct-14 21:32:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 21:32:19 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 21:32:19 LOG5 finish_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-14 21:32:19 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 21:32:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 21:32:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 21:32:19 LOG5 end_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-14 21:32:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2008-Oct-14 21:32:20 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2008-Oct-14 21:32:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:32:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:32:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:32:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:32:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 21:32:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 21:32:20 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 21:32:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 21:32:20 LOG5 begin_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2008-Oct-14 21:32:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 21:32:20 INFO2 take_data: Starting WAPP scan: 828800282 2008-Oct-14 21:32:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 21:32:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 21:32:20 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Oct-14 21:32:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 21:32:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 21:32:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5541.00 2008-Oct-14 21:32:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0021.fits 2008-Oct-14 21:32:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0021.fits} 2008-Oct-14 21:32:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 21:32:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 21:32:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 21:32:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 21:32:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 21:32:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 21:32:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 21:32:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 21:32:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 21:32:24 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:32:24.299 (seconds: 77544.299)!} 2008-Oct-14 21:32:24 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:32:24.299 (seconds: 77544.299)! 2008-Oct-14 21:32:25 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 77543.0 to 77544.0! 2008-Oct-14 21:32:26 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (77543.0 - 77545.0)! 2008-Oct-14 21:42:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 21:42:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 21:42:21 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Oct-14 21:42:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 21:42:21 LOG5 end_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2008-Oct-14 21:42:21 LOG1 fixed_driftmap: New position: year = 2008.7909771655641 RA = 22:50:44.2 RA/Dec = 22:51:12.2 +08:48:35.6 2008-Oct-14 21:42:21 NOTE fixed_driftmap: Correcting ZA to 9:32:38.1 ... 2008-Oct-14 21:42:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5439155463 -CF 2008-Oct-14 21:42:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 21:42:21 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 21:42:21 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2008-Oct-14 21:42:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 21:42:21 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 21:42:21 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2008-Oct-14 21:42:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 21:42:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 21:42:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 21:42:21 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 21:42:21 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Oct-14 21:42:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5439155463 -CF 2008-Oct-14 21:42:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:42:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 21:42:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 21:42:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:42:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 21:42:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 21:42:21 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Oct-14 21:42:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 21:42:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 21:42:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 21:42:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 21:42:21 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Oct-14 21:42:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:42:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 21:42:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 21:42:22 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Oct-14 21:42:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 21:42:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 21:42:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 21:42:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 21:42:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 21:42:22 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Oct-14 21:42:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 21:42:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 21:42:22 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Oct-14 21:42:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 21:42:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 21:42:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 21:42:22 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2008-Oct-14 21:42:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 21:42:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 21:42:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 21:42:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 21:42:22 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Oct-14 21:42:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 21:42:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 21:42:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 21:42:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 21:42:22 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Oct-14 21:42:22 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 21:42:22 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 21:42:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 21:42:22 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2008-Oct-14 21:42:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 21:42:22 INFO2 take_data: Starting WAPP scan: 828800283 2008-Oct-14 21:42:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 21:42:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 21:42:22 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2008-Oct-14 21:42:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 21:42:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6143.00 2008-Oct-14 21:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 21:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 21:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 21:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 21:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 21:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 21:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 21:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 21:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 21:42:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 21:42:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 21:42:24 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2008-Oct-14 21:42:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 21:42:24 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2008-Oct-14 21:42:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 21:42:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 21:42:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 21:42:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 21:42:24 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Oct-14 21:42:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 21:42:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 21:42:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 21:42:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 21:42:24 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Oct-14 21:42:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 21:42:24 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 21:42:24 LOG5 finish_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2008-Oct-14 21:42:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 21:42:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 21:42:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 21:42:24 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2008-Oct-14 21:42:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2008-Oct-14 21:42:24 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2008-Oct-14 21:42:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:42:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:42:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:42:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:42:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 21:42:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 21:42:25 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 21:42:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 21:42:25 LOG5 begin_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2008-Oct-14 21:42:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 21:42:25 INFO2 take_data: Starting WAPP scan: 828800284 2008-Oct-14 21:42:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 21:42:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 21:42:25 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Oct-14 21:42:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 21:42:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 21:42:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6146.00 2008-Oct-14 21:42:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0022.fits 2008-Oct-14 21:42:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0022.fits} 2008-Oct-14 21:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 21:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 21:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 21:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 21:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 21:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 21:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 21:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 21:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 21:52:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 21:52:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 21:52:26 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Oct-14 21:52:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 21:52:26 LOG5 end_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2008-Oct-14 21:52:26 LOG1 fixed_driftmap: New position: year = 2008.7909963368572 RA = 23:00:50.8 RA/Dec = 23:01:18.9 +08:48:38.0 2008-Oct-14 21:52:26 NOTE fixed_driftmap: Correcting ZA to 9:32:35.7 ... 2008-Oct-14 21:52:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5432518166 -CF 2008-Oct-14 21:52:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 21:52:26 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 21:52:26 LOG5 begin_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2008-Oct-14 21:52:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 21:52:26 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 21:52:26 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Oct-14 21:52:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 21:52:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 21:52:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 21:52:26 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 21:52:26 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Oct-14 21:52:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5432518166 -CF 2008-Oct-14 21:52:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:52:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 21:52:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 21:52:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:52:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 21:52:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 21:52:26 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Oct-14 21:52:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 21:52:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 21:52:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 21:52:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 21:52:26 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Oct-14 21:52:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 21:52:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 21:52:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 21:52:27 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Oct-14 21:52:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 21:52:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 21:52:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 21:52:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 21:52:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 21:52:27 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Oct-14 21:52:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 21:52:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 21:52:27 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Oct-14 21:52:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 21:52:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 21:52:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 21:52:27 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Oct-14 21:52:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 21:52:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 21:52:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 21:52:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 21:52:27 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Oct-14 21:52:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 21:52:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 21:52:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 21:52:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 21:52:27 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Oct-14 21:52:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 21:52:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 21:52:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 21:52:27 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2008-Oct-14 21:52:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 21:52:27 INFO2 take_data: Starting WAPP scan: 828800285 2008-Oct-14 21:52:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 21:52:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 21:52:27 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Oct-14 21:52:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 21:52:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6748.00 2008-Oct-14 21:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 21:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 21:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 21:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 21:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 21:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 21:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 21:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 21:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 21:52:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 21:52:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 21:52:29 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Oct-14 21:52:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 21:52:29 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2008-Oct-14 21:52:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 21:52:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 21:52:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 21:52:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 21:52:29 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Oct-14 21:52:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 21:52:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 21:52:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 21:52:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 21:52:30 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Oct-14 21:52:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 21:52:30 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 21:52:30 LOG5 finish_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2008-Oct-14 21:52:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 21:52:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 21:52:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 21:52:30 LOG5 end_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2008-Oct-14 21:52:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2008-Oct-14 21:52:30 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2008-Oct-14 21:52:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:52:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:52:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:52:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 21:52:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 21:52:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 21:52:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 21:52:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 21:52:30 LOG5 begin_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2008-Oct-14 21:52:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 21:52:30 INFO2 take_data: Starting WAPP scan: 828800286 2008-Oct-14 21:52:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 21:52:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 21:52:30 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Oct-14 21:52:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 21:52:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 21:52:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6751.00 2008-Oct-14 21:52:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0023.fits 2008-Oct-14 21:52:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0023.fits} 2008-Oct-14 21:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 21:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 21:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 21:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 21:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 21:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 21:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 21:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 21:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 22:02:22 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:02:22.299 (seconds: 79342.299)!} 2008-Oct-14 22:02:22 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:02:22.299 (seconds: 79342.299)! 2008-Oct-14 22:02:23 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 79341.0 to 79342.0! 2008-Oct-14 22:02:24 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (79341.0 - 79343.0)! 2008-Oct-14 22:02:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 22:02:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 22:02:31 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Oct-14 22:02:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 22:02:31 LOG5 end_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2008-Oct-14 22:02:31 LOG1 fixed_driftmap: New position: year = 2008.7910155081502 RA = 23:10:57.3 RA/Dec = 23:11:25.6 +08:48:40.0 2008-Oct-14 22:02:31 NOTE fixed_driftmap: Correcting ZA to 9:32:33.7 ... 2008-Oct-14 22:02:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5426824785 -CF 2008-Oct-14 22:02:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 22:02:31 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 22:02:31 LOG5 begin_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2008-Oct-14 22:02:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 22:02:31 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 22:02:31 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Oct-14 22:02:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 22:02:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 22:02:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 22:02:31 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 22:02:31 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Oct-14 22:02:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5426824785 -CF 2008-Oct-14 22:02:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:02:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 22:02:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 22:02:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:02:32 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 22:02:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 22:02:32 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Oct-14 22:02:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 22:02:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 22:02:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 22:02:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 22:02:32 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Oct-14 22:02:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:02:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 22:02:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 22:02:32 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Oct-14 22:02:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 22:02:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 22:02:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 22:02:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 22:02:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 22:02:32 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Oct-14 22:02:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 22:02:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 22:02:32 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Oct-14 22:02:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 22:02:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 22:02:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 22:02:32 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Oct-14 22:02:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 22:02:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 22:02:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 22:02:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 22:02:32 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Oct-14 22:02:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 22:02:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 22:02:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 22:02:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 22:02:32 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Oct-14 22:02:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 22:02:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 22:02:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 22:02:32 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Oct-14 22:02:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 22:02:32 INFO2 take_data: Starting WAPP scan: 828800287 2008-Oct-14 22:02:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 22:02:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 22:02:32 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Oct-14 22:02:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 22:02:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7353.00 2008-Oct-14 22:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 22:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 22:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 22:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 22:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 22:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 22:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 22:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 22:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 22:02:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 22:02:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 22:02:34 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Oct-14 22:02:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 22:02:34 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Oct-14 22:02:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 22:02:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 22:02:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 22:02:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 22:02:34 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Oct-14 22:02:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 22:02:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 22:02:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 22:02:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 22:02:34 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Oct-14 22:02:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 22:02:34 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 22:02:34 LOG5 finish_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2008-Oct-14 22:02:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 22:02:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 22:02:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 22:02:34 LOG5 end_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2008-Oct-14 22:02:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2008-Oct-14 22:02:34 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2008-Oct-14 22:02:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:02:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:02:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:02:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:02:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 22:02:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 22:02:35 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 22:02:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 22:02:35 LOG5 begin_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2008-Oct-14 22:02:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 22:02:35 INFO2 take_data: Starting WAPP scan: 828800288 2008-Oct-14 22:02:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 22:02:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 22:02:35 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Oct-14 22:02:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 22:02:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 22:02:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7356.00 2008-Oct-14 22:02:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0024.fits 2008-Oct-14 22:02:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0024.fits} 2008-Oct-14 22:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 22:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 22:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 22:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 22:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 22:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 22:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 22:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 22:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 22:12:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 22:12:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 22:12:36 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Oct-14 22:12:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 22:12:36 LOG5 end_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2008-Oct-14 22:12:36 LOG1 fixed_driftmap: New position: year = 2008.7910346794433 RA = 23:21:03.9 RA/Dec = 23:21:32.2 +08:48:41.8 2008-Oct-14 22:12:36 NOTE fixed_driftmap: Correcting ZA to 9:32:32.0 ... 2008-Oct-14 22:12:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5422086405 -CF 2008-Oct-14 22:12:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 22:12:36 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 22:12:36 LOG5 begin_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2008-Oct-14 22:12:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 22:12:36 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 22:12:36 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2008-Oct-14 22:12:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 22:12:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 22:12:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 22:12:36 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 22:12:36 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Oct-14 22:12:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5422086405 -CF 2008-Oct-14 22:12:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:12:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 22:12:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 22:12:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:12:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 22:12:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 22:12:36 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Oct-14 22:12:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 22:12:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 22:12:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 22:12:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 22:12:36 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2008-Oct-14 22:12:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:12:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 22:12:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 22:12:37 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2008-Oct-14 22:12:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 22:12:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 22:12:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 22:12:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 22:12:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 22:12:37 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Oct-14 22:12:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 22:12:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 22:12:37 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Oct-14 22:12:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 22:12:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 22:12:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 22:12:37 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2008-Oct-14 22:12:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 22:12:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 22:12:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 22:12:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 22:12:37 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Oct-14 22:12:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 22:12:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 22:12:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 22:12:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 22:12:37 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Oct-14 22:12:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 22:12:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 22:12:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 22:12:37 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2008-Oct-14 22:12:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 22:12:37 INFO2 take_data: Starting WAPP scan: 828800289 2008-Oct-14 22:12:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 22:12:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 22:12:37 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Oct-14 22:12:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 22:12:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7958.00 2008-Oct-14 22:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 22:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 22:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 22:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 22:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 22:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 22:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 22:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 22:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 22:12:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 22:12:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 22:12:39 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Oct-14 22:12:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 22:12:39 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2008-Oct-14 22:12:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 22:12:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 22:12:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 22:12:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 22:12:39 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Oct-14 22:12:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 22:12:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 22:12:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 22:12:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 22:12:40 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Oct-14 22:12:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 22:12:40 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 22:12:40 LOG5 finish_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2008-Oct-14 22:12:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 22:12:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 22:12:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 22:12:40 LOG5 end_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2008-Oct-14 22:12:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2008-Oct-14 22:12:40 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2008-Oct-14 22:12:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:12:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:12:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:12:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:12:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 22:12:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 22:12:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 22:12:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 22:12:40 LOG5 begin_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2008-Oct-14 22:12:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 22:12:40 INFO2 take_data: Starting WAPP scan: 828800290 2008-Oct-14 22:12:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 22:12:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 22:12:40 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Oct-14 22:12:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 22:12:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 22:12:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7961.00 2008-Oct-14 22:12:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0025.fits 2008-Oct-14 22:12:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0025.fits} 2008-Oct-14 22:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 22:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 22:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 22:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 22:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 22:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 22:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 22:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 22:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 22:22:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 22:22:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 22:22:41 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Oct-14 22:22:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 22:22:41 LOG5 end_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2008-Oct-14 22:22:41 LOG1 fixed_driftmap: New position: year = 2008.7910538507365 RA = 23:31:10.4 RA/Dec = 23:31:38.9 +08:48:43.1 2008-Oct-14 22:22:41 NOTE fixed_driftmap: Correcting ZA to 9:32:30.6 ... 2008-Oct-14 22:22:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5418312229 -CF 2008-Oct-14 22:22:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 22:22:41 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 22:22:41 LOG5 begin_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2008-Oct-14 22:22:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 22:22:41 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 22:22:41 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Oct-14 22:22:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 22:22:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 22:22:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 22:22:41 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 22:22:41 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Oct-14 22:22:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5418312229 -CF 2008-Oct-14 22:22:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:22:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 22:22:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 22:22:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:22:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 22:22:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 22:22:42 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Oct-14 22:22:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 22:22:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 22:22:42 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 22:22:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 22:22:42 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2008-Oct-14 22:22:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:22:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 22:22:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 22:22:42 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2008-Oct-14 22:22:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 22:22:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 22:22:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 22:22:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 22:22:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 22:22:42 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2008-Oct-14 22:22:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 22:22:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 22:22:42 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2008-Oct-14 22:22:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 22:22:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 22:22:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 22:22:42 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Oct-14 22:22:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 22:22:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 22:22:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 22:22:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 22:22:42 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Oct-14 22:22:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 22:22:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 22:22:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 22:22:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 22:22:42 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Oct-14 22:22:42 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 22:22:42 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 22:22:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 22:22:42 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2008-Oct-14 22:22:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 22:22:42 INFO2 take_data: Starting WAPP scan: 828800291 2008-Oct-14 22:22:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 22:22:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 22:22:42 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2008-Oct-14 22:22:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 22:22:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8563.00 2008-Oct-14 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 22:22:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 22:22:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 22:22:44 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2008-Oct-14 22:22:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 22:22:44 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2008-Oct-14 22:22:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 22:22:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 22:22:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 22:22:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 22:22:44 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Oct-14 22:22:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 22:22:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 22:22:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 22:22:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 22:22:44 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Oct-14 22:22:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 22:22:44 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 22:22:44 LOG5 finish_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2008-Oct-14 22:22:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 22:22:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 22:22:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 22:22:44 LOG5 end_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2008-Oct-14 22:22:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2008-Oct-14 22:22:45 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2008-Oct-14 22:22:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:22:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:22:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:22:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:22:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 22:22:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 22:22:45 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 22:22:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 22:22:45 LOG5 begin_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2008-Oct-14 22:22:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 22:22:45 INFO2 take_data: Starting WAPP scan: 828800292 2008-Oct-14 22:22:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 22:22:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 22:22:45 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Oct-14 22:22:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 22:22:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 22:22:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8566.00 2008-Oct-14 22:22:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0026.fits 2008-Oct-14 22:22:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0026.fits} 2008-Oct-14 22:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 22:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 22:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 22:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 22:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 22:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 22:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 22:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 22:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 22:32:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 22:32:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 22:32:46 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Oct-14 22:32:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 22:32:46 LOG5 end_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2008-Oct-14 22:32:46 LOG1 fixed_driftmap: New position: year = 2008.7910730220297 RA = 23:41:17.0 RA/Dec = 23:41:45.5 +08:48:44.1 2008-Oct-14 22:32:46 NOTE fixed_driftmap: Correcting ZA to 9:32:29.6 ... 2008-Oct-14 22:32:46 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5415509624 -CF 2008-Oct-14 22:32:46 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 22:32:46 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 22:32:46 LOG5 begin_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2008-Oct-14 22:32:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 22:32:46 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 22:32:46 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Oct-14 22:32:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 22:32:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 22:32:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 22:32:46 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 22:32:46 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Oct-14 22:32:46 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5415509624 -CF 2008-Oct-14 22:32:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:32:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 22:32:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 22:32:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:32:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 22:32:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 22:32:46 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Oct-14 22:32:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 22:32:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 22:32:46 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 22:32:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 22:32:46 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Oct-14 22:32:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:32:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 22:32:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 22:32:47 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Oct-14 22:32:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 22:32:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 22:32:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 22:32:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 22:32:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 22:32:47 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2008-Oct-14 22:32:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 22:32:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 22:32:47 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2008-Oct-14 22:32:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 22:32:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 22:32:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 22:32:47 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Oct-14 22:32:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 22:32:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 22:32:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 22:32:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 22:32:47 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Oct-14 22:32:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 22:32:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 22:32:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 22:32:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 22:32:47 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Oct-14 22:32:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 22:32:47 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 22:32:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 22:32:47 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Oct-14 22:32:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 22:32:47 INFO2 take_data: Starting WAPP scan: 828800293 2008-Oct-14 22:32:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 22:32:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 22:32:47 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Oct-14 22:32:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 22:32:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9168.00 2008-Oct-14 22:32:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 22:32:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 22:32:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 22:32:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 22:32:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 22:32:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 22:32:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 22:32:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 22:32:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 22:32:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 22:32:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 22:32:49 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Oct-14 22:32:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 22:32:49 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Oct-14 22:32:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 22:32:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 22:32:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 22:32:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 22:32:49 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Oct-14 22:32:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 22:32:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 22:32:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 22:32:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 22:32:49 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Oct-14 22:32:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 22:32:49 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 22:32:49 LOG5 finish_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2008-Oct-14 22:32:49 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 22:32:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 22:32:49 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 22:32:49 LOG5 end_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2008-Oct-14 22:32:49 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2008-Oct-14 22:32:49 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2008-Oct-14 22:32:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:32:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:32:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:32:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:32:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 22:32:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 22:32:50 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 22:32:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 22:32:50 LOG5 begin_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Oct-14 22:32:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 22:32:50 INFO2 take_data: Starting WAPP scan: 828800294 2008-Oct-14 22:32:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 22:32:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 22:32:50 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Oct-14 22:32:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 22:32:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 22:32:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9171.00 2008-Oct-14 22:32:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0027.fits 2008-Oct-14 22:32:50 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0027.fits} 2008-Oct-14 22:32:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 22:32:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 22:32:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 22:32:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 22:32:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 22:32:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 22:32:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 22:32:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 22:32:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 22:42:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 22:42:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 22:42:51 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Oct-14 22:42:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 22:42:51 LOG5 end_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Oct-14 22:42:51 LOG1 fixed_driftmap: New position: year = 2008.7910921933228 RA = 23:51:23.5 RA/Dec = 23:51:52.2 +08:48:44.8 2008-Oct-14 22:42:51 NOTE fixed_driftmap: Correcting ZA to 9:32:28.9 ... 2008-Oct-14 22:42:51 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5413684070 -CF 2008-Oct-14 22:42:51 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 22:42:51 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 22:42:51 LOG5 begin_task: Level: (2) ID = <10256> Status = 0 0 0 0 ok 2008-Oct-14 22:42:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 22:42:51 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 22:42:51 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Oct-14 22:42:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 22:42:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 22:42:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 22:42:51 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 22:42:51 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Oct-14 22:42:51 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5413684070 -CF 2008-Oct-14 22:42:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:42:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 22:42:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 22:42:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:42:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 22:42:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 22:42:51 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Oct-14 22:42:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 22:42:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 22:42:51 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 22:42:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 22:42:51 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Oct-14 22:42:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:42:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 22:42:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 22:42:52 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Oct-14 22:42:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 22:42:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 22:42:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 22:42:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 22:42:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 22:42:52 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-Oct-14 22:42:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 22:42:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 22:42:52 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-Oct-14 22:42:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 22:42:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 22:42:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 22:42:52 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Oct-14 22:42:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 22:42:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 22:42:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 22:42:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 22:42:52 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Oct-14 22:42:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 22:42:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 22:42:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 22:42:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 22:42:52 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Oct-14 22:42:52 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 22:42:52 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 22:42:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 22:42:52 LOG5 begin_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2008-Oct-14 22:42:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 22:42:52 INFO2 take_data: Starting WAPP scan: 828800295 2008-Oct-14 22:42:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 22:42:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 22:42:52 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Oct-14 22:42:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 22:42:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9773.00 2008-Oct-14 22:42:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 22:42:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 22:42:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 22:42:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 22:42:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 22:42:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 22:42:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 22:42:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 22:42:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 22:42:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 22:42:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 22:42:54 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Oct-14 22:42:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 22:42:54 LOG5 end_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2008-Oct-14 22:42:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 22:42:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 22:42:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 22:42:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 22:42:54 LOG5 begin_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2008-Oct-14 22:42:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 22:42:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 22:42:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 22:42:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 22:42:54 LOG5 end_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2008-Oct-14 22:42:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 22:42:54 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 22:42:54 LOG5 finish_task: Level: (2) ID = <10256> Status = 0 0 0 0 ok 2008-Oct-14 22:42:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 22:42:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 22:42:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 22:42:54 LOG5 end_task: Level: (2) ID = <10256> Status = 0 0 0 0 ok 2008-Oct-14 22:42:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2008-Oct-14 22:42:54 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2008-Oct-14 22:42:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:42:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:42:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:42:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:42:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 22:42:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 22:42:55 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 22:42:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 22:42:55 LOG5 begin_task: Level: (2) ID = <10265> Status = 0 0 0 0 ok 2008-Oct-14 22:42:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 22:42:55 INFO2 take_data: Starting WAPP scan: 828800296 2008-Oct-14 22:42:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 22:42:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 22:42:55 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Oct-14 22:42:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 22:42:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 22:42:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9776.00 2008-Oct-14 22:42:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0028.fits 2008-Oct-14 22:42:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0028.fits} 2008-Oct-14 22:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 22:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 22:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 22:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 22:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 22:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 22:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 22:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 22:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 22:52:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 22:52:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 22:52:56 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Oct-14 22:52:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 22:52:56 LOG5 end_task: Level: (2) ID = <10265> Status = 0 0 0 0 ok 2008-Oct-14 22:52:56 LOG1 fixed_driftmap: New position: year = 2008.791111364616 RA = 00:01:30.1 RA/Dec = 00:01:58.8 +08:48:45.1 2008-Oct-14 22:52:56 NOTE fixed_driftmap: Correcting ZA to 9:32:28.6 ... 2008-Oct-14 22:52:56 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5412839121 -CF 2008-Oct-14 22:52:56 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 22:52:56 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 22:52:56 LOG5 begin_task: Level: (2) ID = <10267> Status = 0 0 0 0 ok 2008-Oct-14 22:52:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 22:52:56 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 22:52:56 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Oct-14 22:52:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 22:52:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 22:52:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 22:52:56 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 22:52:56 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Oct-14 22:52:56 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5412839121 -CF 2008-Oct-14 22:52:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:52:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 22:52:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 22:52:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:52:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 22:52:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 22:52:56 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Oct-14 22:52:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 22:52:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 22:52:56 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 22:52:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 22:52:56 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2008-Oct-14 22:52:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 22:52:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 22:52:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 22:52:57 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2008-Oct-14 22:52:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 22:52:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 22:52:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 22:52:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 22:52:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 22:52:57 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Oct-14 22:52:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 22:52:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 22:52:57 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Oct-14 22:52:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 22:52:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 22:52:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 22:52:57 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Oct-14 22:52:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 22:52:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 22:52:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 22:52:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 22:52:57 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Oct-14 22:52:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 22:52:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 22:52:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 22:52:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 22:52:57 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Oct-14 22:52:57 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 22:52:57 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 22:52:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 22:52:57 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Oct-14 22:52:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 22:52:57 INFO2 take_data: Starting WAPP scan: 828800297 2008-Oct-14 22:52:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 22:52:57 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 22:52:57 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Oct-14 22:52:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 22:52:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10378.00 2008-Oct-14 22:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 22:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 22:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 22:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 22:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 22:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 22:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 22:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 22:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 22:52:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 22:52:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 22:52:59 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Oct-14 22:52:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 22:52:59 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Oct-14 22:52:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 22:52:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 22:52:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 22:52:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 22:52:59 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-Oct-14 22:52:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 22:52:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 22:52:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 22:52:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 22:52:59 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-Oct-14 22:52:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 22:52:59 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 22:52:59 LOG5 finish_task: Level: (2) ID = <10267> Status = 0 0 0 0 ok 2008-Oct-14 22:52:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 22:52:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 22:52:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 22:52:59 LOG5 end_task: Level: (2) ID = <10267> Status = 0 0 0 0 ok 2008-Oct-14 22:52:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2008-Oct-14 22:52:59 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2008-Oct-14 22:52:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:52:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:52:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:53:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 22:53:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 22:53:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 22:53:00 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 22:53:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 22:53:00 LOG5 begin_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2008-Oct-14 22:53:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 22:53:00 INFO2 take_data: Starting WAPP scan: 828800298 2008-Oct-14 22:53:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 22:53:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 22:53:00 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Oct-14 22:53:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 22:53:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 22:53:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10381.00 2008-Oct-14 22:53:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0029.fits 2008-Oct-14 22:53:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0029.fits} 2008-Oct-14 22:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 22:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 22:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 22:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 22:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 22:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 22:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 22:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 22:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 23:03:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 23:03:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 23:03:01 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Oct-14 23:03:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 23:03:01 LOG5 end_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2008-Oct-14 23:03:01 LOG1 fixed_driftmap: New position: year = 2008.7911305359089 RA = 00:11:36.6 RA/Dec = 00:12:05.5 +08:48:45.0 2008-Oct-14 23:03:01 NOTE fixed_driftmap: Correcting ZA to 9:32:28.7 ... 2008-Oct-14 23:03:01 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5412976424 -CF 2008-Oct-14 23:03:01 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 23:03:01 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 23:03:01 LOG5 begin_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2008-Oct-14 23:03:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 23:03:01 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 23:03:01 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Oct-14 23:03:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 23:03:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 23:03:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 23:03:01 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 23:03:01 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Oct-14 23:03:01 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5412976424 -CF 2008-Oct-14 23:03:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:03:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 23:03:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 23:03:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:03:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 23:03:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 23:03:01 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Oct-14 23:03:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 23:03:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 23:03:01 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 23:03:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 23:03:01 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Oct-14 23:03:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:03:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 23:03:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 23:03:02 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Oct-14 23:03:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 23:03:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 23:03:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 23:03:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 23:03:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 23:03:02 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Oct-14 23:03:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 23:03:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 23:03:02 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Oct-14 23:03:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 23:03:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 23:03:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 23:03:02 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Oct-14 23:03:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 23:03:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 23:03:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 23:03:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 23:03:02 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Oct-14 23:03:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 23:03:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 23:03:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 23:03:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 23:03:02 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Oct-14 23:03:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 23:03:02 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 23:03:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 23:03:02 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Oct-14 23:03:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 23:03:02 INFO2 take_data: Starting WAPP scan: 828800299 2008-Oct-14 23:03:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 23:03:02 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 23:03:02 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Oct-14 23:03:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 23:03:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10983.00 2008-Oct-14 23:03:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 23:03:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 23:03:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 23:03:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 23:03:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 23:03:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 23:03:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 23:03:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 23:03:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 23:03:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 23:03:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 23:03:04 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Oct-14 23:03:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 23:03:04 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Oct-14 23:03:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 23:03:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 23:03:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 23:03:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 23:03:04 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Oct-14 23:03:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 23:03:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 23:03:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 23:03:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 23:03:04 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Oct-14 23:03:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 23:03:04 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 23:03:04 LOG5 finish_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2008-Oct-14 23:03:04 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 23:03:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 23:03:04 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 23:03:04 LOG5 end_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2008-Oct-14 23:03:04 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2008-Oct-14 23:03:04 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2008-Oct-14 23:03:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:03:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:03:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:03:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:03:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 23:03:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 23:03:05 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 23:03:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 23:03:05 LOG5 begin_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2008-Oct-14 23:03:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 23:03:05 INFO2 take_data: Starting WAPP scan: 828800300 2008-Oct-14 23:03:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 23:03:05 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 23:03:05 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Oct-14 23:03:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 23:03:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 23:03:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10986.00 2008-Oct-14 23:03:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0030.fits 2008-Oct-14 23:03:05 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0030.fits} 2008-Oct-14 23:03:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 23:03:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 23:03:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 23:03:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 23:03:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 23:03:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 23:03:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 23:03:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 23:03:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 23:13:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 23:13:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 23:13:06 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Oct-14 23:13:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 23:13:06 LOG5 end_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2008-Oct-14 23:13:06 LOG1 fixed_driftmap: New position: year = 2008.7911497072021 RA = 00:21:43.2 RA/Dec = 00:22:12.2 +08:48:44.6 2008-Oct-14 23:13:06 NOTE fixed_driftmap: Correcting ZA to 9:32:29.1 ... 2008-Oct-14 23:13:06 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5414095721 -CF 2008-Oct-14 23:13:06 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 23:13:06 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 23:13:06 LOG5 begin_task: Level: (2) ID = <10289> Status = 0 0 0 0 ok 2008-Oct-14 23:13:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 23:13:06 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 23:13:06 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2008-Oct-14 23:13:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 23:13:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 23:13:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 23:13:06 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 23:13:06 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2008-Oct-14 23:13:06 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5414095721 -CF 2008-Oct-14 23:13:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:13:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 23:13:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 23:13:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:13:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 23:13:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 23:13:06 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2008-Oct-14 23:13:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 23:13:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 23:13:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 23:13:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 23:13:07 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Oct-14 23:13:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 23:13:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 23:13:07 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Oct-14 23:13:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 23:13:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 23:13:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 23:13:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 23:13:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 23:13:07 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Oct-14 23:13:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:13:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 23:13:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 23:13:07 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Oct-14 23:13:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 23:13:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 23:13:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 23:13:07 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2008-Oct-14 23:13:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 23:13:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 23:13:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 23:13:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 23:13:07 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Oct-14 23:13:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 23:13:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 23:13:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 23:13:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 23:13:07 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Oct-14 23:13:07 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 23:13:07 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 23:13:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 23:13:07 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Oct-14 23:13:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 23:13:07 INFO2 take_data: Starting WAPP scan: 828800301 2008-Oct-14 23:13:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 23:13:07 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 23:13:07 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Oct-14 23:13:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 23:13:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11588.00 2008-Oct-14 23:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 23:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 23:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 23:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 23:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 23:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 23:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 23:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 23:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 23:13:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 23:13:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 23:13:09 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Oct-14 23:13:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 23:13:09 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Oct-14 23:13:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 23:13:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 23:13:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 23:13:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 23:13:09 LOG5 begin_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Oct-14 23:13:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 23:13:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 23:13:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 23:13:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 23:13:09 LOG5 end_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Oct-14 23:13:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 23:13:09 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 23:13:09 LOG5 finish_task: Level: (2) ID = <10289> Status = 0 0 0 0 ok 2008-Oct-14 23:13:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 23:13:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 23:13:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 23:13:09 LOG5 end_task: Level: (2) ID = <10289> Status = 0 0 0 0 ok 2008-Oct-14 23:13:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2008-Oct-14 23:13:09 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2008-Oct-14 23:13:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:13:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:13:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:13:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:13:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 23:13:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 23:13:10 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 23:13:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 23:13:10 LOG5 begin_task: Level: (2) ID = <10298> Status = 0 0 0 0 ok 2008-Oct-14 23:13:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 23:13:10 INFO2 take_data: Starting WAPP scan: 828800302 2008-Oct-14 23:13:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 23:13:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 23:13:10 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Oct-14 23:13:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 23:13:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 23:13:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11591.00 2008-Oct-14 23:13:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0031.fits 2008-Oct-14 23:13:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0031.fits} 2008-Oct-14 23:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 23:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 23:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 23:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 23:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 23:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 23:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 23:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 23:13:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 23:23:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 23:23:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 23:23:11 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Oct-14 23:23:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 23:23:11 LOG5 end_task: Level: (2) ID = <10298> Status = 0 0 0 0 ok 2008-Oct-14 23:23:11 LOG1 fixed_driftmap: New position: year = 2008.7911688784952 RA = 00:31:49.7 RA/Dec = 00:32:18.8 +08:48:43.9 2008-Oct-14 23:23:11 NOTE fixed_driftmap: Correcting ZA to 9:32:29.8 ... 2008-Oct-14 23:23:11 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5416194862 -CF 2008-Oct-14 23:23:11 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 23:23:11 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 23:23:11 LOG5 begin_task: Level: (2) ID = <10300> Status = 0 0 0 0 ok 2008-Oct-14 23:23:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 23:23:11 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 23:23:11 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Oct-14 23:23:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 23:23:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 23:23:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 23:23:11 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 23:23:11 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Oct-14 23:23:11 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5416194862 -CF 2008-Oct-14 23:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:23:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 23:23:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 23:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:23:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 23:23:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 23:23:11 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Oct-14 23:23:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 23:23:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 23:23:11 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 23:23:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 23:23:11 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2008-Oct-14 23:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:23:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 23:23:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 23:23:12 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2008-Oct-14 23:23:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 23:23:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 23:23:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 23:23:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 23:23:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 23:23:12 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Oct-14 23:23:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 23:23:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 23:23:12 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Oct-14 23:23:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 23:23:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 23:23:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 23:23:12 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Oct-14 23:23:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 23:23:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 23:23:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 23:23:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 23:23:12 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Oct-14 23:23:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 23:23:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 23:23:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 23:23:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 23:23:12 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Oct-14 23:23:12 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 23:23:12 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 23:23:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 23:23:12 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Oct-14 23:23:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 23:23:12 INFO2 take_data: Starting WAPP scan: 828800303 2008-Oct-14 23:23:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 23:23:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 23:23:12 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2008-Oct-14 23:23:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 23:23:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12193.00 2008-Oct-14 23:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 23:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 23:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 23:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 23:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 23:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 23:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 23:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 23:23:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 23:23:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 23:23:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 23:23:14 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2008-Oct-14 23:23:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 23:23:14 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Oct-14 23:23:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 23:23:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 23:23:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 23:23:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 23:23:14 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Oct-14 23:23:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 23:23:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 23:23:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 23:23:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 23:23:14 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Oct-14 23:23:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 23:23:14 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 23:23:14 LOG5 finish_task: Level: (2) ID = <10300> Status = 0 0 0 0 ok 2008-Oct-14 23:23:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 23:23:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 23:23:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 23:23:14 LOG5 end_task: Level: (2) ID = <10300> Status = 0 0 0 0 ok 2008-Oct-14 23:23:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2008-Oct-14 23:23:14 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2008-Oct-14 23:23:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:23:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:23:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:23:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:23:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 23:23:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 23:23:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 23:23:15 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 23:23:15 LOG5 begin_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2008-Oct-14 23:23:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 23:23:15 INFO2 take_data: Starting WAPP scan: 828800304 2008-Oct-14 23:23:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 23:23:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 23:23:15 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Oct-14 23:23:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 23:23:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 23:23:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12196.00 2008-Oct-14 23:23:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0032.fits 2008-Oct-14 23:23:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0032.fits} 2008-Oct-14 23:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 23:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 23:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 23:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 23:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 23:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 23:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 23:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 23:23:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 23:33:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 23:33:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 23:33:16 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Oct-14 23:33:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 23:33:16 LOG5 end_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2008-Oct-14 23:33:16 LOG1 fixed_driftmap: New position: year = 2008.7911880497884 RA = 00:41:56.3 RA/Dec = 00:42:25.5 +08:48:42.8 2008-Oct-14 23:33:16 NOTE fixed_driftmap: Correcting ZA to 9:32:30.9 ... 2008-Oct-14 23:33:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5419269753 -CF 2008-Oct-14 23:33:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 23:33:16 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 23:33:16 LOG5 begin_task: Level: (2) ID = <10311> Status = 0 0 0 0 ok 2008-Oct-14 23:33:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 23:33:16 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 23:33:16 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-Oct-14 23:33:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 23:33:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 23:33:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 23:33:16 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 23:33:16 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Oct-14 23:33:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5419269753 -CF 2008-Oct-14 23:33:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:33:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 23:33:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 23:33:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:33:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 23:33:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 23:33:16 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Oct-14 23:33:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 23:33:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 23:33:16 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 23:33:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 23:33:16 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Oct-14 23:33:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:33:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 23:33:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 23:33:17 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Oct-14 23:33:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 23:33:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 23:33:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 23:33:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 23:33:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 23:33:17 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Oct-14 23:33:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 23:33:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 23:33:17 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Oct-14 23:33:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 23:33:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 23:33:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 23:33:17 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-Oct-14 23:33:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 23:33:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 23:33:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 23:33:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 23:33:17 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Oct-14 23:33:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 23:33:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 23:33:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 23:33:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 23:33:17 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Oct-14 23:33:17 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 23:33:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 23:33:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 23:33:17 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Oct-14 23:33:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 23:33:17 INFO2 take_data: Starting WAPP scan: 828800305 2008-Oct-14 23:33:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 23:33:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 23:33:17 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2008-Oct-14 23:33:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 23:33:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12798.00 2008-Oct-14 23:33:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 23:33:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 23:33:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 23:33:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 23:33:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 23:33:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 23:33:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 23:33:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 23:33:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 23:33:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 23:33:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 23:33:19 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2008-Oct-14 23:33:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 23:33:19 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Oct-14 23:33:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 23:33:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 23:33:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 23:33:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 23:33:19 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Oct-14 23:33:20 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 23:33:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 23:33:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 23:33:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 23:33:20 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Oct-14 23:33:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 23:33:20 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 23:33:20 LOG5 finish_task: Level: (2) ID = <10311> Status = 0 0 0 0 ok 2008-Oct-14 23:33:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 23:33:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 23:33:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 23:33:20 LOG5 end_task: Level: (2) ID = <10311> Status = 0 0 0 0 ok 2008-Oct-14 23:33:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2008-Oct-14 23:33:20 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2008-Oct-14 23:33:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:33:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:33:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:33:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:33:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 23:33:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 23:33:20 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 23:33:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 23:33:20 LOG5 begin_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2008-Oct-14 23:33:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 23:33:20 INFO2 take_data: Starting WAPP scan: 828800306 2008-Oct-14 23:33:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 23:33:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 23:33:20 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Oct-14 23:33:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 23:33:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 23:33:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12801.00 2008-Oct-14 23:33:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0033.fits 2008-Oct-14 23:33:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0033.fits} 2008-Oct-14 23:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 23:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 23:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 23:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 23:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 23:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 23:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 23:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 23:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 23:43:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 23:43:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 23:43:21 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Oct-14 23:43:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 23:43:21 LOG5 end_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2008-Oct-14 23:43:21 LOG1 fixed_driftmap: New position: year = 2008.7912072210815 RA = 00:52:02.9 RA/Dec = 00:52:32.1 +08:48:41.3 2008-Oct-14 23:43:21 NOTE fixed_driftmap: Correcting ZA to 9:32:32.4 ... 2008-Oct-14 23:43:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5423314434 -CF 2008-Oct-14 23:43:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 23:43:21 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 23:43:21 LOG5 begin_task: Level: (2) ID = <10322> Status = 0 0 0 0 ok 2008-Oct-14 23:43:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 23:43:21 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 23:43:21 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2008-Oct-14 23:43:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 23:43:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 23:43:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 23:43:21 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 23:43:21 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Oct-14 23:43:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5423314434 -CF 2008-Oct-14 23:43:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:43:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 23:43:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 23:43:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:43:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 23:43:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 23:43:22 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Oct-14 23:43:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 23:43:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 23:43:22 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 23:43:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 23:43:22 LOG5 begin_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2008-Oct-14 23:43:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:43:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 23:43:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 23:43:23 LOG5 end_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2008-Oct-14 23:43:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 23:43:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 23:43:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 23:43:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 23:43:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 23:43:23 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Oct-14 23:43:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 23:43:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 23:43:23 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Oct-14 23:43:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 23:43:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 23:43:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 23:43:23 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2008-Oct-14 23:43:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 23:43:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 23:43:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 23:43:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 23:43:23 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-Oct-14 23:43:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 23:43:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 23:43:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 23:43:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 23:43:23 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-Oct-14 23:43:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 23:43:23 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 23:43:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 23:43:23 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2008-Oct-14 23:43:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 23:43:23 INFO2 take_data: Starting WAPP scan: 828800307 2008-Oct-14 23:43:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 23:43:23 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 23:43:23 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2008-Oct-14 23:43:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 23:43:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13404.00 2008-Oct-14 23:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 23:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 23:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 23:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 23:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 23:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 23:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 23:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 23:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 23:43:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 23:43:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 23:43:25 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2008-Oct-14 23:43:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 23:43:25 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2008-Oct-14 23:43:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 23:43:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 23:43:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 23:43:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 23:43:25 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2008-Oct-14 23:43:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 23:43:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 23:43:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 23:43:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 23:43:26 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2008-Oct-14 23:43:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 23:43:26 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 23:43:26 LOG5 finish_task: Level: (2) ID = <10322> Status = 0 0 0 0 ok 2008-Oct-14 23:43:26 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 23:43:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 23:43:26 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 23:43:26 LOG5 end_task: Level: (2) ID = <10322> Status = 0 0 0 0 ok 2008-Oct-14 23:43:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2008-Oct-14 23:43:26 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2008-Oct-14 23:43:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:43:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:43:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:43:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:43:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 23:43:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 23:43:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 23:43:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 23:43:26 LOG5 begin_task: Level: (2) ID = <10331> Status = 0 0 0 0 ok 2008-Oct-14 23:43:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 23:43:26 INFO2 take_data: Starting WAPP scan: 828800308 2008-Oct-14 23:43:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 23:43:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 23:43:26 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Oct-14 23:43:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 23:43:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 23:43:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13407.00 2008-Oct-14 23:43:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0034.fits 2008-Oct-14 23:43:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0034.fits} 2008-Oct-14 23:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 23:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 23:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 23:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 23:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 23:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 23:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 23:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 23:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 23:53:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 23:53:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 23:53:28 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Oct-14 23:53:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 23:53:28 LOG5 end_task: Level: (2) ID = <10331> Status = 0 0 0 0 ok 2008-Oct-14 23:53:28 LOG1 fixed_driftmap: New position: year = 2008.7912264240626 RA = 01:02:10.4 RA/Dec = 01:02:39.8 +08:48:39.5 2008-Oct-14 23:53:28 NOTE fixed_driftmap: Correcting ZA to 9:32:34.2 ... 2008-Oct-14 23:53:28 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5428330099 -CF 2008-Oct-14 23:53:28 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-14 23:53:28 START begin_task: Starting task 'WAPP calibration' 2008-Oct-14 23:53:28 LOG5 begin_task: Level: (2) ID = <10333> Status = 0 0 0 0 ok 2008-Oct-14 23:53:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-14 23:53:28 START begin_task: Starting task 'selecting calibration type' 2008-Oct-14 23:53:28 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2008-Oct-14 23:53:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-14 23:53:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-14 23:53:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 23:53:28 START begin_task: Starting task 'waiting on setcal' 2008-Oct-14 23:53:28 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Oct-14 23:53:29 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5428330099 -CF 2008-Oct-14 23:53:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-14 23:53:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-14 23:53:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:53:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:53:29 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-14 23:53:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-14 23:53:29 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Oct-14 23:53:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-14 23:53:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 23:53:29 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-14 23:53:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 23:53:29 LOG5 begin_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2008-Oct-14 23:53:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-14 23:53:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 23:53:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 23:53:29 LOG5 end_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2008-Oct-14 23:53:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 23:53:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-14 23:53:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-14 23:53:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-14 23:53:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-14 23:53:29 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2008-Oct-14 23:53:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-14 23:53:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-14 23:53:29 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2008-Oct-14 23:53:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-14 23:53:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-14 23:53:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-14 23:53:29 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2008-Oct-14 23:53:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-14 23:53:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-14 23:53:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-14 23:53:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 23:53:29 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Oct-14 23:53:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 23:53:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-14 23:53:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 23:53:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 23:53:29 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Oct-14 23:53:29 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-14 23:53:29 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-14 23:53:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 23:53:29 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Oct-14 23:53:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 23:53:29 INFO2 take_data: Starting WAPP scan: 828800309 2008-Oct-14 23:53:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-14 23:53:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 23:53:30 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Oct-14 23:53:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 23:53:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14011.00 2008-Oct-14 23:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 23:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 23:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 23:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 23:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 23:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 23:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 23:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 23:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-14 23:53:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-14 23:53:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-14 23:53:32 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Oct-14 23:53:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-14 23:53:32 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Oct-14 23:53:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-14 23:53:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-14 23:53:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-14 23:53:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-14 23:53:32 LOG5 begin_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2008-Oct-14 23:53:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-14 23:53:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-14 23:53:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-14 23:53:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-14 23:53:32 LOG5 end_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2008-Oct-14 23:53:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-14 23:53:32 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-14 23:53:32 LOG5 finish_task: Level: (2) ID = <10333> Status = 0 0 0 0 ok 2008-Oct-14 23:53:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-14 23:53:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-14 23:53:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-14 23:53:32 LOG5 end_task: Level: (2) ID = <10333> Status = 0 0 0 0 ok 2008-Oct-14 23:53:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 21 of 99 2008-Oct-14 23:53:33 LOG4 send_obs_status: To obs_status: <1> LOOP 21 2008-Oct-14 23:53:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:53:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:53:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:53:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-14 23:53:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-14 23:53:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-14 23:53:33 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-14 23:53:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-14 23:53:33 LOG5 begin_task: Level: (2) ID = <10342> Status = 0 0 0 0 ok 2008-Oct-14 23:53:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-14 23:53:33 INFO2 take_data: Starting WAPP scan: 828800310 2008-Oct-14 23:53:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-14 23:53:33 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-14 23:53:33 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Oct-14 23:53:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-14 23:53:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-14 23:53:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14014.00 2008-Oct-14 23:53:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20081014.a2010.0035.fits 2008-Oct-14 23:53:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081014.a2010.0035.fits} 2008-Oct-14 23:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-14 23:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-14 23:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-14 23:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-14 23:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-14 23:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-14 23:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-14 23:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-14 23:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-15 00:03:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-15 00:03:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-15 00:03:35 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Oct-15 00:03:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-15 00:03:35 LOG5 end_task: Level: (2) ID = <10342> Status = 0 0 0 0 ok 2008-Oct-15 00:03:35 LOG1 fixed_driftmap: New position: year = 2008.7912456587319 RA = 01:12:19.0 RA/Dec = 01:12:48.5 +08:48:37.3 2008-Oct-15 00:03:35 NOTE fixed_driftmap: Correcting ZA to 9:32:36.4 ... 2008-Oct-15 00:03:35 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5434311750 -CF 2008-Oct-15 00:03:35 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-15 00:03:35 START begin_task: Starting task 'WAPP calibration' 2008-Oct-15 00:03:35 LOG5 begin_task: Level: (2) ID = <10344> Status = 0 0 0 0 ok 2008-Oct-15 00:03:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-15 00:03:35 START begin_task: Starting task 'selecting calibration type' 2008-Oct-15 00:03:35 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Oct-15 00:03:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-15 00:03:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-15 00:03:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-15 00:03:35 START begin_task: Starting task 'waiting on setcal' 2008-Oct-15 00:03:35 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Oct-15 00:03:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5434311750 -CF 2008-Oct-15 00:03:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-15 00:03:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-15 00:03:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-15 00:03:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-15 00:03:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-15 00:03:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-15 00:03:36 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Oct-15 00:03:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-15 00:03:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-15 00:03:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-15 00:03:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-15 00:03:36 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Oct-15 00:03:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-15 00:03:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-15 00:03:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-15 00:03:36 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-Oct-15 00:03:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-15 00:03:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-15 00:03:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-15 00:03:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-15 00:03:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-15 00:03:36 LOG5 begin_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2008-Oct-15 00:03:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-15 00:03:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-15 00:03:36 LOG5 end_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2008-Oct-15 00:03:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-15 00:03:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-15 00:03:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-15 00:03:36 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2008-Oct-15 00:03:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-15 00:03:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-15 00:03:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-15 00:03:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-15 00:03:37 LOG5 begin_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2008-Oct-15 00:03:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-15 00:03:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-15 00:03:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-15 00:03:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-15 00:03:37 LOG5 end_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2008-Oct-15 00:03:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-15 00:03:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-15 00:03:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-15 00:03:37 LOG5 begin_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2008-Oct-15 00:03:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-15 00:03:37 INFO2 take_data: Starting WAPP scan: 828900001 2008-Oct-15 00:03:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-15 00:03:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-15 00:03:37 LOG5 begin_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Oct-15 00:03:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-15 00:03:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14618.00 2008-Oct-15 00:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-15 00:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-15 00:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-15 00:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-15 00:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-15 00:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-15 00:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-15 00:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-15 00:03:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-15 00:03:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-15 00:03:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-15 00:03:39 LOG5 end_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2008-Oct-15 00:03:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-15 00:03:39 LOG5 end_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2008-Oct-15 00:03:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-15 00:03:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-15 00:03:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-15 00:03:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-15 00:03:39 LOG5 begin_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Oct-15 00:03:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-15 00:03:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-15 00:03:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-15 00:03:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-15 00:03:40 LOG5 end_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Oct-15 00:03:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-15 00:03:40 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-15 00:03:40 LOG5 finish_task: Level: (2) ID = <10344> Status = 0 0 0 0 ok 2008-Oct-15 00:03:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-15 00:03:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-15 00:03:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-15 00:03:40 LOG5 end_task: Level: (2) ID = <10344> Status = 0 0 0 0 ok 2008-Oct-15 00:03:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 22 of 99 2008-Oct-15 00:03:40 LOG4 send_obs_status: To obs_status: <1> LOOP 22 2008-Oct-15 00:03:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-15 00:03:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-15 00:03:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-15 00:03:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-15 00:03:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-15 00:03:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-15 00:03:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-15 00:03:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-15 00:03:40 LOG5 begin_task: Level: (2) ID = <10353> Status = 0 0 0 0 ok 2008-Oct-15 00:03:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-15 00:03:40 INFO2 take_data: Starting WAPP scan: 828900002 2008-Oct-15 00:03:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-15 00:03:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-15 00:03:40 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Oct-15 00:03:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-15 00:03:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-15 00:03:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14621.00 2008-Oct-15 00:03:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20081015.a2010.0000.fits 2008-Oct-15 00:03:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081015.a2010.0000.fits} 2008-Oct-15 00:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-15 00:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 860.519217 MHz 2008-Oct-15 00:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1595.687008 MHz 2008-Oct-15 00:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2025.448987 MHz 2008-Oct-15 00:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2090.418984 MHz 2008-Oct-15 00:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 936.843014 MHz 2008-Oct-15 00:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2017.003988 MHz 2008-Oct-15 00:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2067.202985 MHz 2008-Oct-15 00:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2140.617982 MHz 2008-Oct-15 00:13:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-15 00:13:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-15 00:13:42 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Oct-15 00:13:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-15 00:13:42 LOG5 end_task: Level: (2) ID = <10353> Status = 0 0 0 0 ok 2008-Oct-15 00:13:42 LOG1 fixed_driftmap: New position: year = 2008.7912648934014 RA = 01:22:27.6 RA/Dec = 01:22:57.1 +08:48:34.9 2008-Oct-15 00:13:42 NOTE fixed_driftmap: Correcting ZA to 9:32:38.8 ... 2008-Oct-15 00:13:42 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.5441240186 -CF 2008-Oct-15 00:13:42 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-15 00:13:42 START begin_task: Starting task 'WAPP calibration' 2008-Oct-15 00:13:42 LOG5 begin_task: Level: (2) ID = <10355> Status = 0 0 0 0 ok 2008-Oct-15 00:13:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-15 00:13:42 START begin_task: Starting task 'selecting calibration type' 2008-Oct-15 00:13:42 LOG5 begin_task: Level: (3) ID = <10356> Status = 0 0 0 0 ok 2008-Oct-15 00:13:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-15 00:13:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-15 00:13:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-15 00:13:42 START begin_task: Starting task 'waiting on setcal' 2008-Oct-15 00:13:42 LOG5 begin_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2008-Oct-15 00:13:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.5441240186 -CF 2008-Oct-15 00:13:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-15 00:13:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-15 00:13:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-15 00:13:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-15 00:13:43 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-15 00:13:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-15 00:13:43 LOG5 end_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2008-Oct-15 00:13:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-15 00:13:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-15 00:13:43 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-15 00:13:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-15 00:13:43 LOG5 begin_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Oct-15 00:13:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-15 00:13:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-15 00:13:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-15 00:13:43 LOG5 end_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Oct-15 00:13:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-15 00:13:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-15 00:13:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-15 00:13:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-15 00:13:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-15 00:13:44 LOG5 begin_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2008-Oct-15 00:13:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-15 00:13:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-15 00:13:44 LOG5 end_ta