2008-Oct-03 21:37:17 BEGIN executive: CIMA executive starting ... 2008-Oct-03 21:37:17 NOTE executive: STARTING NEW CIMA SESSION 2008-Oct-03 21:37:17 INFO1 executive: Using CIMA version 3.0.04 'next' from 2008-09-30 18:33 2008-Oct-03 21:37:17 INFO4 executive: This is an ON-LINE session 2008-Oct-03 21:37:17 INFO4 executive: This is a REMOTE session 2008-Oct-03 21:37:17 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Oct-03 21:37:17 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Betsey Adams, Drew Brisb' 2008-Oct-03 21:37:17 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20081003' 2008-Oct-03 21:37:18 LOG2 log_preferences: Currently applied preferences: 2008-Oct-03 21:37:18 LOG2 log_preferences: prefs(dailylog) = daily 2008-Oct-03 21:37:18 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Oct-03 21:37:18 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Oct-03 21:37:18 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Oct-03 21:37:18 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Oct-03 21:37:18 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Oct-03 21:37:18 LOG2 log_preferences: prefs(logcolours) = full 2008-Oct-03 21:37:18 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Oct-03 21:37:18 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Oct-03 21:37:18 LOG2 log_preferences: prefs(displayformat) = long 2008-Oct-03 21:37:18 LOG2 log_preferences: prefs(logformat) = new 2008-Oct-03 21:37:18 LOG2 log_preferences: prefs(fontsize) = 3 2008-Oct-03 21:37:18 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-03 21:37:18 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-03 21:37:18 ALERT executive: CIMA executive ready 2008-Oct-03 21:37:21 NOTE frontend: CIMA frontend ready 2008-Oct-03 21:37:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:37:21 LOG4 got_cormsg: From DATATAKING: setup 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Oct-03 21:37:27 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Oct-03 21:37:27 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:37:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:37:36 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Oct-03 21:37:36 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Oct-03 21:37:36 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-03 21:37:36 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-03 21:37:36 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-03 21:37:36 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-03 21:37:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-03 21:37:36 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-03 21:37:36 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-03 21:37:36 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-03 21:37:36 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-03 21:37:36 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-03 21:37:36 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Oct-03 21:37:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-03 21:37:36 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-03 21:37:36 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Oct-03 21:37:36 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-03 21:37:36 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-03 21:37:41 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Oct-03 21:37:41 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Oct-03 21:37:41 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Oct-03 21:37:41 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Oct-03 21:37:42 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-03 21:37:42 NOTE restart_wapp: Restarting all WAPPs 2008-Oct-03 21:37:42 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Oct-03 21:37:42 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Oct-03 21:37:42 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Oct-03 21:37:42 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-03 21:37:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:37:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:37:45 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Oct-03 21:37:45 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Oct-03 21:37:45 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Oct-03 21:37:45 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Oct-03 21:38:05 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Oct-03 21:38:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-03 21:38:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-03 21:38:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-03 21:38:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-03 21:38:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-03 21:38:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Oct-03 21:38:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-03 21:38:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-03 21:38:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-03 21:38:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-03 21:38:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-03 21:38:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-03 21:38:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-03 21:38:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-03 21:38:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-03 21:38:08 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Oct-03 21:38:08 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Oct-03 21:38:08 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-03 21:38:08 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-03 21:38:08 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-03 21:38:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-03 21:38:08 INFO1 config_iflo: Selecting receiver ALFA 2008-Oct-03 21:38:08 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Oct-03 21:38:08 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Oct-03 21:38:08 START begin_task: Starting task 'selecting receiver ALFA' 2008-Oct-03 21:38:08 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-03 21:38:08 NOTE select_receiver: Starting to select receiver ALFA 2008-Oct-03 21:38:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Oct-03 21:38:08 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Oct-03 21:38:08 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Oct-03 21:38:08 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Oct-03 21:38:08 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Oct-03 21:38:08 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-03 21:38:08 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Oct-03 21:38:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-03 21:38:08 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Oct-03 21:38:08 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Oct-03 21:38:08 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Oct-03 21:38:08 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-03 21:38:08 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Oct-03 21:38:08 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Oct-03 21:38:08 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Oct-03 21:38:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Oct-03 21:38:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-03 21:38:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-03 21:38:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-03 21:38:08 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-03 21:38:08 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Oct-03 21:38:08 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Oct-03 21:38:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-03 21:38:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-03 21:38:09 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Oct-03 21:38:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-03 21:38:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Oct-03 21:38:09 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-03 21:38:09 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Oct-03 21:38:09 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-03 21:38:09 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-03 21:38:09 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-03 21:38:09 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-03 21:38:09 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-03 21:38:09 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Oct-03 21:38:09 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-03 21:38:09 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Oct-03 21:38:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-03 21:38:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-03 21:38:09 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-03 21:38:09 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Oct-03 21:38:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-03 21:38:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-03 21:38:24 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-03 21:38:24 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Oct-03 21:38:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-03 21:38:24 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-03 21:38:24 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-03 21:38:24 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-03 21:38:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-03 21:38:24 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-03 21:38:24 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Oct-03 21:38:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-03 21:38:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-03 21:38:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-03 21:38:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-03 21:38:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-03 21:38:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-03 21:38:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-03 21:38:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-03 21:38:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-03 21:38:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-03 21:38:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-03 21:38:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-03 21:38:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-03 21:38:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-03 21:38:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-03 21:38:25 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Oct-03 21:38:25 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Oct-03 21:38:25 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-03 21:38:25 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-03 21:38:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-03 21:38:25 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-03 21:38:25 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-03 21:38:25 START begin_task: Starting task 'selecting calibration port' 2008-Oct-03 21:38:25 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-03 21:38:25 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-03 21:38:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-03 21:38:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-03 21:38:25 START begin_task: Starting task 'waiting on calport' 2008-Oct-03 21:38:25 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-03 21:38:25 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Oct-03 21:38:25 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-03 21:38:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-03 21:38:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-03 21:38:25 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-03 21:38:25 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Oct-03 21:38:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-03 21:38:25 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-03 21:38:25 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Oct-03 21:38:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-03 21:38:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-03 21:38:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-03 21:38:25 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-03 21:38:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-03 21:38:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:38:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-03 21:38:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-03 21:38:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-03 21:38:25 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Oct-03 21:38:25 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-03 21:38:25 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-03 21:38:25 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-03 21:38:25 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-03 21:38:25 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-03 21:38:25 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-03 21:38:25 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-03 21:38:26 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-03 21:38:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:38:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:38:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:38:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:38:26 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-03 21:38:26 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-03 21:38:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-03 21:38:26 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-03 21:38:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-03 21:38:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-03 21:38:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-03 21:38:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-03 21:38:26 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Oct-03 21:38:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:38:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:38:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:38:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:38:26 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-03 21:38:26 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-03 21:38:26 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-03 21:38:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-03 21:38:26 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-03 21:38:26 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Oct-03 21:38:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams, Drew Brisb' 2008-Oct-03 21:38:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-03 21:38:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-03 21:38:26 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Oct-03 21:38:26 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Oct-03 21:38:26 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-03 21:38:26 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-03 21:38:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-03 21:38:26 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-03 21:38:26 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-03 21:38:26 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-03 21:38:26 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-03 21:38:26 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-03 21:38:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-03 21:38:26 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-03 21:38:26 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Oct-03 21:38:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams, Drew Brisb' 2008-Oct-03 21:38:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20081003.a2010.0018.fits 2008-Oct-03 21:38:27 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20081003.a2010.0018.fits} 2008-Oct-03 21:38:27 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Oct-03 21:38:34 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-03 21:38:34 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-03 21:39:04 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Oct-03 21:39:12 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Oct-03 21:39:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Oct-03 21:39:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Oct-03 21:39:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Oct-03 21:39:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Oct-03 21:39:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Oct-03 21:39:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Oct-03 21:39:12 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Oct-03 21:39:12 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Oct-03 21:39:12 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Oct-03 21:39:12 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Oct-03 21:39:12 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Oct-03 21:39:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Oct-03 21:39:12 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Oct-03 21:39:12 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Oct-03 21:39:12 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Oct-03 21:39:12 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-03 21:39:12 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Oct-03 21:39:12 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Oct-03 21:39:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Oct-03 21:39:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Oct-03 21:39:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Oct-03 21:39:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Oct-03 21:39:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Oct-03 21:39:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-03 21:39:14 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Oct-03 21:39:14 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-03 21:39:14 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Oct-03 21:39:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Oct-03 21:39:14 LOG1 config_iflo: Receiver ALFA already selected 2008-Oct-03 21:39:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-03 21:39:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-03 21:39:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-03 21:39:14 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-03 21:39:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-03 21:39:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-03 21:39:14 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Oct-03 21:39:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-03 21:39:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-03 21:39:14 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Oct-03 21:39:14 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Oct-03 21:39:14 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Oct-03 21:39:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Oct-03 21:39:14 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Oct-03 21:39:14 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Oct-03 21:39:14 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Oct-03 21:39:14 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Oct-03 21:39:14 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Oct-03 21:39:14 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Oct-03 21:39:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Oct-03 21:39:14 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Oct-03 21:39:14 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Oct-03 21:39:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Oct-03 21:39:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-03 21:39:14 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Oct-03 21:39:14 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-03 21:39:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Oct-03 21:39:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:39:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-03 21:39:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:39:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:39:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-03 21:39:15 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Oct-03 21:39:15 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2008-Oct-03 21:39:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Oct-03 21:39:15 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Oct-03 21:39:15 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-03 21:39:15 DONE finish_task: DONE finished configuration: IF/LO path 2008-Oct-03 21:39:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-03 21:39:15 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Oct-03 21:39:15 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Oct-03 21:39:15 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Oct-03 21:39:15 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-03 21:39:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Oct-03 21:39:15 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Oct-03 21:39:15 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Oct-03 21:39:15 START begin_task: Starting task 'selecting calibration port' 2008-Oct-03 21:39:15 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-03 21:39:15 LOG3 vw_send: To DATATAKING: calport 3 2008-Oct-03 21:39:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Oct-03 21:39:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-03 21:39:15 START begin_task: Starting task 'waiting on calport' 2008-Oct-03 21:39:15 LOG5 begin_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-03 21:39:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:39:15 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Oct-03 21:39:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-03 21:39:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:39:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-03 21:39:15 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Oct-03 21:39:15 LOG5 end_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2008-Oct-03 21:39:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Oct-03 21:39:15 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Oct-03 21:39:15 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Oct-03 21:39:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-03 21:39:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-03 21:39:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-03 21:39:15 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-03 21:39:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:39:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-03 21:39:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-03 21:39:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-03 21:39:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-03 21:39:15 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Oct-03 21:39:15 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Oct-03 21:39:15 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Oct-03 21:39:16 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Oct-03 21:39:16 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Oct-03 21:39:16 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Oct-03 21:39:16 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Oct-03 21:39:16 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Oct-03 21:39:16 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Oct-03 21:39:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:39:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:39:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:39:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:39:16 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Oct-03 21:39:16 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Oct-03 21:39:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-03 21:39:16 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-03 21:39:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-03 21:39:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-03 21:39:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-03 21:39:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-03 21:39:16 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Oct-03 21:39:16 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Oct-03 21:39:16 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Oct-03 21:39:16 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-03 21:39:16 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Oct-03 21:39:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-03 21:39:16 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Oct-03 21:39:16 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Oct-03 21:39:16 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Oct-03 21:39:16 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Oct-03 21:39:16 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Oct-03 21:39:16 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Oct-03 21:39:16 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Oct-03 21:39:16 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-03 21:39:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Oct-03 21:39:16 LOG3 track_source: Calling 'track_source galfasrc 221000.0 +045200 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Oct-03 21:39:16 START begin_task: Starting task 'sending tracking commands' 2008-Oct-03 21:39:16 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-03 21:39:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Oct-03 21:39:16 INFO1 track_source: Starting to track galfasrc 2008-Oct-03 21:39:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-03 21:39:16 LOG3 vw_send: To DATATAKING: set ra 221000.0 2008-Oct-03 21:39:16 LOG3 vw_send: To DATATAKING: set dec +045200 2008-Oct-03 21:39:16 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Oct-03 21:39:16 LOG3 vw_send: To DATATAKING: pnt tr 221000.0 +045200 -CJ 2008-Oct-03 21:39:16 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Oct-03 21:39:16 STOP finish_task: Finishing task 'sending tracking commands' 2008-Oct-03 21:39:16 LOG5 finish_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-03 21:39:16 INFO2 finish_task: DONE finished sending: tracking commands 2008-Oct-03 21:39:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-03 21:39:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Oct-03 21:39:16 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Oct-03 21:39:16 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Oct-03 21:39:16 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-03 21:39:16 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Oct-03 21:39:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-03 21:39:16 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Oct-03 21:39:16 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Oct-03 21:39:17 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Oct-03 21:39:17 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Oct-03 21:39:17 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Oct-03 21:39:17 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-03 21:39:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Oct-03 21:39:17 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Oct-03 21:39:17 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Oct-03 21:39:17 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Oct-03 21:39:17 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Oct-03 21:39:17 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-03 21:39:17 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Oct-03 21:39:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Oct-03 21:39:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Oct-03 21:39:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Oct-03 21:39:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams, Drew Brisb' 2008-Oct-03 21:39:17 LOG4 got_cormsg: From DATATAKING: set ra 221000.0 2008-Oct-03 21:39:17 LOG4 got_cormsg: From DATATAKING: set dec +045200 2008-Oct-03 21:39:17 LOG4 got_cormsg: From DATATAKING: vw% 221000.0 2008-Oct-03 21:39:17 LOG4 got_cormsg: From DATATAKING: vw% +045200 2008-Oct-03 21:39:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:39:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Oct-03 21:39:17 LOG4 got_cormsg: From DATATAKING: pnt tr 221000.0 +045200 -CJ 2008-Oct-03 21:39:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Oct-03 21:39:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Oct-03 21:39:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:39:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Oct-03 21:39:17 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Oct-03 21:39:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Oct-03 21:39:17 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Oct-03 21:39:18 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-03 21:39:18 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Oct-03 21:39:18 LOG5 finish_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-03 21:39:18 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Oct-03 21:39:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-03 21:39:18 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Oct-03 21:39:18 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Oct-03 21:39:18 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Oct-03 21:39:18 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Oct-03 21:39:18 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-03 21:39:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Oct-03 21:39:18 LOG3 waittrk: Start waittrk 5 2008-Oct-03 21:39:18 START begin_task: Starting task 'waiting on telescope movement' 2008-Oct-03 21:39:18 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-03 21:39:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Oct-03 21:39:23 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Oct-03 21:39:23 START begin_task: Starting task 'waiting on telescope on source' 2008-Oct-03 21:39:23 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-03 21:39:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Oct-03 21:39:46 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Oct-03 21:39:46 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Oct-03 21:39:46 INFO2 waittrk: Now tracking galfasrc 2008-Oct-03 21:39:46 LOG4 waittrk: Current telescope position: Az = 354.05 ZA = 13.48 2008-Oct-03 21:39:46 STOP finish_task: Finishing task 'waiting on telescope' 2008-Oct-03 21:39:46 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-03 21:39:46 DONE finish_task: DONE finished waiting: telescope on source 2008-Oct-03 21:39:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Oct-03 21:39:46 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Oct-03 21:39:46 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Oct-03 21:39:46 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-03 21:39:46 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Oct-03 21:39:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Oct-03 21:39:47 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Oct-03 21:39:47 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Oct-03 21:39:47 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Oct-03 21:39:47 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Oct-03 21:39:47 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Oct-03 21:39:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Oct-03 21:39:47 START begin_task: Starting task 'selecting calibration type' 2008-Oct-03 21:39:47 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-03 21:39:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Oct-03 21:39:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Oct-03 21:39:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-03 21:39:47 START begin_task: Starting task 'waiting on setcal' 2008-Oct-03 21:39:47 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-03 21:39:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Oct-03 21:39:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-03 21:39:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:39:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-03 21:39:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Oct-03 21:39:47 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2008-Oct-03 21:39:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Oct-03 21:39:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-03 21:39:47 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Oct-03 21:39:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-03 21:39:47 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-03 21:39:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:39:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-03 21:39:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-03 21:39:48 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Oct-03 21:39:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-03 21:39:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Oct-03 21:39:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Oct-03 21:39:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Oct-03 21:39:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-Oct-03 21:39:48 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-03 21:39:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Oct-03 21:39:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Oct-03 21:39:48 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2008-Oct-03 21:39:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Oct-03 21:39:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Oct-03 21:39:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Oct-03 21:39:48 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Oct-03 21:39:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:39:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:39:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:39:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams, Drew Brisb 2008-Oct-03 21:39:48 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20081003.a2010.0018.fits' is empty! 2008-Oct-03 21:39:48 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Oct-03 21:39:48 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Oct-03 21:39:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Oct-03 21:39:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Oct-03 21:39:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Oct-03 21:39:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-03 21:39:48 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-03 21:39:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-03 21:39:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Oct-03 21:39:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-03 21:39:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-03 21:39:48 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Oct-03 21:39:48 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Oct-03 21:39:48 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-03 21:39:48 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-03 21:39:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Oct-03 21:39:48 INFO2 adjust_power: Starting to adjust WAPP power 2008-Oct-03 21:39:48 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Oct-03 21:39:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Oct-03 21:39:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Oct-03 21:39:48 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Oct-03 21:39:48 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-03 21:39:49 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Oct-03 21:39:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Oct-03 21:39:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams, Drew Brisb' 2008-Oct-03 21:39:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:39:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Oct-03 21:39:52 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Oct-03 21:39:52 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Oct-03 21:39:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Oct-03 21:39:52 START begin_task: Starting task 'adjusting WAPP power' 2008-Oct-03 21:39:52 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-03 21:39:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Oct-03 21:39:52 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-03 21:39:52 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-03 21:39:52 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-03 21:39:52 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Oct-03 21:39:52 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Oct-03 21:39:52 LOG5 begin_task: Level: (5) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-03 21:39:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Oct-03 21:39:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:39:52 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 4 dB --- beam 1: 6 6 dB 2008-Oct-03 21:39:52 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 4 4 dB 2008-Oct-03 21:39:52 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2008-Oct-03 21:39:52 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 1 dB --- beam 7: 1 2 dB 2008-Oct-03 21:39:52 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Oct-03 21:39:52 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Oct-03 21:39:52 LOG5 end_task: Level: (5) ID = <10039> Status = 0 0 0 0 ok 2008-Oct-03 21:39:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.049 1.093 ALFA beam 1: 0.912 0.889 2008-Oct-03 21:39:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.007 0.916 ALFA beam 3: 1.042 0.977 2008-Oct-03 21:39:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.037 1.047 ALFA beam 5: 1.061 1.057 2008-Oct-03 21:39:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.962 1.043 ALFA beam 7: 1.079 0.922 2008-Oct-03 21:39:52 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-03 21:39:52 LOG5 finish_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-03 21:39:52 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Oct-03 21:39:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-03 21:39:53 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-03 21:39:53 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2008-Oct-03 21:39:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Oct-03 21:39:53 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Oct-03 21:39:53 LOG5 finish_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-03 21:39:53 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Oct-03 21:39:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Oct-03 21:39:53 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Oct-03 21:39:53 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Oct-03 21:39:53 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Oct-03 21:39:53 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Oct-03 21:39:53 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-03 21:39:53 LOG5 antvel: Calling 'antvel 221000.000000 45200.000000 J 0' 2008-Oct-03 21:39:53 LOG2 antvel: Precessing RA = 22:10:00.0 Dec = +04:52:00.0 Epoch = 2008.76086 J 2008-Oct-03 21:39:53 LOG2 antvel: Computed apparent RA = 22:10:28.0 Dec = +04:54:45.5 2008-Oct-03 21:39:53 LOG2 antvel: Parameters to Doppler: Topocentric 92392 2008 277 0.0 2008-Oct-03 21:39:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-03 21:39:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-03 21:39:53 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-03 21:39:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-03 21:39:53 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-03 21:39:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-03 21:39:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:39:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-03 21:39:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-03 21:39:53 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-03 21:39:53 LOG5 log_alfabeam: Parameters: 22.166666666666668 4.8666666666666671 22.088916 2008.7608560853805 18.999933 2008-Oct-03 21:39:53 LOG4 log_alfabeam: ALFABEAM 0 22.166666666666643 4.866666666666668 2008-Oct-03 21:39:53 LOG4 log_alfabeam: ALFABEAM 1 22.164881214145719 4.969397867608569 2008-Oct-03 21:39:53 LOG4 log_alfabeam: ALFABEAM 2 22.160710837126295 4.893742653409185 2008-Oct-03 21:39:53 LOG4 log_alfabeam: ALFABEAM 3 22.162468154049890 4.790888884615319 2008-Oct-03 21:39:53 LOG4 log_alfabeam: ALFABEAM 4 22.168469129482371 4.763980360500660 2008-Oct-03 21:39:53 LOG4 log_alfabeam: ALFABEAM 5 22.172647820076083 4.840158933969035 2008-Oct-03 21:39:53 LOG4 log_alfabeam: ALFABEAM 6 22.170817267684697 4.942719884132526 2008-Oct-03 21:39:53 INFO2 take_data: Starting WAPP+GALFA scan: 827700063 2008-Oct-03 21:39:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-03 21:39:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-03 21:39:53 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-03 21:39:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-03 21:39:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-03 21:39:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:39:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:39:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:39:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5994.00 2008-Oct-03 21:39:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-03 21:39:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Oct-03 21:39:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-03 21:39:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 995.000000 MHz 2008-Oct-03 21:39:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 985.000000 MHz 2008-Oct-03 21:39:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:39:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:39:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:39:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-03 21:40:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-03 21:40:04 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Oct-03 21:40:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-03 21:40:04 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Oct-03 21:40:04 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Oct-03 21:40:04 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Oct-03 21:40:04 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-03 21:40:04 LOG5 antvel: Calling 'antvel 221000.000000 45200.000000 J 0' 2008-Oct-03 21:40:04 LOG2 antvel: Precessing RA = 22:10:00.0 Dec = +04:52:00.0 Epoch = 2008.76086 J 2008-Oct-03 21:40:04 LOG2 antvel: Computed apparent RA = 22:10:28.0 Dec = +04:54:45.5 2008-Oct-03 21:40:04 LOG2 antvel: Parameters to Doppler: Topocentric 92404 2008 277 0.0 2008-Oct-03 21:40:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-03 21:40:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-03 21:40:04 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-03 21:40:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-03 21:40:04 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-03 21:40:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-03 21:40:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:40:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-03 21:40:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-03 21:40:04 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-03 21:40:04 LOG5 log_alfabeam: Parameters: 22.166666666666668 4.8666666666666671 22.092258 2008.7608564656375 18.999933 2008-Oct-03 21:40:04 LOG4 log_alfabeam: ALFABEAM 0 22.166666666666650 4.866666666666666 2008-Oct-03 21:40:04 LOG4 log_alfabeam: ALFABEAM 1 22.164905577506971 4.969491747941246 2008-Oct-03 21:40:04 LOG4 log_alfabeam: ALFABEAM 2 22.160717294344103 4.894057867845619 2008-Oct-03 21:40:04 LOG4 log_alfabeam: ALFABEAM 3 22.162450215352525 4.791111667186394 2008-Oct-03 21:40:04 LOG4 log_alfabeam: ALFABEAM 4 22.168444789833938 4.763885594577038 2008-Oct-03 21:40:04 LOG4 log_alfabeam: ALFABEAM 5 22.172641503925259 4.839842572854491 2008-Oct-03 21:40:04 LOG4 log_alfabeam: ALFABEAM 6 22.170835257985377 4.942499732885438 2008-Oct-03 21:40:04 INFO2 take_data: Starting WAPP+GALFA scan: 827700064 2008-Oct-03 21:40:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-03 21:40:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-03 21:40:05 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-03 21:40:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-03 21:40:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-03 21:40:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:40:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:40:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:40:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6006.00 2008-Oct-03 21:40:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-03 21:40:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Oct-03 21:40:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-03 21:40:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 995.000000 MHz 2008-Oct-03 21:40:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 985.000000 MHz 2008-Oct-03 21:40:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-03 21:40:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-03 21:40:16 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Oct-03 21:40:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-03 21:40:16 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Oct-03 21:40:16 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Oct-03 21:40:16 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Oct-03 21:40:16 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-03 21:40:16 LOG5 antvel: Calling 'antvel 221000.000000 45200.000000 J 0' 2008-Oct-03 21:40:16 LOG2 antvel: Precessing RA = 22:10:00.0 Dec = +04:52:00.0 Epoch = 2008.76086 J 2008-Oct-03 21:40:16 LOG2 antvel: Computed apparent RA = 22:10:28.0 Dec = +04:54:45.5 2008-Oct-03 21:40:16 LOG2 antvel: Parameters to Doppler: Topocentric 92416 2008 277 0.0 2008-Oct-03 21:40:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-03 21:40:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-03 21:40:16 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-03 21:40:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-03 21:40:16 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-03 21:40:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-03 21:40:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:40:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-03 21:40:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-03 21:40:16 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-03 21:40:16 LOG5 log_alfabeam: Parameters: 22.166666666666668 4.8666666666666671 22.095601 2008.7608568458945 18.999933 2008-Oct-03 21:40:16 LOG4 log_alfabeam: ALFABEAM 0 22.166666666666643 4.866666666666669 2008-Oct-03 21:40:16 LOG4 log_alfabeam: ALFABEAM 1 22.164929986209234 4.969584425507963 2008-Oct-03 21:40:16 LOG4 log_alfabeam: ALFABEAM 2 22.160723832364347 4.894373035576651 2008-Oct-03 21:40:16 LOG4 log_alfabeam: ALFABEAM 3 22.162432312792230 4.791335611076522 2008-Oct-03 21:40:16 LOG4 log_alfabeam: ALFABEAM 4 22.168420404442031 4.763792028402871 2008-Oct-03 21:40:16 LOG4 log_alfabeam: ALFABEAM 5 22.172635106544771 4.839526241565028 2008-Oct-03 21:40:16 LOG4 log_alfabeam: ALFABEAM 6 22.170853213471695 4.942278417079017 2008-Oct-03 21:40:16 INFO2 take_data: Starting WAPP+GALFA scan: 827700065 2008-Oct-03 21:40:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-03 21:40:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-03 21:40:17 LOG5 begin_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-03 21:40:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-03 21:40:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-03 21:40:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:40:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:40:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:40:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6018.00 2008-Oct-03 21:40:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-03 21:40:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Oct-03 21:40:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-03 21:40:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 995.000000 MHz 2008-Oct-03 21:40:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 985.000000 MHz 2008-Oct-03 21:40:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-03 21:40:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-03 21:40:28 LOG5 end_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2008-Oct-03 21:40:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-03 21:40:28 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Oct-03 21:40:28 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Oct-03 21:40:28 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Oct-03 21:40:28 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-03 21:40:28 LOG5 antvel: Calling 'antvel 221000.000000 45200.000000 J 0' 2008-Oct-03 21:40:28 LOG2 antvel: Precessing RA = 22:10:00.0 Dec = +04:52:00.0 Epoch = 2008.76086 J 2008-Oct-03 21:40:28 LOG2 antvel: Computed apparent RA = 22:10:28.0 Dec = +04:54:45.5 2008-Oct-03 21:40:28 LOG2 antvel: Parameters to Doppler: Topocentric 92428 2008 277 0.0 2008-Oct-03 21:40:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-03 21:40:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-03 21:40:28 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-03 21:40:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-03 21:40:28 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-03 21:40:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-03 21:40:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:40:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-03 21:40:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-03 21:40:28 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-03 21:40:28 LOG5 log_alfabeam: Parameters: 22.166666666666668 4.8666666666666671 22.098943 2008.7608572261515 18.999933 2008-Oct-03 21:40:28 LOG4 log_alfabeam: ALFABEAM 0 22.166666666666632 4.866666666666664 2008-Oct-03 21:40:28 LOG4 log_alfabeam: ALFABEAM 1 22.164954424748618 4.969675838801283 2008-Oct-03 21:40:28 LOG4 log_alfabeam: ALFABEAM 2 22.160730447164390 4.894687955220888 2008-Oct-03 21:40:28 LOG4 log_alfabeam: ALFABEAM 3 22.162414457873140 4.791560575433615 2008-Oct-03 21:40:28 LOG4 log_alfabeam: ALFABEAM 4 22.168395988794078 4.763699724083657 2008-Oct-03 21:40:28 LOG4 log_alfabeam: ALFABEAM 5 22.172628631860970 4.839210142241233 2008-Oct-03 21:40:28 LOG4 log_alfabeam: ALFABEAM 6 22.170871122606027 4.942056075773664 2008-Oct-03 21:40:28 INFO2 take_data: Starting WAPP+GALFA scan: 827700066 2008-Oct-03 21:40:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-03 21:40:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-03 21:40:29 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-03 21:40:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-03 21:40:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-03 21:40:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:40:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:40:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:40:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6030.00 2008-Oct-03 21:40:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-03 21:40:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Oct-03 21:40:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-03 21:40:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 995.000000 MHz 2008-Oct-03 21:40:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 985.000000 MHz 2008-Oct-03 21:40:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-03 21:40:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-03 21:40:40 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2008-Oct-03 21:40:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-03 21:40:40 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Oct-03 21:40:40 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Oct-03 21:40:40 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Oct-03 21:40:40 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Oct-03 21:40:40 LOG5 antvel: Calling 'antvel 221000.000000 45200.000000 J 0' 2008-Oct-03 21:40:40 LOG2 antvel: Precessing RA = 22:10:00.0 Dec = +04:52:00.0 Epoch = 2008.76086 J 2008-Oct-03 21:40:40 LOG2 antvel: Computed apparent RA = 22:10:28.0 Dec = +04:54:45.5 2008-Oct-03 21:40:40 LOG2 antvel: Parameters to Doppler: Topocentric 92440 2008 277 0.0 2008-Oct-03 21:40:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-03 21:40:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Oct-03 21:40:40 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Oct-03 21:40:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-03 21:40:40 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-03 21:40:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-03 21:40:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:40:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-03 21:40:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-03 21:40:40 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-03 21:40:40 LOG5 log_alfabeam: Parameters: 22.166666666666668 4.8666666666666671 22.102286 2008.7608576064088 18.999933 2008-Oct-03 21:40:40 LOG4 log_alfabeam: ALFABEAM 0 22.166666666666615 4.866666666666674 2008-Oct-03 21:40:40 LOG4 log_alfabeam: ALFABEAM 1 22.164978906842737 4.969766036599665 2008-Oct-03 21:40:40 LOG4 log_alfabeam: ALFABEAM 2 22.160737142581894 4.895002802402809 2008-Oct-03 21:40:40 LOG4 log_alfabeam: ALFABEAM 3 22.162396640700472 4.791786687866842 2008-Oct-03 21:40:40 LOG4 log_alfabeam: ALFABEAM 4 22.168371529183656 4.763608632374966 2008-Oct-03 21:40:40 LOG4 log_alfabeam: ALFABEAM 5 22.172622076107835 4.838894098618615 2008-Oct-03 21:40:40 LOG4 log_alfabeam: ALFABEAM 6 22.170888995313621 4.941832582710640 2008-Oct-03 21:40:40 INFO2 take_data: Starting WAPP+GALFA scan: 827700067 2008-Oct-03 21:40:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-03 21:40:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-03 21:40:41 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-03 21:40:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-03 21:40:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Oct-03 21:40:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:40:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:40:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:40:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6042.00 2008-Oct-03 21:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-03 21:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Oct-03 21:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-03 21:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 995.000000 MHz 2008-Oct-03 21:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 985.000000 MHz 2008-Oct-03 21:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-03 21:40:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-03 21:40:52 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Oct-03 21:40:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-03 21:40:52 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Oct-03 21:40:52 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Oct-03 21:40:52 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Oct-03 21:40:52 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Oct-03 21:40:52 LOG5 antvel: Calling 'antvel 221000.000000 45200.000000 J 0' 2008-Oct-03 21:40:52 LOG2 antvel: Precessing RA = 22:10:00.0 Dec = +04:52:00.0 Epoch = 2008.76086 J 2008-Oct-03 21:40:52 LOG2 antvel: Computed apparent RA = 22:10:28.0 Dec = +04:54:45.5 2008-Oct-03 21:40:52 LOG2 antvel: Parameters to Doppler: Topocentric 92452 2008 277 0.0 2008-Oct-03 21:40:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-03 21:40:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Oct-03 21:40:52 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Oct-03 21:40:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-03 21:40:52 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-03 21:40:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-03 21:40:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:40:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-03 21:40:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-03 21:40:52 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-03 21:40:52 LOG5 log_alfabeam: Parameters: 22.166666666666668 4.8666666666666671 22.105628 2008.7608579866658 18.999933 2008-Oct-03 21:40:52 LOG4 log_alfabeam: ALFABEAM 0 22.166666666666643 4.866666666666662 2008-Oct-03 21:40:52 LOG4 log_alfabeam: ALFABEAM 1 22.165003416931700 4.969854959154170 2008-Oct-03 21:40:52 LOG4 log_alfabeam: ALFABEAM 2 22.160743914480847 4.895317375925891 2008-Oct-03 21:40:52 LOG4 log_alfabeam: ALFABEAM 3 22.162378872719895 4.792013805942930 2008-Oct-03 21:40:52 LOG4 log_alfabeam: ALFABEAM 4 22.168347041154636 4.763518813628202 2008-Oct-03 21:40:52 LOG4 log_alfabeam: ALFABEAM 5 22.172615443325792 4.838578312678125 2008-Oct-03 21:40:52 LOG4 log_alfabeam: ALFABEAM 6 22.170906820113231 4.941608078537060 2008-Oct-03 21:40:52 INFO2 take_data: Starting WAPP+GALFA scan: 827700068 2008-Oct-03 21:40:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-03 21:40:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-03 21:40:53 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-03 21:40:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-03 21:40:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Oct-03 21:40:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:40:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:40:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:40:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6054.00 2008-Oct-03 21:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-03 21:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Oct-03 21:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-03 21:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 995.000000 MHz 2008-Oct-03 21:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 985.000000 MHz 2008-Oct-03 21:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-03 21:41:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-03 21:41:04 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Oct-03 21:41:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-03 21:41:04 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Oct-03 21:41:04 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Oct-03 21:41:04 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Oct-03 21:41:04 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Oct-03 21:41:04 LOG5 antvel: Calling 'antvel 221000.000000 45200.000000 J 0' 2008-Oct-03 21:41:04 LOG2 antvel: Precessing RA = 22:10:00.0 Dec = +04:52:00.0 Epoch = 2008.76086 J 2008-Oct-03 21:41:04 LOG2 antvel: Computed apparent RA = 22:10:28.0 Dec = +04:54:45.5 2008-Oct-03 21:41:04 LOG2 antvel: Parameters to Doppler: Topocentric 92464 2008 277 0.0 2008-Oct-03 21:41:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-03 21:41:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Oct-03 21:41:04 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Oct-03 21:41:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-03 21:41:04 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-03 21:41:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-03 21:41:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:41:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Oct-03 21:41:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-03 21:41:04 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-03 21:41:04 LOG5 log_alfabeam: Parameters: 22.166666666666668 4.8666666666666671 22.108971 2008.7608583669228 18.999933 2008-Oct-03 21:41:04 LOG4 log_alfabeam: ALFABEAM 0 22.166666666666632 4.866666666666668 2008-Oct-03 21:41:04 LOG4 log_alfabeam: ALFABEAM 1 22.165027968764210 4.969942654030791 2008-Oct-03 21:41:04 LOG4 log_alfabeam: ALFABEAM 2 22.160750766773631 4.895631851205592 2008-Oct-03 21:41:04 LOG4 log_alfabeam: ALFABEAM 3 22.162361144080776 4.792242058277982 2008-Oct-03 21:41:04 LOG4 log_alfabeam: ALFABEAM 4 22.168322510968952 4.763430219809320 2008-Oct-03 21:41:04 LOG4 log_alfabeam: ALFABEAM 5 22.172608729673378 4.838262608350123 2008-Oct-03 21:41:04 LOG4 log_alfabeam: ALFABEAM 6 22.170924606887002 4.941382435982200 2008-Oct-03 21:41:04 INFO2 take_data: Starting WAPP+GALFA scan: 827700069 2008-Oct-03 21:41:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-03 21:41:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-03 21:41:05 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-03 21:41:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-03 21:41:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Oct-03 21:41:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:41:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:41:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:41:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6066.00 2008-Oct-03 21:41:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-03 21:41:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Oct-03 21:41:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-03 21:41:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 995.000000 MHz 2008-Oct-03 21:41:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 985.000000 MHz 2008-Oct-03 21:41:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-03 21:41:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-03 21:41:16 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Oct-03 21:41:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-03 21:41:16 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Oct-03 21:41:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Oct-03 21:41:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Oct-03 21:41:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Oct-03 21:41:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Oct-03 21:41:16 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-03 21:41:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Oct-03 21:41:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Oct-03 21:41:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Oct-03 21:41:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Oct-03 21:41:16 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Oct-03 21:41:16 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Oct-03 21:41:16 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Oct-03 21:41:16 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Oct-03 21:41:16 LOG5 antvel: Calling 'antvel 221000.000000 45200.000000 J 0' 2008-Oct-03 21:41:16 LOG2 antvel: Precessing RA = 22:10:00.0 Dec = +04:52:00.0 Epoch = 2008.76086 J 2008-Oct-03 21:41:16 LOG2 antvel: Computed apparent RA = 22:10:28.0 Dec = +04:54:45.5 2008-Oct-03 21:41:16 LOG2 antvel: Parameters to Doppler: Topocentric 92476 2008 277 0.0 2008-Oct-03 21:41:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-03 21:41:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Oct-03 21:41:16 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Oct-03 21:41:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-03 21:41:16 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-03 21:41:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-03 21:41:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:41:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-03 21:41:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-03 21:41:16 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-03 21:41:16 LOG5 log_alfabeam: Parameters: 22.166666666666668 4.8666666666666671 22.112313 2008.7608587471798 18.999933 2008-Oct-03 21:41:16 LOG4 log_alfabeam: ALFABEAM 0 22.166666666666643 4.866666666666664 2008-Oct-03 21:41:16 LOG4 log_alfabeam: ALFABEAM 1 22.165052546727527 4.970029063259128 2008-Oct-03 21:41:16 LOG4 log_alfabeam: ALFABEAM 2 22.160757695211249 4.895946027271151 2008-Oct-03 21:41:16 LOG4 log_alfabeam: ALFABEAM 3 22.162343466167854 4.792471300878761 2008-Oct-03 21:41:16 LOG4 log_alfabeam: ALFABEAM 4 22.168297954224279 4.763342909495324 2008-Oct-03 21:41:16 LOG4 log_alfabeam: ALFABEAM 5 22.172601939304958 4.837947187414776 2008-Oct-03 21:41:16 LOG4 log_alfabeam: ALFABEAM 6 22.170942344212815 4.941155797259424 2008-Oct-03 21:41:16 INFO2 take_data: Starting WAPP+GALFA scan: 827700070 2008-Oct-03 21:41:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-03 21:41:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-03 21:41:17 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-03 21:41:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-03 21:41:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Oct-03 21:41:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:41:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:41:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:41:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6078.00 2008-Oct-03 21:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-03 21:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Oct-03 21:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-03 21:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 995.000000 MHz 2008-Oct-03 21:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 985.000000 MHz 2008-Oct-03 21:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-03 21:41:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-03 21:41:28 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Oct-03 21:41:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-03 21:41:28 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Oct-03 21:41:28 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Oct-03 21:41:28 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Oct-03 21:41:28 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Oct-03 21:41:28 LOG5 antvel: Calling 'antvel 221000.000000 45200.000000 J 0' 2008-Oct-03 21:41:28 LOG2 antvel: Precessing RA = 22:10:00.0 Dec = +04:52:00.0 Epoch = 2008.76086 J 2008-Oct-03 21:41:28 LOG2 antvel: Computed apparent RA = 22:10:28.0 Dec = +04:54:45.5 2008-Oct-03 21:41:28 LOG2 antvel: Parameters to Doppler: Topocentric 92488 2008 277 0.0 2008-Oct-03 21:41:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-03 21:41:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Oct-03 21:41:28 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Oct-03 21:41:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-03 21:41:28 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-03 21:41:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-03 21:41:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:41:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-03 21:41:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-03 21:41:28 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-03 21:41:28 LOG5 log_alfabeam: Parameters: 22.166666666666668 4.8666666666666671 22.115656 2008.7608591274368 18.999933 2008-Oct-03 21:41:28 LOG4 log_alfabeam: ALFABEAM 0 22.166666666666643 4.866666666666669 2008-Oct-03 21:41:28 LOG4 log_alfabeam: ALFABEAM 1 22.165077164599939 4.970114233185309 2008-Oct-03 21:41:28 LOG4 log_alfabeam: ALFABEAM 2 22.160764703780583 4.896260079308591 2008-Oct-03 21:41:28 LOG4 log_alfabeam: ALFABEAM 3 22.162325829176066 4.792701663355104 2008-Oct-03 21:41:28 LOG4 log_alfabeam: ALFABEAM 4 22.168273357152515 4.763256835870200 2008-Oct-03 21:41:28 LOG4 log_alfabeam: ALFABEAM 5 22.172595068304037 4.837631874017948 2008-Oct-03 21:41:28 LOG4 log_alfabeam: ALFABEAM 6 22.170960041928460 4.940928034098937 2008-Oct-03 21:41:28 INFO2 take_data: Starting WAPP+GALFA scan: 827700071 2008-Oct-03 21:41:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-03 21:41:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-03 21:41:29 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-03 21:41:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-03 21:41:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Oct-03 21:41:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:41:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:41:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:41:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6090.00 2008-Oct-03 21:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-03 21:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Oct-03 21:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-03 21:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 995.000000 MHz 2008-Oct-03 21:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 985.000000 MHz 2008-Oct-03 21:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-03 21:41:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-03 21:41:40 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Oct-03 21:41:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-03 21:41:40 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Oct-03 21:41:40 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Oct-03 21:41:40 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Oct-03 21:41:40 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Oct-03 21:41:40 LOG5 antvel: Calling 'antvel 221000.000000 45200.000000 J 0' 2008-Oct-03 21:41:40 LOG2 antvel: Precessing RA = 22:10:00.0 Dec = +04:52:00.0 Epoch = 2008.76086 J 2008-Oct-03 21:41:40 LOG2 antvel: Computed apparent RA = 22:10:28.0 Dec = +04:54:45.5 2008-Oct-03 21:41:40 LOG2 antvel: Parameters to Doppler: Topocentric 92500 2008 277 0.0 2008-Oct-03 21:41:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-03 21:41:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Oct-03 21:41:40 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Oct-03 21:41:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-03 21:41:40 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-03 21:41:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-03 21:41:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:41:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-03 21:41:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-03 21:41:40 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-03 21:41:40 LOG5 log_alfabeam: Parameters: 22.166666666666668 4.8666666666666671 22.118998 2008.760859507694 18.999933 2008-Oct-03 21:41:40 LOG4 log_alfabeam: ALFABEAM 0 22.166666666666657 4.866666666666664 2008-Oct-03 21:41:40 LOG4 log_alfabeam: ALFABEAM 1 22.165101806718397 4.970198107636545 2008-Oct-03 21:41:40 LOG4 log_alfabeam: ALFABEAM 2 22.160771788119902 4.896573806613915 2008-Oct-03 21:41:40 LOG4 log_alfabeam: ALFABEAM 3 22.162308244426342 4.792933000176143 2008-Oct-03 21:41:40 LOG4 log_alfabeam: ALFABEAM 4 22.168248735402134 4.763172055717254 2008-Oct-03 21:41:40 LOG4 log_alfabeam: ALFABEAM 5 22.172588120938407 4.837316869697841 2008-Oct-03 21:41:40 LOG4 log_alfabeam: ALFABEAM 6 22.170977688673400 4.940699290258842 2008-Oct-03 21:41:40 INFO2 take_data: Starting WAPP+GALFA scan: 827700072 2008-Oct-03 21:41:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-03 21:41:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-03 21:41:41 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-03 21:41:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-03 21:41:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Oct-03 21:41:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:41:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:41:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:41:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6102.00 2008-Oct-03 21:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-03 21:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Oct-03 21:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-03 21:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 995.000000 MHz 2008-Oct-03 21:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 985.000000 MHz 2008-Oct-03 21:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Oct-03 21:41:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Oct-03 21:41:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Oct-03 21:41:52 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-Oct-03 21:41:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Oct-03 21:41:52 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Oct-03 21:41:52 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Oct-03 21:41:52 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Oct-03 21:41:52 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Oct-03 21:41:52 LOG5 antvel: Calling 'antvel 221000.000000 45200.000000 J 0' 2008-Oct-03 21:41:52 LOG2 antvel: Precessing RA = 22:10:00.0 Dec = +04:52:00.0 Epoch = 2008.76086 J 2008-Oct-03 21:41:52 LOG2 antvel: Computed apparent RA = 22:10:28.0 Dec = +04:54:45.5 2008-Oct-03 21:41:52 LOG2 antvel: Parameters to Doppler: Topocentric 92512 2008 277 0.0 2008-Oct-03 21:41:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Oct-03 21:41:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Oct-03 21:41:52 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Oct-03 21:41:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Oct-03 21:41:52 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Oct-03 21:41:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-03 21:41:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:41:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Oct-03 21:41:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Oct-03 21:41:52 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Oct-03 21:41:52 LOG5 log_alfabeam: Parameters: 22.166666666666668 4.8666666666666671 22.122341 2008.760859887951 18.999933 2008-Oct-03 21:41:52 LOG4 log_alfabeam: ALFABEAM 0 22.166666666666643 4.866666666666666 2008-Oct-03 21:41:52 LOG4 log_alfabeam: ALFABEAM 1 22.165126486889271 4.970280731731925 2008-Oct-03 21:41:52 LOG4 log_alfabeam: ALFABEAM 2 22.160778952290130 4.896887384123221 2008-Oct-03 21:41:52 LOG4 log_alfabeam: ALFABEAM 3 22.162290702160337 4.793165441931984 2008-Oct-03 21:41:52 LOG4 log_alfabeam: ALFABEAM 4 22.168224075176532 4.763088523445670 2008-Oct-03 21:41:52 LOG4 log_alfabeam: ALFABEAM 5 22.172581093217030 4.837001998836349 2008-Oct-03 21:41:52 LOG4 log_alfabeam: ALFABEAM 6 22.170995294239873 4.940469436483370 2008-Oct-03 21:41:52 INFO2 take_data: Starting WAPP+GALFA scan: 827700073 2008-Oct-03 21:41:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Oct-03 21:41:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Oct-03 21:41:53 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Oct-03 21:41:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Oct-03 21:41:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Oct-03 21:41:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Oct-03 21:41:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:41:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Oct-03 21:41:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6114.00 2008-Oct-03 21:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Oct-03 21:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Oct-03 21:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Oct-03 21:41:55 LOG