2008-Oct-11 21:19:33 BEGIN executive: CIMA executive starting ... 2008-Oct-11 21:19:33 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-11 21:19:33 INFO1 executive: Using CIMA version 3.0.04 'next' from 2008-09-30 18:33 2008-Oct-11 21:19:33 INFO4 executive: This is an ON-LINE session 2008-Oct-11 21:19:33 INFO4 executive: This is a REMOTE session 2008-Oct-11 21:19:33 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-11 21:19:33 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Ann Martin' 2008-Oct-11 21:19:34 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081011' 2008-Oct-11 21:19:35 LOG2 log_preferences: Currently applied preferences: 2008-Oct-11 21:19:35 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-11 21:19:35 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-11 21:19:35 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-11 21:19:35 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-11 21:19:35 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-11 21:19:35 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-11 21:19:35 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-11 21:19:35 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-11 21:19:35 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-11 21:19:35 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-11 21:19:35 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-11 21:19:35 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-11 21:19:35 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-11 21:19:35 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-11 21:19:35 ALERT executive: CIMA executive ready 2008-Oct-11 21:19:37 NOTE frontend: CIMA frontend ready 2008-Oct-11 21:19:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:19:39 LOG4 got_cormsg: From DATATAKING: setup 2008-Oct-11 21:19:40 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-11 21:19:40 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-11 21:19:40 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-11 21:19:40 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-11 21:19:40 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-11 21:19:40 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-11 21:19:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-11 21:19:40 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-11 21:19:40 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-11 21:19:40 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-11 21:19:40 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-11 21:19:40 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-11 21:19:40 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-11 21:19:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-11 21:19:40 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-11 21:19:40 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Oct-11 21:19:46 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-11 21:19:46 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:19:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:19:47 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-11 21:19:47 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-11 21:19:47 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-11 21:19:47 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-11 21:19:47 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-11 21:19:47 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-11 21:19:47 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-11 21:19:47 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-11 21:19:47 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-11 21:19:47 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-11 21:19:50 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-11 21:19:50 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-11 21:19:50 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-11 21:19:50 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-11 21:19:53 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2008-Oct-11 21:20:57 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-11 21:20:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-11 21:20:59 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-11 21:20:59 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-11 21:20:59 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-11 21:20:59 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-11 21:20:59 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-11 21:20:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-11 21:20:59 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-11 21:20:59 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-11 21:20:59 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-11 21:20:59 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-11 21:20:59 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-11 21:20:59 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-11 21:20:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-11 21:20:59 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-11 21:21:00 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-11 21:21:00 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-11 21:21:00 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-11 21:21:00 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-11 21:21:00 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-11 21:21:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-11 21:21:00 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-11 21:21:00 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-11 21:21:00 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-11 21:21:00 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-11 21:21:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 63.4 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2008-Oct-11 21:21:00 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2008-Oct-11 21:21:00 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-11 21:21:00 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-11 21:21:00 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-11 21:21:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:21:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:21:59 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2008-Oct-11 21:21:59 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-11 21:21:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2008-Oct-11 21:21:59 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-11 21:21:59 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-11 21:21:59 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-11 21:21:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-11 21:21:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-11 21:21:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-11 21:21:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-11 21:21:59 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-11 21:21:59 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-11 21:21:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-11 21:21:59 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-11 21:21:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-11 21:21:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-11 21:21:59 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-11 21:21:59 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-11 21:21:59 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-11 21:21:59 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-11 21:21:59 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-11 21:21:59 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-11 21:21:59 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-11 21:21:59 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-11 21:21:59 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-11 21:21:59 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-11 21:21:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-11 21:21:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-11 21:21:59 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-11 21:21:59 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-11 21:21:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-11 21:22:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-11 21:22:12 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-11 21:22:12 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-11 21:22:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-11 21:22:12 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-11 21:22:12 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-11 21:22:12 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-11 21:22:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-11 21:22:12 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-11 21:22:12 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-11 21:22:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-11 21:22:13 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-11 21:22:13 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-11 21:22:13 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-11 21:22:13 LOG5 begin_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-11 21:22:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-11 21:22:13 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-11 21:22:13 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-11 21:22:13 START begin_task: Starting task 'selecting calibration port' 2008-Oct-11 21:22:13 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-11 21:22:13 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-11 21:22:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-11 21:22:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-11 21:22:13 START begin_task: Starting task 'waiting on calport' 2008-Oct-11 21:22:13 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-11 21:22:13 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-11 21:22:13 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-11 21:22:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-11 21:22:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-11 21:22:13 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-11 21:22:13 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-11 21:22:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-11 21:22:13 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-11 21:22:13 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-11 21:22:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-11 21:22:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-11 21:22:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-11 21:22:13 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-11 21:22:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-11 21:22:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-11 21:22:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-11 21:22:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-11 21:22:13 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-11 21:22:13 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-11 21:22:13 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-11 21:22:14 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-11 21:22:14 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-11 21:22:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-11 21:22:14 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-11 21:22:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-11 21:22:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-11 21:22:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-11 21:22:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-11 21:22:14 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-11 21:22:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-11 21:22:14 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-11 21:22:14 LOG5 finish_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-11 21:22:14 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-11 21:22:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-11 21:22:14 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-11 21:22:14 LOG5 end_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-11 21:22:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-11 21:22:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-11 21:22:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-11 21:22:14 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-11 21:22:14 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-11 21:22:14 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-11 21:22:15 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-11 21:22:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-11 21:22:15 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-11 21:22:15 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-11 21:22:15 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-11 21:22:15 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-11 21:22:15 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-11 21:22:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-11 21:22:15 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-11 21:22:15 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-11 21:22:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-11 21:22:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20081011.a2010.0000.fits 2008-Oct-11 21:22:15 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081011.a2010.0000.fits} 2008-Oct-11 21:22:15 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-11 21:22:15 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-11 21:22:16 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-11 21:22:44 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-11 21:22:44 LOG4 exec_msg: From OBSERVER: track_new_source drift39p2 222600.0 +092924 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-11 21:22:44 LOG1 track_new_source: Calling 'track_new_source drift39p2 222600.0 +092924 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-11 21:22:44 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-11 21:22:44 LOG5 begin_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-11 21:22:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift39p2} INFO {Selecting source 'drift39p2' ...} 2008-Oct-11 21:22:44 LOG3 track_source: Calling 'track_source drift39p2 222600.0 +092924 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-11 21:22:44 START begin_task: Starting task 'sending tracking commands' 2008-Oct-11 21:22:44 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-11 21:22:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift39p2} INFO {Slewing to source 'drift39p2' ...} 2008-Oct-11 21:22:44 INFO1 track_source: Starting to track drift39p2 2008-Oct-11 21:22:44 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-11 21:22:44 LOG3 vw_send: To DATATAKING: set ra 222600.0 2008-Oct-11 21:22:44 LOG3 vw_send: To DATATAKING: set dec +092924 2008-Oct-11 21:22:44 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-11 21:22:44 LOG3 vw_send: To DATATAKING: pnt tr 222600.0 +092924 -CJ 2008-Oct-11 21:22:44 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-11 21:22:44 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-11 21:22:44 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-11 21:22:44 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-11 21:22:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-11 21:22:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-11 21:22:44 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-11 21:22:44 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-11 21:22:44 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-11 21:22:44 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-11 21:22:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-11 21:22:45 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-11 21:22:45 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-11 21:22:45 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-11 21:22:45 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-11 21:22:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-11 21:22:45 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-11 21:22:45 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-11 21:22:45 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-11 21:22:45 LOG5 finish_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-11 21:22:45 DONE finish_task: DONE finished selecting: new source 2008-Oct-11 21:22:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-11 21:22:45 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-11 21:22:45 LOG5 end_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-11 21:22:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-11 21:22:45 LOG4 got_cormsg: From DATATAKING: set ra 222600.0 2008-Oct-11 21:22:45 LOG4 got_cormsg: From DATATAKING: set dec +092924 2008-Oct-11 21:22:45 LOG4 got_cormsg: From DATATAKING: vw% 222600.0 2008-Oct-11 21:22:45 LOG4 got_cormsg: From DATATAKING: vw% +092924 2008-Oct-11 21:22:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-11 21:22:45 LOG4 got_cormsg: From DATATAKING: pnt tr 222600.0 +092924 -CJ 2008-Oct-11 21:22:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-11 21:22:45 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-11 21:22:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:22:45 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-11 21:22:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:25:52 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-11 21:25:52 LOG4 exec_msg: From OBSERVER: track_new_source drift39p2 222300.0 +092924 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-11 21:25:52 LOG1 track_new_source: Calling 'track_new_source drift39p2 222300.0 +092924 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-11 21:25:52 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-11 21:25:52 LOG5 begin_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-11 21:25:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift39p2} INFO {Selecting source 'drift39p2' ...} 2008-Oct-11 21:25:52 LOG3 track_source: Calling 'track_source drift39p2 222300.0 +092924 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-11 21:25:52 START begin_task: Starting task 'sending tracking commands' 2008-Oct-11 21:25:52 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-11 21:25:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift39p2} INFO {Slewing to source 'drift39p2' ...} 2008-Oct-11 21:25:52 INFO1 track_source: Starting to track drift39p2 2008-Oct-11 21:25:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-11 21:25:52 LOG3 vw_send: To DATATAKING: set ra 222300.0 2008-Oct-11 21:25:52 LOG3 vw_send: To DATATAKING: set dec +092924 2008-Oct-11 21:25:52 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-11 21:25:52 LOG3 vw_send: To DATATAKING: pnt tr 222300.0 +092924 -CJ 2008-Oct-11 21:25:52 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-11 21:25:52 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-11 21:25:52 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-11 21:25:52 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-11 21:25:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-11 21:25:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-11 21:25:52 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-11 21:25:52 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-11 21:25:52 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-11 21:25:52 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-11 21:25:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-11 21:25:52 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-11 21:25:52 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-11 21:25:52 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-11 21:25:52 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-11 21:25:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-11 21:25:52 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-11 21:25:52 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-11 21:25:52 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-11 21:25:52 LOG5 finish_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-11 21:25:52 DONE finish_task: DONE finished selecting: new source 2008-Oct-11 21:25:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-11 21:25:53 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-11 21:25:53 LOG5 end_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-11 21:25:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-11 21:25:53 LOG4 got_cormsg: From DATATAKING: set ra 222300.0 2008-Oct-11 21:25:53 LOG4 got_cormsg: From DATATAKING: set dec +092924 2008-Oct-11 21:25:53 LOG4 got_cormsg: From DATATAKING: vw% 222300.0 2008-Oct-11 21:25:53 LOG4 got_cormsg: From DATATAKING: vw% +092924 2008-Oct-11 21:25:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:25:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-11 21:25:53 LOG4 got_cormsg: From DATATAKING: pnt tr 222300.0 +092924 -CJ 2008-Oct-11 21:25:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-11 21:25:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-11 21:25:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:25:53 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-11 21:25:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:25:59 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2008-Oct-11 21:25:59 LOG4 exec_msg: From OBSERVER: new_file manual 2008-Oct-11 21:25:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-11 21:25:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-11 21:25:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-11 21:25:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-11 21:25:59 NOTE new_file: There is no need to start a new FITS-file since the current one 'wapp.20081011.a2010.0000.fits' is empty! 2008-Oct-11 21:26:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-11 21:26:16 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-11 21:26:16 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-11 21:26:16 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-11 21:26:16 LOG5 begin_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-11 21:26:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-11 21:26:16 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-11 21:26:16 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-11 21:26:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-11 21:26:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-11 21:26:16 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-11 21:26:16 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-11 21:26:16 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-11 21:26:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-11 21:26:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:26:19 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-11 21:26:19 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-11 21:26:19 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-11 21:26:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-11 21:26:19 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-11 21:26:19 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-11 21:26:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-11 21:26:19 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-11 21:26:19 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-11 21:26:19 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-11 21:26:19 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-11 21:26:19 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-11 21:26:19 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-11 21:26:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-11 21:26:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:26:19 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-11 21:26:19 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 5 5 dB 2008-Oct-11 21:26:19 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2008-Oct-11 21:26:19 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 1 2 dB 2008-Oct-11 21:26:19 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-11 21:26:19 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-11 21:26:19 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-11 21:26:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.098 0.952 ALFA beam 1: 0.921 0.916 2008-Oct-11 21:26:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.037 0.986 ALFA beam 3: 0.888 0.872 2008-Oct-11 21:26:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.071 1.085 ALFA beam 5: 0.914 0.898 2008-Oct-11 21:26:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.972 0.912 ALFA beam 7: 1.080 1.012 2008-Oct-11 21:26:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-11 21:26:19 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-11 21:26:19 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Oct-11 21:26:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-11 21:26:20 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-11 21:26:20 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-11 21:26:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-11 21:26:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-11 21:26:20 LOG5 finish_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-11 21:26:20 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-11 21:26:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-11 21:26:20 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-11 21:26:20 LOG5 end_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-11 21:26:25 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Oct-11 21:26:25 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift39p2 222300.0 +092924 J 0 Topocentric velocity(optical) 2008-Oct-11 21:26:25 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift39p2 222300.0 +092924 J 0 Topocentric velocity(optical)' 2008-Oct-11 21:26:25 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Oct-11 21:26:25 LOG5 begin_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-11 21:26:25 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift39p2' 2008-Oct-11 21:26:25 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Oct-11 21:26:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift39p2} 2008-Oct-11 21:26:25 INFO5 fixed_driftmap: Start: year = 2008.7827332877025 RA = 22:23:27.6 Dec = +09:32:15.4 2008-Oct-11 21:26:25 NOTE fixed_driftmap: Setting ZA to 8:48:58.3 ... 2008-Oct-11 21:26:25 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 8.82 2008-Oct-11 21:26:25 LOG3 track_source: Calling 'track_source drift39p2 360.0 8.8161925317 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Oct-11 21:26:25 START begin_task: Starting task 'sending tracking commands' 2008-Oct-11 21:26:25 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-11 21:26:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift39p2} INFO {Slewing to source 'drift39p2' ...} 2008-Oct-11 21:26:25 INFO1 track_source: Starting to track drift39p2 2008-Oct-11 21:26:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-11 21:26:25 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Oct-11 21:26:25 LOG3 vw_send: To DATATAKING: set dec 8.8161925317 2008-Oct-11 21:26:25 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-11 21:26:25 LOG3 vw_send: To DATATAKING: pnt tr 360.0 8.8161925317 -CF 2008-Oct-11 21:26:25 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-11 21:26:25 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-11 21:26:25 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-11 21:26:25 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-11 21:26:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-11 21:26:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-11 21:26:25 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-11 21:26:25 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-11 21:26:25 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-11 21:26:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-11 21:26:25 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-11 21:26:25 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Oct-11 21:26:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-11 21:26:25 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-11 21:26:25 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-11 21:26:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift39p2" 2008-Oct-11 21:26:25 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Oct-11 21:26:25 LOG4 got_cormsg: From DATATAKING: set dec 8.8161925317 2008-Oct-11 21:26:25 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Oct-11 21:26:25 LOG4 got_cormsg: From DATATAKING: vw% 8.8161925317 2008-Oct-11 21:26:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:26:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-11 21:26:25 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 8.8161925317 -CF 2008-Oct-11 21:26:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-11 21:26:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-11 21:26:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:26:26 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-11 21:26:26 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-11 21:26:26 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-11 21:26:26 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-11 21:26:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-11 21:26:26 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-11 21:26:26 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-11 21:26:26 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-11 21:26:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-11 21:26:26 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-11 21:26:26 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-11 21:26:26 START begin_task: Starting task 'waiting on telescope' 2008-Oct-11 21:26:26 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-11 21:26:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-11 21:26:26 LOG3 waittrk: Start waittrk 5 2008-Oct-11 21:26:26 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-11 21:26:26 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-11 21:26:31 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-11 21:26:31 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-11 21:26:31 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-11 21:26:31 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-11 21:26:32 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-11 21:26:32 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-11 21:26:32 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-11 21:26:32 INFO2 waittrk: Now tracking drift39p2 2008-Oct-11 21:26:32 LOG4 waittrk: Current telescope position: Az = 359.63 ZA = 8.78 2008-Oct-11 21:26:32 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-11 21:26:32 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-11 21:26:32 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Oct-11 21:26:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-11 21:26:32 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-11 21:26:32 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-11 21:26:32 START begin_task: Starting task 'selecting calibration type' 2008-Oct-11 21:26:32 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-11 21:26:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-11 21:26:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-11 21:26:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-11 21:26:33 START begin_task: Starting task 'waiting on setcal' 2008-Oct-11 21:26:33 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-11 21:26:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-11 21:26:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-11 21:26:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:26:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-11 21:26:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-11 21:26:33 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-11 21:26:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-11 21:26:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-11 21:26:33 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-11 21:26:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-11 21:26:33 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-11 21:26:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:26:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-11 21:26:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-11 21:26:33 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-11 21:26:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-11 21:26:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-11 21:26:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-11 21:26:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-11 21:26:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-11 21:26:33 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-11 21:26:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-11 21:26:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-11 21:26:33 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-11 21:26:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-11 21:26:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-11 21:26:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-11 21:26:33 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-11 21:26:33 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Oct-11 21:26:33 INFO3 dopset_later: Setting Doppler correction now 2008-Oct-11 21:26:33 LOG5 antvel: Calling 'antvel 360.000000 8.816193 F 0' 2008-Oct-11 21:26:33 LOG2 antvel: Transforming current Az = 360.00 ZA = 8.82 to apparent RA = 22:23:31.3 Dec = +09:32:15.4 2008-Oct-11 21:26:33 LOG2 antvel: Parameters to Doppler: Topocentric 91593 2008 285 0.0 2008-Oct-11 21:26:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-11 21:26:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-11 21:26:33 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-11 21:26:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-11 21:26:33 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-11 21:26:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-11 21:26:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-11 21:26:33 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-11 21:26:33 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-11 21:26:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-11 21:26:33 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-11 21:26:33 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-11 21:26:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-11 21:26:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-11 21:26:33 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-11 21:26:33 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-11 21:26:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-11 21:26:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-11 21:26:33 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-11 21:26:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-11 21:26:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:26:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:26:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:26:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-11 21:26:36 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-11 21:26:36 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-11 21:26:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-11 21:26:36 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-11 21:26:36 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-11 21:26:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-11 21:26:36 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-11 21:26:36 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-11 21:26:36 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-11 21:26:36 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-11 21:26:36 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-11 21:26:36 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-11 21:26:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-11 21:26:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-11 21:26:37 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-11 21:26:37 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 5 5 dB 2008-Oct-11 21:26:37 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 2 dB 2008-Oct-11 21:26:37 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 1 2 dB 2008-Oct-11 21:26:37 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-11 21:26:37 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-11 21:26:37 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-11 21:26:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.099 0.957 ALFA beam 1: 0.919 0.916 2008-Oct-11 21:26:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.036 1.009 ALFA beam 3: 0.900 1.114 2008-Oct-11 21:26:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.088 1.111 ALFA beam 5: 0.920 0.895 2008-Oct-11 21:26:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.988 0.934 ALFA beam 7: 1.090 1.035 2008-Oct-11 21:26:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-11 21:26:37 LOG5 finish_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-11 21:26:37 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-11 21:26:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-11 21:26:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-11 21:26:37 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-11 21:26:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-11 21:26:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-11 21:26:37 LOG5 finish_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-11 21:26:37 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-11 21:26:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-11 21:26:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-11 21:26:37 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-11 21:26:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-11 21:26:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-11 21:26:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-11 21:26:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-11 21:26:37 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081011.a2010.0000.fits' is empty! 2008-Oct-11 21:26:37 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 22:23:27.6 LST = 22:23:34.4 diff = -6.7 secs 2008-Oct-11 21:26:37 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Oct-11 21:26:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Oct-11 21:26:37 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-11 21:26:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-11 21:26:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-11 21:26:37 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-11 21:26:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-11 21:26:37 LOG5 begin_task: Level: (2) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-11 21:26:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-11 21:26:37 INFO2 take_data: Starting WAPP scan: 828500162 2008-Oct-11 21:26:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-11 21:26:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-11 21:26:38 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-11 21:26:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-11 21:26:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-11 21:26:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5199.00 2008-Oct-11 21:26:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-11 21:26:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1685.000000 MHz 2008-Oct-11 21:26:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1785.000000 MHz 2008-Oct-11 21:26:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2008-Oct-11 21:26:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1985.000000 MHz 2008-Oct-11 21:26:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1685.000000 MHz 2008-Oct-11 21:26:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1785.000000 MHz 2008-Oct-11 21:26:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2008-Oct-11 21:26:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1985.000000 MHz 2008-Oct-11 21:26:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:26:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:26:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:26:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:26:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:26:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:26:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:26:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:26:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:26:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:26:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:26:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:26:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:26:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:26:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:26:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:26:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:26:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:26:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:26:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:27:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:27:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:27:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:27:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:27:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:27:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:27:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:27:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:27:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:27:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:27:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:27:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:27:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:27:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:27:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:27:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:27:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:28:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:28:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-11 21:28:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-11 21:28:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-11 21:28:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:28:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:28:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:28:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:28:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-11 21:28:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:28:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-11 21:28:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:28:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-11 21:28:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:28:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:28:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-11 21:29:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:29:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:29:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-11 21:29:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:29:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:29:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-11 21:29:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:29:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:29:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:29:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:29:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:29:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-11 21:29:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:29:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:29:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:29:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-11 21:29:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-11 21:29:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:29:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:29:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:29:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:29:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:29:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-11 21:30:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-11 21:30:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-11 21:30:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-11 21:30:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-11 21:30:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-11 21:30:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:30:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-11 21:30:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-11 21:30:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-11 21:30:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-11 21:30:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-11 21:30:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:30:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:30:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:30:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:31:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-11 21:31:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:31:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-11 21:31:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:31:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-11 21:31:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 5 (99999966 != 99999967)! 2008-Oct-11 21:31:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:31:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999967)! 2008-Oct-11 21:31:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-11 21:31:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-11 21:31:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:31:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:31:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:31:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-11 21:31:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:31:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:31:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:31:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:31:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:31:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:31:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-11 21:31:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:31:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-11 21:31:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:31:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:31:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:31:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:31:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:31:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:31:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:31:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:31:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:32:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-11 21:32:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-11 21:32:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-11 21:32:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-11 21:32:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-11 21:32:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:32:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:32:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:32:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-11 21:32:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:33:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:33:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:33:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:33:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-11 21:33:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:33:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:33:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:33:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:33:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:33:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-11 21:33:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:33:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:33:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-11 21:33:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-11 21:33:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)