2008-Oct-06 21:31:45 BEGIN executive: CIMA executive starting ... 2008-Oct-06 21:31:45 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-06 21:31:45 INFO1 executive: Using CIMA version 3.0.04 'next' from 2008-09-30 18:33 2008-Oct-06 21:31:45 INFO4 executive: This is an ON-LINE session 2008-Oct-06 21:31:45 INFO4 executive: This is a REMOTE session 2008-Oct-06 21:31:45 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-06 21:31:45 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Ann Martin' 2008-Oct-06 21:31:45 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081006' 2008-Oct-06 21:31:46 LOG2 log_preferences: Currently applied preferences: 2008-Oct-06 21:31:46 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-06 21:31:46 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-06 21:31:46 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-06 21:31:46 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-06 21:31:46 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-06 21:31:46 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-06 21:31:46 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-06 21:31:46 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-06 21:31:46 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-06 21:31:46 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-06 21:31:46 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-06 21:31:46 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-06 21:31:46 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-06 21:31:46 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-06 21:31:46 ALERT executive: CIMA executive ready 2008-Oct-06 21:31:49 NOTE frontend: CIMA frontend ready 2008-Oct-06 21:31:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:31:49 LOG4 got_cormsg: From DATATAKING: setup 2008-Oct-06 21:31:53 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-06 21:31:53 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-06 21:31:53 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-06 21:31:53 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-06 21:31:53 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-06 21:31:53 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-06 21:31:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-06 21:31:53 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-06 21:31:53 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-06 21:31:53 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-06 21:31:53 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-06 21:31:53 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-06 21:31:53 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-06 21:31:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:31:53 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-06 21:31:53 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Oct-06 21:31:56 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-06 21:31:56 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:31:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:00 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-06 21:32:00 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-06 21:32:00 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-06 21:32:00 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-06 21:32:00 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-06 21:32:00 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-06 21:32:00 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-06 21:32:00 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-06 21:32:00 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-06 21:32:00 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-06 21:32:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:03 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-06 21:32:04 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-06 21:32:04 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-06 21:32:04 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-06 21:32:26 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-06 21:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-06 21:32:28 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-06 21:32:28 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-06 21:32:28 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-06 21:32:28 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-06 21:32:28 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-06 21:32:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-06 21:32:28 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-06 21:32:28 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-06 21:32:28 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-06 21:32:28 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-06 21:32:28 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-06 21:32:28 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-06 21:32:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-06 21:32:29 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-06 21:32:29 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-06 21:32:29 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-06 21:32:29 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-06 21:32:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:32:29 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-06 21:32:29 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-06 21:32:29 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-06 21:32:29 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-06 21:32:29 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-06 21:32:29 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-06 21:32:29 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-06 21:32:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-06 21:32:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 21:32:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-06 21:32:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 21:32:29 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-06 21:32:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 21:32:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 21:32:29 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-06 21:32:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 21:32:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-06 21:32:29 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-06 21:32:29 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-06 21:32:29 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-06 21:32:29 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-06 21:32:29 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-06 21:32:29 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-06 21:32:29 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-06 21:32:29 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-06 21:32:29 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-06 21:32:29 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-06 21:32:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-06 21:32:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:32:29 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-06 21:32:29 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-06 21:32:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:32:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:45 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-06 21:32:45 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-06 21:32:45 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-06 21:32:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-06 21:32:45 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-06 21:32:45 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-06 21:32:45 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-06 21:32:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:32:45 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-06 21:32:45 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-06 21:32:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-06 21:32:46 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-06 21:32:46 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-06 21:32:46 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-06 21:32:46 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-06 21:32:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-06 21:32:46 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-06 21:32:46 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-06 21:32:46 START begin_task: Starting task 'selecting calibration port' 2008-Oct-06 21:32:46 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-06 21:32:46 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-06 21:32:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-06 21:32:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:32:46 START begin_task: Starting task 'waiting on calport' 2008-Oct-06 21:32:46 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-06 21:32:46 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-06 21:32:46 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-06 21:32:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:32:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-06 21:32:46 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-06 21:32:46 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-06 21:32:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-06 21:32:46 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-06 21:32:46 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-06 21:32:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-06 21:32:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-06 21:32:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 21:32:46 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-06 21:32:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 21:32:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:32:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-06 21:32:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 21:32:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 21:32:46 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-06 21:32:46 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-06 21:32:46 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-06 21:32:47 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-06 21:32:47 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-06 21:32:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 21:32:47 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-06 21:32:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 21:32:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-06 21:32:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 21:32:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 21:32:47 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-06 21:32:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-06 21:32:47 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-06 21:32:47 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-06 21:32:47 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-06 21:32:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:32:47 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-06 21:32:47 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-06 21:32:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-06 21:32:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-06 21:32:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-06 21:32:47 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-06 21:32:47 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-06 21:32:47 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-06 21:32:47 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-06 21:32:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-06 21:32:47 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-06 21:32:47 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-06 21:32:47 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-06 21:32:47 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-06 21:32:47 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-06 21:32:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:32:47 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-06 21:32:47 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-06 21:32:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-06 21:32:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20081006.a2010.0016.fits 2008-Oct-06 21:32:48 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081006.a2010.0016.fits} 2008-Oct-06 21:32:48 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-06 21:32:55 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-06 21:32:55 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-06 21:33:03 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-06 21:33:03 LOG4 exec_msg: From OBSERVER: track_new_source drift17p2 222000.0 +040812 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-06 21:33:03 LOG1 track_new_source: Calling 'track_new_source drift17p2 222000.0 +040812 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-06 21:33:03 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-06 21:33:03 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-06 21:33:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift17p2} INFO {Selecting source 'drift17p2' ...} 2008-Oct-06 21:33:03 LOG3 track_source: Calling 'track_source drift17p2 222000.0 +040812 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-06 21:33:03 START begin_task: Starting task 'sending tracking commands' 2008-Oct-06 21:33:03 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-06 21:33:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift17p2} INFO {Slewing to source 'drift17p2' ...} 2008-Oct-06 21:33:03 INFO1 track_source: Starting to track drift17p2 2008-Oct-06 21:33:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift17p2" 2008-Oct-06 21:33:03 LOG3 vw_send: To DATATAKING: set ra 222000.0 2008-Oct-06 21:33:03 LOG3 vw_send: To DATATAKING: set dec +040812 2008-Oct-06 21:33:03 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-06 21:33:03 LOG3 vw_send: To DATATAKING: pnt tr 222000.0 +040812 -CJ 2008-Oct-06 21:33:03 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-06 21:33:03 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-06 21:33:03 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-06 21:33:03 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-06 21:33:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:33:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-06 21:33:03 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-06 21:33:03 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-06 21:33:03 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-06 21:33:03 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-06 21:33:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-06 21:33:03 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-06 21:33:03 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-06 21:33:03 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-06 21:33:03 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-06 21:33:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:33:03 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-06 21:33:03 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-06 21:33:03 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-06 21:33:03 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-06 21:33:03 DONE finish_task: DONE finished selecting: new source 2008-Oct-06 21:33:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:33:03 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-06 21:33:03 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-06 21:33:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift17p2" 2008-Oct-06 21:33:03 LOG4 got_cormsg: From DATATAKING: set ra 222000.0 2008-Oct-06 21:33:03 LOG4 got_cormsg: From DATATAKING: set dec +040812 2008-Oct-06 21:33:03 LOG4 got_cormsg: From DATATAKING: vw% 222000.0 2008-Oct-06 21:33:03 LOG4 got_cormsg: From DATATAKING: vw% +040812 2008-Oct-06 21:33:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:33:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-06 21:33:03 LOG4 got_cormsg: From DATATAKING: pnt tr 222000.0 +040812 -CJ 2008-Oct-06 21:33:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-06 21:33:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-06 21:33:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:33:03 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-06 21:33:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:21 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-06 21:40:28 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-06 21:40:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-06 21:40:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-06 21:40:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-06 21:40:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-06 21:40:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-06 21:40:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-06 21:40:28 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-06 21:40:28 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-06 21:40:28 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-06 21:40:28 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-06 21:40:28 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-06 21:40:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-06 21:40:28 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-06 21:40:28 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-06 21:40:28 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-06 21:40:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-06 21:40:28 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-06 21:40:28 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-06 21:40:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-06 21:40:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-06 21:40:30 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-06 21:40:30 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-06 21:40:30 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-06 21:40:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-06 21:40:30 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-06 21:40:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 21:40:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-06 21:40:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 21:40:30 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-06 21:40:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 21:40:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 21:40:30 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-06 21:40:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 21:40:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-06 21:40:30 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-06 21:40:30 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-06 21:40:30 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-06 21:40:30 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-06 21:40:30 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-06 21:40:30 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-06 21:40:30 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-06 21:40:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-06 21:40:30 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-06 21:40:30 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-06 21:40:30 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-06 21:40:30 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-06 21:40:30 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-06 21:40:30 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-06 21:40:30 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-06 21:40:30 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-06 21:40:30 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-06 21:40:30 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-06 21:40:30 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-06 21:40:30 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Oct-06 21:40:30 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-06 21:40:30 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-06 21:40:30 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-06 21:40:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:40:31 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-06 21:40:31 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-06 21:40:31 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-06 21:40:31 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-06 21:40:31 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-06 21:40:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-06 21:40:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:40:31 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-06 21:40:31 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-06 21:40:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-06 21:40:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:40:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:40:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-06 21:40:31 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-06 21:40:31 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-06 21:40:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-06 21:40:31 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-06 21:40:31 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-06 21:40:31 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-06 21:40:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:40:31 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-06 21:40:31 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-06 21:40:31 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-06 21:40:31 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-06 21:40:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-06 21:40:31 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-06 21:40:31 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-06 21:40:31 START begin_task: Starting task 'selecting calibration port' 2008-Oct-06 21:40:31 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-06 21:40:31 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-06 21:40:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-06 21:40:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:40:31 START begin_task: Starting task 'waiting on calport' 2008-Oct-06 21:40:31 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-06 21:40:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:31 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-06 21:40:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:40:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-06 21:40:31 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-06 21:40:31 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-06 21:40:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-06 21:40:31 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-06 21:40:31 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-06 21:40:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-06 21:40:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-06 21:40:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 21:40:31 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-06 21:40:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 21:40:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-06 21:40:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 21:40:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 21:40:31 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-06 21:40:31 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-06 21:40:32 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-06 21:40:32 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-06 21:40:32 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-06 21:40:32 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-06 21:40:32 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-06 21:40:32 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-06 21:40:32 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-06 21:40:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-06 21:40:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-06 21:40:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-06 21:40:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-06 21:40:32 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-06 21:40:32 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-06 21:40:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 21:40:32 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-06 21:40:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 21:40:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-06 21:40:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 21:40:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 21:40:32 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-06 21:40:32 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-06 21:40:32 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-06 21:40:32 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-06 21:40:32 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-06 21:40:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:40:32 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-06 21:40:32 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-06 21:40:32 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-06 21:40:32 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-06 21:40:32 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-06 21:40:32 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-06 21:40:32 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-06 21:40:32 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-06 21:40:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-06 21:40:32 LOG3 track_source: Calling 'track_source galfasrc 221900.0 +040812 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-06 21:40:32 START begin_task: Starting task 'sending tracking commands' 2008-Oct-06 21:40:32 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-06 21:40:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-06 21:40:32 INFO1 track_source: Starting to track galfasrc 2008-Oct-06 21:40:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-06 21:40:32 LOG3 vw_send: To DATATAKING: set ra 221900.0 2008-Oct-06 21:40:32 LOG3 vw_send: To DATATAKING: set dec +040812 2008-Oct-06 21:40:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-06 21:40:32 LOG3 vw_send: To DATATAKING: pnt tr 221900.0 +040812 -CJ 2008-Oct-06 21:40:32 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-06 21:40:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-06 21:40:32 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-06 21:40:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-06 21:40:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:40:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-06 21:40:32 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-06 21:40:32 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-06 21:40:32 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-06 21:40:32 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-06 21:40:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:40:33 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-06 21:40:33 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-06 21:40:33 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-06 21:40:33 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-06 21:40:33 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-06 21:40:33 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-06 21:40:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-06 21:40:33 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-06 21:40:33 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-06 21:40:33 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-06 21:40:33 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-06 21:40:33 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-06 21:40:33 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-06 21:40:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-06 21:40:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-06 21:40:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-06 21:40:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-06 21:40:33 LOG4 got_cormsg: From DATATAKING: set ra 221900.0 2008-Oct-06 21:40:33 LOG4 got_cormsg: From DATATAKING: set dec +040812 2008-Oct-06 21:40:33 LOG4 got_cormsg: From DATATAKING: vw% 221900.0 2008-Oct-06 21:40:33 LOG4 got_cormsg: From DATATAKING: vw% +040812 2008-Oct-06 21:40:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-06 21:40:33 LOG4 got_cormsg: From DATATAKING: pnt tr 221900.0 +040812 -CJ 2008-Oct-06 21:40:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-06 21:40:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-06 21:40:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:34 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-06 21:40:34 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-06 21:40:34 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-06 21:40:34 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-06 21:40:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-06 21:40:34 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-06 21:40:34 LOG5 finish_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-06 21:40:34 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-06 21:40:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:40:34 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-06 21:40:34 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-06 21:40:34 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-06 21:40:34 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-06 21:40:34 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-06 21:40:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-06 21:40:34 LOG3 waittrk: Start waittrk 5 2008-Oct-06 21:40:34 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-06 21:40:34 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-06 21:40:39 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-06 21:40:39 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-06 21:40:39 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-06 21:40:39 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-06 21:40:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-06 21:40:50 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-06 21:40:50 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-06 21:40:50 INFO2 waittrk: Now tracking galfasrc 2008-Oct-06 21:40:50 LOG4 waittrk: Current telescope position: Az = 358.28 ZA = 14.15 2008-Oct-06 21:40:50 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-06 21:40:50 LOG5 finish_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-06 21:40:50 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-06 21:40:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:40:50 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-06 21:40:50 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-06 21:40:50 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-06 21:40:50 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-06 21:40:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-06 21:40:51 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-06 21:40:51 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-06 21:40:51 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-06 21:40:51 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-06 21:40:51 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-06 21:40:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-06 21:40:51 START begin_task: Starting task 'selecting calibration type' 2008-Oct-06 21:40:51 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-06 21:40:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-06 21:40:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-06 21:40:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:40:51 START begin_task: Starting task 'waiting on setcal' 2008-Oct-06 21:40:51 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-06 21:40:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-06 21:40:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:40:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-06 21:40:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-06 21:40:51 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-06 21:40:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-06 21:40:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 21:40:51 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-06 21:40:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 21:40:51 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-06 21:40:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 21:40:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 21:40:51 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-06 21:40:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 21:40:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-06 21:40:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 21:40:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-06 21:40:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 21:40:51 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-06 21:40:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 21:40:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 21:40:51 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-06 21:40:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 21:40:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-06 21:40:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-06 21:40:51 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-06 21:40:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-06 21:40:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-06 21:40:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-06 21:40:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-06 21:40:51 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081006.a2010.0016.fits' is empty! 2008-Oct-06 21:40:51 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-06 21:40:51 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-06 21:40:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-06 21:40:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-06 21:40:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-06 21:40:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 21:40:51 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-06 21:40:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 21:40:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-06 21:40:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 21:40:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 21:40:51 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-06 21:40:52 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-06 21:40:52 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-06 21:40:52 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-06 21:40:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-06 21:40:52 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-06 21:40:52 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-06 21:40:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-06 21:40:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:40:52 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-06 21:40:52 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-06 21:40:52 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-06 21:40:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:40:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-06 21:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-06 21:40:55 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-06 21:40:55 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-06 21:40:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-06 21:40:55 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-06 21:40:55 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-06 21:40:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-06 21:40:55 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-06 21:40:55 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-06 21:40:55 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-06 21:40:55 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-06 21:40:55 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-06 21:40:55 LOG5 begin_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-06 21:40:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-06 21:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:55 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-06 21:40:55 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Oct-06 21:40:55 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 4 5 dB 2008-Oct-06 21:40:55 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 2 dB 2008-Oct-06 21:40:55 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-06 21:40:55 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-06 21:40:55 LOG5 end_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-06 21:40:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.120 0.933 ALFA beam 1: 0.971 0.938 2008-Oct-06 21:40:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.013 0.969 ALFA beam 3: 0.885 1.031 2008-Oct-06 21:40:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.084 1.075 ALFA beam 5: 1.117 0.902 2008-Oct-06 21:40:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.980 0.088 ALFA beam 7: 0.872 0.098 2008-Oct-06 21:40:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-06 21:40:56 LOG5 finish_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-06 21:40:56 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-06 21:40:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:40:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-06 21:40:56 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-06 21:40:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-06 21:40:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-06 21:40:56 LOG5 finish_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-06 21:40:56 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-06 21:40:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:40:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-06 21:40:56 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-06 21:40:56 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-06 21:40:56 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-06 21:40:56 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-06 21:40:56 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:40:56 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76907 J 2008-Oct-06 21:40:56 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:40:56 LOG2 antvel: Parameters to Doppler: Topocentric 92455 2008 280 0.0 2008-Oct-06 21:40:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:40:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-06 21:40:56 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-06 21:40:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:40:56 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:40:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-06 21:40:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:40:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:40:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:40:56 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-06 21:40:56 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.303593 2008.7690716340915 18.999933 2008-Oct-06 21:40:56 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666514 4.136666666666672 2008-Oct-06 21:40:56 LOG4 log_alfabeam: ALFABEAM 1 22.315366614056497 4.241010112426952 2008-Oct-06 21:40:56 LOG4 log_alfabeam: ALFABEAM 2 22.310857055641566 4.169880940025566 2008-Oct-06 21:40:56 LOG4 log_alfabeam: ALFABEAM 3 22.312129966085511 4.065448871599505 2008-Oct-06 21:40:56 LOG4 log_alfabeam: ALFABEAM 4 22.317983211074360 4.032348899244192 2008-Oct-06 21:40:56 LOG4 log_alfabeam: ALFABEAM 5 22.322502806613240 4.103967268484451 2008-Oct-06 21:40:56 LOG4 log_alfabeam: ALFABEAM 6 22.321159150255586 4.208193843192038 2008-Oct-06 21:40:56 INFO2 take_data: Starting WAPP+GALFA scan: 828000252 2008-Oct-06 21:40:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:40:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:40:56 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-06 21:40:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:40:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-06 21:40:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:40:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6057.00 2008-Oct-06 21:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:40:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:40:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.151 0.957 1.004 0.958 2008-Oct-06 21:40:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.969 0.885 1.031 2008-Oct-06 21:40:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.138 1.121 1.193 0.935 2008-Oct-06 21:40:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.090 0.897 0.100 2008-Oct-06 21:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.191 (still bad) 2008-Oct-06 21:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.194 (still bad) 2008-Oct-06 21:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.197 (still bad) 2008-Oct-06 21:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.193 (still bad) 2008-Oct-06 21:41:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:41:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:41:07 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-06 21:41:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:41:07 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-06 21:41:07 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-06 21:41:07 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-06 21:41:07 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-06 21:41:07 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:41:07 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76907 J 2008-Oct-06 21:41:07 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:41:07 LOG2 antvel: Parameters to Doppler: Topocentric 92467 2008 280 0.0 2008-Oct-06 21:41:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:41:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-06 21:41:07 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-06 21:41:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:41:07 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:41:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-06 21:41:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:41:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:41:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:41:07 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-06 21:41:07 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.306935 2008.7690720143485 18.999933 2008-Oct-06 21:41:07 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666706 4.136666666666666 2008-Oct-06 21:41:07 LOG4 log_alfabeam: ALFABEAM 1 22.315390270178817 4.241075453928280 2008-Oct-06 21:41:07 LOG4 log_alfabeam: ALFABEAM 2 22.310864615808192 4.170175438317997 2008-Oct-06 21:41:07 LOG4 log_alfabeam: ALFABEAM 3 22.312113852910080 4.065679399390160 2008-Oct-06 21:41:07 LOG4 log_alfabeam: ALFABEAM 4 22.317959567980054 4.032282722728149 2008-Oct-06 21:41:07 LOG4 log_alfabeam: ALFABEAM 5 22.322495363328990 4.103671458348013 2008-Oct-06 21:41:07 LOG4 log_alfabeam: ALFABEAM 6 22.321175332238347 4.207965578568356 2008-Oct-06 21:41:07 INFO2 take_data: Starting WAPP+GALFA scan: 828000253 2008-Oct-06 21:41:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:41:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:41:08 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-06 21:41:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:41:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-06 21:41:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:41:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:41:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:41:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6069.00 2008-Oct-06 21:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.194 (still bad) 2008-Oct-06 21:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.167 (still bad) 2008-Oct-06 21:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.172 (still bad) 2008-Oct-06 21:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.172 (still bad) 2008-Oct-06 21:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.175 (still bad) 2008-Oct-06 21:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.170 (still bad) 2008-Oct-06 21:41:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:41:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:41:19 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-06 21:41:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:41:19 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-06 21:41:19 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-06 21:41:19 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-06 21:41:19 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-06 21:41:19 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:41:19 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76907 J 2008-Oct-06 21:41:19 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:41:19 LOG2 antvel: Parameters to Doppler: Topocentric 92479 2008 280 0.0 2008-Oct-06 21:41:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:41:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-06 21:41:19 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-06 21:41:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:41:19 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:41:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-06 21:41:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:41:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:41:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:41:19 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-06 21:41:19 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.310278 2008.7690723946055 18.999933 2008-Oct-06 21:41:19 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666524 4.136666666666665 2008-Oct-06 21:41:19 LOG4 log_alfabeam: ALFABEAM 1 22.315413950920668 4.241139621967683 2008-Oct-06 21:41:19 LOG4 log_alfabeam: ALFABEAM 2 22.310872245759064 4.170469672895923 2008-Oct-06 21:41:19 LOG4 log_alfabeam: ALFABEAM 3 22.312097785529875 4.065910839547977 2008-Oct-06 21:41:19 LOG4 log_alfabeam: ALFABEAM 4 22.317935899883839 4.032217718298281 2008-Oct-06 21:41:19 LOG4 log_alfabeam: ALFABEAM 5 22.322487849696877 4.103375898844036 2008-Oct-06 21:41:19 LOG4 log_alfabeam: ALFABEAM 6 22.321191469503795 4.207736395207696 2008-Oct-06 21:41:19 INFO2 take_data: Starting WAPP+GALFA scan: 828000254 2008-Oct-06 21:41:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:41:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:41:20 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-06 21:41:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:41:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-06 21:41:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:41:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:41:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:41:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6081.00 2008-Oct-06 21:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.170 (still bad) 2008-Oct-06 21:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.167 (still bad) 2008-Oct-06 21:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.167 (still bad) 2008-Oct-06 21:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.165 (still bad) 2008-Oct-06 21:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.169 (still bad) 2008-Oct-06 21:41:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:41:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:41:31 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-06 21:41:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:41:31 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-06 21:41:31 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-06 21:41:31 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-06 21:41:31 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-06 21:41:31 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:41:31 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76907 J 2008-Oct-06 21:41:31 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:41:31 LOG2 antvel: Parameters to Doppler: Topocentric 92491 2008 280 0.0 2008-Oct-06 21:41:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:41:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-06 21:41:31 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-06 21:41:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:41:31 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:41:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-06 21:41:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:41:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:41:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:41:31 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-06 21:41:31 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.313620 2008.7690727748625 18.999933 2008-Oct-06 21:41:31 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666691 4.136666666666664 2008-Oct-06 21:41:31 LOG4 log_alfabeam: ALFABEAM 1 22.315437641270066 4.241202575461967 2008-Oct-06 21:41:31 LOG4 log_alfabeam: ALFABEAM 2 22.310879940676976 4.170763457063776 2008-Oct-06 21:41:31 LOG4 log_alfabeam: ALFABEAM 3 22.312081774151117 4.066143045538651 2008-Oct-06 21:41:31 LOG4 log_alfabeam: ALFABEAM 4 22.317912221790369 4.032153927599080 2008-Oct-06 21:41:31 LOG4 log_alfabeam: ALFABEAM 5 22.322480270457550 4.103080777553750 2008-Oct-06 21:41:31 LOG4 log_alfabeam: ALFABEAM 6 22.321207551800409 4.207506438126319 2008-Oct-06 21:41:31 INFO2 take_data: Starting WAPP+GALFA scan: 828000255 2008-Oct-06 21:41:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:41:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:41:32 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-06 21:41:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:41:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-06 21:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.163 (still bad) 2008-Oct-06 21:41:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:41:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:41:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:41:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6093.00 2008-Oct-06 21:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.163 (still bad) 2008-Oct-06 21:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.147 (still bad) 2008-Oct-06 21:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.149 (still bad) 2008-Oct-06 21:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.148 (still bad) 2008-Oct-06 21:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.150 (still bad) 2008-Oct-06 21:41:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:41:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:41:43 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-06 21:41:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:41:43 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-06 21:41:43 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-06 21:41:43 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-06 21:41:43 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-06 21:41:43 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:41:43 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76907 J 2008-Oct-06 21:41:43 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:41:43 LOG2 antvel: Parameters to Doppler: Topocentric 92503 2008 280 0.0 2008-Oct-06 21:41:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:41:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-06 21:41:43 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-06 21:41:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:41:43 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:41:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-06 21:41:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:41:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:41:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:41:43 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-06 21:41:43 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.316963 2008.7690731551197 18.999933 2008-Oct-06 21:41:43 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666276 4.136666666666672 2008-Oct-06 21:41:43 LOG4 log_alfabeam: ALFABEAM 1 22.315461354556181 4.241264349520383 2008-Oct-06 21:41:43 LOG4 log_alfabeam: ALFABEAM 2 22.310887704902559 4.171056956002312 2008-Oct-06 21:41:43 LOG4 log_alfabeam: ALFABEAM 3 22.312065809779504 4.066376148156272 2008-Oct-06 21:41:43 LOG4 log_alfabeam: ALFABEAM 4 22.317888520375110 4.032091315081521 2008-Oct-06 21:41:43 LOG4 log_alfabeam: ALFABEAM 5 22.322472621326380 4.102785928591198 2008-Oct-06 21:41:43 LOG4 log_alfabeam: ALFABEAM 6 22.321223588158940 4.207275577709017 2008-Oct-06 21:41:43 INFO2 take_data: Starting WAPP+GALFA scan: 828000256 2008-Oct-06 21:41:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:41:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:41:44 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-06 21:41:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:41:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-06 21:41:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:41:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:41:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.150 (still bad) 2008-Oct-06 21:41:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6105.00 2008-Oct-06 21:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.150 (still bad) 2008-Oct-06 21:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:41:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:41:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:41:55 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-06 21:41:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:41:55 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-06 21:41:55 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-06 21:41:55 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-06 21:41:55 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-06 21:41:55 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:41:55 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76907 J 2008-Oct-06 21:41:55 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:41:55 LOG2 antvel: Parameters to Doppler: Topocentric 92515 2008 280 0.0 2008-Oct-06 21:41:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:41:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-06 21:41:55 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-06 21:41:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:41:55 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:41:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-06 21:41:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:41:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:41:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:41:55 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-06 21:41:55 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.320305 2008.7690735353767 18.999933 2008-Oct-06 21:41:55 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666492 4.136666666666665 2008-Oct-06 21:41:55 LOG4 log_alfabeam: ALFABEAM 1 22.315485075744437 4.241324904751977 2008-Oct-06 21:41:55 LOG4 log_alfabeam: ALFABEAM 2 22.310895533529091 4.171349983531396 2008-Oct-06 21:41:55 LOG4 log_alfabeam: ALFABEAM 3 22.312049902548427 4.066609999686613 2008-Oct-06 21:41:55 LOG4 log_alfabeam: ALFABEAM 4 22.317864810666556 4.032029920699475 2008-Oct-06 21:41:55 LOG4 log_alfabeam: ALFABEAM 5 22.322464907140347 4.102491539040957 2008-Oct-06 21:41:55 LOG4 log_alfabeam: ALFABEAM 6 22.321239568398880 4.207043960162739 2008-Oct-06 21:41:55 INFO2 take_data: Starting WAPP+GALFA scan: 828000257 2008-Oct-06 21:41:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:41:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:41:56 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-06 21:41:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:41:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-06 21:41:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:41:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6117.00 2008-Oct-06 21:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:41:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:41:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 0.930 0.966 0.937 2008-Oct-06 21:41:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.991 0.896 1.052 2008-Oct-06 21:41:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 1.102 1.110 0.897 2008-Oct-06 21:41:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.090 0.884 0.100 2008-Oct-06 21:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.109 (still bad) 2008-Oct-06 21:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.109 (still bad) 2008-Oct-06 21:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.111 (still bad) 2008-Oct-06 21:42:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:42:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:42:07 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-06 21:42:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:42:07 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-06 21:42:07 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-06 21:42:07 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-06 21:42:07 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-06 21:42:07 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:42:07 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76907 J 2008-Oct-06 21:42:07 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:42:07 LOG2 antvel: Parameters to Doppler: Topocentric 92527 2008 280 0.0 2008-Oct-06 21:42:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:42:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-06 21:42:07 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-06 21:42:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:42:07 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:42:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-06 21:42:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:42:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:42:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:42:07 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-06 21:42:07 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.323648 2008.7690739156337 18.999933 2008-Oct-06 21:42:07 LOG4 log_alfabeam: ALFABEAM 0 22.316666666667441 4.136666666666660 2008-Oct-06 21:42:07 LOG4 log_alfabeam: ALFABEAM 1 22.315508818182511 4.241384275091773 2008-Oct-06 21:42:07 LOG4 log_alfabeam: ALFABEAM 2 22.310903430962778 4.171642704457788 2008-Oct-06 21:42:07 LOG4 log_alfabeam: ALFABEAM 3 22.312034043516476 4.066844731725724 2008-Oct-06 21:42:07 LOG4 log_alfabeam: ALFABEAM 4 22.317841079329018 4.031969710077231 2008-Oct-06 21:42:07 LOG4 log_alfabeam: ALFABEAM 5 22.322457123552450 4.102197443379707 2008-Oct-06 21:42:07 LOG4 log_alfabeam: ALFABEAM 6 22.321255501504289 4.206811455063438 2008-Oct-06 21:42:07 INFO2 take_data: Starting WAPP+GALFA scan: 828000258 2008-Oct-06 21:42:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:42:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:42:08 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-06 21:42:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:42:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-06 21:42:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:42:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:42:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:42:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6129.00 2008-Oct-06 21:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.111 (still bad) 2008-Oct-06 21:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.109 (still bad) 2008-Oct-06 21:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.109 (still bad) 2008-Oct-06 21:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.108 (still bad) 2008-Oct-06 21:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.112 (still bad) 2008-Oct-06 21:42:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:42:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:42:19 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-06 21:42:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:42:19 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-06 21:42:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-06 21:42:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-06 21:42:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-06 21:42:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 21:42:19 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-06 21:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.109 (still bad) 2008-Oct-06 21:42:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 21:42:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-06 21:42:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 21:42:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 21:42:19 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-06 21:42:19 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-06 21:42:19 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-06 21:42:19 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-06 21:42:19 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:42:19 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76907 J 2008-Oct-06 21:42:19 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:42:19 LOG2 antvel: Parameters to Doppler: Topocentric 92539 2008 280 0.0 2008-Oct-06 21:42:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:42:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-06 21:42:19 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-06 21:42:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:42:19 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:42:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-06 21:42:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:42:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:42:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:42:19 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-06 21:42:19 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.326990 2008.7690742958907 18.999933 2008-Oct-06 21:42:19 LOG4 log_alfabeam: ALFABEAM 0 22.316666666667142 4.136666666666660 2008-Oct-06 21:42:19 LOG4 log_alfabeam: ALFABEAM 1 22.315532566801384 4.241442422849060 2008-Oct-06 21:42:19 LOG4 log_alfabeam: ALFABEAM 2 22.310911392189706 4.171934933150693 2008-Oct-06 21:42:19 LOG4 log_alfabeam: ALFABEAM 3 22.312018242734815 4.067080195405797 2008-Oct-06 21:42:19 LOG4 log_alfabeam: ALFABEAM 4 22.317817341402495 4.031910721469934 2008-Oct-06 21:42:19 LOG4 log_alfabeam: ALFABEAM 5 22.322449275484573 4.101903828161125 2008-Oct-06 21:42:19 LOG4 log_alfabeam: ALFABEAM 6 22.321271377357746 4.206578209782966 2008-Oct-06 21:42:19 INFO2 take_data: Starting WAPP+GALFA scan: 828000259 2008-Oct-06 21:42:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:42:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:42:20 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-06 21:42:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:42:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-06 21:42:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:42:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:42:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:42:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6141.00 2008-Oct-06 21:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.107 (still bad) 2008-Oct-06 21:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.649 (still bad) 2008-Oct-06 21:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.646 (still bad) 2008-Oct-06 21:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.647 (still bad) 2008-Oct-06 21:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.648 (still bad) 2008-Oct-06 21:42:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:42:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:42:31 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-06 21:42:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:42:31 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-06 21:42:31 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-06 21:42:31 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-06 21:42:31 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-06 21:42:31 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:42:31 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76907 J 2008-Oct-06 21:42:31 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:42:31 LOG2 antvel: Parameters to Doppler: Topocentric 92551 2008 280 0.0 2008-Oct-06 21:42:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:42:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-06 21:42:31 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-06 21:42:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:42:31 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:42:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-06 21:42:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:42:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:42:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:42:31 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-06 21:42:31 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.330332 2008.769074676148 18.999933 2008-Oct-06 21:42:31 LOG4 log_alfabeam: ALFABEAM 0 22.316666666667206 4.136666666666662 2008-Oct-06 21:42:31 LOG4 log_alfabeam: ALFABEAM 1 22.315556327860403 4.241499363923515 2008-Oct-06 21:42:31 LOG4 log_alfabeam: ALFABEAM 2 22.310919419281554 4.172226746771067 2008-Oct-06 21:42:31 LOG4 log_alfabeam: ALFABEAM 3 22.312002496025208 4.067316452299408 2008-Oct-06 21:42:31 LOG4 log_alfabeam: ALFABEAM 4 22.317793590653881 4.031852938788260 2008-Oct-06 21:42:31 LOG4 log_alfabeam: ALFABEAM 5 22.322441360908716 4.101610615916854 2008-Oct-06 21:42:31 LOG4 log_alfabeam: ALFABEAM 6 22.321287200173465 4.206344163253432 2008-Oct-06 21:42:31 INFO2 take_data: Starting WAPP+GALFA scan: 828000260 2008-Oct-06 21:42:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:42:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:42:32 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-06 21:42:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:42:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-06 21:42:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:42:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:42:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:42:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6153.00 2008-Oct-06 21:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.648 (still bad) 2008-Oct-06 21:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.618 (still bad) 2008-Oct-06 21:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.615 (still bad) 2008-Oct-06 21:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.620 (still bad) 2008-Oct-06 21:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.625 (still bad) 2008-Oct-06 21:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.620 (still bad) 2008-Oct-06 21:42:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:42:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:42:43 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-06 21:42:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:42:43 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-06 21:42:43 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-06 21:42:43 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-06 21:42:43 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-06 21:42:43 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:42:43 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:42:43 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:42:43 LOG2 antvel: Parameters to Doppler: Topocentric 92563 2008 280 0.0 2008-Oct-06 21:42:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:42:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-06 21:42:43 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-06 21:42:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:42:43 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:42:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-06 21:42:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:42:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:42:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:42:43 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-06 21:42:43 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.333675 2008.769075056405 18.999933 2008-Oct-06 21:42:43 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666880 4.136666666666661 2008-Oct-06 21:42:43 LOG4 log_alfabeam: ALFABEAM 1 22.315580107614664 4.241555112902812 2008-Oct-06 21:42:43 LOG4 log_alfabeam: ALFABEAM 2 22.310927514368331 4.172518222030429 2008-Oct-06 21:42:43 LOG4 log_alfabeam: ALFABEAM 3 22.311986799255315 4.067553564843634 2008-Oct-06 21:42:43 LOG4 log_alfabeam: ALFABEAM 4 22.317769820818931 4.031796347254305 2008-Oct-06 21:42:43 LOG4 log_alfabeam: ALFABEAM 5 22.322433377716710 4.101317729615265 2008-Oct-06 21:42:43 LOG4 log_alfabeam: ALFABEAM 6 22.321302974091889 4.206109253534051 2008-Oct-06 21:42:43 INFO2 take_data: Starting WAPP+GALFA scan: 828000261 2008-Oct-06 21:42:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:42:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:42:44 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-06 21:42:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:42:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-06 21:42:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:42:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:42:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:42:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6165.00 2008-Oct-06 21:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.620 (still bad) 2008-Oct-06 21:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.617 (still bad) 2008-Oct-06 21:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.615 (still bad) 2008-Oct-06 21:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.613 (still bad) 2008-Oct-06 21:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.613 (still bad) 2008-Oct-06 21:42:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:42:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:42:55 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Oct-06 21:42:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:42:55 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-06 21:42:55 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-06 21:42:55 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-06 21:42:55 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-06 21:42:55 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:42:55 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:42:55 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:42:55 LOG2 antvel: Parameters to Doppler: Topocentric 92575 2008 280 0.0 2008-Oct-06 21:42:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:42:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-06 21:42:55 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-06 21:42:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:42:55 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:42:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-06 21:42:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:42:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:42:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:42:55 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-06 21:42:55 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.337017 2008.769075436662 18.999933 2008-Oct-06 21:42:55 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666826 4.136666666666661 2008-Oct-06 21:42:55 LOG4 log_alfabeam: ALFABEAM 1 22.315603890981794 4.241609634658219 2008-Oct-06 21:42:55 LOG4 log_alfabeam: ALFABEAM 2 22.310935672303692 4.172809174180854 2008-Oct-06 21:42:55 LOG4 log_alfabeam: ALFABEAM 3 22.311971162369250 4.067791382487913 2008-Oct-06 21:42:55 LOG4 log_alfabeam: ALFABEAM 4 22.317746046976431 4.031740982562755 2008-Oct-06 21:42:55 LOG4 log_alfabeam: ALFABEAM 5 22.322425330975587 4.101025354954009 2008-Oct-06 21:42:55 LOG4 log_alfabeam: ALFABEAM 6 22.321318689118815 4.205873629697317 2008-Oct-06 21:42:55 INFO2 take_data: Starting WAPP+GALFA scan: 828000262 2008-Oct-06 21:42:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:42:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:42:56 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-06 21:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.610 (still bad) 2008-Oct-06 21:42:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:42:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-06 21:42:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:42:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:42:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:42:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6177.00 2008-Oct-06 21:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.589 (still bad) 2008-Oct-06 21:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.091 < 0.75)! 2008-Oct-06 21:43:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.553 1.260 1.313 1.262 2008-Oct-06 21:43:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.395 1.357 1.261 1.448 2008-Oct-06 21:43:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.544 1.540 1.584 1.210 2008-Oct-06 21:43:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.401 0.091 1.238 0.101 2008-Oct-06 21:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.585 (still bad) 2008-Oct-06 21:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.589 (still bad) 2008-Oct-06 21:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.584 (still bad) 2008-Oct-06 21:43:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:43:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:43:07 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Oct-06 21:43:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:43:07 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Oct-06 21:43:07 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-06 21:43:07 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-06 21:43:07 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-06 21:43:07 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:43:07 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:43:07 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:43:07 LOG2 antvel: Parameters to Doppler: Topocentric 92587 2008 280 0.0 2008-Oct-06 21:43:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:43:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-06 21:43:07 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-06 21:43:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:43:07 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:43:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-06 21:43:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:43:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:43:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:43:07 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-06 21:43:07 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.340360 2008.769075816919 18.999933 2008-Oct-06 21:43:07 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666794 4.136666666666664 2008-Oct-06 21:43:07 LOG4 log_alfabeam: ALFABEAM 1 22.315627691337266 4.241662960173815 2008-Oct-06 21:43:07 LOG4 log_alfabeam: ALFABEAM 2 22.310943897657964 4.173099767018323 2008-Oct-06 21:43:07 LOG4 log_alfabeam: ALFABEAM 3 22.311955576555864 4.068030038772134 2008-Oct-06 21:43:07 LOG4 log_alfabeam: ALFABEAM 4 22.317722255755587 4.031686813287152 2008-Oct-06 21:43:07 LOG4 log_alfabeam: ALFABEAM 5 22.322417216175150 4.100733327393048 2008-Oct-06 21:43:07 LOG4 log_alfabeam: ALFABEAM 6 22.321334354105677 4.205637159357163 2008-Oct-06 21:43:07 INFO2 take_data: Starting WAPP+GALFA scan: 828000263 2008-Oct-06 21:43:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:43:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:43:08 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-06 21:43:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:43:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-06 21:43:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:43:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:43:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.586 (still bad) 2008-Oct-06 21:43:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6189.00 2008-Oct-06 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.543 (still bad) 2008-Oct-06 21:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.543 (still bad) 2008-Oct-06 21:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.546 (still bad) 2008-Oct-06 21:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.548 (still bad) 2008-Oct-06 21:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.545 (still bad) 2008-Oct-06 21:43:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:43:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:43:19 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Oct-06 21:43:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:43:19 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Oct-06 21:43:19 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-06 21:43:19 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-06 21:43:19 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-06 21:43:19 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:43:19 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:43:19 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:43:19 LOG2 antvel: Parameters to Doppler: Topocentric 92599 2008 280 0.0 2008-Oct-06 21:43:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:43:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-06 21:43:19 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-06 21:43:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:43:19 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:43:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-06 21:43:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:43:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:43:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:43:19 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-06 21:43:19 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.343702 2008.769076197176 18.999933 2008-Oct-06 21:43:19 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666777 4.136666666666661 2008-Oct-06 21:43:19 LOG4 log_alfabeam: ALFABEAM 1 22.315651493583651 4.241715056036047 2008-Oct-06 21:43:19 LOG4 log_alfabeam: ALFABEAM 2 22.310952185192129 4.173389816424463 2008-Oct-06 21:43:19 LOG4 log_alfabeam: ALFABEAM 3 22.311940051680477 4.068269382058200 2008-Oct-06 21:43:19 LOG4 log_alfabeam: ALFABEAM 4 22.317698462247410 4.031633873407824 2008-Oct-06 21:43:19 LOG4 log_alfabeam: ALFABEAM 5 22.322409038480817 4.100441832017929 2008-Oct-06 21:43:19 LOG4 log_alfabeam: ALFABEAM 6 22.321349959134277 4.205399992686194 2008-Oct-06 21:43:19 INFO2 take_data: Starting WAPP+GALFA scan: 828000264 2008-Oct-06 21:43:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:43:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:43:20 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-06 21:43:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:43:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-06 21:43:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:43:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6201.00 2008-Oct-06 21:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.543 (still bad) 2008-Oct-06 21:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.537 (still bad) 2008-Oct-06 21:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.536 (still bad) 2008-Oct-06 21:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.531 (still bad) 2008-Oct-06 21:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.536 (still bad) 2008-Oct-06 21:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.536 (still bad) 2008-Oct-06 21:43:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:43:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:43:31 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Oct-06 21:43:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:43:31 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Oct-06 21:43:31 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-06 21:43:31 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-06 21:43:31 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-06 21:43:31 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:43:31 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:43:31 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:43:31 LOG2 antvel: Parameters to Doppler: Topocentric 92611 2008 280 0.0 2008-Oct-06 21:43:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:43:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-06 21:43:31 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-06 21:43:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:43:31 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:43:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-06 21:43:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:43:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:43:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:43:31 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-06 21:43:31 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.347045 2008.7690765774332 18.999933 2008-Oct-06 21:43:31 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666837 4.136666666666665 2008-Oct-06 21:43:31 LOG4 log_alfabeam: ALFABEAM 1 22.315675311106471 4.241765952043090 2008-Oct-06 21:43:31 LOG4 log_alfabeam: ALFABEAM 2 22.310960539540215 4.173679485760283 2008-Oct-06 21:43:31 LOG4 log_alfabeam: ALFABEAM 3 22.311924578986293 4.068509546638181 2008-Oct-06 21:43:31 LOG4 log_alfabeam: ALFABEAM 4 22.317674653071563 4.031582132683693 2008-Oct-06 21:43:31 LOG4 log_alfabeam: ALFABEAM 5 22.322400793316142 4.100150704712845 2008-Oct-06 21:43:31 LOG4 log_alfabeam: ALFABEAM 6 22.321365513002711 4.205161996538479 2008-Oct-06 21:43:31 INFO2 take_data: Starting WAPP+GALFA scan: 828000265 2008-Oct-06 21:43:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:43:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:43:32 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-06 21:43:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:43:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-06 21:43:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:43:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:43:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:43:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6213.00 2008-Oct-06 21:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.533 (still bad) 2008-Oct-06 21:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.521 (still bad) 2008-Oct-06 21:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.520 (still bad) 2008-Oct-06 21:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.520 (still bad) 2008-Oct-06 21:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.524 (still bad) 2008-Oct-06 21:43:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:43:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:43:43 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Oct-06 21:43:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:43:43 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Oct-06 21:43:43 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Oct-06 21:43:43 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-06 21:43:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-06 21:43:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-06 21:43:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-06 21:43:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 21:43:43 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-06 21:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.524 (still bad) 2008-Oct-06 21:43:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 21:43:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-06 21:43:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 21:43:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 21:43:43 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Oct-06 21:43:43 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-06 21:43:43 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-06 21:43:43 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-06 21:43:43 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-06 21:43:43 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:43:43 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:43:43 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:43:43 LOG2 antvel: Parameters to Doppler: Topocentric 92623 2008 280 0.0 2008-Oct-06 21:43:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:43:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-06 21:43:43 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-06 21:43:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:43:43 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:43:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-06 21:43:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:43:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:43:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:43:43 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-06 21:43:43 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.350387 2008.7690769576902 18.999933 2008-Oct-06 21:43:43 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666720 4.136666666666668 2008-Oct-06 21:43:43 LOG4 log_alfabeam: ALFABEAM 1 22.315699128796950 4.241815616500984 2008-Oct-06 21:43:43 LOG4 log_alfabeam: ALFABEAM 2 22.310968955371838 4.173968591568753 2008-Oct-06 21:43:43 LOG4 log_alfabeam: ALFABEAM 3 22.311909168257603 4.068750379814179 2008-Oct-06 21:43:43 LOG4 log_alfabeam: ALFABEAM 4 22.317650843330824 4.031531623376202 2008-Oct-06 21:43:43 LOG4 log_alfabeam: ALFABEAM 5 22.322392485938277 4.099860129919108 2008-Oct-06 21:43:43 LOG4 log_alfabeam: ALFABEAM 6 22.321381005871594 4.204923322159603 2008-Oct-06 21:43:43 INFO2 take_data: Starting WAPP+GALFA scan: 828000266 2008-Oct-06 21:43:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:43:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:43:44 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-06 21:43:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:43:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-06 21:43:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:43:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:43:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:43:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6225.00 2008-Oct-06 21:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.522 (still bad) 2008-Oct-06 21:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.194 (still bad) 2008-Oct-06 21:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.195 (still bad) 2008-Oct-06 21:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.192 (still bad) 2008-Oct-06 21:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.193 (still bad) 2008-Oct-06 21:43:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:43:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:43:55 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Oct-06 21:43:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:43:55 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Oct-06 21:43:55 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-06 21:43:55 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-06 21:43:55 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-06 21:43:55 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:43:55 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:43:55 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:43:55 LOG2 antvel: Parameters to Doppler: Topocentric 92635 2008 280 0.0 2008-Oct-06 21:43:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:43:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-06 21:43:55 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-06 21:43:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:43:55 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:43:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-06 21:43:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:43:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:43:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:43:55 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-06 21:43:55 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.353730 2008.7690773379472 18.999933 2008-Oct-06 21:43:55 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666720 4.136666666666670 2008-Oct-06 21:43:55 LOG4 log_alfabeam: ALFABEAM 1 22.315722960048745 4.241864078019287 2008-Oct-06 21:43:55 LOG4 log_alfabeam: ALFABEAM 2 22.310977437384757 4.174257296758665 2008-Oct-06 21:43:55 LOG4 log_alfabeam: ALFABEAM 3 22.311893810793588 4.068992016615683 2008-Oct-06 21:43:55 LOG4 log_alfabeam: ALFABEAM 4 22.317627019636749 4.031482316432379 2008-Oct-06 21:43:55 LOG4 log_alfabeam: ALFABEAM 5 22.322384111707219 4.099569943962531 2008-Oct-06 21:43:55 LOG4 log_alfabeam: ALFABEAM 6 22.321396446484769 4.204683835658278 2008-Oct-06 21:43:55 INFO2 take_data: Starting WAPP+GALFA scan: 828000267 2008-Oct-06 21:43:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:43:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:43:56 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-06 21:43:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:43:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-06 21:43:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:43:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:43:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:43:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6237.00 2008-Oct-06 21:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.194 (still bad) 2008-Oct-06 21:43:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:43:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.175 (still bad) 2008-Oct-06 21:44:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:44:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.146 0.951 0.998 0.953 2008-Oct-06 21:44:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 1.004 0.931 1.071 2008-Oct-06 21:44:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 1.110 1.172 0.921 2008-Oct-06 21:44:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.018 0.090 0.897 0.101 2008-Oct-06 21:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.172 (still bad) 2008-Oct-06 21:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.175 (still bad) 2008-Oct-06 21:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.171 (still bad) 2008-Oct-06 21:44:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:44:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:44:07 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Oct-06 21:44:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:44:07 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Oct-06 21:44:07 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-06 21:44:07 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-06 21:44:07 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-06 21:44:07 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:44:07 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:44:07 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:44:07 LOG2 antvel: Parameters to Doppler: Topocentric 92647 2008 280 0.0 2008-Oct-06 21:44:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:44:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-06 21:44:07 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-06 21:44:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:44:07 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:44:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-06 21:44:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:44:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:44:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:44:07 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-06 21:44:07 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.357072 2008.7690777182042 18.999933 2008-Oct-06 21:44:07 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666741 4.136666666666664 2008-Oct-06 21:44:07 LOG4 log_alfabeam: ALFABEAM 1 22.315746789744406 4.241911306627054 2008-Oct-06 21:44:07 LOG4 log_alfabeam: ALFABEAM 2 22.310985980158570 4.174545418565742 2008-Oct-06 21:44:07 LOG4 log_alfabeam: ALFABEAM 3 22.311878516296353 4.069234303313270 2008-Oct-06 21:44:07 LOG4 log_alfabeam: ALFABEAM 4 22.317603197101356 4.031434242391047 2008-Oct-06 21:44:07 LOG4 log_alfabeam: ALFABEAM 5 22.322375675971344 4.099280330608417 2008-Oct-06 21:44:07 LOG4 log_alfabeam: ALFABEAM 6 22.321411825083473 4.204443689325259 2008-Oct-06 21:44:07 INFO2 take_data: Starting WAPP+GALFA scan: 828000268 2008-Oct-06 21:44:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:44:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:44:08 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-06 21:44:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:44:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-06 21:44:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:44:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:44:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:44:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6249.00 2008-Oct-06 21:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.168 (still bad) 2008-Oct-06 21:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.168 (still bad) 2008-Oct-06 21:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.165 (still bad) 2008-Oct-06 21:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.165 (still bad) 2008-Oct-06 21:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.171 (still bad) 2008-Oct-06 21:44:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:44:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:44:19 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Oct-06 21:44:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:44:19 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Oct-06 21:44:19 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-06 21:44:19 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-06 21:44:19 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-06 21:44:19 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:44:19 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:44:19 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:44:19 LOG2 antvel: Parameters to Doppler: Topocentric 92659 2008 280 0.0 2008-Oct-06 21:44:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:44:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-06 21:44:19 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-06 21:44:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:44:19 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:44:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-06 21:44:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:44:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:44:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:44:19 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-06 21:44:19 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.360415 2008.7690780984613 18.999933 2008-Oct-06 21:44:19 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666720 4.136666666666664 2008-Oct-06 21:44:19 LOG4 log_alfabeam: ALFABEAM 1 22.315770631284476 4.241957329742937 2008-Oct-06 21:44:19 LOG4 log_alfabeam: ALFABEAM 2 22.310994588453319 4.174833119429403 2008-Oct-06 21:44:19 LOG4 log_alfabeam: ALFABEAM 3 22.311863276121077 4.069477375658959 2008-Oct-06 21:44:19 LOG4 log_alfabeam: ALFABEAM 4 22.317579362328381 4.031387373389818 2008-Oct-06 21:44:19 LOG4 log_alfabeam: ALFABEAM 5 22.322367174027168 4.098991126641495 2008-Oct-06 21:44:19 LOG4 log_alfabeam: ALFABEAM 6 22.321427150356087 4.204202748538640 2008-Oct-06 21:44:19 INFO2 take_data: Starting WAPP+GALFA scan: 828000269 2008-Oct-06 21:44:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:44:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:44:20 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-06 21:44:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:44:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-06 21:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.166 (still bad) 2008-Oct-06 21:44:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:44:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:44:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:44:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6261.00 2008-Oct-06 21:44:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:44:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.152 (still bad) 2008-Oct-06 21:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.148 (still bad) 2008-Oct-06 21:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.150 (still bad) 2008-Oct-06 21:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.153 (still bad) 2008-Oct-06 21:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.151 (still bad) 2008-Oct-06 21:44:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:44:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:44:31 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Oct-06 21:44:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:44:31 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Oct-06 21:44:31 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-06 21:44:31 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-06 21:44:31 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-06 21:44:31 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:44:31 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:44:31 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:44:31 LOG2 antvel: Parameters to Doppler: Topocentric 92671 2008 280 0.0 2008-Oct-06 21:44:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:44:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-06 21:44:31 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-06 21:44:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:44:31 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:44:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-06 21:44:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:44:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:44:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:44:31 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-06 21:44:31 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.363757 2008.7690784787185 18.999933 2008-Oct-06 21:44:31 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666698 4.136666666666661 2008-Oct-06 21:44:31 LOG4 log_alfabeam: ALFABEAM 1 22.315794469545278 4.242002119121530 2008-Oct-06 21:44:31 LOG4 log_alfabeam: ALFABEAM 2 22.311003256759921 4.175120217309173 2008-Oct-06 21:44:31 LOG4 log_alfabeam: ALFABEAM 3 22.311848099886511 4.069721078920637 2008-Oct-06 21:44:31 LOG4 log_alfabeam: ALFABEAM 4 22.317555530437165 4.031341738242222 2008-Oct-06 21:44:31 LOG4 log_alfabeam: ALFABEAM 5 22.322358611312790 4.098702515119646 2008-Oct-06 21:44:31 LOG4 log_alfabeam: ALFABEAM 6 22.321442412626180 4.203961166606004 2008-Oct-06 21:44:31 INFO2 take_data: Starting WAPP+GALFA scan: 828000270 2008-Oct-06 21:44:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:44:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:44:32 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-06 21:44:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:44:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-06 21:44:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:44:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:44:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.149 (still bad) 2008-Oct-06 21:44:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6273.00 2008-Oct-06 21:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:44:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:44:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:44:43 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Oct-06 21:44:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:44:43 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Oct-06 21:44:43 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-06 21:44:43 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-06 21:44:43 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-06 21:44:43 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:44:43 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:44:43 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:44:43 LOG2 antvel: Parameters to Doppler: Topocentric 92683 2008 280 0.0 2008-Oct-06 21:44:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:44:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-06 21:44:43 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-06 21:44:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:44:43 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:44:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-06 21:44:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:44:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:44:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:44:43 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-06 21:44:43 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.367100 2008.7690788589755 18.999933 2008-Oct-06 21:44:43 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666709 4.136666666666664 2008-Oct-06 21:44:43 LOG4 log_alfabeam: ALFABEAM 1 22.315818317932862 4.242045700988523 2008-Oct-06 21:44:43 LOG4 log_alfabeam: ALFABEAM 2 22.311011989900319 4.175406874158063 2008-Oct-06 21:44:43 LOG4 log_alfabeam: ALFABEAM 3 22.311832979004830 4.069965549557668 2008-Oct-06 21:44:43 LOG4 log_alfabeam: ALFABEAM 4 22.317531688025372 4.031297310278545 2008-Oct-06 21:44:43 LOG4 log_alfabeam: ALFABEAM 5 22.322349983062438 4.098414333303745 2008-Oct-06 21:44:43 LOG4 log_alfabeam: ALFABEAM 6 22.321457620525813 4.203718808189734 2008-Oct-06 21:44:43 INFO2 take_data: Starting WAPP+GALFA scan: 828000271 2008-Oct-06 21:44:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:44:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:44:44 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-06 21:44:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:44:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-06 21:44:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:44:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:44:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:44:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6285.00 2008-Oct-06 21:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.111 (still bad) 2008-Oct-06 21:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.109 (still bad) 2008-Oct-06 21:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.110 (still bad) 2008-Oct-06 21:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.110 (still bad) 2008-Oct-06 21:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.109 (still bad) 2008-Oct-06 21:44:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:44:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:44:55 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Oct-06 21:44:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:44:55 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Oct-06 21:44:55 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-06 21:44:55 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-06 21:44:55 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-06 21:44:55 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:44:55 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:44:55 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:44:55 LOG2 antvel: Parameters to Doppler: Topocentric 92695 2008 280 0.0 2008-Oct-06 21:44:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:44:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-06 21:44:55 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-06 21:44:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:44:55 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:44:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-06 21:44:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:44:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-06 21:44:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:44:55 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-06 21:44:55 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.370442 2008.7690792392325 18.999933 2008-Oct-06 21:44:55 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666730 4.136666666666668 2008-Oct-06 21:44:55 LOG4 log_alfabeam: ALFABEAM 1 22.315842161320138 4.242088048825599 2008-Oct-06 21:44:55 LOG4 log_alfabeam: ALFABEAM 2 22.311020782277918 4.175692908689891 2008-Oct-06 21:44:55 LOG4 log_alfabeam: ALFABEAM 3 22.311817923009496 4.070210631864610 2008-Oct-06 21:44:55 LOG4 log_alfabeam: ALFABEAM 4 22.317507850216369 4.031254116585271 2008-Oct-06 21:44:55 LOG4 log_alfabeam: ALFABEAM 5 22.322341294802865 4.098126763513281 2008-Oct-06 21:44:55 LOG4 log_alfabeam: ALFABEAM 6 22.321472764462197 4.203475827585418 2008-Oct-06 21:44:55 INFO2 take_data: Starting WAPP+GALFA scan: 828000272 2008-Oct-06 21:44:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:44:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:44:56 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-06 21:44:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:44:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-06 21:44:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:44:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:44:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:44:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6297.00 2008-Oct-06 21:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.107 (still bad) 2008-Oct-06 21:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.107 (still bad) 2008-Oct-06 21:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.105 (still bad) 2008-Oct-06 21:45:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:45:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.927 0.963 0.933 2008-Oct-06 21:45:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 0.982 0.888 1.046 2008-Oct-06 21:45:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 1.092 1.095 0.891 2008-Oct-06 21:45:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.090 0.881 0.100 2008-Oct-06 21:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.107 (still bad) 2008-Oct-06 21:45:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.107 (still bad) 2008-Oct-06 21:45:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:45:07 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Oct-06 21:45:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:45:07 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Oct-06 21:45:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-06 21:45:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-06 21:45:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-06 21:45:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 21:45:07 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-06 21:45:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 21:45:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-06 21:45:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 21:45:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 21:45:07 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Oct-06 21:45:07 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-06 21:45:07 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-06 21:45:07 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-06 21:45:07 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:45:07 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:45:07 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:45:07 LOG2 antvel: Parameters to Doppler: Topocentric 92707 2008 280 0.0 2008-Oct-06 21:45:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:45:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-06 21:45:07 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-06 21:45:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:45:07 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:45:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-06 21:45:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:45:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:45:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:45:07 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-06 21:45:07 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.373784 2008.7690796194895 18.999933 2008-Oct-06 21:45:07 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666713 4.136666666666667 2008-Oct-06 21:45:07 LOG4 log_alfabeam: ALFABEAM 1 22.315866005982159 4.242129175540494 2008-Oct-06 21:45:07 LOG4 log_alfabeam: ALFABEAM 2 22.311029636117652 4.175978397012707 2008-Oct-06 21:45:07 LOG4 log_alfabeam: ALFABEAM 3 22.311802927848547 4.070456389356707 2008-Oct-06 21:45:07 LOG4 log_alfabeam: ALFABEAM 4 22.317484010737061 4.031212144063446 2008-Oct-06 21:45:07 LOG4 log_alfabeam: ALFABEAM 5 22.322332544333651 4.097839729308092 2008-Oct-06 21:45:07 LOG4 log_alfabeam: ALFABEAM 6 22.321487848506045 4.203232161766592 2008-Oct-06 21:45:07 INFO2 take_data: Starting WAPP+GALFA scan: 828000273 2008-Oct-06 21:45:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:45:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:45:08 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-06 21:45:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:45:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-06 21:45:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:45:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:45:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:45:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6309.00 2008-Oct-06 21:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.104 (still bad) 2008-Oct-06 21:45:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:45:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.650 (still bad) 2008-Oct-06 21:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.646 (still bad) 2008-Oct-06 21:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.648 (still bad) 2008-Oct-06 21:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.651 (still bad) 2008-Oct-06 21:45:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:45:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:45:19 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Oct-06 21:45:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:45:19 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Oct-06 21:45:19 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-06 21:45:19 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-06 21:45:19 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-06 21:45:19 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:45:19 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:45:19 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:45:19 LOG2 antvel: Parameters to Doppler: Topocentric 92719 2008 280 0.0 2008-Oct-06 21:45:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:45:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-06 21:45:19 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-06 21:45:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:45:19 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:45:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-06 21:45:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:45:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:45:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:45:19 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-06 21:45:19 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.377127 2008.7690799997465 18.999933 2008-Oct-06 21:45:19 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666659 4.136666666666665 2008-Oct-06 21:45:19 LOG4 log_alfabeam: ALFABEAM 1 22.315889858196030 4.242169092712353 2008-Oct-06 21:45:19 LOG4 log_alfabeam: ALFABEAM 2 22.311038553711558 4.176263414649765 2008-Oct-06 21:45:19 LOG4 log_alfabeam: ALFABEAM 3 22.311787989535606 4.070702886293478 2008-Oct-06 21:45:19 LOG4 log_alfabeam: ALFABEAM 4 22.317460163311605 4.031171380942804 2008-Oct-06 21:45:19 LOG4 log_alfabeam: ALFABEAM 5 22.322323729386515 4.097553154821423 2008-Oct-06 21:45:19 LOG4 log_alfabeam: ALFABEAM 6 22.321502876663192 4.202987746952145 2008-Oct-06 21:45:19 INFO2 take_data: Starting WAPP+GALFA scan: 828000274 2008-Oct-06 21:45:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:45:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:45:20 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-06 21:45:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:45:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-06 21:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.648 (still bad) 2008-Oct-06 21:45:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:45:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:45:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:45:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6321.00 2008-Oct-06 21:45:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:45:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.649 (still bad) 2008-Oct-06 21:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.623 (still bad) 2008-Oct-06 21:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.619 (still bad) 2008-Oct-06 21:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.617 (still bad) 2008-Oct-06 21:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.627 (still bad) 2008-Oct-06 21:45:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:45:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:45:31 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-Oct-06 21:45:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:45:31 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Oct-06 21:45:31 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-06 21:45:31 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-06 21:45:31 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-06 21:45:31 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:45:31 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:45:31 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:45:31 LOG2 antvel: Parameters to Doppler: Topocentric 92731 2008 280 0.0 2008-Oct-06 21:45:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:45:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-06 21:45:31 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-06 21:45:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:45:31 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:45:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-06 21:45:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:45:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:45:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:45:31 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-06 21:45:31 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.380469 2008.7690803800037 18.999933 2008-Oct-06 21:45:31 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666691 4.136666666666664 2008-Oct-06 21:45:31 LOG4 log_alfabeam: ALFABEAM 1 22.315913702834688 4.242207776414094 2008-Oct-06 21:45:31 LOG4 log_alfabeam: ALFABEAM 2 22.311047529333923 4.176547781502457 2008-Oct-06 21:45:31 LOG4 log_alfabeam: ALFABEAM 3 22.311773117473749 4.070949965565565 2008-Oct-06 21:45:31 LOG4 log_alfabeam: ALFABEAM 4 22.317436323064474 4.031131851718149 2008-Oct-06 21:45:31 LOG4 log_alfabeam: ALFABEAM 5 22.322314855619215 4.097267221208385 2008-Oct-06 21:45:31 LOG4 log_alfabeam: ALFABEAM 6 22.321517839469369 4.202742738864458 2008-Oct-06 21:45:31 INFO2 take_data: Starting WAPP+GALFA scan: 828000275 2008-Oct-06 21:45:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:45:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:45:32 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-06 21:45:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:45:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-06 21:45:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:45:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:45:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.620 (still bad) 2008-Oct-06 21:45:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6333.00 2008-Oct-06 21:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.620 (still bad) 2008-Oct-06 21:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.615 (still bad) 2008-Oct-06 21:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.611 (still bad) 2008-Oct-06 21:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.609 (still bad) 2008-Oct-06 21:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.618 (still bad) 2008-Oct-06 21:45:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:45:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:45:43 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Oct-06 21:45:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:45:43 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Oct-06 21:45:43 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-06 21:45:43 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-06 21:45:43 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-06 21:45:43 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:45:43 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:45:43 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:45:43 LOG2 antvel: Parameters to Doppler: Topocentric 92743 2008 280 0.0 2008-Oct-06 21:45:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:45:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-06 21:45:43 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-06 21:45:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:45:43 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:45:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-06 21:45:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:45:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:45:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:45:43 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-06 21:45:43 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.383812 2008.7690807602607 18.999933 2008-Oct-06 21:45:43 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666727 4.136666666666664 2008-Oct-06 21:45:43 LOG4 log_alfabeam: ALFABEAM 1 22.315937553311297 4.242245249882384 2008-Oct-06 21:45:43 LOG4 log_alfabeam: ALFABEAM 2 22.311056567959081 4.176831658234327 2008-Oct-06 21:45:43 LOG4 log_alfabeam: ALFABEAM 3 22.311758303221737 4.071197765333233 2008-Oct-06 21:45:43 LOG4 log_alfabeam: ALFABEAM 4 22.317412476585154 4.031093532708547 2008-Oct-06 21:45:43 LOG4 log_alfabeam: ALFABEAM 5 22.322305918111745 4.096981766994278 2008-Oct-06 21:45:43 LOG4 log_alfabeam: ALFABEAM 6 22.321532745412256 4.202497000443135 2008-Oct-06 21:45:43 INFO2 take_data: Starting WAPP+GALFA scan: 828000276 2008-Oct-06 21:45:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:45:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:45:44 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-06 21:45:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:45:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-06 21:45:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:45:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:45:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:45:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6345.00 2008-Oct-06 21:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.611 (still bad) 2008-Oct-06 21:45:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:45:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.589 (still bad) 2008-Oct-06 21:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.589 (still bad) 2008-Oct-06 21:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.586 (still bad) 2008-Oct-06 21:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.590 (still bad) 2008-Oct-06 21:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.589 (still bad) 2008-Oct-06 21:45:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:45:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:45:55 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Oct-06 21:45:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:45:55 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Oct-06 21:45:55 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Oct-06 21:45:55 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Oct-06 21:45:55 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-06 21:45:55 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:45:55 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:45:55 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:45:55 LOG2 antvel: Parameters to Doppler: Topocentric 92755 2008 280 0.0 2008-Oct-06 21:45:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:45:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-06 21:45:55 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-06 21:45:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:45:55 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:45:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-06 21:45:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:45:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:45:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:45:55 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-06 21:45:55 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.387154 2008.7690811405178 18.999933 2008-Oct-06 21:45:55 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666698 4.136666666666668 2008-Oct-06 21:45:55 LOG4 log_alfabeam: ALFABEAM 1 22.315961394502022 4.242281490916895 2008-Oct-06 21:45:55 LOG4 log_alfabeam: ALFABEAM 2 22.311065663776485 4.177114865575238 2008-Oct-06 21:45:55 LOG4 log_alfabeam: ALFABEAM 3 22.311743556093866 4.071446127589175 2008-Oct-06 21:45:55 LOG4 log_alfabeam: ALFABEAM 4 22.317388638995293 4.031056446681576 2008-Oct-06 21:45:55 LOG4 log_alfabeam: ALFABEAM 5 22.322296922607553 4.096696972520663 2008-Oct-06 21:45:55 LOG4 log_alfabeam: ALFABEAM 6 22.321547585115020 4.202250688324374 2008-Oct-06 21:45:55 INFO2 take_data: Starting WAPP+GALFA scan: 828000277 2008-Oct-06 21:45:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:45:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:45:56 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-06 21:45:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:45:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-06 21:45:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:45:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:45:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:45:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6357.00 2008-Oct-06 21:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.587 (still bad) 2008-Oct-06 21:45:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:45:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.548 (still bad) 2008-Oct-06 21:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.545 (still bad) 2008-Oct-06 21:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.543 (still bad) 2008-Oct-06 21:46:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:46:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.532 1.253 1.301 1.258 2008-Oct-06 21:46:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.392 1.349 1.236 1.436 2008-Oct-06 21:46:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.523 1.533 1.547 1.194 2008-Oct-06 21:46:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.398 0.090 1.232 0.101 2008-Oct-06 21:46:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:46:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:46:07 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Oct-06 21:46:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:46:07 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Oct-06 21:46:07 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Oct-06 21:46:07 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Oct-06 21:46:07 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-06 21:46:07 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:46:07 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:46:07 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:46:07 LOG2 antvel: Parameters to Doppler: Topocentric 92767 2008 280 0.0 2008-Oct-06 21:46:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:46:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-06 21:46:07 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-06 21:46:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:46:07 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:46:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-06 21:46:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:46:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:46:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:46:07 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-06 21:46:07 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.390497 2008.7690815207748 18.999933 2008-Oct-06 21:46:07 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666691 4.136666666666667 2008-Oct-06 21:46:07 LOG4 log_alfabeam: ALFABEAM 1 22.315985239820513 4.242316521556750 2008-Oct-06 21:46:07 LOG4 log_alfabeam: ALFABEAM 2 22.311074821820501 4.177397563643880 2008-Oct-06 21:46:07 LOG4 log_alfabeam: ALFABEAM 3 22.311728867709011 4.071695191146558 2008-Oct-06 21:46:07 LOG4 log_alfabeam: ALFABEAM 4 22.317364796883854 4.031020571153847 2008-Oct-06 21:46:07 LOG4 log_alfabeam: ALFABEAM 5 22.322287864126174 4.096412676848021 2008-Oct-06 21:46:07 LOG4 log_alfabeam: ALFABEAM 6 22.321562367006269 4.202003664785709 2008-Oct-06 21:46:07 INFO2 take_data: Starting WAPP+GALFA scan: 828000278 2008-Oct-06 21:46:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:46:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:46:08 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-06 21:46:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:46:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-06 21:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.545 (still bad) 2008-Oct-06 21:46:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:46:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:46:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:46:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6369.00 2008-Oct-06 21:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.533 (still bad) 2008-Oct-06 21:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.535 (still bad) 2008-Oct-06 21:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.534 (still bad) 2008-Oct-06 21:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.534 (still bad) 2008-Oct-06 21:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.538 (still bad) 2008-Oct-06 21:46:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:46:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:46:19 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2008-Oct-06 21:46:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:46:19 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Oct-06 21:46:19 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Oct-06 21:46:19 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Oct-06 21:46:19 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-06 21:46:19 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:46:19 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:46:19 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:46:19 LOG2 antvel: Parameters to Doppler: Topocentric 92779 2008 280 0.0 2008-Oct-06 21:46:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:46:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-06 21:46:19 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-06 21:46:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:46:19 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:46:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-06 21:46:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:46:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-06 21:46:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-06 21:46:19 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-06 21:46:19 LOG5 log_alfabeam: Parameters: 22.316666666666666 4.1366666666666667 22.393839 2008.7690819010318 18.999933 2008-Oct-06 21:46:19 LOG4 log_alfabeam: ALFABEAM 0 22.316666666666695 4.136666666666664 2008-Oct-06 21:46:19 LOG4 log_alfabeam: ALFABEAM 1 22.316009074148560 4.242350321326643 2008-Oct-06 21:46:19 LOG4 log_alfabeam: ALFABEAM 2 22.311084036197251 4.177679574027326 2008-Oct-06 21:46:19 LOG4 log_alfabeam: ALFABEAM 3 22.311714247291285 4.071944797130953 2008-Oct-06 21:46:19 LOG4 log_alfabeam: ALFABEAM 4 22.317340965367077 4.030985927167304 2008-Oct-06 21:46:19 LOG4 log_alfabeam: ALFABEAM 5 22.322278748495467 4.096129059475134 2008-Oct-06 21:46:19 LOG4 log_alfabeam: ALFABEAM 6 22.321577081797741 4.201756087346801 2008-Oct-06 21:46:19 INFO2 take_data: Starting WAPP+GALFA scan: 828000279 2008-Oct-06 21:46:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-06 21:46:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-06 21:46:20 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-06 21:46:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:46:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-06 21:46:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:46:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:46:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.533 (still bad) 2008-Oct-06 21:46:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6381.00 2008-Oct-06 21:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.522 (still bad) 2008-Oct-06 21:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.526 (still bad) 2008-Oct-06 21:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.525 (still bad) 2008-Oct-06 21:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.524 (still bad) 2008-Oct-06 21:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.521 (still bad) 2008-Oct-06 21:46:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:46:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-06 21:46:31 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-Oct-06 21:46:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-06 21:46:31 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Oct-06 21:46:31 INFO2 smartfreq: Switching off CAL 2008-Oct-06 21:46:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-06 21:46:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-06 21:46:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 21:46:31 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-06 21:46:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 21:46:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-06 21:46:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 21:46:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 21:46:31 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Oct-06 21:46:31 INFO3 restore_frequencies: Restoring original frequencies 2008-Oct-06 21:46:31 LOG5 antvel: Calling 'antvel 221900.000000 40812.000000 J 0' 2008-Oct-06 21:46:31 LOG2 antvel: Precessing RA = 22:19:00.0 Dec = +04:08:12.0 Epoch = 2008.76908 J 2008-Oct-06 21:46:31 LOG2 antvel: Computed apparent RA = 22:19:28.2 Dec = +04:11:00.8 2008-Oct-06 21:46:31 LOG2 antvel: Parameters to Doppler: Topocentric 92791 2008 280 0.0 2008-Oct-06 21:46:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:46:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-06 21:46:31 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-06 21:46:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:46:31 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:46:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-06 21:46:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:46:31 STOP finish_task: Finishing task 'smart frequency switching' 2008-Oct-06 21:46:31 LOG5 finish_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-06 21:46:31 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Oct-06 21:46:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:46:31 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Oct-06 21:46:31 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-06 21:46:31 NOTE run_command_file: DONE with command file processing 2008-Oct-06 21:46:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Oct-06 21:46:32 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Oct-06 21:46:32 LOG5 finish_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-06 21:46:32 DONE finish_task: DONE finished running: command file 'command_galfasrc' 2008-Oct-06 21:46:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:46:32 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'OK' 2008-Oct-06 21:46:32 LOG5 end_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-06 21:46:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-06 21:46:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:46:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:46:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.521 (still bad) 2008-Oct-06 21:46:41 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-06 21:46:41 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-06 21:46:41 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-06 21:46:41 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-06 21:46:41 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-06 21:46:41 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-06 21:46:41 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-06 21:46:41 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-06 21:46:41 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2008-Oct-06 21:46:41 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-06 21:46:41 LOG3 exec_msg: Closing socket 2008-Oct-06 21:46:41 LOG3 exec_msg: Closing socket 2008-Oct-06 21:46:41 LOG3 exec_msg: Closing socket 2008-Oct-06 21:46:41 LOG3 exec_msg: Closing socket 2008-Oct-06 21:46:44 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-06 21:46:44 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-06 21:46:44 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-06 21:46:44 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-06 21:46:53 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-06 21:46:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-06 21:46:55 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-06 21:46:55 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-06 21:46:55 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-06 21:46:55 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-06 21:46:55 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-06 21:46:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-06 21:46:55 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-06 21:46:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 21:46:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-06 21:46:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 21:46:55 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-06 21:46:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 21:46:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 21:46:55 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Oct-06 21:46:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 21:46:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-06 21:46:55 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-06 21:46:55 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-06 21:46:55 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-06 21:46:55 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-06 21:46:55 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-06 21:46:55 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-06 21:46:55 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-06 21:46:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-06 21:46:56 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-06 21:46:56 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-06 21:46:56 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-06 21:46:56 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-06 21:46:56 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-06 21:46:56 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-06 21:46:56 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-06 21:46:56 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-06 21:46:56 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-06 21:46:56 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-06 21:46:56 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-06 21:46:56 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-06 21:46:56 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-06 21:46:56 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-06 21:46:56 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-06 21:46:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:46:56 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-06 21:46:56 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-06 21:46:56 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-06 21:46:56 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-06 21:46:56 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-06 21:46:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-06 21:46:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:46:56 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-06 21:46:56 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-06 21:46:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-06 21:46:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-06 21:46:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:46:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:46:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:46:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:46:56 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-06 21:46:56 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-06 21:46:56 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Oct-06 21:46:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-06 21:46:56 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-06 21:46:56 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-06 21:46:56 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-06 21:46:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:46:56 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-06 21:46:56 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2008-Oct-06 21:46:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:46:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-06 21:46:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-06 21:46:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-06 21:46:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-06 21:46:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-06 21:46:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-06 21:46:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-06 21:46:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-06 21:46:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-06 21:46:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-06 21:46:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-06 21:46:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-06 21:46:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-06 21:46:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-06 21:46:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-06 21:46:57 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-06 21:46:57 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-06 21:46:57 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-06 21:46:57 LOG5 begin_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-06 21:46:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-06 21:46:57 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-06 21:46:57 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-06 21:46:57 START begin_task: Starting task 'selecting calibration port' 2008-Oct-06 21:46:57 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-06 21:46:57 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-06 21:46:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-06 21:46:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:46:57 START begin_task: Starting task 'waiting on calport' 2008-Oct-06 21:46:57 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-06 21:46:57 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-06 21:46:57 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-06 21:46:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:46:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:46:57 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-06 21:46:57 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-06 21:46:57 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Oct-06 21:46:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-06 21:46:57 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-06 21:46:57 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-Oct-06 21:46:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-06 21:46:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-06 21:46:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 21:46:57 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-06 21:46:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 21:46:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:46:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-06 21:46:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 21:46:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 21:46:57 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Oct-06 21:46:57 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-06 21:46:57 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-06 21:46:57 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-06 21:46:57 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-06 21:46:57 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-06 21:46:57 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-06 21:46:57 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-06 21:46:57 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-06 21:46:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-06 21:46:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-06 21:46:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-06 21:46:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-06 21:46:57 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-06 21:46:57 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-06 21:46:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 21:46:57 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-06 21:46:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-06 21:46:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-06 21:46:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 21:46:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-06 21:46:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-06 21:46:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 21:46:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 21:46:58 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Oct-06 21:46:58 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-06 21:46:58 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-06 21:46:58 LOG5 finish_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-06 21:46:58 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-06 21:46:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:46:58 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-06 21:46:58 LOG5 end_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2008-Oct-06 21:46:58 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-06 21:46:58 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-06 21:46:58 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-06 21:46:58 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-06 21:46:58 LOG5 begin_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-06 21:46:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-06 21:46:58 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-06 21:46:58 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-06 21:46:58 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-06 21:46:58 LOG5 finish_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-06 21:46:58 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-06 21:46:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:46:58 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-06 21:46:58 LOG5 end_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2008-Oct-06 21:46:59 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-06 21:46:59 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-06 21:46:59 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-06 21:47:13 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-06 21:47:13 LOG4 exec_msg: From OBSERVER: track_new_source drift17p2 222500.0 +040812 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-06 21:47:13 LOG1 track_new_source: Calling 'track_new_source drift17p2 222500.0 +040812 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-06 21:47:13 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-06 21:47:13 LOG5 begin_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-06 21:47:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift17p2} INFO {Selecting source 'drift17p2' ...} 2008-Oct-06 21:47:13 LOG3 track_source: Calling 'track_source drift17p2 222500.0 +040812 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-06 21:47:13 START begin_task: Starting task 'sending tracking commands' 2008-Oct-06 21:47:13 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-06 21:47:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift17p2} INFO {Slewing to source 'drift17p2' ...} 2008-Oct-06 21:47:13 INFO1 track_source: Starting to track drift17p2 2008-Oct-06 21:47:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift17p2" 2008-Oct-06 21:47:13 LOG3 vw_send: To DATATAKING: set ra 222500.0 2008-Oct-06 21:47:13 LOG3 vw_send: To DATATAKING: set dec +040812 2008-Oct-06 21:47:13 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-06 21:47:13 LOG3 vw_send: To DATATAKING: pnt tr 222500.0 +040812 -CJ 2008-Oct-06 21:47:13 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-06 21:47:13 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-06 21:47:13 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-06 21:47:13 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-06 21:47:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:47:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-06 21:47:14 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Oct-06 21:47:14 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-06 21:47:14 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-06 21:47:14 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-06 21:47:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-06 21:47:14 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-06 21:47:14 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-06 21:47:14 LOG5 finish_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-06 21:47:14 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-06 21:47:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:47:14 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-06 21:47:14 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Oct-06 21:47:14 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-06 21:47:14 LOG5 finish_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-06 21:47:14 DONE finish_task: DONE finished selecting: new source 2008-Oct-06 21:47:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:47:14 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-06 21:47:14 LOG5 end_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2008-Oct-06 21:47:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift17p2" 2008-Oct-06 21:47:14 LOG4 got_cormsg: From DATATAKING: set ra 222500.0 2008-Oct-06 21:47:14 LOG4 got_cormsg: From DATATAKING: set dec +040812 2008-Oct-06 21:47:14 LOG4 got_cormsg: From DATATAKING: vw% 222500.0 2008-Oct-06 21:47:14 LOG4 got_cormsg: From DATATAKING: vw% +040812 2008-Oct-06 21:47:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:47:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-06 21:47:14 LOG4 got_cormsg: From DATATAKING: pnt tr 222500.0 +040812 -CJ 2008-Oct-06 21:47:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-06 21:47:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:47:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-06 21:47:14 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-06 21:47:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:47:45 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Oct-06 21:47:45 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Oct-06 21:47:45 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Oct-06 21:47:45 LOG5 begin_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-06 21:47:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-06 21:47:45 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-06 21:47:45 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-06 21:47:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-06 21:47:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:47:45 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-06 21:47:45 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-06 21:47:45 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-06 21:47:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:47:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:47:48 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-06 21:47:48 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-06 21:47:48 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2008-Oct-06 21:47:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-06 21:47:48 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-06 21:47:48 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-06 21:47:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-06 21:47:48 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-06 21:47:48 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-06 21:47:48 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-06 21:47:48 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-06 21:47:48 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-06 21:47:48 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-06 21:47:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-06 21:47:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:47:48 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-06 21:47:48 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 4 5 dB 2008-Oct-06 21:47:48 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 2 dB 2008-Oct-06 21:47:48 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Oct-06 21:47:48 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-06 21:47:48 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-06 21:47:48 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Oct-06 21:47:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.115 0.934 ALFA beam 1: 0.986 0.954 2008-Oct-06 21:47:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.017 0.973 ALFA beam 3: 0.884 1.030 2008-Oct-06 21:47:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.081 1.077 ALFA beam 5: 1.119 0.897 2008-Oct-06 21:47:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.982 0.088 ALFA beam 7: 0.873 0.098 2008-Oct-06 21:47:48 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-06 21:47:48 LOG5 finish_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-06 21:47:48 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Oct-06 21:47:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:47:48 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-06 21:47:48 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2008-Oct-06 21:47:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Oct-06 21:47:49 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-06 21:47:49 LOG5 finish_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-06 21:47:49 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-06 21:47:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-06 21:47:49 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-06 21:47:49 LOG5 end_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2008-Oct-06 21:47:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.088 < 0.75)! 2008-Oct-06 21:47:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 0.934 0.986 0.954 2008-Oct-06 21:47:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.973 0.884 1.030 2008-Oct-06 21:47:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 1.077 1.119 0.897 2008-Oct-06 21:47:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 0.088 0.873 0.098 2008-Oct-06 21:47:52 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Oct-06 21:47:52 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift17p2 222500.0 +040812 J 0 Topocentric velocity(optical) 2008-Oct-06 21:47:52 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift17p2 222500.0 +040812 J 0 Topocentric velocity(optical)' 2008-Oct-06 21:47:52 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Oct-06 21:47:52 LOG5 begin_task: Level: (1) ID = <10120> Status = 0 0 0 0 ok 2008-Oct-06 21:47:52 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift17p2' 2008-Oct-06 21:47:52 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Oct-06 21:47:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift17p2} 2008-Oct-06 21:47:52 INFO5 fixed_driftmap: Start: year = 2008.7690848163359 RA = 22:25:28.2 Dec = +04:11:02.9 2008-Oct-06 21:47:52 NOTE fixed_driftmap: Setting ZA to 14:10:10.8 ... 2008-Oct-06 21:47:52 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 14.17 2008-Oct-06 21:47:52 LOG3 track_source: Calling 'track_source drift17p2 360.0 14.1696588085 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Oct-06 21:47:52 START begin_task: Starting task 'sending tracking commands' 2008-Oct-06 21:47:52 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-06 21:47:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift17p2} INFO {Slewing to source 'drift17p2' ...} 2008-Oct-06 21:47:52 INFO1 track_source: Starting to track drift17p2 2008-Oct-06 21:47:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift17p2" 2008-Oct-06 21:47:52 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Oct-06 21:47:52 LOG3 vw_send: To DATATAKING: set dec 14.1696588085 2008-Oct-06 21:47:52 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-06 21:47:52 LOG3 vw_send: To DATATAKING: pnt tr 360.0 14.1696588085 -CF 2008-Oct-06 21:47:52 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-06 21:47:52 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-06 21:47:52 LOG5 finish_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-06 21:47:52 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-06 21:47:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:47:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-06 21:47:52 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Oct-06 21:47:52 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-06 21:47:52 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-06 21:47:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-06 21:47:52 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-06 21:47:52 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Oct-06 21:47:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-06 21:47:52 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-06 21:47:52 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-06 21:47:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift17p2" 2008-Oct-06 21:47:52 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Oct-06 21:47:52 LOG4 got_cormsg: From DATATAKING: set dec 14.1696588085 2008-Oct-06 21:47:52 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Oct-06 21:47:52 LOG4 got_cormsg: From DATATAKING: vw% 14.1696588085 2008-Oct-06 21:47:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:47:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-06 21:47:52 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 14.1696588085 -CF 2008-Oct-06 21:47:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-06 21:47:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-06 21:47:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:47:53 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-06 21:47:53 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-06 21:47:53 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-06 21:47:53 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Oct-06 21:47:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-06 21:47:53 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-06 21:47:53 LOG5 finish_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-06 21:47:53 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-06 21:47:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:47:53 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-06 21:47:53 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Oct-06 21:47:53 START begin_task: Starting task 'waiting on telescope' 2008-Oct-06 21:47:53 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-06 21:47:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-06 21:47:53 LOG3 waittrk: Start waittrk 5 2008-Oct-06 21:47:53 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-06 21:47:53 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-06 21:47:58 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-06 21:47:58 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Oct-06 21:47:58 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-06 21:47:58 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-06 21:48:04 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-06 21:48:04 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2008-Oct-06 21:48:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Oct-06 21:48:04 INFO2 waittrk: Now tracking drift17p2 2008-Oct-06 21:48:05 LOG4 waittrk: Current telescope position: Az = 359.63 ZA = 14.14 2008-Oct-06 21:48:05 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-06 21:48:05 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-06 21:48:05 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Oct-06 21:48:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:48:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-06 21:48:05 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Oct-06 21:48:05 START begin_task: Starting task 'selecting calibration type' 2008-Oct-06 21:48:05 LOG5 begin_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-06 21:48:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-06 21:48:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-06 21:48:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:48:05 START begin_task: Starting task 'waiting on setcal' 2008-Oct-06 21:48:05 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-06 21:48:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-06 21:48:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:48:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:48:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-06 21:48:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-06 21:48:05 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Oct-06 21:48:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-06 21:48:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 21:48:05 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-06 21:48:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 21:48:05 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-06 21:48:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:48:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 21:48:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 21:48:06 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Oct-06 21:48:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 21:48:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-06 21:48:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 21:48:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-06 21:48:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 21:48:06 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-06 21:48:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 21:48:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 21:48:06 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Oct-06 21:48:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 21:48:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-06 21:48:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-06 21:48:06 LOG5 end_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2008-Oct-06 21:48:06 LOG5 dopset_later: Calling 'dopset_later 4.0947158976877507' 2008-Oct-06 21:48:06 INFO3 dopset_later: Setting Doppler correction for 21:48:09 (4.1 seconds from now) 2008-Oct-06 21:48:06 LOG5 antvel: Calling 'antvel 360.000000 14.169659 F 4.0947158976877507' 2008-Oct-06 21:48:06 LOG2 antvel: Transforming current Az = 360.00 ZA = 14.17 to apparent RA = 22:25:28.2 Dec = +04:11:02.9 2008-Oct-06 21:48:06 LOG2 antvel: Parameters to Doppler: Topocentric 92889 2008 280 0.0 2008-Oct-06 21:48:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-06 21:48:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Oct-06 21:48:06 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Oct-06 21:48:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-06 21:48:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-06 21:48:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-06 21:48:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:48:06 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-06 21:48:06 LOG5 begin_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-06 21:48:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-06 21:48:06 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-06 21:48:06 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-06 21:48:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-06 21:48:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:48:06 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-06 21:48:06 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-06 21:48:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-06 21:48:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-06 21:48:06 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-06 21:48:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:48:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:48:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:48:06 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-06 21:48:06 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-06 21:48:06 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Oct-06 21:48:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-06 21:48:06 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-06 21:48:06 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-06 21:48:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-06 21:48:06 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-06 21:48:06 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-06 21:48:06 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-06 21:48:06 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-06 21:48:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-06 21:48:06 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-06 21:48:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-06 21:48:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:48:07 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-06 21:48:07 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 5 5 dB 2008-Oct-06 21:48:07 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 2 dB 2008-Oct-06 21:48:07 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 1 0 dB 2008-Oct-06 21:48:07 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-06 21:48:07 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-06 21:48:07 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2008-Oct-06 21:48:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.117 0.936 ALFA beam 1: 0.987 0.952 2008-Oct-06 21:48:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.021 0.999 ALFA beam 3: 0.900 1.058 2008-Oct-06 21:48:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.103 1.104 ALFA beam 5: 0.896 0.902 2008-Oct-06 21:48:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.006 0.090 ALFA beam 7: 1.107 0.100 2008-Oct-06 21:48:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-06 21:48:07 LOG5 finish_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-06 21:48:07 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-06 21:48:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:48:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-06 21:48:07 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Oct-06 21:48:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-06 21:48:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-06 21:48:07 LOG5 finish_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-06 21:48:07 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-06 21:48:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:48:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-06 21:48:07 LOG5 end_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2008-Oct-06 21:48:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-06 21:48:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-06 21:48:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-06 21:48:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-06 21:48:07 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 22:25:28.2 LST = 22:25:26.1 diff = 2.1 secs 2008-Oct-06 21:48:07 INFO2 fixed_driftmap: Waiting 0.1 seconds for RA 22:25:28 2008-Oct-06 21:48:07 INFO2 lstwait: Already reached requested LST 22:25:26 2008-Oct-06 21:48:07 START begin_task: Starting task 'waiting on wait on LST' 2008-Oct-06 21:48:07 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-06 21:48:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-06 21:48:07 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Oct-06 21:48:07 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Oct-06 21:48:07 LOG4 lstwait: Finished waiting -0.10 seconds late 2008-Oct-06 21:48:07 INFO3 lstwait: Finished waiting 2008-Oct-06 21:48:07 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-06 21:48:07 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Oct-06 21:48:07 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-06 21:48:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-06 21:48:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-06 21:48:08 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-06 21:48:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-06 21:48:08 LOG5 begin_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-06 21:48:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-06 21:48:08 INFO2 take_data: Starting WAPP scan: 828000280 2008-Oct-06 21:48:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-06 21:48:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-06 21:48:08 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-06 21:48:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:48:08 NOTE WAPPDATA-new_file: New FITS file: wapp.20081006.a2010.0017.fits 2008-Oct-06 21:48:08 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081006.a2010.0017.fits} 2008-Oct-06 21:48:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6489.00 2008-Oct-06 21:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:48:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.114 (still bad) 2008-Oct-06 21:48:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:48:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 0.933 0.979 0.946 2008-Oct-06 21:48:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.998 0.902 1.057 2008-Oct-06 21:48:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 1.111 0.897 0.904 2008-Oct-06 21:48:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.090 1.111 0.100 2008-Oct-06 21:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.113 (still bad) 2008-Oct-06 21:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.114 (still bad) 2008-Oct-06 21:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:49:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:49:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 0.937 0.972 0.942 2008-Oct-06 21:49:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.997 0.902 1.060 2008-Oct-06 21:49:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 1.115 0.898 0.905 2008-Oct-06 21:49:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.090 1.116 0.100 2008-Oct-06 21:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 21:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 21:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 21:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:50:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:50:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.123 0.943 0.977 0.946 2008-Oct-06 21:50:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.999 0.911 1.067 2008-Oct-06 21:50:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 1.111 0.903 0.911 2008-Oct-06 21:50:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.090 1.118 0.100 2008-Oct-06 21:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 21:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 21:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:51:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:51:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 0.934 0.976 0.941 2008-Oct-06 21:51:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.998 0.904 1.060 2008-Oct-06 21:51:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 1.108 0.895 0.905 2008-Oct-06 21:51:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.090 1.116 0.100 2008-Oct-06 21:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 21:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:52:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:52:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 0.936 0.974 0.940 2008-Oct-06 21:52:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.996 0.904 1.060 2008-Oct-06 21:52:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 1.106 0.897 0.903 2008-Oct-06 21:52:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.090 1.114 0.100 2008-Oct-06 21:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.114 (still bad) 2008-Oct-06 21:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:53:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:53:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 0.934 0.973 0.941 2008-Oct-06 21:53:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.997 0.905 1.061 2008-Oct-06 21:53:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 1.103 0.908 0.913 2008-Oct-06 21:53:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.090 1.114 0.100 2008-Oct-06 21:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.135 (still bad) 2008-Oct-06 21:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.138 (still bad) 2008-Oct-06 21:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.146 (still bad) 2008-Oct-06 21:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.155 (still bad) 2008-Oct-06 21:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.157 (still bad) 2008-Oct-06 21:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.154 (still bad) 2008-Oct-06 21:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.152 (still bad) 2008-Oct-06 21:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.138 (still bad) 2008-Oct-06 21:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 21:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:54:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:54:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 0.937 0.980 0.943 2008-Oct-06 21:54:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 1.000 0.905 1.063 2008-Oct-06 21:54:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 1.107 0.898 0.904 2008-Oct-06 21:54:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.090 1.116 0.100 2008-Oct-06 21:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.121 (still bad) 2008-Oct-06 21:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:56:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:56:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 0.939 0.974 0.943 2008-Oct-06 21:56:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.998 0.906 1.062 2008-Oct-06 21:56:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 1.118 0.898 0.905 2008-Oct-06 21:56:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.090 1.117 0.100 2008-Oct-06 21:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.118 (still bad) 2008-Oct-06 21:57:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:57:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 0.938 0.977 0.943 2008-Oct-06 21:57:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 1.000 0.905 1.064 2008-Oct-06 21:57:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 1.106 0.903 0.911 2008-Oct-06 21:57:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.090 1.116 0.100 2008-Oct-06 21:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.114 (still bad) 2008-Oct-06 21:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 21:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 21:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.135 (still bad) 2008-Oct-06 21:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.144 (still bad) 2008-Oct-06 21:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.146 (still bad) 2008-Oct-06 21:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.148 (still bad) 2008-Oct-06 21:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.149 (still bad) 2008-Oct-06 21:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.141 (still bad) 2008-Oct-06 21:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.134 (still bad) 2008-Oct-06 21:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.130 (still bad) 2008-Oct-06 21:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 21:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 21:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 21:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 21:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 21:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 21:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:58:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:58:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.114 0.940 0.977 0.943 2008-Oct-06 21:58:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.999 0.908 1.065 2008-Oct-06 21:58:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 1.107 0.897 0.905 2008-Oct-06 21:58:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.090 1.114 0.100 2008-Oct-06 21:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:58:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:58:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-06 21:58:09 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-Oct-06 21:58:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-06 21:58:09 LOG5 end_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2008-Oct-06 21:58:09 LOG1 fixed_driftmap: New position: year = 2008.7691043995742 RA = 22:35:02.1 RA/Dec = 22:35:30.4 +04:11:06.2 2008-Oct-06 21:58:09 NOTE fixed_driftmap: Correcting ZA to 14:10:07.5 ... 2008-Oct-06 21:58:09 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.1687562047 -CF 2008-Oct-06 21:58:09 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-06 21:58:09 START begin_task: Starting task 'WAPP calibration' 2008-Oct-06 21:58:09 LOG5 begin_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-06 21:58:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-06 21:58:09 START begin_task: Starting task 'selecting calibration type' 2008-Oct-06 21:58:09 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-06 21:58:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-06 21:58:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-06 21:58:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:58:09 START begin_task: Starting task 'waiting on setcal' 2008-Oct-06 21:58:09 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-06 21:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:58:09 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.1687562047 -CF 2008-Oct-06 21:58:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:58:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-06 21:58:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 21:58:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:58:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-06 21:58:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-06 21:58:09 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2008-Oct-06 21:58:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-06 21:58:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 21:58:09 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-06 21:58:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 21:58:09 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-06 21:58:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 21:58:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 21:58:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 21:58:10 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Oct-06 21:58:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 21:58:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-06 21:58:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 21:58:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-06 21:58:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 21:58:10 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-06 21:58:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 21:58:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 21:58:10 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Oct-06 21:58:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 21:58:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-06 21:58:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-06 21:58:10 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Oct-06 21:58:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-06 21:58:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-06 21:58:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-06 21:58:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 21:58:10 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-06 21:58:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 21:58:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-06 21:58:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 21:58:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 21:58:10 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Oct-06 21:58:10 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-06 21:58:10 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-06 21:58:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-06 21:58:10 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-06 21:58:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-06 21:58:10 INFO2 take_data: Starting WAPP scan: 828000281 2008-Oct-06 21:58:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-06 21:58:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-06 21:58:11 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-06 21:58:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:58:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7092.00 2008-Oct-06 21:58:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:58:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 21:58:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-06 21:58:13 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2008-Oct-06 21:58:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-06 21:58:13 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Oct-06 21:58:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-06 21:58:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-06 21:58:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-06 21:58:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 21:58:13 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-06 21:58:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 21:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.532 (still bad) 2008-Oct-06 21:58:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-06 21:58:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 21:58:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 21:58:13 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2008-Oct-06 21:58:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-06 21:58:13 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-06 21:58:13 LOG5 finish_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-06 21:58:13 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-06 21:58:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 21:58:13 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-06 21:58:13 LOG5 end_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2008-Oct-06 21:58:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Oct-06 21:58:14 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Oct-06 21:58:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-06 21:58:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-06 21:58:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-06 21:58:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-06 21:58:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-06 21:58:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-06 21:58:14 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-06 21:58:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-06 21:58:14 LOG5 begin_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-06 21:58:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-06 21:58:14 INFO2 take_data: Starting WAPP scan: 828000282 2008-Oct-06 21:58:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-06 21:58:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-06 21:58:14 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-06 21:58:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-06 21:58:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 21:58:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7095.00 2008-Oct-06 21:58:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20081006.a2010.0018.fits 2008-Oct-06 21:58:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081006.a2010.0018.fits} 2008-Oct-06 21:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 21:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 21:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 21:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 21:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 21:59:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 21:59:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 0.938 0.977 0.944 2008-Oct-06 21:59:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 1.003 0.905 1.065 2008-Oct-06 21:59:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 1.118 0.898 0.905 2008-Oct-06 21:59:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.090 1.113 0.100 2008-Oct-06 21:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 21:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 21:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 21:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 21:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 21:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 21:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.123 (still bad) 2008-Oct-06 21:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 21:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 21:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 21:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 21:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 21:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 21:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 21:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 21:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 21:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 21:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:00:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:00:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 0.938 0.982 0.947 2008-Oct-06 22:00:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 1.000 0.905 1.064 2008-Oct-06 22:00:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 1.113 0.898 0.905 2008-Oct-06 22:00:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.090 1.125 0.100 2008-Oct-06 22:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 22:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 22:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 22:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.115 (still bad) 2008-Oct-06 22:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 22:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 22:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 22:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.134 (still bad) 2008-Oct-06 22:01:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:01:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 0.942 0.979 0.944 2008-Oct-06 22:01:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 1.003 0.908 1.063 2008-Oct-06 22:01:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 1.119 0.898 0.907 2008-Oct-06 22:01:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.090 1.142 0.100 2008-Oct-06 22:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.143 (still bad) 2008-Oct-06 22:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.143 (still bad) 2008-Oct-06 22:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.141 (still bad) 2008-Oct-06 22:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.134 (still bad) 2008-Oct-06 22:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 22:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 22:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 22:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 22:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:02:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:02:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 0.943 0.976 0.944 2008-Oct-06 22:02:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 1.006 0.905 1.064 2008-Oct-06 22:02:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 1.109 0.897 0.907 2008-Oct-06 22:02:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.090 1.116 0.101 2008-Oct-06 22:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 22:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-06 22:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:03:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:03:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 0.942 0.978 0.945 2008-Oct-06 22:03:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 1.001 0.905 1.065 2008-Oct-06 22:03:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 1.109 0.897 0.908 2008-Oct-06 22:03:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 0.090 1.119 0.101 2008-Oct-06 22:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:04:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:04:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 0.941 0.976 0.948 2008-Oct-06 22:04:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 1.002 0.907 1.065 2008-Oct-06 22:04:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 1.122 0.898 0.907 2008-Oct-06 22:04:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.090 1.114 0.101 2008-Oct-06 22:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.123 (still bad) 2008-Oct-06 22:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:05:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:05:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 0.941 0.978 0.947 2008-Oct-06 22:05:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 1.003 0.907 1.066 2008-Oct-06 22:05:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 1.115 0.899 0.907 2008-Oct-06 22:05:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.090 1.114 0.100 2008-Oct-06 22:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.117 (still bad) 2008-Oct-06 22:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:06:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:06:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 0.942 0.979 0.947 2008-Oct-06 22:06:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 1.000 0.909 1.065 2008-Oct-06 22:06:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 1.123 0.899 0.907 2008-Oct-06 22:06:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 0.090 1.120 0.101 2008-Oct-06 22:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:07:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:07:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 0.939 0.981 0.948 2008-Oct-06 22:07:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 1.000 0.908 1.065 2008-Oct-06 22:07:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 1.122 0.898 0.907 2008-Oct-06 22:07:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.090 1.120 0.100 2008-Oct-06 22:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:08:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 22:08:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-06 22:08:15 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-Oct-06 22:08:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-06 22:08:15 LOG5 end_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2008-Oct-06 22:08:15 LOG1 fixed_driftmap: New position: year = 2008.7691236025555 RA = 22:45:09.7 RA/Dec = 22:45:38.1 +04:11:09.1 2008-Oct-06 22:08:15 NOTE fixed_driftmap: Correcting ZA to 14:10:04.6 ... 2008-Oct-06 22:08:15 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.1679352596 -CF 2008-Oct-06 22:08:15 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-06 22:08:15 START begin_task: Starting task 'WAPP calibration' 2008-Oct-06 22:08:15 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-06 22:08:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-06 22:08:15 START begin_task: Starting task 'selecting calibration type' 2008-Oct-06 22:08:15 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-06 22:08:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-06 22:08:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-06 22:08:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 22:08:15 START begin_task: Starting task 'waiting on setcal' 2008-Oct-06 22:08:15 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-06 22:08:15 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.1679352596 -CF 2008-Oct-06 22:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 22:08:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-06 22:08:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 22:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 22:08:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-06 22:08:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-06 22:08:15 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2008-Oct-06 22:08:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-06 22:08:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 22:08:16 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-06 22:08:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 22:08:16 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-06 22:08:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 22:08:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 22:08:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 22:08:16 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Oct-06 22:08:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 22:08:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-06 22:08:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 22:08:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-06 22:08:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 22:08:16 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-06 22:08:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:08:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 0.939 0.979 0.944 2008-Oct-06 22:08:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 1.000 0.908 1.066 2008-Oct-06 22:08:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 1.122 0.902 0.907 2008-Oct-06 22:08:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.090 1.126 0.100 2008-Oct-06 22:08:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 22:08:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 22:08:16 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Oct-06 22:08:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 22:08:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-06 22:08:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-06 22:08:16 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2008-Oct-06 22:08:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-06 22:08:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-06 22:08:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-06 22:08:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 22:08:16 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-06 22:08:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 22:08:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-06 22:08:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 22:08:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 22:08:16 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Oct-06 22:08:16 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-06 22:08:16 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-06 22:08:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-06 22:08:16 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-06 22:08:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-06 22:08:16 INFO2 take_data: Starting WAPP scan: 828000283 2008-Oct-06 22:08:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-06 22:08:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-06 22:08:16 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-06 22:08:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 22:08:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7697.00 2008-Oct-06 22:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 22:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 22:08:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-06 22:08:18 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-Oct-06 22:08:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-06 22:08:18 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Oct-06 22:08:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-06 22:08:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-06 22:08:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-06 22:08:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 22:08:18 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-06 22:08:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 22:08:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-06 22:08:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 22:08:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 22:08:18 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Oct-06 22:08:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-06 22:08:18 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-06 22:08:18 LOG5 finish_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-06 22:08:18 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-06 22:08:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 22:08:18 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-06 22:08:18 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2008-Oct-06 22:08:18 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Oct-06 22:08:18 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Oct-06 22:08:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-06 22:08:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-06 22:08:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-06 22:08:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-06 22:08:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-06 22:08:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-06 22:08:19 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-06 22:08:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-06 22:08:19 LOG5 begin_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-06 22:08:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-06 22:08:19 INFO2 take_data: Starting WAPP scan: 828000284 2008-Oct-06 22:08:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-06 22:08:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-06 22:08:19 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-06 22:08:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-06 22:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.556 (still bad) 2008-Oct-06 22:08:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 22:08:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7700.00 2008-Oct-06 22:08:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20081006.a2010.0019.fits 2008-Oct-06 22:08:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081006.a2010.0019.fits} 2008-Oct-06 22:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 22:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.556 (still bad) 2008-Oct-06 22:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:09:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:09:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 0.935 0.980 0.944 2008-Oct-06 22:09:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.999 0.910 1.066 2008-Oct-06 22:09:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 1.115 0.899 0.904 2008-Oct-06 22:09:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.090 1.117 0.100 2008-Oct-06 22:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:10:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:10:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 0.939 0.980 0.946 2008-Oct-06 22:10:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 0.997 0.910 1.064 2008-Oct-06 22:10:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 1.121 0.901 0.905 2008-Oct-06 22:10:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.090 1.118 0.100 2008-Oct-06 22:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:11:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:11:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 0.940 0.979 0.946 2008-Oct-06 22:11:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.999 0.910 1.065 2008-Oct-06 22:11:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 1.115 0.899 0.908 2008-Oct-06 22:11:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.090 1.117 0.100 2008-Oct-06 22:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:12:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:12:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 0.941 0.983 0.950 2008-Oct-06 22:12:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 1.002 0.912 1.065 2008-Oct-06 22:12:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 1.121 0.903 0.907 2008-Oct-06 22:12:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.013 0.090 1.122 0.101 2008-Oct-06 22:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:13:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:13:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 0.939 0.980 0.946 2008-Oct-06 22:13:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.999 0.912 1.065 2008-Oct-06 22:13:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 1.109 0.901 0.907 2008-Oct-06 22:13:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.090 1.123 0.100 2008-Oct-06 22:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:14:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:14:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 0.942 0.979 0.949 2008-Oct-06 22:14:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 1.001 0.909 1.066 2008-Oct-06 22:14:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 1.113 0.903 0.908 2008-Oct-06 22:14:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.090 1.120 0.101 2008-Oct-06 22:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:15:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:15:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 0.939 0.977 0.944 2008-Oct-06 22:15:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 1.000 0.911 1.064 2008-Oct-06 22:15:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 1.109 0.898 0.905 2008-Oct-06 22:15:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 0.090 1.120 0.101 2008-Oct-06 22:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-06 22:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:16:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:16:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 0.942 0.980 0.946 2008-Oct-06 22:16:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 1.000 0.912 1.065 2008-Oct-06 22:16:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 1.113 0.917 0.924 2008-Oct-06 22:16:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.090 1.123 0.101 2008-Oct-06 22:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.136 (still bad) 2008-Oct-06 22:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.148 (still bad) 2008-Oct-06 22:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.160 (still bad) 2008-Oct-06 22:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.165 (still bad) 2008-Oct-06 22:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.166 (still bad) 2008-Oct-06 22:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.164 (still bad) 2008-Oct-06 22:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.154 (still bad) 2008-Oct-06 22:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.144 (still bad) 2008-Oct-06 22:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.139 (still bad) 2008-Oct-06 22:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:17:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:17:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.123 0.943 0.980 0.950 2008-Oct-06 22:17:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 1.004 0.911 1.065 2008-Oct-06 22:17:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 1.106 0.901 0.906 2008-Oct-06 22:17:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.090 1.125 0.101 2008-Oct-06 22:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.119 (still bad) 2008-Oct-06 22:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:18:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 22:18:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-06 22:18:20 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2008-Oct-06 22:18:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-06 22:18:20 LOG5 end_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2008-Oct-06 22:18:20 LOG1 fixed_driftmap: New position: year = 2008.7691427738487 RA = 22:55:16.3 RA/Dec = 22:55:44.7 +04:11:11.8 2008-Oct-06 22:18:20 NOTE fixed_driftmap: Correcting ZA to 14:10:01.9 ... 2008-Oct-06 22:18:20 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.1672072614 -CF 2008-Oct-06 22:18:20 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-06 22:18:20 START begin_task: Starting task 'WAPP calibration' 2008-Oct-06 22:18:20 LOG5 begin_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-06 22:18:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-06 22:18:20 START begin_task: Starting task 'selecting calibration type' 2008-Oct-06 22:18:20 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-06 22:18:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-06 22:18:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-06 22:18:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 22:18:20 START begin_task: Starting task 'waiting on setcal' 2008-Oct-06 22:18:20 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2008-Oct-06 22:18:20 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.1672072614 -CF 2008-Oct-06 22:18:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 22:18:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-06 22:18:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 22:18:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 22:18:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-06 22:18:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-06 22:18:20 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2008-Oct-06 22:18:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-06 22:18:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 22:18:20 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-06 22:18:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 22:18:20 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-06 22:18:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 22:18:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 22:18:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 22:18:21 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Oct-06 22:18:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 22:18:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-06 22:18:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 22:18:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-06 22:18:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 22:18:21 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-06 22:18:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 22:18:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 22:18:21 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Oct-06 22:18:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 22:18:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-06 22:18:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-06 22:18:21 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2008-Oct-06 22:18:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-06 22:18:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-06 22:18:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-06 22:18:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 22:18:21 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-06 22:18:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 22:18:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-06 22:18:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 22:18:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 22:18:21 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Oct-06 22:18:21 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-06 22:18:21 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-06 22:18:21 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-06 22:18:21 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-06 22:18:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-06 22:18:21 INFO2 take_data: Starting WAPP scan: 828000285 2008-Oct-06 22:18:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-06 22:18:21 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-06 22:18:21 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-06 22:18:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 22:18:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8302.00 2008-Oct-06 22:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 22:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:23 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:23 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 22:18:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-06 22:18:23 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-Oct-06 22:18:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-06 22:18:23 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Oct-06 22:18:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-06 22:18:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-06 22:18:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-06 22:18:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 22:18:23 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-06 22:18:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 22:18:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-06 22:18:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 22:18:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 22:18:24 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Oct-06 22:18:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-06 22:18:24 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-06 22:18:24 LOG5 finish_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-06 22:18:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-06 22:18:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 22:18:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-06 22:18:24 LOG5 end_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2008-Oct-06 22:18:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Oct-06 22:18:24 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Oct-06 22:18:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-06 22:18:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-06 22:18:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-06 22:18:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-06 22:18:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-06 22:18:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-06 22:18:24 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-06 22:18:24 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-06 22:18:24 LOG5 begin_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-06 22:18:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-06 22:18:24 INFO2 take_data: Starting WAPP scan: 828000286 2008-Oct-06 22:18:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-06 22:18:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-06 22:18:24 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-Oct-06 22:18:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-06 22:18:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 22:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.561 (still bad) 2008-Oct-06 22:18:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8305.00 2008-Oct-06 22:18:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20081006.a2010.0020.fits 2008-Oct-06 22:18:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081006.a2010.0020.fits} 2008-Oct-06 22:18:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 22:18:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.561 (still bad) 2008-Oct-06 22:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:18:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:18:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 0.939 0.983 0.952 2008-Oct-06 22:18:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.998 0.909 1.064 2008-Oct-06 22:18:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 1.110 0.903 0.907 2008-Oct-06 22:18:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.013 0.090 1.124 0.101 2008-Oct-06 22:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.131 (still bad) 2008-Oct-06 22:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.131 (still bad) 2008-Oct-06 22:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.130 (still bad) 2008-Oct-06 22:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:19:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:19:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 0.940 0.980 0.947 2008-Oct-06 22:19:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 1.000 0.910 1.064 2008-Oct-06 22:19:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 1.110 0.897 0.906 2008-Oct-06 22:19:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.090 1.130 0.100 2008-Oct-06 22:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.133 (still bad) 2008-Oct-06 22:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.142 (still bad) 2008-Oct-06 22:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.150 (still bad) 2008-Oct-06 22:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.157 (still bad) 2008-Oct-06 22:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.162 (still bad) 2008-Oct-06 22:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.160 (still bad) 2008-Oct-06 22:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.154 (still bad) 2008-Oct-06 22:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.146 (still bad) 2008-Oct-06 22:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.139 (still bad) 2008-Oct-06 22:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.131 (still bad) 2008-Oct-06 22:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:20:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:20:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 0.939 0.978 0.947 2008-Oct-06 22:20:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 1.004 0.911 1.065 2008-Oct-06 22:20:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 1.109 0.898 0.907 2008-Oct-06 22:20:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.013 0.090 1.121 0.101 2008-Oct-06 22:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.123 (still bad) 2008-Oct-06 22:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:21:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:21:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.123 0.939 0.981 0.948 2008-Oct-06 22:21:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 1.000 0.910 1.065 2008-Oct-06 22:21:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 1.109 0.897 0.906 2008-Oct-06 22:21:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.090 1.120 0.100 2008-Oct-06 22:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.121 (still bad) 2008-Oct-06 22:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:22:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.091 < 0.75)! 2008-Oct-06 22:22:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.125 0.944 0.984 0.952 2008-Oct-06 22:22:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.028 1.003 0.913 1.069 2008-Oct-06 22:22:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 1.117 0.903 0.909 2008-Oct-06 22:22:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.091 1.130 0.101 2008-Oct-06 22:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.131 (still bad) 2008-Oct-06 22:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.130 (still bad) 2008-Oct-06 22:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:23:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:23:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.129 0.945 0.985 0.953 2008-Oct-06 22:23:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 1.005 0.914 1.068 2008-Oct-06 22:23:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 1.119 0.903 0.911 2008-Oct-06 22:23:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.090 1.123 0.100 2008-Oct-06 22:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.131 (still bad) 2008-Oct-06 22:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.130 (still bad) 2008-Oct-06 22:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:24:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:24:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 0.940 0.981 0.950 2008-Oct-06 22:24:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 1.002 0.908 1.066 2008-Oct-06 22:24:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 1.115 0.899 0.907 2008-Oct-06 22:24:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.090 1.124 0.101 2008-Oct-06 22:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:25:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:25:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 0.940 0.978 0.950 2008-Oct-06 22:25:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 1.001 0.911 1.065 2008-Oct-06 22:25:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 1.115 0.900 0.907 2008-Oct-06 22:25:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.090 1.122 0.100 2008-Oct-06 22:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.120 (still bad) 2008-Oct-06 22:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.131 (still bad) 2008-Oct-06 22:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.138 (still bad) 2008-Oct-06 22:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.132 (still bad) 2008-Oct-06 22:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.130 (still bad) 2008-Oct-06 22:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.132 (still bad) 2008-Oct-06 22:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.121 (still bad) 2008-Oct-06 22:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:26:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:26:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 0.942 0.982 0.950 2008-Oct-06 22:26:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 1.001 0.911 1.066 2008-Oct-06 22:26:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 1.111 0.899 0.906 2008-Oct-06 22:26:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.090 1.126 0.101 2008-Oct-06 22:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.130 (still bad) 2008-Oct-06 22:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.130 (still bad) 2008-Oct-06 22:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.135 (still bad) 2008-Oct-06 22:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.130 (still bad) 2008-Oct-06 22:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.131 (still bad) 2008-Oct-06 22:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.122 (still bad) 2008-Oct-06 22:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:27:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:27:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.124 0.940 0.983 0.952 2008-Oct-06 22:27:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 1.001 0.912 1.065 2008-Oct-06 22:27:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 1.110 0.901 0.906 2008-Oct-06 22:27:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.090 1.124 0.101 2008-Oct-06 22:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.123 (still bad) 2008-Oct-06 22:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.123 (still bad) 2008-Oct-06 22:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:28:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 22:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:28:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-06 22:28:25 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-Oct-06 22:28:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-06 22:28:25 LOG5 end_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2008-Oct-06 22:28:25 LOG1 fixed_driftmap: New position: year = 2008.7691619451416 RA = 23:05:22.9 RA/Dec = 23:05:51.4 +04:11:14.0 2008-Oct-06 22:28:25 NOTE fixed_driftmap: Correcting ZA to 14:09:59.7 ... 2008-Oct-06 22:28:25 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.1665721962 -CF 2008-Oct-06 22:28:25 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Oct-06 22:28:25 START begin_task: Starting task 'WAPP calibration' 2008-Oct-06 22:28:25 LOG5 begin_task: Level: (2) ID = <10171> Status = 0 0 0 0 ok 2008-Oct-06 22:28:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Oct-06 22:28:25 START begin_task: Starting task 'selecting calibration type' 2008-Oct-06 22:28:25 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-06 22:28:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-06 22:28:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-06 22:28:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 22:28:25 START begin_task: Starting task 'waiting on setcal' 2008-Oct-06 22:28:25 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-06 22:28:25 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.1665721962 -CF 2008-Oct-06 22:28:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 22:28:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-06 22:28:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-06 22:28:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 22:28:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-06 22:28:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-06 22:28:26 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Oct-06 22:28:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-06 22:28:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 22:28:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-06 22:28:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 22:28:26 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-06 22:28:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-06 22:28:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 22:28:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 22:28:26 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Oct-06 22:28:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 22:28:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-06 22:28:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-06 22:28:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-06 22:28:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-06 22:28:26 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-06 22:28:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-06 22:28:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-06 22:28:26 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Oct-06 22:28:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-06 22:28:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-06 22:28:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-06 22:28:26 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Oct-06 22:28:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Oct-06 22:28:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-06 22:28:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-06 22:28:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 22:28:26 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-06 22:28:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 22:28:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-06 22:28:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 22:28:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 22:28:26 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2008-Oct-06 22:28:26 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Oct-06 22:28:26 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Oct-06 22:28:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-06 22:28:26 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-06 22:28:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-06 22:28:26 INFO2 take_data: Starting WAPP scan: 828000287 2008-Oct-06 22:28:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Oct-06 22:28:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-06 22:28:27 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-06 22:28:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 22:28:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8908.00 2008-Oct-06 22:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 22:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-06 22:28:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Oct-06 22:28:29 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Oct-06 22:28:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Oct-06 22:28:29 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Oct-06 22:28:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Oct-06 22:28:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-06 22:28:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-06 22:28:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-06 22:28:29 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-06 22:28:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-06 22:28:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-06 22:28:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-06 22:28:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-06 22:28:29 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Oct-06 22:28:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-06 22:28:29 STOP finish_task: Finishing task 'WAPP calibration' 2008-Oct-06 22:28:29 LOG5 finish_task: Level: (2) ID = <10171> Status = 0 0 0 0 ok 2008-Oct-06 22:28:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Oct-06 22:28:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-06 22:28:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Oct-06 22:28:29 LOG5 end_task: Level: (2) ID = <10171> Status = 0 0 0 0 ok 2008-Oct-06 22:28:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Oct-06 22:28:30 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Oct-06 22:28:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-06 22:28:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-06 22:28:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-06 22:28:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-06 22:28:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Oct-06 22:28:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Oct-06 22:28:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Oct-06 22:28:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Oct-06 22:28:30 LOG5 begin_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2008-Oct-06 22:28:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Oct-06 22:28:30 INFO2 take_data: Starting WAPP scan: 828000288 2008-Oct-06 22:28:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Oct-06 22:28:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Oct-06 22:28:30 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2008-Oct-06 22:28:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-06 22:28:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-06 22:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.563 (still bad) 2008-Oct-06 22:28:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8911.00 2008-Oct-06 22:28:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20081006.a2010.0021.fits 2008-Oct-06 22:28:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20081006.a2010.0021.fits} 2008-Oct-06 22:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-06 22:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Oct-06 22:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.563 (still bad) 2008-Oct-06 22:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.135 (still bad) 2008-Oct-06 22:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.133 (still bad) 2008-Oct-06 22:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.136 (still bad) 2008-Oct-06 22:28:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:28:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.126 0.941 0.984 0.952 2008-Oct-06 22:28:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 1.001 0.913 1.067 2008-Oct-06 22:28:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 1.114 0.902 0.907 2008-Oct-06 22:28:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.090 1.141 0.101 2008-Oct-06 22:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.138 (still bad) 2008-Oct-06 22:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.139 (still bad) 2008-Oct-06 22:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.137 (still bad) 2008-Oct-06 22:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.131 (still bad) 2008-Oct-06 22:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:29:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.091 < 0.75)! 2008-Oct-06 22:29:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.127 0.941 0.985 0.953 2008-Oct-06 22:29:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 1.006 0.913 1.070 2008-Oct-06 22:29:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 1.118 0.910 0.916 2008-Oct-06 22:29:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.091 1.126 0.101 2008-Oct-06 22:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.129 (still bad) 2008-Oct-06 22:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.131 (still bad) 2008-Oct-06 22:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.129 (still bad) 2008-Oct-06 22:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.132 (still bad) 2008-Oct-06 22:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.146 (still bad) 2008-Oct-06 22:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.169 (still bad) 2008-Oct-06 22:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.212 (still bad) 2008-Oct-06 22:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.235 (still bad) 2008-Oct-06 22:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.245 (still bad) 2008-Oct-06 22:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.237 (still bad) 2008-Oct-06 22:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.217 (still bad) 2008-Oct-06 22:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.190 (still bad) 2008-Oct-06 22:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.158 (still bad) 2008-Oct-06 22:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.136 (still bad) 2008-Oct-06 22:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:30:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:30:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.126 0.947 0.986 0.953 2008-Oct-06 22:30:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 1.005 0.945 1.109 2008-Oct-06 22:30:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 1.121 0.902 0.911 2008-Oct-06 22:30:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.090 1.124 0.101 2008-Oct-06 22:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.134 (still bad) 2008-Oct-06 22:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.134 (still bad) 2008-Oct-06 22:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.132 (still bad) 2008-Oct-06 22:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.132 (still bad) 2008-Oct-06 22:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.130 (still bad) 2008-Oct-06 22:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.128 (still bad) 2008-Oct-06 22:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-06 22:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.123 (still bad) 2008-Oct-06 22:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:31:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:31:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 0.944 0.983 0.950 2008-Oct-06 22:31:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 1.003 0.909 1.069 2008-Oct-06 22:31:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 1.119 0.902 0.909 2008-Oct-06 22:31:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.090 1.123 0.101 2008-Oct-06 22:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-06 22:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.131 (still bad) 2008-Oct-06 22:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.130 (still bad) 2008-Oct-06 22:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.126 (still bad) 2008-Oct-06 22:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.131 (still bad) 2008-Oct-06 22:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:32:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:32:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.125 0.944 0.983 0.951 2008-Oct-06 22:32:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 1.007 0.913 1.069 2008-Oct-06 22:32:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 1.116 0.905 0.911 2008-Oct-06 22:32:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.090 1.125 0.101 2008-Oct-06 22:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.131 (still bad) 2008-Oct-06 22:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.131 (still bad) 2008-Oct-06 22:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.130 (still bad) 2008-Oct-06 22:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.130 (still bad) 2008-Oct-06 22:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.131 (still bad) 2008-Oct-06 22:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:33:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-06 22:33:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.129 0.945 0.984 0.956 2008-Oct-06 22:33:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 1.006 0.913 1.071 2008-Oct-06 22:33:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 1.115 0.906 0.911 2008-Oct-06 22:33:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.090 1.125 0.101 2008-Oct-06 22:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.129 (still bad) 2008-Oct-06 22:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.131 (still bad) 2008-Oct-06 22:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-06 22:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.131 (still bad) 2008-Oct-06 22:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.128 (still bad) 2008-Oct-06 22:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.130 (still bad) 2008-Oct-06 22:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.130 (still bad) 2008-Oct-06 22:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.129 (still bad) 2008-Oct-06 22:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.133 (still bad) 2008-Oct-06 22:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.129 (still bad) 2008-Oct-06 22:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.132 (still bad) 2008-Oct-06 22:34:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.091 < 0.75)! 2008-Oct-06 22:34:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.127 0.948 0.985 0.957 2008-Oct-06 22:34:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 1.010 0.913 1.072 2008-Oct-06 22:34:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 1.114 0.905 0.911 2008-Oct-06 22:34:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.091 1.124 0.101 2008-Oct-06 22:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.132 (still bad) 2008-Oct-06 22:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-06 22:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.130 (still bad) 2008-Oct-06 22:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.124 (still bad) 2008-Oct-06 22:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.127 (still bad) 2008-Oct-06 22:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.125 (still bad) 2008-Oct-06 22:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.131 (still bad) 2008-Oct-06 22:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad) 2008-Oct-06 22:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.126 (still bad