2008-Oct-05 21:29:39 BEGIN executive: CIMA executive starting ... 2008-Oct-05 21:29:39 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-05 21:29:39 INFO1 executive: Using CIMA version 3.0.04 'next' from 2008-09-30 18:33 2008-Oct-05 21:29:39 INFO4 executive: This is an ON-LINE session 2008-Oct-05 21:29:39 INFO4 executive: This is a REMOTE session 2008-Oct-05 21:29:39 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-05 21:29:39 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Ann Martin' 2008-Oct-05 21:29:39 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081005' 2008-Oct-05 21:29:40 LOG2 log_preferences: Currently applied preferences: 2008-Oct-05 21:29:40 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-05 21:29:40 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-05 21:29:40 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-05 21:29:40 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-05 21:29:40 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-05 21:29:40 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-05 21:29:40 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-05 21:29:40 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-05 21:29:40 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-05 21:29:40 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-05 21:29:40 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-05 21:29:40 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-05 21:29:40 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-05 21:29:40 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-05 21:29:40 ALERT executive: CIMA executive ready 2008-Oct-05 21:29:42 NOTE frontend: CIMA frontend ready 2008-Oct-05 21:29:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:29:43 LOG4 got_cormsg: From DATATAKING: setup 2008-Oct-05 21:29:46 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-05 21:29:46 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-05 21:29:46 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-05 21:29:46 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-05 21:29:46 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-05 21:29:46 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-05 21:29:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-05 21:29:46 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-05 21:29:46 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-05 21:29:46 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-05 21:29:46 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-05 21:29:46 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-05 21:29:46 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-05 21:29:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-05 21:29:46 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-05 21:29:46 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Oct-05 21:29:49 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-05 21:29:49 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:29:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:29:52 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-05 21:29:53 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-05 21:29:53 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-05 21:29:53 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-05 21:29:53 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-05 21:29:53 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-05 21:29:53 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-05 21:29:53 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-05 21:29:53 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-05 21:29:53 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-05 21:29:56 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-05 21:29:56 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-05 21:29:56 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-05 21:29:56 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-05 21:29:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:29:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:06 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-05 21:30:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-05 21:30:08 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-05 21:30:08 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-05 21:30:08 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-05 21:30:08 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-05 21:30:08 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-05 21:30:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-05 21:30:08 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-05 21:30:08 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-05 21:30:08 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-05 21:30:08 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-05 21:30:08 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-05 21:30:08 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-05 21:30:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-05 21:30:08 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-05 21:30:08 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-05 21:30:09 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-05 21:30:09 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-05 21:30:09 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-05 21:30:09 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-05 21:30:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-05 21:30:09 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-05 21:30:09 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-05 21:30:09 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-05 21:30:09 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-05 21:30:09 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-05 21:30:09 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-05 21:30:09 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-05 21:30:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-05 21:30:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-05 21:30:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-05 21:30:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-05 21:30:09 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-05 21:30:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-05 21:30:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-05 21:30:09 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-05 21:30:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-05 21:30:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-05 21:30:09 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-05 21:30:09 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-05 21:30:09 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-05 21:30:09 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-05 21:30:09 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-05 21:30:09 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-05 21:30:09 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-05 21:30:09 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-05 21:30:09 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-05 21:30:09 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-05 21:30:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-05 21:30:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-05 21:30:09 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-05 21:30:09 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-05 21:30:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-05 21:30:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-05 21:30:25 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-05 21:30:25 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-05 21:30:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-05 21:30:25 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-05 21:30:25 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-05 21:30:25 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-05 21:30:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-05 21:30:25 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-05 21:30:25 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-05 21:30:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-05 21:30:26 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-05 21:30:26 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-05 21:30:26 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-05 21:30:26 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-05 21:30:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-05 21:30:26 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-05 21:30:26 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-05 21:30:26 START begin_task: Starting task 'selecting calibration port' 2008-Oct-05 21:30:26 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-05 21:30:26 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-05 21:30:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-05 21:30:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-05 21:30:26 START begin_task: Starting task 'waiting on calport' 2008-Oct-05 21:30:26 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-05 21:30:26 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-05 21:30:26 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-05 21:30:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-05 21:30:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-05 21:30:26 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-05 21:30:26 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-05 21:30:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-05 21:30:26 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-05 21:30:26 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-05 21:30:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-05 21:30:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-05 21:30:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-05 21:30:26 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-05 21:30:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-05 21:30:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-05 21:30:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-05 21:30:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-05 21:30:26 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-05 21:30:26 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-05 21:30:26 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-05 21:30:26 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-05 21:30:26 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-05 21:30:26 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-05 21:30:26 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-05 21:30:27 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-05 21:30:27 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-05 21:30:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-05 21:30:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-05 21:30:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-05 21:30:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-05 21:30:27 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-05 21:30:27 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-05 21:30:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-05 21:30:27 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-05 21:30:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-05 21:30:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-05 21:30:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-05 21:30:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-05 21:30:27 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-05 21:30:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-05 21:30:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-05 21:30:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-05 21:30:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-05 21:30:27 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-05 21:30:27 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-05 21:30:27 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-05 21:30:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-05 21:30:27 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-05 21:30:27 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-05 21:30:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-05 21:30:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-05 21:30:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-05 21:30:27 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-05 21:30:27 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-05 21:30:27 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-05 21:30:27 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-05 21:30:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-05 21:30:27 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-05 21:30:27 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-05 21:30:27 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-05 21:30:27 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-05 21:30:27 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-05 21:30:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-05 21:30:28 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-05 21:30:28 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-05 21:30:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-05 21:30:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20081005.a2010.0017.fits 2008-Oct-05 21:30:28 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081005.a2010.0017.fits} 2008-Oct-05 21:30:29 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-05 21:30:35 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-05 21:30:35 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-05 21:30:50 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-05 21:30:50 LOG4 exec_msg: From OBSERVER: track_new_source drift18p2 220500.0 +042248 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-05 21:30:50 LOG1 track_new_source: Calling 'track_new_source drift18p2 220500.0 +042248 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-05 21:30:50 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-05 21:30:50 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-05 21:30:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift18p2} INFO {Selecting source 'drift18p2' ...} 2008-Oct-05 21:30:50 LOG3 track_source: Calling 'track_source drift18p2 220500.0 +042248 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-05 21:30:50 START begin_task: Starting task 'sending tracking commands' 2008-Oct-05 21:30:50 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-05 21:30:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift18p2} INFO {Slewing to source 'drift18p2' ...} 2008-Oct-05 21:30:50 INFO1 track_source: Starting to track drift18p2 2008-Oct-05 21:30:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift18p2" 2008-Oct-05 21:30:50 LOG3 vw_send: To DATATAKING: set ra 220500.0 2008-Oct-05 21:30:50 LOG3 vw_send: To DATATAKING: set dec +042248 2008-Oct-05 21:30:50 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-05 21:30:50 LOG3 vw_send: To DATATAKING: pnt tr 220500.0 +042248 -CJ 2008-Oct-05 21:30:50 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-05 21:30:50 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-05 21:30:50 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-05 21:30:50 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-05 21:30:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-05 21:30:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-05 21:30:50 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-05 21:30:50 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-05 21:30:50 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-05 21:30:50 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-05 21:30:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-05 21:30:50 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-05 21:30:50 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-05 21:30:50 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-05 21:30:50 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-05 21:30:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-05 21:30:51 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-05 21:30:51 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-05 21:30:51 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-05 21:30:51 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-05 21:30:51 DONE finish_task: DONE finished selecting: new source 2008-Oct-05 21:30:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-05 21:30:51 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-05 21:30:51 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-05 21:30:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift18p2" 2008-Oct-05 21:30:51 LOG4 got_cormsg: From DATATAKING: set ra 220500.0 2008-Oct-05 21:30:51 LOG4 got_cormsg: From DATATAKING: set dec +042248 2008-Oct-05 21:30:51 LOG4 got_cormsg: From DATATAKING: vw% 220500.0 2008-Oct-05 21:30:51 LOG4 got_cormsg: From DATATAKING: vw% +042248 2008-Oct-05 21:30:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-05 21:30:51 LOG4 got_cormsg: From DATATAKING: pnt tr 220500.0 +042248 -CJ 2008-Oct-05 21:30:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-05 21:30:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-05 21:30:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:30:51 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-05 21:30:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:35:15 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Oct-05 21:35:15 LOG4 exec_msg: From OBSERVER: track_new_source drift18p2 221000.0 +042248 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Oct-05 21:35:15 LOG1 track_new_source: Calling 'track_new_source drift18p2 221000.0 +042248 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Oct-05 21:35:15 BEGIN begin_task: Starting task 'selecting new source' 2008-Oct-05 21:35:15 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-05 21:35:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift18p2} INFO {Selecting source 'drift18p2' ...} 2008-Oct-05 21:35:15 LOG3 track_source: Calling 'track_source drift18p2 221000.0 +042248 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-05 21:35:15 START begin_task: Starting task 'sending tracking commands' 2008-Oct-05 21:35:15 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-05 21:35:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift18p2} INFO {Slewing to source 'drift18p2' ...} 2008-Oct-05 21:35:15 INFO1 track_source: Starting to track drift18p2 2008-Oct-05 21:35:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift18p2" 2008-Oct-05 21:35:15 LOG3 vw_send: To DATATAKING: set ra 221000.0 2008-Oct-05 21:35:15 LOG3 vw_send: To DATATAKING: set dec +042248 2008-Oct-05 21:35:15 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-05 21:35:15 LOG3 vw_send: To DATATAKING: pnt tr 221000.0 +042248 -CJ 2008-Oct-05 21:35:15 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-05 21:35:15 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-05 21:35:15 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-05 21:35:15 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-05 21:35:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-05 21:35:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-05 21:35:15 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-05 21:35:15 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Oct-05 21:35:15 START begin_task: Starting task 'applying pointing corrections' 2008-Oct-05 21:35:15 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-05 21:35:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Oct-05 21:35:15 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-05 21:35:15 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Oct-05 21:35:15 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-05 21:35:15 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Oct-05 21:35:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-05 21:35:15 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Oct-05 21:35:15 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-05 21:35:15 STOP finish_task: Finishing task 'selecting new source' 2008-Oct-05 21:35:15 LOG5 finish_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-05 21:35:15 DONE finish_task: DONE finished selecting: new source 2008-Oct-05 21:35:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-05 21:35:15 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Oct-05 21:35:15 LOG5 end_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-05 21:35:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift18p2" 2008-Oct-05 21:35:15 LOG4 got_cormsg: From DATATAKING: set ra 221000.0 2008-Oct-05 21:35:15 LOG4 got_cormsg: From DATATAKING: set dec +042248 2008-Oct-05 21:35:15 LOG4 got_cormsg: From DATATAKING: vw% 221000.0 2008-Oct-05 21:35:15 LOG4 got_cormsg: From DATATAKING: vw% +042248 2008-Oct-05 21:35:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:35:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-05 21:35:16 LOG4 got_cormsg: From DATATAKING: pnt tr 221000.0 +042248 -CJ 2008-Oct-05 21:35:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-05 21:35:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-05 21:35:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:35:16 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Oct-05 21:35:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:38:34 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-05 21:38:51 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-05 21:38:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-05 21:38:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-05 21:38:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-05 21:38:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-05 21:38:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-05 21:38:52 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-05 21:38:52 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-05 21:38:52 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-05 21:38:52 LOG5 begin_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-05 21:38:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-05 21:38:52 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-05 21:38:52 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-05 21:38:52 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-05 21:38:52 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-05 21:38:52 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-05 21:38:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-05 21:38:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-05 21:38:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-05 21:38:54 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-05 21:38:54 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-05 21:38:54 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-05 21:38:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-05 21:38:54 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-05 21:38:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-05 21:38:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-05 21:38:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-05 21:38:54 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-05 21:38:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-05 21:38:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-05 21:38:54 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-05 21:38:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-05 21:38:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-05 21:38:54 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-05 21:38:54 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-05 21:38:54 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-05 21:38:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-05 21:38:54 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-05 21:38:54 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-05 21:38:54 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-05 21:38:54 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-05 21:38:54 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-05 21:38:54 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-05 21:38:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-05 21:38:54 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-05 21:38:54 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-05 21:38:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-05 21:38:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-05 21:38:54 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-05 21:38:54 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-05 21:38:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-05 21:38:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:38:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-05 21:38:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:38:54 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Oct-05 21:38:54 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-05 21:38:54 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-05 21:38:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-05 21:38:54 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-05 21:38:54 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-05 21:38:54 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-05 21:38:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-05 21:38:54 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-05 21:38:54 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-05 21:38:54 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-05 21:38:54 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-05 21:38:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-05 21:38:54 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-05 21:38:55 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-05 21:38:55 START begin_task: Starting task 'selecting calibration port' 2008-Oct-05 21:38:55 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-05 21:38:55 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-05 21:38:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-05 21:38:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-05 21:38:55 START begin_task: Starting task 'waiting on calport' 2008-Oct-05 21:38:55 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-05 21:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:38:55 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-05 21:38:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-05 21:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:38:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-05 21:38:55 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-05 21:38:55 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-05 21:38:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-05 21:38:55 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-05 21:38:55 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-05 21:38:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-05 21:38:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-05 21:38:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-05 21:38:55 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-05 21:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:38:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-05 21:38:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-05 21:38:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-05 21:38:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-05 21:38:55 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-05 21:38:55 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-05 21:38:55 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-05 21:38:55 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-05 21:38:55 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-05 21:38:55 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-05 21:38:55 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-05 21:38:55 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-05 21:38:55 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-05 21:38:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-05 21:38:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-05 21:38:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-05 21:38:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-05 21:38:55 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-05 21:38:55 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-05 21:38:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-05 21:38:55 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-05 21:38:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-05 21:38:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-05 21:38:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-05 21:38:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-05 21:38:55 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-05 21:38:55 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-05 21:38:55 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-05 21:38:55 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-05 21:38:55 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-05 21:38:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-05 21:38:55 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-05 21:38:55 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-05 21:38:56 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-05 21:38:56 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-05 21:38:56 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-05 21:38:56 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-05 21:38:56 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-05 21:38:56 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-05 21:38:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-05 21:38:56 LOG3 track_source: Calling 'track_source galfasrc 221300.0 +042248 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-05 21:38:56 START begin_task: Starting task 'sending tracking commands' 2008-Oct-05 21:38:56 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-05 21:38:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-05 21:38:56 INFO1 track_source: Starting to track galfasrc 2008-Oct-05 21:38:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-05 21:38:56 LOG3 vw_send: To DATATAKING: set ra 221300.0 2008-Oct-05 21:38:56 LOG3 vw_send: To DATATAKING: set dec +042248 2008-Oct-05 21:38:56 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-05 21:38:56 LOG3 vw_send: To DATATAKING: pnt tr 221300.0 +042248 -CJ 2008-Oct-05 21:38:56 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-05 21:38:56 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-05 21:38:56 LOG5 finish_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-05 21:38:56 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-05 21:38:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-05 21:38:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-05 21:38:56 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-05 21:38:56 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-05 21:38:56 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-05 21:38:56 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-05 21:38:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-05 21:38:56 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-05 21:38:56 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-05 21:38:56 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-05 21:38:56 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-05 21:38:56 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-05 21:38:56 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-05 21:38:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-05 21:38:56 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-05 21:38:56 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-05 21:38:56 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-05 21:38:56 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-05 21:38:56 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-05 21:38:56 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-05 21:38:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-05 21:38:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-05 21:38:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-05 21:38:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-05 21:38:56 LOG4 got_cormsg: From DATATAKING: set ra 221300.0 2008-Oct-05 21:38:56 LOG4 got_cormsg: From DATATAKING: set dec +042248 2008-Oct-05 21:38:56 LOG4 got_cormsg: From DATATAKING: vw% 221300.0 2008-Oct-05 21:38:56 LOG4 got_cormsg: From DATATAKING: vw% +042248 2008-Oct-05 21:38:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:38:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-05 21:38:56 LOG4 got_cormsg: From DATATAKING: pnt tr 221300.0 +042248 -CJ 2008-Oct-05 21:38:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-05 21:38:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-05 21:38:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:38:57 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-05 21:38:57 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-05 21:38:57 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-05 21:38:57 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-05 21:38:57 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-05 21:38:57 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-05 21:38:57 LOG5 finish_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-05 21:38:57 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-05 21:38:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-05 21:38:57 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-05 21:38:57 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-05 21:38:57 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-05 21:38:57 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-05 21:38:57 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-05 21:38:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-05 21:38:57 LOG3 waittrk: Start waittrk 5 2008-Oct-05 21:38:57 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-05 21:38:57 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-05 21:39:02 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-05 21:39:02 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-05 21:39:02 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-05 21:39:02 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-05 21:39:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-05 21:39:21 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-05 21:39:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-05 21:39:21 INFO2 waittrk: Now tracking galfasrc 2008-Oct-05 21:39:21 LOG4 waittrk: Current telescope position: Az = 358.84 ZA = 13.90 2008-Oct-05 21:39:21 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-05 21:39:21 LOG5 finish_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-05 21:39:21 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-05 21:39:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-05 21:39:21 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-05 21:39:21 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-05 21:39:21 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-05 21:39:21 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-05 21:39:21 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-05 21:39:21 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-05 21:39:21 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-05 21:39:21 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-05 21:39:21 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-05 21:39:21 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-05 21:39:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-05 21:39:21 START begin_task: Starting task 'selecting calibration type' 2008-Oct-05 21:39:21 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-05 21:39:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-05 21:39:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-05 21:39:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-05 21:39:21 START begin_task: Starting task 'waiting on setcal' 2008-Oct-05 21:39:21 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-05 21:39:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-05 21:39:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-05 21:39:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:39:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-05 21:39:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-05 21:39:22 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-05 21:39:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-05 21:39:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-05 21:39:22 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-05 21:39:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-05 21:39:22 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-05 21:39:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:39:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-05 21:39:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-05 21:39:22 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-05 21:39:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-05 21:39:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-05 21:39:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-05 21:39:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-05 21:39:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-05 21:39:22 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-05 21:39:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-05 21:39:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-05 21:39:22 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-05 21:39:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-05 21:39:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-05 21:39:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-05 21:39:23 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-05 21:39:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Oct-05 21:39:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Oct-05 21:39:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Oct-05 21:39:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Oct-05 21:39:23 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081005.a2010.0017.fits' is empty! 2008-Oct-05 21:39:23 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-05 21:39:23 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-05 21:39:23 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-05 21:39:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-05 21:39:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-05 21:39:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-05 21:39:23 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-05 21:39:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-05 21:39:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-05 21:39:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-05 21:39:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-05 21:39:23 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-05 21:39:23 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-05 21:39:23 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-05 21:39:23 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-05 21:39:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-05 21:39:23 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-05 21:39:23 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-05 21:39:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-05 21:39:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-05 21:39:23 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-05 21:39:23 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-05 21:39:23 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-05 21:39:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-05 21:39:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Oct-05 21:39:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:39:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-05 21:39:27 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-05 21:39:27 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-05 21:39:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-05 21:39:27 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-05 21:39:27 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-05 21:39:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-05 21:39:27 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-05 21:39:27 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-05 21:39:27 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-05 21:39:27 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-05 21:39:27 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-05 21:39:27 LOG5 begin_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-05 21:39:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-05 21:39:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:39:27 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Oct-05 21:39:27 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 4 5 dB 2008-Oct-05 21:39:27 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 2 dB 2008-Oct-05 21:39:27 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2008-Oct-05 21:39:27 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-05 21:39:27 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-05 21:39:27 LOG5 end_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-05 21:39:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.115 0.939 ALFA beam 1: 0.972 0.945 2008-Oct-05 21:39:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.047 0.983 ALFA beam 3: 0.889 1.036 2008-Oct-05 21:39:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.101 1.084 ALFA beam 5: 1.129 0.895 2008-Oct-05 21:39:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.005 0.088 ALFA beam 7: 0.894 0.098 2008-Oct-05 21:39:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-05 21:39:27 LOG5 finish_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-05 21:39:27 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-05 21:39:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-05 21:39:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-05 21:39:27 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-05 21:39:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-05 21:39:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-05 21:39:27 LOG5 finish_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-05 21:39:27 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-05 21:39:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-05 21:39:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-05 21:39:27 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-05 21:39:27 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-05 21:39:27 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-05 21:39:27 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-05 21:39:27 LOG5 antvel: Calling 'antvel 221300.000000 42248.000000 J 0' 2008-Oct-05 21:39:27 LOG2 antvel: Precessing RA = 22:13:00.0 Dec = +04:22:48.0 Epoch = 2008.76633 J 2008-Oct-05 21:39:27 LOG2 antvel: Computed apparent RA = 22:13:28.1 Dec = +04:25:34.7 2008-Oct-05 21:39:27 LOG2 antvel: Parameters to Doppler: Topocentric 92367 2008 279 0.0 2008-Oct-05 21:39:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-05 21:39:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-05 21:39:28 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-05 21:39:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-05 21:39:28 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-05 21:39:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-05 21:39:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:39:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-05 21:39:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-05 21:39:28 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-05 21:39:28 LOG5 log_alfabeam: Parameters: 22.216666666666665 4.3799999999999999 22.213372 2008.7663309947525 18.999933 2008-Oct-05 21:39:28 LOG4 log_alfabeam: ALFABEAM 0 22.216666666666310 4.380000000000007 2008-Oct-05 21:39:28 LOG4 log_alfabeam: ALFABEAM 1 22.215434585513410 4.484528707190464 2008-Oct-05 21:39:28 LOG4 log_alfabeam: ALFABEAM 2 22.210877429296563 4.414066401263834 2008-Oct-05 21:39:28 LOG4 log_alfabeam: ALFABEAM 3 22.212081838045908 4.309451578504421 2008-Oct-05 21:39:28 LOG4 log_alfabeam: ALFABEAM 4 22.217915568074087 4.275494966463711 2008-Oct-05 21:39:28 LOG4 log_alfabeam: ALFABEAM 5 22.222483244186826 4.346453547152427 2008-Oct-05 21:39:28 LOG4 log_alfabeam: ALFABEAM 6 22.221206699599275 4.450869799150737 2008-Oct-05 21:39:28 INFO2 take_data: Starting WAPP+GALFA scan: 827900061 2008-Oct-05 21:39:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-05 21:39:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-05 21:39:28 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-05 21:39:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-05 21:39:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-05 21:39:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:39:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:39:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:39:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5969.00 2008-Oct-05 21:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-05 21:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-05 21:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Oct-05 21:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Oct-05 21:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Oct-05 21:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Oct-05 21:39:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.088 < 0.75)! 2008-Oct-05 21:39:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.152 0.969 1.012 0.967 2008-Oct-05 21:39:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.983 0.889 1.036 2008-Oct-05 21:39:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.159 1.084 1.129 0.895 2008-Oct-05 21:39:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.088 0.894 0.098 2008-Oct-05 21:39:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:39:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.200 (still bad) 2008-Oct-05 21:39:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.201 (still bad) 2008-Oct-05 21:39:35 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.202 (still bad) 2008-Oct-05 21:39:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.197 (still bad) 2008-Oct-05 21:39:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:39:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:39:39 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:39:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-05 21:39:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-05 21:39:39 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-05 21:39:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-05 21:39:39 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-05 21:39:39 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-05 21:39:39 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-05 21:39:39 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-05 21:39:39 LOG5 antvel: Calling 'antvel 221300.000000 42248.000000 J 0' 2008-Oct-05 21:39:39 LOG2 antvel: Precessing RA = 22:13:00.0 Dec = +04:22:48.0 Epoch = 2008.76633 J 2008-Oct-05 21:39:39 LOG2 antvel: Computed apparent RA = 22:13:28.1 Dec = +04:25:34.7 2008-Oct-05 21:39:39 LOG2 antvel: Parameters to Doppler: Topocentric 92379 2008 279 0.0 2008-Oct-05 21:39:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-05 21:39:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-05 21:39:39 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-05 21:39:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-05 21:39:39 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-05 21:39:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-05 21:39:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:39:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-05 21:39:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-05 21:39:39 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-05 21:39:39 LOG5 log_alfabeam: Parameters: 22.216666666666665 4.3799999999999999 22.216714 2008.7663313750095 18.999933 2008-Oct-05 21:39:39 LOG4 log_alfabeam: ALFABEAM 0 22.216666666666566 4.380000000000003 2008-Oct-05 21:39:39 LOG4 log_alfabeam: ALFABEAM 1 22.215458702563449 4.484591644042362 2008-Oct-05 21:39:39 LOG4 log_alfabeam: ALFABEAM 2 22.210885319702438 4.414364852073134 2008-Oct-05 21:39:39 LOG4 log_alfabeam: ALFABEAM 3 22.212065595681921 4.309688517468521 2008-Oct-05 21:39:39 LOG4 log_alfabeam: ALFABEAM 4 22.217891463614698 4.275431162414010 2008-Oct-05 21:39:39 LOG4 log_alfabeam: ALFABEAM 5 22.222475472887556 4.346153701248853 2008-Oct-05 21:39:39 LOG4 log_alfabeam: ALFABEAM 6 22.221223016396738 4.450635180508923 2008-Oct-05 21:39:39 INFO2 take_data: Starting WAPP+GALFA scan: 827900062 2008-Oct-05 21:39:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-05 21:39:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-05 21:39:40 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-05 21:39:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-05 21:39:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-05 21:39:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:39:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:39:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.199 (still bad) 2008-Oct-05 21:39:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5981.00 2008-Oct-05 21:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-05 21:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-05 21:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Oct-05 21:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Oct-05 21:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Oct-05 21:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Oct-05 21:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.181 (still bad) 2008-Oct-05 21:39:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:39:42 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:39:43 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.176 (still bad) 2008-Oct-05 21:39:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:39:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:39:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:39:46 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.178 (still bad) 2008-Oct-05 21:39:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:39:47 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.178 (still bad) 2008-Oct-05 21:39:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:39:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:39:49 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.176 (still bad) 2008-Oct-05 21:39:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:39:50 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:39:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-05 21:39:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-05 21:39:51 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-05 21:39:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-05 21:39:51 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-05 21:39:51 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-05 21:39:51 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-05 21:39:51 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-05 21:39:51 LOG5 antvel: Calling 'antvel 221300.000000 42248.000000 J 0' 2008-Oct-05 21:39:51 LOG2 antvel: Precessing RA = 22:13:00.0 Dec = +04:22:48.0 Epoch = 2008.76633 J 2008-Oct-05 21:39:51 LOG2 antvel: Computed apparent RA = 22:13:28.1 Dec = +04:25:34.7 2008-Oct-05 21:39:51 LOG2 antvel: Parameters to Doppler: Topocentric 92391 2008 279 0.0 2008-Oct-05 21:39:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-05 21:39:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-05 21:39:51 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-05 21:39:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-05 21:39:51 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-05 21:39:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-05 21:39:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:39:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-05 21:39:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-05 21:39:51 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-05 21:39:51 LOG5 log_alfabeam: Parameters: 22.216666666666665 4.3799999999999999 22.220057 2008.7663317552665 18.999933 2008-Oct-05 21:39:51 LOG4 log_alfabeam: ALFABEAM 0 22.216666666666384 4.380000000000003 2008-Oct-05 21:39:51 LOG4 log_alfabeam: ALFABEAM 1 22.215482842440036 4.484653357914241 2008-Oct-05 21:39:51 LOG4 log_alfabeam: ALFABEAM 2 22.210893281557805 4.414662996290231 2008-Oct-05 21:39:51 LOG4 log_alfabeam: ALFABEAM 3 22.212049402607661 4.309926375254689 2008-Oct-05 21:39:51 LOG4 log_alfabeam: ALFABEAM 4 22.217867335923799 4.275368580072973 2008-Oct-05 21:39:51 LOG4 log_alfabeam: ALFABEAM 5 22.222467629523923 4.345854148461722 2008-Oct-05 21:39:51 LOG4 log_alfabeam: ALFABEAM 6 22.221239285027288 4.450399635813537 2008-Oct-05 21:39:51 INFO2 take_data: Starting WAPP+GALFA scan: 827900063 2008-Oct-05 21:39:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-05 21:39:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-05 21:39:52 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-05 21:39:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:39:52 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:39:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-05 21:39:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-05 21:39:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:39:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:39:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:39:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5993.00 2008-Oct-05 21:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.178 (still bad) 2008-Oct-05 21:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-05 21:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-05 21:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Oct-05 21:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Oct-05 21:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Oct-05 21:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Oct-05 21:39:54 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.172 (still bad) 2008-Oct-05 21:39:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:39:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:39:55 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:39:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:39:56 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.174 (still bad) 2008-Oct-05 21:39:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:39:57 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:39:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:39:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:39:58 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.174 (still bad) 2008-Oct-05 21:39:59 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:00 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:01 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.176 (still bad) 2008-Oct-05 21:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.174 (still bad) 2008-Oct-05 21:40:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-05 21:40:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-05 21:40:03 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-05 21:40:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-05 21:40:03 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-05 21:40:03 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-05 21:40:03 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-05 21:40:03 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-05 21:40:03 LOG5 antvel: Calling 'antvel 221300.000000 42248.000000 J 0' 2008-Oct-05 21:40:03 LOG2 antvel: Precessing RA = 22:13:00.0 Dec = +04:22:48.0 Epoch = 2008.76633 J 2008-Oct-05 21:40:03 LOG2 antvel: Computed apparent RA = 22:13:28.1 Dec = +04:25:34.7 2008-Oct-05 21:40:03 LOG2 antvel: Parameters to Doppler: Topocentric 92403 2008 279 0.0 2008-Oct-05 21:40:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-05 21:40:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-05 21:40:03 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-05 21:40:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-05 21:40:03 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-05 21:40:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-05 21:40:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:40:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-05 21:40:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-05 21:40:03 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-05 21:40:03 LOG5 log_alfabeam: Parameters: 22.216666666666665 4.3799999999999999 22.223399 2008.7663321355235 18.999933 2008-Oct-05 21:40:03 LOG4 log_alfabeam: ALFABEAM 0 22.216666666661659 4.380000000000028 2008-Oct-05 21:40:03 LOG4 log_alfabeam: ALFABEAM 1 22.215506989804471 4.484713809449103 2008-Oct-05 21:40:03 LOG4 log_alfabeam: ALFABEAM 2 22.210901309802878 4.414960644443505 2008-Oct-05 21:40:03 LOG4 log_alfabeam: ALFABEAM 3 22.212033269106456 4.310165000786231 2008-Oct-05 21:40:03 LOG4 log_alfabeam: ALFABEAM 4 22.217843200328502 4.275307259382937 2008-Oct-05 21:40:03 LOG4 log_alfabeam: ALFABEAM 5 22.222459719066691 4.345555079210621 2008-Oct-05 21:40:03 LOG4 log_alfabeam: ALFABEAM 6 22.221255495143939 4.450163314581042 2008-Oct-05 21:40:03 INFO2 take_data: Starting WAPP+GALFA scan: 827900064 2008-Oct-05 21:40:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-05 21:40:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-05 21:40:04 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-05 21:40:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:40:04 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:40:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-05 21:40:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-05 21:40:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:40:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:40:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:40:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6005.00 2008-Oct-05 21:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.174 (still bad) 2008-Oct-05 21:40:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-05 21:40:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:40:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:40:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-05 21:40:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:40:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Oct-05 21:40:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Oct-05 21:40:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Oct-05 21:40:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Oct-05 21:40:06 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.158 (still bad) 2008-Oct-05 21:40:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:40:08 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.159 (still bad) 2008-Oct-05 21:40:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:10 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:11 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.155 (still bad) 2008-Oct-05 21:40:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:12 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.157 (still bad) 2008-Oct-05 21:40:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:14 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:40:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-05 21:40:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:15 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:40:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-05 21:40:15 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-05 21:40:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-05 21:40:15 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-05 21:40:15 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-05 21:40:15 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-05 21:40:15 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-05 21:40:15 LOG5 antvel: Calling 'antvel 221300.000000 42248.000000 J 0' 2008-Oct-05 21:40:15 LOG2 antvel: Precessing RA = 22:13:00.0 Dec = +04:22:48.0 Epoch = 2008.76633 J 2008-Oct-05 21:40:15 LOG2 antvel: Computed apparent RA = 22:13:28.1 Dec = +04:25:34.7 2008-Oct-05 21:40:15 LOG2 antvel: Parameters to Doppler: Topocentric 92415 2008 279 0.0 2008-Oct-05 21:40:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-05 21:40:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-05 21:40:15 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-05 21:40:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-05 21:40:15 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-05 21:40:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-05 21:40:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:40:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-05 21:40:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-05 21:40:15 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-05 21:40:15 LOG5 log_alfabeam: Parameters: 22.216666666666665 4.3799999999999999 22.226742 2008.7663325157805 18.999933 2008-Oct-05 21:40:15 LOG4 log_alfabeam: ALFABEAM 0 22.216666666667049 4.380000000000003 2008-Oct-05 21:40:15 LOG4 log_alfabeam: ALFABEAM 1 22.215531158216287 4.484773032527362 2008-Oct-05 21:40:15 LOG4 log_alfabeam: ALFABEAM 2 22.210909408949490 4.415257963596700 2008-Oct-05 21:40:15 LOG4 log_alfabeam: ALFABEAM 3 22.212017186139192 4.310404527993145 2008-Oct-05 21:40:15 LOG4 log_alfabeam: ALFABEAM 4 22.217819043288653 4.275247166009208 2008-Oct-05 21:40:15 LOG4 log_alfabeam: ALFABEAM 5 22.222451737074305 4.345256325688531 2008-Oct-05 21:40:15 LOG4 log_alfabeam: ALFABEAM 6 22.221271655843356 4.449926084085067 2008-Oct-05 21:40:15 INFO2 take_data: Starting WAPP+GALFA scan: 827900065 2008-Oct-05 21:40:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-05 21:40:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-05 21:40:16 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-05 21:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.155 (still bad) 2008-Oct-05 21:40:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-05 21:40:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-05 21:40:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:40:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:40:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:40:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6017.00 2008-Oct-05 21:40:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-05 21:40:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:40:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:40:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-05 21:40:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:40:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Oct-05 21:40:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Oct-05 21:40:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Oct-05 21:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.155 (still bad) 2008-Oct-05 21:40:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Oct-05 21:40:18 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:19 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.124 (still bad) 2008-Oct-05 21:40:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:20 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:40:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:21 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-05 21:40:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:22 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:40:23 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.127 (still bad) 2008-Oct-05 21:40:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:24 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:40:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:25 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.125 (still bad) 2008-Oct-05 21:40:26 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:40:27 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:40:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-05 21:40:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-05 21:40:27 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-05 21:40:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-05 21:40:27 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-05 21:40:27 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-05 21:40:27 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-05 21:40:27 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-05 21:40:27 LOG5 antvel: Calling 'antvel 221300.000000 42248.000000 J 0' 2008-Oct-05 21:40:27 LOG2 antvel: Precessing RA = 22:13:00.0 Dec = +04:22:48.0 Epoch = 2008.76633 J 2008-Oct-05 21:40:27 LOG2 antvel: Computed apparent RA = 22:13:28.1 Dec = +04:25:34.7 2008-Oct-05 21:40:27 LOG2 antvel: Parameters to Doppler: Topocentric 92427 2008 279 0.0 2008-Oct-05 21:40:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-05 21:40:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-05 21:40:27 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-05 21:40:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-05 21:40:27 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-05 21:40:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-05 21:40:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:40:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-05 21:40:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-05 21:40:27 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-05 21:40:27 LOG5 log_alfabeam: Parameters: 22.216666666666665 4.3799999999999999 22.230084 2008.7663328960377 18.999933 2008-Oct-05 21:40:27 LOG4 log_alfabeam: ALFABEAM 0 22.216666666666967 4.380000000000003 2008-Oct-05 21:40:27 LOG4 log_alfabeam: ALFABEAM 1 22.215555332310039 4.484830989563300 2008-Oct-05 21:40:27 LOG4 log_alfabeam: ALFABEAM 2 22.210917573844863 4.415554764864501 2008-Oct-05 21:40:27 LOG4 log_alfabeam: ALFABEAM 3 22.212001163914284 4.310644804611024 2008-Oct-05 21:40:27 LOG4 log_alfabeam: ALFABEAM 4 22.217794880145600 4.275188338124241 2008-Oct-05 21:40:27 LOG4 log_alfabeam: ALFABEAM 5 22.222443688622032 4.344958077747939 2008-Oct-05 21:40:27 LOG4 log_alfabeam: ALFABEAM 6 22.221287756855212 4.449688095041993 2008-Oct-05 21:40:27 INFO2 take_data: Starting WAPP+GALFA scan: 827900066 2008-Oct-05 21:40:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-05 21:40:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-05 21:40:28 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-05 21:40:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-05 21:40:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-05 21:40:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-05 21:40:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:40:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-05 21:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-05 21:40:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6029.00 2008-Oct-05 21:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-05 21:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Oct-05 21:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-05 21:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2008-Oct-05 21:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2008-Oct-05 21:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2008-Oct-05 21:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2008-Oct-05 21:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.123 (still bad) 2008-Oct-05 21:40:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:30 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:40:31 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:40:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2008-Oct-05 21:40:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 0.940 0.970 0.940 2008-Oct-05 21:40:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 1.004 0.899 1.056 2008-Oct-05 21:40:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 1.112 1.116 0.893 2008-Oct-05 21:40:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.090 0.906 0.100 2008-Oct-05 21:40:32 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:33 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 15 (99999966 != 99999967)! 2008-Oct-05 21:40:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:34 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-05 21:40:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:36 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 14 (99999966 != 99999967)! 2008-Oct-05 21:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.118 (still bad) 2008-Oct-05 21:40:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:37 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 13 (99999966 != 99999967)! 2008-Oct-05 21:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.116 (still bad) 2008-Oct-05 21:40:38 WARNING WAPP=4-chip_count: WARNING counts don't match between chip 0 and chip 12 (99999966 != 99999967)! 2008-Oct-05 21:40:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-05 21:40:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-05 21:40:39 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-05 21:40:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-05 21:40:39 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-05 21:40:39 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-05 21:40:39 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-05 21:40:39 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-05 21:40:39 LOG5 antvel: Calling 'antvel 221300.000000 42248.000000 J 0' 2008-Oct-05 21:40:39 LOG2 antvel: Precessing RA = 22:13:00.0 Dec = +04:22:48.0 Epoch = 2008.76633 J 2008-Oct-05 21:40:39 LOG2 antvel: Computed apparent RA = 22:13:28.1 Dec = +04:25:34.7 2008-Oct-05 21:40:39 LOG2 antvel: Parameters to Doppler: Topocentric 92439 2008 279 0.0 2008-Oct-05 21:40:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-05 21:40:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-05 21:40:39 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 13