2010-May-05 18:58:18 BEGIN executive: CIMA executive starting ... 2010-May-05 18:58:18 NOTE executive: STARTING NEW CIMA SESSION 2010-May-05 18:58:18 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-May-05 18:58:18 INFO4 executive: This is an ON-LINE session 2010-May-05 18:58:18 INFO4 executive: This is a REMOTE session 2010-May-05 18:58:18 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-May-05 18:58:18 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Betsey Adams' 2010-May-05 18:58:18 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20100505' 2010-May-05 18:58:19 LOG2 log_preferences: Currently applied preferences: 2010-May-05 18:58:19 LOG2 log_preferences: prefs(dailylog) = daily 2010-May-05 18:58:19 LOG2 log_preferences: prefs(offlinelog) = skip 2010-May-05 18:58:19 LOG2 log_preferences: prefs(datawindow) = open 2010-May-05 18:58:19 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-May-05 18:58:19 LOG2 log_preferences: prefs(wappfailure) = abort 2010-May-05 18:58:19 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-May-05 18:58:19 LOG2 log_preferences: prefs(logcolours) = full 2010-May-05 18:58:19 LOG2 log_preferences: prefs(displaylevel) = INFO5 2010-May-05 18:58:19 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-May-05 18:58:19 LOG2 log_preferences: prefs(displayformat) = long 2010-May-05 18:58:19 LOG2 log_preferences: prefs(logformat) = new 2010-May-05 18:58:19 LOG2 log_preferences: prefs(fontsize) = 3 2010-May-05 18:58:19 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-May-05 18:58:19 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2010-May-05 18:58:19 ALERT executive: CIMA executive ready 2010-May-05 18:58:21 NOTE frontend: CIMA frontend ready 2010-May-05 18:58:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:22 LOG4 got_cormsg: From DATATAKING: setup 2010-May-05 18:58:24 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-May-05 18:58:24 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-May-05 18:58:24 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-May-05 18:58:24 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-May-05 18:58:24 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-05 18:58:24 NOTE select_receiver: Starting to select receiver ALFA 2010-May-05 18:58:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-May-05 18:58:24 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-May-05 18:58:24 LOG3 vw_send: To DATATAKING: acvlbical off 2010-May-05 18:58:24 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-May-05 18:58:24 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-May-05 18:58:24 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-05 18:58:24 DONE finish_task: DONE finished selecting: receiver ALFA 2010-May-05 18:58:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-05 18:58:24 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-May-05 18:58:24 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-05 18:58:28 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-May-05 18:58:28 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-May-05 18:58:28 LOG4 got_cormsg: From DATATAKING: vw% io 2010-May-05 18:58:28 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-May-05 18:58:28 LOG4 got_cormsg: From DATATAKING: 2010-May-05 18:58:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:28 LOG4 got_cormsg: From DATATAKING: tape stat 2010-May-05 18:58:28 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-May-05 18:58:28 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:38 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2010.conf' 2010-May-05 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-05 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-05 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-05 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-05 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-05 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-May-05 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-05 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-May-05 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-May-05 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-05 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-05 18:58:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-05 18:58:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-05 18:58:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-05 18:58:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-05 18:58:40 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-May-05 18:58:40 LOG4 exec_msg: From OBSERVER: config_iflo 2010-May-05 18:58:40 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-05 18:58:40 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-May-05 18:58:40 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-05 18:58:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-05 18:58:40 INFO1 config_iflo: Selecting receiver ALFA 2010-May-05 18:58:40 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-May-05 18:58:40 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-May-05 18:58:40 START begin_task: Starting task 'selecting receiver ALFA' 2010-May-05 18:58:40 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-May-05 18:58:40 NOTE select_receiver: Starting to select receiver ALFA 2010-May-05 18:58:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-May-05 18:58:40 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-May-05 18:58:40 LOG3 vw_send: To DATATAKING: acvlbical off 2010-May-05 18:58:40 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-May-05 18:58:40 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-May-05 18:58:40 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-May-05 18:58:40 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-May-05 18:58:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 18:58:40 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-May-05 18:58:40 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-May-05 18:58:40 START begin_task: Starting task 'waiting for receiver ALFA' 2010-May-05 18:58:40 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-May-05 18:58:40 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-May-05 18:58:40 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-May-05 18:58:40 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-May-05 18:58:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-May-05 18:58:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 18:58:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 18:58:40 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 18:58:40 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-May-05 18:58:40 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-May-05 18:58:40 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-May-05 18:58:40 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 18:58:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 18:58:40 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-May-05 18:58:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 18:58:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 18:58:40 LOG3 vw_send: To DATATAKING: alfafb 1 2010-May-05 18:58:40 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-May-05 18:58:40 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-05 18:58:40 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-05 18:58:40 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-May-05 18:58:40 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-May-05 18:58:40 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-May-05 18:58:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-05 18:58:40 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-May-05 18:58:40 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-May-05 18:58:41 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-05 18:58:41 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-05 18:58:41 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-05 18:58:41 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-05 18:58:41 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-05 18:58:41 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-May-05 18:58:41 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-May-05 18:58:41 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-May-05 18:58:41 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-May-05 18:58:41 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-May-05 18:58:41 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-May-05 18:58:41 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-May-05 18:58:41 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-05 18:58:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-05 18:58:41 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-May-05 18:58:41 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-May-05 18:58:41 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-05 18:58:41 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-May-05 18:58:41 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-May-05 18:58:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-05 18:58:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 18:58:41 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-05 18:58:41 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-May-05 18:58:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 18:58:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:56 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 18:58:56 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-05 18:58:56 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2010-May-05 18:58:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-05 18:58:56 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-05 18:58:56 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-May-05 18:58:56 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-05 18:58:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-05 18:58:56 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-05 18:58:56 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-May-05 18:58:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-05 18:58:57 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-May-05 18:58:57 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-May-05 18:58:57 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-05 18:58:57 LOG5 begin_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2010-May-05 18:58:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-05 18:58:57 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-05 18:58:57 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-05 18:58:57 START begin_task: Starting task 'selecting calibration port' 2010-May-05 18:58:57 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2010-May-05 18:58:57 LOG3 vw_send: To DATATAKING: calport 3 2010-May-05 18:58:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-05 18:58:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 18:58:57 START begin_task: Starting task 'waiting on calport' 2010-May-05 18:58:57 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-May-05 18:58:57 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2010-May-05 18:58:57 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-05 18:58:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 18:58:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:57 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 18:58:57 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-05 18:58:57 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-May-05 18:58:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-05 18:58:57 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-05 18:58:57 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2010-May-05 18:58:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 18:58:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 18:58:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 18:58:57 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2010-May-05 18:58:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 18:58:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:58:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 18:58:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 18:58:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 18:58:57 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2010-May-05 18:58:57 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 18:58:58 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-05 18:58:58 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-05 18:58:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 18:58:58 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2010-May-05 18:58:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 18:58:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 18:58:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 18:58:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 18:58:58 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 18:58:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 18:58:58 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-05 18:58:58 LOG5 finish_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2010-May-05 18:58:58 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-05 18:58:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-05 18:58:58 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-05 18:58:58 LOG5 end_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2010-May-05 18:58:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 18:58:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-05 18:58:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-05 18:58:58 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2010-May-05 18:58:58 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2010-May-05 18:58:58 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-May-05 18:58:59 LOG5 begin_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2010-May-05 18:58:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-May-05 18:58:59 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-May-05 18:58:59 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-May-05 18:58:59 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-May-05 18:58:59 LOG5 finish_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2010-May-05 18:58:59 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-May-05 18:58:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-05 18:58:59 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-May-05 18:58:59 LOG5 end_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2010-May-05 18:58:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 18:58:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0009.fits 2010-May-05 18:58:59 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20100505.a2010.0009.fits} 2010-May-05 18:59:00 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2010.conf' applied. 2010-May-05 18:59:16 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-May-05 18:59:16 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-May-05 18:59:16 LOG5 restart_wapp: Calling 'restart_wapp' 2010-May-05 18:59:16 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-May-05 18:59:16 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2010-May-05 18:59:16 NOTE restart_wapp: Restarting all WAPPs 2010-May-05 18:59:16 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-May-05 18:59:16 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-May-05 18:59:16 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2010-May-05 18:59:16 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-05 18:59:16 LOG3 exec_msg: Closing socket 2010-May-05 18:59:16 LOG3 exec_msg: Closing socket 2010-May-05 18:59:16 LOG3 exec_msg: Closing socket 2010-May-05 18:59:16 LOG3 exec_msg: Closing socket 2010-May-05 18:59:18 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-May-05 18:59:18 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-May-05 18:59:19 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-May-05 18:59:19 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-May-05 18:59:29 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2010.conf' 2010-May-05 18:59:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-05 18:59:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-05 18:59:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-05 18:59:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-05 18:59:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-05 18:59:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-May-05 18:59:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-05 18:59:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-05 18:59:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-05 18:59:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-05 18:59:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-05 18:59:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-05 18:59:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-05 18:59:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-05 18:59:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-05 18:59:31 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-May-05 18:59:31 LOG4 exec_msg: From OBSERVER: config_iflo 2010-May-05 18:59:31 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-05 18:59:31 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-May-05 18:59:31 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-05 18:59:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-05 18:59:31 LOG1 config_iflo: Receiver ALFA already selected 2010-May-05 18:59:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 18:59:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 18:59:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 18:59:31 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-May-05 18:59:31 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 18:59:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 18:59:31 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-May-05 18:59:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 18:59:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 18:59:31 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-May-05 18:59:31 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-05 18:59:31 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-May-05 18:59:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-May-05 18:59:31 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-05 18:59:31 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-05 18:59:31 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-05 18:59:31 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-05 18:59:31 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-May-05 18:59:31 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-05 18:59:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-May-05 18:59:31 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-May-05 18:59:31 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-May-05 18:59:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-05 18:59:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 18:59:31 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-05 18:59:31 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-May-05 18:59:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-05 18:59:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-05 18:59:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 18:59:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:59:31 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-May-05 18:59:31 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-05 18:59:31 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-May-05 18:59:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-05 18:59:31 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-05 18:59:31 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-May-05 18:59:31 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-05 18:59:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-05 18:59:31 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-05 18:59:31 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-May-05 18:59:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:59:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-05 18:59:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-05 18:59:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-05 18:59:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-05 18:59:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-05 18:59:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-05 18:59:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-05 18:59:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-05 18:59:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-05 18:59:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-05 18:59:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-05 18:59:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-05 18:59:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-05 18:59:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-05 18:59:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-05 18:59:32 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-May-05 18:59:32 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-May-05 18:59:32 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-05 18:59:32 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2010-May-05 18:59:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-05 18:59:32 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-05 18:59:32 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-05 18:59:32 START begin_task: Starting task 'selecting calibration port' 2010-May-05 18:59:32 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-May-05 18:59:32 LOG3 vw_send: To DATATAKING: calport 3 2010-May-05 18:59:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-05 18:59:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 18:59:32 START begin_task: Starting task 'waiting on calport' 2010-May-05 18:59:32 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-May-05 18:59:32 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2010-May-05 18:59:32 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-05 18:59:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 18:59:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:59:32 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 18:59:32 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-05 18:59:32 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-May-05 18:59:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-05 18:59:32 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-05 18:59:32 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-May-05 18:59:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 18:59:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 18:59:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 18:59:32 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2010-May-05 18:59:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 18:59:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 18:59:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 18:59:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 18:59:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 18:59:32 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2010-May-05 18:59:32 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-05 18:59:32 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-05 18:59:32 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-05 18:59:32 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-05 18:59:32 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-05 18:59:32 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-05 18:59:32 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-05 18:59:32 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-05 18:59:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 18:59:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 18:59:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 18:59:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 18:59:33 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-05 18:59:33 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-05 18:59:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 18:59:33 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-May-05 18:59:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 18:59:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 18:59:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 18:59:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 18:59:33 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-May-05 18:59:33 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-May-05 18:59:33 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-05 18:59:33 LOG5 finish_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2010-May-05 18:59:33 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-05 18:59:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-05 18:59:33 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-05 18:59:33 LOG5 end_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2010-May-05 18:59:33 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-05 18:59:33 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2010-May-05 18:59:33 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2010-May-05 18:59:33 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-May-05 18:59:33 LOG5 begin_task: Level: (1) ID = <10022> Status = 0 0 0 0 ok 2010-May-05 18:59:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-May-05 18:59:33 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-May-05 18:59:33 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-May-05 18:59:33 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-May-05 18:59:33 LOG5 finish_task: Level: (1) ID = <10022> Status = 0 0 0 0 ok 2010-May-05 18:59:33 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-May-05 18:59:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-05 18:59:33 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-May-05 18:59:33 LOG5 end_task: Level: (1) ID = <10022> Status = 0 0 0 0 ok 2010-May-05 18:59:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-05 18:59:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-05 18:59:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 18:59:34 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2010.conf' applied. 2010-May-05 18:59:45 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-05 18:59:45 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-May-05 18:59:57 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2010-May-05 18:59:57 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2010-May-05 18:59:57 BEGIN begin_task: Starting task 'adjusting WAPP power' 2010-May-05 18:59:57 LOG5 begin_task: Level: (1) ID = <10023> Status = 0 0 0 0 ok 2010-May-05 18:59:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-May-05 18:59:57 INFO2 adjust_power: Starting to adjust WAPP power 2010-May-05 18:59:57 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-05 18:59:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-05 18:59:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 18:59:57 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-05 18:59:57 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-May-05 18:59:57 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-05 18:59:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:00:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:00:00 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 19:00:00 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-05 19:00:00 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-May-05 19:00:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-05 19:00:00 START begin_task: Starting task 'adjusting WAPP power' 2010-May-05 19:00:00 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2010-May-05 19:00:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-05 19:00:00 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-05 19:00:00 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-05 19:00:00 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-05 19:00:00 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-05 19:00:00 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-05 19:00:00 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-May-05 19:00:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-05 19:00:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:00:00 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-05 19:00:00 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-May-05 19:00:00 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 3 dB --- beam 3: 3 3 dB 2010-May-05 19:00:00 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2010-May-05 19:00:00 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-05 19:00:00 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-05 19:00:00 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-May-05 19:00:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.900 0.892 ALFA beam 1: 0.955 0.979 2010-May-05 19:00:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.916 1.088 ALFA beam 3: 1.040 0.939 2010-May-05 19:00:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.014 0.832 ALFA beam 5: 1.068 0.940 2010-May-05 19:00:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.090 0.830 ALFA beam 7: 0.949 0.972 2010-May-05 19:00:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-05 19:00:01 LOG5 finish_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2010-May-05 19:00:01 INFO2 finish_task: DONE finished adjusting: WAPP power 2010-May-05 19:00:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 19:00:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-05 19:00:01 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2010-May-05 19:00:01 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2010-May-05 19:00:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-05 19:00:01 LOG5 finish_task: Level: (1) ID = <10023> Status = 0 0 0 0 ok 2010-May-05 19:00:01 DONE finish_task: DONE finished adjusting: WAPP power levels 2010-May-05 19:00:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-05 19:00:01 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-05 19:00:01 LOG5 end_task: Level: (1) ID = <10023> Status = 0 0 0 0 ok 2010-May-05 19:00:03 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2010-May-05 19:00:03 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift111p3 092800.0 +264939 J 0 Topocentric velocity(optical) 2010-May-05 19:00:03 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift111p3 092800.0 +264939 J 0 Topocentric velocity(optical)' 2010-May-05 19:00:03 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-05 19:00:03 LOG5 begin_task: Level: (1) ID = <10027> Status = 0 0 0 0 ok 2010-May-05 19:00:03 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'Strip16' 2010-May-05 19:00:03 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-05 19:00:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift111p3} 2010-May-05 19:00:03 INFO5 fixed_driftmap: Start: year = 2010.3443989086622 RA = 09:28:37.4 Dec = +26:46:55.8 2010-May-05 19:00:03 NOTE fixed_driftmap: Setting ZA to 8:25:42.1 ... 2010-May-05 19:00:03 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 8.43 2010-May-05 19:00:03 LOG3 track_source: Calling 'track_source drift111p3 180.0 8.4283551566 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-May-05 19:00:03 START begin_task: Starting task 'sending tracking commands' 2010-May-05 19:00:03 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2010-May-05 19:00:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift111p3} INFO {Slewing to source 'drift111p3' ...} 2010-May-05 19:00:03 INFO1 track_source: Starting to track drift111p3 2010-May-05 19:00:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift111p3" 2010-May-05 19:00:04 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-May-05 19:00:04 LOG3 vw_send: To DATATAKING: set dec 8.4283551566 2010-May-05 19:00:04 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-05 19:00:04 LOG3 vw_send: To DATATAKING: pnt tr 180.0 8.4283551566 -CF 2010-May-05 19:00:04 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-May-05 19:00:04 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-05 19:00:04 LOG5 finish_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2010-May-05 19:00:04 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-05 19:00:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 19:00:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-05 19:00:04 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2010-May-05 19:00:04 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-May-05 19:00:04 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-May-05 19:00:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-May-05 19:00:04 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-May-05 19:00:04 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2010-May-05 19:00:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-05 19:00:04 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-05 19:00:04 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-May-05 19:00:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift111p3" 2010-May-05 19:00:04 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-May-05 19:00:04 LOG4 got_cormsg: From DATATAKING: set dec 8.4283551566 2010-May-05 19:00:04 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-May-05 19:00:04 LOG4 got_cormsg: From DATATAKING: vw% 8.4283551566 2010-May-05 19:00:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:00:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-05 19:00:04 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 8.4283551566 -CF 2010-May-05 19:00:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-May-05 19:00:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-05 19:00:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:00:05 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-05 19:00:05 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-May-05 19:00:05 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-05 19:00:05 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-May-05 19:00:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-05 19:00:05 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-May-05 19:00:05 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-May-05 19:00:05 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-May-05 19:00:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 19:00:05 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-May-05 19:00:05 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-May-05 19:00:05 START begin_task: Starting task 'waiting on telescope' 2010-May-05 19:00:05 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-May-05 19:00:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-05 19:00:05 LOG3 waittrk: Start waittrk 5 2010-May-05 19:00:05 START begin_task: Starting task 'waiting on telescope movement' 2010-May-05 19:00:05 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2010-May-05 19:00:10 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-05 19:00:10 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2010-May-05 19:00:10 START begin_task: Starting task 'waiting on telescope on source' 2010-May-05 19:00:10 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-May-05 19:00:20 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-05 19:00:20 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-May-05 19:00:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-05 19:00:20 INFO2 waittrk: Now tracking drift111p3 2010-May-05 19:00:20 LOG4 waittrk: Current telescope position: Az = 179.74 ZA = 8.45 2010-May-05 19:00:20 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-05 19:00:20 LOG5 finish_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-May-05 19:00:20 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-05 19:00:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 19:00:20 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-05 19:00:20 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-May-05 19:00:20 START begin_task: Starting task 'selecting calibration type' 2010-May-05 19:00:20 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2010-May-05 19:00:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 19:00:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 19:00:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:00:20 START begin_task: Starting task 'waiting on setcal' 2010-May-05 19:00:20 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-May-05 19:00:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 19:00:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:00:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:00:21 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 19:00:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 19:00:21 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-May-05 19:00:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 19:00:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 19:00:21 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 19:00:21 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 19:00:21 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2010-May-05 19:00:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:00:21 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 19:00:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 19:00:21 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2010-May-05 19:00:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 19:00:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 19:00:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 19:00:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 19:00:21 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 19:00:21 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-May-05 19:00:21 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 19:00:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 19:00:21 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-May-05 19:00:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 19:00:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 19:00:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 19:00:21 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2010-May-05 19:00:21 LOG5 dopset_later: Calling 'dopset_later 29.349674485433759' 2010-May-05 19:00:21 INFO3 dopset_later: Setting Doppler correction for 19:00:49 (29.3 seconds from now) 2010-May-05 19:00:21 LOG5 antvel: Calling 'antvel 180.000000 8.428355 F Topocentric 29.349674485433759' 2010-May-05 19:00:21 LOG2 antvel: Transforming current Az = 180.00 ZA = 8.43 to apparent RA = 09:28:37.3 Dec = +26:46:55.8 2010-May-05 19:00:21 LOG2 antvel: Parameters to Doppler: Topocentric 82849 2010 125 0.0 2010-May-05 19:00:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-05 19:00:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-May-05 19:00:21 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-May-05 19:00:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-05 19:00:21 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-05 19:00:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-05 19:00:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-05 19:00:21 START begin_task: Starting task 'adjusting WAPP power' 2010-May-05 19:00:21 LOG5 begin_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2010-May-05 19:00:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-May-05 19:00:21 INFO2 adjust_power: Starting to adjust WAPP power 2010-May-05 19:00:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-05 19:00:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-05 19:00:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:00:21 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-05 19:00:21 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-May-05 19:00:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-05 19:00:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-05 19:00:21 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-05 19:00:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:00:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:00:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:00:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:00:24 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 19:00:24 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-05 19:00:24 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-May-05 19:00:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-05 19:00:24 START begin_task: Starting task 'adjusting WAPP power' 2010-May-05 19:00:24 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-May-05 19:00:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-05 19:00:24 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-05 19:00:24 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-05 19:00:24 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-05 19:00:24 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-05 19:00:24 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-05 19:00:24 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2010-May-05 19:00:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-05 19:00:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:00:24 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-05 19:00:24 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-May-05 19:00:24 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 3 dB --- beam 3: 3 3 dB 2010-May-05 19:00:24 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2010-May-05 19:00:24 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-05 19:00:24 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-05 19:00:24 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2010-May-05 19:00:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.921 0.894 ALFA beam 1: 0.958 0.979 2010-May-05 19:00:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.927 1.114 ALFA beam 3: 1.060 0.961 2010-May-05 19:00:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.033 0.853 ALFA beam 5: 1.071 0.944 2010-May-05 19:00:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.118 0.857 ALFA beam 7: 0.963 1.001 2010-May-05 19:00:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-05 19:00:24 LOG5 finish_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-May-05 19:00:24 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-05 19:00:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 19:00:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-05 19:00:25 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-May-05 19:00:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 19:00:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-05 19:00:25 LOG5 finish_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2010-May-05 19:00:25 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-May-05 19:00:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 19:00:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-05 19:00:25 LOG5 end_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2010-May-05 19:00:25 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:28:37.4 LST = 09:28:11.9 diff = 25.4 secs 2010-May-05 19:00:25 INFO2 fixed_driftmap: Waiting 23.4 seconds for RA 9:28:37 2010-May-05 19:00:25 INFO2 lstwait: Waiting for 23.4 secs from LST 09:28:12 to LST 09:28:35 ... 2010-May-05 19:00:25 LOG4 send_obs_status: To obs_status: <1> TASKTIME 23.355685281595626 BITMAP stat_wait MESSAGE {Waiting ...} 2010-May-05 19:00:25 START begin_task: Starting task 'waiting on wait on LST' 2010-May-05 19:00:25 LOG5 begin_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2010-May-05 19:00:48 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-May-05 19:00:48 LOG5 end_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2010-May-05 19:00:48 LOG4 lstwait: Finished waiting 0.65 seconds late 2010-May-05 19:00:48 INFO3 lstwait: Finished waiting 2010-May-05 19:00:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-05 19:00:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 19:00:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 19:00:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 19:00:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 19:00:48 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100505.a2010.0009.fits' is empty! 2010-May-05 19:00:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2010-May-05 19:00:48 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-05 19:00:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 19:00:48 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 19:00:48 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 19:00:48 LOG5 begin_task: Level: (2) ID = <10043> Status = 0 0 0 0 ok 2010-May-05 19:00:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 19:00:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 19:00:48 INFO2 take_data: Starting WAPP 600-second scan: 12500101 2010-May-05 19:00:49 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 19:00:49 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2010-May-05 19:00:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 19:00:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 19:00:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 19:00:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82850.00 2010-May-05 19:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 19:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:05:57 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:05:57.300 (seconds: 68757.300)!} 2010-May-05 19:05:57 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:05:57.300 (seconds: 68757.300)! 2010-May-05 19:05:58 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 68756.0 to 68757.0! 2010-May-05 19:05:59 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (68756.0 - 68758.0)! 2010-May-05 19:10:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 19:10:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 19:10:50 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2010-May-05 19:10:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 19:10:50 LOG5 end_task: Level: (2) ID = <10043> Status = 0 0 0 0 ok 2010-May-05 19:10:50 LOG1 fixed_driftmap: New position: year = 2010.3444194108552 RA = 09:38:03.4 RA/Dec = 09:38:40.6 +26:46:50.1 2010-May-05 19:10:50 NOTE fixed_driftmap: Correcting ZA to 8:25:36.4 ... 2010-May-05 19:10:50 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4267666167 -CF 2010-May-05 19:10:50 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 19:10:50 START begin_task: Starting task 'WAPP calibration' 2010-May-05 19:10:50 LOG5 begin_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2010-May-05 19:10:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 19:10:50 START begin_task: Starting task 'selecting calibration type' 2010-May-05 19:10:50 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-May-05 19:10:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 19:10:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 19:10:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:10:50 START begin_task: Starting task 'waiting on setcal' 2010-May-05 19:10:50 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2010-May-05 19:10:50 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4267666167 -CF 2010-May-05 19:10:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:10:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 19:10:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:10:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:10:50 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 19:10:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 19:10:50 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2010-May-05 19:10:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 19:10:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 19:10:50 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 19:10:50 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 19:10:50 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-May-05 19:10:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:10:51 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 19:10:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 19:10:51 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-May-05 19:10:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 19:10:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 19:10:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 19:10:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 19:10:51 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 19:10:51 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2010-May-05 19:10:51 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 19:10:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 19:10:51 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2010-May-05 19:10:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 19:10:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 19:10:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 19:10:51 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-May-05 19:10:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 19:10:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 19:10:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 19:10:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 19:10:51 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-May-05 19:10:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 19:10:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 19:10:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 19:10:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 19:10:51 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-May-05 19:10:51 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 19:10:51 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 19:10:51 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-May-05 19:10:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 19:10:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 19:10:51 INFO2 take_data: Starting WAPP 1-second scan: 12500102 2010-May-05 19:10:51 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 19:10:51 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-May-05 19:10:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 19:10:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 19:10:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83452.00 2010-May-05 19:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 19:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 19:10:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 19:10:53 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-May-05 19:10:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 19:10:53 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-May-05 19:10:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 19:10:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 19:10:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 19:10:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 19:10:53 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-May-05 19:10:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 19:10:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 19:10:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 19:10:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 19:10:53 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-May-05 19:10:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 19:10:53 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 19:10:53 LOG5 finish_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2010-May-05 19:10:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 19:10:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 19:10:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 19:10:53 LOG5 end_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2010-May-05 19:10:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2010-May-05 19:10:54 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-May-05 19:10:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 19:10:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 19:10:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 19:10:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 19:10:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 19:10:54 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 19:10:54 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 19:10:54 LOG5 begin_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2010-May-05 19:10:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 19:10:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 19:10:54 INFO2 take_data: Starting WAPP 600-second scan: 12500103 2010-May-05 19:10:54 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 19:10:54 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-May-05 19:10:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 19:10:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 19:10:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 19:10:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83455.00 2010-May-05 19:10:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0010.fits 2010-May-05 19:10:54 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0010.fits} 2010-May-05 19:10:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 19:10:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:10:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:20:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 19:20:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 19:20:55 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-May-05 19:20:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 19:20:55 LOG5 end_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2010-May-05 19:20:55 LOG1 fixed_driftmap: New position: year = 2010.3444385821483 RA = 09:48:10.3 RA/Dec = 09:48:47.3 +26:46:44.6 2010-May-05 19:20:55 NOTE fixed_driftmap: Correcting ZA to 8:25:30.9 ... 2010-May-05 19:20:55 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4252574895 -CF 2010-May-05 19:20:55 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 19:20:55 START begin_task: Starting task 'WAPP calibration' 2010-May-05 19:20:55 LOG5 begin_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2010-May-05 19:20:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 19:20:55 START begin_task: Starting task 'selecting calibration type' 2010-May-05 19:20:55 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2010-May-05 19:20:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 19:20:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 19:20:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:20:55 START begin_task: Starting task 'waiting on setcal' 2010-May-05 19:20:55 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2010-May-05 19:20:55 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4252574895 -CF 2010-May-05 19:20:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:20:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 19:20:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:20:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:20:55 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 19:20:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 19:20:55 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2010-May-05 19:20:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 19:20:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 19:20:55 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 19:20:55 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 19:20:55 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-May-05 19:20:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:20:56 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 19:20:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 19:20:56 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-May-05 19:20:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 19:20:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 19:20:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 19:20:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 19:20:56 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 19:20:56 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2010-May-05 19:20:56 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 19:20:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 19:20:56 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2010-May-05 19:20:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 19:20:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 19:20:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 19:20:56 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2010-May-05 19:20:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 19:20:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 19:20:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 19:20:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 19:20:56 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-May-05 19:20:56 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 19:20:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 19:20:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 19:20:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 19:20:56 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-May-05 19:20:56 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 19:20:56 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 19:20:56 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-May-05 19:20:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 19:20:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 19:20:56 INFO2 take_data: Starting WAPP 1-second scan: 12500104 2010-May-05 19:20:56 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 19:20:56 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-May-05 19:20:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 19:20:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 19:20:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84057.00 2010-May-05 19:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 19:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:20:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 19:20:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 19:20:58 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-May-05 19:20:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 19:20:58 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-May-05 19:20:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 19:20:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 19:20:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 19:20:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 19:20:58 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-May-05 19:20:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 19:20:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 19:20:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 19:20:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 19:20:58 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-May-05 19:20:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 19:20:58 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 19:20:58 LOG5 finish_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2010-May-05 19:20:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 19:20:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 19:20:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 19:20:58 LOG5 end_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2010-May-05 19:20:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2010-May-05 19:20:58 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2010-May-05 19:20:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 19:20:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 19:20:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 19:20:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 19:20:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 19:20:59 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 19:20:59 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 19:20:59 LOG5 begin_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2010-May-05 19:20:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 19:20:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 19:20:59 INFO2 take_data: Starting WAPP 600-second scan: 12500105 2010-May-05 19:20:59 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 19:20:59 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-May-05 19:20:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 19:20:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 19:20:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 19:20:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84060.00 2010-May-05 19:20:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0011.fits 2010-May-05 19:20:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0011.fits} 2010-May-05 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 19:31:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 19:31:00 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-May-05 19:31:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 19:31:00 LOG5 end_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2010-May-05 19:31:00 LOG1 fixed_driftmap: New position: year = 2010.3444577534415 RA = 09:58:17.2 RA/Dec = 09:58:53.9 +26:46:39.5 2010-May-05 19:31:00 NOTE fixed_driftmap: Correcting ZA to 8:25:25.8 ... 2010-May-05 19:31:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4238399144 -CF 2010-May-05 19:31:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 19:31:00 START begin_task: Starting task 'WAPP calibration' 2010-May-05 19:31:00 LOG5 begin_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2010-May-05 19:31:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 19:31:00 START begin_task: Starting task 'selecting calibration type' 2010-May-05 19:31:00 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-May-05 19:31:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 19:31:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 19:31:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:31:00 START begin_task: Starting task 'waiting on setcal' 2010-May-05 19:31:00 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2010-May-05 19:31:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4238399144 -CF 2010-May-05 19:31:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:31:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 19:31:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:31:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:31:00 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 19:31:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 19:31:00 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2010-May-05 19:31:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 19:31:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 19:31:00 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 19:31:00 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 19:31:00 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-May-05 19:31:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:31:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 19:31:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 19:31:01 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-May-05 19:31:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 19:31:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 19:31:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 19:31:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 19:31:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 19:31:01 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2010-May-05 19:31:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 19:31:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 19:31:01 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2010-May-05 19:31:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 19:31:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 19:31:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 19:31:01 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-May-05 19:31:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 19:31:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 19:31:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 19:31:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 19:31:01 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2010-May-05 19:31:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 19:31:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 19:31:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 19:31:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 19:31:01 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2010-May-05 19:31:01 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 19:31:01 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 19:31:01 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-May-05 19:31:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 19:31:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 19:31:01 INFO2 take_data: Starting WAPP 1-second scan: 12500106 2010-May-05 19:31:01 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 19:31:01 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-May-05 19:31:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 19:31:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 19:31:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84662.00 2010-May-05 19:31:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 19:31:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 19:31:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 19:31:03 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-May-05 19:31:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 19:31:03 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-May-05 19:31:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 19:31:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 19:31:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 19:31:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 19:31:03 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-May-05 19:31:04 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 19:31:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 19:31:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 19:31:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 19:31:04 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-May-05 19:31:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 19:31:04 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 19:31:04 LOG5 finish_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2010-May-05 19:31:04 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 19:31:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 19:31:04 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 19:31:04 LOG5 end_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2010-May-05 19:31:04 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2010-May-05 19:31:04 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2010-May-05 19:31:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 19:31:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 19:31:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 19:31:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 19:31:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 19:31:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 19:31:04 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 19:31:04 LOG5 begin_task: Level: (2) ID = <10076> Status = 0 0 0 0 ok 2010-May-05 19:31:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 19:31:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 19:31:04 INFO2 take_data: Starting WAPP 600-second scan: 12500107 2010-May-05 19:31:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 19:31:04 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-May-05 19:31:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 19:31:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 19:31:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 19:31:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84665.00 2010-May-05 19:31:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0012.fits 2010-May-05 19:31:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0012.fits} 2010-May-05 19:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 19:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:35:55 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:35:55.302 (seconds: 70555.302)!} 2010-May-05 19:35:55 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:35:55.302 (seconds: 70555.302)! 2010-May-05 19:35:56 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 70554.0 to 70555.0! 2010-May-05 19:35:57 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (70554.0 - 70556.0)! 2010-May-05 19:41:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 19:41:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 19:41:05 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-May-05 19:41:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 19:41:05 LOG5 end_task: Level: (2) ID = <10076> Status = 0 0 0 0 ok 2010-May-05 19:41:05 LOG1 fixed_driftmap: New position: year = 2010.3444769247344 RA = 10:08:24.0 RA/Dec = 10:09:00.6 +26:46:34.8 2010-May-05 19:41:05 NOTE fixed_driftmap: Correcting ZA to 8:25:21.1 ... 2010-May-05 19:41:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4225166615 -CF 2010-May-05 19:41:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 19:41:05 START begin_task: Starting task 'WAPP calibration' 2010-May-05 19:41:05 LOG5 begin_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2010-May-05 19:41:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 19:41:05 START begin_task: Starting task 'selecting calibration type' 2010-May-05 19:41:05 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-May-05 19:41:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 19:41:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 19:41:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:41:05 START begin_task: Starting task 'waiting on setcal' 2010-May-05 19:41:05 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-May-05 19:41:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4225166615 -CF 2010-May-05 19:41:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:41:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 19:41:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:41:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:41:06 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 19:41:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 19:41:06 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-May-05 19:41:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 19:41:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 19:41:06 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 19:41:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 19:41:06 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2010-May-05 19:41:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:41:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 19:41:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 19:41:07 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2010-May-05 19:41:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 19:41:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 19:41:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 19:41:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 19:41:07 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 19:41:07 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-May-05 19:41:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 19:41:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 19:41:07 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-May-05 19:41:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 19:41:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 19:41:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 19:41:07 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-May-05 19:41:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 19:41:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 19:41:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 19:41:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 19:41:07 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-May-05 19:41:07 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 19:41:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 19:41:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 19:41:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 19:41:07 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-May-05 19:41:07 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 19:41:07 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 19:41:07 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-May-05 19:41:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 19:41:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 19:41:07 INFO2 take_data: Starting WAPP 1-second scan: 12500108 2010-May-05 19:41:08 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 19:41:08 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-May-05 19:41:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 19:41:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 19:41:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85269.00 2010-May-05 19:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 19:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 19:41:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 19:41:10 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-May-05 19:41:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 19:41:10 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-May-05 19:41:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 19:41:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 19:41:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 19:41:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 19:41:10 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-May-05 19:41:10 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 19:41:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 19:41:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 19:41:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 19:41:10 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-May-05 19:41:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 19:41:10 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 19:41:10 LOG5 finish_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2010-May-05 19:41:10 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 19:41:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 19:41:10 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 19:41:10 LOG5 end_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2010-May-05 19:41:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2010-May-05 19:41:11 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2010-May-05 19:41:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 19:41:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 19:41:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 19:41:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 19:41:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 19:41:11 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 19:41:11 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 19:41:11 LOG5 begin_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2010-May-05 19:41:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 19:41:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 19:41:11 INFO2 take_data: Starting WAPP 600-second scan: 12500109 2010-May-05 19:41:11 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 19:41:11 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-May-05 19:41:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 19:41:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 19:41:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 19:41:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85272.00 2010-May-05 19:41:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0013.fits 2010-May-05 19:41:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0013.fits} 2010-May-05 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 19:51:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 19:51:12 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-May-05 19:51:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 19:51:12 LOG5 end_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2010-May-05 19:51:12 LOG1 fixed_driftmap: New position: year = 2010.3444961594039 RA = 10:18:32.9 RA/Dec = 10:19:09.2 +26:46:30.3 2010-May-05 19:51:12 NOTE fixed_driftmap: Correcting ZA to 8:25:16.6 ... 2010-May-05 19:51:12 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4212864197 -CF 2010-May-05 19:51:12 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 19:51:12 START begin_task: Starting task 'WAPP calibration' 2010-May-05 19:51:12 LOG5 begin_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2010-May-05 19:51:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 19:51:12 START begin_task: Starting task 'selecting calibration type' 2010-May-05 19:51:12 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-May-05 19:51:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 19:51:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 19:51:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:51:12 START begin_task: Starting task 'waiting on setcal' 2010-May-05 19:51:12 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-May-05 19:51:12 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4212864197 -CF 2010-May-05 19:51:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:51:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 19:51:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 19:51:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:51:12 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 19:51:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 19:51:12 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-May-05 19:51:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 19:51:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 19:51:12 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 19:51:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 19:51:12 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2010-May-05 19:51:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 19:51:13 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 19:51:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 19:51:13 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2010-May-05 19:51:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 19:51:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 19:51:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 19:51:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 19:51:13 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 19:51:13 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-May-05 19:51:13 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 19:51:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 19:51:13 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-May-05 19:51:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 19:51:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 19:51:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 19:51:13 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-May-05 19:51:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 19:51:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 19:51:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 19:51:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 19:51:13 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-May-05 19:51:13 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 19:51:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 19:51:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 19:51:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 19:51:13 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-May-05 19:51:13 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 19:51:13 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 19:51:13 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2010-May-05 19:51:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 19:51:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 19:51:13 INFO2 take_data: Starting WAPP 1-second scan: 12500110 2010-May-05 19:51:13 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 19:51:13 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2010-May-05 19:51:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 19:51:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 19:51:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85874.00 2010-May-05 19:51:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 19:51:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 19:51:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 19:51:15 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2010-May-05 19:51:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 19:51:15 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2010-May-05 19:51:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 19:51:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 19:51:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 19:51:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 19:51:15 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2010-May-05 19:51:15 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 19:51:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 19:51:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 19:51:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 19:51:15 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2010-May-05 19:51:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 19:51:15 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 19:51:15 LOG5 finish_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2010-May-05 19:51:15 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 19:51:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 19:51:15 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 19:51:15 LOG5 end_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2010-May-05 19:51:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2010-May-05 19:51:15 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2010-May-05 19:51:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 19:51:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 19:51:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 19:51:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 19:51:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 19:51:16 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 19:51:16 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 19:51:16 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2010-May-05 19:51:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 19:51:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 19:51:16 INFO2 take_data: Starting WAPP 600-second scan: 12500111 2010-May-05 19:51:16 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 19:51:16 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2010-May-05 19:51:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 19:51:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 19:51:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 19:51:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85877.00 2010-May-05 19:51:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0014.fits 2010-May-05 19:51:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0014.fits} 2010-May-05 19:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 19:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 19:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:00:01 ERROR WAPPDATA-search_pnt: ERROR data in pnt-table is too old! (55322.000000 > 55321.000000) 2010-May-05 20:00:01 ERROR WAPPDATA-compute_interp: ERROR can't interpolate positions at 00:00:00.000 --- using the last positions written to FITS-file! 2010-May-05 20:00:02 ERROR WAPPDATA-search_pnt: ERROR interpolation of pnt-data over a too large time gap attempted (55321.000000 - 55322.000012) --- cancelling interpolation attempt! 2010-May-05 20:00:02 ERROR WAPPDATA-interpolate: ERROR denominator is zero --- skipping interpolation! 2010-May-05 20:00:02 PROBLEM WAPPDATA-interpolate: Values: x = 55322.000012 x1 = 55322.000012 y1 = 10.466315002701 x2 = 55322.000012 y2 = 10.466315002701 2010-May-05 20:00:02 ERROR WAPPDATA-interpolate: ERROR denominator is zero --- skipping interpolation! 2010-May-05 20:00:02 PROBLEM WAPPDATA-interpolate: Values: x = 55322.000012 x1 = 55322.000012 y1 = 10.456543565714 x2 = 55322.000012 y2 = 10.456543565714 2010-May-05 20:00:02 ERROR WAPPDATA-interpolate: ERROR denominator is zero --- skipping interpolation! 2010-May-05 20:00:02 PROBLEM WAPPDATA-interpolate: Values: x = 55322.000012 x1 = 55322.000012 y1 = 26.828597066445 x2 = 55322.000012 y2 = 26.828597066445 2010-May-05 20:00:02 ERROR WAPPDATA-interpolate: ERROR denominator is zero --- skipping interpolation! 2010-May-05 20:00:02 PROBLEM WAPPDATA-interpolate: Values: x = 55322.000012 x1 = 55322.000012 y1 = -27530.014846752059 x2 = 55322.000012 y2 = -27530.014846752059 2010-May-05 20:00:02 ERROR WAPPDATA-interpolate: ERROR denominator is zero --- skipping interpolation! 2010-May-05 20:00:02 PROBLEM WAPPDATA-interpolate: Values: x = 55322.000012 x1 = 55322.000012 y1 = 0.012785796732 x2 = 55322.000012 y2 = 0.012785796732 2010-May-05 20:01:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 20:01:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 20:01:17 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2010-May-05 20:01:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 20:01:17 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2010-May-05 20:01:17 LOG1 fixed_driftmap: New position: year = 2010.344515330697 RA = 10:28:39.8 RA/Dec = 10:29:15.9 +26:46:26.3 2010-May-05 20:01:17 NOTE fixed_driftmap: Correcting ZA to 8:25:12.6 ... 2010-May-05 20:01:17 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4201596935 -CF 2010-May-05 20:01:17 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 20:01:17 START begin_task: Starting task 'WAPP calibration' 2010-May-05 20:01:17 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2010-May-05 20:01:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 20:01:17 START begin_task: Starting task 'selecting calibration type' 2010-May-05 20:01:17 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2010-May-05 20:01:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 20:01:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 20:01:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 20:01:17 START begin_task: Starting task 'waiting on setcal' 2010-May-05 20:01:17 LOG5 begin_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2010-May-05 20:01:17 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4201596935 -CF 2010-May-05 20:01:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:01:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 20:01:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 20:01:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:01:17 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 20:01:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 20:01:17 LOG5 end_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2010-May-05 20:01:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 20:01:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 20:01:17 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 20:01:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 20:01:17 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2010-May-05 20:01:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:01:18 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 20:01:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 20:01:18 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2010-May-05 20:01:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 20:01:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 20:01:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 20:01:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 20:01:18 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 20:01:18 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2010-May-05 20:01:18 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 20:01:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 20:01:18 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2010-May-05 20:01:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 20:01:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 20:01:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 20:01:18 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2010-May-05 20:01:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 20:01:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 20:01:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 20:01:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 20:01:18 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-May-05 20:01:18 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 20:01:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 20:01:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 20:01:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 20:01:18 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-May-05 20:01:18 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 20:01:18 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 20:01:18 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-May-05 20:01:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 20:01:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 20:01:18 INFO2 take_data: Starting WAPP 1-second scan: 12500112 2010-May-05 20:01:18 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 20:01:18 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2010-May-05 20:01:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 20:01:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 20:01:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 79.00 2010-May-05 20:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 20:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 20:01:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 20:01:20 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2010-May-05 20:01:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 20:01:20 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-May-05 20:01:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 20:01:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 20:01:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 20:01:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 20:01:20 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-May-05 20:01:20 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 20:01:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 20:01:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 20:01:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 20:01:20 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-May-05 20:01:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 20:01:20 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 20:01:20 LOG5 finish_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2010-May-05 20:01:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 20:01:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 20:01:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 20:01:20 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2010-May-05 20:01:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2010-May-05 20:01:20 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2010-May-05 20:01:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 20:01:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 20:01:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 20:01:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 20:01:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 20:01:21 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 20:01:21 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 20:01:21 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2010-May-05 20:01:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 20:01:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 20:01:21 INFO2 take_data: Starting WAPP 600-second scan: 12500113 2010-May-05 20:01:21 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 20:01:21 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2010-May-05 20:01:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 20:01:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 20:01:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 20:01:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82.00 2010-May-05 20:01:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0015.fits 2010-May-05 20:01:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0015.fits} 2010-May-05 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:05:53 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:05:53.304 (seconds: 72353.304)!} 2010-May-05 20:05:53 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:05:53.304 (seconds: 72353.304)! 2010-May-05 20:05:54 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 72352.0 to 72353.0! 2010-May-05 20:05:55 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (72352.0 - 72354.0)! 2010-May-05 20:11:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 20:11:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 20:11:22 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2010-May-05 20:11:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 20:11:22 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2010-May-05 20:11:22 LOG1 fixed_driftmap: New position: year = 2010.34453450199 RA = 10:38:46.7 RA/Dec = 10:39:22.6 +26:46:22.6 2010-May-05 20:11:22 NOTE fixed_driftmap: Correcting ZA to 8:25:08.9 ... 2010-May-05 20:11:22 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4191344519 -CF 2010-May-05 20:11:22 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 20:11:22 START begin_task: Starting task 'WAPP calibration' 2010-May-05 20:11:22 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-May-05 20:11:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 20:11:22 START begin_task: Starting task 'selecting calibration type' 2010-May-05 20:11:22 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2010-May-05 20:11:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 20:11:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 20:11:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 20:11:22 START begin_task: Starting task 'waiting on setcal' 2010-May-05 20:11:22 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2010-May-05 20:11:22 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4191344519 -CF 2010-May-05 20:11:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:11:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 20:11:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 20:11:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:11:22 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 20:11:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 20:11:22 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2010-May-05 20:11:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 20:11:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 20:11:22 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 20:11:22 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 20:11:22 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2010-May-05 20:11:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:11:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 20:11:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 20:11:23 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2010-May-05 20:11:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 20:11:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 20:11:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 20:11:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 20:11:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 20:11:23 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2010-May-05 20:11:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 20:11:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 20:11:23 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2010-May-05 20:11:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 20:11:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 20:11:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 20:11:23 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2010-May-05 20:11:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 20:11:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 20:11:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 20:11:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 20:11:23 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2010-May-05 20:11:23 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 20:11:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 20:11:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 20:11:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 20:11:23 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2010-May-05 20:11:23 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 20:11:23 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 20:11:23 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2010-May-05 20:11:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 20:11:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 20:11:23 INFO2 take_data: Starting WAPP 1-second scan: 12500114 2010-May-05 20:11:23 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 20:11:23 LOG5 begin_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2010-May-05 20:11:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 20:11:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 20:11:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 684.00 2010-May-05 20:11:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 20:11:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 20:11:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 20:11:25 LOG5 end_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2010-May-05 20:11:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 20:11:25 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2010-May-05 20:11:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 20:11:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 20:11:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 20:11:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 20:11:25 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-May-05 20:11:26 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 20:11:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 20:11:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 20:11:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 20:11:26 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-May-05 20:11:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 20:11:26 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 20:11:26 LOG5 finish_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-May-05 20:11:26 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 20:11:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 20:11:26 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 20:11:26 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-May-05 20:11:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2010-May-05 20:11:26 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2010-May-05 20:11:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 20:11:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 20:11:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 20:11:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 20:11:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 20:11:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 20:11:26 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 20:11:26 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-May-05 20:11:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 20:11:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 20:11:26 INFO2 take_data: Starting WAPP 600-second scan: 12500115 2010-May-05 20:11:26 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 20:11:26 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-May-05 20:11:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 20:11:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 20:11:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 20:11:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 687.00 2010-May-05 20:11:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0016.fits 2010-May-05 20:11:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0016.fits} 2010-May-05 20:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 20:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 20:21:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 20:21:27 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-May-05 20:21:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 20:21:27 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-May-05 20:21:27 LOG1 fixed_driftmap: New position: year = 2010.3445536732831 RA = 10:48:53.6 RA/Dec = 10:49:29.2 +26:46:19.3 2010-May-05 20:21:27 NOTE fixed_driftmap: Correcting ZA to 8:25:05.6 ... 2010-May-05 20:21:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4182127044 -CF 2010-May-05 20:21:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 20:21:27 START begin_task: Starting task 'WAPP calibration' 2010-May-05 20:21:27 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2010-May-05 20:21:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 20:21:27 START begin_task: Starting task 'selecting calibration type' 2010-May-05 20:21:27 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-May-05 20:21:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 20:21:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 20:21:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 20:21:27 START begin_task: Starting task 'waiting on setcal' 2010-May-05 20:21:27 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-May-05 20:21:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4182127044 -CF 2010-May-05 20:21:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:21:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 20:21:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 20:21:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:21:28 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 20:21:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 20:21:28 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-May-05 20:21:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 20:21:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 20:21:28 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 20:21:28 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 20:21:28 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-May-05 20:21:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:21:28 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 20:21:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 20:21:28 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-May-05 20:21:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 20:21:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 20:21:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 20:21:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 20:21:28 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 20:21:28 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2010-May-05 20:21:28 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 20:21:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 20:21:28 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2010-May-05 20:21:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 20:21:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 20:21:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 20:21:28 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-May-05 20:21:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 20:21:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 20:21:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 20:21:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 20:21:28 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-May-05 20:21:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 20:21:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 20:21:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 20:21:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 20:21:28 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-May-05 20:21:28 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 20:21:28 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 20:21:28 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-May-05 20:21:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 20:21:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 20:21:28 INFO2 take_data: Starting WAPP 1-second scan: 12500116 2010-May-05 20:21:29 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 20:21:29 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2010-May-05 20:21:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 20:21:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 20:21:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1290.00 2010-May-05 20:21:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 20:21:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 20:21:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 20:21:31 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2010-May-05 20:21:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 20:21:31 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-May-05 20:21:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 20:21:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 20:21:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 20:21:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 20:21:31 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-May-05 20:21:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 20:21:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 20:21:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 20:21:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 20:21:31 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-May-05 20:21:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 20:21:31 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 20:21:31 LOG5 finish_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2010-May-05 20:21:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 20:21:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 20:21:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 20:21:31 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2010-May-05 20:21:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2010-May-05 20:21:32 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2010-May-05 20:21:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 20:21:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 20:21:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 20:21:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 20:21:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 20:21:32 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 20:21:32 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 20:21:32 LOG5 begin_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2010-May-05 20:21:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 20:21:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 20:21:32 INFO2 take_data: Starting WAPP 600-second scan: 12500117 2010-May-05 20:21:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 20:21:32 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-May-05 20:21:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 20:21:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 20:21:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 20:21:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1293.00 2010-May-05 20:21:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0017.fits 2010-May-05 20:21:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0017.fits} 2010-May-05 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 20:31:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 20:31:33 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-May-05 20:31:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 20:31:33 LOG5 end_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2010-May-05 20:31:33 LOG1 fixed_driftmap: New position: year = 2010.3445728762645 RA = 10:59:01.5 RA/Dec = 10:59:36.9 +26:46:16.3 2010-May-05 20:31:33 NOTE fixed_driftmap: Correcting ZA to 8:25:02.6 ... 2010-May-05 20:31:33 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4173949782 -CF 2010-May-05 20:31:33 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 20:31:33 START begin_task: Starting task 'WAPP calibration' 2010-May-05 20:31:33 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-May-05 20:31:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 20:31:33 START begin_task: Starting task 'selecting calibration type' 2010-May-05 20:31:33 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-May-05 20:31:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 20:31:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 20:31:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 20:31:33 START begin_task: Starting task 'waiting on setcal' 2010-May-05 20:31:33 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-May-05 20:31:33 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4173949782 -CF 2010-May-05 20:31:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:31:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 20:31:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 20:31:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:31:33 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 20:31:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 20:31:33 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-May-05 20:31:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 20:31:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 20:31:33 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 20:31:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 20:31:33 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-May-05 20:31:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:31:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 20:31:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 20:31:34 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-May-05 20:31:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 20:31:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 20:31:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 20:31:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 20:31:34 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 20:31:34 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2010-May-05 20:31:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 20:31:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 20:31:34 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2010-May-05 20:31:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 20:31:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 20:31:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 20:31:34 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-May-05 20:31:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 20:31:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 20:31:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 20:31:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 20:31:34 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-May-05 20:31:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 20:31:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 20:31:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 20:31:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 20:31:34 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-May-05 20:31:34 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 20:31:34 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 20:31:34 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-May-05 20:31:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 20:31:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 20:31:34 INFO2 take_data: Starting WAPP 1-second scan: 12500118 2010-May-05 20:31:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 20:31:34 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-May-05 20:31:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 20:31:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 20:31:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1895.00 2010-May-05 20:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 20:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 20:31:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 20:31:36 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-May-05 20:31:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 20:31:36 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-May-05 20:31:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 20:31:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 20:31:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 20:31:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 20:31:36 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-May-05 20:31:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 20:31:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 20:31:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 20:31:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 20:31:36 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-May-05 20:31:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 20:31:36 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 20:31:36 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-May-05 20:31:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 20:31:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 20:31:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 20:31:36 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-May-05 20:31:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2010-May-05 20:31:36 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2010-May-05 20:31:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 20:31:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 20:31:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 20:31:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 20:31:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 20:31:37 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 20:31:37 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 20:31:37 LOG5 begin_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2010-May-05 20:31:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 20:31:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 20:31:37 INFO2 take_data: Starting WAPP 600-second scan: 12500119 2010-May-05 20:31:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 20:31:37 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-May-05 20:31:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 20:31:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 20:31:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 20:31:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1898.00 2010-May-05 20:31:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0018.fits 2010-May-05 20:31:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0018.fits} 2010-May-05 20:31:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 20:31:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:31:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:35:51 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:35:51.297 (seconds: 74151.297)!} 2010-May-05 20:35:51 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:35:51.297 (seconds: 74151.297)! 2010-May-05 20:35:52 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 74150.0 to 74151.0! 2010-May-05 20:35:53 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (74150.0 - 74152.0)! 2010-May-05 20:41:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 20:41:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 20:41:38 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-May-05 20:41:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 20:41:38 LOG5 end_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2010-May-05 20:41:38 LOG1 fixed_driftmap: New position: year = 2010.3445920475576 RA = 11:09:08.4 RA/Dec = 11:09:43.5 +26:46:13.8 2010-May-05 20:41:38 NOTE fixed_driftmap: Correcting ZA to 8:25:00.1 ... 2010-May-05 20:41:38 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4166855725 -CF 2010-May-05 20:41:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 20:41:38 START begin_task: Starting task 'WAPP calibration' 2010-May-05 20:41:38 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2010-May-05 20:41:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 20:41:38 START begin_task: Starting task 'selecting calibration type' 2010-May-05 20:41:38 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-May-05 20:41:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 20:41:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 20:41:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 20:41:38 START begin_task: Starting task 'waiting on setcal' 2010-May-05 20:41:38 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-May-05 20:41:38 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4166855725 -CF 2010-May-05 20:41:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:41:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 20:41:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 20:41:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:41:38 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 20:41:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 20:41:38 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-May-05 20:41:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 20:41:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 20:41:38 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 20:41:38 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 20:41:38 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-May-05 20:41:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:41:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 20:41:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 20:41:39 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-May-05 20:41:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 20:41:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 20:41:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 20:41:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 20:41:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 20:41:39 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-May-05 20:41:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 20:41:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 20:41:39 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-May-05 20:41:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 20:41:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 20:41:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 20:41:39 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-May-05 20:41:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 20:41:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 20:41:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 20:41:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 20:41:39 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2010-May-05 20:41:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 20:41:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 20:41:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 20:41:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 20:41:39 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2010-May-05 20:41:39 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 20:41:39 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 20:41:39 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2010-May-05 20:41:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 20:41:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 20:41:39 INFO2 take_data: Starting WAPP 1-second scan: 12500120 2010-May-05 20:41:39 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 20:41:39 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2010-May-05 20:41:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 20:41:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 20:41:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2500.00 2010-May-05 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 20:41:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 20:41:41 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2010-May-05 20:41:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 20:41:41 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2010-May-05 20:41:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 20:41:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 20:41:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 20:41:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 20:41:41 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2010-May-05 20:41:41 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 20:41:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 20:41:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 20:41:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 20:41:41 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2010-May-05 20:41:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 20:41:41 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 20:41:41 LOG5 finish_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2010-May-05 20:41:41 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 20:41:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 20:41:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 20:41:41 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2010-May-05 20:41:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2010-May-05 20:41:41 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2010-May-05 20:41:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 20:41:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 20:41:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 20:41:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 20:41:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 20:41:42 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 20:41:42 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 20:41:42 LOG5 begin_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2010-May-05 20:41:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 20:41:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 20:41:42 INFO2 take_data: Starting WAPP 600-second scan: 12500121 2010-May-05 20:41:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 20:41:42 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2010-May-05 20:41:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 20:41:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 20:41:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 20:41:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2503.00 2010-May-05 20:41:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0019.fits 2010-May-05 20:41:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0019.fits} 2010-May-05 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 20:51:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 20:51:43 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2010-May-05 20:51:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 20:51:43 LOG5 end_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2010-May-05 20:51:43 LOG1 fixed_driftmap: New position: year = 2010.3446112188508 RA = 11:19:15.3 RA/Dec = 11:19:50.2 +26:46:11.6 2010-May-05 20:51:43 NOTE fixed_driftmap: Correcting ZA to 8:24:57.9 ... 2010-May-05 20:51:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4160844301 -CF 2010-May-05 20:51:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 20:51:43 START begin_task: Starting task 'WAPP calibration' 2010-May-05 20:51:43 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2010-May-05 20:51:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 20:51:43 START begin_task: Starting task 'selecting calibration type' 2010-May-05 20:51:43 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-May-05 20:51:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 20:51:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 20:51:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 20:51:43 START begin_task: Starting task 'waiting on setcal' 2010-May-05 20:51:43 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-May-05 20:51:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4160844301 -CF 2010-May-05 20:51:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:51:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 20:51:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 20:51:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:51:43 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 20:51:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 20:51:43 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-May-05 20:51:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 20:51:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 20:51:43 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 20:51:43 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 20:51:43 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-May-05 20:51:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 20:51:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 20:51:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 20:51:44 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-May-05 20:51:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 20:51:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 20:51:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 20:51:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 20:51:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 20:51:44 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-May-05 20:51:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 20:51:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 20:51:44 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-May-05 20:51:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 20:51:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 20:51:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 20:51:44 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-May-05 20:51:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 20:51:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 20:51:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 20:51:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 20:51:44 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-May-05 20:51:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 20:51:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 20:51:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 20:51:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 20:51:44 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-May-05 20:51:44 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 20:51:44 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 20:51:44 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-May-05 20:51:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 20:51:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 20:51:44 INFO2 take_data: Starting WAPP 1-second scan: 12500122 2010-May-05 20:51:44 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 20:51:44 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2010-May-05 20:51:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 20:51:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 20:51:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3105.00 2010-May-05 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:46 LOG3 WAPP=3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:46 LOG3 WAPP=1+2-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 20:51:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 20:51:46 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2010-May-05 20:51:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 20:51:46 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-May-05 20:51:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 20:51:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 20:51:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 20:51:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 20:51:46 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-May-05 20:51:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 20:51:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 20:51:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 20:51:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 20:51:47 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-May-05 20:51:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 20:51:47 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 20:51:47 LOG5 finish_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2010-May-05 20:51:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 20:51:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 20:51:47 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 20:51:47 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2010-May-05 20:51:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2010-May-05 20:51:47 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2010-May-05 20:51:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 20:51:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 20:51:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 20:51:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 20:51:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 20:51:47 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 20:51:47 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 20:51:47 LOG5 begin_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2010-May-05 20:51:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 20:51:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 20:51:47 INFO2 take_data: Starting WAPP 600-second scan: 12500123 2010-May-05 20:51:47 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 20:51:47 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-May-05 20:51:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 20:51:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 20:51:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 20:51:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3108.00 2010-May-05 20:51:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0020.fits 2010-May-05 20:51:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0020.fits} 2010-May-05 20:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 20:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 20:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 21:01:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 21:01:48 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-May-05 21:01:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 21:01:48 LOG5 end_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2010-May-05 21:01:48 LOG1 fixed_driftmap: New position: year = 2010.3446303901437 RA = 11:29:22.2 RA/Dec = 11:29:56.8 +26:46:09.8 2010-May-05 21:01:48 NOTE fixed_driftmap: Correcting ZA to 8:24:56.1 ... 2010-May-05 21:01:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4155927189 -CF 2010-May-05 21:01:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 21:01:48 START begin_task: Starting task 'WAPP calibration' 2010-May-05 21:01:48 LOG5 begin_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2010-May-05 21:01:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 21:01:48 START begin_task: Starting task 'selecting calibration type' 2010-May-05 21:01:48 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-May-05 21:01:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 21:01:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 21:01:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 21:01:48 START begin_task: Starting task 'waiting on setcal' 2010-May-05 21:01:48 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-May-05 21:01:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4155927189 -CF 2010-May-05 21:01:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:01:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 21:01:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 21:01:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:01:49 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 21:01:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 21:01:49 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-May-05 21:01:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 21:01:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 21:01:49 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 21:01:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 21:01:49 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2010-May-05 21:01:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:01:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 21:01:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 21:01:49 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2010-May-05 21:01:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 21:01:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 21:01:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 21:01:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 21:01:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 21:01:49 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-May-05 21:01:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 21:01:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 21:01:49 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-May-05 21:01:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 21:01:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 21:01:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 21:01:49 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-May-05 21:01:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 21:01:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 21:01:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 21:01:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 21:01:49 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-May-05 21:01:49 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 21:01:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 21:01:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 21:01:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 21:01:49 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-May-05 21:01:49 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 21:01:49 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 21:01:49 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2010-May-05 21:01:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 21:01:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 21:01:49 INFO2 take_data: Starting WAPP 1-second scan: 12500124 2010-May-05 21:01:50 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 21:01:50 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2010-May-05 21:01:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 21:01:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 21:01:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3711.00 2010-May-05 21:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 21:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 21:01:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 21:01:52 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2010-May-05 21:01:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 21:01:52 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2010-May-05 21:01:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 21:01:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 21:01:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 21:01:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 21:01:52 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2010-May-05 21:01:52 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 21:01:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 21:01:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 21:01:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 21:01:52 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2010-May-05 21:01:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 21:01:52 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 21:01:52 LOG5 finish_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2010-May-05 21:01:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 21:01:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 21:01:52 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 21:01:52 LOG5 end_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2010-May-05 21:01:52 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2010-May-05 21:01:53 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2010-May-05 21:01:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 21:01:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 21:01:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 21:01:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 21:01:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 21:01:53 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 21:01:53 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 21:01:53 LOG5 begin_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2010-May-05 21:01:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 21:01:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 21:01:53 INFO2 take_data: Starting WAPP 600-second scan: 12500125 2010-May-05 21:01:53 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 21:01:53 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2010-May-05 21:01:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 21:01:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 21:01:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 21:01:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3714.00 2010-May-05 21:01:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0021.fits 2010-May-05 21:01:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0021.fits} 2010-May-05 21:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 21:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:05:49 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 21:05:49.298 (seconds: 75949.298)!} 2010-May-05 21:05:49 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 21:05:49.298 (seconds: 75949.298)! 2010-May-05 21:05:50 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 75948.0 to 75949.0! 2010-May-05 21:05:51 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (75948.0 - 75950.0)! 2010-May-05 21:11:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 21:11:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 21:11:54 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2010-May-05 21:11:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 21:11:54 LOG5 end_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2010-May-05 21:11:54 LOG1 fixed_driftmap: New position: year = 2010.344649593125 RA = 11:39:30.1 RA/Dec = 11:40:04.5 +26:46:08.5 2010-May-05 21:11:54 NOTE fixed_driftmap: Correcting ZA to 8:24:54.8 ... 2010-May-05 21:11:54 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4152108632 -CF 2010-May-05 21:11:54 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 21:11:54 START begin_task: Starting task 'WAPP calibration' 2010-May-05 21:11:54 LOG5 begin_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2010-May-05 21:11:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 21:11:54 START begin_task: Starting task 'selecting calibration type' 2010-May-05 21:11:54 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-May-05 21:11:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 21:11:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 21:11:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 21:11:54 START begin_task: Starting task 'waiting on setcal' 2010-May-05 21:11:54 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-May-05 21:11:54 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4152108632 -CF 2010-May-05 21:11:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:11:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 21:11:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 21:11:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:11:54 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 21:11:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 21:11:54 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-May-05 21:11:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 21:11:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 21:11:54 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 21:11:54 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 21:11:54 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-May-05 21:11:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:11:55 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 21:11:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 21:11:55 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-May-05 21:11:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 21:11:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 21:11:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 21:11:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 21:11:55 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 21:11:55 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2010-May-05 21:11:55 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 21:11:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 21:11:55 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2010-May-05 21:11:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 21:11:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 21:11:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 21:11:55 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-May-05 21:11:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 21:11:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 21:11:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 21:11:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 21:11:55 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-May-05 21:11:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 21:11:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 21:11:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 21:11:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 21:11:55 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-May-05 21:11:55 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 21:11:55 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 21:11:55 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2010-May-05 21:11:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 21:11:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 21:11:55 INFO2 take_data: Starting WAPP 1-second scan: 12500126 2010-May-05 21:11:55 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 21:11:55 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2010-May-05 21:11:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 21:11:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 21:11:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4316.00 2010-May-05 21:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 21:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:11:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 21:11:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 21:11:57 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2010-May-05 21:11:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 21:11:57 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2010-May-05 21:11:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 21:11:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 21:11:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 21:11:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 21:11:57 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2010-May-05 21:11:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 21:11:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 21:11:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 21:11:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 21:11:57 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2010-May-05 21:11:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 21:11:57 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 21:11:57 LOG5 finish_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2010-May-05 21:11:57 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 21:11:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 21:11:57 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 21:11:57 LOG5 end_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2010-May-05 21:11:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2010-May-05 21:11:57 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2010-May-05 21:11:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 21:11:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 21:11:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 21:11:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 21:11:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 21:11:58 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 21:11:58 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 21:11:58 LOG5 begin_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2010-May-05 21:11:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 21:11:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 21:11:58 INFO2 take_data: Starting WAPP 600-second scan: 12500127 2010-May-05 21:11:58 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 21:11:58 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2010-May-05 21:11:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 21:11:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 21:11:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 21:11:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4319.00 2010-May-05 21:11:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0022.fits 2010-May-05 21:11:58 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0022.fits} 2010-May-05 21:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 21:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:12:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:21:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 21:21:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 21:21:59 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2010-May-05 21:21:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 21:21:59 LOG5 end_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2010-May-05 21:21:59 LOG1 fixed_driftmap: New position: year = 2010.3446687644182 RA = 11:49:37.1 RA/Dec = 11:50:11.2 +26:46:07.5 2010-May-05 21:21:59 NOTE fixed_driftmap: Correcting ZA to 8:24:53.8 ... 2010-May-05 21:21:59 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4149408653 -CF 2010-May-05 21:21:59 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 21:21:59 START begin_task: Starting task 'WAPP calibration' 2010-May-05 21:21:59 LOG5 begin_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2010-May-05 21:21:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 21:21:59 START begin_task: Starting task 'selecting calibration type' 2010-May-05 21:21:59 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-May-05 21:21:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 21:21:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 21:21:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 21:21:59 START begin_task: Starting task 'waiting on setcal' 2010-May-05 21:21:59 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-May-05 21:21:59 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4149408653 -CF 2010-May-05 21:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:21:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 21:21:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 21:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:21:59 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 21:21:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 21:21:59 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-May-05 21:21:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 21:21:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 21:21:59 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 21:21:59 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 21:21:59 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-May-05 21:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:22:00 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 21:22:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 21:22:00 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-May-05 21:22:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 21:22:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 21:22:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 21:22:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 21:22:00 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 21:22:00 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2010-May-05 21:22:00 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 21:22:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 21:22:00 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2010-May-05 21:22:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 21:22:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 21:22:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 21:22:00 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-May-05 21:22:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 21:22:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 21:22:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 21:22:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 21:22:00 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-May-05 21:22:00 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 21:22:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 21:22:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 21:22:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 21:22:00 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-May-05 21:22:00 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 21:22:00 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 21:22:00 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2010-May-05 21:22:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 21:22:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 21:22:00 INFO2 take_data: Starting WAPP 1-second scan: 12500128 2010-May-05 21:22:00 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 21:22:00 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2010-May-05 21:22:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 21:22:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 21:22:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4921.00 2010-May-05 21:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 21:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 21:22:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 21:22:02 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2010-May-05 21:22:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 21:22:02 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2010-May-05 21:22:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 21:22:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 21:22:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 21:22:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 21:22:02 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2010-May-05 21:22:02 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 21:22:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 21:22:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 21:22:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 21:22:02 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2010-May-05 21:22:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 21:22:02 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 21:22:02 LOG5 finish_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2010-May-05 21:22:02 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 21:22:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 21:22:02 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 21:22:02 LOG5 end_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2010-May-05 21:22:02 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2010-May-05 21:22:02 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2010-May-05 21:22:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 21:22:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 21:22:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 21:22:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 21:22:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 21:22:03 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 21:22:03 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 21:22:03 LOG5 begin_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2010-May-05 21:22:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 21:22:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 21:22:03 INFO2 take_data: Starting WAPP 600-second scan: 12500129 2010-May-05 21:22:03 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 21:22:03 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-May-05 21:22:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 21:22:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 21:22:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 21:22:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4924.00 2010-May-05 21:22:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0023.fits 2010-May-05 21:22:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0023.fits} 2010-May-05 21:22:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 21:22:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:22:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 21:32:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 21:32:04 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-May-05 21:32:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 21:32:04 LOG5 end_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2010-May-05 21:32:04 LOG1 fixed_driftmap: New position: year = 2010.3446879357114 RA = 11:59:44.0 RA/Dec = 12:00:17.8 +26:46:06.9 2010-May-05 21:32:04 NOTE fixed_driftmap: Correcting ZA to 8:24:53.2 ... 2010-May-05 21:32:04 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4147825282 -CF 2010-May-05 21:32:04 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 21:32:04 START begin_task: Starting task 'WAPP calibration' 2010-May-05 21:32:04 LOG5 begin_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2010-May-05 21:32:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 21:32:04 START begin_task: Starting task 'selecting calibration type' 2010-May-05 21:32:04 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-May-05 21:32:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 21:32:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 21:32:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 21:32:04 START begin_task: Starting task 'waiting on setcal' 2010-May-05 21:32:04 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-May-05 21:32:04 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4147825282 -CF 2010-May-05 21:32:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:32:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 21:32:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 21:32:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:32:04 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 21:32:04 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 21:32:04 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-May-05 21:32:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 21:32:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 21:32:04 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 21:32:04 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 21:32:04 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-May-05 21:32:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:32:05 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 21:32:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 21:32:05 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-May-05 21:32:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 21:32:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 21:32:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 21:32:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 21:32:05 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 21:32:05 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-May-05 21:32:05 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 21:32:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 21:32:05 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-May-05 21:32:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 21:32:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 21:32:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 21:32:05 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-May-05 21:32:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 21:32:05 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 21:32:05 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 21:32:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 21:32:05 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-May-05 21:32:05 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 21:32:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 21:32:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 21:32:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 21:32:05 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-May-05 21:32:05 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 21:32:05 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 21:32:05 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2010-May-05 21:32:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 21:32:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 21:32:05 INFO2 take_data: Starting WAPP 1-second scan: 12500130 2010-May-05 21:32:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 21:32:06 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2010-May-05 21:32:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 21:32:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 21:32:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5527.00 2010-May-05 21:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 21:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 21:32:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 21:32:08 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2010-May-05 21:32:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 21:32:08 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2010-May-05 21:32:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 21:32:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 21:32:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 21:32:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 21:32:08 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2010-May-05 21:32:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 21:32:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 21:32:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 21:32:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 21:32:08 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2010-May-05 21:32:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 21:32:08 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 21:32:08 LOG5 finish_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2010-May-05 21:32:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 21:32:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 21:32:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 21:32:08 LOG5 end_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2010-May-05 21:32:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2010-May-05 21:32:09 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2010-May-05 21:32:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 21:32:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 21:32:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 21:32:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 21:32:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 21:32:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 21:32:09 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 21:32:09 LOG5 begin_task: Level: (2) ID = <10208> Status = 0 0 0 0 ok 2010-May-05 21:32:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 21:32:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 21:32:09 INFO2 take_data: Starting WAPP 600-second scan: 12500131 2010-May-05 21:32:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 21:32:09 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2010-May-05 21:32:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 21:32:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 21:32:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 21:32:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5530.00 2010-May-05 21:32:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0024.fits 2010-May-05 21:32:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0024.fits} 2010-May-05 21:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 21:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 21:42:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 21:42:10 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2010-May-05 21:42:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 21:42:10 LOG5 end_task: Level: (2) ID = <10208> Status = 0 0 0 0 ok 2010-May-05 21:42:10 LOG1 fixed_driftmap: New position: year = 2010.3447071386925 RA = 12:09:51.9 RA/Dec = 12:10:25.5 +26:46:06.8 2010-May-05 21:42:10 NOTE fixed_driftmap: Correcting ZA to 8:24:53.1 ... 2010-May-05 21:42:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4147361790 -CF 2010-May-05 21:42:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 21:42:10 START begin_task: Starting task 'WAPP calibration' 2010-May-05 21:42:10 LOG5 begin_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2010-May-05 21:42:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 21:42:10 START begin_task: Starting task 'selecting calibration type' 2010-May-05 21:42:10 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-May-05 21:42:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 21:42:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 21:42:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 21:42:10 START begin_task: Starting task 'waiting on setcal' 2010-May-05 21:42:10 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2010-May-05 21:42:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4147361790 -CF 2010-May-05 21:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:42:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 21:42:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 21:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:42:10 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 21:42:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 21:42:10 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2010-May-05 21:42:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 21:42:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 21:42:10 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 21:42:10 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 21:42:10 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-May-05 21:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:42:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 21:42:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 21:42:11 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-May-05 21:42:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 21:42:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 21:42:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 21:42:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 21:42:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 21:42:12 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-May-05 21:42:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 21:42:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 21:42:12 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-May-05 21:42:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 21:42:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 21:42:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 21:42:12 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-May-05 21:42:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 21:42:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 21:42:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 21:42:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 21:42:12 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2010-May-05 21:42:12 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 21:42:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 21:42:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 21:42:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 21:42:12 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2010-May-05 21:42:12 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 21:42:12 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 21:42:12 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2010-May-05 21:42:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 21:42:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 21:42:12 INFO2 take_data: Starting WAPP 1-second scan: 12500132 2010-May-05 21:42:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 21:42:12 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2010-May-05 21:42:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 21:42:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 21:42:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6133.00 2010-May-05 21:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 21:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 21:42:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 21:42:14 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2010-May-05 21:42:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 21:42:14 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2010-May-05 21:42:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 21:42:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 21:42:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 21:42:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 21:42:14 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2010-May-05 21:42:15 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 21:42:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 21:42:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 21:42:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 21:42:15 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2010-May-05 21:42:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 21:42:15 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 21:42:15 LOG5 finish_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2010-May-05 21:42:15 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 21:42:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 21:42:15 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 21:42:15 LOG5 end_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2010-May-05 21:42:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2010-May-05 21:42:15 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2010-May-05 21:42:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 21:42:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 21:42:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 21:42:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 21:42:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 21:42:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 21:42:15 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 21:42:15 LOG5 begin_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2010-May-05 21:42:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 21:42:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 21:42:15 INFO2 take_data: Starting WAPP 600-second scan: 12500133 2010-May-05 21:42:15 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 21:42:15 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2010-May-05 21:42:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 21:42:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 21:42:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 21:42:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6136.00 2010-May-05 21:42:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0025.fits 2010-May-05 21:42:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0025.fits} 2010-May-05 21:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 21:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 21:52:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 21:52:16 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2010-May-05 21:52:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 21:52:16 LOG5 end_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2010-May-05 21:52:16 LOG1 fixed_driftmap: New position: year = 2010.3447263416738 RA = 12:19:59.8 RA/Dec = 12:20:33.1 +26:46:07.0 2010-May-05 21:52:16 NOTE fixed_driftmap: Correcting ZA to 8:24:53.3 ... 2010-May-05 21:52:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4148022610 -CF 2010-May-05 21:52:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 21:52:16 START begin_task: Starting task 'WAPP calibration' 2010-May-05 21:52:16 LOG5 begin_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2010-May-05 21:52:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 21:52:16 START begin_task: Starting task 'selecting calibration type' 2010-May-05 21:52:16 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-May-05 21:52:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 21:52:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 21:52:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 21:52:16 START begin_task: Starting task 'waiting on setcal' 2010-May-05 21:52:16 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2010-May-05 21:52:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4148022610 -CF 2010-May-05 21:52:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:52:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 21:52:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 21:52:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:52:17 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 21:52:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 21:52:17 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2010-May-05 21:52:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 21:52:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 21:52:17 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 21:52:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 21:52:17 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2010-May-05 21:52:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 21:52:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 21:52:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 21:52:17 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2010-May-05 21:52:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 21:52:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 21:52:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 21:52:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 21:52:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 21:52:17 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2010-May-05 21:52:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 21:52:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 21:52:17 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2010-May-05 21:52:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 21:52:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 21:52:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 21:52:17 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-May-05 21:52:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 21:52:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 21:52:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 21:52:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 21:52:17 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-May-05 21:52:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 21:52:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 21:52:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 21:52:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 21:52:17 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-May-05 21:52:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 21:52:17 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 21:52:17 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-May-05 21:52:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 21:52:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 21:52:17 INFO2 take_data: Starting WAPP 1-second scan: 12500134 2010-May-05 21:52:18 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 21:52:18 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2010-May-05 21:52:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 21:52:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 21:52:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6739.00 2010-May-05 21:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 21:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 21:52:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 21:52:20 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2010-May-05 21:52:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 21:52:20 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-May-05 21:52:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 21:52:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 21:52:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 21:52:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 21:52:20 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2010-May-05 21:52:20 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 21:52:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 21:52:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 21:52:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 21:52:20 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2010-May-05 21:52:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 21:52:20 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 21:52:20 LOG5 finish_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2010-May-05 21:52:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 21:52:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 21:52:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 21:52:20 LOG5 end_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2010-May-05 21:52:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2010-May-05 21:52:20 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2010-May-05 21:52:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 21:52:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 21:52:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 21:52:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 21:52:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 21:52:21 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 21:52:21 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 21:52:21 LOG5 begin_task: Level: (2) ID = <10230> Status = 0 0 0 0 ok 2010-May-05 21:52:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 21:52:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 21:52:21 INFO2 take_data: Starting WAPP 600-second scan: 12500135 2010-May-05 21:52:21 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 21:52:21 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2010-May-05 21:52:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 21:52:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 21:52:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 21:52:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6742.00 2010-May-05 21:52:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0026.fits 2010-May-05 21:52:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0026.fits} 2010-May-05 21:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 21:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 21:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 22:02:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 22:02:22 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2010-May-05 22:02:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 22:02:22 LOG5 end_task: Level: (2) ID = <10230> Status = 0 0 0 0 ok 2010-May-05 22:02:22 LOG1 fixed_driftmap: New position: year = 2010.3447455446549 RA = 12:30:07.8 RA/Dec = 12:30:40.8 +26:46:07.6 2010-May-05 22:02:22 NOTE fixed_driftmap: Correcting ZA to 8:24:53.9 ... 2010-May-05 22:02:22 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4149806448 -CF 2010-May-05 22:02:22 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 22:02:22 START begin_task: Starting task 'WAPP calibration' 2010-May-05 22:02:22 LOG5 begin_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2010-May-05 22:02:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 22:02:22 START begin_task: Starting task 'selecting calibration type' 2010-May-05 22:02:22 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2010-May-05 22:02:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 22:02:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 22:02:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 22:02:22 START begin_task: Starting task 'waiting on setcal' 2010-May-05 22:02:22 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-May-05 22:02:22 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4149806448 -CF 2010-May-05 22:02:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:02:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 22:02:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 22:02:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:02:22 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 22:02:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 22:02:22 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-May-05 22:02:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 22:02:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 22:02:22 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 22:02:22 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 22:02:22 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2010-May-05 22:02:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:02:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 22:02:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 22:02:23 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2010-May-05 22:02:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 22:02:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 22:02:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 22:02:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 22:02:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 22:02:23 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-May-05 22:02:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 22:02:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 22:02:23 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-May-05 22:02:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 22:02:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 22:02:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 22:02:23 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2010-May-05 22:02:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 22:02:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 22:02:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 22:02:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 22:02:23 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2010-May-05 22:02:23 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 22:02:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 22:02:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 22:02:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 22:02:23 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2010-May-05 22:02:23 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 22:02:23 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 22:02:23 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2010-May-05 22:02:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 22:02:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 22:02:23 INFO2 take_data: Starting WAPP 1-second scan: 12500136 2010-May-05 22:02:23 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 22:02:23 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2010-May-05 22:02:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 22:02:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 22:02:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7344.00 2010-May-05 22:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 22:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 22:02:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 22:02:25 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2010-May-05 22:02:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 22:02:25 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2010-May-05 22:02:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 22:02:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 22:02:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 22:02:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 22:02:25 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2010-May-05 22:02:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 22:02:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 22:02:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 22:02:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 22:02:25 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2010-May-05 22:02:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 22:02:25 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 22:02:25 LOG5 finish_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2010-May-05 22:02:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 22:02:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 22:02:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 22:02:25 LOG5 end_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2010-May-05 22:02:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2010-May-05 22:02:25 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2010-May-05 22:02:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 22:02:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 22:02:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 22:02:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 22:02:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 22:02:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 22:02:26 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 22:02:26 LOG5 begin_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2010-May-05 22:02:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 22:02:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 22:02:26 INFO2 take_data: Starting WAPP 600-second scan: 12500137 2010-May-05 22:02:26 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 22:02:26 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2010-May-05 22:02:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 22:02:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 22:02:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 22:02:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7347.00 2010-May-05 22:02:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0027.fits 2010-May-05 22:02:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0027.fits} 2010-May-05 22:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 22:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 22:12:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 22:12:27 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2010-May-05 22:12:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 22:12:27 LOG5 end_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2010-May-05 22:12:27 LOG1 fixed_driftmap: New position: year = 2010.344764715948 RA = 12:40:14.7 RA/Dec = 12:40:47.4 +26:46:08.7 2010-May-05 22:12:27 NOTE fixed_driftmap: Correcting ZA to 8:24:55.0 ... 2010-May-05 22:12:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4152704092 -CF 2010-May-05 22:12:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 22:12:27 START begin_task: Starting task 'WAPP calibration' 2010-May-05 22:12:27 LOG5 begin_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2010-May-05 22:12:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 22:12:27 START begin_task: Starting task 'selecting calibration type' 2010-May-05 22:12:27 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-May-05 22:12:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 22:12:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 22:12:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 22:12:27 START begin_task: Starting task 'waiting on setcal' 2010-May-05 22:12:27 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-May-05 22:12:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4152704092 -CF 2010-May-05 22:12:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:12:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 22:12:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 22:12:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:12:27 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 22:12:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 22:12:27 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-May-05 22:12:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 22:12:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 22:12:27 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 22:12:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 22:12:27 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2010-May-05 22:12:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:12:28 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 22:12:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 22:12:28 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2010-May-05 22:12:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 22:12:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 22:12:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 22:12:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 22:12:28 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 22:12:28 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2010-May-05 22:12:28 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 22:12:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 22:12:28 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2010-May-05 22:12:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 22:12:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 22:12:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 22:12:28 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-May-05 22:12:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 22:12:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 22:12:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 22:12:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 22:12:28 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2010-May-05 22:12:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 22:12:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 22:12:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 22:12:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 22:12:28 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2010-May-05 22:12:28 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 22:12:28 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 22:12:28 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2010-May-05 22:12:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 22:12:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 22:12:28 INFO2 take_data: Starting WAPP 1-second scan: 12500138 2010-May-05 22:12:28 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 22:12:28 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2010-May-05 22:12:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 22:12:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 22:12:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7949.00 2010-May-05 22:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 22:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 22:12:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 22:12:30 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2010-May-05 22:12:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 22:12:30 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2010-May-05 22:12:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 22:12:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 22:12:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 22:12:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 22:12:30 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2010-May-05 22:12:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 22:12:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 22:12:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 22:12:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 22:12:31 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2010-May-05 22:12:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 22:12:31 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 22:12:31 LOG5 finish_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2010-May-05 22:12:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 22:12:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 22:12:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 22:12:31 LOG5 end_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2010-May-05 22:12:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2010-May-05 22:12:31 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2010-May-05 22:12:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 22:12:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 22:12:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 22:12:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 22:12:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 22:12:31 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 22:12:31 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 22:12:31 LOG5 begin_task: Level: (2) ID = <10252> Status = 0 0 0 0 ok 2010-May-05 22:12:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 22:12:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 22:12:31 INFO2 take_data: Starting WAPP 600-second scan: 12500139 2010-May-05 22:12:31 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 22:12:31 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2010-May-05 22:12:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 22:12:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 22:12:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 22:12:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7952.00 2010-May-05 22:12:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0028.fits 2010-May-05 22:12:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0028.fits} 2010-May-05 22:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 22:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 22:22:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 22:22:32 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2010-May-05 22:22:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 22:22:32 LOG5 end_task: Level: (2) ID = <10252> Status = 0 0 0 0 ok 2010-May-05 22:22:32 LOG1 fixed_driftmap: New position: year = 2010.3447838872412 RA = 12:50:21.6 RA/Dec = 12:50:54.1 +26:46:10.1 2010-May-05 22:22:32 NOTE fixed_driftmap: Correcting ZA to 8:24:56.4 ... 2010-May-05 22:22:32 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4156711942 -CF 2010-May-05 22:22:32 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 22:22:32 START begin_task: Starting task 'WAPP calibration' 2010-May-05 22:22:32 LOG5 begin_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2010-May-05 22:22:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 22:22:32 START begin_task: Starting task 'selecting calibration type' 2010-May-05 22:22:32 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-May-05 22:22:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 22:22:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 22:22:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 22:22:32 START begin_task: Starting task 'waiting on setcal' 2010-May-05 22:22:32 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2010-May-05 22:22:32 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4156711942 -CF 2010-May-05 22:22:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:22:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 22:22:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 22:22:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:22:33 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 22:22:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 22:22:33 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2010-May-05 22:22:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 22:22:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 22:22:33 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 22:22:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 22:22:33 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2010-May-05 22:22:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:22:33 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 22:22:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 22:22:33 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2010-May-05 22:22:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 22:22:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 22:22:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 22:22:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 22:22:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 22:22:33 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-May-05 22:22:33 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 22:22:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 22:22:33 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-May-05 22:22:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 22:22:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 22:22:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 22:22:33 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-May-05 22:22:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 22:22:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 22:22:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 22:22:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 22:22:33 LOG5 begin_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-May-05 22:22:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 22:22:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 22:22:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 22:22:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 22:22:33 LOG5 end_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-May-05 22:22:33 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 22:22:33 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 22:22:33 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2010-May-05 22:22:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 22:22:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 22:22:33 INFO2 take_data: Starting WAPP 1-second scan: 12500140 2010-May-05 22:22:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 22:22:34 LOG5 begin_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2010-May-05 22:22:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 22:22:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 22:22:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8555.00 2010-May-05 22:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 22:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 22:22:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 22:22:36 LOG5 end_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2010-May-05 22:22:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 22:22:36 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2010-May-05 22:22:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 22:22:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 22:22:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 22:22:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 22:22:36 LOG5 begin_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2010-May-05 22:22:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 22:22:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 22:22:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 22:22:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 22:22:36 LOG5 end_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2010-May-05 22:22:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 22:22:36 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 22:22:36 LOG5 finish_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2010-May-05 22:22:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 22:22:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 22:22:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 22:22:36 LOG5 end_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2010-May-05 22:22:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 21 of 99 2010-May-05 22:22:36 LOG4 send_obs_status: To obs_status: <1> LOOP 21 2010-May-05 22:22:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 22:22:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 22:22:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 22:22:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 22:22:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 22:22:37 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 22:22:37 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 22:22:37 LOG5 begin_task: Level: (2) ID = <10263> Status = 0 0 0 0 ok 2010-May-05 22:22:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 22:22:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 22:22:37 INFO2 take_data: Starting WAPP 600-second scan: 12500141 2010-May-05 22:22:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 22:22:37 LOG5 begin_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2010-May-05 22:22:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 22:22:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 22:22:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 22:22:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8558.00 2010-May-05 22:22:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0029.fits 2010-May-05 22:22:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0029.fits} 2010-May-05 22:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 22:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 22:32:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 22:32:38 LOG5 end_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2010-May-05 22:32:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 22:32:38 LOG5 end_task: Level: (2) ID = <10263> Status = 0 0 0 0 ok 2010-May-05 22:32:38 LOG1 fixed_driftmap: New position: year = 2010.3448030902223 RA = 13:00:29.6 RA/Dec = 13:01:01.8 +26:46:12.0 2010-May-05 22:32:38 NOTE fixed_driftmap: Correcting ZA to 8:24:58.3 ... 2010-May-05 22:32:38 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4161831507 -CF 2010-May-05 22:32:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 22:32:38 START begin_task: Starting task 'WAPP calibration' 2010-May-05 22:32:38 LOG5 begin_task: Level: (2) ID = <10265> Status = 0 0 0 0 ok 2010-May-05 22:32:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 22:32:38 START begin_task: Starting task 'selecting calibration type' 2010-May-05 22:32:38 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-May-05 22:32:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 22:32:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 22:32:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 22:32:38 START begin_task: Starting task 'waiting on setcal' 2010-May-05 22:32:38 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2010-May-05 22:32:38 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4161831507 -CF 2010-May-05 22:32:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:32:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 22:32:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 22:32:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:32:38 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 22:32:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 22:32:38 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2010-May-05 22:32:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 22:32:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 22:32:38 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 22:32:38 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 22:32:38 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2010-May-05 22:32:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:32:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 22:32:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 22:32:39 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2010-May-05 22:32:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 22:32:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 22:32:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 22:32:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 22:32:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 22:32:39 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2010-May-05 22:32:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 22:32:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 22:32:39 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2010-May-05 22:32:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 22:32:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 22:32:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 22:32:39 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-May-05 22:32:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 22:32:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 22:32:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 22:32:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 22:32:39 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2010-May-05 22:32:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 22:32:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 22:32:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 22:32:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 22:32:39 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2010-May-05 22:32:39 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 22:32:39 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 22:32:39 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2010-May-05 22:32:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 22:32:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 22:32:39 INFO2 take_data: Starting WAPP 1-second scan: 12500142 2010-May-05 22:32:39 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 22:32:39 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2010-May-05 22:32:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 22:32:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 22:32:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9160.00 2010-May-05 22:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 22:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 22:32:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 22:32:41 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2010-May-05 22:32:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 22:32:41 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2010-May-05 22:32:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 22:32:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 22:32:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 22:32:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 22:32:41 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2010-May-05 22:32:41 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 22:32:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 22:32:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 22:32:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 22:32:41 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2010-May-05 22:32:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 22:32:41 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 22:32:41 LOG5 finish_task: Level: (2) ID = <10265> Status = 0 0 0 0 ok 2010-May-05 22:32:41 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 22:32:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 22:32:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 22:32:41 LOG5 end_task: Level: (2) ID = <10265> Status = 0 0 0 0 ok 2010-May-05 22:32:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 22 of 99 2010-May-05 22:32:41 LOG4 send_obs_status: To obs_status: <1> LOOP 22 2010-May-05 22:32:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 22:32:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 22:32:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 22:32:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 22:32:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 22:32:42 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 22:32:42 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 22:32:42 LOG5 begin_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2010-May-05 22:32:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 22:32:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 22:32:42 INFO2 take_data: Starting WAPP 600-second scan: 12500143 2010-May-05 22:32:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 22:32:42 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2010-May-05 22:32:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 22:32:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 22:32:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 22:32:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9163.00 2010-May-05 22:32:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0030.fits 2010-May-05 22:32:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0030.fits} 2010-May-05 22:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 22:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 22:42:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 22:42:43 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2010-May-05 22:42:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 22:42:43 LOG5 end_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2010-May-05 22:42:43 LOG1 fixed_driftmap: New position: year = 2010.3448222615154 RA = 13:10:36.5 RA/Dec = 13:11:08.4 +26:46:14.2 2010-May-05 22:42:43 NOTE fixed_driftmap: Correcting ZA to 8:25:00.5 ... 2010-May-05 22:42:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4168035920 -CF 2010-May-05 22:42:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 22:42:43 START begin_task: Starting task 'WAPP calibration' 2010-May-05 22:42:43 LOG5 begin_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2010-May-05 22:42:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 22:42:43 START begin_task: Starting task 'selecting calibration type' 2010-May-05 22:42:43 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2010-May-05 22:42:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 22:42:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 22:42:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 22:42:43 START begin_task: Starting task 'waiting on setcal' 2010-May-05 22:42:43 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2010-May-05 22:42:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4168035920 -CF 2010-May-05 22:42:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:42:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 22:42:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 22:42:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:42:43 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 22:42:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 22:42:43 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2010-May-05 22:42:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 22:42:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 22:42:43 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 22:42:43 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 22:42:43 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2010-May-05 22:42:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:42:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 22:42:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 22:42:44 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2010-May-05 22:42:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 22:42:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 22:42:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 22:42:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 22:42:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 22:42:44 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2010-May-05 22:42:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 22:42:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 22:42:44 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2010-May-05 22:42:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 22:42:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 22:42:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 22:42:44 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2010-May-05 22:42:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 22:42:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 22:42:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 22:42:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 22:42:44 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2010-May-05 22:42:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 22:42:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 22:42:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 22:42:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 22:42:44 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2010-May-05 22:42:44 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 22:42:44 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 22:42:44 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2010-May-05 22:42:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 22:42:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 22:42:44 INFO2 take_data: Starting WAPP 1-second scan: 12500144 2010-May-05 22:42:44 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 22:42:44 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2010-May-05 22:42:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 22:42:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 22:42:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9765.00 2010-May-05 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 22:42:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 22:42:46 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2010-May-05 22:42:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 22:42:46 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2010-May-05 22:42:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 22:42:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 22:42:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 22:42:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 22:42:46 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2010-May-05 22:42:46 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 22:42:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 22:42:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 22:42:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 22:42:46 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2010-May-05 22:42:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 22:42:46 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 22:42:46 LOG5 finish_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2010-May-05 22:42:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 22:42:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 22:42:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 22:42:46 LOG5 end_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2010-May-05 22:42:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 23 of 99 2010-May-05 22:42:46 LOG4 send_obs_status: To obs_status: <1> LOOP 23 2010-May-05 22:42:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 22:42:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 22:42:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 22:42:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 22:42:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 22:42:47 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 22:42:47 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 22:42:47 LOG5 begin_task: Level: (2) ID = <10285> Status = 0 0 0 0 ok 2010-May-05 22:42:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 22:42:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 22:42:47 INFO2 take_data: Starting WAPP 600-second scan: 12500145 2010-May-05 22:42:47 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 22:42:47 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2010-May-05 22:42:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 22:42:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 22:42:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 22:42:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9768.00 2010-May-05 22:42:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0031.fits 2010-May-05 22:42:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0031.fits} 2010-May-05 22:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 22:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 22:52:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 22:52:48 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2010-May-05 22:52:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 22:52:48 LOG5 end_task: Level: (2) ID = <10285> Status = 0 0 0 0 ok 2010-May-05 22:52:48 LOG1 fixed_driftmap: New position: year = 2010.3448414328086 RA = 13:20:43.4 RA/Dec = 13:21:15.1 +26:46:16.8 2010-May-05 22:52:48 NOTE fixed_driftmap: Correcting ZA to 8:25:03.1 ... 2010-May-05 22:52:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4175320648 -CF 2010-May-05 22:52:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 22:52:48 START begin_task: Starting task 'WAPP calibration' 2010-May-05 22:52:48 LOG5 begin_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2010-May-05 22:52:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 22:52:48 START begin_task: Starting task 'selecting calibration type' 2010-May-05 22:52:48 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2010-May-05 22:52:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 22:52:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 22:52:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 22:52:48 START begin_task: Starting task 'waiting on setcal' 2010-May-05 22:52:48 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2010-May-05 22:52:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4175320648 -CF 2010-May-05 22:52:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:52:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 22:52:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 22:52:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:52:48 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 22:52:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 22:52:48 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2010-May-05 22:52:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 22:52:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 22:52:48 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 22:52:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 22:52:48 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2010-May-05 22:52:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 22:52:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 22:52:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 22:52:49 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2010-May-05 22:52:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 22:52:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 22:52:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 22:52:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 22:52:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 22:52:49 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2010-May-05 22:52:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 22:52:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 22:52:49 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2010-May-05 22:52:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 22:52:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 22:52:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 22:52:49 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2010-May-05 22:52:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 22:52:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 22:52:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 22:52:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 22:52:49 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2010-May-05 22:52:49 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 22:52:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 22:52:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 22:52:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 22:52:49 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2010-May-05 22:52:49 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 22:52:49 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 22:52:49 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2010-May-05 22:52:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 22:52:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 22:52:49 INFO2 take_data: Starting WAPP 1-second scan: 12500146 2010-May-05 22:52:49 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 22:52:49 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2010-May-05 22:52:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 22:52:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 22:52:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10370.00 2010-May-05 22:52:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 22:52:51 LOG3 WAPP=1+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:51 LOG3 WAPP=3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:51 LOG3 WAPP=3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:51 LOG3 WAPP=1+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:51 LOG3 WAPP=3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:51 LOG3 WAPP=2-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:51 LOG3 WAPP=1+2-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:51 LOG3 WAPP=1+2-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:51 LOG3 WAPP=1+2-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:51 LOG3 WAPP=2-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 22:52:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 22:52:51 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2010-May-05 22:52:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 22:52:51 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2010-May-05 22:52:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 22:52:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 22:52:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 22:52:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 22:52:51 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2010-May-05 22:52:52 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 22:52:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 22:52:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 22:52:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 22:52:52 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2010-May-05 22:52:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 22:52:52 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 22:52:52 LOG5 finish_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2010-May-05 22:52:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 22:52:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 22:52:52 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 22:52:52 LOG5 end_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2010-May-05 22:52:52 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 24 of 99 2010-May-05 22:52:52 LOG4 send_obs_status: To obs_status: <1> LOOP 24 2010-May-05 22:52:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 22:52:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 22:52:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 22:52:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 22:52:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 22:52:52 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 22:52:52 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 22:52:52 LOG5 begin_task: Level: (2) ID = <10296> Status = 0 0 0 0 ok 2010-May-05 22:52:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 22:52:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 22:52:52 INFO2 take_data: Starting WAPP 600-second scan: 12500147 2010-May-05 22:52:52 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 22:52:52 LOG5 begin_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2010-May-05 22:52:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 22:52:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 22:52:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 22:52:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10373.00 2010-May-05 22:52:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0032.fits 2010-May-05 22:52:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0032.fits} 2010-May-05 22:52:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 22:52:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 22:52:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:02:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 23:02:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 23:02:53 LOG5 end_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2010-May-05 23:02:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 23:02:53 LOG5 end_task: Level: (2) ID = <10296> Status = 0 0 0 0 ok 2010-May-05 23:02:53 LOG1 fixed_driftmap: New position: year = 2010.3448606041018 RA = 13:30:50.3 RA/Dec = 13:31:21.7 +26:46:19.8 2010-May-05 23:02:53 NOTE fixed_driftmap: Correcting ZA to 8:25:06.1 ... 2010-May-05 23:02:53 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4183671453 -CF 2010-May-05 23:02:53 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 23:02:53 START begin_task: Starting task 'WAPP calibration' 2010-May-05 23:02:53 LOG5 begin_task: Level: (2) ID = <10298> Status = 0 0 0 0 ok 2010-May-05 23:02:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 23:02:53 START begin_task: Starting task 'selecting calibration type' 2010-May-05 23:02:53 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2010-May-05 23:02:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 23:02:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 23:02:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 23:02:53 START begin_task: Starting task 'waiting on setcal' 2010-May-05 23:02:53 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2010-May-05 23:02:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4183671453 -CF 2010-May-05 23:02:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:02:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 23:02:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 23:02:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:02:54 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 23:02:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 23:02:54 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2010-May-05 23:02:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 23:02:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 23:02:54 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 23:02:54 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 23:02:54 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2010-May-05 23:02:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:02:54 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 23:02:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 23:02:54 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2010-May-05 23:02:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 23:02:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 23:02:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 23:02:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 23:02:54 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 23:02:54 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2010-May-05 23:02:54 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 23:02:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 23:02:54 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2010-May-05 23:02:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 23:02:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 23:02:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 23:02:54 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2010-May-05 23:02:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 23:02:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 23:02:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 23:02:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 23:02:54 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2010-May-05 23:02:54 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 23:02:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 23:02:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 23:02:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 23:02:54 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2010-May-05 23:02:54 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 23:02:54 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 23:02:54 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2010-May-05 23:02:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 23:02:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 23:02:54 INFO2 take_data: Starting WAPP 1-second scan: 12500148 2010-May-05 23:02:55 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 23:02:55 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2010-May-05 23:02:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 23:02:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 23:02:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10976.00 2010-May-05 23:02:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 23:02:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:02:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:02:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:02:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:02:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:02:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:02:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:02:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:02:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 23:02:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 23:02:57 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2010-May-05 23:02:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 23:02:57 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2010-May-05 23:02:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 23:02:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 23:02:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 23:02:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 23:02:57 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2010-May-05 23:02:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 23:02:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 23:02:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 23:02:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 23:02:57 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2010-May-05 23:02:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 23:02:57 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 23:02:57 LOG5 finish_task: Level: (2) ID = <10298> Status = 0 0 0 0 ok 2010-May-05 23:02:57 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 23:02:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 23:02:57 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 23:02:57 LOG5 end_task: Level: (2) ID = <10298> Status = 0 0 0 0 ok 2010-May-05 23:02:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 25 of 99 2010-May-05 23:02:57 LOG4 send_obs_status: To obs_status: <1> LOOP 25 2010-May-05 23:02:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 23:02:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 23:02:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 23:02:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 23:02:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 23:02:58 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 23:02:58 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 23:02:58 LOG5 begin_task: Level: (2) ID = <10307> Status = 0 0 0 0 ok 2010-May-05 23:02:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 23:02:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 23:02:58 INFO2 take_data: Starting WAPP 600-second scan: 12500149 2010-May-05 23:02:58 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 23:02:58 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2010-May-05 23:02:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 23:02:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 23:02:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 23:02:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10979.00 2010-May-05 23:02:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0033.fits 2010-May-05 23:02:58 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0033.fits} 2010-May-05 23:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 23:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:12:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 23:12:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 23:12:59 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2010-May-05 23:12:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 23:12:59 LOG5 end_task: Level: (2) ID = <10307> Status = 0 0 0 0 ok 2010-May-05 23:12:59 LOG1 fixed_driftmap: New position: year = 2010.3448798070831 RA = 13:40:58.3 RA/Dec = 13:41:29.4 +26:46:23.2 2010-May-05 23:12:59 NOTE fixed_driftmap: Correcting ZA to 8:25:09.5 ... 2010-May-05 23:12:59 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4193088474 -CF 2010-May-05 23:12:59 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 23:12:59 START begin_task: Starting task 'WAPP calibration' 2010-May-05 23:12:59 LOG5 begin_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2010-May-05 23:12:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 23:12:59 START begin_task: Starting task 'selecting calibration type' 2010-May-05 23:12:59 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-May-05 23:12:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 23:12:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 23:12:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 23:12:59 START begin_task: Starting task 'waiting on setcal' 2010-May-05 23:12:59 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2010-May-05 23:12:59 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4193088474 -CF 2010-May-05 23:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:12:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 23:12:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 23:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:12:59 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 23:12:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 23:12:59 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2010-May-05 23:12:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 23:12:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 23:12:59 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 23:12:59 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 23:12:59 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2010-May-05 23:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:13:00 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 23:13:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 23:13:00 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2010-May-05 23:13:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 23:13:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 23:13:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 23:13:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 23:13:00 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 23:13:00 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2010-May-05 23:13:00 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 23:13:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 23:13:00 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2010-May-05 23:13:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 23:13:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 23:13:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 23:13:00 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-May-05 23:13:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 23:13:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 23:13:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 23:13:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 23:13:00 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2010-May-05 23:13:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 23:13:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 23:13:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 23:13:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 23:13:01 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2010-May-05 23:13:01 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 23:13:01 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 23:13:01 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2010-May-05 23:13:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 23:13:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 23:13:01 INFO2 take_data: Starting WAPP 1-second scan: 12500150 2010-May-05 23:13:01 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 23:13:01 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2010-May-05 23:13:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 23:13:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 23:13:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11582.00 2010-May-05 23:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 23:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 23:13:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 23:13:03 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2010-May-05 23:13:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 23:13:03 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2010-May-05 23:13:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 23:13:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 23:13:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 23:13:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 23:13:03 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2010-May-05 23:13:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 23:13:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 23:13:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 23:13:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 23:13:03 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2010-May-05 23:13:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 23:13:03 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 23:13:03 LOG5 finish_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2010-May-05 23:13:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 23:13:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 23:13:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 23:13:03 LOG5 end_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2010-May-05 23:13:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 26 of 99 2010-May-05 23:13:03 LOG4 send_obs_status: To obs_status: <1> LOOP 26 2010-May-05 23:13:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 23:13:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 23:13:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 23:13:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 23:13:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 23:13:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 23:13:04 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 23:13:04 LOG5 begin_task: Level: (2) ID = <10318> Status = 0 0 0 0 ok 2010-May-05 23:13:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 23:13:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 23:13:04 INFO2 take_data: Starting WAPP 600-second scan: 12500151 2010-May-05 23:13:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 23:13:04 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2010-May-05 23:13:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 23:13:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 23:13:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 23:13:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11585.00 2010-May-05 23:13:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0034.fits 2010-May-05 23:13:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0034.fits} 2010-May-05 23:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 23:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 23:23:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 23:23:05 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2010-May-05 23:23:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 23:23:05 LOG5 end_task: Level: (2) ID = <10318> Status = 0 0 0 0 ok 2010-May-05 23:23:05 LOG1 fixed_driftmap: New position: year = 2010.3448990100642 RA = 13:51:06.2 RA/Dec = 13:51:37.0 +26:46:27.0 2010-May-05 23:23:05 NOTE fixed_driftmap: Correcting ZA to 8:25:13.3 ... 2010-May-05 23:23:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4203540359 -CF 2010-May-05 23:23:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 23:23:05 START begin_task: Starting task 'WAPP calibration' 2010-May-05 23:23:05 LOG5 begin_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2010-May-05 23:23:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 23:23:05 START begin_task: Starting task 'selecting calibration type' 2010-May-05 23:23:05 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-May-05 23:23:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 23:23:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 23:23:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 23:23:05 START begin_task: Starting task 'waiting on setcal' 2010-May-05 23:23:05 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2010-May-05 23:23:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4203540359 -CF 2010-May-05 23:23:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:23:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 23:23:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 23:23:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:23:05 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 23:23:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 23:23:05 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2010-May-05 23:23:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 23:23:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 23:23:05 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 23:23:05 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 23:23:05 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2010-May-05 23:23:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:23:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 23:23:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 23:23:06 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2010-May-05 23:23:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 23:23:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 23:23:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 23:23:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 23:23:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 23:23:06 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2010-May-05 23:23:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 23:23:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 23:23:06 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2010-May-05 23:23:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 23:23:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 23:23:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 23:23:06 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-May-05 23:23:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 23:23:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 23:23:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 23:23:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 23:23:06 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2010-May-05 23:23:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 23:23:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 23:23:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 23:23:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 23:23:06 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2010-May-05 23:23:06 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 23:23:06 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 23:23:06 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2010-May-05 23:23:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 23:23:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 23:23:06 INFO2 take_data: Starting WAPP 1-second scan: 12500152 2010-May-05 23:23:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 23:23:06 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2010-May-05 23:23:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 23:23:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 23:23:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12187.00 2010-May-05 23:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 23:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 23:23:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 23:23:08 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2010-May-05 23:23:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 23:23:08 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2010-May-05 23:23:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 23:23:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 23:23:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 23:23:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 23:23:08 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2010-May-05 23:23:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 23:23:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 23:23:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 23:23:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 23:23:09 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2010-May-05 23:23:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 23:23:09 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 23:23:09 LOG5 finish_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2010-May-05 23:23:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 23:23:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 23:23:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 23:23:09 LOG5 end_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2010-May-05 23:23:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 27 of 99 2010-May-05 23:23:09 LOG4 send_obs_status: To obs_status: <1> LOOP 27 2010-May-05 23:23:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 23:23:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 23:23:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 23:23:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 23:23:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 23:23:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 23:23:09 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 23:23:09 LOG5 begin_task: Level: (2) ID = <10329> Status = 0 0 0 0 ok 2010-May-05 23:23:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 23:23:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 23:23:09 INFO2 take_data: Starting WAPP 600-second scan: 12500153 2010-May-05 23:23:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 23:23:09 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2010-May-05 23:23:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 23:23:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 23:23:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 23:23:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12190.00 2010-May-05 23:23:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0035.fits 2010-May-05 23:23:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0035.fits} 2010-May-05 23:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 23:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 23:33:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 23:33:10 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2010-May-05 23:33:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 23:33:10 LOG5 end_task: Level: (2) ID = <10329> Status = 0 0 0 0 ok 2010-May-05 23:33:10 LOG1 fixed_driftmap: New position: year = 2010.3449181813573 RA = 14:01:13.1 RA/Dec = 14:01:43.7 +26:46:31.1 2010-May-05 23:33:10 NOTE fixed_driftmap: Correcting ZA to 8:25:17.4 ... 2010-May-05 23:33:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4214986908 -CF 2010-May-05 23:33:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 23:33:10 START begin_task: Starting task 'WAPP calibration' 2010-May-05 23:33:10 LOG5 begin_task: Level: (2) ID = <10331> Status = 0 0 0 0 ok 2010-May-05 23:33:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 23:33:10 START begin_task: Starting task 'selecting calibration type' 2010-May-05 23:33:10 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2010-May-05 23:33:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 23:33:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 23:33:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 23:33:10 START begin_task: Starting task 'waiting on setcal' 2010-May-05 23:33:10 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2010-May-05 23:33:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4214986908 -CF 2010-May-05 23:33:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:33:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 23:33:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 23:33:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:33:11 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 23:33:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 23:33:11 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2010-May-05 23:33:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 23:33:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 23:33:11 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 23:33:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 23:33:11 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2010-May-05 23:33:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:33:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 23:33:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 23:33:11 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2010-May-05 23:33:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 23:33:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 23:33:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 23:33:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 23:33:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 23:33:11 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2010-May-05 23:33:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 23:33:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 23:33:11 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2010-May-05 23:33:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 23:33:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 23:33:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 23:33:11 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2010-May-05 23:33:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 23:33:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 23:33:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 23:33:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 23:33:11 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-May-05 23:33:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 23:33:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 23:33:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 23:33:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 23:33:11 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-May-05 23:33:11 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 23:33:11 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 23:33:11 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2010-May-05 23:33:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 23:33:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 23:33:11 INFO2 take_data: Starting WAPP 1-second scan: 12500154 2010-May-05 23:33:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 23:33:12 LOG5 begin_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2010-May-05 23:33:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 23:33:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 23:33:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12793.00 2010-May-05 23:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 23:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 23:33:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 23:33:14 LOG5 end_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2010-May-05 23:33:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 23:33:14 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2010-May-05 23:33:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 23:33:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 23:33:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 23:33:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 23:33:14 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2010-May-05 23:33:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 23:33:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 23:33:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 23:33:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 23:33:14 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2010-May-05 23:33:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 23:33:14 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 23:33:14 LOG5 finish_task: Level: (2) ID = <10331> Status = 0 0 0 0 ok 2010-May-05 23:33:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 23:33:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 23:33:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 23:33:14 LOG5 end_task: Level: (2) ID = <10331> Status = 0 0 0 0 ok 2010-May-05 23:33:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 28 of 99 2010-May-05 23:33:14 LOG4 send_obs_status: To obs_status: <1> LOOP 28 2010-May-05 23:33:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 23:33:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 23:33:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 23:33:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 23:33:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 23:33:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 23:33:15 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 23:33:15 LOG5 begin_task: Level: (2) ID = <10340> Status = 0 0 0 0 ok 2010-May-05 23:33:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 23:33:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 23:33:15 INFO2 take_data: Starting WAPP 600-second scan: 12500155 2010-May-05 23:33:15 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 23:33:15 LOG5 begin_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2010-May-05 23:33:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 23:33:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 23:33:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 23:33:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12796.00 2010-May-05 23:33:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0036.fits 2010-May-05 23:33:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0036.fits} 2010-May-05 23:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 23:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:33:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 23:43:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 23:43:16 LOG5 end_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2010-May-05 23:43:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 23:43:16 LOG5 end_task: Level: (2) ID = <10340> Status = 0 0 0 0 ok 2010-May-05 23:43:16 LOG1 fixed_driftmap: New position: year = 2010.3449373843384 RA = 14:11:21.0 RA/Dec = 14:11:51.4 +26:46:35.6 2010-May-05 23:43:16 NOTE fixed_driftmap: Correcting ZA to 8:25:21.9 ... 2010-May-05 23:43:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4227443627 -CF 2010-May-05 23:43:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 23:43:16 START begin_task: Starting task 'WAPP calibration' 2010-May-05 23:43:16 LOG5 begin_task: Level: (2) ID = <10342> Status = 0 0 0 0 ok 2010-May-05 23:43:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 23:43:16 START begin_task: Starting task 'selecting calibration type' 2010-May-05 23:43:16 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2010-May-05 23:43:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 23:43:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 23:43:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 23:43:16 START begin_task: Starting task 'waiting on setcal' 2010-May-05 23:43:16 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2010-May-05 23:43:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4227443627 -CF 2010-May-05 23:43:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:43:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 23:43:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 23:43:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:43:16 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 23:43:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 23:43:16 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2010-May-05 23:43:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 23:43:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 23:43:16 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 23:43:16 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 23:43:16 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2010-May-05 23:43:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:43:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 23:43:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 23:43:17 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2010-May-05 23:43:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 23:43:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 23:43:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 23:43:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 23:43:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 23:43:17 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2010-May-05 23:43:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 23:43:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 23:43:17 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2010-May-05 23:43:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 23:43:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 23:43:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 23:43:17 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2010-May-05 23:43:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 23:43:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 23:43:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 23:43:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 23:43:17 LOG5 begin_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2010-May-05 23:43:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 23:43:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 23:43:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 23:43:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 23:43:17 LOG5 end_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2010-May-05 23:43:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 23:43:17 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 23:43:17 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2010-May-05 23:43:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 23:43:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 23:43:17 INFO2 take_data: Starting WAPP 1-second scan: 12500156 2010-May-05 23:43:17 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 23:43:17 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2010-May-05 23:43:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 23:43:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 23:43:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13398.00 2010-May-05 23:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 23:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 23:43:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 23:43:19 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2010-May-05 23:43:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 23:43:19 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2010-May-05 23:43:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 23:43:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 23:43:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 23:43:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 23:43:19 LOG5 begin_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2010-May-05 23:43:20 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 23:43:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 23:43:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 23:43:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 23:43:20 LOG5 end_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2010-May-05 23:43:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 23:43:20 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 23:43:20 LOG5 finish_task: Level: (2) ID = <10342> Status = 0 0 0 0 ok 2010-May-05 23:43:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 23:43:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 23:43:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 23:43:20 LOG5 end_task: Level: (2) ID = <10342> Status = 0 0 0 0 ok 2010-May-05 23:43:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 29 of 99 2010-May-05 23:43:20 LOG4 send_obs_status: To obs_status: <1> LOOP 29 2010-May-05 23:43:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 23:43:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 23:43:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 23:43:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 23:43:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 23:43:20 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 23:43:20 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 23:43:20 LOG5 begin_task: Level: (2) ID = <10351> Status = 0 0 0 0 ok 2010-May-05 23:43:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 23:43:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 23:43:20 INFO2 take_data: Starting WAPP 600-second scan: 12500157 2010-May-05 23:43:20 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 23:43:20 LOG5 begin_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2010-May-05 23:43:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 23:43:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 23:43:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 23:43:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13401.00 2010-May-05 23:43:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0037.fits 2010-May-05 23:43:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0037.fits} 2010-May-05 23:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 23:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 23:53:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 23:53:21 LOG5 end_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2010-May-05 23:53:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 23:53:21 LOG5 end_task: Level: (2) ID = <10351> Status = 0 0 0 0 ok 2010-May-05 23:53:21 LOG1 fixed_driftmap: New position: year = 2010.3449565556316 RA = 14:21:27.9 RA/Dec = 14:21:58.0 +26:46:40.4 2010-May-05 23:53:21 NOTE fixed_driftmap: Correcting ZA to 8:25:26.7 ... 2010-May-05 23:53:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4240845097 -CF 2010-May-05 23:53:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-05 23:53:21 START begin_task: Starting task 'WAPP calibration' 2010-May-05 23:53:21 LOG5 begin_task: Level: (2) ID = <10353> Status = 0 0 0 0 ok 2010-May-05 23:53:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-05 23:53:21 START begin_task: Starting task 'selecting calibration type' 2010-May-05 23:53:21 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2010-May-05 23:53:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-05 23:53:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-05 23:53:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-05 23:53:21 START begin_task: Starting task 'waiting on setcal' 2010-May-05 23:53:21 LOG5 begin_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2010-May-05 23:53:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4240845097 -CF 2010-May-05 23:53:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:53:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-05 23:53:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-05 23:53:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:53:22 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-05 23:53:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-05 23:53:22 LOG5 end_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2010-May-05 23:53:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-05 23:53:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 23:53:22 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-05 23:53:22 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 23:53:22 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2010-May-05 23:53:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-05 23:53:22 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 23:53:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 23:53:22 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2010-May-05 23:53:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 23:53:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-05 23:53:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-05 23:53:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-05 23:53:22 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-05 23:53:22 LOG5 begin_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2010-May-05 23:53:22 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-05 23:53:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-05 23:53:22 LOG5 end_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2010-May-05 23:53:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-05 23:53:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-05 23:53:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-05 23:53:22 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2010-May-05 23:53:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-05 23:53:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-05 23:53:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-05 23:53:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 23:53:22 LOG5 begin_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2010-May-05 23:53:22 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 23:53:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-05 23:53:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 23:53:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 23:53:22 LOG5 end_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2010-May-05 23:53:22 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-05 23:53:22 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 23:53:22 LOG5 begin_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2010-May-05 23:53:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-05 23:53:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 23:53:22 INFO2 take_data: Starting WAPP 1-second scan: 12500158 2010-May-05 23:53:23 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 23:53:23 LOG5 begin_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2010-May-05 23:53:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 23:53:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-05 23:53:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14004.00 2010-May-05 23:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 23:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-05 23:53:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-05 23:53:25 LOG5 end_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2010-May-05 23:53:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-05 23:53:25 LOG5 end_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2010-May-05 23:53:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-05 23:53:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-05 23:53:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-05 23:53:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-05 23:53:25 LOG5 begin_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2010-May-05 23:53:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-05 23:53:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-05 23:53:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-05 23:53:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-05 23:53:25 LOG5 end_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2010-May-05 23:53:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-05 23:53:25 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-05 23:53:25 LOG5 finish_task: Level: (2) ID = <10353> Status = 0 0 0 0 ok 2010-May-05 23:53:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-05 23:53:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-05 23:53:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-05 23:53:25 LOG5 end_task: Level: (2) ID = <10353> Status = 0 0 0 0 ok 2010-May-05 23:53:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 30 of 99 2010-May-05 23:53:26 LOG4 send_obs_status: To obs_status: <1> LOOP 30 2010-May-05 23:53:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-05 23:53:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-05 23:53:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-05 23:53:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-05 23:53:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-05 23:53:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-05 23:53:26 START begin_task: Starting task 'WAPP spectral observation' 2010-May-05 23:53:26 LOG5 begin_task: Level: (2) ID = <10362> Status = 0 0 0 0 ok 2010-May-05 23:53:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-05 23:53:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-05 23:53:26 INFO2 take_data: Starting WAPP 600-second scan: 12500159 2010-May-05 23:53:26 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-05 23:53:26 LOG5 begin_task: Level: (3) ID = <10363> Status = 0 0 0 0 ok 2010-May-05 23:53:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-05 23:53:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-05 23:53:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-05 23:53:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14007.00 2010-May-05 23:53:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20100505.a2010.0038.fits 2010-May-05 23:53:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100505.a2010.0038.fits} 2010-May-05 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-05 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-05 23:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 00:03:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 00:03:27 LOG5 end_task: Level: (3) ID = <10363> Status = 0 0 0 0 ok 2010-May-06 00:03:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 00:03:27 LOG5 end_task: Level: (2) ID = <10362> Status = 0 0 0 0 ok 2010-May-06 00:03:27 LOG1 fixed_driftmap: New position: year = 2010.3449757586129 RA = 14:31:35.8 RA/Dec = 14:32:05.7 +26:46:45.6 2010-May-06 00:03:27 NOTE fixed_driftmap: Correcting ZA to 8:25:31.9 ... 2010-May-06 00:03:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4255209392 -CF 2010-May-06 00:03:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-06 00:03:27 START begin_task: Starting task 'WAPP calibration' 2010-May-06 00:03:27 LOG5 begin_task: Level: (2) ID = <10364> Status = 0 0 0 0 ok 2010-May-06 00:03:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-06 00:03:27 START begin_task: Starting task 'selecting calibration type' 2010-May-06 00:03:27 LOG5 begin_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2010-May-06 00:03:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-06 00:03:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-06 00:03:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-06 00:03:27 START begin_task: Starting task 'waiting on setcal' 2010-May-06 00:03:27 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2010-May-06 00:03:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4255209392 -CF 2010-May-06 00:03:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:03:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-06 00:03:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-06 00:03:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:03:27 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-06 00:03:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-06 00:03:27 LOG5 end_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2010-May-06 00:03:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-06 00:03:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 00:03:27 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-06 00:03:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 00:03:27 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2010-May-06 00:03:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:03:28 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 00:03:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 00:03:28 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2010-May-06 00:03:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 00:03:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-06 00:03:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 00:03:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-06 00:03:28 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 00:03:28 LOG5 begin_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2010-May-06 00:03:28 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 00:03:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 00:03:28 LOG5 end_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2010-May-06 00:03:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 00:03:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-06 00:03:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-06 00:03:28 LOG5 end_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2010-May-06 00:03:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-06 00:03:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-06 00:03:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-06 00:03:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 00:03:28 LOG5 begin_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2010-May-06 00:03:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 00:03:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-06 00:03:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 00:03:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 00:03:28 LOG5 end_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2010-May-06 00:03:28 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-06 00:03:28 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 00:03:28 LOG5 begin_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2010-May-06 00:03:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-06 00:03:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 00:03:28 INFO2 take_data: Starting WAPP 1-second scan: 12600001 2010-May-06 00:03:28 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 00:03:28 LOG5 begin_task: Level: (4) ID = <10371> Status = 0 0 0 0 ok 2010-May-06 00:03:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 00:03:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-06 00:03:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14609.00 2010-May-06 00:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 00:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:30 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:30 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 00:03:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 00:03:30 LOG5 end_task: Level: (4) ID = <10371> Status = 0 0 0 0 ok 2010-May-06 00:03:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 00:03:30 LOG5 end_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2010-May-06 00:03:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-06 00:03:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-06 00:03:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-06 00:03:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 00:03:30 LOG5 begin_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2010-May-06 00:03:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 00:03:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-06 00:03:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 00:03:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 00:03:31 LOG5 end_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2010-May-06 00:03:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-06 00:03:31 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-06 00:03:31 LOG5 finish_task: Level: (2) ID = <10364> Status = 0 0 0 0 ok 2010-May-06 00:03:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-06 00:03:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 00:03:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-06 00:03:31 LOG5 end_task: Level: (2) ID = <10364> Status = 0 0 0 0 ok 2010-May-06 00:03:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 31 of 99 2010-May-06 00:03:31 LOG4 send_obs_status: To obs_status: <1> LOOP 31 2010-May-06 00:03:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-06 00:03:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-06 00:03:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-06 00:03:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-06 00:03:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-06 00:03:31 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-06 00:03:31 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 00:03:31 LOG5 begin_task: Level: (2) ID = <10373> Status = 0 0 0 0 ok 2010-May-06 00:03:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-06 00:03:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 00:03:31 INFO2 take_data: Starting WAPP 600-second scan: 12600002 2010-May-06 00:03:31 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 00:03:31 LOG5 begin_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2010-May-06 00:03:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-06 00:03:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 00:03:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-06 00:03:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14612.00 2010-May-06 00:03:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20100506.a2010.0000.fits 2010-May-06 00:03:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100506.a2010.0000.fits} 2010-May-06 00:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 00:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 00:13:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 00:13:32 LOG5 end_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2010-May-06 00:13:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 00:13:32 LOG5 end_task: Level: (2) ID = <10373> Status = 0 0 0 0 ok 2010-May-06 00:13:32 LOG1 fixed_driftmap: New position: year = 2010.3449949299059 RA = 14:41:42.7 RA/Dec = 14:42:12.3 +26:46:51.1 2010-May-06 00:13:32 NOTE fixed_driftmap: Correcting ZA to 8:25:37.4 ... 2010-May-06 00:13:32 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4270461157 -CF 2010-May-06 00:13:32 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-06 00:13:32 START begin_task: Starting task 'WAPP calibration' 2010-May-06 00:13:32 LOG5 begin_task: Level: (2) ID = <10375> Status = 0 0 0 0 ok 2010-May-06 00:13:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-06 00:13:32 START begin_task: Starting task 'selecting calibration type' 2010-May-06 00:13:32 LOG5 begin_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2010-May-06 00:13:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-06 00:13:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-06 00:13:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-06 00:13:32 START begin_task: Starting task 'waiting on setcal' 2010-May-06 00:13:32 LOG5 begin_task: Level: (4) ID = <10377> Status = 0 0 0 0 ok 2010-May-06 00:13:32 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4270461157 -CF 2010-May-06 00:13:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:13:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-06 00:13:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-06 00:13:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:13:33 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-06 00:13:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-06 00:13:33 LOG5 end_task: Level: (4) ID = <10377> Status = 0 0 0 0 ok 2010-May-06 00:13:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-06 00:13:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 00:13:33 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-06 00:13:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 00:13:33 LOG5 begin_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2010-May-06 00:13:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:13:33 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 00:13:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 00:13:33 LOG5 end_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2010-May-06 00:13:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 00:13:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-06 00:13:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 00:13:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-06 00:13:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 00:13:33 LOG5 begin_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2010-May-06 00:13:33 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 00:13:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 00:13:33 LOG5 end_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2010-May-06 00:13:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 00:13:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-06 00:13:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-06 00:13:33 LOG5 end_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2010-May-06 00:13:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-06 00:13:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-06 00:13:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-06 00:13:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 00:13:33 LOG5 begin_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2010-May-06 00:13:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 00:13:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-06 00:13:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 00:13:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 00:13:33 LOG5 end_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2010-May-06 00:13:33 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-06 00:13:33 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 00:13:33 LOG5 begin_task: Level: (3) ID = <10381> Status = 0 0 0 0 ok 2010-May-06 00:13:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-06 00:13:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 00:13:33 INFO2 take_data: Starting WAPP 1-second scan: 12600003 2010-May-06 00:13:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 00:13:34 LOG5 begin_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2010-May-06 00:13:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 00:13:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-06 00:13:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15215.00 2010-May-06 00:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 00:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 00:13:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 00:13:36 LOG5 end_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2010-May-06 00:13:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 00:13:36 LOG5 end_task: Level: (3) ID = <10381> Status = 0 0 0 0 ok 2010-May-06 00:13:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-06 00:13:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-06 00:13:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-06 00:13:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 00:13:36 LOG5 begin_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2010-May-06 00:13:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 00:13:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-06 00:13:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 00:13:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 00:13:36 LOG5 end_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2010-May-06 00:13:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-06 00:13:36 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-06 00:13:36 LOG5 finish_task: Level: (2) ID = <10375> Status = 0 0 0 0 ok 2010-May-06 00:13:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-06 00:13:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 00:13:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-06 00:13:36 LOG5 end_task: Level: (2) ID = <10375> Status = 0 0 0 0 ok 2010-May-06 00:13:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 32 of 99 2010-May-06 00:13:36 LOG4 send_obs_status: To obs_status: <1> LOOP 32 2010-May-06 00:13:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-06 00:13:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-06 00:13:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-06 00:13:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-06 00:13:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-06 00:13:37 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-06 00:13:37 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 00:13:37 LOG5 begin_task: Level: (2) ID = <10384> Status = 0 0 0 0 ok 2010-May-06 00:13:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-06 00:13:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 00:13:37 INFO2 take_data: Starting WAPP 600-second scan: 12600004 2010-May-06 00:13:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 00:13:37 LOG5 begin_task: Level: (3) ID = <10385> Status = 0 0 0 0 ok 2010-May-06 00:13:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-06 00:13:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 00:13:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-06 00:13:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15218.00 2010-May-06 00:13:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20100506.a2010.0001.fits 2010-May-06 00:13:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100506.a2010.0001.fits} 2010-May-06 00:13:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 00:13:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:13:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 00:23:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 00:23:38 LOG5 end_task: Level: (3) ID = <10385> Status = 0 0 0 0 ok 2010-May-06 00:23:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 00:23:38 LOG5 end_task: Level: (2) ID = <10384> Status = 0 0 0 0 ok 2010-May-06 00:23:38 LOG1 fixed_driftmap: New position: year = 2010.3450141328872 RA = 14:51:50.6 RA/Dec = 14:52:20.0 +26:46:56.9 2010-May-06 00:23:38 NOTE fixed_driftmap: Correcting ZA to 8:25:43.2 ... 2010-May-06 00:23:38 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4286620970 -CF 2010-May-06 00:23:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-06 00:23:38 START begin_task: Starting task 'WAPP calibration' 2010-May-06 00:23:38 LOG5 begin_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2010-May-06 00:23:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-06 00:23:38 START begin_task: Starting task 'selecting calibration type' 2010-May-06 00:23:38 LOG5 begin_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2010-May-06 00:23:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-06 00:23:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-06 00:23:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-06 00:23:38 START begin_task: Starting task 'waiting on setcal' 2010-May-06 00:23:38 LOG5 begin_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2010-May-06 00:23:38 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4286620970 -CF 2010-May-06 00:23:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:23:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-06 00:23:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-06 00:23:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:23:38 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-06 00:23:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-06 00:23:38 LOG5 end_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2010-May-06 00:23:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-06 00:23:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 00:23:38 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-06 00:23:38 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 00:23:38 LOG5 begin_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2010-May-06 00:23:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:23:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 00:23:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 00:23:39 LOG5 end_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2010-May-06 00:23:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 00:23:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-06 00:23:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 00:23:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-06 00:23:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 00:23:39 LOG5 begin_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2010-May-06 00:23:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 00:23:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 00:23:39 LOG5 end_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2010-May-06 00:23:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 00:23:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-06 00:23:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-06 00:23:39 LOG5 end_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2010-May-06 00:23:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-06 00:23:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-06 00:23:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-06 00:23:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 00:23:39 LOG5 begin_task: Level: (3) ID = <10391> Status = 0 0 0 0 ok 2010-May-06 00:23:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 00:23:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-06 00:23:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 00:23:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 00:23:39 LOG5 end_task: Level: (3) ID = <10391> Status = 0 0 0 0 ok 2010-May-06 00:23:39 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-06 00:23:39 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 00:23:39 LOG5 begin_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2010-May-06 00:23:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-06 00:23:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 00:23:39 INFO2 take_data: Starting WAPP 1-second scan: 12600005 2010-May-06 00:23:39 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 00:23:39 LOG5 begin_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2010-May-06 00:23:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 00:23:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-06 00:23:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15820.00 2010-May-06 00:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 00:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 00:23:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 00:23:41 LOG5 end_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2010-May-06 00:23:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 00:23:41 LOG5 end_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2010-May-06 00:23:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-06 00:23:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-06 00:23:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-06 00:23:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 00:23:41 LOG5 begin_task: Level: (3) ID = <10394> Status = 0 0 0 0 ok 2010-May-06 00:23:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 00:23:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-06 00:23:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 00:23:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 00:23:42 LOG5 end_task: Level: (3) ID = <10394> Status = 0 0 0 0 ok 2010-May-06 00:23:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-06 00:23:42 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-06 00:23:42 LOG5 finish_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2010-May-06 00:23:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-06 00:23:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 00:23:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-06 00:23:42 LOG5 end_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2010-May-06 00:23:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 33 of 99 2010-May-06 00:23:42 LOG4 send_obs_status: To obs_status: <1> LOOP 33 2010-May-06 00:23:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-06 00:23:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-06 00:23:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-06 00:23:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-06 00:23:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-06 00:23:42 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-06 00:23:42 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 00:23:42 LOG5 begin_task: Level: (2) ID = <10395> Status = 0 0 0 0 ok 2010-May-06 00:23:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-06 00:23:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 00:23:42 INFO2 take_data: Starting WAPP 600-second scan: 12600006 2010-May-06 00:23:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 00:23:42 LOG5 begin_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2010-May-06 00:23:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-06 00:23:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 00:23:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-06 00:23:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15823.00 2010-May-06 00:23:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20100506.a2010.0002.fits 2010-May-06 00:23:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100506.a2010.0002.fits} 2010-May-06 00:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 00:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 00:33:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 00:33:43 LOG5 end_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2010-May-06 00:33:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 00:33:43 LOG5 end_task: Level: (2) ID = <10395> Status = 0 0 0 0 ok 2010-May-06 00:33:43 LOG1 fixed_driftmap: New position: year = 2010.3450333041803 RA = 15:01:57.5 RA/Dec = 15:02:26.6 +26:47:03.0 2010-May-06 00:33:43 NOTE fixed_driftmap: Correcting ZA to 8:25:49.3 ... 2010-May-06 00:33:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4303603957 -CF 2010-May-06 00:33:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-06 00:33:43 START begin_task: Starting task 'WAPP calibration' 2010-May-06 00:33:43 LOG5 begin_task: Level: (2) ID = <10397> Status = 0 0 0 0 ok 2010-May-06 00:33:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-06 00:33:43 START begin_task: Starting task 'selecting calibration type' 2010-May-06 00:33:43 LOG5 begin_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2010-May-06 00:33:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-06 00:33:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-06 00:33:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-06 00:33:43 START begin_task: Starting task 'waiting on setcal' 2010-May-06 00:33:43 LOG5 begin_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2010-May-06 00:33:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4303603957 -CF 2010-May-06 00:33:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:33:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-06 00:33:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-06 00:33:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:33:44 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-06 00:33:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-06 00:33:44 LOG5 end_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2010-May-06 00:33:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-06 00:33:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 00:33:44 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-06 00:33:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 00:33:44 LOG5 begin_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2010-May-06 00:33:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:33:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 00:33:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 00:33:44 LOG5 end_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2010-May-06 00:33:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 00:33:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-06 00:33:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 00:33:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-06 00:33:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 00:33:44 LOG5 begin_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2010-May-06 00:33:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 00:33:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 00:33:44 LOG5 end_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2010-May-06 00:33:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 00:33:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-06 00:33:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-06 00:33:44 LOG5 end_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2010-May-06 00:33:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-06 00:33:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-06 00:33:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-06 00:33:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 00:33:44 LOG5 begin_task: Level: (3) ID = <10402> Status = 0 0 0 0 ok 2010-May-06 00:33:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 00:33:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-06 00:33:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 00:33:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 00:33:44 LOG5 end_task: Level: (3) ID = <10402> Status = 0 0 0 0 ok 2010-May-06 00:33:44 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-06 00:33:44 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 00:33:44 LOG5 begin_task: Level: (3) ID = <10403> Status = 0 0 0 0 ok 2010-May-06 00:33:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-06 00:33:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 00:33:44 INFO2 take_data: Starting WAPP 1-second scan: 12600007 2010-May-06 00:33:45 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 00:33:45 LOG5 begin_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2010-May-06 00:33:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 00:33:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-06 00:33:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16426.00 2010-May-06 00:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 00:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 00:33:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 00:33:47 LOG5 end_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2010-May-06 00:33:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 00:33:47 LOG5 end_task: Level: (3) ID = <10403> Status = 0 0 0 0 ok 2010-May-06 00:33:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-06 00:33:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-06 00:33:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-06 00:33:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 00:33:47 LOG5 begin_task: Level: (3) ID = <10405> Status = 0 0 0 0 ok 2010-May-06 00:33:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 00:33:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-06 00:33:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 00:33:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 00:33:47 LOG5 end_task: Level: (3) ID = <10405> Status = 0 0 0 0 ok 2010-May-06 00:33:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-06 00:33:47 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-06 00:33:47 LOG5 finish_task: Level: (2) ID = <10397> Status = 0 0 0 0 ok 2010-May-06 00:33:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-06 00:33:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 00:33:47 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-06 00:33:47 LOG5 end_task: Level: (2) ID = <10397> Status = 0 0 0 0 ok 2010-May-06 00:33:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 34 of 99 2010-May-06 00:33:47 LOG4 send_obs_status: To obs_status: <1> LOOP 34 2010-May-06 00:33:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-06 00:33:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-06 00:33:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-06 00:33:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-06 00:33:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-06 00:33:48 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-06 00:33:48 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 00:33:48 LOG5 begin_task: Level: (2) ID = <10406> Status = 0 0 0 0 ok 2010-May-06 00:33:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-06 00:33:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 00:33:48 INFO2 take_data: Starting WAPP 600-second scan: 12600008 2010-May-06 00:33:48 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 00:33:48 LOG5 begin_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2010-May-06 00:33:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-06 00:33:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 00:33:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-06 00:33:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16429.00 2010-May-06 00:33:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20100506.a2010.0003.fits 2010-May-06 00:33:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100506.a2010.0003.fits} 2010-May-06 00:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 00:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 00:43:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 00:43:49 LOG5 end_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2010-May-06 00:43:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 00:43:49 LOG5 end_task: Level: (2) ID = <10406> Status = 0 0 0 0 ok 2010-May-06 00:43:49 LOG1 fixed_driftmap: New position: year = 2010.3450525071614 RA = 15:12:05.4 RA/Dec = 15:12:34.3 +26:47:09.4 2010-May-06 00:43:49 NOTE fixed_driftmap: Correcting ZA to 8:25:55.7 ... 2010-May-06 00:43:49 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4321433132 -CF 2010-May-06 00:43:49 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-06 00:43:49 START begin_task: Starting task 'WAPP calibration' 2010-May-06 00:43:49 LOG5 begin_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2010-May-06 00:43:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-06 00:43:49 START begin_task: Starting task 'selecting calibration type' 2010-May-06 00:43:49 LOG5 begin_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2010-May-06 00:43:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-06 00:43:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-06 00:43:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-06 00:43:49 START begin_task: Starting task 'waiting on setcal' 2010-May-06 00:43:49 LOG5 begin_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2010-May-06 00:43:49 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4321433132 -CF 2010-May-06 00:43:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:43:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-06 00:43:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-06 00:43:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:43:49 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-06 00:43:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-06 00:43:49 LOG5 end_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2010-May-06 00:43:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-06 00:43:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 00:43:49 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-06 00:43:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 00:43:49 LOG5 begin_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2010-May-06 00:43:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:43:50 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 00:43:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 00:43:50 LOG5 end_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2010-May-06 00:43:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 00:43:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-06 00:43:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 00:43:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-06 00:43:50 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 00:43:50 LOG5 begin_task: Level: (4) ID = <10412> Status = 0 0 0 0 ok 2010-May-06 00:43:50 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 00:43:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 00:43:50 LOG5 end_task: Level: (4) ID = <10412> Status = 0 0 0 0 ok 2010-May-06 00:43:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 00:43:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-06 00:43:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-06 00:43:50 LOG5 end_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2010-May-06 00:43:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-06 00:43:50 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-06 00:43:50 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-06 00:43:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 00:43:50 LOG5 begin_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2010-May-06 00:43:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 00:43:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-06 00:43:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 00:43:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 00:43:51 LOG5 end_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2010-May-06 00:43:51 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-06 00:43:51 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 00:43:51 LOG5 begin_task: Level: (3) ID = <10414> Status = 0 0 0 0 ok 2010-May-06 00:43:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-06 00:43:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 00:43:51 INFO2 take_data: Starting WAPP 1-second scan: 12600009 2010-May-06 00:43:51 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 00:43:51 LOG5 begin_task: Level: (4) ID = <10415> Status = 0 0 0 0 ok 2010-May-06 00:43:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 00:43:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-06 00:43:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17032.00 2010-May-06 00:43:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 00:43:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 00:43:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 00:43:53 LOG5 end_task: Level: (4) ID = <10415> Status = 0 0 0 0 ok 2010-May-06 00:43:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 00:43:53 LOG5 end_task: Level: (3) ID = <10414> Status = 0 0 0 0 ok 2010-May-06 00:43:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-06 00:43:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-06 00:43:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-06 00:43:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 00:43:53 LOG5 begin_task: Level: (3) ID = <10416> Status = 0 0 0 0 ok 2010-May-06 00:43:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 00:43:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-06 00:43:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 00:43:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 00:43:53 LOG5 end_task: Level: (3) ID = <10416> Status = 0 0 0 0 ok 2010-May-06 00:43:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-06 00:43:53 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-06 00:43:53 LOG5 finish_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2010-May-06 00:43:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-06 00:43:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 00:43:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-06 00:43:53 LOG5 end_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2010-May-06 00:43:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 35 of 99 2010-May-06 00:43:53 LOG4 send_obs_status: To obs_status: <1> LOOP 35 2010-May-06 00:43:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-06 00:43:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-06 00:43:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-06 00:43:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-06 00:43:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-06 00:43:54 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-06 00:43:54 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 00:43:54 LOG5 begin_task: Level: (2) ID = <10417> Status = 0 0 0 0 ok 2010-May-06 00:43:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-06 00:43:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 00:43:54 INFO2 take_data: Starting WAPP 600-second scan: 12600010 2010-May-06 00:43:54 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 00:43:54 LOG5 begin_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2010-May-06 00:43:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-06 00:43:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 00:43:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-06 00:43:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17035.00 2010-May-06 00:43:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20100506.a2010.0004.fits 2010-May-06 00:43:54 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100506.a2010.0004.fits} 2010-May-06 00:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 00:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:53:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 00:53:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 00:53:55 LOG5 end_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2010-May-06 00:53:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 00:53:55 LOG5 end_task: Level: (2) ID = <10417> Status = 0 0 0 0 ok 2010-May-06 00:53:55 LOG1 fixed_driftmap: New position: year = 2010.3450717101427 RA = 15:22:13.2 RA/Dec = 15:22:42.0 +26:47:16.1 2010-May-06 00:53:55 NOTE fixed_driftmap: Correcting ZA to 8:26:02.4 ... 2010-May-06 00:53:55 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4340046242 -CF 2010-May-06 00:53:55 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-06 00:53:55 START begin_task: Starting task 'WAPP calibration' 2010-May-06 00:53:55 LOG5 begin_task: Level: (2) ID = <10419> Status = 0 0 0 0 ok 2010-May-06 00:53:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-06 00:53:55 START begin_task: Starting task 'selecting calibration type' 2010-May-06 00:53:55 LOG5 begin_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2010-May-06 00:53:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-06 00:53:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-06 00:53:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-06 00:53:55 START begin_task: Starting task 'waiting on setcal' 2010-May-06 00:53:55 LOG5 begin_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2010-May-06 00:53:55 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4340046242 -CF 2010-May-06 00:53:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:53:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-06 00:53:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-06 00:53:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:53:55 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-06 00:53:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-06 00:53:55 LOG5 end_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2010-May-06 00:53:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-06 00:53:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 00:53:55 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-06 00:53:55 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 00:53:55 LOG5 begin_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2010-May-06 00:53:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 00:53:56 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 00:53:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 00:53:56 LOG5 end_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2010-May-06 00:53:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 00:53:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-06 00:53:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 00:53:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-06 00:53:56 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 00:53:56 LOG5 begin_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2010-May-06 00:53:56 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 00:53:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 00:53:56 LOG5 end_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2010-May-06 00:53:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 00:53:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-06 00:53:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-06 00:53:56 LOG5 end_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2010-May-06 00:53:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-06 00:53:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-06 00:53:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-06 00:53:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 00:53:56 LOG5 begin_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2010-May-06 00:53:56 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 00:53:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-06 00:53:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 00:53:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 00:53:56 LOG5 end_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2010-May-06 00:53:56 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-06 00:53:56 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 00:53:56 LOG5 begin_task: Level: (3) ID = <10425> Status = 0 0 0 0 ok 2010-May-06 00:53:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-06 00:53:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 00:53:56 INFO2 take_data: Starting WAPP 1-second scan: 12600011 2010-May-06 00:53:56 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 00:53:56 LOG5 begin_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2010-May-06 00:53:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 00:53:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-06 00:53:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17637.00 2010-May-06 00:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 00:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:53:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 00:53:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 00:53:58 LOG5 end_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2010-May-06 00:53:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 00:53:58 LOG5 end_task: Level: (3) ID = <10425> Status = 0 0 0 0 ok 2010-May-06 00:53:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-06 00:53:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-06 00:53:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-06 00:53:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 00:53:58 LOG5 begin_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2010-May-06 00:53:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 00:53:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-06 00:53:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 00:53:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 00:53:58 LOG5 end_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2010-May-06 00:53:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-06 00:53:58 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-06 00:53:58 LOG5 finish_task: Level: (2) ID = <10419> Status = 0 0 0 0 ok 2010-May-06 00:53:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-06 00:53:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 00:53:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-06 00:53:58 LOG5 end_task: Level: (2) ID = <10419> Status = 0 0 0 0 ok 2010-May-06 00:53:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 36 of 99 2010-May-06 00:53:58 LOG4 send_obs_status: To obs_status: <1> LOOP 36 2010-May-06 00:53:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-06 00:53:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-06 00:53:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-06 00:53:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-06 00:53:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-06 00:53:59 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-06 00:53:59 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 00:53:59 LOG5 begin_task: Level: (2) ID = <10428> Status = 0 0 0 0 ok 2010-May-06 00:53:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-06 00:53:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 00:53:59 INFO2 take_data: Starting WAPP 600-second scan: 12600012 2010-May-06 00:53:59 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 00:53:59 LOG5 begin_task: Level: (3) ID = <10429> Status = 0 0 0 0 ok 2010-May-06 00:53:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-06 00:53:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 00:53:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-06 00:53:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17640.00 2010-May-06 00:53:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20100506.a2010.0005.fits 2010-May-06 00:53:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100506.a2010.0005.fits} 2010-May-06 00:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 00:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 00:54:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:04:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 01:04:00 LOG5 end_task: Level: (3) ID = <10429> Status = 0 0 0 0 ok 2010-May-06 01:04:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 01:04:00 LOG5 end_task: Level: (2) ID = <10428> Status = 0 0 0 0 ok 2010-May-06 01:04:00 LOG1 fixed_driftmap: New position: year = 2010.3450908814359 RA = 15:32:20.1 RA/Dec = 15:32:48.6 +26:47:23.1 2010-May-06 01:04:00 NOTE fixed_driftmap: Correcting ZA to 8:26:09.4 ... 2010-May-06 01:04:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4359374447 -CF 2010-May-06 01:04:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-06 01:04:00 START begin_task: Starting task 'WAPP calibration' 2010-May-06 01:04:00 LOG5 begin_task: Level: (2) ID = <10430> Status = 0 0 0 0 ok 2010-May-06 01:04:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-06 01:04:00 START begin_task: Starting task 'selecting calibration type' 2010-May-06 01:04:00 LOG5 begin_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2010-May-06 01:04:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-06 01:04:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-06 01:04:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-06 01:04:00 START begin_task: Starting task 'waiting on setcal' 2010-May-06 01:04:00 LOG5 begin_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2010-May-06 01:04:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4359374447 -CF 2010-May-06 01:04:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:04:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-06 01:04:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-06 01:04:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:04:00 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-06 01:04:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-06 01:04:00 LOG5 end_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2010-May-06 01:04:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-06 01:04:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 01:04:00 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-06 01:04:00 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 01:04:00 LOG5 begin_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2010-May-06 01:04:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:04:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 01:04:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 01:04:01 LOG5 end_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2010-May-06 01:04:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 01:04:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-06 01:04:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 01:04:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-06 01:04:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 01:04:01 LOG5 begin_task: Level: (4) ID = <10434> Status = 0 0 0 0 ok 2010-May-06 01:04:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 01:04:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 01:04:01 LOG5 end_task: Level: (4) ID = <10434> Status = 0 0 0 0 ok 2010-May-06 01:04:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 01:04:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-06 01:04:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-06 01:04:01 LOG5 end_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2010-May-06 01:04:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-06 01:04:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-06 01:04:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-06 01:04:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 01:04:01 LOG5 begin_task: Level: (3) ID = <10435> Status = 0 0 0 0 ok 2010-May-06 01:04:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 01:04:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-06 01:04:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 01:04:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 01:04:01 LOG5 end_task: Level: (3) ID = <10435> Status = 0 0 0 0 ok 2010-May-06 01:04:01 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-06 01:04:01 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 01:04:01 LOG5 begin_task: Level: (3) ID = <10436> Status = 0 0 0 0 ok 2010-May-06 01:04:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-06 01:04:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 01:04:01 INFO2 take_data: Starting WAPP 1-second scan: 12600013 2010-May-06 01:04:01 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 01:04:01 LOG5 begin_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2010-May-06 01:04:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:04:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-06 01:04:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18242.00 2010-May-06 01:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:04:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 01:04:03 LOG5 end_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2010-May-06 01:04:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 01:04:03 LOG5 end_task: Level: (3) ID = <10436> Status = 0 0 0 0 ok 2010-May-06 01:04:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-06 01:04:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-06 01:04:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-06 01:04:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 01:04:03 LOG5 begin_task: Level: (3) ID = <10438> Status = 0 0 0 0 ok 2010-May-06 01:04:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 01:04:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-06 01:04:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 01:04:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 01:04:03 LOG5 end_task: Level: (3) ID = <10438> Status = 0 0 0 0 ok 2010-May-06 01:04:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-06 01:04:04 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-06 01:04:04 LOG5 finish_task: Level: (2) ID = <10430> Status = 0 0 0 0 ok 2010-May-06 01:04:04 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-06 01:04:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 01:04:04 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-06 01:04:04 LOG5 end_task: Level: (2) ID = <10430> Status = 0 0 0 0 ok 2010-May-06 01:04:04 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 37 of 99 2010-May-06 01:04:04 LOG4 send_obs_status: To obs_status: <1> LOOP 37 2010-May-06 01:04:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-06 01:04:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-06 01:04:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-06 01:04:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-06 01:04:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-06 01:04:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-06 01:04:04 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 01:04:04 LOG5 begin_task: Level: (2) ID = <10439> Status = 0 0 0 0 ok 2010-May-06 01:04:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-06 01:04:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 01:04:04 INFO2 take_data: Starting WAPP 600-second scan: 12600014 2010-May-06 01:04:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 01:04:04 LOG5 begin_task: Level: (3) ID = <10440> Status = 0 0 0 0 ok 2010-May-06 01:04:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-06 01:04:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:04:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-06 01:04:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18245.00 2010-May-06 01:04:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20100506.a2010.0006.fits 2010-May-06 01:04:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100506.a2010.0006.fits} 2010-May-06 01:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:14:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 01:14:05 LOG5 end_task: Level: (3) ID = <10440> Status = 0 0 0 0 ok 2010-May-06 01:14:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 01:14:05 LOG5 end_task: Level: (2) ID = <10439> Status = 0 0 0 0 ok 2010-May-06 01:14:05 LOG1 fixed_driftmap: New position: year = 2010.3451100527291 RA = 15:42:27.0 RA/Dec = 15:42:55.3 +26:47:30.3 2010-May-06 01:14:05 NOTE fixed_driftmap: Correcting ZA to 8:26:16.6 ... 2010-May-06 01:14:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 8.4379409874 -CF 2010-May-06 01:14:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-06 01:14:05 START begin_task: Starting task 'WAPP calibration' 2010-May-06 01:14:05 LOG5 begin_task: Level: (2) ID = <10441> Status = 0 0 0 0 ok 2010-May-06 01:14:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-06 01:14:05 START begin_task: Starting task 'selecting calibration type' 2010-May-06 01:14:05 LOG5 begin_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2010-May-06 01:14:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-06 01:14:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-06 01:14:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-06 01:14:05 START begin_task: Starting task 'waiting on setcal' 2010-May-06 01:14:05 LOG5 begin_task: Level: (4) ID = <10443> Status = 0 0 0 0 ok 2010-May-06 01:14:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 8.4379409874 -CF 2010-May-06 01:14:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:14:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-06 01:14:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-06 01:14:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:14:06 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-06 01:14:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-06 01:14:06 LOG5 end_task: Level: (4) ID = <10443> Status = 0 0 0 0 ok 2010-May-06 01:14:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-06 01:14:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 01:14:06 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-06 01:14:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 01:14:06 LOG5 begin_task: Level: (4) ID = <10444> Status = 0 0 0 0 ok 2010-May-06 01:14:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:14:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 01:14:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 01:14:06 LOG5 end_task: Level: (4) ID = <10444> Status = 0 0 0 0 ok 2010-May-06 01:14:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 01:14:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-06 01:14:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 01:14:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-06 01:14:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 01:14:06 LOG5 begin_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2010-May-06 01:14:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 01:14:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 01:14:06 LOG5 end_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2010-May-06 01:14:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 01:14:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-06 01:14:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-06 01:14:06 LOG5 end_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2010-May-06 01:14:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-06 01:14:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-06 01:14:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-06 01:14:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 01:14:06 LOG5 begin_task: Level: (3) ID = <10446> Status = 0 0 0 0 ok 2010-May-06 01:14:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 01:14:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-06 01:14:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 01:14:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 01:14:06 LOG5 end_task: Level: (3) ID = <10446> Status = 0 0 0 0 ok 2010-May-06 01:14:06 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-06 01:14:06 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 01:14:06 LOG5 begin_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2010-May-06 01:14:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-06 01:14:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 01:14:06 INFO2 take_data: Starting WAPP 1-second scan: 12600015 2010-May-06 01:14:07 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 01:14:07 LOG5 begin_task: Level: (4) ID = <10448> Status = 0 0 0 0 ok 2010-May-06 01:14:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:14:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-06 01:14:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18848.00 2010-May-06 01:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:14:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-06 01:14:09 LOG5 end_task: Level: (4) ID = <10448> Status = 0 0 0 0 ok 2010-May-06 01:14:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-06 01:14:09 LOG5 end_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2010-May-06 01:14:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-06 01:14:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-06 01:14:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-06 01:14:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 01:14:09 LOG5 begin_task: Level: (3) ID = <10449> Status = 0 0 0 0 ok 2010-May-06 01:14:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 01:14:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-06 01:14:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 01:14:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 01:14:09 LOG5 end_task: Level: (3) ID = <10449> Status = 0 0 0 0 ok 2010-May-06 01:14:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-06 01:14:09 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-06 01:14:09 LOG5 finish_task: Level: (2) ID = <10441> Status = 0 0 0 0 ok 2010-May-06 01:14:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-06 01:14:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 01:14:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-06 01:14:09 LOG5 end_task: Level: (2) ID = <10441> Status = 0 0 0 0 ok 2010-May-06 01:14:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 38 of 99 2010-May-06 01:14:09 LOG4 send_obs_status: To obs_status: <1> LOOP 38 2010-May-06 01:14:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-06 01:14:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-06 01:14:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-06 01:14:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-06 01:14:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-06 01:14:10 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-06 01:14:10 START begin_task: Starting task 'WAPP spectral observation' 2010-May-06 01:14:10 LOG5 begin_task: Level: (2) ID = <10450> Status = 0 0 0 0 ok 2010-May-06 01:14:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-06 01:14:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-06 01:14:10 INFO2 take_data: Starting WAPP 600-second scan: 12600016 2010-May-06 01:14:10 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-06 01:14:10 LOG5 begin_task: Level: (3) ID = <10451> Status = 0 0 0 0 ok 2010-May-06 01:14:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-06 01:14:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:14:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-06 01:14:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18851.00 2010-May-06 01:14:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20100506.a2010.0007.fits 2010-May-06 01:14:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100506.a2010.0007.fits} 2010-May-06 01:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:14:17 COMMAND CIMA-send_to_exec: Sending command to abort observation 2010-May-06 01:14:17 LOG4 exec_msg: From OBSERVER: abort_task abort 2010-May-06 01:14:17 WARNING abort_task: WARNING abort requested! 2010-May-06 01:14:17 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2010-May-06 01:14:17 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2010-May-06 01:14:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2010-May-06 01:14:17 LOG5 end_task: Level: (3) ID = <10451> Status = 1 0 0 0 abort 2010-May-06 01:14:17 LOG4 stop_backends: Calling 'stop_backends' 2010-May-06 01:14:17 START begin_task: Starting task 'stopping the WAPPs' 2010-May-06 01:14:17 LOG5 begin_task: Level: (3) ID = <10452> Status = 1 0 0 0 abort 2010-May-06 01:14:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2010-May-06 01:14:17 INFO1 stop_wapp: Stopping the WAPPs 2010-May-06 01:14:17 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2010-May-06 01:14:17 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2010-May-06 01:14:17 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2010-May-06 01:14:17 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2010-May-06 01:14:17 START begin_task: Starting task 'waiting on stopping WAPPs' 2010-May-06 01:14:17 LOG5 begin_task: Level: (4) ID = <10453> Status = 1 0 0 0 abort 2010-May-06 01:14:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2010-May-06 01:14:18 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2010-May-06 01:14:18 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2010-May-06 01:14:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:14:18 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2010-May-06 01:14:18 LOG5 end_task: Level: (4) ID = <10453> Status = 1 0 0 0 abort 2010-May-06 01:14:18 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2010-May-06 01:14:18 LOG5 end_task: Level: (3) ID = <10452> Status = 1 0 0 0 abort 2010-May-06 01:14:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2010-May-06 01:14:18 LOG5 end_task: Level: (2) ID = <10450> Status = 1 0 0 0 abort 2010-May-06 01:14:18 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-06 01:14:18 LOG5 finish_task: Level: (1) ID = <10027> Status = 1 0 0 0 abort 2010-May-06 01:14:18 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2010-May-06 01:14:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-06 01:14:19 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2010-May-06 01:14:19 LOG5 end_task: Level: (1) ID = <10027> Status = 1 0 0 0 abort 2010-May-06 01:14:23 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-May-06 01:14:23 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-May-06 01:14:23 LOG5 restart_wapp: Calling 'restart_wapp' 2010-May-06 01:14:23 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-May-06 01:14:23 LOG5 begin_task: Level: (1) ID = <10454> Status = 0 0 0 0 ok 2010-May-06 01:14:23 NOTE restart_wapp: Restarting all WAPPs 2010-May-06 01:14:23 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-May-06 01:14:23 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-May-06 01:14:23 LOG5 end_task: Level: (1) ID = <10454> Status = 0 0 0 0 ok 2010-May-06 01:14:23 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-06 01:14:23 LOG3 exec_msg: Closing socket 2010-May-06 01:14:23 LOG3 exec_msg: Closing socket 2010-May-06 01:14:23 LOG3 exec_msg: Closing socket 2010-May-06 01:14:23 LOG3 exec_msg: Closing socket 2010-May-06 01:14:26 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-May-06 01:14:26 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-May-06 01:14:26 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-May-06 01:14:26 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-May-06 01:14:36 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc_mar10.cmd' 2010-May-06 01:14:41 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc_mar10.cmd' to executive ... 2010-May-06 01:14:41 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_10.conf} 2010-May-06 01:14:41 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {CATALOG galfa_togs.cat} 2010-May-06 01:14:41 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {SEEK galfasrc} 2010-May-06 01:14:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 10 {TRACKCURPOS} 2010-May-06 01:14:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 11 {ALFAANGLE 19.} 2010-May-06 01:14:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {WAITTRACK} 2010-May-06 01:14:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2010-May-06 01:14:42 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-06 01:14:42 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc_mar10.cmd 1 1 7 2010-May-06 01:14:42 LOG4 run_command_file: Calling 'run_command_file command_galfasrc_mar10.cmd 1 1 7' 2010-May-06 01:14:42 BEGIN begin_task: Starting task 'running command file 'command_galfasrc_mar10.cmd'' 2010-May-06 01:14:42 LOG5 begin_task: Level: (1) ID = <10455> Status = 0 0 0 0 ok 2010-May-06 01:14:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc_mar10.cmd' ...} 2010-May-06 01:14:42 NOTE run_command_file: Starting execution of command file 'command_galfasrc_mar10.cmd' from line 1 2010-May-06 01:14:42 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_10.conf' 2010-May-06 01:14:42 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-06 01:14:42 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-06 01:14:42 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-May-06 01:14:42 NOTE CIMA-load_config_file: Loading configuration file 'togs_10.conf' 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-06 01:14:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-06 01:14:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-06 01:14:44 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-06 01:14:44 LOG5 begin_task: Level: (2) ID = <10456> Status = 0 0 0 0 ok 2010-May-06 01:14:44 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-06 01:14:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-06 01:14:44 LOG1 config_iflo: Receiver ALFA already selected 2010-May-06 01:14:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 01:14:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-06 01:14:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 01:14:44 LOG5 begin_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2010-May-06 01:14:45 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 01:14:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 01:14:45 LOG5 end_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2010-May-06 01:14:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 01:14:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-06 01:14:45 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-May-06 01:14:45 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-06 01:14:45 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-May-06 01:14:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-May-06 01:14:45 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-06 01:14:45 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-06 01:14:45 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-06 01:14:45 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-06 01:14:45 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-May-06 01:14:45 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-May-06 01:14:45 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-06 01:14:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-May-06 01:14:45 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-May-06 01:14:45 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-May-06 01:14:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-06 01:14:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-06 01:14:45 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-06 01:14:45 LOG5 begin_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2010-May-06 01:14:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-06 01:14:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-May-06 01:14:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:14:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-06 01:14:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:14:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:14:45 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-May-06 01:14:45 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-06 01:14:45 LOG5 end_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2010-May-06 01:14:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-06 01:14:45 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-06 01:14:45 LOG5 finish_task: Level: (2) ID = <10456> Status = 0 0 0 0 ok 2010-May-06 01:14:45 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-06 01:14:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-06 01:14:45 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-06 01:14:45 LOG5 end_task: Level: (2) ID = <10456> Status = 0 0 0 0 ok 2010-May-06 01:14:45 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-06 01:14:45 LOG5 begin_task: Level: (2) ID = <10459> Status = 0 0 0 0 ok 2010-May-06 01:14:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-06 01:14:45 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-06 01:14:45 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-06 01:14:45 START begin_task: Starting task 'selecting calibration port' 2010-May-06 01:14:45 LOG5 begin_task: Level: (3) ID = <10460> Status = 0 0 0 0 ok 2010-May-06 01:14:45 LOG3 vw_send: To DATATAKING: calport 3 2010-May-06 01:14:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-06 01:14:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-06 01:14:45 START begin_task: Starting task 'waiting on calport' 2010-May-06 01:14:45 LOG5 begin_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2010-May-06 01:14:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:14:46 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-06 01:14:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-06 01:14:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:14:46 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-06 01:14:46 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-06 01:14:46 LOG5 end_task: Level: (4) ID = <10461> Status = 0 0 0 0 ok 2010-May-06 01:14:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-06 01:14:46 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-06 01:14:46 LOG5 end_task: Level: (3) ID = <10460> Status = 0 0 0 0 ok 2010-May-06 01:14:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-06 01:14:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-06 01:14:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 01:14:46 LOG5 begin_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2010-May-06 01:14:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:14:46 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 01:14:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-06 01:14:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 01:14:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 01:14:46 LOG5 end_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2010-May-06 01:14:46 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-06 01:14:46 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-06 01:14:46 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-06 01:14:46 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-06 01:14:46 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-06 01:14:46 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-06 01:14:46 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-06 01:14:46 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-06 01:14:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-06 01:14:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-06 01:14:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-06 01:14:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-06 01:14:46 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-06 01:14:46 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-06 01:14:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 01:14:46 LOG5 begin_task: Level: (3) ID = <10463> Status = 0 0 0 0 ok 2010-May-06 01:14:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-06 01:14:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-06 01:14:46 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 01:14:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-06 01:14:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-06 01:14:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 01:14:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 01:14:46 LOG5 end_task: Level: (3) ID = <10463> Status = 0 0 0 0 ok 2010-May-06 01:14:46 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-May-06 01:14:46 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-06 01:14:46 LOG5 finish_task: Level: (2) ID = <10459> Status = 0 0 0 0 ok 2010-May-06 01:14:46 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-06 01:14:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-06 01:14:46 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-06 01:14:46 LOG5 end_task: Level: (2) ID = <10459> Status = 0 0 0 0 ok 2010-May-06 01:14:46 COMMAND run_command_line: EXECUTING command 8: 'CATALOG galfa_togs.cat' 2010-May-06 01:14:46 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/galfa_togs.cat' 2010-May-06 01:14:47 COMMAND run_command_line: EXECUTING command 9: 'SEEK galfasrc' 2010-May-06 01:14:47 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/galfa_togs.cat galfasrc nooffset wait' 2010-May-06 01:14:47 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-May-06 01:14:47 LOG5 begin_task: Level: (2) ID = <10464> Status = 0 0 0 0 ok 2010-May-06 01:14:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-May-06 01:14:47 LOG3 track_source: Calling 'track_source galfasrc 180.0 8.48 F 0.0 0.0 main small /share/obs4/usr/a2010/galfa_togs.cat 0 Topocentric velocity(optical)' 2010-May-06 01:14:47 START begin_task: Starting task 'sending tracking commands' 2010-May-06 01:14:47 LOG5 begin_task: Level: (3) ID = <10465> Status = 0 0 0 0 ok 2010-May-06 01:14:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-May-06 01:14:47 INFO1 track_source: Starting to track galfasrc 2010-May-06 01:14:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-May-06 01:14:47 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-May-06 01:14:47 LOG3 vw_send: To DATATAKING: set dec 8.48 2010-May-06 01:14:47 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-06 01:14:47 LOG3 vw_send: To DATATAKING: pnt tr 180.0 8.48 -CF 2010-May-06 01:14:47 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-May-06 01:14:47 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-06 01:14:47 LOG5 finish_task: Level: (3) ID = <10465> Status = 0 0 0 0 ok 2010-May-06 01:14:47 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-06 01:14:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 01:14:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-06 01:14:47 LOG5 end_task: Level: (3) ID = <10465> Status = 0 0 0 0 ok 2010-May-06 01:14:47 START begin_task: Starting task 'waiting on telescope' 2010-May-06 01:14:47 LOG5 begin_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2010-May-06 01:14:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-06 01:14:47 LOG3 waittrk: Start waittrk 5 2010-May-06 01:14:47 START begin_task: Starting task 'waiting on telescope movement' 2010-May-06 01:14:47 LOG5 begin_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2010-May-06 01:14:47 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-06 01:14:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-May-06 01:14:47 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-May-06 01:14:47 LOG4 got_cormsg: From DATATAKING: set dec 8.48 2010-May-06 01:14:47 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-May-06 01:14:47 LOG4 got_cormsg: From DATATAKING: vw% 8.48 2010-May-06 01:14:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:14:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-06 01:14:47 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 8.48 -CF 2010-May-06 01:14:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-May-06 01:14:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-06 01:14:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:14:52 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-06 01:14:52 LOG5 end_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2010-May-06 01:14:52 START begin_task: Starting task 'waiting on telescope on source' 2010-May-06 01:14:52 LOG5 begin_task: Level: (4) ID = <10468> Status = 0 0 0 0 ok 2010-May-06 01:14:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-06 01:14:55 LOG5 end_task: Level: (4) ID = <10468> Status = 0 0 0 0 ok 2010-May-06 01:14:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-06 01:14:55 INFO2 waittrk: Now tracking galfasrc 2010-May-06 01:14:55 LOG4 waittrk: Current telescope position: Az = 179.74 ZA = 8.50 2010-May-06 01:14:55 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-06 01:14:55 LOG5 finish_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2010-May-06 01:14:55 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-06 01:14:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 01:14:55 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-06 01:14:55 LOG5 end_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2010-May-06 01:14:55 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-May-06 01:14:55 LOG5 finish_task: Level: (2) ID = <10464> Status = 0 0 0 0 ok 2010-May-06 01:14:55 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-May-06 01:14:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-06 01:14:55 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-May-06 01:14:55 LOG5 end_task: Level: (2) ID = <10464> Status = 0 0 0 0 ok 2010-May-06 01:14:55 COMMAND run_command_line: EXECUTING command 10: 'TRACKCURPOS' 2010-May-06 01:14:55 BEGIN begin_task: Starting task 'tracking current position' 2010-May-06 01:14:55 LOG5 begin_task: Level: (2) ID = <10469> Status = 0 0 0 0 ok 2010-May-06 01:14:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2010-May-06 01:14:55 INFO1 track_current_pos: Starting to track the current commanded position RA = 15:43:17.1 and Dec = +26:52:09.5 2010-May-06 01:14:55 LOG3 track_source: Calling 'track_source Cur-pos 154317.1 265209.5 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-May-06 01:14:55 START begin_task: Starting task 'sending tracking commands' 2010-May-06 01:14:55 LOG5 begin_task: Level: (3) ID = <10470> Status = 0 0 0 0 ok 2010-May-06 01:14:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2010-May-06 01:14:56 INFO1 track_source: Starting to track Cur-pos 2010-May-06 01:14:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2010-May-06 01:14:56 LOG3 vw_send: To DATATAKING: set ra 154317.1 2010-May-06 01:14:56 LOG3 vw_send: To DATATAKING: set dec 265209.5 2010-May-06 01:14:56 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-06 01:14:56 LOG3 vw_send: To DATATAKING: pnt tr 154317.1 265209.5 -CJ 2010-May-06 01:14:56 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-May-06 01:14:56 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-06 01:14:56 LOG5 finish_task: Level: (3) ID = <10470> Status = 0 0 0 0 ok 2010-May-06 01:14:56 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-06 01:14:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 01:14:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-06 01:14:56 LOG5 end_task: Level: (3) ID = <10470> Status = 0 0 0 0 ok 2010-May-06 01:14:56 START begin_task: Starting task 'waiting on telescope' 2010-May-06 01:14:56 LOG5 begin_task: Level: (3) ID = <10471> Status = 0 0 0 0 ok 2010-May-06 01:14:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-06 01:14:56 LOG3 waittrk: Start waittrk 5 2010-May-06 01:14:56 START begin_task: Starting task 'waiting on telescope movement' 2010-May-06 01:14:56 LOG5 begin_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2010-May-06 01:14:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2010-May-06 01:14:56 LOG4 got_cormsg: From DATATAKING: set ra 154317.1 2010-May-06 01:14:56 LOG4 got_cormsg: From DATATAKING: set dec 265209.5 2010-May-06 01:14:56 LOG4 got_cormsg: From DATATAKING: vw% 154317.1 2010-May-06 01:14:56 LOG4 got_cormsg: From DATATAKING: vw% 265209.5 2010-May-06 01:14:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:14:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-06 01:14:56 LOG4 got_cormsg: From DATATAKING: pnt tr 154317.1 265209.5 -CJ 2010-May-06 01:14:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-May-06 01:14:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-06 01:14:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:15:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-06 01:15:01 LOG5 end_task: Level: (4) ID = <10472> Status = 0 0 0 0 ok 2010-May-06 01:15:01 START begin_task: Starting task 'waiting on telescope on source' 2010-May-06 01:15:01 LOG5 begin_task: Level: (4) ID = <10473> Status = 0 0 0 0 ok 2010-May-06 01:15:03 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-06 01:15:03 LOG5 end_task: Level: (4) ID = <10473> Status = 0 0 0 0 ok 2010-May-06 01:15:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-06 01:15:03 INFO2 waittrk: Now tracking Cur-pos 2010-May-06 01:15:03 LOG4 waittrk: Current telescope position: Az = 179.54 ZA = 8.50 2010-May-06 01:15:03 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-06 01:15:03 LOG5 finish_task: Level: (3) ID = <10471> Status = 0 0 0 0 ok 2010-May-06 01:15:03 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-06 01:15:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 01:15:03 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-06 01:15:03 LOG5 end_task: Level: (3) ID = <10471> Status = 0 0 0 0 ok 2010-May-06 01:15:03 STOP finish_task: Finishing task 'tracking current position' 2010-May-06 01:15:03 LOG5 finish_task: Level: (2) ID = <10469> Status = 0 0 0 0 ok 2010-May-06 01:15:03 DONE finish_task: DONE finished tracking: current position 2010-May-06 01:15:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-06 01:15:03 END end_task: Finishing task 'tracking current position' with status 'OK' 2010-May-06 01:15:03 LOG5 end_task: Level: (2) ID = <10469> Status = 0 0 0 0 ok 2010-May-06 01:15:03 COMMAND run_command_line: EXECUTING command 11: 'ALFAANGLE 19.' 2010-May-06 01:15:03 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19. 2010-May-06 01:15:03 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-May-06 01:15:03 LOG5 begin_task: Level: (2) ID = <10474> Status = 0 0 0 0 ok 2010-May-06 01:15:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-May-06 01:15:03 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-May-06 01:15:03 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19. REPLY 2010-May-06 01:15:03 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-06 01:15:03 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-06 01:15:03 LOG5 begin_task: Level: (3) ID = <10475> Status = 0 0 0 0 ok 2010-May-06 01:15:04 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-06 01:15:04 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-May-06 01:15:04 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-06 01:15:04 LOG5 end_task: Level: (3) ID = <10475> Status = 0 0 0 0 ok 2010-May-06 01:15:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-06 01:15:04 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-May-06 01:15:04 LOG5 finish_task: Level: (2) ID = <10474> Status = 0 0 0 0 ok 2010-May-06 01:15:04 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-May-06 01:15:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-06 01:15:04 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-May-06 01:15:04 LOG5 end_task: Level: (2) ID = <10474> Status = 0 0 0 0 ok 2010-May-06 01:15:04 COMMAND run_command_line: EXECUTING command 12: 'WAITTRACK' 2010-May-06 01:15:04 BEGIN begin_task: Starting task 'waiting on telescope' 2010-May-06 01:15:04 LOG5 begin_task: Level: (2) ID = <10476> Status = 0 0 0 0 ok 2010-May-06 01:15:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-06 01:15:04 LOG3 waittrk: Start waittrk 5 2010-May-06 01:15:04 START begin_task: Starting task 'waiting on telescope movement' 2010-May-06 01:15:04 LOG5 begin_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2010-May-06 01:15:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-06 01:15:09 LOG5 end_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2010-May-06 01:15:09 START begin_task: Starting task 'waiting on telescope on source' 2010-May-06 01:15:09 LOG5 begin_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2010-May-06 01:15:10 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-06 01:15:10 LOG5 end_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2010-May-06 01:15:10 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-06 01:15:10 INFO2 waittrk: Now tracking Cur-pos 2010-May-06 01:15:10 LOG4 waittrk: Current telescope position: Az = 179.39 ZA = 8.50 2010-May-06 01:15:10 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-06 01:15:10 LOG5 finish_task: Level: (2) ID = <10476> Status = 0 0 0 0 ok 2010-May-06 01:15:10 DONE finish_task: DONE finished waiting: telescope on source 2010-May-06 01:15:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-06 01:15:10 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-06 01:15:10 LOG5 end_task: Level: (2) ID = <10476> Status = 0 0 0 0 ok 2010-May-06 01:15:10 COMMAND run_command_line: EXECUTING command 16: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-May-06 01:15:10 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-May-06 01:15:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-06 01:15:10 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-May-06 01:15:10 BEGIN begin_task: Starting task 'smart frequency switching' 2010-May-06 01:15:10 LOG5 begin_task: Level: (2) ID = <10479> Status = 0 0 0 0 ok 2010-May-06 01:15:10 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2010-May-06 01:15:10 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-May-06 01:15:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-May-06 01:15:10 START begin_task: Starting task 'selecting calibration type' 2010-May-06 01:15:10 LOG5 begin_task: Level: (3) ID = <10480> Status = 0 0 0 0 ok 2010-May-06 01:15:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-06 01:15:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-06 01:15:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-06 01:15:10 START begin_task: Starting task 'waiting on setcal' 2010-May-06 01:15:10 LOG5 begin_task: Level: (4) ID = <10481> Status = 0 0 0 0 ok 2010-May-06 01:15:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-06 01:15:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-06 01:15:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:15:11 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-06 01:15:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-06 01:15:11 LOG5 end_task: Level: (4) ID = <10481> Status = 0 0 0 0 ok 2010-May-06 01:15:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-06 01:15:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 01:15:11 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-06 01:15:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 01:15:11 LOG5 begin_task: Level: (4) ID = <10482> Status = 0 0 0 0 ok 2010-May-06 01:15:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 01:15:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 01:15:11 LOG5 end_task: Level: (4) ID = <10482> Status = 0 0 0 0 ok 2010-May-06 01:15:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 01:15:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-06 01:15:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-06 01:15:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-06 01:15:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-06 01:15:11 LOG5 begin_task: Level: (4) ID = <10483> Status = 0 0 0 0 ok 2010-May-06 01:15:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:15:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-06 01:15:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-06 01:15:11 LOG5 end_task: Level: (4) ID = <10483> Status = 0 0 0 0 ok 2010-May-06 01:15:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-06 01:15:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-06 01:15:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-06 01:15:11 LOG5 end_task: Level: (3) ID = <10480> Status = 0 0 0 0 ok 2010-May-06 01:15:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2010-May-06 01:15:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2010-May-06 01:15:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2010-May-06 01:15:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2010-May-06 01:15:11 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-May-06 01:15:11 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-06 01:15:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-May-06 01:15:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-06 01:15:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-06 01:15:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 01:15:11 LOG5 begin_task: Level: (3) ID = <10484> Status = 0 0 0 0 ok 2010-May-06 01:15:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2010-May-06 01:15:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 01:15:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-06 01:15:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 01:15:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 01:15:11 LOG5 end_task: Level: (3) ID = <10484> Status = 0 0 0 0 ok 2010-May-06 01:15:11 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-May-06 01:15:11 START begin_task: Starting task 'adjusting WAPP power' 2010-May-06 01:15:11 LOG5 begin_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2010-May-06 01:15:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-May-06 01:15:11 INFO2 adjust_power: Starting to adjust WAPP power 2010-May-06 01:15:11 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-06 01:15:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-06 01:15:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-06 01:15:11 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-06 01:15:11 LOG5 begin_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2010-May-06 01:15:11 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-06 01:15:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-06 01:15:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20100506.a2010.0008.fits 2010-May-06 01:15:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100506.a2010.0008.fits} 2010-May-06 01:15:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:15:14 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-06 01:15:14 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-06 01:15:14 LOG5 end_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2010-May-06 01:15:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-06 01:15:14 START begin_task: Starting task 'adjusting WAPP power' 2010-May-06 01:15:14 LOG5 begin_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2010-May-06 01:15:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-06 01:15:14 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-06 01:15:14 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-06 01:15:14 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-06 01:15:14 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-06 01:15:14 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-06 01:15:14 LOG5 begin_task: Level: (5) ID = <10488> Status = 0 0 0 0 ok 2010-May-06 01:15:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-06 01:15:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:15:15 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 7 dB 2010-May-06 01:15:15 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-06 01:15:15 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-06 01:15:15 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 1 dB 2010-May-06 01:15:15 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-06 01:15:15 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-06 01:15:15 LOG5 end_task: Level: (5) ID = <10488> Status = 0 0 0 0 ok 2010-May-06 01:15:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.924 1.048 ALFA beam 1: 1.067 0.898 2010-May-06 01:15:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.016 0.999 ALFA beam 3: 0.941 1.052 2010-May-06 01:15:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.941 0.950 ALFA beam 5: 0.969 1.059 2010-May-06 01:15:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.996 0.940 ALFA beam 7: 1.085 0.883 2010-May-06 01:15:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-06 01:15:15 LOG5 finish_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2010-May-06 01:15:15 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-06 01:15:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 01:15:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-06 01:15:15 LOG5 end_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2010-May-06 01:15:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-06 01:15:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-06 01:15:15 LOG5 finish_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2010-May-06 01:15:15 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-May-06 01:15:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-06 01:15:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-06 01:15:15 LOG5 end_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2010-May-06 01:15:15 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-May-06 01:15:15 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-May-06 01:15:15 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-May-06 01:15:15 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:15:15 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34511 J 2010-May-06 01:15:15 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:15:15 LOG2 antvel: Parameters to Doppler: Topocentric 18915 2010 126 0.0 2010-May-06 01:15:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:15:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-May-06 01:15:15 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-May-06 01:15:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:15:15 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:15:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-06 01:15:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:15:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-May-06 01:15:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:15:15 LOG5 begin_task: Level: (3) ID = <10489> Status = 0 0 0 0 ok 2010-May-06 01:15:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-May-06 01:15:15 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.734589 2010.3451122708952 18.999933 2010-May-06 01:15:15 LOG4 log_alfabeam: ALFABEAM 0 15.721416666667007 26.869305555555552 2010-May-06 01:15:15 LOG4 log_alfabeam: ALFABEAM 1 15.722773921942125 26.764739032438239 2010-May-06 01:15:15 LOG4 log_alfabeam: ALFABEAM 2 15.727870975631934 26.834892791583357 2010-May-06 01:15:15 LOG4 log_alfabeam: ALFABEAM 3 15.726570083536103 26.939613156019082 2010-May-06 01:15:15 LOG4 log_alfabeam: ALFABEAM 4 15.720024955150343 26.973829613673740 2010-May-06 01:15:15 LOG4 log_alfabeam: ALFABEAM 5 15.714906570129262 26.902771449339696 2010-May-06 01:15:15 LOG4 log_alfabeam: ALFABEAM 6 15.716354434388364 26.798410086127895 2010-May-06 01:15:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600017 2010-May-06 01:15:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:15:16 LOG5 begin_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2010-May-06 01:15:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:15:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-06 01:15:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:15:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:15:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:15:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-May-06 01:15:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18917.00 2010-May-06 01:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:15:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:15:27 LOG5 end_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2010-May-06 01:15:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:15:27 LOG5 end_task: Level: (3) ID = <10489> Status = 0 0 0 0 ok 2010-May-06 01:15:27 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-May-06 01:15:27 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-May-06 01:15:27 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-May-06 01:15:27 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:15:27 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34511 J 2010-May-06 01:15:27 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:15:27 LOG2 antvel: Parameters to Doppler: Topocentric 18927 2010 126 0.0 2010-May-06 01:15:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:15:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-May-06 01:15:27 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-May-06 01:15:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:15:27 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:15:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-06 01:15:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:15:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-May-06 01:15:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:15:27 LOG5 begin_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2010-May-06 01:15:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-May-06 01:15:27 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.737931 2010.3451126511522 18.999933 2010-May-06 01:15:27 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666800 26.869305555555552 2010-May-06 01:15:27 LOG4 log_alfabeam: ALFABEAM 1 15.722817846286459 26.764842905141141 2010-May-06 01:15:27 LOG4 log_alfabeam: ALFABEAM 2 15.727885360046738 26.835379448620962 2010-May-06 01:15:27 LOG4 log_alfabeam: ALFABEAM 3 15.726540415245484 26.940000170778809 2010-May-06 01:15:27 LOG4 log_alfabeam: ALFABEAM 4 15.719980971474126 26.973723146565337 2010-May-06 01:15:27 LOG4 log_alfabeam: ALFABEAM 5 15.714892608022016 26.902280667295280 2010-May-06 01:15:27 LOG4 log_alfabeam: ALFABEAM 6 15.716384322670082 26.798029984215216 2010-May-06 01:15:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600018 2010-May-06 01:15:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:15:28 LOG5 begin_task: Level: (4) ID = <10492> Status = 0 0 0 0 ok 2010-May-06 01:15:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:15:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-06 01:15:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:15:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:15:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:15:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-May-06 01:15:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18929.00 2010-May-06 01:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:15:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:15:39 LOG5 end_task: Level: (4) ID = <10492> Status = 0 0 0 0 ok 2010-May-06 01:15:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:15:39 LOG5 end_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2010-May-06 01:15:39 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-May-06 01:15:39 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-May-06 01:15:39 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-May-06 01:15:39 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:15:39 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34511 J 2010-May-06 01:15:39 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:15:39 LOG2 antvel: Parameters to Doppler: Topocentric 18939 2010 126 0.0 2010-May-06 01:15:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:15:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-May-06 01:15:39 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-May-06 01:15:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:15:39 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:15:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-06 01:15:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:15:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-May-06 01:15:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:15:39 LOG5 begin_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2010-May-06 01:15:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-May-06 01:15:39 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.741273 2010.3451130314093 18.999933 2010-May-06 01:15:39 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666693 26.869305555555552 2010-May-06 01:15:39 LOG4 log_alfabeam: ALFABEAM 1 15.722861719841566 26.764950067557333 2010-May-06 01:15:39 LOG4 log_alfabeam: ALFABEAM 2 15.727899538226584 26.835867116696100 2010-May-06 01:15:39 LOG4 log_alfabeam: ALFABEAM 3 15.726510587814829 26.940384891754874 2010-May-06 01:15:39 LOG4 log_alfabeam: ALFABEAM 4 15.719937040896381 26.973613387238764 2010-May-06 01:15:39 LOG4 log_alfabeam: ALFABEAM 5 15.714878855688172 26.901788933745785 2010-May-06 01:15:39 LOG4 log_alfabeam: ALFABEAM 6 15.716414363960046 26.797652207041025 2010-May-06 01:15:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600019 2010-May-06 01:15:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:15:40 LOG5 begin_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2010-May-06 01:15:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:15:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-06 01:15:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:15:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:15:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:15:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-May-06 01:15:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18941.00 2010-May-06 01:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:15:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:15:51 LOG5 end_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2010-May-06 01:15:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:15:51 LOG5 end_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2010-May-06 01:15:51 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-May-06 01:15:51 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-May-06 01:15:51 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-May-06 01:15:51 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:15:51 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34511 J 2010-May-06 01:15:51 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:15:51 LOG2 antvel: Parameters to Doppler: Topocentric 18951 2010 126 0.0 2010-May-06 01:15:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:15:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-May-06 01:15:51 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-May-06 01:15:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:15:51 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:15:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-06 01:15:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:15:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-May-06 01:15:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:15:51 LOG5 begin_task: Level: (3) ID = <10495> Status = 0 0 0 0 ok 2010-May-06 01:15:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-May-06 01:15:51 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.744616 2010.3451134116663 18.999933 2010-May-06 01:15:51 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666864 26.869305555555570 2010-May-06 01:15:51 LOG4 log_alfabeam: ALFABEAM 1 15.722905551831779 26.765060541930442 2010-May-06 01:15:51 LOG4 log_alfabeam: ALFABEAM 2 15.727913513157297 26.836355898310160 2010-May-06 01:15:51 LOG4 log_alfabeam: ALFABEAM 3 15.726480594986599 26.940767399709330 2010-May-06 01:15:51 LOG4 log_alfabeam: ALFABEAM 4 15.719893154185907 26.973500313140480 2010-May-06 01:15:51 LOG4 log_alfabeam: ALFABEAM 5 15.714865310193970 26.901296145696573 2010-May-06 01:15:51 LOG4 log_alfabeam: ALFABEAM 6 15.716444564540739 26.797276674668218 2010-May-06 01:15:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600020 2010-May-06 01:15:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:15:52 LOG5 begin_task: Level: (4) ID = <10496> Status = 0 0 0 0 ok 2010-May-06 01:15:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:15:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-06 01:15:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:15:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:15:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:15:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-May-06 01:15:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18953.00 2010-May-06 01:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:15:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:16:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:16:03 LOG5 end_task: Level: (4) ID = <10496> Status = 0 0 0 0 ok 2010-May-06 01:16:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:16:03 LOG5 end_task: Level: (3) ID = <10495> Status = 0 0 0 0 ok 2010-May-06 01:16:03 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-May-06 01:16:03 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-May-06 01:16:03 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-May-06 01:16:03 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:16:03 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34511 J 2010-May-06 01:16:03 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:16:03 LOG2 antvel: Parameters to Doppler: Topocentric 18963 2010 126 0.0 2010-May-06 01:16:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:16:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-May-06 01:16:03 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-May-06 01:16:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:16:03 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:16:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-06 01:16:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:16:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-May-06 01:16:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:16:03 LOG5 begin_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2010-May-06 01:16:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-May-06 01:16:03 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.747958 2010.3451137919233 18.999933 2010-May-06 01:16:03 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666764 26.869305555555552 2010-May-06 01:16:03 LOG4 log_alfabeam: ALFABEAM 1 15.722949312170615 26.765174250023691 2010-May-06 01:16:03 LOG4 log_alfabeam: ALFABEAM 2 15.727927275365019 26.836845456956699 2010-May-06 01:16:03 LOG4 log_alfabeam: ALFABEAM 3 15.726450457482640 26.941147433115638 2010-May-06 01:16:03 LOG4 log_alfabeam: ALFABEAM 4 15.719849341469468 26.973384004531280 2010-May-06 01:16:03 LOG4 log_alfabeam: ALFABEAM 5 15.714851980675329 26.900802642725360 2010-May-06 01:16:03 LOG4 log_alfabeam: ALFABEAM 6 15.716474903532806 26.796903643174499 2010-May-06 01:16:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600021 2010-May-06 01:16:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:16:04 LOG5 begin_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2010-May-06 01:16:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:16:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-06 01:16:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:16:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:16:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:16:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-May-06 01:16:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18965.00 2010-May-06 01:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:16:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:16:15 LOG5 end_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2010-May-06 01:16:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:16:15 LOG5 end_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2010-May-06 01:16:15 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-May-06 01:16:15 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-May-06 01:16:15 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-May-06 01:16:15 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:16:15 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34511 J 2010-May-06 01:16:15 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:16:15 LOG2 antvel: Parameters to Doppler: Topocentric 18975 2010 126 0.0 2010-May-06 01:16:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:16:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-May-06 01:16:15 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-May-06 01:16:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:16:15 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:16:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-06 01:16:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:16:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-May-06 01:16:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:16:15 LOG5 begin_task: Level: (3) ID = <10499> Status = 0 0 0 0 ok 2010-May-06 01:16:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-May-06 01:16:15 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.751301 2010.3451141721805 18.999933 2010-May-06 01:16:15 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666840 26.869305555555552 2010-May-06 01:16:15 LOG4 log_alfabeam: ALFABEAM 1 15.722993023200885 26.765291246893533 2010-May-06 01:16:15 LOG4 log_alfabeam: ALFABEAM 2 15.727940832030299 26.837336041300492 2010-May-06 01:16:15 LOG4 log_alfabeam: ALFABEAM 3 15.726420160085341 26.941525187348176 2010-May-06 01:16:15 LOG4 log_alfabeam: ALFABEAM 4 15.719805580381637 26.973264405267376 2010-May-06 01:16:15 LOG4 log_alfabeam: ALFABEAM 5 15.714838860131447 26.900308174459141 2010-May-06 01:16:15 LOG4 log_alfabeam: ALFABEAM 6 15.716505396245564 26.796532920091003 2010-May-06 01:16:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600022 2010-May-06 01:16:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:16:16 LOG5 begin_task: Level: (4) ID = <10500> Status = 0 0 0 0 ok 2010-May-06 01:16:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:16:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-06 01:16:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:16:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:16:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:16:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-May-06 01:16:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18977.00 2010-May-06 01:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:16:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:16:27 LOG5 end_task: Level: (4) ID = <10500> Status = 0 0 0 0 ok 2010-May-06 01:16:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:16:27 LOG5 end_task: Level: (3) ID = <10499> Status = 0 0 0 0 ok 2010-May-06 01:16:27 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-May-06 01:16:27 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-May-06 01:16:27 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-May-06 01:16:27 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:16:27 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34511 J 2010-May-06 01:16:27 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:16:27 LOG2 antvel: Parameters to Doppler: Topocentric 18987 2010 126 0.0 2010-May-06 01:16:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:16:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-May-06 01:16:27 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-May-06 01:16:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:16:27 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:16:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-06 01:16:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:16:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-May-06 01:16:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:16:27 LOG5 begin_task: Level: (3) ID = <10501> Status = 0 0 0 0 ok 2010-May-06 01:16:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-May-06 01:16:27 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.754643 2010.3451145524375 18.999933 2010-May-06 01:16:27 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666796 26.869305555555552 2010-May-06 01:16:27 LOG4 log_alfabeam: ALFABEAM 1 15.723036654947027 26.765411448722887 2010-May-06 01:16:27 LOG4 log_alfabeam: ALFABEAM 2 15.727954174040526 26.837827313365707 2010-May-06 01:16:27 LOG4 log_alfabeam: ALFABEAM 3 15.726389723772979 26.941900405025361 2010-May-06 01:16:27 LOG4 log_alfabeam: ALFABEAM 4 15.719761900933536 26.973141601190978 2010-May-06 01:16:27 LOG4 log_alfabeam: ALFABEAM 5 15.714825957330088 26.899813081826313 2010-May-06 01:16:27 LOG4 log_alfabeam: ALFABEAM 6 15.716536021554298 26.796164757300431 2010-May-06 01:16:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600023 2010-May-06 01:16:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:16:28 LOG5 begin_task: Level: (4) ID = <10502> Status = 0 0 0 0 ok 2010-May-06 01:16:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:16:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-06 01:16:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:16:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:16:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:16:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-May-06 01:16:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18989.00 2010-May-06 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:16:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:16:39 LOG5 end_task: Level: (4) ID = <10502> Status = 0 0 0 0 ok 2010-May-06 01:16:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:16:39 LOG5 end_task: Level: (3) ID = <10501> Status = 0 0 0 0 ok 2010-May-06 01:16:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-May-06 01:16:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-06 01:16:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-06 01:16:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 01:16:39 LOG5 begin_task: Level: (3) ID = <10503> Status = 0 0 0 0 ok 2010-May-06 01:16:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 01:16:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-06 01:16:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 01:16:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 01:16:39 LOG5 end_task: Level: (3) ID = <10503> Status = 0 0 0 0 ok 2010-May-06 01:16:39 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-May-06 01:16:39 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-May-06 01:16:39 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-May-06 01:16:39 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:16:39 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34511 J 2010-May-06 01:16:39 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:16:39 LOG2 antvel: Parameters to Doppler: Topocentric 18999 2010 126 0.0 2010-May-06 01:16:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:16:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-May-06 01:16:39 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-May-06 01:16:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:16:39 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:16:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-06 01:16:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:16:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-May-06 01:16:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:16:39 LOG5 begin_task: Level: (3) ID = <10504> Status = 0 0 0 0 ok 2010-May-06 01:16:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-May-06 01:16:39 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.757986 2010.3451149326945 18.999933 2010-May-06 01:16:39 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666693 26.869305555555549 2010-May-06 01:16:39 LOG4 log_alfabeam: ALFABEAM 1 15.723080229717082 26.765534912790415 2010-May-06 01:16:39 LOG4 log_alfabeam: ALFABEAM 2 15.727967308436007 26.838319522491663 2010-May-06 01:16:39 LOG4 log_alfabeam: ALFABEAM 3 15.726359133221184 26.942273279967385 2010-May-06 01:16:39 LOG4 log_alfabeam: ALFABEAM 4 15.719718280795339 26.973015533934397 2010-May-06 01:16:39 LOG4 log_alfabeam: ALFABEAM 5 15.714813265412111 26.899317113807438 2010-May-06 01:16:39 LOG4 log_alfabeam: ALFABEAM 6 15.716566794871417 26.795798963904812 2010-May-06 01:16:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600024 2010-May-06 01:16:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:16:40 LOG5 begin_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2010-May-06 01:16:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:16:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-06 01:16:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:16:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:16:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:16:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-May-06 01:16:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19001.00 2010-May-06 01:16:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:16:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:16:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:16:51 LOG5 end_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2010-May-06 01:16:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:16:51 LOG5 end_task: Level: (3) ID = <10504> Status = 0 0 0 0 ok 2010-May-06 01:16:51 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-May-06 01:16:51 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-May-06 01:16:51 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-May-06 01:16:51 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:16:51 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:16:51 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:16:51 LOG2 antvel: Parameters to Doppler: Topocentric 19011 2010 126 0.0 2010-May-06 01:16:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:16:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-May-06 01:16:51 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-May-06 01:16:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:16:51 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:16:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-06 01:16:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:16:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-May-06 01:16:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:16:51 LOG5 begin_task: Level: (3) ID = <10506> Status = 0 0 0 0 ok 2010-May-06 01:16:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-May-06 01:16:51 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.761328 2010.3451153129515 18.999933 2010-May-06 01:16:51 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666659 26.869305555555552 2010-May-06 01:16:51 LOG4 log_alfabeam: ALFABEAM 1 15.723123717662899 26.765661549762576 2010-May-06 01:16:51 LOG4 log_alfabeam: ALFABEAM 2 15.727980226470066 26.838812329419959 2010-May-06 01:16:51 LOG4 log_alfabeam: ALFABEAM 3 15.726328409653465 26.942643559064212 2010-May-06 01:16:51 LOG4 log_alfabeam: ALFABEAM 4 15.719674749847275 26.972886294855517 2010-May-06 01:16:51 LOG4 log_alfabeam: ALFABEAM 5 15.714800792774973 26.898820612492305 2010-May-06 01:16:51 LOG4 log_alfabeam: ALFABEAM 6 15.716597694840479 26.795435787471867 2010-May-06 01:16:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600025 2010-May-06 01:16:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:16:52 LOG5 begin_task: Level: (4) ID = <10507> Status = 0 0 0 0 ok 2010-May-06 01:16:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:16:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-06 01:16:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:16:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:16:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:16:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-May-06 01:16:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19013.00 2010-May-06 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:17:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:17:03 LOG5 end_task: Level: (4) ID = <10507> Status = 0 0 0 0 ok 2010-May-06 01:17:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:17:03 LOG5 end_task: Level: (3) ID = <10506> Status = 0 0 0 0 ok 2010-May-06 01:17:03 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-May-06 01:17:03 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-May-06 01:17:03 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-May-06 01:17:03 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:17:03 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:17:03 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:17:03 LOG2 antvel: Parameters to Doppler: Topocentric 19023 2010 126 0.0 2010-May-06 01:17:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:17:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-May-06 01:17:03 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-May-06 01:17:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:17:03 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:17:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-06 01:17:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:17:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-May-06 01:17:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:17:03 LOG5 begin_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2010-May-06 01:17:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-May-06 01:17:03 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.764671 2010.3451156932085 18.999933 2010-May-06 01:17:03 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666693 26.869305555555552 2010-May-06 01:17:03 LOG4 log_alfabeam: ALFABEAM 1 15.723167141054368 26.765791419138058 2010-May-06 01:17:03 LOG4 log_alfabeam: ALFABEAM 2 15.727992935041362 26.839305984138125 2010-May-06 01:17:03 LOG4 log_alfabeam: ALFABEAM 3 15.726297537639516 26.943011434557636 2010-May-06 01:17:03 LOG4 log_alfabeam: ALFABEAM 4 15.719631285797416 26.972753823364631 2010-May-06 01:17:03 LOG4 log_alfabeam: ALFABEAM 5 15.714788532701457 26.898323326241375 2010-May-06 01:17:03 LOG4 log_alfabeam: ALFABEAM 6 15.716628736975812 26.795075038698574 2010-May-06 01:17:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600026 2010-May-06 01:17:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:17:04 LOG5 begin_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2010-May-06 01:17:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:17:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-06 01:17:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:17:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:17:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:17:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-May-06 01:17:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19025.00 2010-May-06 01:17:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:17:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:17:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:17:15 LOG5 end_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2010-May-06 01:17:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:17:15 LOG5 end_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2010-May-06 01:17:15 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-May-06 01:17:15 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-May-06 01:17:15 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-May-06 01:17:15 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:17:15 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:17:15 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:17:15 LOG2 antvel: Parameters to Doppler: Topocentric 19035 2010 126 0.0 2010-May-06 01:17:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:17:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-May-06 01:17:15 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-May-06 01:17:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:17:15 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:17:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-06 01:17:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:17:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-May-06 01:17:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:17:15 LOG5 begin_task: Level: (3) ID = <10510> Status = 0 0 0 0 ok 2010-May-06 01:17:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-May-06 01:17:15 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.768013 2010.3451160734658 18.999933 2010-May-06 01:17:15 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666707 26.869305555555552 2010-May-06 01:17:15 LOG4 log_alfabeam: ALFABEAM 1 15.723210470186517 26.765924426139193 2010-May-06 01:17:15 LOG4 log_alfabeam: ALFABEAM 2 15.728005425771945 26.839800146293271 2010-May-06 01:17:15 LOG4 log_alfabeam: ALFABEAM 3 15.726266538635317 26.943376657728205 2010-May-06 01:17:15 LOG4 log_alfabeam: ALFABEAM 4 15.719587918379041 26.972618216260841 2010-May-06 01:17:15 LOG4 log_alfabeam: ALFABEAM 5 15.714776493215833 26.897825598115094 2010-May-06 01:17:15 LOG4 log_alfabeam: ALFABEAM 6 15.716659899701057 26.794716960724820 2010-May-06 01:17:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600027 2010-May-06 01:17:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:17:16 LOG5 begin_task: Level: (4) ID = <10511> Status = 0 0 0 0 ok 2010-May-06 01:17:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:17:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-06 01:17:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:17:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:17:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:17:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-May-06 01:17:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19037.00 2010-May-06 01:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:17:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:17:27 LOG5 end_task: Level: (4) ID = <10511> Status = 0 0 0 0 ok 2010-May-06 01:17:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:17:27 LOG5 end_task: Level: (3) ID = <10510> Status = 0 0 0 0 ok 2010-May-06 01:17:27 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-May-06 01:17:27 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-May-06 01:17:27 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-May-06 01:17:27 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:17:27 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:17:27 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:17:27 LOG2 antvel: Parameters to Doppler: Topocentric 19047 2010 126 0.0 2010-May-06 01:17:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:17:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-May-06 01:17:27 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-May-06 01:17:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:17:27 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:17:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-06 01:17:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:17:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-May-06 01:17:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:17:27 LOG5 begin_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2010-May-06 01:17:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-May-06 01:17:27 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.771356 2010.3451164537228 18.999933 2010-May-06 01:17:27 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666732 26.869305555555570 2010-May-06 01:17:27 LOG4 log_alfabeam: ALFABEAM 1 15.723253727289407 26.766060632483356 2010-May-06 01:17:27 LOG4 log_alfabeam: ALFABEAM 2 15.728017705418480 26.840295066494818 2010-May-06 01:17:27 LOG4 log_alfabeam: ALFABEAM 3 15.726235397106947 26.943739419214122 2010-May-06 01:17:27 LOG4 log_alfabeam: ALFABEAM 4 15.719544625341346 26.972479410733865 2010-May-06 01:17:27 LOG4 log_alfabeam: ALFABEAM 5 15.714764667744593 26.897327175880669 2010-May-06 01:17:27 LOG4 log_alfabeam: ALFABEAM 6 15.716691198631255 26.794361365867932 2010-May-06 01:17:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600028 2010-May-06 01:17:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:17:28 LOG5 begin_task: Level: (4) ID = <10513> Status = 0 0 0 0 ok 2010-May-06 01:17:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:17:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-06 01:17:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:17:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:17:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:17:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-May-06 01:17:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19049.00 2010-May-06 01:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:17:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:17:39 LOG5 end_task: Level: (4) ID = <10513> Status = 0 0 0 0 ok 2010-May-06 01:17:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:17:39 LOG5 end_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2010-May-06 01:17:39 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-May-06 01:17:39 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-May-06 01:17:39 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-May-06 01:17:39 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:17:39 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:17:39 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:17:39 LOG2 antvel: Parameters to Doppler: Topocentric 19059 2010 126 0.0 2010-May-06 01:17:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:17:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-May-06 01:17:39 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-May-06 01:17:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:17:39 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:17:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-06 01:17:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:17:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-May-06 01:17:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:17:39 LOG5 begin_task: Level: (3) ID = <10514> Status = 0 0 0 0 ok 2010-May-06 01:17:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-May-06 01:17:39 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.774698 2010.3451168339798 18.999933 2010-May-06 01:17:39 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666682 26.869305555555560 2010-May-06 01:17:39 LOG4 log_alfabeam: ALFABEAM 1 15.723296882815530 26.766199938029548 2010-May-06 01:17:39 LOG4 log_alfabeam: ALFABEAM 2 15.728029765973700 26.840790403484196 2010-May-06 01:17:39 LOG4 log_alfabeam: ALFABEAM 3 15.726204134729569 26.944099474797891 2010-May-06 01:17:39 LOG4 log_alfabeam: ALFABEAM 4 15.719501436255358 26.972337508941010 2010-May-06 01:17:39 LOG4 log_alfabeam: ALFABEAM 5 15.714753063936135 26.896828403378052 2010-May-06 01:17:39 LOG4 log_alfabeam: ALFABEAM 6 15.716722611982954 26.794008492734868 2010-May-06 01:17:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600029 2010-May-06 01:17:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:17:40 LOG5 begin_task: Level: (4) ID = <10515> Status = 0 0 0 0 ok 2010-May-06 01:17:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:17:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-06 01:17:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:17:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:17:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:17:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-May-06 01:17:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19061.00 2010-May-06 01:17:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:17:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:17:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:17:51 LOG5 end_task: Level: (4) ID = <10515> Status = 0 0 0 0 ok 2010-May-06 01:17:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:17:51 LOG5 end_task: Level: (3) ID = <10514> Status = 0 0 0 0 ok 2010-May-06 01:17:51 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-May-06 01:17:51 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-May-06 01:17:51 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-May-06 01:17:51 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:17:51 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:17:51 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:17:51 LOG2 antvel: Parameters to Doppler: Topocentric 19071 2010 126 0.0 2010-May-06 01:17:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:17:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-May-06 01:17:51 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-May-06 01:17:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:17:51 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:17:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-06 01:17:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:17:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-May-06 01:17:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:17:51 LOG5 begin_task: Level: (3) ID = <10516> Status = 0 0 0 0 ok 2010-May-06 01:17:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-May-06 01:17:51 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.778040 2010.3451172142368 18.999933 2010-May-06 01:17:51 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666734 26.869305555555552 2010-May-06 01:17:51 LOG4 log_alfabeam: ALFABEAM 1 15.723339946080959 26.766342363631249 2010-May-06 01:17:51 LOG4 log_alfabeam: ALFABEAM 2 15.728041610539487 26.841286260021370 2010-May-06 01:17:51 LOG4 log_alfabeam: ALFABEAM 3 15.726172745277958 26.944456906931467 2010-May-06 01:17:51 LOG4 log_alfabeam: ALFABEAM 4 15.719458341794189 26.972192489709670 2010-May-06 01:17:51 LOG4 log_alfabeam: ALFABEAM 5 15.714741678735869 26.896329177251125 2010-May-06 01:17:51 LOG4 log_alfabeam: ALFABEAM 6 15.716754146017022 26.793658259689337 2010-May-06 01:17:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600030 2010-May-06 01:17:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:17:52 LOG5 begin_task: Level: (4) ID = <10517> Status = 0 0 0 0 ok 2010-May-06 01:17:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:17:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-06 01:17:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:17:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:17:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:17:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-May-06 01:17:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19073.00 2010-May-06 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:18:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:18:03 LOG5 end_task: Level: (4) ID = <10517> Status = 0 0 0 0 ok 2010-May-06 01:18:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:18:03 LOG5 end_task: Level: (3) ID = <10516> Status = 0 0 0 0 ok 2010-May-06 01:18:03 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-May-06 01:18:03 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-May-06 01:18:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-May-06 01:18:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-06 01:18:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-06 01:18:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 01:18:03 LOG5 begin_task: Level: (3) ID = <10518> Status = 0 0 0 0 ok 2010-May-06 01:18:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 01:18:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-06 01:18:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 01:18:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 01:18:03 LOG5 end_task: Level: (3) ID = <10518> Status = 0 0 0 0 ok 2010-May-06 01:18:03 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-May-06 01:18:03 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-May-06 01:18:03 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-May-06 01:18:03 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-May-06 01:18:03 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:18:03 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:18:03 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:18:03 LOG2 antvel: Parameters to Doppler: Topocentric 19083 2010 126 0.0 2010-May-06 01:18:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:18:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-May-06 01:18:03 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-May-06 01:18:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:18:03 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:18:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-06 01:18:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:18:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-May-06 01:18:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:18:03 LOG5 begin_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2010-May-06 01:18:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-May-06 01:18:03 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.781383 2010.3451175944938 18.999933 2010-May-06 01:18:03 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666741 26.869305555555552 2010-May-06 01:18:03 LOG4 log_alfabeam: ALFABEAM 1 15.723382926324961 26.766487933118313 2010-May-06 01:18:03 LOG4 log_alfabeam: ALFABEAM 2 15.728053242016463 26.841782739464602 2010-May-06 01:18:03 LOG4 log_alfabeam: ALFABEAM 3 15.726141222400367 26.944811795671836 2010-May-06 01:18:03 LOG4 log_alfabeam: ALFABEAM 4 15.719415332710799 26.972044328891950 2010-May-06 01:18:03 LOG4 log_alfabeam: ALFABEAM 5 15.714730509293002 26.895829393599840 2010-May-06 01:18:03 LOG4 log_alfabeam: ALFABEAM 6 15.716785807116143 26.793310587508653 2010-May-06 01:18:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600031 2010-May-06 01:18:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:18:04 LOG5 begin_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2010-May-06 01:18:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:18:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-06 01:18:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:18:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:18:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:18:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-May-06 01:18:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19085.00 2010-May-06 01:18:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:18:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:18:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:18:15 LOG5 end_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2010-May-06 01:18:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:18:15 LOG5 end_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2010-May-06 01:18:15 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-May-06 01:18:15 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-May-06 01:18:15 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-May-06 01:18:15 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:18:15 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:18:15 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:18:15 LOG2 antvel: Parameters to Doppler: Topocentric 19095 2010 126 0.0 2010-May-06 01:18:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:18:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-May-06 01:18:15 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-May-06 01:18:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:18:15 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:18:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-06 01:18:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:18:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-May-06 01:18:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:18:15 LOG5 begin_task: Level: (3) ID = <10521> Status = 0 0 0 0 ok 2010-May-06 01:18:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-May-06 01:18:15 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.784725 2010.345117974751 18.999933 2010-May-06 01:18:15 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666764 26.869305555555552 2010-May-06 01:18:15 LOG4 log_alfabeam: ALFABEAM 1 15.723425794264056 26.766636538473836 2010-May-06 01:18:15 LOG4 log_alfabeam: ALFABEAM 2 15.728064652957134 26.842279499551459 2010-May-06 01:18:15 LOG4 log_alfabeam: ALFABEAM 3 15.726109588076328 26.945163903745275 2010-May-06 01:18:15 LOG4 log_alfabeam: ALFABEAM 4 15.719372438304914 26.971893136508971 2010-May-06 01:18:15 LOG4 log_alfabeam: ALFABEAM 5 15.714719562689794 26.895329397075127 2010-May-06 01:18:15 LOG4 log_alfabeam: ALFABEAM 6 15.716817573210552 26.792965707821317 2010-May-06 01:18:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600032 2010-May-06 01:18:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:18:16 LOG5 begin_task: Level: (4) ID = <10522> Status = 0 0 0 0 ok 2010-May-06 01:18:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:18:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-06 01:18:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:18:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:18:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:18:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-May-06 01:18:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19097.00 2010-May-06 01:18:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:18:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:18:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:18:27 LOG5 end_task: Level: (4) ID = <10522> Status = 0 0 0 0 ok 2010-May-06 01:18:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:18:27 LOG5 end_task: Level: (3) ID = <10521> Status = 0 0 0 0 ok 2010-May-06 01:18:27 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-May-06 01:18:27 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-May-06 01:18:27 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-May-06 01:18:27 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:18:27 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:18:27 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:18:27 LOG2 antvel: Parameters to Doppler: Topocentric 19107 2010 126 0.0 2010-May-06 01:18:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:18:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-May-06 01:18:27 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-May-06 01:18:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:18:27 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:18:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-06 01:18:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:18:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-May-06 01:18:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:18:27 LOG5 begin_task: Level: (3) ID = <10523> Status = 0 0 0 0 ok 2010-May-06 01:18:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-May-06 01:18:27 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.788068 2010.345118355008 18.999933 2010-May-06 01:18:27 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666734 26.869305555555549 2010-May-06 01:18:27 LOG4 log_alfabeam: ALFABEAM 1 15.723468572017042 26.766788246959749 2010-May-06 01:18:27 LOG4 log_alfabeam: ALFABEAM 2 15.728075849758186 26.842776792327360 2010-May-06 01:18:27 LOG4 log_alfabeam: ALFABEAM 3 15.726077826518980 26.945513417664078 2010-May-06 01:18:27 LOG4 log_alfabeam: ALFABEAM 4 15.719329636440087 26.971738844201596 2010-May-06 01:18:27 LOG4 log_alfabeam: ALFABEAM 5 15.714708832717198 26.894828934081264 2010-May-06 01:18:27 LOG4 log_alfabeam: ALFABEAM 6 15.716849460160860 26.792623437112361 2010-May-06 01:18:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600033 2010-May-06 01:18:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:18:28 LOG5 begin_task: Level: (4) ID = <10524> Status = 0 0 0 0 ok 2010-May-06 01:18:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:18:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-06 01:18:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:18:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:18:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:18:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-May-06 01:18:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19109.00 2010-May-06 01:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:18:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:18:39 LOG5 end_task: Level: (4) ID = <10524> Status = 0 0 0 0 ok 2010-May-06 01:18:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:18:39 LOG5 end_task: Level: (3) ID = <10523> Status = 0 0 0 0 ok 2010-May-06 01:18:39 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-May-06 01:18:39 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-May-06 01:18:39 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-May-06 01:18:39 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:18:39 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:18:39 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:18:39 LOG2 antvel: Parameters to Doppler: Topocentric 19119 2010 126 0.0 2010-May-06 01:18:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:18:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-May-06 01:18:39 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-May-06 01:18:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:18:39 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:18:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-06 01:18:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:18:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-May-06 01:18:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:18:39 LOG5 begin_task: Level: (3) ID = <10525> Status = 0 0 0 0 ok 2010-May-06 01:18:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-May-06 01:18:39 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.791410 2010.345118735265 18.999933 2010-May-06 01:18:39 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666659 26.869305555555549 2010-May-06 01:18:39 LOG4 log_alfabeam: ALFABEAM 1 15.723511230494809 26.766942945432284 2010-May-06 01:18:39 LOG4 log_alfabeam: ALFABEAM 2 15.728086825346445 26.843274275096348 2010-May-06 01:18:39 LOG4 log_alfabeam: ALFABEAM 3 15.726045959893957 26.945860104899630 2010-May-06 01:18:39 LOG4 log_alfabeam: ALFABEAM 4 15.719286956217541 26.971581567107368 2010-May-06 01:18:39 LOG4 log_alfabeam: ALFABEAM 5 15.714698326078944 26.894328349572312 2010-May-06 01:18:39 LOG4 log_alfabeam: ALFABEAM 6 15.716881445723290 26.792284002250092 2010-May-06 01:18:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600034 2010-May-06 01:18:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:18:40 LOG5 begin_task: Level: (4) ID = <10526> Status = 0 0 0 0 ok 2010-May-06 01:18:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:18:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-06 01:18:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:18:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:18:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:18:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-May-06 01:18:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19121.00 2010-May-06 01:18:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:18:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:18:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:18:51 LOG5 end_task: Level: (4) ID = <10526> Status = 0 0 0 0 ok 2010-May-06 01:18:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:18:51 LOG5 end_task: Level: (3) ID = <10525> Status = 0 0 0 0 ok 2010-May-06 01:18:51 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-May-06 01:18:51 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-May-06 01:18:51 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-May-06 01:18:51 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:18:51 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:18:51 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:18:51 LOG2 antvel: Parameters to Doppler: Topocentric 19131 2010 126 0.0 2010-May-06 01:18:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:18:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-May-06 01:18:51 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-May-06 01:18:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:18:51 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:18:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-06 01:18:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:18:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-May-06 01:18:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:18:51 LOG5 begin_task: Level: (3) ID = <10527> Status = 0 0 0 0 ok 2010-May-06 01:18:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-May-06 01:18:51 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.794753 2010.345119115522 18.999933 2010-May-06 01:18:51 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666686 26.869305555555545 2010-May-06 01:18:51 LOG4 log_alfabeam: ALFABEAM 1 15.723553791766610 26.767100703371565 2010-May-06 01:18:51 LOG4 log_alfabeam: ALFABEAM 2 15.728097585972677 26.843772200429253 2010-May-06 01:18:51 LOG4 log_alfabeam: ALFABEAM 3 15.726013972315910 26.946204150264069 2010-May-06 01:18:51 LOG4 log_alfabeam: ALFABEAM 4 15.719244375551598 26.971421234647405 2010-May-06 01:18:51 LOG4 log_alfabeam: ALFABEAM 5 15.714688036714490 26.893827389457275 2010-May-06 01:18:51 LOG4 log_alfabeam: ALFABEAM 6 15.716913545854315 26.791947221436377 2010-May-06 01:18:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600035 2010-May-06 01:18:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:18:52 LOG5 begin_task: Level: (4) ID = <10528> Status = 0 0 0 0 ok 2010-May-06 01:18:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:18:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-06 01:18:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:18:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:18:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:18:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-May-06 01:18:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19133.00 2010-May-06 01:18:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:18:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:18:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:19:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:19:03 LOG5 end_task: Level: (4) ID = <10528> Status = 0 0 0 0 ok 2010-May-06 01:19:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:19:03 LOG5 end_task: Level: (3) ID = <10527> Status = 0 0 0 0 ok 2010-May-06 01:19:03 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-May-06 01:19:03 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-May-06 01:19:03 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-May-06 01:19:03 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:19:03 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:19:03 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:19:03 LOG2 antvel: Parameters to Doppler: Topocentric 19143 2010 126 0.0 2010-May-06 01:19:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:19:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-May-06 01:19:03 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-May-06 01:19:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:19:03 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:19:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-06 01:19:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:19:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-May-06 01:19:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:19:03 LOG5 begin_task: Level: (3) ID = <10529> Status = 0 0 0 0 ok 2010-May-06 01:19:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-May-06 01:19:03 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.798095 2010.345119495779 18.999933 2010-May-06 01:19:03 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666714 26.869305555555563 2010-May-06 01:19:03 LOG4 log_alfabeam: ALFABEAM 1 15.723596226951384 26.767261402614345 2010-May-06 01:19:03 LOG4 log_alfabeam: ALFABEAM 2 15.728108124938551 26.844270225384065 2010-May-06 01:19:03 LOG4 log_alfabeam: ALFABEAM 3 15.725981886123172 26.946545326056526 2010-May-06 01:19:03 LOG4 log_alfabeam: ALFABEAM 4 15.719201923330960 26.971257966965943 2010-May-06 01:19:03 LOG4 log_alfabeam: ALFABEAM 5 15.714677970948912 26.893326398804493 2010-May-06 01:19:03 LOG4 log_alfabeam: ALFABEAM 6 15.716945738149471 26.791613316702851 2010-May-06 01:19:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600036 2010-May-06 01:19:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:19:04 LOG5 begin_task: Level: (4) ID = <10530> Status = 0 0 0 0 ok 2010-May-06 01:19:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:19:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-06 01:19:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:19:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:19:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:19:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-May-06 01:19:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19145.00 2010-May-06 01:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:19:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:19:15 LOG5 end_task: Level: (4) ID = <10530> Status = 0 0 0 0 ok 2010-May-06 01:19:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:19:15 LOG5 end_task: Level: (3) ID = <10529> Status = 0 0 0 0 ok 2010-May-06 01:19:15 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-May-06 01:19:15 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-May-06 01:19:15 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-May-06 01:19:15 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:19:15 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:19:15 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:19:15 LOG2 antvel: Parameters to Doppler: Topocentric 19155 2010 126 0.0 2010-May-06 01:19:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:19:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-May-06 01:19:15 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-May-06 01:19:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:19:15 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:19:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-06 01:19:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:19:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-May-06 01:19:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:19:15 LOG5 begin_task: Level: (3) ID = <10531> Status = 0 0 0 0 ok 2010-May-06 01:19:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-May-06 01:19:15 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.801438 2010.3451198760363 18.999933 2010-May-06 01:19:15 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666721 26.869305555555549 2010-May-06 01:19:15 LOG4 log_alfabeam: ALFABEAM 1 15.723638558065854 26.767425114859417 2010-May-06 01:19:15 LOG4 log_alfabeam: ALFABEAM 2 15.728118448347137 26.844768603027777 2010-May-06 01:19:15 LOG4 log_alfabeam: ALFABEAM 3 15.725949685333092 26.946883815359037 2010-May-06 01:19:15 LOG4 log_alfabeam: ALFABEAM 4 15.719159577523616 26.971091691264068 2010-May-06 01:19:15 LOG4 log_alfabeam: ALFABEAM 5 15.714668122870970 26.892825123057460 2010-May-06 01:19:15 LOG4 log_alfabeam: ALFABEAM 6 15.716978038658926 26.791282107998100 2010-May-06 01:19:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600037 2010-May-06 01:19:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:19:16 LOG5 begin_task: Level: (4) ID = <10532> Status = 0 0 0 0 ok 2010-May-06 01:19:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:19:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-06 01:19:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:19:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:19:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:19:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-May-06 01:19:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19157.00 2010-May-06 01:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:19:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:19:27 LOG5 end_task: Level: (4) ID = <10532> Status = 0 0 0 0 ok 2010-May-06 01:19:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:19:27 LOG5 end_task: Level: (3) ID = <10531> Status = 0 0 0 0 ok 2010-May-06 01:19:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-May-06 01:19:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-06 01:19:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-06 01:19:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 01:19:27 LOG5 begin_task: Level: (3) ID = <10533> Status = 0 0 0 0 ok 2010-May-06 01:19:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 01:19:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-06 01:19:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 01:19:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 01:19:27 LOG5 end_task: Level: (3) ID = <10533> Status = 0 0 0 0 ok 2010-May-06 01:19:27 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-May-06 01:19:27 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-May-06 01:19:27 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-May-06 01:19:27 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:19:27 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:19:27 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:19:27 LOG2 antvel: Parameters to Doppler: Topocentric 19167 2010 126 0.0 2010-May-06 01:19:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:19:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-May-06 01:19:27 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-May-06 01:19:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:19:27 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:19:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-06 01:19:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:19:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-May-06 01:19:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:19:27 LOG5 begin_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2010-May-06 01:19:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-May-06 01:19:27 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.804780 2010.3451202562933 18.999933 2010-May-06 01:19:27 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666693 26.869305555555552 2010-May-06 01:19:27 LOG4 log_alfabeam: ALFABEAM 1 15.723680756450202 26.767591717038471 2010-May-06 01:19:27 LOG4 log_alfabeam: ALFABEAM 2 15.728128549875066 26.845266990358240 2010-May-06 01:19:27 LOG4 log_alfabeam: ALFABEAM 3 15.725917392443106 26.947219395372560 2010-May-06 01:19:27 LOG4 log_alfabeam: ALFABEAM 4 15.719117366792393 26.970922532576331 2010-May-06 01:19:27 LOG4 log_alfabeam: ALFABEAM 5 15.714658498428211 26.892323907212049 2010-May-06 01:19:27 LOG4 log_alfabeam: ALFABEAM 6 15.717010424831910 26.790953812449164 2010-May-06 01:19:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600038 2010-May-06 01:19:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:19:28 LOG5 begin_task: Level: (4) ID = <10535> Status = 0 0 0 0 ok 2010-May-06 01:19:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:19:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-06 01:19:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:19:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:19:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:19:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-May-06 01:19:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19169.00 2010-May-06 01:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:19:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:19:39 LOG5 end_task: Level: (4) ID = <10535> Status = 0 0 0 0 ok 2010-May-06 01:19:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:19:39 LOG5 end_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2010-May-06 01:19:39 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-May-06 01:19:39 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-May-06 01:19:39 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-May-06 01:19:39 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:19:39 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:19:39 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:19:39 LOG2 antvel: Parameters to Doppler: Topocentric 19179 2010 126 0.0 2010-May-06 01:19:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:19:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-May-06 01:19:39 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-May-06 01:19:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:19:39 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:19:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-06 01:19:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:19:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-May-06 01:19:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:19:39 LOG5 begin_task: Level: (3) ID = <10536> Status = 0 0 0 0 ok 2010-May-06 01:19:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-May-06 01:19:39 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.808123 2010.3451206365503 18.999933 2010-May-06 01:19:39 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666700 26.869305555555552 2010-May-06 01:19:39 LOG4 log_alfabeam: ALFABEAM 1 15.723722844065714 26.767761283069458 2010-May-06 01:19:39 LOG4 log_alfabeam: ALFABEAM 2 15.728138435476334 26.845765640908393 2010-May-06 01:19:39 LOG4 log_alfabeam: ALFABEAM 3 15.725884991375068 26.947552247418042 2010-May-06 01:19:39 LOG4 log_alfabeam: ALFABEAM 4 15.719075269162140 26.970750415883309 2010-May-06 01:19:39 LOG4 log_alfabeam: ALFABEAM 5 15.714649091860123 26.891822496277076 2010-May-06 01:19:39 LOG4 log_alfabeam: ALFABEAM 6 15.717042912810504 26.790628251782174 2010-May-06 01:19:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600039 2010-May-06 01:19:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:19:40 LOG5 begin_task: Level: (4) ID = <10537> Status = 0 0 0 0 ok 2010-May-06 01:19:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:19:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-06 01:19:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:19:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:19:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:19:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-May-06 01:19:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19181.00 2010-May-06 01:19:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:19:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:19:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:19:51 LOG5 end_task: Level: (4) ID = <10537> Status = 0 0 0 0 ok 2010-May-06 01:19:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:19:51 LOG5 end_task: Level: (3) ID = <10536> Status = 0 0 0 0 ok 2010-May-06 01:19:51 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-May-06 01:19:51 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-May-06 01:19:51 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-May-06 01:19:51 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:19:51 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:19:51 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:19:51 LOG2 antvel: Parameters to Doppler: Topocentric 19191 2010 126 0.0 2010-May-06 01:19:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:19:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-May-06 01:19:51 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-May-06 01:19:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:19:51 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:19:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-06 01:19:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:19:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-May-06 01:19:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:19:51 LOG5 begin_task: Level: (3) ID = <10538> Status = 0 0 0 0 ok 2010-May-06 01:19:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-May-06 01:19:51 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.811465 2010.3451210168073 18.999933 2010-May-06 01:19:51 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666693 26.869305555555560 2010-May-06 01:19:51 LOG4 log_alfabeam: ALFABEAM 1 15.723764792486929 26.767933685099745 2010-May-06 01:19:51 LOG4 log_alfabeam: ALFABEAM 2 15.728148099201622 26.846264211799856 2010-May-06 01:19:51 LOG4 log_alfabeam: ALFABEAM 3 15.725852504771501 26.947882153663887 2010-May-06 01:19:51 LOG4 log_alfabeam: ALFABEAM 4 15.719033313057100 26.970575470987296 2010-May-06 01:19:51 LOG4 log_alfabeam: ALFABEAM 5 15.714639908737672 26.891321234991409 2010-May-06 01:19:51 LOG4 log_alfabeam: ALFABEAM 6 15.717075479911044 26.790305638160262 2010-May-06 01:19:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600040 2010-May-06 01:19:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:19:52 LOG5 begin_task: Level: (4) ID = <10539> Status = 0 0 0 0 ok 2010-May-06 01:19:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:19:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-06 01:19:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:19:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:19:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:19:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-May-06 01:19:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19193.00 2010-May-06 01:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:20:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:20:03 LOG5 end_task: Level: (4) ID = <10539> Status = 0 0 0 0 ok 2010-May-06 01:20:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:20:03 LOG5 end_task: Level: (3) ID = <10538> Status = 0 0 0 0 ok 2010-May-06 01:20:03 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-May-06 01:20:03 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-May-06 01:20:03 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-May-06 01:20:03 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:20:03 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:20:03 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:20:03 LOG2 antvel: Parameters to Doppler: Topocentric 19203 2010 126 0.0 2010-May-06 01:20:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:20:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-May-06 01:20:03 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-May-06 01:20:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:20:03 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:20:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-06 01:20:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:20:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-May-06 01:20:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:20:03 LOG5 begin_task: Level: (3) ID = <10540> Status = 0 0 0 0 ok 2010-May-06 01:20:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-May-06 01:20:03 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.814808 2010.3451213970645 18.999933 2010-May-06 01:20:03 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666682 26.869305555555563 2010-May-06 01:20:03 LOG4 log_alfabeam: ALFABEAM 1 15.723806623616241 26.768108999266854 2010-May-06 01:20:03 LOG4 log_alfabeam: ALFABEAM 2 15.728157546854465 26.846762957000163 2010-May-06 01:20:03 LOG4 log_alfabeam: ALFABEAM 3 15.725819916460509 26.948209293637838 2010-May-06 01:20:03 LOG4 log_alfabeam: ALFABEAM 4 15.718991476562051 26.970397620648065 2010-May-06 01:20:03 LOG4 log_alfabeam: ALFABEAM 5 15.714630943452677 26.890819867961188 2010-May-06 01:20:03 LOG4 log_alfabeam: ALFABEAM 6 15.717108142366083 26.789985795118927 2010-May-06 01:20:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600041 2010-May-06 01:20:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:20:04 LOG5 begin_task: Level: (4) ID = <10541> Status = 0 0 0 0 ok 2010-May-06 01:20:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:20:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-06 01:20:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:20:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:20:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:20:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-May-06 01:20:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19205.00 2010-May-06 01:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:20:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:20:15 LOG5 end_task: Level: (4) ID = <10541> Status = 0 0 0 0 ok 2010-May-06 01:20:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:20:15 LOG5 end_task: Level: (3) ID = <10540> Status = 0 0 0 0 ok 2010-May-06 01:20:15 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-May-06 01:20:15 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-May-06 01:20:15 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-May-06 01:20:15 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:20:15 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:20:15 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:20:15 LOG2 antvel: Parameters to Doppler: Topocentric 19215 2010 126 0.0 2010-May-06 01:20:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:20:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-May-06 01:20:15 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-May-06 01:20:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:20:15 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:20:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-06 01:20:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:20:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-May-06 01:20:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:20:15 LOG5 begin_task: Level: (3) ID = <10542> Status = 0 0 0 0 ok 2010-May-06 01:20:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-May-06 01:20:15 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.818150 2010.3451217773215 18.999933 2010-May-06 01:20:15 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666693 26.869305555555552 2010-May-06 01:20:15 LOG4 log_alfabeam: ALFABEAM 1 15.723848309274839 26.768287093060462 2010-May-06 01:20:15 LOG4 log_alfabeam: ALFABEAM 2 15.728166772858341 26.847261533936113 2010-May-06 01:20:15 LOG4 log_alfabeam: ALFABEAM 3 15.725787249215699 26.948533454532704 2010-May-06 01:20:15 LOG4 log_alfabeam: ALFABEAM 4 15.718949787850338 26.970216999307066 2010-May-06 01:20:15 LOG4 log_alfabeam: ALFABEAM 5 15.714622201201253 26.890318739486641 2010-May-06 01:20:15 LOG4 log_alfabeam: ALFABEAM 6 15.717140877372726 26.789668929806325 2010-May-06 01:20:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600042 2010-May-06 01:20:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:20:16 LOG5 begin_task: Level: (4) ID = <10543> Status = 0 0 0 0 ok 2010-May-06 01:20:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:20:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-06 01:20:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:20:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:20:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:20:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-May-06 01:20:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19217.00 2010-May-06 01:20:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:20:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:20:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:20:27 LOG5 end_task: Level: (4) ID = <10543> Status = 0 0 0 0 ok 2010-May-06 01:20:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:20:27 LOG5 end_task: Level: (3) ID = <10542> Status = 0 0 0 0 ok 2010-May-06 01:20:27 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-May-06 01:20:27 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-May-06 01:20:27 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-May-06 01:20:27 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:20:27 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:20:27 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:20:27 LOG2 antvel: Parameters to Doppler: Topocentric 19227 2010 126 0.0 2010-May-06 01:20:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:20:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-May-06 01:20:27 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-May-06 01:20:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:20:27 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:20:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-06 01:20:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:20:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-May-06 01:20:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:20:27 LOG5 begin_task: Level: (3) ID = <10544> Status = 0 0 0 0 ok 2010-May-06 01:20:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-May-06 01:20:27 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.821492 2010.3451221575785 18.999933 2010-May-06 01:20:27 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666665 26.869305555555552 2010-May-06 01:20:27 LOG4 log_alfabeam: ALFABEAM 1 15.723889858891198 26.768467990292653 2010-May-06 01:20:27 LOG4 log_alfabeam: ALFABEAM 2 15.728175780202362 26.847760047824909 2010-May-06 01:20:27 LOG4 log_alfabeam: ALFABEAM 3 15.725754496586008 26.948854718355975 2010-May-06 01:20:27 LOG4 log_alfabeam: ALFABEAM 4 15.718908237481683 26.970033582801065 2010-May-06 01:20:27 LOG4 log_alfabeam: ALFABEAM 5 15.714613679046106 26.889817743689157 2010-May-06 01:20:27 LOG4 log_alfabeam: ALFABEAM 6 15.717173691422026 26.789354961111613 2010-May-06 01:20:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600043 2010-May-06 01:20:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:20:28 LOG5 begin_task: Level: (4) ID = <10545> Status = 0 0 0 0 ok 2010-May-06 01:20:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-06 01:20:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:20:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:20:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:20:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:20:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-May-06 01:20:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19229.00 2010-May-06 01:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:20:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:20:39 LOG5 end_task: Level: (4) ID = <10545> Status = 0 0 0 0 ok 2010-May-06 01:20:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:20:39 LOG5 end_task: Level: (3) ID = <10544> Status = 0 0 0 0 ok 2010-May-06 01:20:39 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-May-06 01:20:39 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-May-06 01:20:39 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-May-06 01:20:39 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:20:39 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:20:39 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:20:39 LOG2 antvel: Parameters to Doppler: Topocentric 19239 2010 126 0.0 2010-May-06 01:20:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:20:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-May-06 01:20:39 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-May-06 01:20:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:20:39 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:20:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-06 01:20:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:20:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-May-06 01:20:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-06 01:20:39 LOG5 begin_task: Level: (3) ID = <10546> Status = 0 0 0 0 ok 2010-May-06 01:20:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-May-06 01:20:39 LOG5 log_alfabeam: Parameters: 15.721416666666668 26.869305555555556 15.824835 2010.3451225378356 18.999933 2010-May-06 01:20:39 LOG4 log_alfabeam: ALFABEAM 0 15.721416666666693 26.869305555555560 2010-May-06 01:20:39 LOG4 log_alfabeam: ALFABEAM 1 15.723931281780494 26.768651717562950 2010-May-06 01:20:39 LOG4 log_alfabeam: ALFABEAM 2 15.728184571668230 26.848258604034459 2010-May-06 01:20:39 LOG4 log_alfabeam: ALFABEAM 3 15.725721652024042 26.949173164455523 2010-May-06 01:20:39 LOG4 log_alfabeam: ALFABEAM 4 15.718866816131600 26.969847344183677 2010-May-06 01:20:39 LOG4 log_alfabeam: ALFABEAM 5 15.714605374259492 26.889316774597642 2010-May-06 01:20:39 LOG4 log_alfabeam: ALFABEAM 6 15.717206591096161 26.789043810591203 2010-May-06 01:20:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12600044 2010-May-06 01:20:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-06 01:20:40 LOG5 begin_task: Level: (4) ID = <10547> Status = 0 0 0 0 ok 2010-May-06 01:20:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-06 01:20:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-06 01:20:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:20:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:20:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:20:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-May-06 01:20:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19241.00 2010-May-06 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-06 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-06 01:20:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-06 01:20:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-06 01:20:51 LOG5 end_task: Level: (4) ID = <10547> Status = 0 0 0 0 ok 2010-May-06 01:20:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-06 01:20:51 LOG5 end_task: Level: (3) ID = <10546> Status = 0 0 0 0 ok 2010-May-06 01:20:51 INFO2 smartfreq: Switching off CAL 2010-May-06 01:20:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-06 01:20:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-06 01:20:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-06 01:20:51 LOG5 begin_task: Level: (3) ID = <10548> Status = 0 0 0 0 ok 2010-May-06 01:20:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-06 01:20:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-06 01:20:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-06 01:20:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-06 01:20:51 LOG5 end_task: Level: (3) ID = <10548> Status = 0 0 0 0 ok 2010-May-06 01:20:51 INFO3 restore_frequencies: Restoring original frequencies 2010-May-06 01:20:51 LOG5 antvel: Calling 'antvel 154317.100000 265209.500000 J Topocentric 0' 2010-May-06 01:20:51 LOG2 antvel: Precessing RA = 15:43:17.1 Dec = +26:52:09.5 Epoch = 2010.34512 J 2010-May-06 01:20:51 LOG2 antvel: Computed apparent RA = 15:43:45.4 Dec = +26:50:01.4 2010-May-06 01:20:51 LOG2 antvel: Parameters to Doppler: Topocentric 19251 2010 126 0.0 2010-May-06 01:20:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-06 01:20:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-May-06 01:20:51 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-May-06 01:20:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-06 01:20:51 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-06 01:20:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-06 01:20:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:20:51 STOP finish_task: Finishing task 'smart frequency switching' 2010-May-06 01:20:51 LOG5 finish_task: Level: (2) ID = <10479> Status = 0 0 0 0 ok 2010-May-06 01:20:51 DONE finish_task: DONE finished pattern: smart frequency switching 2010-May-06 01:20:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-06 01:20:51 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-May-06 01:20:51 LOG5 end_task: Level: (2) ID = <10479> Status = 0 0 0 0 ok 2010-May-06 01:20:51 NOTE run_command_file: DONE with command file processing 2010-May-06 01:20:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-06 01:20:52 STOP finish_task: Finishing task 'running command file 'command_galfasrc_mar10.cmd'' 2010-May-06 01:20:52 LOG5 finish_task: Level: (1) ID = <10455> Status = 0 0 0 0 ok 2010-May-06 01:20:52 DONE finish_task: DONE finished running: command file 'command_galfasrc_mar10.cmd' 2010-May-06 01:20:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-06 01:20:52 END end_task: Finishing task 'running command file 'command_galfasrc_mar10.cmd'' with status 'OK' 2010-May-06 01:20:52 LOG5 end_task: Level: (1) ID = <10455> Status = 0 0 0 0 ok 2010-May-06 01:20:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-06 01:20:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-06 01:20:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:20:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:21:17 ALERT CIMA-exit_cima: Exiting CIMA ... 2010-May-06 01:21:17 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2010-May-06 01:21:17 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2010-May-06 01:21:17 LOG3 vw_send: To DATATAKING: mvdata a2010 2010-May-06 01:21:18 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2010-May-06 01:21:18 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2010-May-06 01:21:18 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2010-May-06 01:21:18 NOTE CIMA-exit_cima: Cleaning up session ... 2010-May-06 01:21:18 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2010-May-06 01:21:18 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2010-May-06 01:21:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:21:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-06 01:21:20 LOG3 exec_msg: Closing socket