2008-Oct-12 20:21:27 BEGIN executive: CIMA executive starting ... 2008-Oct-12 20:21:27 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-12 20:21:27 INFO1 executive: Using CIMA version 3.0.04 'next' from 2008-09-30 18:33 2008-Oct-12 20:21:27 INFO4 executive: This is an ON-LINE session 2008-Oct-12 20:21:27 INFO4 executive: This is a REMOTE session 2008-Oct-12 20:21:27 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-12 20:21:27 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Kelley Hess, M. Jacquart' 2008-Oct-12 20:21:27 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081012' 2008-Oct-12 20:21:28 LOG2 log_preferences: Currently applied preferences: 2008-Oct-12 20:21:28 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-12 20:21:28 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-12 20:21:28 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-12 20:21:28 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-12 20:21:28 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-12 20:21:28 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-12 20:21:28 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-12 20:21:28 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-12 20:21:28 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-12 20:21:28 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-12 20:21:28 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-12 20:21:28 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-12 20:21:28 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-12 20:21:28 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-12 20:21:28 ALERT executive: CIMA executive ready 2008-Oct-12 20:21:31 NOTE frontend: CIMA frontend ready 2008-Oct-12 20:21:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:21:31 LOG4 got_cormsg: From DATATAKING: setup 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Oct-12 20:21:38 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-12 20:21:38 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-12 20:21:38 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-12 20:21:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:21:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:21:48 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-12 20:21:48 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-12 20:21:48 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-12 20:21:48 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-12 20:21:48 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-12 20:21:48 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-12 20:21:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-12 20:21:48 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-12 20:21:48 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-12 20:21:48 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-12 20:21:48 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-12 20:21:48 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-12 20:21:48 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-12 20:21:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:21:48 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-12 20:21:48 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-12 20:21:48 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-12 20:21:48 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-12 20:21:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:21:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:22:01 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-12 20:22:01 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-12 20:22:01 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-12 20:22:01 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-12 20:22:01 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-12 20:22:01 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-12 20:22:01 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-12 20:22:01 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-12 20:22:01 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-12 20:22:01 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-12 20:22:04 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-12 20:22:04 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-12 20:22:05 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-12 20:22:05 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-12 20:23:20 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-12 20:24:02 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-12 20:24:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-12 20:24:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-12 20:24:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-12 20:24:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-12 20:24:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-12 20:24:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-12 20:24:02 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-12 20:24:02 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-12 20:24:02 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-12 20:24:02 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-12 20:24:02 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-12 20:24:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-12 20:24:02 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-12 20:24:02 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-12 20:24:02 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-12 20:24:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-12 20:24:02 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-12 20:24:03 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-12 20:24:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-12 20:24:04 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-12 20:24:04 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-12 20:24:05 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-12 20:24:05 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-12 20:24:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-12 20:24:05 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-12 20:24:05 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-12 20:24:05 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Oct-12 20:24:05 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-12 20:24:05 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-12 20:24:05 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-12 20:24:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-12 20:24:05 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-12 20:24:05 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-12 20:24:05 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-12 20:24:05 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-12 20:24:05 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-12 20:24:05 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-12 20:24:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:24:05 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-12 20:24:05 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-12 20:24:05 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-12 20:24:05 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-12 20:24:05 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-12 20:24:05 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-12 20:24:05 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-12 20:24:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-12 20:24:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 20:24:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 20:24:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 20:24:05 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-12 20:24:05 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-12 20:24:05 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-12 20:24:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 20:24:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 20:24:06 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-12 20:24:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 20:24:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-12 20:24:06 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-12 20:24:06 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-12 20:24:06 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-12 20:24:06 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-12 20:24:06 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-12 20:24:06 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-12 20:24:06 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-12 20:24:06 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-12 20:24:06 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-12 20:24:06 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-12 20:24:07 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-12 20:24:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-12 20:24:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:24:07 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-12 20:24:07 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-12 20:24:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:24:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:20 COMMAND CIMA-send_to_exec: Sending command to stop observation 2008-Oct-12 20:24:20 LOG4 exec_msg: From OBSERVER: stop_task 2008-Oct-12 20:24:20 WARNING stop_task: WARNING stop at end of current loop/command requested! 2008-Oct-12 20:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 20:24:22 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-12 20:24:22 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 1 0 ok 2008-Oct-12 20:24:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-12 20:24:22 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-12 20:24:22 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 1 0 ok 2008-Oct-12 20:24:22 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-12 20:24:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:24:22 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-12 20:24:22 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 1 0 ok 2008-Oct-12 20:24:22 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-12 20:24:22 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 1 0 ok 2008-Oct-12 20:24:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-12 20:24:22 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-12 20:24:22 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-12 20:24:22 START begin_task: Starting task 'selecting calibration port' 2008-Oct-12 20:24:22 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 1 0 ok 2008-Oct-12 20:24:22 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-12 20:24:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-12 20:24:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:24:22 START begin_task: Starting task 'waiting on calport' 2008-Oct-12 20:24:22 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 1 0 ok 2008-Oct-12 20:24:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:22 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-12 20:24:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:24:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 20:24:22 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-12 20:24:22 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 1 0 ok 2008-Oct-12 20:24:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-12 20:24:22 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-12 20:24:22 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 1 0 ok 2008-Oct-12 20:24:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 20:24:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 20:24:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 20:24:22 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 1 0 ok 2008-Oct-12 20:24:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 20:24:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 20:24:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 20:24:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 20:24:22 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 1 0 ok 2008-Oct-12 20:24:22 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-12 20:24:22 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-12 20:24:22 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-12 20:24:22 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-12 20:24:22 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-12 20:24:22 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-12 20:24:22 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-12 20:24:22 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-12 20:24:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:24:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:24:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:24:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:24:23 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-12 20:24:23 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-12 20:24:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 20:24:23 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 1 0 ok 2008-Oct-12 20:24:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 20:24:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 20:24:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 20:24:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 20:24:23 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 1 0 ok 2008-Oct-12 20:24:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:24:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:24:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:24:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:24:23 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-12 20:24:23 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 1 0 ok 2008-Oct-12 20:24:23 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-12 20:24:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:24:23 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-12 20:24:23 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 1 0 ok 2008-Oct-12 20:24:23 ALERT run_command_file: Stopping command file processing at line 4! 2008-Oct-12 20:24:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Oct-12 20:24:23 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Oct-12 20:24:23 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 1 0 stop 2008-Oct-12 20:24:23 WARNING finish_task: WARNING ended running: command file 'command_galfasrc' 2008-Oct-12 20:24:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Ended 2008-Oct-12 20:24:23 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'STOP' 2008-Oct-12 20:24:23 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 1 0 stop 2008-Oct-12 20:24:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 20:24:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-12 20:24:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-12 20:24:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 20:24:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0000.fits 2008-Oct-12 20:24:24 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081012.a2010.0000.fits} 2008-Oct-12 20:24:31 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-12 20:24:49 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-12 20:24:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-12 20:24:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-12 20:24:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-12 20:24:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-12 20:24:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-12 20:24:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-12 20:24:49 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-12 20:24:49 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-12 20:24:49 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-12 20:24:49 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-12 20:24:49 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-12 20:24:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-12 20:24:50 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-12 20:24:50 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-12 20:24:50 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-12 20:24:50 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-12 20:24:50 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-12 20:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-12 20:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-12 20:24:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-12 20:24:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-12 20:24:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-12 20:24:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-12 20:24:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-12 20:24:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-12 20:24:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-12 20:24:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-12 20:24:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-12 20:24:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-12 20:24:52 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-12 20:24:52 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-12 20:24:52 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-12 20:24:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-12 20:24:52 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-12 20:24:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 20:24:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 20:24:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 20:24:52 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-12 20:24:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 20:24:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 20:24:52 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-12 20:24:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 20:24:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 20:24:52 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-12 20:24:52 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-12 20:24:52 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-12 20:24:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-12 20:24:52 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-12 20:24:52 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-12 20:24:52 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-12 20:24:52 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-12 20:24:52 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-12 20:24:52 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-12 20:24:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-12 20:24:52 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-12 20:24:52 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-12 20:24:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-12 20:24:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:24:52 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-12 20:24:52 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-12 20:24:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-12 20:24:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:24:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:24:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:52 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-12 20:24:52 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-12 20:24:52 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-12 20:24:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-12 20:24:52 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-12 20:24:52 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-12 20:24:52 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-12 20:24:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:24:52 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-12 20:24:52 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-12 20:24:52 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-12 20:24:52 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-12 20:24:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-12 20:24:52 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-12 20:24:53 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-12 20:24:53 START begin_task: Starting task 'selecting calibration port' 2008-Oct-12 20:24:53 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-12 20:24:53 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-12 20:24:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-12 20:24:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:24:53 START begin_task: Starting task 'waiting on calport' 2008-Oct-12 20:24:53 LOG5 begin_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-12 20:24:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:53 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-12 20:24:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:24:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:53 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 20:24:53 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-12 20:24:53 LOG5 end_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-12 20:24:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-12 20:24:53 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-12 20:24:53 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-12 20:24:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 20:24:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 20:24:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 20:24:53 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-12 20:24:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 20:24:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 20:24:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 20:24:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 20:24:53 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-12 20:24:53 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-12 20:24:53 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-12 20:24:53 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-12 20:24:53 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-12 20:24:53 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-12 20:24:53 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-12 20:24:53 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-12 20:24:53 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-12 20:24:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:24:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:24:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:24:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:24:53 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-12 20:24:53 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-12 20:24:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 20:24:53 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-12 20:24:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 20:24:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 20:24:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 20:24:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 20:24:53 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-12 20:24:53 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-12 20:24:53 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-12 20:24:53 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-12 20:24:53 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-12 20:24:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:24:53 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-12 20:24:53 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-12 20:24:54 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-12 20:24:54 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-12 20:24:54 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-12 20:24:54 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-12 20:24:54 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-12 20:24:54 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-12 20:24:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-12 20:24:54 LOG3 track_source: Calling 'track_source galfasrc 212600.0 +091448 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-12 20:24:54 START begin_task: Starting task 'sending tracking commands' 2008-Oct-12 20:24:54 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-12 20:24:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-12 20:24:54 INFO1 track_source: Starting to track galfasrc 2008-Oct-12 20:24:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-12 20:24:54 LOG3 vw_send: To DATATAKING: set ra 212600.0 2008-Oct-12 20:24:54 LOG3 vw_send: To DATATAKING: set dec +091448 2008-Oct-12 20:24:54 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-12 20:24:54 LOG3 vw_send: To DATATAKING: pnt tr 212600.0 +091448 -CJ 2008-Oct-12 20:24:54 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-12 20:24:54 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-12 20:24:54 LOG5 finish_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-12 20:24:54 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-12 20:24:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:24:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-12 20:24:54 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-12 20:24:54 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-12 20:24:54 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-12 20:24:54 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-12 20:24:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:24:54 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-12 20:24:54 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-12 20:24:54 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-12 20:24:54 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-12 20:24:54 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-12 20:24:54 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-12 20:24:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-12 20:24:54 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-12 20:24:54 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-12 20:24:54 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-12 20:24:54 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-12 20:24:54 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-12 20:24:54 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-12 20:24:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-12 20:24:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-12 20:24:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-12 20:24:54 LOG4 got_cormsg: From DATATAKING: set ra 212600.0 2008-Oct-12 20:24:54 LOG4 got_cormsg: From DATATAKING: set dec +091448 2008-Oct-12 20:24:54 LOG4 got_cormsg: From DATATAKING: vw% 212600.0 2008-Oct-12 20:24:54 LOG4 got_cormsg: From DATATAKING: vw% +091448 2008-Oct-12 20:24:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-12 20:24:54 LOG4 got_cormsg: From DATATAKING: pnt tr 212600.0 +091448 -CJ 2008-Oct-12 20:24:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-12 20:24:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-12 20:24:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:24:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 20:24:55 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-12 20:24:55 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-12 20:24:55 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-12 20:24:55 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-12 20:24:55 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-12 20:24:55 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-12 20:24:55 LOG5 finish_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-12 20:24:55 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-12 20:24:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:24:55 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-12 20:24:55 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-12 20:24:55 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-12 20:24:55 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-12 20:24:55 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-12 20:24:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-12 20:24:55 LOG3 waittrk: Start waittrk 5 2008-Oct-12 20:24:55 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-12 20:24:55 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-12 20:25:00 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-12 20:25:00 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-12 20:25:00 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-12 20:25:00 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-12 20:25:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-12 20:25:13 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-12 20:25:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-12 20:25:13 INFO2 waittrk: Now tracking galfasrc 2008-Oct-12 20:25:13 LOG4 waittrk: Current telescope position: Az = 358.86 ZA = 9.03 2008-Oct-12 20:25:13 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-12 20:25:13 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-12 20:25:13 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-12 20:25:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:25:13 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-12 20:25:13 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-12 20:25:13 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-12 20:25:13 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-12 20:25:13 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-12 20:25:13 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-12 20:25:13 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-12 20:25:13 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-12 20:25:13 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-12 20:25:13 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-12 20:25:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-12 20:25:13 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 20:25:13 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-12 20:25:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 20:25:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 20:25:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:25:13 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 20:25:13 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-12 20:25:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 20:25:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:25:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:25:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 20:25:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 20:25:14 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-12 20:25:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 20:25:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 20:25:14 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 20:25:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 20:25:14 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-12 20:25:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:25:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 20:25:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 20:25:14 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-12 20:25:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 20:25:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 20:25:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 20:25:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 20:25:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 20:25:14 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-12 20:25:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 20:25:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 20:25:14 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-12 20:25:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 20:25:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 20:25:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 20:25:14 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-12 20:25:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:25:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:25:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:25:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:25:14 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081012.a2010.0000.fits' is empty! 2008-Oct-12 20:25:14 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-12 20:25:14 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-12 20:25:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 20:25:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 20:25:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 20:25:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 20:25:14 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-12 20:25:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 20:25:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 20:25:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 20:25:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 20:25:14 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-12 20:25:14 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-12 20:25:14 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-12 20:25:14 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-12 20:25:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-12 20:25:14 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-12 20:25:14 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-12 20:25:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-12 20:25:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:25:14 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-12 20:25:14 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-12 20:25:14 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-12 20:25:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:25:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 20:25:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:25:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 20:25:18 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-12 20:25:18 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-12 20:25:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-12 20:25:18 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-12 20:25:18 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-12 20:25:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-12 20:25:18 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-12 20:25:18 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-12 20:25:18 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-12 20:25:18 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-12 20:25:18 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-12 20:25:18 LOG5 begin_task: Level: (5) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-12 20:25:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-12 20:25:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:25:18 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-12 20:25:18 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 5 dB 2008-Oct-12 20:25:18 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2008-Oct-12 20:25:18 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 2 3 dB 2008-Oct-12 20:25:18 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-12 20:25:18 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-12 20:25:18 LOG5 end_task: Level: (5) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-12 20:25:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.109 0.984 ALFA beam 1: 0.938 0.934 2008-Oct-12 20:25:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.056 1.016 ALFA beam 3: 0.904 0.889 2008-Oct-12 20:25:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.876 1.094 ALFA beam 5: 0.945 0.903 2008-Oct-12 20:25:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.997 0.992 ALFA beam 7: 0.880 0.883 2008-Oct-12 20:25:18 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-12 20:25:18 LOG5 finish_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-12 20:25:18 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-12 20:25:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:25:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-12 20:25:19 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-12 20:25:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 20:25:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-12 20:25:19 LOG5 finish_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-12 20:25:19 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-12 20:25:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:25:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-12 20:25:19 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-12 20:25:19 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-12 20:25:19 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-12 20:25:19 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-12 20:25:19 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:25:19 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78535 J 2008-Oct-12 20:25:19 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:25:19 LOG2 antvel: Parameters to Doppler: Topocentric 87918 2008 286 0.0 2008-Oct-12 20:25:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:25:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-12 20:25:19 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-12 20:25:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:25:19 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:25:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-12 20:25:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:25:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:25:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:25:19 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-12 20:25:19 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.434122 2008.7853549699596 18.999933 2008-Oct-12 20:25:19 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333088 9.246666666666677 2008-Oct-12 20:25:19 LOG4 log_alfabeam: ALFABEAM 1 21.432101069502149 9.351221860486946 2008-Oct-12 20:25:19 LOG4 log_alfabeam: ALFABEAM 2 21.427495104297542 9.280968618326296 2008-Oct-12 20:25:19 LOG4 log_alfabeam: ALFABEAM 3 21.428684212304034 9.176282378599096 2008-Oct-12 20:25:19 LOG4 log_alfabeam: ALFABEAM 4 21.434591809090961 9.142147570213464 2008-Oct-12 20:25:19 LOG4 log_alfabeam: ALFABEAM 5 21.439214236992868 9.213166241266116 2008-Oct-12 20:25:19 LOG4 log_alfabeam: ALFABEAM 6 21.437912669451734 9.317547943000365 2008-Oct-12 20:25:19 INFO2 take_data: Starting WAPP+GALFA scan: 828600168 2008-Oct-12 20:25:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:25:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:25:19 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-12 20:25:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:25:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-12 20:25:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:25:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:25:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:25:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1520.00 2008-Oct-12 20:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:25:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-12 20:25:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:25:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:25:30 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-12 20:25:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:25:30 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-12 20:25:30 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-12 20:25:30 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-12 20:25:30 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-12 20:25:30 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:25:30 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:25:30 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:25:30 LOG2 antvel: Parameters to Doppler: Topocentric 87930 2008 286 0.0 2008-Oct-12 20:25:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:25:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-12 20:25:30 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-12 20:25:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:25:30 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:25:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-12 20:25:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:25:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:25:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:25:30 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-12 20:25:30 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.437465 2008.7853553502166 18.999933 2008-Oct-12 20:25:30 LOG4 log_alfabeam: ALFABEAM 0 21.433333333332978 9.246666666666663 2008-Oct-12 20:25:30 LOG4 log_alfabeam: ALFABEAM 1 21.432138313564838 9.351316548802352 2008-Oct-12 20:25:30 LOG4 log_alfabeam: ALFABEAM 2 21.427507393164010 9.281423650622569 2008-Oct-12 20:25:30 LOG4 log_alfabeam: ALFABEAM 3 21.428659225338354 9.176646085553243 2008-Oct-12 20:25:30 LOG4 log_alfabeam: ALFABEAM 4 21.434554600417247 9.142050836964360 2008-Oct-12 20:25:30 LOG4 log_alfabeam: ALFABEAM 5 21.439202229410586 9.212707902411427 2008-Oct-12 20:25:30 LOG4 log_alfabeam: ALFABEAM 6 21.437937836636667 9.317189694739611 2008-Oct-12 20:25:30 INFO2 take_data: Starting WAPP+GALFA scan: 828600169 2008-Oct-12 20:25:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:25:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:25:31 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-12 20:25:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:25:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-12 20:25:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:25:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:25:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:25:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1532.00 2008-Oct-12 20:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:25:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:25:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:25:42 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-12 20:25:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:25:42 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-12 20:25:42 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-12 20:25:42 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-12 20:25:42 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-12 20:25:42 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:25:42 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:25:42 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:25:42 LOG2 antvel: Parameters to Doppler: Topocentric 87942 2008 286 0.0 2008-Oct-12 20:25:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:25:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-12 20:25:42 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-12 20:25:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:25:42 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:25:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-12 20:25:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:25:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:25:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:25:42 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-12 20:25:42 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.440807 2008.7853557304738 18.999933 2008-Oct-12 20:25:42 LOG4 log_alfabeam: ALFABEAM 0 21.433333333341363 9.246666666666604 2008-Oct-12 20:25:42 LOG4 log_alfabeam: ALFABEAM 1 21.432175581282003 9.351408307340771 2008-Oct-12 20:25:42 LOG4 log_alfabeam: ALFABEAM 2 21.427519840144917 9.281877594400271 2008-Oct-12 20:25:42 LOG4 log_alfabeam: ALFABEAM 3 21.428634375238740 9.177011639149235 2008-Oct-12 20:25:42 LOG4 log_alfabeam: ALFABEAM 4 21.434517366628469 9.141957030214037 2008-Oct-12 20:25:42 LOG4 log_alfabeam: ALFABEAM 5 21.439190061277955 9.212250606997776 2008-Oct-12 20:25:42 LOG4 log_alfabeam: ALFABEAM 6 21.437962870790098 9.316829569358552 2008-Oct-12 20:25:42 INFO2 take_data: Starting WAPP+GALFA scan: 828600170 2008-Oct-12 20:25:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:25:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:25:43 LOG5 begin_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-12 20:25:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:25:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-12 20:25:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:25:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:25:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:25:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1544.00 2008-Oct-12 20:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:25:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:25:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:25:54 LOG5 end_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-12 20:25:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:25:54 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-12 20:25:54 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-12 20:25:54 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-12 20:25:54 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-12 20:25:54 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:25:54 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:25:54 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:25:54 LOG2 antvel: Parameters to Doppler: Topocentric 87954 2008 286 0.0 2008-Oct-12 20:25:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:25:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-12 20:25:54 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-12 20:25:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:25:54 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:25:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-12 20:25:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:25:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:25:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:25:54 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-12 20:25:54 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.444150 2008.7853561107308 18.999933 2008-Oct-12 20:25:54 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333785 9.246666666666663 2008-Oct-12 20:25:54 LOG4 log_alfabeam: ALFABEAM 1 21.432212891732764 9.351497182974972 2008-Oct-12 20:25:54 LOG4 log_alfabeam: ALFABEAM 2 21.427532451605629 9.282330682214688 2008-Oct-12 20:25:54 LOG4 log_alfabeam: ALFABEAM 3 21.428609649274797 9.177379226498831 2008-Oct-12 20:25:54 LOG4 log_alfabeam: ALFABEAM 4 21.434480088644996 9.141866102220517 2008-Oct-12 20:25:54 LOG4 log_alfabeam: ALFABEAM 5 21.439177726331483 9.211794121044630 2008-Oct-12 20:25:54 LOG4 log_alfabeam: ALFABEAM 6 21.437987784705943 9.316467382046419 2008-Oct-12 20:25:54 INFO2 take_data: Starting WAPP+GALFA scan: 828600171 2008-Oct-12 20:25:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:25:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:25:55 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-12 20:25:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:25:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-12 20:25:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:25:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:25:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:25:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1556.00 2008-Oct-12 20:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:26:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:26:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:26:06 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-12 20:26:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:26:06 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-12 20:26:06 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-12 20:26:06 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-12 20:26:06 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-12 20:26:06 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:26:06 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:26:06 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:26:06 LOG2 antvel: Parameters to Doppler: Topocentric 87966 2008 286 0.0 2008-Oct-12 20:26:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:26:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-12 20:26:06 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-12 20:26:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:26:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:26:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-12 20:26:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:26:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:26:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:26:06 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-12 20:26:06 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.447492 2008.7853564909879 18.999933 2008-Oct-12 20:26:06 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333856 9.246666666666659 2008-Oct-12 20:26:06 LOG4 log_alfabeam: ALFABEAM 1 21.432250219380567 9.351583115258853 2008-Oct-12 20:26:06 LOG4 log_alfabeam: ALFABEAM 2 21.427545218895219 9.282782604169649 2008-Oct-12 20:26:06 LOG4 log_alfabeam: ALFABEAM 3 21.428585064359535 9.177748595544386 2008-Oct-12 20:26:06 LOG4 log_alfabeam: ALFABEAM 4 21.434442791993344 9.141778115015134 2008-Oct-12 20:26:06 LOG4 log_alfabeam: ALFABEAM 5 21.439165233029531 9.211338757076970 2008-Oct-12 20:26:06 LOG4 log_alfabeam: ALFABEAM 6 21.438012561346330 9.316103380693249 2008-Oct-12 20:26:06 INFO2 take_data: Starting WAPP+GALFA scan: 828600172 2008-Oct-12 20:26:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:26:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:26:07 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-12 20:26:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:26:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-12 20:26:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:26:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1568.00 2008-Oct-12 20:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:26:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:26:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:26:18 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-12 20:26:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:26:18 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-12 20:26:18 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-12 20:26:18 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-12 20:26:18 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-12 20:26:18 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:26:18 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:26:18 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:26:18 LOG2 antvel: Parameters to Doppler: Topocentric 87978 2008 286 0.0 2008-Oct-12 20:26:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:26:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-12 20:26:18 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-12 20:26:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:26:18 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:26:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-12 20:26:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:26:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:26:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:26:18 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-12 20:26:18 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.450835 2008.7853568712449 18.999933 2008-Oct-12 20:26:18 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333657 9.246666666666670 2008-Oct-12 20:26:18 LOG4 log_alfabeam: ALFABEAM 1 21.432287583330311 9.351666149106197 2008-Oct-12 20:26:18 LOG4 log_alfabeam: ALFABEAM 2 21.427558148491908 9.283233592150921 2008-Oct-12 20:26:18 LOG4 log_alfabeam: ALFABEAM 3 21.428560607852191 9.178119934690285 2008-Oct-12 20:26:18 LOG4 log_alfabeam: ALFABEAM 4 21.434405457578006 9.141693022813218 2008-Oct-12 20:26:18 LOG4 log_alfabeam: ALFABEAM 5 21.439152574996893 9.210884281760958 2008-Oct-12 20:26:18 LOG4 log_alfabeam: ALFABEAM 6 21.438037213420994 9.315737379180822 2008-Oct-12 20:26:18 INFO2 take_data: Starting WAPP+GALFA scan: 828600173 2008-Oct-12 20:26:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:26:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:26:19 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-12 20:26:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:26:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-12 20:26:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:26:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:26:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:26:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1580.00 2008-Oct-12 20:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:26:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:26:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:26:30 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-12 20:26:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:26:30 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-12 20:26:30 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-12 20:26:30 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-12 20:26:30 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-12 20:26:30 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:26:30 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:26:30 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:26:30 LOG2 antvel: Parameters to Doppler: Topocentric 87990 2008 286 0.0 2008-Oct-12 20:26:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:26:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-12 20:26:30 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-12 20:26:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:26:30 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:26:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-12 20:26:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:26:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:26:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:26:30 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-12 20:26:30 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.454177 2008.7853572515021 18.999933 2008-Oct-12 20:26:30 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333390 9.246666666666663 2008-Oct-12 20:26:30 LOG4 log_alfabeam: ALFABEAM 1 21.432324957993035 9.351746229098655 2008-Oct-12 20:26:30 LOG4 log_alfabeam: ALFABEAM 2 21.427571231461119 9.283683338093724 2008-Oct-12 20:26:30 LOG4 log_alfabeam: ALFABEAM 3 21.428536296423200 9.178492988673725 2008-Oct-12 20:26:30 LOG4 log_alfabeam: ALFABEAM 4 21.434368110965096 9.141610882623754 2008-Oct-12 20:26:30 LOG4 log_alfabeam: ALFABEAM 5 21.439139760967429 9.210431005873783 2008-Oct-12 20:26:30 LOG4 log_alfabeam: ALFABEAM 6 21.438061724111073 9.315369628663845 2008-Oct-12 20:26:30 INFO2 take_data: Starting WAPP+GALFA scan: 828600174 2008-Oct-12 20:26:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:26:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:26:31 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-12 20:26:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:26:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-12 20:26:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:26:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:26:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:26:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1592.00 2008-Oct-12 20:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:26:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:26:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:26:42 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-12 20:26:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:26:42 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-12 20:26:42 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-12 20:26:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 20:26:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 20:26:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 20:26:42 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-12 20:26:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 20:26:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 20:26:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 20:26:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 20:26:42 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-12 20:26:42 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-12 20:26:42 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-12 20:26:42 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-12 20:26:42 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:26:42 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:26:42 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:26:42 LOG2 antvel: Parameters to Doppler: Topocentric 88002 2008 286 0.0 2008-Oct-12 20:26:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:26:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-12 20:26:42 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-12 20:26:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:26:42 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:26:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-12 20:26:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:26:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:26:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:26:42 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-12 20:26:42 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.457519 2008.7853576317591 18.999933 2008-Oct-12 20:26:42 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333451 9.246666666666666 2008-Oct-12 20:26:42 LOG4 log_alfabeam: ALFABEAM 1 21.432362351305422 9.351823375540585 2008-Oct-12 20:26:42 LOG4 log_alfabeam: ALFABEAM 2 21.427584470408885 9.284131939131555 2008-Oct-12 20:26:42 LOG4 log_alfabeam: ALFABEAM 3 21.428512124738319 9.178867834743846 2008-Oct-12 20:26:42 LOG4 log_alfabeam: ALFABEAM 4 21.434330744225495 9.141531673886986 2008-Oct-12 20:26:42 LOG4 log_alfabeam: ALFABEAM 5 21.439126788369467 9.209978831886211 2008-Oct-12 20:26:42 LOG4 log_alfabeam: ALFABEAM 6 21.438086098771073 9.315000052592181 2008-Oct-12 20:26:42 INFO2 take_data: Starting WAPP+GALFA scan: 828600175 2008-Oct-12 20:26:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:26:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:26:43 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-12 20:26:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:26:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-12 20:26:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:26:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:26:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:26:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1604.00 2008-Oct-12 20:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:26:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:26:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:26:54 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-12 20:26:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:26:54 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-12 20:26:54 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-12 20:26:54 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-12 20:26:54 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-12 20:26:54 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:26:54 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:26:54 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:26:54 LOG2 antvel: Parameters to Doppler: Topocentric 88014 2008 286 0.0 2008-Oct-12 20:26:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:26:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-12 20:26:54 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-12 20:26:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:26:54 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:26:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-12 20:26:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:26:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:26:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:26:54 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-12 20:26:54 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.460862 2008.7853580120161 18.999933 2008-Oct-12 20:26:54 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333415 9.246666666666664 2008-Oct-12 20:26:54 LOG4 log_alfabeam: ALFABEAM 1 21.432399771220453 9.351897605995841 2008-Oct-12 20:26:54 LOG4 log_alfabeam: ALFABEAM 2 21.427597868086192 9.284579491355128 2008-Oct-12 20:26:54 LOG4 log_alfabeam: ALFABEAM 3 21.428488087590701 9.179244551850958 2008-Oct-12 20:26:54 LOG4 log_alfabeam: ALFABEAM 4 21.434293349407671 9.141455378781499 2008-Oct-12 20:26:54 LOG4 log_alfabeam: ALFABEAM 5 21.439113654485084 9.209527663274420 2008-Oct-12 20:26:54 LOG4 log_alfabeam: ALFABEAM 6 21.438110342631376 9.314628572686836 2008-Oct-12 20:26:54 INFO2 take_data: Starting WAPP+GALFA scan: 828600176 2008-Oct-12 20:26:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:26:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:26:55 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-12 20:26:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:26:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-12 20:26:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:26:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:26:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:26:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1616.00 2008-Oct-12 20:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:27:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:27:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:27:06 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-12 20:27:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:27:06 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-12 20:27:06 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-12 20:27:06 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-12 20:27:06 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-12 20:27:06 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:27:06 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:27:06 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:27:06 LOG2 antvel: Parameters to Doppler: Topocentric 88026 2008 286 0.0 2008-Oct-12 20:27:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:27:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-12 20:27:06 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-12 20:27:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:27:06 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:27:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-12 20:27:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:27:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:27:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:27:06 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-12 20:27:06 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.464204 2008.7853583922731 18.999933 2008-Oct-12 20:27:06 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333501 9.246666666666668 2008-Oct-12 20:27:06 LOG4 log_alfabeam: ALFABEAM 1 21.432437192109180 9.351968872624267 2008-Oct-12 20:27:06 LOG4 log_alfabeam: ALFABEAM 2 21.427611415159561 9.285025689737017 2008-Oct-12 20:27:06 LOG4 log_alfabeam: ALFABEAM 3 21.428464201286129 9.179622880183505 2008-Oct-12 20:27:06 LOG4 log_alfabeam: ALFABEAM 4 21.434255952123575 9.141382046743079 2008-Oct-12 20:27:06 LOG4 log_alfabeam: ALFABEAM 5 21.439100368447324 9.209077807898282 2008-Oct-12 20:27:06 LOG4 log_alfabeam: ALFABEAM 6 21.438134439223500 9.314255444748632 2008-Oct-12 20:27:06 INFO2 take_data: Starting WAPP+GALFA scan: 828600177 2008-Oct-12 20:27:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:27:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:27:07 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-12 20:27:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:27:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-12 20:27:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:27:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:27:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:27:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1628.00 2008-Oct-12 20:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:27:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:27:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:27:18 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-12 20:27:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:27:18 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-12 20:27:18 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-12 20:27:18 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-12 20:27:18 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-12 20:27:18 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:27:18 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:27:18 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:27:18 LOG2 antvel: Parameters to Doppler: Topocentric 88038 2008 286 0.0 2008-Oct-12 20:27:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:27:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-12 20:27:18 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-12 20:27:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:27:18 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:27:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-12 20:27:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:27:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:27:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:27:18 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-12 20:27:18 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.467547 2008.7853587725301 18.999933 2008-Oct-12 20:27:18 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333383 9.246666666666664 2008-Oct-12 20:27:18 LOG4 log_alfabeam: ALFABEAM 1 21.432474633121910 9.352037215414974 2008-Oct-12 20:27:18 LOG4 log_alfabeam: ALFABEAM 2 21.427625118378774 9.285470764373407 2008-Oct-12 20:27:18 LOG4 log_alfabeam: ALFABEAM 3 21.428440453415249 9.180003011288107 2008-Oct-12 20:27:18 LOG4 log_alfabeam: ALFABEAM 4 21.434218533234326 9.141311636907254 2008-Oct-12 20:27:18 LOG4 log_alfabeam: ALFABEAM 5 21.439086923619900 9.208629034155718 2008-Oct-12 20:27:18 LOG4 log_alfabeam: ALFABEAM 6 21.438158401041409 9.313880479478639 2008-Oct-12 20:27:18 INFO2 take_data: Starting WAPP+GALFA scan: 828600178 2008-Oct-12 20:27:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:27:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:27:19 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-12 20:27:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:27:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-12 20:27:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:27:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:27:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:27:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1640.00 2008-Oct-12 20:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:27:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:27:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:27:30 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-12 20:27:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:27:30 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-12 20:27:30 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-12 20:27:30 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-12 20:27:30 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-12 20:27:30 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:27:30 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:27:30 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:27:30 LOG2 antvel: Parameters to Doppler: Topocentric 88050 2008 286 0.0 2008-Oct-12 20:27:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:27:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-12 20:27:30 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-12 20:27:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:27:30 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:27:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-12 20:27:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:27:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:27:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:27:30 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-12 20:27:30 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.470889 2008.7853591527874 18.999933 2008-Oct-12 20:27:30 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333344 9.246666666666664 2008-Oct-12 20:27:30 LOG4 log_alfabeam: ALFABEAM 1 21.432512068618333 9.352102591593198 2008-Oct-12 20:27:30 LOG4 log_alfabeam: ALFABEAM 2 21.427638968150884 9.285914412451460 2008-Oct-12 20:27:30 LOG4 log_alfabeam: ALFABEAM 3 21.428416860030595 9.180384682500600 2008-Oct-12 20:27:30 LOG4 log_alfabeam: ALFABEAM 4 21.434181118365853 9.141244193645676 2008-Oct-12 20:27:30 LOG4 log_alfabeam: ALFABEAM 5 21.439073329400188 9.208181647768004 2008-Oct-12 20:27:30 LOG4 log_alfabeam: ALFABEAM 6 21.438182211863491 9.313503935600268 2008-Oct-12 20:27:30 INFO2 take_data: Starting WAPP+GALFA scan: 828600179 2008-Oct-12 20:27:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:27:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:27:31 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-12 20:27:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:27:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-12 20:27:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:27:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:27:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:27:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1652.00 2008-Oct-12 20:27:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:27:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:27:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:27:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:27:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:27:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:27:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:27:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:27:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:27:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:27:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:27:42 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-12 20:27:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:27:42 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-12 20:27:42 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-12 20:27:42 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-12 20:27:42 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-12 20:27:42 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:27:42 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:27:42 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:27:42 LOG2 antvel: Parameters to Doppler: Topocentric 88062 2008 286 0.0 2008-Oct-12 20:27:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:27:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-12 20:27:42 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-12 20:27:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:27:42 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:27:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-12 20:27:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:27:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:27:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:27:42 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-12 20:27:42 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.474232 2008.7853595330444 18.999933 2008-Oct-12 20:27:42 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333355 9.246666666666661 2008-Oct-12 20:27:42 LOG4 log_alfabeam: ALFABEAM 1 21.432549517762219 9.352165039165195 2008-Oct-12 20:27:42 LOG4 log_alfabeam: ALFABEAM 2 21.427652971331412 9.286356863303775 2008-Oct-12 20:27:42 LOG4 log_alfabeam: ALFABEAM 3 21.428393408816873 9.180768086589580 2008-Oct-12 20:27:42 LOG4 log_alfabeam: ALFABEAM 4 21.434143688364976 9.141179678074916 2008-Oct-12 20:27:42 LOG4 log_alfabeam: ALFABEAM 5 21.439059579044986 9.207735417873549 2008-Oct-12 20:27:42 LOG4 log_alfabeam: ALFABEAM 6 21.438205884091953 9.313125622576992 2008-Oct-12 20:27:42 INFO2 take_data: Starting WAPP+GALFA scan: 828600180 2008-Oct-12 20:27:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:27:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:27:43 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-12 20:27:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:27:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-12 20:27:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:27:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:27:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:27:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1664.00 2008-Oct-12 20:27:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:27:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:27:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:27:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:27:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:27:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:27:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:27:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:27:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:27:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:27:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:27:54 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-12 20:27:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:27:54 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-12 20:27:54 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-12 20:27:54 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-12 20:27:54 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-12 20:27:54 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:27:54 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:27:54 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:27:54 LOG2 antvel: Parameters to Doppler: Topocentric 88074 2008 286 0.0 2008-Oct-12 20:27:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:27:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-12 20:27:54 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-12 20:27:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:27:54 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:27:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-12 20:27:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:27:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:27:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:27:54 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-12 20:27:54 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.477574 2008.7853599133014 18.999933 2008-Oct-12 20:27:54 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333518 9.246666666666670 2008-Oct-12 20:27:54 LOG4 log_alfabeam: ALFABEAM 1 21.432586954915674 9.352224520422554 2008-Oct-12 20:27:54 LOG4 log_alfabeam: ALFABEAM 2 21.427667118074130 9.286797816478995 2008-Oct-12 20:27:54 LOG4 log_alfabeam: ALFABEAM 3 21.428370115566107 9.181152958187008 2008-Oct-12 20:27:54 LOG4 log_alfabeam: ALFABEAM 4 21.434106268857530 9.141118129499844 2008-Oct-12 20:27:54 LOG4 log_alfabeam: ALFABEAM 5 21.439045682209908 9.207290647904633 2008-Oct-12 20:27:54 LOG4 log_alfabeam: ALFABEAM 6 21.438229401758726 9.312745801909836 2008-Oct-12 20:27:54 INFO2 take_data: Starting WAPP+GALFA scan: 828600181 2008-Oct-12 20:27:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:27:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:27:55 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-12 20:27:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:27:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-12 20:27:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:27:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:27:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:27:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1676.00 2008-Oct-12 20:27:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:27:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:27:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:27:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:27:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:27:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:27:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:27:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:27:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:28:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:28:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:28:06 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-12 20:28:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:28:06 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-12 20:28:06 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Oct-12 20:28:06 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-12 20:28:06 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 20:28:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 20:28:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 20:28:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 20:28:06 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-12 20:28:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 20:28:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 20:28:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 20:28:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 20:28:06 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-12 20:28:06 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-12 20:28:06 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-12 20:28:06 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-12 20:28:06 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-12 20:28:06 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:28:06 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:28:06 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:28:06 LOG2 antvel: Parameters to Doppler: Topocentric 88086 2008 286 0.0 2008-Oct-12 20:28:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:28:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-12 20:28:06 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-12 20:28:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:28:06 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:28:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-12 20:28:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:28:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:28:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:28:06 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-12 20:28:06 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.480917 2008.7853602935584 18.999933 2008-Oct-12 20:28:06 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333422 9.246666666666670 2008-Oct-12 20:28:06 LOG4 log_alfabeam: ALFABEAM 1 21.432624399253648 9.352281071380292 2008-Oct-12 20:28:06 LOG4 log_alfabeam: ALFABEAM 2 21.427681415340142 9.287237500517859 2008-Oct-12 20:28:06 LOG4 log_alfabeam: ALFABEAM 3 21.428346968058364 9.181539491263635 2008-Oct-12 20:28:06 LOG4 log_alfabeam: ALFABEAM 4 21.434068840678492 9.141059511026626 2008-Oct-12 20:28:06 LOG4 log_alfabeam: ALFABEAM 5 21.439031632045264 9.206847107768427 2008-Oct-12 20:28:06 LOG4 log_alfabeam: ALFABEAM 6 21.438252777172362 9.312364281844307 2008-Oct-12 20:28:06 INFO2 take_data: Starting WAPP+GALFA scan: 828600182 2008-Oct-12 20:28:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:28:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:28:07 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-12 20:28:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:28:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-12 20:28:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:28:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:28:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:28:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1688.00 2008-Oct-12 20:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:28:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:28:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:28:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:28:18 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-12 20:28:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:28:18 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-12 20:28:18 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-12 20:28:18 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-12 20:28:18 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-12 20:28:18 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:28:18 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:28:18 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:28:18 LOG2 antvel: Parameters to Doppler: Topocentric 88098 2008 286 0.0 2008-Oct-12 20:28:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:28:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-12 20:28:18 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-12 20:28:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:28:18 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:28:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-12 20:28:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:28:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:28:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:28:18 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-12 20:28:18 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.484259 2008.7853606738154 18.999826 2008-Oct-12 20:28:18 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333341 9.246666666666670 2008-Oct-12 20:28:18 LOG4 log_alfabeam: ALFABEAM 1 21.432661813807599 9.352334633271340 2008-Oct-12 20:28:18 LOG4 log_alfabeam: ALFABEAM 2 21.427695848309231 9.287675434050469 2008-Oct-12 20:28:18 LOG4 log_alfabeam: ALFABEAM 3 21.428323988638688 9.181927259354227 2008-Oct-12 20:28:18 LOG4 log_alfabeam: ALFABEAM 4 21.434031441031721 9.141003883387356 2008-Oct-12 20:28:18 LOG4 log_alfabeam: ALFABEAM 5 21.439017442985161 9.206405283114421 2008-Oct-12 20:28:18 LOG4 log_alfabeam: ALFABEAM 6 21.438275987762424 9.311981483455563 2008-Oct-12 20:28:18 INFO2 take_data: Starting WAPP+GALFA scan: 828600183 2008-Oct-12 20:28:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:28:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:28:19 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-12 20:28:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:28:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-12 20:28:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:28:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:28:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:28:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1700.00 2008-Oct-12 20:28:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:28:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:28:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:28:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:28:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:28:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:28:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:28:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:28:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:28:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:28:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:28:30 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-12 20:28:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:28:30 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-12 20:28:30 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-12 20:28:30 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-12 20:28:30 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-12 20:28:30 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:28:30 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:28:30 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:28:30 LOG2 antvel: Parameters to Doppler: Topocentric 88110 2008 286 0.0 2008-Oct-12 20:28:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:28:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-12 20:28:30 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-12 20:28:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:28:30 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:28:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-12 20:28:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:28:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:28:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:28:30 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-12 20:28:30 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.487602 2008.7853610540726 18.999933 2008-Oct-12 20:28:30 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333341 9.246666666666664 2008-Oct-12 20:28:30 LOG4 log_alfabeam: ALFABEAM 1 21.432699251801107 9.352385318463527 2008-Oct-12 20:28:30 LOG4 log_alfabeam: ALFABEAM 2 21.427710438228978 9.288112395064260 2008-Oct-12 20:28:30 LOG4 log_alfabeam: ALFABEAM 3 21.428301144724202 9.182316933248710 2008-Oct-12 20:28:30 LOG4 log_alfabeam: ALFABEAM 4 21.433994015969855 9.140951132221357 2008-Oct-12 20:28:30 LOG4 log_alfabeam: ALFABEAM 5 21.439003094495416 9.205964390691024 2008-Oct-12 20:28:30 LOG4 log_alfabeam: ALFABEAM 6 21.438299066332434 9.311596742955341 2008-Oct-12 20:28:30 INFO2 take_data: Starting WAPP+GALFA scan: 828600184 2008-Oct-12 20:28:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:28:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:28:31 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-12 20:28:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:28:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-12 20:28:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:28:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:28:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:28:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1712.00 2008-Oct-12 20:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:28:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:28:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:28:42 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-12 20:28:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:28:42 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-12 20:28:42 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-12 20:28:42 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-12 20:28:42 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-12 20:28:42 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:28:42 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:28:42 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:28:42 LOG2 antvel: Parameters to Doppler: Topocentric 88122 2008 286 0.0 2008-Oct-12 20:28:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:28:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-12 20:28:42 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-12 20:28:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:28:42 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:28:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-12 20:28:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:28:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:28:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:28:42 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-12 20:28:42 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.490944 2008.7853614343296 18.999933 2008-Oct-12 20:28:42 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333415 9.246666666666668 2008-Oct-12 20:28:42 LOG4 log_alfabeam: ALFABEAM 1 21.432736653601445 9.352433020998362 2008-Oct-12 20:28:42 LOG4 log_alfabeam: ALFABEAM 2 21.427725160584711 9.288547537985956 2008-Oct-12 20:28:42 LOG4 log_alfabeam: ALFABEAM 3 21.428278472026754 9.182707766994621 2008-Oct-12 20:28:42 LOG4 log_alfabeam: ALFABEAM 4 21.433956625852190 9.140901366189944 2008-Oct-12 20:28:42 LOG4 log_alfabeam: ALFABEAM 5 21.438988610308055 9.205525282875771 2008-Oct-12 20:28:42 LOG4 log_alfabeam: ALFABEAM 6 21.438321976852645 9.311210797786023 2008-Oct-12 20:28:42 INFO2 take_data: Starting WAPP+GALFA scan: 828600185 2008-Oct-12 20:28:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:28:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:28:43 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-12 20:28:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:28:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-12 20:28:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:28:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:28:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:28:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1724.00 2008-Oct-12 20:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:28:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:28:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:28:54 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-12 20:28:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:28:54 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-12 20:28:54 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-12 20:28:54 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-12 20:28:54 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-12 20:28:54 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:28:54 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:28:54 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:28:54 LOG2 antvel: Parameters to Doppler: Topocentric 88134 2008 286 0.0 2008-Oct-12 20:28:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:28:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-12 20:28:54 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-12 20:28:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:28:54 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:28:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-12 20:28:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:28:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:28:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:28:54 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-12 20:28:54 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.494287 2008.7853618145866 18.999933 2008-Oct-12 20:28:54 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333415 9.246666666666668 2008-Oct-12 20:28:54 LOG4 log_alfabeam: ALFABEAM 1 21.432774049745838 9.352477798998079 2008-Oct-12 20:28:54 LOG4 log_alfabeam: ALFABEAM 2 21.427740027273963 9.288981273107265 2008-Oct-12 20:28:54 LOG4 log_alfabeam: ALFABEAM 3 21.428255951702457 9.183100115452625 2008-Oct-12 20:28:54 LOG4 log_alfabeam: ALFABEAM 4 21.433919239905954 9.140854525918209 2008-Oct-12 20:28:54 LOG4 log_alfabeam: ALFABEAM 5 21.438973978835573 9.205087546548743 2008-Oct-12 20:28:54 LOG4 log_alfabeam: ALFABEAM 6 21.438344738302948 9.310823296871162 2008-Oct-12 20:28:54 INFO2 take_data: Starting WAPP+GALFA scan: 828600186 2008-Oct-12 20:28:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:28:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:28:55 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-12 20:28:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:28:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-12 20:28:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:28:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:28:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:28:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1736.00 2008-Oct-12 20:28:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:28:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:28:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:28:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:28:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:28:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:28:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:28:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:28:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:29:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:29:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:29:06 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-12 20:29:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:29:06 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-12 20:29:06 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-12 20:29:06 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-12 20:29:06 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-12 20:29:06 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:29:06 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:29:06 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:29:06 LOG2 antvel: Parameters to Doppler: Topocentric 88146 2008 286 0.0 2008-Oct-12 20:29:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:29:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-12 20:29:06 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-12 20:29:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:29:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:29:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-12 20:29:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:29:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:29:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:29:06 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-12 20:29:06 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.497629 2008.7853621948436 18.999933 2008-Oct-12 20:29:06 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333369 9.246666666666666 2008-Oct-12 20:29:06 LOG4 log_alfabeam: ALFABEAM 1 21.432811414683030 9.352519629878330 2008-Oct-12 20:29:06 LOG4 log_alfabeam: ALFABEAM 2 21.427755027730775 9.289413307896719 2008-Oct-12 20:29:06 LOG4 log_alfabeam: ALFABEAM 3 21.428233598723381 9.183493706069552 2008-Oct-12 20:29:06 LOG4 log_alfabeam: ALFABEAM 4 21.433881883678335 9.140810635575283 2008-Oct-12 20:29:06 LOG4 log_alfabeam: ALFABEAM 5 21.438959210470198 9.204651477418428 2008-Oct-12 20:29:06 LOG4 log_alfabeam: ALFABEAM 6 21.438367335516819 9.310434509139542 2008-Oct-12 20:29:06 INFO2 take_data: Starting WAPP+GALFA scan: 828600187 2008-Oct-12 20:29:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:29:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:29:07 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-12 20:29:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:29:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-12 20:29:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:29:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:29:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:29:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1748.00 2008-Oct-12 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:29:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:29:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:29:18 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-12 20:29:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:29:18 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-12 20:29:18 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-12 20:29:18 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-12 20:29:18 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-12 20:29:18 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:29:18 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:29:18 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:29:18 LOG2 antvel: Parameters to Doppler: Topocentric 88158 2008 286 0.0 2008-Oct-12 20:29:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:29:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-12 20:29:18 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-12 20:29:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:29:18 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:29:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-12 20:29:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:29:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-12 20:29:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:29:18 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-12 20:29:18 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.500971 2008.7853625751006 18.999933 2008-Oct-12 20:29:18 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333369 9.246666666666666 2008-Oct-12 20:29:18 LOG4 log_alfabeam: ALFABEAM 1 21.432848756438538 9.352558532420312 2008-Oct-12 20:29:18 LOG4 log_alfabeam: ALFABEAM 2 21.427770164679725 9.289843739790692 2008-Oct-12 20:29:18 LOG4 log_alfabeam: ALFABEAM 3 21.428211407782364 9.183888617941886 2008-Oct-12 20:29:18 LOG4 log_alfabeam: ALFABEAM 4 21.433844549150145 9.140769676111724 2008-Oct-12 20:29:18 LOG4 log_alfabeam: ALFABEAM 5 21.438944302527204 9.204216977648782 2008-Oct-12 20:29:18 LOG4 log_alfabeam: ALFABEAM 6 21.438389773822401 9.310044356244365 2008-Oct-12 20:29:18 INFO2 take_data: Starting WAPP+GALFA scan: 828600188 2008-Oct-12 20:29:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:29:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:29:19 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-12 20:29:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:29:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-12 20:29:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:29:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:29:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:29:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1760.00 2008-Oct-12 20:29:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:29:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:29:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:29:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:29:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:29:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:29:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:29:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:29:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:29:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:29:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:29:30 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-12 20:29:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:29:30 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-12 20:29:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-12 20:29:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 20:29:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 20:29:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 20:29:30 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-12 20:29:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 20:29:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 20:29:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 20:29:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 20:29:30 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-12 20:29:30 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-12 20:29:30 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-12 20:29:30 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-12 20:29:30 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:29:30 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:29:30 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:29:30 LOG2 antvel: Parameters to Doppler: Topocentric 88170 2008 286 0.0 2008-Oct-12 20:29:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:29:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-12 20:29:30 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-12 20:29:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:29:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:29:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-12 20:29:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:29:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:29:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:29:30 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-12 20:29:30 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.504314 2008.7853629553579 18.999933 2008-Oct-12 20:29:30 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333358 9.246666666666670 2008-Oct-12 20:29:30 LOG4 log_alfabeam: ALFABEAM 1 21.432886083024894 9.352594522638412 2008-Oct-12 20:29:30 LOG4 log_alfabeam: ALFABEAM 2 21.427785440978319 9.290272664813909 2008-Oct-12 20:29:30 LOG4 log_alfabeam: ALFABEAM 3 21.428189373719949 9.184284931520011 2008-Oct-12 20:29:30 LOG4 log_alfabeam: ALFABEAM 4 21.433807228313373 9.140731631245673 2008-Oct-12 20:29:30 LOG4 log_alfabeam: ALFABEAM 5 21.438929252185581 9.203783950783475 2008-Oct-12 20:29:30 LOG4 log_alfabeam: ALFABEAM 6 21.438412058402410 9.309652758450166 2008-Oct-12 20:29:30 INFO2 take_data: Starting WAPP+GALFA scan: 828600189 2008-Oct-12 20:29:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:29:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:29:31 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-12 20:29:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:29:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-12 20:29:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:29:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:29:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:29:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1772.00 2008-Oct-12 20:29:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:29:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:29:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:29:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:29:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:29:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:29:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:29:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:29:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:29:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:29:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:29:42 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-12 20:29:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:29:42 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-12 20:29:42 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-12 20:29:42 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-12 20:29:42 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-12 20:29:42 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:29:42 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:29:42 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:29:42 LOG2 antvel: Parameters to Doppler: Topocentric 88182 2008 286 0.0 2008-Oct-12 20:29:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:29:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-12 20:29:42 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-12 20:29:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:29:42 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:29:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-12 20:29:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:29:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:29:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:29:42 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-12 20:29:42 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.507656 2008.7853633356149 18.999933 2008-Oct-12 20:29:42 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333387 9.246666666666670 2008-Oct-12 20:29:42 LOG4 log_alfabeam: ALFABEAM 1 21.432923368978120 9.352627585419489 2008-Oct-12 20:29:42 LOG4 log_alfabeam: ALFABEAM 2 21.427800845725766 9.290699794832584 2008-Oct-12 20:29:42 LOG4 log_alfabeam: ALFABEAM 3 21.428167511079565 9.184682371195775 2008-Oct-12 20:29:42 LOG4 log_alfabeam: ALFABEAM 4 21.433769946632463 9.140696517663873 2008-Oct-12 20:29:42 LOG4 log_alfabeam: ALFABEAM 5 21.438914070181937 9.203352688218681 2008-Oct-12 20:29:42 LOG4 log_alfabeam: ALFABEAM 6 21.438434174510885 9.309259987872654 2008-Oct-12 20:29:42 INFO2 take_data: Starting WAPP+GALFA scan: 828600190 2008-Oct-12 20:29:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:29:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:29:43 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-12 20:29:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:29:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-12 20:29:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:29:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:29:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:29:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1784.00 2008-Oct-12 20:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:29:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:29:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:29:54 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-12 20:29:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:29:54 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-12 20:29:54 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-12 20:29:54 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-12 20:29:54 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-12 20:29:54 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:29:54 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:29:54 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:29:54 LOG2 antvel: Parameters to Doppler: Topocentric 88194 2008 286 0.0 2008-Oct-12 20:29:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:29:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-12 20:29:54 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-12 20:29:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:29:54 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:29:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-12 20:29:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:29:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:29:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:29:54 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-12 20:29:54 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.510999 2008.7853637158719 18.999933 2008-Oct-12 20:29:54 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333351 9.246666666666670 2008-Oct-12 20:29:54 LOG4 log_alfabeam: ALFABEAM 1 21.432960633495210 9.352657747696510 2008-Oct-12 20:29:54 LOG4 log_alfabeam: ALFABEAM 2 21.427816386350376 9.291125354453687 2008-Oct-12 20:29:54 LOG4 log_alfabeam: ALFABEAM 3 21.428145808092662 9.185081136099379 2008-Oct-12 20:29:54 LOG4 log_alfabeam: ALFABEAM 4 21.433732684917210 9.140664307547951 2008-Oct-12 20:29:54 LOG4 log_alfabeam: ALFABEAM 5 21.438898749193246 9.202922963690360 2008-Oct-12 20:29:54 LOG4 log_alfabeam: ALFABEAM 6 21.438456134014366 9.308865847522791 2008-Oct-12 20:29:54 INFO2 take_data: Starting WAPP+GALFA scan: 828600191 2008-Oct-12 20:29:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:29:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:29:55 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-12 20:29:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:29:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-12 20:29:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:29:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:29:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:29:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1796.00 2008-Oct-12 20:29:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:29:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:29:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:29:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:29:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:29:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:29:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:29:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:29:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:30:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:30:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:30:06 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-12 20:30:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:30:06 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-12 20:30:06 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-12 20:30:06 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-12 20:30:06 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-12 20:30:06 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:30:06 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:30:06 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:30:06 LOG2 antvel: Parameters to Doppler: Topocentric 88206 2008 286 0.0 2008-Oct-12 20:30:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:30:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-12 20:30:06 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-12 20:30:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:30:06 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:30:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-12 20:30:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:30:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:30:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:30:06 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-12 20:30:06 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.514341 2008.7853640961289 18.999933 2008-Oct-12 20:30:06 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333344 9.246666666666661 2008-Oct-12 20:30:06 LOG4 log_alfabeam: ALFABEAM 1 21.432997851185643 9.352684999286563 2008-Oct-12 20:30:06 LOG4 log_alfabeam: ALFABEAM 2 21.427832051737816 9.291549058624742 2008-Oct-12 20:30:06 LOG4 log_alfabeam: ALFABEAM 3 21.428124279011083 9.185480948789440 2008-Oct-12 20:30:06 LOG4 log_alfabeam: ALFABEAM 4 21.433695468560970 9.140635012644980 2008-Oct-12 20:30:06 LOG4 log_alfabeam: ALFABEAM 5 21.438883300175842 9.202495065565275 2008-Oct-12 20:30:06 LOG4 log_alfabeam: ALFABEAM 6 21.438477922453377 9.308470611441013 2008-Oct-12 20:30:06 INFO2 take_data: Starting WAPP+GALFA scan: 828600192 2008-Oct-12 20:30:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:30:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:30:07 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-12 20:30:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:30:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-12 20:30:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:30:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:30:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:30:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1808.00 2008-Oct-12 20:30:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:30:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:30:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:30:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:30:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:30:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:30:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:30:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:30:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:30:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:30:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:30:18 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-12 20:30:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:30:18 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-12 20:30:18 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-12 20:30:18 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-12 20:30:18 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-12 20:30:18 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:30:18 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:30:18 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:30:18 LOG2 antvel: Parameters to Doppler: Topocentric 88218 2008 286 0.0 2008-Oct-12 20:30:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:30:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-12 20:30:18 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-12 20:30:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:30:18 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:30:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-12 20:30:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:30:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:30:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:30:18 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-12 20:30:18 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.517684 2008.7853644763861 18.999933 2008-Oct-12 20:30:18 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333323 9.246666666666664 2008-Oct-12 20:30:18 LOG4 log_alfabeam: ALFABEAM 1 21.433035041244832 9.352709365074340 2008-Oct-12 20:30:18 LOG4 log_alfabeam: ALFABEAM 2 21.427847849418743 9.291971130991177 2008-Oct-12 20:30:18 LOG4 log_alfabeam: ALFABEAM 3 21.428102912171653 9.185882009484914 2008-Oct-12 20:30:18 LOG4 log_alfabeam: ALFABEAM 4 21.433658278374555 9.140608607183683 2008-Oct-12 20:30:18 LOG4 log_alfabeam: ALFABEAM 5 21.438867715703001 9.202068768517536 2008-Oct-12 20:30:18 LOG4 log_alfabeam: ALFABEAM 6 21.438499551591196 9.308074081531675 2008-Oct-12 20:30:18 INFO2 take_data: Starting WAPP+GALFA scan: 828600193 2008-Oct-12 20:30:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:30:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:30:19 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-12 20:30:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:30:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-12 20:30:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:30:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:30:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:30:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1820.00 2008-Oct-12 20:30:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:30:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:30:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:30:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:30:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:30:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:30:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:30:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:30:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:30:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:30:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:30:30 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-12 20:30:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:30:30 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-12 20:30:30 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-12 20:30:30 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-12 20:30:30 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-12 20:30:30 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:30:30 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78536 J 2008-Oct-12 20:30:30 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:30:30 LOG2 antvel: Parameters to Doppler: Topocentric 88230 2008 286 0.0 2008-Oct-12 20:30:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:30:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-12 20:30:30 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-12 20:30:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:30:30 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:30:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-12 20:30:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:30:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:30:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:30:30 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-12 20:30:30 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.521026 2008.7853648566431 18.999933 2008-Oct-12 20:30:30 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333319 9.246666666666670 2008-Oct-12 20:30:30 LOG4 log_alfabeam: ALFABEAM 1 21.433072178368391 9.352730839757946 2008-Oct-12 20:30:30 LOG4 log_alfabeam: ALFABEAM 2 21.427863768073223 9.292391289694317 2008-Oct-12 20:30:30 LOG4 log_alfabeam: ALFABEAM 3 21.428081721530404 9.186284039075256 2008-Oct-12 20:30:30 LOG4 log_alfabeam: ALFABEAM 4 21.433621139668112 9.140585098019095 2008-Oct-12 20:30:30 LOG4 log_alfabeam: ALFABEAM 5 21.438852006942959 9.201644357768027 2008-Oct-12 20:30:30 LOG4 log_alfabeam: ALFABEAM 6 21.438521007259300 9.307676533598435 2008-Oct-12 20:30:30 INFO2 take_data: Starting WAPP+GALFA scan: 828600194 2008-Oct-12 20:30:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:30:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:30:31 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-12 20:30:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:30:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-12 20:30:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:30:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:30:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:30:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1832.00 2008-Oct-12 20:30:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:30:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:30:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:30:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:30:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:30:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:30:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:30:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:30:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:30:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:30:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:30:42 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-12 20:30:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:30:42 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-12 20:30:42 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-12 20:30:42 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-12 20:30:42 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-12 20:30:42 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:30:42 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78537 J 2008-Oct-12 20:30:42 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:30:42 LOG2 antvel: Parameters to Doppler: Topocentric 88242 2008 286 0.0 2008-Oct-12 20:30:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:30:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-12 20:30:42 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-12 20:30:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:30:42 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:30:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-12 20:30:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:30:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-12 20:30:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-12 20:30:42 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-12 20:30:42 LOG5 log_alfabeam: Parameters: 21.433333333333334 9.2466666666666661 21.524369 2008.7853652369001 18.999933 2008-Oct-12 20:30:42 LOG4 log_alfabeam: ALFABEAM 0 21.433333333333358 9.246666666666670 2008-Oct-12 20:30:42 LOG4 log_alfabeam: ALFABEAM 1 21.433109281747203 9.352749446162189 2008-Oct-12 20:30:42 LOG4 log_alfabeam: ALFABEAM 2 21.427879815333664 9.292809757384209 2008-Oct-12 20:30:42 LOG4 log_alfabeam: ALFABEAM 3 21.428060695531595 9.186687238845870 2008-Oct-12 20:30:42 LOG4 log_alfabeam: ALFABEAM 4 21.433584033255858 9.140564461438638 2008-Oct-12 20:30:42 LOG4 log_alfabeam: ALFABEAM 5 21.438836166365800 9.201221608962564 2008-Oct-12 20:30:42 LOG4 log_alfabeam: ALFABEAM 6 21.438542301115525 9.307277768460708 2008-Oct-12 20:30:42 INFO2 take_data: Starting WAPP+GALFA scan: 828600195 2008-Oct-12 20:30:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-12 20:30:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-12 20:30:43 LOG5 begin_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-12 20:30:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:30:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-12 20:30:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:30:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:30:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:30:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1844.00 2008-Oct-12 20:30:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:30:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:30:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:30:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:30:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:30:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:30:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:30:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:30:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:30:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:30:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-12 20:30:54 LOG5 end_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-12 20:30:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-12 20:30:54 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-12 20:30:54 INFO2 smartfreq: Switching off CAL 2008-Oct-12 20:30:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 20:30:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 20:30:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 20:30:54 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-12 20:30:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 20:30:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 20:30:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 20:30:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 20:30:54 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-12 20:30:54 INFO3 restore_frequencies: Restoring original frequencies 2008-Oct-12 20:30:54 LOG5 antvel: Calling 'antvel 212600.000000 91448.000000 J 0' 2008-Oct-12 20:30:54 LOG2 antvel: Precessing RA = 21:26:00.0 Dec = +09:14:48.0 Epoch = 2008.78537 J 2008-Oct-12 20:30:54 LOG2 antvel: Computed apparent RA = 21:26:27.0 Dec = +09:17:15.1 2008-Oct-12 20:30:54 LOG2 antvel: Parameters to Doppler: Topocentric 88254 2008 286 0.0 2008-Oct-12 20:30:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:30:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-12 20:30:54 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-12 20:30:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:30:54 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:30:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-12 20:30:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:30:54 STOP finish_task: Finishing task 'smart frequency switching' 2008-Oct-12 20:30:54 LOG5 finish_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-12 20:30:54 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Oct-12 20:30:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:30:54 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Oct-12 20:30:55 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-12 20:30:55 NOTE run_command_file: DONE with command file processing 2008-Oct-12 20:30:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Oct-12 20:30:55 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Oct-12 20:30:55 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-12 20:30:55 DONE finish_task: DONE finished running: command file 'command_galfasrc' 2008-Oct-12 20:30:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:30:55 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'OK' 2008-Oct-12 20:30:55 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-12 20:30:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-12 20:30:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:30:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:30:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:31:08 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-12 20:31:08 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-12 20:31:08 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-12 20:31:08 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-12 20:31:08 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-12 20:31:08 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-12 20:31:08 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-12 20:31:08 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-12 20:31:08 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-12 20:31:08 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-12 20:31:08 LOG3 exec_msg: Closing socket 2008-Oct-12 20:31:08 LOG3 exec_msg: Closing socket 2008-Oct-12 20:31:08 LOG3 exec_msg: Closing socket 2008-Oct-12 20:31:08 LOG3 exec_msg: Closing socket 2008-Oct-12 20:31:10 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-12 20:31:10 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-12 20:31:10 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-12 20:31:10 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-12 20:31:48 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-12 20:31:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-12 20:31:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-12 20:31:51 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-12 20:31:51 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-12 20:31:51 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-12 20:31:51 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-12 20:31:51 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-12 20:31:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-12 20:31:51 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-12 20:31:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 20:31:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 20:31:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 20:31:51 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-12 20:31:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 20:31:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 20:31:51 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-12 20:31:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 20:31:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 20:31:51 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-12 20:31:51 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-12 20:31:51 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-12 20:31:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-12 20:31:51 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-12 20:31:51 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-12 20:31:51 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-12 20:31:51 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-12 20:31:51 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-12 20:31:51 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-12 20:31:51 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-12 20:31:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-12 20:31:51 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-12 20:31:51 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-12 20:31:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-12 20:31:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:31:51 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-12 20:31:51 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-12 20:31:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-12 20:31:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-12 20:31:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:31:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:31:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:31:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:31:51 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-12 20:31:51 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-12 20:31:51 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-12 20:31:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-12 20:31:51 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-12 20:31:51 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-12 20:31:51 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-12 20:31:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:31:51 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-12 20:31:51 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-12 20:31:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-12 20:31:52 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-12 20:31:52 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-12 20:31:52 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-12 20:31:52 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-12 20:31:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-12 20:31:52 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-12 20:31:52 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-12 20:31:52 START begin_task: Starting task 'selecting calibration port' 2008-Oct-12 20:31:52 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-12 20:31:52 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-12 20:31:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-12 20:31:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:31:52 START begin_task: Starting task 'waiting on calport' 2008-Oct-12 20:31:52 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-12 20:31:52 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-12 20:31:52 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-12 20:31:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:31:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:31:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 20:31:52 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-12 20:31:52 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-12 20:31:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-12 20:31:52 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-12 20:31:52 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-12 20:31:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 20:31:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 20:31:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 20:31:52 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-12 20:31:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 20:31:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:31:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 20:31:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 20:31:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 20:31:53 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-12 20:31:53 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-12 20:31:53 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-12 20:31:53 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-12 20:31:53 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-12 20:31:53 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-12 20:31:53 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-12 20:31:53 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-12 20:31:53 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-12 20:31:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:31:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:31:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:31:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:31:53 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-12 20:31:53 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-12 20:31:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 20:31:53 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-12 20:31:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-12 20:31:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-12 20:31:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 20:31:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 20:31:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 20:31:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 20:31:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 20:31:53 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-12 20:31:53 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-12 20:31:53 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-12 20:31:53 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-12 20:31:53 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-12 20:31:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:31:53 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-12 20:31:53 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-12 20:31:53 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-12 20:31:53 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-12 20:31:53 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-12 20:31:53 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-12 20:31:53 LOG5 begin_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-12 20:31:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-12 20:31:53 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-12 20:31:53 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-12 20:31:53 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-12 20:31:53 LOG5 finish_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-12 20:31:53 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-12 20:31:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:31:53 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-12 20:31:53 LOG5 end_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-12 20:31:54 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-12 20:31:54 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-12 20:31:54 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-12 20:35:08 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-12 20:35:08 LOG4 exec_msg: From OBSERVER: track_new_source drift38p2 213800.0 +091448 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-12 20:35:08 LOG1 track_new_source: Calling 'track_new_source drift38p2 213800.0 +091448 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-12 20:35:08 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-12 20:35:08 LOG5 begin_task: Level: (1) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-12 20:35:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift38p2} INFO {Selecting source 'drift38p2' ...} 2008-Oct-12 20:35:08 LOG3 track_source: Calling 'track_source drift38p2 213800.0 +091448 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-12 20:35:08 START begin_task: Starting task 'sending tracking commands' 2008-Oct-12 20:35:08 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-12 20:35:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift38p2} INFO {Slewing to source 'drift38p2' ...} 2008-Oct-12 20:35:08 INFO1 track_source: Starting to track drift38p2 2008-Oct-12 20:35:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift38p2" 2008-Oct-12 20:35:08 LOG3 vw_send: To DATATAKING: set ra 213800.0 2008-Oct-12 20:35:08 LOG3 vw_send: To DATATAKING: set dec +091448 2008-Oct-12 20:35:08 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-12 20:35:08 LOG3 vw_send: To DATATAKING: pnt tr 213800.0 +091448 -CJ 2008-Oct-12 20:35:08 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-12 20:35:08 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-12 20:35:08 LOG5 finish_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-12 20:35:08 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-12 20:35:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:35:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-12 20:35:08 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-12 20:35:08 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-12 20:35:08 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-12 20:35:08 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-12 20:35:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-12 20:35:09 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-12 20:35:09 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-12 20:35:09 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-12 20:35:09 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-12 20:35:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:35:09 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-12 20:35:09 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-12 20:35:09 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-12 20:35:09 LOG5 finish_task: Level: (1) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-12 20:35:09 DONE finish_task: DONE finished selecting: new source 2008-Oct-12 20:35:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:35:09 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-12 20:35:09 LOG5 end_task: Level: (1) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-12 20:35:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift38p2" 2008-Oct-12 20:35:09 LOG4 got_cormsg: From DATATAKING: set ra 213800.0 2008-Oct-12 20:35:09 LOG4 got_cormsg: From DATATAKING: set dec +091448 2008-Oct-12 20:35:09 LOG4 got_cormsg: From DATATAKING: vw% 213800.0 2008-Oct-12 20:35:09 LOG4 got_cormsg: From DATATAKING: vw% +091448 2008-Oct-12 20:35:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:35:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-12 20:35:09 LOG4 got_cormsg: From DATATAKING: pnt tr 213800.0 +091448 -CJ 2008-Oct-12 20:35:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-12 20:35:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-12 20:35:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:35:09 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-12 20:35:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:36:08 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-12 20:36:08 LOG4 exec_msg: From OBSERVER: track_new_source drift38p2 213800.0 +091448 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-12 20:36:08 LOG1 track_new_source: Calling 'track_new_source drift38p2 213800.0 +091448 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-12 20:36:08 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-12 20:36:08 LOG5 begin_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-12 20:36:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift38p2} INFO {Selecting source 'drift38p2' ...} 2008-Oct-12 20:36:08 LOG3 track_source: Calling 'track_source drift38p2 213800.0 +091448 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-12 20:36:08 START begin_task: Starting task 'sending tracking commands' 2008-Oct-12 20:36:08 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-12 20:36:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift38p2} INFO {Slewing to source 'drift38p2' ...} 2008-Oct-12 20:36:08 INFO1 track_source: Starting to track drift38p2 2008-Oct-12 20:36:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift38p2" 2008-Oct-12 20:36:08 LOG3 vw_send: To DATATAKING: set ra 213800.0 2008-Oct-12 20:36:08 LOG3 vw_send: To DATATAKING: set dec +091448 2008-Oct-12 20:36:08 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-12 20:36:08 LOG3 vw_send: To DATATAKING: pnt tr 213800.0 +091448 -CJ 2008-Oct-12 20:36:08 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-12 20:36:08 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-12 20:36:08 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-12 20:36:08 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-12 20:36:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:36:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-12 20:36:08 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-12 20:36:08 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-12 20:36:08 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-12 20:36:08 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-12 20:36:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-12 20:36:08 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-12 20:36:08 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-12 20:36:08 LOG5 finish_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-12 20:36:08 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-12 20:36:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:36:08 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-12 20:36:08 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-12 20:36:08 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-12 20:36:08 LOG5 finish_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-12 20:36:08 DONE finish_task: DONE finished selecting: new source 2008-Oct-12 20:36:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:36:08 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-12 20:36:08 LOG5 end_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-12 20:36:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift38p2" 2008-Oct-12 20:36:08 LOG4 got_cormsg: From DATATAKING: set ra 213800.0 2008-Oct-12 20:36:08 LOG4 got_cormsg: From DATATAKING: set dec +091448 2008-Oct-12 20:36:08 LOG4 got_cormsg: From DATATAKING: vw% 213800.0 2008-Oct-12 20:36:08 LOG4 got_cormsg: From DATATAKING: vw% +091448 2008-Oct-12 20:36:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:36:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-12 20:36:08 LOG4 got_cormsg: From DATATAKING: pnt tr 213800.0 +091448 -CJ 2008-Oct-12 20:36:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-12 20:36:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-12 20:36:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:36:08 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-12 20:36:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:36:55 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-12 20:36:55 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-12 20:36:55 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-12 20:36:55 LOG5 begin_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-12 20:36:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-12 20:36:55 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-12 20:36:56 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-12 20:36:56 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-12 20:36:56 LOG5 finish_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-12 20:36:56 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-12 20:36:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:36:56 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-12 20:36:56 LOG5 end_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-12 20:36:56 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-12 20:36:56 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-12 20:40:08 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-12 20:40:08 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-12 20:40:08 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-12 20:40:08 LOG5 begin_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-12 20:40:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-12 20:40:08 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-12 20:40:08 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-12 20:40:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-12 20:40:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:40:08 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-12 20:40:08 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-12 20:40:08 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-12 20:40:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:40:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:40:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 20:40:11 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-12 20:40:11 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-12 20:40:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-12 20:40:11 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-12 20:40:11 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-12 20:40:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-12 20:40:11 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-12 20:40:11 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-12 20:40:11 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-12 20:40:11 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-12 20:40:11 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-12 20:40:11 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-12 20:40:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-12 20:40:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:40:12 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-12 20:40:12 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 5 5 dB 2008-Oct-12 20:40:12 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2008-Oct-12 20:40:12 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 1 3 dB 2008-Oct-12 20:40:12 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-12 20:40:12 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-12 20:40:12 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-12 20:40:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.092 0.966 ALFA beam 1: 0.925 0.925 2008-Oct-12 20:40:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.045 1.008 ALFA beam 3: 0.890 0.882 2008-Oct-12 20:40:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.090 1.076 ALFA beam 5: 0.933 0.894 2008-Oct-12 20:40:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.978 0.985 ALFA beam 7: 1.086 0.878 2008-Oct-12 20:40:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-12 20:40:12 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-12 20:40:12 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Oct-12 20:40:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:40:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-12 20:40:12 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-12 20:40:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-12 20:40:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-12 20:40:12 LOG5 finish_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-12 20:40:12 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-12 20:40:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-12 20:40:12 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-12 20:40:12 LOG5 end_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-12 20:40:20 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Oct-12 20:40:20 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift38p2 214200.0 +091448 J 0 Topocentric velocity(optical) 2008-Oct-12 20:40:20 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift38p2 214200.0 +091448 J 0 Topocentric velocity(optical)' 2008-Oct-12 20:40:20 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Oct-12 20:40:20 LOG5 begin_task: Level: (1) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-12 20:40:20 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift38p2' 2008-Oct-12 20:40:20 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Oct-12 20:40:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift38p2} 2008-Oct-12 20:40:20 INFO5 fixed_driftmap: Start: year = 2008.7853835209269 RA = 21:42:27.2 Dec = +09:17:22.8 2008-Oct-12 20:40:20 NOTE fixed_driftmap: Setting ZA to 9:03:50.9 ... 2008-Oct-12 20:40:20 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 9.06 2008-Oct-12 20:40:20 LOG3 track_source: Calling 'track_source drift38p2 360.0 9.0641340464 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Oct-12 20:40:20 START begin_task: Starting task 'sending tracking commands' 2008-Oct-12 20:40:20 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-12 20:40:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift38p2} INFO {Slewing to source 'drift38p2' ...} 2008-Oct-12 20:40:20 INFO1 track_source: Starting to track drift38p2 2008-Oct-12 20:40:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift38p2" 2008-Oct-12 20:40:20 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Oct-12 20:40:20 LOG3 vw_send: To DATATAKING: set dec 9.0641340464 2008-Oct-12 20:40:20 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-12 20:40:20 LOG3 vw_send: To DATATAKING: pnt tr 360.0 9.0641340464 -CF 2008-Oct-12 20:40:20 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-12 20:40:20 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-12 20:40:20 LOG5 finish_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-12 20:40:20 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-12 20:40:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:40:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-12 20:40:20 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-12 20:40:20 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-12 20:40:20 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-12 20:40:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-12 20:40:20 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-12 20:40:20 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Oct-12 20:40:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-12 20:40:20 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-12 20:40:20 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-12 20:40:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift38p2" 2008-Oct-12 20:40:20 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Oct-12 20:40:20 LOG4 got_cormsg: From DATATAKING: set dec 9.0641340464 2008-Oct-12 20:40:20 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Oct-12 20:40:20 LOG4 got_cormsg: From DATATAKING: vw% 9.0641340464 2008-Oct-12 20:40:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:40:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-12 20:40:20 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 9.0641340464 -CF 2008-Oct-12 20:40:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-12 20:40:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-12 20:40:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:40:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-12 20:40:21 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-12 20:40:21 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-12 20:40:21 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-12 20:40:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-12 20:40:21 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-12 20:40:21 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-12 20:40:21 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-12 20:40:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:40:21 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-12 20:40:21 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-12 20:40:21 START begin_task: Starting task 'waiting on telescope' 2008-Oct-12 20:40:21 LOG5 begin_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-12 20:40:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-12 20:40:21 LOG3 waittrk: Start waittrk 5 2008-Oct-12 20:40:21 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-12 20:40:21 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-12 20:40:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-12 20:40:26 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-12 20:40:26 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-12 20:40:26 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-12 20:40:47 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-12 20:40:47 INFO2 waittrk: Now tracking drift38p2 2008-Oct-12 20:40:47 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 9.03 2008-Oct-12 20:40:47 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-12 20:40:47 LOG5 finish_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Oct-12 20:40:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:40:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-12 20:40:47 LOG5 end_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 20:40:47 LOG5 begin_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 20:40:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 20:40:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:40:47 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 20:40:47 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 20:40:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:40:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:40:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 20:40:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 20:40:47 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 20:40:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 20:40:47 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 20:40:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 20:40:47 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:40:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 20:40:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 20:40:47 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 20:40:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 20:40:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 20:40:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 20:40:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 20:40:47 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 20:40:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 20:40:47 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 20:40:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 20:40:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 20:40:47 LOG5 end_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 LOG5 dopset_later: Calling 'dopset_later 52.641995251184028' 2008-Oct-12 20:40:47 INFO3 dopset_later: Setting Doppler correction for 20:41:40 (52.6 seconds from now) 2008-Oct-12 20:40:47 LOG5 antvel: Calling 'antvel 360.000000 9.064134 F 52.641995251184028' 2008-Oct-12 20:40:47 LOG2 antvel: Transforming current Az = 360.00 ZA = 9.06 to apparent RA = 21:42:27.0 Dec = +09:17:22.8 2008-Oct-12 20:40:47 LOG2 antvel: Parameters to Doppler: Topocentric 88900 2008 286 0.0 2008-Oct-12 20:40:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-12 20:40:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-12 20:40:47 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-12 20:40:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-12 20:40:47 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-12 20:40:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-12 20:40:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:40:47 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-12 20:40:47 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-12 20:40:47 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-12 20:40:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-12 20:40:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-12 20:40:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:40:47 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-12 20:40:47 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-12 20:40:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-12 20:40:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-12 20:40:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-12 20:40:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:40:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:40:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:40:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:40:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 20:40:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-12 20:40:50 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-12 20:40:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-12 20:40:50 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-12 20:40:50 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-12 20:40:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-12 20:40:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-12 20:40:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-12 20:40:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-12 20:40:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-12 20:40:51 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-12 20:40:51 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-12 20:40:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:40:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-12 20:40:51 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-12 20:40:51 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 5 5 dB 2008-Oct-12 20:40:51 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2008-Oct-12 20:40:51 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 1 3 dB 2008-Oct-12 20:40:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-12 20:40:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-12 20:40:51 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-12 20:40:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.094 0.969 ALFA beam 1: 0.925 0.925 2008-Oct-12 20:40:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.046 1.028 ALFA beam 3: 0.901 0.896 2008-Oct-12 20:40:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.106 1.107 ALFA beam 5: 0.932 0.893 2008-Oct-12 20:40:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.998 1.013 ALFA beam 7: 1.100 0.898 2008-Oct-12 20:40:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-12 20:40:51 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-12 20:40:51 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-12 20:40:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:40:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-12 20:40:51 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-12 20:40:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 20:40:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-12 20:40:51 LOG5 finish_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-12 20:40:51 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-12 20:40:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:40:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-12 20:40:51 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-12 20:40:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:40:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:40:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:40:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:40:51 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:42:27.2 LST = 21:41:38.4 diff = 48.8 secs 2008-Oct-12 20:40:51 INFO2 fixed_driftmap: Waiting 46.8 seconds for RA 21:42:27 2008-Oct-12 20:40:51 INFO2 lstwait: Waiting for 46.6 secs from LST 21:41:38 to LST 21:42:25 ... 2008-Oct-12 20:40:51 LOG4 send_obs_status: To obs_status: <1> TASKTIME 46.644415876782205 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Oct-12 20:40:51 START begin_task: Starting task 'waiting on wait on LST' 2008-Oct-12 20:40:51 LOG5 begin_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-12 20:40:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 20:40:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0001.fits 2008-Oct-12 20:40:52 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081012.a2010.0001.fits} 2008-Oct-12 20:41:38 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Oct-12 20:41:38 LOG5 end_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-12 20:41:38 LOG4 lstwait: Finished waiting 0.36 seconds late 2008-Oct-12 20:41:38 INFO3 lstwait: Finished waiting 2008-Oct-12 20:41:38 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-12 20:41:38 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Oct-12 20:41:38 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-12 20:41:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 20:41:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 20:41:38 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 20:41:38 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 20:41:38 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-12 20:41:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 20:41:38 INFO2 take_data: Starting WAPP scan: 828600196 2008-Oct-12 20:41:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 20:41:39 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 20:41:39 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-12 20:41:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:41:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2500.00 2008-Oct-12 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:51:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:51:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 20:51:40 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-12 20:51:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 20:51:40 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-12 20:51:40 LOG1 fixed_driftmap: New position: year = 2008.7854051005145 RA = 21:52:02.5 RA/Dec = 21:52:29.8 +09:17:27.3 2008-Oct-12 20:51:40 NOTE fixed_driftmap: Correcting ZA to 9:03:46.4 ... 2008-Oct-12 20:51:40 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0628810697 -CF 2008-Oct-12 20:51:40 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 20:51:40 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 20:51:40 LOG5 begin_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-12 20:51:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 20:51:40 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 20:51:40 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-12 20:51:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 20:51:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 20:51:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:51:40 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 20:51:40 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-12 20:51:40 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0628810697 -CF 2008-Oct-12 20:51:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:51:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 20:51:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 20:51:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:51:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 20:51:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 20:51:40 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-12 20:51:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 20:51:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 20:51:40 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 20:51:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 20:51:40 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-12 20:51:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 20:51:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 20:51:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 20:51:41 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-12 20:51:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 20:51:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 20:51:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 20:51:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 20:51:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 20:51:41 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-12 20:51:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 20:51:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 20:51:41 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-12 20:51:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 20:51:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 20:51:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 20:51:41 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-12 20:51:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 20:51:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 20:51:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 20:51:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 20:51:41 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-12 20:51:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 20:51:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 20:51:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 20:51:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 20:51:41 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-12 20:51:41 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 20:51:41 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 20:51:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 20:51:41 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-12 20:51:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 20:51:41 INFO2 take_data: Starting WAPP scan: 828600197 2008-Oct-12 20:51:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 20:51:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 20:51:41 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-12 20:51:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:51:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3102.00 2008-Oct-12 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:51:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 20:51:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 20:51:43 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-12 20:51:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 20:51:43 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-12 20:51:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 20:51:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 20:51:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 20:51:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 20:51:43 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-12 20:51:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 20:51:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 20:51:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 20:51:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 20:51:43 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-12 20:51:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 20:51:43 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 20:51:43 LOG5 finish_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-12 20:51:43 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 20:51:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 20:51:43 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 20:51:43 LOG5 end_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-12 20:51:43 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Oct-12 20:51:43 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-12 20:51:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:51:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:51:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:51:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 20:51:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 20:51:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 20:51:44 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 20:51:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 20:51:44 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-12 20:51:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 20:51:44 INFO2 take_data: Starting WAPP scan: 828600198 2008-Oct-12 20:51:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 20:51:44 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 20:51:44 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-12 20:51:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 20:51:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 20:51:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3105.00 2008-Oct-12 20:51:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0002.fits 2008-Oct-12 20:51:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0002.fits} 2008-Oct-12 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:01:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 21:01:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 21:01:45 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-12 21:01:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 21:01:45 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-12 21:01:45 LOG1 fixed_driftmap: New position: year = 2008.7854242718076 RA = 22:02:09.0 RA/Dec = 22:02:36.5 +09:17:31.6 2008-Oct-12 21:01:45 NOTE fixed_driftmap: Correcting ZA to 9:03:42.1 ... 2008-Oct-12 21:01:45 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0617015365 -CF 2008-Oct-12 21:01:45 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 21:01:45 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 21:01:45 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-12 21:01:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 21:01:45 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 21:01:45 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-12 21:01:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 21:01:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 21:01:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 21:01:45 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 21:01:45 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-12 21:01:45 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0617015365 -CF 2008-Oct-12 21:01:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:01:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 21:01:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 21:01:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:01:45 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 21:01:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 21:01:45 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-12 21:01:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 21:01:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 21:01:45 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 21:01:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 21:01:45 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-12 21:01:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:01:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 21:01:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 21:01:46 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-12 21:01:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 21:01:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 21:01:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 21:01:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 21:01:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 21:01:46 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-12 21:01:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 21:01:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 21:01:46 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-12 21:01:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 21:01:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 21:01:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 21:01:46 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-12 21:01:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 21:01:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 21:01:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 21:01:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 21:01:46 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-12 21:01:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 21:01:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 21:01:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 21:01:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 21:01:46 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-12 21:01:46 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 21:01:46 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 21:01:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 21:01:46 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-12 21:01:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 21:01:46 INFO2 take_data: Starting WAPP scan: 828600199 2008-Oct-12 21:01:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 21:01:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 21:01:46 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-12 21:01:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 21:01:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3707.00 2008-Oct-12 21:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 21:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:01:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 21:01:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 21:01:48 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-12 21:01:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 21:01:48 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-12 21:01:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 21:01:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 21:01:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 21:01:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 21:01:48 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-12 21:01:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 21:01:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 21:01:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 21:01:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 21:01:48 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-12 21:01:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 21:01:48 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 21:01:48 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-12 21:01:48 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 21:01:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 21:01:48 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 21:01:48 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-12 21:01:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Oct-12 21:01:48 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Oct-12 21:01:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:01:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:01:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:01:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:01:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 21:01:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 21:01:49 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 21:01:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 21:01:49 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-12 21:01:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 21:01:49 INFO2 take_data: Starting WAPP scan: 828600200 2008-Oct-12 21:01:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 21:01:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 21:01:49 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-12 21:01:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 21:01:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 21:01:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3710.00 2008-Oct-12 21:01:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0003.fits 2008-Oct-12 21:01:49 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0003.fits} 2008-Oct-12 21:01:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 21:01:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:01:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:01:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:01:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:01:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:01:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:01:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:01:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:11:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 21:11:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 21:11:50 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-12 21:11:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 21:11:50 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-12 21:11:50 LOG1 fixed_driftmap: New position: year = 2008.7854434431008 RA = 22:12:15.6 RA/Dec = 22:12:43.1 +09:17:35.5 2008-Oct-12 21:11:50 NOTE fixed_driftmap: Correcting ZA to 9:03:38.2 ... 2008-Oct-12 21:11:50 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0606063823 -CF 2008-Oct-12 21:11:50 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 21:11:50 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 21:11:50 LOG5 begin_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-12 21:11:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 21:11:50 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 21:11:50 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Oct-12 21:11:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 21:11:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 21:11:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 21:11:50 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 21:11:50 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-12 21:11:50 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0606063823 -CF 2008-Oct-12 21:11:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:11:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 21:11:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 21:11:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:11:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 21:11:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 21:11:50 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-12 21:11:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 21:11:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 21:11:50 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 21:11:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 21:11:50 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-12 21:11:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:11:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 21:11:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 21:11:51 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-12 21:11:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 21:11:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 21:11:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 21:11:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 21:11:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 21:11:51 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-12 21:11:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 21:11:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 21:11:51 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-12 21:11:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 21:11:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 21:11:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 21:11:51 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Oct-12 21:11:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 21:11:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 21:11:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 21:11:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 21:11:51 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-12 21:11:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 21:11:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 21:11:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 21:11:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 21:11:51 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-12 21:11:51 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 21:11:51 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 21:11:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 21:11:51 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-12 21:11:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 21:11:51 INFO2 take_data: Starting WAPP scan: 828600201 2008-Oct-12 21:11:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 21:11:51 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 21:11:51 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-12 21:11:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 21:11:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4312.00 2008-Oct-12 21:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 21:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:11:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 21:11:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 21:11:53 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-12 21:11:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 21:11:53 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-12 21:11:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 21:11:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 21:11:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 21:11:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 21:11:53 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-12 21:11:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 21:11:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 21:11:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 21:11:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 21:11:53 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-12 21:11:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 21:11:53 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 21:11:53 LOG5 finish_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-12 21:11:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 21:11:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 21:11:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 21:11:53 LOG5 end_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-12 21:11:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Oct-12 21:11:53 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Oct-12 21:11:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:11:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:11:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:11:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:11:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 21:11:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 21:11:54 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 21:11:54 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 21:11:54 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2008-Oct-12 21:11:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 21:11:54 INFO2 take_data: Starting WAPP scan: 828600202 2008-Oct-12 21:11:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 21:11:54 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 21:11:54 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Oct-12 21:11:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 21:11:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 21:11:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4315.00 2008-Oct-12 21:11:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0004.fits 2008-Oct-12 21:11:54 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0004.fits} 2008-Oct-12 21:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 21:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:21:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 21:21:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 21:21:55 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Oct-12 21:21:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 21:21:55 LOG5 end_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2008-Oct-12 21:21:55 LOG1 fixed_driftmap: New position: year = 2008.785462614394 RA = 22:22:22.1 RA/Dec = 22:22:49.8 +09:17:39.1 2008-Oct-12 21:21:55 NOTE fixed_driftmap: Correcting ZA to 9:03:34.6 ... 2008-Oct-12 21:21:55 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0595977387 -CF 2008-Oct-12 21:21:55 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 21:21:55 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 21:21:55 LOG5 begin_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-12 21:21:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 21:21:55 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 21:21:55 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-12 21:21:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 21:21:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 21:21:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 21:21:55 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 21:21:55 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-12 21:21:55 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0595977387 -CF 2008-Oct-12 21:21:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:21:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 21:21:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 21:21:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:21:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 21:21:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 21:21:55 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-12 21:21:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 21:21:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 21:21:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 21:21:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 21:21:55 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-12 21:21:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:21:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 21:21:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 21:21:56 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-12 21:21:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 21:21:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 21:21:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 21:21:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 21:21:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 21:21:56 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-12 21:21:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 21:21:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 21:21:56 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-12 21:21:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 21:21:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 21:21:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 21:21:56 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-12 21:21:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 21:21:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 21:21:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 21:21:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 21:21:56 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-12 21:21:56 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 21:21:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 21:21:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 21:21:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 21:21:56 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-12 21:21:56 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 21:21:56 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 21:21:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 21:21:56 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-12 21:21:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 21:21:56 INFO2 take_data: Starting WAPP scan: 828600203 2008-Oct-12 21:21:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 21:21:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 21:21:56 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-12 21:21:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 21:21:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4917.00 2008-Oct-12 21:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 21:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:21:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 21:21:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 21:21:58 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-12 21:21:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 21:21:58 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-12 21:21:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 21:21:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 21:21:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 21:21:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 21:21:58 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-12 21:21:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 21:21:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 21:21:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 21:21:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 21:21:58 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-12 21:21:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 21:21:58 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 21:21:58 LOG5 finish_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-12 21:21:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 21:21:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 21:21:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 21:21:58 LOG5 end_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-12 21:21:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Oct-12 21:21:58 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Oct-12 21:21:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:21:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:21:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:21:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:21:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 21:21:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 21:21:59 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 21:21:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 21:21:59 LOG5 begin_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2008-Oct-12 21:21:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 21:21:59 INFO2 take_data: Starting WAPP scan: 828600204 2008-Oct-12 21:21:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 21:21:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 21:21:59 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Oct-12 21:21:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 21:21:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 21:21:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4920.00 2008-Oct-12 21:21:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0005.fits 2008-Oct-12 21:21:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0005.fits} 2008-Oct-12 21:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 21:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:32:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 21:32:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 21:32:00 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Oct-12 21:32:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 21:32:00 LOG5 end_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2008-Oct-12 21:32:00 LOG1 fixed_driftmap: New position: year = 2008.7854817856871 RA = 22:32:28.7 RA/Dec = 22:32:56.4 +09:17:42.5 2008-Oct-12 21:32:00 NOTE fixed_driftmap: Correcting ZA to 9:03:31.2 ... 2008-Oct-12 21:32:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0586775693 -CF 2008-Oct-12 21:32:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 21:32:00 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 21:32:00 LOG5 begin_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2008-Oct-12 21:32:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 21:32:00 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 21:32:00 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Oct-12 21:32:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 21:32:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 21:32:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 21:32:00 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 21:32:00 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Oct-12 21:32:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0586775693 -CF 2008-Oct-12 21:32:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:32:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 21:32:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 21:32:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:32:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 21:32:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 21:32:00 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Oct-12 21:32:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 21:32:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 21:32:00 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 21:32:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 21:32:00 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2008-Oct-12 21:32:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:32:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 21:32:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 21:32:01 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2008-Oct-12 21:32:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 21:32:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 21:32:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 21:32:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 21:32:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 21:32:01 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2008-Oct-12 21:32:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 21:32:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 21:32:01 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2008-Oct-12 21:32:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 21:32:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 21:32:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 21:32:01 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Oct-12 21:32:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 21:32:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 21:32:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 21:32:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 21:32:01 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Oct-12 21:32:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 21:32:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 21:32:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 21:32:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 21:32:01 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Oct-12 21:32:01 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 21:32:01 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 21:32:01 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 21:32:01 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Oct-12 21:32:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 21:32:01 INFO2 take_data: Starting WAPP scan: 828600205 2008-Oct-12 21:32:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 21:32:01 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 21:32:01 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2008-Oct-12 21:32:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 21:32:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5522.00 2008-Oct-12 21:32:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 21:32:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:32:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:32:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:32:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:32:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:32:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:32:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:32:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:32:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 21:32:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 21:32:03 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2008-Oct-12 21:32:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 21:32:03 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Oct-12 21:32:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 21:32:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 21:32:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 21:32:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 21:32:03 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2008-Oct-12 21:32:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 21:32:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 21:32:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 21:32:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 21:32:03 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2008-Oct-12 21:32:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 21:32:03 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 21:32:03 LOG5 finish_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2008-Oct-12 21:32:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 21:32:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 21:32:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 21:32:03 LOG5 end_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2008-Oct-12 21:32:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2008-Oct-12 21:32:03 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2008-Oct-12 21:32:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:32:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:32:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:32:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:32:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 21:32:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 21:32:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 21:32:04 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 21:32:04 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2008-Oct-12 21:32:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 21:32:04 INFO2 take_data: Starting WAPP scan: 828600206 2008-Oct-12 21:32:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 21:32:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 21:32:04 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-Oct-12 21:32:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 21:32:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 21:32:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0006.fits 2008-Oct-12 21:32:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5525.00 2008-Oct-12 21:32:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0006.fits} 2008-Oct-12 21:32:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 21:32:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:32:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:32:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:32:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:32:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:32:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:32:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:32:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:35:36 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 21:35:36.302 (seconds: 77736.302)!} 2008-Oct-12 21:35:36 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 21:35:36.302 (seconds: 77736.302)! 2008-Oct-12 21:35:37 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 77735.0 to 77736.0! 2008-Oct-12 21:35:38 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (77735.0 - 77737.0)! 2008-Oct-12 21:42:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 21:42:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 21:42:05 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-Oct-12 21:42:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 21:42:05 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2008-Oct-12 21:42:05 LOG1 fixed_driftmap: New position: year = 2008.7855009569803 RA = 22:42:35.2 RA/Dec = 22:43:03.1 +09:17:45.4 2008-Oct-12 21:42:05 NOTE fixed_driftmap: Correcting ZA to 9:03:28.3 ... 2008-Oct-12 21:42:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0578476696 -CF 2008-Oct-12 21:42:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 21:42:05 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 21:42:05 LOG5 begin_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2008-Oct-12 21:42:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 21:42:05 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 21:42:05 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Oct-12 21:42:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 21:42:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 21:42:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 21:42:05 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 21:42:05 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Oct-12 21:42:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0578476696 -CF 2008-Oct-12 21:42:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:42:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 21:42:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 21:42:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:42:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 21:42:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 21:42:05 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Oct-12 21:42:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 21:42:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 21:42:05 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 21:42:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 21:42:05 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2008-Oct-12 21:42:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:42:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 21:42:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 21:42:06 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2008-Oct-12 21:42:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 21:42:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 21:42:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 21:42:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 21:42:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 21:42:06 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2008-Oct-12 21:42:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 21:42:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 21:42:06 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2008-Oct-12 21:42:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 21:42:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 21:42:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 21:42:06 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Oct-12 21:42:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 21:42:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 21:42:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 21:42:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 21:42:06 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Oct-12 21:42:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 21:42:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 21:42:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 21:42:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 21:42:06 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Oct-12 21:42:06 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 21:42:06 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 21:42:06 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 21:42:06 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Oct-12 21:42:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 21:42:06 INFO2 take_data: Starting WAPP scan: 828600207 2008-Oct-12 21:42:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 21:42:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 21:42:06 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Oct-12 21:42:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 21:42:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6127.00 2008-Oct-12 21:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 21:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:42:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 21:42:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 21:42:08 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Oct-12 21:42:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 21:42:08 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Oct-12 21:42:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 21:42:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 21:42:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 21:42:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 21:42:08 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Oct-12 21:42:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 21:42:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 21:42:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 21:42:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 21:42:08 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Oct-12 21:42:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 21:42:08 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 21:42:08 LOG5 finish_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2008-Oct-12 21:42:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 21:42:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 21:42:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 21:42:08 LOG5 end_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2008-Oct-12 21:42:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2008-Oct-12 21:42:08 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2008-Oct-12 21:42:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:42:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:42:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:42:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:42:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 21:42:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 21:42:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 21:42:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 21:42:09 LOG5 begin_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2008-Oct-12 21:42:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 21:42:09 INFO2 take_data: Starting WAPP scan: 828600208 2008-Oct-12 21:42:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 21:42:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 21:42:09 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Oct-12 21:42:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 21:42:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 21:42:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6130.00 2008-Oct-12 21:42:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0007.fits 2008-Oct-12 21:42:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0007.fits} 2008-Oct-12 21:42:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 21:42:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:42:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:42:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:42:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:42:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:42:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:42:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:42:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:52:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 21:52:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 21:52:10 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Oct-12 21:52:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 21:52:10 LOG5 end_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2008-Oct-12 21:52:10 LOG1 fixed_driftmap: New position: year = 2008.7855201282734 RA = 22:52:41.7 RA/Dec = 22:53:09.7 +09:17:48.1 2008-Oct-12 21:52:10 NOTE fixed_driftmap: Correcting ZA to 9:03:25.6 ... 2008-Oct-12 21:52:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0571096411 -CF 2008-Oct-12 21:52:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 21:52:10 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 21:52:10 LOG5 begin_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2008-Oct-12 21:52:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 21:52:10 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 21:52:10 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Oct-12 21:52:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 21:52:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 21:52:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 21:52:10 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 21:52:10 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Oct-12 21:52:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0571096411 -CF 2008-Oct-12 21:52:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:52:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 21:52:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 21:52:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:52:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 21:52:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 21:52:10 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Oct-12 21:52:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 21:52:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 21:52:11 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 21:52:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 21:52:11 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Oct-12 21:52:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 21:52:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 21:52:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 21:52:11 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Oct-12 21:52:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 21:52:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 21:52:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 21:52:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 21:52:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 21:52:11 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2008-Oct-12 21:52:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 21:52:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 21:52:11 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2008-Oct-12 21:52:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 21:52:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 21:52:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 21:52:11 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Oct-12 21:52:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 21:52:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 21:52:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 21:52:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 21:52:11 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Oct-12 21:52:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 21:52:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 21:52:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 21:52:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 21:52:11 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Oct-12 21:52:11 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 21:52:11 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 21:52:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 21:52:11 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Oct-12 21:52:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 21:52:11 INFO2 take_data: Starting WAPP scan: 828600209 2008-Oct-12 21:52:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 21:52:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 21:52:11 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Oct-12 21:52:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 21:52:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6732.00 2008-Oct-12 21:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 21:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:52:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:52:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 21:52:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 21:52:13 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Oct-12 21:52:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 21:52:13 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Oct-12 21:52:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 21:52:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 21:52:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 21:52:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 21:52:13 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Oct-12 21:52:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 21:52:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 21:52:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 21:52:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 21:52:13 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Oct-12 21:52:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 21:52:13 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 21:52:13 LOG5 finish_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2008-Oct-12 21:52:13 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 21:52:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 21:52:13 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 21:52:13 LOG5 end_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2008-Oct-12 21:52:13 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2008-Oct-12 21:52:13 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2008-Oct-12 21:52:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:52:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:52:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:52:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 21:52:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 21:52:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 21:52:14 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 21:52:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 21:52:14 LOG5 begin_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2008-Oct-12 21:52:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 21:52:14 INFO2 take_data: Starting WAPP scan: 828600210 2008-Oct-12 21:52:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 21:52:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 21:52:14 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Oct-12 21:52:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 21:52:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 21:52:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6735.00 2008-Oct-12 21:52:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0008.fits 2008-Oct-12 21:52:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0008.fits} 2008-Oct-12 21:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 21:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 21:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 21:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 21:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 21:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:02:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 22:02:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 22:02:15 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Oct-12 22:02:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 22:02:15 LOG5 end_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2008-Oct-12 22:02:15 LOG1 fixed_driftmap: New position: year = 2008.7855392995664 RA = 23:02:48.3 RA/Dec = 23:03:16.4 +09:17:50.4 2008-Oct-12 22:02:15 NOTE fixed_driftmap: Correcting ZA to 9:03:23.3 ... 2008-Oct-12 22:02:15 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0564649342 -CF 2008-Oct-12 22:02:15 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 22:02:15 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 22:02:15 LOG5 begin_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2008-Oct-12 22:02:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 22:02:15 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 22:02:15 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Oct-12 22:02:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 22:02:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 22:02:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 22:02:15 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 22:02:15 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Oct-12 22:02:15 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0564649342 -CF 2008-Oct-12 22:02:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:02:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 22:02:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 22:02:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:02:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 22:02:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 22:02:15 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Oct-12 22:02:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 22:02:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 22:02:15 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 22:02:15 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 22:02:15 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Oct-12 22:02:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:02:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 22:02:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 22:02:16 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Oct-12 22:02:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 22:02:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 22:02:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 22:02:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 22:02:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 22:02:16 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Oct-12 22:02:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 22:02:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 22:02:16 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Oct-12 22:02:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 22:02:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 22:02:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 22:02:16 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Oct-12 22:02:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 22:02:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 22:02:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 22:02:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 22:02:16 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Oct-12 22:02:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 22:02:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 22:02:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 22:02:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 22:02:16 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Oct-12 22:02:16 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 22:02:16 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 22:02:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 22:02:16 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Oct-12 22:02:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 22:02:16 INFO2 take_data: Starting WAPP scan: 828600211 2008-Oct-12 22:02:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 22:02:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 22:02:16 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Oct-12 22:02:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 22:02:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7337.00 2008-Oct-12 22:02:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 22:02:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:02:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:02:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:02:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:02:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:02:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:02:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:02:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:02:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 22:02:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 22:02:18 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Oct-12 22:02:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 22:02:18 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Oct-12 22:02:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 22:02:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 22:02:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 22:02:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 22:02:18 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2008-Oct-12 22:02:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 22:02:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 22:02:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 22:02:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 22:02:18 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2008-Oct-12 22:02:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 22:02:18 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 22:02:18 LOG5 finish_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2008-Oct-12 22:02:18 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 22:02:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 22:02:18 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 22:02:18 LOG5 end_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2008-Oct-12 22:02:18 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2008-Oct-12 22:02:18 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2008-Oct-12 22:02:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:02:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:02:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:02:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:02:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 22:02:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 22:02:19 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 22:02:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 22:02:19 LOG5 begin_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2008-Oct-12 22:02:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 22:02:19 INFO2 take_data: Starting WAPP scan: 828600212 2008-Oct-12 22:02:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 22:02:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 22:02:19 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Oct-12 22:02:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 22:02:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 22:02:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0009.fits 2008-Oct-12 22:02:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7340.00 2008-Oct-12 22:02:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0009.fits} 2008-Oct-12 22:02:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 22:02:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:02:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:02:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:02:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:02:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:02:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:02:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:02:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:05:34 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:05:34.302 (seconds: 79534.302)!} 2008-Oct-12 22:05:34 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:05:34.302 (seconds: 79534.302)! 2008-Oct-12 22:05:35 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 79533.0 to 79534.0! 2008-Oct-12 22:05:36 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (79533.0 - 79535.0)! 2008-Oct-12 22:12:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 22:12:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 22:12:20 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Oct-12 22:12:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 22:12:20 LOG5 end_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2008-Oct-12 22:12:20 LOG1 fixed_driftmap: New position: year = 2008.7855584708595 RA = 23:12:54.8 RA/Dec = 23:13:23.1 +09:17:52.4 2008-Oct-12 22:12:20 NOTE fixed_driftmap: Correcting ZA to 9:03:21.3 ... 2008-Oct-12 22:12:20 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0559147990 -CF 2008-Oct-12 22:12:20 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 22:12:20 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 22:12:20 LOG5 begin_task: Level: (2) ID = <10227> Status = 0 0 0 0 ok 2008-Oct-12 22:12:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 22:12:20 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 22:12:20 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Oct-12 22:12:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 22:12:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 22:12:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 22:12:20 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 22:12:20 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Oct-12 22:12:20 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0559147990 -CF 2008-Oct-12 22:12:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:12:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 22:12:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 22:12:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:12:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 22:12:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 22:12:20 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Oct-12 22:12:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 22:12:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 22:12:20 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 22:12:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 22:12:20 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Oct-12 22:12:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:12:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 22:12:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 22:12:21 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Oct-12 22:12:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 22:12:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 22:12:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 22:12:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 22:12:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 22:12:21 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Oct-12 22:12:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 22:12:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 22:12:21 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2008-Oct-12 22:12:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 22:12:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 22:12:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 22:12:21 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Oct-12 22:12:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 22:12:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 22:12:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 22:12:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 22:12:21 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Oct-12 22:12:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 22:12:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 22:12:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 22:12:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 22:12:21 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Oct-12 22:12:21 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 22:12:21 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 22:12:21 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 22:12:21 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Oct-12 22:12:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 22:12:21 INFO2 take_data: Starting WAPP scan: 828600213 2008-Oct-12 22:12:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 22:12:21 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 22:12:21 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Oct-12 22:12:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 22:12:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7942.00 2008-Oct-12 22:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 22:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:12:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 22:12:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 22:12:23 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Oct-12 22:12:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 22:12:23 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Oct-12 22:12:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 22:12:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 22:12:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 22:12:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 22:12:23 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Oct-12 22:12:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 22:12:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 22:12:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 22:12:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 22:12:23 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Oct-12 22:12:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 22:12:23 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 22:12:23 LOG5 finish_task: Level: (2) ID = <10227> Status = 0 0 0 0 ok 2008-Oct-12 22:12:23 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 22:12:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 22:12:23 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 22:12:23 LOG5 end_task: Level: (2) ID = <10227> Status = 0 0 0 0 ok 2008-Oct-12 22:12:23 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2008-Oct-12 22:12:23 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2008-Oct-12 22:12:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:12:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:12:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:12:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:12:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 22:12:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 22:12:24 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 22:12:24 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 22:12:24 LOG5 begin_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2008-Oct-12 22:12:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 22:12:24 INFO2 take_data: Starting WAPP scan: 828600214 2008-Oct-12 22:12:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 22:12:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 22:12:24 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Oct-12 22:12:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 22:12:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 22:12:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0010.fits 2008-Oct-12 22:12:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7945.00 2008-Oct-12 22:12:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0010.fits} 2008-Oct-12 22:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 22:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:22:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 22:22:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 22:22:25 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Oct-12 22:22:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 22:22:25 LOG5 end_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2008-Oct-12 22:22:25 LOG1 fixed_driftmap: New position: year = 2008.7855776421527 RA = 23:23:01.4 RA/Dec = 23:23:29.7 +09:17:54.0 2008-Oct-12 22:22:25 NOTE fixed_driftmap: Correcting ZA to 9:03:19.7 ... 2008-Oct-12 22:22:25 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0554603037 -CF 2008-Oct-12 22:22:25 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 22:22:25 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 22:22:25 LOG5 begin_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2008-Oct-12 22:22:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 22:22:25 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 22:22:25 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Oct-12 22:22:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 22:22:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 22:22:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 22:22:25 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 22:22:25 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Oct-12 22:22:25 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0554603037 -CF 2008-Oct-12 22:22:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:22:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 22:22:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 22:22:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:22:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 22:22:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 22:22:25 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Oct-12 22:22:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 22:22:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 22:22:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 22:22:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 22:22:26 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2008-Oct-12 22:22:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:22:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 22:22:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 22:22:27 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2008-Oct-12 22:22:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 22:22:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 22:22:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 22:22:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 22:22:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 22:22:27 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Oct-12 22:22:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 22:22:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 22:22:27 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Oct-12 22:22:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 22:22:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 22:22:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 22:22:27 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Oct-12 22:22:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 22:22:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 22:22:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 22:22:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 22:22:27 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2008-Oct-12 22:22:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 22:22:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 22:22:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 22:22:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 22:22:27 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2008-Oct-12 22:22:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 22:22:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 22:22:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 22:22:27 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Oct-12 22:22:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 22:22:27 INFO2 take_data: Starting WAPP scan: 828600215 2008-Oct-12 22:22:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 22:22:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 22:22:27 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Oct-12 22:22:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 22:22:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8548.00 2008-Oct-12 22:22:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 22:22:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:22:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:22:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:22:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:22:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:22:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:22:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:22:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:22:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 22:22:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 22:22:29 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Oct-12 22:22:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 22:22:29 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Oct-12 22:22:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 22:22:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 22:22:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 22:22:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 22:22:29 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Oct-12 22:22:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 22:22:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 22:22:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 22:22:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 22:22:29 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Oct-12 22:22:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 22:22:29 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 22:22:29 LOG5 finish_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2008-Oct-12 22:22:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 22:22:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 22:22:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 22:22:29 LOG5 end_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2008-Oct-12 22:22:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2008-Oct-12 22:22:30 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2008-Oct-12 22:22:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:22:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:22:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:22:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:22:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 22:22:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 22:22:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 22:22:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 22:22:30 LOG5 begin_task: Level: (2) ID = <10247> Status = 0 0 0 0 ok 2008-Oct-12 22:22:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 22:22:30 INFO2 take_data: Starting WAPP scan: 828600216 2008-Oct-12 22:22:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 22:22:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 22:22:30 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Oct-12 22:22:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 22:22:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 22:22:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8551.00 2008-Oct-12 22:22:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0011.fits 2008-Oct-12 22:22:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0011.fits} 2008-Oct-12 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:32:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 22:32:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 22:32:31 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Oct-12 22:32:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 22:32:31 LOG5 end_task: Level: (2) ID = <10247> Status = 0 0 0 0 ok 2008-Oct-12 22:32:31 LOG1 fixed_driftmap: New position: year = 2008.785596845134 RA = 23:33:08.9 RA/Dec = 23:33:37.4 +09:17:55.3 2008-Oct-12 22:32:31 NOTE fixed_driftmap: Correcting ZA to 9:03:18.4 ... 2008-Oct-12 22:32:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0551018240 -CF 2008-Oct-12 22:32:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 22:32:31 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 22:32:31 LOG5 begin_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2008-Oct-12 22:32:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 22:32:31 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 22:32:31 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Oct-12 22:32:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 22:32:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 22:32:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 22:32:31 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 22:32:31 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Oct-12 22:32:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0551018240 -CF 2008-Oct-12 22:32:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:32:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 22:32:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 22:32:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:32:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 22:32:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 22:32:31 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Oct-12 22:32:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 22:32:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 22:32:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 22:32:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 22:32:32 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Oct-12 22:32:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:32:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 22:32:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 22:32:32 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2008-Oct-12 22:32:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 22:32:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 22:32:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 22:32:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 22:32:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 22:32:32 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2008-Oct-12 22:32:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 22:32:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 22:32:32 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2008-Oct-12 22:32:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 22:32:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 22:32:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 22:32:32 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Oct-12 22:32:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 22:32:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 22:32:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 22:32:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 22:32:32 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Oct-12 22:32:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 22:32:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 22:32:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 22:32:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 22:32:32 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Oct-12 22:32:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 22:32:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 22:32:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 22:32:32 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Oct-12 22:32:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 22:32:32 INFO2 take_data: Starting WAPP scan: 828600217 2008-Oct-12 22:32:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 22:32:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 22:32:32 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Oct-12 22:32:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 22:32:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9153.00 2008-Oct-12 22:32:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 22:32:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:32:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:32:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:32:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:32:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:32:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:32:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:32:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:32:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 22:32:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 22:32:34 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Oct-12 22:32:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 22:32:34 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Oct-12 22:32:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 22:32:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 22:32:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 22:32:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 22:32:34 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Oct-12 22:32:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 22:32:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 22:32:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 22:32:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 22:32:34 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Oct-12 22:32:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 22:32:34 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 22:32:34 LOG5 finish_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2008-Oct-12 22:32:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 22:32:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 22:32:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 22:32:34 LOG5 end_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2008-Oct-12 22:32:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2008-Oct-12 22:32:34 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2008-Oct-12 22:32:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:32:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:32:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:32:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:32:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 22:32:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 22:32:35 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 22:32:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 22:32:35 LOG5 begin_task: Level: (2) ID = <10258> Status = 0 0 0 0 ok 2008-Oct-12 22:32:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 22:32:35 INFO2 take_data: Starting WAPP scan: 828600218 2008-Oct-12 22:32:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 22:32:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 22:32:35 LOG5 begin_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2008-Oct-12 22:32:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 22:32:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 22:32:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9156.00 2008-Oct-12 22:32:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0012.fits 2008-Oct-12 22:32:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0012.fits} 2008-Oct-12 22:32:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 22:32:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:32:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:32:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:32:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:32:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:32:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:32:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:32:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:35:32 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:35:32.321 (seconds: 81332.321)!} 2008-Oct-12 22:35:32 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:35:32.321 (seconds: 81332.321)! 2008-Oct-12 22:35:33 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 81331.0 to 81332.0! 2008-Oct-12 22:35:34 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (81331.0 - 81333.0)! 2008-Oct-12 22:42:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 22:42:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 22:42:36 LOG5 end_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2008-Oct-12 22:42:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 22:42:36 LOG5 end_task: Level: (2) ID = <10258> Status = 0 0 0 0 ok 2008-Oct-12 22:42:36 LOG1 fixed_driftmap: New position: year = 2008.7856160164272 RA = 23:43:15.5 RA/Dec = 23:43:44.0 +09:17:56.3 2008-Oct-12 22:42:36 NOTE fixed_driftmap: Correcting ZA to 9:03:17.4 ... 2008-Oct-12 22:42:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0548412411 -CF 2008-Oct-12 22:42:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 22:42:36 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 22:42:36 LOG5 begin_task: Level: (2) ID = <10260> Status = 0 0 0 0 ok 2008-Oct-12 22:42:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 22:42:36 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 22:42:36 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Oct-12 22:42:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 22:42:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 22:42:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 22:42:36 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 22:42:36 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Oct-12 22:42:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0548412411 -CF 2008-Oct-12 22:42:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:42:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 22:42:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 22:42:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:42:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 22:42:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 22:42:36 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Oct-12 22:42:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 22:42:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 22:42:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 22:42:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 22:42:36 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Oct-12 22:42:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:42:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 22:42:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 22:42:37 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Oct-12 22:42:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 22:42:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 22:42:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 22:42:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 22:42:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 22:42:37 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2008-Oct-12 22:42:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 22:42:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 22:42:37 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2008-Oct-12 22:42:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 22:42:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 22:42:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 22:42:37 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Oct-12 22:42:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 22:42:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 22:42:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 22:42:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 22:42:37 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Oct-12 22:42:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 22:42:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 22:42:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 22:42:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 22:42:37 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Oct-12 22:42:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 22:42:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 22:42:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 22:42:37 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Oct-12 22:42:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 22:42:37 INFO2 take_data: Starting WAPP scan: 828600219 2008-Oct-12 22:42:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 22:42:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 22:42:37 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Oct-12 22:42:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 22:42:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9758.00 2008-Oct-12 22:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 22:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:42:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 22:42:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 22:42:39 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Oct-12 22:42:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 22:42:39 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Oct-12 22:42:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 22:42:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 22:42:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 22:42:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 22:42:39 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Oct-12 22:42:39 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 22:42:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 22:42:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 22:42:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 22:42:39 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Oct-12 22:42:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 22:42:39 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 22:42:39 LOG5 finish_task: Level: (2) ID = <10260> Status = 0 0 0 0 ok 2008-Oct-12 22:42:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 22:42:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 22:42:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 22:42:39 LOG5 end_task: Level: (2) ID = <10260> Status = 0 0 0 0 ok 2008-Oct-12 22:42:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2008-Oct-12 22:42:39 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2008-Oct-12 22:42:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:42:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:42:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:42:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:42:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 22:42:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 22:42:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 22:42:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 22:42:40 LOG5 begin_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2008-Oct-12 22:42:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 22:42:40 INFO2 take_data: Starting WAPP scan: 828600220 2008-Oct-12 22:42:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 22:42:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 22:42:40 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Oct-12 22:42:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 22:42:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 22:42:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0013.fits 2008-Oct-12 22:42:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9761.00 2008-Oct-12 22:42:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0013.fits} 2008-Oct-12 22:42:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 22:42:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:42:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:42:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:42:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:42:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:42:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:42:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:42:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:52:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 22:52:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 22:52:41 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Oct-12 22:52:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 22:52:41 LOG5 end_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2008-Oct-12 22:52:41 LOG1 fixed_driftmap: New position: year = 2008.7856351877201 RA = 23:53:22.0 RA/Dec = 23:53:50.7 +09:17:56.9 2008-Oct-12 22:52:41 NOTE fixed_driftmap: Correcting ZA to 9:03:16.8 ... 2008-Oct-12 22:52:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0546783918 -CF 2008-Oct-12 22:52:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 22:52:41 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 22:52:41 LOG5 begin_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2008-Oct-12 22:52:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 22:52:41 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 22:52:41 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Oct-12 22:52:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 22:52:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 22:52:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 22:52:41 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 22:52:41 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2008-Oct-12 22:52:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0546783918 -CF 2008-Oct-12 22:52:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:52:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 22:52:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 22:52:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:52:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 22:52:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 22:52:41 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2008-Oct-12 22:52:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 22:52:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 22:52:41 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 22:52:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 22:52:41 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Oct-12 22:52:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 22:52:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 22:52:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 22:52:42 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Oct-12 22:52:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 22:52:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 22:52:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 22:52:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 22:52:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 22:52:42 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Oct-12 22:52:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 22:52:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 22:52:42 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Oct-12 22:52:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 22:52:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 22:52:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 22:52:42 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Oct-12 22:52:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 22:52:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 22:52:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 22:52:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 22:52:42 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Oct-12 22:52:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 22:52:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 22:52:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 22:52:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 22:52:42 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Oct-12 22:52:42 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 22:52:42 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 22:52:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 22:52:42 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Oct-12 22:52:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 22:52:42 INFO2 take_data: Starting WAPP scan: 828600221 2008-Oct-12 22:52:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 22:52:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 22:52:42 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Oct-12 22:52:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 22:52:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10363.00 2008-Oct-12 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:52:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:52:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 22:52:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 22:52:44 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Oct-12 22:52:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 22:52:44 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Oct-12 22:52:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 22:52:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 22:52:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 22:52:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 22:52:44 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Oct-12 22:52:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 22:52:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 22:52:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 22:52:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 22:52:44 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Oct-12 22:52:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 22:52:44 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 22:52:44 LOG5 finish_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2008-Oct-12 22:52:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 22:52:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 22:52:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 22:52:44 LOG5 end_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2008-Oct-12 22:52:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2008-Oct-12 22:52:44 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2008-Oct-12 22:52:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:52:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:52:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:52:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 22:52:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 22:52:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 22:52:45 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 22:52:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 22:52:45 LOG5 begin_task: Level: (2) ID = <10280> Status = 0 0 0 0 ok 2008-Oct-12 22:52:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 22:52:45 INFO2 take_data: Starting WAPP scan: 828600222 2008-Oct-12 22:52:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 22:52:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 22:52:45 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Oct-12 22:52:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 22:52:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 22:52:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10366.00 2008-Oct-12 22:52:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0014.fits 2008-Oct-12 22:52:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0014.fits} 2008-Oct-12 22:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 22:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 22:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 22:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 22:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 22:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:02:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 23:02:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 23:02:46 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Oct-12 23:02:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 23:02:46 LOG5 end_task: Level: (2) ID = <10280> Status = 0 0 0 0 ok 2008-Oct-12 23:02:46 LOG1 fixed_driftmap: New position: year = 2008.7856543590133 RA = 00:03:28.5 RA/Dec = 00:03:57.4 +09:17:57.1 2008-Oct-12 23:02:46 NOTE fixed_driftmap: Correcting ZA to 9:03:16.6 ... 2008-Oct-12 23:02:46 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0546135925 -CF 2008-Oct-12 23:02:46 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 23:02:46 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 23:02:46 LOG5 begin_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2008-Oct-12 23:02:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 23:02:46 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 23:02:46 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Oct-12 23:02:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 23:02:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 23:02:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 23:02:46 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 23:02:46 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2008-Oct-12 23:02:46 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0546135925 -CF 2008-Oct-12 23:02:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:02:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 23:02:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 23:02:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:02:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 23:02:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 23:02:46 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2008-Oct-12 23:02:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 23:02:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 23:02:47 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 23:02:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 23:02:47 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Oct-12 23:02:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:02:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 23:02:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 23:02:47 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Oct-12 23:02:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 23:02:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 23:02:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 23:02:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 23:02:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 23:02:47 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Oct-12 23:02:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 23:02:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 23:02:47 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Oct-12 23:02:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 23:02:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 23:02:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 23:02:47 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Oct-12 23:02:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 23:02:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 23:02:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 23:02:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 23:02:47 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Oct-12 23:02:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 23:02:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 23:02:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 23:02:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 23:02:47 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Oct-12 23:02:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 23:02:47 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 23:02:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 23:02:47 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Oct-12 23:02:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 23:02:47 INFO2 take_data: Starting WAPP scan: 828600223 2008-Oct-12 23:02:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 23:02:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 23:02:47 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Oct-12 23:02:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 23:02:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10968.00 2008-Oct-12 23:02:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 23:02:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:02:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:02:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:02:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:02:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:02:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:02:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:02:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:02:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 23:02:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 23:02:49 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Oct-12 23:02:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 23:02:49 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Oct-12 23:02:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 23:02:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 23:02:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 23:02:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 23:02:49 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2008-Oct-12 23:02:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 23:02:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 23:02:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 23:02:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 23:02:49 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2008-Oct-12 23:02:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 23:02:49 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 23:02:49 LOG5 finish_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2008-Oct-12 23:02:49 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 23:02:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 23:02:49 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 23:02:49 LOG5 end_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2008-Oct-12 23:02:49 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2008-Oct-12 23:02:49 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2008-Oct-12 23:02:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:02:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:02:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:02:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:02:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 23:02:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 23:02:50 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 23:02:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 23:02:50 LOG5 begin_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2008-Oct-12 23:02:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 23:02:50 INFO2 take_data: Starting WAPP scan: 828600224 2008-Oct-12 23:02:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 23:02:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 23:02:50 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Oct-12 23:02:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 23:02:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 23:02:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10971.00 2008-Oct-12 23:02:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0015.fits 2008-Oct-12 23:02:50 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0015.fits} 2008-Oct-12 23:02:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 23:02:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:02:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:02:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:02:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:02:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:02:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:02:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:02:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:12:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 23:12:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 23:12:51 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Oct-12 23:12:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 23:12:51 LOG5 end_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2008-Oct-12 23:12:51 LOG1 fixed_driftmap: New position: year = 2008.7856735303064 RA = 00:13:35.1 RA/Dec = 00:14:04.0 +09:17:57.0 2008-Oct-12 23:12:51 NOTE fixed_driftmap: Correcting ZA to 9:03:16.7 ... 2008-Oct-12 23:12:51 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0546469701 -CF 2008-Oct-12 23:12:51 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 23:12:51 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 23:12:51 LOG5 begin_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2008-Oct-12 23:12:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 23:12:51 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 23:12:51 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Oct-12 23:12:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 23:12:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 23:12:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 23:12:51 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 23:12:51 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2008-Oct-12 23:12:51 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0546469701 -CF 2008-Oct-12 23:12:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:12:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 23:12:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 23:12:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:12:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 23:12:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 23:12:51 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2008-Oct-12 23:12:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 23:12:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 23:12:52 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 23:12:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 23:12:52 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Oct-12 23:12:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:12:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 23:12:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 23:12:52 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Oct-12 23:12:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 23:12:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 23:12:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 23:12:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 23:12:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 23:12:52 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Oct-12 23:12:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 23:12:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 23:12:52 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Oct-12 23:12:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 23:12:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 23:12:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 23:12:52 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Oct-12 23:12:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 23:12:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 23:12:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 23:12:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 23:12:52 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Oct-12 23:12:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 23:12:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 23:12:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 23:12:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 23:12:52 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Oct-12 23:12:52 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 23:12:52 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 23:12:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 23:12:52 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Oct-12 23:12:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 23:12:52 INFO2 take_data: Starting WAPP scan: 828600225 2008-Oct-12 23:12:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 23:12:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 23:12:52 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Oct-12 23:12:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 23:12:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11573.00 2008-Oct-12 23:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 23:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:12:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 23:12:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 23:12:54 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Oct-12 23:12:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 23:12:54 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Oct-12 23:12:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 23:12:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 23:12:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 23:12:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 23:12:54 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Oct-12 23:12:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 23:12:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 23:12:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 23:12:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 23:12:54 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Oct-12 23:12:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 23:12:54 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 23:12:54 LOG5 finish_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2008-Oct-12 23:12:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 23:12:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 23:12:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 23:12:54 LOG5 end_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2008-Oct-12 23:12:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2008-Oct-12 23:12:54 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2008-Oct-12 23:12:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:12:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:12:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:12:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:12:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 23:12:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 23:12:55 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 23:12:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 23:12:55 LOG5 begin_task: Level: (2) ID = <10302> Status = 0 0 0 0 ok 2008-Oct-12 23:12:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 23:12:55 INFO2 take_data: Starting WAPP scan: 828600226 2008-Oct-12 23:12:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 23:12:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 23:12:55 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Oct-12 23:12:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 23:12:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 23:12:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11576.00 2008-Oct-12 23:12:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0016.fits 2008-Oct-12 23:12:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0016.fits} 2008-Oct-12 23:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 23:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:20:29 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 23:20:29.310 (seconds: 84029.310)!} 2008-Oct-12 23:20:29 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 23:20:29.310 (seconds: 84029.310)! 2008-Oct-12 23:20:30 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 84028.0 to 84029.0! 2008-Oct-12 23:20:31 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (84028.0 - 84030.0)! 2008-Oct-12 23:22:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 23:22:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 23:22:56 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Oct-12 23:22:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 23:22:56 LOG5 end_task: Level: (2) ID = <10302> Status = 0 0 0 0 ok 2008-Oct-12 23:22:56 LOG1 fixed_driftmap: New position: year = 2008.7856927015996 RA = 00:23:41.7 RA/Dec = 00:24:10.7 +09:17:56.5 2008-Oct-12 23:22:56 NOTE fixed_driftmap: Correcting ZA to 9:03:17.2 ... 2008-Oct-12 23:22:56 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0547784604 -CF 2008-Oct-12 23:22:56 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 23:22:56 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 23:22:56 LOG5 begin_task: Level: (2) ID = <10304> Status = 0 0 0 0 ok 2008-Oct-12 23:22:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 23:22:56 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 23:22:56 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Oct-12 23:22:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 23:22:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 23:22:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 23:22:56 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 23:22:56 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2008-Oct-12 23:22:56 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0547784604 -CF 2008-Oct-12 23:22:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:22:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 23:22:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 23:22:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:22:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 23:22:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 23:22:56 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2008-Oct-12 23:22:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 23:22:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 23:22:56 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 23:22:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 23:22:56 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2008-Oct-12 23:22:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:22:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 23:22:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 23:22:57 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2008-Oct-12 23:22:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 23:22:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 23:22:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 23:22:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 23:22:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 23:22:57 LOG5 begin_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2008-Oct-12 23:22:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 23:22:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 23:22:57 LOG5 end_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2008-Oct-12 23:22:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 23:22:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 23:22:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 23:22:57 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Oct-12 23:22:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 23:22:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 23:22:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 23:22:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 23:22:57 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2008-Oct-12 23:22:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 23:22:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 23:22:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 23:22:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 23:22:57 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2008-Oct-12 23:22:57 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 23:22:57 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 23:22:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 23:22:57 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Oct-12 23:22:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 23:22:57 INFO2 take_data: Starting WAPP scan: 828600227 2008-Oct-12 23:22:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 23:22:57 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 23:22:57 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Oct-12 23:22:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 23:22:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12178.00 2008-Oct-12 23:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 23:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:22:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 23:22:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 23:22:59 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Oct-12 23:22:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 23:22:59 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Oct-12 23:22:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 23:22:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 23:22:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 23:22:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 23:22:59 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-Oct-12 23:22:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 23:22:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 23:22:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 23:22:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 23:22:59 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-Oct-12 23:22:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 23:22:59 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 23:22:59 LOG5 finish_task: Level: (2) ID = <10304> Status = 0 0 0 0 ok 2008-Oct-12 23:22:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 23:22:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 23:22:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 23:22:59 LOG5 end_task: Level: (2) ID = <10304> Status = 0 0 0 0 ok 2008-Oct-12 23:22:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2008-Oct-12 23:22:59 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2008-Oct-12 23:22:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:22:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:22:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:22:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:23:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 23:23:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 23:23:00 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 23:23:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 23:23:00 LOG5 begin_task: Level: (2) ID = <10313> Status = 0 0 0 0 ok 2008-Oct-12 23:23:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 23:23:00 INFO2 take_data: Starting WAPP scan: 828600228 2008-Oct-12 23:23:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 23:23:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 23:23:00 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Oct-12 23:23:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 23:23:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 23:23:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12181.00 2008-Oct-12 23:23:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0017.fits 2008-Oct-12 23:23:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0017.fits} 2008-Oct-12 23:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 23:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:23:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:33:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 23:33:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 23:33:01 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Oct-12 23:33:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 23:33:01 LOG5 end_task: Level: (2) ID = <10313> Status = 0 0 0 0 ok 2008-Oct-12 23:33:01 LOG1 fixed_driftmap: New position: year = 2008.7857118728928 RA = 00:33:48.2 RA/Dec = 00:34:17.3 +09:17:55.7 2008-Oct-12 23:33:01 NOTE fixed_driftmap: Correcting ZA to 9:03:18.0 ... 2008-Oct-12 23:33:01 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0550078089 -CF 2008-Oct-12 23:33:01 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 23:33:01 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 23:33:01 LOG5 begin_task: Level: (2) ID = <10315> Status = 0 0 0 0 ok 2008-Oct-12 23:33:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 23:33:01 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 23:33:01 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Oct-12 23:33:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 23:33:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 23:33:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 23:33:01 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 23:33:01 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2008-Oct-12 23:33:01 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0550078089 -CF 2008-Oct-12 23:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:33:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 23:33:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 23:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:33:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 23:33:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 23:33:01 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2008-Oct-12 23:33:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 23:33:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 23:33:01 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 23:33:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 23:33:01 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2008-Oct-12 23:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:33:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 23:33:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 23:33:02 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2008-Oct-12 23:33:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 23:33:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 23:33:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 23:33:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 23:33:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 23:33:02 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2008-Oct-12 23:33:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 23:33:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 23:33:02 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2008-Oct-12 23:33:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 23:33:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 23:33:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 23:33:02 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Oct-12 23:33:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 23:33:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 23:33:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 23:33:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 23:33:02 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-Oct-12 23:33:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 23:33:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 23:33:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 23:33:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 23:33:02 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-Oct-12 23:33:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 23:33:02 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 23:33:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 23:33:02 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Oct-12 23:33:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 23:33:02 INFO2 take_data: Starting WAPP scan: 828600229 2008-Oct-12 23:33:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 23:33:02 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 23:33:02 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Oct-12 23:33:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 23:33:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12783.00 2008-Oct-12 23:33:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 23:33:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:33:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:33:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:33:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:33:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:33:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:33:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:33:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:33:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 23:33:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 23:33:04 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Oct-12 23:33:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 23:33:04 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Oct-12 23:33:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 23:33:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 23:33:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 23:33:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 23:33:04 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2008-Oct-12 23:33:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 23:33:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 23:33:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 23:33:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 23:33:04 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2008-Oct-12 23:33:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 23:33:04 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 23:33:04 LOG5 finish_task: Level: (2) ID = <10315> Status = 0 0 0 0 ok 2008-Oct-12 23:33:04 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 23:33:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 23:33:04 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 23:33:04 LOG5 end_task: Level: (2) ID = <10315> Status = 0 0 0 0 ok 2008-Oct-12 23:33:04 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2008-Oct-12 23:33:04 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2008-Oct-12 23:33:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:33:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:33:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:33:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:33:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 23:33:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 23:33:05 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 23:33:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 23:33:05 LOG5 begin_task: Level: (2) ID = <10324> Status = 0 0 0 0 ok 2008-Oct-12 23:33:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 23:33:05 INFO2 take_data: Starting WAPP scan: 828600230 2008-Oct-12 23:33:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 23:33:05 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 23:33:05 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Oct-12 23:33:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 23:33:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 23:33:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12786.00 2008-Oct-12 23:33:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0018.fits 2008-Oct-12 23:33:05 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0018.fits} 2008-Oct-12 23:33:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 23:33:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:33:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:33:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:33:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:33:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:33:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:33:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:33:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:35:28 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 23:35:28.300 (seconds: 84928.300)!} 2008-Oct-12 23:35:28 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 23:35:28.300 (seconds: 84928.300)! 2008-Oct-12 23:35:29 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 84927.0 to 84928.0! 2008-Oct-12 23:35:30 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (84927.0 - 84929.0)! 2008-Oct-12 23:43:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 23:43:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 23:43:06 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Oct-12 23:43:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 23:43:06 LOG5 end_task: Level: (2) ID = <10324> Status = 0 0 0 0 ok 2008-Oct-12 23:43:06 LOG1 fixed_driftmap: New position: year = 2008.7857310441859 RA = 00:43:54.8 RA/Dec = 00:44:24.0 +09:17:54.5 2008-Oct-12 23:43:06 NOTE fixed_driftmap: Correcting ZA to 9:03:19.2 ... 2008-Oct-12 23:43:06 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0553345682 -CF 2008-Oct-12 23:43:06 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 23:43:06 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 23:43:06 LOG5 begin_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2008-Oct-12 23:43:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 23:43:06 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 23:43:06 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-Oct-12 23:43:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 23:43:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 23:43:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 23:43:06 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 23:43:06 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2008-Oct-12 23:43:06 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0553345682 -CF 2008-Oct-12 23:43:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:43:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 23:43:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 23:43:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:43:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 23:43:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 23:43:06 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2008-Oct-12 23:43:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 23:43:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 23:43:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 23:43:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 23:43:07 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2008-Oct-12 23:43:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 23:43:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 23:43:07 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2008-Oct-12 23:43:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 23:43:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 23:43:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 23:43:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 23:43:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 23:43:07 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2008-Oct-12 23:43:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:43:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 23:43:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 23:43:07 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2008-Oct-12 23:43:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 23:43:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 23:43:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 23:43:07 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-Oct-12 23:43:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 23:43:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 23:43:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 23:43:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 23:43:07 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2008-Oct-12 23:43:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 23:43:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 23:43:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 23:43:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 23:43:07 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2008-Oct-12 23:43:07 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 23:43:07 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 23:43:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 23:43:07 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Oct-12 23:43:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 23:43:07 INFO2 take_data: Starting WAPP scan: 828600231 2008-Oct-12 23:43:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 23:43:07 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 23:43:07 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Oct-12 23:43:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 23:43:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13388.00 2008-Oct-12 23:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 23:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:43:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 23:43:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 23:43:09 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Oct-12 23:43:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 23:43:09 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Oct-12 23:43:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 23:43:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 23:43:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 23:43:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 23:43:09 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2008-Oct-12 23:43:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 23:43:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-12 23:43:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 23:43:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 23:43:09 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2008-Oct-12 23:43:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-12 23:43:09 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-12 23:43:09 LOG5 finish_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2008-Oct-12 23:43:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-12 23:43:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-12 23:43:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-12 23:43:09 LOG5 end_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2008-Oct-12 23:43:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2008-Oct-12 23:43:09 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2008-Oct-12 23:43:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:43:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:43:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:43:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kelley Hess, M. Jacquart 2008-Oct-12 23:43:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-12 23:43:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-12 23:43:10 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-12 23:43:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 23:43:10 LOG5 begin_task: Level: (2) ID = <10335> Status = 0 0 0 0 ok 2008-Oct-12 23:43:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 23:43:10 INFO2 take_data: Starting WAPP scan: 828600232 2008-Oct-12 23:43:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-12 23:43:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 23:43:10 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Oct-12 23:43:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kelley Hess, M. Jacquart' 2008-Oct-12 23:43:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 23:43:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13391.00 2008-Oct-12 23:43:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20081012.a2010.0019.fits 2008-Oct-12 23:43:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081012.a2010.0019.fits} 2008-Oct-12 23:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 23:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:43:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:50:27 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 23:50:27.300 (seconds: 85827.300)!} 2008-Oct-12 23:50:27 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 23:50:27.300 (seconds: 85827.300)! 2008-Oct-12 23:50:28 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 85826.0 to 85827.0! 2008-Oct-12 23:50:29 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (85826.0 - 85828.0)! 2008-Oct-12 23:53:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 23:53:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 23:53:11 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Oct-12 23:53:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 23:53:11 LOG5 end_task: Level: (2) ID = <10335> Status = 0 0 0 0 ok 2008-Oct-12 23:53:11 LOG1 fixed_driftmap: New position: year = 2008.7857502154789 RA = 00:54:01.3 RA/Dec = 00:54:30.7 +09:17:53.0 2008-Oct-12 23:53:11 NOTE fixed_driftmap: Correcting ZA to 9:03:20.7 ... 2008-Oct-12 23:53:11 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.0557581075 -CF 2008-Oct-12 23:53:11 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-12 23:53:11 START begin_task: Starting task 'WAPP calibration' 2008-Oct-12 23:53:11 LOG5 begin_task: Level: (2) ID = <10337> Status = 0 0 0 0 ok 2008-Oct-12 23:53:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-12 23:53:11 START begin_task: Starting task 'selecting calibration type' 2008-Oct-12 23:53:11 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Oct-12 23:53:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-12 23:53:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-12 23:53:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 23:53:11 START begin_task: Starting task 'waiting on setcal' 2008-Oct-12 23:53:11 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2008-Oct-12 23:53:11 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.0557581075 -CF 2008-Oct-12 23:53:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:53:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-12 23:53:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-12 23:53:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:53:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-12 23:53:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-12 23:53:11 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2008-Oct-12 23:53:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-12 23:53:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 23:53:11 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-12 23:53:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 23:53:11 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Oct-12 23:53:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-12 23:53:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 23:53:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 23:53:12 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2008-Oct-12 23:53:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 23:53:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-12 23:53:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-12 23:53:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-12 23:53:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-12 23:53:12 LOG5 begin_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2008-Oct-12 23:53:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-12 23:53:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-12 23:53:12 LOG5 end_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2008-Oct-12 23:53:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-12 23:53:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-12 23:53:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-12 23:53:12 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Oct-12 23:53:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-12 23:53:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-12 23:53:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-12 23:53:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-12 23:53:12 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Oct-12 23:53:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-12 23:53:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-12 23:53:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-12 23:53:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-12 23:53:12 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Oct-12 23:53:12 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-12 23:53:12 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-12 23:53:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-12 23:53:12 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Oct-12 23:53:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-12 23:53:12 INFO2 take_data: Starting WAPP scan: 828600233 2008-Oct-12 23:53:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-12 23:53:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-12 23:53:12 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Oct-12 23:53:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-12 23:53:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13993.00 2008-Oct-12 23:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-12 23:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2250.000000 MHz 2008-Oct-12 23:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2008-Oct-12 23:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2008-Oct-12 23:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1650.000000 MHz 2008-Oct-12 23:53:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-12 23:53:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-12 23:53:14 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Oct-12 23:53:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-12 23:53:14 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Oct-12 23:53:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-12 23:53:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-12 23:53:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-12 23:53:14 START begin_task: Star