2008-Oct-08 21:22:22 BEGIN executive: CIMA executive starting ... 2008-Oct-08 21:22:22 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-08 21:22:22 INFO1 executive: Using CIMA version 3.0.04 'next' from 2008-09-30 18:33 2008-Oct-08 21:22:22 INFO4 executive: This is an ON-LINE session 2008-Oct-08 21:22:22 INFO4 executive: This is a REMOTE session 2008-Oct-08 21:22:22 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-08 21:22:22 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Ann Martin' 2008-Oct-08 21:22:22 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081008' 2008-Oct-08 21:22:23 LOG2 log_preferences: Currently applied preferences: 2008-Oct-08 21:22:23 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-08 21:22:23 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-08 21:22:23 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-08 21:22:23 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-08 21:22:23 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-08 21:22:23 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-08 21:22:23 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-08 21:22:23 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-08 21:22:23 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-08 21:22:23 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-08 21:22:23 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-08 21:22:23 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-08 21:22:23 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-08 21:22:23 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-08 21:22:23 ALERT executive: CIMA executive ready 2008-Oct-08 21:22:25 NOTE frontend: CIMA frontend ready 2008-Oct-08 21:22:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:22:26 LOG4 got_cormsg: From DATATAKING: setup 2008-Oct-08 21:22:33 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-08 21:22:33 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-08 21:22:33 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-08 21:22:33 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-08 21:22:33 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-08 21:22:33 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-08 21:22:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-08 21:22:33 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-08 21:22:33 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-08 21:22:33 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-08 21:22:33 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-08 21:22:33 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-08 21:22:33 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-08 21:22:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:22:33 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-08 21:22:33 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Oct-08 21:22:33 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-08 21:22:33 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:22:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:22:37 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-08 21:22:37 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-08 21:22:37 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-08 21:22:37 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-08 21:22:37 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-08 21:22:38 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-08 21:22:38 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-08 21:22:38 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-08 21:22:38 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-08 21:22:38 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 21:22:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:22:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:22:41 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-08 21:22:41 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-08 21:22:41 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-08 21:22:41 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-08 21:22:48 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-08 21:22:53 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-08 21:22:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-08 21:22:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-08 21:22:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-08 21:22:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-08 21:22:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-08 21:22:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-08 21:22:53 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-08 21:22:53 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-08 21:22:53 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-08 21:22:53 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-08 21:22:53 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-08 21:22:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-08 21:22:54 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-08 21:22:54 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-08 21:22:54 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-08 21:22:54 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-08 21:22:54 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-08 21:22:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-08 21:22:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-08 21:22:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-08 21:22:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-08 21:22:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-08 21:22:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-08 21:22:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 21:22:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 21:22:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 21:22:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 21:22:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-08 21:22:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-08 21:22:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-08 21:22:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-08 21:22:56 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-08 21:22:56 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-08 21:22:56 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-08 21:22:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-08 21:22:56 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-08 21:22:56 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-08 21:22:56 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Oct-08 21:22:56 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-08 21:22:56 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-08 21:22:56 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-08 21:22:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-08 21:22:56 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-08 21:22:56 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-08 21:22:56 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-08 21:22:56 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-08 21:22:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:22:56 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-08 21:22:56 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-08 21:22:56 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-08 21:22:56 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-08 21:22:56 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-08 21:22:56 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-08 21:22:56 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-08 21:22:56 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-08 21:22:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 21:22:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-08 21:22:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 21:22:56 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-08 21:22:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 21:22:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 21:22:56 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-08 21:22:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 21:22:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-08 21:22:56 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-08 21:22:56 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-08 21:22:56 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-08 21:22:56 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-08 21:22:56 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-08 21:22:56 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-08 21:22:56 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-08 21:22:56 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-08 21:22:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 21:22:57 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-08 21:22:57 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-08 21:22:57 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-08 21:22:57 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-08 21:22:57 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-08 21:22:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-08 21:22:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:22:57 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-08 21:22:57 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-08 21:22:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:23:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 21:23:12 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-08 21:23:12 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-08 21:23:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-08 21:23:12 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-08 21:23:12 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-08 21:23:12 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-08 21:23:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:23:12 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-08 21:23:12 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-08 21:23:12 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-08 21:23:12 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-08 21:23:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-08 21:23:12 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-08 21:23:12 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-08 21:23:12 START begin_task: Starting task 'selecting calibration port' 2008-Oct-08 21:23:12 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-08 21:23:12 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-08 21:23:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-08 21:23:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:23:12 START begin_task: Starting task 'waiting on calport' 2008-Oct-08 21:23:12 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-08 21:23:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:13 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-08 21:23:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:23:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 21:23:13 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-08 21:23:13 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-08 21:23:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-08 21:23:13 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-08 21:23:13 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-08 21:23:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-08 21:23:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-08 21:23:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 21:23:13 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-08 21:23:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 21:23:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 21:23:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 21:23:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 21:23:13 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 21:23:13 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-08 21:23:13 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-08 21:23:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 21:23:13 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-08 21:23:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 21:23:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 21:23:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 21:23:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 21:23:13 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 21:23:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 21:23:14 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-08 21:23:14 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-08 21:23:14 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-08 21:23:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:23:14 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-08 21:23:14 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-08 21:23:14 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-08 21:23:14 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-08 21:23:14 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-08 21:23:14 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-08 21:23:14 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-08 21:23:14 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-08 21:23:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-08 21:23:14 LOG3 track_source: Calling 'track_source galfasrc 221000.0 +095836 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 21:23:14 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 21:23:14 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-08 21:23:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-08 21:23:14 INFO1 track_source: Starting to track galfasrc 2008-Oct-08 21:23:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-08 21:23:14 LOG3 vw_send: To DATATAKING: set ra 221000.0 2008-Oct-08 21:23:14 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 21:23:14 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 21:23:14 LOG3 vw_send: To DATATAKING: pnt tr 221000.0 +095836 -CJ 2008-Oct-08 21:23:14 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:23:14 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 21:23:14 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-08 21:23:14 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 21:23:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:23:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 21:23:14 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-08 21:23:14 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-08 21:23:14 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-08 21:23:14 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-08 21:23:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:23:14 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-08 21:23:14 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-08 21:23:14 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-08 21:23:14 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-08 21:23:14 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-08 21:23:14 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-08 21:23:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-08 21:23:14 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-08 21:23:14 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-08 21:23:14 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-08 21:23:14 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-08 21:23:14 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-08 21:23:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 21:23:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-08 21:23:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-08 21:23:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-08 21:23:15 LOG4 got_cormsg: From DATATAKING: set ra 221000.0 2008-Oct-08 21:23:15 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 21:23:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20081008.a2010.0016.fits 2008-Oct-08 21:23:15 LOG4 got_cormsg: From DATATAKING: vw% 221000.0 2008-Oct-08 21:23:15 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 21:23:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 21:23:15 LOG4 got_cormsg: From DATATAKING: pnt tr 221000.0 +095836 -CJ 2008-Oct-08 21:23:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:23:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 21:23:15 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081008.a2010.0016.fits} 2008-Oct-08 21:23:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:23:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 21:23:42 ERROR WAPP=4-wapprt: ERROR failed to bind to socket! 2008-Oct-08 21:23:42 ALERT WAPP=4-wapprt: Exiting! 2008-Oct-08 21:25:44 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2008-Oct-08 21:25:45 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2008-Oct-08 21:25:45 LOG5 task_failed: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-08 21:25:45 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2008-Oct-08 21:25:45 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 1 failed 2008-Oct-08 21:25:45 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-08 21:25:45 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-08 21:25:45 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 1 failed 2008-Oct-08 21:25:45 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2008-Oct-08 21:25:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Oct-08 21:25:45 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2008-Oct-08 21:25:45 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 1 failed 2008-Oct-08 21:25:45 ALERT run_command_file: Stopping command file processing at line 7! 2008-Oct-08 21:25:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Oct-08 21:25:45 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Oct-08 21:25:45 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2008-Oct-08 21:25:45 ERROR finish_task: ERROR failed running: command file 'command_galfasrc' 2008-Oct-08 21:25:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Oct-08 21:25:45 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'FAILED' 2008-Oct-08 21:25:45 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2008-Oct-08 21:25:54 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-08 21:25:54 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-08 21:25:54 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-08 21:25:54 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-08 21:25:54 LOG5 begin_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-08 21:25:55 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-08 21:25:55 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-08 21:25:55 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-08 21:25:55 LOG5 end_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-08 21:25:55 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 21:25:55 LOG3 exec_msg: Closing socket 2008-Oct-08 21:25:55 LOG3 exec_msg: Closing socket 2008-Oct-08 21:25:55 LOG3 exec_msg: Closing socket 2008-Oct-08 21:25:55 LOG3 exec_msg: Closing socket 2008-Oct-08 21:25:57 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-08 21:25:57 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-08 21:25:57 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-08 21:25:57 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-08 21:26:06 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-08 21:26:11 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-08 21:26:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-08 21:26:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-08 21:26:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-08 21:26:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-08 21:26:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-08 21:26:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-08 21:26:11 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-08 21:26:11 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-08 21:26:11 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-08 21:26:11 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-08 21:26:11 LOG5 begin_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-08 21:26:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-08 21:26:11 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-08 21:26:11 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-08 21:26:11 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-08 21:26:12 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-08 21:26:12 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-08 21:26:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 21:26:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 21:26:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 21:26:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-08 21:26:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-08 21:26:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-08 21:26:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-08 21:26:14 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-08 21:26:14 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-08 21:26:14 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-08 21:26:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-08 21:26:14 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-08 21:26:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 21:26:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-08 21:26:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 21:26:14 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-08 21:26:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 21:26:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 21:26:14 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-08 21:26:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 21:26:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-08 21:26:14 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-08 21:26:14 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-08 21:26:14 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-08 21:26:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-08 21:26:14 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-08 21:26:14 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-08 21:26:14 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-08 21:26:14 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-08 21:26:14 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-08 21:26:14 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-08 21:26:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-08 21:26:14 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-08 21:26:14 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-08 21:26:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-08 21:26:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:26:14 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-08 21:26:14 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-08 21:26:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 21:26:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 21:26:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:26:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:26:14 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-08 21:26:14 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-08 21:26:14 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-08 21:26:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-08 21:26:14 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-08 21:26:14 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-08 21:26:14 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-08 21:26:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:26:14 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-08 21:26:14 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-08 21:26:14 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-08 21:26:14 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-08 21:26:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-08 21:26:14 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-08 21:26:14 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-08 21:26:14 START begin_task: Starting task 'selecting calibration port' 2008-Oct-08 21:26:14 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-08 21:26:14 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-08 21:26:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-08 21:26:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:26:14 START begin_task: Starting task 'waiting on calport' 2008-Oct-08 21:26:14 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-08 21:26:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:26:14 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-08 21:26:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:26:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:26:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 21:26:15 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-08 21:26:15 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-08 21:26:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-08 21:26:15 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-08 21:26:15 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-08 21:26:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-08 21:26:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-08 21:26:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 21:26:15 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-08 21:26:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:26:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 21:26:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 21:26:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 21:26:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 21:26:15 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-08 21:26:15 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-08 21:26:15 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-08 21:26:15 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-08 21:26:15 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-08 21:26:15 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-08 21:26:15 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-08 21:26:15 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-08 21:26:15 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-08 21:26:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 21:26:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 21:26:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 21:26:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 21:26:15 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-08 21:26:15 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-08 21:26:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 21:26:15 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-08 21:26:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 21:26:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 21:26:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 21:26:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 21:26:15 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-08 21:26:15 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-08 21:26:15 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-08 21:26:15 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-08 21:26:15 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-08 21:26:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:26:15 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-08 21:26:15 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-08 21:26:15 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-08 21:26:15 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-08 21:26:15 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-08 21:26:15 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-08 21:26:15 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-08 21:26:15 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-08 21:26:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-08 21:26:16 LOG3 track_source: Calling 'track_source galfasrc 221000.0 +095836 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 21:26:16 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 21:26:16 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-08 21:26:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-08 21:26:16 INFO1 track_source: Starting to track galfasrc 2008-Oct-08 21:26:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-08 21:26:16 LOG3 vw_send: To DATATAKING: set ra 221000.0 2008-Oct-08 21:26:16 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 21:26:16 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 21:26:16 LOG3 vw_send: To DATATAKING: pnt tr 221000.0 +095836 -CJ 2008-Oct-08 21:26:16 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:26:16 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 21:26:16 LOG5 finish_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-08 21:26:16 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 21:26:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:26:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 21:26:16 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-08 21:26:16 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-08 21:26:16 LOG5 finish_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-08 21:26:16 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-08 21:26:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:26:16 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-08 21:26:16 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-08 21:26:16 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-08 21:26:16 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-08 21:26:16 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-08 21:26:16 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-08 21:26:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-08 21:26:16 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-08 21:26:16 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-08 21:26:16 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-08 21:26:16 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-08 21:26:16 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-08 21:26:16 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 21:26:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-08 21:26:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-08 21:26:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-08 21:26:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 21:26:16 LOG4 got_cormsg: From DATATAKING: set ra 221000.0 2008-Oct-08 21:26:16 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 21:26:16 LOG4 got_cormsg: From DATATAKING: vw% 221000.0 2008-Oct-08 21:26:16 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 21:26:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:26:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 21:26:16 LOG4 got_cormsg: From DATATAKING: pnt tr 221000.0 +095836 -CJ 2008-Oct-08 21:26:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:26:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 21:26:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:26:58 ERROR WAPP=4-wapprt: ERROR failed to bind to socket! 2008-Oct-08 21:26:58 ALERT WAPP=4-wapprt: Exiting! 2008-Oct-08 21:27:02 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Oct-08 21:27:02 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Oct-08 21:27:02 WARNING abort_task: WARNING abort requested! 2008-Oct-08 21:27:02 WARNING abort_task: WARNING Aborting wait for waiting on ALFA rotation 2008-Oct-08 21:27:02 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'ABORT' 2008-Oct-08 21:27:02 LOG5 end_task: Level: (3) ID = <10031> Status = 1 0 0 0 abort 2008-Oct-08 21:27:02 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-08 21:27:02 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-08 21:27:02 LOG5 finish_task: Level: (2) ID = <10030> Status = 1 0 0 0 abort 2008-Oct-08 21:27:02 WARNING finish_task: WARNING aborted configuration: rotating ALFA to +19 degrees 2008-Oct-08 21:27:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Oct-08 21:27:02 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'ABORT' 2008-Oct-08 21:27:02 LOG5 end_task: Level: (2) ID = <10030> Status = 1 0 0 0 abort 2008-Oct-08 21:27:02 ALERT run_command_file: Stopping command file processing at line 7! 2008-Oct-08 21:27:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Oct-08 21:27:02 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Oct-08 21:27:02 LOG5 finish_task: Level: (1) ID = <10019> Status = 1 0 0 0 abort 2008-Oct-08 21:27:02 WARNING finish_task: WARNING aborted running: command file 'command_galfasrc' 2008-Oct-08 21:27:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Oct-08 21:27:02 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'ABORT' 2008-Oct-08 21:27:02 LOG5 end_task: Level: (1) ID = <10019> Status = 1 0 0 0 abort 2008-Oct-08 21:27:47 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-08 21:27:47 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-08 21:27:47 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-08 21:27:47 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-08 21:27:47 LOG5 begin_task: Level: (1) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-08 21:27:47 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-08 21:27:47 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-08 21:27:47 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-08 21:27:47 LOG5 end_task: Level: (1) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-08 21:27:47 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 21:27:47 LOG3 exec_msg: Closing socket 2008-Oct-08 21:27:47 LOG3 exec_msg: Closing socket 2008-Oct-08 21:27:47 LOG3 exec_msg: Closing socket 2008-Oct-08 21:27:47 LOG3 exec_msg: Closing socket 2008-Oct-08 21:27:49 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-08 21:27:49 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-08 21:27:49 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-08 21:27:49 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-08 21:28:03 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-08 21:28:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-08 21:28:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-08 21:28:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-08 21:28:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-08 21:28:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-08 21:28:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-08 21:28:03 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-08 21:28:03 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-08 21:28:03 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-08 21:28:03 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-08 21:28:03 LOG5 begin_task: Level: (1) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-08 21:28:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-08 21:28:03 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-08 21:28:04 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-08 21:28:04 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-08 21:28:04 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-08 21:28:04 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-08 21:28:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-08 21:28:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-08 21:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 21:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 21:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 21:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 21:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-08 21:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-08 21:28:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-08 21:28:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-08 21:28:06 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-08 21:28:06 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-08 21:28:06 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-08 21:28:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-08 21:28:06 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-08 21:28:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 21:28:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-08 21:28:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 21:28:06 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-08 21:28:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 21:28:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 21:28:06 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-08 21:28:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 21:28:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-08 21:28:06 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-08 21:28:06 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-08 21:28:06 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-08 21:28:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-08 21:28:06 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-08 21:28:06 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-08 21:28:06 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-08 21:28:06 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-08 21:28:06 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-08 21:28:06 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-08 21:28:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-08 21:28:06 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-08 21:28:06 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-08 21:28:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-08 21:28:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:28:06 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-08 21:28:06 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-08 21:28:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 21:28:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 21:28:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:28:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:28:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:28:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 21:28:06 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-08 21:28:06 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-08 21:28:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-08 21:28:06 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-08 21:28:06 LOG5 finish_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-08 21:28:06 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-08 21:28:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:28:06 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-08 21:28:06 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-08 21:28:06 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-08 21:28:06 LOG5 begin_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-08 21:28:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-08 21:28:06 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-08 21:28:06 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-08 21:28:06 START begin_task: Starting task 'selecting calibration port' 2008-Oct-08 21:28:06 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-08 21:28:06 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-08 21:28:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-08 21:28:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:28:06 START begin_task: Starting task 'waiting on calport' 2008-Oct-08 21:28:06 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-08 21:28:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:28:06 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-08 21:28:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:28:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:28:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 21:28:07 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-08 21:28:07 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-08 21:28:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-08 21:28:07 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-08 21:28:07 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-08 21:28:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-08 21:28:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-08 21:28:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 21:28:07 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-08 21:28:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 21:28:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:28:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 21:28:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 21:28:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 21:28:07 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-08 21:28:07 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-08 21:28:07 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-08 21:28:07 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-08 21:28:07 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-08 21:28:07 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-08 21:28:07 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-08 21:28:07 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-08 21:28:07 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-08 21:28:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 21:28:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 21:28:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 21:28:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 21:28:07 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-08 21:28:07 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-08 21:28:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 21:28:07 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-08 21:28:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 21:28:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 21:28:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 21:28:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 21:28:07 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-08 21:28:07 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-08 21:28:07 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-08 21:28:07 LOG5 finish_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-08 21:28:07 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-08 21:28:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:28:07 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-08 21:28:07 LOG5 end_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-08 21:28:07 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-08 21:28:07 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-08 21:28:07 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-08 21:28:07 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-08 21:28:07 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-08 21:28:07 LOG5 begin_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-08 21:28:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-08 21:28:08 LOG3 track_source: Calling 'track_source galfasrc 221300.0 +095836 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 21:28:08 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 21:28:08 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-08 21:28:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-08 21:28:08 INFO1 track_source: Starting to track galfasrc 2008-Oct-08 21:28:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-08 21:28:08 LOG3 vw_send: To DATATAKING: set ra 221300.0 2008-Oct-08 21:28:08 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 21:28:08 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 21:28:08 LOG3 vw_send: To DATATAKING: pnt tr 221300.0 +095836 -CJ 2008-Oct-08 21:28:08 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:28:08 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 21:28:08 LOG5 finish_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-08 21:28:08 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 21:28:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:28:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 21:28:08 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-08 21:28:08 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-08 21:28:08 LOG5 finish_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-08 21:28:08 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-08 21:28:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:28:08 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-08 21:28:08 LOG5 end_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-08 21:28:08 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-08 21:28:08 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-08 21:28:08 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-08 21:28:08 LOG5 begin_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-08 21:28:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-08 21:28:08 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-08 21:28:08 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-08 21:28:08 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-08 21:28:08 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-08 21:28:08 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-08 21:28:08 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 21:28:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-08 21:28:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-08 21:28:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-08 21:28:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 21:28:08 LOG4 got_cormsg: From DATATAKING: set ra 221300.0 2008-Oct-08 21:28:08 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 21:28:08 LOG4 got_cormsg: From DATATAKING: vw% 221300.0 2008-Oct-08 21:28:08 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 21:28:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:28:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 21:28:08 LOG4 got_cormsg: From DATATAKING: pnt tr 221300.0 +095836 -CJ 2008-Oct-08 21:28:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:28:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 21:28:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:28:50 ERROR WAPP=4-wapprt: ERROR failed to bind to socket! 2008-Oct-08 21:28:50 ALERT WAPP=4-wapprt: Exiting! 2008-Oct-08 21:28:54 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Oct-08 21:28:55 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Oct-08 21:28:55 WARNING abort_task: WARNING abort requested! 2008-Oct-08 21:28:55 WARNING abort_task: WARNING Aborting wait for waiting on ALFA rotation 2008-Oct-08 21:28:55 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'ABORT' 2008-Oct-08 21:28:55 LOG5 end_task: Level: (3) ID = <10045> Status = 1 0 0 0 abort 2008-Oct-08 21:28:55 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-08 21:28:55 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-08 21:28:55 LOG5 finish_task: Level: (2) ID = <10044> Status = 1 0 0 0 abort 2008-Oct-08 21:28:55 WARNING finish_task: WARNING aborted configuration: rotating ALFA to +19 degrees 2008-Oct-08 21:28:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Oct-08 21:28:55 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'ABORT' 2008-Oct-08 21:28:55 LOG5 end_task: Level: (2) ID = <10044> Status = 1 0 0 0 abort 2008-Oct-08 21:28:55 ALERT run_command_file: Stopping command file processing at line 7! 2008-Oct-08 21:28:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Oct-08 21:28:55 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Oct-08 21:28:55 LOG5 finish_task: Level: (1) ID = <10033> Status = 1 0 0 0 abort 2008-Oct-08 21:28:55 WARNING finish_task: WARNING aborted running: command file 'command_galfasrc' 2008-Oct-08 21:28:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Oct-08 21:28:55 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'ABORT' 2008-Oct-08 21:28:55 LOG5 end_task: Level: (1) ID = <10033> Status = 1 0 0 0 abort 2008-Oct-08 21:29:22 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-08 21:29:22 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-08 21:29:22 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-08 21:29:22 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-08 21:29:22 LOG5 begin_task: Level: (1) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-08 21:29:22 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-08 21:29:22 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-08 21:29:22 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-08 21:29:22 LOG5 end_task: Level: (1) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-08 21:29:22 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 21:29:22 LOG3 exec_msg: Closing socket 2008-Oct-08 21:29:22 LOG3 exec_msg: Closing socket 2008-Oct-08 21:29:22 LOG3 exec_msg: Closing socket 2008-Oct-08 21:29:22 LOG3 exec_msg: Closing socket 2008-Oct-08 21:29:25 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-08 21:29:25 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-08 21:29:25 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-08 21:29:25 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-08 21:29:33 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-08 21:29:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 21:29:35 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-08 21:29:35 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-08 21:29:35 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-08 21:29:35 LOG5 begin_task: Level: (1) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-08 21:29:35 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-08 21:29:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-08 21:29:35 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-08 21:29:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 21:29:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-08 21:29:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 21:29:35 LOG5 begin_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-08 21:29:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 21:29:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 21:29:35 LOG5 end_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-08 21:29:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 21:29:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-08 21:29:35 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-08 21:29:35 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-08 21:29:35 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-08 21:29:35 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-08 21:29:35 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-08 21:29:35 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-08 21:29:35 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-08 21:29:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 21:29:35 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-08 21:29:35 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-08 21:29:35 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-08 21:29:35 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-08 21:29:35 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-08 21:29:35 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-08 21:29:35 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-08 21:29:35 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-08 21:29:35 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-08 21:29:35 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-08 21:29:35 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-08 21:29:35 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Oct-08 21:29:35 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-08 21:29:35 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-08 21:29:35 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-08 21:29:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 21:29:36 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-08 21:29:36 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-08 21:29:36 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-08 21:29:36 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-08 21:29:36 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-08 21:29:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-08 21:29:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:29:36 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-08 21:29:36 LOG5 begin_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-08 21:29:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 21:29:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 21:29:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:29:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:29:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:29:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 21:29:36 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-08 21:29:36 LOG5 end_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-08 21:29:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-08 21:29:36 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-08 21:29:36 LOG5 finish_task: Level: (1) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-08 21:29:36 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-08 21:29:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:29:36 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-08 21:29:36 LOG5 end_task: Level: (1) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-08 21:29:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-08 21:29:36 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-08 21:29:36 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-08 21:29:36 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-08 21:29:36 LOG5 begin_task: Level: (1) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-08 21:29:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-08 21:29:36 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-08 21:29:36 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-08 21:29:36 START begin_task: Starting task 'selecting calibration port' 2008-Oct-08 21:29:36 LOG5 begin_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-08 21:29:36 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-08 21:29:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-08 21:29:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:29:36 START begin_task: Starting task 'waiting on calport' 2008-Oct-08 21:29:36 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-08 21:29:37 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-08 21:29:37 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-08 21:29:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:29:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:29:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 21:29:37 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-08 21:29:37 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-08 21:29:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-08 21:29:37 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-08 21:29:37 LOG5 end_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-08 21:29:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-08 21:29:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-08 21:29:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 21:29:37 LOG5 begin_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-08 21:29:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:29:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 21:29:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 21:29:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 21:29:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 21:29:37 LOG5 end_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-08 21:29:37 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-08 21:29:37 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-08 21:29:37 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-08 21:29:37 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-08 21:29:37 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-08 21:29:37 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-08 21:29:37 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-08 21:29:37 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-08 21:29:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 21:29:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 21:29:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 21:29:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 21:29:37 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-08 21:29:37 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-08 21:29:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 21:29:37 LOG5 begin_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-08 21:29:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 21:29:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 21:29:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 21:29:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 21:29:37 LOG5 end_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-08 21:29:37 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-08 21:29:37 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-08 21:29:37 LOG5 finish_task: Level: (1) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-08 21:29:37 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-08 21:29:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:29:37 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-08 21:29:37 LOG5 end_task: Level: (1) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-08 21:29:37 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 21:29:37 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-08 21:29:37 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-08 21:29:37 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-08 21:29:37 LOG5 begin_task: Level: (1) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-08 21:29:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-08 21:29:38 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-08 21:29:38 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-08 21:29:38 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-08 21:29:38 LOG5 finish_task: Level: (1) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-08 21:29:38 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-08 21:29:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:29:38 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-08 21:29:38 LOG5 end_task: Level: (1) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-08 21:29:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-08 21:29:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-08 21:29:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 21:29:39 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-08 21:29:58 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-08 21:29:58 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 221500.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-08 21:29:58 LOG1 track_new_source: Calling 'track_new_source drift41p2 221500.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-08 21:29:58 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-08 21:29:58 LOG5 begin_task: Level: (1) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-08 21:29:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2008-Oct-08 21:29:58 LOG3 track_source: Calling 'track_source drift41p2 221500.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 21:29:58 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 21:29:58 LOG5 begin_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-08 21:29:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 21:29:58 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 21:29:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 21:29:58 LOG3 vw_send: To DATATAKING: set ra 221500.0 2008-Oct-08 21:29:58 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 21:29:58 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 21:29:58 LOG3 vw_send: To DATATAKING: pnt tr 221500.0 +095836 -CJ 2008-Oct-08 21:29:58 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:29:58 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 21:29:58 LOG5 finish_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-08 21:29:58 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 21:29:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:29:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 21:29:58 LOG5 end_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-08 21:29:58 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-08 21:29:58 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-08 21:29:58 LOG5 begin_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-08 21:29:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-08 21:29:58 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 21:29:58 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-08 21:29:58 LOG5 finish_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-08 21:29:58 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-08 21:29:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:29:58 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-08 21:29:58 LOG5 end_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-08 21:29:58 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-08 21:29:58 LOG5 finish_task: Level: (1) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-08 21:29:58 DONE finish_task: DONE finished selecting: new source 2008-Oct-08 21:29:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:29:58 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-08 21:29:58 LOG5 end_task: Level: (1) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-08 21:29:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 21:29:58 LOG4 got_cormsg: From DATATAKING: set ra 221500.0 2008-Oct-08 21:29:58 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 21:29:58 LOG4 got_cormsg: From DATATAKING: vw% 221500.0 2008-Oct-08 21:29:58 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 21:29:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:29:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 21:29:58 LOG4 got_cormsg: From DATATAKING: pnt tr 221500.0 +095836 -CJ 2008-Oct-08 21:29:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:29:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 21:29:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:29:58 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 21:29:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:30:24 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-08 21:30:24 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-08 21:30:24 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-08 21:30:24 LOG5 begin_task: Level: (1) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-08 21:30:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-08 21:30:25 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-08 21:30:25 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-08 21:30:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-08 21:30:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:30:25 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-08 21:30:25 LOG5 begin_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-08 21:30:25 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-08 21:30:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:30:25 ERROR WAPP=4-wapprt: ERROR failed to bind to socket! 2008-Oct-08 21:30:25 ALERT WAPP=4-wapprt: Exiting! 2008-Oct-08 21:30:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:30:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 21:30:28 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-08 21:30:28 LOG5 end_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-08 21:30:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-08 21:30:28 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-08 21:30:28 LOG5 begin_task: Level: (2) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-08 21:30:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-08 21:30:28 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 21:30:28 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 21:30:28 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 21:30:28 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 21:30:28 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-08 21:30:28 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-08 21:30:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-08 21:30:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:30:28 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 4 dB --- beam 1: 5 5 dB 2008-Oct-08 21:30:28 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 4 4 dB 2008-Oct-08 21:30:28 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2008-Oct-08 21:30:28 ERROR WAPP=4-check_pid: ERROR WAPP process with process-ID 0 is no longer running! 2008-Oct-08 21:30:28 INFO1 WAPP=1+2+3-adjust_power: DONE adjusting power 2008-Oct-08 21:30:38 ERROR end_wait_seconds: ERROR timed out while waiting for adjust WAPP power! 2008-Oct-08 21:30:38 LOG1 task_failed: Task 'waiting on adjust WAPP power' failed! 2008-Oct-08 21:30:38 LOG5 task_failed: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-08 21:30:38 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'FAILED' 2008-Oct-08 21:30:38 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 1 failed 2008-Oct-08 21:30:38 START begin_task: Starting task 'stopping the WAPPs' 2008-Oct-08 21:30:38 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 1 failed 2008-Oct-08 21:30:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Oct-08 21:30:38 INFO1 stop_wapp: Stopping the WAPPs 2008-Oct-08 21:30:38 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Oct-08 21:30:38 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Oct-08 21:30:38 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Oct-08 21:30:38 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Oct-08 21:30:38 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Oct-08 21:30:38 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 1 failed 2008-Oct-08 21:30:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Oct-08 21:30:38 INFO1 WAPP=1+2+3-wappcon: Can't abort --- the WAPP isn't running 2008-Oct-08 21:30:38 ERROR WAPP=4-check_pid: ERROR WAPP process with process-ID 0 is no longer running! 2008-Oct-08 21:30:41 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Oct-08 21:30:41 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Oct-08 21:30:41 WARNING abort_task: WARNING abort requested! 2008-Oct-08 21:30:41 WARNING abort_task: WARNING Aborting wait for waiting on stopping WAPPs 2008-Oct-08 21:30:41 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2008-Oct-08 21:30:41 LOG5 end_task: Level: (4) ID = <10064> Status = 1 0 0 1 failed 2008-Oct-08 21:30:41 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2008-Oct-08 21:30:41 LOG5 end_task: Level: (3) ID = <10063> Status = 1 0 0 1 failed 2008-Oct-08 21:30:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-08 21:30:41 LOG5 finish_task: Level: (2) ID = <10061> Status = 1 0 0 1 failed 2008-Oct-08 21:30:41 ERROR finish_task: ERROR failed adjusting: WAPP power 2008-Oct-08 21:30:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Oct-08 21:30:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2008-Oct-08 21:30:41 LOG5 end_task: Level: (2) ID = <10061> Status = 1 0 0 1 failed 2008-Oct-08 21:30:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-08 21:30:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-08 21:30:41 LOG5 finish_task: Level: (1) ID = <10059> Status = 1 0 0 1 failed 2008-Oct-08 21:30:41 ERROR finish_task: ERROR failed adjusting: WAPP power levels 2008-Oct-08 21:30:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Oct-08 21:30:41 END end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2008-Oct-08 21:30:41 LOG5 end_task: Level: (1) ID = <10059> Status = 1 0 0 1 failed 2008-Oct-08 21:30:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.000 < 0.75)! 2008-Oct-08 21:30:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.096 1.107 1.092 2008-Oct-08 21:30:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 0.939 1.070 1.003 2008-Oct-08 21:30:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 1.053 1.105 1.076 2008-Oct-08 21:30:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 0.000 0.000 0.000 2008-Oct-08 21:40:44 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-08 21:40:44 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 222500.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-08 21:40:44 LOG1 track_new_source: Calling 'track_new_source drift41p2 222500.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-08 21:40:44 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-08 21:40:44 LOG5 begin_task: Level: (1) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-08 21:40:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2008-Oct-08 21:40:44 LOG3 track_source: Calling 'track_source drift41p2 222500.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 21:40:44 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 21:40:44 LOG5 begin_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-08 21:40:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 21:40:44 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 21:40:44 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 21:40:44 LOG3 vw_send: To DATATAKING: set ra 222500.0 2008-Oct-08 21:40:44 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 21:40:44 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 21:40:44 LOG3 vw_send: To DATATAKING: pnt tr 222500.0 +095836 -CJ 2008-Oct-08 21:40:44 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:40:44 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 21:40:44 LOG5 finish_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-08 21:40:44 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 21:40:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:40:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 21:40:44 LOG5 end_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-08 21:40:44 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-08 21:40:44 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-08 21:40:44 LOG5 begin_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-08 21:40:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-08 21:40:44 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 21:40:44 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-08 21:40:44 LOG5 finish_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-08 21:40:44 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-08 21:40:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:40:44 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-08 21:40:44 LOG5 end_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-08 21:40:44 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-08 21:40:44 LOG5 finish_task: Level: (1) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-08 21:40:44 DONE finish_task: DONE finished selecting: new source 2008-Oct-08 21:40:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:40:45 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-08 21:40:45 LOG5 end_task: Level: (1) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-08 21:40:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 21:40:45 LOG4 got_cormsg: From DATATAKING: set ra 222500.0 2008-Oct-08 21:40:45 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 21:40:45 LOG4 got_cormsg: From DATATAKING: vw% 222500.0 2008-Oct-08 21:40:45 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 21:40:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:40:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 21:40:45 LOG4 got_cormsg: From DATATAKING: pnt tr 222500.0 +095836 -CJ 2008-Oct-08 21:40:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:40:45 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 21:40:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:40:45 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 21:40:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:40:55 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-08 21:40:55 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 222500.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-08 21:40:55 LOG1 track_new_source: Calling 'track_new_source drift41p2 222500.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-08 21:40:55 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-08 21:40:55 LOG5 begin_task: Level: (1) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-08 21:40:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2008-Oct-08 21:40:55 LOG3 track_source: Calling 'track_source drift41p2 222500.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 21:40:55 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 21:40:55 LOG5 begin_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-08 21:40:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 21:40:55 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 21:40:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 21:40:55 LOG3 vw_send: To DATATAKING: set ra 222500.0 2008-Oct-08 21:40:55 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 21:40:55 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 21:40:55 LOG3 vw_send: To DATATAKING: pnt tr 222500.0 +095836 -CJ 2008-Oct-08 21:40:55 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:40:55 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 21:40:55 LOG5 finish_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-08 21:40:55 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 21:40:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:40:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 21:40:55 LOG5 end_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-08 21:40:55 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-08 21:40:55 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-08 21:40:55 LOG5 begin_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-08 21:40:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-08 21:40:55 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 21:40:55 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-08 21:40:55 LOG5 finish_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-08 21:40:55 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-08 21:40:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:40:55 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-08 21:40:55 LOG5 end_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-08 21:40:55 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-08 21:40:55 LOG5 finish_task: Level: (1) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-08 21:40:55 DONE finish_task: DONE finished selecting: new source 2008-Oct-08 21:40:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:40:55 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-08 21:40:56 LOG5 end_task: Level: (1) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-08 21:40:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 21:40:56 LOG4 got_cormsg: From DATATAKING: set ra 222500.0 2008-Oct-08 21:40:56 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 21:40:56 LOG4 got_cormsg: From DATATAKING: vw% 222500.0 2008-Oct-08 21:40:56 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 21:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:40:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 21:40:56 LOG4 got_cormsg: From DATATAKING: pnt tr 222500.0 +095836 -CJ 2008-Oct-08 21:40:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:40:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 21:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:40:56 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 21:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:44:27 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-08 21:44:27 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-08 21:44:27 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-08 21:44:27 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-08 21:44:27 LOG5 begin_task: Level: (1) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-08 21:44:27 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-08 21:44:27 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-08 21:44:27 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-08 21:44:27 LOG5 end_task: Level: (1) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-08 21:44:27 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 21:44:27 LOG3 exec_msg: Closing socket 2008-Oct-08 21:44:27 LOG3 exec_msg: Closing socket 2008-Oct-08 21:44:27 LOG3 exec_msg: Closing socket 2008-Oct-08 21:44:27 LOG3 exec_msg: Closing socket 2008-Oct-08 21:44:29 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-08 21:44:29 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-08 21:44:30 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-08 21:44:30 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-08 21:44:41 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-08 21:44:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 21:44:43 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-08 21:44:43 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-08 21:44:43 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-08 21:44:43 LOG5 begin_task: Level: (1) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-08 21:44:43 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-08 21:44:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-08 21:44:43 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-08 21:44:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 21:44:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-08 21:44:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 21:44:43 LOG5 begin_task: Level: (2) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-08 21:44:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 21:44:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 21:44:44 LOG5 end_task: Level: (2) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-08 21:44:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 21:44:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-08 21:44:44 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-08 21:44:44 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-08 21:44:44 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-08 21:44:44 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-08 21:44:44 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-08 21:44:44 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-08 21:44:44 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-08 21:44:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 21:44:45 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-08 21:44:45 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-08 21:44:45 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-08 21:44:45 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-08 21:44:45 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-08 21:44:45 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-08 21:44:45 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-08 21:44:45 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-08 21:44:45 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-08 21:44:45 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-08 21:44:45 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-08 21:44:45 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-08 21:44:45 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-08 21:44:45 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-08 21:44:45 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-08 21:44:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 21:44:45 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-08 21:44:45 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-08 21:44:45 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-08 21:44:45 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-08 21:44:45 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-08 21:44:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-08 21:44:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:44:45 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-08 21:44:45 LOG5 begin_task: Level: (2) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-08 21:44:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 21:44:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-08 21:44:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 21:44:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:44:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:44:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:44:45 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-08 21:44:45 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-08 21:44:45 LOG5 end_task: Level: (2) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-08 21:44:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-08 21:44:45 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-08 21:44:45 LOG5 finish_task: Level: (1) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-08 21:44:45 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-08 21:44:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:44:45 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-08 21:44:45 LOG5 end_task: Level: (1) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-08 21:44:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:44:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-08 21:44:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-08 21:44:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-08 21:44:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-08 21:44:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-08 21:44:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-08 21:44:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-08 21:44:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-08 21:44:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 21:44:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 21:44:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 21:44:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 21:44:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-08 21:44:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-08 21:44:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-08 21:44:46 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-08 21:44:46 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-08 21:44:46 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-08 21:44:46 LOG5 begin_task: Level: (1) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-08 21:44:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-08 21:44:46 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-08 21:44:46 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-08 21:44:46 START begin_task: Starting task 'selecting calibration port' 2008-Oct-08 21:44:46 LOG5 begin_task: Level: (2) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-08 21:44:46 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-08 21:44:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-08 21:44:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:44:46 START begin_task: Starting task 'waiting on calport' 2008-Oct-08 21:44:46 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-08 21:44:46 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-08 21:44:46 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-08 21:44:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:44:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:44:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 21:44:46 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-08 21:44:46 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-08 21:44:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-08 21:44:46 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-08 21:44:46 LOG5 end_task: Level: (2) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-08 21:44:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-08 21:44:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-08 21:44:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 21:44:46 LOG5 begin_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-08 21:44:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:44:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 21:44:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 21:44:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 21:44:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 21:44:46 LOG5 end_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-08 21:44:46 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-08 21:44:46 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-08 21:44:46 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-08 21:44:46 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-08 21:44:46 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-08 21:44:46 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-08 21:44:46 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-08 21:44:46 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-08 21:44:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 21:44:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 21:44:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 21:44:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 21:44:47 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-08 21:44:47 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-08 21:44:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 21:44:47 LOG5 begin_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-08 21:44:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-08 21:44:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-08 21:44:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 21:44:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 21:44:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 21:44:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 21:44:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 21:44:47 LOG5 end_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-08 21:44:47 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-08 21:44:47 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-08 21:44:47 LOG5 finish_task: Level: (1) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-08 21:44:47 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-08 21:44:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:44:47 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-08 21:44:47 LOG5 end_task: Level: (1) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-08 21:44:47 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 21:44:47 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-08 21:44:47 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-08 21:44:47 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-08 21:44:47 LOG5 begin_task: Level: (1) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-08 21:44:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-08 21:44:47 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-08 21:44:47 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-08 21:44:47 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-08 21:44:47 LOG5 finish_task: Level: (1) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-08 21:44:47 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-08 21:44:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:44:47 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-08 21:44:47 LOG5 end_task: Level: (1) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-08 21:44:48 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-08 21:45:00 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-08 21:45:00 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 223000.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-08 21:45:00 LOG1 track_new_source: Calling 'track_new_source drift41p2 223000.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-08 21:45:00 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-08 21:45:00 LOG5 begin_task: Level: (1) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-08 21:45:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2008-Oct-08 21:45:00 LOG3 track_source: Calling 'track_source drift41p2 223000.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 21:45:00 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 21:45:00 LOG5 begin_task: Level: (2) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-08 21:45:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 21:45:00 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 21:45:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 21:45:00 LOG3 vw_send: To DATATAKING: set ra 223000.0 2008-Oct-08 21:45:00 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 21:45:00 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 21:45:00 LOG3 vw_send: To DATATAKING: pnt tr 223000.0 +095836 -CJ 2008-Oct-08 21:45:00 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:45:00 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 21:45:00 LOG5 finish_task: Level: (2) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-08 21:45:00 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 21:45:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:45:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 21:45:00 LOG5 end_task: Level: (2) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-08 21:45:00 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-08 21:45:00 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-08 21:45:00 LOG5 begin_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-08 21:45:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-08 21:45:00 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 21:45:00 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-08 21:45:00 LOG5 finish_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-08 21:45:00 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-08 21:45:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:45:00 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-08 21:45:00 LOG5 end_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-08 21:45:00 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-08 21:45:00 LOG5 finish_task: Level: (1) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-08 21:45:00 DONE finish_task: DONE finished selecting: new source 2008-Oct-08 21:45:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:45:00 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-08 21:45:00 LOG5 end_task: Level: (1) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-08 21:45:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 21:45:00 LOG4 got_cormsg: From DATATAKING: set ra 223000.0 2008-Oct-08 21:45:00 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 21:45:00 LOG4 got_cormsg: From DATATAKING: vw% 223000.0 2008-Oct-08 21:45:00 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 21:45:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:45:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 21:45:00 LOG4 got_cormsg: From DATATAKING: pnt tr 223000.0 +095836 -CJ 2008-Oct-08 21:45:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:45:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 21:45:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:45:01 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 21:45:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:45:30 ERROR WAPP=4-wapprt: ERROR failed to bind to socket! 2008-Oct-08 21:45:30 ALERT WAPP=4-wapprt: Exiting! 2008-Oct-08 21:45:37 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-08 21:45:37 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-08 21:45:37 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-08 21:45:37 LOG5 begin_task: Level: (1) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-08 21:45:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-08 21:45:37 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-08 21:45:37 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-08 21:45:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-08 21:45:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:45:37 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-08 21:45:37 LOG5 begin_task: Level: (2) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-08 21:45:37 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-08 21:45:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 21:45:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:45:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 21:45:41 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-08 21:45:41 LOG5 end_task: Level: (2) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-08 21:45:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-08 21:45:41 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-08 21:45:41 LOG5 begin_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-08 21:45:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-08 21:45:41 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 21:45:41 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 21:45:41 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 21:45:41 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 21:45:41 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-08 21:45:41 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-08 21:45:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:45:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-08 21:45:41 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 4 dB --- beam 1: 5 5 dB 2008-Oct-08 21:45:41 ERROR WAPP=4-check_pid: ERROR WAPP process with process-ID 0 is no longer running! 2008-Oct-08 21:45:41 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 4 4 dB 2008-Oct-08 21:45:41 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2008-Oct-08 21:45:41 INFO1 WAPP=1+2+3-adjust_power: DONE adjusting power 2008-Oct-08 21:45:51 ERROR end_wait_seconds: ERROR timed out while waiting for adjust WAPP power! 2008-Oct-08 21:45:51 LOG1 task_failed: Task 'waiting on adjust WAPP power' failed! 2008-Oct-08 21:45:51 LOG5 task_failed: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-08 21:45:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'FAILED' 2008-Oct-08 21:45:51 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 1 failed 2008-Oct-08 21:45:51 START begin_task: Starting task 'stopping the WAPPs' 2008-Oct-08 21:45:51 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 1 failed 2008-Oct-08 21:45:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Oct-08 21:45:51 INFO1 stop_wapp: Stopping the WAPPs 2008-Oct-08 21:45:51 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Oct-08 21:45:51 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Oct-08 21:45:51 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Oct-08 21:45:51 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Oct-08 21:45:51 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Oct-08 21:45:51 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 1 failed 2008-Oct-08 21:45:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Oct-08 21:45:51 ERROR WAPP=4-check_pid: ERROR WAPP process with process-ID 0 is no longer running! 2008-Oct-08 21:45:51 INFO1 WAPP=1+2+3-wappcon: Can't abort --- the WAPP isn't running 2008-Oct-08 21:45:56 ERROR end_wait_seconds: ERROR timed out while waiting for stopping WAPPs! 2008-Oct-08 21:45:56 LOG1 task_failed: Task 'waiting on stopping WAPPs' failed! 2008-Oct-08 21:45:56 LOG5 task_failed: Level: (4) ID = <10089> Status = 0 0 0 1 failed 2008-Oct-08 21:45:56 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2008-Oct-08 21:45:56 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 1 failed 2008-Oct-08 21:45:56 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2008-Oct-08 21:45:56 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 1 failed 2008-Oct-08 21:45:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-08 21:45:56 LOG5 finish_task: Level: (2) ID = <10086> Status = 0 0 0 1 failed 2008-Oct-08 21:45:56 ERROR finish_task: ERROR failed adjusting: WAPP power 2008-Oct-08 21:45:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Oct-08 21:45:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2008-Oct-08 21:45:56 LOG5 end_task: Level: (2) ID = <10086> Status = 0 0 0 1 failed 2008-Oct-08 21:45:56 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-08 21:45:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-08 21:45:56 LOG5 finish_task: Level: (1) ID = <10084> Status = 0 0 0 1 failed 2008-Oct-08 21:45:56 ERROR finish_task: ERROR failed adjusting: WAPP power levels 2008-Oct-08 21:45:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Oct-08 21:45:56 END end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2008-Oct-08 21:45:56 LOG5 end_task: Level: (1) ID = <10084> Status = 0 0 0 1 failed 2008-Oct-08 21:45:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.000 < 0.75)! 2008-Oct-08 21:45:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.036 1.103 1.107 1.096 2008-Oct-08 21:45:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 0.939 1.070 1.010 2008-Oct-08 21:45:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.022 1.051 1.101 1.082 2008-Oct-08 21:45:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 0.000 0.000 0.000 2008-Oct-08 21:52:55 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-08 21:52:55 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 223800.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-08 21:52:55 LOG1 track_new_source: Calling 'track_new_source drift41p2 223800.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-08 21:52:55 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-08 21:52:55 LOG5 begin_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-08 21:52:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2008-Oct-08 21:52:55 LOG3 track_source: Calling 'track_source drift41p2 223800.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 21:52:55 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 21:52:55 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-08 21:52:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 21:52:55 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 21:52:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 21:52:55 LOG3 vw_send: To DATATAKING: set ra 223800.0 2008-Oct-08 21:52:55 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 21:52:55 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 21:52:55 LOG3 vw_send: To DATATAKING: pnt tr 223800.0 +095836 -CJ 2008-Oct-08 21:52:55 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:52:55 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 21:52:55 LOG5 finish_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-08 21:52:55 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 21:52:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:52:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 21:52:55 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-08 21:52:55 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-08 21:52:55 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-08 21:52:55 LOG5 begin_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-08 21:52:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-08 21:52:55 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 21:52:55 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-08 21:52:55 LOG5 finish_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-08 21:52:55 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-08 21:52:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 21:52:56 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-08 21:52:56 LOG5 end_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-08 21:52:56 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-08 21:52:56 LOG5 finish_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-08 21:52:56 DONE finish_task: DONE finished selecting: new source 2008-Oct-08 21:52:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 21:52:56 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-08 21:52:56 LOG5 end_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-08 21:52:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 21:52:56 LOG4 got_cormsg: From DATATAKING: set ra 223800.0 2008-Oct-08 21:52:56 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 21:52:56 LOG4 got_cormsg: From DATATAKING: vw% 223800.0 2008-Oct-08 21:52:56 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 21:52:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:52:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 21:52:56 LOG4 got_cormsg: From DATATAKING: pnt tr 223800.0 +095836 -CJ 2008-Oct-08 21:52:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 21:52:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 21:52:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:52:56 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 21:52:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 21:57:59 LOG3 exec_msg: Closing socket 2008-Oct-08 21:58:02 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-08 22:00:03 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-08 22:00:03 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-08 22:00:03 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-08 22:00:03 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-08 22:00:03 LOG5 begin_task: Level: (1) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-08 22:00:03 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-08 22:00:03 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-08 22:00:03 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-08 22:00:03 LOG5 end_task: Level: (1) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-08 22:00:03 LOG3 exec_msg: Closing socket 2008-Oct-08 22:00:03 LOG3 exec_msg: Closing socket 2008-Oct-08 22:00:03 LOG3 exec_msg: Closing socket 2008-Oct-08 22:00:03 LOG3 exec_msg: Closing socket 2008-Oct-08 22:00:03 LOG3 exec_msg: Closing socket 2008-Oct-08 22:00:06 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-08 22:00:06 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-08 22:00:06 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-08 22:00:06 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-08 22:00:21 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-08 22:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 22:00:24 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-08 22:00:24 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-08 22:00:24 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-08 22:00:24 LOG5 begin_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-08 22:00:24 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-08 22:00:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-08 22:00:24 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-08 22:00:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 22:00:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:00:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 22:00:24 LOG5 begin_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-08 22:00:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 22:00:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 22:00:24 LOG5 end_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-08 22:00:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 22:00:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:00:24 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-08 22:00:24 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-08 22:00:24 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-08 22:00:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-08 22:00:24 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-08 22:00:24 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-08 22:00:24 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-08 22:00:24 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-08 22:00:24 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-08 22:00:24 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-08 22:00:24 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-08 22:00:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-08 22:00:24 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-08 22:00:24 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-08 22:00:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-08 22:00:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:00:24 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-08 22:00:24 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-08 22:00:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 22:00:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-08 22:00:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 22:00:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:00:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:00:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:00:25 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-08 22:00:25 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-08 22:00:25 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-08 22:00:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-08 22:00:25 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-08 22:00:25 LOG5 finish_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-08 22:00:25 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-08 22:00:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:00:25 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-08 22:00:25 LOG5 end_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-08 22:00:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-08 22:00:25 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-08 22:00:25 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-08 22:00:25 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-08 22:00:25 LOG5 begin_task: Level: (1) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-08 22:00:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-08 22:00:25 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-08 22:00:25 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-08 22:00:25 START begin_task: Starting task 'selecting calibration port' 2008-Oct-08 22:00:25 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-08 22:00:25 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-08 22:00:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-08 22:00:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:00:25 START begin_task: Starting task 'waiting on calport' 2008-Oct-08 22:00:25 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-08 22:00:25 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-08 22:00:25 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-08 22:00:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:00:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:00:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 22:00:26 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-08 22:00:26 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-08 22:00:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-08 22:00:26 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-08 22:00:26 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-08 22:00:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-08 22:00:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-08 22:00:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:00:26 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-08 22:00:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:00:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:00:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 22:00:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:00:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:00:26 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-08 22:00:26 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-08 22:00:26 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-08 22:00:26 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-08 22:00:26 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-08 22:00:26 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-08 22:00:26 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-08 22:00:26 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-08 22:00:26 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-08 22:00:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 22:00:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 22:00:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 22:00:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 22:00:26 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-08 22:00:26 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-08 22:00:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:00:26 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-08 22:00:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-08 22:00:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-08 22:00:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:00:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 22:00:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 22:00:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:00:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:00:26 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-08 22:00:26 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-08 22:00:26 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-08 22:00:26 LOG5 finish_task: Level: (1) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-08 22:00:26 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-08 22:00:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:00:26 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-08 22:00:26 LOG5 end_task: Level: (1) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-08 22:00:26 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 22:00:26 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-08 22:00:27 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-08 22:00:27 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:00:27 LOG5 begin_task: Level: (1) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-08 22:00:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-08 22:00:27 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-08 22:00:27 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-08 22:00:27 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:00:27 LOG5 finish_task: Level: (1) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-08 22:00:27 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-08 22:00:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:00:27 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-08 22:00:27 LOG5 end_task: Level: (1) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-08 22:00:28 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-08 22:00:41 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-08 22:00:41 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 224700.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-08 22:00:41 LOG1 track_new_source: Calling 'track_new_source drift41p2 224700.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-08 22:00:41 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-08 22:00:41 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-08 22:00:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2008-Oct-08 22:00:42 LOG3 track_source: Calling 'track_source drift41p2 224700.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 22:00:42 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 22:00:42 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-08 22:00:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 22:00:42 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 22:00:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:00:42 LOG3 vw_send: To DATATAKING: set ra 224700.0 2008-Oct-08 22:00:42 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 22:00:42 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 22:00:42 LOG3 vw_send: To DATATAKING: pnt tr 224700.0 +095836 -CJ 2008-Oct-08 22:00:42 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:00:42 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 22:00:42 LOG5 finish_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-08 22:00:42 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 22:00:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:00:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 22:00:42 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-08 22:00:42 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-08 22:00:42 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-08 22:00:42 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-08 22:00:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-08 22:00:42 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 22:00:42 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-08 22:00:42 LOG5 finish_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-08 22:00:42 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-08 22:00:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:00:42 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-08 22:00:42 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-08 22:00:42 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-08 22:00:42 LOG5 finish_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-08 22:00:42 DONE finish_task: DONE finished selecting: new source 2008-Oct-08 22:00:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:00:42 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-08 22:00:42 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-08 22:00:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:00:42 LOG4 got_cormsg: From DATATAKING: set ra 224700.0 2008-Oct-08 22:00:42 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 22:00:42 LOG4 got_cormsg: From DATATAKING: vw% 224700.0 2008-Oct-08 22:00:42 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 22:00:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:00:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 22:00:42 LOG4 got_cormsg: From DATATAKING: pnt tr 224700.0 +095836 -CJ 2008-Oct-08 22:00:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:00:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 22:00:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:00:42 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 22:00:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:01:33 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-08 22:01:33 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-08 22:01:33 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-08 22:01:33 LOG5 begin_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-08 22:01:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-08 22:01:33 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-08 22:01:33 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-08 22:01:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-08 22:01:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:01:33 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-08 22:01:33 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-08 22:01:33 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-08 22:01:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:01:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:01:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 22:01:36 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-08 22:01:36 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-08 22:01:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-08 22:01:36 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-08 22:01:36 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-08 22:01:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-08 22:01:36 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:01:36 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:01:36 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:01:36 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:01:36 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-08 22:01:36 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-08 22:01:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-08 22:01:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:01:36 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 4 dB --- beam 1: 5 5 dB 2008-Oct-08 22:01:36 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 4 4 dB 2008-Oct-08 22:01:36 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2008-Oct-08 22:01:36 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 1 2 dB 2008-Oct-08 22:01:36 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-08 22:01:36 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-08 22:01:36 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-08 22:01:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.028 1.104 ALFA beam 1: 1.106 1.097 2008-Oct-08 22:01:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.968 0.941 ALFA beam 3: 1.069 1.009 2008-Oct-08 22:01:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.034 1.066 ALFA beam 5: 1.111 1.084 2008-Oct-08 22:01:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.898 0.870 ALFA beam 7: 1.005 0.962 2008-Oct-08 22:01:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-08 22:01:36 LOG5 finish_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-08 22:01:36 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Oct-08 22:01:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:01:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-08 22:01:36 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-08 22:01:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-08 22:01:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-08 22:01:36 LOG5 finish_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-08 22:01:36 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-08 22:01:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:01:36 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-08 22:01:36 LOG5 end_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-08 22:01:47 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2008-Oct-08 22:01:47 LOG4 exec_msg: From OBSERVER: new_file manual 2008-Oct-08 22:01:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 22:01:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 22:01:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 22:01:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 22:01:47 NOTE new_file: There is no need to start a new FITS-file since the current one 'wapp.20081008.a2010.0016.fits' is empty! 2008-Oct-08 22:01:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 22:02:07 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Oct-08 22:02:07 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift41p2 224700.0 +095836 J 0 Topocentric velocity(optical) 2008-Oct-08 22:02:07 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift41p2 224700.0 +095836 J 0 Topocentric velocity(optical)' 2008-Oct-08 22:02:07 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Oct-08 22:02:07 LOG5 begin_task: Level: (1) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-08 22:02:07 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift41p2' 2008-Oct-08 22:02:07 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Oct-08 22:02:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift41p2} 2008-Oct-08 22:02:07 INFO5 fixed_driftmap: Start: year = 2008.7745876112251 RA = 22:47:27.9 Dec = +10:01:34.8 2008-Oct-08 22:02:07 NOTE fixed_driftmap: Setting ZA to 8:19:38.9 ... 2008-Oct-08 22:02:07 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 8.33 2008-Oct-08 22:02:07 LOG3 track_source: Calling 'track_source drift41p2 360.0 8.3274858214 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Oct-08 22:02:07 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 22:02:07 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-08 22:02:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 22:02:07 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 22:02:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:02:07 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Oct-08 22:02:07 LOG3 vw_send: To DATATAKING: set dec 8.3274858214 2008-Oct-08 22:02:07 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 22:02:07 LOG3 vw_send: To DATATAKING: pnt tr 360.0 8.3274858214 -CF 2008-Oct-08 22:02:07 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:02:07 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 22:02:07 LOG5 finish_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-08 22:02:07 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 22:02:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:02:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 22:02:07 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-08 22:02:07 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:02:07 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-08 22:02:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-08 22:02:07 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-08 22:02:07 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Oct-08 22:02:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-08 22:02:07 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-08 22:02:07 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-08 22:02:07 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:02:07 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Oct-08 22:02:07 LOG4 got_cormsg: From DATATAKING: set dec 8.3274858214 2008-Oct-08 22:02:07 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Oct-08 22:02:07 LOG4 got_cormsg: From DATATAKING: vw% 8.3274858214 2008-Oct-08 22:02:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:02:07 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 22:02:07 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 8.3274858214 -CF 2008-Oct-08 22:02:07 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:02:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 22:02:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:04:37 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2008-Oct-08 22:04:37 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2008-Oct-08 22:04:37 LOG5 task_failed: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-08 22:04:37 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2008-Oct-08 22:04:37 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 1 failed 2008-Oct-08 22:04:38 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-08 22:04:38 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:04:38 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 1 failed 2008-Oct-08 22:04:38 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2008-Oct-08 22:04:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2008-Oct-08 22:04:38 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2008-Oct-08 22:04:38 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 1 failed 2008-Oct-08 22:04:38 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Oct-08 22:04:38 LOG5 finish_task: Level: (1) ID = <10110> Status = 0 0 0 1 failed 2008-Oct-08 22:04:38 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Oct-08 22:04:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Oct-08 22:04:38 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Oct-08 22:04:38 LOG5 end_task: Level: (1) ID = <10110> Status = 0 0 0 1 failed 2008-Oct-08 22:04:38 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Oct-08 22:04:38 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Oct-08 22:04:38 WARNING abort_task: WARNING abort requested! 2008-Oct-08 22:04:45 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-08 22:04:45 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-08 22:04:45 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-08 22:04:45 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-08 22:04:45 LOG5 begin_task: Level: (1) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-08 22:04:45 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-08 22:04:45 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-08 22:04:45 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-08 22:04:45 LOG5 end_task: Level: (1) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-08 22:04:45 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 22:04:45 LOG3 exec_msg: Closing socket 2008-Oct-08 22:04:45 LOG3 exec_msg: Closing socket 2008-Oct-08 22:04:45 LOG3 exec_msg: Closing socket 2008-Oct-08 22:04:46 LOG3 exec_msg: Closing socket 2008-Oct-08 22:04:48 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-08 22:04:48 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-08 22:04:48 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-08 22:04:48 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-08 22:05:06 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-08 22:05:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-08 22:05:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-08 22:05:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-08 22:05:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-08 22:05:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-08 22:05:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-08 22:05:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-08 22:05:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-08 22:05:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-08 22:05:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-08 22:05:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-08 22:05:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-08 22:05:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 22:05:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 22:05:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 22:05:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 22:05:09 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-08 22:05:09 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-08 22:05:09 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-08 22:05:09 LOG5 begin_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-08 22:05:09 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-08 22:05:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-08 22:05:09 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-08 22:05:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 22:05:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:05:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 22:05:09 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-08 22:05:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 22:05:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 22:05:09 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-08 22:05:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 22:05:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:05:09 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-08 22:05:09 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-08 22:05:09 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-08 22:05:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-08 22:05:09 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-08 22:05:09 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-08 22:05:09 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-08 22:05:09 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-08 22:05:09 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-08 22:05:09 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-08 22:05:09 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-08 22:05:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-08 22:05:09 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-08 22:05:09 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-08 22:05:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-08 22:05:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:05:09 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-08 22:05:09 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-08 22:05:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 22:05:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-08 22:05:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 22:05:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:05:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:05:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:05:10 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-08 22:05:10 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-08 22:05:10 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-08 22:05:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-08 22:05:10 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-08 22:05:10 LOG5 finish_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-08 22:05:10 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-08 22:05:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:05:10 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-08 22:05:10 LOG5 end_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-08 22:05:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-08 22:05:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-08 22:05:10 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-08 22:05:11 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-08 22:05:11 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-08 22:05:11 LOG5 begin_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-08 22:05:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-08 22:05:11 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-08 22:05:11 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-08 22:05:11 START begin_task: Starting task 'selecting calibration port' 2008-Oct-08 22:05:11 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-08 22:05:11 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-08 22:05:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-08 22:05:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:05:11 START begin_task: Starting task 'waiting on calport' 2008-Oct-08 22:05:11 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-08 22:05:11 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-08 22:05:11 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-08 22:05:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:05:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:05:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 22:05:11 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-08 22:05:11 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-08 22:05:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-08 22:05:11 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-08 22:05:11 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-08 22:05:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-08 22:05:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-08 22:05:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:05:11 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-08 22:05:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:05:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:05:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 22:05:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:05:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:05:11 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-08 22:05:11 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-08 22:05:11 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-08 22:05:11 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-08 22:05:11 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-08 22:05:11 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-08 22:05:11 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-08 22:05:11 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-08 22:05:11 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-08 22:05:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 22:05:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 22:05:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 22:05:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 22:05:11 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-08 22:05:11 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-08 22:05:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:05:11 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-08 22:05:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-08 22:05:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-08 22:05:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:05:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 22:05:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 22:05:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:05:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:05:11 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-08 22:05:11 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-08 22:05:11 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-08 22:05:11 LOG5 finish_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-08 22:05:11 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-08 22:05:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:05:12 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-08 22:05:12 LOG5 end_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-08 22:05:12 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 22:05:12 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-08 22:05:12 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-08 22:05:12 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:05:12 LOG5 begin_task: Level: (1) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-08 22:05:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-08 22:05:12 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-08 22:05:12 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-08 22:05:12 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:05:12 LOG5 finish_task: Level: (1) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-08 22:05:12 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-08 22:05:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:05:12 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-08 22:05:12 LOG5 end_task: Level: (1) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-08 22:05:13 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-08 22:05:42 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-08 22:05:42 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-08 22:05:42 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:05:42 LOG5 begin_task: Level: (1) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-08 22:05:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-08 22:05:42 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-08 22:05:42 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-08 22:05:42 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:05:42 LOG5 finish_task: Level: (1) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-08 22:05:42 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-08 22:05:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:05:42 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-08 22:05:42 LOG5 end_task: Level: (1) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-08 22:06:01 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-08 22:06:01 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 224700.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-08 22:06:01 LOG1 track_new_source: Calling 'track_new_source drift41p2 224700.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-08 22:06:01 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-08 22:06:01 LOG5 begin_task: Level: (1) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-08 22:06:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2008-Oct-08 22:06:01 LOG3 track_source: Calling 'track_source drift41p2 224700.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 22:06:01 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 22:06:01 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-08 22:06:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 22:06:02 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 22:06:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:06:02 LOG3 vw_send: To DATATAKING: set ra 224700.0 2008-Oct-08 22:06:02 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 22:06:02 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 22:06:02 LOG3 vw_send: To DATATAKING: pnt tr 224700.0 +095836 -CJ 2008-Oct-08 22:06:02 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:06:02 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 22:06:02 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-08 22:06:02 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 22:06:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:06:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 22:06:02 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-08 22:06:02 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-08 22:06:02 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-08 22:06:02 LOG5 begin_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-08 22:06:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-08 22:06:02 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 22:06:02 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-08 22:06:02 LOG5 finish_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-08 22:06:02 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-08 22:06:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:06:02 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-08 22:06:02 LOG5 end_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-08 22:06:02 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-08 22:06:02 LOG5 finish_task: Level: (1) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-08 22:06:02 DONE finish_task: DONE finished selecting: new source 2008-Oct-08 22:06:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:06:02 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-08 22:06:02 LOG5 end_task: Level: (1) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-08 22:06:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:06:02 LOG4 got_cormsg: From DATATAKING: set ra 224700.0 2008-Oct-08 22:06:02 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 22:06:02 LOG4 got_cormsg: From DATATAKING: vw% 224700.0 2008-Oct-08 22:06:02 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 22:06:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:06:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 22:06:02 LOG4 got_cormsg: From DATATAKING: pnt tr 224700.0 +095836 -CJ 2008-Oct-08 22:06:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:06:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 22:06:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:06:02 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 22:06:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:06:16 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-08 22:06:16 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 225200.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-08 22:06:16 LOG1 track_new_source: Calling 'track_new_source drift41p2 225200.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-08 22:06:16 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-08 22:06:16 LOG5 begin_task: Level: (1) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-08 22:06:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2008-Oct-08 22:06:16 LOG3 track_source: Calling 'track_source drift41p2 225200.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 22:06:16 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 22:06:16 LOG5 begin_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-08 22:06:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 22:06:16 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 22:06:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:06:16 LOG3 vw_send: To DATATAKING: set ra 225200.0 2008-Oct-08 22:06:16 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 22:06:16 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 22:06:16 LOG3 vw_send: To DATATAKING: pnt tr 225200.0 +095836 -CJ 2008-Oct-08 22:06:16 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:06:16 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 22:06:16 LOG5 finish_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-08 22:06:16 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 22:06:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:06:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 22:06:16 LOG5 end_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-08 22:06:16 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-08 22:06:16 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-08 22:06:16 LOG5 begin_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-08 22:06:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-08 22:06:16 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 22:06:16 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-08 22:06:16 LOG5 finish_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-08 22:06:16 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-08 22:06:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:06:16 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-08 22:06:16 LOG5 end_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-08 22:06:16 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-08 22:06:16 LOG5 finish_task: Level: (1) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-08 22:06:16 DONE finish_task: DONE finished selecting: new source 2008-Oct-08 22:06:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:06:16 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-08 22:06:16 LOG5 end_task: Level: (1) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-08 22:06:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:06:16 LOG4 got_cormsg: From DATATAKING: set ra 225200.0 2008-Oct-08 22:06:16 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 22:06:16 LOG4 got_cormsg: From DATATAKING: vw% 225200.0 2008-Oct-08 22:06:16 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 22:06:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:06:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 22:06:16 LOG4 got_cormsg: From DATATAKING: pnt tr 225200.0 +095836 -CJ 2008-Oct-08 22:06:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:06:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 22:06:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:06:16 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 22:06:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:06:53 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-08 22:06:53 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-08 22:06:53 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-08 22:06:53 LOG5 begin_task: Level: (1) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-08 22:06:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-08 22:06:53 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-08 22:06:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-08 22:06:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-08 22:06:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:06:53 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-08 22:06:53 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-08 22:06:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-08 22:06:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:06:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:06:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 22:06:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-08 22:06:56 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-08 22:06:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-08 22:06:56 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-08 22:06:56 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-08 22:06:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-08 22:06:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:06:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:06:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:06:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:06:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-08 22:06:56 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-08 22:06:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-08 22:06:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:06:56 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 4 dB --- beam 1: 5 5 dB 2008-Oct-08 22:06:56 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 4 4 dB 2008-Oct-08 22:06:56 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2008-Oct-08 22:06:56 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 1 2 dB 2008-Oct-08 22:06:56 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-08 22:06:56 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-08 22:06:56 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-08 22:06:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.034 1.109 ALFA beam 1: 1.108 1.098 2008-Oct-08 22:06:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.969 0.940 ALFA beam 3: 1.064 1.007 2008-Oct-08 22:06:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.027 1.059 ALFA beam 5: 1.106 1.089 2008-Oct-08 22:06:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.899 0.868 ALFA beam 7: 1.008 0.959 2008-Oct-08 22:06:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-08 22:06:56 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-08 22:06:56 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Oct-08 22:06:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:06:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-08 22:06:57 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-08 22:06:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-08 22:06:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-08 22:06:57 LOG5 finish_task: Level: (1) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-08 22:06:57 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-08 22:06:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:06:57 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-08 22:06:57 LOG5 end_task: Level: (1) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-08 22:06:58 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Oct-08 22:06:58 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift41p2 225200.0 +095836 J 0 Topocentric velocity(optical) 2008-Oct-08 22:06:58 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift41p2 225200.0 +095836 J 0 Topocentric velocity(optical)' 2008-Oct-08 22:06:58 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Oct-08 22:06:58 LOG5 begin_task: Level: (1) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-08 22:06:58 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift41p2' 2008-Oct-08 22:06:58 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Oct-08 22:06:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift41p2} 2008-Oct-08 22:06:58 INFO5 fixed_driftmap: Start: year = 2008.7745968641468 RA = 22:52:28.0 Dec = +10:01:36.0 2008-Oct-08 22:06:58 NOTE fixed_driftmap: Setting ZA to 8:19:37.7 ... 2008-Oct-08 22:06:58 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 8.33 2008-Oct-08 22:06:58 LOG3 track_source: Calling 'track_source drift41p2 360.0 8.3271310475 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Oct-08 22:06:58 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 22:06:58 LOG5 begin_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-08 22:06:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 22:06:58 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 22:06:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:06:58 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Oct-08 22:06:58 LOG3 vw_send: To DATATAKING: set dec 8.3271310475 2008-Oct-08 22:06:59 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 22:06:59 LOG3 vw_send: To DATATAKING: pnt tr 360.0 8.3271310475 -CF 2008-Oct-08 22:06:59 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:06:59 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 22:06:59 LOG5 finish_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-08 22:06:59 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 22:06:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:06:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 22:06:59 LOG5 end_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-08 22:06:59 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:06:59 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-08 22:06:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-08 22:06:59 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-08 22:06:59 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Oct-08 22:06:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-08 22:06:59 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-08 22:06:59 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-08 22:06:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:06:59 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Oct-08 22:06:59 LOG4 got_cormsg: From DATATAKING: set dec 8.3271310475 2008-Oct-08 22:06:59 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Oct-08 22:06:59 LOG4 got_cormsg: From DATATAKING: vw% 8.3271310475 2008-Oct-08 22:06:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:06:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 22:06:59 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 8.3271310475 -CF 2008-Oct-08 22:06:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:06:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 22:06:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:08:37 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Oct-08 22:08:37 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Oct-08 22:08:37 WARNING abort_task: WARNING abort requested! 2008-Oct-08 22:08:37 WARNING abort_task: WARNING Aborting wait for waiting on ALFA rotation 2008-Oct-08 22:08:37 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'ABORT' 2008-Oct-08 22:08:37 LOG5 end_task: Level: (3) ID = <10138> Status = 1 0 0 0 abort 2008-Oct-08 22:08:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-08 22:08:37 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:08:37 LOG5 finish_task: Level: (2) ID = <10137> Status = 1 0 0 0 abort 2008-Oct-08 22:08:37 WARNING finish_task: WARNING aborted configuration: rotating ALFA to +19 degrees 2008-Oct-08 22:08:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2008-Oct-08 22:08:37 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'ABORT' 2008-Oct-08 22:08:37 LOG5 end_task: Level: (2) ID = <10137> Status = 1 0 0 0 abort 2008-Oct-08 22:08:37 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Oct-08 22:08:37 LOG5 finish_task: Level: (1) ID = <10135> Status = 1 0 0 0 abort 2008-Oct-08 22:08:37 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-Oct-08 22:08:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Oct-08 22:08:37 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-Oct-08 22:08:37 LOG5 end_task: Level: (1) ID = <10135> Status = 1 0 0 0 abort 2008-Oct-08 22:11:11 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-08 22:11:11 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-08 22:11:11 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-08 22:11:11 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-08 22:11:11 LOG5 begin_task: Level: (1) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-08 22:11:11 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-08 22:11:11 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-08 22:11:11 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-08 22:11:11 LOG5 end_task: Level: (1) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-08 22:11:11 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 22:11:11 LOG3 exec_msg: Closing socket 2008-Oct-08 22:11:11 LOG3 exec_msg: Closing socket 2008-Oct-08 22:11:11 LOG3 exec_msg: Closing socket 2008-Oct-08 22:11:11 LOG3 exec_msg: Closing socket 2008-Oct-08 22:11:13 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-08 22:11:13 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-08 22:11:13 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-08 22:11:13 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-08 22:11:21 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-08 22:11:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 22:11:23 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-08 22:11:23 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-08 22:11:23 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-08 22:11:23 LOG5 begin_task: Level: (1) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-08 22:11:23 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-08 22:11:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-08 22:11:23 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-08 22:11:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 22:11:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:11:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 22:11:23 LOG5 begin_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-08 22:11:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 22:11:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 22:11:23 LOG5 end_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-08 22:11:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 22:11:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:11:23 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-08 22:11:23 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-08 22:11:23 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-08 22:11:23 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-08 22:11:23 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-08 22:11:23 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-08 22:11:23 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-08 22:11:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 22:11:24 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-08 22:11:24 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-08 22:11:24 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-08 22:11:24 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-08 22:11:24 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-08 22:11:24 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-08 22:11:24 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-08 22:11:24 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-08 22:11:24 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-08 22:11:24 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-08 22:11:24 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-08 22:11:24 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-08 22:11:24 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-08 22:11:24 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-08 22:11:24 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-08 22:11:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 22:11:24 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-08 22:11:24 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-08 22:11:24 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-08 22:11:24 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-08 22:11:24 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-08 22:11:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-08 22:11:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:11:24 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-08 22:11:24 LOG5 begin_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-08 22:11:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 22:11:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-08 22:11:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 22:11:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:11:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:11:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:11:24 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-08 22:11:24 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-08 22:11:24 LOG5 end_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-08 22:11:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-08 22:11:24 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-08 22:11:24 LOG5 finish_task: Level: (1) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-08 22:11:24 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-08 22:11:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:11:24 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-08 22:11:24 LOG5 end_task: Level: (1) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-08 22:11:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:11:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-08 22:11:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-08 22:11:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-08 22:11:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-08 22:11:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-08 22:11:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-08 22:11:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-08 22:11:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-08 22:11:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-08 22:11:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-08 22:11:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-08 22:11:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-08 22:11:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-08 22:11:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-08 22:11:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-08 22:11:25 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-08 22:11:25 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-08 22:11:25 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-08 22:11:25 LOG5 begin_task: Level: (1) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-08 22:11:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-08 22:11:25 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-08 22:11:25 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-08 22:11:25 START begin_task: Starting task 'selecting calibration port' 2008-Oct-08 22:11:25 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-08 22:11:25 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-08 22:11:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-08 22:11:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:11:25 START begin_task: Starting task 'waiting on calport' 2008-Oct-08 22:11:25 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-08 22:11:25 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-08 22:11:25 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-08 22:11:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:11:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:11:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 22:11:25 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-08 22:11:25 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-08 22:11:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-08 22:11:25 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-08 22:11:25 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-08 22:11:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-08 22:11:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-08 22:11:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:11:25 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-08 22:11:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:11:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:11:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 22:11:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:11:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:11:25 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-08 22:11:25 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-08 22:11:25 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-08 22:11:25 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-08 22:11:25 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-08 22:11:25 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-08 22:11:25 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-08 22:11:25 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-08 22:11:25 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-08 22:11:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 22:11:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 22:11:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 22:11:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 22:11:26 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-08 22:11:26 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-08 22:11:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:11:26 LOG5 begin_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-08 22:11:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-08 22:11:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:11:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-08 22:11:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 22:11:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 22:11:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:11:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:11:26 LOG5 end_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-08 22:11:26 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-08 22:11:26 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-08 22:11:26 LOG5 finish_task: Level: (1) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-08 22:11:26 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-08 22:11:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:11:26 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-08 22:11:26 LOG5 end_task: Level: (1) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-08 22:11:26 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-08 22:11:26 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-08 22:11:26 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-08 22:11:26 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:11:26 LOG5 begin_task: Level: (1) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-08 22:11:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-08 22:11:26 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-08 22:11:26 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-08 22:11:26 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:11:26 LOG5 finish_task: Level: (1) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-08 22:11:26 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-08 22:11:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:11:26 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-08 22:11:26 LOG5 end_task: Level: (1) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-08 22:11:27 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-08 22:11:27 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-08 22:11:27 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-08 22:11:49 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-08 22:11:49 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 225800.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-08 22:11:49 LOG1 track_new_source: Calling 'track_new_source drift41p2 225800.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-08 22:11:49 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-08 22:11:49 LOG5 begin_task: Level: (1) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-08 22:11:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2008-Oct-08 22:11:49 LOG3 track_source: Calling 'track_source drift41p2 225800.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 22:11:49 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 22:11:49 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-08 22:11:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 22:11:49 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 22:11:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:11:49 LOG3 vw_send: To DATATAKING: set ra 225800.0 2008-Oct-08 22:11:49 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 22:11:49 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 22:11:49 LOG3 vw_send: To DATATAKING: pnt tr 225800.0 +095836 -CJ 2008-Oct-08 22:11:49 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:11:49 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 22:11:49 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-08 22:11:49 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 22:11:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:11:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 22:11:49 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-08 22:11:49 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-08 22:11:49 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-08 22:11:49 LOG5 begin_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-08 22:11:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-08 22:11:49 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 22:11:49 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-08 22:11:49 LOG5 finish_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-08 22:11:49 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-08 22:11:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:11:49 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-08 22:11:49 LOG5 end_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-08 22:11:49 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-08 22:11:49 LOG5 finish_task: Level: (1) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-08 22:11:49 DONE finish_task: DONE finished selecting: new source 2008-Oct-08 22:11:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:11:49 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-08 22:11:49 LOG5 end_task: Level: (1) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-08 22:11:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:11:49 LOG4 got_cormsg: From DATATAKING: set ra 225800.0 2008-Oct-08 22:11:49 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 22:11:49 LOG4 got_cormsg: From DATATAKING: vw% 225800.0 2008-Oct-08 22:11:49 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 22:11:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:11:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 22:11:49 LOG4 got_cormsg: From DATATAKING: pnt tr 225800.0 +095836 -CJ 2008-Oct-08 22:11:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:11:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 22:11:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:11:49 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 22:11:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:11:51 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-08 22:11:51 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 225800.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-08 22:11:51 LOG1 track_new_source: Calling 'track_new_source drift41p2 225800.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-08 22:11:51 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-08 22:11:51 LOG5 begin_task: Level: (1) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-08 22:11:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2008-Oct-08 22:11:51 LOG3 track_source: Calling 'track_source drift41p2 225800.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 22:11:51 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 22:11:51 LOG5 begin_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-08 22:11:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 22:11:51 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 22:11:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:11:51 LOG3 vw_send: To DATATAKING: set ra 225800.0 2008-Oct-08 22:11:51 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 22:11:51 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 22:11:51 LOG3 vw_send: To DATATAKING: pnt tr 225800.0 +095836 -CJ 2008-Oct-08 22:11:51 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:11:51 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 22:11:51 LOG5 finish_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-08 22:11:51 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 22:11:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:11:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 22:11:51 LOG5 end_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-08 22:11:51 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-08 22:11:51 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-08 22:11:51 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-08 22:11:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-08 22:11:51 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 22:11:51 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-08 22:11:51 LOG5 finish_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-08 22:11:51 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-08 22:11:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:11:51 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-08 22:11:51 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-08 22:11:51 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-08 22:11:51 LOG5 finish_task: Level: (1) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-08 22:11:51 DONE finish_task: DONE finished selecting: new source 2008-Oct-08 22:11:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:11:51 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-08 22:11:51 LOG5 end_task: Level: (1) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-08 22:11:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:11:51 LOG4 got_cormsg: From DATATAKING: set ra 225800.0 2008-Oct-08 22:11:51 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 22:11:51 LOG4 got_cormsg: From DATATAKING: vw% 225800.0 2008-Oct-08 22:11:51 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 22:11:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:11:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 22:11:51 LOG4 got_cormsg: From DATATAKING: pnt tr 225800.0 +095836 -CJ 2008-Oct-08 22:11:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:11:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 22:11:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:11:51 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 22:11:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:03 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-08 22:12:03 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 225800.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-08 22:12:03 LOG1 track_new_source: Calling 'track_new_source drift41p2 225800.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-08 22:12:03 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-08 22:12:03 LOG5 begin_task: Level: (1) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-08 22:12:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2008-Oct-08 22:12:03 LOG3 track_source: Calling 'track_source drift41p2 225800.0 +095836 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-08 22:12:03 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 22:12:03 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-08 22:12:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 22:12:03 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 22:12:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:12:03 LOG3 vw_send: To DATATAKING: set ra 225800.0 2008-Oct-08 22:12:03 LOG3 vw_send: To DATATAKING: set dec +095836 2008-Oct-08 22:12:03 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 22:12:03 LOG3 vw_send: To DATATAKING: pnt tr 225800.0 +095836 -CJ 2008-Oct-08 22:12:03 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:12:03 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 22:12:03 LOG5 finish_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-08 22:12:03 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 22:12:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:12:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 22:12:03 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-08 22:12:03 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-08 22:12:03 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-08 22:12:03 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-08 22:12:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-08 22:12:03 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 22:12:03 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-08 22:12:03 LOG5 finish_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-08 22:12:03 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-08 22:12:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:12:03 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-08 22:12:03 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-08 22:12:03 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-08 22:12:03 LOG5 finish_task: Level: (1) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-08 22:12:03 DONE finish_task: DONE finished selecting: new source 2008-Oct-08 22:12:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:12:03 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-08 22:12:03 LOG5 end_task: Level: (1) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-08 22:12:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:12:03 LOG4 got_cormsg: From DATATAKING: set ra 225800.0 2008-Oct-08 22:12:03 LOG4 got_cormsg: From DATATAKING: set dec +095836 2008-Oct-08 22:12:03 LOG4 got_cormsg: From DATATAKING: vw% 225800.0 2008-Oct-08 22:12:03 LOG4 got_cormsg: From DATATAKING: vw% +095836 2008-Oct-08 22:12:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 22:12:03 LOG4 got_cormsg: From DATATAKING: pnt tr 225800.0 +095836 -CJ 2008-Oct-08 22:12:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:12:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 22:12:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:03 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-08 22:12:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:11 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-08 22:12:11 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-08 22:12:11 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-08 22:12:11 LOG5 begin_task: Level: (1) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-08 22:12:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-08 22:12:11 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-08 22:12:11 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-08 22:12:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-08 22:12:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:12:11 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-08 22:12:11 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-08 22:12:11 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-08 22:12:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:12:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 22:12:14 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-08 22:12:14 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-08 22:12:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-08 22:12:14 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-08 22:12:14 LOG5 begin_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-08 22:12:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-08 22:12:14 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:12:14 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:12:14 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:12:14 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:12:14 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-08 22:12:14 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-08 22:12:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-08 22:12:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:15 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 4 dB --- beam 1: 5 5 dB 2008-Oct-08 22:12:15 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 4 4 dB 2008-Oct-08 22:12:15 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2008-Oct-08 22:12:15 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 1 2 dB 2008-Oct-08 22:12:15 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-08 22:12:15 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-08 22:12:15 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-08 22:12:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.036 1.109 ALFA beam 1: 1.109 1.100 2008-Oct-08 22:12:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.965 0.945 ALFA beam 3: 1.063 1.021 2008-Oct-08 22:12:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.037 1.059 ALFA beam 5: 1.107 1.088 2008-Oct-08 22:12:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.906 0.871 ALFA beam 7: 1.012 0.964 2008-Oct-08 22:12:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-08 22:12:15 LOG5 finish_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-08 22:12:15 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Oct-08 22:12:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:12:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-08 22:12:15 LOG5 end_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-08 22:12:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-08 22:12:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-08 22:12:15 LOG5 finish_task: Level: (1) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-08 22:12:15 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-08 22:12:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-08 22:12:15 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-08 22:12:15 LOG5 end_task: Level: (1) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-08 22:12:18 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2008-Oct-08 22:12:18 LOG4 exec_msg: From OBSERVER: new_file manual 2008-Oct-08 22:12:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 22:12:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 22:12:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 22:12:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 22:12:18 NOTE new_file: There is no need to start a new FITS-file since the current one 'wapp.20081008.a2010.0016.fits' is empty! 2008-Oct-08 22:12:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 22:12:21 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Oct-08 22:12:21 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift41p2 225800.0 +095836 J 0 Topocentric velocity(optical) 2008-Oct-08 22:12:21 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift41p2 225800.0 +095836 J 0 Topocentric velocity(optical)' 2008-Oct-08 22:12:21 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Oct-08 22:12:21 LOG5 begin_task: Level: (1) ID = <10162> Status = 0 0 0 0 ok 2008-Oct-08 22:12:21 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift41p2' 2008-Oct-08 22:12:21 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Oct-08 22:12:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift41p2} 2008-Oct-08 22:12:21 INFO5 fixed_driftmap: Start: year = 2008.774607067711 RA = 22:58:28.1 Dec = +10:01:37.5 2008-Oct-08 22:12:21 NOTE fixed_driftmap: Setting ZA to 8:19:36.2 ... 2008-Oct-08 22:12:21 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 8.33 2008-Oct-08 22:12:21 LOG3 track_source: Calling 'track_source drift41p2 360.0 8.3267354261 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Oct-08 22:12:21 START begin_task: Starting task 'sending tracking commands' 2008-Oct-08 22:12:21 LOG5 begin_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-08 22:12:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2008-Oct-08 22:12:21 INFO1 track_source: Starting to track drift41p2 2008-Oct-08 22:12:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:12:21 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Oct-08 22:12:21 LOG3 vw_send: To DATATAKING: set dec 8.3267354261 2008-Oct-08 22:12:21 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-08 22:12:21 LOG3 vw_send: To DATATAKING: pnt tr 360.0 8.3267354261 -CF 2008-Oct-08 22:12:21 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:12:21 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-08 22:12:21 LOG5 finish_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-08 22:12:21 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-08 22:12:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:12:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-08 22:12:21 LOG5 end_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-08 22:12:21 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:12:21 LOG5 begin_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-08 22:12:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-08 22:12:21 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-08 22:12:21 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Oct-08 22:12:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-08 22:12:21 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-08 22:12:21 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-08 22:12:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2008-Oct-08 22:12:21 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Oct-08 22:12:21 LOG4 got_cormsg: From DATATAKING: set dec 8.3267354261 2008-Oct-08 22:12:21 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Oct-08 22:12:21 LOG4 got_cormsg: From DATATAKING: vw% 8.3267354261 2008-Oct-08 22:12:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-08 22:12:21 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 8.3267354261 -CF 2008-Oct-08 22:12:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-08 22:12:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-08 22:12:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:22 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-08 22:12:22 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-08 22:12:22 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-08 22:12:22 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-08 22:12:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-08 22:12:22 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-08 22:12:22 LOG5 finish_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-08 22:12:22 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-08 22:12:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:12:22 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-08 22:12:22 LOG5 end_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-08 22:12:22 START begin_task: Starting task 'waiting on telescope' 2008-Oct-08 22:12:22 LOG5 begin_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-08 22:12:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-08 22:12:22 LOG3 waittrk: Start waittrk 5 2008-Oct-08 22:12:22 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-08 22:12:22 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-08 22:12:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-08 22:12:27 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-08 22:12:27 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-08 22:12:27 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-08 22:12:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-08 22:12:40 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-08 22:12:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-08 22:12:40 INFO2 waittrk: Now tracking drift41p2 2008-Oct-08 22:12:40 LOG4 waittrk: Current telescope position: Az = 359.62 ZA = 8.29 2008-Oct-08 22:12:40 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-08 22:12:40 LOG5 finish_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-08 22:12:40 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Oct-08 22:12:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:12:40 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-08 22:12:40 LOG5 end_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-08 22:12:40 START begin_task: Starting task 'selecting calibration type' 2008-Oct-08 22:12:40 LOG5 begin_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-08 22:12:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-08 22:12:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-08 22:12:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:12:40 START begin_task: Starting task 'waiting on setcal' 2008-Oct-08 22:12:40 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-Oct-08 22:12:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-08 22:12:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:12:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 22:12:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-08 22:12:40 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-Oct-08 22:12:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-08 22:12:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 22:12:40 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-08 22:12:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 22:12:40 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Oct-08 22:12:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:40 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 22:12:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 22:12:40 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Oct-08 22:12:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 22:12:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-08 22:12:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 22:12:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:12:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 22:12:40 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-08 22:12:40 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 22:12:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 22:12:40 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-08 22:12:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 22:12:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:12:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-08 22:12:40 LOG5 end_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-08 22:12:40 LOG5 dopset_later: Calling 'dopset_later 31.720180455232956' 2008-Oct-08 22:12:40 INFO3 dopset_later: Setting Doppler correction for 22:13:12 (31.7 seconds from now) 2008-Oct-08 22:12:40 LOG5 antvel: Calling 'antvel 360.000000 8.326735 F 31.720180455232956' 2008-Oct-08 22:12:40 LOG2 antvel: Transforming current Az = 360.00 ZA = 8.33 to apparent RA = 22:58:28.0 Dec = +10:01:37.5 2008-Oct-08 22:12:40 LOG2 antvel: Parameters to Doppler: Topocentric 94392 2008 282 0.0 2008-Oct-08 22:12:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-08 22:12:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-08 22:12:40 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-08 22:12:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-08 22:12:40 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-08 22:12:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 22:12:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 22:12:40 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-08 22:12:40 LOG5 begin_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-08 22:12:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-08 22:12:40 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-08 22:12:40 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-08 22:12:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-08 22:12:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:12:40 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-08 22:12:40 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-08 22:12:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-08 22:12:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-08 22:12:41 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-08 22:12:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:12:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:43 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 22:12:43 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-08 22:12:43 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-08 22:12:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-08 22:12:43 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-08 22:12:43 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-08 22:12:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-08 22:12:43 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:12:43 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:12:43 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:12:44 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-08 22:12:44 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-08 22:12:44 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-08 22:12:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-08 22:12:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:12:44 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 4 dB --- beam 1: 5 5 dB 2008-Oct-08 22:12:44 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 4 4 dB 2008-Oct-08 22:12:44 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2008-Oct-08 22:12:44 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 1 2 dB 2008-Oct-08 22:12:44 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-08 22:12:44 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-08 22:12:44 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-08 22:12:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.034 1.112 ALFA beam 1: 1.111 1.098 2008-Oct-08 22:12:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.966 0.964 ALFA beam 3: 1.079 1.039 2008-Oct-08 22:12:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.053 1.084 ALFA beam 5: 1.107 1.092 2008-Oct-08 22:12:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.929 0.900 ALFA beam 7: 1.032 0.992 2008-Oct-08 22:12:44 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-08 22:12:44 LOG5 finish_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-08 22:12:44 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-08 22:12:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:12:44 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-08 22:12:44 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-08 22:12:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-08 22:12:44 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-08 22:12:44 LOG5 finish_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-08 22:12:44 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-08 22:12:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:12:44 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-08 22:12:44 LOG5 end_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-08 22:12:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 22:12:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 22:12:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 22:12:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 22:12:44 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081008.a2010.0016.fits' is empty! 2008-Oct-08 22:12:44 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 22:58:28.1 LST = 22:58:00.3 diff = 27.8 secs 2008-Oct-08 22:12:44 INFO2 fixed_driftmap: Waiting 25.8 seconds for RA 22:58:28 2008-Oct-08 22:12:44 INFO2 lstwait: Waiting for 25.7 secs from LST 22:58:00 to LST 22:58:26 ... 2008-Oct-08 22:12:44 LOG4 send_obs_status: To obs_status: <1> TASKTIME 25.726191251394823 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Oct-08 22:12:44 START begin_task: Starting task 'waiting on wait on LST' 2008-Oct-08 22:12:44 LOG5 begin_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-08 22:12:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 22:13:10 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Oct-08 22:13:10 LOG5 end_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-08 22:13:10 LOG4 lstwait: Finished waiting 0.27 seconds late 2008-Oct-08 22:13:10 INFO3 lstwait: Finished waiting 2008-Oct-08 22:13:10 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-08 22:13:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Oct-08 22:13:10 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-08 22:13:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-08 22:13:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-08 22:13:10 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-08 22:13:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-08 22:13:10 LOG5 begin_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-08 22:13:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-08 22:13:10 INFO2 take_data: Starting WAPP scan: 828200159 2008-Oct-08 22:13:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-08 22:13:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-08 22:13:11 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-08 22:13:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-08 22:13:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7992.00 2008-Oct-08 22:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-08 22:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-08 22:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-08 22:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-08 22:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-08 22:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:13:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:13:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:13:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:13:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:13:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:13:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:13:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:13:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:13:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:13:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:13:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-08 22:13:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:13:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:13:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:13:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:13:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:13:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:13:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:13:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:13:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:13:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-08 22:13:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:13:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:13:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:13:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:13:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:13:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:13:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-08 22:13:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:13:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:13:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:13:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:13:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:13:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:14:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:14:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:14:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:14:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:14:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:14:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:14:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:14:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:14:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:14:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:14:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:14:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:14:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-08 22:14:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:14:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:14:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:14:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:14:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:14:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:14:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:15:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:15:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:15:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:15:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-08 22:15:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:15:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:15:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:15:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:15:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:15:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:15:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:15:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:15:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:15:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:15:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:15:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:15:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:15:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:16:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:16:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:16:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:16:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-08 22:16:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:16:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:16:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:16:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:16:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-08 22:16:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:16:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:16:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:16:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:17:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:17:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:17:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:17:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:17:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:17:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:17:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:18:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:18:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:18:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:18:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:18:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:18:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:18:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:18:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:18:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:18:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:18:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:18:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:18:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:18:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:18:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:18:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:18:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:19:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:19:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:19:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-08 22:20:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:20:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:20:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:20:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:20:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:20:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:20:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:20:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:20:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:20:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:20:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:20:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:20:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-08 22:20:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:20:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:20:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:20:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:20:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:21:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:21:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:21:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:21:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:21:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:21:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:21:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:21:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:21:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:21:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:21:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:21:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:21:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:21:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:21:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:23:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-08 22:23:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-08 22:23:12 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-08 22:23:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-08 22:23:12 LOG5 end_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-08 22:23:12 LOG1 fixed_driftmap: New position: year = 2008.7746277283443 RA = 23:08:02.5 RA/Dec = 23:08:30.7 +10:01:39.6 2008-Oct-08 22:23:12 NOTE fixed_driftmap: Correcting ZA to 8:19:34.1 ... 2008-Oct-08 22:23:12 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 8.3261475003 -CF 2008-Oct-08 22:23:12 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-08 22:23:12 START begin_task: Starting task 'WAPP calibration' 2008-Oct-08 22:23:12 LOG5 begin_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-08 22:23:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-08 22:23:12 START begin_task: Starting task 'selecting calibration type' 2008-Oct-08 22:23:12 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2008-Oct-08 22:23:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-08 22:23:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-08 22:23:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:23:12 START begin_task: Starting task 'waiting on setcal' 2008-Oct-08 22:23:12 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Oct-08 22:23:12 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 8.3261475003 -CF 2008-Oct-08 22:23:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:23:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-08 22:23:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:23:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:23:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 22:23:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-08 22:23:12 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Oct-08 22:23:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-08 22:23:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 22:23:12 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-08 22:23:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 22:23:12 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Oct-08 22:23:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:23:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 22:23:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 22:23:12 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Oct-08 22:23:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 22:23:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-08 22:23:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 22:23:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:23:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 22:23:13 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Oct-08 22:23:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 22:23:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 22:23:13 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Oct-08 22:23:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 22:23:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:23:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-08 22:23:13 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2008-Oct-08 22:23:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-08 22:23:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-08 22:23:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-08 22:23:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:23:13 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2008-Oct-08 22:23:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:23:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-08 22:23:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:23:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:23:13 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2008-Oct-08 22:23:13 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-08 22:23:13 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-08 22:23:13 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-08 22:23:13 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Oct-08 22:23:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-08 22:23:13 INFO2 take_data: Starting WAPP scan: 828200160 2008-Oct-08 22:23:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-08 22:23:13 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-08 22:23:13 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2008-Oct-08 22:23:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-08 22:23:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8594.00 2008-Oct-08 22:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-08 22:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-08 22:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-08 22:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-08 22:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-08 22:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:23:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-08 22:23:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-08 22:23:15 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2008-Oct-08 22:23:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-08 22:23:15 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Oct-08 22:23:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-08 22:23:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-08 22:23:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-08 22:23:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:23:15 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Oct-08 22:23:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:23:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 22:23:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:23:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:23:16 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Oct-08 22:23:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-08 22:23:16 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-08 22:23:16 LOG5 finish_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-08 22:23:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-08 22:23:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:23:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-08 22:23:16 LOG5 end_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-08 22:23:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Oct-08 22:23:16 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-08 22:23:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 22:23:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 22:23:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 22:23:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 22:23:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-08 22:23:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-08 22:23:16 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-08 22:23:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-08 22:23:16 LOG5 begin_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2008-Oct-08 22:23:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-08 22:23:16 INFO2 take_data: Starting WAPP scan: 828200161 2008-Oct-08 22:23:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-08 22:23:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-08 22:23:16 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Oct-08 22:23:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 22:23:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-08 22:23:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8597.00 2008-Oct-08 22:23:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20081008.a2010.0017.fits 2008-Oct-08 22:23:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081008.a2010.0017.fits} 2008-Oct-08 22:23:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-08 22:23:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-08 22:23:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-08 22:23:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-08 22:23:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-08 22:23:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:23:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:23:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:23:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:33:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-08 22:33:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-08 22:33:17 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Oct-08 22:33:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-08 22:33:17 LOG5 end_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2008-Oct-08 22:33:17 LOG1 fixed_driftmap: New position: year = 2008.7746468996374 RA = 23:18:09.0 RA/Dec = 23:18:37.3 +10:01:41.4 2008-Oct-08 22:33:17 NOTE fixed_driftmap: Correcting ZA to 8:19:32.3 ... 2008-Oct-08 22:33:17 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 8.3256503750 -CF 2008-Oct-08 22:33:17 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-08 22:33:17 START begin_task: Starting task 'WAPP calibration' 2008-Oct-08 22:33:17 LOG5 begin_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2008-Oct-08 22:33:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-08 22:33:17 START begin_task: Starting task 'selecting calibration type' 2008-Oct-08 22:33:17 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-Oct-08 22:33:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-08 22:33:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-08 22:33:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:33:17 START begin_task: Starting task 'waiting on setcal' 2008-Oct-08 22:33:17 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Oct-08 22:33:17 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 8.3256503750 -CF 2008-Oct-08 22:33:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:33:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-08 22:33:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:33:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:33:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 22:33:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-08 22:33:18 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Oct-08 22:33:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-08 22:33:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 22:33:18 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-08 22:33:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 22:33:18 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Oct-08 22:33:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:33:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 22:33:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 22:33:18 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Oct-08 22:33:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 22:33:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-08 22:33:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 22:33:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:33:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 22:33:18 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Oct-08 22:33:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 22:33:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 22:33:18 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Oct-08 22:33:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 22:33:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:33:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-08 22:33:18 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-Oct-08 22:33:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-08 22:33:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-08 22:33:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-08 22:33:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:33:18 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2008-Oct-08 22:33:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:33:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-08 22:33:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:33:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:33:18 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2008-Oct-08 22:33:18 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-08 22:33:18 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-08 22:33:18 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-08 22:33:18 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Oct-08 22:33:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-08 22:33:18 INFO2 take_data: Starting WAPP scan: 828200162 2008-Oct-08 22:33:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-08 22:33:18 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-08 22:33:18 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2008-Oct-08 22:33:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-08 22:33:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9199.00 2008-Oct-08 22:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-08 22:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-08 22:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-08 22:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-08 22:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-08 22:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:33:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-08 22:33:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-08 22:33:20 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2008-Oct-08 22:33:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-08 22:33:20 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Oct-08 22:33:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-08 22:33:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-08 22:33:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-08 22:33:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:33:20 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Oct-08 22:33:20 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:33:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 22:33:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:33:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:33:20 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Oct-08 22:33:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-08 22:33:20 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-08 22:33:20 LOG5 finish_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2008-Oct-08 22:33:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-08 22:33:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:33:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-08 22:33:20 LOG5 end_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2008-Oct-08 22:33:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Oct-08 22:33:20 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Oct-08 22:33:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 22:33:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 22:33:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 22:33:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 22:33:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-08 22:33:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-08 22:33:21 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-08 22:33:21 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-08 22:33:21 LOG5 begin_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2008-Oct-08 22:33:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-08 22:33:21 INFO2 take_data: Starting WAPP scan: 828200163 2008-Oct-08 22:33:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-08 22:33:21 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-08 22:33:21 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Oct-08 22:33:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 22:33:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-08 22:33:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9202.00 2008-Oct-08 22:33:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20081008.a2010.0018.fits 2008-Oct-08 22:33:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081008.a2010.0018.fits} 2008-Oct-08 22:33:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-08 22:33:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-08 22:33:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-08 22:33:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-08 22:33:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-08 22:33:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:33:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:33:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:33:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:43:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-08 22:43:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-08 22:43:22 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Oct-08 22:43:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-08 22:43:22 LOG5 end_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2008-Oct-08 22:43:22 LOG1 fixed_driftmap: New position: year = 2008.7746660709306 RA = 23:28:15.5 RA/Dec = 23:28:44.0 +10:01:42.8 2008-Oct-08 22:43:22 NOTE fixed_driftmap: Correcting ZA to 8:19:30.9 ... 2008-Oct-08 22:43:22 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 8.3252493014 -CF 2008-Oct-08 22:43:22 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-08 22:43:22 START begin_task: Starting task 'WAPP calibration' 2008-Oct-08 22:43:22 LOG5 begin_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Oct-08 22:43:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-08 22:43:22 START begin_task: Starting task 'selecting calibration type' 2008-Oct-08 22:43:22 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Oct-08 22:43:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-08 22:43:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-08 22:43:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:43:22 START begin_task: Starting task 'waiting on setcal' 2008-Oct-08 22:43:22 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Oct-08 22:43:22 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 8.3252493014 -CF 2008-Oct-08 22:43:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:43:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-08 22:43:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:43:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:43:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 22:43:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-08 22:43:22 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Oct-08 22:43:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-08 22:43:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 22:43:22 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-08 22:43:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 22:43:22 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Oct-08 22:43:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:43:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 22:43:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 22:43:23 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Oct-08 22:43:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 22:43:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-08 22:43:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 22:43:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:43:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 22:43:23 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Oct-08 22:43:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 22:43:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 22:43:23 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Oct-08 22:43:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 22:43:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:43:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-08 22:43:23 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-Oct-08 22:43:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-08 22:43:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-08 22:43:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-08 22:43:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:43:23 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2008-Oct-08 22:43:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:43:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-08 22:43:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:43:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:43:23 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2008-Oct-08 22:43:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-08 22:43:23 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-08 22:43:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-08 22:43:23 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Oct-08 22:43:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-08 22:43:23 INFO2 take_data: Starting WAPP scan: 828200164 2008-Oct-08 22:43:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-08 22:43:23 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-08 22:43:23 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2008-Oct-08 22:43:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-08 22:43:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9804.00 2008-Oct-08 22:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-08 22:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-08 22:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-08 22:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-08 22:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-08 22:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:43:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-08 22:43:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-08 22:43:25 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2008-Oct-08 22:43:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-08 22:43:25 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Oct-08 22:43:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-08 22:43:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-08 22:43:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-08 22:43:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:43:25 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Oct-08 22:43:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:43:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 22:43:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:43:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:43:25 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Oct-08 22:43:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-08 22:43:25 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-08 22:43:25 LOG5 finish_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Oct-08 22:43:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-08 22:43:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:43:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-08 22:43:25 LOG5 end_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2008-Oct-08 22:43:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Oct-08 22:43:25 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Oct-08 22:43:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 22:43:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 22:43:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 22:43:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 22:43:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-08 22:43:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-08 22:43:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-08 22:43:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-08 22:43:26 LOG5 begin_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2008-Oct-08 22:43:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-08 22:43:26 INFO2 take_data: Starting WAPP scan: 828200165 2008-Oct-08 22:43:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-08 22:43:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-08 22:43:26 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Oct-08 22:43:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 22:43:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-08 22:43:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9807.00 2008-Oct-08 22:43:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20081008.a2010.0019.fits 2008-Oct-08 22:43:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081008.a2010.0019.fits} 2008-Oct-08 22:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-08 22:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-08 22:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-08 22:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-08 22:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-08 22:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:43:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:45:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:45:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:45:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:45:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999967)! 2008-Oct-08 22:45:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:45:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:45:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:46:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:46:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-08 22:46:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:46:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:46:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:46:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:46:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:46:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:46:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-08 22:46:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:46:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-08 22:46:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-08 22:46:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-08 22:46:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:46:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 8 (99999966 != 99999967)! 2008-Oct-08 22:46:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:46:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:46:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:46:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-08 22:46:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:46:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:46:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-08 22:46:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:46:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:46:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:46:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:46:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:46:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:46:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-08 22:46:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:46:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:46:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:47:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:47:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:47:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:47:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:47:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:47:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:47:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:47:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:47:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:47:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:47:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:47:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:47:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:47:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:47:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:47:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:47:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:47:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:47:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:47:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:47:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:47:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 4 (99999966 != 99999967)! 2008-Oct-08 22:48:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:48:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:48:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:48:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 10 (99999966 != 99999967)! 2008-Oct-08 22:49:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:49:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:49:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 11 (99999966 != 99999967)! 2008-Oct-08 22:49:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:49:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:49:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:49:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:49:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:49:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:49:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:49:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:49:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:49:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:49:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:49:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:49:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:49:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:50:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:50:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:50:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:50:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:50:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:50:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:50:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:50:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:50:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:50:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:50:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:50:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:50:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:51:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:51:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:51:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:51:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:16 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 9 (99999966 != 99999967)! 2008-Oct-08 22:52:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:41 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:51 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:52:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:52:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:52:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:53:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:02 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:03 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:53:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:53:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-08 22:53:09 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:53:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:53:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:13 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:53:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:53:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-08 22:53:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-08 22:53:27 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Oct-08 22:53:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-08 22:53:27 LOG5 end_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2008-Oct-08 22:53:27 LOG1 fixed_driftmap: New position: year = 2008.7746852422238 RA = 23:38:22.1 RA/Dec = 23:38:50.6 +10:01:43.9 2008-Oct-08 22:53:27 NOTE fixed_driftmap: Correcting ZA to 8:19:29.8 ... 2008-Oct-08 22:53:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 8.3249450586 -CF 2008-Oct-08 22:53:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-08 22:53:27 START begin_task: Starting task 'WAPP calibration' 2008-Oct-08 22:53:27 LOG5 begin_task: Level: (2) ID = <10213> Status = 0 0 0 0 ok 2008-Oct-08 22:53:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-08 22:53:27 START begin_task: Starting task 'selecting calibration type' 2008-Oct-08 22:53:27 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Oct-08 22:53:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-08 22:53:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-08 22:53:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:53:27 START begin_task: Starting task 'waiting on setcal' 2008-Oct-08 22:53:27 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Oct-08 22:53:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 8.3249450586 -CF 2008-Oct-08 22:53:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:53:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-08 22:53:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-08 22:53:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:53:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-08 22:53:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-08 22:53:27 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Oct-08 22:53:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-08 22:53:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 22:53:28 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-08 22:53:28 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 22:53:28 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Oct-08 22:53:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-08 22:53:28 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 22:53:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 22:53:28 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Oct-08 22:53:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 22:53:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-08 22:53:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-08 22:53:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:53:28 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-08 22:53:28 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Oct-08 22:53:28 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-08 22:53:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-08 22:53:28 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Oct-08 22:53:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-08 22:53:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-08 22:53:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-08 22:53:28 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-Oct-08 22:53:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-08 22:53:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-08 22:53:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-08 22:53:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:53:28 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Oct-08 22:53:28 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:53:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-08 22:53:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:53:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:53:28 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Oct-08 22:53:28 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-08 22:53:28 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-08 22:53:28 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-08 22:53:28 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-Oct-08 22:53:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-08 22:53:28 INFO2 take_data: Starting WAPP scan: 828200166 2008-Oct-08 22:53:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-08 22:53:28 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-08 22:53:28 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Oct-08 22:53:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-08 22:53:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10409.00 2008-Oct-08 22:53:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-08 22:53:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-08 22:53:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-08 22:53:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-08 22:53:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-08 22:53:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:53:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:53:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:53:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:53:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-08 22:53:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:53:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-08 22:53:30 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2008-Oct-08 22:53:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-08 22:53:30 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-Oct-08 22:53:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-08 22:53:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-08 22:53:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-08 22:53:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-08 22:53:30 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Oct-08 22:53:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-08 22:53:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-08 22:53:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-08 22:53:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-08 22:53:30 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Oct-08 22:53:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-08 22:53:30 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-08 22:53:30 LOG5 finish_task: Level: (2) ID = <10213> Status = 0 0 0 0 ok 2008-Oct-08 22:53:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-08 22:53:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-08 22:53:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-08 22:53:30 LOG5 end_task: Level: (2) ID = <10213> Status = 0 0 0 0 ok 2008-Oct-08 22:53:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Oct-08 22:53:31 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Oct-08 22:53:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-08 22:53:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-08 22:53:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-08 22:53:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-08 22:53:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-08 22:53:31 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-08 22:53:31 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-08 22:53:31 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-08 22:53:31 LOG5 begin_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2008-Oct-08 22:53:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-08 22:53:31 INFO2 take_data: Starting WAPP scan: 828200167 2008-Oct-08 22:53:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-08 22:53:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-08 22:53:31 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2008-Oct-08 22:53:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-08 22:53:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-08 22:53:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10412.00 2008-Oct-08 22:53:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20081008.a2010.0020.fits 2008-Oct-08 22:53:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081008.a2010.0020.fits} 2008-Oct-08 22:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-08 22:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Oct-08 22:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Oct-08 22:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Oct-08 22:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Oct-08 22:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-08 22:53:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:53:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:40 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:53:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:44 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:45 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:53:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:48 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:53:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:53 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:53:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:53:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:53:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:54:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:54:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:54:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:54:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:54:05 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:54:07 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:54:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:54:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:54:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:54:17 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:54:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:54:28 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-08 22:54:29 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:54:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-08 22:54:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-08 22:54:35 WARNING WAPP=4-chip_