2008-Oct-13 20:22:07 BEGIN executive: CIMA executive starting ... 2008-Oct-13 20:22:07 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-13 20:22:07 INFO1 executive: Using CIMA version 3.0.04 'next' from 2008-09-30 18:33 2008-Oct-13 20:22:07 INFO4 executive: This is an ON-LINE session 2008-Oct-13 20:22:07 INFO4 executive: This is a REMOTE session 2008-Oct-13 20:22:07 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-13 20:22:07 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Kelley Hess, M. Jacquart' 2008-Oct-13 20:22:07 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081013' 2008-Oct-13 20:22:08 LOG2 log_preferences: Currently applied preferences: 2008-Oct-13 20:22:08 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-13 20:22:08 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-13 20:22:08 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-13 20:22:08 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-13 20:22:08 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-13 20:22:08 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-13 20:22:08 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-13 20:22:08 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-13 20:22:08 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-13 20:22:08 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-13 20:22:08 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-13 20:22:08 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-13 20:22:08 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-13 20:22:08 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-13 20:22:08 ALERT executive: CIMA executive ready 2008-Oct-13 20:22:11 NOTE frontend: CIMA frontend ready 2008-Oct-13 20:22:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:22:12 LOG4 got_cormsg: From DATATAKING: setup 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Oct-13 20:22:19 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-13 20:22:19 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-13 20:22:19 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-13 20:22:20 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-13 20:22:20 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-13 20:22:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:22:20 LOG4 got_cormsg: From DATATAKING: 2008-Oct-13 20:22:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:22:24 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-13 20:22:24 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-13 20:22:24 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-13 20:22:24 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-13 20:22:24 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-13 20:22:24 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-13 20:22:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-13 20:22:24 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-13 20:22:24 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-13 20:22:24 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-13 20:22:24 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-13 20:22:24 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-13 20:22:24 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-13 20:22:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:22:24 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-13 20:22:24 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-13 20:22:24 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-13 20:22:24 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-13 20:22:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:22:31 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-13 20:22:31 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-13 20:22:31 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-13 20:22:31 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-13 20:22:31 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-13 20:22:32 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-13 20:22:32 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-13 20:22:32 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-13 20:22:32 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-13 20:22:32 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-13 20:22:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:22:35 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-13 20:22:35 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-13 20:22:35 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-13 20:22:35 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-13 20:23:14 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-13 20:23:57 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-13 20:23:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-13 20:23:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-13 20:23:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-13 20:23:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-13 20:23:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-13 20:23:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-13 20:23:57 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-13 20:23:57 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-13 20:23:57 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-13 20:23:57 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-13 20:23:57 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-13 20:23:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-13 20:23:57 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-13 20:23:57 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-13 20:23:57 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-13 20:23:57 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-13 20:23:57 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-13 20:23:57 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-13 20:23:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-13 20:23:59 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-13 20:23:59 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-13 20:23:59 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-13 20:23:59 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-13 20:23:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-13 20:23:59 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-13 20:23:59 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-13 20:23:59 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Oct-13 20:23:59 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-13 20:23:59 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-13 20:23:59 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-13 20:23:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-13 20:23:59 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-13 20:23:59 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-13 20:23:59 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-13 20:23:59 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-13 20:23:59 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-13 20:23:59 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-13 20:23:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:23:59 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-13 20:23:59 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-13 20:24:00 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-13 20:24:00 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-13 20:24:00 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-13 20:24:00 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-13 20:24:00 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-13 20:24:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-13 20:24:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 20:24:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:24:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 20:24:00 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-13 20:24:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 20:24:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 20:24:00 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-13 20:24:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 20:24:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-13 20:24:00 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-13 20:24:00 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-13 20:24:00 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-13 20:24:00 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-13 20:24:00 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-13 20:24:00 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-13 20:24:00 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-13 20:24:00 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-13 20:24:00 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-13 20:24:00 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-13 20:24:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-13 20:24:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:24:00 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-13 20:24:00 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-13 20:24:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:24:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 20:24:15 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-13 20:24:15 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-13 20:24:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-13 20:24:15 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-13 20:24:15 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-13 20:24:15 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-13 20:24:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:24:16 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-13 20:24:16 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-13 20:24:16 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-13 20:24:16 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-13 20:24:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-13 20:24:16 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-13 20:24:16 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-13 20:24:16 START begin_task: Starting task 'selecting calibration port' 2008-Oct-13 20:24:16 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-13 20:24:16 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-13 20:24:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-13 20:24:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:24:16 START begin_task: Starting task 'waiting on calport' 2008-Oct-13 20:24:16 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-13 20:24:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:16 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-13 20:24:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:24:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 20:24:16 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-13 20:24:16 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-13 20:24:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-13 20:24:16 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-13 20:24:16 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-13 20:24:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 20:24:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 20:24:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:24:16 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-13 20:24:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:24:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 20:24:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:24:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:24:16 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-13 20:24:16 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-13 20:24:16 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-13 20:24:16 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-13 20:24:16 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-13 20:24:16 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-13 20:24:16 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-13 20:24:16 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-13 20:24:16 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-13 20:24:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:24:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:24:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:24:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:24:16 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-13 20:24:16 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-13 20:24:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:24:16 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-13 20:24:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:24:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 20:24:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:24:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:24:16 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-13 20:24:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:24:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:24:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:24:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:24:17 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-13 20:24:17 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-13 20:24:17 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-13 20:24:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:24:17 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-13 20:24:17 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-13 20:24:17 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-13 20:24:17 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-13 20:24:17 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-13 20:24:17 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-13 20:24:17 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-13 20:24:17 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-13 20:24:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-13 20:24:17 LOG3 track_source: Calling 'track_source galfasrc 212900.0 +090012 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-13 20:24:17 START begin_task: Starting task 'sending tracking commands' 2008-Oct-13 20:24:17 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-13 20:24:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-13 20:24:17 INFO1 track_source: Starting to track galfasrc 2008-Oct-13 20:24:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-13 20:24:17 LOG3 vw_send: To DATATAKING: set ra 212900.0 2008-Oct-13 20:24:17 LOG3 vw_send: To DATATAKING: set dec +090012 2008-Oct-13 20:24:17 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-13 20:24:17 LOG3 vw_send: To DATATAKING: pnt tr 212900.0 +090012 -CJ 2008-Oct-13 20:24:17 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-13 20:24:17 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-13 20:24:17 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-13 20:24:17 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-13 20:24:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:24:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-13 20:24:17 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-13 20:24:17 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-13 20:24:17 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-13 20:24:17 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-13 20:24:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:24:17 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-13 20:24:17 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-13 20:24:17 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-13 20:24:17 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-13 20:24:17 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-13 20:24:17 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-13 20:24:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-13 20:24:17 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-13 20:24:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-13 20:24:18 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-13 20:24:18 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-13 20:24:18 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-13 20:24:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 20:24:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0006.fits 2008-Oct-13 20:24:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-13 20:24:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-13 20:24:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-13 20:24:18 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081013.a2010.0006.fits} 2008-Oct-13 20:24:18 LOG4 got_cormsg: From DATATAKING: set ra 212900.0 2008-Oct-13 20:24:18 LOG4 got_cormsg: From DATATAKING: set dec +090012 2008-Oct-13 20:24:18 LOG4 got_cormsg: From DATATAKING: vw% 212900.0 2008-Oct-13 20:24:18 LOG4 got_cormsg: From DATATAKING: vw% +090012 2008-Oct-13 20:24:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-13 20:24:18 LOG4 got_cormsg: From DATATAKING: pnt tr 212900.0 +090012 -CJ 2008-Oct-13 20:24:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-13 20:24:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-13 20:24:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:24:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 20:25:13 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-13 20:25:13 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-13 20:25:13 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-13 20:25:13 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-13 20:25:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-13 20:25:13 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-13 20:25:13 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-13 20:25:13 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-13 20:25:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:25:13 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-13 20:25:13 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-13 20:25:13 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-13 20:25:13 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-13 20:25:13 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-13 20:25:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-13 20:25:13 LOG3 waittrk: Start waittrk 5 2008-Oct-13 20:25:13 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-13 20:25:13 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-13 20:25:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-13 20:25:18 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-13 20:25:18 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-13 20:25:18 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-13 20:25:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-13 20:25:19 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-13 20:25:19 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-13 20:25:19 INFO2 waittrk: Now tracking galfasrc 2008-Oct-13 20:25:19 LOG4 waittrk: Current telescope position: Az = 360.48 ZA = 9.27 2008-Oct-13 20:25:19 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-13 20:25:19 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-13 20:25:19 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-13 20:25:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:25:19 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-13 20:25:19 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-13 20:25:19 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-13 20:25:19 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-13 20:25:19 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-13 20:25:19 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-13 20:25:19 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-13 20:25:19 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-13 20:25:19 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-13 20:25:19 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-13 20:25:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-13 20:25:19 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 20:25:19 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-13 20:25:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 20:25:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 20:25:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:25:20 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 20:25:20 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-13 20:25:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 20:25:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:25:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:25:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 20:25:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 20:25:20 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-13 20:25:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 20:25:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 20:25:20 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 20:25:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 20:25:20 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-13 20:25:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:25:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 20:25:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 20:25:21 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-13 20:25:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 20:25:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 20:25:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 20:25:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:25:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 20:25:21 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-13 20:25:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 20:25:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 20:25:21 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-13 20:25:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 20:25:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:25:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 20:25:21 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-13 20:25:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:25:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:25:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:25:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:25:21 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081013.a2010.0006.fits' is empty! 2008-Oct-13 20:25:21 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-13 20:25:21 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-13 20:25:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 20:25:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 20:25:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 20:25:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:25:21 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-13 20:25:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:25:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 20:25:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:25:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:25:21 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-13 20:25:21 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-13 20:25:21 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-13 20:25:21 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-13 20:25:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-13 20:25:21 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-13 20:25:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-13 20:25:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-13 20:25:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:25:21 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-13 20:25:21 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-13 20:25:21 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-13 20:25:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:25:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 20:25:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:25:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 20:25:24 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-13 20:25:24 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-13 20:25:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-13 20:25:24 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-13 20:25:24 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-13 20:25:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-13 20:25:24 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:25:24 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:25:24 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:25:24 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:25:24 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-13 20:25:24 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-13 20:25:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-13 20:25:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:25:25 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-13 20:25:25 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 5 dB 2008-Oct-13 20:25:25 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2008-Oct-13 20:25:25 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 3 dB 2008-Oct-13 20:25:25 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-13 20:25:25 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-13 20:25:25 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-13 20:25:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.121 1.050 ALFA beam 1: 0.986 0.990 2008-Oct-13 20:25:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.109 1.079 ALFA beam 3: 0.937 0.911 2008-Oct-13 20:25:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.914 0.886 ALFA beam 5: 1.005 0.934 2008-Oct-13 20:25:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.036 1.017 ALFA beam 7: 0.911 0.905 2008-Oct-13 20:25:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-13 20:25:25 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-13 20:25:25 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-13 20:25:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:25:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-13 20:25:25 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-13 20:25:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 20:25:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-13 20:25:25 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-13 20:25:25 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-13 20:25:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:25:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-13 20:25:25 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-13 20:25:25 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-13 20:25:25 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-13 20:25:25 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-13 20:25:25 LOG5 antvel: Calling 'antvel 212900.000000 90012.000000 J 0' 2008-Oct-13 20:25:25 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +09:00:12.0 Epoch = 2008.78809 J 2008-Oct-13 20:25:25 LOG2 antvel: Computed apparent RA = 21:29:27.0 Dec = +09:02:40.5 2008-Oct-13 20:25:25 LOG2 antvel: Parameters to Doppler: Topocentric 87925 2008 287 0.0 2008-Oct-13 20:25:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:25:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-13 20:25:25 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-13 20:25:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:25:25 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:25:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-13 20:25:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:25:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:25:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:25:25 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-13 20:25:25 LOG5 log_alfabeam: Parameters: 21.483333333333334 9.0033333333333339 21.501782 2008.7880930425633 18.999933 2008-Oct-13 20:25:25 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333416 9.003333333333334 2008-Oct-13 20:25:25 LOG4 log_alfabeam: ALFABEAM 1 21.482295025714190 9.108347894659103 2008-Oct-13 20:25:25 LOG4 log_alfabeam: ALFABEAM 2 21.477563964419669 9.039975289547154 2008-Oct-13 20:25:25 LOG4 log_alfabeam: ALFABEAM 3 21.478560155436089 8.934850124850417 2008-Oct-13 20:25:25 LOG4 log_alfabeam: ALFABEAM 4 21.484397303261851 8.898343545078347 2008-Oct-13 20:25:25 LOG4 log_alfabeam: ALFABEAM 5 21.489145610848404 8.967454456431971 2008-Oct-13 20:25:25 LOG4 log_alfabeam: ALFABEAM 6 21.488039574399231 9.072327602896726 2008-Oct-13 20:25:25 INFO2 take_data: Starting WAPP+GALFA scan: 828700339 2008-Oct-13 20:25:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:25:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:25:26 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-13 20:25:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:25:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-13 20:25:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:25:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:25:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:25:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1527.00 2008-Oct-13 20:25:26 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Oct-13 20:25:26 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Oct-13 20:25:26 WARNING abort_task: WARNING abort requested! 2008-Oct-13 20:25:26 WARNING abort_task: WARNING Aborting waiting on WAPP+GALFA spectra 2008-Oct-13 20:25:27 WARNING abort_task: WARNING Aborting wait for waiting on WAPP+GALFA spectra 2008-Oct-13 20:25:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'ABORT' 2008-Oct-13 20:25:27 LOG5 end_task: Level: (4) ID = <10032> Status = 1 0 0 0 abort 2008-Oct-13 20:25:27 START begin_task: Starting task 'stopping the WAPPs' 2008-Oct-13 20:25:27 LOG5 begin_task: Level: (4) ID = <10033> Status = 1 0 0 0 abort 2008-Oct-13 20:25:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Oct-13 20:25:27 INFO1 stop_wapp: Stopping the WAPPs 2008-Oct-13 20:25:27 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Oct-13 20:25:27 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Oct-13 20:25:27 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Oct-13 20:25:27 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Oct-13 20:25:27 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Oct-13 20:25:27 LOG5 begin_task: Level: (5) ID = <10034> Status = 1 0 0 0 abort 2008-Oct-13 20:25:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Oct-13 20:25:28 NOTE WAPP=2+3+4-wappcon: WAPP successfully aborted! 2008-Oct-13 20:25:28 LOG3 WAPP=2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:25:28 LOG3 WAPP=2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:25:28 LOG3 WAPP=2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:25:28 LOG3 WAPP=2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:25:28 LOG3 WAPP=2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:25:28 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:25:28 LOG3 WAPP=2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:25:28 LOG3 WAPP=2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:25:29 LOG3 WAPP=2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:25:29 LOG4 WAPP=2+3+4-start_spectra: Abort request received 2008-Oct-13 20:25:29 INFO1 WAPP=2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:25:29 NOTE WAPP=1-wappcon: WAPP successfully aborted! 2008-Oct-13 20:25:29 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-Oct-13 20:25:29 LOG5 end_task: Level: (5) ID = <10034> Status = 1 0 0 0 abort 2008-Oct-13 20:25:29 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-Oct-13 20:25:29 LOG5 end_task: Level: (4) ID = <10033> Status = 1 0 0 0 abort 2008-Oct-13 20:25:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'ABORT' 2008-Oct-13 20:25:29 LOG5 end_task: Level: (3) ID = <10031> Status = 1 0 0 0 abort 2008-Oct-13 20:25:29 INFO2 smartfreq: Switching off CAL 2008-Oct-13 20:25:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 20:25:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 20:25:29 INFO3 restore_frequencies: Restoring original frequencies 2008-Oct-13 20:25:29 LOG5 antvel: Calling 'antvel 212900.000000 90012.000000 J 0' 2008-Oct-13 20:25:29 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +09:00:12.0 Epoch = 2008.78809 J 2008-Oct-13 20:25:29 LOG2 antvel: Computed apparent RA = 21:29:27.0 Dec = +09:02:40.5 2008-Oct-13 20:25:29 LOG2 antvel: Parameters to Doppler: Topocentric 87929 2008 287 0.0 2008-Oct-13 20:25:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:25:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-13 20:25:29 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-13 20:25:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:25:29 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:25:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-13 20:25:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:25:29 STOP finish_task: Finishing task 'smart frequency switching' 2008-Oct-13 20:25:29 LOG5 finish_task: Level: (2) ID = <10021> Status = 1 0 0 0 abort 2008-Oct-13 20:25:29 WARNING finish_task: WARNING aborted pattern: smart frequency switching 2008-Oct-13 20:25:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Oct-13 20:25:30 END end_task: Finishing task 'smart frequency switching' with status 'ABORT' 2008-Oct-13 20:25:30 LOG5 end_task: Level: (2) ID = <10021> Status = 1 0 0 0 abort 2008-Oct-13 20:25:30 ALERT run_command_file: Stopping command file processing at line 12! 2008-Oct-13 20:25:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Oct-13 20:25:30 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Oct-13 20:25:30 LOG5 finish_task: Level: (1) ID = <10003> Status = 1 0 0 0 abort 2008-Oct-13 20:25:30 WARNING finish_task: WARNING aborted running: command file 'command_galfasrc' 2008-Oct-13 20:25:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Oct-13 20:25:30 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'ABORT' 2008-Oct-13 20:25:30 LOG5 end_task: Level: (1) ID = <10003> Status = 1 0 0 0 abort 2008-Oct-13 20:25:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:25:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-13 20:25:30 LOG3 WAPP=1-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:25:30 LOG3 WAPP=1-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:25:30 LOG3 WAPP=1-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:25:30 LOG3 WAPP=1-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:25:30 LOG3 WAPP=1-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:25:30 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:25:30 LOG3 WAPP=1-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:25:30 LOG3 WAPP=1-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:25:30 LOG3 WAPP=1-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:25:30 LOG4 WAPP=1-start_spectra: Abort request received 2008-Oct-13 20:25:30 INFO1 WAPP=1-start_spectra: DONE with spectral line observation 2008-Oct-13 20:25:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 20:25:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:25:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:25:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:25:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:26:35 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-13 20:26:49 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-13 20:26:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-13 20:26:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-13 20:26:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-13 20:26:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-13 20:26:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-13 20:26:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-13 20:26:49 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-13 20:26:49 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-13 20:26:49 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-13 20:26:49 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-13 20:26:49 LOG5 begin_task: Level: (1) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-13 20:26:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-13 20:26:49 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-13 20:26:49 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-13 20:26:49 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-13 20:26:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-13 20:26:49 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-13 20:26:49 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-13 20:26:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-13 20:26:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-13 20:26:51 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-13 20:26:51 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-13 20:26:51 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-13 20:26:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-13 20:26:51 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-13 20:26:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 20:26:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:26:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 20:26:51 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-13 20:26:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 20:26:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 20:26:52 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-13 20:26:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 20:26:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:26:52 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-13 20:26:52 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-13 20:26:52 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-13 20:26:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-13 20:26:52 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-13 20:26:52 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-13 20:26:52 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-13 20:26:52 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-13 20:26:52 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-13 20:26:52 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-13 20:26:52 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-13 20:26:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-13 20:26:52 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-13 20:26:52 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-13 20:26:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-13 20:26:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:26:52 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-13 20:26:52 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-13 20:26:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-13 20:26:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-13 20:26:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:26:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:26:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:26:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:26:53 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-13 20:26:53 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-13 20:26:53 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-13 20:26:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-13 20:26:53 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-13 20:26:53 LOG5 finish_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-13 20:26:53 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-13 20:26:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:26:53 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-13 20:26:53 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-13 20:26:53 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-13 20:26:53 LOG5 begin_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-13 20:26:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-13 20:26:53 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-13 20:26:53 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-13 20:26:53 START begin_task: Starting task 'selecting calibration port' 2008-Oct-13 20:26:53 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-13 20:26:53 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-13 20:26:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-13 20:26:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:26:53 START begin_task: Starting task 'waiting on calport' 2008-Oct-13 20:26:53 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-13 20:26:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:26:53 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-13 20:26:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:26:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:26:53 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 20:26:53 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-13 20:26:53 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-13 20:26:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-13 20:26:53 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-13 20:26:53 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-13 20:26:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 20:26:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 20:26:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:26:53 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-13 20:26:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:26:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:26:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 20:26:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:26:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:26:53 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-13 20:26:53 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-13 20:26:53 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-13 20:26:53 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-13 20:26:53 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-13 20:26:54 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-13 20:26:54 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-13 20:26:54 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-13 20:26:54 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-13 20:26:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:26:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:26:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:26:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:26:54 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-13 20:26:54 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-13 20:26:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:26:54 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-13 20:26:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-13 20:26:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:26:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-13 20:26:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 20:26:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 20:26:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:26:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:26:54 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-13 20:26:54 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-13 20:26:54 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-13 20:26:54 LOG5 finish_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-13 20:26:54 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-13 20:26:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:26:54 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-13 20:26:54 LOG5 end_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-13 20:26:54 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-13 20:26:54 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-13 20:26:54 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-13 20:26:54 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-13 20:26:54 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-13 20:26:54 LOG5 begin_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-13 20:26:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-13 20:26:54 LOG3 track_source: Calling 'track_source galfasrc 213300.0 +090012 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-13 20:26:54 START begin_task: Starting task 'sending tracking commands' 2008-Oct-13 20:26:54 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-13 20:26:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-13 20:26:54 INFO1 track_source: Starting to track galfasrc 2008-Oct-13 20:26:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-13 20:26:54 LOG3 vw_send: To DATATAKING: set ra 213300.0 2008-Oct-13 20:26:54 LOG3 vw_send: To DATATAKING: set dec +090012 2008-Oct-13 20:26:54 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-13 20:26:54 LOG3 vw_send: To DATATAKING: pnt tr 213300.0 +090012 -CJ 2008-Oct-13 20:26:54 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-13 20:26:54 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-13 20:26:54 LOG5 finish_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-13 20:26:54 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-13 20:26:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:26:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-13 20:26:54 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-13 20:26:54 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-13 20:26:54 LOG5 finish_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-13 20:26:54 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-13 20:26:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:26:54 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-13 20:26:54 LOG5 end_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-13 20:26:54 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-13 20:26:55 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-13 20:26:55 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-13 20:26:55 LOG5 begin_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-13 20:26:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-13 20:26:55 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-13 20:26:55 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-13 20:26:55 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-13 20:26:55 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-13 20:26:55 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-13 20:26:55 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-13 20:26:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-13 20:26:55 LOG4 got_cormsg: From DATATAKING: set ra 213300.0 2008-Oct-13 20:26:55 LOG4 got_cormsg: From DATATAKING: set dec +090012 2008-Oct-13 20:26:55 LOG4 got_cormsg: From DATATAKING: vw% 213300.0 2008-Oct-13 20:26:55 LOG4 got_cormsg: From DATATAKING: vw% +090012 2008-Oct-13 20:26:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:26:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-13 20:26:55 LOG4 got_cormsg: From DATATAKING: pnt tr 213300.0 +090012 -CJ 2008-Oct-13 20:26:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-13 20:26:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-13 20:26:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:26:55 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-13 20:26:55 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-13 20:26:55 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-13 20:26:55 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-13 20:26:55 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-13 20:26:55 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-13 20:26:55 LOG5 finish_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-13 20:26:55 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-13 20:26:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:26:56 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-13 20:26:56 LOG5 end_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-13 20:26:56 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-13 20:26:56 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-13 20:26:56 LOG5 begin_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-13 20:26:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-13 20:26:56 LOG3 waittrk: Start waittrk 5 2008-Oct-13 20:26:56 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-13 20:26:56 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-13 20:27:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-13 20:27:01 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-13 20:27:01 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-13 20:27:01 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-13 20:27:23 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-13 20:27:23 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-13 20:27:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-13 20:27:23 INFO2 waittrk: Now tracking galfasrc 2008-Oct-13 20:27:23 LOG4 waittrk: Current telescope position: Az = 357.56 ZA = 9.28 2008-Oct-13 20:27:23 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-13 20:27:23 LOG5 finish_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-13 20:27:23 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-13 20:27:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:27:23 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-13 20:27:23 LOG5 end_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-13 20:27:23 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-13 20:27:23 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-13 20:27:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-13 20:27:23 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-13 20:27:23 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-13 20:27:23 LOG5 begin_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-13 20:27:23 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-13 20:27:23 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-13 20:27:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-13 20:27:24 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 20:27:24 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-13 20:27:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 20:27:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 20:27:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:27:24 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 20:27:24 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-13 20:27:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 20:27:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:27:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:27:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 20:27:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 20:27:24 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-13 20:27:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 20:27:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 20:27:24 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 20:27:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 20:27:24 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-13 20:27:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:27:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 20:27:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 20:27:25 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-13 20:27:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 20:27:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 20:27:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 20:27:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:27:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 20:27:25 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-13 20:27:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 20:27:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 20:27:25 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-13 20:27:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 20:27:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:27:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 20:27:25 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-13 20:27:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:27:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:27:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:27:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:27:25 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-13 20:27:25 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-13 20:27:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 20:27:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 20:27:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 20:27:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:27:25 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-13 20:27:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 20:27:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:27:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 20:27:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:27:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:27:25 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-13 20:27:25 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-13 20:27:25 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-13 20:27:25 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-13 20:27:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-13 20:27:25 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-13 20:27:25 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-13 20:27:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-13 20:27:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:27:25 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-13 20:27:25 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-13 20:27:25 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-13 20:27:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:27:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0007.fits 2008-Oct-13 20:27:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0007.fits} 2008-Oct-13 20:27:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:27:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 20:27:28 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-13 20:27:28 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-13 20:27:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-13 20:27:28 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-13 20:27:28 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-13 20:27:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-13 20:27:28 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:27:28 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:27:28 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:27:28 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:27:28 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-13 20:27:28 LOG5 begin_task: Level: (5) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-13 20:27:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-13 20:27:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:27:29 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 6 6 dB 2008-Oct-13 20:27:29 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 5 dB 2008-Oct-13 20:27:29 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2008-Oct-13 20:27:29 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 3 dB 2008-Oct-13 20:27:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-13 20:27:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-13 20:27:29 LOG5 end_task: Level: (5) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-13 20:27:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.869 1.043 ALFA beam 1: 0.982 0.986 2008-Oct-13 20:27:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.106 1.099 ALFA beam 3: 0.953 0.930 2008-Oct-13 20:27:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.928 0.909 ALFA beam 5: 1.009 0.934 2008-Oct-13 20:27:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.056 1.043 ALFA beam 7: 0.923 0.928 2008-Oct-13 20:27:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-13 20:27:29 LOG5 finish_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-13 20:27:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-13 20:27:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:27:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-13 20:27:29 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-13 20:27:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 20:27:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-13 20:27:29 LOG5 finish_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-13 20:27:29 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-13 20:27:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:27:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-13 20:27:29 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-13 20:27:29 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-13 20:27:29 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-13 20:27:29 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-13 20:27:29 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:27:29 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:27:29 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:27:29 LOG2 antvel: Parameters to Doppler: Topocentric 88049 2008 287 0.0 2008-Oct-13 20:27:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:27:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-13 20:27:29 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-13 20:27:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:27:29 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:27:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-13 20:27:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:27:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:27:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:27:29 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-13 20:27:29 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.536320 2008.7880969718863 18.999933 2008-Oct-13 20:27:29 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000107 9.003333333333337 2008-Oct-13 20:27:29 LOG4 log_alfabeam: ALFABEAM 1 21.548613182683553 9.107461158316578 2008-Oct-13 20:27:29 LOG4 log_alfabeam: ALFABEAM 2 21.544115664126466 9.035714062376103 2008-Oct-13 20:27:29 LOG4 log_alfabeam: ALFABEAM 3 21.545460651849904 8.931444980729728 2008-Oct-13 20:27:29 LOG4 log_alfabeam: ALFABEAM 4 21.551412158983684 8.899248918881664 2008-Oct-13 20:27:29 LOG4 log_alfabeam: ALFABEAM 5 21.555924685482942 8.971745863948824 2008-Oct-13 20:27:29 LOG4 log_alfabeam: ALFABEAM 6 21.554470765983826 9.075683032591968 2008-Oct-13 20:27:29 INFO2 take_data: Starting WAPP+GALFA scan: 828700340 2008-Oct-13 20:27:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:27:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:27:30 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-13 20:27:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:27:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-13 20:27:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:27:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:27:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:27:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1651.00 2008-Oct-13 20:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:27:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:27:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:27:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:27:41 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-13 20:27:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:27:41 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-13 20:27:41 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-13 20:27:41 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-13 20:27:41 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-13 20:27:41 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:27:41 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:27:41 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:27:41 LOG2 antvel: Parameters to Doppler: Topocentric 88061 2008 287 0.0 2008-Oct-13 20:27:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:27:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-13 20:27:41 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-13 20:27:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:27:41 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:27:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-13 20:27:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:27:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:27:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:27:41 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-13 20:27:41 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.539663 2008.7880973521433 18.999933 2008-Oct-13 20:27:41 LOG4 log_alfabeam: ALFABEAM 0 21.549999999999770 9.003333333333337 2008-Oct-13 20:27:41 LOG4 log_alfabeam: ALFABEAM 1 21.548649264262284 9.107565177808018 2008-Oct-13 20:27:41 LOG4 log_alfabeam: ALFABEAM 2 21.544126953076990 9.036160860131380 2008-Oct-13 20:27:41 LOG4 log_alfabeam: ALFABEAM 3 21.545435819626913 8.931790916921567 2008-Oct-13 20:27:41 LOG4 log_alfabeam: ALFABEAM 4 21.551376116648008 8.899142979092320 2008-Oct-13 20:27:41 LOG4 log_alfabeam: ALFABEAM 5 21.555913671965026 8.971296119161979 2008-Oct-13 20:27:41 LOG4 log_alfabeam: ALFABEAM 6 21.554495753257886 9.075342378193403 2008-Oct-13 20:27:41 INFO2 take_data: Starting WAPP+GALFA scan: 828700341 2008-Oct-13 20:27:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:27:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:27:42 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-13 20:27:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:27:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-13 20:27:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:27:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:27:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:27:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1663.00 2008-Oct-13 20:27:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:27:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:27:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:27:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:27:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:27:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:27:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:27:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:27:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:27:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:27:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:27:53 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-13 20:27:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:27:53 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-13 20:27:53 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-13 20:27:53 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-13 20:27:53 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-13 20:27:53 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:27:53 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:27:53 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:27:53 LOG2 antvel: Parameters to Doppler: Topocentric 88073 2008 287 0.0 2008-Oct-13 20:27:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:27:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-13 20:27:53 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-13 20:27:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:27:53 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:27:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-13 20:27:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:27:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:27:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:27:53 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-13 20:27:53 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.543005 2008.7880977324003 18.999933 2008-Oct-13 20:27:53 LOG4 log_alfabeam: ALFABEAM 0 21.549999999999866 9.003333333333343 2008-Oct-13 20:27:53 LOG4 log_alfabeam: ALFABEAM 1 21.548685380766820 9.107666452544201 2008-Oct-13 20:27:53 LOG4 log_alfabeam: ALFABEAM 2 21.544138395956949 9.036606779278104 2008-Oct-13 20:27:53 LOG4 log_alfabeam: ALFABEAM 3 21.545411108605180 8.932138726481682 2008-Oct-13 20:27:53 LOG4 log_alfabeam: ALFABEAM 4 21.551340038059283 8.899039779669511 2008-Oct-13 20:27:53 LOG4 log_alfabeam: ALFABEAM 5 21.555902502456540 8.970847209183095 2008-Oct-13 20:27:53 LOG4 log_alfabeam: ALFABEAM 6 21.554520622985304 9.074999825950027 2008-Oct-13 20:27:53 INFO2 take_data: Starting WAPP+GALFA scan: 828700342 2008-Oct-13 20:27:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:27:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:27:54 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-13 20:27:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:27:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-13 20:27:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:27:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:27:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:27:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1675.00 2008-Oct-13 20:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:28:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:28:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:28:05 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-13 20:28:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:28:05 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-13 20:28:05 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-13 20:28:05 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-13 20:28:05 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-13 20:28:05 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:28:05 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:28:05 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:28:05 LOG2 antvel: Parameters to Doppler: Topocentric 88085 2008 287 0.0 2008-Oct-13 20:28:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:28:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-13 20:28:05 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-13 20:28:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:28:05 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:28:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-13 20:28:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:28:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:28:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:28:05 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-13 20:28:05 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.546348 2008.7880981126575 18.999933 2008-Oct-13 20:28:05 LOG4 log_alfabeam: ALFABEAM 0 21.549999999999965 9.003333333333336 2008-Oct-13 20:28:05 LOG4 log_alfabeam: ALFABEAM 1 21.548721550883872 9.107765032760719 2008-Oct-13 20:28:05 LOG4 log_alfabeam: ALFABEAM 2 21.544149998788424 9.037052049646370 2008-Oct-13 20:28:05 LOG4 log_alfabeam: ALFABEAM 3 21.545386506104734 8.932488590381196 2008-Oct-13 20:28:05 LOG4 log_alfabeam: ALFABEAM 4 21.551303904545598 8.898939269540396 2008-Oct-13 20:28:05 LOG4 log_alfabeam: ALFABEAM 5 21.555891171050867 8.970398902852477 2008-Oct-13 20:28:05 LOG4 log_alfabeam: ALFABEAM 6 21.554545387915422 9.074655197149688 2008-Oct-13 20:28:05 INFO2 take_data: Starting WAPP+GALFA scan: 828700343 2008-Oct-13 20:28:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:28:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:28:06 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-13 20:28:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:28:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-13 20:28:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:28:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:28:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:28:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1687.00 2008-Oct-13 20:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:28:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:28:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:28:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:28:17 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-13 20:28:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:28:17 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-13 20:28:17 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-13 20:28:17 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-13 20:28:17 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-13 20:28:17 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:28:17 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:28:17 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:28:17 LOG2 antvel: Parameters to Doppler: Topocentric 88097 2008 287 0.0 2008-Oct-13 20:28:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:28:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-13 20:28:17 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-13 20:28:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:28:17 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:28:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-13 20:28:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:28:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:28:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:28:17 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-13 20:28:17 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.549690 2008.7880984929145 18.999933 2008-Oct-13 20:28:17 LOG4 log_alfabeam: ALFABEAM 0 21.549999999999802 9.003333333333334 2008-Oct-13 20:28:17 LOG4 log_alfabeam: ALFABEAM 1 21.548757750035641 9.107860849782943 2008-Oct-13 20:28:17 LOG4 log_alfabeam: ALFABEAM 2 21.544161753766229 9.037496368004375 2008-Oct-13 20:28:17 LOG4 log_alfabeam: ALFABEAM 3 21.545362028926792 8.932840271643869 2008-Oct-13 20:28:17 LOG4 log_alfabeam: ALFABEAM 4 21.551267740656389 8.898841518850444 2008-Oct-13 20:28:17 LOG4 log_alfabeam: ALFABEAM 5 21.555879685345541 8.969951505693381 2008-Oct-13 20:28:17 LOG4 log_alfabeam: ALFABEAM 6 21.554570031127099 9.074308724756836 2008-Oct-13 20:28:17 INFO2 take_data: Starting WAPP+GALFA scan: 828700344 2008-Oct-13 20:28:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:28:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:28:18 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-13 20:28:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:28:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-13 20:28:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:28:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:28:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:28:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1699.00 2008-Oct-13 20:28:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:28:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:28:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:28:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:28:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:28:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:28:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:28:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:28:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:28:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:28:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:28:29 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-13 20:28:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:28:29 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-13 20:28:29 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-13 20:28:29 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-13 20:28:29 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-13 20:28:29 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:28:29 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:28:29 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:28:29 LOG2 antvel: Parameters to Doppler: Topocentric 88109 2008 287 0.0 2008-Oct-13 20:28:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:28:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-13 20:28:29 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-13 20:28:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:28:29 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:28:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-13 20:28:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:28:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:28:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:28:29 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-13 20:28:29 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.553033 2008.7880988731715 18.999933 2008-Oct-13 20:28:29 LOG4 log_alfabeam: ALFABEAM 0 21.549999999999329 9.003333333333341 2008-Oct-13 20:28:29 LOG4 log_alfabeam: ALFABEAM 1 21.548793996934684 9.107953951925440 2008-Oct-13 20:28:29 LOG4 log_alfabeam: ALFABEAM 2 21.544173667022250 9.037939963581202 2008-Oct-13 20:28:29 LOG4 log_alfabeam: ALFABEAM 3 21.545337664481199 8.933193952563846 2008-Oct-13 20:28:29 LOG4 log_alfabeam: ALFABEAM 4 21.551231527693197 8.898746478445807 2008-Oct-13 20:28:29 LOG4 log_alfabeam: ALFABEAM 5 21.555868039324523 8.969504787123995 2008-Oct-13 20:28:29 LOG4 log_alfabeam: ALFABEAM 6 21.554594565288141 9.073960228721596 2008-Oct-13 20:28:29 INFO2 take_data: Starting WAPP+GALFA scan: 828700345 2008-Oct-13 20:28:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:28:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:28:30 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-13 20:28:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:28:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-13 20:28:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:28:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:28:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:28:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1711.00 2008-Oct-13 20:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:28:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:28:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:28:41 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-13 20:28:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:28:41 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-13 20:28:41 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-13 20:28:41 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-13 20:28:41 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-13 20:28:41 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:28:41 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:28:41 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:28:41 LOG2 antvel: Parameters to Doppler: Topocentric 88121 2008 287 0.0 2008-Oct-13 20:28:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:28:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-13 20:28:41 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-13 20:28:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:28:41 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:28:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-13 20:28:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:28:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:28:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:28:41 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-13 20:28:41 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.556375 2008.7880992534285 18.999933 2008-Oct-13 20:28:41 LOG4 log_alfabeam: ALFABEAM 0 21.549999999998072 9.003333333333350 2008-Oct-13 20:28:41 LOG4 log_alfabeam: ALFABEAM 1 21.548830266935635 9.108044275144525 2008-Oct-13 20:28:41 LOG4 log_alfabeam: ALFABEAM 2 21.544185730482219 9.038382534534632 2008-Oct-13 20:28:41 LOG4 log_alfabeam: ALFABEAM 3 21.545313429351971 8.933549392910397 2008-Oct-13 20:28:41 LOG4 log_alfabeam: ALFABEAM 4 21.551195290273181 8.898654213849223 2008-Oct-13 20:28:41 LOG4 log_alfabeam: ALFABEAM 5 21.555856240851003 8.969059051359173 2008-Oct-13 20:28:41 LOG4 log_alfabeam: ALFABEAM 6 21.554618973667754 9.073609945308510 2008-Oct-13 20:28:41 INFO2 take_data: Starting WAPP+GALFA scan: 828700346 2008-Oct-13 20:28:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:28:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:28:42 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-13 20:28:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:28:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-13 20:28:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:28:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:28:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:28:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1723.00 2008-Oct-13 20:28:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:28:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:28:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:28:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:28:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:28:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:28:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:28:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:28:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:28:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:28:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:28:53 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-13 20:28:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:28:53 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-13 20:28:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-13 20:28:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 20:28:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 20:28:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:28:53 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-13 20:28:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:28:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 20:28:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:28:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:28:53 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-13 20:28:53 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-13 20:28:53 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-13 20:28:53 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-13 20:28:53 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:28:53 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:28:53 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:28:53 LOG2 antvel: Parameters to Doppler: Topocentric 88133 2008 287 0.0 2008-Oct-13 20:28:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:28:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-13 20:28:53 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-13 20:28:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:28:53 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:28:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-13 20:28:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:28:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:28:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:28:53 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-13 20:28:53 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.559718 2008.7880996336855 18.999933 2008-Oct-13 20:28:53 LOG4 log_alfabeam: ALFABEAM 0 21.550000000001152 9.003333333333327 2008-Oct-13 20:28:53 LOG4 log_alfabeam: ALFABEAM 1 21.548866578777236 9.108131865828787 2008-Oct-13 20:28:53 LOG4 log_alfabeam: ALFABEAM 2 21.544197950394494 9.038824309464410 2008-Oct-13 20:28:53 LOG4 log_alfabeam: ALFABEAM 3 21.545289311051096 8.933906776277393 2008-Oct-13 20:28:53 LOG4 log_alfabeam: ALFABEAM 4 21.551159009684994 8.898564677830928 2008-Oct-13 20:28:53 LOG4 log_alfabeam: ALFABEAM 5 21.555844283807016 8.968614068423534 2008-Oct-13 20:28:53 LOG4 log_alfabeam: ALFABEAM 6 21.554643268858328 9.073257693153140 2008-Oct-13 20:28:53 INFO2 take_data: Starting WAPP+GALFA scan: 828700347 2008-Oct-13 20:28:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:28:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:28:54 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-13 20:28:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:28:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-13 20:28:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:28:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:28:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:28:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1735.00 2008-Oct-13 20:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:29:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:29:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:29:05 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-13 20:29:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:29:05 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-13 20:29:05 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-13 20:29:05 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-13 20:29:05 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-13 20:29:05 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:29:05 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:29:05 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:29:05 LOG2 antvel: Parameters to Doppler: Topocentric 88145 2008 287 0.0 2008-Oct-13 20:29:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:29:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-13 20:29:05 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-13 20:29:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:29:05 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:29:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-13 20:29:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:29:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:29:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:29:05 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-13 20:29:05 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.563060 2008.7881000139428 18.999933 2008-Oct-13 20:29:05 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000342 9.003333333333337 2008-Oct-13 20:29:05 LOG4 log_alfabeam: ALFABEAM 1 21.548902907753607 9.108216664600370 2008-Oct-13 20:29:05 LOG4 log_alfabeam: ALFABEAM 2 21.544210318421928 9.039264988065701 2008-Oct-13 20:29:05 LOG4 log_alfabeam: ALFABEAM 3 21.545265325957011 8.934265859294612 2008-Oct-13 20:29:05 LOG4 log_alfabeam: ALFABEAM 4 21.551122710590793 8.898477931254513 2008-Oct-13 20:29:05 LOG4 log_alfabeam: ALFABEAM 5 21.555832176355270 8.968170141073045 2008-Oct-13 20:29:05 LOG4 log_alfabeam: ALFABEAM 6 21.554667434323896 9.072903711708868 2008-Oct-13 20:29:05 INFO2 take_data: Starting WAPP+GALFA scan: 828700348 2008-Oct-13 20:29:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:29:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:29:06 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-13 20:29:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:29:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-13 20:29:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:29:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:29:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:29:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1747.00 2008-Oct-13 20:29:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:29:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:29:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:29:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:29:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:29:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:29:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:29:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:29:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:29:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:29:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:29:17 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-13 20:29:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:29:17 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-13 20:29:17 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-13 20:29:17 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-13 20:29:17 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-13 20:29:17 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:29:17 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:29:17 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:29:17 LOG2 antvel: Parameters to Doppler: Topocentric 88157 2008 287 0.0 2008-Oct-13 20:29:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:29:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-13 20:29:17 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-13 20:29:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:29:17 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:29:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-13 20:29:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:29:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:29:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:29:17 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-13 20:29:17 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.566403 2008.7881003941998 18.999933 2008-Oct-13 20:29:17 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000114 9.003333333333330 2008-Oct-13 20:29:17 LOG4 log_alfabeam: ALFABEAM 1 21.548939272623812 9.108298715916879 2008-Oct-13 20:29:17 LOG4 log_alfabeam: ALFABEAM 2 21.544222840912170 9.039704798283259 2008-Oct-13 20:29:17 LOG4 log_alfabeam: ALFABEAM 3 21.545241461650871 8.934626826834988 2008-Oct-13 20:29:17 LOG4 log_alfabeam: ALFABEAM 4 21.551086374255629 8.898393928819459 2008-Oct-13 20:29:17 LOG4 log_alfabeam: ALFABEAM 5 21.555819912142159 8.967727039965554 2008-Oct-13 20:29:17 LOG4 log_alfabeam: ALFABEAM 6 21.554691482567979 9.072547818317457 2008-Oct-13 20:29:17 INFO2 take_data: Starting WAPP+GALFA scan: 828700349 2008-Oct-13 20:29:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:29:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:29:18 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-13 20:29:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:29:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-13 20:29:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:29:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:29:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:29:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1759.00 2008-Oct-13 20:29:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:29:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:29:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:29:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:29:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:29:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:29:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:29:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:29:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:29:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:29:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:29:29 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-13 20:29:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:29:29 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-13 20:29:29 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-13 20:29:29 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-13 20:29:29 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-13 20:29:29 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:29:29 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:29:29 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:29:29 LOG2 antvel: Parameters to Doppler: Topocentric 88169 2008 287 0.0 2008-Oct-13 20:29:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:29:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-13 20:29:29 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-13 20:29:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:29:29 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:29:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-13 20:29:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:29:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:29:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:29:29 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-13 20:29:29 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.569745 2008.7881007744568 18.999933 2008-Oct-13 20:29:29 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000143 9.003333333333336 2008-Oct-13 20:29:29 LOG4 log_alfabeam: ALFABEAM 1 21.548975648644191 9.108377965093675 2008-Oct-13 20:29:29 LOG4 log_alfabeam: ALFABEAM 2 21.544235509281371 9.040143441492233 2008-Oct-13 20:29:29 LOG4 log_alfabeam: ALFABEAM 3 21.545217734309084 8.934989432506567 2008-Oct-13 20:29:29 LOG4 log_alfabeam: ALFABEAM 4 21.551050025401398 8.898312726701171 2008-Oct-13 20:29:29 LOG4 log_alfabeam: ALFABEAM 5 21.555807499679300 8.967285066252732 2008-Oct-13 20:29:29 LOG4 log_alfabeam: ALFABEAM 6 21.554715397272794 9.072190255507154 2008-Oct-13 20:29:29 INFO2 take_data: Starting WAPP+GALFA scan: 828700350 2008-Oct-13 20:29:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:29:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:29:30 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-13 20:29:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:29:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-13 20:29:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:29:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:29:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:29:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1771.00 2008-Oct-13 20:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:29:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:29:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:29:41 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-13 20:29:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:29:41 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-13 20:29:41 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-13 20:29:41 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-13 20:29:41 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-13 20:29:41 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:29:41 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:29:41 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:29:41 LOG2 antvel: Parameters to Doppler: Topocentric 88181 2008 287 0.0 2008-Oct-13 20:29:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:29:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-13 20:29:41 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-13 20:29:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:29:41 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:29:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-13 20:29:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:29:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:29:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:29:41 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-13 20:29:41 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.573087 2008.7881011547138 18.999933 2008-Oct-13 20:29:41 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000264 9.003333333333334 2008-Oct-13 20:29:41 LOG4 log_alfabeam: ALFABEAM 1 21.549012043696475 9.108454432187765 2008-Oct-13 20:29:41 LOG4 log_alfabeam: ALFABEAM 2 21.544248326123373 9.040581014187255 2008-Oct-13 20:29:41 LOG4 log_alfabeam: ALFABEAM 3 21.545194138637726 8.935353753173143 2008-Oct-13 20:29:41 LOG4 log_alfabeam: ALFABEAM 4 21.551013656149767 8.898234304583420 2008-Oct-13 20:29:41 LOG4 log_alfabeam: ALFABEAM 5 21.555794936367953 8.966844123033745 2008-Oct-13 20:29:41 LOG4 log_alfabeam: ALFABEAM 6 21.554739183753110 9.071830947118743 2008-Oct-13 20:29:41 INFO2 take_data: Starting WAPP+GALFA scan: 828700351 2008-Oct-13 20:29:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:29:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:29:42 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-13 20:29:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:29:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-13 20:29:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:29:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:29:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:29:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1783.00 2008-Oct-13 20:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:29:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:29:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:29:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:29:53 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-13 20:29:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:29:53 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-13 20:29:53 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-13 20:29:53 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-13 20:29:53 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-13 20:29:53 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:29:53 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:29:53 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:29:53 LOG2 antvel: Parameters to Doppler: Topocentric 88193 2008 287 0.0 2008-Oct-13 20:29:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:29:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-13 20:29:53 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-13 20:29:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:29:53 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:29:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-13 20:29:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:29:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:29:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:29:53 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-13 20:29:53 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.576430 2008.7881015349708 18.999933 2008-Oct-13 20:29:53 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000040 9.003333333333334 2008-Oct-13 20:29:53 LOG4 log_alfabeam: ALFABEAM 1 21.549048465683509 9.108528134620352 2008-Oct-13 20:29:53 LOG4 log_alfabeam: ALFABEAM 2 21.544261294174181 9.041017611870204 2008-Oct-13 20:29:53 LOG4 log_alfabeam: ALFABEAM 3 21.545170669467382 8.935719867345041 2008-Oct-13 20:29:53 LOG4 log_alfabeam: ALFABEAM 4 21.550977258602579 8.898158644783660 2008-Oct-13 20:29:53 LOG4 log_alfabeam: ALFABEAM 5 21.555782219506884 8.966404114364948 2008-Oct-13 20:29:53 LOG4 log_alfabeam: ALFABEAM 6 21.554762847203271 9.071469815320556 2008-Oct-13 20:29:53 INFO2 take_data: Starting WAPP+GALFA scan: 828700352 2008-Oct-13 20:29:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:29:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:29:54 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-13 20:29:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:29:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-13 20:29:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:29:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:29:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:29:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1795.00 2008-Oct-13 20:29:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:29:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:29:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:29:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:29:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:29:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:29:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:29:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:29:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:30:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:30:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:30:05 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-13 20:30:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:30:05 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-13 20:30:05 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-13 20:30:05 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-13 20:30:05 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-13 20:30:05 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:30:05 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:30:05 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:30:05 LOG2 antvel: Parameters to Doppler: Topocentric 88205 2008 287 0.0 2008-Oct-13 20:30:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:30:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-13 20:30:05 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-13 20:30:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:30:05 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:30:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-13 20:30:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:30:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:30:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:30:05 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-13 20:30:05 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.579772 2008.788101915228 18.999933 2008-Oct-13 20:30:05 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000129 9.003333333333336 2008-Oct-13 20:30:05 LOG4 log_alfabeam: ALFABEAM 1 21.549084889818264 9.108599024783400 2008-Oct-13 20:30:05 LOG4 log_alfabeam: ALFABEAM 2 21.544274404474464 9.041452938703992 2008-Oct-13 20:30:05 LOG4 log_alfabeam: ALFABEAM 3 21.545147342635502 8.936087524333237 2008-Oct-13 20:30:05 LOG4 log_alfabeam: ALFABEAM 4 21.550940857529710 8.898085796405635 2008-Oct-13 20:30:05 LOG4 log_alfabeam: ALFABEAM 5 21.555769357865557 8.965965338720881 2008-Oct-13 20:30:05 LOG4 log_alfabeam: ALFABEAM 6 21.554786371634432 9.071107107024798 2008-Oct-13 20:30:05 INFO2 take_data: Starting WAPP+GALFA scan: 828700353 2008-Oct-13 20:30:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:30:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:30:06 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-13 20:30:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:30:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-13 20:30:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:30:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:30:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:30:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1807.00 2008-Oct-13 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:30:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:30:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:30:17 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-13 20:30:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:30:17 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-13 20:30:17 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Oct-13 20:30:17 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-13 20:30:17 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 20:30:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 20:30:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 20:30:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:30:17 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-13 20:30:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:30:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 20:30:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:30:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:30:17 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-13 20:30:17 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-13 20:30:17 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-13 20:30:17 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-13 20:30:17 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-13 20:30:17 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:30:17 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:30:17 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:30:17 LOG2 antvel: Parameters to Doppler: Topocentric 88217 2008 287 0.0 2008-Oct-13 20:30:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:30:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-13 20:30:17 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-13 20:30:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:30:17 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:30:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-13 20:30:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:30:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:30:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:30:17 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-13 20:30:17 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.583115 2008.788102295485 18.999933 2008-Oct-13 20:30:17 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000079 9.003333333333339 2008-Oct-13 20:30:17 LOG4 log_alfabeam: ALFABEAM 1 21.549121334899606 9.108667142280671 2008-Oct-13 20:30:17 LOG4 log_alfabeam: ALFABEAM 2 21.544287663633206 9.041887220874079 2008-Oct-13 20:30:17 LOG4 log_alfabeam: ALFABEAM 3 21.545124145944204 8.936456912112277 2008-Oct-13 20:30:17 LOG4 log_alfabeam: ALFABEAM 4 21.550904434143067 8.898015718998705 2008-Oct-13 20:30:17 LOG4 log_alfabeam: ALFABEAM 5 21.555756344945145 8.965527568461233 2008-Oct-13 20:30:17 LOG4 log_alfabeam: ALFABEAM 6 21.554809769327207 9.070742636433629 2008-Oct-13 20:30:17 INFO2 take_data: Starting WAPP+GALFA scan: 828700354 2008-Oct-13 20:30:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:30:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:30:18 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-13 20:30:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:30:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-13 20:30:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:30:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:30:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:30:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1819.00 2008-Oct-13 20:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:30:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:30:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:30:29 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-13 20:30:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:30:29 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-13 20:30:29 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-13 20:30:29 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-13 20:30:29 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-13 20:30:29 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:30:29 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:30:29 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:30:29 LOG2 antvel: Parameters to Doppler: Topocentric 88229 2008 287 0.0 2008-Oct-13 20:30:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:30:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-13 20:30:29 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-13 20:30:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:30:29 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:30:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-13 20:30:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:30:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:30:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:30:29 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-13 20:30:29 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.586457 2008.788102675742 18.999933 2008-Oct-13 20:30:29 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000043 9.003333333333336 2008-Oct-13 20:30:29 LOG4 log_alfabeam: ALFABEAM 1 21.549157776127448 9.108732444236153 2008-Oct-13 20:30:29 LOG4 log_alfabeam: ALFABEAM 2 21.544301062447502 9.042320164574706 2008-Oct-13 20:30:29 LOG4 log_alfabeam: ALFABEAM 3 21.545101094996465 8.936827777290013 2008-Oct-13 20:30:29 LOG4 log_alfabeam: ALFABEAM 4 21.550868013228346 8.897948456935975 2008-Oct-13 20:30:29 LOG4 log_alfabeam: ALFABEAM 5 21.555743189763547 8.965091100098881 2008-Oct-13 20:30:29 LOG4 log_alfabeam: ALFABEAM 6 21.554833024521045 9.070376653224789 2008-Oct-13 20:30:29 INFO2 take_data: Starting WAPP+GALFA scan: 828700355 2008-Oct-13 20:30:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:30:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:30:30 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-13 20:30:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:30:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-13 20:30:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:30:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:30:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:30:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1831.00 2008-Oct-13 20:30:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:30:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:30:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:30:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:30:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:30:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:30:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:30:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:30:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:30:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:30:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:30:41 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-13 20:30:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:30:41 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-13 20:30:41 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-13 20:30:41 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-13 20:30:41 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-13 20:30:41 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:30:41 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:30:41 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:30:41 LOG2 antvel: Parameters to Doppler: Topocentric 88241 2008 287 0.0 2008-Oct-13 20:30:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:30:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-13 20:30:41 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-13 20:30:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:30:41 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:30:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-13 20:30:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:30:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:30:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:30:41 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-13 20:30:41 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.589800 2008.788103055999 18.999933 2008-Oct-13 20:30:41 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000050 9.003333333333336 2008-Oct-13 20:30:41 LOG4 log_alfabeam: ALFABEAM 1 21.549194232313923 9.108794968300113 2008-Oct-13 20:30:41 LOG4 log_alfabeam: ALFABEAM 2 21.544314607630795 9.042751995238115 2008-Oct-13 20:30:41 LOG4 log_alfabeam: ALFABEAM 3 21.545078177686772 8.937200309043829 2008-Oct-13 20:30:41 LOG4 log_alfabeam: ALFABEAM 4 21.550831575984027 8.897883971718771 2008-Oct-13 20:30:41 LOG4 log_alfabeam: ALFABEAM 5 21.555729885716339 8.964655706724203 2008-Oct-13 20:30:41 LOG4 log_alfabeam: ALFABEAM 6 21.554856149405701 9.070008970381959 2008-Oct-13 20:30:41 INFO2 take_data: Starting WAPP+GALFA scan: 828700356 2008-Oct-13 20:30:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:30:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:30:42 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-13 20:30:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:30:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-13 20:30:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:30:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:30:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:30:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1843.00 2008-Oct-13 20:30:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:30:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:30:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:30:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:30:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:30:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:30:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:30:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:30:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:30:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:30:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:30:53 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-13 20:30:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:30:53 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-13 20:30:53 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-13 20:30:53 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-13 20:30:53 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-13 20:30:53 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:30:53 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:30:53 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:30:53 LOG2 antvel: Parameters to Doppler: Topocentric 88253 2008 287 0.0 2008-Oct-13 20:30:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:30:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-13 20:30:53 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-13 20:30:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:30:53 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:30:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-13 20:30:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:30:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:30:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:30:53 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-13 20:30:53 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.593142 2008.7881034362561 18.999933 2008-Oct-13 20:30:53 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000082 9.003333333333339 2008-Oct-13 20:30:53 LOG4 log_alfabeam: ALFABEAM 1 21.549230678657327 9.108854676331610 2008-Oct-13 20:30:53 LOG4 log_alfabeam: ALFABEAM 2 21.544328289741706 9.043182421224074 2008-Oct-13 20:30:53 LOG4 log_alfabeam: ALFABEAM 3 21.545055409376833 8.937574251412199 2008-Oct-13 20:30:53 LOG4 log_alfabeam: ALFABEAM 4 21.550795147199544 8.897822302985219 2008-Oct-13 20:30:53 LOG4 log_alfabeam: ALFABEAM 5 21.555716442064547 8.964221682751363 2008-Oct-13 20:30:53 LOG4 log_alfabeam: ALFABEAM 6 21.554879128455863 9.069639840218233 2008-Oct-13 20:30:53 INFO2 take_data: Starting WAPP+GALFA scan: 828700357 2008-Oct-13 20:30:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:30:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:30:54 LOG5 begin_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-13 20:30:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:30:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-13 20:30:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:30:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:30:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:30:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1855.00 2008-Oct-13 20:30:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:30:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:30:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:30:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:30:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:30:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:30:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:30:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:30:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:31:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:31:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:31:05 LOG5 end_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-13 20:31:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:31:05 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-13 20:31:05 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-13 20:31:05 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-13 20:31:05 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-13 20:31:05 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:31:05 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:31:05 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:31:05 LOG2 antvel: Parameters to Doppler: Topocentric 88265 2008 287 0.0 2008-Oct-13 20:31:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:31:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-13 20:31:05 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-13 20:31:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:31:05 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:31:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-13 20:31:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:31:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:31:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:31:05 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-13 20:31:05 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.596485 2008.7881038165133 18.999933 2008-Oct-13 20:31:05 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000033 9.003333333333334 2008-Oct-13 20:31:05 LOG4 log_alfabeam: ALFABEAM 1 21.549267133980603 9.108911604019934 2008-Oct-13 20:31:05 LOG4 log_alfabeam: ALFABEAM 2 21.544342115597392 9.043611667182843 2008-Oct-13 20:31:05 LOG4 log_alfabeam: ALFABEAM 3 21.545032778055404 8.937949794753854 2008-Oct-13 20:31:05 LOG4 log_alfabeam: ALFABEAM 4 21.550758708061881 8.897763414196033 2008-Oct-13 20:31:05 LOG4 log_alfabeam: ALFABEAM 5 21.555702852098907 8.963788802030111 2008-Oct-13 20:31:05 LOG4 log_alfabeam: ALFABEAM 6 21.554901973769255 9.069269074519891 2008-Oct-13 20:31:05 INFO2 take_data: Starting WAPP+GALFA scan: 828700358 2008-Oct-13 20:31:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:31:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:31:06 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-13 20:31:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:31:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-13 20:31:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:31:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:31:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:31:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1867.00 2008-Oct-13 20:31:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:31:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:31:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:31:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:31:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:31:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:31:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:31:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:31:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:31:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:31:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:31:17 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-13 20:31:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:31:17 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-13 20:31:17 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-13 20:31:17 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-13 20:31:17 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-13 20:31:17 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:31:17 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:31:17 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:31:17 LOG2 antvel: Parameters to Doppler: Topocentric 88277 2008 287 0.0 2008-Oct-13 20:31:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:31:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-13 20:31:17 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-13 20:31:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:31:17 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:31:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-13 20:31:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:31:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:31:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:31:17 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-13 20:31:17 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.599827 2008.7881041967703 18.999933 2008-Oct-13 20:31:17 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000050 9.003333333333336 2008-Oct-13 20:31:17 LOG4 log_alfabeam: ALFABEAM 1 21.549303573492853 9.108965717955023 2008-Oct-13 20:31:17 LOG4 log_alfabeam: ALFABEAM 2 21.544356075523993 9.044039443770059 2008-Oct-13 20:31:17 LOG4 log_alfabeam: ALFABEAM 3 21.545010298836971 8.938326680674775 2008-Oct-13 20:31:17 LOG4 log_alfabeam: ALFABEAM 4 21.550722283352318 8.897707340257021 2008-Oct-13 20:31:17 LOG4 log_alfabeam: ALFABEAM 5 21.555689125318015 8.963357356742518 2008-Oct-13 20:31:17 LOG4 log_alfabeam: ALFABEAM 6 21.554924670062082 9.068896928101752 2008-Oct-13 20:31:17 INFO2 take_data: Starting WAPP+GALFA scan: 828700359 2008-Oct-13 20:31:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:31:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:31:18 LOG5 begin_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-13 20:31:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:31:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-13 20:31:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:31:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:31:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:31:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1879.00 2008-Oct-13 20:31:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:31:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:31:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:31:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:31:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:31:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:31:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:31:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:31:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:31:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:31:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:31:29 LOG5 end_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-13 20:31:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:31:29 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-13 20:31:29 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-13 20:31:29 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-13 20:31:29 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-13 20:31:29 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:31:29 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:31:29 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:31:29 LOG2 antvel: Parameters to Doppler: Topocentric 88289 2008 287 0.0 2008-Oct-13 20:31:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:31:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-13 20:31:29 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-13 20:31:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:31:29 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:31:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-13 20:31:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:31:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-13 20:31:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:31:29 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-13 20:31:29 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.603170 2008.7881045770273 18.999933 2008-Oct-13 20:31:29 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000040 9.003333333333336 2008-Oct-13 20:31:29 LOG4 log_alfabeam: ALFABEAM 1 21.549340016025337 9.109017051857364 2008-Oct-13 20:31:29 LOG4 log_alfabeam: ALFABEAM 2 21.544370176441451 9.044465974824767 2008-Oct-13 20:31:29 LOG4 log_alfabeam: ALFABEAM 3 21.544987959805717 8.938705100693598 2008-Oct-13 20:31:29 LOG4 log_alfabeam: ALFABEAM 4 21.550685854248464 8.897654046596280 2008-Oct-13 20:31:29 LOG4 log_alfabeam: ALFABEAM 5 21.555675254908206 8.962927121527066 2008-Oct-13 20:31:29 LOG4 log_alfabeam: ALFABEAM 6 21.554947229338214 9.068523211573940 2008-Oct-13 20:31:29 INFO2 take_data: Starting WAPP+GALFA scan: 828700360 2008-Oct-13 20:31:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:31:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:31:30 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-13 20:31:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:31:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-13 20:31:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:31:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:31:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:31:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1891.00 2008-Oct-13 20:31:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:31:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:31:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:31:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:31:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:31:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:31:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:31:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:31:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:31:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:31:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:31:41 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-13 20:31:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:31:41 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-13 20:31:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-13 20:31:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 20:31:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 20:31:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:31:41 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-13 20:31:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:31:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 20:31:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:31:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:31:41 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-13 20:31:41 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-13 20:31:41 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-13 20:31:41 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-13 20:31:41 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:31:41 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78810 J 2008-Oct-13 20:31:41 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:31:41 LOG2 antvel: Parameters to Doppler: Topocentric 88301 2008 287 0.0 2008-Oct-13 20:31:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:31:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-13 20:31:41 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-13 20:31:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:31:41 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:31:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-13 20:31:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:31:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:31:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:31:41 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-13 20:31:41 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.606512 2008.7881049572843 18.999933 2008-Oct-13 20:31:41 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000033 9.003333333333336 2008-Oct-13 20:31:41 LOG4 log_alfabeam: ALFABEAM 1 21.549376436809908 9.109065577036610 2008-Oct-13 20:31:41 LOG4 log_alfabeam: ALFABEAM 2 21.544384408449563 9.044890973424662 2008-Oct-13 20:31:41 LOG4 log_alfabeam: ALFABEAM 3 21.544965775823211 8.939084794123586 2008-Oct-13 20:31:41 LOG4 log_alfabeam: ALFABEAM 4 21.550649445511699 8.897603563396915 2008-Oct-13 20:31:41 LOG4 log_alfabeam: ALFABEAM 5 21.555661250599918 8.962498386204262 2008-Oct-13 20:31:41 LOG4 log_alfabeam: ALFABEAM 6 21.554969636561626 9.068148182116296 2008-Oct-13 20:31:41 INFO2 take_data: Starting WAPP+GALFA scan: 828700361 2008-Oct-13 20:31:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:31:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:31:42 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-13 20:31:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:31:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-13 20:31:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:31:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:31:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:31:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1903.00 2008-Oct-13 20:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:31:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:31:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:31:53 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-13 20:31:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:31:53 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-13 20:31:53 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-13 20:31:53 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-13 20:31:53 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-13 20:31:53 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:31:53 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78811 J 2008-Oct-13 20:31:53 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:31:53 LOG2 antvel: Parameters to Doppler: Topocentric 88313 2008 287 0.0 2008-Oct-13 20:31:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:31:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-13 20:31:53 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-13 20:31:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:31:53 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:31:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-13 20:31:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:31:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:31:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:31:53 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-13 20:31:53 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.609855 2008.7881053375413 18.999933 2008-Oct-13 20:31:53 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000001 9.003333333333336 2008-Oct-13 20:31:53 LOG4 log_alfabeam: ALFABEAM 1 21.549412854684061 9.109111325236229 2008-Oct-13 20:31:53 LOG4 log_alfabeam: ALFABEAM 2 21.544398778570535 9.045314662567836 2008-Oct-13 20:31:53 LOG4 log_alfabeam: ALFABEAM 3 21.544943735070969 8.939465953621657 2008-Oct-13 20:31:53 LOG4 log_alfabeam: ALFABEAM 4 21.550613038312747 8.897555858062860 2008-Oct-13 20:31:53 LOG4 log_alfabeam: ALFABEAM 5 21.555647105475810 8.962070926231178 2008-Oct-13 20:31:53 LOG4 log_alfabeam: ALFABEAM 6 21.554991903640516 9.067771649184174 2008-Oct-13 20:31:53 INFO2 take_data: Starting WAPP+GALFA scan: 828700362 2008-Oct-13 20:31:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:31:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:31:54 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-13 20:31:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:31:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-13 20:31:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:31:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:31:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:31:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1915.00 2008-Oct-13 20:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:32:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:32:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:32:05 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-13 20:32:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:32:05 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-13 20:32:05 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-13 20:32:05 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-13 20:32:05 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-13 20:32:05 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:32:05 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78811 J 2008-Oct-13 20:32:05 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:32:05 LOG2 antvel: Parameters to Doppler: Topocentric 88325 2008 287 0.0 2008-Oct-13 20:32:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:32:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-13 20:32:05 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-13 20:32:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:32:05 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:32:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-13 20:32:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:32:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:32:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:32:05 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-13 20:32:05 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.613197 2008.7881057177985 18.999933 2008-Oct-13 20:32:05 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000068 9.003333333333334 2008-Oct-13 20:32:05 LOG4 log_alfabeam: ALFABEAM 1 21.549449244913934 9.109154272467448 2008-Oct-13 20:32:05 LOG4 log_alfabeam: ALFABEAM 2 21.544413276684111 9.045736757875920 2008-Oct-13 20:32:05 LOG4 log_alfabeam: ALFABEAM 3 21.544921852151916 8.939848316350609 2008-Oct-13 20:32:05 LOG4 log_alfabeam: ALFABEAM 4 21.550576657381097 8.897510956071159 2008-Oct-13 20:32:05 LOG4 log_alfabeam: ALFABEAM 5 21.555632829491739 8.961645028941676 2008-Oct-13 20:32:05 LOG4 log_alfabeam: ALFABEAM 6 21.555014015792363 9.067393872183041 2008-Oct-13 20:32:05 INFO2 take_data: Starting WAPP+GALFA scan: 828700363 2008-Oct-13 20:32:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:32:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:32:06 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-13 20:32:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:32:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-13 20:32:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:32:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:32:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:32:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1927.00 2008-Oct-13 20:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:32:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:32:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:32:17 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-13 20:32:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:32:17 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-13 20:32:17 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-13 20:32:17 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-13 20:32:17 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-13 20:32:17 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:32:17 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78811 J 2008-Oct-13 20:32:17 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:32:17 LOG2 antvel: Parameters to Doppler: Topocentric 88337 2008 287 0.0 2008-Oct-13 20:32:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:32:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-13 20:32:17 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-13 20:32:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:32:17 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:32:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-13 20:32:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:32:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:32:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:32:17 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-13 20:32:17 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.616539 2008.7881060980556 18.999933 2008-Oct-13 20:32:17 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000058 9.003333333333334 2008-Oct-13 20:32:17 LOG4 log_alfabeam: ALFABEAM 1 21.549485615461183 9.109194436886044 2008-Oct-13 20:32:17 LOG4 log_alfabeam: ALFABEAM 2 21.544427905517328 9.046157355850491 2008-Oct-13 20:32:17 LOG4 log_alfabeam: ALFABEAM 3 21.544900121825794 8.940231961100341 2008-Oct-13 20:32:17 LOG4 log_alfabeam: ALFABEAM 4 21.550540294760228 8.897468838996170 2008-Oct-13 20:32:17 LOG4 log_alfabeam: ALFABEAM 5 21.555618419958840 8.961220597418613 2008-Oct-13 20:32:17 LOG4 log_alfabeam: ALFABEAM 6 21.555035978278855 9.067014773064258 2008-Oct-13 20:32:17 INFO2 take_data: Starting WAPP+GALFA scan: 828700364 2008-Oct-13 20:32:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:32:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:32:18 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-13 20:32:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:32:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-13 20:32:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:32:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:32:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:32:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1939.00 2008-Oct-13 20:32:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:32:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:32:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:32:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:32:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:32:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:32:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:32:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:32:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:32:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:32:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:32:29 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-13 20:32:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:32:29 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-13 20:32:29 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-13 20:32:29 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-13 20:32:29 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-13 20:32:29 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:32:29 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78811 J 2008-Oct-13 20:32:29 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:32:29 LOG2 antvel: Parameters to Doppler: Topocentric 88349 2008 287 0.0 2008-Oct-13 20:32:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:32:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-13 20:32:29 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-13 20:32:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:32:29 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:32:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-13 20:32:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:32:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:32:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:32:29 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-13 20:32:29 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.619882 2008.7881064783126 18.999933 2008-Oct-13 20:32:29 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000033 9.003333333333341 2008-Oct-13 20:32:29 LOG4 log_alfabeam: ALFABEAM 1 21.549521974276839 9.109231833986165 2008-Oct-13 20:32:29 LOG4 log_alfabeam: ALFABEAM 2 21.544442667926457 9.046576551649631 2008-Oct-13 20:32:29 LOG4 log_alfabeam: ALFABEAM 3 21.544878538994222 8.940616967977702 2008-Oct-13 20:32:29 LOG4 log_alfabeam: ALFABEAM 4 21.550503942503710 8.897429491074444 2008-Oct-13 20:32:29 LOG4 log_alfabeam: ALFABEAM 5 21.555603874057343 8.960797536058173 2008-Oct-13 20:32:29 LOG4 log_alfabeam: ALFABEAM 6 21.555057796223370 9.066634272429587 2008-Oct-13 20:32:29 INFO2 take_data: Starting WAPP+GALFA scan: 828700365 2008-Oct-13 20:32:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:32:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:32:30 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-13 20:32:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:32:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-13 20:32:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:32:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:32:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:32:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1951.00 2008-Oct-13 20:32:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:32:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:32:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:32:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:32:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:32:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:32:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:32:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:32:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:32:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:32:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:32:41 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-13 20:32:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:32:41 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-13 20:32:41 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-13 20:32:41 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-13 20:32:41 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-13 20:32:41 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:32:41 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78811 J 2008-Oct-13 20:32:41 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:32:41 LOG2 antvel: Parameters to Doppler: Topocentric 88361 2008 287 0.0 2008-Oct-13 20:32:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:32:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-13 20:32:41 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-13 20:32:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:32:41 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:32:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-13 20:32:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:32:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:32:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:32:41 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-13 20:32:41 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.623224 2008.7881068585696 18.999933 2008-Oct-13 20:32:41 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000026 9.003333333333336 2008-Oct-13 20:32:41 LOG4 log_alfabeam: ALFABEAM 1 21.549558296700539 9.109266446782348 2008-Oct-13 20:32:41 LOG4 log_alfabeam: ALFABEAM 2 21.544457553473350 9.046994064928985 2008-Oct-13 20:32:41 LOG4 log_alfabeam: ALFABEAM 3 21.544857117862882 8.941003071191510 2008-Oct-13 20:32:41 LOG4 log_alfabeam: ALFABEAM 4 21.550467625271029 8.897392930770534 2008-Oct-13 20:32:41 LOG4 log_alfabeam: ALFABEAM 5 21.555589202068937 8.960376128239957 2008-Oct-13 20:32:41 LOG4 log_alfabeam: ALFABEAM 6 21.555079455232740 9.066252632756539 2008-Oct-13 20:32:41 INFO2 take_data: Starting WAPP+GALFA scan: 828700366 2008-Oct-13 20:32:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:32:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:32:42 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-13 20:32:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:32:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-13 20:32:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:32:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:32:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:32:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1963.00 2008-Oct-13 20:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:32:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:32:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:32:53 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-13 20:32:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:32:53 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-13 20:32:53 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-13 20:32:53 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-13 20:32:53 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-13 20:32:53 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:32:53 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78811 J 2008-Oct-13 20:32:53 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:32:53 LOG2 antvel: Parameters to Doppler: Topocentric 88373 2008 287 0.0 2008-Oct-13 20:32:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:32:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-13 20:32:53 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-13 20:32:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:32:53 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:32:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-13 20:32:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:32:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-13 20:32:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-13 20:32:53 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-13 20:32:53 LOG5 log_alfabeam: Parameters: 21.550000000000001 9.0033333333333339 21.626567 2008.7881072388268 18.999933 2008-Oct-13 20:32:53 LOG4 log_alfabeam: ALFABEAM 0 21.550000000000029 9.003333333333339 2008-Oct-13 20:32:53 LOG4 log_alfabeam: ALFABEAM 1 21.549594601574658 9.109298302037399 2008-Oct-13 20:32:53 LOG4 log_alfabeam: ALFABEAM 2 21.544472569433015 9.047410116449772 2008-Oct-13 20:32:53 LOG4 log_alfabeam: ALFABEAM 3 21.544835846864455 8.941390466147242 2008-Oct-13 20:32:53 LOG4 log_alfabeam: ALFABEAM 4 21.550431324226274 8.897359130466139 2008-Oct-13 20:32:53 LOG4 log_alfabeam: ALFABEAM 5 21.555574396820003 8.959956151601810 2008-Oct-13 20:32:53 LOG4 log_alfabeam: ALFABEAM 6 21.555100966968837 9.065869660708756 2008-Oct-13 20:32:53 INFO2 take_data: Starting WAPP+GALFA scan: 828700367 2008-Oct-13 20:32:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-13 20:32:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-13 20:32:54 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-13 20:32:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:32:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-13 20:32:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:32:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:32:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:32:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1975.00 2008-Oct-13 20:32:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:32:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:32:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:32:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:32:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:32:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:32:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:32:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:32:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:33:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:33:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-13 20:33:05 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-13 20:33:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-13 20:33:05 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-13 20:33:05 INFO2 smartfreq: Switching off CAL 2008-Oct-13 20:33:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 20:33:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 20:33:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:33:05 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-13 20:33:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:33:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 20:33:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:33:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:33:05 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-13 20:33:05 INFO3 restore_frequencies: Restoring original frequencies 2008-Oct-13 20:33:05 LOG5 antvel: Calling 'antvel 213300.000000 90012.000000 J 0' 2008-Oct-13 20:33:05 LOG2 antvel: Precessing RA = 21:33:00.0 Dec = +09:00:12.0 Epoch = 2008.78811 J 2008-Oct-13 20:33:05 LOG2 antvel: Computed apparent RA = 21:33:27.1 Dec = +09:02:42.5 2008-Oct-13 20:33:05 LOG2 antvel: Parameters to Doppler: Topocentric 88385 2008 287 0.0 2008-Oct-13 20:33:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:33:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-13 20:33:05 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-13 20:33:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:33:05 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:33:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-13 20:33:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:33:05 STOP finish_task: Finishing task 'smart frequency switching' 2008-Oct-13 20:33:05 LOG5 finish_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-13 20:33:05 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Oct-13 20:33:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:33:05 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Oct-13 20:33:05 LOG5 end_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-13 20:33:06 NOTE run_command_file: DONE with command file processing 2008-Oct-13 20:33:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Oct-13 20:33:06 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Oct-13 20:33:06 LOG5 finish_task: Level: (1) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-13 20:33:06 DONE finish_task: DONE finished running: command file 'command_galfasrc' 2008-Oct-13 20:33:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:33:06 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'OK' 2008-Oct-13 20:33:06 LOG5 end_task: Level: (1) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-13 20:33:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-13 20:33:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:33:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:33:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:33:20 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-13 20:33:20 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-13 20:33:20 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-13 20:33:20 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-13 20:33:20 LOG5 begin_task: Level: (1) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-13 20:33:20 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-13 20:33:20 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-13 20:33:20 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-13 20:33:20 LOG5 end_task: Level: (1) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-13 20:33:20 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-13 20:33:20 LOG3 exec_msg: Closing socket 2008-Oct-13 20:33:20 LOG3 exec_msg: Closing socket 2008-Oct-13 20:33:20 LOG3 exec_msg: Closing socket 2008-Oct-13 20:33:20 LOG3 exec_msg: Closing socket 2008-Oct-13 20:33:23 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-13 20:33:23 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-13 20:33:23 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-13 20:33:23 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-13 20:34:17 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-13 20:34:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-13 20:34:20 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-13 20:34:20 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-13 20:34:20 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-13 20:34:21 LOG5 begin_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-13 20:34:21 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-13 20:34:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-13 20:34:21 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-13 20:34:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 20:34:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:34:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 20:34:21 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-13 20:34:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 20:34:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 20:34:21 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-13 20:34:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 20:34:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:34:21 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-13 20:34:21 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-13 20:34:21 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-13 20:34:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-13 20:34:21 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-13 20:34:21 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-13 20:34:21 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-13 20:34:21 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-13 20:34:21 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-13 20:34:21 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-13 20:34:21 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-13 20:34:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-13 20:34:21 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-13 20:34:21 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-13 20:34:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-13 20:34:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:34:21 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-13 20:34:21 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-13 20:34:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-13 20:34:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-13 20:34:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:34:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:34:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:34:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:34:22 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-13 20:34:22 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-13 20:34:22 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-13 20:34:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-13 20:34:22 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-13 20:34:22 LOG5 finish_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-13 20:34:22 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-13 20:34:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:34:22 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-13 20:34:22 LOG5 end_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-13 20:34:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-13 20:34:22 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-13 20:34:22 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-13 20:34:22 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-13 20:34:22 LOG5 begin_task: Level: (1) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-13 20:34:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-13 20:34:22 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-13 20:34:22 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-13 20:34:22 START begin_task: Starting task 'selecting calibration port' 2008-Oct-13 20:34:22 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-13 20:34:22 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-13 20:34:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-13 20:34:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:34:22 START begin_task: Starting task 'waiting on calport' 2008-Oct-13 20:34:22 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-13 20:34:23 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-13 20:34:23 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-13 20:34:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:34:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:34:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 20:34:23 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-13 20:34:23 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-13 20:34:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-13 20:34:23 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-13 20:34:23 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-13 20:34:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 20:34:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 20:34:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:34:23 LOG5 begin_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-13 20:34:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:34:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:34:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 20:34:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:34:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:34:23 LOG5 end_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-13 20:34:23 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-13 20:34:23 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-13 20:34:23 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-13 20:34:23 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-13 20:34:23 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-13 20:34:23 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-13 20:34:23 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-13 20:34:23 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-13 20:34:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:34:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:34:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:34:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:34:23 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-13 20:34:23 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-13 20:34:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:34:23 LOG5 begin_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-13 20:34:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-13 20:34:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-13 20:34:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:34:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 20:34:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 20:34:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:34:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:34:23 LOG5 end_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-13 20:34:23 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-13 20:34:23 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-13 20:34:23 LOG5 finish_task: Level: (1) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-13 20:34:23 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-13 20:34:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:34:23 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-13 20:34:23 LOG5 end_task: Level: (1) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-13 20:34:23 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-13 20:34:24 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-13 20:34:24 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-13 20:34:24 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-13 20:34:24 LOG5 begin_task: Level: (1) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-13 20:34:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-13 20:34:24 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-13 20:34:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-13 20:34:24 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-13 20:34:24 LOG5 finish_task: Level: (1) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-13 20:34:24 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-13 20:34:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:34:24 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-13 20:34:24 LOG5 end_task: Level: (1) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-13 20:34:24 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-13 20:34:24 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-13 20:34:24 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-13 20:37:18 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-13 20:37:18 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-13 20:37:18 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-13 20:37:18 LOG5 begin_task: Level: (1) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-13 20:37:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-13 20:37:18 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-13 20:37:18 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-13 20:37:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-13 20:37:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:37:19 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-13 20:37:19 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-13 20:37:19 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-13 20:37:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:37:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:37:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 20:37:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-13 20:37:21 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-13 20:37:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-13 20:37:21 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-13 20:37:21 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-13 20:37:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-13 20:37:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:37:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:37:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:37:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:37:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-13 20:37:21 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-13 20:37:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:37:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-13 20:37:22 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 6 6 dB 2008-Oct-13 20:37:22 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 5 dB 2008-Oct-13 20:37:22 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2008-Oct-13 20:37:22 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 3 dB 2008-Oct-13 20:37:22 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-13 20:37:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-13 20:37:22 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-13 20:37:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.868 1.036 ALFA beam 1: 0.974 0.980 2008-Oct-13 20:37:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.108 1.070 ALFA beam 3: 0.935 0.909 2008-Oct-13 20:37:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.911 1.105 ALFA beam 5: 1.000 0.930 2008-Oct-13 20:37:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.034 1.013 ALFA beam 7: 0.908 0.902 2008-Oct-13 20:37:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-13 20:37:22 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-13 20:37:22 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Oct-13 20:37:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:37:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-13 20:37:22 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-13 20:37:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-13 20:37:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-13 20:37:22 LOG5 finish_task: Level: (1) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-13 20:37:22 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-13 20:37:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-13 20:37:22 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-13 20:37:22 LOG5 end_task: Level: (1) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-13 20:37:29 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Oct-13 20:37:29 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift37p2 214400.0 +090012 J 0 Topocentric velocity(optical) 2008-Oct-13 20:37:29 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift37p2 214400.0 +090012 J 0 Topocentric velocity(optical)' 2008-Oct-13 20:37:29 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Oct-13 20:37:29 LOG5 begin_task: Level: (1) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-13 20:37:29 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2008-Oct-13 20:37:29 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Oct-13 20:37:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift37p2} 2008-Oct-13 20:37:29 INFO5 fixed_driftmap: Start: year = 2008.7881159530509 RA = 21:44:27.2 Dec = +09:02:47.7 2008-Oct-13 20:37:29 NOTE fixed_driftmap: Setting ZA to 9:18:26.0 ... 2008-Oct-13 20:37:29 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 9.31 2008-Oct-13 20:37:29 LOG3 track_source: Calling 'track_source drift37p2 360.0 9.3072199099 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Oct-13 20:37:29 START begin_task: Starting task 'sending tracking commands' 2008-Oct-13 20:37:29 LOG5 begin_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-13 20:37:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift37p2} INFO {Slewing to source 'drift37p2' ...} 2008-Oct-13 20:37:29 INFO1 track_source: Starting to track drift37p2 2008-Oct-13 20:37:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift37p2" 2008-Oct-13 20:37:29 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Oct-13 20:37:29 LOG3 vw_send: To DATATAKING: set dec 9.3072199099 2008-Oct-13 20:37:29 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-13 20:37:29 LOG3 vw_send: To DATATAKING: pnt tr 360.0 9.3072199099 -CF 2008-Oct-13 20:37:29 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-13 20:37:29 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-13 20:37:29 LOG5 finish_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-13 20:37:29 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-13 20:37:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:37:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-13 20:37:29 LOG5 end_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-13 20:37:29 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-13 20:37:29 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-13 20:37:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-13 20:37:29 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-13 20:37:29 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Oct-13 20:37:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-13 20:37:29 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-13 20:37:29 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-13 20:37:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift37p2" 2008-Oct-13 20:37:29 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Oct-13 20:37:29 LOG4 got_cormsg: From DATATAKING: set dec 9.3072199099 2008-Oct-13 20:37:29 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Oct-13 20:37:29 LOG4 got_cormsg: From DATATAKING: vw% 9.3072199099 2008-Oct-13 20:37:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:37:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-13 20:37:29 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 9.3072199099 -CF 2008-Oct-13 20:37:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-13 20:37:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-13 20:37:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:37:30 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-13 20:37:30 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-13 20:37:30 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-13 20:37:30 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-13 20:37:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-13 20:37:30 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-13 20:37:30 LOG5 finish_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-13 20:37:30 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-13 20:37:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:37:30 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-13 20:37:30 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-13 20:37:30 START begin_task: Starting task 'waiting on telescope' 2008-Oct-13 20:37:30 LOG5 begin_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-13 20:37:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-13 20:37:30 LOG3 waittrk: Start waittrk 5 2008-Oct-13 20:37:30 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-13 20:37:30 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-13 20:37:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-13 20:37:35 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-13 20:37:35 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-13 20:37:35 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-13 20:38:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-13 20:38:17 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-13 20:38:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-13 20:38:17 INFO2 waittrk: Now tracking drift37p2 2008-Oct-13 20:38:17 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 9.27 2008-Oct-13 20:38:17 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-13 20:38:17 LOG5 finish_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-13 20:38:17 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Oct-13 20:38:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:38:17 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-13 20:38:17 LOG5 end_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-13 20:38:17 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 20:38:17 LOG5 begin_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-13 20:38:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 20:38:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 20:38:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:38:17 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 20:38:17 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-13 20:38:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 20:38:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:38:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:38:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 20:38:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 20:38:17 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-13 20:38:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 20:38:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 20:38:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 20:38:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 20:38:17 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-13 20:38:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 20:38:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 20:38:17 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-13 20:38:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 20:38:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 20:38:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 20:38:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:38:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 20:38:17 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-13 20:38:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:38:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 20:38:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 20:38:17 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-13 20:38:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 20:38:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:38:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 20:38:17 LOG5 end_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-13 20:38:17 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Oct-13 20:38:17 INFO2 astwait: Waiting for 26 seconds from 00:38:17 to 00:38:43 UTC ... 2008-Oct-13 20:38:17 LOG4 send_obs_status: To obs_status: <1> TASKTIME 26 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Oct-13 20:38:18 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Oct-13 20:38:18 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-13 20:38:43 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Oct-13 20:38:43 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-13 20:38:43 INFO3 astwait: Finished waiting 2008-Oct-13 20:38:43 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-13 20:38:43 LOG5 dopset_later: Calling 'dopset_later 61.441070678189959' 2008-Oct-13 20:38:43 INFO3 dopset_later: Setting Doppler correction for 20:39:43 (61.4 seconds from now) 2008-Oct-13 20:38:43 LOG5 antvel: Calling 'antvel 360.000000 9.307220 F 61.441070678189959' 2008-Oct-13 20:38:43 LOG2 antvel: Transforming current Az = 360.00 ZA = 9.31 to apparent RA = 21:44:27.0 Dec = +09:02:47.7 2008-Oct-13 20:38:43 LOG2 antvel: Parameters to Doppler: Topocentric 88783 2008 287 0.0 2008-Oct-13 20:38:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-13 20:38:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-13 20:38:43 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-13 20:38:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-13 20:38:43 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-13 20:38:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-13 20:38:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:38:43 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-13 20:38:43 LOG5 begin_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-13 20:38:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-13 20:38:43 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-13 20:38:43 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-13 20:38:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-13 20:38:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:38:43 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-13 20:38:43 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-13 20:38:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-13 20:38:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-13 20:38:43 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-13 20:38:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:38:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-13 20:38:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:38:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 20:38:46 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-13 20:38:46 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-13 20:38:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-13 20:38:46 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-13 20:38:46 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-13 20:38:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-13 20:38:46 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:38:46 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:38:46 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:38:46 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-13 20:38:46 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-13 20:38:46 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-13 20:38:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-13 20:38:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:38:46 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-13 20:38:46 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 5 dB 2008-Oct-13 20:38:46 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2008-Oct-13 20:38:46 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 3 dB 2008-Oct-13 20:38:46 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-13 20:38:46 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-13 20:38:46 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-13 20:38:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.108 1.038 ALFA beam 1: 0.978 0.983 2008-Oct-13 20:38:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.107 1.096 ALFA beam 3: 0.950 0.931 2008-Oct-13 20:38:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.930 0.906 ALFA beam 5: 1.000 0.931 2008-Oct-13 20:38:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.049 1.037 ALFA beam 7: 0.916 0.921 2008-Oct-13 20:38:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-13 20:38:47 LOG5 finish_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-13 20:38:47 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-13 20:38:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:38:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-13 20:38:47 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-13 20:38:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 20:38:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-13 20:38:47 LOG5 finish_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-13 20:38:47 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-13 20:38:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:38:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-13 20:38:47 LOG5 end_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-13 20:38:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:38:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:38:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:38:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:38:47 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:44:27.2 LST = 21:43:29.6 diff = 57.6 secs 2008-Oct-13 20:38:47 INFO2 fixed_driftmap: Waiting 55.6 seconds for RA 21:44:27 2008-Oct-13 20:38:47 INFO2 lstwait: Waiting for 55.4 secs from LST 21:43:30 to LST 21:44:25 ... 2008-Oct-13 20:38:47 LOG4 send_obs_status: To obs_status: <1> TASKTIME 55.447081474351826 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Oct-13 20:38:47 START begin_task: Starting task 'waiting on wait on LST' 2008-Oct-13 20:38:47 LOG5 begin_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-13 20:38:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 20:38:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0008.fits 2008-Oct-13 20:38:48 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081013.a2010.0008.fits} 2008-Oct-13 20:39:42 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Oct-13 20:39:42 LOG5 end_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-13 20:39:42 LOG4 lstwait: Finished waiting 0.55 seconds late 2008-Oct-13 20:39:42 INFO3 lstwait: Finished waiting 2008-Oct-13 20:39:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-13 20:39:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Oct-13 20:39:42 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-13 20:39:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 20:39:42 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 20:39:43 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 20:39:43 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 20:39:43 LOG5 begin_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-13 20:39:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 20:39:43 INFO2 take_data: Starting WAPP scan: 828700368 2008-Oct-13 20:39:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 20:39:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 20:39:43 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-13 20:39:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:39:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2384.00 2008-Oct-13 20:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:49:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:49:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 20:49:44 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-13 20:49:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 20:49:44 LOG5 end_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-13 20:49:44 LOG1 fixed_driftmap: New position: year = 2008.7881392754834 RA = 21:54:02.7 RA/Dec = 21:54:30.0 +09:02:52.2 2008-Oct-13 20:49:44 NOTE fixed_driftmap: Correcting ZA to 9:18:21.5 ... 2008-Oct-13 20:49:44 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.3059819341 -CF 2008-Oct-13 20:49:44 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 20:49:44 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 20:49:44 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-13 20:49:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 20:49:44 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 20:49:44 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-13 20:49:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 20:49:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 20:49:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:49:44 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 20:49:44 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-13 20:49:44 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.3059819341 -CF 2008-Oct-13 20:49:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:49:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 20:49:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:49:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:49:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 20:49:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 20:49:44 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-13 20:49:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 20:49:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 20:49:44 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 20:49:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 20:49:44 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-13 20:49:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:49:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 20:49:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 20:49:45 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-13 20:49:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 20:49:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 20:49:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 20:49:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:49:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 20:49:45 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-13 20:49:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 20:49:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 20:49:45 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-13 20:49:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 20:49:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:49:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 20:49:45 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-13 20:49:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 20:49:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 20:49:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 20:49:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:49:45 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-13 20:49:45 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:49:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 20:49:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:49:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:49:45 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-13 20:49:45 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 20:49:45 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 20:49:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 20:49:45 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-13 20:49:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 20:49:45 INFO2 take_data: Starting WAPP scan: 828700369 2008-Oct-13 20:49:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 20:49:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 20:49:45 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-13 20:49:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:49:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2986.00 2008-Oct-13 20:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:49:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:49:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 20:49:47 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-13 20:49:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 20:49:47 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-13 20:49:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 20:49:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 20:49:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 20:49:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:49:47 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Oct-13 20:49:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:49:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 20:49:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:49:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:49:48 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Oct-13 20:49:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 20:49:48 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 20:49:48 LOG5 finish_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-13 20:49:48 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 20:49:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:49:48 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 20:49:48 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-13 20:49:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Oct-13 20:49:48 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-13 20:49:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:49:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:49:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:49:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:49:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 20:49:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 20:49:48 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 20:49:48 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 20:49:48 LOG5 begin_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-13 20:49:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 20:49:48 INFO2 take_data: Starting WAPP scan: 828700370 2008-Oct-13 20:49:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 20:49:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 20:49:48 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-13 20:49:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 20:49:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:49:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2989.00 2008-Oct-13 20:49:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0009.fits 2008-Oct-13 20:49:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0009.fits} 2008-Oct-13 20:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:59:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:59:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 20:59:49 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-13 20:59:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 20:59:49 LOG5 end_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-13 20:59:49 LOG1 fixed_driftmap: New position: year = 2008.7881584467766 RA = 22:04:09.2 RA/Dec = 22:04:36.7 +09:02:56.4 2008-Oct-13 20:59:49 NOTE fixed_driftmap: Correcting ZA to 9:18:17.3 ... 2008-Oct-13 20:59:49 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.3048183994 -CF 2008-Oct-13 20:59:49 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 20:59:49 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 20:59:49 LOG5 begin_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-13 20:59:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 20:59:49 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 20:59:49 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-13 20:59:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 20:59:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 20:59:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:59:49 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 20:59:49 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-13 20:59:49 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.3048183994 -CF 2008-Oct-13 20:59:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:59:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 20:59:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 20:59:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:59:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 20:59:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 20:59:50 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-13 20:59:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 20:59:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 20:59:50 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 20:59:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 20:59:50 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-13 20:59:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 20:59:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 20:59:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 20:59:50 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-13 20:59:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 20:59:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 20:59:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 20:59:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:59:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 20:59:50 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-13 20:59:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 20:59:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 20:59:50 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-13 20:59:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 20:59:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 20:59:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 20:59:50 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-13 20:59:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 20:59:50 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 20:59:50 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 20:59:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:59:50 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-Oct-13 20:59:50 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:59:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 20:59:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:59:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:59:50 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-Oct-13 20:59:50 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 20:59:50 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 20:59:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 20:59:50 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Oct-13 20:59:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 20:59:50 INFO2 take_data: Starting WAPP scan: 828700371 2008-Oct-13 20:59:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 20:59:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 20:59:50 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-13 20:59:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:59:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3591.00 2008-Oct-13 20:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 20:59:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 20:59:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 20:59:52 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-13 20:59:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 20:59:52 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Oct-13 20:59:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 20:59:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 20:59:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 20:59:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 20:59:52 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-13 20:59:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 20:59:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 20:59:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 20:59:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 20:59:52 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-13 20:59:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 20:59:52 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 20:59:52 LOG5 finish_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-13 20:59:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 20:59:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 20:59:52 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 20:59:52 LOG5 end_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-13 20:59:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Oct-13 20:59:53 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Oct-13 20:59:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:59:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:59:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:59:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 20:59:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 20:59:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 20:59:53 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 20:59:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 20:59:53 LOG5 begin_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-13 20:59:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 20:59:53 INFO2 take_data: Starting WAPP scan: 828700372 2008-Oct-13 20:59:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 20:59:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 20:59:53 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-13 20:59:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 20:59:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 20:59:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3594.00 2008-Oct-13 20:59:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0010.fits 2008-Oct-13 20:59:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0010.fits} 2008-Oct-13 20:59:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 20:59:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 20:59:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 20:59:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 20:59:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 20:59:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 20:59:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 20:59:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 20:59:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 21:09:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 21:09:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 21:09:54 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-13 21:09:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 21:09:54 LOG5 end_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-13 21:09:54 LOG1 fixed_driftmap: New position: year = 2008.7881776180698 RA = 22:14:15.8 RA/Dec = 22:14:43.3 +09:03:00.2 2008-Oct-13 21:09:54 NOTE fixed_driftmap: Correcting ZA to 9:18:13.5 ... 2008-Oct-13 21:09:54 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.3037396982 -CF 2008-Oct-13 21:09:54 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 21:09:54 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 21:09:54 LOG5 begin_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-13 21:09:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 21:09:54 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 21:09:54 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-13 21:09:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 21:09:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 21:09:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 21:09:54 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 21:09:54 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-13 21:09:54 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.3037396982 -CF 2008-Oct-13 21:09:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:09:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 21:09:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 21:09:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:09:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 21:09:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 21:09:54 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-13 21:09:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 21:09:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 21:09:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 21:09:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 21:09:55 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-13 21:09:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:09:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 21:09:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 21:09:55 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-13 21:09:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 21:09:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 21:09:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 21:09:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 21:09:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 21:09:55 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-13 21:09:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 21:09:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 21:09:55 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-13 21:09:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 21:09:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 21:09:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 21:09:55 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-13 21:09:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 21:09:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 21:09:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 21:09:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 21:09:55 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2008-Oct-13 21:09:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 21:09:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 21:09:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 21:09:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 21:09:55 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2008-Oct-13 21:09:55 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 21:09:55 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 21:09:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 21:09:55 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Oct-13 21:09:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 21:09:55 INFO2 take_data: Starting WAPP scan: 828700373 2008-Oct-13 21:09:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 21:09:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 21:09:55 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Oct-13 21:09:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 21:09:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4196.00 2008-Oct-13 21:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 21:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 21:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 21:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 21:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 21:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 21:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 21:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 21:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 21:09:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 21:09:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 21:09:57 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Oct-13 21:09:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 21:09:57 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Oct-13 21:09:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 21:09:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 21:09:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 21:09:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 21:09:57 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Oct-13 21:09:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 21:09:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 21:09:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 21:09:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 21:09:57 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Oct-13 21:09:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 21:09:57 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 21:09:57 LOG5 finish_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-13 21:09:57 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 21:09:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 21:09:57 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 21:09:57 LOG5 end_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-13 21:09:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Oct-13 21:09:57 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Oct-13 21:09:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:09:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:09:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:09:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:09:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 21:09:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 21:09:58 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 21:09:58 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 21:09:58 LOG5 begin_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2008-Oct-13 21:09:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 21:09:58 INFO2 take_data: Starting WAPP scan: 828700374 2008-Oct-13 21:09:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 21:09:58 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 21:09:58 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Oct-13 21:09:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 21:09:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 21:09:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4199.00 2008-Oct-13 21:09:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0011.fits 2008-Oct-13 21:09:58 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0011.fits} 2008-Oct-13 21:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 21:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 21:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 21:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 21:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 21:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 21:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 21:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 21:10:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 21:19:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 21:19:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 21:19:59 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Oct-13 21:19:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 21:19:59 LOG5 end_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2008-Oct-13 21:19:59 LOG1 fixed_driftmap: New position: year = 2008.7881967893629 RA = 22:24:22.3 RA/Dec = 22:24:50.0 +09:03:03.8 2008-Oct-13 21:19:59 NOTE fixed_driftmap: Correcting ZA to 9:18:09.9 ... 2008-Oct-13 21:19:59 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.3027479232 -CF 2008-Oct-13 21:19:59 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 21:19:59 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 21:19:59 LOG5 begin_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2008-Oct-13 21:19:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 21:19:59 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 21:19:59 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Oct-13 21:19:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 21:19:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 21:19:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 21:19:59 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 21:19:59 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2008-Oct-13 21:19:59 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.3027479232 -CF 2008-Oct-13 21:19:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:19:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 21:19:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 21:19:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:19:59 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 21:19:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 21:19:59 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2008-Oct-13 21:19:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 21:19:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 21:19:59 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 21:19:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 21:19:59 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2008-Oct-13 21:19:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:20:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 21:20:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 21:20:00 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2008-Oct-13 21:20:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 21:20:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 21:20:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 21:20:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 21:20:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 21:20:00 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Oct-13 21:20:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 21:20:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 21:20:00 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Oct-13 21:20:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 21:20:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 21:20:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 21:20:00 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Oct-13 21:20:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 21:20:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 21:20:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 21:20:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 21:20:01 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-Oct-13 21:20:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 21:20:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 21:20:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 21:20:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 21:20:01 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-Oct-13 21:20:01 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 21:20:01 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 21:20:01 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 21:20:01 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-Oct-13 21:20:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 21:20:01 INFO2 take_data: Starting WAPP scan: 828700375 2008-Oct-13 21:20:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 21:20:01 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 21:20:01 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Oct-13 21:20:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 21:20:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4802.00 2008-Oct-13 21:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 21:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 21:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 21:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 21:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 21:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 21:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 21:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 21:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 21:20:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 21:20:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 21:20:03 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Oct-13 21:20:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 21:20:03 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-Oct-13 21:20:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 21:20:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 21:20:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 21:20:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 21:20:03 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Oct-13 21:20:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 21:20:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 21:20:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 21:20:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 21:20:03 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Oct-13 21:20:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 21:20:03 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 21:20:03 LOG5 finish_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2008-Oct-13 21:20:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 21:20:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 21:20:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 21:20:03 LOG5 end_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2008-Oct-13 21:20:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Oct-13 21:20:04 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Oct-13 21:20:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:20:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:20:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:20:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:20:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 21:20:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 21:20:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 21:20:04 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 21:20:04 LOG5 begin_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2008-Oct-13 21:20:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 21:20:04 INFO2 take_data: Starting WAPP scan: 828700376 2008-Oct-13 21:20:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 21:20:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 21:20:04 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Oct-13 21:20:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 21:20:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 21:20:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4805.00 2008-Oct-13 21:20:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0012.fits 2008-Oct-13 21:20:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0012.fits} 2008-Oct-13 21:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 21:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 21:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 21:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 21:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 21:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 21:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 21:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 21:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 21:30:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 21:30:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 21:30:05 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Oct-13 21:30:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 21:30:05 LOG5 end_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2008-Oct-13 21:30:05 LOG1 fixed_driftmap: New position: year = 2008.788215992344 RA = 22:34:29.9 RA/Dec = 22:34:57.7 +09:03:07.1 2008-Oct-13 21:30:05 NOTE fixed_driftmap: Correcting ZA to 9:18:06.6 ... 2008-Oct-13 21:30:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.3018435847 -CF 2008-Oct-13 21:30:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 21:30:05 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 21:30:05 LOG5 begin_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2008-Oct-13 21:30:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 21:30:05 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 21:30:05 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Oct-13 21:30:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 21:30:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 21:30:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 21:30:05 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 21:30:05 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-Oct-13 21:30:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.3018435847 -CF 2008-Oct-13 21:30:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:30:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 21:30:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 21:30:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:30:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 21:30:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 21:30:05 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-Oct-13 21:30:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 21:30:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 21:30:05 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 21:30:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 21:30:05 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Oct-13 21:30:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:30:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 21:30:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 21:30:06 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Oct-13 21:30:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 21:30:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 21:30:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 21:30:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 21:30:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 21:30:06 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Oct-13 21:30:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 21:30:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 21:30:06 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Oct-13 21:30:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 21:30:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 21:30:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 21:30:06 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Oct-13 21:30:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 21:30:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 21:30:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 21:30:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 21:30:06 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Oct-13 21:30:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 21:30:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 21:30:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 21:30:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 21:30:06 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Oct-13 21:30:06 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 21:30:06 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 21:30:06 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 21:30:06 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Oct-13 21:30:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 21:30:06 INFO2 take_data: Starting WAPP scan: 828700377 2008-Oct-13 21:30:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 21:30:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 21:30:06 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Oct-13 21:30:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 21:30:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5407.00 2008-Oct-13 21:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 21:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 21:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 21:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 21:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 21:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 21:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 21:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 21:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 21:30:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 21:30:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 21:30:08 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Oct-13 21:30:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 21:30:08 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Oct-13 21:30:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 21:30:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 21:30:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 21:30:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 21:30:08 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Oct-13 21:30:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 21:30:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 21:30:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 21:30:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 21:30:08 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Oct-13 21:30:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 21:30:08 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 21:30:08 LOG5 finish_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2008-Oct-13 21:30:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 21:30:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 21:30:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 21:30:08 LOG5 end_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2008-Oct-13 21:30:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2008-Oct-13 21:30:08 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2008-Oct-13 21:30:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:30:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:30:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:30:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:30:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 21:30:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 21:30:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 21:30:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 21:30:09 LOG5 begin_task: Level: (2) ID = <10207> Status = 0 0 0 0 ok 2008-Oct-13 21:30:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 21:30:09 INFO2 take_data: Starting WAPP scan: 828700378 2008-Oct-13 21:30:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 21:30:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 21:30:09 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Oct-13 21:30:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 21:30:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 21:30:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5410.00 2008-Oct-13 21:30:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0013.fits 2008-Oct-13 21:30:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0013.fits} 2008-Oct-13 21:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 21:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 21:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 21:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 21:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 21:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 21:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 21:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 21:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 21:40:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 21:40:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 21:40:10 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Oct-13 21:40:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 21:40:10 LOG5 end_task: Level: (2) ID = <10207> Status = 0 0 0 0 ok 2008-Oct-13 21:40:10 LOG1 fixed_driftmap: New position: year = 2008.7882351636372 RA = 22:44:36.4 RA/Dec = 22:45:04.3 +09:03:10.0 2008-Oct-13 21:40:10 NOTE fixed_driftmap: Correcting ZA to 9:18:03.7 ... 2008-Oct-13 21:40:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.3010314328 -CF 2008-Oct-13 21:40:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 21:40:10 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 21:40:10 LOG5 begin_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-Oct-13 21:40:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 21:40:10 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 21:40:10 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Oct-13 21:40:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 21:40:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 21:40:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 21:40:10 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 21:40:10 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Oct-13 21:40:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.3010314328 -CF 2008-Oct-13 21:40:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:40:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 21:40:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 21:40:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:40:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 21:40:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 21:40:10 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-Oct-13 21:40:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 21:40:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 21:40:10 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 21:40:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 21:40:10 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Oct-13 21:40:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:40:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 21:40:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 21:40:11 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Oct-13 21:40:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 21:40:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 21:40:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 21:40:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 21:40:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 21:40:11 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Oct-13 21:40:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 21:40:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 21:40:11 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Oct-13 21:40:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 21:40:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 21:40:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 21:40:11 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Oct-13 21:40:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 21:40:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 21:40:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 21:40:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 21:40:11 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Oct-13 21:40:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 21:40:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 21:40:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 21:40:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 21:40:11 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Oct-13 21:40:11 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 21:40:11 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 21:40:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 21:40:11 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Oct-13 21:40:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 21:40:11 INFO2 take_data: Starting WAPP scan: 828700379 2008-Oct-13 21:40:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 21:40:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 21:40:11 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Oct-13 21:40:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 21:40:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6012.00 2008-Oct-13 21:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 21:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 21:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 21:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 21:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 21:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 21:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 21:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 21:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 21:40:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 21:40:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 21:40:13 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Oct-13 21:40:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 21:40:13 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Oct-13 21:40:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 21:40:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 21:40:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 21:40:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 21:40:13 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Oct-13 21:40:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 21:40:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 21:40:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 21:40:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 21:40:14 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Oct-13 21:40:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 21:40:14 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 21:40:14 LOG5 finish_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-Oct-13 21:40:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 21:40:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 21:40:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 21:40:14 LOG5 end_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-Oct-13 21:40:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2008-Oct-13 21:40:14 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2008-Oct-13 21:40:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:40:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:40:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:40:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:40:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 21:40:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 21:40:14 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 21:40:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 21:40:14 LOG5 begin_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2008-Oct-13 21:40:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 21:40:14 INFO2 take_data: Starting WAPP scan: 828700380 2008-Oct-13 21:40:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 21:40:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 21:40:14 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-Oct-13 21:40:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 21:40:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 21:40:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6015.00 2008-Oct-13 21:40:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0014.fits 2008-Oct-13 21:40:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0014.fits} 2008-Oct-13 21:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 21:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 21:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 21:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 21:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 21:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 21:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 21:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 21:40:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 21:50:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 21:50:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 21:50:15 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-Oct-13 21:50:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 21:50:15 LOG5 end_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2008-Oct-13 21:50:15 LOG1 fixed_driftmap: New position: year = 2008.7882543349303 RA = 22:54:42.9 RA/Dec = 22:55:11.0 +09:03:12.6 2008-Oct-13 21:50:15 NOTE fixed_driftmap: Correcting ZA to 9:18:01.1 ... 2008-Oct-13 21:50:15 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.3003114753 -CF 2008-Oct-13 21:50:15 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 21:50:15 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 21:50:15 LOG5 begin_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2008-Oct-13 21:50:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 21:50:15 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 21:50:15 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Oct-13 21:50:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 21:50:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 21:50:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 21:50:15 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 21:50:15 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2008-Oct-13 21:50:15 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.3003114753 -CF 2008-Oct-13 21:50:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:50:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 21:50:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 21:50:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:50:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 21:50:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 21:50:16 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2008-Oct-13 21:50:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 21:50:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 21:50:16 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 21:50:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 21:50:16 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Oct-13 21:50:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 21:50:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 21:50:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 21:50:16 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Oct-13 21:50:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 21:50:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 21:50:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 21:50:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 21:50:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 21:50:16 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Oct-13 21:50:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 21:50:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 21:50:16 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Oct-13 21:50:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 21:50:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 21:50:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 21:50:16 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Oct-13 21:50:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 21:50:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 21:50:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 21:50:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 21:50:16 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2008-Oct-13 21:50:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 21:50:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 21:50:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 21:50:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 21:50:16 LOG5 end_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2008-Oct-13 21:50:16 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 21:50:16 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 21:50:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 21:50:16 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Oct-13 21:50:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 21:50:16 INFO2 take_data: Starting WAPP scan: 828700381 2008-Oct-13 21:50:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 21:50:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 21:50:16 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Oct-13 21:50:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 21:50:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6617.00 2008-Oct-13 21:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 21:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 21:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 21:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 21:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 21:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 21:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 21:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 21:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 21:50:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 21:50:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 21:50:18 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Oct-13 21:50:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 21:50:18 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Oct-13 21:50:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 21:50:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 21:50:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 21:50:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 21:50:18 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Oct-13 21:50:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 21:50:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 21:50:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 21:50:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 21:50:18 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Oct-13 21:50:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 21:50:18 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 21:50:18 LOG5 finish_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2008-Oct-13 21:50:18 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 21:50:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 21:50:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 21:50:19 LOG5 end_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2008-Oct-13 21:50:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2008-Oct-13 21:50:19 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2008-Oct-13 21:50:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:50:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:50:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:50:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 21:50:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 21:50:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 21:50:19 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 21:50:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 21:50:19 LOG5 begin_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2008-Oct-13 21:50:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 21:50:19 INFO2 take_data: Starting WAPP scan: 828700382 2008-Oct-13 21:50:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 21:50:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 21:50:19 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Oct-13 21:50:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 21:50:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 21:50:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6620.00 2008-Oct-13 21:50:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0015.fits 2008-Oct-13 21:50:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0015.fits} 2008-Oct-13 21:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 21:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 21:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 21:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 21:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 21:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 21:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 21:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 21:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 22:00:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 22:00:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 22:00:20 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Oct-13 22:00:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 22:00:20 LOG5 end_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2008-Oct-13 22:00:20 LOG1 fixed_driftmap: New position: year = 2008.7882735062235 RA = 23:04:49.5 RA/Dec = 23:05:17.6 +09:03:14.8 2008-Oct-13 22:00:20 NOTE fixed_driftmap: Correcting ZA to 9:17:58.9 ... 2008-Oct-13 22:00:20 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.2996851221 -CF 2008-Oct-13 22:00:20 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 22:00:20 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 22:00:20 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2008-Oct-13 22:00:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 22:00:20 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 22:00:20 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Oct-13 22:00:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 22:00:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 22:00:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 22:00:20 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 22:00:20 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2008-Oct-13 22:00:20 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.2996851221 -CF 2008-Oct-13 22:00:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:00:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 22:00:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 22:00:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:00:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 22:00:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 22:00:20 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2008-Oct-13 22:00:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 22:00:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 22:00:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 22:00:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 22:00:21 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Oct-13 22:00:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:00:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 22:00:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 22:00:21 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Oct-13 22:00:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 22:00:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 22:00:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 22:00:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 22:00:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 22:00:21 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-Oct-13 22:00:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 22:00:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 22:00:21 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-Oct-13 22:00:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 22:00:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 22:00:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 22:00:21 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Oct-13 22:00:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 22:00:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 22:00:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 22:00:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 22:00:21 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2008-Oct-13 22:00:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 22:00:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 22:00:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 22:00:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 22:00:21 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2008-Oct-13 22:00:21 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 22:00:21 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 22:00:21 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 22:00:21 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Oct-13 22:00:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 22:00:21 INFO2 take_data: Starting WAPP scan: 828700383 2008-Oct-13 22:00:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 22:00:21 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 22:00:21 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2008-Oct-13 22:00:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 22:00:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7222.00 2008-Oct-13 22:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 22:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 22:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 22:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 22:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 22:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 22:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 22:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 22:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 22:00:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 22:00:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 22:00:23 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2008-Oct-13 22:00:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 22:00:23 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Oct-13 22:00:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 22:00:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 22:00:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 22:00:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 22:00:23 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Oct-13 22:00:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 22:00:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 22:00:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 22:00:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 22:00:23 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Oct-13 22:00:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 22:00:23 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 22:00:23 LOG5 finish_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2008-Oct-13 22:00:23 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 22:00:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 22:00:23 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 22:00:23 LOG5 end_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2008-Oct-13 22:00:23 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2008-Oct-13 22:00:23 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2008-Oct-13 22:00:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:00:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:00:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:00:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:00:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 22:00:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 22:00:24 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 22:00:24 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 22:00:24 LOG5 begin_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2008-Oct-13 22:00:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 22:00:24 INFO2 take_data: Starting WAPP scan: 828700384 2008-Oct-13 22:00:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 22:00:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 22:00:24 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Oct-13 22:00:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 22:00:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 22:00:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7225.00 2008-Oct-13 22:00:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0016.fits 2008-Oct-13 22:00:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0016.fits} 2008-Oct-13 22:00:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 22:00:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 22:00:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 22:00:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 22:00:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 22:00:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 22:00:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 22:00:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 22:00:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 22:10:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 22:10:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 22:10:25 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Oct-13 22:10:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 22:10:25 LOG5 end_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2008-Oct-13 22:10:25 LOG1 fixed_driftmap: New position: year = 2008.7882926775167 RA = 23:14:56.0 RA/Dec = 23:15:24.3 +09:03:16.7 2008-Oct-13 22:10:25 NOTE fixed_driftmap: Correcting ZA to 9:17:57.0 ... 2008-Oct-13 22:10:25 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.2991535851 -CF 2008-Oct-13 22:10:25 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 22:10:25 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 22:10:25 LOG5 begin_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2008-Oct-13 22:10:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 22:10:25 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 22:10:25 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2008-Oct-13 22:10:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 22:10:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 22:10:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 22:10:25 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 22:10:25 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2008-Oct-13 22:10:25 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.2991535851 -CF 2008-Oct-13 22:10:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:10:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 22:10:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 22:10:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:10:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 22:10:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 22:10:25 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2008-Oct-13 22:10:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 22:10:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 22:10:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 22:10:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 22:10:26 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Oct-13 22:10:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:10:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 22:10:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 22:10:26 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Oct-13 22:10:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 22:10:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 22:10:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 22:10:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 22:10:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 22:10:26 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Oct-13 22:10:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 22:10:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 22:10:26 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Oct-13 22:10:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 22:10:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 22:10:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 22:10:26 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2008-Oct-13 22:10:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 22:10:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 22:10:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 22:10:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 22:10:26 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-Oct-13 22:10:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 22:10:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 22:10:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 22:10:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 22:10:27 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-Oct-13 22:10:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 22:10:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 22:10:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 22:10:27 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Oct-13 22:10:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 22:10:27 INFO2 take_data: Starting WAPP scan: 828700385 2008-Oct-13 22:10:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 22:10:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 22:10:27 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2008-Oct-13 22:10:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 22:10:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7828.00 2008-Oct-13 22:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 22:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 22:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 22:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 22:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 22:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 22:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 22:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 22:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 22:10:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 22:10:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 22:10:29 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2008-Oct-13 22:10:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 22:10:29 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Oct-13 22:10:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 22:10:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 22:10:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 22:10:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 22:10:29 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Oct-13 22:10:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 22:10:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 22:10:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 22:10:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 22:10:29 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Oct-13 22:10:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 22:10:29 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 22:10:29 LOG5 finish_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2008-Oct-13 22:10:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 22:10:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 22:10:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 22:10:29 LOG5 end_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2008-Oct-13 22:10:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2008-Oct-13 22:10:30 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2008-Oct-13 22:10:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:10:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:10:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:10:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:10:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 22:10:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 22:10:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 22:10:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 22:10:30 LOG5 begin_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2008-Oct-13 22:10:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 22:10:30 INFO2 take_data: Starting WAPP scan: 828700386 2008-Oct-13 22:10:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 22:10:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 22:10:30 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Oct-13 22:10:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 22:10:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 22:10:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7831.00 2008-Oct-13 22:10:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0017.fits 2008-Oct-13 22:10:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0017.fits} 2008-Oct-13 22:10:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 22:10:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 22:10:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 22:10:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 22:10:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 22:10:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 22:10:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 22:10:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 22:10:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 22:20:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 22:20:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 22:20:31 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Oct-13 22:20:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 22:20:31 LOG5 end_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2008-Oct-13 22:20:31 LOG1 fixed_driftmap: New position: year = 2008.7883118804978 RA = 23:25:03.6 RA/Dec = 23:25:32.0 +09:03:18.3 2008-Oct-13 22:20:31 NOTE fixed_driftmap: Correcting ZA to 9:17:55.4 ... 2008-Oct-13 22:20:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.2987172613 -CF 2008-Oct-13 22:20:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 22:20:31 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 22:20:31 LOG5 begin_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2008-Oct-13 22:20:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 22:20:31 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 22:20:31 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Oct-13 22:20:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 22:20:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 22:20:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 22:20:31 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 22:20:31 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Oct-13 22:20:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.2987172613 -CF 2008-Oct-13 22:20:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:20:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 22:20:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 22:20:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:20:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 22:20:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 22:20:31 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Oct-13 22:20:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 22:20:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 22:20:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 22:20:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 22:20:32 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Oct-13 22:20:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:20:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 22:20:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 22:20:32 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Oct-13 22:20:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 22:20:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 22:20:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 22:20:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 22:20:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 22:20:32 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Oct-13 22:20:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 22:20:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 22:20:32 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Oct-13 22:20:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 22:20:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 22:20:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 22:20:32 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Oct-13 22:20:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 22:20:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 22:20:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 22:20:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 22:20:32 LOG5 begin_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Oct-13 22:20:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 22:20:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 22:20:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 22:20:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 22:20:32 LOG5 end_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Oct-13 22:20:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 22:20:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 22:20:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 22:20:32 LOG5 begin_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2008-Oct-13 22:20:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 22:20:32 INFO2 take_data: Starting WAPP scan: 828700387 2008-Oct-13 22:20:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 22:20:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 22:20:32 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-Oct-13 22:20:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 22:20:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8433.00 2008-Oct-13 22:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 22:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 22:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 22:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 22:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 22:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 22:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 22:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 22:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 22:20:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 22:20:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 22:20:34 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-Oct-13 22:20:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 22:20:34 LOG5 end_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2008-Oct-13 22:20:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 22:20:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 22:20:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 22:20:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 22:20:34 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Oct-13 22:20:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 22:20:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 22:20:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 22:20:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 22:20:34 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Oct-13 22:20:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 22:20:34 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 22:20:34 LOG5 finish_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2008-Oct-13 22:20:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 22:20:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 22:20:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 22:20:34 LOG5 end_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2008-Oct-13 22:20:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2008-Oct-13 22:20:34 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2008-Oct-13 22:20:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:20:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:20:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:20:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:20:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 22:20:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 22:20:35 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 22:20:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 22:20:35 LOG5 begin_task: Level: (2) ID = <10262> Status = 0 0 0 0 ok 2008-Oct-13 22:20:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 22:20:35 INFO2 take_data: Starting WAPP scan: 828700388 2008-Oct-13 22:20:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 22:20:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 22:20:35 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2008-Oct-13 22:20:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 22:20:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 22:20:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8436.00 2008-Oct-13 22:20:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0018.fits 2008-Oct-13 22:20:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0018.fits} 2008-Oct-13 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 22:30:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 22:30:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 22:30:36 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2008-Oct-13 22:30:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 22:30:36 LOG5 end_task: Level: (2) ID = <10262> Status = 0 0 0 0 ok 2008-Oct-13 22:30:36 LOG1 fixed_driftmap: New position: year = 2008.7883310517909 RA = 23:35:10.1 RA/Dec = 23:35:38.6 +09:03:19.5 2008-Oct-13 22:30:36 NOTE fixed_driftmap: Correcting ZA to 9:17:54.2 ... 2008-Oct-13 22:30:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.2983784407 -CF 2008-Oct-13 22:30:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 22:30:36 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 22:30:36 LOG5 begin_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2008-Oct-13 22:30:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 22:30:36 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 22:30:36 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Oct-13 22:30:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 22:30:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 22:30:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 22:30:36 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 22:30:36 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Oct-13 22:30:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.2983784407 -CF 2008-Oct-13 22:30:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:30:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 22:30:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 22:30:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:30:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 22:30:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 22:30:36 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Oct-13 22:30:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 22:30:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 22:30:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 22:30:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 22:30:36 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Oct-13 22:30:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:30:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 22:30:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 22:30:37 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Oct-13 22:30:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 22:30:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 22:30:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 22:30:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 22:30:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 22:30:37 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Oct-13 22:30:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 22:30:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 22:30:37 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Oct-13 22:30:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 22:30:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 22:30:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 22:30:37 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Oct-13 22:30:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 22:30:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 22:30:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 22:30:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 22:30:37 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Oct-13 22:30:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 22:30:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 22:30:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 22:30:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 22:30:37 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Oct-13 22:30:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 22:30:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 22:30:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 22:30:37 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Oct-13 22:30:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 22:30:37 INFO2 take_data: Starting WAPP scan: 828700389 2008-Oct-13 22:30:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 22:30:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 22:30:37 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Oct-13 22:30:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 22:30:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9038.00 2008-Oct-13 22:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 22:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 22:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 22:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 22:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 22:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 22:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 22:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 22:30:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 22:30:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 22:30:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 22:30:39 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Oct-13 22:30:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 22:30:39 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Oct-13 22:30:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 22:30:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 22:30:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 22:30:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 22:30:39 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Oct-13 22:30:39 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 22:30:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 22:30:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 22:30:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 22:30:39 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Oct-13 22:30:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 22:30:39 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 22:30:39 LOG5 finish_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2008-Oct-13 22:30:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 22:30:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 22:30:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 22:30:39 LOG5 end_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2008-Oct-13 22:30:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2008-Oct-13 22:30:39 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2008-Oct-13 22:30:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:30:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:30:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:30:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:30:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 22:30:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 22:30:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 22:30:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 22:30:40 LOG5 begin_task: Level: (2) ID = <10273> Status = 0 0 0 0 ok 2008-Oct-13 22:30:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 22:30:40 INFO2 take_data: Starting WAPP scan: 828700390 2008-Oct-13 22:30:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 22:30:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 22:30:40 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Oct-13 22:30:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 22:30:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 22:30:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9041.00 2008-Oct-13 22:30:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0019.fits 2008-Oct-13 22:30:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0019.fits} 2008-Oct-13 22:30:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 22:30:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 22:30:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 22:30:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 22:30:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 22:30:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 22:30:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 22:30:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 22:30:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 22:40:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 22:40:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 22:40:41 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Oct-13 22:40:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 22:40:41 LOG5 end_task: Level: (2) ID = <10273> Status = 0 0 0 0 ok 2008-Oct-13 22:40:41 LOG1 fixed_driftmap: New position: year = 2008.7883502230841 RA = 23:45:16.7 RA/Dec = 23:45:45.3 +09:03:20.4 2008-Oct-13 22:40:41 NOTE fixed_driftmap: Correcting ZA to 9:17:53.3 ... 2008-Oct-13 22:40:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.2981369846 -CF 2008-Oct-13 22:40:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 22:40:41 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 22:40:41 LOG5 begin_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2008-Oct-13 22:40:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 22:40:41 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 22:40:41 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Oct-13 22:40:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 22:40:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 22:40:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 22:40:41 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 22:40:41 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Oct-13 22:40:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.2981369846 -CF 2008-Oct-13 22:40:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:40:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 22:40:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 22:40:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:40:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 22:40:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 22:40:41 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Oct-13 22:40:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 22:40:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 22:40:42 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 22:40:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 22:40:42 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Oct-13 22:40:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 22:40:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 22:40:42 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Oct-13 22:40:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 22:40:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 22:40:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 22:40:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 22:40:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 22:40:42 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Oct-13 22:40:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:40:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 22:40:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 22:40:42 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Oct-13 22:40:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 22:40:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 22:40:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 22:40:42 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Oct-13 22:40:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 22:40:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 22:40:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 22:40:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 22:40:42 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Oct-13 22:40:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 22:40:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 22:40:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 22:40:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 22:40:42 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Oct-13 22:40:42 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 22:40:42 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 22:40:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 22:40:42 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Oct-13 22:40:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 22:40:42 INFO2 take_data: Starting WAPP scan: 828700391 2008-Oct-13 22:40:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 22:40:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 22:40:42 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Oct-13 22:40:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 22:40:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9643.00 2008-Oct-13 22:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 22:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 22:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 22:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 22:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 22:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 22:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 22:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 22:40:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 22:40:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 22:40:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 22:40:44 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Oct-13 22:40:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 22:40:44 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Oct-13 22:40:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 22:40:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 22:40:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 22:40:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 22:40:44 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Oct-13 22:40:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 22:40:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 22:40:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 22:40:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 22:40:44 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Oct-13 22:40:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 22:40:44 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 22:40:44 LOG5 finish_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2008-Oct-13 22:40:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 22:40:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 22:40:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 22:40:44 LOG5 end_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2008-Oct-13 22:40:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2008-Oct-13 22:40:44 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2008-Oct-13 22:40:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:40:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:40:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:40:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:40:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 22:40:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 22:40:45 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 22:40:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 22:40:45 LOG5 begin_task: Level: (2) ID = <10284> Status = 0 0 0 0 ok 2008-Oct-13 22:40:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 22:40:45 INFO2 take_data: Starting WAPP scan: 828700392 2008-Oct-13 22:40:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 22:40:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 22:40:45 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Oct-13 22:40:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 22:40:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 22:40:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9646.00 2008-Oct-13 22:40:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0020.fits 2008-Oct-13 22:40:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0020.fits} 2008-Oct-13 22:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 22:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 22:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 22:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 22:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 22:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 22:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 22:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 22:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 22:50:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 22:50:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 22:50:46 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Oct-13 22:50:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 22:50:46 LOG5 end_task: Level: (2) ID = <10284> Status = 0 0 0 0 ok 2008-Oct-13 22:50:46 LOG1 fixed_driftmap: New position: year = 2008.7883693943772 RA = 23:55:23.2 RA/Dec = 23:55:51.9 +09:03:20.9 2008-Oct-13 22:50:46 NOTE fixed_driftmap: Correcting ZA to 9:17:52.8 ... 2008-Oct-13 22:50:46 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.2979933623 -CF 2008-Oct-13 22:50:46 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 22:50:46 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 22:50:46 LOG5 begin_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2008-Oct-13 22:50:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 22:50:46 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 22:50:46 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Oct-13 22:50:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 22:50:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 22:50:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 22:50:46 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 22:50:46 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Oct-13 22:50:46 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.2979933623 -CF 2008-Oct-13 22:50:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:50:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 22:50:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 22:50:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:50:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 22:50:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 22:50:46 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Oct-13 22:50:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 22:50:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 22:50:46 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 22:50:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 22:50:46 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Oct-13 22:50:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 22:50:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 22:50:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 22:50:47 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Oct-13 22:50:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 22:50:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 22:50:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 22:50:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 22:50:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 22:50:47 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2008-Oct-13 22:50:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 22:50:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 22:50:47 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2008-Oct-13 22:50:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 22:50:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 22:50:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 22:50:47 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Oct-13 22:50:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 22:50:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 22:50:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 22:50:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 22:50:47 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Oct-13 22:50:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 22:50:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 22:50:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 22:50:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 22:50:47 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Oct-13 22:50:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 22:50:47 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 22:50:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 22:50:47 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Oct-13 22:50:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 22:50:47 INFO2 take_data: Starting WAPP scan: 828700393 2008-Oct-13 22:50:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 22:50:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 22:50:47 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Oct-13 22:50:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 22:50:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10248.00 2008-Oct-13 22:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 22:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 22:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 22:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 22:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 22:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 22:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 22:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 22:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 22:50:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 22:50:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 22:50:49 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Oct-13 22:50:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 22:50:49 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Oct-13 22:50:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 22:50:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 22:50:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 22:50:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 22:50:49 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Oct-13 22:50:50 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 22:50:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 22:50:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 22:50:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 22:50:50 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Oct-13 22:50:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 22:50:50 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 22:50:50 LOG5 finish_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2008-Oct-13 22:50:50 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 22:50:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 22:50:50 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 22:50:50 LOG5 end_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2008-Oct-13 22:50:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2008-Oct-13 22:50:50 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2008-Oct-13 22:50:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:50:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:50:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:50:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 22:50:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 22:50:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 22:50:50 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 22:50:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 22:50:50 LOG5 begin_task: Level: (2) ID = <10295> Status = 0 0 0 0 ok 2008-Oct-13 22:50:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 22:50:50 INFO2 take_data: Starting WAPP scan: 828700394 2008-Oct-13 22:50:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 22:50:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 22:50:50 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2008-Oct-13 22:50:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 22:50:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 22:50:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10251.00 2008-Oct-13 22:50:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0021.fits 2008-Oct-13 22:50:50 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0021.fits} 2008-Oct-13 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 23:00:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 23:00:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 23:00:51 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2008-Oct-13 23:00:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 23:00:51 LOG5 end_task: Level: (2) ID = <10295> Status = 0 0 0 0 ok 2008-Oct-13 23:00:51 LOG1 fixed_driftmap: New position: year = 2008.7883885656704 RA = 00:05:29.8 RA/Dec = 00:05:58.6 +09:03:21.1 2008-Oct-13 23:00:51 NOTE fixed_driftmap: Correcting ZA to 9:17:52.6 ... 2008-Oct-13 23:00:51 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.2979478549 -CF 2008-Oct-13 23:00:51 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 23:00:51 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 23:00:51 LOG5 begin_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2008-Oct-13 23:00:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 23:00:51 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 23:00:51 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Oct-13 23:00:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 23:00:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 23:00:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 23:00:51 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 23:00:51 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Oct-13 23:00:51 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.2979478549 -CF 2008-Oct-13 23:00:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:00:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 23:00:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 23:00:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:00:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 23:00:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 23:00:52 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Oct-13 23:00:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 23:00:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 23:00:52 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 23:00:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 23:00:52 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Oct-13 23:00:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:00:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 23:00:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 23:00:52 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Oct-13 23:00:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 23:00:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 23:00:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 23:00:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 23:00:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 23:00:53 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2008-Oct-13 23:00:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 23:00:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 23:00:53 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2008-Oct-13 23:00:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 23:00:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 23:00:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 23:00:53 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Oct-13 23:00:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 23:00:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 23:00:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 23:00:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 23:00:53 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Oct-13 23:00:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 23:00:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 23:00:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 23:00:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 23:00:53 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Oct-13 23:00:53 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 23:00:53 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 23:00:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 23:00:53 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Oct-13 23:00:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 23:00:53 INFO2 take_data: Starting WAPP scan: 828700395 2008-Oct-13 23:00:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 23:00:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 23:00:53 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Oct-13 23:00:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 23:00:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10854.00 2008-Oct-13 23:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 23:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 23:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 23:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 23:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 23:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 23:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 23:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 23:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 23:00:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 23:00:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 23:00:55 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Oct-13 23:00:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 23:00:55 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Oct-13 23:00:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 23:00:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 23:00:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 23:00:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 23:00:55 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Oct-13 23:00:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 23:00:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 23:00:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 23:00:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 23:00:55 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Oct-13 23:00:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 23:00:56 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 23:00:56 LOG5 finish_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2008-Oct-13 23:00:56 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 23:00:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 23:00:56 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 23:00:56 LOG5 end_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2008-Oct-13 23:00:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2008-Oct-13 23:00:56 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2008-Oct-13 23:00:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:00:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:00:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:00:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:00:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 23:00:56 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 23:00:56 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 23:00:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 23:00:56 LOG5 begin_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Oct-13 23:00:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 23:00:56 INFO2 take_data: Starting WAPP scan: 828700396 2008-Oct-13 23:00:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 23:00:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 23:00:56 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Oct-13 23:00:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 23:00:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 23:00:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10857.00 2008-Oct-13 23:00:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0022.fits 2008-Oct-13 23:00:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0022.fits} 2008-Oct-13 23:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 23:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 23:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 23:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 23:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 23:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 23:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 23:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 23:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 23:10:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 23:10:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 23:10:57 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Oct-13 23:10:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 23:10:57 LOG5 end_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2008-Oct-13 23:10:57 LOG1 fixed_driftmap: New position: year = 2008.7884077686515 RA = 00:15:37.3 RA/Dec = 00:16:06.3 +09:03:20.9 2008-Oct-13 23:10:57 NOTE fixed_driftmap: Correcting ZA to 9:17:52.8 ... 2008-Oct-13 23:10:57 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.2980007194 -CF 2008-Oct-13 23:10:57 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 23:10:57 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 23:10:57 LOG5 begin_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2008-Oct-13 23:10:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 23:10:57 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 23:10:57 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2008-Oct-13 23:10:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 23:10:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 23:10:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 23:10:57 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 23:10:57 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2008-Oct-13 23:10:57 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.2980007194 -CF 2008-Oct-13 23:10:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:10:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 23:10:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 23:10:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:10:58 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 23:10:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 23:10:58 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2008-Oct-13 23:10:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 23:10:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 23:10:58 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 23:10:58 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 23:10:58 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Oct-13 23:10:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:10:58 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 23:10:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 23:10:58 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Oct-13 23:10:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 23:10:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 23:10:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 23:10:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 23:10:58 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 23:10:58 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Oct-13 23:10:58 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 23:10:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 23:10:58 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Oct-13 23:10:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 23:10:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 23:10:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 23:10:58 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2008-Oct-13 23:10:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 23:10:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 23:10:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 23:10:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 23:10:58 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Oct-13 23:10:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 23:10:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 23:10:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 23:10:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 23:10:58 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Oct-13 23:10:58 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 23:10:58 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 23:10:58 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 23:10:58 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Oct-13 23:10:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 23:10:58 INFO2 take_data: Starting WAPP scan: 828700397 2008-Oct-13 23:10:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 23:10:58 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 23:10:58 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Oct-13 23:10:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 23:10:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11459.00 2008-Oct-13 23:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 23:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 23:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 23:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 23:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 23:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 23:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 23:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 23:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 23:11:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 23:11:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 23:11:00 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Oct-13 23:11:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 23:11:00 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Oct-13 23:11:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 23:11:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 23:11:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 23:11:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 23:11:00 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Oct-13 23:11:00 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 23:11:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 23:11:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 23:11:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 23:11:00 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Oct-13 23:11:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 23:11:00 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 23:11:00 LOG5 finish_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2008-Oct-13 23:11:00 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 23:11:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 23:11:00 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 23:11:00 LOG5 end_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2008-Oct-13 23:11:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2008-Oct-13 23:11:01 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2008-Oct-13 23:11:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:11:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:11:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:11:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:11:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 23:11:01 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 23:11:01 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 23:11:01 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 23:11:01 LOG5 begin_task: Level: (2) ID = <10317> Status = 0 0 0 0 ok 2008-Oct-13 23:11:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 23:11:01 INFO2 take_data: Starting WAPP scan: 828700398 2008-Oct-13 23:11:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 23:11:01 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 23:11:01 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Oct-13 23:11:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 23:11:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 23:11:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11462.00 2008-Oct-13 23:11:01 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0023.fits 2008-Oct-13 23:11:01 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0023.fits} 2008-Oct-13 23:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 23:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 23:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 23:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 23:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 23:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 23:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 23:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 23:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 23:21:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 23:21:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 23:21:02 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Oct-13 23:21:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 23:21:02 LOG5 end_task: Level: (2) ID = <10317> Status = 0 0 0 0 ok 2008-Oct-13 23:21:02 LOG1 fixed_driftmap: New position: year = 2008.7884269399447 RA = 00:25:43.9 RA/Dec = 00:26:12.9 +09:03:20.4 2008-Oct-13 23:21:02 NOTE fixed_driftmap: Correcting ZA to 9:17:53.3 ... 2008-Oct-13 23:21:02 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.2981516802 -CF 2008-Oct-13 23:21:02 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 23:21:02 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 23:21:02 LOG5 begin_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2008-Oct-13 23:21:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 23:21:02 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 23:21:02 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-Oct-13 23:21:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 23:21:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 23:21:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 23:21:02 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 23:21:02 LOG5 begin_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Oct-13 23:21:02 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.2981516802 -CF 2008-Oct-13 23:21:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:21:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 23:21:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 23:21:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:21:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 23:21:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 23:21:02 LOG5 end_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2008-Oct-13 23:21:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 23:21:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 23:21:03 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 23:21:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 23:21:03 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Oct-13 23:21:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:21:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 23:21:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 23:21:03 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Oct-13 23:21:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 23:21:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 23:21:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 23:21:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 23:21:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 23:21:03 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Oct-13 23:21:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 23:21:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 23:21:03 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Oct-13 23:21:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 23:21:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 23:21:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 23:21:03 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-Oct-13 23:21:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 23:21:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 23:21:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 23:21:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 23:21:03 LOG5 begin_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2008-Oct-13 23:21:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 23:21:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 23:21:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 23:21:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 23:21:03 LOG5 end_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2008-Oct-13 23:21:03 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 23:21:03 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 23:21:03 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 23:21:03 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Oct-13 23:21:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 23:21:03 INFO2 take_data: Starting WAPP scan: 828700399 2008-Oct-13 23:21:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 23:21:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 23:21:03 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Oct-13 23:21:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 23:21:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12064.00 2008-Oct-13 23:21:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 23:21:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 23:21:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 23:21:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 23:21:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 23:21:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 23:21:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 23:21:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 23:21:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 23:21:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 23:21:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 23:21:05 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Oct-13 23:21:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 23:21:05 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Oct-13 23:21:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 23:21:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 23:21:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 23:21:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 23:21:05 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-Oct-13 23:21:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 23:21:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 23:21:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 23:21:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 23:21:05 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-Oct-13 23:21:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 23:21:05 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 23:21:05 LOG5 finish_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2008-Oct-13 23:21:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 23:21:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 23:21:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 23:21:05 LOG5 end_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2008-Oct-13 23:21:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2008-Oct-13 23:21:05 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2008-Oct-13 23:21:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:21:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:21:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:21:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:21:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 23:21:06 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 23:21:06 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 23:21:06 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 23:21:06 LOG5 begin_task: Level: (2) ID = <10328> Status = 0 0 0 0 ok 2008-Oct-13 23:21:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 23:21:06 INFO2 take_data: Starting WAPP scan: 828700400 2008-Oct-13 23:21:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 23:21:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 23:21:06 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Oct-13 23:21:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 23:21:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 23:21:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12067.00 2008-Oct-13 23:21:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0024.fits 2008-Oct-13 23:21:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0024.fits} 2008-Oct-13 23:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 23:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 23:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 23:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 23:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 23:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 23:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 23:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 23:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 23:31:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 23:31:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 23:31:07 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Oct-13 23:31:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 23:31:07 LOG5 end_task: Level: (2) ID = <10328> Status = 0 0 0 0 ok 2008-Oct-13 23:31:07 LOG1 fixed_driftmap: New position: year = 2008.7884461112378 RA = 00:35:50.4 RA/Dec = 00:36:19.6 +09:03:19.5 2008-Oct-13 23:31:07 NOTE fixed_driftmap: Correcting ZA to 9:17:54.2 ... 2008-Oct-13 23:31:07 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.2984004493 -CF 2008-Oct-13 23:31:07 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 23:31:07 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 23:31:07 LOG5 begin_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2008-Oct-13 23:31:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 23:31:07 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 23:31:07 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2008-Oct-13 23:31:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 23:31:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 23:31:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 23:31:07 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 23:31:07 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Oct-13 23:31:07 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.2984004493 -CF 2008-Oct-13 23:31:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:31:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 23:31:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 23:31:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:31:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 23:31:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 23:31:07 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Oct-13 23:31:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 23:31:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 23:31:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 23:31:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 23:31:07 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Oct-13 23:31:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:31:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 23:31:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 23:31:08 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Oct-13 23:31:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 23:31:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 23:31:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 23:31:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 23:31:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 23:31:08 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Oct-13 23:31:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 23:31:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 23:31:08 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Oct-13 23:31:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 23:31:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 23:31:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 23:31:08 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2008-Oct-13 23:31:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 23:31:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 23:31:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-13 23:31:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 23:31:08 LOG5 begin_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2008-Oct-13 23:31:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 23:31:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-13 23:31:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 23:31:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 23:31:08 LOG5 end_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2008-Oct-13 23:31:08 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-13 23:31:08 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-13 23:31:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 23:31:08 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Oct-13 23:31:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 23:31:08 INFO2 take_data: Starting WAPP scan: 828700401 2008-Oct-13 23:31:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-13 23:31:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 23:31:08 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2008-Oct-13 23:31:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 23:31:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12669.00 2008-Oct-13 23:31:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 23:31:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 23:31:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 23:31:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 23:31:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 23:31:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 23:31:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 23:31:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 23:31:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 23:31:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 23:31:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 23:31:10 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2008-Oct-13 23:31:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 23:31:10 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Oct-13 23:31:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-13 23:31:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-13 23:31:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-13 23:31:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-13 23:31:10 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Oct-13 23:31:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-13 23:31:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-13 23:31:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-13 23:31:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-13 23:31:10 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Oct-13 23:31:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-13 23:31:10 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-13 23:31:10 LOG5 finish_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2008-Oct-13 23:31:10 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-13 23:31:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-13 23:31:10 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-13 23:31:10 LOG5 end_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2008-Oct-13 23:31:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2008-Oct-13 23:31:10 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2008-Oct-13 23:31:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:31:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:31:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:31:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-13 23:31:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-13 23:31:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-13 23:31:11 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-13 23:31:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-13 23:31:11 LOG5 begin_task: Level: (2) ID = <10339> Status = 0 0 0 0 ok 2008-Oct-13 23:31:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-13 23:31:11 INFO2 take_data: Starting WAPP scan: 828700402 2008-Oct-13 23:31:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-13 23:31:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-13 23:31:11 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2008-Oct-13 23:31:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-13 23:31:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-13 23:31:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12672.00 2008-Oct-13 23:31:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20081013.a2010.0025.fits 2008-Oct-13 23:31:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081013.a2010.0025.fits} 2008-Oct-13 23:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-13 23:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 870.118787 MHz 2008-Oct-13 23:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1609.359943 MHz 2008-Oct-13 23:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1774.933005 MHz 2008-Oct-13 23:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2061.055376 MHz 2008-Oct-13 23:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 931.089391 MHz 2008-Oct-13 23:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1663.658028 MHz 2008-Oct-13 23:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2053.499121 MHz 2008-Oct-13 23:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2131.118324 MHz 2008-Oct-13 23:41:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-13 23:41:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-13 23:41:12 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2008-Oct-13 23:41:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-13 23:41:12 LOG5 end_task: Level: (2) ID = <10339> Status = 0 0 0 0 ok 2008-Oct-13 23:41:12 LOG1 fixed_driftmap: New position: year = 2008.788465282531 RA = 00:45:57.0 RA/Dec = 00:46:26.2 +09:03:18.2 2008-Oct-13 23:41:12 NOTE fixed_driftmap: Correcting ZA to 9:17:55.5 ... 2008-Oct-13 23:41:12 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.2987465446 -CF 2008-Oct-13 23:41:12 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-13 23:41:12 START begin_task: Starting task 'WAPP calibration' 2008-Oct-13 23:41:12 LOG5 begin_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2008-Oct-13 23:41:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-13 23:41:12 START begin_task: Starting task 'selecting calibration type' 2008-Oct-13 23:41:12 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Oct-13 23:41:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-13 23:41:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-13 23:41:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 23:41:12 START begin_task: Starting task 'waiting on setcal' 2008-Oct-13 23:41:12 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2008-Oct-13 23:41:12 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.2987465446 -CF 2008-Oct-13 23:41:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:41:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-13 23:41:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-13 23:41:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:41:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-13 23:41:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-13 23:41:12 LOG5 end_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2008-Oct-13 23:41:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-13 23:41:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 23:41:12 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-13 23:41:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 23:41:12 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Oct-13 23:41:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-13 23:41:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 23:41:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 23:41:13 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Oct-13 23:41:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 23:41:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-13 23:41:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-13 23:41:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-13 23:41:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-13 23:41:13 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-Oct-13 23:41:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-13 23:41:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-13 23:41:13 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-Oct-13 23:41:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-13 23:41:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-13 23:41:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-13 23:41:13 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Oct-13 23:41:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-13 23:41:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-13 23:41:13 LOG3 sock_errsend: To CALCONTROL: CALON STATU